# the test / diffusion / acceptance phase; those are marked with flag
# 'LDNOTE' (note by laurent.dami AT free.fr)
-use Carp;
use strict;
use warnings;
-use List::Util qw/first/;
-use Scalar::Util qw/blessed/;
+use Carp ();
+use List::Util ();
+use Scalar::Util ();
#======================================================================
# GLOBALS
#======================================================================
-our $VERSION = '1.49_05';
-$VERSION = eval $VERSION; # numify for warning-free dev releases
+our $VERSION = '1.74';
+# This would confuse some packagers
+$VERSION = eval $VERSION if $VERSION =~ /_/; # numify for warning-free dev releases
our $AUTOLOAD;
# special operators (-in, -between). May be extended/overridden by user.
# See section WHERE: BUILTIN SPECIAL OPERATORS below for implementation
my @BUILTIN_SPECIAL_OPS = (
- {regex => qr/^(not )?between$/i, handler => \&_where_field_BETWEEN},
- {regex => qr/^(not )?in$/i, handler => \&_where_field_IN},
+ {regex => qr/^ (?: not \s )? between $/ix, handler => '_where_field_BETWEEN'},
+ {regex => qr/^ (?: not \s )? in $/ix, handler => '_where_field_IN'},
+ {regex => qr/^ ident $/ix, handler => '_where_op_IDENT'},
+ {regex => qr/^ value $/ix, handler => '_where_op_VALUE'},
+);
+
+# unaryish operators - key maps to handler
+my @BUILTIN_UNARY_OPS = (
+ # the digits are backcompat stuff
+ { regex => qr/^ and (?: [_\s]? \d+ )? $/xi, handler => '_where_op_ANDOR' },
+ { regex => qr/^ or (?: [_\s]? \d+ )? $/xi, handler => '_where_op_ANDOR' },
+ { regex => qr/^ nest (?: [_\s]? \d+ )? $/xi, handler => '_where_op_NEST' },
+ { regex => qr/^ (?: not \s )? bool $/xi, handler => '_where_op_BOOL' },
+ { regex => qr/^ ident $/xi, handler => '_where_op_IDENT' },
+ { regex => qr/^ value $/ix, handler => '_where_op_VALUE' },
);
#======================================================================
sub belch (@) {
my($func) = (caller(1))[3];
- carp "[$func] Warning: ", @_;
+ Carp::carp "[$func] Warning: ", @_;
}
sub puke (@) {
my($func) = (caller(1))[3];
- croak "[$func] Fatal: ", @_;
+ Carp::croak "[$func] Fatal: ", @_;
}
delete $opt{case} if $opt{case} && $opt{case} ne 'lower';
# default logic for interpreting arrayrefs
- $opt{logic} = uc $opt{logic} || 'OR';
+ $opt{logic} = $opt{logic} ? uc $opt{logic} : 'OR';
# how to return bind vars
# LDNOTE: changed nwiger code : why this 'delete' ??
# default comparison is "=", but can be overridden
$opt{cmp} ||= '=';
- # try to recognize which are the 'equality' and 'unequality' ops
+ # try to recognize which are the 'equality' and 'inequality' ops
# (temporary quickfix, should go through a more seasoned API)
- $opt{equality_op} = qr/^(\Q$opt{cmp}\E|is|(is\s+)?like)$/i;
- $opt{inequality_op} = qr/^(!=|<>|(is\s+)?not(\s+like)?)$/i;
+ $opt{equality_op} = qr/^(\Q$opt{cmp}\E|is|(is\s+)?like)$/i;
+ $opt{inequality_op} = qr/^(!=|<>|(is\s+)?not(\s+like)?)$/i;
# SQL booleans
$opt{sqltrue} ||= '1=1';
$opt{sqlfalse} ||= '0=1';
- # special operators
+ # special operators
$opt{special_ops} ||= [];
+ # regexes are applied in order, thus push after user-defines
push @{$opt{special_ops}}, @BUILTIN_SPECIAL_OPS;
+ # unary operators
+ $opt{unary_ops} ||= [];
+ push @{$opt{unary_ops}}, @BUILTIN_UNARY_OPS;
+
+ # rudimentary sanity-check for user supplied bits treated as functions/operators
+ # If a purported function matches this regular expression, an exception is thrown.
+ # Literal SQL is *NOT* subject to this check, only functions (and column names
+ # when quoting is not in effect)
+
+ # FIXME
+ # need to guard against ()'s in column names too, but this will break tons of
+ # hacks... ideas anyone?
+ $opt{injection_guard} ||= qr/
+ \;
+ |
+ ^ \s* go \s
+ /xmi;
+
return bless \%opt, $class;
}
+sub _assert_pass_injection_guard {
+ if ($_[1] =~ $_[0]->{injection_guard}) {
+ my $class = ref $_[0];
+ puke "Possible SQL injection attempt '$_[1]'. If this is indeed a part of the "
+ . "desired SQL use literal SQL ( \'...' or \[ '...' ] ) or supply your own "
+ . "{injection_guard} attribute to ${class}->new()"
+ }
+}
+
#======================================================================
# INSERT methods
#======================================================================
sub insert {
- my $self = shift;
- my $table = $self->_table(shift);
- my $data = shift || return;
+ my $self = shift;
+ my $table = $self->_table(shift);
+ my $data = shift || return;
+ my $options = shift;
my $method = $self->_METHOD_FOR_refkind("_insert", $data);
- my ($sql, @bind) = $self->$method($data);
+ my ($sql, @bind) = $self->$method($data);
$sql = join " ", $self->_sqlcase('insert into'), $table, $sql;
+
+ if ($options->{returning}) {
+ my ($s, @b) = $self->_insert_returning ($options);
+ $sql .= $s;
+ push @bind, @b;
+ }
+
return wantarray ? ($sql, @bind) : $sql;
}
+sub _insert_returning {
+ my ($self, $options) = @_;
+
+ my $f = $options->{returning};
+
+ my $fieldlist = $self->_SWITCH_refkind($f, {
+ ARRAYREF => sub {join ', ', map { $self->_quote($_) } @$f;},
+ SCALAR => sub {$self->_quote($f)},
+ SCALARREF => sub {$$f},
+ });
+ return $self->_sqlcase(' returning ') . $fieldlist;
+}
+
sub _insert_HASHREF { # explicit list of fields and then values
my ($self, $data) = @_;
$self->_SWITCH_refkind($v, {
- ARRAYREF => sub {
+ ARRAYREF => sub {
if ($self->{array_datatypes}) { # if array datatype are activated
push @values, '?';
push @all_bind, $self->_bindtype($column, $v);
push @all_bind, @bind;
},
- # THINK : anything useful to do with a HASHREF ?
+ # THINK : anything useful to do with a HASHREF ?
HASHREF => sub { # (nothing, but old SQLA passed it through)
#TODO in SQLA >= 2.0 it will die instead
belch "HASH ref as bind value in insert is not supported";
my $label = $self->_quote($k);
$self->_SWITCH_refkind($v, {
- ARRAYREF => sub {
+ ARRAYREF => sub {
if ($self->{array_datatypes}) { # array datatype
push @set, "$label = ?";
push @all_bind, $self->_bindtype($k, $v);
},
SCALARREF => sub { # literal SQL without bind
push @set, "$label = $$v";
- },
+ },
+ HASHREF => sub {
+ my ($op, $arg, @rest) = %$v;
+
+ puke 'Operator calls in update must be in the form { -op => $arg }'
+ if (@rest or not $op =~ /^\-(.+)/);
+
+ local $self->{_nested_func_lhs} = $k;
+ my ($sql, @bind) = $self->_where_unary_op ($1, $arg);
+
+ push @set, "$label = $sql";
+ push @all_bind, @bind;
+ },
SCALAR_or_UNDEF => sub {
push @set, "$label = ?";
push @all_bind, $self->_bindtype($k, $v);
my $f = (ref $fields eq 'ARRAY') ? join ', ', map { $self->_quote($_) } @$fields
: $fields;
- my $sql = join(' ', $self->_sqlcase('select'), $f,
+ my $sql = join(' ', $self->_sqlcase('select'), $f,
$self->_sqlcase('from'), $table)
. $where_sql;
- return wantarray ? ($sql, @bind) : $sql;
+ return wantarray ? ($sql, @bind) : $sql;
}
#======================================================================
my($where_sql, @bind) = $self->where($where);
my $sql = $self->_sqlcase('delete from') . " $table" . $where_sql;
- return wantarray ? ($sql, @bind) : $sql;
+ return wantarray ? ($sql, @bind) : $sql;
}
$sql .= $self->_order_by($order);
}
- return wantarray ? ($sql, @bind) : $sql;
+ return wantarray ? ($sql, @bind) : $sql;
}
# dispatch on appropriate method according to refkind of $where
my $method = $self->_METHOD_FOR_refkind("_where", $where);
+ my ($sql, @bind) = $self->$method($where, $logic);
- my ($sql, @bind) = $self->$method($where, $logic);
-
- # DBIx::Class directly calls _recurse_where in scalar context, so
+ # DBIx::Class directly calls _recurse_where in scalar context, so
# we must implement it, even if not in the official API
- return wantarray ? ($sql, @bind) : $sql;
+ return wantarray ? ($sql, @bind) : $sql;
}
my @clauses = @$where;
- # if the array starts with [-and|or => ...], recurse with that logic
- my $first = $clauses[0] || '';
- if ($first =~ /^-(and|or)/i) {
- $logic = $1;
- shift @clauses;
- return $self->_where_ARRAYREF(\@clauses, $logic);
- }
-
- #otherwise..
my (@sql_clauses, @all_bind);
-
# need to use while() so can shift() for pairs
- while (my $el = shift @clauses) {
+ while (my $el = shift @clauses) {
# switch according to kind of $el and get corresponding ($sql, @bind)
my ($sql, @bind) = $self->_SWITCH_refkind($el, {
# skip empty elements, otherwise get invalid trailing AND stuff
ARRAYREF => sub {$self->_recurse_where($el) if @$el},
- ARRAYREFREF => sub { @{${$el}} if @{${$el}}},
+ ARRAYREFREF => sub {
+ my ($s, @b) = @$$el;
+ $self->_assert_bindval_matches_bindtype(@b);
+ ($s, @b);
+ },
HASHREF => sub {$self->_recurse_where($el, 'and') if %$el},
# LDNOTE : previous SQLA code for hashrefs was creating a dirty
# side-effect: the first hashref within an array would change
# the global logic to 'AND'. So [ {cond1, cond2}, [cond3, cond4] ]
- # was interpreted as "(cond1 AND cond2) OR (cond3 AND cond4)",
+ # was interpreted as "(cond1 AND cond2) OR (cond3 AND cond4)",
# whereas it should be "(cond1 AND cond2) OR (cond3 OR cond4)".
SCALARREF => sub { ($$el); },
sub _where_ARRAYREFREF {
my ($self, $where) = @_;
- my ($sql, @bind) = @{${$where}};
-
+ my ($sql, @bind) = @$$where;
+ $self->_assert_bindval_matches_bindtype(@bind);
return ($sql, @bind);
}
my ($self, $where) = @_;
my (@sql_clauses, @all_bind);
- # LDNOTE : don't really know why we need to sort keys
- for my $k (sort keys %$where) {
+ for my $k (sort keys %$where) {
my $v = $where->{$k};
- # ($k => $v) is either a special op or a regular hashpair
- my ($sql, @bind) = ($k =~ /^-(.+)/) ? $self->_where_op_in_hash($1, $v)
- : do {
- my $method = $self->_METHOD_FOR_refkind("_where_hashpair", $v);
- $self->$method($k, $v);
- };
+ # ($k => $v) is either a special unary op or a regular hashpair
+ my ($sql, @bind) = do {
+ if ($k =~ /^-./) {
+ # put the operator in canonical form
+ my $op = $k;
+ $op = substr $op, 1; # remove initial dash
+ $op =~ s/^\s+|\s+$//g;# remove leading/trailing space
+ $op =~ s/\s+/ /g; # compress whitespace
+
+ # so that -not_foo works correctly
+ $op =~ s/^not_/NOT /i;
+
+ $self->_debug("Unary OP(-$op) within hashref, recursing...");
+ my ($s, @b) = $self->_where_unary_op ($op, $v);
+
+ # top level vs nested
+ # we assume that handled unary ops will take care of their ()s
+ $s = "($s)" unless (
+ List::Util::first {$op =~ $_->{regex}} @{$self->{unary_ops}}
+ or
+ defined($self->{_nested_func_lhs}) && ($self->{_nested_func_lhs} eq $k)
+ );
+ ($s, @b);
+ }
+ else {
+ my $method = $self->_METHOD_FOR_refkind("_where_hashpair", $v);
+ $self->$method($k, $v);
+ }
+ };
push @sql_clauses, $sql;
push @all_bind, @bind;
return $self->_join_sql_clauses('and', \@sql_clauses, \@all_bind);
}
+sub _where_unary_op {
+ my ($self, $op, $rhs) = @_;
+
+ if (my $op_entry = List::Util::first {$op =~ $_->{regex}} @{$self->{unary_ops}}) {
+ my $handler = $op_entry->{handler};
+
+ if (not ref $handler) {
+ if ($op =~ s/ [_\s]? \d+ $//x ) {
+ belch 'Use of [and|or|nest]_N modifiers is deprecated and will be removed in SQLA v2.0. '
+ . "You probably wanted ...-and => [ -$op => COND1, -$op => COND2 ... ]";
+ }
+ return $self->$handler ($op, $rhs);
+ }
+ elsif (ref $handler eq 'CODE') {
+ return $handler->($self, $op, $rhs);
+ }
+ else {
+ puke "Illegal handler for operator $op - expecting a method name or a coderef";
+ }
+ }
-sub _where_op_in_hash {
- my ($self, $op, $v) = @_;
+ $self->_debug("Generic unary OP: $op - recursing as function");
- $op =~ /^(AND|OR|NEST)[_\d]*/i
- or puke "unknown operator: -$op";
- $op = uc($1); # uppercase, remove trailing digits
- $self->_debug("OP(-$op) within hashref, recursing...");
+ $self->_assert_pass_injection_guard($op);
- $self->_SWITCH_refkind($v, {
+ my ($sql, @bind) = $self->_SWITCH_refkind ($rhs, {
+ SCALAR => sub {
+ puke "Illegal use of top-level '$op'"
+ unless $self->{_nested_func_lhs};
+ return (
+ $self->_convert('?'),
+ $self->_bindtype($self->{_nested_func_lhs}, $rhs)
+ );
+ },
+ FALLBACK => sub {
+ $self->_recurse_where ($rhs)
+ },
+ });
+
+ $sql = sprintf ('%s %s',
+ $self->_sqlcase($op),
+ $sql,
+ );
+
+ return ($sql, @bind);
+}
+
+sub _where_op_ANDOR {
+ my ($self, $op, $v) = @_;
+
+ $self->_SWITCH_refkind($v, {
ARRAYREF => sub {
- # LDNOTE : should deprecate {-or => [...]} and {-and => [...]}
- # because they are misleading; the only proper way would be
- # -nest => [-or => ...], -nest => [-and ...]
- return $self->_where_ARRAYREF($v, $op eq 'NEST' ? '' : $op);
+ return $self->_where_ARRAYREF($v, $op);
},
HASHREF => sub {
- if ($op eq 'OR') {
- belch "-or => {...} should be -nest => [...]";
- return $self->_where_ARRAYREF([%$v], 'OR');
- }
- else { # NEST | AND
- return $self->_where_HASHREF($v);
- }
+ return ( $op =~ /^or/i )
+ ? $self->_where_ARRAYREF( [ map { $_ => $v->{$_} } ( sort keys %$v ) ], $op )
+ : $self->_where_HASHREF($v);
},
- SCALARREF => sub { # literal SQL
- $op eq 'NEST'
- or puke "-$op => \\\$scalar not supported, use -nest => ...";
- return ($$v);
+ SCALARREF => sub {
+ puke "-$op => \\\$scalar makes little sense, use " .
+ ($op =~ /^or/i
+ ? '[ \$scalar, \%rest_of_conditions ] instead'
+ : '-and => [ \$scalar, \%rest_of_conditions ] instead'
+ );
},
- ARRAYREFREF => sub { # literal SQL
- $op eq 'NEST'
- or puke "-$op => \\[..] not supported, use -nest => ...";
- return @{${$v}};
+ ARRAYREFREF => sub {
+ puke "-$op => \\[...] makes little sense, use " .
+ ($op =~ /^or/i
+ ? '[ \[...], \%rest_of_conditions ] instead'
+ : '-and => [ \[...], \%rest_of_conditions ] instead'
+ );
+ },
+
+ SCALAR => sub { # permissively interpreted as SQL
+ puke "-$op => \$value makes little sense, use -bool => \$value instead";
+ },
+
+ UNDEF => sub {
+ puke "-$op => undef not supported";
},
+ });
+}
+
+sub _where_op_NEST {
+ my ($self, $op, $v) = @_;
+
+ $self->_SWITCH_refkind($v, {
SCALAR => sub { # permissively interpreted as SQL
- $op eq 'NEST'
- or puke "-$op => 'scalar' not supported, use -nest => \\'scalar'";
belch "literal SQL should be -nest => \\'scalar' "
. "instead of -nest => 'scalar' ";
- return ($v);
+ return ($v);
},
UNDEF => sub {
puke "-$op => undef not supported";
},
+
+ FALLBACK => sub {
+ $self->_recurse_where ($v);
+ },
+
});
}
+sub _where_op_BOOL {
+ my ($self, $op, $v) = @_;
+
+ my ($s, @b) = $self->_SWITCH_refkind($v, {
+ SCALAR => sub { # interpreted as SQL column
+ $self->_convert($self->_quote($v));
+ },
+
+ UNDEF => sub {
+ puke "-$op => undef not supported";
+ },
+
+ FALLBACK => sub {
+ $self->_recurse_where ($v);
+ },
+ });
+
+ $s = "(NOT $s)" if $op =~ /^not/i;
+ ($s, @b);
+}
+
+
+sub _where_op_IDENT {
+ my $self = shift;
+ my ($op, $rhs) = splice @_, -2;
+ if (ref $rhs) {
+ puke "-$op takes a single scalar argument (a quotable identifier)";
+ }
+
+ # in case we are called as a top level special op (no '=')
+ my $lhs = shift;
+
+ $_ = $self->_convert($self->_quote($_)) for ($lhs, $rhs);
+
+ return $lhs
+ ? "$lhs = $rhs"
+ : $rhs
+ ;
+}
+
+sub _where_op_VALUE {
+ my $self = shift;
+ my ($op, $rhs) = splice @_, -2;
+
+ # in case we are called as a top level special op (no '=')
+ my $lhs = shift;
+
+ my @bind =
+ $self->_bindtype (
+ ($lhs || $self->{_nested_func_lhs}),
+ $rhs,
+ )
+ ;
+
+ return $lhs
+ ? (
+ $self->_convert($self->_quote($lhs)) . ' = ' . $self->_convert('?'),
+ @bind
+ )
+ : (
+ $self->_convert('?'),
+ @bind,
+ )
+ ;
+}
+
sub _where_hashpair_ARRAYREF {
my ($self, $k, $v) = @_;
$self->_debug("ARRAY($k) means distribute over elements");
# put apart first element if it is an operator (-and, -or)
- my $op = $v[0] =~ /^-/ ? shift @v : undef;
- $self->_debug("OP($op) reinjected into the distributed array") if $op;
-
+ my $op = (
+ (defined $v[0] && $v[0] =~ /^ - (?: AND|OR ) $/ix)
+ ? shift @v
+ : ''
+ );
my @distributed = map { {$k => $_} } @v;
- unshift @distributed, $op if $op;
- return $self->_recurse_where(\@distributed);
- }
+ if ($op) {
+ $self->_debug("OP($op) reinjected into the distributed array");
+ unshift @distributed, $op;
+ }
+
+ my $logic = $op ? substr($op, 1) : '';
+
+ return $self->_recurse_where(\@distributed, $logic);
+ }
else {
# LDNOTE : not sure of this one. What does "distribute over nothing" mean?
$self->_debug("empty ARRAY($k) means 0=1");
}
sub _where_hashpair_HASHREF {
- my ($self, $k, $v) = @_;
+ my ($self, $k, $v, $logic) = @_;
+ $logic ||= 'and';
+
+ local $self->{_nested_func_lhs} = $self->{_nested_func_lhs};
- my (@all_sql, @all_bind);
+ my ($all_sql, @all_bind);
- for my $op (sort keys %$v) {
- my $val = $v->{$op};
+ for my $orig_op (sort keys %$v) {
+ my $val = $v->{$orig_op};
# put the operator in canonical form
- $op =~ s/^-//; # remove initial dash
- $op =~ tr/_/ /; # underscores become spaces
- $op =~ s/^\s+//; # no initial space
- $op =~ s/\s+$//; # no final space
- $op =~ s/\s+/ /; # multiple spaces become one
+ my $op = $orig_op;
+
+ # FIXME - we need to phase out dash-less ops
+ $op =~ s/^-//; # remove possible initial dash
+ $op =~ s/^\s+|\s+$//g;# remove leading/trailing space
+ $op =~ s/\s+/ /g; # compress whitespace
+
+ $self->_assert_pass_injection_guard($op);
+
+ # so that -not_foo works correctly
+ $op =~ s/^not_/NOT /i;
my ($sql, @bind);
+ # CASE: col-value logic modifiers
+ if ( $orig_op =~ /^ \- (and|or) $/xi ) {
+ ($sql, @bind) = $self->_where_hashpair_HASHREF($k, $val, $1);
+ }
# CASE: special operators like -in or -between
- my $special_op = first {$op =~ $_->{regex}} @{$self->{special_ops}};
- if ($special_op) {
- ($sql, @bind) = $special_op->{handler}->($self, $k, $op, $val);
+ elsif ( my $special_op = List::Util::first {$op =~ $_->{regex}} @{$self->{special_ops}} ) {
+ my $handler = $special_op->{handler};
+ if (! $handler) {
+ puke "No handler supplied for special operator $orig_op";
+ }
+ elsif (not ref $handler) {
+ ($sql, @bind) = $self->$handler ($k, $op, $val);
+ }
+ elsif (ref $handler eq 'CODE') {
+ ($sql, @bind) = $handler->($self, $k, $op, $val);
+ }
+ else {
+ puke "Illegal handler for special operator $orig_op - expecting a method name or a coderef";
+ }
}
else {
$self->_SWITCH_refkind($val, {
($sql, @bind) = $self->_where_field_op_ARRAYREF($k, $op, $val);
},
- SCALARREF => sub { # CASE: col => {op => \$scalar} (literal SQL without bind)
- $sql = join ' ', $self->_convert($self->_quote($k)),
- $self->_sqlcase($op),
- $$val;
- },
-
ARRAYREFREF => sub { # CASE: col => {op => \[$sql, @bind]} (literal SQL with bind)
my ($sub_sql, @sub_bind) = @$$val;
$self->_assert_bindval_matches_bindtype(@sub_bind);
UNDEF => sub { # CASE: col => {op => undef} : sql "IS (NOT)? NULL"
my $is = ($op =~ $self->{equality_op}) ? 'is' :
($op =~ $self->{inequality_op}) ? 'is not' :
- puke "unexpected operator '$op' with undef operand";
+ puke "unexpected operator '$orig_op' with undef operand";
$sql = $self->_quote($k) . $self->_sqlcase(" $is null");
},
-
- FALLBACK => sub { # CASE: col => {op => $scalar}
- $sql = join ' ', $self->_convert($self->_quote($k)),
- $self->_sqlcase($op),
- $self->_convert('?');
- @bind = $self->_bindtype($k, $val);
+
+ FALLBACK => sub { # CASE: col => {op/func => $stuff}
+
+ # retain for proper column type bind
+ $self->{_nested_func_lhs} ||= $k;
+
+ ($sql, @bind) = $self->_where_unary_op ($op, $val);
+
+ $sql = join (' ',
+ $self->_convert($self->_quote($k)),
+ $self->{_nested_func_lhs} eq $k ? $sql : "($sql)", # top level vs nested
+ );
},
});
}
- push @all_sql, $sql;
+ ($all_sql) = (defined $all_sql and $all_sql) ? $self->_join_sql_clauses($logic, [$all_sql, $sql], []) : $sql;
push @all_bind, @bind;
}
-
- return $self->_join_sql_clauses('and', \@all_sql, \@all_bind);
+ return ($all_sql, @all_bind);
}
sub _where_field_op_ARRAYREF {
my ($self, $k, $op, $vals) = @_;
- if(@$vals) {
- $self->_debug("ARRAY($vals) means multiple elements: [ @$vals ]");
+ my @vals = @$vals; #always work on a copy
+
+ if(@vals) {
+ $self->_debug(sprintf '%s means multiple elements: [ %s ]',
+ $vals,
+ join (', ', map { defined $_ ? "'$_'" : 'NULL' } @vals ),
+ );
+ # see if the first element is an -and/-or op
+ my $logic;
+ if (defined $vals[0] && $vals[0] =~ /^ - ( AND|OR ) $/ix) {
+ $logic = uc $1;
+ shift @vals;
+ }
+ # distribute $op over each remaining member of @vals, append logic if exists
+ return $self->_recurse_where([map { {$k => {$op, $_}} } @vals], $logic);
- # LDNOTE : change the distribution logic when
- # $op =~ $self->{inequality_op}, because of Morgan laws :
+ # LDNOTE : had planned to change the distribution logic when
+ # $op =~ $self->{inequality_op}, because of Morgan laws :
# with {field => {'!=' => [22, 33]}}, it would be ridiculous to generate
- # WHERE field != 22 OR field != 33 : the user probably means
+ # WHERE field != 22 OR field != 33 : the user probably means
# WHERE field != 22 AND field != 33.
- my $logic = ($op =~ $self->{inequality_op}) ? 'AND' : 'OR';
+ # To do this, replace the above to roughly :
+ # my $logic = ($op =~ $self->{inequality_op}) ? 'AND' : 'OR';
+ # return $self->_recurse_where([map { {$k => {$op, $_}} } @vals], $logic);
- # distribute $op over each member of @$vals
- return $self->_recurse_where([map { {$k => {$op, $_}} } @$vals], $logic);
-
- }
+ }
else {
- # try to DWIM on equality operators
+ # try to DWIM on equality operators
# LDNOTE : not 100% sure this is the correct thing to do ...
return ($self->{sqlfalse}) if $op =~ $self->{equality_op};
return ($self->{sqltrue}) if $op =~ $self->{inequality_op};
sub _where_hashpair_ARRAYREFREF {
my ($self, $k, $v) = @_;
$self->_debug("REF($k) means literal SQL: @${$v}");
- my ($sql, @bind) = @${$v};
+ my ($sql, @bind) = @$$v;
$self->_assert_bindval_matches_bindtype(@bind);
$sql = $self->_quote($k) . " " . $sql;
return ($sql, @bind );
sub _where_hashpair_SCALAR {
my ($self, $k, $v) = @_;
$self->_debug("NOREF($k) means simple key=val: $k $self->{cmp} $v");
- my $sql = join ' ', $self->_convert($self->_quote($k)),
- $self->_sqlcase($self->{cmp}),
+ my $sql = join ' ', $self->_convert($self->_quote($k)),
+ $self->_sqlcase($self->{cmp}),
$self->_convert('?');
my @bind = $self->_bindtype($k, $v);
return ( $sql, @bind);
sub _where_field_BETWEEN {
my ($self, $k, $op, $vals) = @_;
- ref $vals eq 'ARRAY' && @$vals == 2
- or puke "special op 'between' requires an arrayref of two values";
-
- my ($label) = $self->_convert($self->_quote($k));
- my ($placeholder) = $self->_convert('?');
- my $and = $self->_sqlcase('and');
+ my ($label, $and, $placeholder);
+ $label = $self->_convert($self->_quote($k));
+ $and = ' ' . $self->_sqlcase('and') . ' ';
+ $placeholder = $self->_convert('?');
$op = $self->_sqlcase($op);
- my $sql = "( $label $op $placeholder $and $placeholder )";
- my @bind = $self->_bindtype($k, @$vals);
+ my ($clause, @bind) = $self->_SWITCH_refkind($vals, {
+ ARRAYREFREF => sub {
+ my ($s, @b) = @$$vals;
+ $self->_assert_bindval_matches_bindtype(@b);
+ ($s, @b);
+ },
+ SCALARREF => sub {
+ return $$vals;
+ },
+ ARRAYREF => sub {
+ puke "special op 'between' accepts an arrayref with exactly two values"
+ if @$vals != 2;
+
+ my (@all_sql, @all_bind);
+ foreach my $val (@$vals) {
+ my ($sql, @bind) = $self->_SWITCH_refkind($val, {
+ SCALAR => sub {
+ return ($placeholder, $self->_bindtype($k, $val) );
+ },
+ SCALARREF => sub {
+ return $$val;
+ },
+ ARRAYREFREF => sub {
+ my ($sql, @bind) = @$$val;
+ $self->_assert_bindval_matches_bindtype(@bind);
+ return ($sql, @bind);
+ },
+ HASHREF => sub {
+ my ($func, $arg, @rest) = %$val;
+ puke ("Only simple { -func => arg } functions accepted as sub-arguments to BETWEEN")
+ if (@rest or $func !~ /^ \- (.+)/x);
+ local $self->{_nested_func_lhs} = $k;
+ $self->_where_unary_op ($1 => $arg);
+ }
+ });
+ push @all_sql, $sql;
+ push @all_bind, @bind;
+ }
+
+ return (
+ (join $and, @all_sql),
+ @all_bind
+ );
+ },
+ FALLBACK => sub {
+ puke "special op 'between' accepts an arrayref with two values, or a single literal scalarref/arrayref-ref";
+ },
+ });
+
+ my $sql = "( $label $op $clause )";
return ($sql, @bind)
}
my ($sql, @bind) = $self->_SWITCH_refkind($vals, {
ARRAYREF => sub { # list of choices
if (@$vals) { # nonempty list
- my $placeholders = join ", ", (($placeholder) x @$vals);
- my $sql = "$label $op ( $placeholders )";
- my @bind = $self->_bindtype($k, @$vals);
+ my (@all_sql, @all_bind);
+
+ for my $val (@$vals) {
+ my ($sql, @bind) = $self->_SWITCH_refkind($val, {
+ SCALAR => sub {
+ return ($placeholder, $val);
+ },
+ SCALARREF => sub {
+ return $$val;
+ },
+ ARRAYREFREF => sub {
+ my ($sql, @bind) = @$$val;
+ $self->_assert_bindval_matches_bindtype(@bind);
+ return ($sql, @bind);
+ },
+ HASHREF => sub {
+ my ($func, $arg, @rest) = %$val;
+ puke ("Only simple { -func => arg } functions accepted as sub-arguments to IN")
+ if (@rest or $func !~ /^ \- (.+)/x);
+ local $self->{_nested_func_lhs} = $k;
+ $self->_where_unary_op ($1 => $arg);
+ },
+ UNDEF => sub {
+ puke(
+ 'SQL::Abstract before v1.75 used to generate incorrect SQL when the '
+ . "-$op operator was given an undef-containing list: !!!AUDIT YOUR CODE "
+ . 'AND DATA!!! (the upcoming Data::Query-based version of SQL::Abstract '
+ . 'will emit the logically correct SQL instead of raising this exception)'
+ );
+ },
+ });
+ push @all_sql, $sql;
+ push @all_bind, @bind;
+ }
- return ($sql, @bind);
+ return (
+ sprintf ('%s %s ( %s )',
+ $label,
+ $op,
+ join (', ', @all_sql)
+ ),
+ $self->_bindtype($k, @all_bind),
+ );
}
else { # empty list : some databases won't understand "IN ()", so DWIM
my $sql = ($op =~ /\bnot\b/i) ? $self->{sqltrue} : $self->{sqlfalse};
}
},
+ SCALARREF => sub { # literal SQL
+ my $sql = $self->_open_outer_paren ($$vals);
+ return ("$label $op ( $sql )");
+ },
ARRAYREFREF => sub { # literal SQL with bind
my ($sql, @bind) = @$$vals;
$self->_assert_bindval_matches_bindtype(@bind);
+ $sql = $self->_open_outer_paren ($sql);
return ("$label $op ( $sql )", @bind);
},
FALLBACK => sub {
- puke "special op 'in' requires an arrayref (or arrayref-ref)";
+ puke "special op 'in' requires an arrayref (or scalarref/arrayref-ref)";
},
});
return ($sql, @bind);
}
-
-
-
+# Some databases (SQLite) treat col IN (1, 2) different from
+# col IN ( (1, 2) ). Use this to strip all outer parens while
+# adding them back in the corresponding method
+sub _open_outer_paren {
+ my ($self, $sql) = @_;
+ $sql = $1 while $sql =~ /^ \s* \( (.*) \) \s* $/xs;
+ return $sql;
+}
#======================================================================
sub _order_by {
my ($self, $arg) = @_;
- # construct list of ordering instructions
- my @order = $self->_SWITCH_refkind($arg, {
+ my (@sql, @bind);
+ for my $c ($self->_order_by_chunks ($arg) ) {
+ $self->_SWITCH_refkind ($c, {
+ SCALAR => sub { push @sql, $c },
+ ARRAYREF => sub { push @sql, shift @$c; push @bind, @$c },
+ });
+ }
+
+ my $sql = @sql
+ ? sprintf ('%s %s',
+ $self->_sqlcase(' order by'),
+ join (', ', @sql)
+ )
+ : ''
+ ;
+
+ return wantarray ? ($sql, @bind) : $sql;
+}
+
+sub _order_by_chunks {
+ my ($self, $arg) = @_;
+
+ return $self->_SWITCH_refkind($arg, {
ARRAYREF => sub {
- map {$self->_SWITCH_refkind($_, {
- SCALAR => sub {$self->_quote($_)},
- UNDEF => sub {},
- SCALARREF => sub {$$_}, # literal SQL, no quoting
- HASHREF => sub {$self->_order_by_hash($_)}
- }) } @$arg;
+ map { $self->_order_by_chunks ($_ ) } @$arg;
+ },
+
+ ARRAYREFREF => sub {
+ my ($s, @b) = @$$arg;
+ $self->_assert_bindval_matches_bindtype(@b);
+ [ $s, @b ];
},
SCALAR => sub {$self->_quote($arg)},
- UNDEF => sub {},
+
+ UNDEF => sub {return () },
+
SCALARREF => sub {$$arg}, # literal SQL, no quoting
- HASHREF => sub {$self->_order_by_hash($arg)},
- });
+ HASHREF => sub {
+ # get first pair in hash
+ my ($key, $val, @rest) = %$arg;
- # build SQL
- my $order = join ', ', @order;
- return $order ? $self->_sqlcase(' order by')." $order" : '';
-}
+ return () unless $key;
+ if ( @rest or not $key =~ /^-(desc|asc)/i ) {
+ puke "hash passed to _order_by must have exactly one key (-desc or -asc)";
+ }
-sub _order_by_hash {
- my ($self, $hash) = @_;
+ my $direction = $1;
- # get first pair in hash
- my ($key, $val) = each %$hash;
+ my @ret;
+ for my $c ($self->_order_by_chunks ($val)) {
+ my ($sql, @bind);
- # check if one pair was found and no other pair in hash
- $key && !(each %$hash)
- or puke "hash passed to _order_by must have exactly one key (-desc or -asc)";
+ $self->_SWITCH_refkind ($c, {
+ SCALAR => sub {
+ $sql = $c;
+ },
+ ARRAYREF => sub {
+ ($sql, @bind) = @$c;
+ },
+ });
- my ($order) = ($key =~ /^-(desc|asc)/i)
- or puke "invalid key in _order_by hash : $key";
+ $sql = $sql . ' ' . $self->_sqlcase($direction);
- return $self->_quote($val) ." ". $self->_sqlcase($order);
-}
+ push @ret, [ $sql, @bind];
+ }
+ return @ret;
+ },
+ });
+}
#======================================================================
ARRAYREF => sub {join ', ', map { $self->_quote($_) } @$from;},
SCALAR => sub {$self->_quote($from)},
SCALARREF => sub {$$from},
- ARRAYREFREF => sub {join ', ', @$from;},
});
}
# UTILITY FUNCTIONS
#======================================================================
+# highly optimized, as it's called way too often
sub _quote {
- my $self = shift;
- my $label = shift;
+ # my ($self, $label) = @_;
- $label or puke "can't quote an empty label";
-
- # left and right quote characters
- my ($ql, $qr, @other) = $self->_SWITCH_refkind($self->{quote_char}, {
- SCALAR => sub {($self->{quote_char}, $self->{quote_char})},
- ARRAYREF => sub {@{$self->{quote_char}}},
- UNDEF => sub {()},
- });
- not @other
- or puke "quote_char must be an arrayref of 2 values";
+ return '' unless defined $_[1];
+ return ${$_[1]} if ref($_[1]) eq 'SCALAR';
- # no quoting if no quoting chars
- $ql or return $label;
-
- # no quoting for literal SQL
- return $$label if ref($label) eq 'SCALAR';
-
- # separate table / column (if applicable)
- my $sep = $self->{name_sep} || '';
- my @to_quote = $sep ? split /\Q$sep\E/, $label : ($label);
+ unless ($_[0]->{quote_char}) {
+ $_[0]->_assert_pass_injection_guard($_[1]);
+ return $_[1];
+ }
- # do the quoting, except for "*" or for `table`.*
- my @quoted = map { $_ eq '*' ? $_: $ql.$_.$qr} @to_quote;
+ my $qref = ref $_[0]->{quote_char};
+ my ($l, $r);
+ if (!$qref) {
+ ($l, $r) = ( $_[0]->{quote_char}, $_[0]->{quote_char} );
+ }
+ elsif ($qref eq 'ARRAY') {
+ ($l, $r) = @{$_[0]->{quote_char}};
+ }
+ else {
+ puke "Unsupported quote_char format: $_[0]->{quote_char}";
+ }
- # reassemble and return.
- return join $sep, @quoted;
+ # parts containing * are naturally unquoted
+ return join( $_[0]->{name_sep}||'', map
+ { $_ eq '*' ? $_ : $l . $_ . $r }
+ ( $_[0]->{name_sep} ? split (/\Q$_[0]->{name_sep}\E/, $_[1] ) : $_[1] )
+ );
}
# Conversion, if applicable
sub _convert ($) {
- my ($self, $arg) = @_;
+ #my ($self, $arg) = @_;
# LDNOTE : modified the previous implementation below because
# it was not consistent : the first "return" is always an array,
# the second "return" is context-dependent. Anyway, _convert
-# seems always used with just a single argument, so make it a
+# seems always used with just a single argument, so make it a
# scalar function.
# return @_ unless $self->{convert};
# my $conv = $self->_sqlcase($self->{convert});
# my @ret = map { $conv.'('.$_.')' } @_;
# return wantarray ? @ret : $ret[0];
- if ($self->{convert}) {
- my $conv = $self->_sqlcase($self->{convert});
- $arg = $conv.'('.$arg.')';
+ if ($_[0]->{convert}) {
+ return $_[0]->_sqlcase($_[0]->{convert}) .'(' . $_[1] . ')';
}
- return $arg;
+ return $_[1];
}
# And bindtype
sub _bindtype (@) {
- my $self = shift;
- my($col, @vals) = @_;
+ #my ($self, $col, @vals) = @_;
- #LDNOTE : changed original implementation below because it did not make
+ #LDNOTE : changed original implementation below because it did not make
# sense when bindtype eq 'columns' and @vals > 1.
# return $self->{bindtype} eq 'columns' ? [ $col, @vals ] : @vals;
- return $self->{bindtype} eq 'columns' ? map {[$col, $_]} @vals : @vals;
+ # called often - tighten code
+ return $_[0]->{bindtype} eq 'columns'
+ ? map {[$_[1], $_]} @_[2 .. $#_]
+ : @_[2 .. $#_]
+ ;
}
# Dies if any element of @bind is not in [colname => value] format
# if bindtype is 'columns'.
sub _assert_bindval_matches_bindtype {
- my ($self, @bind) = @_;
-
+# my ($self, @bind) = @_;
+ my $self = shift;
if ($self->{bindtype} eq 'columns') {
- foreach my $val (@bind) {
- if (!defined $val || ref($val) ne 'ARRAY' || @$val != 2) {
- die "bindtype 'columns' selected, you need to pass: [column_name => bind_value]"
+ for (@_) {
+ if (!defined $_ || ref($_) ne 'ARRAY' || @$_ != 2) {
+ puke "bindtype 'columns' selected, you need to pass: [column_name => bind_value]"
}
}
}
# Fix SQL case, if so requested
sub _sqlcase {
- my $self = shift;
-
# LDNOTE: if $self->{case} is true, then it contains 'lower', so we
# don't touch the argument ... crooked logic, but let's not change it!
- return $self->{case} ? $_[0] : uc($_[0]);
+ return $_[0]->{case} ? $_[1] : uc($_[1]);
}
sub _refkind {
my ($self, $data) = @_;
- my $suffix = '';
- my $ref;
- my $n_steps = 0;
-
- while (1) {
- # blessed objects are treated like scalars
- $ref = (blessed $data) ? '' : ref $data;
- $n_steps += 1 if $ref;
- last if $ref ne 'REF';
- $data = $$data;
- }
- my $base = $ref || (defined $data ? 'SCALAR' : 'UNDEF');
+ return 'UNDEF' unless defined $data;
- return $base . ('REF' x $n_steps);
-}
+ # blessed objects are treated like scalars
+ my $ref = (Scalar::Util::blessed $data) ? '' : ref $data;
+
+ return 'SCALAR' unless $ref;
+ my $n_steps = 1;
+ while ($ref eq 'REF') {
+ $data = $$data;
+ $ref = (Scalar::Util::blessed $data) ? '' : ref $data;
+ $n_steps++ if $ref;
+ }
+ return ($ref||'SCALAR') . ('REF' x $n_steps);
+}
sub _try_refkind {
my ($self, $data) = @_;
my @try = ($self->_refkind($data));
push @try, 'SCALAR_or_UNDEF' if $try[0] eq 'SCALAR' || $try[0] eq 'UNDEF';
push @try, 'FALLBACK';
- return @try;
+ return \@try;
}
sub _METHOD_FOR_refkind {
my ($self, $meth_prefix, $data) = @_;
- my $method = first {$_} map {$self->can($meth_prefix."_".$_)}
- $self->_try_refkind($data)
- or puke "cannot dispatch on '$meth_prefix' for ".$self->_refkind($data);
- return $method;
+
+ my $method;
+ for (@{$self->_try_refkind($data)}) {
+ $method = $self->can($meth_prefix."_".$_)
+ and last;
+ }
+
+ return $method || puke "cannot dispatch on '$meth_prefix' for ".$self->_refkind($data);
}
sub _SWITCH_refkind {
my ($self, $data, $dispatch_table) = @_;
- my $coderef = first {$_} map {$dispatch_table->{$_}}
- $self->_try_refkind($data)
- or puke "no dispatch entry for ".$self->_refkind($data);
+ my $coderef;
+ for (@{$self->_try_refkind($data)}) {
+ $coderef = $dispatch_table->{$_}
+ and last;
+ }
+
+ puke "no dispatch entry for ".$self->_refkind($data)
+ unless $coderef;
+
$coderef->();
}
foreach my $k ( sort keys %$data ) {
my $v = $data->{$k};
$self->_SWITCH_refkind($v, {
- ARRAYREF => sub {
+ ARRAYREF => sub {
if ($self->{array_datatypes}) { # array datatype
push @all_bind, $self->_bindtype($k, $v);
}
} elsif ($r eq 'SCALAR') {
# literal SQL without bind
push @sqlq, "$label = $$v";
- } else {
+ } else {
push @sqlq, "$label = ?";
push @sqlv, $self->_bindtype($k, $v);
}
} elsif ($r eq 'SCALAR') { # literal SQL without bind
# embedded literal SQL
push @sqlq, $$v;
- } else {
+ } else {
push @sqlq, '?';
push @sqlv, $v;
}
my $sql = SQL::Abstract->new;
- my($stmt, @bind) = $sql->select($table, \@fields, \%where, \@order);
+ my($stmt, @bind) = $sql->select($source, \@fields, \%where, \@order);
my($stmt, @bind) = $sql->insert($table, \%fieldvals || \@values);
If your database has array types (like for example Postgres),
activate the special option C<< array_datatypes => 1 >>
-when creating the C<SQL::Abstract> object.
+when creating the C<SQL::Abstract> object.
Then you may use an arrayref to insert and update database array types:
my $sql = SQL::Abstract->new(array_datatypes => 1);
my %data = (
planets => [qw/Mercury Venus Earth Mars/]
);
-
+
my($stmt, @bind) = $sql->insert('solar_system', \%data);
This results in:
my %data = (
name => 'Bill',
date_entered => \["to_date(?,'MM/DD/YYYY')", "03/02/2003"],
- );
+ );
The first value in the array is the actual SQL. Any other values are
optional and would be included in the bind values array. This gives
my($stmt, @bind) = $sql->insert('people', \%data);
- $stmt = "INSERT INTO people (name, date_entered)
+ $stmt = "INSERT INTO people (name, date_entered)
VALUES (?, to_date(?,'MM/DD/YYYY'))";
@bind = ('Bill', '03/02/2003');
The functions are simple. There's one for each major SQL operation,
and a constructor you use first. The arguments are specified in a
-similar order to each function (table, then fields, then a where
+similar order to each function (table, then fields, then a where
clause) to try and simplify things.
WHERE name like 'nwiger' AND email like 'nate@wiger.org'
-You can also override the comparsion on an individual basis - see
+You can also override the comparison on an individual basis - see
the huge section on L</"WHERE CLAUSES"> at the bottom.
=item sqltrue, sqlfalse
Expressions for inserting boolean values within SQL statements.
-By default these are C<1=1> and C<1=0>.
+By default these are C<1=1> and C<1=0>. They are used
+by the special operators C<-in> and C<-not_in> for generating
+correct SQL even when the argument is an empty array (see below).
=item logic
This determines the default logical operator for multiple WHERE
-statements in arrays. By default it is "or", meaning that a WHERE
+statements in arrays or hashes. If absent, the default logic is "or"
+for arrays, and "and" for hashes. This means that a WHERE
array of the form:
@where = (
- event_date => {'>=', '2/13/99'},
- event_date => {'<=', '4/24/03'},
+ event_date => {'>=', '2/13/99'},
+ event_date => {'<=', '4/24/03'},
);
-Will generate SQL like this:
+will generate SQL like this:
WHERE event_date >= '2/13/99' OR event_date <= '4/24/03'
WHERE event_date >= '2/13/99' AND event_date <= '4/24/03'
The logic can also be changed locally by inserting
-an extra first element in the array :
+a modifier in front of an arrayref :
- @where = (-and => event_date => {'>=', '2/13/99'},
- event_date => {'<=', '4/24/03'} );
+ @where = (-and => [event_date => {'>=', '2/13/99'},
+ event_date => {'<=', '4/24/03'} ]);
See the L</"WHERE CLAUSES"> section for explanations.
=item quote_char
This is the character that a table or column name will be quoted
-with. By default this is an empty string, but you could set it to
+with. By default this is an empty string, but you could set it to
the character C<`>, to generate SQL like this:
SELECT `a_field` FROM `a_table` WHERE `some_field` LIKE '%someval%'
SELECT [a_field] FROM [a_table] WHERE [some_field] LIKE '%someval%'
-Quoting is useful if you have tables or columns names that are reserved
+Quoting is useful if you have tables or columns names that are reserved
words in your database's SQL dialect.
=item name_sep
SELECT `table`.`one_field` FROM `table` WHERE `table`.`other_field` = 1
+=item injection_guard
+
+A regular expression C<qr/.../> that is applied to any C<-function> and unquoted
+column name specified in a query structure. This is a safety mechanism to avoid
+injection attacks when mishandling user input e.g.:
+
+ my %condition_as_column_value_pairs = get_values_from_user();
+ $sqla->select( ... , \%condition_as_column_value_pairs );
+
+If the expression matches an exception is thrown. Note that literal SQL
+supplied via C<\'...'> or C<\['...']> is B<not> checked in any way.
+
+Defaults to checking for C<;> and the C<GO> keyword (TransactSQL)
+
=item array_datatypes
-When this option is true, arrayrefs in INSERT or UPDATE are
-interpreted as array datatypes and are passed directly
+When this option is true, arrayrefs in INSERT or UPDATE are
+interpreted as array datatypes and are passed directly
to the DBI layer.
When this option is false, arrayrefs are interpreted
as literal SQL, just like refs to arrayrefs
=item special_ops
-Takes a reference to a list of "special operators"
+Takes a reference to a list of "special operators"
to extend the syntax understood by L<SQL::Abstract>.
See section L</"SPECIAL OPERATORS"> for details.
+=item unary_ops
+
+Takes a reference to a list of "unary operators"
+to extend the syntax understood by L<SQL::Abstract>.
+See section L</"UNARY OPERATORS"> for details.
+
=back
-=head2 insert($table, \@values || \%fieldvals)
+=head2 insert($table, \@values || \%fieldvals, \%options)
This is the simplest function. You simply give it a table name
and either an arrayref of values or hashref of field/value pairs.
L</"Inserting and Updating SQL"> for information on how to insert
with those data types.
+The optional C<\%options> hash reference may contain additional
+options to generate the insert SQL. Currently supported options
+are:
+
+=over 4
+
+=item returning
+
+Takes either a scalar of raw SQL fields, or an array reference of
+field names, and adds on an SQL C<RETURNING> statement at the end.
+This allows you to return data generated by the insert statement
+(such as row IDs) without performing another C<SELECT> statement.
+Note, however, this is not part of the SQL standard and may not
+be supported by all database engines.
+
+=back
+
=head2 update($table, \%fieldvals, \%where)
This takes a table, hashref of field/value pairs, and an optional
=head2 select($source, $fields, $where, $order)
-This returns a SQL SELECT statement and associated list of bind values, as
+This returns a SQL SELECT statement and associated list of bind values, as
specified by the arguments :
=over
=item $source
-Specification of the 'FROM' part of the statement.
+Specification of the 'FROM' part of the statement.
The argument can be either a plain scalar (interpreted as a table
name, will be quoted), or an arrayref (interpreted as a list
of table names, joined by commas, quoted), or a scalarref
=item $fields
-Specification of the list of fields to retrieve from
+Specification of the list of fields to retrieve from
the source.
The argument can be either an arrayref (interpreted as a list
-of field names, will be joined by commas and quoted), or a
+of field names, will be joined by commas and quoted), or a
plain scalar (literal SQL, not quoted).
-Please observe that this API is not as flexible as for
-the first argument C<$table>, for backwards compatibility reasons.
+Please observe that this API is not as flexible as that of
+the first argument C<$source>, for backwards compatibility reasons.
=item $where
Optional argument to specify the WHERE part of the query.
The argument is most often a hashref, but can also be
-an arrayref or plain scalar --
+an arrayref or plain scalar --
see section L<WHERE clause|/"WHERE CLAUSES"> for details.
=item $order
Optional argument to specify the ORDER BY part of the query.
-The argument can be a scalar, a hashref or an arrayref
+The argument can be a scalar, a hashref or an arrayref
-- see section L<ORDER BY clause|/"ORDER BY CLAUSES">
for details.
You get the idea. Strings get their case twiddled, but everything
else remains verbatim.
-
-
-
=head1 WHERE CLAUSES
=head2 Introduction
);
This simple code will create the following:
-
+
$stmt = "WHERE user = ? AND ( status = ? OR status = ? OR status = ? )";
@bind = ('nwiger', 'assigned', 'in-progress', 'pending');
-An empty arrayref will be considered a logical false and
-will generate 0=1.
+A field associated to an empty arrayref will be considered a
+logical false and will generate 0=1.
-=head2 Key-value pairs
+=head2 Tests for NULL values
+
+If the value part is C<undef> then this is converted to SQL <IS NULL>
+
+ my %where = (
+ user => 'nwiger',
+ status => undef,
+ );
+
+becomes:
+
+ $stmt = "WHERE user = ? AND status IS NULL";
+ @bind = ('nwiger');
+
+To test if a column IS NOT NULL:
+
+ my %where = (
+ user => 'nwiger',
+ status => { '!=', undef },
+ );
+
+=head2 Specific comparison operators
If you want to specify a different type of operator for your comparison,
you can use a hashref for a given column:
To test against multiple values, just enclose the values in an arrayref:
- status => { '!=', ['assigned', 'in-progress', 'pending'] };
-
-Which would give you:
-
- "WHERE status != ? AND status != ? AND status != ?"
-
-Notice that since the operator was recognized as being a 'negative'
-operator, the arrayref was interpreted with 'AND' logic (because
-of Morgan's laws). By contrast, the reverse
-
status => { '=', ['assigned', 'in-progress', 'pending'] };
-would generate :
+Which would give you:
"WHERE status = ? OR status = ? OR status = ?"
my %where => (
user => 'nwiger',
- priority => [ {'=', 2}, {'!=', 1} ]
+ priority => [ { '=', 2 }, { '>', 5 } ]
);
Which would generate:
- $stmt = "WHERE user = ? AND priority = ? OR priority != ?";
- @bind = ('nwiger', '2', '1');
+ $stmt = "WHERE ( priority = ? OR priority > ? ) AND user = ?";
+ @bind = ('2', '5', 'nwiger');
If you want to include literal SQL (with or without bind values), just use a
scalar reference or array reference as the value:
As the second C<!=> key will obliterate the first. The solution
is to use the special C<-modifier> form inside an arrayref:
- priority => [ -and => {'!=', 2},
+ priority => [ -and => {'!=', 2},
{'!=', 1} ]
status => [ -or => {'=', 'assigned'}, {'=', 'in-progress'}]
status => [ {'=', 'assigned'}, {'=', 'in-progress'} ]
-In addition to C<-and> and C<-or>, there is also a special C<-nest>
-operator which adds an additional set of parens, to create a subquery.
-For example, to get something like this:
-
- $stmt = "WHERE user = ? AND ( workhrs > ? OR geo = ? )";
- @bind = ('nwiger', '20', 'ASIA');
-
-You would do:
-
- my %where = (
- user => 'nwiger',
- -nest => [ workhrs => {'>', 20}, geo => 'ASIA' ],
- );
-
-If you need several nested subexpressions, you can number
-the C<-nest> branches :
-
- my %where = (
- user => 'nwiger',
- -nest1 => ...,
- -nest2 => ...,
- ...
- );
=head2 Special operators : IN, BETWEEN, etc.
$stmt = "WHERE status = ? AND reportid IN (?,?,?)";
@bind = ('completed', '567', '2335', '2');
-The reverse operator C<-not_in> generates SQL C<NOT IN> and is used in
+The reverse operator C<-not_in> generates SQL C<NOT IN> and is used in
the same way.
-Another pair of operators is C<-between> and C<-not_between>,
+If the argument to C<-in> is an empty array, 'sqlfalse' is generated
+(by default : C<1=0>). Similarly, C<< -not_in => [] >> generates
+'sqltrue' (by default : C<1=1>).
+
+In addition to the array you can supply a chunk of literal sql or
+literal sql with bind:
+
+ my %where = {
+ customer => { -in => \[
+ 'SELECT cust_id FROM cust WHERE balance > ?',
+ 2000,
+ ],
+ status => { -in => \'SELECT status_codes FROM states' },
+ };
+
+would generate:
+
+ $stmt = "WHERE (
+ customer IN ( SELECT cust_id FROM cust WHERE balance > ? )
+ AND status IN ( SELECT status_codes FROM states )
+ )";
+ @bind = ('2000');
+
+Finally, if the argument to C<-in> is not a reference, it will be
+treated as a single-element array.
+
+Another pair of operators is C<-between> and C<-not_between>,
used with an arrayref of two values:
my %where = (
WHERE user = ? AND completion_date NOT BETWEEN ( ? AND ? )
-These are the two builtin "special operators"; but the
+Just like with C<-in> all plausible combinations of literal SQL
+are possible:
+
+ my %where = {
+ start0 => { -between => [ 1, 2 ] },
+ start1 => { -between => \["? AND ?", 1, 2] },
+ start2 => { -between => \"lower(x) AND upper(y)" },
+ start3 => { -between => [
+ \"lower(x)",
+ \["upper(?)", 'stuff' ],
+ ] },
+ };
+
+Would give you:
+
+ $stmt = "WHERE (
+ ( start0 BETWEEN ? AND ? )
+ AND ( start1 BETWEEN ? AND ? )
+ AND ( start2 BETWEEN lower(x) AND upper(y) )
+ AND ( start3 BETWEEN lower(x) AND upper(?) )
+ )";
+ @bind = (1, 2, 1, 2, 'stuff');
+
+
+These are the two builtin "special operators"; but the
list can be expanded : see section L</"SPECIAL OPERATORS"> below.
-=head2 Nested conditions
+=head2 Unary operators: bool
+
+If you wish to test against boolean columns or functions within your
+database you can use the C<-bool> and C<-not_bool> operators. For
+example to test the column C<is_user> being true and the column
+C<is_enabled> being false you would use:-
+
+ my %where = (
+ -bool => 'is_user',
+ -not_bool => 'is_enabled',
+ );
+
+Would give you:
+
+ WHERE is_user AND NOT is_enabled
+
+If a more complex combination is required, testing more conditions,
+then you should use the and/or operators:-
+
+ my %where = (
+ -and => [
+ -bool => 'one',
+ -bool => 'two',
+ -bool => 'three',
+ -not_bool => 'four',
+ ],
+ );
+
+Would give you:
+
+ WHERE one AND two AND three AND NOT four
+
+
+=head2 Nested conditions, -and/-or prefixes
So far, we've seen how multiple conditions are joined with a top-level
C<AND>. We can change this by putting the different conditions we want in
OR ( user = ? AND status = ? ) )";
@bind = ('nwiger', 'pending', 'dispatched', 'robot', 'unassigned');
-This can be combined with the C<-nest> operator to properly group
-SQL statements:
+
+Clauses in hashrefs or arrayrefs can be prefixed with an C<-and> or C<-or>
+to change the logic inside :
my @where = (
-and => [
user => 'nwiger',
- -nest => [
- ["-and", workhrs => {'>', 20}, geo => 'ASIA' ],
- ["-and", workhrs => {'<', 50}, geo => 'EURO' ]
+ [
+ -and => [ workhrs => {'>', 20}, geo => 'ASIA' ],
+ -or => { workhrs => {'<', 50}, geo => 'EURO' },
],
],
);
That would yield:
- WHERE ( user = ? AND
- ( ( workhrs > ? AND geo = ? )
- OR ( workhrs < ? AND geo = ? ) ) )
+ WHERE ( user = ? AND (
+ ( workhrs > ? AND geo = ? )
+ OR ( workhrs < ? OR geo = ? )
+ ) )
+
+=head3 Algebraic inconsistency, for historical reasons
+
+C<Important note>: when connecting several conditions, the C<-and->|C<-or>
+operator goes C<outside> of the nested structure; whereas when connecting
+several constraints on one column, the C<-and> operator goes
+C<inside> the arrayref. Here is an example combining both features :
+
+ my @where = (
+ -and => [a => 1, b => 2],
+ -or => [c => 3, d => 4],
+ e => [-and => {-like => 'foo%'}, {-like => '%bar'} ]
+ )
-=head2 Literal SQL
+yielding
-Finally, sometimes only literal SQL will do. If you want to include
-literal SQL verbatim, you can specify it as a scalar reference, namely:
+ WHERE ( ( ( a = ? AND b = ? )
+ OR ( c = ? OR d = ? )
+ OR ( e LIKE ? AND e LIKE ? ) ) )
+
+This difference in syntax is unfortunate but must be preserved for
+historical reasons. So be careful : the two examples below would
+seem algebraically equivalent, but they are not
+
+ {col => [-and => {-like => 'foo%'}, {-like => '%bar'}]}
+ # yields : WHERE ( ( col LIKE ? AND col LIKE ? ) )
+
+ [-and => {col => {-like => 'foo%'}, {col => {-like => '%bar'}}]]
+ # yields : WHERE ( ( col LIKE ? OR col LIKE ? ) )
+
+
+=head2 Literal SQL and value type operators
+
+The basic premise of SQL::Abstract is that in WHERE specifications the "left
+side" is a column name and the "right side" is a value (normally rendered as
+a placeholder). This holds true for both hashrefs and arrayref pairs as you
+see in the L</WHERE CLAUSES> examples above. Sometimes it is necessary to
+alter this behavior. There are several ways of doing so.
+
+=head3 -ident
+
+This is a virtual operator that signals the string to its right side is an
+identifier (a column name) and not a value. For example to compare two
+columns you would write:
- my $inn = 'is Not Null';
my %where = (
priority => { '<', 2 },
- requestor => \$inn
+ requestor => { -ident => 'submitter' },
);
-This would create:
+which creates:
- $stmt = "WHERE priority < ? AND requestor is Not Null";
+ $stmt = "WHERE priority < ? AND requestor = submitter";
@bind = ('2');
-Note that in this example, you only get one bind parameter back, since
-the verbatim SQL is passed as part of the statement.
+If you are maintaining legacy code you may see a different construct as
+described in L</Deprecated usage of Literal SQL>, please use C<-ident> in new
+code.
+
+=head3 -value
-Of course, just to prove a point, the above can also be accomplished
-with this:
+This is a virtual operator that signals that the construct to its right side
+is a value to be passed to DBI. This is for example necessary when you want
+to write a where clause against an array (for RDBMS that support such
+datatypes). For example:
my %where = (
- priority => { '<', 2 },
- requestor => { '!=', undef },
+ array => { -value => [1, 2, 3] }
);
+will result in:
-TMTOWTDI.
+ $stmt = 'WHERE array = ?';
+ @bind = ([1, 2, 3]);
-Conditions on boolean columns can be expressed in the
-same way, passing a reference to an empty string :
+Note that if you were to simply say:
my %where = (
- priority => { '<', 2 },
- is_ready => \"";
+ array => [1, 2, 3]
);
-which yields
+the result would probably not be what you wanted:
- $stmt = "WHERE priority < ? AND is_ready";
- @bind = ('2');
+ $stmt = 'WHERE array = ? OR array = ? OR array = ?';
+ @bind = (1, 2, 3);
+
+=head3 Literal SQL
+
+Finally, sometimes only literal SQL will do. To include a random snippet
+of SQL verbatim, you specify it as a scalar reference. Consider this only
+as a last resort. Usually there is a better way. For example:
+
+ my %where = (
+ priority => { '<', 2 },
+ requestor => { -in => \'(SELECT name FROM hitmen)' },
+ );
+Would create:
-=head2 Literal SQL with placeholders and bind values (subqueries)
+ $stmt = "WHERE priority < ? AND requestor IN (SELECT name FROM hitmen)"
+ @bind = (2);
+
+Note that in this example, you only get one bind parameter back, since
+the verbatim SQL is passed as part of the statement.
+
+=head4 CAVEAT
+
+ Never use untrusted input as a literal SQL argument - this is a massive
+ security risk (there is no way to check literal snippets for SQL
+ injections and other nastyness). If you need to deal with untrusted input
+ use literal SQL with placeholders as described next.
+
+=head3 Literal SQL with placeholders and bind values (subqueries)
If the literal SQL to be inserted has placeholders and bind values,
use a reference to an arrayref (yes this is a double reference --
@bind = ('10');
Note that you must pass the bind values in the same format as they are returned
-by C</where>. That means that if you set L</bindtype> to C<columns>, you must
+by L</where>. That means that if you set L</bindtype> to C<columns>, you must
provide the bind values in the C<< [ column_meta => value ] >> format, where
C<column_meta> is an opaque scalar value; most commonly the column name, but
-you can use any scalar scalar value (including references and blessed
-references), L<SQL::Abstract> will simply pass it through intact. So eg. the
-above example will look like:
+you can use any scalar value (including references and blessed references),
+L<SQL::Abstract> will simply pass it through intact. So if C<bindtype> is set
+to C<columns> the above example will look like:
my %where = (
date_column => \[q/= date '2008-09-30' - ?::integer/, [ dummy => 10 ]/]
This yields :
- $stmt = "WHERE (foo = ? AND bar IN (SELECT c1 FROM t1
+ $stmt = "WHERE (foo = ? AND bar IN (SELECT c1 FROM t1
WHERE c2 < ? AND c3 LIKE ?))";
@bind = (1234, 100, "foo%");
-Other subquery operators, like for example C<"E<gt> ALL"> or C<"NOT IN">,
+Other subquery operators, like for example C<"E<gt> ALL"> or C<"NOT IN">,
are expressed in the same way. Of course the C<$sub_stmt> and
-its associated bind values can be generated through a former call
+its associated bind values can be generated through a former call
to C<select()> :
my ($sub_stmt, @sub_bind)
- = $sql->select("t1", "c1", {c2 => {"<" => 100},
+ = $sql->select("t1", "c1", {c2 => {"<" => 100},
c3 => {-like => "foo%"}});
my %where = (
foo => 1234,
);
In the examples above, the subquery was used as an operator on a column;
-but the same principle also applies for a clause within the main C<%where>
+but the same principle also applies for a clause within the main C<%where>
hash, like an EXISTS subquery :
- my ($sub_stmt, @sub_bind)
+ my ($sub_stmt, @sub_bind)
= $sql->select("t1", "*", {c1 => 1, c2 => \"> t0.c0"});
- my %where = (
+ my %where = ( -and => [
foo => 1234,
- -nest => \["EXISTS ($sub_stmt)" => @sub_bind],
- );
+ \["EXISTS ($sub_stmt)" => @sub_bind],
+ ]);
which yields
- $stmt = "WHERE (foo = ? AND EXISTS (SELECT * FROM t1
+ $stmt = "WHERE (foo = ? AND EXISTS (SELECT * FROM t1
WHERE c1 = ? AND c2 > t0.c0))";
@bind = (1234, 1);
-Observe that the condition on C<c2> in the subquery refers to
-column C<t0.c0> of the main query : this is I<not> a bind
-value, so we have to express it through a scalar ref.
+Observe that the condition on C<c2> in the subquery refers to
+column C<t0.c0> of the main query : this is I<not> a bind
+value, so we have to express it through a scalar ref.
Writing C<< c2 => {">" => "t0.c0"} >> would have generated
C<< c2 > ? >> with bind value C<"t0.c0"> ... not exactly
what we wanted here.
-Another use of the subquery technique is when some SQL clauses need
-parentheses, as it often occurs with some proprietary SQL extensions
-like for example fulltext expressions, geospatial expressions,
-NATIVE clauses, etc. Here is an example of a fulltext query in MySQL :
-
- my %where = (
- -nest => \["MATCH (col1, col2) AGAINST (?)" => qw/apples/]
- );
-
Finally, here is an example where a subquery is used
for expressing unary negation:
- my ($sub_stmt, @sub_bind)
+ my ($sub_stmt, @sub_bind)
= $sql->where({age => [{"<" => 10}, {">" => 20}]});
$sub_stmt =~ s/^ where //i; # don't want "WHERE" in the subclause
my %where = (
lname => {like => '%son%'},
- -nest => \["NOT ($sub_stmt)" => @sub_bind],
+ \["NOT ($sub_stmt)" => @sub_bind],
);
This yields
$stmt = "lname LIKE ? AND NOT ( age < ? OR age > ? )"
@bind = ('%son%', 10, 20)
+=head3 Deprecated usage of Literal SQL
+
+Below are some examples of archaic use of literal SQL. It is shown only as
+reference for those who deal with legacy code. Each example has a much
+better, cleaner and safer alternative that users should opt for in new code.
+
+=over
+
+=item *
+ my %where = ( requestor => \'IS NOT NULL' )
+
+ $stmt = "WHERE requestor IS NOT NULL"
+
+This used to be the way of generating NULL comparisons, before the handling
+of C<undef> got formalized. For new code please use the superior syntax as
+described in L</Tests for NULL values>.
+
+=item *
+
+ my %where = ( requestor => \'= submitter' )
+
+ $stmt = "WHERE requestor = submitter"
+
+This used to be the only way to compare columns. Use the superior L</-ident>
+method for all new code. For example an identifier declared in such a way
+will be properly quoted if L</quote_char> is properly set, while the legacy
+form will remain as supplied.
+
+=item *
+
+ my %where = ( is_ready => \"", completed => { '>', '2012-12-21' } )
+
+ $stmt = "WHERE completed > ? AND is_ready"
+ @bind = ('2012-12-21')
+
+Using an empty string literal used to be the only way to express a boolean.
+For all new code please use the much more readable
+L<-bool|/Unary operators: bool> operator.
+
+=back
=head2 Conclusion
dynamically-generating SQL and could just hardwire it into your
script.
-
-
-
=head1 ORDER BY CLAUSES
-Some functions take an order by clause. This can either be a scalar (just a
+Some functions take an order by clause. This can either be a scalar (just a
column name,) a hash of C<< { -desc => 'col' } >> or C<< { -asc => 'col' } >>,
or an array of either of the two previous forms. Examples:
- Given | Will Generate
+ Given | Will Generate
----------------------------------------------------------
- \'colA DESC' | ORDER BY colA DESC
- 'colA' | ORDER BY colA
- [qw/colA colB/] | ORDER BY colA, colB
- {-asc => 'colA'} | ORDER BY colA ASC
- {-desc => 'colB'} | ORDER BY colB DESC
- [ |
- {-asc => 'colA'}, | ORDER BY colA ASC, colB DESC
- {-desc => 'colB'} |
- ] |
- [colA => {-asc => 'colB'}] | ORDER BY colA, colB ASC
- ==========================================================
+ |
+ \'colA DESC' | ORDER BY colA DESC
+ |
+ 'colA' | ORDER BY colA
+ |
+ [qw/colA colB/] | ORDER BY colA, colB
+ |
+ {-asc => 'colA'} | ORDER BY colA ASC
+ |
+ {-desc => 'colB'} | ORDER BY colB DESC
+ |
+ ['colA', {-asc => 'colB'}] | ORDER BY colA, colB ASC
+ |
+ { -asc => [qw/colA colB/] } | ORDER BY colA ASC, colB ASC
+ |
+ [ |
+ { -asc => 'colA' }, | ORDER BY colA ASC, colB DESC,
+ { -desc => [qw/colB/], | colC ASC, colD ASC
+ { -asc => [qw/colC colD/],|
+ ] |
+ ===========================================================
=head1 SPECIAL OPERATORS
my $sqlmaker = SQL::Abstract->new(special_ops => [
- {regex => qr/.../,
+ {
+ regex => qr/.../,
handler => sub {
my ($self, $field, $op, $arg) = @_;
...
- },
+ },
+ },
+ {
+ regex => qr/.../,
+ handler => 'method_name',
},
]);
-A "special operator" is a SQL syntactic clause that can be
+A "special operator" is a SQL syntactic clause that can be
applied to a field, instead of a usual binary operator.
-For example :
+For example :
WHERE field IN (?, ?, ?)
WHERE field BETWEEN ? AND ?
WHERE MATCH(field) AGAINST (?, ?)
Special operators IN and BETWEEN are fairly standard and therefore
-are builtin within C<SQL::Abstract>. For other operators,
-like the MATCH .. AGAINST example above which is
-specific to MySQL, you can write your own operator handlers :
-supply a C<special_ops> argument to the C<new> method.
-That argument takes an arrayref of operator definitions;
-each operator definition is a hashref with two entries
+are builtin within C<SQL::Abstract> (as the overridable methods
+C<_where_field_IN> and C<_where_field_BETWEEN>). For other operators,
+like the MATCH .. AGAINST example above which is specific to MySQL,
+you can write your own operator handlers - supply a C<special_ops>
+argument to the C<new> method. That argument takes an arrayref of
+operator definitions; each operator definition is a hashref with two
+entries:
=over
=item handler
-coderef that will be called when meeting that operator
-in the input tree. The coderef will be called with
-arguments C<< ($self, $field, $op, $arg) >>, and
-should return a C<< ($sql, @bind) >> structure.
+Either a coderef or a plain scalar method name. In both cases
+the expected return is C<< ($sql, @bind) >>.
+
+When supplied with a method name, it is simply called on the
+L<SQL::Abstract/> object as:
+
+ $self->$method_name ($field, $op, $arg)
+
+ Where:
+
+ $op is the part that matched the handler regex
+ $field is the LHS of the operator
+ $arg is the RHS
+
+When supplied with a coderef, it is called as:
+
+ $coderef->($self, $field, $op, $arg)
+
=back
-For example, here is an implementation
+For example, here is an implementation
of the MATCH .. AGAINST syntax for MySQL
my $sqlmaker = SQL::Abstract->new(special_ops => [
-
+
# special op for MySql MATCH (field) AGAINST(word1, word2, ...)
- {regex => qr/^match$/i,
+ {regex => qr/^match$/i,
handler => sub {
my ($self, $field, $op, $arg) = @_;
$arg = [$arg] if not ref $arg;
return ($sql, @bind);
}
},
-
+
]);
+=head1 UNARY OPERATORS
+
+ my $sqlmaker = SQL::Abstract->new(unary_ops => [
+ {
+ regex => qr/.../,
+ handler => sub {
+ my ($self, $op, $arg) = @_;
+ ...
+ },
+ },
+ {
+ regex => qr/.../,
+ handler => 'method_name',
+ },
+ ]);
+
+A "unary operator" is a SQL syntactic clause that can be
+applied to a field - the operator goes before the field
+
+You can write your own operator handlers - supply a C<unary_ops>
+argument to the C<new> method. That argument takes an arrayref of
+operator definitions; each operator definition is a hashref with two
+entries:
+
+=over
+
+=item regex
+
+the regular expression to match the operator
+
+=item handler
+
+Either a coderef or a plain scalar method name. In both cases
+the expected return is C<< $sql >>.
+
+When supplied with a method name, it is simply called on the
+L<SQL::Abstract/> object as:
+
+ $self->$method_name ($op, $arg)
+
+ Where:
+
+ $op is the part that matched the handler regex
+ $arg is the RHS or argument of the operator
+
+When supplied with a coderef, it is called as:
+
+ $coderef->($self, $op, $arg)
+
+
+=back
+
+
=head1 PERFORMANCE
Thanks to some benchmarking by Mark Stosberg, it turns out that
around. On subsequent queries, simply use the C<values> function provided
by this module to return your values in the correct order.
+However this depends on the values having the same type - if, for
+example, the values of a where clause may either have values
+(resulting in sql of the form C<column = ?> with a single bind
+value), or alternatively the values might be C<undef> (resulting in
+sql of the form C<column IS NULL> with no bind value) then the
+caching technique suggested will not work.
=head1 FORMBUILDER
table, the actual query script can be extremely simplistic.
If you're B<REALLY> lazy (I am), check out C<HTML::QuickTable> for
-a fast interface to returning and formatting data. I frequently
+a fast interface to returning and formatting data. I frequently
use these three modules together to write complex database query
apps in under 50 lines.
+=head1 REPO
+
+=over
+
+=item * gitweb: L<http://git.shadowcat.co.uk/gitweb/gitweb.cgi?p=dbsrgits/SQL-Abstract.git>
+
+=item * git: L<git://git.shadowcat.co.uk/dbsrgits/SQL-Abstract.git>
+
+=back
=head1 CHANGES
Version 1.50 was a major internal refactoring of C<SQL::Abstract>.
Great care has been taken to preserve the I<published> behavior
documented in previous versions in the 1.* family; however,
-some features that were previously undocumented, or behaved
+some features that were previously undocumented, or behaved
differently from the documentation, had to be changed in order
to clarify the semantics. Hence, client code that was relying
-on some dark areas of C<SQL::Abstract> v1.*
+on some dark areas of C<SQL::Abstract> v1.*
B<might behave differently> in v1.50.
The main changes are :
=over
-=item *
+=item *
support for literal SQL through the C<< \ [$sql, bind] >> syntax.
=item *
-added -nest1, -nest2 or -nest_1, -nest_2, ...
-
-=item *
-
optional support for L<array datatypes|/"Inserting and Updating Arrays">
-=item *
+=item *
defensive programming : check arguments
=item *
fixed bug with global logic, which was previously implemented
-through global variables yielding side-effects. Prior versons would
+through global variables yielding side-effects. Prior versions would
interpret C<< [ {cond1, cond2}, [cond3, cond4] ] >>
as C<< "(cond1 AND cond2) OR (cond3 AND cond4)" >>.
Now this is interpreted
as C<< "(cond1 AND cond2) OR (cond3 OR cond4)" >>.
-=item *
-
-C<-and> / C<-or> operators are no longer accepted
-in the middle of an arrayref : they are
-only admitted if in first position.
-
-=item *
-
-changed logic for distributing an op over arrayrefs
=item *
fixed semantics of _bindtype on array args
-=item *
+=item *
dropped the C<_anoncopy> of the %where tree. No longer necessary,
we just avoid shifting arrays within that tree.
=back
-
-
=head1 ACKNOWLEDGEMENTS
There are a number of individuals that have really helped out with
this module. Unfortunately, most of them submitted bugs via CPAN
so I have no idea who they are! But the people I do know are:
- Ash Berlin (order_by hash term support)
+ Ash Berlin (order_by hash term support)
Matt Trout (DBIx::Class support)
Mark Stosberg (benchmarking)
Chas Owens (initial "IN" operator support)
Mike Fragassi (enhancements to "BETWEEN" and "LIKE")
Dan Kubb (support for "quote_char" and "name_sep")
Guillermo Roditi (patch to cleanup "IN" and "BETWEEN", fix and tests for _order_by)
- Laurent Dami (internal refactoring, multiple -nest, extensible list of special operators, literal SQL)
+ Laurent Dami (internal refactoring, extensible list of special operators, literal SQL)
Norbert Buchmuller (support for literal SQL in hashpair, misc. fixes & tests)
+ Peter Rabbitson (rewrite of SQLA::Test, misc. fixes & tests)
+ Oliver Charles (support for "RETURNING" after "INSERT")
Thanks!
C<SQL::Abstract>, and as such list members there are very familiar with
how to create queries.
-This module is free software; you may copy this under the terms of
-the GNU General Public License, or the Artistic License, copies of
-which should have accompanied your Perl kit.
+=head1 LICENSE
+
+This module is free software; you may copy this under the same
+terms as perl itself (either the GNU General Public License or
+the Artistic License)
=cut