use strict;
use warnings;
use Config;
+use Cwd;
+
+# To clarify, this isn't the entire suite of modules considered "toolchain"
+# It's not even all modules needed to build ext/
+# It's just the source paths of the (minimum complete set of) modules in ext/
+# needed to build the nonxs modules
+# After which, all nonxs modules are in lib, which was always sufficient to
+# allow miniperl to build everything else.
+
+my @toolchain = qw(ext/constant/lib ext/ExtUtils-Command/lib
+ ext/ExtUtils-Install/lib ext/ExtUtils-MakeMaker/lib
+ ext/ExtUtils-Manifest/lib ext/Text-ParseWords/lib);
# This script acts as a simple interface for building extensions.
-# It primarily used by the perl Makefile:
+
+# It's actually a cut and shut of the Unix version ext/utils/makeext and the
+# Windows version win32/build_ext.pl hence the two invocation styles.
+
+# On Unix, it primarily used by the perl Makefile one extention at a time:
#
# d_dummy $(dynamic_ext): miniperl preplibrary FORCE
# @$(RUN) ./miniperl make_ext.pl --target=dynamic $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
#
+# On Windows or VMS,
+# If '--static' is specified, static extensions will be built.
+# If '--dynamic' is specified, dynamic extensions will be built.
+# If '--nonxs' is specified, nonxs extensions will be built.
+# If '--all' is specified, all extensions will be built.
+#
+# make_ext.pl "MAKE=make [-make_opts]" --dir=directory [--target=target] [--static|--dynamic|--all] +ext2 !ext1
+#
+# E.g.
+#
+# make_ext.pl "MAKE=nmake -nologo" --dir=..\ext
+#
+# make_ext.pl "MAKE=nmake -nologo" --dir=..\ext --target=clean
+#
+# make_ext.pl MAKE=dmake --dir=..\ext
+#
+# make_ext.pl MAKE=dmake --dir=..\ext --target=clean
+#
+# Will skip building extensions which are marked with an '!' char.
+# Mostly because they still not ported to specified platform.
+#
+# If any extensions are listed with a '+' char then only those
+# extensions will be built, but only if they arent countermanded
+# by an '!ext' and are appropriate to the type of building being done.
+
# It may be deleted in a later release of perl so try to
# avoid using it for other purposes.
my $is_VMS = $^O eq 'VMS';
my $is_Unix = !$is_Win32 && !$is_VMS;
+require FindExt if $is_Win32;
+
my (%excl, %incl, %opts, @extspec, @pass_through);
foreach (@ARGV) {
$opts{$1} = $2;
} elsif (/=/) {
push @pass_through, $_;
- } else {
+ } elsif (length) {
push @extspec, $_;
}
}
+my $static = $opts{static} || $opts{all};
+my $dynamic = $opts{dynamic} || $opts{all};
+my $nonxs = $opts{nonxs} || $opts{all};
+
+# The Perl Makefile.SH will expand all extensions to
+# lib/auto/X/X.a (or lib/auto/X/Y/Y.a if nested)
+# A user wishing to run make_ext might use
+# X (or X/Y or X::Y if nested)
+
+# canonise into X/Y form (pname)
+
+foreach (@extspec) {
+ if (s{^lib/auto/}{}) {
+ # Remove lib/auto prefix and /*.* suffix
+ s{/[^/]+\.[^/]+$}{};
+ } elsif (s{^ext/}{}) {
+ # Remove ext/ prefix and /pm_to_blib suffix
+ s{/pm_to_blib$}{};
+ # Targets are given as files on disk, but the extension spec is still
+ # written using /s for each ::
+ tr!-!/!;
+ } elsif (s{::}{\/}g) {
+ # Convert :: to /
+ } else {
+ s/\..*o//;
+ }
+}
+
my $makecmd = shift @pass_through; # Should be something like MAKE=make
unshift @pass_through, 'PERL_CORE=1';
+my $dir = $opts{dir} || 'ext';
my $target = $opts{target};
-my $extspec = $extspec[0];
+$target = 'all' unless defined $target;
# Previously, $make was taken from config.sh. However, the user might
# instead be running a possibly incompatible make. This might happen if
# makefile as MAKE=/whatever/make in $makecmd. We'll be cautious in
# case third party users of this script (are there any?) don't have the
# MAKE=$(MAKE) argument, which was added after 5.004_03.
-my $make;
-if (defined($makecmd) and $makecmd =~ /^MAKE=(.*)$/) {
- $make = $1;
-}
-else {
- print "ext/util/make_ext: WARNING: Please include MAKE=\$(MAKE)\n";
- print "\tin your call to make_ext. See ext/util/make_ext for details.\n";
- exit(1);
+unless(defined $makecmd and $makecmd =~ /^MAKE=(.*)$/) {
+ die "$0: WARNING: Please include MAKE=\$(MAKE) in \@ARGV\n";
}
-# fallback to config.sh's MAKE
-$make ||= $Config{make} || $ENV{MAKE};
+# This isn't going to cope with anything fancy, such as spaces inside command
+# names, but neither did what it replaced. Once there is a use case that needs
+# it, please supply patches. Until then, I'm sticking to KISS
+my @make = split ' ', $1 || $Config{make} || $ENV{MAKE};
+# Using an array of 0 or 1 elements makes the subsequent code simpler.
my @run = $Config{run};
@run = () if not defined $run[0] or $run[0] eq '';
-if (!defined($extspec) or $extspec eq '') {
- print "make_ext: no extension specified\n";
- exit(1);
-}
-# check link type and do any preliminaries. Valid link types are
-# 'dynamic', 'static', and 'static_pic' (the last one respects
-# CCCDLFLAGS such as -fPIC -- see static_target in the main Makefile.SH)
-if ($target eq 'dynamic') {
- unshift @pass_through, 'LINKTYPE=dynamic';
- $target = 'all';
-}
-elsif ($target eq 'static') {
- unshift @pass_through, 'LINKTYPE=static', 'CCCDLFLAGS=';
- $target = 'all';
-}
-elsif ($target eq 'static_pic') {
- unshift @pass_through, 'LINKTYPE=static';
- $target = 'all';
-}
-elsif ($target eq 'nonxs') {
- $target = 'all';
-}
-elsif ($target =~ /clean$/) {
+if ($target eq '') {
+ die "make_ext: no make target specified (eg all or clean)\n";
+} elsif ($target !~ /(?:^all|clean)$/) {
+ # for the time being we are strict about what make_ext is used for
+ die "$0: unknown make target '$target'\n";
}
-elsif ($target eq '') {
- print "make_ext: no make target specified (eg static or dynamic)\n";
- exit(1);
-}
-else {
- # for the time being we are strict about what make_ext is used for
- print "make_ext: unknown make target '$target'\n";
- exit(1);
+
+if (!@extspec and !$static and !$dynamic and !$nonxs) {
+ die "$0: no extension specified\n";
}
-# The Perl Makefile.SH will expand all extensions to
-# lib/auto/X/X.a (or lib/auto/X/Y/Y.a if nested)
-# A user wishing to run make_ext might use
-# X (or X/Y or X::Y if nested)
+my $perl;
+my %extra_passthrough;
-# canonise into X/Y form (pname)
+if ($is_Win32) {
+ (my $here = getcwd()) =~ s{/}{\\}g;
+ $perl = $^X;
+ if ($perl =~ m#^\.\.#) {
+ $perl = "$here\\$perl";
+ }
+ (my $topdir = $perl) =~ s/\\[^\\]+$//;
+ # miniperl needs to find perlglob and pl2bat
+ $ENV{PATH} = "$topdir;$topdir\\win32\\bin;$ENV{PATH}";
+ my $pl2bat = "$topdir\\win32\\bin\\pl2bat";
+ unless (-f "$pl2bat.bat") {
+ my @args = ($perl, ("$pl2bat.pl") x 2);
+ print "@args\n";
+ system(@args) unless defined $::Cross::platform;
+ }
-my $pname = $extspec;
-if ($extspec =~ /^lib/) {
- # Remove lib/auto prefix and /*.* suffix
- $pname =~ s{^lib/auto/}{};
- $pname =~ s{[^/]*\.[^/]*$}{};
-}
-elsif ($extspec =~ /^ext/) {
- # Remove ext/ prefix and /pm_to_blib suffix
- $pname =~ s{^ext/}{};
- $pname =~ s{/pm_to_blib$}{};
-}
-elsif ($extspec =~ /::/) {
- # Convert :: to /
- $pname =~ s{::}{\/}g;
+ print "In ", getcwd();
+ chdir($dir) || die "Cannot cd to $dir\n";
+ (my $ext = getcwd()) =~ s{/}{\\}g;
+ FindExt::scan_ext($ext);
+ FindExt::set_static_extensions(split ' ', $Config{static_ext});
+
+ my @ext;
+ push @ext, FindExt::static_ext() if $static;
+ push @ext, FindExt::dynamic_ext() if $dynamic;
+ push @ext, FindExt::nonxs_ext() if $nonxs;
+
+ foreach (sort @ext) {
+ if (%incl and !exists $incl{$_}) {
+ #warn "Skipping extension $ext\\$_, not in inclusion list\n";
+ next;
+ }
+ if (exists $excl{$_}) {
+ warn "Skipping extension $ext\\$_, not ported to current platform";
+ next;
+ }
+ push @extspec, $_;
+ if(FindExt::is_static($_)) {
+ push @{$extra_passthrough{$_}}, 'LINKTYPE=static';
+ }
+ }
+ chdir '..'; # now in the Perl build directory
}
-elsif ($extspec =~ /\..*o$/) {
- $pname =~ s/\..*o//;
+elsif ($is_VMS) {
+ $perl = $^X;
+ push @extspec, (split ' ', $Config{static_ext}) if $static;
+ push @extspec, (split ' ', $Config{dynamic_ext}) if $dynamic;
+ push @extspec, (split ' ', $Config{nonxs_ext}) if $nonxs;
}
-my $mname = $pname;
-$mname =~ s!/!::!g;
-my $depth = $pname;
-$depth =~ s![^/]+!..!g;
-# Always need one more .. for ext/
-my $up = "../$depth";
-my $perl = "$up/miniperl";
-
-if (not -d "ext/$pname") {
- print "\tSkipping $extspec (directory does not exist)\n";
- exit(0); # not an error ?
-}
+foreach my $spec (@extspec) {
+ my $mname = $spec;
+ $mname =~ s!/!::!g;
+ my $ext_pathname;
+ if (-d "ext/$spec") {
+ # Old style ext/Data/Dumper/
+ $ext_pathname = "ext/$spec";
+ } else {
+ # New style ext/Data-Dumper/
+ my $copy = $spec;
+ $copy =~ tr!/!-!;
+ $ext_pathname = "ext/$copy";
+ }
-if ($Config{osname} eq 'catamount') {
+ if ($Config{osname} eq 'catamount') {
# Snowball's chance of building extensions.
- print "This is $Config{osname}, not building $mname, sorry.\n";
- exit(0);
-}
+ die "This is $Config{osname}, not building $mname, sorry.\n";
+ }
-print "\tMaking $mname ($target)\n";
+ print "\tMaking $mname ($target)\n";
-build_extension('ext', "ext/$pname", $up, "$up/lib", \@pass_through);
+ build_extension($ext_pathname, $perl, $mname,
+ [@pass_through, @{$extra_passthrough{$spec} || []}]);
+}
sub build_extension {
- my ($ext, $ext_dir, $return_dir, $lib_dir, $pass_through) = @_;
+ my ($ext_dir, $perl, $mname, $pass_through) = @_;
+
+ my $up = $ext_dir;
+ $up =~ s![^/]+!..!g;
+
+ $perl ||= "$up/miniperl";
+ my $return_dir = $up;
+ my $lib_dir = "$up/lib";
+ $ENV{PERL5LIB}
+ = join $Config{path_sep}, $lib_dir, map {"$up/$_"} @toolchain;
+
unless (chdir "$ext_dir") {
warn "Cannot cd to $ext_dir: $!";
return;
}
+ my $makefile;
+ if ($is_VMS) {
+ $makefile = 'descrip.mms';
+ if ($target =~ /clean$/
+ && !-f $makefile
+ && -f "${makefile}_old") {
+ $makefile = "${makefile}_old";
+ }
+ } else {
+ $makefile = 'Makefile';
+ }
- if (!-f 'Makefile') {
+ if (!-f $makefile) {
+ if (!-f 'Makefile.PL') {
+ print "\nCreating Makefile.PL in $ext_dir for $mname\n";
+ # We need to cope well with various possible layouts
+ my @dirs = split /::/, $mname;
+ my $leaf = pop @dirs;
+ my $leafname = "$leaf.pm";
+ my $pathname = join '/', @dirs, $leafname;
+ my @locations = ($leafname, $pathname, "lib/$pathname");
+ my $fromname;
+ foreach (@locations) {
+ if (-f $_) {
+ $fromname = $_;
+ last;
+ }
+ }
+
+ unless ($fromname) {
+ die "For $mname tried @locations in in $ext_dir but can't find source";
+ }
+ open my $fh, '>', 'Makefile.PL'
+ or die "Can't open Makefile.PL for writing: $!";
+ print $fh <<"EOM";
+#-*- buffer-read-only: t -*-
+
+# This Makefile.PL was written by $0.
+# It will be deleted automatically by make realclean
+
+use strict;
+use ExtUtils::MakeMaker;
+
+WriteMakefile(
+ NAME => '$mname',
+ VERSION_FROM => '$fromname',
+ ABSTRACT_FROM => '$fromname',
+ realclean => {FILES => 'Makefile.PL'},
+);
+
+# ex: set ro:
+EOM
+ close $fh or die "Can't close Makefile.PL: $!";
+ }
print "\nRunning Makefile.PL in $ext_dir\n";
# Presumably this can be simplified
@cross = '-MCross';
}
- my @perl = (@run, $perl, "-I$lib_dir", @cross, 'Makefile.PL',
- 'INSTALLDIRS=perl', 'INSTALLMAN3DIR=none',
- @$pass_through);
- print join(' ', @perl), "\n";
- my $code = system @perl;
+ my @args = (@cross, 'Makefile.PL');
+ if ($is_VMS) {
+ my $libd = VMS::Filespec::vmspath($lib_dir);
+ push @args, "INST_LIB=$libd", "INST_ARCHLIB=$libd";
+ } else {
+ push @args, 'INSTALLDIRS=perl', 'INSTALLMAN1DIR=none',
+ 'INSTALLMAN3DIR=none';
+ }
+ push @args, @$pass_through;
+ _quote_args(\@args) if $is_VMS;
+ print join(' ', @run, $perl, @args), "\n";
+ my $code = system @run, $perl, @args;
warn "$code from $ext_dir\'s Makefile.PL" if $code;
# Right. The reason for this little hack is that we're sitting inside
if ($is_Unix) {
my $suffix = '.sh';
foreach my $clean_target ('realclean', 'veryclean') {
- my $file = "../$depth/$clean_target$suffix";
+ my $file = "$return_dir/$clean_target$suffix";
open my $fh, '>>', $file or die "open $file: $!";
# Quite possible that we're being run in parallel here.
# Can't use Fcntl this early to get the LOCK_EX
cd $ext_dir
if test ! -f Makefile -a -f Makefile.old; then
echo "Note: Using Makefile.old"
- make -f Makefile.old $clean_target MAKE=$make @pass_through
+ make -f Makefile.old $clean_target MAKE='@make' @pass_through
else
if test ! -f Makefile ; then
echo "Warning: No Makefile!"
fi
- make $clean_target MAKE=$make @pass_through
+ make $clean_target MAKE='@make' @pass_through
fi
cd $return_dir
EOS
}
}
- if (not -f 'Makefile') {
+ if (not -f $makefile) {
print "Warning: No Makefile!\n";
}
+ if ($is_VMS) {
+ _macroify_passthrough($pass_through);
+ unshift @$pass_through, "/DESCRIPTION=$makefile";
+ }
+
if (!$target or $target !~ /clean$/) {
# Give makefile an opportunity to rewrite itself.
# reassure users that life goes on...
- my @config = (@run, $make, 'config', @$pass_through);
- system @config and print "@config failed, continuing anyway...\n";
+ my @args = ('config', @$pass_through);
+ _quote_args(\@args) if $is_VMS;
+ system(@run, @make, @args) and print "@run @make @args failed, continuing anyway...\n";
}
- my @targ = (@run, $make, $target, @$pass_through);
- print "Making $target in $ext_dir\n$@targ\n";
- my $code = system @targ;
+ my @targ = ($target, @$pass_through);
+ _quote_args(\@targ) if $is_VMS;
+ print "Making $target in $ext_dir\n@run @make @targ\n";
+ my $code = system(@run, @make, @targ);
die "Unsuccessful make($ext_dir): code=$code" if $code != 0;
chdir $return_dir || die "Cannot cd to $return_dir: $!";
}
+
+sub _quote_args {
+ my $args = shift; # must be array reference
+
+ # Do not quote qualifiers that begin with '/'.
+ map { if (!/^\//) {
+ $_ =~ s/\"/""/g; # escape C<"> by doubling
+ $_ = q(").$_.q(");
+ }
+ } @{$args}
+ ;
+}
+
+sub _macroify_passthrough {
+ my $passthrough = shift;
+ _quote_args($passthrough);
+ my $macro = '/MACRO=(' . join(',',@$passthrough) . ')';
+ @$passthrough = ();
+ @$passthrough[0] = $macro;
+}