}
use strict;
-use Test::More tests => 17;
+use Config;
+use ExtUtils::MakeMaker;
+
+use Test::More tests => 79;
use MakeMaker::Test::Utils;
+use MakeMaker::Test::Setup::BFD;
+use File::Find;
use File::Spec;
-use TieOut;
+use File::Path;
my $perl = which_perl();
+my $Is_VMS = $^O eq 'VMS';
-my $root_dir = 't';
-
-if( $^O eq 'VMS' ) {
- # On older systems we might exceed the 8-level directory depth limit
- # imposed by RMS. We get around this with a rooted logical, but we
- # can't create logical names with attributes in Perl, so we do it
- # in a DCL subprocess and put it in the job table so the parent sees it.
- open( BFDTMP, '>bfdtesttmp.com' ) || die "Error creating command file; $!";
- print BFDTMP <<'COMMAND';
-$ IF F$TRNLNM("PERL_CORE") .EQS. "" .AND. F$TYPE(PERL_CORE) .EQS. ""
-$ THEN
-$! building CPAN version
-$ BFD_TEST_ROOT = F$PARSE("SYS$DISK:[]",,,,"NO_CONCEAL")-".][000000"-"]["-"].;"+".]"
-$ ELSE
-$! we're in the core
-$ BFD_TEST_ROOT = F$PARSE("SYS$DISK:[-]",,,,"NO_CONCEAL")-".][000000"-"]["-"].;"+".]"
-$ ENDIF
-$ DEFINE/JOB/NOLOG/TRANSLATION=CONCEALED BFD_TEST_ROOT 'BFD_TEST_ROOT'
-COMMAND
- close BFDTMP;
-
- system '@bfdtesttmp.com';
- END { 1 while unlink 'bfdtesttmp.com' }
- $root_dir = 'BFD_TEST_ROOT:[t]';
-}
-
-chdir $root_dir;
-
+chdir 't';
perl_lib;
$| = 1;
-ok( chdir 'Big-Dummy', "chdir'd to Big-Dummy" ) ||
+ok( setup_recurs(), 'setup' );
+END {
+ ok( chdir File::Spec->updir );
+ ok( teardown_recurs(), 'teardown' );
+}
+
+ok( chdir('Big-Dummy'), "chdir'd to Big-Dummy" ) ||
diag("chdir failed: $!");
-my @mpl_out = `$perl Makefile.PL PREFIX=dummy-install`;
+my @mpl_out = run(qq{$perl Makefile.PL "PREFIX=../dummy-install"});
+END { rmtree '../dummy-install'; }
cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) ||
diag(@mpl_out);
{
# Supress 'make manifest' noise
local $ENV{PERL_MM_MANIFEST_VERBOSE} = 0;
- my $manifest_out = `$make manifest`;
+ my $manifest_out = run("$make manifest");
ok( -e 'MANIFEST', 'make manifest created a MANIFEST' );
ok( -s 'MANIFEST', ' its not empty' );
}
END { unlink 'MANIFEST'; }
-my $test_out = `$make test`;
+
+my $ppd_out = run("$make ppd");
+is( $?, 0, ' exited normally' ) || diag $ppd_out;
+ok( open(PPD, 'Big-Dummy.ppd'), ' .ppd file generated' );
+my $ppd_html;
+{ local $/; $ppd_html = <PPD> }
+close PPD;
+like( $ppd_html, qr{^<SOFTPKG NAME="Big-Dummy" VERSION="0.01">}m,
+ ' <SOFTPKG>' );
+like( $ppd_html, qr{^\s*<ABSTRACT>Try "our" hot dog's</ABSTRACT>}m,
+ ' <ABSTRACT>');
+like( $ppd_html,
+ qr{^\s*<AUTHOR>Michael G Schwern <schwern\@pobox.com></AUTHOR>}m,
+ ' <AUTHOR>' );
+like( $ppd_html, qr{^\s*<IMPLEMENTATION>}m, ' <IMPLEMENTATION>');
+like( $ppd_html, qr{^\s*<REQUIRE NAME="strict::" />}m, ' <REQUIRE>' );
+
+my $archname = $Config{archname};
+if( $] >= 5.008 ) {
+ # XXX This is a copy of the internal logic, so it's not a great test
+ $archname .= "-$Config{PERL_REVISION}.$Config{PERL_VERSION}";
+}
+like( $ppd_html, qr{^\s*<ARCHITECTURE NAME="$archname" />}m,
+ ' <ARCHITECTURE>');
+like( $ppd_html, qr{^\s*<CODEBASE HREF="" />}m, ' <CODEBASE>');
+like( $ppd_html, qr{^\s*</IMPLEMENTATION>}m, ' </IMPLEMENTATION>');
+like( $ppd_html, qr{^\s*</SOFTPKG>}m, ' </SOFTPKG>');
+END { unlink 'Big-Dummy.ppd' }
+
+
+my $test_out = run("$make test");
like( $test_out, qr/All tests successful/, 'make test' );
-is( $?, 0 );
+is( $?, 0, ' exited normally' ) ||
+ diag $test_out;
# Test 'make test TEST_VERBOSE=1'
my $make_test_verbose = make_macro($make, 'test', TEST_VERBOSE => 1);
-$test_out = `$make_test_verbose`;
+$test_out = run("$make_test_verbose");
like( $test_out, qr/ok \d+ - TEST_VERBOSE/, 'TEST_VERBOSE' );
-like( $test_out, qr/All tests successful/, ' successful' );
-is( $?, 0 );
+like( $test_out, qr/All tests successful/, ' successful' );
+is( $?, 0, ' exited normally' ) ||
+ diag $test_out;
+
+
+my $install_out = run("$make install");
+is( $?, 0, 'install' ) || diag $install_out;
+like( $install_out, qr/^Installing /m );
+
+ok( -r '../dummy-install', ' install dir created' );
+my %files = ();
+find( sub {
+ # do it case-insensitive for non-case preserving OSs
+ my $file = lc $_;
+
+ # VMS likes to put dots on the end of things that don't have them.
+ $file =~ s/\.$// if $Is_VMS;
+
+ $files{$file} = $File::Find::name;
+}, '../dummy-install' );
+ok( $files{'dummy.pm'}, ' Dummy.pm installed' );
+ok( $files{'liar.pm'}, ' Liar.pm installed' );
+ok( $files{'program'}, ' program installed' );
+ok( $files{'.packlist'}, ' packlist created' );
+ok( $files{'perllocal.pod'},' perllocal.pod created' );
+
+
+SKIP: {
+ skip 'VMS install targets do not preserve $(PREFIX)', 8 if $Is_VMS;
+
+ $install_out = run("$make install PREFIX=elsewhere");
+ is( $?, 0, 'install with PREFIX override' ) || diag $install_out;
+ like( $install_out, qr/^Installing /m );
+
+ ok( -r 'elsewhere', ' install dir created' );
+ %files = ();
+ find( sub { $files{$_} = $File::Find::name; }, 'elsewhere' );
+ ok( $files{'Dummy.pm'}, ' Dummy.pm installed' );
+ ok( $files{'Liar.pm'}, ' Liar.pm installed' );
+ ok( $files{'program'}, ' program installed' );
+ ok( $files{'.packlist'}, ' packlist created' );
+ ok( $files{'perllocal.pod'},' perllocal.pod created' );
+ rmtree('elsewhere');
+}
+
+
+SKIP: {
+ skip 'VMS install targets do not preserve $(DESTDIR)', 10 if $Is_VMS;
+
+ $install_out = run("$make install PREFIX= DESTDIR=other");
+ is( $?, 0, 'install with DESTDIR' ) ||
+ diag $install_out;
+ like( $install_out, qr/^Installing /m );
+
+ ok( -d 'other', ' destdir created' );
+ %files = ();
+ my $perllocal;
+ find( sub {
+ $files{$_} = $File::Find::name;
+ }, 'other' );
+ ok( $files{'Dummy.pm'}, ' Dummy.pm installed' );
+ ok( $files{'Liar.pm'}, ' Liar.pm installed' );
+ ok( $files{'program'}, ' program installed' );
+ ok( $files{'.packlist'}, ' packlist created' );
+ ok( $files{'perllocal.pod'},' perllocal.pod created' );
+
+ ok( open(PERLLOCAL, $files{'perllocal.pod'} ) ) ||
+ diag("Can't open $files{'perllocal.pod'}: $!");
+ { local $/;
+ unlike(<PERLLOCAL>, qr/other/, 'DESTDIR should not appear in perllocal');
+ }
+ close PERLLOCAL;
+
+# TODO not available in the min version of Test::Harness we require
+# ok( open(PACKLIST, $files{'.packlist'} ) ) ||
+# diag("Can't open $files{'.packlist'}: $!");
+# { local $/;
+# local $TODO = 'DESTDIR still in .packlist';
+# unlike(<PACKLIST>, qr/other/, 'DESTDIR should not appear in .packlist');
+# }
+# close PACKLIST;
+
+ rmtree('other');
+}
+
+
+SKIP: {
+ skip 'VMS install targets do not preserve $(PREFIX)', 9 if $Is_VMS;
+
+ $install_out = run("$make install PREFIX=elsewhere DESTDIR=other/");
+ is( $?, 0, 'install with PREFIX override and DESTDIR' ) ||
+ diag $install_out;
+ like( $install_out, qr/^Installing /m );
+
+ ok( !-d 'elsewhere', ' install dir not created' );
+ ok( -d 'other/elsewhere', ' destdir created' );
+ %files = ();
+ find( sub { $files{$_} = $File::Find::name; }, 'other/elsewhere' );
+ ok( $files{'Dummy.pm'}, ' Dummy.pm installed' );
+ ok( $files{'Liar.pm'}, ' Liar.pm installed' );
+ ok( $files{'program'}, ' program installed' );
+ ok( $files{'.packlist'}, ' packlist created' );
+ ok( $files{'perllocal.pod'},' perllocal.pod created' );
+ rmtree('other');
+}
-my $dist_test_out = `$make disttest`;
+
+my $dist_test_out = run("$make disttest");
is( $?, 0, 'disttest' ) || diag($dist_test_out);
+# Test META.yml generation
+use ExtUtils::Manifest qw(maniread);
+
+my $distdir = 'Big-Dummy-0.01';
+$distdir =~ s/\./_/g if $Is_VMS;
+my $meta_yml = "$distdir/META.yml";
+
+ok( !-f 'META.yml', 'META.yml not written to source dir' );
+ok( -f $meta_yml, 'META.yml written to dist dir' );
+ok( !-e "META_new.yml", 'temp META.yml file not left around' );
+
+SKIP: {
+ # META.yml spec 1.4 was added in 0.11
+ skip "Test::YAML::Meta >= 0.11 required", 2
+ unless eval { require Test::YAML::Meta } and
+ Test::YAML::Meta->VERSION >= 0.11;
+
+ Test::YAML::Meta::meta_spec_ok($meta_yml);
+}
+
+ok open META, $meta_yml or diag $!;
+my $meta = join '', <META>;
+ok close META;
+
+is $meta, <<"END";
+--- #YAML:1.0
+name: Big-Dummy
+version: 0.01
+abstract: Try "our" hot dog's
+author:
+ - Michael G Schwern <schwern\@pobox.com>
+license: unknown
+distribution_type: module
+configure_requires:
+ ExtUtils::MakeMaker: 0
+build_requires:
+ ExtUtils::MakeMaker: 0
+requires:
+ strict: 0
+no_index:
+ directory:
+ - t
+ - inc
+generated_by: ExtUtils::MakeMaker version $ExtUtils::MakeMaker::VERSION
+meta-spec:
+ url: http://module-build.sourceforge.net/META-spec-v1.4.html
+ version: 1.4
+END
+
+my $manifest = maniread("$distdir/MANIFEST");
+# VMS is non-case preserving, so we can't know what the MANIFEST will
+# look like. :(
+_normalize($manifest);
+is( $manifest->{'meta.yml'}, 'Module meta-data (added by MakeMaker)' );
+
+
+# Test NO_META META.yml suppression
+unlink $meta_yml;
+ok( !-f $meta_yml, 'META.yml deleted' );
+@mpl_out = run(qq{$perl Makefile.PL "NO_META=1"});
+cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) || diag(@mpl_out);
+my $distdir_out = run("$make distdir");
+is( $?, 0, 'distdir' ) || diag($distdir_out);
+ok( !-f $meta_yml, 'META.yml generation suppressed by NO_META' );
+
# Make sure init_dirscan doesn't go into the distdir
-@mpl_out = `$perl Makefile.PL "PREFIX=dummy-install"`;
+@mpl_out = run(qq{$perl Makefile.PL "PREFIX=../dummy-install"});
-cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) ||
- diag(@mpl_out);
+cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) || diag(@mpl_out);
-ok( grep(/^Writing $makefile for Big::Dummy/,
- @mpl_out) == 1,
+ok( grep(/^Writing $makefile for Big::Dummy/, @mpl_out) == 1,
'init_dirscan skipped distdir') ||
diag(@mpl_out);
# I know we'll get ignored errors from make here, that's ok.
# Send STDERR off to oblivion.
open(SAVERR, ">&STDERR") or die $!;
-open(STDERR, ">".File::Spec->devnull) or die $!;
+open(STDERR, ">",File::Spec->devnull) or die $!;
-my $realclean_out = `$make realclean`;
+my $realclean_out = run("$make realclean");
is( $?, 0, 'realclean' ) || diag($realclean_out);
open(STDERR, ">&SAVERR") or die $!;
close SAVERR;
+
+
+sub _normalize {
+ my $hash = shift;
+
+ while(my($k,$v) = each %$hash) {
+ delete $hash->{$k};
+ $hash->{lc $k} = $v;
+ }
+}