#include <sys/fcntl.h>
#endif
+#ifdef VOIDUSED
+# undef VOIDUSED
+#endif
#define VOIDUSED 1
+
#ifdef PERL_MICRO
# include "uconfig.h"
#else
# endif
#endif
+/* undef WIN32 when building on Cygwin (for libwin32) - gph */
+#ifdef __CYGWIN__
+# undef WIN32
+# undef _WIN32
+#endif
+
/* Use the reentrant APIs like localtime_r and getpwent_r */
/* Win32 has naturally threadsafe libraries, no need to use any _r variants. */
#if defined(USE_ITHREADS) && !defined(USE_REENTRANT_API) && !defined(NETWARE) && !defined(WIN32) && !defined(__APPLE__)
# define MYSWAP
#endif
-/* Cannot include embed.h here on Win32 as win32.h has not
+/* Cannot include embed.h here on Win32 as win32.h has not
yet been included and defines some config variables e.g. HAVE_INTERP_INTERN
*/
#if !defined(PERL_FOR_X2P) && !(defined(WIN32)||defined(VMS))
# else
# define EMBEDMYMALLOC /* for compatibility */
# endif
+START_EXTERN_C
Malloc_t Perl_malloc (MEM_SIZE nbytes);
Malloc_t Perl_calloc (MEM_SIZE elements, MEM_SIZE size);
Malloc_t Perl_realloc (Malloc_t where, MEM_SIZE nbytes);
/* 'mfree' rather than 'free', since there is already a 'perl_free'
* that causes clashes with case-insensitive linkers */
Free_t Perl_mfree (Malloc_t where);
+END_EXTERN_C
typedef struct perl_mstats perl_mstats_t;
# endif
#endif
-#define Perl_atof(s) Perl_my_atof(s)
-#define Perl_atof2(s, np) Perl_my_atof2(s, np)
+/* The default is to use Perl's own atof() implementation (in numeric.c).
+ * Usually that is the one to use but for some platforms (e.g. UNICOS)
+ * it is however best to use the native implementation of atof.
+ * You can experiment with using your native one by -DUSE_PERL_ATOF=0.
+ * Some good tests to try out with either setting are t/base/num.t,
+ * t/op/numconvert.t, and t/op/pack.t. */
+
+#ifndef USE_PERL_ATOF
+# ifndef _UNICOS
+# define USE_PERL_ATOF
+# endif
+#else
+# if USE_PERL_ATOF == 0
+# undef USE_PERL_ATOF
+# endif
+#endif
+
+#ifdef USE_PERL_ATOF
+# define Perl_atof(s) Perl_my_atof(s)
+# define Perl_atof2(s, n) Perl_my_atof2(aTHX_ (s), &(n))
+#else
+# define Perl_atof(s) (NV)atof(s)
+# define Perl_atof2(s, n) ((n) = atof(s))
+#endif
/* Previously these definitions used hardcoded figures.
* It is hoped these formula are more portable, although
#define FILTER_DATA(idx) (AvARRAY(PL_rsfp_filters)[idx])
#define FILTER_ISREADER(idx) (idx >= AvFILLp(PL_rsfp_filters))
+#if defined(_AIX) && !defined(_AIX43)
+#if defined(USE_REENTRANT) || defined(_REENTRANT) || defined(_THREAD_SAFE)
+/* We cannot include <crypt.h> to get the struct crypt_data
+ * because of setkey prototype problems when threading */
+typedef struct crypt_data { /* straight from /usr/include/crypt.h */
+ /* From OSF, Not needed in AIX
+ char C[28], D[28];
+ */
+ char E[48];
+ char KS[16][48];
+ char block[66];
+ char iobuf[16];
+} CRYPTD;
+#endif /* threading */
+#endif /* AIX */
+
#if !defined(OS2) && !defined(MACOS_TRADITIONAL)
# include "iperlsys.h"
#endif
# define htovs(x) vtohs(x)
# endif
/* otherwise default to functions in util.c */
+#ifndef htovs
+short htovs(short n);
+short vtohs(short n);
+long htovl(long n);
+long vtohl(long n);
+#endif
#endif
/* *MAX Plus 1. A floating point value.
typedef int (CPERLscope(*runops_proc_t)) (pTHX);
typedef void (CPERLscope(*share_proc_t)) (pTHX_ SV *sv);
+typedef int (CPERLscope(*thrhook_proc_t)) (pTHX);
typedef OP* (CPERLscope(*PPADDR_t)[]) (pTHX);
/* _ (for $_) must be first in the following list (DEFSV requires it) */
END_EXTERN_C
struct am_table {
- long was_ok_sub;
+ U32 was_ok_sub;
long was_ok_am;
U32 flags;
CV* table[NofAMmeth];
long fallback;
};
struct am_table_short {
- long was_ok_sub;
+ U32 was_ok_sub;
long was_ok_am;
U32 flags;
};
#define STORE_NUMERIC_STANDARD_SET_LOCAL() /**/
#define RESTORE_NUMERIC_LOCAL() /**/
#define RESTORE_NUMERIC_STANDARD() /**/
-#define Atof Perl_atof
+#define Atof my_atof
#define IN_LOCALE_RUNTIME 0
#endif /* !USE_LOCALE_NUMERIC */
# ifdef __hpux
# define strtoll __strtoll /* secret handshake */
# endif
+# ifdef WIN64
+# define strtoll _strtoi64 /* secret handshake */
+# endif
# if !defined(Strtol) && defined(HAS_STRTOLL)
# define Strtol strtoll
# endif
* (as is done for Atoul(), see below) but for backward compatibility
* we just assume atol(). */
# if defined(USE_64_BIT_INT) && defined(IV_IS_QUAD) && QUADKIND == QUAD_IS_LONG_LONG && defined(HAS_ATOLL)
+# ifdef WIN64
+# define atoll _atoi64 /* secret handshake */
+# endif
# define Atol atoll
# else
# define Atol atol
# ifdef __hpux
# define strtoull __strtoull /* secret handshake */
# endif
+# ifdef WIN64
+# define strtoull _strtoui64 /* secret handshake */
+# endif
# if !defined(Strtoul) && defined(HAS_STRTOULL)
# define Strtoul strtoull
# endif
# define Atoul(s) Strtoul(s, (char **)NULL, 10)
#endif
-#if !defined(PERLIO_IS_STDIO) && defined(HASATTRIBUTE)
+#if !defined(PERLIO_IS_STDIO)
/*
- * Now we have __attribute__ out of the way
* Remap printf
*/
#undef printf
* Boilerplate macros for initializing and accessing interpreter-local
* data from C. All statics in extensions should be reworked to use
* this, if you want to make the extension thread-safe. See ext/re/re.xs
- * for an example of the use of these macros.
+ * for an example of the use of these macros, and perlxs.pod for more.
*
* Code that uses these macros is responsible for the following:
- * 1. #define MY_CXT_KEY to a unique string, e.g. "DynaLoader_guts"
+ * 1. #define MY_CXT_KEY to a unique string, e.g.
+ * "DynaLoader::_guts" XS_VERSION
* 2. Declare a typedef named my_cxt_t that is a structure that contains
* all the data that needs to be interpreter-local.
* 3. Use the START_MY_CXT macro after the declaration of my_cxt_t.
projects / p5sagit/p5-mst-13.2.git / blobdiff