# Distinguish between MC68020, MC68030, MC68040
# Don't assume every OS != 10 is < 10, (e.g., 11).
# From: Chuck Phillips <cdp@fc.hp.com>
+# HP-UX 10 pthreads hints: Matthew T Harden <mthard@mthard1.monsanto.com>
# This version: August 15, 1997
# Current maintainer: Jeff Okamoto <okamoto@corp.hp.com>
# "ext.libs" file which is *probably* messing up the order. Often,
# you can replace ext.libs with an empty file to fix the problem.
#
-# If you get a message about "too much defining", you might have to
-# add the following to your ccflags: '-Wp,-H256000'
+# If you get a message about "too much defining", as may happen
+# in HPUX < 10, you might have to append a single entry to your
+# ccflags: '-Wp,-H256000'
+# NOTE: This is a single entry (-W takes the argument 'p,-H256000').
#--------------------------------------------------------------------
# Turn on the _HPUX_SOURCE flag to get many of the HP add-ons
# reading from a NULL pointer causes a SEGV.
ccflags="$ccflags -D_HPUX_SOURCE"
-# If you plan to use gcc, then you should uncomment the following line
-# so you get the HP math library and not the GCC math library.
-# ccflags="$ccflags -L/lib/pa1.1"
-
# Check if you're using the bundled C compiler. This compiler doesn't support
# ANSI C (the -Aa flag) nor can it produce shared libraries. Thus we have
# to turn off dynamic loading.
esac
else
ccflags="$ccflags -Aa" # The add-on compiler supports ANSI C
+ # cppstdin and cpprun need the -Aa option if you use the unbundled
+ # ANSI C compiler (*not* the bundled K&R compiler or gcc)
+ # [XXX this should be set automatically by Configure, but isn't yet.]
+ # [XXX This is reported not to work. You may have to edit config.sh.
+ # After running Configure, set cpprun and cppstdin in config.sh,
+ # run "Configure -S" and then "make".]
+ cpprun="${cc:-cc} -E -Aa"
+ cppstdin="$cpprun"
+ cppminus='-'
+ cpplast='-'
fi
# For HP's ANSI C compiler, up to "+O3" is safe for everything
# except shared libraries (PIC code). Max safe for PIC is "+O2".
;;
esac
+# Even if you use gcc, prefer the HP math library over the GNU one.
+
+case "`$cc -v 2>&1`" in
+"*gcc*" ) test -d /lib/pa1.1 && ccflags="$ccflags -L/lib/pa1.1" ;;
+esac
+
# Determine the architecture type of this system.
# Keep leading tab below -- Configure Black Magic -- RAM, 03/02/97
xxOsRevMajor=`uname -r | sed -e 's/^[^0-9]*//' | cut -d. -f1`;
selecttype='int *'
fi
-
# Remove bad libraries that will cause problems
# (This doesn't remove libraries that don't actually exist)
# -lld is unneeded (and I can't figure out what it's used for anyway)
'') prefix='/opt/perl5' ;;
esac
+# HP-UX can't do setuid emulation offered by Configure
+case "$d_dosuid" in
+'') d_dosuid="$undef" ;;
+esac
+
# Date: Fri, 6 Sep 96 23:15:31 CDT
# From: "Daniel S. Lewart" <d-lewart@uiuc.edu>
# I looked through the gcc.info and found this:
# assembler of the form:
# (warning) Use of GR3 when frame >= 8192 may cause conflict.
# These warnings are harmless and can be safely ignored.
+
+# This script UU/usethreads.cbu will get 'called-back' by Configure
+# after it has prompted the user for whether to use threads.
+cat > UU/usethreads.cbu <<'EOCBU'
+case "$usethreads" in
+$define|true|[yY]*)
+ if [ "$xxOsRevMajor" -lt 10 ]; then
+ cat <<EOM >&4
+HP-UX $xxOsRevMajor cannot support POSIX threads.
+Consider upgrading to at least HP-UX 11.
+Cannot continue, aborting.
+EOM
+ exit 1
+ fi
+ case "$xxOsRevMajor" in
+ 10)
+ # Under 10.X, a threaded perl can be built, but it needs
+ # libcma and OLD_PTHREADS_API. Also <pthread.h> needs to
+ # be #included before any other includes (in perl.h)
+ if [ ! -f /usr/include/pthread.h -o ! -f /usr/lib/libcma.sl ]; then
+ cat <<EOM >&4
+In HP-UX 10.X for POSIX threads you need both of the files
+/usr/include/pthread.h and /usr/lib/libcma.sl.
+Either you must install the CMA package or you must upgrade to HP-UX 11.
+Cannot continue, aborting.
+EOM
+ exit 1
+ fi
+
+ # HP-UX 10.X uses the old pthreads API
+ case "$d_oldpthreads" in
+ '') d_oldpthreads="$define" ;;
+ esac
+
+ # include libcma before all the others
+ libswanted="cma $libswanted"
+
+ # tell perl.h to include <pthread.h> before other include files
+ ccflags="$ccflags -DPTHREAD_H_FIRST"
+
+ # CMA redefines select to cma_select, and cma_select expects int *
+ # instead of fd_set * (just like 9.X)
+ selecttype='int *'
+ ;;
+ 11 | 12) # 12 may want upping the _POSIX_C_SOURCE datestamp...
+ ccflags=" -D_POSIX_C_SOURCE=199506L $ccflags"
+ set `echo X "$libswanted "| sed -e 's/ c / pthread c /'`
+ shift
+ libswanted="$*"
+ ;;
+ esac
+ usemymalloc='n'
+ ;;
+esac
+EOCBU
+
+# This script UU/use64bits.cbu will get 'called-back' by Configure
+# after it has prompted the user for whether to use 64 bits.
+cat > UU/use64bits.cbu <<'EOCBU'
+case "$use64bits" in
+$define|true|[yY]*)
+ if [ "$xxOsRevMajor" -lt 11 ]; then
+ cat <<EOM >&4
+64-bit compilation is not supported on HP-UX $xxOsRevMajor.
+You need at least HP-UX 11.0.
+Cannot continue, aborting.
+EOM
+ exit 1
+ fi
+ if [ ! -d /lib/pa20_64 ]; then
+ cat <<EOM >&4
+You do not seem to have the 64-bit libraries, /lib/pa20_64.
+Cannot continue, aborting.
+EOM
+ exit 1
+ fi
+ ccflags="$ccflags +DD64 -D_FILE_OFFSET_BITS=64"
+ ldflags="$ldflags +DD64"
+ ld=/usr/bin/ld
+ set `echo " $libswanted " | sed -e 's@ dl @ @'`
+ libswanted="$*"
+ glibpth="/lib/pa20_64"
+esac
+EOCBU