package Pod::Parser;
use vars qw($VERSION);
-$VERSION = 1.13; ## Current version of this package
+$VERSION = 1.32; ## Current version of this package
require 5.005; ## requires this Perl version or later
#############################################################################
A I<parse-option> is simply a named option of B<Pod::Parser> with a
value that corresponds to a certain specified behavior. These various
-behaviors of B<Pod::Parser> may be enabled/disabled by setting or
+behaviors of B<Pod::Parser> may be enabled/disabled by setting
or unsetting one or more I<parse-options> using the B<parseopts()> method.
The set of currently accepted parse-options is as follows:
This method is useful if you need to perform your own interpolation
of interior sequences and can't rely upon B<interpolate> to expand
-them in simple bottom-up order order.
+them in simple bottom-up order.
The parameter C<$text> is a string or block of text to be parsed
for interior sequences; and the parameter C<$line_num> is the
## Look for the beginning of a sequence
if ( /^([A-Z])(<(?:<+\s)?)$/ ) {
## Push a new sequence onto the stack of those "in-progress"
- ($cmd, $ldelim) = ($1, $2);
+ my $ldelim_orig;
+ ($cmd, $ldelim_orig) = ($1, $2);
+ ($ldelim = $ldelim_orig) =~ s/\s+$//;
+ ($rdelim = $ldelim) =~ tr/</>/;
$seq = Pod::InteriorSequence->new(
-name => $cmd,
- -ldelim => $ldelim, -rdelim => '',
+ -ldelim => $ldelim_orig, -rdelim => $rdelim,
-file => $file, -line => $line
);
- $ldelim =~ s/\s+$//, ($rdelim = $ldelim) =~ tr/</>/;
(@seq_stack > 1) and $seq->nested($seq_stack[-1]);
push @seq_stack, $seq;
}
$seq_stack[-1]->append($expand_seq ? &$xseq_sub($self,$seq)
: $seq);
## Remember the current cmd-name and left-delimiter
- $cmd = (@seq_stack > 1) ? $seq_stack[-1]->name : '';
- $ldelim = (@seq_stack > 1) ? $seq_stack[-1]->ldelim : '';
- $ldelim =~ s/\s+$//, ($rdelim = $ldelim) =~ tr/</>/;
+ if(@seq_stack > 1) {
+ $cmd = $seq_stack[-1]->name;
+ $ldelim = $seq_stack[-1]->ldelim;
+ $rdelim = $seq_stack[-1]->rdelim;
+ } else {
+ $cmd = $ldelim = $rdelim = '';
+ }
}
}
elsif (length) {
while (defined ($textline = $tied_fh ? <$in_fh> : $in_fh->getline)) {
$textline = $self->preprocess_line($textline, ++$nlines);
next unless ((defined $textline) && (length $textline));
- $_ = $paragraph; ## save previous contents
if ((! length $paragraph) && ($textline =~ /^==/)) {
## '==' denotes a one-line command paragraph
STDERR filehandle is used for output (and no open or close is
performed). If no output filehandle is currently in use and no output
filename is specified, then "-" is implied.
+Alternatively, an L<IO::String> object is also accepted as an output
+file handle.
This method does I<not> usually need to be overridden by subclasses.
my $self = shift;
my %opts = (ref $_[0] eq 'HASH') ? %{ shift() } : ();
my ($infile, $outfile) = @_;
- my ($in_fh, $out_fh) = (gensym, gensym) if ($] < 5.6);
+ my ($in_fh, $out_fh) = (gensym(), gensym()) if ($] < 5.006);
my ($close_input, $close_output) = (0, 0);
local *myData = $self;
- local $_;
+ local *_;
## Is $infile a filename or a (possibly implied) filehandle
- $infile = '-' unless ((defined $infile) && (length $infile));
- if (($infile eq '-') || ($infile =~ /^<&(STDIN|0)$/i)) {
- ## Not a filename, just a string implying STDIN
- $myData{_INFILE} = "<standard input>";
- $in_fh = \*STDIN;
- }
- elsif (ref $infile) {
+ if (defined $infile && ref $infile) {
+ if (ref($infile) =~ /^(SCALAR|ARRAY|HASH|CODE|REF)$/) {
+ croak "Input from $1 reference not supported!\n";
+ }
## Must be a filehandle-ref (or else assume its a ref to an object
## that supports the common IO read operations).
$myData{_INFILE} = ${$infile};
$in_fh = $infile;
}
+ elsif (!defined($infile) || !length($infile) || ($infile eq '-')
+ || ($infile =~ /^<&(?:STDIN|0)$/i))
+ {
+ ## Not a filename, just a string implying STDIN
+ $infile ||= '-';
+ $myData{_INFILE} = "<standard input>";
+ $in_fh = \*STDIN;
+ }
else {
## We have a filename, open it for reading
$myData{_INFILE} = $infile;
## the entire document (but *not* if this is an included file). We
## determine this by seeing if the input stream stack has been set-up
## already
- ##
- unless ((defined $outfile) && (length $outfile)) {
- (defined $myData{_TOP_STREAM}) && ($out_fh = $myData{_OUTPUT})
- || ($outfile = '-');
- }
- ## Is $outfile a filename or a (possibly implied) filehandle
- if ((defined $outfile) && (length $outfile)) {
- if (($outfile eq '-') || ($outfile =~ /^>&?(?:STDOUT|1)$/i)) {
- ## Not a filename, just a string implying STDOUT
- $myData{_OUTFILE} = "<standard output>";
- $out_fh = \*STDOUT;
+
+ ## Is $outfile a filename, a (possibly implied) filehandle, maybe a ref?
+ if (ref $outfile) {
+ ## we need to check for ref() first, as other checks involve reading
+ if (ref($outfile) =~ /^(ARRAY|HASH|CODE)$/) {
+ croak "Output to $1 reference not supported!\n";
}
- elsif ($outfile =~ /^>&(STDERR|2)$/i) {
- ## Not a filename, just a string implying STDERR
- $myData{_OUTFILE} = "<standard error>";
- $out_fh = \*STDERR;
+ elsif (ref($outfile) eq 'SCALAR') {
+# # NOTE: IO::String isn't a part of the perl distribution,
+# # so probably we shouldn't support this case...
+# require IO::String;
+# $myData{_OUTFILE} = "$outfile";
+# $out_fh = IO::String->new($outfile);
+ croak "Output to SCALAR reference not supported!\n";
}
- elsif (ref $outfile) {
+ else {
## Must be a filehandle-ref (or else assume its a ref to an
## object that supports the common IO write operations).
$myData{_OUTFILE} = ${$outfile};
$out_fh = $outfile;
}
+ }
+ elsif (!defined($outfile) || !length($outfile) || ($outfile eq '-')
+ || ($outfile =~ /^>&?(?:STDOUT|1)$/i))
+ {
+ if (defined $myData{_TOP_STREAM}) {
+ $out_fh = $myData{_OUTPUT};
+ }
else {
- ## We have a filename, open it for writing
- $myData{_OUTFILE} = $outfile;
- (-d $outfile) and croak "$outfile is a directory, not POD input!\n";
- open($out_fh, "> $outfile") or
- croak "Can't open $outfile for writing: $!\n";
- $close_output = 1;
+ ## Not a filename, just a string implying STDOUT
+ $outfile ||= '-';
+ $myData{_OUTFILE} = "<standard output>";
+ $out_fh = \*STDOUT;
}
}
+ elsif ($outfile =~ /^>&(STDERR|2)$/i) {
+ ## Not a filename, just a string implying STDERR
+ $myData{_OUTFILE} = "<standard error>";
+ $out_fh = \*STDERR;
+ }
+ else {
+ ## We have a filename, open it for writing
+ $myData{_OUTFILE} = $outfile;
+ (-d $outfile) and croak "$outfile is a directory, not POD input!\n";
+ open($out_fh, "> $outfile") or
+ croak "Can't open $outfile for writing: $!\n";
+ $close_output = 1;
+ }
## Whew! That was a lot of work to set up reasonably/robust behavior
## in the case of a non-filename for reading and writing. Now we just
tree-based approach. Rather than doing everything in one pass and
calling the B<interpolate()> method to expand sequences into text, it
may be desirable to instead create a parse-tree using the B<parse_text()>
-method to return a tree-like structure which may contain an ordered list
+method to return a tree-like structure which may contain an ordered
list of children (each of which may be a text-string, or a similar
tree-like structure).
=head1 AUTHOR
+Please report bugs using L<http://rt.cpan.org>.
+
Brad Appleton E<lt>bradapp@enteract.comE<gt>
Based on code for B<Pod::Text> written by
=cut
1;
+# vim: ts=4 sw=4 et
projects / p5sagit/p5-mst-13.2.git / blobdiff