package Net::Ping;
-# Current maintainer: colinm@cpan.org (Colin McMillen)
-# stream protocol: bronson@trestle.com (Scott Bronson)
-#
-# Original author: mose@ccsn.edu (Russell Mosemann)
-#
-# Authors of the original pingecho():
-# karrer@bernina.ethz.ch (Andreas Karrer)
-# Paul.Marquess@btinternet.com (Paul Marquess)
-#
-# Copyright (c) 2001, Colin McMillen. All rights reserved. This
-# program is free software; you may redistribute it and/or modify it
-# under the same terms as Perl itself.
-use 5.6.1;
+require 5.002;
require Exporter;
use strict;
-our(@ISA, @EXPORT, $VERSION, $def_timeout, $def_proto, $max_datasize);
-use FileHandle;
-use Socket qw( SOCK_DGRAM SOCK_STREAM SOCK_RAW PF_INET
+use vars qw(@ISA @EXPORT $VERSION
+ $def_timeout $def_proto $def_factor
+ $max_datasize $pingstring $hires $source_verify $syn_forking);
+use Fcntl qw( F_GETFL F_SETFL O_NONBLOCK );
+use Socket qw( SOCK_DGRAM SOCK_STREAM SOCK_RAW PF_INET SOL_SOCKET SO_ERROR
inet_aton inet_ntoa sockaddr_in );
+use POSIX qw( ENOTCONN ECONNREFUSED ECONNRESET EINPROGRESS EWOULDBLOCK EAGAIN WNOHANG );
+use FileHandle;
use Carp;
@ISA = qw(Exporter);
@EXPORT = qw(pingecho);
-$VERSION = 2.04;
+$VERSION = "2.31";
+
+sub SOL_IP { 0; };
+sub IP_TOS { 1; };
# Constants
$def_timeout = 5; # Default timeout to wait for a reply
-$def_proto = "udp"; # Default protocol to use for pinging
+$def_proto = "tcp"; # Default protocol to use for pinging
+$def_factor = 1.2; # Default exponential backoff rate.
$max_datasize = 1024; # Maximum data bytes in a packet
+# The data we exchange with the server for the stream protocol
+$pingstring = "pingschwingping!\n";
+$source_verify = 1; # Default is to verify source endpoint
+$syn_forking = 0;
+
+if ($^O =~ /Win32/i) {
+ # Hack to avoid this Win32 spewage:
+ # Your vendor has not defined POSIX macro ECONNREFUSED
+ *ECONNREFUSED = sub {10061;}; # "Unknown Error" Special Win32 Response?
+ *ENOTCONN = sub {10057;};
+ *ECONNRESET = sub {10054;};
+ *EINPROGRESS = sub {10036;};
+ *EWOULDBLOCK = sub {10035;};
+# $syn_forking = 1; # XXX possibly useful in < Win2K ?
+};
+
+# h2ph "asm/socket.h"
+# require "asm/socket.ph";
+sub SO_BINDTODEVICE {25;}
# Description: The pingecho() subroutine is provided for backward
# compatibility with the original Net::Ping. It accepts a host
sub pingecho
{
- my ($host, # Name or IP number of host to ping
- $timeout # Optional timeout in seconds
- ) = @_;
- my ($p); # A ping object
+ my ($host, # Name or IP number of host to ping
+ $timeout # Optional timeout in seconds
+ ) = @_;
+ my ($p); # A ping object
- $p = Net::Ping->new("tcp", $timeout);
- $p->ping($host); # Going out of scope closes the connection
+ $p = Net::Ping->new("tcp", $timeout);
+ $p->ping($host); # Going out of scope closes the connection
}
# Description: The new() method creates a new ping object. Optional
sub new
{
- my ($this,
- $proto, # Optional protocol to use for pinging
- $timeout, # Optional timeout in seconds
- $data_size # Optional additional bytes of data
- ) = @_;
- my $class = ref($this) || $this;
- my $self = {};
- my ($cnt, # Count through data bytes
- $min_datasize # Minimum data bytes required
- );
-
- bless($self, $class);
-
- $proto = $def_proto unless $proto; # Determine the protocol
- croak('Protocol for ping must be "icmp", "udp", "tcp", "stream", or "external"')
- unless $proto =~ m/^(icmp|udp|tcp|stream|external)$/;
- $self->{"proto"} = $proto;
-
- $timeout = $def_timeout unless $timeout; # Determine the timeout
- croak("Default timeout for ping must be greater than 0 seconds")
- if $timeout <= 0;
- $self->{"timeout"} = $timeout;
-
- $min_datasize = ($proto eq "udp") ? 1 : 0; # Determine data size
- $data_size = $min_datasize unless defined($data_size) && $proto ne "tcp";
- croak("Data for ping must be from $min_datasize to $max_datasize bytes")
- if ($data_size < $min_datasize) || ($data_size > $max_datasize);
- $data_size-- if $self->{"proto"} eq "udp"; # We provide the first byte
- $self->{"data_size"} = $data_size;
-
- $self->{"data"} = ""; # Construct data bytes
- for ($cnt = 0; $cnt < $self->{"data_size"}; $cnt++)
- {
- $self->{"data"} .= chr($cnt % 256);
+ my ($this,
+ $proto, # Optional protocol to use for pinging
+ $timeout, # Optional timeout in seconds
+ $data_size, # Optional additional bytes of data
+ $device, # Optional device to use
+ $tos, # Optional ToS to set
+ ) = @_;
+ my $class = ref($this) || $this;
+ my $self = {};
+ my ($cnt, # Count through data bytes
+ $min_datasize # Minimum data bytes required
+ );
+
+ bless($self, $class);
+
+ $proto = $def_proto unless $proto; # Determine the protocol
+ croak('Protocol for ping must be "icmp", "udp", "tcp", "syn", "stream", or "external"')
+ unless $proto =~ m/^(icmp|udp|tcp|syn|stream|external)$/;
+ $self->{"proto"} = $proto;
+
+ $timeout = $def_timeout unless $timeout; # Determine the timeout
+ croak("Default timeout for ping must be greater than 0 seconds")
+ if $timeout <= 0;
+ $self->{"timeout"} = $timeout;
+
+ $self->{"device"} = $device;
+
+ $self->{"tos"} = $tos;
+
+ $min_datasize = ($proto eq "udp") ? 1 : 0; # Determine data size
+ $data_size = $min_datasize unless defined($data_size) && $proto ne "tcp";
+ croak("Data for ping must be from $min_datasize to $max_datasize bytes")
+ if ($data_size < $min_datasize) || ($data_size > $max_datasize);
+ $data_size-- if $self->{"proto"} eq "udp"; # We provide the first byte
+ $self->{"data_size"} = $data_size;
+
+ $self->{"data"} = ""; # Construct data bytes
+ for ($cnt = 0; $cnt < $self->{"data_size"}; $cnt++)
+ {
+ $self->{"data"} .= chr($cnt % 256);
+ }
+
+ $self->{"local_addr"} = undef; # Don't bind by default
+ $self->{"retrans"} = $def_factor; # Default exponential backoff rate
+ $self->{"econnrefused"} = undef; # Default Connection refused behavior
+
+ $self->{"seq"} = 0; # For counting packets
+ if ($self->{"proto"} eq "udp") # Open a socket
+ {
+ $self->{"proto_num"} = (getprotobyname('udp'))[2] ||
+ croak("Can't udp protocol by name");
+ $self->{"port_num"} = (getservbyname('echo', 'udp'))[2] ||
+ croak("Can't get udp echo port by name");
+ $self->{"fh"} = FileHandle->new();
+ socket($self->{"fh"}, PF_INET, SOCK_DGRAM,
+ $self->{"proto_num"}) ||
+ croak("udp socket error - $!");
+ if ($self->{'device'}) {
+ setsockopt($self->{"fh"}, SOL_SOCKET, SO_BINDTODEVICE(), pack("Z*", $self->{'device'}))
+ or croak "error binding to device $self->{'device'} $!";
+ }
+ if ($self->{'tos'}) {
+ setsockopt($self->{"fh"}, SOL_IP, IP_TOS(), pack("I*", $self->{'tos'}))
+ or croak "error configuring tos to $self->{'tos'} $!";
+ }
+ }
+ elsif ($self->{"proto"} eq "icmp")
+ {
+ croak("icmp ping requires root privilege") if ($> and $^O ne 'VMS' and $^O ne 'cygwin');
+ $self->{"proto_num"} = (getprotobyname('icmp'))[2] ||
+ croak("Can't get icmp protocol by name");
+ $self->{"pid"} = $$ & 0xffff; # Save lower 16 bits of pid
+ $self->{"fh"} = FileHandle->new();
+ socket($self->{"fh"}, PF_INET, SOCK_RAW, $self->{"proto_num"}) ||
+ croak("icmp socket error - $!");
+ if ($self->{'device'}) {
+ setsockopt($self->{"fh"}, SOL_SOCKET, SO_BINDTODEVICE(), pack("Z*", $self->{'device'}))
+ or croak "error binding to device $self->{'device'} $!";
+ }
+ if ($self->{'tos'}) {
+ setsockopt($self->{"fh"}, SOL_IP, IP_TOS(), pack("I*", $self->{'tos'}))
+ or croak "error configuring tos to $self->{'tos'} $!";
+ }
+ }
+ elsif ($self->{"proto"} eq "tcp" || $self->{"proto"} eq "stream")
+ {
+ $self->{"proto_num"} = (getprotobyname('tcp'))[2] ||
+ croak("Can't get tcp protocol by name");
+ $self->{"port_num"} = (getservbyname('echo', 'tcp'))[2] ||
+ croak("Can't get tcp echo port by name");
+ $self->{"fh"} = FileHandle->new();
+ }
+ elsif ($self->{"proto"} eq "syn")
+ {
+ $self->{"proto_num"} = (getprotobyname('tcp'))[2] ||
+ croak("Can't get tcp protocol by name");
+ $self->{"port_num"} = (getservbyname('echo', 'tcp'))[2] ||
+ croak("Can't get tcp echo port by name");
+ if ($syn_forking) {
+ $self->{"fork_rd"} = FileHandle->new();
+ $self->{"fork_wr"} = FileHandle->new();
+ pipe($self->{"fork_rd"}, $self->{"fork_wr"});
+ $self->{"fh"} = FileHandle->new();
+ $self->{"good"} = {};
+ $self->{"bad"} = {};
+ } else {
+ $self->{"wbits"} = "";
+ $self->{"bad"} = {};
}
+ $self->{"syn"} = {};
+ $self->{"stop_time"} = 0;
+ }
+ elsif ($self->{"proto"} eq "external")
+ {
+ # No preliminary work needs to be done.
+ }
+
+ return($self);
+}
- $self->{"seq"} = 0; # For counting packets
- if ($self->{"proto"} eq "udp") # Open a socket
- {
- $self->{"proto_num"} = (getprotobyname('udp'))[2] ||
- croak("Can't udp protocol by name");
- $self->{"port_num"} = (getservbyname('echo', 'udp'))[2] ||
- croak("Can't get udp echo port by name");
- $self->{"fh"} = FileHandle->new();
- socket($self->{"fh"}, &PF_INET(), &SOCK_DGRAM(),
- $self->{"proto_num"}) ||
- croak("udp socket error - $!");
- }
- elsif ($self->{"proto"} eq "icmp")
- {
- croak("icmp ping requires root privilege") if ($> and $^O ne 'VMS');
- $self->{"proto_num"} = (getprotobyname('icmp'))[2] ||
- croak("Can't get icmp protocol by name");
- $self->{"pid"} = $$ & 0xffff; # Save lower 16 bits of pid
- $self->{"fh"} = FileHandle->new();
- socket($self->{"fh"}, &PF_INET(), &SOCK_RAW(), $self->{"proto_num"}) ||
- croak("icmp socket error - $!");
- }
- elsif ($self->{"proto"} eq "tcp" || $self->{"proto"} eq "stream")
- {
- $self->{"proto_num"} = (getprotobyname('tcp'))[2] ||
- croak("Can't get tcp protocol by name");
- $self->{"port_num"} = (getservbyname('echo', 'tcp'))[2] ||
- croak("Can't get tcp echo port by name");
- $self->{"fh"} = FileHandle->new();
+# Description: Set the local IP address from which pings will be sent.
+# For ICMP and UDP pings, this calls bind() on the already-opened socket;
+# for TCP pings, just saves the address to be used when the socket is
+# opened. Returns non-zero if successful; croaks on error.
+sub bind
+{
+ my ($self,
+ $local_addr # Name or IP number of local interface
+ ) = @_;
+ my ($ip # Packed IP number of $local_addr
+ );
+
+ croak("Usage: \$p->bind(\$local_addr)") unless @_ == 2;
+ croak("already bound") if defined($self->{"local_addr"}) &&
+ ($self->{"proto"} eq "udp" || $self->{"proto"} eq "icmp");
+
+ $ip = inet_aton($local_addr);
+ croak("nonexistent local address $local_addr") unless defined($ip);
+ $self->{"local_addr"} = $ip; # Only used if proto is tcp
+
+ if ($self->{"proto"} eq "udp" || $self->{"proto"} eq "icmp")
+ {
+ CORE::bind($self->{"fh"}, sockaddr_in(0, $ip)) ||
+ croak("$self->{'proto'} bind error - $!");
+ }
+ elsif (($self->{"proto"} ne "tcp") && ($self->{"proto"} ne "syn"))
+ {
+ croak("Unknown protocol \"$self->{proto}\" in bind()");
+ }
+
+ return 1;
+}
+
+# Description: A select() wrapper that compensates for platform
+# peculiarities.
+sub mselect
+{
+ if ($_[3] > 0 and $^O eq 'MSWin32') {
+ # On windows, select() doesn't process the message loop,
+ # but sleep() will, allowing alarm() to interrupt the latter.
+ # So we chop up the timeout into smaller pieces and interleave
+ # select() and sleep() calls.
+ my $t = $_[3];
+ my $gran = 0.5; # polling granularity in seconds
+ my @args = @_;
+ while (1) {
+ $gran = $t if $gran > $t;
+ my $nfound = select($_[0], $_[1], $_[2], $gran);
+ $t -= $gran;
+ return $nfound if $nfound or !defined($nfound) or $t <= 0;
+
+ sleep(0);
+ ($_[0], $_[1], $_[2]) = @args;
+ }
+ }
+ else {
+ return select($_[0], $_[1], $_[2], $_[3]);
}
+}
+
+# Description: Allow UDP source endpoint comparision to be
+# skipped for those remote interfaces that do
+# not response from the same endpoint.
+
+sub source_verify
+{
+ my $self = shift;
+ $source_verify = 1 unless defined
+ ($source_verify = ((defined $self) && (ref $self)) ? shift() : $self);
+}
+
+# Description: Set whether or not the connect
+# behavior should enforce remote service
+# availability as well as reachability.
+
+sub service_check
+{
+ my $self = shift;
+ $self->{"econnrefused"} = 1 unless defined
+ ($self->{"econnrefused"} = shift());
+}
+
+sub tcp_service_check
+{
+ service_check(@_);
+}
+
+# Description: Set exponential backoff for retransmission.
+# Should be > 1 to retain exponential properties.
+# If set to 0, retransmissions are disabled.
+
+sub retrans
+{
+ my $self = shift;
+ $self->{"retrans"} = shift;
+}
+# Description: allows the module to use milliseconds as returned by
+# the Time::HiRes module
- return($self);
+$hires = 0;
+sub hires
+{
+ my $self = shift;
+ $hires = 1 unless defined
+ ($hires = ((defined $self) && (ref $self)) ? shift() : $self);
+ require Time::HiRes if $hires;
+}
+
+sub time
+{
+ return $hires ? Time::HiRes::time() : CORE::time();
+}
+
+# Description: Sets or clears the O_NONBLOCK flag on a file handle.
+sub socket_blocking_mode
+{
+ my ($self,
+ $fh, # the file handle whose flags are to be modified
+ $block) = @_; # if true then set the blocking
+ # mode (clear O_NONBLOCK), otherwise
+ # set the non-blocking mode (set O_NONBLOCK)
+
+ my $flags;
+ if ($^O eq 'MSWin32' || $^O eq 'VMS') {
+ # FIONBIO enables non-blocking sockets on windows and vms.
+ # FIONBIO is (0x80000000|(4<<16)|(ord('f')<<8)|126), as per winsock.h, ioctl.h
+ my $f = 0x8004667e;
+ my $v = pack("L", $block ? 0 : 1);
+ ioctl($fh, $f, $v) or croak("ioctl failed: $!");
+ return;
+ }
+ if ($flags = fcntl($fh, F_GETFL, 0)) {
+ $flags = $block ? ($flags & ~O_NONBLOCK) : ($flags | O_NONBLOCK);
+ if (!fcntl($fh, F_SETFL, $flags)) {
+ croak("fcntl F_SETFL: $!");
+ }
+ } else {
+ croak("fcntl F_GETFL: $!");
+ }
}
# Description: Ping a host name or IP number with an optional timeout.
# First lookup the host, and return undef if it is not found. Otherwise
-# perform the specific ping method based on the protocol. Return the
+# perform the specific ping method based on the protocol. Return the
# result of the ping.
sub ping
{
- my ($self,
- $host, # Name or IP number of host to ping
- $timeout # Seconds after which ping times out
- ) = @_;
- my ($ip, # Packed IP number of $host
- $ret # The return value
- );
-
- croak("Usage: \$p->ping(\$host [, \$timeout])") unless @_ == 2 || @_ == 3;
- $timeout = $self->{"timeout"} unless $timeout;
- croak("Timeout must be greater than 0 seconds") if $timeout <= 0;
-
- $ip = inet_aton($host);
- return(undef) unless defined($ip); # Does host exist?
-
- # Dispatch to the appropriate routine.
- return $self->ping_external($ip, $timeout) if $self->{"proto"} eq "external";
- return $self->ping_udp($ip, $timeout) if $self->{"proto"} eq "udp";
- return $self->ping_icmp($ip, $timeout) if $self->{"proto"} eq "icmp";
- return $self->ping_tcp($ip, $timeout) if $self->{"proto"} eq "tcp";
- return $self->ping_stream($ip, $timeout) if $self->{"proto"} eq "stream";
-
+ my ($self,
+ $host, # Name or IP number of host to ping
+ $timeout, # Seconds after which ping times out
+ ) = @_;
+ my ($ip, # Packed IP number of $host
+ $ret, # The return value
+ $ping_time, # When ping began
+ );
+
+ croak("Usage: \$p->ping(\$host [, \$timeout])") unless @_ == 2 || @_ == 3;
+ $timeout = $self->{"timeout"} unless $timeout;
+ croak("Timeout must be greater than 0 seconds") if $timeout <= 0;
+
+ $ip = inet_aton($host);
+ return () unless defined($ip); # Does host exist?
+
+ # Dispatch to the appropriate routine.
+ $ping_time = &time();
+ if ($self->{"proto"} eq "external") {
+ $ret = $self->ping_external($ip, $timeout);
+ }
+ elsif ($self->{"proto"} eq "udp") {
+ $ret = $self->ping_udp($ip, $timeout);
+ }
+ elsif ($self->{"proto"} eq "icmp") {
+ $ret = $self->ping_icmp($ip, $timeout);
+ }
+ elsif ($self->{"proto"} eq "tcp") {
+ $ret = $self->ping_tcp($ip, $timeout);
+ }
+ elsif ($self->{"proto"} eq "stream") {
+ $ret = $self->ping_stream($ip, $timeout);
+ }
+ elsif ($self->{"proto"} eq "syn") {
+ $ret = $self->ping_syn($host, $ip, $ping_time, $ping_time+$timeout);
+ } else {
croak("Unknown protocol \"$self->{proto}\" in ping()");
+ }
+
+ return wantarray ? ($ret, &time() - $ping_time, inet_ntoa($ip)) : $ret;
}
# Uses Net::Ping::External to do an external ping.
$timeout # Seconds after which ping times out
) = @_;
- eval { require Net::Ping::External; };
- croak('Protocol "external" not supported on your system: Net::Ping::External not found') if $@;
+ eval { require Net::Ping::External; }
+ or croak('Protocol "external" not supported on your system: Net::Ping::External not found');
return Net::Ping::External::ping(ip => $ip, timeout => $timeout);
}
+use constant ICMP_ECHOREPLY => 0; # ICMP packet types
+use constant ICMP_ECHO => 8;
+use constant ICMP_STRUCT => "C2 n3 A"; # Structure of a minimal ICMP packet
+use constant SUBCODE => 0; # No ICMP subcode for ECHO and ECHOREPLY
+use constant ICMP_FLAGS => 0; # No special flags for send or recv
+use constant ICMP_PORT => 0; # No port with ICMP
+
sub ping_icmp
{
- my ($self,
- $ip, # Packed IP number of the host
- $timeout # Seconds after which ping times out
- ) = @_;
-
- my $ICMP_ECHOREPLY = 0; # ICMP packet types
- my $ICMP_ECHO = 8;
- my $icmp_struct = "C2 S3 A"; # Structure of a minimal ICMP packet
- my $subcode = 0; # No ICMP subcode for ECHO and ECHOREPLY
- my $flags = 0; # No special flags when opening a socket
- my $port = 0; # No port with ICMP
-
- my ($saddr, # sockaddr_in with port and ip
- $checksum, # Checksum of ICMP packet
- $msg, # ICMP packet to send
- $len_msg, # Length of $msg
- $rbits, # Read bits, filehandles for reading
- $nfound, # Number of ready filehandles found
- $finish_time, # Time ping should be finished
- $done, # set to 1 when we are done
- $ret, # Return value
- $recv_msg, # Received message including IP header
- $from_saddr, # sockaddr_in of sender
- $from_port, # Port packet was sent from
- $from_ip, # Packed IP of sender
- $from_type, # ICMP type
- $from_subcode, # ICMP subcode
- $from_chk, # ICMP packet checksum
- $from_pid, # ICMP packet id
- $from_seq, # ICMP packet sequence
- $from_msg # ICMP message
- );
-
- $self->{"seq"} = ($self->{"seq"} + 1) % 65536; # Increment sequence
- $checksum = 0; # No checksum for starters
- $msg = pack($icmp_struct . $self->{"data_size"}, $ICMP_ECHO, $subcode,
- $checksum, $self->{"pid"}, $self->{"seq"}, $self->{"data"});
- $checksum = Net::Ping->checksum($msg);
- $msg = pack($icmp_struct . $self->{"data_size"}, $ICMP_ECHO, $subcode,
- $checksum, $self->{"pid"}, $self->{"seq"}, $self->{"data"});
- $len_msg = length($msg);
- $saddr = sockaddr_in($port, $ip);
- send($self->{"fh"}, $msg, $flags, $saddr); # Send the message
-
- $rbits = "";
- vec($rbits, $self->{"fh"}->fileno(), 1) = 1;
- $ret = 0;
- $done = 0;
- $finish_time = time() + $timeout; # Must be done by this time
- while (!$done && $timeout > 0) # Keep trying if we have time
+ my ($self,
+ $ip, # Packed IP number of the host
+ $timeout # Seconds after which ping times out
+ ) = @_;
+
+ my ($saddr, # sockaddr_in with port and ip
+ $checksum, # Checksum of ICMP packet
+ $msg, # ICMP packet to send
+ $len_msg, # Length of $msg
+ $rbits, # Read bits, filehandles for reading
+ $nfound, # Number of ready filehandles found
+ $finish_time, # Time ping should be finished
+ $done, # set to 1 when we are done
+ $ret, # Return value
+ $recv_msg, # Received message including IP header
+ $from_saddr, # sockaddr_in of sender
+ $from_port, # Port packet was sent from
+ $from_ip, # Packed IP of sender
+ $from_type, # ICMP type
+ $from_subcode, # ICMP subcode
+ $from_chk, # ICMP packet checksum
+ $from_pid, # ICMP packet id
+ $from_seq, # ICMP packet sequence
+ $from_msg # ICMP message
+ );
+
+ $self->{"seq"} = ($self->{"seq"} + 1) % 65536; # Increment sequence
+ $checksum = 0; # No checksum for starters
+ $msg = pack(ICMP_STRUCT . $self->{"data_size"}, ICMP_ECHO, SUBCODE,
+ $checksum, $self->{"pid"}, $self->{"seq"}, $self->{"data"});
+ $checksum = Net::Ping->checksum($msg);
+ $msg = pack(ICMP_STRUCT . $self->{"data_size"}, ICMP_ECHO, SUBCODE,
+ $checksum, $self->{"pid"}, $self->{"seq"}, $self->{"data"});
+ $len_msg = length($msg);
+ $saddr = sockaddr_in(ICMP_PORT, $ip);
+ $self->{"from_ip"} = undef;
+ $self->{"from_type"} = undef;
+ $self->{"from_subcode"} = undef;
+ send($self->{"fh"}, $msg, ICMP_FLAGS, $saddr); # Send the message
+
+ $rbits = "";
+ vec($rbits, $self->{"fh"}->fileno(), 1) = 1;
+ $ret = 0;
+ $done = 0;
+ $finish_time = &time() + $timeout; # Must be done by this time
+ while (!$done && $timeout > 0) # Keep trying if we have time
+ {
+ $nfound = mselect((my $rout=$rbits), undef, undef, $timeout); # Wait for packet
+ $timeout = $finish_time - &time(); # Get remaining time
+ if (!defined($nfound)) # Hmm, a strange error
{
- $nfound = select($rbits, undef, undef, $timeout); # Wait for packet
- $timeout = $finish_time - time(); # Get remaining time
- if (!defined($nfound)) # Hmm, a strange error
- {
- $ret = undef;
- $done = 1;
- }
- elsif ($nfound) # Got a packet from somewhere
- {
- $recv_msg = "";
- $from_saddr = recv($self->{"fh"}, $recv_msg, 1500, $flags);
- ($from_port, $from_ip) = sockaddr_in($from_saddr);
- ($from_type, $from_subcode, $from_chk,
- $from_pid, $from_seq, $from_msg) =
- unpack($icmp_struct . $self->{"data_size"},
- substr($recv_msg, length($recv_msg) - $len_msg,
- $len_msg));
- if (($from_type == $ICMP_ECHOREPLY) &&
- ($from_ip eq $ip) &&
- ($from_pid == $self->{"pid"}) && # Does the packet check out?
- ($from_seq == $self->{"seq"}))
- {
- $ret = 1; # It's a winner
- $done = 1;
- }
- }
- else # Oops, timed out
- {
- $done = 1;
+ $ret = undef;
+ $done = 1;
+ }
+ elsif ($nfound) # Got a packet from somewhere
+ {
+ $recv_msg = "";
+ $from_pid = -1;
+ $from_seq = -1;
+ $from_saddr = recv($self->{"fh"}, $recv_msg, 1500, ICMP_FLAGS);
+ ($from_port, $from_ip) = sockaddr_in($from_saddr);
+ ($from_type, $from_subcode) = unpack("C2", substr($recv_msg, 20, 2));
+ if ($from_type == ICMP_ECHOREPLY) {
+ ($from_pid, $from_seq) = unpack("n3", substr($recv_msg, 24, 4))
+ if length $recv_msg >= 28;
+ } else {
+ ($from_pid, $from_seq) = unpack("n3", substr($recv_msg, 52, 4))
+ if length $recv_msg >= 56;
+ }
+ $self->{"from_ip"} = $from_ip;
+ $self->{"from_type"} = $from_type;
+ $self->{"from_subcode"} = $from_subcode;
+ if (($from_pid == $self->{"pid"}) && # Does the packet check out?
+ ($from_seq == $self->{"seq"})) {
+ if ($from_type == ICMP_ECHOREPLY){
+ $ret = 1;
}
+ $done = 1;
+ }
+ } else { # Oops, timed out
+ $done = 1;
}
- return($ret)
+ }
+ return $ret;
+}
+
+sub icmp_result {
+ my ($self) = @_;
+ my $ip = $self->{"from_ip"} || "";
+ $ip = "\0\0\0\0" unless 4 == length $ip;
+ return (inet_ntoa($ip),($self->{"from_type"} || 0), ($self->{"from_subcode"} || 0));
}
# Description: Do a checksum on the message. Basically sum all of
sub checksum
{
- my ($class,
- $msg # The message to checksum
- ) = @_;
- my ($len_msg, # Length of the message
- $num_short, # The number of short words in the message
- $short, # One short word
- $chk # The checksum
- );
-
- $len_msg = length($msg);
- $num_short = int($len_msg / 2);
- $chk = 0;
- foreach $short (unpack("S$num_short", $msg))
- {
- $chk += $short;
- } # Add the odd byte in
- $chk += (unpack("C", substr($msg, $len_msg - 1, 1)) << 8) if $len_msg % 2;
- $chk = ($chk >> 16) + ($chk & 0xffff); # Fold high into low
- return(~(($chk >> 16) + $chk) & 0xffff); # Again and complement
+ my ($class,
+ $msg # The message to checksum
+ ) = @_;
+ my ($len_msg, # Length of the message
+ $num_short, # The number of short words in the message
+ $short, # One short word
+ $chk # The checksum
+ );
+
+ $len_msg = length($msg);
+ $num_short = int($len_msg / 2);
+ $chk = 0;
+ foreach $short (unpack("n$num_short", $msg))
+ {
+ $chk += $short;
+ } # Add the odd byte in
+ $chk += (unpack("C", substr($msg, $len_msg - 1, 1)) << 8) if $len_msg % 2;
+ $chk = ($chk >> 16) + ($chk & 0xffff); # Fold high into low
+ return(~(($chk >> 16) + $chk) & 0xffff); # Again and complement
}
-# Warning: this method may generate false positives.
-# It is meant to be a private method and should only
-# be invoked by ping_tcp() if $^O =~ /win32/i.
-
-sub _ping_tcp_win
-{
- my ($self,
- $ip, # Packed IP number of the host
- ) = @_;
- my ($saddr, # sockaddr_in with port and ip
- $ret # The return value
- );
-
- socket($self->{"fh"}, &PF_INET(), &SOCK_STREAM(), $self->{"proto_num"}) ||
- croak("tcp socket error - $!");
-
- $saddr = sockaddr_in($self->{"port_num"}, $ip);
-
- $ret = 0; # Default to unreachable
-
- eval { $ret = connect($self->{"fh"}, $saddr) };
- # If the remote host exists but returns "Connection refused",
- # the call to connect() sets $! to "Unknown error". So, we
- # assume that an "Unknown error" actually means the host is
- # alive. This assumption may occassionally give false positives.
- $ret = 1 if $! =~ /Unknown error/i;
+# Description: Perform a tcp echo ping. Since a tcp connection is
+# host specific, we have to open and close each connection here. We
+# can't just leave a socket open. Because of the robust nature of
+# tcp, it will take a while before it gives up trying to establish a
+# connection. Therefore, we use select() on a non-blocking socket to
+# check against our timeout. No data bytes are actually
+# sent since the successful establishment of a connection is proof
+# enough of the reachability of the remote host. Also, tcp is
+# expensive and doesn't need our help to add to the overhead.
- $self->{"fh"}->close();
- return $ret;
+sub ping_tcp
+{
+ my ($self,
+ $ip, # Packed IP number of the host
+ $timeout # Seconds after which ping times out
+ ) = @_;
+ my ($ret # The return value
+ );
+
+ $! = 0;
+ $ret = $self -> tcp_connect( $ip, $timeout);
+ if (!$self->{"econnrefused"} &&
+ $! == ECONNREFUSED) {
+ $ret = 1; # "Connection refused" means reachable
+ }
+ $self->{"fh"}->close();
+ return $ret;
}
-# Buggy Winsock API doesn't allow us to use non-blocking connect()
-# calls. Hence, if our OS is Windows, we need to create a new process
-# to run a blocking connect attempt, and kill it after the timeout has
-# passed. Unfortunately, this won't work with the stream protocol.
-
-sub ping_tcp_win32
+sub tcp_connect
{
- my ($self,
- $ip, # Packed IP number of the host
- $timeout # Seconds after which open times out
- ) = @_;
-
- socket($self->{"fh"}, &PF_INET(), &SOCK_STREAM(), $self->{"proto_num"}) ||
- croak("tcp socket error - $!");
+ my ($self,
+ $ip, # Packed IP number of the host
+ $timeout # Seconds after which connect times out
+ ) = @_;
+ my ($saddr); # Packed IP and Port
- my $saddr = sockaddr_in($self->{"port_num"}, $ip);
+ $saddr = sockaddr_in($self->{"port_num"}, $ip);
- my ($child, $ret, $pid, $time);
- my $host = inet_ntoa($ip);
+ my $ret = 0; # Default to unreachable
- # The code we will be executing in our new process.
- my $code = '"use Net::Ping; $p = Net::Ping->new(\'tcp\'); ';
- $code .= 'exit($p->_ping_tcp_win(' . $host . '))"';
+ my $do_socket = sub {
+ socket($self->{"fh"}, PF_INET, SOCK_STREAM, $self->{"proto_num"}) ||
+ croak("tcp socket error - $!");
+ if (defined $self->{"local_addr"} &&
+ !CORE::bind($self->{"fh"}, sockaddr_in(0, $self->{"local_addr"}))) {
+ croak("tcp bind error - $!");
+ }
+ if ($self->{'device'}) {
+ setsockopt($self->{"fh"}, SOL_SOCKET, SO_BINDTODEVICE(), pack("Z*", $self->{'device'}))
+ or croak("error binding to device $self->{'device'} $!");
+ }
+ if ($self->{'tos'}) {
+ setsockopt($self->{"fh"}, SOL_IP, IP_TOS(), pack("I*", $self->{'tos'}))
+ or croak "error configuring tos to $self->{'tos'} $!";
+ }
+ };
+ my $do_connect = sub {
+ $self->{"ip"} = $ip;
+ # ECONNREFUSED is 10061 on MSWin32. If we pass it as child error through $?,
+ # we'll get (10061 & 255) = 77, so we cannot check it in the parent process.
+ return ($ret = connect($self->{"fh"}, $saddr) || ($! == ECONNREFUSED && !$self->{"econnrefused"}));
+ };
+ my $do_connect_nb = sub {
+ # Set O_NONBLOCK property on filehandle
+ $self->socket_blocking_mode($self->{"fh"}, 0);
+
+ # start the connection attempt
+ if (!connect($self->{"fh"}, $saddr)) {
+ if ($! == ECONNREFUSED) {
+ $ret = 1 unless $self->{"econnrefused"};
+ } elsif ($! != EINPROGRESS && ($^O ne 'MSWin32' || $! != EWOULDBLOCK)) {
+ # EINPROGRESS is the expected error code after a connect()
+ # on a non-blocking socket. But if the kernel immediately
+ # determined that this connect() will never work,
+ # Simply respond with "unreachable" status.
+ # (This can occur on some platforms with errno
+ # EHOSTUNREACH or ENETUNREACH.)
+ return 0;
+ } else {
+ # Got the expected EINPROGRESS.
+ # Just wait for connection completion...
+ my ($wbits, $wout, $wexc);
+ $wout = $wexc = $wbits = "";
+ vec($wbits, $self->{"fh"}->fileno, 1) = 1;
+
+ my $nfound = mselect(undef,
+ ($wout = $wbits),
+ ($^O eq 'MSWin32' ? ($wexc = $wbits) : undef),
+ $timeout);
+ warn("select: $!") unless defined $nfound;
+
+ if ($nfound && vec($wout, $self->{"fh"}->fileno, 1)) {
+ # the socket is ready for writing so the connection
+ # attempt completed. test whether the connection
+ # attempt was successful or not
+
+ if (getpeername($self->{"fh"})) {
+ # Connection established to remote host
+ $ret = 1;
+ } else {
+ # TCP ACK will never come from this host
+ # because there was an error connecting.
+
+ # This should set $! to the correct error.
+ my $char;
+ sysread($self->{"fh"},$char,1);
+ $! = ECONNREFUSED if ($! == EAGAIN && $^O =~ /cygwin/i);
+
+ $ret = 1 if (!$self->{"econnrefused"}
+ && $! == ECONNREFUSED);
+ }
+ } else {
+ # the connection attempt timed out (or there were connect
+ # errors on Windows)
+ if ($^O =~ 'MSWin32') {
+ # If the connect will fail on a non-blocking socket,
+ # winsock reports ECONNREFUSED as an exception, and we
+ # need to fetch the socket-level error code via getsockopt()
+ # instead of using the thread-level error code that is in $!.
+ if ($nfound && vec($wexc, $self->{"fh"}->fileno, 1)) {
+ $! = unpack("i", getsockopt($self->{"fh"}, SOL_SOCKET,
+ SO_ERROR));
+ }
+ }
+ }
+ }
+ } else {
+ # Connection established to remote host
+ $ret = 1;
+ }
- # Call the process.
- $pid = system(1, "perl", "-e", $code);
+ # Unset O_NONBLOCK property on filehandle
+ $self->socket_blocking_mode($self->{"fh"}, 1);
+ $self->{"ip"} = $ip;
+ return $ret;
+ };
+
+ if ($syn_forking) {
+ # Buggy Winsock API doesn't allow nonblocking connect.
+ # Hence, if our OS is Windows, we need to create a separate
+ # process to do the blocking connect attempt.
+ # XXX Above comments are not true at least for Win2K, where
+ # nonblocking connect works.
+
+ $| = 1; # Clear buffer prior to fork to prevent duplicate flushing.
+ $self->{'tcp_chld'} = fork;
+ if (!$self->{'tcp_chld'}) {
+ if (!defined $self->{'tcp_chld'}) {
+ # Fork did not work
+ warn "Fork error: $!";
+ return 0;
+ }
+ &{ $do_socket }();
+
+ # Try a slow blocking connect() call
+ # and report the status to the parent.
+ if ( &{ $do_connect }() ) {
+ $self->{"fh"}->close();
+ # No error
+ exit 0;
+ } else {
+ # Pass the error status to the parent
+ # Make sure that $! <= 255
+ exit($! <= 255 ? $! : 255);
+ }
+ }
- # Import the POSIX version of <sys/wait.h>
- require POSIX;
- import POSIX qw(:sys_wait_h);
+ &{ $do_socket }();
+
+ my $patience = &time() + $timeout;
+
+ my ($child, $child_errno);
+ $? = 0; $child_errno = 0;
+ # Wait up to the timeout
+ # And clean off the zombie
+ do {
+ $child = waitpid($self->{'tcp_chld'}, &WNOHANG());
+ $child_errno = $? >> 8;
+ select(undef, undef, undef, 0.1);
+ } while &time() < $patience && $child != $self->{'tcp_chld'};
+
+ if ($child == $self->{'tcp_chld'}) {
+ if ($self->{"proto"} eq "stream") {
+ # We need the socket connected here, in parent
+ # Should be safe to connect because the child finished
+ # within the timeout
+ &{ $do_connect }();
+ }
+ # $ret cannot be set by the child process
+ $ret = !$child_errno;
+ } else {
+ # Time must have run out.
+ # Put that choking client out of its misery
+ kill "KILL", $self->{'tcp_chld'};
+ # Clean off the zombie
+ waitpid($self->{'tcp_chld'}, 0);
+ $ret = 0;
+ }
+ delete $self->{'tcp_chld'};
+ $! = $child_errno;
+ } else {
+ # Otherwise don't waste the resources to fork
- # Get the current time; will be used to tell if we've timed out.
- $time = time;
+ &{ $do_socket }();
- # Wait for the child to return or for the timeout to expire.
- do {
- $child = waitpid($pid, &WNOHANG());
- $ret = $?;
- } until time > ($time + $timeout) or $child;
+ &{ $do_connect_nb }();
+ }
- # Return an appropriate value; 0 if the child didn't return,
- # the return value of the child otherwise.
- return $ret >> 8 if $child;
+ return $ret;
+}
- kill $pid;
- return 0;
+sub DESTROY {
+ my $self = shift;
+ if ($self->{'proto'} eq 'tcp' &&
+ $self->{'tcp_chld'}) {
+ # Put that choking client out of its misery
+ kill "KILL", $self->{'tcp_chld'};
+ # Clean off the zombie
+ waitpid($self->{'tcp_chld'}, 0);
+ }
}
# This writes the given string to the socket and then reads it
# back. It returns 1 on success, 0 on failure.
sub tcp_echo
{
- my $self = shift;
- my $timeout = shift;
- my $pingstring = shift;
-
- my $ret = undef;
- my $time = time;
- my $wrstr = $pingstring;
- my $rdstr = "";
-
- eval <<'EOM';
- do {
- my $rin = "";
- vec($rin, $self->{"fh"}->fileno(), 1) = 1;
-
- my $rout = undef;
- if($wrstr) {
- $rout = "";
- vec($rout, $self->{"fh"}->fileno(), 1) = 1;
- }
-
- if(select($rin, $rout, undef, ($time + $timeout) - time())) {
-
- if($rout && vec($rout,$self->{"fh"}->fileno(),1)) {
- my $num = syswrite($self->{"fh"}, $wrstr);
- if($num) {
- # If it was a partial write, update and try again.
- $wrstr = substr($wrstr,$num);
- } else {
- # There was an error.
- $ret = 0;
- }
- }
-
- if(vec($rin,$self->{"fh"}->fileno(),1)) {
- my $reply;
- if(sysread($self->{"fh"},$reply,length($pingstring)-length($rdstr))) {
- $rdstr .= $reply;
- $ret = 1 if $rdstr eq $pingstring;
- } else {
- # There was an error.
- $ret = 0;
- }
- }
-
- }
- } until time() > ($time + $timeout) || defined($ret);
-EOM
-
- return $ret;
-}
-
-sub tcp_connect
-{
- my ($self,
- $ip, # Packed IP number of the host
- $timeout # Seconds after which open times out
- ) = @_;
-
- # Should we go back to using blocking IO and alarms to implement
- # the stream protocol on win32?
- croak "no nonblocking io -- can't stream ping on win32"
- if ($^O =~ /win32/i);
+ my $self = shift;
+ my $timeout = shift;
+ my $pingstring = shift;
+
+ my $ret = undef;
+ my $time = &time();
+ my $wrstr = $pingstring;
+ my $rdstr = "";
+
+ eval <<'EOM';
+ do {
+ my $rin = "";
+ vec($rin, $self->{"fh"}->fileno(), 1) = 1;
+
+ my $rout = undef;
+ if($wrstr) {
+ $rout = "";
+ vec($rout, $self->{"fh"}->fileno(), 1) = 1;
+ }
+
+ if(mselect($rin, $rout, undef, ($time + $timeout) - &time())) {
+
+ if($rout && vec($rout,$self->{"fh"}->fileno(),1)) {
+ my $num = syswrite($self->{"fh"}, $wrstr, length $wrstr);
+ if($num) {
+ # If it was a partial write, update and try again.
+ $wrstr = substr($wrstr,$num);
+ } else {
+ # There was an error.
+ $ret = 0;
+ }
+ }
- $self->{"ip"} = $ip;
+ if(vec($rin,$self->{"fh"}->fileno(),1)) {
+ my $reply;
+ if(sysread($self->{"fh"},$reply,length($pingstring)-length($rdstr))) {
+ $rdstr .= $reply;
+ $ret = 1 if $rdstr eq $pingstring;
+ } else {
+ # There was an error.
+ $ret = 0;
+ }
+ }
- socket($self->{"fh"}, &PF_INET(), &SOCK_STREAM(), $self->{"proto_num"}) ||
- croak("tcp socket error - $!");
+ }
+ } until &time() > ($time + $timeout) || defined($ret);
+EOM
- my $saddr = sockaddr_in($self->{"port_num"}, $ip);
- my $ret = 0;
-
- # Try a non-blocking TCP connect to the remote echo port.
- # Our call to select() below will stop after the timeout has
- # passed or set the return value to true if the connection
- # succeeds in time.
- $self->{"fh"}->blocking(0);
- connect($self->{"fh"}, $saddr);
-
- # This replaces the breakage where we were listening on a
- # socket that would never produce any data. This works, but
- # it's now quite a bit heavier than the old Net::Ping. I'd
- # like to see it reverted.
- return $self->tcp_echo($timeout, "ping!\n");
+ return $ret;
}
-# Description: Perform a tcp echo ping. Since a tcp connection is
-# host specific, we have to open and close each connection here. We
-# can't just leave a socket open. Because of the robust nature of
-# tcp, it will take a while before it gives up trying to establish a
-# connection. Therefore, we use select() on a non-blocking socket to
-# check against our timeout. No data bytes are actually
-# sent since the successful establishment of a connection is proof
-# enough of the reachability of the remote host. Also, tcp is
-# expensive and doesn't need our help to add to the overhead.
-sub ping_tcp
-{
- my ($self,
- $ip, # Packed IP number of the host
- $timeout # Seconds after which ping times out
- ) = @_;
-
- my $ret;
-
- # tcp_connect won't work on win32, so special-case it if need be.
- if ($^O =~ /win32/i) {
- $ret = $self->ping_tcp_win32($ip, $timeout);
- } else {
- $ret = $self->tcp_connect($ip, $timeout);
- $self->{"fh"}->close();
- }
- return $ret;
-}
# Description: Perform a stream ping. If the tcp connection isn't
# already open, it opens it. It then sends some data and waits for
sub ping_stream
{
- my ($self,
- $ip, # Packed IP number of the host
- $timeout # Seconds after which ping times out
- ) = @_;
-
- my $pingstring = "ping!\n"; # The data we exchange with the server
+ my ($self,
+ $ip, # Packed IP number of the host
+ $timeout # Seconds after which ping times out
+ ) = @_;
- # Open the stream if it's not already open
- if(!defined $self->{"fh"}->fileno()) {
- $self->tcp_connect($ip, $timeout) or return 0;
- }
+ # Open the stream if it's not already open
+ if(!defined $self->{"fh"}->fileno()) {
+ $self->tcp_connect($ip, $timeout) or return 0;
+ }
- croak "tried to switch servers while stream pinging"
- if $self->{"ip"} ne $ip;
+ croak "tried to switch servers while stream pinging"
+ if $self->{"ip"} ne $ip;
- return $self->tcp_echo($timeout, "pingschwingping!\n");
+ return $self->tcp_echo($timeout, $pingstring);
}
# Description: opens the stream. You would do this if you want to
sub open
{
- my ($self,
- $ip, # Packed IP number of the host
- $timeout # Seconds after which open times out
- ) = @_;
-
- $timeout = $self->{"timeout"} unless $timeout;
-
- if($self->{"proto"} eq "stream") {
- if(defined($self->{"fh"}->fileno())) {
- croak("socket is already open");
- } else {
- $self->tcp_connect($ip, $timeout);
- }
- }
+ my ($self,
+ $host, # Host or IP address
+ $timeout # Seconds after which open times out
+ ) = @_;
+
+ my ($ip); # Packed IP number of the host
+ $ip = inet_aton($host);
+ $timeout = $self->{"timeout"} unless $timeout;
+
+ if($self->{"proto"} eq "stream") {
+ if(defined($self->{"fh"}->fileno())) {
+ croak("socket is already open");
+ } else {
+ $self->tcp_connect($ip, $timeout);
+ }
+ }
}
+
# Description: Perform a udp echo ping. Construct a message of
# at least the one-byte sequence number and any additional data bytes.
# Send the message out and wait for a message to come back. If we
# done. Otherwise go back and wait for the message until we run out
# of time. Return the result of our efforts.
+use constant UDP_FLAGS => 0; # Nothing special on send or recv
sub ping_udp
{
- my ($self,
- $ip, # Packed IP number of the host
- $timeout # Seconds after which ping times out
- ) = @_;
-
- my $flags = 0; # Nothing special on open
-
- my ($saddr, # sockaddr_in with port and ip
- $ret, # The return value
- $msg, # Message to be echoed
- $finish_time, # Time ping should be finished
- $done, # Set to 1 when we are done pinging
- $rbits, # Read bits, filehandles for reading
- $nfound, # Number of ready filehandles found
- $from_saddr, # sockaddr_in of sender
- $from_msg, # Characters echoed by $host
- $from_port, # Port message was echoed from
- $from_ip # Packed IP number of sender
- );
-
- $saddr = sockaddr_in($self->{"port_num"}, $ip);
- $self->{"seq"} = ($self->{"seq"} + 1) % 256; # Increment sequence
- $msg = chr($self->{"seq"}) . $self->{"data"}; # Add data if any
- send($self->{"fh"}, $msg, $flags, $saddr); # Send it
-
- $rbits = "";
- vec($rbits, $self->{"fh"}->fileno(), 1) = 1;
- $ret = 0; # Default to unreachable
- $done = 0;
- $finish_time = time() + $timeout; # Ping needs to be done by then
- while (!$done && $timeout > 0)
+ my ($self,
+ $ip, # Packed IP number of the host
+ $timeout # Seconds after which ping times out
+ ) = @_;
+
+ my ($saddr, # sockaddr_in with port and ip
+ $ret, # The return value
+ $msg, # Message to be echoed
+ $finish_time, # Time ping should be finished
+ $flush, # Whether socket needs to be disconnected
+ $connect, # Whether socket needs to be connected
+ $done, # Set to 1 when we are done pinging
+ $rbits, # Read bits, filehandles for reading
+ $nfound, # Number of ready filehandles found
+ $from_saddr, # sockaddr_in of sender
+ $from_msg, # Characters echoed by $host
+ $from_port, # Port message was echoed from
+ $from_ip # Packed IP number of sender
+ );
+
+ $saddr = sockaddr_in($self->{"port_num"}, $ip);
+ $self->{"seq"} = ($self->{"seq"} + 1) % 256; # Increment sequence
+ $msg = chr($self->{"seq"}) . $self->{"data"}; # Add data if any
+
+ if ($self->{"connected"}) {
+ if ($self->{"connected"} ne $saddr) {
+ # Still connected to wrong destination.
+ # Need to flush out the old one.
+ $flush = 1;
+ }
+ } else {
+ # Not connected yet.
+ # Need to connect() before send()
+ $connect = 1;
+ }
+
+ # Have to connect() and send() instead of sendto()
+ # in order to pick up on the ECONNREFUSED setting
+ # from recv() or double send() errno as utilized in
+ # the concept by rdw @ perlmonks. See:
+ # http://perlmonks.thepen.com/42898.html
+ if ($flush) {
+ # Need to socket() again to flush the descriptor
+ # This will disconnect from the old saddr.
+ socket($self->{"fh"}, PF_INET, SOCK_DGRAM,
+ $self->{"proto_num"});
+ }
+ # Connect the socket if it isn't already connected
+ # to the right destination.
+ if ($flush || $connect) {
+ connect($self->{"fh"}, $saddr); # Tie destination to socket
+ $self->{"connected"} = $saddr;
+ }
+ send($self->{"fh"}, $msg, UDP_FLAGS); # Send it
+
+ $rbits = "";
+ vec($rbits, $self->{"fh"}->fileno(), 1) = 1;
+ $ret = 0; # Default to unreachable
+ $done = 0;
+ my $retrans = 0.01;
+ my $factor = $self->{"retrans"};
+ $finish_time = &time() + $timeout; # Ping needs to be done by then
+ while (!$done && $timeout > 0)
+ {
+ if ($factor > 1)
{
- $nfound = select($rbits, undef, undef, $timeout); # Wait for response
- $timeout = $finish_time - time(); # Get remaining time
+ $timeout = $retrans if $timeout > $retrans;
+ $retrans*= $factor; # Exponential backoff
+ }
+ $nfound = mselect((my $rout=$rbits), undef, undef, $timeout); # Wait for response
+ my $why = $!;
+ $timeout = $finish_time - &time(); # Get remaining time
- if (!defined($nfound)) # Hmm, a strange error
- {
- $ret = undef;
- $done = 1;
+ if (!defined($nfound)) # Hmm, a strange error
+ {
+ $ret = undef;
+ $done = 1;
+ }
+ elsif ($nfound) # A packet is waiting
+ {
+ $from_msg = "";
+ $from_saddr = recv($self->{"fh"}, $from_msg, 1500, UDP_FLAGS);
+ if (!$from_saddr) {
+ # For example an unreachable host will make recv() fail.
+ if (!$self->{"econnrefused"} &&
+ ($! == ECONNREFUSED ||
+ $! == ECONNRESET)) {
+ # "Connection refused" means reachable
+ # Good, continue
+ $ret = 1;
}
- elsif ($nfound) # A packet is waiting
- {
- $from_msg = "";
- $from_saddr = recv($self->{"fh"}, $from_msg, 1500, $flags)
- or last; # For example an unreachable host will make recv() fail.
- ($from_port, $from_ip) = sockaddr_in($from_saddr);
- if (($from_ip eq $ip) && # Does the packet check out?
- ($from_port == $self->{"port_num"}) &&
- ($from_msg eq $msg))
- {
- $ret = 1; # It's a winner
- $done = 1;
- }
- }
- else # Oops, timed out
+ $done = 1;
+ } else {
+ ($from_port, $from_ip) = sockaddr_in($from_saddr);
+ if (!$source_verify ||
+ (($from_ip eq $ip) && # Does the packet check out?
+ ($from_port == $self->{"port_num"}) &&
+ ($from_msg eq $msg)))
{
- $done = 1;
+ $ret = 1; # It's a winner
+ $done = 1;
+ }
+ }
+ }
+ elsif ($timeout <= 0) # Oops, timed out
+ {
+ $done = 1;
+ }
+ else
+ {
+ # Send another in case the last one dropped
+ if (send($self->{"fh"}, $msg, UDP_FLAGS)) {
+ # Another send worked? The previous udp packet
+ # must have gotten lost or is still in transit.
+ # Hopefully this new packet will arrive safely.
+ } else {
+ if (!$self->{"econnrefused"} &&
+ $! == ECONNREFUSED) {
+ # "Connection refused" means reachable
+ # Good, continue
+ $ret = 1;
+ }
+ $done = 1;
+ }
+ }
+ }
+ return $ret;
+}
+
+# Description: Send a TCP SYN packet to host specified.
+sub ping_syn
+{
+ my $self = shift;
+ my $host = shift;
+ my $ip = shift;
+ my $start_time = shift;
+ my $stop_time = shift;
+
+ if ($syn_forking) {
+ return $self->ping_syn_fork($host, $ip, $start_time, $stop_time);
+ }
+
+ my $fh = FileHandle->new();
+ my $saddr = sockaddr_in($self->{"port_num"}, $ip);
+
+ # Create TCP socket
+ if (!socket ($fh, PF_INET, SOCK_STREAM, $self->{"proto_num"})) {
+ croak("tcp socket error - $!");
+ }
+
+ if (defined $self->{"local_addr"} &&
+ !CORE::bind($fh, sockaddr_in(0, $self->{"local_addr"}))) {
+ croak("tcp bind error - $!");
+ }
+
+ if ($self->{'device'}) {
+ setsockopt($fh, SOL_SOCKET, SO_BINDTODEVICE(), pack("Z*", $self->{'device'}))
+ or croak("error binding to device $self->{'device'} $!");
+ }
+ if ($self->{'tos'}) {
+ setsockopt($fh, SOL_IP, IP_TOS(), pack("I*", $self->{'tos'}))
+ or croak "error configuring tos to $self->{'tos'} $!";
+ }
+ # Set O_NONBLOCK property on filehandle
+ $self->socket_blocking_mode($fh, 0);
+
+ # Attempt the non-blocking connect
+ # by just sending the TCP SYN packet
+ if (connect($fh, $saddr)) {
+ # Non-blocking, yet still connected?
+ # Must have connected very quickly,
+ # or else it wasn't very non-blocking.
+ #warn "WARNING: Nonblocking connect connected anyway? ($^O)";
+ } else {
+ # Error occurred connecting.
+ if ($! == EINPROGRESS || ($^O eq 'MSWin32' && $! == EWOULDBLOCK)) {
+ # The connection is just still in progress.
+ # This is the expected condition.
+ } else {
+ # Just save the error and continue on.
+ # The ack() can check the status later.
+ $self->{"bad"}->{$host} = $!;
+ }
+ }
+
+ my $entry = [ $host, $ip, $fh, $start_time, $stop_time ];
+ $self->{"syn"}->{$fh->fileno} = $entry;
+ if ($self->{"stop_time"} < $stop_time) {
+ $self->{"stop_time"} = $stop_time;
+ }
+ vec($self->{"wbits"}, $fh->fileno, 1) = 1;
+
+ return 1;
+}
+
+sub ping_syn_fork {
+ my ($self, $host, $ip, $start_time, $stop_time) = @_;
+
+ # Buggy Winsock API doesn't allow nonblocking connect.
+ # Hence, if our OS is Windows, we need to create a separate
+ # process to do the blocking connect attempt.
+ my $pid = fork();
+ if (defined $pid) {
+ if ($pid) {
+ # Parent process
+ my $entry = [ $host, $ip, $pid, $start_time, $stop_time ];
+ $self->{"syn"}->{$pid} = $entry;
+ if ($self->{"stop_time"} < $stop_time) {
+ $self->{"stop_time"} = $stop_time;
+ }
+ } else {
+ # Child process
+ my $saddr = sockaddr_in($self->{"port_num"}, $ip);
+
+ # Create TCP socket
+ if (!socket ($self->{"fh"}, PF_INET, SOCK_STREAM, $self->{"proto_num"})) {
+ croak("tcp socket error - $!");
+ }
+
+ if (defined $self->{"local_addr"} &&
+ !CORE::bind($self->{"fh"}, sockaddr_in(0, $self->{"local_addr"}))) {
+ croak("tcp bind error - $!");
+ }
+
+ if ($self->{'device'}) {
+ setsockopt($self->{"fh"}, SOL_SOCKET, SO_BINDTODEVICE(), pack("Z*", $self->{'device'}))
+ or croak("error binding to device $self->{'device'} $!");
+ }
+ if ($self->{'tos'}) {
+ setsockopt($self->{"fh"}, SOL_IP, IP_TOS(), pack("I*", $self->{'tos'}))
+ or croak "error configuring tos to $self->{'tos'} $!";
+ }
+
+ $!=0;
+ # Try to connect (could take a long time)
+ connect($self->{"fh"}, $saddr);
+ # Notify parent of connect error status
+ my $err = $!+0;
+ my $wrstr = "$$ $err";
+ # Force to 16 chars including \n
+ $wrstr .= " "x(15 - length $wrstr). "\n";
+ syswrite($self->{"fork_wr"}, $wrstr, length $wrstr);
+ exit;
+ }
+ } else {
+ # fork() failed?
+ die "fork: $!";
+ }
+ return 1;
+}
+
+# Description: Wait for TCP ACK from host specified
+# from ping_syn above. If no host is specified, wait
+# for TCP ACK from any of the hosts in the SYN queue.
+sub ack
+{
+ my $self = shift;
+
+ if ($self->{"proto"} eq "syn") {
+ if ($syn_forking) {
+ my @answer = $self->ack_unfork(shift);
+ return wantarray ? @answer : $answer[0];
+ }
+ my $wbits = "";
+ my $stop_time = 0;
+ if (my $host = shift) {
+ # Host passed as arg
+ if (exists $self->{"bad"}->{$host}) {
+ if (!$self->{"econnrefused"} &&
+ $self->{"bad"}->{ $host } &&
+ (($! = ECONNREFUSED)>0) &&
+ $self->{"bad"}->{ $host } eq "$!") {
+ # "Connection refused" means reachable
+ # Good, continue
+ } else {
+ # ECONNREFUSED means no good
+ return ();
+ }
+ }
+ my $host_fd = undef;
+ foreach my $fd (keys %{ $self->{"syn"} }) {
+ my $entry = $self->{"syn"}->{$fd};
+ if ($entry->[0] eq $host) {
+ $host_fd = $fd;
+ $stop_time = $entry->[4]
+ || croak("Corrupted SYN entry for [$host]");
+ last;
}
+ }
+ croak("ack called on [$host] without calling ping first!")
+ unless defined $host_fd;
+ vec($wbits, $host_fd, 1) = 1;
+ } else {
+ # No $host passed so scan all hosts
+ # Use the latest stop_time
+ $stop_time = $self->{"stop_time"};
+ # Use all the bits
+ $wbits = $self->{"wbits"};
+ }
+
+ while ($wbits !~ /^\0*\z/) {
+ my $timeout = $stop_time - &time();
+ # Force a minimum of 10 ms timeout.
+ $timeout = 0.01 if $timeout <= 0.01;
+
+ my $winner_fd = undef;
+ my $wout = $wbits;
+ my $fd = 0;
+ # Do "bad" fds from $wbits first
+ while ($wout !~ /^\0*\z/) {
+ if (vec($wout, $fd, 1)) {
+ # Wipe it from future scanning.
+ vec($wout, $fd, 1) = 0;
+ if (my $entry = $self->{"syn"}->{$fd}) {
+ if ($self->{"bad"}->{ $entry->[0] }) {
+ $winner_fd = $fd;
+ last;
+ }
+ }
+ }
+ $fd++;
+ }
+
+ if (defined($winner_fd) or my $nfound = mselect(undef, ($wout=$wbits), undef, $timeout)) {
+ if (defined $winner_fd) {
+ $fd = $winner_fd;
+ } else {
+ # Done waiting for one of the ACKs
+ $fd = 0;
+ # Determine which one
+ while ($wout !~ /^\0*\z/ &&
+ !vec($wout, $fd, 1)) {
+ $fd++;
+ }
+ }
+ if (my $entry = $self->{"syn"}->{$fd}) {
+ # Wipe it from future scanning.
+ delete $self->{"syn"}->{$fd};
+ vec($self->{"wbits"}, $fd, 1) = 0;
+ vec($wbits, $fd, 1) = 0;
+ if (!$self->{"econnrefused"} &&
+ $self->{"bad"}->{ $entry->[0] } &&
+ (($! = ECONNREFUSED)>0) &&
+ $self->{"bad"}->{ $entry->[0] } eq "$!") {
+ # "Connection refused" means reachable
+ # Good, continue
+ } elsif (getpeername($entry->[2])) {
+ # Connection established to remote host
+ # Good, continue
+ } else {
+ # TCP ACK will never come from this host
+ # because there was an error connecting.
+
+ # This should set $! to the correct error.
+ my $char;
+ sysread($entry->[2],$char,1);
+ # Store the excuse why the connection failed.
+ $self->{"bad"}->{$entry->[0]} = $!;
+ if (!$self->{"econnrefused"} &&
+ (($! == ECONNREFUSED) ||
+ ($! == EAGAIN && $^O =~ /cygwin/i))) {
+ # "Connection refused" means reachable
+ # Good, continue
+ } else {
+ # No good, try the next socket...
+ next;
+ }
+ }
+ # Everything passed okay, return the answer
+ return wantarray ?
+ ($entry->[0], &time() - $entry->[3], inet_ntoa($entry->[1]))
+ : $entry->[0];
+ } else {
+ warn "Corrupted SYN entry: unknown fd [$fd] ready!";
+ vec($wbits, $fd, 1) = 0;
+ vec($self->{"wbits"}, $fd, 1) = 0;
+ }
+ } elsif (defined $nfound) {
+ # Timed out waiting for ACK
+ foreach my $fd (keys %{ $self->{"syn"} }) {
+ if (vec($wbits, $fd, 1)) {
+ my $entry = $self->{"syn"}->{$fd};
+ $self->{"bad"}->{$entry->[0]} = "Timed out";
+ vec($wbits, $fd, 1) = 0;
+ vec($self->{"wbits"}, $fd, 1) = 0;
+ delete $self->{"syn"}->{$fd};
+ }
+ }
+ } else {
+ # Weird error occurred with select()
+ warn("select: $!");
+ $self->{"syn"} = {};
+ $wbits = "";
+ }
+ }
+ }
+ return ();
+}
+
+sub ack_unfork {
+ my ($self,$host) = @_;
+ my $stop_time = $self->{"stop_time"};
+ if ($host) {
+ # Host passed as arg
+ if (my $entry = $self->{"good"}->{$host}) {
+ delete $self->{"good"}->{$host};
+ return ($entry->[0], &time() - $entry->[3], inet_ntoa($entry->[1]));
+ }
+ }
+
+ my $rbits = "";
+ my $timeout;
+
+ if (keys %{ $self->{"syn"} }) {
+ # Scan all hosts that are left
+ vec($rbits, fileno($self->{"fork_rd"}), 1) = 1;
+ $timeout = $stop_time - &time();
+ # Force a minimum of 10 ms timeout.
+ $timeout = 0.01 if $timeout < 0.01;
+ } else {
+ # No hosts left to wait for
+ $timeout = 0;
+ }
+
+ if ($timeout > 0) {
+ my $nfound;
+ while ( keys %{ $self->{"syn"} } and
+ $nfound = mselect((my $rout=$rbits), undef, undef, $timeout)) {
+ # Done waiting for one of the ACKs
+ if (!sysread($self->{"fork_rd"}, $_, 16)) {
+ # Socket closed, which means all children are done.
+ return ();
+ }
+ my ($pid, $how) = split;
+ if ($pid) {
+ # Flush the zombie
+ waitpid($pid, 0);
+ if (my $entry = $self->{"syn"}->{$pid}) {
+ # Connection attempt to remote host is done
+ delete $self->{"syn"}->{$pid};
+ if (!$how || # If there was no error connecting
+ (!$self->{"econnrefused"} &&
+ $how == ECONNREFUSED)) { # "Connection refused" means reachable
+ if ($host && $entry->[0] ne $host) {
+ # A good connection, but not the host we need.
+ # Move it from the "syn" hash to the "good" hash.
+ $self->{"good"}->{$entry->[0]} = $entry;
+ # And wait for the next winner
+ next;
+ }
+ return ($entry->[0], &time() - $entry->[3], inet_ntoa($entry->[1]));
+ }
+ } else {
+ # Should never happen
+ die "Unknown ping from pid [$pid]";
+ }
+ } else {
+ die "Empty response from status socket?";
+ }
+ }
+ if (defined $nfound) {
+ # Timed out waiting for ACK status
+ } else {
+ # Weird error occurred with select()
+ warn("select: $!");
}
- return($ret);
-}
+ }
+ if (my @synners = keys %{ $self->{"syn"} }) {
+ # Kill all the synners
+ kill 9, @synners;
+ foreach my $pid (@synners) {
+ # Wait for the deaths to finish
+ # Then flush off the zombie
+ waitpid($pid, 0);
+ }
+ }
+ $self->{"syn"} = {};
+ return ();
+}
+
+# Description: Tell why the ack() failed
+sub nack {
+ my $self = shift;
+ my $host = shift || croak('Usage> nack($failed_ack_host)');
+ return $self->{"bad"}->{$host} || undef;
+}
-# Description: Close the connection unless we are using the tcp
-# protocol, since it will already be closed.
+# Description: Close the connection.
sub close
{
- my ($self) = @_;
+ my ($self) = @_;
- $self->{"fh"}->close() unless $self->{"proto"} eq "tcp";
+ if ($self->{"proto"} eq "syn") {
+ delete $self->{"syn"};
+ } elsif ($self->{"proto"} eq "tcp") {
+ # The connection will already be closed
+ } else {
+ $self->{"fh"}->close();
+ }
}
$p->close();
$p = Net::Ping->new("icmp");
+ $p->bind($my_addr); # Specify source interface of pings
foreach $host (@host_array)
{
print "$host is ";
sleep(1);
}
$p->close();
-
+
$p = Net::Ping->new("tcp", 2);
+ # Try connecting to the www port instead of the echo port
+ $p->{port_num} = getservbyname("http", "tcp");
while ($stop_time > time())
{
print "$host not reachable ", scalar(localtime()), "\n"
sleep(300);
}
undef($p);
-
+
+ # Like tcp protocol, but with many hosts
+ $p = Net::Ping->new("syn");
+ $p->{port_num} = getservbyname("http", "tcp");
+ foreach $host (@host_array) {
+ $p->ping($host);
+ }
+ while (($host,$rtt,$ip) = $p->ack) {
+ print "HOST: $host [$ip] ACKed in $rtt seconds.\n";
+ }
+
+ # High precision syntax (requires Time::HiRes)
+ $p = Net::Ping->new();
+ $p->hires();
+ ($ret, $duration, $ip) = $p->ping($host, 5.5);
+ printf("$host [ip: $ip] is alive (packet return time: %.2f ms)\n", 1000 * $duration)
+ if $ret;
+ $p->close();
+
# For backward compatibility
print "$host is alive.\n" if pingecho($host);
parameters, a variable number of hosts may be pinged multiple
times and then the connection is closed.
-Ping supports five ping protocols, each with its own strengths
-and weaknesses. The "udp" protocol is the default. A host
-may be configured to respond to only a few of these protocols,
-or even none at all. For example, www.microsoft.com is generally
-alive but not pingable.
-
-=over 4
-
-=item icmp
-
-The C<ping()> method sends an icmp echo message to the remote host
-(this is what the UNIX ping program does).
-If the echoed message is received from the remote host and
-the echoed information is correct, the remote host is considered
-reachable. Specifying this protocol requires that the program
-be run as root or that the program be setuid to root.
+You may choose one of six different protocols to use for the
+ping. The "tcp" protocol is the default. Note that a live remote host
+may still fail to be pingable by one or more of these protocols. For
+example, www.microsoft.com is generally alive but not "icmp" pingable.
-=item udp
+With the "tcp" protocol the ping() method attempts to establish a
+connection to the remote host's echo port. If the connection is
+successfully established, the remote host is considered reachable. No
+data is actually echoed. This protocol does not require any special
+privileges but has higher overhead than the "udp" and "icmp" protocols.
-The C<ping()> method sends a udp
+Specifying the "udp" protocol causes the ping() method to send a udp
packet to the remote host's echo port. If the echoed packet is
received from the remote host and the received packet contains the
same data as the packet that was sent, the remote host is considered
reachable. This protocol does not require any special privileges.
-
-It should be borne in mind that, for both udp and tcp ping, a host
+It should be borne in mind that, for a udp ping, a host
will be reported as unreachable if it is not running the
-appropriate echo service. For Unix-like systems see L<inetd(8)> for
-more information.
+appropriate echo service. For Unix-like systems see L<inetd(8)>
+for more information.
-=item tcp
+If the "icmp" protocol is specified, the ping() method sends an icmp
+echo message to the remote host, which is what the UNIX ping program
+does. If the echoed message is received from the remote host and
+the echoed information is correct, the remote host is considered
+reachable. Specifying the "icmp" protocol requires that the program
+be run as root or that the program be setuid to root.
-The C<ping()> method attempts to establish a
-connection to the remote host's echo port. If the connection is
-successfully established, the remote host is considered reachable.
-Once the connection is made, it is torn down immediately -- no data
-is actually echoed. This protocol does not require any special
-privileges but has highest overhead of the protocols.
-
-=item stream
-
-This is just like the tcp protocol, except that once it establishes
-the tcp connection, it keeps it up. Each subsequent ping
-request re-uses the existing connection. stream
-provides better performance than tcp since the connection
-doesn't need to be created and torn down with every ping. It is
-also the only protocol that will recognize that the original host is
-gone, even if it is immediately replaced by an
-identical host responding in exactly the same way. The drawback
-is that you can only ping one host per Ping instance. You will get
-an error if you neglect to call C<close()> before trying to ping
-a different network device.
-
-=item external
-
-The ping() method attempts to use the C<Net::Ping::External> module to ping
-the remote host. C<Net::Ping::External> interfaces with your system's default
-L<ping(8)> utility to perform the ping, and generally produces relatively
+If the "external" protocol is specified, the ping() method attempts to
+use the C<Net::Ping::External> module to ping the remote host.
+C<Net::Ping::External> interfaces with your system's default C<ping>
+utility to perform the ping, and generally produces relatively
accurate results. If C<Net::Ping::External> if not installed on your
system, specifying the "external" protocol will result in an error.
+If the "syn" protocol is specified, the ping() method will only
+send a TCP SYN packet to the remote host then immediately return.
+If the syn packet was sent successfully, it will return a true value,
+otherwise it will return false. NOTE: Unlike the other protocols,
+the return value does NOT determine if the remote host is alive or
+not since the full TCP three-way handshake may not have completed
+yet. The remote host is only considered reachable if it receives
+a TCP ACK within the timeout specifed. To begin waiting for the
+ACK packets, use the ack() method as explained below. Use the
+"syn" protocol instead the "tcp" protocol to determine reachability
+of multiple destinations simultaneously by sending parallel TCP
+SYN packets. It will not block while testing each remote host.
+demo/fping is provided in this distribution to demonstrate the
+"syn" protocol as an example.
+This protocol does not require any special privileges.
+
=head2 Functions
=over 4
-=item Net::Ping->new([$proto [, $def_timeout [, $bytes]]]);
+=item Net::Ping->new([$proto [, $def_timeout [, $bytes [, $device [, $tos ]]]]]);
Create a new ping object. All of the parameters are optional. $proto
specifies the protocol to use when doing a ping. The current choices
-are "tcp", "udp" or "icmp". The default is "udp".
+are "tcp", "udp", "icmp", "stream", "syn", or "external".
+The default is "tcp".
If a default timeout ($def_timeout) in seconds is provided, it is used
when a timeout is not given to the ping() method (below). The timeout
otherwise. The maximum number of data bytes that can be specified is
1024.
+If $device is given, this device is used to bind the source endpoint
+before sending the ping packet. I beleive this only works with
+superuser privileges and with udp and icmp protocols at this time.
+
+If $tos is given, this ToS is configured into the soscket.
+
=item $p->ping($host [, $timeout]);
Ping the remote host and wait for a response. $host can be either the
hostname or the IP number of the remote host. The optional timeout
must be greater than 0 seconds and defaults to whatever was specified
-when the ping object was created. If the hostname cannot be found or
-there is a problem with the IP number, undef is returned. Otherwise,
-1 is returned if the host is reachable and 0 if it is not. For all
-practical purposes, undef and 0 and can be treated as the same case.
+when the ping object was created. Returns a success flag. If the
+hostname cannot be found or there is a problem with the IP number, the
+success flag returned will be undef. Otherwise, the success flag will
+be 1 if the host is reachable and 0 if it is not. For most practical
+purposes, undef and 0 and can be treated as the same case. In array
+context, the elapsed time as well as the string form of the ip the
+host resolved to are also returned. The elapsed time value will
+be a float, as retuned by the Time::HiRes::time() function, if hires()
+has been previously called, otherwise it is returned as an integer.
+
+=item $p->source_verify( { 0 | 1 } );
+
+Allows source endpoint verification to be enabled or disabled.
+This is useful for those remote destinations with multiples
+interfaces where the response may not originate from the same
+endpoint that the original destination endpoint was sent to.
+This only affects udp and icmp protocol pings.
+
+This is enabled by default.
+
+=item $p->service_check( { 0 | 1 } );
+
+Set whether or not the connect behavior should enforce
+remote service availability as well as reachability. Normally,
+if the remote server reported ECONNREFUSED, it must have been
+reachable because of the status packet that it reported.
+With this option enabled, the full three-way tcp handshake
+must have been established successfully before it will
+claim it is reachable. NOTE: It still does nothing more
+than connect and disconnect. It does not speak any protocol
+(i.e., HTTP or FTP) to ensure the remote server is sane in
+any way. The remote server CPU could be grinding to a halt
+and unresponsive to any clients connecting, but if the kernel
+throws the ACK packet, it is considered alive anyway. To
+really determine if the server is responding well would be
+application specific and is beyond the scope of Net::Ping.
+For udp protocol, enabling this option demands that the
+remote server replies with the same udp data that it was sent
+as defined by the udp echo service.
+
+This affects the "udp", "tcp", and "syn" protocols.
+
+This is disabled by default.
+
+=item $p->tcp_service_check( { 0 | 1 } );
+
+Depricated method, but does the same as service_check() method.
+
+=item $p->hires( { 0 | 1 } );
+
+Causes this module to use Time::HiRes module, allowing milliseconds
+to be returned by subsequent calls to ping().
+
+This is disabled by default.
+
+=item $p->bind($local_addr);
+
+Sets the source address from which pings will be sent. This must be
+the address of one of the interfaces on the local host. $local_addr
+may be specified as a hostname or as a text IP address such as
+"192.168.1.1".
+
+If the protocol is set to "tcp", this method may be called any
+number of times, and each call to the ping() method (below) will use
+the most recent $local_addr. If the protocol is "icmp" or "udp",
+then bind() must be called at most once per object, and (if it is
+called at all) must be called before the first call to ping() for that
+object.
=item $p->open($host);
-When you are using the stream protocol, this call pre-opens the
+When you are using the "stream" protocol, this call pre-opens the
tcp socket. It's only necessary to do this if you want to
provide a different timeout when creating the connection, or
remove the overhead of establishing the connection from the
first ping. If you don't call C<open()>, the connection is
-automatically openeed the first time C<ping()> is called.
+automatically opened the first time C<ping()> is called.
This call simply does nothing if you are using any protocol other
than stream.
+=item $p->ack( [ $host ] );
+
+When using the "syn" protocol, use this method to determine
+the reachability of the remote host. This method is meant
+to be called up to as many times as ping() was called. Each
+call returns the host (as passed to ping()) that came back
+with the TCP ACK. The order in which the hosts are returned
+may not necessarily be the same order in which they were
+SYN queued using the ping() method. If the timeout is
+reached before the TCP ACK is received, or if the remote
+host is not listening on the port attempted, then the TCP
+connection will not be established and ack() will return
+undef. In list context, the host, the ack time, and the
+dotted ip string will be returned instead of just the host.
+If the optional $host argument is specified, the return
+value will be partaining to that host only.
+This call simply does nothing if you are using any protocol
+other than syn.
+
+=item $p->nack( $failed_ack_host );
+
+The reason that host $failed_ack_host did not receive a
+valid ACK. Useful to find out why when ack( $fail_ack_host )
+returns a false value.
+
=item $p->close();
Close the network connection for this ping object. The network
separate module to be written which understands all of the different
kinds of ICMP packets.
+=head1 INSTALL
+
+The latest source tree is available via cvs:
+
+ cvs -z3 -q -d :pserver:anonymous@cvs.roobik.com.:/usr/local/cvsroot/freeware checkout Net-Ping
+ cd Net-Ping
+
+The tarball can be created as follows:
+
+ perl Makefile.PL ; make ; make dist
+
+The latest Net::Ping release can be found at CPAN:
+
+ $CPAN/modules/by-module/Net/
+
+1) Extract the tarball
+
+ gtar -zxvf Net-Ping-xxxx.tar.gz
+ cd Net-Ping-xxxx
+
+2) Build:
+
+ make realclean
+ perl Makefile.PL
+ make
+ make test
+
+3) Install
+
+ make install
+
+Or install it RPM Style:
+
+ rpm -ta SOURCES/Net-Ping-xxxx.tar.gz
+
+ rpm -ih RPMS/noarch/perl-Net-Ping-xxxx.rpm
+
+=head1 BUGS
+
+For a list of known issues, visit:
+
+https://rt.cpan.org/NoAuth/Bugs.html?Dist=Net-Ping
+
+To report a new bug, visit:
+
+https://rt.cpan.org/NoAuth/ReportBug.html?Queue=Net-Ping
+
+=head1 AUTHORS
+
+ Current maintainer:
+ bbb@cpan.org (Rob Brown)
+
+ External protocol:
+ colinm@cpan.org (Colin McMillen)
+
+ Stream protocol:
+ bronson@trestle.com (Scott Bronson)
+
+ Original pingecho():
+ karrer@bernina.ethz.ch (Andreas Karrer)
+ pmarquess@bfsec.bt.co.uk (Paul Marquess)
+
+ Original Net::Ping author:
+ mose@ns.ccsn.edu (Russell Mosemann)
+
+=head1 COPYRIGHT
+
+Copyright (c) 2002-2003, Rob Brown. All rights reserved.
+
+Copyright (c) 2001, Colin McMillen. All rights reserved.
+
+This program is free software; you may redistribute it and/or
+modify it under the same terms as Perl itself.
+
+$Id: Ping.pm,v 1.86 2003/06/27 21:31:07 rob Exp $
+
=cut