+# -*- Mode: cperl; coding: utf-8; cperl-indent-level: 4 -*-
package CPAN::Mirrored::By;
+use strict;
+use vars qw($VERSION);
+$VERSION = sprintf "%.2f", substr(q$Rev: 469 $,4)/100;
sub new {
my($self,@arg) = @_;
package CPAN::FirstTime;
use strict;
-use ExtUtils::MakeMaker qw(prompt);
+use ExtUtils::MakeMaker ();
use FileHandle ();
use File::Basename ();
use File::Path ();
+use File::Spec;
use vars qw($VERSION);
-$VERSION = substr q$Revision: 1.38 $, 10;
+$VERSION = sprintf "%.2f", substr(q$Rev: 469 $,4)/100;
=head1 NAME
=head1 DESCRIPTION
-The init routine asks a few questions and writes a CPAN::Config
-file. Nothing special.
+The init routine asks a few questions and writes a CPAN/Config.pm or
+CPAN/MyConfig.pm file (depending on what it is currently using).
+
=cut
+use vars qw( %prompts );
sub init {
- my($configpm) = @_;
+ my($configpm, %args) = @_;
use Config;
+ # extra arg in 'o conf init make' selects only $item =~ /make/
+ my $matcher = $args{args} && @{$args{args}} ? $args{args}[0] : '';
+ CPAN->debug("matcher[$matcher]") if $CPAN::DEBUG;
+
unless ($CPAN::VERSION) {
require CPAN::Nox;
}
local($\) = "";
local($|) = 1;
- my($ans,$default,$local,$cont,$url,$expected_size);
+ my($ans,$default);
#
# Files, directories
#
- print qq[
+ print $prompts{manual_config};
-CPAN is the world-wide archive of perl resources. It consists of about
-100 sites that all replicate the same contents all around the globe.
-Many countries have at least one CPAN site already. The resources
-found on CPAN are easily accessible with the CPAN.pm module. If you
-want to use CPAN.pm, you have to configure it properly.
+ my $manual_conf;
-If you do not want to enter a dialog now, you can answer 'no' to this
-question and I\'ll try to autoconfigure. (Note: you can revisit this
-dialog anytime later by typing 'o conf init' at the cpan prompt.)
-
-];
-
- my $manual_conf =
- ExtUtils::MakeMaker::prompt("Are you ready for manual configuration?",
- "yes");
+ local *_real_prompt = \&ExtUtils::MakeMaker::prompt;
+ if ( $args{autoconfig} ) {
+ $manual_conf = "no";
+ } else {
+ $manual_conf = prompt("Are you ready for manual configuration?", "yes");
+ }
my $fastread;
{
- local $^W;
- if ($manual_conf =~ /^\s*y/i) {
+ if ($manual_conf =~ /^y/i) {
$fastread = 0;
- *prompt = \&ExtUtils::MakeMaker::prompt;
} else {
$fastread = 1;
$CPAN::Config->{urllist} ||= [];
+
+ local $^W = 0;
# prototype should match that of &MakeMaker::prompt
- *prompt = sub ($;$) {
+ *_real_prompt = sub ($;$) {
my($q,$a) = @_;
my($ret) = defined $a ? $a : "";
- printf qq{%s [%s]\n\n}, $q, $ret;
+ $CPAN::Frontend->myprint(sprintf qq{%s [%s]\n\n}, $q, $ret);
+ eval { require Time::HiRes };
+ unless ($@) {
+ Time::HiRes::sleep(0.1);
+ }
$ret;
};
}
}
- print qq{
-The following questions are intended to help you with the
-configuration. The CPAN module needs a directory of its own to cache
-important index files and maybe keep a temporary mirror of CPAN files.
-This may be a site-wide directory or a personal directory.
+ $CPAN::Frontend->myprint($prompts{config_intro})
+ if !$matcher or 'config_intro' =~ /$matcher/;
-};
+ my $cpan_home = $CPAN::Config->{cpan_home}
+ || File::Spec->catdir($ENV{HOME}, ".cpan");
- my $cpan_home = $CPAN::Config->{cpan_home} || MM->catdir($ENV{HOME}, ".cpan");
if (-d $cpan_home) {
- print qq{
+ if (!$matcher or 'config_intro' =~ /$matcher/) {
+ $CPAN::Frontend->myprint(qq{
I see you already have a directory
$cpan_home
Shall we use it as the general CPAN build and cache directory?
-};
+});
+ }
} else {
- print qq{
-
-First of all, I\'d like to create this directory. Where?
-
-};
+ # no cpan-home, must prompt and get one
+ $CPAN::Frontend->myprint($prompts{cpan_home_where});
}
$default = $cpan_home;
while ($ans = prompt("CPAN build and cache directory?",$default)) {
+ unless (File::Spec->file_name_is_absolute($ans)) {
+ require Cwd;
+ my $cwd = Cwd::cwd();
+ my $absans = File::Spec->catdir($cwd,$ans);
+ warn "The path '$ans' is not an absolute path. Please specify an absolute path\n";
+ $default = $absans;
+ next;
+ }
eval { File::Path::mkpath($ans); }; # dies if it can't
if ($@) {
- warn "Couldn't create directory $ans.
-Please retry.\n";
+ warn "Couldn't create directory $ans.\nPlease retry.\n";
next;
}
if (-d $ans && -w _) {
last;
} else {
- warn "Couldn't find directory $ans
- or directory is not writable. Please retry.\n";
+ warn "Couldn't find directory $ans\n"
+ . "or directory is not writable. Please retry.\n";
}
}
$CPAN::Config->{cpan_home} = $ans;
- print qq{
-
-If you want, I can keep the source files after a build in the cpan
-home directory. If you choose so then future builds will take the
-files from there. If you don\'t want to keep them, answer 0 to the
-next question.
+ $CPAN::Frontend->myprint($prompts{keep_source_where});
-};
+ $CPAN::Config->{keep_source_where}
+ = File::Spec->catdir($CPAN::Config->{cpan_home},"sources");
- $CPAN::Config->{keep_source_where} = MM->catdir($CPAN::Config->{cpan_home},"sources");
- $CPAN::Config->{build_dir} = MM->catdir($CPAN::Config->{cpan_home},"build");
+ $CPAN::Config->{build_dir}
+ = File::Spec->catdir($CPAN::Config->{cpan_home},"build");
#
# Cache size, Index expire
#
- print qq{
-
-How big should the disk cache be for keeping the build directories
-with all the intermediate files?
+ $CPAN::Frontend->myprint($prompts{build_cache_intro})
+ if !$matcher or 'build_cache_intro' =~ /$matcher/;
-};
-
- $default = $CPAN::Config->{build_cache} || 10;
- $ans = prompt("Cache size for build directory (in MB)?", $default);
- $CPAN::Config->{build_cache} = $ans;
+ # large enough to build large dists like Tk
+ my_dflt_prompt(build_cache => 100, $matcher);
# XXX This the time when we refetch the index files (in days)
$CPAN::Config->{'index_expire'} = 1;
- print qq{
+ $CPAN::Frontend->myprint($prompts{scan_cache_intro})
+ if !$matcher or 'build_cache_intro' =~ /$matcher/;
+
+ my_prompt_loop(scan_cache => 'atstart', $matcher, 'atstart|never');
+
+ #
+ # cache_metadata
+ #
-By default, each time the CPAN module is started, cache scanning
-is performed to keep the cache size in sync. To prevent from this,
-disable the cache scanning with 'never'.
+ if (!$matcher or 'build_cache_intro' =~ /$matcher/) {
+
+ $CPAN::Frontend->myprint($prompts{cache_metadata});
+
+ defined($default = $CPAN::Config->{cache_metadata}) or $default = 1;
+ do {
+ $ans = prompt("Cache metadata (yes/no)?", ($default ? 'yes' : 'no'));
+ } while ($ans !~ /^[yn]/i);
+ $CPAN::Config->{cache_metadata} = ($ans =~ /^y/i ? 1 : 0);
+ }
+ #
+ # term_is_latin
+ #
-};
+ $CPAN::Frontend->myprint($prompts{term_is_latin})
+ if !$matcher or 'term_is_latin' =~ /$matcher/;
- $default = $CPAN::Config->{scan_cache} || 'atstart';
+ defined($default = $CPAN::Config->{term_is_latin}) or $default = 1;
do {
- $ans = prompt("Perform cache scanning (atstart or never)?", $default);
- } while ($ans ne 'atstart' && $ans ne 'never');
- $CPAN::Config->{scan_cache} = $ans;
+ $ans = prompt("Your terminal expects ISO-8859-1 (yes/no)?",
+ ($default ? 'yes' : 'no'));
+ } while ($ans !~ /^[yn]/i);
+ $CPAN::Config->{term_is_latin} = ($ans =~ /^y/i ? 1 : 0);
+
+ #
+ # save history in file 'histfile'
+ #
+
+ $CPAN::Frontend->myprint($prompts{histfile_intro});
+
+ defined($default = $CPAN::Config->{histfile}) or
+ $default = File::Spec->catfile($CPAN::Config->{cpan_home},"histfile");
+ $ans = prompt("File to save your history?", $default);
+ $CPAN::Config->{histfile} = $ans;
+
+ if ($CPAN::Config->{histfile}) {
+ defined($default = $CPAN::Config->{histsize}) or $default = 100;
+ $ans = prompt("Number of lines to save?", $default);
+ $CPAN::Config->{histsize} = $ans;
+ }
+
+ #
+ # do an ls on the m or the d command
+ #
+ $CPAN::Frontend->myprint($prompts{show_upload_date_intro});
+
+ defined($default = $CPAN::Config->{show_upload_date}) or
+ $default = 'n';
+ $ans = prompt("Always try to show upload date with 'd' and 'm' command (yes/no)?",
+ ($default ? 'yes' : 'no'));
+ $CPAN::Config->{show_upload_date} = ($ans =~ /^[y1]/i ? 1 : 0);
+
+ #my_prompt_loop(show_upload_date => 'n', $matcher,
+ #'follow|ask|ignore');
#
# prerequisites_policy
# Do we follow PREREQ_PM?
#
- print qq{
-The CPAN module can detect when a module that which you are trying to
-build depends on prerequisites. If this happens, it can build the
-prerequisites for you automatically ('follow'), ask you for
-confirmation ('ask'), or just ignore them ('ignore'). Please set your
-policy to one of the three values.
+ $CPAN::Frontend->myprint($prompts{prerequisites_policy_intro})
+ if !$matcher or 'prerequisites_policy_intro' =~ /$matcher/;
-};
+ my_prompt_loop(prerequisites_policy => 'ask', $matcher,
+ 'follow|ask|ignore');
- $default = $CPAN::Config->{prerequisites_policy} || 'follow';
- do {
- $ans =
- prompt("Policy on building prerequisites (follow, ask or ignore)?",
- $default);
- } while ($ans ne 'follow' && $ans ne 'ask' && $ans ne 'ignore');
- $CPAN::Config->{prerequisites_policy} = $ans;
#
# External programs
#
- print qq{
-
-The CPAN module will need a few external programs to work
-properly. Please correct me, if I guess the wrong path for a program.
-Don\'t panic if you do not have some of them, just press ENTER for
-those.
-
-};
+ $CPAN::Frontend->myprint($prompts{external_progs})
+ if !$matcher or 'external_progs' =~ /$matcher/;
my $old_warn = $^W;
local $^W if $^O eq 'MacOS';
my(@path) = split /$Config{'path_sep'}/, $ENV{'PATH'};
local $^W = $old_warn;
my $progname;
- for $progname (qw/gzip tar unzip make lynx ncftpget ncftp ftp/){
+ for $progname (qw/bzip2 gzip tar unzip make
+ curl lynx wget ncftpget ncftp ftp
+ gpg/)
+ {
if ($^O eq 'MacOS') {
$CPAN::Config->{$progname} = 'not_here';
next;
}
+ next if $matcher && $progname !~ /$matcher/;
+
my $progcall = $progname;
# we don't need ncftp if we have ncftpget
next if $progname eq "ncftp" && $CPAN::Config->{ncftpget} gt " ";
my $path = $CPAN::Config->{$progname}
|| $Config::Config{$progname}
|| "";
- if (MM->file_name_is_absolute($path)) {
+ if (File::Spec->file_name_is_absolute($path)) {
# testing existence is not good enough, some have these exe
# extensions
}
$path ||= find_exe($progcall,[@path]);
- warn "Warning: $progcall not found in PATH\n" unless
+ $CPAN::Frontend->mywarn("Warning: $progcall not found in PATH\n") unless
$path; # not -e $path, because find_exe already checked that
$ans = prompt("Where is your $progname program?",$path) || $path;
$CPAN::Config->{$progname} = $ans;
$ans = prompt("What is your favorite pager program?",$path);
$CPAN::Config->{'pager'} = $ans;
$path = $CPAN::Config->{'shell'};
- if (MM->file_name_is_absolute($path)) {
+ if (File::Spec->file_name_is_absolute($path)) {
warn "Warning: configured $path does not exist\n" unless -e $path;
$path = "";
}
$path ||= $ENV{SHELL};
+ $path ||= $ENV{COMSPEC} if $^O eq "MSWin32";
if ($^O eq 'MacOS') {
$CPAN::Config->{'shell'} = 'not_here';
} else {
# Arguments to make etc.
#
- print qq{
+ $CPAN::Frontend->myprint($prompts{prefer_installer_intro})
+ if !$matcher or 'prerequisites_policy_intro' =~ /$matcher/;
-Every Makefile.PL is run by perl in a separate process. Likewise we
-run \'make\' and \'make install\' in processes. If you have any parameters
-\(e.g. PREFIX, INSTALLPRIVLIB, UNINST or the like\) you want to pass to
-the calls, please specify them here.
+ my_prompt_loop(prefer_installer => 'EUMM', $matcher, 'MB|EUMM');
-If you don\'t understand this question, just press ENTER.
-};
+ $CPAN::Frontend->myprint($prompts{makepl_arg_intro})
+ if !$matcher or 'makepl_arg_intro' =~ /$matcher/;
+
+ my_dflt_prompt(makepl_arg => "", $matcher);
+
+ my_dflt_prompt(make_arg => "", $matcher);
+
+ my_dflt_prompt(make_install_make_command => $CPAN::Config->{make} || "",
+ $matcher);
+
+ my_dflt_prompt(make_install_arg => $CPAN::Config->{make_arg} || "",
+ $matcher);
+
+ $CPAN::Frontend->myprint($prompts{mbuildpl_arg_intro})
+ if !$matcher or 'mbuildpl_arg_intro' =~ /$matcher/;
+
+ my_dflt_prompt(mbuildpl_arg => "", $matcher);
- $default = $CPAN::Config->{makepl_arg} || "";
- $CPAN::Config->{makepl_arg} =
- prompt("Parameters for the 'perl Makefile.PL' command?",$default);
- $default = $CPAN::Config->{make_arg} || "";
- $CPAN::Config->{make_arg} = prompt("Parameters for the 'make' command?",$default);
+ my_dflt_prompt(mbuild_arg => "", $matcher);
- $default = $CPAN::Config->{make_install_arg} || $CPAN::Config->{make_arg} || "";
- $CPAN::Config->{make_install_arg} =
- prompt("Parameters for the 'make install' command?",$default);
+ my_dflt_prompt(mbuild_install_build_command => "./Build", $matcher);
+
+ my_dflt_prompt(mbuild_install_arg => "", $matcher);
#
# Alarm period
#
- print qq{
+ $CPAN::Frontend->myprint($prompts{inactivity_timeout_intro})
+ if !$matcher or 'inactivity_timeout_intro' =~ /$matcher/;
-Sometimes you may wish to leave the processes run by CPAN alone
-without caring about them. As sometimes the Makefile.PL contains
-question you\'re expected to answer, you can set a timer that will
-kill a 'perl Makefile.PL' process after the specified time in seconds.
-
-If you set this value to 0, these processes will wait forever. This is
-the default and recommended setting.
-
-};
+ # my_dflt_prompt(inactivity_timeout => 0);
$default = $CPAN::Config->{inactivity_timeout} || 0;
$CPAN::Config->{inactivity_timeout} =
- prompt("Timeout for inactivity during Makefile.PL?",$default);
+ prompt("Timeout for inactivity during {Makefile,Build}.PL?",$default);
# Proxies
- print qq{
-
-If you\'re accessing the net via proxies, you can specify them in the
-CPAN configuration or via environment variables. The variable in
-the \$CPAN::Config takes precedence.
-
-};
+ $CPAN::Frontend->myprint($prompts{proxy_intro})
+ if !$matcher or 'proxy_intro' =~ /$matcher/;
for (qw/ftp_proxy http_proxy no_proxy/) {
+ next if $matcher and $_ =~ /$matcher/;
+
$default = $CPAN::Config->{$_} || $ENV{$_};
$CPAN::Config->{$_} = prompt("Your $_?",$default);
}
+ if ($CPAN::Config->{ftp_proxy} ||
+ $CPAN::Config->{http_proxy}) {
+
+ $default = $CPAN::Config->{proxy_user} || $CPAN::LWP::UserAgent::USER;
+
+ $CPAN::Frontend->myprint($prompts{proxy_user});
+
+ if ($CPAN::Config->{proxy_user} = prompt("Your proxy user id?",$default)) {
+ $CPAN::Frontend->myprint($prompts{proxy_pass});
+
+ if ($CPAN::META->has_inst("Term::ReadKey")) {
+ Term::ReadKey::ReadMode("noecho");
+ } else {
+ $CPAN::Frontend->myprint($prompts{password_warn});
+ }
+ $CPAN::Config->{proxy_pass} = prompt_no_strip("Your proxy password?");
+ if ($CPAN::META->has_inst("Term::ReadKey")) {
+ Term::ReadKey::ReadMode("restore");
+ }
+ $CPAN::Frontend->myprint("\n\n");
+ }
+ }
+
#
# MIRRORED.BY
#
conf_sites() unless $fastread;
- unless (@{$CPAN::Config->{'wait_list'}||[]}) {
- print qq{
+ # We don't ask these now, the defaults are very likely OK.
+ $CPAN::Config->{inhibit_startup_message} = 0;
+ $CPAN::Config->{getcwd} = 'cwd';
+ $CPAN::Config->{ftp_passive} = 1;
-WAIT support is available as a Plugin. You need the CPAN::WAIT module
-to actually use it. But we need to know your favorite WAIT server. If
-you don\'t know a WAIT server near you, just press ENTER.
+ $CPAN::Frontend->myprint("\n\n");
+ CPAN::HandleConfig->commit($configpm);
+}
-};
- $default = "wait://ls6.informatik.uni-dortmund.de:1404";
- $ans = prompt("Your favorite WAIT server?\n ",$default);
- push @{$CPAN::Config->{'wait_list'}}, $ans;
+sub my_dflt_prompt {
+ my ($item, $dflt, $m) = @_;
+ my $default = $CPAN::Config->{$item} || $dflt;
+
+ $DB::single = 1;
+ if (!$m || $item =~ /$m/) {
+ $CPAN::Config->{$item} = prompt($prompts{$item}, $default);
+ } else {
+ $CPAN::Config->{$item} = $default;
}
+}
- # We don't ask that now, it will be noticed in time, won't it?
- $CPAN::Config->{'inhibit_startup_message'} = 0;
- $CPAN::Config->{'getcwd'} = 'cwd';
+sub my_prompt_loop {
+ my ($item, $dflt, $m, $ok) = @_;
+ my $default = $CPAN::Config->{$item} || $dflt;
+ my $ans;
- print "\n\n";
- CPAN::Config->commit($configpm);
+ $DB::single = 1;
+ if (!$m || $item =~ /$m/) {
+ do { $ans = prompt($prompts{$item}, $default);
+ } until $ans =~ /$ok/;
+ $CPAN::Config->{$item} = $ans;
+ } else {
+ $CPAN::Config->{$item} = $default;
+ }
}
+
sub conf_sites {
my $m = 'MIRRORED.BY';
- my $mby = MM->catfile($CPAN::Config->{keep_source_where},$m);
+ my $mby = File::Spec->catfile($CPAN::Config->{keep_source_where},$m);
File::Path::mkpath(File::Basename::dirname($mby));
if (-f $mby && -f $m && -M $m < -M $mby) {
require File::Copy;
File::Copy::copy($m,$mby) or die "Could not update $mby: $!";
}
my $loopcount = 0;
- while () {
- if ( ! -f $mby ){
- print qq{You have no $mby
- I\'m trying to fetch one
-};
+ local $^T = time;
+ my $overwrite_local = 0;
+ if ($mby && -f $mby && -M _ <= 60 && -s _ > 0) {
+ my $mtime = localtime((stat _)[9]);
+ my $prompt = qq{Found $mby as of $mtime
+
+I\'d use that as a database of CPAN sites. If that is OK for you,
+please answer 'y', but if you want me to get a new database now,
+please answer 'n' to the following question.
+
+Shall I use the local database in $mby?};
+ my $ans = prompt($prompt,"y");
+ $overwrite_local = 1 unless $ans =~ /^y/i;
+ }
+ while ($mby) {
+ if ($overwrite_local) {
+ print qq{Trying to overwrite $mby\n};
+ $mby = CPAN::FTP->localize($m,$mby,3);
+ $overwrite_local = 0;
+ } elsif ( ! -f $mby ){
+ print qq{You have no $mby\n I\'m trying to fetch one\n};
$mby = CPAN::FTP->localize($m,$mby,3);
} elsif (-M $mby > 60 && $loopcount == 0) {
- print qq{Your $mby is older than 60 days,
- I\'m trying to fetch one
-};
+ print qq{Your $mby is older than 60 days,\n I\'m trying to fetch one\n};
$mby = CPAN::FTP->localize($m,$mby,3);
$loopcount++;
} elsif (-s $mby == 0) {
- print qq{You have an empty $mby,
- I\'m trying to fetch one
-};
+ print qq{You have an empty $mby,\n I\'m trying to fetch one\n};
$mby = CPAN::FTP->localize($m,$mby,3);
} else {
last;
}
}
read_mirrored_by($mby);
+ bring_your_own();
}
sub find_exe {
my($dir);
#warn "in find_exe exe[$exe] path[@$path]";
for $dir (@$path) {
- my $abs = MM->catfile($dir,$exe);
+ my $abs = File::Spec->catfile($dir,$exe);
if (($abs = MM->maybe_command($abs))) {
return $abs;
}
my($items,$prompt,$default,$require_nonempty,$empty_warning)=@_;
$default ||= '';
- my ($item, $i);
- for $item (@$items) {
- printf "(%d) %s\n", ++$i, $item;
- }
+ my $pos = 0;
my @nums;
while (1) {
- my $num = prompt($prompt,$default);
- @nums = split (' ', $num);
- (warn "invalid items entered, try again\n"), next
- if grep (/\D/ || $_ < 1 || $_ > $i, @nums);
- if ($require_nonempty) {
- (warn "$empty_warning\n"), next
- unless @nums;
- }
- last;
+
+ # display, at most, 15 items at a time
+ my $limit = $#{ $items } - $pos;
+ $limit = 15 if $limit > 15;
+
+ # show the next $limit items, get the new position
+ $pos = display_some($items, $limit, $pos);
+ $pos = 0 if $pos >= @$items;
+
+ my $num = prompt($prompt,$default);
+
+ @nums = split (' ', $num);
+ my $i = scalar @$items;
+ (warn "invalid items entered, try again\n"), next
+ if grep (/\D/ || $_ < 1 || $_ > $i, @nums);
+ if ($require_nonempty) {
+ (warn "$empty_warning\n");
+ }
+ print "\n";
+
+ # a blank line continues...
+ next unless @nums;
+ last;
}
- print "\n";
for (@nums) { $_-- }
@{$items}[@nums];
}
+sub display_some {
+ my ($items, $limit, $pos) = @_;
+ $pos ||= 0;
+
+ my @displayable = @$items[$pos .. ($pos + $limit)];
+ for my $item (@displayable) {
+ printf "(%d) %s\n", ++$pos, $item;
+ }
+ printf("%d more items, hit SPACE RETURN to show them\n",
+ (@$items - $pos)
+ )
+ if $pos < @$items;
+ return $pos;
+}
+
sub read_mirrored_by {
- my($local) = @_;
- my(%all,$url,$expected_size,$default,$ans,$host,$dst,$country,$continent,@location);
+ my $local = shift or return;
+ my(%all,$url,$expected_size,$default,$ans,$host,
+ $dst,$country,$continent,@location);
my $fh = FileHandle->new;
$fh->open($local) or die "Couldn't open $local: $!";
local $/ = "\012";
$CPAN::Config->{urllist} = [];
}
- print qq{
-
-Now we need to know where your favorite CPAN sites are located. Push
-a few sites onto the array (just in case the first on the array won\'t
-work). If you are mirroring CPAN to your local workstation, specify a
-file: URL.
-
-First, pick a nearby continent and country (you can pick several of
-each, separated by spaces, or none if you just want to keep your
-existing selections). Then, you will be presented with a list of URLs
-of CPAN mirrors in the countries you selected, along with previously
-selected URLs. Select some of those URLs, or just keep the old list.
-Finally, you will be prompted for any extra URLs -- file:, ftp:, or
-http: -- that host a CPAN mirror.
-
-};
+ print $prompts{urls_intro};
my (@cont, $cont, %cont, @countries, @urls, %seen);
my $no_previous_warn =
}
}
push (@urls, map ("$_ (previous pick)", @previous_urls));
- my $prompt = "Select as many URLs as you like";
+ my $prompt = "Select as many URLs as you like (by number),
+put them on one line, separated by blanks, e.g. '1 4 5'";
if (@previous_urls) {
$default = join (' ', ((scalar @urls) - (scalar @previous_urls) + 1) ..
(scalar @urls));
@urls = picklist (\@urls, $prompt, $default);
foreach (@urls) { s/ \(.*\)//; }
- %seen = map (($_ => 1), @urls);
+ push @{$CPAN::Config->{urllist}}, @urls;
+}
+sub bring_your_own {
+ my %seen = map (($_ => 1), @{$CPAN::Config->{urllist}});
+ my($ans,@urls);
do {
- $ans = prompt ("Enter another URL or RETURN to quit:", "");
+ my $prompt = "Enter another URL or RETURN to quit:";
+ unless (%seen) {
+ $prompt = qq{CPAN.pm needs at least one URL where it can fetch CPAN files from.
+
+Please enter your CPAN site:};
+ }
+ $ans = prompt ($prompt, "");
if ($ans) {
- $ans =~ s|/?$|/|; # has to end with one slash
+ $ans =~ s|/?\z|/|; # has to end with one slash
$ans = "file:$ans" unless $ans =~ /:/; # without a scheme is a file:
if ($ans =~ /^\w+:\/./) {
- push @urls, $ans
- unless $seen{$ans};
- }
- else {
- print qq{"$ans" doesn\'t look like an URL at first sight.
-I\'ll ignore it for now. You can add it to $INC{'CPAN/MyConfig.pm'}
-later if you\'re sure it\'s right.\n};
+ push @urls, $ans unless $seen{$ans}++;
+ } else {
+ printf(qq{"%s" doesn\'t look like an URL at first sight.
+I\'ll ignore it for now.
+You can add it to your %s
+later if you\'re sure it\'s right.\n},
+ $ans,
+ $INC{'CPAN/MyConfig.pm'} || $INC{'CPAN/Config.pm'} || "configuration file",
+ );
}
}
- } while $ans;
+ } while $ans || !%seen;
push @{$CPAN::Config->{urllist}}, @urls;
# xxx delete or comment these out when you're happy that it works
map { print " $_\n" } @{$CPAN::Config->{urllist}};
}
+
+sub _strip_spaces {
+ $_[0] =~ s/^\s+//; # no leading spaces
+ $_[0] =~ s/\s+\z//; # no trailing spaces
+}
+
+
+sub prompt ($;$) {
+ my $ans = _real_prompt(@_);
+
+ _strip_spaces($ans);
+
+ return $ans;
+}
+
+
+sub prompt_no_strip ($;$) {
+ return _real_prompt(@_);
+}
+
+
+BEGIN {
+
+my @prompts = (
+
+manual_config => qq[
+
+CPAN is the world-wide archive of perl resources. It consists of about
+100 sites that all replicate the same contents all around the globe.
+Many countries have at least one CPAN site already. The resources
+found on CPAN are easily accessible with the CPAN.pm module. If you
+want to use CPAN.pm, you have to configure it properly.
+
+If you do not want to enter a dialog now, you can answer 'no' to this
+question and I\'ll try to autoconfigure. (Note: you can revisit this
+dialog anytime later by typing 'o conf init' at the cpan prompt.)
+
+],
+
+config_intro => qq{
+
+The following questions are intended to help you with the
+configuration. The CPAN module needs a directory of its own to cache
+important index files and maybe keep a temporary mirror of CPAN files.
+This may be a site-wide directory or a personal directory.
+
+},
+
+# cpan_home => qq{ },
+
+cpan_home_where => qq{
+
+First of all, I\'d like to create this directory. Where?
+
+},
+
+keep_source_where => qq{
+
+If you like, I can cache the source files after I build them. Doing
+so means that, if you ever rebuild that module in the future, the
+files will be taken from the cache. The tradeoff is that it takes up
+space. How much space would you like to allocate to this cache? (If
+you don\'t want me to keep a cache, answer 0.)
+
+},
+
+build_cache_intro => qq{
+
+How big should the disk cache be for keeping the build directories
+with all the intermediate files\?
+
+},
+
+build_cache =>
+"Cache size for build directory (in MB)?",
+
+
+scan_cache_intro => qq{
+
+By default, each time the CPAN module is started, cache scanning is
+performed to keep the cache size in sync. To prevent this, answer
+'never'.
+
+},
+
+scan_cache => "Perform cache scanning (atstart or never)?",
+
+cache_metadata => qq{
+
+To considerably speed up the initial CPAN shell startup, it is
+possible to use Storable to create a cache of metadata. If Storable
+is not available, the normal index mechanism will be used.
+
+},
+
+term_is_latin => qq{
+
+The next option deals with the charset (aka character set) your
+terminal supports. In general, CPAN is English speaking territory, so
+the charset does not matter much, but some of the aliens out there who
+upload their software to CPAN bear names that are outside the ASCII
+range. If your terminal supports UTF-8, you should say no to the next
+question. If it supports ISO-8859-1 (also known as LATIN1) then you
+should say yes. If it supports neither, your answer does not matter
+because you will not be able to read the names of some authors
+anyway. If you answer no, names will be output in UTF-8.
+
+},
+
+histfile_intro => qq{
+
+If you have one of the readline packages (Term::ReadLine::Perl,
+Term::ReadLine::Gnu, possibly others) installed, the interactive CPAN
+shell will have history support. The next two questions deal with the
+filename of the history file and with its size. If you do not want to
+set this variable, please hit SPACE RETURN to the following question.
+
+},
+
+histfile => qq{File to save your history?},
+
+show_upload_date_intro => qq{
+
+The 'd' and the 'm' command normally only show you information they
+have in their in-memory database and thus will never connect to the
+internet. If you set the 'show_upload_date' variable to true, 'm' and
+'d' will additionally show you the upload date of the module or
+distribution. Per default this feature is off because it may require a
+net connection to get at the upload date.
+
+},
+
+show_upload_date =>
+"Always try to show upload date with 'd' and 'm' command (yes/no)?",
+
+prerequisites_policy_intro => qq{
+
+The CPAN module can detect when a module which you are trying to build
+depends on prerequisites. If this happens, it can build the
+prerequisites for you automatically ('follow'), ask you for
+confirmation ('ask'), or just ignore them ('ignore'). Please set your
+policy to one of the three values.
+
+},
+
+prerequisites_policy =>
+"Policy on building prerequisites (follow, ask or ignore)?",
+
+external_progs => qq{
+
+The CPAN module will need a few external programs to work properly.
+Please correct me, if I guess the wrong path for a program. Don\'t
+panic if you do not have some of them, just press ENTER for those. To
+disable the use of a download program, you can type a space followed
+by ENTER.
+
+},
+
+prefer_installer_intro => qq{
+
+When you have Module::Build installed and a module comes with both a
+Makefile.PL and a Build.PL, which shall have precedence? The two
+installer modules we have are the old and well established
+ExtUtils::MakeMaker (for short: EUMM) understands the Makefile.PL and
+the next generation installer Module::Build (MB) works with the
+Build.PL.
+
+},
+
+prefer_installer =>
+qq{In case you could choose, which installer would you prefer (EUMM or MB)?},
+
+makepl_arg_intro => qq{
+
+Every Makefile.PL is run by perl in a separate process. Likewise we
+run \'make\' and \'make install\' in separate processes. If you have
+any parameters \(e.g. PREFIX, LIB, UNINST or the like\) you want to
+pass to the calls, please specify them here.
+
+If you don\'t understand this question, just press ENTER.
+},
+
+makepl_arg => qq{
+Parameters for the 'perl Makefile.PL' command?
+Typical frequently used settings:
+
+ PREFIX=~/perl # non-root users (please see manual for more hints)
+
+Your choice: },
+
+make_arg => qq{Parameters for the 'make' command?
+Typical frequently used setting:
+
+ -j3 # dual processor system
+
+Your choice: },
+
+
+make_install_make_command => qq{Do you want to use a different make command for 'make install'?
+Cautious people will probably prefer:
+
+ su root -c make
+or
+ sudo make
+or
+ /path1/to/sudo -u admin_account /path2/to/make
+
+or some such. Your choice: },
+
+
+make_install_arg => qq{Parameters for the 'make install' command?
+Typical frequently used setting:
+
+ UNINST=1 # to always uninstall potentially conflicting files
+
+Your choice: },
+
+
+mbuildpl_arg_intro => qq{
+
+The next questions deal with Module::Build support.
+
+A Build.PL is run by perl in a separate process. Likewise we run
+'./Build' and './Build install' in separate processes. If you have any
+parameters you want to pass to the calls, please specify them here.
+
+},
+
+mbuildpl_arg => qq{Parameters for the 'perl Build.PL' command?
+Typical frequently used settings:
+
+ --install_base /home/xxx # different installation directory
+
+Your choice: },
+
+mbuild_arg => qq{Parameters for the './Build' command?
+Setting might be:
+
+ --extra_linker_flags -L/usr/foo/lib # non-standard library location
+
+Your choice: },
+
+
+mbuild_install_build_command => qq{Do you want to use a different command for './Build install'?
+Sudo users will probably prefer:
+
+ su root -c ./Build
+or
+ sudo ./Build
+or
+ /path1/to/sudo -u admin_account ./Build
+
+or some such. Your choice: },
+
+
+mbuild_install_arg => qq{Parameters for the './Build install' command?
+Typical frequently used setting:
+
+ --uninst 1 # uninstall conflicting files
+
+Your choice: },
+
+
+
+inactivity_timeout_intro => qq{
+
+Sometimes you may wish to leave the processes run by CPAN alone
+without caring about them. Because the Makefile.PL sometimes contains
+question you\'re expected to answer, you can set a timer that will
+kill a 'perl Makefile.PL' process after the specified time in seconds.
+
+If you set this value to 0, these processes will wait forever. This is
+the default and recommended setting.
+
+},
+
+inactivity_timeout =>
+qq{Timeout for inactivity during {Makefile,Build}.PL? },
+
+
+proxy_intro => qq{
+
+If you\'re accessing the net via proxies, you can specify them in the
+CPAN configuration or via environment variables. The variable in
+the \$CPAN::Config takes precedence.
+
+},
+
+proxy_user => qq{
+
+If your proxy is an authenticating proxy, you can store your username
+permanently. If you do not want that, just press RETURN. You will then
+be asked for your username in every future session.
+
+},
+
+proxy_pass => qq{
+
+Your password for the authenticating proxy can also be stored
+permanently on disk. If this violates your security policy, just press
+RETURN. You will then be asked for the password in every future
+session.
+
+},
+
+urls_intro => qq{
+
+Now we need to know where your favorite CPAN sites are located. Push
+a few sites onto the array (just in case the first on the array won\'t
+work). If you are mirroring CPAN to your local workstation, specify a
+file: URL.
+
+First, pick a nearby continent and country (you can pick several of
+each, separated by spaces, or none if you just want to keep your
+existing selections). Then, you will be presented with a list of URLs
+of CPAN mirrors in the countries you selected, along with previously
+selected URLs. Select some of those URLs, or just keep the old list.
+Finally, you will be prompted for any extra URLs -- file:, ftp:, or
+http: -- that host a CPAN mirror.
+
+},
+
+password_warn => qq{
+
+Warning: Term::ReadKey seems not to be available, your password will
+be echoed to the terminal!
+
+},
+
+);
+
+die "Coding error in \@prompts declaration. Odd number of elements, above"
+ if (@prompts % 2);
+
+%prompts = @prompts;
+
+if (scalar(keys %prompts) != scalar(@prompts)/2) {
+
+ my %already;
+
+ for my $item (0..$#prompts) {
+ next if $item % 2;
+ die "$prompts[$item] is duplicated\n"
+ if $already{$prompts[$item]}++;
+ }
+
+}
+
+}
+
1;
projects / p5sagit/p5-mst-13.2.git / blobdiff