AOUT_CCCMD_DLL = \$(CC) -DDOSISH -DOS2=2 -DEMBED -I. -DPACK_MALLOC -DDEBUGGING_MSTATS -DTWO_POT_OPTIMIZE -DPERL_EMERGENCY_SBRK
AOUT_CLDFLAGS_DLL = -Zexe -Zmt -Zcrtdll -Zstack 32000
-LD_OPT = $optimize
+# No -DPERL_CORE
+SO_CCCMD = \$(CC) $ccflags \$(OPTIMIZE)
+
+LD_OPT = \$(OPTIMIZE)
+PERL_DLL_LD_OPT = -Zmap -Zlinker /map
PERL_DLL_BASE = perl$dll_post
PERL_DLL = \$(PERL_DLL_BASE)\$(DLSUFFIX)
!GROK!THIS!
$spitshell >>Makefile <<'!NO!SUBS!'
+PREPLIBRARY_LIBPERL = $(LIBPERL)
$(LIBPERL): perl.imp $(PERL_DLL) perl5.def libperl_override.lib
emximp -o $(LIBPERL) perl.imp
+ cp $(LIBPERL) perl.lib
-libperl_override.imp: os2/os2add.sym
+libperl_override.imp: os2/os2add.sym miniperl
./miniperl -wnle 'print "$$_\t$(PERL_DLL_BASE)\t$$_\t?"' os2/os2add.sym > tmp.imp
echo 'strdup $(PERL_DLL_BASE) Perl_strdup ?' >> tmp.imp
echo 'putenv $(PERL_DLL_BASE) Perl_putenv ?' >> tmp.imp
echo 'emx_malloc emxlibcm 402 ?' >> $@
echo 'emx_realloc emxlibcm 403 ?' >> $@
+.PHONY: perl_dll installcmd aout_clean aout_install aout_install.perl \
+ perlrexx test_prep_perl_ test_prep_perl_sys test_prep_perl_stat \
+ test_prep_perl_stat_aout test_prep_various \
+ stat_aout_harness aout_harness stat_harness sys_harness all_harness \
+ stat_aout_test aout_test stat_test sys_test all_test
+
perl_dll: $(PERL_DLL)
perl_dll_t: t/$(PERL_DLL)
$(LNS) $(PERL_DLL) t/$(PERL_DLL)
$(PERL_DLL): $(obj) perl5.def perl$(OBJ_EXT)
- $(LD) $(LD_OPT) $(LDDLFLAGS) -o $@ perl$(OBJ_EXT) $(obj) $(libs) perl5.def || ( rm $(PERL_DLL) && sh -c false )
+ $(LD) $(LD_OPT) $(LDDLFLAGS) $(PERL_DLL_LD_OPT) -o $@ perl$(OBJ_EXT) $(obj) $(libs) perl5.def || ( rm $(PERL_DLL) && sh -c false )
perl5.olddef: perl.linkexp
echo "LIBRARY '$(PERL_DLL_BASE)' INITINSTANCE TERMINSTANCE" > $@
# We link miniperl statically, since .DLL depends on $(DYNALOADER)
-miniperl.map miniperl: $(obj) perl$(OBJ_EXT) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT)
+miniperl.map: miniperl
+
+miniperl.exe: miniperl
+
+miniperl: $(obj) perl$(OBJ_EXT) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT)
$(CC) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) perl$(OBJ_EXT) `echo $(obj)|sed -e 's/\bop\./opmini./g'` $(libs) -Zmap -Zlinker /map/PM:VIO
@./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
dlfcn.h: os2/dlfcn.h
cp -f $< $@
-# This one is compiled OMF, so cannot fork():
+# Non-Forking dynamically loaded perl
-perl___: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
- $(SHRPENV) $(CC) $(CLDFLAGS) $(CCDLFLAGS) -o perl___ perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LIBPERL) `cat ext.libs` $(libs)
+perl___$(EXE_EXT) perl___: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ $(SHRPENV) $(CC) $(CLDFLAGS) $(CCDLFLAGS) -o perl___ perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LIBPERL) `cat ext.libs` $(libs) -Zlinker /map/PM:VIO
# This one is compiled -Zsys, so cannot do many things:
+# Remove -Zcrtdll
+STAT_CLDFLAGS = -Zexe -Zomf -Zmt -Zstack 32000
+
+# Non-forking dynamically loaded perl with a wrong CRT library:
+
+perl_stat: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ $(SHRPENV) $(CC) $(STAT_CLDFLAGS) $(CCDLFLAGS) -o $@ perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LIBPERL) `cat ext.libs` $(libs) -Zlinker /map/PM:VIO
+
# Remove -Zcrtdll, add -Zsys
-SYS_CLDFLAGS = -Zexe -Zomf -Zmt -Zsys -Zstack 32000
+SYS_CLDFLAGS = $(STAT_CLDFLAGS) -Zsys
+
+# Non-Forking dynamically loaded perl without EMX - so with wrong CRT library
perl_sys: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
- $(SHRPENV) $(CC) $(SYS_CLDFLAGS) $(CCDLFLAGS) -o perl_sys perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LIBPERL) `cat ext.libs` $(libs)
+ $(SHRPENV) $(CC) $(SYS_CLDFLAGS) $(CCDLFLAGS) -o $@ perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LIBPERL) `cat ext.libs` $(libs) -Zlinker /map/PM:VIO
installcmd :
@perl -e 'die qq{Give the option INSTALLCMDDIR=... to make!} if $$ARGV[0] eq ""' $(INSTALLCMDDIR)
$(AOUT_LIBPERL) : $(aout_obj) perl$(AOUT_OBJ_EXT)
rm -f $@
$(AOUT_AR) rcu $@ perl$(AOUT_OBJ_EXT) $(aout_obj)
+ cp $@ perl.a
.c$(AOUT_OBJ_EXT):
$(AOUT_CCCMD) $(PLDLFLAGS) -c $*.c
sh writemain $(DYNALOADER) $(aout_static_lib) > tmp
sh mv-if-diff tmp aout_perlmain.c
-miniperl_: $& miniperlmain$(AOUT_OBJ_EXT) $(AOUT_LIBPERL) opmini$(AOUT_OBJ_EXT)
+_preplibrary = miniperl lib/Config.pm lib/lib.pm lib/re.pm
+
+miniperl_: $& miniperlmain$(AOUT_OBJ_EXT) $(AOUT_LIBPERL) opmini$(AOUT_OBJ_EXT) $(_preplibrary)
$(CC) $(AOUT_CLDFLAGS) $(CCDLFLAGS) -o miniperl_ miniperlmain$(AOUT_OBJ_EXT) opmini$(AOUT_OBJ_EXT) $(AOUT_LIBPERL) $(libs)
-perl_: $& aout_perlmain$(AOUT_OBJ_EXT) $(AOUT_LIBPERL) $(AOUT_DYNALOADER) $(aout_static_ext) ext.libs
+# Forking statically loaded perl
+
+# Need a miniperl_ dependency, since $(AOUT_DYNALOADER) is build via implicit
+# rules, thus would not rebuild miniperl_ via an explicit rule
+
+perl_$(EXE_EXT) perl_: $& miniperl_ aout_perlmain$(AOUT_OBJ_EXT) $(AOUT_LIBPERL) $(AOUT_DYNALOADER) $(aout_static_ext) ext.libs
$(CC) $(AOUT_CLDFLAGS) $(CCDLFLAGS) -o perl_ aout_perlmain$(AOUT_OBJ_EXT) $(AOUT_DYNALOADER) $(aout_static_ext) $(AOUT_LIBPERL) `cat ext.libs` $(libs)
-perl : perl__ perl___
+# Remove -Zcrtdll
+STAT_AOUT_CLDFLAGS = -Zexe -Zmt -Zstack 32000
+
+# Forking dynamically loaded perl with a wrong CRT library:
+
+perl_stat_aout$(EXE_EXT) perl_stat_aout: $& perlmain$(AOUT_OBJ_EXT) $(AOUT_DYNALOADER_OBJ) $(aout_static_ext_dll) $(AOUT_LIBPERL_DLL) ext.libs
+ $(SHRPENV) $(CC) $(STAT_AOUT_CLDFLAGS) $(CCDLFLAGS) -o $@ perlmain$(AOUT_OBJ_EXT) $(AOUT_DYNALOADER_OBJ) $(aout_static_ext_dll) $(AOUT_LIBPERL_DLL) `cat ext.libs` $(libs)
+
+PERLREXX_DLL = perlrexx.dll
-perl__: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+perl : perl__ perl___ $(PERLREXX_DLL)
+
+# Dynamically loaded PM-application perl:
+
+perl__$(EXE_EXT) perl__: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
$(CC) $(CLDFLAGS) $(CCDLFLAGS) -o perl__ perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LIBPERL) `cat ext.libs` $(libs) -Zlinker /PM:PM
# Forking dynamically loaded perl:
-perl: $& perlmain$(AOUT_OBJ_EXT) $(AOUT_DYNALOADER_OBJ) $(aout_static_ext_dll) $(AOUT_LIBPERL_DLL) ext.libs
+perl$(EXE_EXT) perl: $& perlmain$(AOUT_OBJ_EXT) $(AOUT_DYNALOADER_OBJ) $(aout_static_ext_dll) $(AOUT_LIBPERL_DLL) ext.libs
$(CC) $(AOUT_CLDFLAGS_DLL) $(CCDLFLAGS) -o perl perlmain$(AOUT_OBJ_EXT) $(AOUT_DYNALOADER_OBJ) $(aout_static_ext_dll) $(AOUT_LIBPERL_DLL) `cat ext.libs` $(libs)
clean: aout_clean
aout_install.perl: perl_ installperl
./perl_ installperl
-aout_test: perl_
- - cd t && (rm -f perl_$(EXE_EXT); $(LNS) ../perl_$(EXE_EXT) perl$(EXE_EXT)) && ./perl TEST </dev/tty
+perlrexx: $(PERLREXX_DLL)
+ @sh -c true
+
+perlrexx.c: os2/perlrexx.c
+ @cp -f os2/$@ $@
+
+# Remove -Zexe, add -Zdll -Zso. No stack needed
+SO_CLDFLAGS = -Zdll -Zso -Zomf -Zmt -Zsys
+
+# A callable-from-REXX DLL
+
+$(PERLREXX_DLL): perlrexx$(OBJ_EXT) perlrexx.def
+ $(SHRPENV) $(CC) $(SO_CLDFLAGS) $(CCDLFLAGS) -o $@ perlrexx$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LIBPERL) `cat ext.libs` $(libs) perlrexx.def
+
+perlrexx.def: miniperl $(_preplibrary)
+ echo "LIBRARY 'perlrexx' INITINSTANCE TERMINSTANCE" > tmp.def
+ echo "DESCRIPTION '@#perl5-porters@perl.org:`miniperl -Ilib -MConfig -e 'print \$$]'`#@ REXX to Perl `miniperl -Ilib -MConfig -e 'print \$$Config{version}'` interface'" >> tmp.def
+ echo "EXPORTS" >> tmp.def
+ echo ' "PERL"' >> tmp.def
+ echo ' "PERLTERM"' >> tmp.def
+ echo ' "PERLINIT"' >> tmp.def
+ echo ' "PERLEXIT"' >> tmp.def
+ echo ' "PERLEVAL"' >> tmp.def
+ echo ' "PERLLASTERROR"' >> tmp.def
+ echo ' "PERLEVALSUBCOMMAND"' >> tmp.def
+ echo ' "PERLEXPORTALL"' >> tmp.def
+ echo ' "PERLDROPALL"' >> tmp.def
+ echo ' "PERLDROPALLEXIT"' >> tmp.def
+ sh mv-if-diff tmp.def $@
+
+
+perlrexx$(OBJ_EXT): perlrexx.c
+ $(SO_CCCMD) $(PLDLFLAGS) -c perlrexx.c
+
+# To test with harness, one needed to HARNESS_IGNORE_EXITCODE=2
+
+# Define to be empty to get a TTY test
+REDIR_TEST = 2>&1 | tee 00_$@
+
+test_prep_perl_: test_prep_pre miniperl_ ./perl_$(EXE_EXT)
+ PERL=./perl_ $(MAKE) _test_prep
-# To test with harness, set HARNESS_BAD_EXITCODE=2
+test_prep_various: test_prep_pre miniperl $(dynamic_ext) $(TEST_PERL_DLL)
-sys_test: perl_sys
- - cd t && (rm -f perl_$(EXE_EXT); $(LNS) ../perl_sys$(EXE_EXT) perl$(EXE_EXT)) && ./perl TEST </dev/tty
+test_prep_perl_sys: test_prep_various ./perl_sys$(EXE_EXT)
+ PERL=./perl_sys $(MAKE) _test_prep
-sys_harness: perl_sys
- - cd t && (rm -f perl_$(EXE_EXT); $(LNS) ../perl_sys$(EXE_EXT) perl$(EXE_EXT)) && env HARNESS_BAD_EXITCODE=2 ./perl harness </dev/tty
+test_prep_perl___: test_prep_various ./perl___$(EXE_EXT)
+ PERL=./perl___ $(MAKE) _test_prep
+
+test_prep_perl_stat: test_prep_various ./perl_stat$(EXE_EXT)
+ PERL=./perl_stat $(MAKE) _test_prep
+
+test_prep_perl_stat_aout: test_prep_various ./perl_stat_aout$(EXE_EXT)
+ PERL=./perl_stat_aout $(MAKE) _test_prep
+
+aout_test: test_prep_perl_
+ PERL=./perl_ $(MAKE) _test
+
+aout_harness: test_prep_perl_
+ -PERL=./perl_ $(MAKE) TESTFILE=harness _test $(REDIR_TEST)
+
+sys_test: test_prep_perl_sys
+ PERL=./perl_sys $(MAKE) _test
+
+sys_harness: test_prep_perl_sys
+ -PERL=./perl_sys $(MAKE) TESTFILE=harness _test $(REDIR_TEST)
+
+stat_test: test_prep_perl_stat
+ PERL=./perl_stat $(MAKE) _test
+
+stat_harness: test_prep_perl_stat
+ -PERL=./perl_stat $(MAKE) TESTFILE=harness _test $(REDIR_TEST)
+
+stat_aout_test: test_prep_perl_stat_aout
+ PERL=./perl_stat_aout $(MAKE) _test
+
+stat_aout_harness: test_prep_perl_stat_aout
+ -PERL=./perl_stat_aout $(MAKE) TESTFILE=harness _test $(REDIR_TEST)
+
+perl___test: test_prep_perl___
+ PERL=./perl___ $(MAKE) _test
+
+perl___harness: test_prep_perl___
+ -PERL=./perl___ $(MAKE) TESTFILE=harness _test $(REDIR_TEST)
+
+all_test: test aout_test perl___test sys_test stat_test stat_aout_test
+
+all_harness: test_harness aout_harness perl___harness sys_harness stat_harness stat_aout_harness
!NO!SUBS!
-# Now we need to find directories in ./ext/ which are two level deep
+# Now we need to find directories in ./ext/ which are up to 3 level deep
+# Currently (2001/06) there is no directories 4 levels deep.
+# (Only directories so that there is no Makefile.PL some levels up matter.)
dirs=''
+ddirs=''
preci='ext/%/Makefile.aout '
for d in ext/*
do
- # echo "Checking '$d'..."
- f="`echo $d/*/Makefile.PL`"
- # SDBFile/sdbm, skip kid makefile
- if test ! -e "$d/Makefile.PL" -a ! "$f" = ""; then
- dirs="$dirs $d"
- preci="$preci $d/%/Makefile.aout"
+ # echo "...Checking '$d'..."
+ # skip the kid if the parent exists: cmp SDBFile/sdbm, done by MakeMaker
+ if test ! -e "$d/Makefile.PL"; then
+ # Need to treat subdirectories manually
+ # echo "...Checking subdirs of '$d'..."
+ d_treated=''
+ for dd in $d/*
+ do
+ if test ! -d $dd; then
+ continue
+ fi
+ if test -e "$dd/Makefile.PL"; then
+ if test "X$d_treated" = "X"; then
+ d_treated=1
+ # echo "...Found parentless 2-level deep Makefile.PL's in $d/*/:" $d/*/Makefile.PL
+ dirs="$dirs $d"
+ preci="$preci $d/%/Makefile.aout"
+ fi
+ else
+ # Need to treat subsubdirectories manually
+ dd_treated=''
+ for ddd in $dd/*
+ do
+ if test ! -d $ddd; then
+ continue
+ fi
+ if test -e "$ddd/Makefile.PL"; then
+ if test "X$dd_treated" = "X"; then
+ dd_treated=1
+ # echo "...Found parentless 3-level deep Makefile.PL's in $dd/*/:" $dd/*/Makefile.PL
+ ddirs="$ddirs $dd"
+ preci="$preci $dd/%/Makefile.aout"
+ fi
+ fi
+ done
+ fi
+ done
fi
done
$spitshell >>Makefile <<!GROK!THIS!
.PRECIOUS : $preci
+# Set this to FORCE to force a rebuilt of aout extensions
+
+AOUT_EXTENSIONS_FORCE =
+
!GROK!THIS!
+for d in $ddirs
+do
+ # Remove the leading component ext/
+ dd=`dirname $d`
+ pp=`basename $dd`
+ p=$pp/`basename $d`
+ $spitshell >>Makefile <<!GROK!THIS!
+lib/auto/$p/*/%.a : $d/%/Makefile.aout
+ @cd $d/\$(basename \$(notdir \$@)) ; make -f Makefile.aout config || echo "\$(MAKE) config failed, continuing anyway..."
+ cd $d/\$(basename \$(notdir \$@)) ; make -f Makefile.aout LINKTYPE=static CCCDLFLAGS=
+
+$d/%/Makefile.aout : miniperl_ \$(_preplibrary) \$(AOUT_EXTENSIONS_FORCE)
+ cd \$(dir \$@) ; ../../../../miniperl_ -I ../../../../lib Makefile.PL FIRST_MAKEFILE=Makefile.aout INSTALLDIRS=perl
+
+!GROK!THIS!
+
+done
+
for d in $dirs
do
p=`basename $d`
$spitshell >>Makefile <<!GROK!THIS!
-lib/auto/$p/*/%.a : ext/$p/%/Makefile.aout
- @cd ext/$p/\$(basename \$(notdir \$@)) ; make -f Makefile.aout config || echo "\$(MAKE) config failed, continuing anyway..."
- cd ext/$p/\$(basename \$(notdir \$@)) ; make -f Makefile.aout LINKTYPE=static CCCDLFLAGS=
+lib/auto/$p/*/%.a : $d/%/Makefile.aout
+ @cd $d/\$(basename \$(notdir \$@)) ; make -f Makefile.aout config || echo "\$(MAKE) config failed, continuing anyway..."
+ cd $d/\$(basename \$(notdir \$@)) ; make -f Makefile.aout LINKTYPE=static CCCDLFLAGS=
-$d/%/Makefile.aout : miniperl_
- cd \$(dir \$@) ; ../../../miniperl_ -I ../../../lib Makefile.PL MAKEFILE=Makefile.aout INSTALLDIRS=perl
+$d/%/Makefile.aout : miniperl_ \$(_preplibrary) \$(AOUT_EXTENSIONS_FORCE)
+ cd \$(dir \$@) ; ../../../miniperl_ -I ../../../lib Makefile.PL FIRST_MAKEFILE=Makefile.aout INSTALLDIRS=perl
!GROK!THIS!
done
+# We need to special-case OS2/DLL/DLL.a, since the recipe above will
+# try to find it in ext/OS2/DLL
+
$spitshell >>Makefile <<'!NO!SUBS!'
+lib/auto/OS2/DLL/DLL.a : lib/auto/OS2/REXX/REXX.a
+ @sh -c true
+
lib/auto/*/%.a : ext/%/Makefile.aout
@cd ext/$(basename $(notdir $@)) ; make -f Makefile.aout config || echo "\$(MAKE) config failed, continuing anyway..."
cd ext/$(basename $(notdir $@)) ; make -f Makefile.aout LINKTYPE=static CCCDLFLAGS=
-ext/%/Makefile.aout : miniperl_
- cd $(dir $@) ; ../../miniperl_ -I ../../lib Makefile.PL MAKEFILE=Makefile.aout INSTALLDIRS=perl
+ext/%/Makefile.aout : miniperl_ $(_preplibrary) $(AOUT_EXTENSIONS_FORCE)
+ cd $(dir $@) ; ../../miniperl_ -I ../../lib Makefile.PL FIRST_MAKEFILE=Makefile.aout INSTALLDIRS=perl
!NO!SUBS!