# Tweaked by Chip Salzenberg <chip@perl.com> on 5/13/97
# - don't assume 'cc -n32' if the n32 libm.so is missing
+# Threaded by Jarkko Hietaniemi <jhi@iki.fi> on 11/18/97
+# - POSIX threads knowledge by IRIX version
+
+# gcc-enabled by Kurt Starsinic <kstar@isinet.com> on 3/24/1998
+
+# 64-bitty by Jarkko Hietaniemi on 9/1998
+
# Use sh Configure -Dcc='cc -n32' to try compiling with -n32.
# or -Dcc='cc -n32 -mips3' (or -mips4) to force (non)portability
# Don't bother with -n32 unless you have the 7.1 or later compilers.
case "$cc" in
*"cc -n32"*)
+ # Perl 5.004_57 introduced new qsort code into pp_ctl.c that
+ # makes IRIX cc prior to 7.2.1 to emit bad code.
+ # so some serious hackery follows to set pp_ctl flags correctly.
+
# Check for which version of the compiler we're running
case "`$cc -version 2>&1`" in
*7.0*) # Mongoose 7.0
ccflags="$ccflags -D_BSD_TYPES -D_BSD_TIME -woff 1009,1042,1048,1110,1116,1184 -OPT:Olimit=0"
- optimize='none'
+ optimize='none'
;;
- *7.*) # Mongoose 7.1+
+ *7.1*|*7.2|*7.20) # Mongoose 7.1+
ccflags="$ccflags -D_BSD_TYPES -D_BSD_TIME -woff 1009,1110,1184 -OPT:Olimit=0"
- optimize='-O3'
+ optimize='-O3'
+# This is a temporary fix for 5.005.
+# Leave pp_ctl_cflags line at left margin for Configure. See
+# hints/README.hints, especially the section
+# =head2 Propagating variables to config.sh
+pp_ctl_cflags='optimize=-O'
+ ;;
+ *7.*) # Mongoose 7.2.1+
+ ccflags="$ccflags -D_BSD_TYPES -D_BSD_TIME -woff 1009,1110,1184 -OPT:Olimit=0:space=ON"
+ optimize='-O3'
;;
*6.2*) # Ragnarok 6.2
ccflags="$ccflags -D_BSD_TYPES -D_BSD_TIME -woff 1009,1110,1184"
- optimize='none'
+ optimize='none'
;;
*) # Be safe and not optimize
- ccflags="$ccflags -D_BSD_TYPES -D_BSD_TIME -woff 1009,1110,1184 -OPT:Olimit=0"
+ ccflags="$ccflags -D_BSD_TYPES -D_BSD_TIME -woff 1009,1110,1184 -OPT:Olimit=0"
optimize='none'
;;
esac
- ld=ld
- ldflags=' -L/usr/local/lib -L/usr/lib32 -L/lib32'
+# this is to accommodate the 'modules' capability of the
+# 7.2 MIPSPro compilers, which allows for the compilers to be installed
+# in a nondefault location. Almost everything works as expected, but
+# /usr/include isn't caught properly. Hence see the /usr/include/pthread.h
+# change below to include TOOLROOT (a modules environment variable),
+# and the following code. Additional
+# code to accommodate the 'modules' environment should probably be added
+# here if possible, or be inserted as a ${TOOLROOT} reference before
+# absolute paths (again, see the pthread.h change below).
+# -- krishna@sgi.com, 8/23/98
+
+if [ "X${TOOLROOT}" != "X" ]; then
+# we cant set cppflags because it gets overwritten
+# we dont actually need $TOOLROOT/usr/include on the cc line cuz the
+# modules functionality already includes it but
+# XXX - how do I change cppflags in the hints file?
+ ccflags="$ccflags -I${TOOLROOT}/usr/include"
+ usrinc="${TOOLROOT}/usr/include"
+fi
+
+ ld=$cc
+ # perl's malloc can return improperly aligned buffer
+ # usemymalloc='undef'
+malloc_cflags='ccflags="-DSTRICT_ALIGNMENT $ccflags"'
+ # NOTE: -L/usr/lib32 -L/lib32 are automatically selected by the linker
+ ldflags=' -L/usr/local/lib32 -L/usr/local/lib'
cccdlflags=' '
+ # From: David Billinghurst <David.Billinghurst@riotinto.com.au>
+ # If you get complaints about so_locations then change the following
+ # line to something like:
+ # lddlflags="-n32 -shared -check_registry /usr/lib32/so_locations"
lddlflags="-n32 -shared"
libc='/usr/lib32/libc.so'
plibpth='/usr/lib32 /lib32 /usr/ccs/lib'
nm_opt='-p'
nm_so_opt='-p'
;;
+*gcc*)
+ ccflags="$ccflags -D_BSD_TYPES -D_BSD_TIME -D_POSIX_C_SOURCE"
+ optimize="-O3"
+ usenm='undef'
+ case "`uname -s`" in
+ # Without the -mabi=64 gcc in 64-bit IRIX has problems passing
+ # and returning small structures. This affects inet_*() and semctl().
+ # See http://reality.sgi.com/ariel/freeware/gcc-2.8.1-notes.html
+ # for more information. Reported by Lionel Cons <lionel.cons@cern.ch>.
+ IRIX64) ccflags="$ccflags -mabi=64"
+ ldflags="$ldflags -mabi=64 -L/usr/lib64"
+ lddlflags="$lddlflags -mabi=64"
+ ;;
+ *) ccflags="$ccflags -DIRIX32_SEMUN_BROKEN_BY_GCC"
+ ;;
+ esac
+ ;;
*)
# this is needed to force the old-32 paths
# since the system default can be changed.
;;
esac
-# This should be a Configure thing, but not for now...
-pp_sys_cflags='ccflags="$ccflags -DHAS_TELLDIR_PROTOTYPE"'
+# Don't groan about unused libraries.
+ldflags="$ldflags -Wl,-woff,84"
-# We don't want these libraries. Anyone know why?
+# We don't want these libraries.
+# Socket networking is in libc, these are not installed by default,
+# and just slow perl down. (scotth@sgi.com)
set `echo X "$libswanted "|sed -e 's/ socket / /' -e 's/ nsl / /' -e 's/ dl / /'`
shift
libswanted="$*"
# you need is in libc. You do also need '-lbsd' if you choose not
# to use the -D_BSD_* defines. Note that as of 6.2 the only
# difference between '-lmalloc' and '-lc' malloc is the debugging
-# and control calls. -- scotth@sgi.com
+# and control calls, which aren't used by perl. -- scotth@sgi.com
-set `echo X "$libswanted "|sed -e 's/ sun / /' -e 's/ crypt / /' -e 's/ bsd / /' -e 's/ PW / /'`
+set `echo X "$libswanted "|sed -e 's/ sun / /' -e 's/ crypt / /' -e 's/ bsd / /' -e 's/ PW / /' -e 's/ malloc / /'`
shift
libswanted="$*"
+
+# This script UU/usethreads.cbu will get 'called-back' by Configure
+# after it has prompted the user for whether to use threads.
+cat > UU/usethreads.cbu <<'EOCBU'
+case "$usethreads" in
+$define|true|[yY]*)
+ if test ! -f ${TOOLROOT}/usr/include/pthread.h -o ! -f /usr/lib/libpthread.so; then
+ case "`uname -r`" in
+ [1-5].*|6.[01])
+ cat >&4 <<EOM
+IRIX `uname -r` does not support POSIX threads.
+You should upgrade to at least IRIX 6.2 with pthread patches.
+EOM
+ ;;
+ 6.2)
+ cat >&4 <<EOM
+IRIX 6.2 can have the POSIX threads.
+However, the following IRIX patches (or their replacements) MUST be installed:
+ 1404 Irix 6.2 Posix 1003.1b man pages
+ 1645 IRIX 6.2 & 6.3 POSIX header file updates
+ 2000 Irix 6.2 Posix 1003.1b support modules
+ 2254 Pthread library fixes
+ 2401 6.2 all platform kernel rollup
+IMPORTANT:
+ Without patch 2401, a kernel bug in IRIX 6.2 will
+ cause your machine to panic and crash when running
+ threaded perl. IRIX 6.3 and up should be OK.
+EOM
+ ;;
+ [67].*)
+ cat >&4 <<EOM
+IRIX `uname -r` should have the POSIX threads.
+But, somehow, you do not seem to have them installed.
+EOM
+ ;;
+ esac
+ cat >&4 <<EOM
+Cannot continue, aborting.
+EOM
+ exit 1
+ fi
+ set `echo X "$libswanted "| sed -e 's/ c / pthread /'`
+ ld="${cc:-cc}"
+ shift
+ libswanted="$*"
+
+ usemymalloc='n'
+ ;;
+esac
+EOCBU
+
+# The -n32 makes off_t to be 8 bytes, so we should have largefileness.
+
+# This script UU/use64bits.cbu will get 'called-back' by Configure
+# after it has prompted the user for whether to use 64 bits.
+cat > UU/use64bits.cbu <<'EOCBU'
+case "$use64bits" in
+$define|true|[yY]*)
+ case "`uname -r`" in
+ [1-5]*|6.[01])
+ cat >&4 <<EOM
+IRIX `uname -r` does not support 64-bit types.
+You should upgrade to at least IRIX 6.2.
+Cannot continue, aborting.
+EOM
+ exit 1
+ ;;
+ esac
+ case "$cc $ccflags" in
+ *-n32*)
+ case "$ccflags" in
+ *-DUSE_LONG_LONG) ;;
+ *) ccflags="$ccflags -DUSE_LONG_LONG" ;;
+ esac
+ archname64="-n32"
+ ;;
+ esac
+ ;;
+esac
+EOCBU