-echo " "
-echo "NOTE: regression test op.read may fail due to an NFS bug in HP/UX."
-echo "If so, don't worry about it."
-case `(uname -r) 2>/dev/null` in
-*3.1*) d_syscall=$undef ;;
-*2.1*) libswanted=`echo $libswanted | sed 's/ malloc / /'` ;;
+# hints/hpux.sh
+# Perl Configure hints file for Hewlett Packard HP/UX 9.x and 10.x
+# This file is based on
+# hints/hpux_9.sh, Perl Configure hints file for Hewlett Packard HP/UX 9.x
+# Use Configure -Dcc=gcc to use gcc.
+# From: Jeff Okamoto <okamoto@hpcc123.corp.hp.com>
+# Date: Thu, 28 Sep 95 11:06:07 PDT
+# and
+# hints/hpux_10.sh, Perl Configure hints file for Hewlett Packard HP/UX 10.x
+# From: Giles Lean <giles@nemeton.com.au>
+# Date: Tue, 27 Jun 1995 08:17:45 +1000
+
+# Use Configure -Dcc=gcc to use gcc.
+# Use Configure -Dprefix=/usr/local to install in /usr/local.
+
+# Some users have reported problems with dynamic loading if the
+# environment variable LDOPTS='-a archive' .
+
+# Turn on the _HPUX_SOURCE flag to get many of the HP add-ons
+ccflags="$ccflags -D_HPUX_SOURCE"
+ldflags="$ldflags"
+
+# Check if you're using the bundled C compiler. This compiler doesn't support
+# ANSI C (the -Aa flag) nor can it produce shared libraries. Thus we have
+# to turn off dynamic loading.
+case "$cc" in
+'') if cc $ccflags -Aa 2>&1 | $contains 'option' >/dev/null
+ then
+ case "$usedl" in
+ '') usedl="$undef"
+ cat <<'EOM'
+
+The bundled C compiler can not produce shared libraries, so you will
+not be able to use dynamic loading.
+
+EOM
+ ;;
+ esac
+ else
+ ccflags="$ccflags -Aa" # The add-on compiler supports ANSI C
+ fi
+ optimize='-O'
+ ;;
+esac
+
+# Determine the architecture type of this system.
+xxuname=`uname -r`
+if echo $xxuname | $contains '10'
+then
+ # This system is running 10.0
+ xxcontext=`grep $(printf %#x $(getconf CPU_VERSION)) /usr/include/sys/unistd.h`
+ if echo "$xxcontext" | $contains 'PA-RISC1.1'
+ then
+ archname='PA-RISC1.1'
+ elif echo "$xxcontext" | $contains 'PA-RISC1.0'
+ then
+ archname='PA-RISC1.0'
+ elif echo "$xxcontext" | $contains 'PA-RISC2'
+ then
+ archname='PA-RISC2'
+ else
+ echo "This 10.0 system is of a PA-RISC type I don't recognize."
+ echo "Debugging output: $xxcontext"
+ archname=''
+ fi
+else
+ # This system is not running 10.0
+ xxcontext=`/bin/getcontext`
+ if echo "$xxcontext" | $contains 'PA-RISC1.1'
+ then
+ archname='PA-RISC1.1'
+ elif echo "$xxcontext" | $contains 'PA-RISC1.0'
+ then
+ archname='PA-RISC1.0'
+ elif echo "$xxcontext" | $contains 'HP-MC'
+ then
+ archname='HP-MC68K'
+ else
+ echo "I cannot recognize what chip set this system is using."
+ echo "Debugging output: $xxcontext"
+ archname=''
+ fi
+fi
+
+# Remove bad libraries that will cause problems
+# (This doesn't remove libraries that don't actually exist)
+# -lld is unneeded (and I can't figure out what it's used for anyway)
+# -ldbm is obsolete and should not be used
+# -lBSD contains BSD-style duplicates of SVR4 routines that cause confusion
+# -lPW is obsolete and should not be used
+# The libraries crypt, malloc, ndir, and net are empty.
+# Although -lndbm should be included, it will make perl blow up if you should
+# copy the binary to a system without libndbm.sl. See ccdlflags below.
+set `echo " $libswanted " | sed -e 's@ ld @ @' -e 's@ dbm @ @' -e 's@ BSD @ @' -e 's@ PW @ @'`
+libswanted="$*"
+
+# By setting the deferred flag below, this means that if you run perl on a
+# system that does not have the required shared library that you linked it
+# with, it will die when you try to access a symbol in the (missing) shared
+# library. If you would rather know at perl startup time that you are
+# missing an important shared library, switch the comments so that immediate,
+# rather than deferred loading is performed.
+# ccdlflags="-Wl,-E $ccdlflags"
+ccdlflags="-Wl,-E -Wl,-B,deferred $ccdlflags"
+
+usemymalloc='y'
+alignbytes=8
+selecttype='int *'
+
+# There are some lingering issues about whether g/setpgrp should be a part
+# of the perl core. This setting should cause perl to conform to the Principle
+# of Least Astonishment. The best thing is to use the g/setpgrp in the POSIX
+# module.
+d_bsdpgrp='define'
+
+# If your compile complains about FLT_MIN, uncomment the next line
+# POSIX_cflags='ccflags="$ccflags -DFLT_MIN=1.17549435E-38"'
+
+# Comment this out if you don't want to follow the SVR4 filesystem layout
+# that HP-UX 10.0 uses
+case "$prefix" in
+'') prefix='/opt/perl5' ;;
esac
-d_index=define
projects / p5sagit/p5-mst-13.2.git / blobdiff