#include <sys/fcntl.h>
#endif
+#ifdef VOIDUSED
+# undef VOIDUSED
+#endif
#define VOIDUSED 1
+
#ifdef PERL_MICRO
# include "uconfig.h"
#else
# include "config.h"
#endif
-#if defined(USE_ITHREADS) && defined(USE_5005THREADS)
-# include "error: USE_ITHREADS and USE_5005THREADS are incompatible"
-#endif
-
-/* XXX This next guard can disappear if the sources are revised
- to use USE_5005THREADS throughout. -- A.D 1/6/2000
-*/
-#if defined(USE_ITHREADS) && defined(USE_5005THREADS)
-# include "error: USE_ITHREADS and USE_5005THREADS are incompatible"
-#endif
-
/* See L<perlguts/"The Perl API"> for detailed notes on
* PERL_IMPLICIT_CONTEXT and PERL_IMPLICIT_SYS */
# endif
#endif
-#ifdef USE_5005THREADS
+#if defined(MULTIPLICITY)
# ifndef PERL_IMPLICIT_CONTEXT
# define PERL_IMPLICIT_CONTEXT
# endif
#endif
-#if defined(MULTIPLICITY)
-# ifndef PERL_IMPLICIT_CONTEXT
-# define PERL_IMPLICIT_CONTEXT
-# endif
+/* undef WIN32 when building on Cygwin (for libwin32) - gph */
+#ifdef __CYGWIN__
+# undef WIN32
+# undef _WIN32
#endif
/* Use the reentrant APIs like localtime_r and getpwent_r */
/* <--- here ends the logic shared by perl.h and makedef.pl */
#ifdef PERL_IMPLICIT_CONTEXT
-# ifdef USE_5005THREADS
-struct perl_thread;
-# define pTHX register struct perl_thread *thr PERL_UNUSED_DECL
-# define aTHX thr
-# define dTHR dNOOP /* only backward compatibility */
-# define dTHXa(a) pTHX = (struct perl_thread*)a
-# else
-# ifndef MULTIPLICITY
-# define MULTIPLICITY
-# endif
-# define pTHX register PerlInterpreter *my_perl PERL_UNUSED_DECL
-# define aTHX my_perl
-# define dTHXa(a) pTHX = (PerlInterpreter*)a
+# ifndef MULTIPLICITY
+# define MULTIPLICITY
# endif
+# define pTHX register PerlInterpreter *my_perl PERL_UNUSED_DECL
+# define aTHX my_perl
+# define dTHXa(a) pTHX = (PerlInterpreter*)a
# define dTHX pTHX = PERL_GET_THX
# define pTHX_ pTHX,
# define aTHX_ aTHX,
* Trying to select a version that gives no warnings...
*/
#if !(defined(STMT_START) && defined(STMT_END))
-# if defined(__GNUC__) && !defined(__STRICT_ANSI__) && !defined(__cplusplus)
+# if defined(__GNUC__) && !defined(__STRICT_ANSI__) && !defined(PERL_GCC_PEDANTIC) && !defined(__cplusplus)
# define STMT_START (void)( /* gcc supports ``({ STATEMENTS; })'' */
# define STMT_END )
# else
/* Now which other defined()s do we need here ??? */
-# if (VOIDFLAGS) && (defined(sun) || defined(__sun__))
+# if (VOIDFLAGS) && (defined(sun) || defined(__sun__)) && !defined(__GNUC__)
# define STMT_START if (1)
# define STMT_END else (void)0
# else
/* HP-UX 10.X CMA (Common Multithreaded Architecure) insists that
pthread.h must be included before all other header files.
*/
-#if (defined(USE_5005THREADS) || defined(USE_ITHREADS)) \
- && defined(PTHREAD_H_FIRST) && defined(I_PTHREAD)
+#if defined(USE_ITHREADS) && defined(PTHREAD_H_FIRST) && defined(I_PTHREAD)
# include <pthread.h>
#endif
# define MYSWAP
#endif
-/* Cannot include embed.h here on Win32 as win32.h has not
+/* Cannot include embed.h here on Win32 as win32.h has not
yet been included and defines some config variables e.g. HAVE_INTERP_INTERN
*/
#if !defined(PERL_FOR_X2P) && !(defined(WIN32)||defined(VMS))
# else
# define EMBEDMYMALLOC /* for compatibility */
# endif
+START_EXTERN_C
Malloc_t Perl_malloc (MEM_SIZE nbytes);
Malloc_t Perl_calloc (MEM_SIZE elements, MEM_SIZE size);
Malloc_t Perl_realloc (Malloc_t where, MEM_SIZE nbytes);
/* 'mfree' rather than 'free', since there is already a 'perl_free'
* that causes clashes with case-insensitive linkers */
Free_t Perl_mfree (Malloc_t where);
+END_EXTERN_C
typedef struct perl_mstats perl_mstats_t;
# define INCLUDE_PROTOTYPES /* for <socks.h> */
# define PERL_SOCKS_NEED_PROTOTYPES
# endif
-# ifdef USE_5005THREADS
-# define PERL_USE_THREADS /* store our value */
-# undef USE_5005THREADS
-# endif
# include <socks.h>
-# ifdef USE_5005THREADS
-# undef USE_5005THREADS /* socks.h does this on its own */
-# endif
-# ifdef PERL_USE_THREADS
-# define USE_5005THREADS /* restore our value */
-# undef PERL_USE_THREADS
-# endif
# ifdef PERL_SOCKS_NEED_PROTOTYPES /* keep cpp space clean */
# undef INCLUDE_PROTOTYPES
# undef PERL_SOCKS_NEED_PROTOTYPES
set_errno(errcode); \
set_vaxc_errno(vmserrcode); \
} STMT_END
+# define LIB_INVARG LIB$_INVARG
+# define RMS_DIR RMS$_DIR
+# define RMS_FAC RMS$_FAC
+# define RMS_FEX RMS$_FEX
+# define RMS_FNF RMS$_FNF
+# define RMS_IFI RMS$_IFI
+# define RMS_ISI RMS$_ISI
+# define RMS_PRV RMS$_PRV
+# define SS_ACCVIO SS$_ACCVIO
+# define SS_DEVOFFLINE SS$_DEVOFFLINE
+# define SS_IVCHAN SS$_IVCHAN
+# define SS_NORMAL SS$_NORMAL
#else
# define SETERRNO(errcode,vmserrcode) (errno = (errcode))
-#endif
-
-#ifdef USE_5005THREADS
-# define ERRSV (thr->errsv)
-# define DEFSV THREADSV(0)
-# define SAVE_DEFSV save_threadsv(0)
-#else
-# define ERRSV GvSV(PL_errgv)
-# define DEFSV GvSV(PL_defgv)
-# define SAVE_DEFSV SAVESPTR(GvSV(PL_defgv))
-#endif /* USE_5005THREADS */
+# define LIB_INVARG 0
+# define RMS_DIR 0
+# define RMS_FAC 0
+# define RMS_FEX 0
+# define RMS_FNF 0
+# define RMS_IFI 0
+# define RMS_ISI 0
+# define RMS_PRV 0
+# define SS_ACCVIO 0
+# define SS_DEVOFFLINE 0
+# define SS_IVCHAN 0
+# define SS_NORMAL 0
+#endif
+
+#define ERRSV GvSV(PL_errgv)
+#define DEFSV GvSV(PL_defgv)
+#define SAVE_DEFSV SAVESPTR(GvSV(PL_defgv))
#define ERRHV GvHV(PL_errgv) /* XXX unused, here for compatibility */
# define DBL_DIG OVR_DBL_DIG
#else
/* The following is all to get DBL_DIG, in order to pick a nice
- default value for printing floating point numbers in Gconvert.
- (see config.h)
+ default value for printing floating point numbers in Gconvert
+ (see config.h). (It also has other uses, such as figuring out if
+ a given precision of printing can be done with a double instead of
+ a long double - Allen).
*/
#ifdef I_LIMITS
#include <limits.h>
# endif
#endif
+/*
+ * This is for making sure we have a good DBL_MAX value, if possible,
+ * either for usage as NV_MAX or for usage in figuring out if we can
+ * fit a given long double into a double, if bug-fixing makes it
+ * necessary to do so. - Allen <allens@cpan.org>
+ */
+
+#ifdef I_LIMITS
+# include <limits.h>
+#endif
+
+#ifdef I_VALUES
+# if !(defined(DBL_MIN) && defined(DBL_MAX) && defined(I_LIMITS))
+# include <values.h>
+# if defined(MAXDOUBLE) && !defined(DBL_MAX)
+# define DBL_MAX MAXDOUBLE
+# endif
+# if defined(MINDOUBLE) && !defined(DBL_MIN)
+# define DBL_MIN MINDOUBLE
+# endif
+# endif
+#endif /* defined(I_VALUES) */
+
typedef NVTYPE NV;
#ifdef I_IEEEFP
# endif
# ifdef LDBL_MAX
# define NV_MAX LDBL_MAX
-# define NV_MIN LDBL_MIN
+/* Having LDBL_MAX doesn't necessarily mean that we have LDBL_MIN... -Allen */
# else
# ifdef HUGE_VALL
# define NV_MAX HUGE_VALL
/* e.g. libsunmath doesn't have modfl and frexpl as of mid-March 2000 */
# ifdef HAS_MODFL
# define Perl_modf(x,y) modfl(x,y)
+/* eg glibc 2.2 series seems to provide modfl on ppc and arm, but has no
+ prototype in <math.h> */
+# ifndef HAS_MODFL_PROTO
+long double modfl(long double, long double *);
+# endif
# else
# define Perl_modf(x,y) ((long double)modf((double)(x),(double*)(y)))
# endif
# ifdef DBL_EPSILON
# define NV_EPSILON DBL_EPSILON
# endif
-# ifdef DBL_MAX
+# ifdef DBL_MAX /* XXX Does DBL_MAX imply having DBL_MIN? */
# define NV_MAX DBL_MAX
# define NV_MIN DBL_MIN
# else
/* rumor has it that Win32 has _fpclass() */
+/* SGI has fpclassl... but not with the same result values,
+ * and it's via a typedef (not via #define), so will need to redo Configure
+ * to use. Not worth the trouble, IMO, at least until the below is used
+ * more places. Also has fp_class_l, BTW, via fp_class.h. Feel free to check
+ * with me for the SGI manpages, SGI testing, etcetera, if you want to
+ * try getting this to work with IRIX. - Allen <allens@cpan.org> */
+
#if !defined(Perl_fp_class) && (defined(HAS_FPCLASS)||defined(HAS_FPCLASSL))
# ifdef I_IEEFP
# include <ieeefp.h>
# endif
#endif
-#define Perl_atof(s) Perl_my_atof(s)
-#define Perl_atof2(s, np) Perl_my_atof2(s, np)
+/* The default is to use Perl's own atof() implementation (in numeric.c).
+ * Usually that is the one to use but for some platforms (e.g. UNICOS)
+ * it is however best to use the native implementation of atof.
+ * You can experiment with using your native one by -DUSE_PERL_ATOF=0.
+ * Some good tests to try out with either setting are t/base/num.t,
+ * t/op/numconvert.t, and t/op/pack.t. Note that if using long doubles
+ * you may need to be using a different function than atof! */
+
+#ifndef USE_PERL_ATOF
+# ifndef _UNICOS
+# define USE_PERL_ATOF
+# endif
+#else
+# if USE_PERL_ATOF == 0
+# undef USE_PERL_ATOF
+# endif
+#endif
+
+#ifdef USE_PERL_ATOF
+# define Perl_atof(s) Perl_my_atof(s)
+# define Perl_atof2(s, n) Perl_my_atof2(aTHX_ (s), &(n))
+#else
+# define Perl_atof(s) (NV)atof(s)
+# define Perl_atof2(s, n) ((n) = atof(s))
+#endif
/* Previously these definitions used hardcoded figures.
* It is hoped these formula are more portable, although
#ifdef I_LIMITS /* Needed for cast_xxx() functions below. */
# include <limits.h>
-#else
-#ifdef I_VALUES
-# include <values.h>
-#endif
#endif
+/* Included values.h above if necessary; still including limits.h down here,
+ * despite doing above, because math.h might have overriden... XXX - Allen */
/*
* Try to figure out max and min values for the integral types. THE CORRECT
# ifdef PATH_MAX
# ifdef _POSIX_PATH_MAX
# if PATH_MAX > _POSIX_PATH_MAX
-/* MAXPATHLEN is supposed to include the final null character,
- * as opposed to PATH_MAX and _POSIX_PATH_MAX. */
-# define MAXPATHLEN (PATH_MAX+1)
+/* POSIX 1990 (and pre) was ambiguous about whether PATH_MAX
+ * included the null byte or not. Later amendments of POSIX,
+ * XPG4, the Austin Group, and the Single UNIX Specification
+ * all explicitly include the null byte in the PATH_MAX.
+ * Ditto for _POSIX_PATH_MAX. */
+# define MAXPATHLEN PATH_MAX
# else
-# define MAXPATHLEN (_POSIX_PATH_MAX+1)
+# define MAXPATHLEN _POSIX_PATH_MAX
# endif
# else
# define MAXPATHLEN (PATH_MAX+1)
# endif
# else
# ifdef _POSIX_PATH_MAX
-# define MAXPATHLEN (_POSIX_PATH_MAX+1)
+# define MAXPATHLEN _POSIX_PATH_MAX
# else
# define MAXPATHLEN 1024 /* Err on the large side. */
# endif
# endif
#endif
-/*
- * USE_5005THREADS needs to be after unixish.h as <pthread.h> includes
+/* USE_5005THREADS needs to be after unixish.h as <pthread.h> includes
* <sys/signal.h> which defines NSIG - which will stop inclusion of <signal.h>
* this results in many functions being undeclared which bothers C++
* May make sense to have threads after "*ish.h" anyway
*/
-#if defined(USE_5005THREADS) || defined(USE_ITHREADS)
-# if defined(USE_5005THREADS)
- /* pending resolution of licensing issues, we avoid the erstwhile
- * atomic.h everywhere */
-# define EMULATE_ATOMIC_REFCOUNTS
-# endif
+#if defined(USE_ITHREADS)
# ifdef NETWARE
# include <nw5thread.h>
# else
# endif /* WIN32 */
# endif /* FAKE_THREADS */
#endif /* NETWARE */
-#endif /* USE_5005THREADS || USE_ITHREADS */
+#endif /* USE_ITHREADS */
#if defined(WIN32)
# include "win32.h"
#endif
#if defined(PERL_IMPLICIT_CONTEXT) && !defined(PERL_GET_THX)
-# ifdef USE_5005THREADS
-# define PERL_GET_THX ((struct perl_thread *)PERL_GET_CONTEXT)
-# else
# ifdef MULTIPLICITY
# define PERL_GET_THX ((PerlInterpreter *)PERL_GET_CONTEXT)
# endif
-# endif
# define PERL_SET_THX(t) PERL_SET_CONTEXT(t)
#endif
};
#endif
-#ifdef USE_5005THREADS
-#define ARGSproto struct perl_thread *thr
-#else
-#define ARGSproto
-#endif /* USE_5005THREADS */
-
typedef I32 (*filter_t) (pTHX_ int, SV *, int);
#define FILTER_READ(idx, sv, len) filter_read(idx, sv, len)
#include "util.h"
#include "form.h"
#include "gv.h"
+#include "pad.h"
#include "cv.h"
#include "opnames.h"
#include "op.h"
#ifndef Perl_error_log
# define Perl_error_log (PL_stderrgv \
+ && isGV(PL_stderrgv) \
&& GvIOp(PL_stderrgv) \
&& IoOFP(GvIOp(PL_stderrgv)) \
? IoOFP(GvIOp(PL_stderrgv)) \
#define DEBUG_r_FLAG 0x00000200 /* 512 */
#define DEBUG_x_FLAG 0x00000400 /* 1024 */
#define DEBUG_u_FLAG 0x00000800 /* 2048 */
-#define DEBUG_L_FLAG 0x00001000 /* 4096 */
#define DEBUG_H_FLAG 0x00002000 /* 8192 */
#define DEBUG_X_FLAG 0x00004000 /* 16384 */
#define DEBUG_D_FLAG 0x00008000 /* 32768 */
#define DEBUG_T_FLAG 0x00020000 /* 131072 */
#define DEBUG_R_FLAG 0x00040000 /* 262144 */
#define DEBUG_J_FLAG 0x00080000 /* 524288 */
-#define DEBUG_MASK 0x000FFFFF /* mask of all the standard flags */
+#define DEBUG_v_FLAG 0x00100000 /*1048576 */
+#define DEBUG_C_FLAG 0x00200000 /*2097152 */
+#define DEBUG_MASK 0x003FEFFF /* mask of all the standard flags */
#define DEBUG_DB_RECURSE_FLAG 0x40000000
#define DEBUG_TOP_FLAG 0x80000000 /* XXX what's this for ??? Signal
# define DEBUG_r_TEST_ (PL_debug & DEBUG_r_FLAG)
# define DEBUG_x_TEST_ (PL_debug & DEBUG_x_FLAG)
# define DEBUG_u_TEST_ (PL_debug & DEBUG_u_FLAG)
-# define DEBUG_L_TEST_ (PL_debug & DEBUG_L_FLAG)
# define DEBUG_H_TEST_ (PL_debug & DEBUG_H_FLAG)
# define DEBUG_X_TEST_ (PL_debug & DEBUG_X_FLAG)
# define DEBUG_D_TEST_ (PL_debug & DEBUG_D_FLAG)
# define DEBUG_T_TEST_ (PL_debug & DEBUG_T_FLAG)
# define DEBUG_R_TEST_ (PL_debug & DEBUG_R_FLAG)
# define DEBUG_J_TEST_ (PL_debug & DEBUG_J_FLAG)
+# define DEBUG_v_TEST_ (PL_debug & DEBUG_v_FLAG)
+# define DEBUG_C_TEST_ (PL_debug & DEBUG_C_FLAG)
+# define DEBUG_Xv_TEST_ (DEBUG_X_TEST_ && DEBUG_v_TEST_)
#ifdef DEBUGGING
# define DEBUG_r_TEST DEBUG_r_TEST_
# define DEBUG_x_TEST DEBUG_x_TEST_
# define DEBUG_u_TEST DEBUG_u_TEST_
-# define DEBUG_L_TEST DEBUG_L_TEST_
# define DEBUG_H_TEST DEBUG_H_TEST_
# define DEBUG_X_TEST DEBUG_X_TEST_
+# define DEBUG_Xv_TEST DEBUG_Xv_TEST_
# define DEBUG_D_TEST DEBUG_D_TEST_
# define DEBUG_S_TEST DEBUG_S_TEST_
# define DEBUG_T_TEST DEBUG_T_TEST_
# define DEBUG_R_TEST DEBUG_R_TEST_
# define DEBUG_J_TEST DEBUG_J_TEST_
+# define DEBUG_v_TEST DEBUG_v_TEST_
+# define DEBUG_C_TEST DEBUG_C_TEST_
# define DEB(a) a
# define DEBUG(a) if (PL_debug) a
# define DEBUG_r(a) DEBUG__(DEBUG_r_TEST, a)
# define DEBUG_x(a) DEBUG__(DEBUG_x_TEST, a)
# define DEBUG_u(a) DEBUG__(DEBUG_u_TEST, a)
-# define DEBUG_L(a) DEBUG__(DEBUG_L_TEST, a)
# define DEBUG_H(a) DEBUG__(DEBUG_H_TEST, a)
# define DEBUG_X(a) DEBUG__(DEBUG_X_TEST, a)
+# define DEBUG_Xv(a) DEBUG__(DEBUG_Xv_TEST, a)
# define DEBUG_D(a) DEBUG__(DEBUG_D_TEST, a)
-# ifdef USE_5005THREADS
-# define DEBUG_S(a) DEBUG__(DEBUG_S_TEST, a)
-# else
-# define DEBUG_S(a)
-# endif
+# define DEBUG_S(a)
# define DEBUG_T(a) DEBUG__(DEBUG_T_TEST, a)
# define DEBUG_R(a) DEBUG__(DEBUG_R_TEST, a)
+# define DEBUG_v(a) DEBUG__(DEBUG_v_TEST, a)
+# define DEBUG_C(a) DEBUG__(DEBUG_C_TEST, a)
#else /* DEBUGGING */
# define DEBUG_r_TEST (0)
# define DEBUG_x_TEST (0)
# define DEBUG_u_TEST (0)
-# define DEBUG_L_TEST (0)
# define DEBUG_H_TEST (0)
# define DEBUG_X_TEST (0)
+# define DEBUG_Xv_TEST (0)
# define DEBUG_D_TEST (0)
# define DEBUG_S_TEST (0)
# define DEBUG_T_TEST (0)
# define DEBUG_R_TEST (0)
# define DEBUG_J_TEST (0)
+# define DEBUG_v_TEST (0)
+# define DEBUG_C_TEST (0)
# define DEB(a)
# define DEBUG(a)
# define DEBUG_r(a)
# define DEBUG_x(a)
# define DEBUG_u(a)
-# define DEBUG_L(a)
# define DEBUG_H(a)
# define DEBUG_X(a)
+# define DEBUG_Xv(a)
# define DEBUG_D(a)
# define DEBUG_S(a)
# define DEBUG_T(a)
# define DEBUG_R(a)
+# define DEBUG_v(a)
+# define DEBUG_C(a)
#endif /* DEBUGGING */
#define PERL_MAGIC_uvar 'U' /* Available for use by extensions */
#define PERL_MAGIC_uvar_elem 'u' /* Reserved for use by extensions */
#define PERL_MAGIC_vec 'v' /* vec() lvalue */
+#define PERL_MAGIC_vstring 'V' /* SV was vstring literal */
#define PERL_MAGIC_substr 'x' /* substr() lvalue */
#define PERL_MAGIC_defelem 'y' /* Shadow "foreach" iterator variable /
smart parameter vivification */
# ifndef register
# define register
# endif
-# define PAD_SV(po) pad_sv(po)
# define RUNOPS_DEFAULT Perl_runops_debug
#else
-# define PAD_SV(po) PL_curpad[po]
# define RUNOPS_DEFAULT Perl_runops_standard
#endif
XBLOCK,
XATTRBLOCK,
XATTRTERM,
- XTERMBLOCK
+ XTERMBLOCK,
+ XTERMORDORDOR /* evil hack */
} expectation;
enum { /* pass one of these to get_vtbl */
want_vtbl_collxfrm,
want_vtbl_amagic,
want_vtbl_amagicelem,
-#ifdef USE_5005THREADS
- want_vtbl_mutex,
-#endif
want_vtbl_regdata,
want_vtbl_regdatum,
want_vtbl_backref
*/
struct interpreter {
-# ifndef USE_5005THREADS
-# include "thrdvar.h"
-# endif
+# include "thrdvar.h"
# include "intrpvar.h"
/*
* The following is a buffer where new variables must
};
#endif /* MULTIPLICITY */
-#ifdef USE_5005THREADS
-/* If we have threads define a struct with all the variables
- * that have to be per-thread
- */
-
-
-struct perl_thread {
-#include "thrdvar.h"
-};
-
-typedef struct perl_thread *Thread;
-
-#else
typedef void *Thread;
-#endif
/* Done with PERLVAR macros for now ... */
#undef PERLVAR
#if !defined(MULTIPLICITY)
START_EXTERN_C
# include "intrpvar.h"
-# ifndef USE_5005THREADS
-# include "thrdvar.h"
-# endif
+# include "thrdvar.h"
END_EXTERN_C
#endif
EXT MGVTBL PL_vtbl_uvar = {MEMBER_TO_FPTR(Perl_magic_getuvar),
MEMBER_TO_FPTR(Perl_magic_setuvar),
0, 0, 0};
-#ifdef USE_5005THREADS
-EXT MGVTBL PL_vtbl_mutex = {0, 0, 0, 0,
- MEMBER_TO_FPTR(Perl_magic_mutexfree)};
-#endif /* USE_5005THREADS */
EXT MGVTBL PL_vtbl_defelem = {MEMBER_TO_FPTR(Perl_magic_getdefelem),
MEMBER_TO_FPTR(Perl_magic_setdefelem),
0, 0, 0};
EXT MGVTBL PL_vtbl_uvar;
EXT MGVTBL PL_vtbl_ovrld;
-#ifdef USE_5005THREADS
-EXT MGVTBL PL_vtbl_mutex;
-#endif /* USE_5005THREADS */
-
EXT MGVTBL PL_vtbl_defelem;
EXT MGVTBL PL_vtbl_regexp;
EXT MGVTBL PL_vtbl_regdata;
# define Atoul(s) Strtoul(s, (char **)NULL, 10)
#endif
-#if !defined(PERLIO_IS_STDIO) && defined(HASATTRIBUTE)
+#if !defined(PERLIO_IS_STDIO)
/*
- * Now we have __attribute__ out of the way
* Remap printf
*/
#undef printf
-#ifdef __GNUC__
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) && !defined(PERL_GCC_PEDANTIC)
#define printf(fmt,args...) PerlIO_stdoutf(fmt,##args)
#else
#define printf PerlIO_stdoutf
* Boilerplate macros for initializing and accessing interpreter-local
* data from C. All statics in extensions should be reworked to use
* this, if you want to make the extension thread-safe. See ext/re/re.xs
- * for an example of the use of these macros.
+ * for an example of the use of these macros, and perlxs.pod for more.
*
* Code that uses these macros is responsible for the following:
- * 1. #define MY_CXT_KEY to a unique string, e.g. "DynaLoader_guts"
+ * 1. #define MY_CXT_KEY to a unique string, e.g.
+ * "DynaLoader::_guts" XS_VERSION
* 2. Declare a typedef named my_cxt_t that is a structure that contains
* all the data that needs to be interpreter-local.
* 3. Use the START_MY_CXT macro after the declaration of my_cxt_t.
#define UNICODE_PARA_SEPA_1 0x80
#define UNICODE_PARA_SEPA_2 0xA9
+#ifndef PIPESOCK_MODE
+# define PIPESOCK_MODE
+#endif
+
/* and finally... */
#define PERL_PATCHLEVEL_H_IMPLICIT
#include "patchlevel.h"
NVff
NVgf
- HAS_USLEEP
HAS_UALARM
+ HAS_USLEEP
+ HAS_NANOSLEEP
HAS_SETITIMER
HAS_GETITIMER
projects / p5sagit/p5-mst-13.2.git / blobdiff