For more information on generating complex queries, see
L<SQL::Abstract/WHERE CLAUSES>.
+=head2 Retrieve one and only one row from a resultset
+
+Sometimes you need only the first "top" row of a resultset. While this can be
+easily done with L<< $rs->first|DBIx::Class::ResultSet/first >>, it is suboptimal,
+as a full blown cursor for the resultset will be created and then immediately
+destroyed after fetching the first row object.
+L<< $rs->single|DBIx::Class::ResultSet/single >> is
+designed specifically for this case - it will grab the first returned result
+without even instantiating a cursor.
+
+Before replacing all your calls to C<first()> with C<single()> please observe the
+following CAVEATS:
+
+=over
+
+=item *
+While single() takes a search condition just like search() does, it does
+_not_ accept search attributes. However one can always chain a single() to
+a search():
+
+ my $top_cd = $cd_rs -> search({}, { order_by => 'rating' }) -> single;
+
+
+=item *
+Since single() is the engine behind find(), it is designed to fetch a
+single row per database query. Thus a warning will be issued when the
+underlying SELECT returns more than one row. Sometimes however this usage
+is valid: i.e. we have an arbitrary number of cd's but only one of them is
+at the top of the charts at any given time. If you know what you are doing,
+you can silence the warning by explicitly limiting the resultset size:
+
+ my $top_cd = $cd_rs -> search ({}, { order_by => 'rating', rows => 1 }) -> single;
+
+=back
+
=head2 Arbitrary SQL through a custom ResultSource
Sometimes you have to run arbitrary SQL because your query is too complex
SQL
# Finally, register your new ResultSource with your Schema
- My::Schema->register_source( 'UserFriendsComplex' => $new_source );
+ My::Schema->register_extra_source( 'UserFriendsComplex' => $new_source );
Next, you can execute your complex query using bind parameters like this:
}
) ];
-... and you'll get back a perfect L<DBIx::Class::ResultSet>.
+... and you'll get back a perfect L<DBIx::Class::ResultSet> (except, of course,
+that you cannot modify the rows it contains, ie. cannot call L</update>,
+L</delete>, ... on it).
+
+If you prefer to have the definitions of these custom ResultSources in separate
+files (instead of stuffing all of them into the same resultset class), you can
+achieve the same with subclassing the resultset class and defining the
+ResultSource there:
+
+ package My::Schema::UserFriendsComplex;
+
+ use My::Schema::User;
+ use base qw/My::Schema::User/;
+
+ __PACKAGE__->table('dummy'); # currently must be called before anything else
+
+ # Hand in your query as a scalar reference
+ # It will be added as a sub-select after FROM,
+ # so pay attention to the surrounding brackets!
+ __PACKAGE__->name( \<<SQL );
+ ( SELECT u.* FROM user u
+ INNER JOIN user_friends f ON u.id = f.user_id
+ WHERE f.friend_user_id = ?
+ UNION
+ SELECT u.* FROM user u
+ INNER JOIN user_friends f ON u.id = f.friend_user_id
+ WHERE f.user_id = ? )
+ SQL
+
+TIMTOWDI.
=head2 Using specific columns
are in any way unsure about the use of the attributes above (C< join
>, C< select >, C< as > and C< group_by >).
+=head2 Subqueries
+
+You can write subqueries relatively easily in DBIC.
+
+ my $inside_rs = $schema->resultset('Artist')->search({
+ name => [ 'Billy Joel', 'Brittany Spears' ],
+ });
+
+ my $rs = $schema->resultset('CD')->search({
+ artist_id => { 'IN' => $inside_rs->get_column('id')->as_query },
+ });
+
+The usual operators ( =, !=, IN, NOT IN, etc) are supported.
+
+B<NOTE>: You have to explicitly use '=' when doing an equality comparison.
+The following will B<not> work:
+
+ my $rs = $schema->resultset('CD')->search({
+ artist_id => $inside_rs->get_column('id')->as_query,
+ });
+
+=head3 Support
+
+Subqueries are supported in the where clause (first hashref), and in the
+from, select, and +select attributes.
+
+=head3 Correlated subqueries
+
+ my $cdrs = $schema->resultset('CD');
+ my $rs = $cdrs->search({
+ year => {
+ '=' => $cdrs->search(
+ { artistid => { '=' => \'me.artistid' } },
+ { alias => 'inner' }
+ )->get_column('year')->max_rs->as_query,
+ },
+ });
+
+That creates the following SQL:
+
+ SELECT me.cdid, me.artist, me.title, me.year, me.genreid, me.single_track
+ FROM cd me
+ WHERE year = (
+ SELECT MAX(inner.year)
+ FROM cd inner
+ WHERE artistid = me.artistid
+ )
+
=head2 Predefined searches
You can write your own L<DBIx::Class::ResultSet> class by inheriting from it
my $hash_ref = $rs->find(1);
Wasn't that easy?
-
+
=head2 Get raw data for blindingly fast results
If the L<HashRefInflator|DBIx::Class::ResultClass::HashRefInflator> solution
exactly as they come out of the data base with none of the convenience methods
wrapped round them.
-This is used like so:-
+This is used like so:
my $cursor = $rs->cursor
while (my @vals = $cursor->next) {
__PACKAGE__->has_many('pages' => 'Page', 'book', { order_by => \'page_number DESC'} );
+=head2 Filtering a relationship result set
+
+If you want to get a filtered result set, you can just add add to $attr as follows:
+
+ __PACKAGE__->has_many('pages' => 'Page', 'book', { where => { scrap => 0 } } );
+
=head2 Many-to-many relationships
This is straightforward using L<ManyToMany|DBIx::Class::Relationship/many_to_many>:
Often you will want indexes on columns on your table to speed up searching. To
do this, create a method called C<sqlt_deploy_hook> in the relevant source
-class:
+class (refer to the advanced
+L<callback system|DBIx::Class::ResultSource/sqlt_deploy_callback> if you wish
+to share a hook between multiple sources):
package My::Schema::Artist;
$sqlt_schema->drop_table('table_name');
}
-You could also add views or procedures to the output using
-L<SQL::Translator::Schema/add_view> or
-L<SQL::Translator::Schema/add_procedure>.
+You could also add views, procedures or triggers to the output using
+L<SQL::Translator::Schema/add_view>,
+L<SQL::Translator::Schema/add_procedure> or
+L<SQL::Translator::Schema/add_trigger>.
+
=head2 Schema versioning
generator to put the quotes the correct place.
In most cases you should set these as part of the arguments passed to
-L<DBIx::Class::Schema/conect>:
+L<DBIx::Class::Schema/connect>:
my $schema = My::Schema->connect(
'dbi:mysql:my_db',
The limit dialect can also be set at connect time by specifying a
C<limit_dialect> key in the final hash as shown above.
+=head2 Working with PostgreSQL array types
+
+You can also assign values to PostgreSQL array columns by passing array
+references in the C<\%columns> (C<\%vals>) hashref of the
+L<DBIx::Class::ResultSet/create> and L<DBIx::Class::Row/update> family of
+methods:
+
+ $resultset->create({
+ numbers => [1, 2, 3]
+ });
+
+ $row->update(
+ {
+ numbers => [1, 2, 3]
+ },
+ {
+ day => '2008-11-24'
+ }
+ );
+
+In conditions (eg. C<\%cond> in the L<DBIx::Class::ResultSet/search> family of
+methods) you cannot directly use array references (since this is interpreted as
+a list of values to be C<OR>ed), but you can use the following syntax to force
+passing them as bind values:
+
+ $resultset->search(
+ {
+ numbers => \[ '= ?', [numbers => [1, 2, 3]] ]
+ }
+ );
+
+See L<SQL::Abstract/array_datatypes> and L<SQL::Abstract/Literal SQL with
+placeholders and bind values (subqueries)> for more explanation. Note that
+L<DBIx::Class> sets L<SQL::Abstract/bindtype> to C<columns>, so you must pass
+the bind values (the C<[1, 2, 3]> arrayref in the above example) wrapped in
+arrayrefs together with the column name, like this: C<< [column_name => value]
+>>.
+
=head1 BOOTSTRAPPING/MIGRATING
=head2 Easy migration from class-based to schema-based setup
statement and dig down to see if certain parameters cause aberrant behavior.
You might want to check out L<DBIx::Class::QueryLog> as well.
+=head1 STARTUP SPEED
+
+L<DBIx::Class|DBIx::Class> programs can have a significant startup delay
+as the ORM loads all the relevant classes. This section examines
+techniques for reducing the startup delay.
+
+These tips are are listed in order of decreasing effectiveness - so the
+first tip, if applicable, should have the greatest effect on your
+application.
+
+=head2 Statically Define Your Schema
+
+If you are using
+L<DBIx::Class::Schema::Loader|DBIx::Class::Schema::Loader> to build the
+classes dynamically based on the database schema then there will be a
+significant startup delay.
+
+For production use a statically defined schema (which can be generated
+using L<DBIx::Class::Schema::Loader|DBIx::Class::Schema::Loader> to dump
+the database schema once - see
+L<make_schema_at|DBIx::Class::Schema::Loader/make_schema_at> and
+L<dump_directory|DBIx::Class::Schema::Loader/dump_directory> for more
+details on creating static schemas from a database).
+
+=head2 Move Common Startup into a Base Class
+
+Typically L<DBIx::Class> result classes start off with
+
+ use base qw/DBIx::Class/;
+ __PACKAGE__->load_components(qw/InflateColumn::DateTime Core/);
+
+If this preamble is moved into a common base class:-
+
+ package MyDBICbase;
+
+ use base qw/DBIx::Class/;
+ __PACKAGE__->load_components(qw/InflateColumn::DateTime Core/);
+ 1;
+
+and each result class then uses this as a base:-
+
+ use base qw/MyDBICbase/;
+
+then the load_components is only performed once, which can result in a
+considerable startup speedup for schemas with many classes.
+
+=head2 Explicitly List Schema Result Classes
+
+The schema class will normally contain
+
+ __PACKAGE__->load_classes();
+
+to load the result classes. This will use L<Module::Find|Module::Find>
+to find and load the appropriate modules. Explicitly defining the
+classes you wish to load will remove the overhead of
+L<Module::Find|Module::Find> and the related directory operations:-
+
+ __PACKAGE__->load_classes(qw/ CD Artist Track /);
+
+If you are instead using the L<load_namespaces|DBIx::Class::Schema/load_namespaces>
+syntax to load the appropriate classes there is not a direct alternative
+avoiding L<Module::Find|Module::Find>.
=cut