-BEGIN {require 5.004;}
-
package ExtUtils::MakeMaker;
-$VERSION = "5.90_01";
-$Version_OK = "5.49"; # Makefiles older than $Version_OK will die
- # (Will be checked from MakeMaker version 4.13 onwards)
-($Revision = substr(q$Revision: 1.37 $, 10)) =~ s/\s+$//;
+BEGIN {require 5.005_03;}
+
+$VERSION = '6.21_01';
+($Revision) = q$Revision: 1.145 $ =~ /Revision:\s+(\S+)/;
require Exporter;
use Config;
use Carp ();
+use File::Path;
use vars qw(
@ISA @EXPORT @EXPORT_OK
- $ISA_TTY $Revision $VERSION $Verbose $Version_OK %Config
- %Keep_after_flush %MM_Sections @Prepend_parent
+ $Revision $VERSION $Verbose %Config
+ @Prepend_parent @Parent
%Recognized_Att_Keys @Get_from_Config @MM_Sections @Overridable
- @Parent $PACKNAME
+ $Filename
);
use strict;
my $Is_VMS = $^O eq 'VMS';
my $Is_Win32 = $^O eq 'MSWin32';
+# Our filename for diagnostic and debugging purposes. More reliable
+# than %INC (think caseless filesystems)
+$Filename = __FILE__;
+
full_setup();
require ExtUtils::MM; # Things like CPAN assume loading ExtUtils::MakeMaker
# will give them MM.
+require ExtUtils::MY; # XXX pre-5.8 versions of ExtUtils::Embed expect
+ # loading ExtUtils::MakeMaker will give them MY.
+ # This will go when Embed is it's own CPAN module.
+
sub WriteMakefile {
Carp::croak "WriteMakefile: Need even number of args" if @_ % 2;
require ExtUtils::MY;
my %att = @_;
+
+ _verify_att(\%att);
+
my $mm = MM->new(\%att);
$mm->flush;
return $mm;
}
+
+# Basic signatures of the attributes WriteMakefile takes. Each is the
+# reference type. Empty value indicate it takes a non-reference
+# scalar.
+my %Att_Sigs;
+my %Special_Sigs = (
+ C => 'array',
+ CONFIG => 'array',
+ CONFIGURE => 'code',
+ DIR => 'array',
+ DL_FUNCS => 'hash',
+ DL_VARS => 'array',
+ EXCLUDE_EXT => 'array',
+ EXE_FILES => 'array',
+ FUNCLIST => 'array',
+ H => 'array',
+ IMPORTS => 'hash',
+ INCLUDE_EXT => 'array',
+ LIBS => ['array',''],
+ MAN1PODS => 'hash',
+ MAN3PODS => 'hash',
+ PL_FILES => 'hash',
+ PM => 'hash',
+ PMLIBDIRS => 'array',
+ PREREQ_PM => 'hash',
+ SKIP => 'array',
+ TYPEMAPS => 'array',
+ XS => 'hash',
+ _KEEP_AFTER_FLUSH => '',
+
+ clean => 'hash',
+ depend => 'hash',
+ dist => 'hash',
+ dynamic_lib=> 'hash',
+ linkext => 'hash',
+ macro => 'hash',
+ postamble => 'hash',
+ realclean => 'hash',
+ test => 'hash',
+ tool_autosplit => 'hash',
+);
+
+@Att_Sigs{keys %Recognized_Att_Keys} = ('') x keys %Recognized_Att_Keys;
+@Att_Sigs{keys %Special_Sigs} = values %Special_Sigs;
+
+
+sub _verify_att {
+ my($att) = @_;
+
+ while( my($key, $val) = each %$att ) {
+ my $sig = $Att_Sigs{$key};
+ unless( defined $sig ) {
+ warn "WARNING: $key is not a known parameter.\n";
+ next;
+ }
+
+ my @sigs = ref $sig ? @$sig : $sig;
+ my $given = lc ref $val;
+ unless( grep $given eq $_, @sigs ) {
+ my $takes = join " or ", map { $_ ne '' ? "$_ reference"
+ : "string/number"
+ } @sigs;
+ my $has = $given ne '' ? "$given reference"
+ : "string/number";
+ warn "WARNING: $key takes a $takes not a $has.\n".
+ " Please inform the author.\n";
+ }
+ }
+}
+
sub prompt ($;$) {
- my($mess,$def)=@_;
- $ISA_TTY = -t STDIN && (-t STDOUT || !(-f STDOUT || -c STDOUT)) ; # Pipe?
+ my($mess, $def) = @_;
Carp::confess("prompt function called without an argument")
unless defined $mess;
+
+ my $isa_tty = -t STDIN && (-t STDOUT || !(-f STDOUT || -c STDOUT)) ;
+
my $dispdef = defined $def ? "[$def] " : " ";
$def = defined $def ? $def : "";
- my $ans;
+
local $|=1;
local $\;
print "$mess $dispdef";
- if ($ISA_TTY && !$ENV{PERL_MM_USE_DEFAULT}) {
+
+ my $ans;
+ if ($ENV{PERL_MM_USE_DEFAULT} || (!$isa_tty && eof STDIN)) {
+ print "$def\n";
+ }
+ else {
$ans = <STDIN>;
if( defined $ans ) {
chomp $ans;
print "\n";
}
}
- else {
- print "$def\n";
- }
+
return (!defined $ans || $ans eq '') ? $def : $ans;
}
sub eval_in_subdirs {
my($self) = @_;
use Cwd qw(cwd abs_path);
- my $pwd = cwd();
+ my $pwd = cwd() || die "Can't figure out your cwd!";
+
local @INC = map eval {abs_path($_) if -e} || $_, @INC;
push @INC, '.'; # '.' has to always be at the end of @INC
foreach my $dir (@{$self->{DIR}}){
my($abs) = $self->catdir($pwd,$dir);
- $self->eval_in_x($abs);
+ eval { $self->eval_in_x($abs); };
+ last if $@;
}
chdir $pwd;
+ die $@ if $@;
}
sub eval_in_x {
# } else {
# warn "WARNING from evaluation of $dir/Makefile.PL: $@";
# }
- warn "WARNING from evaluation of $dir/Makefile.PL: $@";
+ die "ERROR from evaluation of $dir/Makefile.PL: $@";
}
}
+
+# package name for the classes into which the first object will be blessed
+my $PACKNAME = 'PACK000';
+
sub full_setup {
$Verbose ||= 0;
- # package name for the classes into which the first object will be blessed
- $PACKNAME = "PACK000";
-
my @attrib_help = qw/
AUTHOR ABSTRACT ABSTRACT_FROM BINARY_LOCATION
C CAPI CCFLAGS CONFIG CONFIGURE DEFINE DIR DISTNAME DL_FUNCS DL_VARS
- EXCLUDE_EXT EXE_FILES FIRST_MAKEFILE
+ EXCLUDE_EXT EXE_FILES FIRST_MAKEFILE
FULLPERL FULLPERLRUN FULLPERLRUNINST
FUNCLIST H IMPORTS
- INST_ARCHLIB INST_SCRIPT INST_BIN INST_LIB
+
+ INST_ARCHLIB INST_SCRIPT INST_BIN INST_LIB INST_MAN1DIR INST_MAN3DIR
INSTALLDIRS
- PREFIX SITEPREFIX VENDORPREFIX
+ DESTDIR PREFIX
+ PERLPREFIX SITEPREFIX VENDORPREFIX
INSTALLPRIVLIB INSTALLSITELIB INSTALLVENDORLIB
INSTALLARCHLIB INSTALLSITEARCH INSTALLVENDORARCH
- INSTALLBIN INSTALLSITEBIN INSTALLVENDORBIN INSTALLSCRIPT
+ INSTALLBIN INSTALLSITEBIN INSTALLVENDORBIN
+ INSTALLMAN1DIR INSTALLMAN3DIR
+ INSTALLSITEMAN1DIR INSTALLSITEMAN3DIR
+ INSTALLVENDORMAN1DIR INSTALLVENDORMAN3DIR
+ INSTALLSCRIPT
PERL_LIB PERL_ARCHLIB
SITELIBEXP SITEARCHEXP
+
INC INCLUDE_EXT LDFROM LIB LIBPERL_A LIBS
- LINKTYPE MAKEAPERL MAKEFILE MAN1PODS MAN3PODS MAP_TARGET MYEXTLIB
- PERL_MALLOC_OK
- NAME NEEDS_LINKING NOECHO NORECURS NO_VC OBJECT OPTIMIZE PERL PERLMAINCC
- PERLRUN PERLRUNINST PERL_CORE
+ LINKTYPE MAKEAPERL MAKEFILE MAKEFILE_OLD MAN1PODS MAN3PODS MAP_TARGET
+ MYEXTLIB NAME NEEDS_LINKING NOECHO NO_META NORECURS NO_VC OBJECT OPTIMIZE
+ PERL_MALLOC_OK PERL PERLMAINCC PERLRUN PERLRUNINST PERL_CORE
PERL_SRC PERM_RW PERM_RWX
PL_FILES PM PM_FILTER PMLIBDIRS POLLUTE PPM_INSTALL_EXEC
PPM_INSTALL_SCRIPT PREREQ_FATAL PREREQ_PM PREREQ_PRINT PRINT_PREREQ
- SKIP TYPEMAPS VERSION VERSION_FROM XS XSOPT XSPROTOARG
+ SIGN SKIP TYPEMAPS VERSION VERSION_FROM XS XSOPT XSPROTOARG
XS_VERSION clean depend dist dynamic_lib linkext macro realclean
tool_autosplit
+
MACPERL_SRC MACPERL_LIB MACLIBS_68K MACLIBS_PPC MACLIBS_SC MACLIBS_MRC
MACLIBS_ALL_68K MACLIBS_ALL_PPC MACLIBS_SHARED
/;
@MM_Sections =
qw(
- post_initialize const_config constants tool_autosplit tool_xsubpp
- tools_other dist macro depend cflags const_loadlibs const_cccmd
+ post_initialize const_config constants platform_constants
+ tool_autosplit tool_xsubpp tools_other
+
+ makemakerdflt
+
+ dist macro depend cflags const_loadlibs const_cccmd
post_constants
pasthru
- c_o xs_c xs_o top_targets linkext dlsyms dynamic dynamic_bs
+ special_targets
+ c_o xs_c xs_o
+ top_targets blibdirs linkext dlsyms dynamic dynamic_bs
dynamic_lib static static_lib manifypods processPL
installbin subdirs
- clean realclean dist_basics dist_core dist_dir dist_test dist_ci
+ clean_subdirs clean realclean_subdirs realclean
+ metafile metafile_addtomanifest
+ signature signature_addtomanifest
+ dist_basics dist_core distdir dist_test dist_ci
install force perldepend makefile staticmake test ppd
); # loses section ordering
@Overridable = @MM_Sections;
push @Overridable, qw[
- dir_target libscan makeaperl needs_linking perm_rw perm_rwx
+ libscan makeaperl needs_linking perm_rw perm_rwx
subdir_x test_via_harness test_via_script init_PERL
];
exe_ext full_ar
);
+ # 5.5.3 doesn't have any concept of vendor libs
+ push @Get_from_Config, qw( vendorarchexp vendorlibexp ) if $] >= 5.006;
+
foreach my $item (@attrib_help){
$Recognized_Att_Keys{$item} = 1;
}
MAP_TARGET INST_MAN1DIR INST_MAN3DIR PERL_SRC
PERL FULLPERL
);
-
- my @keep = qw/
- NEEDS_LINKING HAS_LINK_CODE
- /;
- @Keep_after_flush{@keep} = (1) x @keep;
}
sub writeMakefile {
my($class,$self) = @_;
my($key);
+ # Store the original args passed to WriteMakefile()
+ foreach my $k (keys %$self) {
+ $self->{ARGS}{$k} = $self->{$k};
+ }
+
if ("@ARGV" =~ /\bPREREQ_PRINT\b/) {
require Data::Dumper;
print Data::Dumper->Dump([$self->{PREREQ_PM}], [qw(PREREQ_PM)]);
+ exit 0;
}
# PRINT_PREREQ is RedHatism.
if ("@ARGV" =~ /\bPRINT_PREREQ\b/) {
- print join(" ", map { "perl($_)>=$self->{PREREQ_PM}->{$_} " } sort keys %{$self->{PREREQ_PM}}), "\n";
+ print join(" ", map { "perl($_)>=$self->{PREREQ_PM}->{$_} " }
+ sort keys %{$self->{PREREQ_PM}}), "\n";
exit 0;
}
my(%unsatisfied) = ();
foreach my $prereq (sort keys %{$self->{PREREQ_PM}}) {
- eval "require $prereq";
+ # 5.8.0 has a bug with require Foo::Bar alone in an eval, so an
+ # extra statement is a workaround.
+ my $file = "$prereq.pm";
+ $file =~ s{::}{/}g;
+ eval { require $file };
my $pr_version = $prereq->VERSION || 0;
+ # convert X.Y_Z alpha version #s to X.YZ for easier comparisons
+ $pr_version =~ s/(\d+)\.(\d+)_(\d+)/$1.$2$3/;
+
if ($@) {
warn sprintf "Warning: prerequisite %s %s not found.\n",
$prereq, $self->{PREREQ_PM}{$prereq}
unless $self->{PREREQ_FATAL};
$unsatisfied{$prereq} = 'not installed';
} elsif ($pr_version < $self->{PREREQ_PM}->{$prereq} ){
- warn "Warning: prerequisite %s %s not found. We have %s.\n",
+ warn sprintf "Warning: prerequisite %s %s not found. We have %s.\n",
$prereq, $self->{PREREQ_PM}{$prereq},
($pr_version || 'unknown version')
unless $self->{PREREQ_FATAL};
my $key;
for $key (@Prepend_parent) {
next unless defined $self->{PARENT}{$key};
+
+ # Don't stomp on WriteMakefile() args.
+ next if defined $self->{ARGS}{$key} and
+ $self->{ARGS}{$key} eq $self->{$key};
+
$self->{$key} = $self->{PARENT}{$key};
- unless ($^O eq 'VMS' && $key =~ /PERL$/) {
+
+ unless ($Is_VMS && $key =~ /PERL$/) {
$self->{$key} = $self->catdir("..",$self->{$key})
unless $self->file_name_is_absolute($self->{$key});
} else {
($self->{NAME_SYM} = $self->{NAME}) =~ s/\W+/_/g;
- $self->init_main();
+ $self->init_main;
+ $self->init_VERSION;
+ $self->init_dist;
+ $self->init_INST;
+ $self->init_INSTALL;
+ $self->init_DEST;
+ $self->init_dirscan;
+ $self->init_xs;
+ $self->init_PERL;
+ $self->init_DIRFILESEP;
+ $self->init_linker;
if (! $self->{PERL_SRC} ) {
require VMS::Filespec if $Is_VMS;
}
}
- $self->init_dirscan();
$self->init_others();
+ $self->init_platform();
$self->init_PERM();
my($argv) = neatvalue(\@ARGV);
$argv =~ s/^\[/(/;
END
foreach my $key (sort keys %initial_att){
+ next if $key eq 'ARGS';
+
my($v) = neatvalue($initial_att{$key});
$v =~ s/(CODE|HASH|ARRAY|SCALAR)\([\dxa-f]+\)/$1\(...\)/;
$v =~ tr/\n/ /s;
END
if (scalar(keys %configure_att) > 0) {
foreach my $key (sort keys %configure_att){
+ next if $key eq 'ARGS';
my($v) = neatvalue($configure_att{$key});
$v =~ s/(CODE|HASH|ARRAY|SCALAR)\([\dxa-f]+\)/$1\(...\)/;
$v =~ tr/\n/ /s;
delete $self->{SKIP}; # free memory
if ($self->{PARENT}) {
- for (qw/install dist dist_basics dist_core dist_dir dist_test dist_ci/) {
+ for (qw/install dist dist_basics dist_core distdir dist_test dist_ci/) {
$self->{SKIPHASH}{$_} = 1;
}
}
}
foreach my $section ( @MM_Sections ){
+ # Support for new foo_target() methods.
+ my $method = $section;
+ $method .= '_target' unless $self->can($method);
+
print "Processing Makefile '$section' section\n" if ($Verbose >= 2);
my($skipit) = $self->skipcheck($section);
if ($skipit){
my(%a) = %{$self->{$section} || {}};
push @{$self->{RESULT}}, "\n# --- MakeMaker $section section:";
push @{$self->{RESULT}}, "# " . join ", ", %a if $Verbose && %a;
- push @{$self->{RESULT}}, $self->nicetext($self->$section( %a ));
+ push @{$self->{RESULT}}, $self->nicetext($self->$method( %a ));
}
}
my %att = @_;
my $self = MM->new(\%att);
- if (-f "$self->{MAKEFILE}.old") {
- chmod 0666, "$self->{MAKEFILE}.old";
- unlink "$self->{MAKEFILE}.old" or warn "unlink $self->{MAKEFILE}.old: $!";
+ if (-f $self->{MAKEFILE_OLD}) {
+ _unlink($self->{MAKEFILE_OLD}) or
+ warn "unlink $self->{MAKEFILE_OLD}: $!";
}
- rename $self->{MAKEFILE}, "$self->{MAKEFILE}.old"
- or warn "rename $self->{MAKEFILE} $self->{MAKEFILE}.old: $!"
- if -f $self->{MAKEFILE};
- open MF, '>', $self->{MAKEFILE} or die "open $self->{MAKEFILE} for write: $!";
+ if ( -f $self->{MAKEFILE} ) {
+ _rename($self->{MAKEFILE}, $self->{MAKEFILE_OLD}) or
+ warn "rename $self->{MAKEFILE} => $self->{MAKEFILE_OLD}: $!"
+ }
+ open MF, '>'.$self->{MAKEFILE} or die "open $self->{MAKEFILE} for write: $!";
print MF <<'EOP';
all:
my($self, @args) = @_;
foreach (@args) {
unless (m/(.*?)=(.*)/) {
- help(),exit 1 if m/^help$/;
++$Verbose if m/^verb/;
next;
}
(getpwuid($>))[7]
]ex;
}
- $self->{uc($name)} = $value;
+
+ # Remember the original args passed it. It will be useful later.
+ $self->{ARGS}{uc $name} = $self->{uc $name} = $value;
}
# catch old-style 'potential_libs' and inform user how to 'upgrade'
}
foreach my $mmkey (sort keys %$self){
+ next if $mmkey eq 'ARGS';
print STDOUT " $mmkey => ", neatvalue($self->{$mmkey}), "\n" if $Verbose;
print STDOUT "'$mmkey' is not a known MakeMaker parameter name.\n"
unless exists $Recognized_Att_Keys{$mmkey};
my($self) = @_;
# We allow extension-specific hints files.
- return unless -d "hints";
+ require File::Spec;
+ my $curdir = File::Spec->curdir;
+
+ my $hint_dir = File::Spec->catdir($curdir, "hints");
+ return unless -d $hint_dir;
# First we look for the best hintsfile we have
my($hint)="${^O}_$Config{osvers}";
# Also try without trailing minor version numbers.
while (1) {
- last if -f "hints/$hint.pl"; # found
+ last if -f File::Spec->catfile($hint_dir, "$hint.pl"); # found
} continue {
last unless $hint =~ s/_[^_]*$//; # nothing to cut off
}
- my $hint_file = "hints/$hint.pl";
+ my $hint_file = File::Spec->catfile($hint_dir, "$hint.pl");
return unless -f $hint_file; # really there
}
sub _run_hintfile {
- our $self;
+ no strict 'vars';
local($self) = shift; # make $self available to the hint file.
my($hint_file) = shift;
- local $@;
+ local($@, $!);
print STDERR "Processing hints file $hint_file\n";
- my $ret = do "./$hint_file";
- unless( defined $ret ) {
- print STDERR $@ if $@;
+
+ # Just in case the ./ isn't on the hint file, which File::Spec can
+ # often strip off, we bung the curdir into @INC
+ local @INC = (File::Spec->curdir, @INC);
+ my $ret = do $hint_file;
+ if( !defined $ret ) {
+ my $error = $@ || $!;
+ print STDERR $error;
}
}
# still trying to reduce the list to some reasonable minimum --
# because I want to make it easier for the user. A.K.
- no warnings 'redefine';
+ local $SIG{__WARN__} = sub {
+ # can't use 'no warnings redefined', 5.6 only
+ warn @_ unless $_[0] =~ /^Subroutine .* redefined/
+ };
foreach my $method (@Overridable) {
# We cannot say "next" here. Nick might call MY->makeaperl
sub flush {
my $self = shift;
my($chunk);
-# use FileHandle ();
-# my $fh = new FileHandle;
local *FH;
print STDOUT "Writing $self->{MAKEFILE} for $self->{NAME}\n";
unlink($self->{MAKEFILE}, "MakeMaker.tmp", $Is_VMS ? 'Descrip.MMS' : '');
-# $fh->open(">MakeMaker.tmp") or die "Unable to open MakeMaker.tmp: $!";
open(FH,">MakeMaker.tmp") or die "Unable to open MakeMaker.tmp: $!";
for $chunk (@{$self->{RESULT}}) {
-# print $fh "$chunk\n";
print FH "$chunk\n";
}
-# $fh->close;
close FH;
my($finalname) = $self->{MAKEFILE};
- rename("MakeMaker.tmp", $finalname);
+ _rename("MakeMaker.tmp", $finalname) or
+ warn "rename MakeMaker.tmp => $finalname: $!";
chmod 0644, $finalname unless $Is_VMS;
+ my %keep = map { ($_ => 1) } qw(NEEDS_LINKING HAS_LINK_CODE);
+
if ($self->{PARENT} && !$self->{_KEEP_AFTER_FLUSH}) {
foreach (keys %$self) { # safe memory
- delete $self->{$_} unless $Keep_after_flush{$_};
+ delete $self->{$_} unless $keep{$_};
}
}
system("$Config::Config{eunicefix} $finalname") unless $Config::Config{eunicefix} eq ":";
}
+
+# This is a rename for OS's where the target must be unlinked first.
+sub _rename {
+ my($src, $dest) = @_;
+ chmod 0666, $dest;
+ unlink $dest;
+ return rename $src, $dest;
+}
+
+# This is an unlink for OS's where the target must be writable first.
+sub _unlink {
+ my @files = @_;
+ chmod 0666, @files;
+ return unlink @files;
+}
+
+
# The following mkbootstrap() is only for installations that are calling
# the pre-4.1 mkbootstrap() from their old Makefiles. This MakeMaker
# writes Makefiles, that use ExtUtils::Mkbootstrap directly.
=head1 NAME
-ExtUtils::MakeMaker - create an extension Makefile
+ExtUtils::MakeMaker - Create a module Makefile
=head1 SYNOPSIS
=head2 How To Write A Makefile.PL
-The short answer is: Don't.
-
- Always begin with h2xs.
- Always begin with h2xs!
- ALWAYS BEGIN WITH H2XS!
-
-even if you're not building around a header file, and even if you
-don't have an XS component.
-
-Run h2xs(1) before you start thinking about writing a module. For so
-called pm-only modules that consist of C<*.pm> files only, h2xs has
-the C<-X> switch. This will generate dummy files of all kinds that are
-useful for the module developer.
-
-The medium answer is:
-
- use ExtUtils::MakeMaker;
- WriteMakefile( NAME => "Foo::Bar" );
+See ExtUtils::MakeMaker::Tutorial.
The long answer is the rest of the manpage :-)
=head2 make test
MakeMaker checks for the existence of a file named F<test.pl> in the
-current directory and if it exists it adds commands to the test target
-of the generated Makefile that will execute the script with the proper
-set of perl C<-I> options.
+current directory and if it exists it execute the script with the
+proper set of perl C<-I> options.
MakeMaker also checks for any files matching glob("t/*.t"). It will
-add commands to the test target of the generated Makefile that execute
-all matching files via the L<Test::Harness> module with the C<-I>
-switches set correctly.
+execute all matching files in alphabetical order via the
+L<Test::Harness> module with the C<-I> switches set correctly.
+
+If you'd like to see the raw output of your tests, set the
+C<TEST_VERBOSE> variable to true.
+
+ make test TEST_VERBOSE=1
=head2 make testdb
test under the Perl debugger (see L<perldebug>). If the file
F<test.pl> exists in the current directory, it is used for the test.
-If you want to debug some other testfile, set C<TEST_FILE> variable
+If you want to debug some other testfile, set the C<TEST_FILE> variable
thusly:
make testdb TEST_FILE=t/mytest.t
By default the debugger is called using C<-d> option to perl. If you
-want to specify some other option, set C<TESTDB_SW> variable:
+want to specify some other option, set the C<TESTDB_SW> variable:
make testdb TESTDB_SW=-Dx
INSTALLDIRS set to
perl site vendor
- PREFIX SITEPREFIX VENDORPREFIX
+ PERLPREFIX SITEPREFIX VENDORPREFIX
INST_ARCHLIB INSTALLARCHLIB INSTALLSITEARCH INSTALLVENDORARCH
INST_LIB INSTALLPRIVLIB INSTALLSITELIB INSTALLVENDORLIB
INST_BIN INSTALLBIN INSTALLSITEBIN INSTALLVENDORBIN
perl -le 'print join $/, @INC'
+Sometimes older versions of the module you're installing live in other
+directories in @INC. Because Perl loads the first version of a module it
+finds, not the newest, you might accidentally get one of these older
+versions even after installing a brand new version. To delete I<all other
+versions of the module you're installing> (not simply older ones) set the
+C<UNINST> variable.
+
+ make install UNINST=1
+
=head2 PREFIX and LIB attribute
=head2 Using Attributes and Parameters
-The following attributes can be specified as arguments to WriteMakefile()
-or as NAME=VALUE pairs on the command line:
+The following attributes may be specified as arguments to WriteMakefile()
+or as NAME=VALUE pairs on the command line.
=over 2
Something like C<"-DHAVE_UNISTD_H">
+=item DESTDIR
+
+This is the root directory into which the code will be installed. It
+I<prepends itself to the normal prefix>. For example, if your code
+would normally go into /usr/local/lib/perl you could set DESTDIR=/tmp/
+and installation would go into /tmp/usr/local/lib/perl.
+
+This is primarily of use for people who repackage Perl modules.
+
+NOTE: Due to the nature of make, it is important that you put the trailing
+slash on your DESTDIR. "/tmp/" not "/tmp".
+
=item DIR
Ref to array of subdirectories containing Makefile.PLs e.g. [ 'sdbm'
=item DISTNAME
-Your name for distributing the package (by tar file). This defaults to
-NAME above.
+A safe filename for the package.
+
+Defaults to NAME above but with :: replaced with -.
+
+For example, Foo::Bar becomes Foo-Bar.
+
+=item DISTVNAME
+
+Your name for distributing the package with the version number
+included. This is used by 'make dist' to name the resulting archive
+file.
+
+Defaults to DISTNAME-VERSION.
+
+For example, version 1.04 of Foo::Bar becomes Foo-Bar-1.04.
+
+On some OS's where . has special meaning VERSION_SYM may be used in
+place of VERSION.
=item DL_FUNCS
INST_SCRIPT directory. Make realclean will delete them from there
again.
+If your executables start with something like #!perl or
+#!/usr/bin/perl MakeMaker will change this to the path of the perl
+'Makefile.PL' was invoked with so the programs will be sure to run
+properly even if perl is not in /usr/bin/perl.
+
=item FIRST_MAKEFILE
-The name of the Makefile to be produced. Defaults to the contents of
-MAKEFILE, but can be overridden. This is used for the second Makefile
-that will be produced for the MAP_TARGET.
+The name of the Makefile to be produced. This is used for the second
+Makefile that will be produced for the MAP_TARGET.
+
+Defaults to 'Makefile' or 'Descrip.MMS' on VMS.
+
+(Note: we couldn't use MAKEFILE because dmake uses this for something
+else).
=item FULLPERL
=item IMPORTS
This attribute is used to specify names to be imported into the
-extension. It is only used on OS/2 and Win32.
+extension. Takes a hash ref.
+
+It is only used on OS/2 and Win32.
=item INC
testing. make install will copy the files in INST_SCRIPT to
INSTALLSCRIPT.
+=item LD
+
+Program to be used to link libraries for dynamic loading.
+
+Defaults to $Config{ld}.
+
+=item LDDLFLAGS
+
+Any special flags that might need to be passed to ld to create a
+shared library suitable for dynamic loading. It is up to the makefile
+to use it. (See L<Config/lddlflags>)
+
+Defaults to $Config{lddlflags}.
+
=item LDFROM
-defaults to "$(OBJECT)" and is used in the ld command to specify
+Defaults to "$(OBJECT)" and is used in the ld command to specify
what files to link/load from (also see dynamic_lib below for how to
specify ld flags)
make a perl. This is handled automatically as a switch by
MakeMaker. The user normally does not need it.
-=item MAKEFILE
+=item MAKEFILE_OLD
-The name of the Makefile to be produced.
+When 'make clean' or similar is run, the $(FIRST_MAKEFILE) will be
+backed up at this location.
+
+Defaults to $(FIRST_MAKEFILE).old or $(FIRST_MAKEFILE)_old on VMS.
=item MAN1PODS
=item NOECHO
-Defaults to C<@>. By setting it to an empty string you can generate a
-Makefile that echos all commands. Mainly used in debugging MakeMaker
-itself.
+Command so make does not print the literal commands its running.
+
+By setting it to an empty string you can generate a Makefile that
+prints all commands. Mainly used in debugging MakeMaker itself.
+
+Defaults to C<@>.
=item NORECURS
Boolean. Attribute to inhibit descending into subdirectories.
+=item NO_META
+
+When true, suppresses the generation and addition to the MANIFEST of
+the META.yml module meta-data file during 'make distdir'.
+
+Defaults to false.
+
=item NO_VC
In general, any generated Makefile checks for the current version of
system resources, error detection, memory usage reporting, catchable failure
of memory allocations, etc.
+=item PERLPREFIX
+
+Directory under which core modules are to be installed.
+
+Defaults to $Config{installprefixexp} falling back to
+$Config{installprefix}, $Config{prefixexp} or $Config{prefix} should
+$Config{installprefixexp} not exist.
+
+Overridden by PREFIX.
+
=item PERLRUN
Use this instead of $(PERL) when you wish to run perl. It will set up
If you specify LIB or any INSTALL* variables they will not be effected
by the PREFIX.
-Defaults to $Config{installprefixexp}.
-
-=item PREREQ_PM
-
-Hashref: Names of modules that need to be available to run this
-extension (e.g. Fcntl for SDBM_File) are the keys of the hash and the
-desired version is the value. If the required version number is 0, we
-only check if any version is installed already.
-
=item PREREQ_FATAL
Bool. If this parameter is true, failing to have the required modules
It is I<extremely> rare to have to use C<PREREQ_FATAL> at all!
+=item PREREQ_PM
+
+Hashref: Names of modules that need to be available to run this
+extension (e.g. Fcntl for SDBM_File) are the keys of the hash and the
+desired version is the value. If the required version number is 0, we
+only check if any version is installed already.
+
=item PREREQ_PRINT
Bool. If this parameter is true, the prerequisites will be printed to
-stdout and MakeMaker will exit. The output format is
+stdout and MakeMaker will exit. The output format is an evalable hash
+ref.
$PREREQ_PM = {
'A::B' => Vers1,
=item SITEPREFIX
-Like PREFIX, but only for the site install locations.
+Like PERLPREFIX, but only for the site install locations.
+
+Defaults to $Config{siteprefixexp}. Perls prior to 5.6.0 didn't have
+an explicit siteprefix in the Config. In those cases
+$Config{installprefix} will be used.
+
+Overridable by PREFIX
+
+=item SIGN
+
+When true, perform the generation and addition to the MANIFEST of
+the SIGNATURE file during 'make distdir', via 'cpansign -s'.
+
+Note that you need to install the Module::Signature module to
+perform this operation.
-Defaults to PREFIX (if set) or $Config{siteprefixexp}
+Defaults to false.
=item SKIP
=item VENDORPREFIX
-Like PREFIX, but only for the vendor install locations.
+Like PERLPREFIX, but only for the vendor install locations.
-Defaults to PREFIX (if set) or $Config{vendorprefixexp}
+Defaults to $Config{vendorprefixexp}.
+
+Overridable by PREFIX
+
+=item VERBINST
+
+If true, make install will be verbose
=item VERSION
$VERSION = '1.00';
*VERSION = \'1.01';
- ( $VERSION ) = '$Revision: 1.37 $ ' =~ /\$Revision:\s+([^\s]+)/;
+ $VERSION = sprintf "%d.%03d", q$Revision: 1.145 $ =~ /(\d+)/g;
$FOO::VERSION = '1.10';
*FOO::VERSION = \'1.11';
our $VERSION = 1.2.3; # new for perl5.6.0
See attribute C<depend> below.
+=item VERSION_SYM
+
+A sanitized VERSION with . replaced by _. For places where . has
+special meaning (some filesystems, RCS labels, etc...)
+
=item XS
Hashref of .xs files. MakeMaker will default this. e.g.
=head2 Additional lowercase attributes
can be used to pass parameters to the methods which implement that
-part of the Makefile.
+part of the Makefile. Parameters are specified as a hash ref but are
+passed to the method as a hash.
=over 2
{ANY_MACRO => ANY_VALUE, ...}
+=item postamble
+
+Anything put here will be passed to MY::postamble() if you have one.
+
=item realclean
{FILES => '$(INST_ARCHAUTODIR)/*.xyz'}
If you still need a different solution, try to develop another
subroutine that fits your needs and submit the diffs to
-F<makemaker@perl.org>
+C<makemaker@perl.org>
For a complete description of all MakeMaker methods see
L<ExtUtils::MM_Unix>.
MAKE_FRAG
}
+=head2 The End Of Cargo Cult Programming
+
+WriteMakefile() now does some basic sanity checks on its parameters to
+protect against typos and malformatted values. This means some things
+which happened to work in the past will now throw warnings and
+possibly produce internal errors.
+
+Some of the most common mistakes:
+
+=over 2
+
+=item C<<MAN3PODS => ' '>>
+
+This is commonly used to supress the creation of man pages. MAN3PODS
+takes a hash ref not a string, but the above worked by accident in old
+versions of MakeMaker.
+
+The correct code is C<<MAN3PODS => { }>>.
+
+=back
+
=head2 Hintsfile support
directory with the name C<$(DISTNAME)-$(VERSION)>. If that directory
exists, it will be removed first.
+Additionally, it will create a META.yml module meta-data file and add
+this to your MANFIEST. You can shut this behavior off with the NO_META
+flag.
+
=item make disttest
Makes a distdir first, and runs a C<perl Makefile.PL>, a make, and
WriteMakefile( 'dist' => { COMPRESS=>"bzip2", SUFFIX=>".bz2" })
+
+=head2 Module Meta-Data
+
+Long plaguing users of MakeMaker based modules has been the problem of
+getting basic information about the module out of the sources
+I<without> running the F<Makefile.PL> and doing a bunch of messy
+heuristics on the resulting F<Makefile>. To this end a simple module
+meta-data file has been introduced, F<META.yml>.
+
+F<META.yml> is a YAML document (see http://www.yaml.org) containing
+basic information about the module (name, version, prerequisites...)
+in an easy to read format. The format is developed and defined by the
+Module::Build developers (see
+http://module-build.sourceforge.net/META-spec.html)
+
+MakeMaker will automatically generate a F<META.yml> file for you and
+add it to your F<MANIFEST> as part of the 'distdir' target (and thus
+the 'dist' target). This is intended to seamlessly and rapidly
+populate CPAN with module meta-data. If you wish to shut this feature
+off, set the C<NO_META> C<WriteMakefile()> flag to true.
+
+
=head2 Disabling an extension
If some events detected in F<Makefile.PL> imply that there is no way
dependency in a CPAN::Bundle, but the functionality is supported by
different means on the current architecture).
+=head2 Other Handy Functions
+
+=over 4
+
+=item prompt
+
+ my $value = prompt($message);
+ my $value = prompt($message, $default);
+
+The C<prompt()> function provides an easy way to request user input
+used to write a makefile. It displays the $message as a prompt for
+input. If a $default is provided it will be used as a default. The
+function returns the $value selected by the user.
+
+If C<prompt()> detects that it is not running interactively and there
+is nothing on STDIN or if the PERL_MM_USE_DEFAULT environment variable
+is set to true, the $default will be used without prompting. This
+prevents automated processes from blocking on user input.
+
+If no $default is provided an empty string will be used instead.
+
+=back
+
+
=head1 ENVIRONMENT
-=over 8
+=over 4
=item PERL_MM_OPT
=head1 AUTHORS
-Andy Dougherty <F<doughera@lafayette.edu>>, Andreas KE<ouml>nig
-<F<andreas.koenig@mind.de>>, Tim Bunce <F<timb@cpan.org>>. VMS
-support by Charles Bailey <F<bailey@newman.upenn.edu>>. OS/2 support
-by Ilya Zakharevich <F<ilya@math.ohio-state.edu>>.
+Andy Dougherty C<doughera@lafayette.edu>, Andreas KE<ouml>nig
+C<andreas.koenig@mind.de>, Tim Bunce C<timb@cpan.org>. VMS
+support by Charles Bailey C<bailey@newman.upenn.edu>. OS/2 support
+by Ilya Zakharevich C<ilya@math.ohio-state.edu>.
-Currently maintained by Michael G Schwern <F<schwern@pobox.com>>
+Currently maintained by Michael G Schwern C<schwern@pobox.com>
-Send patches and ideas to <F<makemaker@perl.org>>.
+Send patches and ideas to C<makemaker@perl.org>.
Send bug reports via http://rt.cpan.org/. Please send your
generated Makefile along with your report.
-For more up-to-date information, see http://www.makemaker.org.
+For more up-to-date information, see L<http://www.makemaker.org>.
+
+=head1 LICENSE
+
+This program is free software; you can redistribute it and/or
+modify it under the same terms as Perl itself.
+
+See L<http://www.perl.com/perl/misc/Artistic.html>
+
=cut