} else {
SV *pkgsv = newSVpvn("PerlIO", 6);
SV *layer = newSVpvn(name, len);
- ENTER;
+ CV *cv = get_cv("PerlIO::Layer::NoWarnings", FALSE);
+ ENTER;
SAVEINT(PL_in_load_module);
+ if (cv) {
+ SAVESPTR(PL_warnhook);
+ PL_warnhook = (SV *) cv;
+ }
PL_in_load_module++;
/*
* The two SVs are magically freed by load_module
return sv;
}
+XS(XS_PerlIO__Layer__NoWarnings)
+{
+ /* This is used as a %SIG{__WARN__} handler to supress warnings
+ during loading of layers.
+ */
+ dXSARGS;
+ if (items)
+ PerlIO_debug("warning:%s\n",SvPV_nolen(ST(0)));
+ XSRETURN(0);
+}
+
XS(XS_PerlIO__Layer__find)
{
dXSARGS;
__FILE__);
#endif
newXS("PerlIO::Layer::find", XS_PerlIO__Layer__find, __FILE__);
+ newXS("PerlIO::Layer::NoWarnings", XS_PerlIO__Layer__NoWarnings, __FILE__);
}
PerlIO_funcs *
*/
if ((f = PerlIOBase_dup(aTHX_ f, o, param, flags))) {
FILE *stdio = PerlIOSelf(o, PerlIOStdio)->stdio;
+ int fd = fileno(stdio);
+ char mode[8];
if (flags & PERLIO_DUP_FD) {
- int fd = PerlLIO_dup(fileno(stdio));
- if (fd >= 0) {
- char mode[8];
- stdio = PerlSIO_fdopen(fd, PerlIO_modestr(o,mode));
+ int dfd = PerlLIO_dup(fileno(stdio));
+ if (dfd >= 0) {
+ stdio = PerlSIO_fdopen(dfd, PerlIO_modestr(o,mode));
+ goto set_this;
}
else {
/* FIXME: To avoid messy error recovery if dup fails
*/
}
}
+ stdio = PerlSIO_fdopen(fd, PerlIO_modestr(o,mode));
+ set_this:
PerlIOSelf(f, PerlIOStdio)->stdio = stdio;
PerlIOUnix_refcnt_inc(fileno(stdio));
}
return f;
}
+static int
+PerlIOStdio_invalidate_fileno(pTHX_ FILE *f)
+{
+ /* XXX this could use PerlIO_canset_fileno() and
+ * PerlIO_set_fileno() support from Configure
+ */
+# if defined(__GLIBC__)
+ /* There may be a better way for GLIBC:
+ - libio.h defines a flag to not close() on cleanup
+ */
+ f->_fileno = -1;
+ return 1;
+# elif defined(__sun__)
+# if defined(_LP64)
+ /* On solaris, if _LP64 is defined, the FILE structure is this:
+ *
+ * struct FILE {
+ * long __pad[16];
+ * };
+ *
+ * It turns out that the fd is stored in the top 32 bits of
+ * file->__pad[4]. The lower 32 bits contain flags. file->pad[5] appears
+ * to contain a pointer or offset into another structure. All the
+ * remaining fields are zero.
+ *
+ * We set the top bits to -1 (0xFFFFFFFF).
+ */
+ f->__pad[4] |= 0xffffffff00000000L;
+ assert(fileno(f) == 0xffffffff);
+# else /* !defined(_LP64) */
+ /* _file is just a unsigned char :-(
+ Not clear why we dup() rather than using -1
+ even if that would be treated as 0xFF - so will
+ a dup fail ...
+ */
+ f->_file = PerlLIO_dup(fileno(f));
+# endif /* defined(_LP64) */
+ return 1;
+# elif defined(__hpux)
+ f->__fileH = 0xff;
+ f->__fileL = 0xff;
+ return 1;
+ /* Next one ->_file seems to be a reasonable fallback, i.e. if
+ your platform does not have special entry try this one.
+ [For OSF only have confirmation for Tru64 (alpha)
+ but assume other OSFs will be similar.]
+ */
+# elif defined(_AIX) || defined(__osf__) || defined(__irix__)
+ f->_file = -1;
+ return 1;
+# elif defined(__FreeBSD__)
+ /* There may be a better way on FreeBSD:
+ - we could insert a dummy func in the _close function entry
+ f->_close = (int (*)(void *)) dummy_close;
+ */
+ f->_file = -1;
+ return 1;
+# elif defined(__CYGWIN__)
+ /* There may be a better way on CYGWIN:
+ - we could insert a dummy func in the _close function entry
+ f->_close = (int (*)(void *)) dummy_close;
+ */
+ f->_file = -1;
+ return 1;
+# elif defined(WIN32)
+# if defined(__BORLANDC__)
+ f->fd = PerlLIO_dup(fileno(f));
+# else
+ f->_file = -1;
+# endif
+ return 1;
+# else
+#if 0
+ /* Sarathy's code did this - we fall back to a dup/dup2 hack
+ (which isn't thread safe) instead
+ */
+# error "Don't know how to set FILE.fileno on your platform"
+#endif
+ return 0;
+# endif
+}
+
IV
PerlIOStdio_close(pTHX_ PerlIO *f)
{
-#ifdef SOCKS5_VERSION_NAME
- int optval;
- Sock_size_t optlen = sizeof(int);
-#endif
FILE *stdio = PerlIOSelf(f, PerlIOStdio)->stdio;
if (!stdio) {
errno = EBADF;
return -1;
}
- if (PerlIOUnix_refcnt_dec(fileno(stdio)) > 0) {
- /* Do not close it but do flush any buffers */
- return PerlIO_flush(f);
- }
- return (
+ else {
+ int fd = fileno(stdio);
+ int socksfd = 0;
+ int invalidate = 0;
+ IV result = 0;
+ int saveerr = 0;
+ int dupfd = 0;
#ifdef SOCKS5_VERSION_NAME
- (getsockopt
- (PerlIO_fileno(f), SOL_SOCKET, SO_TYPE, (void *) &optval,
- &optlen) <
- 0) ? PerlSIO_fclose(stdio) : close(PerlIO_fileno(f))
-#else
- PerlSIO_fclose(stdio)
+ /* Socks lib overrides close() but stdio isn't linked to
+ that library (though we are) - so we must call close()
+ on sockets on stdio's behalf.
+ */
+ int optval;
+ Sock_size_t optlen = sizeof(int);
+ if (getsockopt(fd, SOL_SOCKET, SO_TYPE, (void *) &optval, &optlen) == 0) {
+ socksfd = 1;
+ invalidate = 1;
+ }
#endif
- );
-
+ if (PerlIOUnix_refcnt_dec(fd) > 0) {
+ /* File descriptor still in use */
+ invalidate = 1;
+ socksfd = 0;
+ }
+ if (invalidate) {
+ /* For STD* handles don't close the stdio at all
+ this is because we have shared the FILE * too
+ */
+ if (stdio == stdin) {
+ /* Some stdios are buggy fflush-ing inputs */
+ return 0;
+ }
+ else if (stdio == stdout || stdio == stderr) {
+ return PerlIO_flush(f);
+ }
+ /* Tricky - must fclose(stdio) to free memory but not close(fd)
+ Use Sarathy's trick from maint-5.6 to invalidate the
+ fileno slot of the FILE *
+ */
+ result = PerlIO_flush(f);
+ saveerr = errno;
+ if (!(invalidate = PerlIOStdio_invalidate_fileno(aTHX_ stdio))) {
+ dupfd = PerlLIO_dup(fd);
+ }
+ }
+ result = PerlSIO_fclose(stdio);
+ /* We treat error from stdio as success if we invalidated
+ errno may NOT be expected EBADF
+ */
+ if (invalidate && result != 0) {
+ errno = saveerr;
+ result = 0;
+ }
+ if (socksfd) {
+ /* in SOCKS case let close() determine return value */
+ result = close(fd);
+ }
+ if (dupfd) {
+ PerlLIO_dup2(dupfd,fd);
+ close(dupfd);
+ }
+ return result;
+ }
}
-
-
SSize_t
PerlIOStdio_read(pTHX_ PerlIO *f, void *vbuf, Size_t count)
{
FILE *s = PerlIOSelf(f, PerlIOStdio)->stdio;
SSize_t got = 0;
- if (count == 1) {
- STDCHAR *buf = (STDCHAR *) vbuf;
- /*
- * Perl is expecting PerlIO_getc() to fill the buffer Linux's
- * stdio does not do that for fread()
- */
- int ch = PerlSIO_fgetc(s);
- if (ch != EOF) {
- *buf = ch;
- got = 1;
+ for (;;) {
+ if (count == 1) {
+ STDCHAR *buf = (STDCHAR *) vbuf;
+ /*
+ * Perl is expecting PerlIO_getc() to fill the buffer Linux's
+ * stdio does not do that for fread()
+ */
+ int ch = PerlSIO_fgetc(s);
+ if (ch != EOF) {
+ *buf = ch;
+ got = 1;
+ }
}
+ else
+ got = PerlSIO_fread(vbuf, 1, count, s);
+ if (got || errno != EINTR)
+ break;
+ PERL_ASYNC_CHECK();
+ errno = 0; /* just in case */
}
- else
- got = PerlSIO_fread(vbuf, 1, count, s);
return got;
}
SSize_t
PerlIOStdio_write(pTHX_ PerlIO *f, const void *vbuf, Size_t count)
{
- return PerlSIO_fwrite(vbuf, 1, count,
- PerlIOSelf(f, PerlIOStdio)->stdio);
+ SSize_t got;
+ for (;;) {
+ got = PerlSIO_fwrite(vbuf, 1, count,
+ PerlIOSelf(f, PerlIOStdio)->stdio);
+ if (got || errno != EINTR)
+ break;
+ PERL_ASYNC_CHECK();
+ errno = 0; /* just in case */
+ }
+ return got;
}
IV
PerlIO_get_base(f);
if (!(PerlIOBase(f)->flags & PERLIO_F_CANWRITE))
return 0;
+ if (PerlIOBase(f)->flags & PERLIO_F_RDBUF) {
+ if (PerlIO_flush(f) != 0) {
+ return 0;
+ }
+ }
while (count > 0) {
SSize_t avail = b->bufsiz - (b->ptr - b->buf);
if ((SSize_t) count < avail)
* b->posn is file position where b->buf was read, or will be written
*/
Off_t posn = b->posn;
+ if ((PerlIOBase(f)->flags & PERLIO_F_APPEND) &&
+ (PerlIOBase(f)->flags & PERLIO_F_WRBUF)) {
+#if 1
+ /* As O_APPEND files are normally shared in some sense it is better
+ to flush :
+ */
+ PerlIO_flush(f);
+#else
+ /* when file is NOT shared then this is sufficient */
+ PerlIO_seek(PerlIONext(f),0, SEEK_END);
+#endif
+ posn = b->posn = PerlIO_tell(PerlIONext(f));
+ }
if (b->buf) {
/*
* If buffer is valid adjust position by amount in buffer
projects / p5sagit/p5-mst-13.2.git / blobdiff