use IO::Select;
use Time::HiRes qw(time);
-use Object::Remote::Logging qw( :log :dlog );
+use Object::Remote::Logging qw( :log :dlog router );
use Moo;
-# this is ro because we only actually set it using local in sub run
+BEGIN {
+ $SIG{PIPE} = sub { log_debug { "Got a PIPE signal" } };
+
+ router()->exclude_forwarding
+}
+# this is ro because we only actually set it using local in sub run
has is_running => (is => 'ro', clearer => 'stop');
+#maximum duration that select() will block - undef means indefinite,
+#0 means no blocking, otherwise maximum time in seconds
+has block_duration => ( is => 'rw' );
has _read_watches => (is => 'ro', default => sub { {} });
has _read_select => (is => 'ro', default => sub { IO::Select->new });
sub watch_io {
my ($self, %watch) = @_;
my $fh = $watch{handle};
- log_debug { my $type = ref($fh); "Adding watch for ref of type '$type'" };
+ Dlog_debug { "Adding IO watch for $_" } $fh;
+
if (my $cb = $watch{on_read_ready}) {
- log_trace { "IO watcher on_read_ready has been invoked" };
+ log_trace { "IO watcher is registering with select for reading" };
$self->_read_select->add($fh);
$self->_read_watches->{$fh} = $cb;
}
if (my $cb = $watch{on_write_ready}) {
- log_trace { "IO watcher on_write_ready has been invoked" };
+ log_trace { "IO watcher is registering with select for writing" };
$self->_write_select->add($fh);
$self->_write_watches->{$fh} = $cb;
}
sub unwatch_io {
my ($self, %watch) = @_;
my $fh = $watch{handle};
- log_debug { my $type = ref($fh); "Removing watch for ref of type '$type'" };
+ Dlog_debug { "Removing IO watch for $_" } $fh;
if ($watch{on_read_ready}) {
+ log_trace { "IO watcher is removing read from select()" };
$self->_read_select->remove($fh);
delete $self->_read_watches->{$fh};
}
if ($watch{on_write_ready}) {
+ log_trace { "IO watcher is removing write from select()" };
$self->_write_select->remove($fh);
delete $self->_write_watches->{$fh};
}
return;
}
+sub _sort_timers {
+ my ($self, @new) = @_;
+ my $timers = $self->_timers;
+
+ log_trace { "Sorting timers" };
+
+ @{$timers} = sort { $a->[0] <=> $b->[0] } @{$timers}, @new;
+ return;
+}
+
sub watch_time {
my ($self, %watch) = @_;
- my $at = $watch{at} || do {
- die "watch_time requires at or after" unless my $after = $watch{after};
- time() + $after;
- };
+ my $at;
+
+ Dlog_trace { "watch_time() invoked with $_" } \%watch;
+
+ if (exists($watch{every})) {
+ $at = time() + $watch{every};
+ } elsif (exists($watch{after})) {
+ $at = time() + $watch{after};
+ } elsif (exists($watch{at})) {
+ $at = $watch{at};
+ } else {
+ die "watch_time requires every, after or at";
+ }
+
die "watch_time requires code" unless my $code = $watch{code};
my $timers = $self->_timers;
- my $new = [ $at => $code ];
- @{$timers} = sort { $a->[0] <=> $b->[0] } @{$timers}, $new;
- log_debug { "Created new timer that expires at '$at'" };
+ my $new = [ $at => $code, $watch{every} ];
+ $self->_sort_timers($new);
+ log_debug { "Created new timer with id '$new' that expires at '$at'" };
return "$new";
}
sub unwatch_time {
my ($self, $id) = @_;
- log_debug { "Removing timer with id of '$id'" };
+ log_trace { "Removing timer with id of '$id'" };
@$_ = grep !($_ eq $id), @$_ for $self->_timers;
return;
}
sub _next_timer_expires_delay {
my ($self) = @_;
my $timers = $self->_timers;
- #undef means no timeout, only returns
- #when data is ready - when the system
- #deadlocks the chatter from the timeout in
- #select clogs up the logs
- my $delay_max = undef;
+ my $delay_max = $self->block_duration;
return $delay_max unless @$timers;
my $duration = $timers->[0]->[0] - time;
if ($duration < 0) {
$duration = 0;
- } elsif (! defined($delay_max)) {
- $duration = undef;
- } elsif ($duration > $delay_max) {
- $duration = $delay_max;
+ } elsif (defined $delay_max && $duration > $delay_max) {
+ $duration = $delay_max;
}
-
+
return $duration;
}
my ($self) = @_;
my $read = $self->_read_watches;
my $write = $self->_write_watches;
+ our $Loop_Entered = 1;
my $read_count = 0;
my $write_count = 0;
my @c = caller;
my $wait_time = $self->_next_timer_expires_delay;
- log_debug { sprintf("Run loop: loop_once() has been invoked by $c[1]:$c[2] with read:%i write:%i select timeout:%s",
- scalar(keys(%$read)), scalar(keys(%$write)), defined $wait_time ? $wait_time : 'indefinite' ) };
+ log_trace {
+ sprintf("Run loop: loop_once() has been invoked by $c[1]:$c[2] with read:%i write:%i select timeout:%s",
+ scalar(keys(%$read)), scalar(keys(%$write)), defined $wait_time ? $wait_time : 'indefinite' )
+ };
my ($readable, $writeable) = IO::Select->select(
$self->_read_select, $self->_write_select, undef, $wait_time
);
- log_debug {
+ log_trace {
my $readable_count = defined $readable ? scalar(@$readable) : 0;
my $writable_count = defined $writeable ? scalar(@$writeable) : 0;
"Run loop: select returned readable:$readable_count writeable:$writable_count";
# I would love to trap errors in the select call but IO::Select doesn't
# differentiate between an error and a timeout.
# -- no, love, mst.
+
+ local $Loop_Entered;
+
log_trace { "Reading from all ready filehandles" };
foreach my $fh (@$readable) {
next unless $read->{$fh};
$read_count++;
$read->{$fh}();
-# $read->{$fh}() if $read->{$fh};
+ last if $Loop_Entered;
}
log_trace { "Writing to all ready filehandles" };
foreach my $fh (@$writeable) {
next unless $write->{$fh};
$write_count++;
$write->{$fh}();
-# $write->{$fh}() if $write->{$fh};
+ last if $Loop_Entered;
}
+
log_trace { "Read from $read_count filehandles; wrote to $write_count filehandles" };
my $timers = $self->_timers;
my $now = time();
log_trace { "Checking timers" };
while (@$timers and $timers->[0][0] <= $now) {
- Dlog_debug { "Found timer that needs to be executed: $_" } $timers->[0];
- (shift @$timers)->[1]->();
+ my $active = $timers->[0];
+ Dlog_trace { "Found timer that needs to be executed: '$active'" };
+
+ if (defined($active->[2])) {
+ #handle the case of an 'every' timer
+ $active->[0] = time() + $active->[2];
+ Dlog_trace { "scheduling timer for repeat execution at $_"} $active->[0];
+ $self->_sort_timers;
+ } else {
+ #it doesn't repeat again so get rid of it
+ shift(@$timers);
+ }
+
+ #execute the timer
+ $active->[1]->();
+
+ last if $Loop_Entered;
}
- log_debug { "Run loop: single loop is completed" };
+
+ log_trace { "Run loop: single loop is completed" };
return;
}
sub want_run {
my ($self) = @_;
- Dlog_debug { "Run loop: Incrimenting want_running, is now $_" }
+ Dlog_debug { "Run loop: Incremeting want_running, is now $_" }
++$self->{want_running};
}
sub run_while_wanted {
my ($self) = @_;
- log_debug { "Run loop: run_while_wanted() invoked" };
+ log_debug { my $wr = $self->{want_running}; "Run loop: run_while_wanted() invoked; want_running: $wr" };
$self->loop_once while $self->{want_running};
log_debug { "Run loop: run_while_wanted() completed" };
return;
sub run {
my ($self) = @_;
- log_info { "Run loop: run() invoked" };
+ log_trace { "Run loop: run() invoked" };
local $self->{is_running} = 1;
while ($self->is_running) {
$self->loop_once;
}
- log_info { "Run loop: run() completed" };
+ log_trace { "Run loop: run() completed" };
return;
}