use strict;
use Exporter ();
-use Carp ();
-use Config;
-use File::Basename qw(basename dirname fileparse);
-use File::Spec;
+use Carp;
+use Config qw(%Config);
+use File::Basename qw(basename dirname);
use DirHandle;
-use strict;
+
use vars qw($VERSION @ISA
- $Is_Mac $Is_OS2 $Is_VMS $Is_Win32 $Is_Dos $Is_VOS $Is_NetWare
- $Verbose %pm %static $Xsubpp_Version
+ $Is_Mac $Is_OS2 $Is_VMS $Is_Win32 $Is_Win95 $Is_Dos $Is_VOS
+ $Is_QNX $Is_AIX $Is_OSF $Is_IRIX $Is_NetBSD $Is_BSD
+ $Is_SunOS4 $Is_Solaris $Is_SunOS
+ $Verbose %pm %static
%Config_Override
);
use ExtUtils::MakeMaker qw($Verbose neatvalue);
-$VERSION = '1.30_01';
+$VERSION = '1.45';
require ExtUtils::MM_Any;
@ISA = qw(ExtUtils::MM_Any);
-$Is_OS2 = $^O eq 'os2';
-$Is_Mac = $^O eq 'MacOS';
-$Is_Win32 = $^O eq 'MSWin32';
-$Is_Dos = $^O eq 'dos';
-$Is_VOS = $^O eq 'vos';
-+$Is_NetWare = $Config{'osname'} eq 'NetWare'; # Config{'osname'} intentional
-if ($Is_NetWare) {
- $^O = 'NetWare';
- $Is_Win32 = 0;
-}
+$Is_OS2 = $^O eq 'os2';
+$Is_Mac = $^O eq 'MacOS';
+$Is_Win32 = $^O eq 'MSWin32' || $Config{osname} eq 'NetWare';
+$Is_Win95 = $Is_Win32 && Win32::IsWin95();
+$Is_Dos = $^O eq 'dos';
+$Is_VOS = $^O eq 'vos';
+$Is_VMS = $^O eq 'VMS';
+$Is_QNX = $^O eq 'qnx';
+$Is_AIX = $^O eq 'aix';
+$Is_OSF = $^O eq 'dec_osf';
+$Is_IRIX = $^O eq 'irix';
+$Is_NetBSD = $^O eq 'netbsd';
+$Is_SunOS4 = $^O eq 'sunos';
+$Is_Solaris = $^O eq 'solaris';
+$Is_SunOS = $Is_SunOS4 || $Is_Solaris;
+$Is_BSD = $^O =~ /^(?:free|net|open)bsd|bsdos$/;
-if ($Is_VMS = $^O eq 'VMS') {
- require VMS::Filespec;
- import VMS::Filespec qw( &vmsify );
-}
=head1 NAME
The following description of methods is still under
development. Please refer to the code for not suitably documented
-sections and complain loudly to the makemaker mailing list.
+sections and complain loudly to the makemaker@perl.org mailing list.
+Better yet, provide a patch.
Not all of the methods below are overridable in a
Makefile.PL. Overridable methods are marked as (o). All methods are
=cut
# So we don't have to keep calling the methods over and over again,
-# we have these globals to cache the values. They have to be global
-# else the SelfLoaded methods can't see them.
-use vars qw($Curdir $Rootdir $Updir);
-$Curdir = File::Spec->curdir;
-$Rootdir = File::Spec->rootdir;
-$Updir = File::Spec->updir;
-
-sub c_o;
-sub clean;
-sub const_cccmd;
-sub const_config;
-sub const_loadlibs;
-sub constants;
-sub depend;
-sub dir_target;
-sub dist;
-sub dist_basics;
-sub dist_ci;
-sub dist_core;
-sub dist_dir;
-sub dist_test;
-sub dlsyms;
-sub dynamic;
-sub dynamic_bs;
-sub dynamic_lib;
-sub exescan;
-sub export_list;
-sub extliblist;
-sub find_perl;
-sub fixin;
-sub force;
-sub guess_name;
-sub has_link_code;
-sub init_dirscan;
-sub init_main;
-sub init_others;
-sub install;
-sub installbin;
-sub libscan;
-sub linkext;
-sub lsdir;
-sub macro;
-sub makeaperl;
-sub makefile;
-sub manifypods;
-sub maybe_command;
-sub maybe_command_in_dirs;
-sub needs_linking;
-sub nicetext;
-sub parse_abstract;
-sub parse_version;
-sub pasthru;
-sub perl_archive;
-sub perl_archive_after;
-sub perl_script;
-sub perldepend;
-sub pm_to_blib;
-sub ppd;
-sub post_constants;
-sub post_initialize;
-sub postamble;
-sub prefixify;
-sub processPL;
-sub quote_paren;
-sub realclean;
-sub replace_manpage_separator;
-sub static;
-sub static_lib;
-sub staticmake;
-sub subdir_x;
-sub subdirs;
-sub test;
-sub test_via_harness;
-sub test_via_script;
-sub tool_autosplit;
-sub tool_xsubpp;
-sub tools_other;
-sub top_targets;
-sub writedoc;
-sub xs_c;
-sub xs_cpp;
-sub xs_o;
-sub xsubpp_version;
-
-#use SelfLoader;
-
-# SelfLoader not smart enough to avoid autoloading DESTROY
-sub DESTROY { }
-
-#1;
-
-#__DATA__
-
-=head2 SelfLoaded methods
+# we have these globals to cache the values. Faster and shrtr.
+my $Curdir = __PACKAGE__->curdir;
+my $Rootdir = __PACKAGE__->rootdir;
+my $Updir = __PACKAGE__->updir;
+
+
+=head2 Methods
+
+=over 4
+
+=item os_flavor (o)
+
+Simply says that we're Unix.
+
+=cut
+
+sub os_flavor {
+ return('Unix');
+}
-=over 2
=item c_o (o)
# Delete temporary files but do not touch installed files. We don\'t delete
# the Makefile here so a later make realclean still has a makefile to use.
-clean ::
+clean :: clean_subdirs
');
- # clean subdirectories first
- for $dir (@{$self->{DIR}}) {
- if ($Is_Win32 && Win32::IsWin95()) {
- push @m, <<EOT;
- cd $dir
- \$(TEST_F) $self->{MAKEFILE}
- \$(MAKE) clean
- cd ..
-EOT
- }
- else {
- push @m, <<EOT;
- -cd $dir && \$(TEST_F) $self->{MAKEFILE} && \$(MAKE) clean
-EOT
- }
- }
my(@otherfiles) = values %{$self->{XS}}; # .c files from *.xs files
- if ( $^O eq 'qnx' ) {
+ if ( $Is_QNX ) {
my @errfiles = @{$self->{C}};
for ( @errfiles ) {
s/.c$/.err/;
push(@otherfiles, $attribs{FILES}) if $attribs{FILES};
push(@otherfiles, qw[./blib $(MAKE_APERL_FILE)
$(INST_ARCHAUTODIR)/extralibs.all
- perlmain.c tmon.out mon.out so_locations pm_to_blib
+ $(INST_ARCHAUTODIR)/extralibs.ld
+ perlmain.c tmon.out mon.out so_locations
+ blibdirs pm_to_blib
*$(OBJ_EXT) *$(LIB_EXT) perl.exe perl perl$(EXE_EXT)
$(BOOTSTRAP) $(BASEEXT).bso
$(BASEEXT).def lib$(BASEEXT).def
}
else {
push(@otherfiles, qw[core core.*perl.*.? *perl.core]);
+
+ # core.\d+
+ push(@otherfiles, map { "core." . "[0-9]"x$_ } (1..5));
}
- push @m, "\t-$self->{RM_RF} @otherfiles\n";
+ push @m, "\t-\$(RM_RF) @otherfiles\n";
# See realclean and ext/utils/make_ext for usage of Makefile.old
push(@m,
- "\t-$self->{MV} $self->{MAKEFILE} $self->{MAKEFILE}.old \$(DEV_NULL)\n");
+ "\t-\$(MV) \$(FIRST_MAKEFILE) \$(MAKEFILE_OLD) \$(DEV_NULL)\n");
push(@m,
"\t$attribs{POSTOP}\n") if $attribs{POSTOP};
join("", @m);
}
+
+=item clean_subdirs_target
+
+ my $make_frag = $MM->clean_subdirs_target;
+
+Returns the clean_subdirs target. This is used by the clean target to
+call clean on any subdirectories which contain Makefiles.
+
+=cut
+
+sub clean_subdirs_target {
+ my($self) = shift;
+
+ # No subdirectories, no cleaning.
+ return <<'NOOP_FRAG' unless @{$self->{DIR}};
+clean_subdirs :
+ $(NOECHO) $(NOOP)
+NOOP_FRAG
+
+
+ my $clean = "clean_subdirs :\n";
+
+ for my $dir (@{$self->{DIR}}) {
+ $clean .= sprintf <<'MAKE_FRAG', $dir;
+ -cd %s && $(TEST_F) $(FIRST_MAKEFILE) && $(MAKE) clean
+MAKE_FRAG
+ }
+
+ return $clean;
+}
+
+
=item const_cccmd (o)
Returns the full compiler call for C programs and stores the
my(%once_only);
foreach $m (@{$self->{CONFIG}}){
# SITE*EXP macros are defined in &constants; avoid duplicates here
- next if $once_only{$m} or $m eq 'sitelibexp' or $m eq 'sitearchexp';
+ next if $once_only{$m};
$self->{uc $m} = quote_paren($self->{uc $m});
push @m, uc($m) , ' = ' , $self->{uc $m}, "\n";
$once_only{$m} = 1;
=item constants (o)
-Initializes lots of constants and .SUFFIXES and .PHONY
+ my $make_frag = $mm->constants;
+
+Prints out macros for lots of constants.
=cut
sub constants {
my($self) = @_;
- my(@m,$tmp);
+ my @m = ();
- for $tmp (qw/
+ for my $macro (qw(
- AR_STATIC_ARGS NAME DISTNAME NAME_SYM VERSION
- VERSION_SYM XS_VERSION
- INST_ARCHLIB INST_SCRIPT INST_BIN INST_LIB
+ AR_STATIC_ARGS DIRFILESEP
+ NAME NAME_SYM
+ VERSION VERSION_MACRO VERSION_SYM DEFINE_VERSION
+ XS_VERSION XS_VERSION_MACRO XS_DEFINE_VERSION
+ INST_ARCHLIB INST_SCRIPT INST_BIN INST_LIB
+ INST_MAN1DIR INST_MAN3DIR
+ MAN1EXT MAN3EXT
INSTALLDIRS
- PREFIX SITEPREFIX VENDORPREFIX
- INSTALLPRIVLIB INSTALLSITELIB INSTALLVENDORLIB
- INSTALLARCHLIB INSTALLSITEARCH INSTALLVENDORARCH
- INSTALLBIN INSTALLSITEBIN INSTALLVENDORBIN INSTALLSCRIPT
- PERL_LIB PERL_ARCHLIB
- SITELIBEXP SITEARCHEXP
+ DESTDIR PREFIX
+ PERLPREFIX SITEPREFIX VENDORPREFIX
+ ),
+ (map { ("INSTALL".$_,
+ "DESTINSTALL".$_)
+ } $self->installvars),
+ qw(
+ PERL_LIB
+ PERL_ARCHLIB
LIBPERL_A MYEXTLIB
- FIRST_MAKEFILE MAKE_APERL_FILE PERLMAINCC PERL_SRC
- PERL_INC PERL FULLPERL PERLRUN FULLPERLRUN PERLRUNINST
- FULLPERLRUNINST ABSPERL ABSPERLRUN ABSPERLRUNINST
- FULL_AR PERL_CORE NOOP NOECHO
-
- / )
+ FIRST_MAKEFILE MAKEFILE_OLD MAKE_APERL_FILE
+ PERLMAINCC PERL_SRC PERL_INC
+ PERL FULLPERL ABSPERL
+ PERLRUN FULLPERLRUN ABSPERLRUN
+ PERLRUNINST FULLPERLRUNINST ABSPERLRUNINST
+ PERL_CORE
+ PERM_RW PERM_RWX
+
+ ) )
{
- next unless defined $self->{$tmp};
+ next unless defined $self->{$macro};
# pathnames can have sharp signs in them; escape them so
# make doesn't think it is a comment-start character.
- $self->{$tmp} =~ s/#/\\#/g;
- push @m, "$tmp = $self->{$tmp}\n";
+ $self->{$macro} =~ s/#/\\#/g;
+ push @m, "$macro = $self->{$macro}\n";
}
push @m, qq{
-VERSION_MACRO = VERSION
-DEFINE_VERSION = -D\$(VERSION_MACRO)=\\\"\$(VERSION)\\\"
-XS_VERSION_MACRO = XS_VERSION
-XS_DEFINE_VERSION = -D\$(XS_VERSION_MACRO)=\\\"\$(XS_VERSION)\\\"
-PERL_MALLOC_DEF = -DPERL_EXTMALLOC_DEF -Dmalloc=Perl_malloc -Dfree=Perl_mfree -Drealloc=Perl_realloc -Dcalloc=Perl_calloc
-};
-
- push @m, qq{
-MAKEMAKER = $INC{'ExtUtils/MakeMaker.pm'}
-MM_VERSION = $ExtUtils::MakeMaker::VERSION
+MAKEMAKER = $self->{MAKEMAKER}
+MM_VERSION = $self->{MM_VERSION}
+MM_REVISION = $self->{MM_REVISION}
};
push @m, q{
# DLBASE = Basename part of dynamic library. May be just equal BASEEXT.
};
- for $tmp (qw/
+ for my $macro (qw/
FULLEXT BASEEXT PARENT_NAME DLBASE VERSION_FROM INC DEFINE OBJECT
LDFROM LINKTYPE PM_FILTER
/ )
{
- next unless defined $self->{$tmp};
- push @m, "$tmp = $self->{$tmp}\n";
+ next unless defined $self->{$macro};
+ push @m, "$macro = $self->{$macro}\n";
}
push @m, "
# Handy lists of source code files:
-XS_FILES= ".join(" \\\n\t", sort keys %{$self->{XS}})."
-C_FILES = ".join(" \\\n\t", @{$self->{C}})."
-O_FILES = ".join(" \\\n\t", @{$self->{O_FILES}})."
-H_FILES = ".join(" \\\n\t", @{$self->{H}})."
-MAN1PODS = ".join(" \\\n\t", sort keys %{$self->{MAN1PODS}})."
-MAN3PODS = ".join(" \\\n\t", sort keys %{$self->{MAN3PODS}})."
+XS_FILES = ".$self->wraplist(sort keys %{$self->{XS}})."
+C_FILES = ".$self->wraplist(@{$self->{C}})."
+O_FILES = ".$self->wraplist(@{$self->{O_FILES}})."
+H_FILES = ".$self->wraplist(@{$self->{H}})."
+MAN1PODS = ".$self->wraplist(sort keys %{$self->{MAN1PODS}})."
+MAN3PODS = ".$self->wraplist(sort keys %{$self->{MAN3PODS}})."
";
- for $tmp (qw/
- INST_MAN1DIR MAN1EXT
- INSTALLMAN1DIR INSTALLSITEMAN1DIR INSTALLVENDORMAN1DIR
- INST_MAN3DIR MAN3EXT
- INSTALLMAN3DIR INSTALLSITEMAN3DIR INSTALLVENDORMAN3DIR
- /)
- {
- next unless defined $self->{$tmp};
- push @m, "$tmp = $self->{$tmp}\n";
- }
-
- for $tmp (qw(
- PERM_RW PERM_RWX
- )
- )
- {
- my $method = lc($tmp);
- # warn "self[$self] method[$method]";
- push @m, "$tmp = ", $self->$method(), "\n";
- }
push @m, q{
-.NO_CONFIG_REC: Makefile
-} if $ENV{CLEARCASE_ROOT};
-
- # why not q{} ? -- emacs
- push @m, qq{
-# work around a famous dec-osf make(1) feature(?):
-makemakerdflt: all
+# Where is the Config information that we are using/depend on
+CONFIGDEP = $(PERL_ARCHLIB)$(DIRFILESEP)Config.pm $(PERL_INC)$(DIRFILESEP)config.h
+};
-.SUFFIXES: .xs .c .C .cpp .i .s .cxx .cc \$(OBJ_EXT)
-# Nick wanted to get rid of .PRECIOUS. I don't remember why. I seem to recall, that
-# some make implementations will delete the Makefile when we rebuild it. Because
-# we call false(1) when we rebuild it. So make(1) is not completely wrong when it
-# does so. Our milage may vary.
-# .PRECIOUS: Makefile # seems to be not necessary anymore
+ push @m, qq{
+# Where to build things
+INST_LIBDIR = $self->{INST_LIBDIR}
+INST_ARCHLIBDIR = $self->{INST_ARCHLIBDIR}
-.PHONY: all config static dynamic test linkext manifest
+INST_AUTODIR = $self->{INST_AUTODIR}
+INST_ARCHAUTODIR = $self->{INST_ARCHAUTODIR}
-# Where is the Config information that we are using/depend on
-CONFIGDEP = \$(PERL_ARCHLIB)/Config.pm \$(PERL_INC)/config.h
+INST_STATIC = $self->{INST_STATIC}
+INST_DYNAMIC = $self->{INST_DYNAMIC}
+INST_BOOT = $self->{INST_BOOT}
};
- my @parentdir = split(/::/, $self->{PARENT_NAME});
- push @m, q{
-# Where to put things:
-INST_LIBDIR = }. File::Spec->catdir('$(INST_LIB)',@parentdir) .q{
-INST_ARCHLIBDIR = }. File::Spec->catdir('$(INST_ARCHLIB)',@parentdir) .q{
-INST_AUTODIR = }. File::Spec->catdir('$(INST_LIB)','auto','$(FULLEXT)') .q{
-INST_ARCHAUTODIR = }. File::Spec->catdir('$(INST_ARCHLIB)','auto','$(FULLEXT)') .q{
+ push @m, qq{
+# Extra linker info
+EXPORT_LIST = $self->{EXPORT_LIST}
+PERL_ARCHIVE = $self->{PERL_ARCHIVE}
+PERL_ARCHIVE_AFTER = $self->{PERL_ARCHIVE_AFTER}
};
- if ($self->has_link_code()) {
- push @m, '
-INST_STATIC = $(INST_ARCHAUTODIR)/$(BASEEXT)$(LIB_EXT)
-INST_DYNAMIC = $(INST_ARCHAUTODIR)/$(DLBASE).$(DLEXT)
-INST_BOOT = $(INST_ARCHAUTODIR)/$(BASEEXT).bs
-';
- } else {
- push @m, '
-INST_STATIC =
-INST_DYNAMIC =
-INST_BOOT =
-';
- }
-
- $tmp = $self->export_list;
push @m, "
-EXPORT_LIST = $tmp
-";
- $tmp = $self->perl_archive;
- push @m, "
-PERL_ARCHIVE = $tmp
-";
- $tmp = $self->perl_archive_after;
- push @m, "
-PERL_ARCHIVE_AFTER = $tmp
-";
- push @m, q{
-TO_INST_PM = }.join(" \\\n\t", sort keys %{$self->{PM}}).q{
+TO_INST_PM = ".$self->wraplist(sort keys %{$self->{PM}})."
-PM_TO_BLIB = }.join(" \\\n\t", %{$self->{PM}}).q{
-};
+PM_TO_BLIB = ".$self->wraplist(%{$self->{PM}})."
+";
join('',@m);
}
+
=item depend (o)
Same as macro for the depend attribute.
join "", @m;
}
-=item dir_target (o)
-Takes an array of directories that need to exist and returns a
-Makefile entry for a .exists file in these directories. Returns
-nothing, if the entry has already been processed. We're helpless
-though, if the same directory comes as $(FOO) _and_ as "bar". Both of
-them get an entry, that's why we use "::".
+=item dir_target B<DEPRECATED>
+
+ my $make_frag = $mm->dir_target(@directories);
+
+I<This function is deprecated> its use is no longer necessary and is I<only
+provided for backwards compatibility>. blibdirs_target provides a much
+simpler mechanism and pm_to_blib() can create its own directories anyway.
+
+Returns a Makefile entry for a .exists file in each of the @directories.
+The purpose is to create a directory and provide a make target to depend on.
+The make target is a .exists file in each of those directories.
+
+For example
+
+ $mm->dir_target('$(INST_ARCHDIR)');
+
+would return the make target C<$(INST_ARCHDIR)/.exists> which would
+create $(INST_ARCHDIR) and touch .exists. You would depend on this target
+to make sure $(INST_ARCHDIR) is created.
+
+Ignores directories which have already gone through dir_target() so you
+might wind up getting nothing.
=cut
sub dir_target {
-# --- Make-Directories section (internal method) ---
-# dir_target(@array) returns a Makefile entry for the file .exists in each
-# named directory. Returns nothing, if the entry has already been processed.
-# We're helpless though, if the same directory comes as $(FOO) _and_ as "bar".
-# Both of them get an entry, that's why we use "::". I chose '$(PERL)' as the
-# prerequisite, because there has to be one, something that doesn't change
-# too often :)
-
- my($self,@dirs) = @_;
- my(@m,$dir,$targdir);
- foreach $dir (@dirs) {
- my($src) = File::Spec->catfile($self->{PERL_INC},'perl.h');
- my($targ) = File::Spec->catfile($dir,'.exists');
- # catfile may have adapted syntax of $dir to target OS, so...
- if ($Is_VMS) { # Just remove file name; dirspec is often in macro
- ($targdir = $targ) =~ s:/?\.exists\z::;
- }
- else { # while elsewhere we expect to see the dir separator in $targ
- $targdir = dirname($targ);
- }
- next if $self->{DIR_TARGET}{$self}{$targdir}++;
- push @m, qq{
-$targ :: $src
- $self->{NOECHO}\$(MKPATH) $targdir
- $self->{NOECHO}\$(EQUALIZE_TIMESTAMP) $src $targ
-};
- push(@m, qq{
- -$self->{NOECHO}\$(CHMOD) \$(PERM_RWX) $targdir
-}) unless $Is_VMS;
+ my($self, @dirs) = @_;
+
+ my @targs = ();
+ my $make = '';
+ foreach my $dir (@dirs) {
+ my $targ = $self->catfile($dir, '.exists');
+
+ my $targdir;
+ if ($Is_VMS) { # Just remove file name; dirspec is often in macro
+ ($targdir = $targ) =~ s:/?\.exists\z::;
+ }
+ else { # while elsewhere we expect to see the dir separator in $targ
+ $targdir = dirname($targ);
+ }
+
+ next if $self->{DIR_TARGET}{$self}{$targdir}++;
+
+ push @targs, $targ;
+ $make .= <<MAKE_FRAG;
+$targ ::
+ \$(NOECHO) \$(MKPATH) $targdir
+ \$(NOECHO) \$(TOUCH) $targ
+ \$(NOECHO) \$(CHMOD) \$(PERM_RWX) $targdir
+
+MAKE_FRAG
+
}
- join "", @m;
+
+ # So these new .exists targets get called along with blibdirs.
+ my $blib_addition = '';
+ $blib_addition = <<MAKE_FRAG if @targs;
+blibdirs :: @targs
+ \$(NOECHO) \$(NOOP)
+
+MAKE_FRAG
+
+ return $blib_addition . $make;
}
-=item dist (o)
+
+=item init_DEST
+
+ $mm->init_DEST
+
+Defines the DESTDIR and DEST* variables paralleling the INSTALL*.
+
+=cut
+
+sub init_DEST {
+ my $self = shift;
+
+ # Initialize DESTDIR
+ $self->{DESTDIR} ||= '';
+
+ # Make DEST variables.
+ foreach my $var ($self->installvars) {
+ my $destvar = 'DESTINSTALL'.$var;
+ $self->{$destvar} ||= '$(DESTDIR)$(INSTALL'.$var.')';
+ }
+}
+
+
+=item init_dist
+
+ $mm->init_dist;
Defines a lot of macros for distribution support.
+ macro description default
+
+ TAR tar command to use tar
+ TARFLAGS flags to pass to TAR cvf
+
+ ZIP zip command to use zip
+ ZIPFLAGS flags to pass to ZIP -r
+
+ COMPRESS compression command to gzip --best
+ use for tarfiles
+ SUFFIX suffix to put on .gz
+ compressed files
+
+ SHAR shar command to use shar
+
+ PREOP extra commands to run before
+ making the archive
+ POSTOP extra commands to run after
+ making the archive
+
+ TO_UNIX a command to convert linefeeds
+ to Unix style in your archive
+
+ CI command to checkin your ci -u
+ sources to version control
+ RCS_LABEL command to label your sources rcs -Nv$(VERSION_SYM): -q
+ just after CI is run
+
+ DIST_CP $how argument to manicopy() best
+ when the distdir is created
+
+ DIST_DEFAULT default target to use to tardist
+ create a distribution
+
+ DISTVNAME name of the resulting archive $(DISTNAME)-$(VERSION)
+ (minus suffixes)
+
+=cut
+
+sub init_dist {
+ my $self = shift;
+
+ $self->{TAR} ||= 'tar';
+ $self->{TARFLAGS} ||= 'cvf';
+ $self->{ZIP} ||= 'zip';
+ $self->{ZIPFLAGS} ||= '-r';
+ $self->{COMPRESS} ||= 'gzip --best';
+ $self->{SUFFIX} ||= '.gz';
+ $self->{SHAR} ||= 'shar';
+ $self->{PREOP} ||= '$(NOECHO) $(NOOP)'; # eg update MANIFEST
+ $self->{POSTOP} ||= '$(NOECHO) $(NOOP)'; # eg remove the distdir
+ $self->{TO_UNIX} ||= '$(NOECHO) $(NOOP)';
+
+ $self->{CI} ||= 'ci -u';
+ $self->{RCS_LABEL}||= 'rcs -Nv$(VERSION_SYM): -q';
+ $self->{DIST_CP} ||= 'best';
+ $self->{DIST_DEFAULT} ||= 'tardist';
+
+ ($self->{DISTNAME} = $self->{NAME}) =~ s{::}{-}g unless $self->{DISTNAME};
+ $self->{DISTVNAME} ||= $self->{DISTNAME}.'-'.$self->{VERSION};
+
+}
+
+=item dist (o)
+
+ my $dist_macros = $mm->dist(%overrides);
+
+Generates a make fragment defining all the macros initialized in
+init_dist.
+
+%overrides can be used to override any of the above.
+
=cut
sub dist {
my($self, %attribs) = @_;
- # VERSION should be sanitised before use as a file name
- $attribs{VERSION} ||= '$(VERSION)';
- $attribs{NAME} ||= '$(DISTNAME)';
- $attribs{TAR} ||= 'tar';
- $attribs{TARFLAGS} ||= 'cvf';
- $attribs{ZIP} ||= 'zip';
- $attribs{ZIPFLAGS} ||= '-r';
- $attribs{COMPRESS} ||= 'gzip --best';
- $attribs{SUFFIX} ||= '.gz';
- $attribs{SHAR} ||= 'shar';
- $attribs{PREOP} ||= "$self->{NOECHO}\$(NOOP)"; # eg update MANIFEST
- $attribs{POSTOP} ||= "$self->{NOECHO}\$(NOOP)"; # eg remove the distdir
- $attribs{TO_UNIX} ||= "$self->{NOECHO}\$(NOOP)";
-
- $attribs{CI} ||= 'ci -u';
- $attribs{RCS_LABEL}||= 'rcs -Nv$(VERSION_SYM): -q';
- $attribs{DIST_CP} ||= 'best';
- $attribs{DIST_DEFAULT} ||= 'tardist';
-
- $attribs{DISTVNAME} ||= "$attribs{NAME}-$attribs{VERSION}";
-
- # We've already printed out VERSION and NAME variables.
- delete $attribs{VERSION};
- delete $attribs{NAME};
-
my $make = '';
- while(my($var, $value) = each %attribs) {
- $make .= "$var = $value\n";
+ foreach my $key (qw(
+ TAR TARFLAGS ZIP ZIPFLAGS COMPRESS SUFFIX SHAR
+ PREOP POSTOP TO_UNIX
+ CI RCS_LABEL DIST_CP DIST_DEFAULT
+ DISTNAME DISTVNAME
+ ))
+ {
+ my $value = $attribs{$key} || $self->{$key};
+ $make .= "$key = $value\n";
}
return $make;
sub dist_ci {
my($self) = shift;
- my @m;
- push @m, q{
+ return q{
ci :
$(PERLRUN) "-MExtUtils::Manifest=maniread" \\
- -e "@all = keys %{ maniread() };" \\
- -e 'print("Executing $(CI) @all\n"); system("$(CI) @all");' \\
- -e 'print("Executing $(RCS_LABEL) ...\n"); system("$(RCS_LABEL) @all");'
+ -e "@all = keys %{ maniread() };" \\
+ -e "print(qq{Executing $(CI) @all\n}); system(qq{$(CI) @all});" \\
+ -e "print(qq{Executing $(RCS_LABEL) ...\n}); system(qq{$(RCS_LABEL) @all});"
};
- join "", @m;
}
=item dist_core (o)
-Defines the targets dist, tardist, zipdist, uutardist, shdist
+ my $dist_make_fragment = $MM->dist_core;
+
+Puts the targets necessary for 'make dist' together into one make
+fragment.
=cut
sub dist_core {
my($self) = shift;
- my @m;
- push @m, q{
-dist : $(DIST_DEFAULT)
- }.$self->{NOECHO}.q{$(PERL) -le 'print "Warning: Makefile possibly out of date with $$vf" if ' \
- -e '-e ($$vf="$(VERSION_FROM)") and -M $$vf < -M "}.$self->{MAKEFILE}.q{";'
+ my $make_frag = '';
+ foreach my $target (qw(dist tardist uutardist tarfile zipdist zipfile
+ shdist))
+ {
+ my $method = $target.'_target';
+ $make_frag .= "\n";
+ $make_frag .= $self->$method();
+ }
+
+ return $make_frag;
+}
+
+
+=item B<dist_target>
+
+ my $make_frag = $MM->dist_target;
+
+Returns the 'dist' target to make an archive for distribution. This
+target simply checks to make sure the Makefile is up-to-date and
+depends on $(DIST_DEFAULT).
+
+=cut
+
+sub dist_target {
+ my($self) = shift;
+
+ my $date_check = $self->oneliner(<<'CODE', ['-l']);
+print 'Warning: Makefile possibly out of date with $(VERSION_FROM)'
+ if -e '$(VERSION_FROM)' and -M '$(VERSION_FROM)' < -M '$(FIRST_MAKEFILE)';
+CODE
+
+ return sprintf <<'MAKE_FRAG', $date_check;
+dist : $(DIST_DEFAULT) $(FIRST_MAKEFILE)
+ $(NOECHO) %s
+MAKE_FRAG
+}
+
+=item B<tardist_target>
+
+ my $make_frag = $MM->tardist_target;
+
+Returns the 'tardist' target which is simply so 'make tardist' works.
+The real work is done by the dynamically named tardistfile_target()
+method, tardist should have that as a dependency.
+
+=cut
+
+sub tardist_target {
+ my($self) = shift;
+
+ return <<'MAKE_FRAG';
tardist : $(DISTVNAME).tar$(SUFFIX)
+ $(NOECHO) $(NOOP)
+MAKE_FRAG
+}
+
+=item B<zipdist_target>
+
+ my $make_frag = $MM->zipdist_target;
+
+Returns the 'zipdist' target which is simply so 'make zipdist' works.
+The real work is done by the dynamically named zipdistfile_target()
+method, zipdist should have that as a dependency.
+=cut
+
+sub zipdist_target {
+ my($self) = shift;
+
+ return <<'MAKE_FRAG';
zipdist : $(DISTVNAME).zip
+ $(NOECHO) $(NOOP)
+MAKE_FRAG
+}
+
+=item B<tarfile_target>
+
+ my $make_frag = $MM->tarfile_target;
+
+The name of this target is the name of the tarball generated by
+tardist. This target does the actual work of turning the distdir into
+a tarball.
+
+=cut
+sub tarfile_target {
+ my($self) = shift;
+
+ return <<'MAKE_FRAG';
$(DISTVNAME).tar$(SUFFIX) : distdir
$(PREOP)
$(TO_UNIX)
$(RM_RF) $(DISTVNAME)
$(COMPRESS) $(DISTVNAME).tar
$(POSTOP)
+MAKE_FRAG
+}
+
+=item zipfile_target
+
+ my $make_frag = $MM->zipfile_target;
+The name of this target is the name of the zip file generated by
+zipdist. This target does the actual work of turning the distdir into
+a zip file.
+
+=cut
+
+sub zipfile_target {
+ my($self) = shift;
+
+ return <<'MAKE_FRAG';
$(DISTVNAME).zip : distdir
$(PREOP)
$(ZIP) $(ZIPFLAGS) $(DISTVNAME).zip $(DISTVNAME)
$(RM_RF) $(DISTVNAME)
$(POSTOP)
+MAKE_FRAG
+}
+
+=item uutardist_target
+
+ my $make_frag = $MM->uutardist_target;
+
+Converts the tarfile into a uuencoded file
+
+=cut
+sub uutardist_target {
+ my($self) = shift;
+
+ return <<'MAKE_FRAG';
uutardist : $(DISTVNAME).tar$(SUFFIX)
- uuencode $(DISTVNAME).tar$(SUFFIX) \\
- $(DISTVNAME).tar$(SUFFIX) > \\
- $(DISTVNAME).tar$(SUFFIX)_uu
+ uuencode $(DISTVNAME).tar$(SUFFIX) $(DISTVNAME).tar$(SUFFIX) > $(DISTVNAME).tar$(SUFFIX)_uu
+MAKE_FRAG
+}
+
+
+=item shdist_target
+ my $make_frag = $MM->shdist_target;
+
+Converts the distdir into a shell archive.
+
+=cut
+
+sub shdist_target {
+ my($self) = shift;
+
+ return <<'MAKE_FRAG';
shdist : distdir
$(PREOP)
$(SHAR) $(DISTVNAME) > $(DISTVNAME).shar
$(RM_RF) $(DISTVNAME)
$(POSTOP)
-};
- join "", @m;
+MAKE_FRAG
}
-=item dist_dir
+=item distdir
Defines the scratch directory target that will hold the distribution
before tar-ing (or shar-ing).
=cut
-sub dist_dir {
+# For backwards compatibility.
+*dist_dir = *distdir;
+
+sub distdir {
my($self) = shift;
return <<'MAKE_FRAG';
-distdir :
+distdir : metafile metafile_addtomanifest signature
$(RM_RF) $(DISTVNAME)
$(PERLRUN) "-MExtUtils::Manifest=manicopy,maniread" \
-e "manicopy(maniread(),'$(DISTVNAME)', '$(DIST_CP)');"
push @m, q{
disttest : distdir
cd $(DISTVNAME) && $(ABSPERLRUN) Makefile.PL
- cd $(DISTVNAME) && $(MAKE)
- cd $(DISTVNAME) && $(MAKE) test
+ cd $(DISTVNAME) && $(MAKE) $(PASTHRU)
+ cd $(DISTVNAME) && $(MAKE) test $(PASTHRU)
};
join "", @m;
}
sub dlsyms {
my($self,%attribs) = @_;
- return '' unless ($^O eq 'aix' && $self->needs_linking() );
+ return '' unless ($Is_AIX && $self->needs_linking() );
my($funcs) = $attribs{DL_FUNCS} || $self->{DL_FUNCS} || {};
my($vars) = $attribs{DL_VARS} || $self->{DL_VARS} || [];
my($self) = shift;
'
-## $(INST_PM) has been moved to the all: target.
-## It remains here for awhile to allow for old usage: "make dynamic"
-#dynamic :: '.$self->{MAKEFILE}.' $(INST_DYNAMIC) $(INST_BOOT) $(INST_PM)
-dynamic :: '.$self->{MAKEFILE}.' $(INST_DYNAMIC) $(INST_BOOT)
- '.$self->{NOECHO}.'$(NOOP)
+dynamic :: $(FIRST_MAKEFILE) $(INST_DYNAMIC) $(INST_BOOT)
+ $(NOECHO) $(NOOP)
';
}
BOOTSTRAP =
' unless $self->has_link_code();
- return '
-BOOTSTRAP = '."$self->{BASEEXT}.bs".'
+ return <<'MAKE_FRAG';
+BOOTSTRAP = $(BASEEXT).bs
# As Mkbootstrap might not write a file (if none is required)
# we use touch to prevent make continually trying to remake it.
# The DynaLoader only reads a non-empty file.
-$(BOOTSTRAP): '."$self->{MAKEFILE} $self->{BOOTDEP}".' $(INST_ARCHAUTODIR)/.exists
- '.$self->{NOECHO}.'echo "Running Mkbootstrap for $(NAME) ($(BSLOADLIBS))"
- '.$self->{NOECHO}.'$(PERLRUN) \
+$(BOOTSTRAP): $(FIRST_MAKEFILE) $(BOOTDEP) blibdirs
+ $(NOECHO) $(ECHO) "Running Mkbootstrap for $(NAME) ($(BSLOADLIBS))"
+ $(NOECHO) $(PERLRUN) \
"-MExtUtils::Mkbootstrap" \
- -e "Mkbootstrap(\'$(BASEEXT)\',\'$(BSLOADLIBS)\');"
- '.$self->{NOECHO}.'$(TOUCH) $(BOOTSTRAP)
+ -e "Mkbootstrap('$(BASEEXT)','$(BSLOADLIBS)');"
+ $(NOECHO) $(TOUCH) $(BOOTSTRAP)
$(CHMOD) $(PERM_RW) $@
-$(INST_BOOT): $(BOOTSTRAP) $(INST_ARCHAUTODIR)/.exists
- '."$self->{NOECHO}$self->{RM_RF}".' $(INST_BOOT)
- -'.$self->{CP}.' $(BOOTSTRAP) $(INST_BOOT)
+$(INST_BOOT): $(BOOTSTRAP) blibdirs
+ $(NOECHO) $(RM_RF) $(INST_BOOT)
+ -$(CP) $(BOOTSTRAP) $(INST_BOOT)
$(CHMOD) $(PERM_RW) $@
-';
+MAKE_FRAG
}
=item dynamic_lib (o)
my($inst_dynamic_dep) = $attribs{INST_DYNAMIC_DEP} || "";
my($armaybe) = $attribs{ARMAYBE} || $self->{ARMAYBE} || ":";
my($ldfrom) = '$(LDFROM)';
- $armaybe = 'ar' if ($^O eq 'dec_osf' and $armaybe eq ':');
+ $armaybe = 'ar' if ($Is_OSF and $armaybe eq ':');
my(@m);
my $ld_opt = $Is_OS2 ? '$(OPTIMIZE) ' : ''; # Useful on other systems too?
+ my $ld_fix = $Is_OS2 ? '|| ( $(RM_F) $@ && sh -c false )' : '';
push(@m,'
# This section creates the dynamically loadable $(INST_DYNAMIC)
# from $(OBJECT) and possibly $(MYEXTLIB).
ARMAYBE = '.$armaybe.'
OTHERLDFLAGS = '.$ld_opt.$otherldflags.'
INST_DYNAMIC_DEP = '.$inst_dynamic_dep.'
+INST_DYNAMIC_FIX = '.$ld_fix.'
-$(INST_DYNAMIC): $(OBJECT) $(MYEXTLIB) $(BOOTSTRAP) $(INST_ARCHAUTODIR)/.exists $(EXPORT_LIST) $(PERL_ARCHIVE) $(PERL_ARCHIVE_AFTER) $(INST_DYNAMIC_DEP)
+$(INST_DYNAMIC): $(OBJECT) $(MYEXTLIB) $(BOOTSTRAP) blibdirs $(EXPORT_LIST) $(PERL_ARCHIVE) $(PERL_ARCHIVE_AFTER) $(INST_DYNAMIC_DEP)
');
if ($armaybe ne ':'){
$ldfrom = 'tmp$(LIB_EXT)';
push(@m,' $(ARMAYBE) cr '.$ldfrom.' $(OBJECT)'."\n");
push(@m,' $(RANLIB) '."$ldfrom\n");
}
- $ldfrom = "-all $ldfrom -none" if ($^O eq 'dec_osf');
+ $ldfrom = "-all $ldfrom -none" if $Is_OSF;
# The IRIX linker doesn't use LD_RUN_PATH
- my $ldrun = $^O eq 'irix' && $self->{LD_RUN_PATH} ?
+ my $ldrun = $Is_IRIX && $self->{LD_RUN_PATH} ?
qq{-rpath "$self->{LD_RUN_PATH}"} : '';
# For example in AIX the shared objects/libraries from previous builds
push(@m,' $(RM_F) $@
');
- my $libs = $self->{LDLOADLIBS} || '';
+ my $libs = '$(LDLOADLIBS)';
- if ($^O eq 'netbsd') {
+ if ($Is_NetBSD && $Config{'useshrplib'}) {
# Use nothing on static perl platforms, and to the flags needed
# to link against the shared libperl library on shared perl
# platforms. We peek at lddlflags to see if we need -Wl,-R
# or -R to add paths to the run-time library search path.
- if ($Config{'useshrplib'}) {
- if ($Config{'lddlflags'} =~ /-Wl,-R/) {
- $libs = '-L$(PERL_INC) -Wl,-R$(INSTALLARCHLIB)/CORE -lperl';
- } elsif ($Config{'lddlflags'} =~ /-R/) {
- $libs = '-L$(PERL_INC) -R$(INSTALLARCHLIB)/CORE -lperl';
- }
- }
+ if ($Config{'lddlflags'} =~ /-Wl,-R/) {
+ $libs .= ' -L$(PERL_INC) -Wl,-R$(INSTALLARCHLIB)/CORE -Wl,-R$(PERL_ARCHLIB)/CORE -lperl';
+ } elsif ($Config{'lddlflags'} =~ /-R/) {
+ $libs .= ' -L$(PERL_INC) -R$(INSTALLARCHLIB)/CORE -R$(PERL_ARCHLIB)/CORE -lperl';
+ }
}
push(@m,
' LD_RUN_PATH="$(LD_RUN_PATH)" $(LD) '.$ldrun.' $(LDDLFLAGS) '.$ldfrom.
-' $(OTHERLDFLAGS) -o $@ $(MYEXTLIB) $(PERL_ARCHIVE) '.$libs.' $(PERL_ARCHIVE_AFTER) $(EXPORT_LIST)');
+' $(OTHERLDFLAGS) -o $@ $(MYEXTLIB) $(PERL_ARCHIVE) '.$libs.' $(PERL_ARCHIVE_AFTER) $(EXPORT_LIST) $(INST_DYNAMIC_FIX)');
push @m, '
$(CHMOD) $(PERM_RWX) $@
';
- push @m, $self->dir_target('$(INST_ARCHAUTODIR)');
join('',@m);
}
my($self, $ver, $names, $dirs, $trace) = @_;
my($name, $dir);
if ($trace >= 2){
- print "Looking for perl $ver by these names:
+ print "Looking for perl $ver by these names:
@$names
in these dirs:
@$dirs
";
}
+
+ my $stderr_duped = 0;
+ local *STDERR_COPY;
+ unless ($Is_BSD) {
+ if( open(STDERR_COPY, '>&STDERR') ) {
+ $stderr_duped = 1;
+ }
+ else {
+ warn <<WARNING;
+find_perl() can't dup STDERR: $!
+You might see some garbage while we search for Perl
+WARNING
+ }
+ }
+
foreach $name (@$names){
- foreach $dir (@$dirs){
- next unless defined $dir; # $self->{PERL_SRC} may be undefined
- my ($abs, $val);
- if (File::Spec->file_name_is_absolute($name)) { # /foo/bar
- $abs = $name;
- } elsif (File::Spec->canonpath($name) eq File::Spec->canonpath(basename($name))) { # foo
- $abs = File::Spec->catfile($dir, $name);
- } else { # foo/bar
- $abs = File::Spec->canonpath(File::Spec->catfile($Curdir, $name));
- }
- print "Checking $abs\n" if ($trace >= 2);
- next unless $self->maybe_command($abs);
- print "Executing $abs\n" if ($trace >= 2);
- $val = `$abs -e 'require $ver; print "VER_OK\n" ' 2>&1`;
- if ($val =~ /VER_OK/) {
- print "Using PERL=$abs\n" if $trace;
- return $abs;
- } elsif ($trace >= 2) {
- print "Result: `$val'\n";
- }
- }
+ foreach $dir (@$dirs){
+ next unless defined $dir; # $self->{PERL_SRC} may be undefined
+ my ($abs, $val);
+ if ($self->file_name_is_absolute($name)) { # /foo/bar
+ $abs = $name;
+ } elsif ($self->canonpath($name) eq
+ $self->canonpath(basename($name))) { # foo
+ $abs = $self->catfile($dir, $name);
+ } else { # foo/bar
+ $abs = $self->catfile($Curdir, $name);
+ }
+ print "Checking $abs\n" if ($trace >= 2);
+ next unless $self->maybe_command($abs);
+ print "Executing $abs\n" if ($trace >= 2);
+
+ my $version_check = qq{$abs -le "require $ver; print qq{VER_OK}"};
+ # To avoid using the unportable 2>&1 to supress STDERR,
+ # we close it before running the command.
+ # However, thanks to a thread library bug in many BSDs
+ # ( http://www.freebsd.org/cgi/query-pr.cgi?pr=51535 )
+ # we cannot use the fancier more portable way in here
+ # but instead need to use the traditional 2>&1 construct.
+ if ($Is_BSD) {
+ $val = `$version_check 2>&1`;
+ } else {
+ close STDERR if $stderr_duped;
+ $val = `$version_check`;
+ open STDERR, '>&STDERR_COPY' if $stderr_duped;
+ }
+
+ if ($val =~ /^VER_OK/) {
+ print "Using PERL=$abs\n" if $trace;
+ return $abs;
+ } elsif ($trace >= 2) {
+ print "Result: '$val'\n";
+ }
+ }
}
print STDOUT "Unable to find a perl $ver (by these names: @$names, in these dirs: @$dirs)\n";
0; # false and not empty
}
+=item find_tests
+
+ my $test = $mm->find_tests;
+
+Returns a string suitable for feeding to the shell to return all
+tests in t/*.t.
+
+=cut
+
+sub find_tests {
+ my($self) = shift;
+ return 't/*.t';
+}
+
=back
=head2 Methods to actually produce chunks of text for the Makefile
my($does_shbang) = $Config{'sharpbang'} =~ /^\s*\#\!/;
for my $file (@files) {
+ my $file_new = "$file.new";
+ my $file_bak = "$file.bak";
+
local(*FIXIN);
local(*FIXOUT);
- open(FIXIN, $file) or Carp::croak "Can't process '$file': $!";
+ open(FIXIN, $file) or croak "Can't process '$file': $!";
local $/ = "\n";
chomp(my $line = <FIXIN>);
next unless $line =~ s/^\s*\#!\s*//; # Not a shbang file.
$interpreter = $Config{perlpath};
}
} else {
- my(@absdirs) = reverse grep {File::Spec->file_name_is_absolute} File::Spec->path;
+ my(@absdirs) = reverse grep {$self->file_name_is_absolute} $self->path;
$interpreter = '';
my($dir);
foreach $dir (@absdirs) {
if ($self->maybe_command($cmd)) {
warn "Ignoring $interpreter in $file\n" if $Verbose && $interpreter;
- $interpreter = File::Spec->catfile($dir,$cmd);
+ $interpreter = $self->catfile($dir,$cmd);
}
}
}
next;
}
- unless ( open(FIXOUT,">$file.new") ) {
+ unless ( open(FIXOUT,">$file_new") ) {
warn "Can't create new $file: $!\n";
next;
}
- my($dev,$ino,$mode) = stat FIXIN;
# Print out the new #! line (or equivalent).
local $\;
close FIXIN;
close FIXOUT;
- unless ( rename($file, "$file.bak") ) {
- warn "Can't rename $file to $file.bak: $!";
+ chmod 0666, $file_bak;
+ unlink $file_bak;
+ unless ( rename($file, $file_bak) ) {
+ warn "Can't rename $file to $file_bak: $!";
next;
}
- unless ( rename("$file.new", $file) ) {
- warn "Can't rename $file.new to $file: $!";
- unless ( rename("$file.bak", $file) ) {
- warn "Can't rename $file.bak back to $file either: $!";
- warn "Leaving $file renamed as $file.bak\n";
+ unless ( rename($file_new, $file) ) {
+ warn "Can't rename $file_new to $file: $!";
+ unless ( rename($file_bak, $file) ) {
+ warn "Can't rename $file_bak back to $file either: $!";
+ warn "Leaving $file renamed as $file_bak\n";
}
next;
}
- unlink "$file.bak";
+ unlink $file_bak;
} continue {
close(FIXIN) if fileno(FIXIN);
system("$Config{'eunicefix'} $file") if $Config{'eunicefix'} ne ':';;
my($self) = shift;
'# Phony target to force checking subdirectories.
FORCE:
- '.$self->{NOECHO}.'$(NOOP)
+ $(NOECHO) $(NOOP)
';
}
=item init_dirscan
-Initializes DIR, XS, PM, C, O_FILES, H, PL_FILES, MAN*PODS, EXE_FILES.
+Scans the directory structure and initializes DIR, XS, XS_FILES, PM,
+C, C_FILES, O_FILES, H, H_FILES, PL_FILES, MAN*PODS, EXE_FILES.
+
+Called by init_main.
=cut
sub init_dirscan { # --- File and Directory Lists (.xs .pm .pod etc)
my($self) = @_;
my($name, %dir, %xs, %c, %h, %ignore, %pl_files, %manifypods);
- local(%pm); #the sub in find() has to see this hash
+ my %pm;
@ignore{qw(Makefile.PL test.pl t)} = (1,1,1);
next unless $self->libscan($name);
if (-d $name){
next if -l $name; # We do not support symlinks at all
- $dir{$name} = $name if (-f File::Spec->catfile($name,"Makefile.PL"));
+ next if $self->{NORECURS};
+ $dir{$name} = $name if (-f $self->catfile($name,"Makefile.PL"));
} elsif ($name =~ /\.xs\z/){
my($c); ($c = $name) =~ s/\.xs\z/.c/;
$xs{$name} = $c;
($pl_files{$name} = $name) =~ s/[._]pl\z//i ;
}
else {
- $pm{$name} = File::Spec->catfile($self->{INST_LIBDIR},$name);
+ $pm{$name} = $self->catfile($self->{INST_LIBDIR},$name);
}
} elsif ($name =~ /\.(p[ml]|pod)\z/){
- $pm{$name} = File::Spec->catfile($self->{INST_LIBDIR},$name);
+ $pm{$name} = $self->catfile($self->{INST_LIBDIR},$name);
}
}
# (which includes PARENT_NAME). This is a subtle distinction but one
# that's important for nested modules.
- $self->{PMLIBDIRS} = ['lib', $self->{BASEEXT}]
- unless $self->{PMLIBDIRS};
+ unless( $self->{PMLIBDIRS} ) {
+ if( $Is_VMS ) {
+ # Avoid logical name vs directory collisions
+ $self->{PMLIBDIRS} = ['./lib', "./$self->{BASEEXT}"];
+ }
+ else {
+ $self->{PMLIBDIRS} = ['lib', $self->{BASEEXT}];
+ }
+ }
#only existing directories that aren't in $dir are allowed
require File::Find;
File::Find::find(sub {
if (-d $_){
- if ($_ eq "CVS" || $_ eq "RCS"){
+ unless ($self->libscan($_)){
$File::Find::prune = 1;
}
return;
}
return if /\#/;
return if /~$/; # emacs temp files
+ return if /,v$/; # RCS files
my $path = $File::Find::name;
my $prefix = $self->{INST_LIBDIR};
$prefix = $self->{INST_LIB}
if ($striplibpath = $path) =~ s:^(\W*)lib\W:$1:i;
- my($inst) = File::Spec->catfile($prefix,$striplibpath);
+ my($inst) = $self->catfile($prefix,$striplibpath);
local($_) = $inst; # for backwards compatibility
$inst = $self->libscan($inst);
print "libscan($path) => '$inst'\n" if ($Verbose >= 2);
}, @{$self->{PMLIBDIRS}});
}
- $self->{DIR} = [sort keys %dir] unless $self->{DIR};
- $self->{XS} = \%xs unless $self->{XS};
- $self->{PM} = \%pm unless $self->{PM};
- $self->{C} = [sort keys %c] unless $self->{C};
- my(@o_files) = @{$self->{C}};
- $self->{O_FILES} = [grep s/\.c(pp|xx|c)?\z/$self->{OBJ_EXT}/i, @o_files] ;
- $self->{H} = [sort keys %h] unless $self->{H};
- $self->{PL_FILES} = \%pl_files unless $self->{PL_FILES};
+ $self->{PM} ||= \%pm;
+ $self->{PL_FILES} ||= \%pl_files;
+
+ $self->{DIR} ||= [sort keys %dir];
+
+ $self->{XS} ||= \%xs;
+ $self->{C} ||= [sort keys %c];
+ my @o_files = @{$self->{C}};
+ $self->{O_FILES} = [grep s/\.c(pp|xx|c)?\z/$self->{OBJ_EXT}/i, @o_files];
+
+ $self->{H} ||= [sort keys %h];
# Set up names of manual pages to generate from pods
my %pods;
my($ispod)=0;
if (open(FH,"<$name")) {
while (<FH>) {
- if (/^=head1\s+\w+/) {
+ if (/^=(?:head\d+|item|pod)\b/) {
$ispod=1;
last;
}
next unless $ispod;
if ($pods{MAN1}) {
$self->{MAN1PODS}->{$name} =
- File::Spec->catfile("\$(INST_MAN1DIR)", basename($name).".\$(MAN1EXT)");
+ $self->catfile("\$(INST_MAN1DIR)", basename($name).".\$(MAN1EXT)");
}
}
}
}
my($manpagename) = $name;
$manpagename =~ s/\.p(od|m|l)\z//;
- unless ($manpagename =~ s!^\W*lib\W+!!s) { # everything below lib is ok
- $manpagename = File::Spec->catfile(split(/::/,$self->{PARENT_NAME}),$manpagename);
+ # everything below lib is ok
+ unless($manpagename =~ s!^\W*lib\W+!!s) {
+ $manpagename = $self->catfile(
+ split(/::/,$self->{PARENT_NAME}),$manpagename
+ );
}
if ($pods{MAN3}) {
$manpagename = $self->replace_manpage_separator($manpagename);
$self->{MAN3PODS}->{$name} =
- File::Spec->catfile("\$(INST_MAN3DIR)", "$manpagename.\$(MAN3EXT)");
+ $self->catfile("\$(INST_MAN3DIR)", "$manpagename.\$(MAN3EXT)");
}
}
}
}
+=item init_DIRFILESEP
+
+Using / for Unix. Called by init_main.
+
+=cut
+
+sub init_DIRFILESEP {
+ my($self) = shift;
+
+ $self->{DIRFILESEP} = '/';
+}
+
+
=item init_main
Initializes AR, AR_STATIC_ARGS, BASEEXT, CONFIG, DISTNAME, DLBASE,
EXE_EXT, FULLEXT, FULLPERL, FULLPERLRUN, FULLPERLRUNINST, INST_*,
-INSTALL*, INSTALLDIRS, LD, LIB_EXT, LIBPERL_A, MAP_TARGET, NAME,
+INSTALL*, INSTALLDIRS, LIB_EXT, LIBPERL_A, MAP_TARGET, NAME,
OBJ_EXT, PARENT_NAME, PERL, PERL_ARCHLIB, PERL_INC, PERL_LIB,
PERL_SRC, PERLRUN, PERLRUNINST, PREFIX, VERSION,
-VERSION_FROM, VERSION_SYM, XS_VERSION.
+VERSION_SYM, XS_VERSION.
=cut
### Only UNIX:
### ($self->{FULLEXT} =
### $self->{NAME}) =~ s!::!/!g ; #eg. BSD/Foo/Socket
- $self->{FULLEXT} = File::Spec->catdir(split /::/, $self->{NAME});
+ $self->{FULLEXT} = $self->catdir(split /::/, $self->{NAME});
# Copied from DynaLoader:
unless ($self->{PERL_SRC}){
my($dir);
foreach $dir ($Updir,
- File::Spec->catdir($Updir,$Updir),
- File::Spec->catdir($Updir,$Updir,$Updir),
- File::Spec->catdir($Updir,$Updir,$Updir,$Updir),
- File::Spec->catdir($Updir,$Updir,$Updir,$Updir,$Updir))
+ $self->catdir($Updir,$Updir),
+ $self->catdir($Updir,$Updir,$Updir),
+ $self->catdir($Updir,$Updir,$Updir,$Updir),
+ $self->catdir($Updir,$Updir,$Updir,$Updir,$Updir))
{
if (
- -f File::Spec->catfile($dir,"config_h.SH")
+ -f $self->catfile($dir,"config_h.SH")
&&
- -f File::Spec->catfile($dir,"perl.h")
+ -f $self->catfile($dir,"perl.h")
&&
- -f File::Spec->catfile($dir,"lib","Exporter.pm")
+ -f $self->catfile($dir,"lib","Exporter.pm")
) {
$self->{PERL_SRC}=$dir ;
last;
$self->{PERL_CORE} and !$self->{PERL_SRC};
if ($self->{PERL_SRC}){
- $self->{PERL_LIB} ||= File::Spec->catdir("$self->{PERL_SRC}","lib");
- $self->{PERL_ARCHLIB} = $self->{PERL_LIB};
- $self->{PERL_INC} = ($Is_Win32 || $Is_NetWare) ? File::Spec->catdir($self->{PERL_LIB},"CORE") : $self->{PERL_SRC};
+ $self->{PERL_LIB} ||= $self->catdir("$self->{PERL_SRC}","lib");
+
+ if (defined $Cross::platform) {
+ $self->{PERL_ARCHLIB} =
+ $self->catdir("$self->{PERL_SRC}","xlib",$Cross::platform);
+ $self->{PERL_INC} =
+ $self->catdir("$self->{PERL_SRC}","xlib",$Cross::platform,
+ $Is_Win32?("CORE"):());
+ }
+ else {
+ $self->{PERL_ARCHLIB} = $self->{PERL_LIB};
+ $self->{PERL_INC} = ($Is_Win32) ?
+ $self->catdir($self->{PERL_LIB},"CORE") : $self->{PERL_SRC};
+ }
# catch a situation that has occurred a few times in the past:
unless (
- -s File::Spec->catfile($self->{PERL_SRC},'cflags')
+ -s $self->catfile($self->{PERL_SRC},'cflags')
or
$Is_VMS
&&
- -s File::Spec->catfile($self->{PERL_SRC},'perlshr_attr.opt')
+ -s $self->catfile($self->{PERL_SRC},'perlshr_attr.opt')
or
$Is_Mac
or
$Is_Win32
- or
- $Is_NetWare
){
warn qq{
You cannot build extensions below the perl source tree after executing
my $old = $self->{PERL_LIB} || $self->{PERL_ARCHLIB} || $self->{PERL_INC};
$self->{PERL_LIB} ||= $Config{privlibexp};
$self->{PERL_ARCHLIB} ||= $Config{archlibexp};
- $self->{PERL_INC} = File::Spec->catdir("$self->{PERL_ARCHLIB}","CORE"); # wild guess for now
+ $self->{PERL_INC} = $self->catdir("$self->{PERL_ARCHLIB}","CORE"); # wild guess for now
my $perl_h;
- no warnings 'uninitialized' ;
- if (not -f ($perl_h = File::Spec->catfile($self->{PERL_INC},"perl.h"))
+ if (not -f ($perl_h = $self->catfile($self->{PERL_INC},"perl.h"))
and not $old){
# Maybe somebody tries to build an extension with an
# uninstalled Perl outside of Perl build tree
my $found;
for my $dir (@INC) {
- $found = $dir, last if -e File::Spec->catdir($dir, "Config.pm");
+ $found = $dir, last if -e $self->catdir($dir, "Config.pm");
}
if ($found) {
my $inc = dirname $found;
- if (-e File::Spec->catdir($inc, "perl.h")) {
+ if (-e $self->catdir($inc, "perl.h")) {
$self->{PERL_LIB} = $found;
$self->{PERL_ARCHLIB} = $found;
$self->{PERL_INC} = $inc;
EOP
}
}
- }
-
- unless(-f ($perl_h = File::Spec->catfile($self->{PERL_INC},"perl.h")))
- {
- die qq{
-Error: Unable to locate installed Perl libraries or Perl source code.
-
-It is recommended that you install perl in a standard location before
-building extensions. Some precompiled versions of perl do not contain
-these header files, so you cannot build extensions. In such a case,
-please build and install your perl from a fresh perl distribution. It
-usually solves this kind of problem.
-
-\(You get this message, because MakeMaker could not find "$perl_h"\)
-};
- }
-# print STDOUT "Using header files found in $self->{PERL_INC}\n"
-# if $Verbose && $self->needs_linking();
-
+ }
}
# We get SITELIBEXP and SITEARCHEXP directly via
# MakeMaker.
$self->{INSTALLDIRS} ||= "site";
-
- $self->init_INST;
- $self->init_INSTALL;
-
$self->{MAN1EXT} ||= $Config{man1ext};
$self->{MAN3EXT} ||= $Config{man3ext};
$self->{CONFIG} = [] unless (ref $self->{CONFIG});
push(@{$self->{CONFIG}}, @ExtUtils::MakeMaker::Get_from_Config);
push(@{$self->{CONFIG}}, 'shellflags') if $Config{shellflags};
- my(%once_only,$m);
- foreach $m (@{$self->{CONFIG}}){
+ my(%once_only);
+ foreach my $m (@{$self->{CONFIG}}){
next if $once_only{$m};
print STDOUT "CONFIG key '$m' does not exist in Config.pm\n"
unless exists $Config{$m};
$self->{AR_STATIC_ARGS} ||= "cr";
# These should never be needed
- $self->{LD} ||= 'ld';
$self->{OBJ_EXT} ||= '.o';
$self->{LIB_EXT} ||= '.a';
# make a simple check if we find Exporter
warn "Warning: PERL_LIB ($self->{PERL_LIB}) seems not to be a perl library directory
(Exporter.pm not found)"
- unless -f File::Spec->catfile("$self->{PERL_LIB}","Exporter.pm") ||
+ unless -f $self->catfile("$self->{PERL_LIB}","Exporter.pm") ||
$self->{NAME} eq "ExtUtils::MakeMaker";
-
- # Determine VERSION and VERSION_FROM
- ($self->{DISTNAME}=$self->{NAME}) =~ s#(::)#-#g unless $self->{DISTNAME};
- if ($self->{VERSION_FROM}){
- $self->{VERSION} = $self->parse_version($self->{VERSION_FROM}) or
- Carp::carp "WARNING: Setting VERSION via file '$self->{VERSION_FROM}' failed\n"
- }
-
- # strip blanks
- if ($self->{VERSION}) {
- $self->{VERSION} =~ s/^\s+//;
- $self->{VERSION} =~ s/\s+$//;
- }
-
- $self->{VERSION} ||= "0.10";
- ($self->{VERSION_SYM} = $self->{VERSION}) =~ s/\W/_/g;
-
- $self->{DISTVNAME} = "$self->{DISTNAME}-$self->{VERSION}";
-
- # Graham Barr and Paul Marquess had some ideas how to ensure
- # version compatibility between the *.pm file and the
- # corresponding *.xs file. The bottomline was, that we need an
- # XS_VERSION macro that defaults to VERSION:
- $self->{XS_VERSION} ||= $self->{VERSION};
-
-
- # --- Initialize Perl Binary Locations
- $self->init_PERL;
}
=item init_others
-Initializes EXTRALIBS, BSLOADLIBS, LDLOADLIBS, LIBS, LD_RUN_PATH,
-OBJECT, BOOTDEP, PERLMAINCC, LDFROM, LINKTYPE, NOOP, FIRST_MAKEFILE,
-MAKEFILE, NOECHO, RM_F, RM_RF, TEST_F, TOUCH, CP, MV, CHMOD, UMASK_NULL
+Initializes EXTRALIBS, BSLOADLIBS, LDLOADLIBS, LIBS, LD_RUN_PATH, LD,
+OBJECT, BOOTDEP, PERLMAINCC, LDFROM, LINKTYPE, SHELL, NOOP,
+FIRST_MAKEFILE, MAKEFILE_OLD, NOECHO, RM_F, RM_RF, TEST_F,
+TOUCH, CP, MV, CHMOD, UMASK_NULL, ECHO, ECHO_N
=cut
sub init_others { # --- Initialize Other Attributes
my($self) = shift;
+ $self->{LD} ||= 'ld';
+
# Compute EXTRALIBS, BSLOADLIBS and LDLOADLIBS from $self->{LIBS}
# Lets look at $self->{LIBS} carefully: It may be an anon array, a string or
# undefined. In any case we turn it into an anon array:
# May check $Config{libs} too, thus not empty.
- $self->{LIBS}=[''] unless $self->{LIBS};
+ $self->{LIBS} = [$self->{LIBS}] unless ref $self->{LIBS};
- $self->{LIBS}=[$self->{LIBS}] if ref \$self->{LIBS} eq 'SCALAR';
+ $self->{LIBS} = [''] unless @{$self->{LIBS}} && defined $self->{LIBS}[0];
$self->{LD_RUN_PATH} = "";
my($libs);
foreach $libs ( @{$self->{LIBS}} ){
: ($Config{usedl} ? 'dynamic' : 'static');
};
- # These get overridden for VMS and maybe some other systems
- $self->{NOOP} ||= '$(SHELL) -c true';
- $self->{FIRST_MAKEFILE} ||= "Makefile";
- $self->{MAKEFILE} ||= $self->{FIRST_MAKEFILE};
- $self->{MAKE_APERL_FILE} ||= "Makefile.aperl";
- $self->{NOECHO} = '@' unless defined $self->{NOECHO};
- $self->{RM_F} ||= "rm -f";
- $self->{RM_RF} ||= "rm -rf";
- $self->{TOUCH} ||= "touch";
- $self->{TEST_F} ||= "test -f";
- $self->{CP} ||= "cp";
- $self->{MV} ||= "mv";
- $self->{CHMOD} ||= "chmod";
- $self->{UMASK_NULL} ||= "umask 0";
- $self->{DEV_NULL} ||= "> /dev/null 2>&1";
+ $self->{NOOP} ||= '$(SHELL) -c true';
+ $self->{NOECHO} = '@' unless defined $self->{NOECHO};
+
+ $self->{FIRST_MAKEFILE} ||= 'Makefile';
+ $self->{MAKEFILE} ||= $self->{FIRST_MAKEFILE};
+ $self->{MAKEFILE_OLD} ||= $self->{MAKEFILE}.'.old';
+ $self->{MAKE_APERL_FILE} ||= $self->{MAKEFILE}.'.aperl';
+
+ $self->{SHELL} ||= $Config{sh} || '/bin/sh';
+
+ $self->{ECHO} ||= 'echo';
+ $self->{ECHO_N} ||= 'echo -n';
+ $self->{RM_F} ||= "rm -f";
+ $self->{RM_RF} ||= "rm -rf";
+ $self->{TOUCH} ||= "touch";
+ $self->{TEST_F} ||= "test -f";
+ $self->{CP} ||= "cp";
+ $self->{MV} ||= "mv";
+ $self->{CHMOD} ||= "chmod";
+ $self->{MKPATH} ||= '$(PERLRUN) "-MExtUtils::Command" -e mkpath';
+ $self->{EQUALIZE_TIMESTAMP} ||=
+ '$(PERLRUN) "-MExtUtils::Command" -e eqtime';
+
+ $self->{UNINST} ||= 0;
+ $self->{VERBINST} ||= 0;
+ $self->{MOD_INSTALL} ||=
+ $self->oneliner(<<'CODE', ['-MExtUtils::Install']);
+install({@ARGV}, '$(VERBINST)', 0, '$(UNINST)');
+CODE
+ $self->{DOC_INSTALL} ||=
+ '$(PERLRUN) "-MExtUtils::Command::MM" -e perllocal_install';
+ $self->{UNINSTALL} ||=
+ '$(PERLRUN) "-MExtUtils::Command::MM" -e uninstall';
+ $self->{WARN_IF_OLD_PACKLIST} ||=
+ '$(PERLRUN) "-MExtUtils::Command::MM" -e warn_if_old_packlist';
+
+ $self->{UMASK_NULL} ||= "umask 0";
+ $self->{DEV_NULL} ||= "> /dev/null 2>&1";
+
+ return 1;
}
=item init_INST
$mm->init_INST;
-Called by init_main. Sets up all INST_* variables.
+Called by init_main. Sets up all INST_* variables except those related
+to XS code. Those are handled in init_xs.
=cut
sub init_INST {
my($self) = shift;
- $self->{INST_ARCHLIB} ||= File::Spec->catdir($Curdir,"blib","arch");
- $self->{INST_BIN} ||= File::Spec->catdir($Curdir,'blib','bin');
+ $self->{INST_ARCHLIB} ||= $self->catdir($Curdir,"blib","arch");
+ $self->{INST_BIN} ||= $self->catdir($Curdir,'blib','bin');
# INST_LIB typically pre-set if building an extension after
# perl has been built and installed. Setting INST_LIB allows
# you to build directly into, say $Config{privlibexp}.
unless ($self->{INST_LIB}){
if ($self->{PERL_CORE}) {
- $self->{INST_LIB} = $self->{INST_ARCHLIB} = $self->{PERL_LIB};
+ if (defined $Cross::platform) {
+ $self->{INST_LIB} = $self->{INST_ARCHLIB} =
+ $self->catdir($self->{PERL_LIB},"..","xlib",
+ $Cross::platform);
+ }
+ else {
+ $self->{INST_LIB} = $self->{INST_ARCHLIB} = $self->{PERL_LIB};
+ }
} else {
- $self->{INST_LIB} = File::Spec->catdir($Curdir,"blib","lib");
+ $self->{INST_LIB} = $self->catdir($Curdir,"blib","lib");
}
}
my @parentdir = split(/::/, $self->{PARENT_NAME});
- $self->{INST_LIBDIR} = File::Spec->catdir($self->{INST_LIB},@parentdir);
- $self->{INST_ARCHLIBDIR} = File::Spec->catdir($self->{INST_ARCHLIB},
- @parentdir);
- $self->{INST_AUTODIR} = File::Spec->catdir($self->{INST_LIB},'auto',
- $self->{FULLEXT});
- $self->{INST_ARCHAUTODIR} = File::Spec->catdir($self->{INST_ARCHLIB},
- 'auto',$self->{FULLEXT});
+ $self->{INST_LIBDIR} = $self->catdir('$(INST_LIB)', @parentdir);
+ $self->{INST_ARCHLIBDIR} = $self->catdir('$(INST_ARCHLIB)', @parentdir);
+ $self->{INST_AUTODIR} = $self->catdir('$(INST_LIB)', 'auto',
+ '$(FULLEXT)');
+ $self->{INST_ARCHAUTODIR} = $self->catdir('$(INST_ARCHLIB)', 'auto',
+ '$(FULLEXT)');
- $self->{INST_SCRIPT} ||= File::Spec->catdir($Curdir,'blib','script');
+ $self->{INST_SCRIPT} ||= $self->catdir($Curdir,'blib','script');
- $self->{INST_MAN1DIR} ||= File::Spec->catdir($Curdir,'blib','man1');
- $self->{INST_MAN3DIR} ||= File::Spec->catdir($Curdir,'blib','man3');
+ $self->{INST_MAN1DIR} ||= $self->catdir($Curdir,'blib','man1');
+ $self->{INST_MAN3DIR} ||= $self->catdir($Curdir,'blib','man3');
return 1;
}
$mm->init_INSTALL;
Called by init_main. Sets up all INSTALL_* variables (except
-INSTALLDIRS) and PREFIX.
+INSTALLDIRS) and *PREFIX.
=cut
sub init_INSTALL {
my($self) = shift;
- # The user who requests an installation directory explicitly
- # should not have to tell us an architecture installation directory
- # as well. We look if a directory exists that is named after the
- # architecture. If not we take it as a sign that it should be the
- # same as the requested installation directory. Otherwise we take
- # the found one.
- # We do the same thing twice: for privlib/archlib and for sitelib/sitearch
- for my $libpair ({l=>"privlib", a=>"archlib"},
- {l=>"sitelib", a=>"sitearch"})
- {
- my $lib = "install$libpair->{l}";
- my $Lib = uc $lib;
- my $Arch = uc "install$libpair->{a}";
- if( $self->{$Lib} && ! $self->{$Arch} ){
- my($ilib) = $Config{$lib};
- $ilib = VMS::Filespec::unixify($ilib) if $Is_VMS;
+ $self->init_lib2arch;
- $self->prefixify($Arch,$ilib,$self->{$Lib});
+ # There are often no Config.pm defaults for these new man variables so
+ # we fall back to the old behavior which is to use installman*dir
+ foreach my $num (1, 3) {
+ my $k = 'installsiteman'.$num.'dir';
- unless (-d $self->{$Arch}) {
- print STDOUT "Directory $self->{$Arch} not found\n"
- if $Verbose;
- $self->{$Arch} = $self->{$Lib};
- }
- print STDOUT "Defaulting $Arch to $self->{$Arch}\n" if $Verbose;
+ $self->{uc $k} ||= uc "\$(installman${num}dir)"
+ unless $Config{$k};
+ }
+
+ foreach my $num (1, 3) {
+ my $k = 'installvendorman'.$num.'dir';
+
+ unless( $Config{$k} ) {
+ $self->{uc $k} ||= $Config{usevendorprefix}
+ ? uc "\$(installman${num}dir)"
+ : '';
}
}
- # There are no Config.pm defaults for these.
- $Config_Override{installsiteman1dir} =
- "$Config{siteprefixexp}/man/man\$(MAN1EXT)";
- $Config_Override{installsiteman3dir} =
- "$Config{siteprefixexp}/man/man\$(MAN3EXT)";
- $Config_Override{installvendorman1dir} =
- "$Config{vendorprefixexp}/man/man\$(MAN1EXT)";
- $Config_Override{installvendorman3dir} =
- "$Config{vendorprefixexp}/man/man\$(MAN3EXT)";
+ $self->{INSTALLSITEBIN} ||= '$(INSTALLBIN)'
+ unless $Config{installsitebin};
+
+ unless( $Config{installvendorbin} ) {
+ $self->{INSTALLVENDORBIN} ||= $Config{usevendorprefix}
+ ? $Config{installbin}
+ : '';
+ }
+
- my $iprefix = $Config{installprefixexp} || '';
- my $vprefix = $Config{vendorprefixexp} || $iprefix;
+ my $iprefix = $Config{installprefixexp} || $Config{installprefix} ||
+ $Config{prefixexp} || $Config{prefix} || '';
+ my $vprefix = $Config{usevendorprefix} ? $Config{vendorprefixexp} : '';
my $sprefix = $Config{siteprefixexp} || '';
- my $u_prefix = $self->{PREFIX} || '';
- my $u_sprefix = $self->{SITEPREFIX} || $u_prefix;
- my $u_vprefix = $self->{VENDORPREFIX} || $u_prefix;
+ # 5.005_03 doesn't have a siteprefix.
+ $sprefix = $iprefix unless $sprefix;
- $self->{PREFIX} ||= $u_prefix || $iprefix;
- $self->{SITEPREFIX} ||= $u_sprefix || $sprefix;
- $self->{VENDORPREFIX} ||= $u_vprefix || $vprefix;
+
+ $self->{PREFIX} ||= '';
+
+ if( $self->{PREFIX} ) {
+ @{$self}{qw(PERLPREFIX SITEPREFIX VENDORPREFIX)} =
+ ('$(PREFIX)') x 3;
+ }
+ else {
+ $self->{PERLPREFIX} ||= $iprefix;
+ $self->{SITEPREFIX} ||= $sprefix;
+ $self->{VENDORPREFIX} ||= $vprefix;
+
+ # Lots of MM extension authors like to use $(PREFIX) so we
+ # put something sensible in there no matter what.
+ $self->{PREFIX} = '$('.uc $self->{INSTALLDIRS}.'PREFIX)';
+ }
my $arch = $Config{archname};
my $version = $Config{version};
# default style
- my $libstyle = 'lib/perl5';
+ my $libstyle = $Config{installstyle} || 'lib/perl5';
my $manstyle = '';
if( $self->{LIBSTYLE} ) {
$manstyle = $self->{LIBSTYLE} eq 'lib/perl5' ? 'lib/perl5' : '';
}
+ # Some systems, like VOS, set installman*dir to '' if they can't
+ # read man pages.
+ for my $num (1, 3) {
+ $self->{'INSTALLMAN'.$num.'DIR'} ||= 'none'
+ unless $Config{'installman'.$num.'dir'};
+ }
+
my %bin_layouts =
(
bin => { s => $iprefix,
- r => '$(PREFIX)',
+ t => 'perl',
d => 'bin' },
vendorbin => { s => $vprefix,
- r => '$(VENDORPREFIX)',
+ t => 'vendor',
d => 'bin' },
sitebin => { s => $sprefix,
- r => '$(SITEPREFIX)',
+ t => 'site',
d => 'bin' },
script => { s => $iprefix,
- r => '$(PREFIX)',
+ t => 'perl',
d => 'bin' },
);
my %man_layouts =
(
man1dir => { s => $iprefix,
- r => '$(PREFIX)',
- d => 'man/man$(MAN1EXT)',
+ t => 'perl',
+ d => 'man/man1',
style => $manstyle, },
siteman1dir => { s => $sprefix,
- r => '$(SITEPREFIX)',
- d => 'man/man$(MAN1EXT)',
+ t => 'site',
+ d => 'man/man1',
style => $manstyle, },
vendorman1dir => { s => $vprefix,
- r => '$(VENDORPREFIX)',
- d => 'man/man$(MAN1EXT)',
+ t => 'vendor',
+ d => 'man/man1',
style => $manstyle, },
man3dir => { s => $iprefix,
- r => '$(PREFIX)',
- d => 'man/man$(MAN3EXT)',
+ t => 'perl',
+ d => 'man/man3',
style => $manstyle, },
siteman3dir => { s => $sprefix,
- r => '$(SITEPREFIX)',
- d => 'man/man$(MAN3EXT)',
+ t => 'site',
+ d => 'man/man3',
style => $manstyle, },
vendorman3dir => { s => $vprefix,
- r => '$(VENDORPREFIX)',
- d => 'man/man$(MAN3EXT)',
+ t => 'vendor',
+ d => 'man/man3',
style => $manstyle, },
);
my %lib_layouts =
(
privlib => { s => $iprefix,
- r => '$(PREFIX)',
+ t => 'perl',
d => '',
style => $libstyle, },
vendorlib => { s => $vprefix,
- r => '$(VENDORPREFIX)',
+ t => 'vendor',
d => '',
style => $libstyle, },
sitelib => { s => $sprefix,
- r => '$(SITEPREFIX)',
+ t => 'site',
d => 'site_perl',
style => $libstyle, },
archlib => { s => $iprefix,
- r => '$(PREFIX)',
+ t => 'perl',
d => "$version/$arch",
style => $libstyle },
vendorarch => { s => $vprefix,
- r => '$(VENDORPREFIX)',
+ t => 'vendor',
d => "$version/$arch",
style => $libstyle },
sitearch => { s => $sprefix,
- r => '$(SITEPREFIX)',
+ t => 'site',
d => "site_perl/$version/$arch",
style => $libstyle },
);
if( $var =~ /arch/ ) {
$self->{$Installvar} ||=
- File::Spec->catdir($self->{LIB}, $Config{archname});
+ $self->catdir($self->{LIB}, $Config{archname});
}
else {
$self->{$Installvar} ||= $self->{LIB};
}
}
+ my %type2prefix = ( perl => 'PERLPREFIX',
+ site => 'SITEPREFIX',
+ vendor => 'VENDORPREFIX'
+ );
my %layouts = (%bin_layouts, %man_layouts, %lib_layouts);
while( my($var, $layout) = each(%layouts) ) {
- my($s, $r, $d, $style) = @{$layout}{qw(s r d style)};
+ my($s, $t, $d, $style) = @{$layout}{qw(s t d style)};
+ my $r = '$('.$type2prefix{$t}.')';
print STDERR "Prefixing $var\n" if $Verbose >= 2;
my $Installvar = uc $installvar;
next if $self->{$Installvar};
- if( $r ) {
- $d = "$style/$d" if $style;
- $self->prefixify($installvar, $s, $r, $d);
- }
- else {
- $self->{$Installvar} = $Config_Override{$installvar} ||
- $Config{$installvar};
- }
+ $d = "$style/$d" if $style;
+ $self->prefixify($installvar, $s, $r, $d);
print STDERR " $Installvar == $self->{$Installvar}\n"
if $Verbose >= 2;
}
- $self->{PREFIX} ||= $iprefix;
+ # Generate these if they weren't figured out.
+ $self->{VENDORARCHEXP} ||= $self->{INSTALLVENDORARCH};
+ $self->{VENDORLIBEXP} ||= $self->{INSTALLVENDORLIB};
return 1;
}
+=item init_linker
+
+Unix has no need of special linker flags.
+
+=cut
+
+sub init_linker {
+ my($self) = shift;
+ $self->{PERL_ARCHIVE} ||= '';
+ $self->{PERL_ARCHIVE_AFTER} ||= '';
+ $self->{EXPORT_LIST} ||= '';
+}
+
+
+=begin _protected
+
+=item init_lib2arch
+
+ $mm->init_lib2arch
+
+=end _protected
+
+=cut
+
+sub init_lib2arch {
+ my($self) = shift;
+
+ # The user who requests an installation directory explicitly
+ # should not have to tell us an architecture installation directory
+ # as well. We look if a directory exists that is named after the
+ # architecture. If not we take it as a sign that it should be the
+ # same as the requested installation directory. Otherwise we take
+ # the found one.
+ for my $libpair ({l=>"privlib", a=>"archlib"},
+ {l=>"sitelib", a=>"sitearch"},
+ {l=>"vendorlib", a=>"vendorarch"},
+ )
+ {
+ my $lib = "install$libpair->{l}";
+ my $Lib = uc $lib;
+ my $Arch = uc "install$libpair->{a}";
+ if( $self->{$Lib} && ! $self->{$Arch} ){
+ my($ilib) = $Config{$lib};
+
+ $self->prefixify($Arch,$ilib,$self->{$Lib});
+
+ unless (-d $self->{$Arch}) {
+ print STDOUT "Directory $self->{$Arch} not found\n"
+ if $Verbose;
+ $self->{$Arch} = $self->{$Lib};
+ }
+ print STDOUT "Defaulting $Arch to $self->{$Arch}\n" if $Verbose;
+ }
+ }
+}
+
=item init_PERL
PERL is allowed to be miniperl
FULLPERL must be a complete perl
+
ABSPERL is PERL converted to an absolute path
*PERLRUN contains everything necessary to run perl, find it's
}
# Build up a set of file names (not command names).
- my $thisperl = File::Spec->canonpath($^X);
- $thisperl .= $Config{exe_ext} unless $thisperl =~ m/$Config{exe_ext}$/i;
+ my $thisperl = $self->canonpath($^X);
+ $thisperl .= $Config{exe_ext} unless
+ # VMS might have a file version # at the end
+ $Is_VMS ? $thisperl =~ m/$Config{exe_ext}(;\d+)?$/i
+ : $thisperl =~ m/$Config{exe_ext}$/i;
+
+ # We need a relative path to perl when in the core.
+ $thisperl = $self->abs2rel($thisperl) if $self->{PERL_CORE};
+
my @perls = ($thisperl);
push @perls, map { "$_$Config{exe_ext}" }
('perl', 'perl5', "perl$Config{version}");
# don't check if perl is executable, maybe they have decided to
# supply switches with perl
+ # When built for debugging, VMS doesn't create perl.exe but ndbgperl.exe.
+ my $perl_name = 'perl';
+ $perl_name = 'ndbgperl' if $Is_VMS &&
+ defined $Config{usevmsdebug} && $Config{usevmsdebug} eq 'define';
+
+ # XXX This logic is flawed. If "miniperl" is anywhere in the path
+ # it will get confused. It should be fixed to work only on the filename.
# Define 'FULLPERL' to be a non-miniperl (used in test: target)
- ($self->{FULLPERL} = $self->{PERL}) =~ s/miniperl/perl/i
+ ($self->{FULLPERL} = $self->{PERL}) =~ s/miniperl/$perl_name/i
unless $self->{FULLPERL};
# Little hack to get around VMS's find_perl putting "MCR" in front
# sometimes.
$self->{ABSPERL} = $self->{PERL};
my $has_mcr = $self->{ABSPERL} =~ s/^MCR\s*//;
- if( File::Spec->file_name_is_absolute($self->{ABSPERL}) ) {
+ if( $self->file_name_is_absolute($self->{ABSPERL}) ) {
$self->{ABSPERL} = '$(PERL)';
}
else {
- $self->{ABSPERL} = File::Spec->rel2abs($self->{ABSPERL});
+ $self->{ABSPERL} = $self->rel2abs($self->{ABSPERL});
$self->{ABSPERL} = 'MCR '.$self->{ABSPERL} if $has_mcr;
}
# How do we run perl?
foreach my $perl (qw(PERL FULLPERL ABSPERL)) {
- $self->{$perl.'RUN'} = "\$($perl)";
+ my $run = $perl.'RUN';
+
+ $self->{$run} = "\$($perl)";
# Make sure perl can find itself before it's installed.
- $self->{$perl.'RUN'} .= q{ "-I$(PERL_LIB)" "-I$(PERL_ARCHLIB)"}
+ $self->{$run} .= q{ "-I$(PERL_LIB)" "-I$(PERL_ARCHLIB)"}
if $self->{UNINSTALLED_PERL} || $self->{PERL_CORE};
$self->{$perl.'RUNINST'} =
return 1;
}
+
+=item init_platform (o)
+
+Add MM_Unix_VERSION.
+
+=item platform_constants (o)
+
+=cut
+
+sub init_platform {
+ my($self) = shift;
+
+ $self->{MM_Unix_VERSION} = $VERSION;
+ $self->{PERL_MALLOC_DEF} = '-DPERL_EXTMALLOC_DEF -Dmalloc=Perl_malloc '.
+ '-Dfree=Perl_mfree -Drealloc=Perl_realloc '.
+ '-Dcalloc=Perl_calloc';
+
+}
+
+sub platform_constants {
+ my($self) = shift;
+ my $make_frag = '';
+
+ foreach my $macro (qw(MM_Unix_VERSION PERL_MALLOC_DEF))
+ {
+ next unless defined $self->{$macro};
+ $make_frag .= "$macro = $self->{$macro}\n";
+ }
+
+ return $make_frag;
+}
+
+
=item init_PERM
$mm->init_PERM
-Called by init_main. Initializes PERL_*
+Called by init_main. Initializes PERL_*
+
+=cut
+
+sub init_PERM {
+ my($self) = shift;
+
+ $self->{PERM_RW} = 644 unless defined $self->{PERM_RW};
+ $self->{PERM_RWX} = 755 unless defined $self->{PERM_RWX};
+
+ return 1;
+}
+
+
+=item init_xs
+
+ $mm->init_xs
+
+Sets up macros having to do with XS code. Currently just INST_STATIC,
+INST_DYNAMIC and INST_BOOT.
=cut
-sub init_PERM {
- my($self) = shift;
-
- $self->{PERM_RW} = 644;
- $self->{PERM_RWX} = 755;
+sub init_xs {
+ my $self = shift;
- return 1;
-}
-
+ if ($self->has_link_code()) {
+ $self->{INST_STATIC} =
+ $self->catfile('$(INST_ARCHAUTODIR)', '$(BASEEXT)$(LIB_EXT)');
+ $self->{INST_DYNAMIC} =
+ $self->catfile('$(INST_ARCHAUTODIR)', '$(DLBASE).$(DLEXT)');
+ $self->{INST_BOOT} =
+ $self->catfile('$(INST_ARCHAUTODIR)', '$(BASEEXT).bs');
+ } else {
+ $self->{INST_STATIC} = '';
+ $self->{INST_DYNAMIC} = '';
+ $self->{INST_BOOT} = '';
+ }
+}
=item install (o)
pure_install :: pure_$(INSTALLDIRS)_install
doc_install :: doc_$(INSTALLDIRS)_install
- }.$self->{NOECHO}.q{echo Appending installation info to $(INSTALLARCHLIB)/perllocal.pod
pure__install : pure_site_install
- @echo INSTALLDIRS not defined, defaulting to INSTALLDIRS=site
+ $(NOECHO) $(ECHO) INSTALLDIRS not defined, defaulting to INSTALLDIRS=site
doc__install : doc_site_install
- @echo INSTALLDIRS not defined, defaulting to INSTALLDIRS=site
+ $(NOECHO) $(ECHO) INSTALLDIRS not defined, defaulting to INSTALLDIRS=site
pure_perl_install ::
- }.$self->{NOECHO}.q{$(MOD_INSTALL) \
- read }.File::Spec->catfile('$(PERL_ARCHLIB)','auto','$(FULLEXT)','.packlist').q{ \
- write }.File::Spec->catfile('$(INSTALLARCHLIB)','auto','$(FULLEXT)','.packlist').q{ \
- $(INST_LIB) $(INSTALLPRIVLIB) \
- $(INST_ARCHLIB) $(INSTALLARCHLIB) \
- $(INST_BIN) $(INSTALLBIN) \
- $(INST_SCRIPT) $(INSTALLSCRIPT) \
- $(INST_MAN1DIR) $(INSTALLMAN1DIR) \
- $(INST_MAN3DIR) $(INSTALLMAN3DIR)
- }.$self->{NOECHO}.q{$(WARN_IF_OLD_PACKLIST) \
- }.File::Spec->catdir('$(SITEARCHEXP)','auto','$(FULLEXT)').q{
+ $(NOECHO) $(MOD_INSTALL) \
+ read }.$self->catfile('$(PERL_ARCHLIB)','auto','$(FULLEXT)','.packlist').q{ \
+ write }.$self->catfile('$(DESTINSTALLARCHLIB)','auto','$(FULLEXT)','.packlist').q{ \
+ $(INST_LIB) $(DESTINSTALLPRIVLIB) \
+ $(INST_ARCHLIB) $(DESTINSTALLARCHLIB) \
+ $(INST_BIN) $(DESTINSTALLBIN) \
+ $(INST_SCRIPT) $(DESTINSTALLSCRIPT) \
+ $(INST_MAN1DIR) $(DESTINSTALLMAN1DIR) \
+ $(INST_MAN3DIR) $(DESTINSTALLMAN3DIR)
+ $(NOECHO) $(WARN_IF_OLD_PACKLIST) \
+ }.$self->catdir('$(SITEARCHEXP)','auto','$(FULLEXT)').q{
pure_site_install ::
- }.$self->{NOECHO}.q{$(MOD_INSTALL) \
- read }.File::Spec->catfile('$(SITEARCHEXP)','auto','$(FULLEXT)','.packlist').q{ \
- write }.File::Spec->catfile('$(INSTALLSITEARCH)','auto','$(FULLEXT)','.packlist').q{ \
- $(INST_LIB) $(INSTALLSITELIB) \
- $(INST_ARCHLIB) $(INSTALLSITEARCH) \
- $(INST_BIN) $(INSTALLSITEBIN) \
- $(INST_SCRIPT) $(INSTALLSCRIPT) \
- $(INST_MAN1DIR) $(INSTALLSITEMAN1DIR) \
- $(INST_MAN3DIR) $(INSTALLSITEMAN3DIR)
- }.$self->{NOECHO}.q{$(WARN_IF_OLD_PACKLIST) \
- }.File::Spec->catdir('$(PERL_ARCHLIB)','auto','$(FULLEXT)').q{
+ $(NOECHO) $(MOD_INSTALL) \
+ read }.$self->catfile('$(SITEARCHEXP)','auto','$(FULLEXT)','.packlist').q{ \
+ write }.$self->catfile('$(DESTINSTALLSITEARCH)','auto','$(FULLEXT)','.packlist').q{ \
+ $(INST_LIB) $(DESTINSTALLSITELIB) \
+ $(INST_ARCHLIB) $(DESTINSTALLSITEARCH) \
+ $(INST_BIN) $(DESTINSTALLSITEBIN) \
+ $(INST_SCRIPT) $(DESTINSTALLSCRIPT) \
+ $(INST_MAN1DIR) $(DESTINSTALLSITEMAN1DIR) \
+ $(INST_MAN3DIR) $(DESTINSTALLSITEMAN3DIR)
+ $(NOECHO) $(WARN_IF_OLD_PACKLIST) \
+ }.$self->catdir('$(PERL_ARCHLIB)','auto','$(FULLEXT)').q{
pure_vendor_install ::
- }.$self->{NOECHO}.q{$(MOD_INSTALL) \
- $(INST_LIB) $(INSTALLVENDORLIB) \
- $(INST_ARCHLIB) $(INSTALLVENDORARCH) \
- $(INST_BIN) $(INSTALLVENDORBIN) \
- $(INST_SCRIPT) $(INSTALLSCRIPT) \
- $(INST_MAN1DIR) $(INSTALLVENDORMAN1DIR) \
- $(INST_MAN3DIR) $(INSTALLVENDORMAN3DIR)
+ $(NOECHO) $(MOD_INSTALL) \
+ read }.$self->catfile('$(VENDORARCHEXP)','auto','$(FULLEXT)','.packlist').q{ \
+ write }.$self->catfile('$(DESTINSTALLVENDORARCH)','auto','$(FULLEXT)','.packlist').q{ \
+ $(INST_LIB) $(DESTINSTALLVENDORLIB) \
+ $(INST_ARCHLIB) $(DESTINSTALLVENDORARCH) \
+ $(INST_BIN) $(DESTINSTALLVENDORBIN) \
+ $(INST_SCRIPT) $(DESTINSTALLSCRIPT) \
+ $(INST_MAN1DIR) $(DESTINSTALLVENDORMAN1DIR) \
+ $(INST_MAN3DIR) $(DESTINSTALLVENDORMAN3DIR)
doc_perl_install ::
- -}.$self->{NOECHO}.q{$(MKPATH) $(INSTALLARCHLIB)
- -}.$self->{NOECHO}.q{$(DOC_INSTALL) \
+ $(NOECHO) $(ECHO) Appending installation info to $(DESTINSTALLARCHLIB)/perllocal.pod
+ -$(NOECHO) $(MKPATH) $(DESTINSTALLARCHLIB)
+ -$(NOECHO) $(DOC_INSTALL) \
"Module" "$(NAME)" \
"installed into" "$(INSTALLPRIVLIB)" \
LINKTYPE "$(LINKTYPE)" \
VERSION "$(VERSION)" \
EXE_FILES "$(EXE_FILES)" \
- >> }.File::Spec->catfile('$(INSTALLARCHLIB)','perllocal.pod').q{
+ >> }.$self->catfile('$(DESTINSTALLARCHLIB)','perllocal.pod').q{
doc_site_install ::
- -}.$self->{NOECHO}.q{$(MKPATH) $(INSTALLARCHLIB)
- -}.$self->{NOECHO}.q{$(DOC_INSTALL) \
+ $(NOECHO) $(ECHO) Appending installation info to $(DESTINSTALLARCHLIB)/perllocal.pod
+ -$(NOECHO) $(MKPATH) $(DESTINSTALLARCHLIB)
+ -$(NOECHO) $(DOC_INSTALL) \
"Module" "$(NAME)" \
"installed into" "$(INSTALLSITELIB)" \
LINKTYPE "$(LINKTYPE)" \
VERSION "$(VERSION)" \
EXE_FILES "$(EXE_FILES)" \
- >> }.File::Spec->catfile('$(INSTALLSITEARCH)','perllocal.pod').q{
+ >> }.$self->catfile('$(DESTINSTALLARCHLIB)','perllocal.pod').q{
doc_vendor_install ::
+ $(NOECHO) $(ECHO) Appending installation info to $(DESTINSTALLARCHLIB)/perllocal.pod
+ -$(NOECHO) $(MKPATH) $(DESTINSTALLARCHLIB)
+ -$(NOECHO) $(DOC_INSTALL) \
+ "Module" "$(NAME)" \
+ "installed into" "$(INSTALLVENDORLIB)" \
+ LINKTYPE "$(LINKTYPE)" \
+ VERSION "$(VERSION)" \
+ EXE_FILES "$(EXE_FILES)" \
+ >> }.$self->catfile('$(DESTINSTALLARCHLIB)','perllocal.pod').q{
};
uninstall :: uninstall_from_$(INSTALLDIRS)dirs
uninstall_from_perldirs ::
- }.$self->{NOECHO}.
- q{$(UNINSTALL) }.File::Spec->catfile('$(PERL_ARCHLIB)','auto','$(FULLEXT)','.packlist').q{
+ $(NOECHO) $(UNINSTALL) }.$self->catfile('$(PERL_ARCHLIB)','auto','$(FULLEXT)','.packlist').q{
uninstall_from_sitedirs ::
- }.$self->{NOECHO}.
- q{$(UNINSTALL) }.File::Spec->catfile('$(SITEARCHEXP)','auto','$(FULLEXT)','.packlist').q{
+ $(NOECHO) $(UNINSTALL) }.$self->catfile('$(SITEARCHEXP)','auto','$(FULLEXT)','.packlist').q{
+
+uninstall_from_vendordirs ::
+ $(NOECHO) $(UNINSTALL) }.$self->catfile('$(VENDORARCHEXP)','auto','$(FULLEXT)','.packlist').q{
};
join("",@m);
return "" unless $self->{EXE_FILES} && ref $self->{EXE_FILES} eq "ARRAY";
return "" unless @{$self->{EXE_FILES}};
my(@m, $from, $to, %fromto, @to);
- push @m, $self->dir_target(qw[$(INST_SCRIPT)]);
for $from (@{$self->{EXE_FILES}}) {
- my($path)= File::Spec->catfile('$(INST_SCRIPT)', basename($from));
+ my($path)= $self->catfile('$(INST_SCRIPT)', basename($from));
local($_) = $path; # for backwards compatibility
$to = $self->libscan($path);
print "libscan($from) => '$to'\n" if ($Verbose >=2);
$fromto{$from}=$to;
}
@to = values %fromto;
+
+ my $fixin;
+ if( $Is_Win32 ) {
+ $fixin = $self->{PERL_CORE} ? '$(PERLRUN) ../../win32/bin/pl2bat.pl'
+ : 'pl2bat.bat';
+ }
+ else {
+ $fixin = q{$(PERLRUN) "-MExtUtils::MY" -e "MY->fixin(shift)"};
+ }
+
push(@m, qq{
EXE_FILES = @{$self->{EXE_FILES}}
-} . (($Is_Win32 || $Is_NetWare)
- ? q{FIXIN = pl2bat.bat
-} : q{FIXIN = $(PERLRUN) "-MExtUtils::MY" \
- -e "MY->fixin(shift)"
-}).qq{
+FIXIN = $fixin
+
pure_all :: @to
- $self->{NOECHO}\$(NOOP)
+ \$(NOECHO) \$(NOOP)
realclean ::
- $self->{RM_F} @to
+ \$(RM_F) @to
});
while (($from,$to) = each %fromto) {
last unless defined $from;
my $todir = dirname($to);
push @m, "
-$to: $from $self->{MAKEFILE} " . File::Spec->catdir($todir,'.exists') . "
- $self->{NOECHO}$self->{RM_F} $to
- $self->{CP} $from $to
+$to : $from \$(FIRST_MAKEFILE) blibdirs
+ \$(NOECHO) \$(RM_F) $to
+ \$(CP) $from $to
\$(FIXIN) $to
- -$self->{NOECHO}\$(CHMOD) \$(PERM_RWX) $to
+ -\$(NOECHO) \$(CHMOD) \$(PERM_RWX) $to
";
}
join "", @m;
}
-=item libscan (o)
-
-Takes a path to a file that is found by init_dirscan and returns false
-if we don't want to include this file in the library. Mainly used to
-exclude RCS, CVS, and SCCS directories from installation.
-
-=cut
-
-# ';
-
-sub libscan {
- my($self,$path) = @_;
- return '' if $path =~ m:\b(RCS|CVS|SCCS)\b: ;
- $path;
-}
=item linkext (o)
$attribs{LINKTYPE} : '$(LINKTYPE)';
"
linkext :: $linktype
- $self->{NOECHO}\$(NOOP)
+ \$(NOECHO) \$(NOOP)
";
}
$(MAKE) -f $(MAKE_APERL_FILE) $@
$(MAKE_APERL_FILE) : $(FIRST_MAKEFILE)
- }.$self->{NOECHO}.q{echo Writing \"$(MAKE_APERL_FILE)\" for this $(MAP_TARGET)
- }.$self->{NOECHO}.q{$(PERLRUNINST) \
+ $(NOECHO) $(ECHO) Writing \"$(MAKE_APERL_FILE)\" for this $(MAP_TARGET)
+ $(NOECHO) $(PERLRUNINST) \
Makefile.PL DIR=}, $dir, q{ \
MAKEFILE=$(MAKE_APERL_FILE) LINKTYPE=static \
MAKEAPERL=1 NORECURS=1 CCCDLFLAGS=};
require File::Find;
File::Find::find(sub {
return unless m/\Q$self->{LIB_EXT}\E$/;
- return if m/^libperl/;
+ return if m/^libperl/ or m/^perl\Q$self->{LIB_EXT}\E$/;
# Skip purified versions of libraries (e.g., DynaLoader_pure_p1_c0_032.a)
return if m/_pure_\w+_\w+_\w+\.\w+$/ and -f "$File::Find::dir/.pure";
if (! -f $libperl and ! -f $lperl) {
# We did not find a static libperl. Maybe there is a shared one?
- if ($^O eq 'solaris' or $^O eq 'sunos') {
+ if ($Is_SunOS) {
$lperl = $libperl = "$dir/$Config{libperl}";
# SUNOS ld does not take the full path to a shared library
- $libperl = '' if $^O eq 'sunos';
+ $libperl = '' if $Is_SunOS4;
}
}
";
push @m, "
-\$(INST_ARCHAUTODIR)/extralibs.all: \$(INST_ARCHAUTODIR)/.exists ".join(" \\\n\t", @$extra)."
- $self->{NOECHO}$self->{RM_F} \$\@
- $self->{NOECHO}\$(TOUCH) \$\@
-";
+\$(INST_ARCHAUTODIR)/extralibs.all: blibdirs ".join(" \\\n\t", @$extra).'
+ $(NOECHO) $(RM_F) $@
+ $(NOECHO) $(TOUCH) $@
+';
my $catfile;
foreach $catfile (@$extra){
push @m, "
\$(MAP_TARGET) :: $tmp/perlmain\$(OBJ_EXT) \$(MAP_LIBPERL) \$(MAP_STATIC) \$(INST_ARCHAUTODIR)/extralibs.all
\$(MAP_LINKCMD) -o \$\@ \$(OPTIMIZE) $tmp/perlmain\$(OBJ_EXT) \$(LDFROM) \$(MAP_STATIC) \$(LLIBPERL) `cat \$(INST_ARCHAUTODIR)/extralibs.all` \$(MAP_PRELIBS)
- $self->{NOECHO}echo 'To install the new \"\$(MAP_TARGET)\" binary, call'
- $self->{NOECHO}echo ' make -f $makefilename inst_perl MAP_TARGET=\$(MAP_TARGET)'
- $self->{NOECHO}echo 'To remove the intermediate files say'
- $self->{NOECHO}echo ' make -f $makefilename map_clean'
+ \$(NOECHO) \$(ECHO) 'To install the new \"\$(MAP_TARGET)\" binary, call'
+ \$(NOECHO) \$(ECHO) ' make -f $makefilename inst_perl MAP_TARGET=\$(MAP_TARGET)'
+ \$(NOECHO) \$(ECHO) 'To remove the intermediate files say'
+ \$(NOECHO) \$(ECHO) ' make -f $makefilename map_clean'
$tmp/perlmain\$(OBJ_EXT): $tmp/perlmain.c
";
push @m, qq{
$tmp/perlmain.c: $makefilename}, q{
- }.$self->{NOECHO}.q{echo Writing $@
- }.$self->{NOECHO}.q{$(PERL) $(MAP_PERLINC) "-MExtUtils::Miniperl" \\
+ $(NOECHO) $(ECHO) Writing $@
+ $(NOECHO) $(PERL) $(MAP_PERLINC) "-MExtUtils::Miniperl" \\
-e "writemain(grep s#.*/auto/##s, split(q| |, q|$(MAP_STATIC)|))" > $@t && $(MV) $@t $@
};
- push @m, "\t",$self->{NOECHO}.q{$(PERL) $(INSTALLSCRIPT)/fixpmain
+ push @m, "\t", q{$(NOECHO) $(PERL) $(INSTALLSCRIPT)/fixpmain
} if (defined (&Dos::UseLFN) && Dos::UseLFN()==0);
push @m, q{
doc_inst_perl:
- }.$self->{NOECHO}.q{echo Appending installation info to $(INSTALLARCHLIB)/perllocal.pod
- -}.$self->{NOECHO}.q{$(MKPATH) $(INSTALLARCHLIB)
- -}.$self->{NOECHO}.q{$(DOC_INSTALL) \
+ $(NOECHO) $(ECHO) Appending installation info to $(DESTINSTALLARCHLIB)/perllocal.pod
+ -$(NOECHO) $(MKPATH) $(DESTINSTALLARCHLIB)
+ -$(NOECHO) $(DOC_INSTALL) \
"Perl binary" "$(MAP_TARGET)" \
MAP_STATIC "$(MAP_STATIC)" \
MAP_EXTRA "`cat $(INST_ARCHAUTODIR)/extralibs.all`" \
MAP_LIBPERL "$(MAP_LIBPERL)" \
- >> }.File::Spec->catfile('$(INSTALLARCHLIB)','perllocal.pod').q{
+ >> }.$self->catfile('$(DESTINSTALLARCHLIB)','perllocal.pod').q{
};
inst_perl: pure_inst_perl doc_inst_perl
pure_inst_perl: $(MAP_TARGET)
- }.$self->{CP}.q{ $(MAP_TARGET) }.File::Spec->catfile('$(INSTALLBIN)','$(MAP_TARGET)').q{
+ }.$self->{CP}.q{ $(MAP_TARGET) }.$self->catfile('$(DESTINSTALLBIN)','$(MAP_TARGET)').q{
clean :: map_clean
' if $self->{OBJECT};
push @m, q{
-# We take a very conservative approach here, but it\'s worth it.
+# We take a very conservative approach here, but it's worth it.
# We move Makefile to Makefile.old here to avoid gnu make looping.
-}.$self->{MAKEFILE}.q{ : Makefile.PL $(CONFIGDEP)
- }.$self->{NOECHO}.q{echo "Makefile out-of-date with respect to $?"
- }.$self->{NOECHO}.q{echo "Cleaning current config before rebuilding Makefile..."
- -}.$self->{NOECHO}.q{$(RM_F) }."$self->{MAKEFILE}.old".q{
- -}.$self->{NOECHO}.q{$(MV) }."$self->{MAKEFILE} $self->{MAKEFILE}.old".q{
- -$(MAKE) -f }.$self->{MAKEFILE}.q{.old clean $(DEV_NULL) || $(NOOP)
+$(FIRST_MAKEFILE) : Makefile.PL $(CONFIGDEP)
+ $(NOECHO) $(ECHO) "Makefile out-of-date with respect to $?"
+ $(NOECHO) $(ECHO) "Cleaning current config before rebuilding Makefile..."
+ -$(NOECHO) $(RM_F) $(MAKEFILE_OLD)
+ -$(NOECHO) $(MV) $(FIRST_MAKEFILE) $(MAKEFILE_OLD)
+ -$(MAKE) -f $(MAKEFILE_OLD) clean $(DEV_NULL) || $(NOOP)
$(PERLRUN) Makefile.PL }.join(" ",map(qq["$_"],@ARGV)).q{
- }.$self->{NOECHO}.q{echo "==> Your Makefile has been rebuilt. <=="
- }.$self->{NOECHO}.q{echo "==> Please rerun the make command. <=="
+ $(NOECHO) $(ECHO) "==> Your Makefile has been rebuilt. <=="
+ $(NOECHO) $(ECHO) "==> Please rerun the make command. <=="
false
};
join "", @m;
}
-=item manifypods (o)
-
-Defines targets and routines to translate the pods into manpages and
-put them into the INST_* directories.
-
-=cut
-
-sub manifypods {
- my($self, %attribs) = @_;
- return "\nmanifypods : pure_all\n\t$self->{NOECHO}\$(NOOP)\n" unless
- %{$self->{MAN3PODS}} or %{$self->{MAN1PODS}};
- my($dist);
- my($pod2man_exe);
- if (defined $self->{PERL_SRC}) {
- $pod2man_exe = File::Spec->catfile($self->{PERL_SRC},'pod','pod2man');
- } else {
- $pod2man_exe = File::Spec->catfile($Config{scriptdirexp},'pod2man');
- }
- unless ($pod2man_exe = $self->perl_script($pod2man_exe)) {
- # Maybe a build by uninstalled Perl?
- $pod2man_exe = File::Spec->catfile($self->{PERL_INC}, "pod", "pod2man");
- }
- unless ($pod2man_exe = $self->perl_script($pod2man_exe)) {
- # No pod2man but some MAN3PODS to be installed
- print <<END;
-
-Warning: I could not locate your pod2man program. Please make sure,
- your pod2man program is in your PATH before you execute 'make'
-
-END
- $pod2man_exe = "-S pod2man";
- }
- my(@m);
- push @m,
-qq[POD2MAN_EXE = $pod2man_exe\n],
-qq[POD2MAN = \$(PERL) -we '%m=\@ARGV;for (keys %m){' \\\n],
-q[-e 'next if -e $$m{$$_} && -M $$m{$$_} < -M $$_ && -M $$m{$$_} < -M "],
- $self->{MAKEFILE}, q[";' \\
--e 'print "Manifying $$m{$$_}\n";' \\
--e 'system(q[$(PERLRUN) $(POD2MAN_EXE) ].qq[$$_>$$m{$$_}])==0 or warn "Couldn\\047t install $$m{$$_}\n";' \\
--e 'chmod(oct($(PERM_RW))), $$m{$$_} or warn "chmod $(PERM_RW) $$m{$$_}: $$!\n";}'
-];
- push @m, "\nmanifypods : pure_all ";
- push @m, join " \\\n\t", keys %{$self->{MAN1PODS}}, keys %{$self->{MAN3PODS}};
-
- push(@m,"\n");
- if (%{$self->{MAN1PODS}} || %{$self->{MAN3PODS}}) {
- push @m, "\t$self->{NOECHO}\$(POD2MAN) \\\n\t";
- push @m, join " \\\n\t", %{$self->{MAN1PODS}}, %{$self->{MAN3PODS}};
- }
- join('', @m);
-}
=item maybe_command
return;
}
-=item maybe_command_in_dirs
-
-method under development. Not yet used. Ask Ilya :-)
-
-=cut
-
-sub maybe_command_in_dirs { # $ver is optional argument if looking for perl
-# Ilya's suggestion. Not yet used, want to understand it first, but at least the code is here
- my($self, $names, $dirs, $trace, $ver) = @_;
- my($name, $dir);
- foreach $dir (@$dirs){
- next unless defined $dir; # $self->{PERL_SRC} may be undefined
- foreach $name (@$names){
- my($abs,$tryabs);
- if (File::Spec->file_name_is_absolute($name)) { # /foo/bar
- $abs = $name;
- } elsif (File::Spec->canonpath($name) eq File::Spec->canonpath(basename($name))) { # bar
- $abs = File::Spec->catfile($dir, $name);
- } else { # foo/bar
- $abs = File::Spec->catfile($Curdir, $name);
- }
- print "Checking $abs for $name\n" if ($trace >= 2);
- next unless $tryabs = $self->maybe_command($abs);
- print "Substituting $tryabs instead of $abs\n"
- if ($trace >= 2 and $tryabs ne $abs);
- $abs = $tryabs;
- if (defined $ver) {
- print "Executing $abs\n" if ($trace >= 2);
- if (`$abs -e 'require $ver; print "VER_OK\n" ' 2>&1` =~ /VER_OK/) {
- print "Using PERL=$abs\n" if $trace;
- return $abs;
- }
- } else { # Do not look for perl
- return $abs;
- }
- }
- }
-}
=item needs_linking (o)
my($self) = shift;
my($child,$caller);
$caller = (caller(0))[3];
- Carp::confess("Needs_linking called too early") if $caller =~ /^ExtUtils::MakeMaker::/;
+ confess("needs_linking called too early") if
+ $caller =~ /^ExtUtils::MakeMaker::/;
return $self->{NEEDS_LINKING} if defined $self->{NEEDS_LINKING};
if ($self->has_link_code or $self->{MAKEAPERL}){
$self->{NEEDS_LINKING} = 1;
my $result;
local *FH;
local $/ = "\n";
+ local $_;
open(FH,$parsefile) or die "Could not open '$parsefile': $!";
my $inpod = 0;
while (<FH>) {
$inpod = /^=(?!cut)/ ? 1 : /^=cut/ ? 0 : $inpod;
next if $inpod || /^\s*#/;
chop;
- # next unless /\$(([\w\:\']*)\bVERSION)\b.*\=/;
- next unless /([\$*])(([\w\:\']*)\bVERSION)\b.*\=/;
+ next unless /(?<!\\)([\$*])(([\w\:\']*)\bVERSION)\b.*\=/;
my $eval = qq{
package ExtUtils::MakeMaker::_version;
no strict;
$_
}; \$$2
};
- no warnings;
+ local $^W = 0;
$result = eval($eval);
warn "Could not eval '$eval' in $parsefile: $@" if $@;
- $result = "undef" unless defined $result;
last;
}
close FH;
+
+ $result = "undef" unless defined $result;
return $result;
}
# We do NOT just update config.h because that is not sufficient.
# An out of date config.h is not fatal but complains loudly!
$(PERL_INC)/config.h: $(PERL_SRC)/config.sh
- -}.$self->{NOECHO}.q{echo "Warning: $(PERL_INC)/config.h out of date with $(PERL_SRC)/config.sh"; false
+ -$(NOECHO) $(ECHO) "Warning: $(PERL_INC)/config.h out of date with $(PERL_SRC)/config.sh"; false
$(PERL_ARCHLIB)/Config.pm: $(PERL_SRC)/config.sh
- }.$self->{NOECHO}.q{echo "Warning: $(PERL_ARCHLIB)/Config.pm may be out of date with $(PERL_SRC)/config.sh"
+ $(NOECHO) $(ECHO) "Warning: $(PERL_ARCHLIB)/Config.pm may be out of date with $(PERL_SRC)/config.sh"
cd $(PERL_SRC) && $(MAKE) lib/Config.pm
} if $self->{PERL_SRC};
$(PERL_INC)/nostdio.h \
$(PERL_INC)/op.h \
$(PERL_INC)/opcode.h \
- $(PERL_INC)/opnames.h \
$(PERL_INC)/patchlevel.h \
$(PERL_INC)/perl.h \
- $(PERL_INC)/perlapi.h \
$(PERL_INC)/perlio.h \
$(PERL_INC)/perlsdio.h \
$(PERL_INC)/perlsfio.h \
$(PERL_INC)/thrdvar.h \
$(PERL_INC)/thread.h \
$(PERL_INC)/unixish.h \
- $(PERL_INC)/utf8.h \
- $(PERL_INC)/util.h \
- $(PERL_INC)/warnings.h
+ $(PERL_INC)/util.h
$(OBJECT) : $(PERL_HDRS)
} if $self->{OBJECT};
=cut
sub perm_rw {
- shift->{PERM_RW} || "644";
+ return shift->{PERM_RW};
}
=item perm_rwx (o)
=cut
sub perm_rwx {
- shift->{PERM_RWX} || "755";
+ return shift->{PERM_RWX};
}
=item pm_to_blib
=cut
-sub _pm_to_blib_flush {
- my ($self, $autodir, $rr, $ra, $rl) = @_;
- $$rr .=
-q{ }.$self->{NOECHO}.q[$(PERLRUNINST) "-MExtUtils::Install" \
- -e "pm_to_blib({qw{].qq[@$ra].q[}},'].$autodir.q{','$(PM_FILTER)')"
-};
- @$ra = ();
- $$rl = 0;
-}
-
sub pm_to_blib {
my $self = shift;
- my($autodir) = File::Spec->catdir('$(INST_LIB)','auto');
+ my($autodir) = $self->catdir('$(INST_LIB)','auto');
my $r = q{
pm_to_blib: $(TO_INST_PM)
};
- my %pm_to_blib = %{$self->{PM}};
- my @a;
- my $l = 0;
- while (my ($pm, $blib) = each %pm_to_blib) {
- my $la = length $pm;
- my $lb = length $blib;
- if ($l + $la + $lb + @a / 2 > 200) { # limit line length
- _pm_to_blib_flush($self, $autodir, \$r, \@a, \$l);
- }
- push @a, $pm, $blib;
- $l += $la + $lb;
- }
- _pm_to_blib_flush($self, $autodir, \$r, \@a, \$l);
- return $r.q{ }.$self->{NOECHO}.q{$(TOUCH) $@};
+
+ my $pm_to_blib = $self->oneliner(<<CODE, ['-MExtUtils::Install']);
+pm_to_blib({\@ARGV}, '$autodir', '\$(PM_FILTER)')
+CODE
+
+ my @cmds = $self->split_command($pm_to_blib, %{$self->{PM}});
+
+ $r .= join '', map { "\t\$(NOECHO) $_\n" } @cmds;
+ $r .= q{ $(NOECHO) $(TOUCH) $@};
+
+ return $r;
}
=item post_constants (o)
=cut
sub post_constants{
- my($self) = shift;
"";
}
=cut
sub post_initialize {
- my($self) = shift;
"";
}
=cut
sub postamble {
- my($self) = shift;
"";
}
if ($self->{ABSTRACT_FROM}){
$self->{ABSTRACT} = $self->parse_abstract($self->{ABSTRACT_FROM}) or
- Carp::carp "WARNING: Setting ABSTRACT via file ".
- "'$self->{ABSTRACT_FROM}' failed\n";
+ carp "WARNING: Setting ABSTRACT via file ".
+ "'$self->{ABSTRACT_FROM}' failed\n";
}
my ($pack_ver) = join ",", (split (/\./, $self->{VERSION}), (0)x4)[0..3];
my $author = $self->{AUTHOR} || '';
$author =~ s/</</g;
$author =~ s/>/>/g;
- $author =~ s/@/\\@/g;
-
- my $make_ppd = sprintf <<'PPD_OUT', $pack_ver, $abstract, $author;
-# Creates a PPD (Perl Package Description) for a binary distribution.
-ppd:
- @$(PERL) -e "print qq{<SOFTPKG NAME=\"$(DISTNAME)\" VERSION=\"%s\">\n\t<TITLE>$(DISTNAME)</TITLE>\n\t<ABSTRACT>%s</ABSTRACT>\n\t<AUTHOR>%s</AUTHOR>\n}" > $(DISTNAME).ppd
-PPD_OUT
+ my $ppd_xml = sprintf <<'PPD_HTML', $pack_ver, $abstract, $author;
+<SOFTPKG NAME="$(DISTNAME)" VERSION="%s">
+ <TITLE>$(DISTNAME)</TITLE>
+ <ABSTRACT>%s</ABSTRACT>
+ <AUTHOR>%s</AUTHOR>
+PPD_HTML
- $make_ppd .= ' @$(PERL) -e "print qq{\t<IMPLEMENTATION>\n';
+ $ppd_xml .= " <IMPLEMENTATION>\n";
foreach my $prereq (sort keys %{$self->{PREREQ_PM}}) {
my $pre_req = $prereq;
$pre_req =~ s/::/-/g;
my ($dep_ver) = join ",", (split (/\./, $self->{PREREQ_PM}{$prereq}),
(0) x 4) [0 .. 3];
- $make_ppd .= sprintf q{\t\t<DEPENDENCY NAME=\"%s\" VERSION=\"%s\" />\n}, $pre_req, $dep_ver;
- }
- $make_ppd .= qq[}" >> \$(DISTNAME).ppd\n];
-
-
- $make_ppd .= sprintf <<'PPD_OUT', $Config{archname};
- @$(PERL) -e "print qq{\t\t<OS NAME=\"$(OSNAME)\" />\n\t\t<ARCHITECTURE NAME=\"%s\" />\n
+ $ppd_xml .= sprintf <<'PPD_OUT', $pre_req, $dep_ver;
+ <DEPENDENCY NAME="%s" VERSION="%s" />
PPD_OUT
- chomp $make_ppd;
+ }
+ $ppd_xml .= sprintf <<'PPD_OUT', $Config{archname};
+ <OS NAME="$(OSNAME)" />
+ <ARCHITECTURE NAME="%s" />
+PPD_OUT
if ($self->{PPM_INSTALL_SCRIPT}) {
if ($self->{PPM_INSTALL_EXEC}) {
- $make_ppd .= sprintf q{\t\t<INSTALL EXEC=\"%s\">%s</INSTALL>\n},
+ $ppd_xml .= sprintf qq{ <INSTALL EXEC="%s">%s</INSTALL>\n},
$self->{PPM_INSTALL_EXEC}, $self->{PPM_INSTALL_SCRIPT};
}
else {
- $make_ppd .= sprintf q{\t\t<INSTALL>%s</INSTALL>\n},
+ $ppd_xml .= sprintf qq{ <INSTALL>%s</INSTALL>\n},
$self->{PPM_INSTALL_SCRIPT};
}
}
my ($bin_location) = $self->{BINARY_LOCATION} || '';
$bin_location =~ s/\\/\\\\/g;
- $make_ppd .= sprintf q{\t\t<CODEBASE HREF=\"%s\" />\n}, $bin_location;
- $make_ppd .= q{\t</IMPLEMENTATION>\n};
- $make_ppd .= q{</SOFTPKG>\n};
+ $ppd_xml .= sprintf <<'PPD_XML', $bin_location;
+ <CODEBASE HREF="%s" />
+ </IMPLEMENTATION>
+</SOFTPKG>
+PPD_XML
- $make_ppd .= '}" >> $(DISTNAME).ppd';
+ my @ppd_cmds = $self->echo($ppd_xml, '$(DISTNAME).ppd');
+
+ return sprintf <<'PPD_OUT', join "\n\t", @ppd_cmds;
+# Creates a PPD (Perl Package Description) for a binary distribution.
+ppd:
+ %s
+PPD_OUT
- return $make_ppd;
}
=item prefixify
$MM->prefixify($var, $prefix, $new_prefix, $default);
Using either $MM->{uc $var} || $Config{lc $var}, it will attempt to
-replace it's $prefix with a $new_prefix. Should the $prefix fail to
-match it sill simply set it to the $new_prefix + $default.
+replace it's $prefix with a $new_prefix.
+
+Should the $prefix fail to match I<AND> a PREFIX was given as an
+argument to WriteMakefile() it will set it to the $new_prefix +
+$default. This is for systems whose file layouts don't neatly fit into
+our ideas of prefixes.
This is for heuristics which attempt to create directory structures
that mirror those of the installed perl.
my($self,$var,$sprefix,$rprefix,$default) = @_;
my $path = $self->{uc $var} ||
- $Config_Override{lc $var} || $Config{lc $var};
+ $Config_Override{lc $var} || $Config{lc $var} || '';
- print STDERR " prefixify $var=$path\n" if $Verbose >= 2;
- print STDERR " from $sprefix to $rprefix\n"
- if $Verbose >= 2;
+ $rprefix .= '/' if $sprefix =~ m|/$|;
- $path = VMS::Filespec::unixpath($path) if $Is_VMS;
+ print STDERR " prefixify $var => $path\n" if $Verbose >= 2;
+ print STDERR " from $sprefix to $rprefix\n" if $Verbose >= 2;
- unless( $path =~ s,^\Q$sprefix\E(?=/|\z),$rprefix,s ) {
+ if( $self->{ARGS}{PREFIX} && $self->file_name_is_absolute($path) &&
+ $path !~ s{^\Q$sprefix\E\b}{$rprefix}s )
+ {
print STDERR " cannot prefix, using default.\n" if $Verbose >= 2;
print STDERR " no default!\n" if !$default && $Verbose >= 2;
- $path = File::Spec->catdir($rprefix, $default) if $default;
+ $path = $self->catdir($rprefix, $default) if $default;
}
print " now $path\n" if $Verbose >= 2;
foreach $target (@$list) {
push @m, "
all :: $target
- $self->{NOECHO}\$(NOOP)
+ \$(NOECHO) \$(NOOP)
$target :: $plfile
\$(PERLRUNINST) $plfile $target
=cut
sub quote_paren {
- local $_ = shift;
- s/\$\((.+?)\)/\$\\\\($1\\\\)/g; # protect $(...)
- s/(?<!\\)([()])/\\$1/g; # quote unprotected
- s/\$\\\\\((.+?)\\\\\)/\$($1)/g; # unprotect $(...)
- return $_;
+ my $arg = shift;
+ $arg =~ s/\$\((.+?)\)/\$\\\\($1\\\\)/g; # protect $(...)
+ $arg =~ s/(?<!\\)([()])/\\$1/g; # quote unprotected
+ $arg =~ s/\$\\\\\((.+?)\\\\\)/\$($1)/g; # unprotect $(...)
+ return $arg;
}
=item realclean (o)
push(@m,'
# Delete temporary files (via clean) and also delete installed files
-realclean purge :: clean
+realclean purge :: clean realclean_subdirs
+ $(RM_RF) $(INST_AUTODIR) $(INST_ARCHAUTODIR)
+ $(RM_RF) $(DISTVNAME)
');
- # realclean subdirectories first (already cleaned)
- my $sub;
- if( $Is_Win32 && Win32::IsWin95() ) {
- $sub = <<'REALCLEAN';
- -cd %s
- -$(PERLRUN) -e "exit unless -f shift; system q{$(MAKE) realclean}" %s
- -cd ..
-REALCLEAN
- }
- else {
- $sub = <<'REALCLEAN';
- -cd %s && $(TEST_F) %s && $(MAKE) %s realclean
-REALCLEAN
- }
- foreach(@{$self->{DIR}}){
- push(@m, sprintf($sub,$_,"$self->{MAKEFILE}.old","-f $self->{MAKEFILE}.old"));
- push(@m, sprintf($sub,$_,"$self->{MAKEFILE}",''));
- }
- push(@m, " $self->{RM_RF} \$(INST_AUTODIR) \$(INST_ARCHAUTODIR)\n");
- push(@m, " $self->{RM_RF} \$(DISTVNAME)\n");
if( $self->has_link_code ){
- push(@m, " $self->{RM_F} \$(INST_DYNAMIC) \$(INST_BOOT)\n");
- push(@m, " $self->{RM_F} \$(INST_STATIC)\n");
+ push(@m, " \$(RM_F) \$(INST_DYNAMIC) \$(INST_BOOT)\n");
+ push(@m, " \$(RM_F) \$(INST_STATIC)\n");
}
+
+ my @files = values %{$self->{PM}};
+ push @files, $attribs{FILES} if $attribs{FILES};
+ push @files, '$(FIRST_MAKEFILE)', '$(MAKEFILE_OLD)';
+
+ # Occasionally files are repeated several times from different sources
+ { my(%f) = map { ($_,1) } @files; @files = keys %f; }
+
# Issue a several little RM_F commands rather than risk creating a
# very long command line (useful for extensions such as Encode
# that have many files).
- if (keys %{$self->{PM}}) {
- my $line = "";
- foreach (values %{$self->{PM}}) {
- if (length($line) + length($_) > 80) {
- push @m, "\t$self->{RM_F} $line\n";
- $line = $_;
- }
- else {
- $line .= " $_";
- }
- }
- push @m, "\t$self->{RM_F} $line\n" if $line;
+ my $line = "";
+ foreach my $file (@files) {
+ if (length($line) + length($file) > 200) {
+ push @m, "\t\$(RM_F) $line\n";
+ $line = $file;
+ }
+ else {
+ $line .= " $file";
+ }
}
- my(@otherfiles) = ($self->{MAKEFILE},
- "$self->{MAKEFILE}.old"); # Makefiles last
- push(@otherfiles, $attribs{FILES}) if $attribs{FILES};
- push(@m, " $self->{RM_RF} @otherfiles\n") if @otherfiles;
- push(@m, " $attribs{POSTOP}\n") if $attribs{POSTOP};
+ push @m, "\t\$(RM_F) $line\n" if $line;
+ push(@m, "\t$attribs{POSTOP}\n") if $attribs{POSTOP};
+
join("", @m);
}
+
+=item realclean_subdirs_target
+
+ my $make_frag = $MM->realclean_subdirs_target;
+
+Returns the realclean_subdirs target. This is used by the realclean
+target to call realclean on any subdirectories which contain Makefiles.
+
+=cut
+
+sub realclean_subdirs_target {
+ my $self = shift;
+
+ return <<'NOOP_FRAG' unless @{$self->{DIR}};
+realclean_subdirs :
+ $(NOECHO) $(NOOP)
+NOOP_FRAG
+
+ my $rclean = "realclean_subdirs :\n";
+
+ foreach my $dir (@{$self->{DIR}}){
+ $rclean .= sprintf <<'RCLEAN', $dir, $dir;
+ -cd %s && $(TEST_F) $(MAKEFILE_OLD) && $(MAKE) -f $(MAKEFILE_OLD) realclean
+ -cd %s && $(TEST_F) $(FIRST_MAKEFILE) && $(MAKE) realclean
+RCLEAN
+
+ }
+
+ return $rclean;
+}
+
+
=item replace_manpage_separator
my $man_name = $MM->replace_manpage_separator($file_path);
return $man;
}
+
+=item oneliner (o)
+
+=cut
+
+sub oneliner {
+ my($self, $cmd, $switches) = @_;
+ $switches = [] unless defined $switches;
+
+ # Strip leading and trailing newlines
+ $cmd =~ s{^\n+}{};
+ $cmd =~ s{\n+$}{};
+
+ my @cmds = split /\n/, $cmd;
+ $cmd = join " \n\t-e ", map $self->quote_literal($_), @cmds;
+ $cmd = $self->escape_newlines($cmd);
+
+ $switches = join ' ', @$switches;
+
+ return qq{\$(PERLRUN) $switches -e $cmd};
+}
+
+
+=item quote_literal
+
+=cut
+
+sub quote_literal {
+ my($self, $text) = @_;
+
+ # I think all we have to quote is single quotes and I think
+ # this is a safe way to do it.
+ $text =~ s{'}{'\\''}g;
+
+ return "'$text'";
+}
+
+
+=item escape_newlines
+
+=cut
+
+sub escape_newlines {
+ my($self, $text) = @_;
+
+ $text =~ s{\n}{\\\n}g;
+
+ return $text;
+}
+
+
+=item max_exec_len
+
+Using POSIX::ARG_MAX. Otherwise falling back to 4096.
+
+=cut
+
+sub max_exec_len {
+ my $self = shift;
+
+ if (!defined $self->{_MAX_EXEC_LEN}) {
+ if (my $arg_max = eval { require POSIX; &POSIX::ARG_MAX }) {
+ $self->{_MAX_EXEC_LEN} = $arg_max;
+ }
+ else { # POSIX minimum exec size
+ $self->{_MAX_EXEC_LEN} = 4096;
+ }
+ }
+
+ return $self->{_MAX_EXEC_LEN};
+}
+
+
=item static (o)
Defines the static target.
'
## $(INST_PM) has been moved to the all: target.
## It remains here for awhile to allow for old usage: "make static"
-#static :: '.$self->{MAKEFILE}.' $(INST_STATIC) $(INST_PM)
-static :: '.$self->{MAKEFILE}.' $(INST_STATIC)
- '.$self->{NOECHO}.'$(NOOP)
+static :: $(FIRST_MAKEFILE) $(INST_STATIC)
+ $(NOECHO) $(NOOP)
';
}
sub static_lib {
my($self) = @_;
-# Come to think of it, if there are subdirs with linkcode, we still have no INST_STATIC
-# return '' unless $self->needs_linking(); #might be because of a subdir
-
return '' unless $self->has_link_code;
my(@m);
push(@m, <<'END');
-$(INST_STATIC): $(OBJECT) $(MYEXTLIB) $(INST_ARCHAUTODIR)/.exists
+
+$(INST_STATIC): $(OBJECT) $(MYEXTLIB) blibdirs
$(RM_RF) $@
END
+
# If this extension has its own library (eg SDBM_File)
# then copy that to $(INST_STATIC) and add $(OBJECT) into it.
- push(@m, "\t$self->{CP} \$(MYEXTLIB) \$\@\n") if $self->{MYEXTLIB};
+ push(@m, <<'MAKE_FRAG') if $self->{MYEXTLIB};
+ $(CP) $(MYEXTLIB) $@
+MAKE_FRAG
my $ar;
if (exists $self->{FULL_AR} && -x $self->{FULL_AR}) {
} else {
$ar = 'AR';
}
- push @m,
- "\t\$($ar) ".'$(AR_STATIC_ARGS) $@ $(OBJECT) && $(RANLIB) $@'."\n";
- push @m,
-q{ $(CHMOD) $(PERM_RWX) $@
- }.$self->{NOECHO}.q{echo "$(EXTRALIBS)" > $(INST_ARCHAUTODIR)/extralibs.ld
-};
+ push @m, sprintf <<'MAKE_FRAG', $ar;
+ $(%s) $(AR_STATIC_ARGS) $@ $(OBJECT) && $(RANLIB) $@
+ $(CHMOD) $(PERM_RWX) $@
+ $(NOECHO) $(ECHO) "$(EXTRALIBS)" > $(INST_ARCHAUTODIR)/extralibs.ld
+MAKE_FRAG
+
# Old mechanism - still available:
- push @m,
-"\t$self->{NOECHO}".q{echo "$(EXTRALIBS)" >> $(PERL_SRC)/ext.libs
-} if $self->{PERL_SRC} && $self->{EXTRALIBS};
- push @m, "\n";
+ push @m, <<'MAKE_FRAG' if $self->{PERL_SRC} && $self->{EXTRALIBS};
+ $(NOECHO) $(ECHO) "$(EXTRALIBS)" >> $(PERL_SRC)/ext.libs
+MAKE_FRAG
- push @m, $self->dir_target('$(INST_ARCHAUTODIR)');
- join('', "\n",@m);
+ join('', @m);
}
=item staticmake (o)
# And as it's not yet built, we add the current extension
# but only if it has some C code (or XS code, which implies C code)
if (@{$self->{C}}) {
- @static = File::Spec->catfile($self->{INST_ARCHLIB},
+ @static = $self->catfile($self->{INST_ARCHLIB},
"auto",
$self->{FULLEXT},
"$self->{BASEEXT}$self->{LIB_EXT}"
sub subdir_x {
my($self, $subdir) = @_;
- my(@m);
- if ($Is_Win32 && Win32::IsWin95()) {
- if ($Config{'make'} =~ /dmake/i) {
- # dmake-specific
- return <<EOT;
-subdirs ::
-@[
- cd $subdir
- \$(MAKE) -f \$(FIRST_MAKEFILE) all \$(PASTHRU)
- cd ..
-]
-EOT
- } elsif ($Config{'make'} =~ /nmake/i) {
- # nmake-specific
- return <<EOT;
-subdirs ::
- cd $subdir
- \$(MAKE) -f \$(FIRST_MAKEFILE) all \$(PASTHRU)
- cd ..
-EOT
- }
- } else {
- return <<EOT;
+ return sprintf <<'EOT', $subdir;
subdirs ::
- $self->{NOECHO}cd $subdir && \$(MAKE) -f \$(FIRST_MAKEFILE) all \$(PASTHRU)
+ $(NOECHO)cd %s && $(MAKE) -f $(FIRST_MAKEFILE) all $(PASTHRU)
EOT
- }
}
=item subdirs (o)
my($self, %attribs) = @_;
my $tests = $attribs{TESTS} || '';
if (!$tests && -d 't') {
- $tests = $Is_Win32 ? join(' ', <t\\*.t>) : 't/*.t';
+ $tests = $self->find_tests;
}
# note: 'test.pl' name is also hardcoded in init_dirscan()
my(@m);
test :: \$(TEST_TYPE)
");
- if ($Is_Win32 && Win32::IsWin95()) {
- push(@m, map(qq{\t$self->{NOECHO}\$(PERLRUN) -e "exit unless -f shift; chdir '$_'; system q{\$(MAKE) test \$(PASTHRU)}" $self->{MAKEFILE}\n}, @{$self->{DIR}}));
+ if ($Is_Win95) {
+ push(@m, map(qq{\t\$(NOECHO) \$(PERLRUN) -e "exit unless -f shift; chdir '$_'; system q[\$(MAKE) test \$(PASTHRU)]" \$(FIRST_MAKEFILE)\n}, @{$self->{DIR}}));
}
else {
- push(@m, map("\t$self->{NOECHO}cd $_ && \$(TEST_F) $self->{MAKEFILE} && \$(MAKE) test \$(PASTHRU)\n", @{$self->{DIR}}));
+ push(@m, map("\t\$(NOECHO) cd $_ && \$(TEST_F) \$(FIRST_MAKEFILE) && \$(MAKE) test \$(PASTHRU)\n", @{$self->{DIR}}));
}
- push(@m, "\t$self->{NOECHO}echo 'No tests defined for \$(NAME) extension.'\n")
+ push(@m, "\t\$(NOECHO) \$(ECHO) 'No tests defined for \$(NAME) extension.'\n")
unless $tests or -f "test.pl" or @{$self->{DIR}};
push(@m, "\n");
return $self->SUPER::test_via_script("PERL_DL_NONLAZY=1 $perl", $script);
}
-=item tool_autosplit (o)
-
-Defines a simple perl call that runs autosplit. May be deprecated by
-pm_to_blib soon.
-
-=cut
-
-sub tool_autosplit {
- my($self, %attribs) = @_;
- my($asl) = "";
- $asl = "\$\$AutoSplit::Maxlen=$attribs{MAXLEN};" if $attribs{MAXLEN};
- return sprintf <<'MAKE_FRAG', $asl;
-# Usage: $(AUTOSPLITFILE) FileToSplit AutoDirToSplitInto
-AUTOSPLITFILE = $(PERLRUN) -e 'use AutoSplit; %s autosplit($$ARGV[0], $$ARGV[1], 0, 1, 1) ;'
+=item tools_other (o)
-MAKE_FRAG
+ my $make_frag = $MM->tools_other;
-}
+Returns a make fragment containing definitions for:
-=item tools_other (o)
+SHELL, CHMOD, CP, MV, NOOP, NOECHO, RM_F, RM_RF, TEST_F, TOUCH,
+DEV_NULL, UMASK_NULL, MKPATH, EQUALIZE_TIMESTAMP,
+WARN_IF_OLD_PACKLIST, UNINST, VERBINST, MOD_INSTALL, DOC_INSTALL and
+UNINSTALL
-Defines SHELL, LD, TOUCH, CP, MV, RM_F, RM_RF, CHMOD, UMASK_NULL in
-the Makefile. Also defines the perl programs MKPATH,
-WARN_IF_OLD_PACKLIST, MOD_INSTALL. DOC_INSTALL, and UNINSTALL.
+init_others() initializes all these values.
=cut
sub tools_other {
my($self) = shift;
my @m;
- my $bin_sh = $Config{sh} || '/bin/sh';
- push @m, qq{
-SHELL = $bin_sh
-};
- for (qw/ CHMOD CP LD MV NOOP RM_F RM_RF TEST_F TOUCH UMASK_NULL DEV_NULL/ ) {
- push @m, "$_ = $self->{$_}\n";
+ for my $tool (qw{ SHELL CHMOD CP MV NOOP NOECHO RM_F RM_RF TEST_F TOUCH
+ UMASK_NULL DEV_NULL MKPATH EQUALIZE_TIMESTAMP
+ ECHO ECHO_N
+ UNINST VERBINST
+ MOD_INSTALL DOC_INSTALL UNINSTALL
+ WARN_IF_OLD_PACKLIST
+ } )
+ {
+ next unless defined $self->{$tool};
+ push @m, "$tool = $self->{$tool}\n";
}
- push @m, q{
-# The following is a portable way to say mkdir -p
-# To see which directories are created, change the if 0 to if 1
-MKPATH = $(PERLRUN) "-MExtUtils::Command" -e mkpath
-
-# This helps us to minimize the effect of the .exists files A yet
-# better solution would be to have a stable file in the perl
-# distribution with a timestamp of zero. But this solution doesn't
-# need any changes to the core distribution and works with older perls
-EQUALIZE_TIMESTAMP = $(PERLRUN) "-MExtUtils::Command" -e eqtime
-};
-
-
- return join "", @m if $self->{PARENT};
-
- push @m, q{
-# Here we warn users that an old packlist file was found somewhere,
-# and that they should call some uninstall routine
-WARN_IF_OLD_PACKLIST = $(PERL) -we 'exit unless -f $$ARGV[0];' \\
--e 'print "WARNING: I have found an old package in\n";' \\
--e 'print "\t$$ARGV[0].\n";' \\
--e 'print "Please make sure the two installations are not conflicting\n";'
-
-UNINST=0
-VERBINST=0
-
-MOD_INSTALL = $(PERL) "-I$(INST_LIB)" "-I$(PERL_LIB)" "-MExtUtils::Install" \
--e "install({@ARGV},'$(VERBINST)',0,'$(UNINST)');"
-
-DOC_INSTALL = $(PERL) -e '$$\="\n\n";' \
--e 'print "=head2 ", scalar(localtime), ": C<", shift, ">", " L<", $$arg=shift, "|", $$arg, ">";' \
--e 'print "=over 4";' \
--e 'while (defined($$key = shift) and defined($$val = shift)){print "=item *";print "C<$$key: $$val>";}' \
--e 'print "=back";'
-
-UNINSTALL = $(PERLRUN) "-MExtUtils::Install" \
--e 'uninstall($$ARGV[0],1,1); print "\nUninstall is deprecated. Please check the";' \
--e 'print " packlist above carefully.\n There may be errors. Remove the";' \
--e 'print " appropriate files manually.\n Sorry for the inconveniences.\n"'
-};
-
return join "", @m;
}
sub tool_xsubpp {
my($self) = shift;
return "" unless $self->needs_linking;
- my($xsdir) = File::Spec->catdir($self->{PERL_LIB},"ExtUtils");
- my(@tmdeps) = File::Spec->catdir('$(XSUBPPDIR)','typemap');
+
+ my $xsdir;
+ foreach my $dir (@INC) {
+ $xsdir = $self->catdir($dir, 'ExtUtils');
+ if( -r $self->catfile($xsdir, "xsubpp") ) {
+ last;
+ }
+ }
+
+ my $tmdir = File::Spec->catdir($self->{PERL_LIB},"ExtUtils");
+ my(@tmdeps) = $self->catfile($tmdir,'typemap');
if( $self->{TYPEMAPS} ){
my $typemap;
foreach $typemap (@{$self->{TYPEMAPS}}){
}
- my $xsubpp_version = $self->xsubpp_version(File::Spec->catfile($xsdir,"xsubpp"));
-
- # What are the correct thresholds for version 1 && 2 Paul?
- if ( $xsubpp_version > 1.923 ){
- $self->{XSPROTOARG} = "" unless defined $self->{XSPROTOARG};
- } else {
- if (defined $self->{XSPROTOARG} && $self->{XSPROTOARG} =~ /\-prototypes/) {
- print STDOUT qq{Warning: This extension wants to pass the switch "-prototypes" to xsubpp.
- Your version of xsubpp is $xsubpp_version and cannot handle this.
- Please upgrade to a more recent version of xsubpp.
-};
- } else {
- $self->{XSPROTOARG} = "";
- }
- }
-
- my $xsubpp = "xsubpp";
+ $self->{XSPROTOARG} = "" unless defined $self->{XSPROTOARG};
return qq{
XSUBPPDIR = $xsdir
-XSUBPP = \$(XSUBPPDIR)/$xsubpp
+XSUBPP = \$(XSUBPPDIR)/xsubpp
XSPROTOARG = $self->{XSPROTOARG}
XSUBPPDEPS = @tmdeps \$(XSUBPP)
XSUBPPARGS = @tmargs
};
};
-sub xsubpp_version
-{
- my($self,$xsubpp) = @_;
- return $Xsubpp_Version if defined $Xsubpp_Version; # global variable
-
- my ($version) ;
-
- # try to figure out the version number of the xsubpp on the system
-
- # first try the -v flag, introduced in 1.921 & 2.000a2
-
- return "" unless $self->needs_linking;
-
- my $command = qq{$self->{PERL} "-I$self->{PERL_LIB}" $xsubpp -v 2>&1};
- print "Running $command\n" if $Verbose >= 2;
- $version = `$command` ;
- warn "Running '$command' exits with status " . ($?>>8) if $?;
- chop $version ;
-
- return $Xsubpp_Version = $1 if $version =~ /^xsubpp version (.*)/ ;
-
- # nope, then try something else
-
- my $counter = '000';
- my ($file) = 'temp' ;
- $counter++ while -e "$file$counter"; # don't overwrite anything
- $file .= $counter;
- open(F, ">$file") or die "Cannot open file '$file': $!\n" ;
- print F <<EOM ;
-MODULE = fred PACKAGE = fred
+=item all_target
-int
-fred(a)
- int a;
-EOM
+Build man pages, too
- close F ;
-
- $command = "$self->{PERL} $xsubpp $file 2>&1";
- print "Running $command\n" if $Verbose >= 2;
- my $text = `$command` ;
- warn "Running '$command' exits with status " . ($?>>8) if $?;
- unlink $file ;
-
- # gets 1.2 -> 1.92 and 2.000a1
- return $Xsubpp_Version = $1 if $text =~ /automatically by xsubpp version ([\S]+)\s*/ ;
+=cut
- # it is either 1.0 or 1.1
- return $Xsubpp_Version = 1.1 if $text =~ /^Warning: ignored semicolon/ ;
+sub all_target {
+ my $self = shift;
- # none of the above, so 1.0
- return $Xsubpp_Version = "1.0" ;
+ return <<'MAKE_EXT';
+all :: pure_all manifypods
+ $(NOECHO) $(NOOP)
+MAKE_EXT
}
=item top_targets (o)
my($self) = shift;
my(@m);
- push @m, '
-all :: pure_all manifypods
- '.$self->{NOECHO}.'$(NOOP)
-'
- unless $self->{SKIPHASH}{'all'};
-
+ push @m, $self->all_target, "\n" unless $self->{SKIPHASH}{'all'};
+
push @m, '
pure_all :: config pm_to_blib subdirs linkext
- '.$self->{NOECHO}.'$(NOOP)
+ $(NOECHO) $(NOOP)
subdirs :: $(MYEXTLIB)
- '.$self->{NOECHO}.'$(NOOP)
-
-config :: '.$self->{MAKEFILE}.' $(INST_LIBDIR)/.exists
- '.$self->{NOECHO}.'$(NOOP)
-
-config :: $(INST_ARCHAUTODIR)/.exists
- '.$self->{NOECHO}.'$(NOOP)
+ $(NOECHO) $(NOOP)
-config :: $(INST_AUTODIR)/.exists
- '.$self->{NOECHO}.'$(NOOP)
+config :: $(FIRST_MAKEFILE) blibdirs
+ $(NOECHO) $(NOOP)
';
- push @m, $self->dir_target(qw[$(INST_AUTODIR) $(INST_LIBDIR) $(INST_ARCHAUTODIR)]);
-
- if (%{$self->{MAN1PODS}}) {
- push @m, qq[
-config :: \$(INST_MAN1DIR)/.exists
- $self->{NOECHO}\$(NOOP)
-
-];
- push @m, $self->dir_target(qw[$(INST_MAN1DIR)]);
- }
- if (%{$self->{MAN3PODS}}) {
- push @m, qq[
-config :: \$(INST_MAN3DIR)/.exists
- $self->{NOECHO}\$(NOOP)
-
-];
- push @m, $self->dir_target(qw[$(INST_MAN3DIR)]);
- }
-
push @m, '
$(O_FILES): $(H_FILES)
' if @{$self->{O_FILES} || []} && @{$self->{H} || []};
push @m, q{
-help:
+help :
perldoc ExtUtils::MakeMaker
};
';
}
-=item perl_archive
-
-This is internal method that returns path to libperl.a equivalent
-to be linked to dynamic extensions. UNIX does not have one but other
-OSs might have one.
-
-=cut
-
-sub perl_archive
-{
- return "";
-}
-
-=item perl_archive_after
-
-This is an internal method that returns path to a library which
-should be put on the linker command line I<after> the external libraries
-to be linked to dynamic extensions. This may be needed if the linker
-is one-pass, and Perl includes some overrides for C RTL functions,
-such as malloc().
-
-=cut
-
-sub perl_archive_after
-{
- return "";
-}
-
-=item export_list
-
-This is internal method that returns name of a file that is
-passed to linker to define symbols to be exported.
-UNIX does not have one but OS2 and Win32 do.
-
-=cut
-
-sub export_list
-{
- return "";
-}
-
1;