-echo " "
-echo "NOTE: regression test op.read may fail due to an NFS bug in HP/UX."
-echo "If so, don't worry about it."
-case `(uname -r) 2>/dev/null` in
-*3.1*) d_syscall=$undef ;;
-*2.1*) libswanted=`echo $libswanted | sed 's/ malloc / /'` ;;
+#! /local/gnu/bin/bash
+# hints/hpux.sh
+# Perl Configure hints file for Hewlett Packard HP-UX 9.x and 10.x
+# This file is based on
+# hints/hpux_9.sh, Perl Configure hints file for Hewlett Packard HP-UX 9.x
+# Use Configure -Dcc=gcc to use gcc.
+# From: Jeff Okamoto <okamoto@corp.hp.com>
+# and
+# hints/hpux_10.sh, Perl Configure hints file for Hewlett Packard HP-UX 10.x
+# From: Giles Lean <giles@nemeton.com.au>
+
+# This version: March 21, 1997
+# Current maintainer: Jeff Okamoto <okamoto@corp.hp.com>
+
+#--------------------------------------------------------------------
+# Use Configure -Dcc=gcc to use gcc.
+# Use Configure -Dprefix=/usr/local to install in /usr/local.
+#
+# Some users have reported problems with dynamic loading if the
+# environment variable LDOPTS='-a archive' .
+#
+# If you get a message about "too much defining", you might have to
+# add the following to your ccflags: '-Wp,-H256000'
+#--------------------------------------------------------------------
+
+# Turn on the _HPUX_SOURCE flag to get many of the HP add-ons
+ccflags="$ccflags -D_HPUX_SOURCE"
+
+# If you plan to use gcc, then you should uncomment the following line
+# so you get the HP math library and not the GCC math library.
+# ccflags="$ccflags -L/lib/pa1.1"
+
+# Check if you're using the bundled C compiler. This compiler doesn't support
+# ANSI C (the -Aa flag) nor can it produce shared libraries. Thus we have
+# to turn off dynamic loading.
+case "$cc" in
+'') if cc $ccflags -Aa 2>&1 | $contains 'option' >/dev/null
+ then
+ case "$usedl" in
+ '') usedl="$undef"
+ cat <<'EOM' >&4
+
+The bundled C compiler can not produce shared libraries, so you will
+not be able to use dynamic loading.
+
+EOM
+ ;;
+ esac
+ else
+ ccflags="$ccflags -Aa" # The add-on compiler supports ANSI C
+ fi
+ optimize='-O'
+ ;;
esac
-d_index=define
+
+# Determine the architecture type of this system.
+# Keep leading tab below -- Configure Black Magic -- RAM, 03/02/97
+ xxuname=`uname -r`
+if echo $xxuname | $contains '10' >/dev/null 2>&1
+then
+ # This system is running 10.0
+ xxcpu1=`getconf CPU_VERSION`
+ xxcpu2=`printf %#x ${xxcpu1}`
+ xxcontext=`grep "$xxcpu2" /usr/include/sys/unistd.h`
+ if echo "$xxcontext" | $contains 'PA-RISC1.1' >/dev/null 2>&1
+ then
+ archname='PA-RISC1.1'
+ elif echo "$xxcontext" | $contains 'PA-RISC1.0' >/dev/null 2>&1
+ then
+ archname='PA-RISC1.0'
+ elif echo "$xxcontext" | $contains 'PA-RISC2' >/dev/null 2>&1
+ then
+ archname='PA-RISC2'
+ else
+ echo "This 10.0 system is of a PA-RISC type I don't recognize." >&2
+ echo "Debugging output: $xxcontext"
+ archname=''
+ fi
+else
+ # This system is not running 10.0
+ xxcontext=`/bin/getcontext`
+ if echo "$xxcontext" | $contains 'PA-RISC1.1' >/dev/null 2>&1
+ then
+ archname='PA-RISC1.1'
+ elif echo "$xxcontext" | $contains 'PA-RISC1.0' >/dev/null 2>&1
+ then
+ archname='PA-RISC1.0'
+ elif echo "$xxcontext" | $contains 'HP-MC' >/dev/null 2>&1
+ then
+ archname='HP-MC68K'
+ else
+ echo "I cannot recognize what chip set this system is using." >&2
+ echo "Debugging output: $xxcontext"
+ archname=''
+ fi
+fi
+
+# Remove bad libraries that will cause problems
+# (This doesn't remove libraries that don't actually exist)
+# -lld is unneeded (and I can't figure out what it's used for anyway)
+# -ldbm is obsolete and should not be used
+# -lBSD contains BSD-style duplicates of SVR4 routines that cause confusion
+# -lPW is obsolete and should not be used
+# The libraries crypt, malloc, ndir, and net are empty.
+# Although -lndbm should be included, it will make perl blow up if you should
+# copy the binary to a system without libndbm.sl. See ccdlflags below.
+set `echo " $libswanted " | sed -e 's@ ld @ @' -e 's@ dbm @ @' -e 's@ BSD @ @' -e 's@ PW @ @'`
+libswanted="$*"
+
+# By setting the deferred flag below, this means that if you run perl on a
+# system that does not have the required shared library that you linked it
+# with, it will die when you try to access a symbol in the (missing) shared
+# library. If you would rather know at perl startup time that you are
+# missing an important shared library, switch the comments so that immediate,
+# rather than deferred loading is performed.
+# ccdlflags="-Wl,-E $ccdlflags"
+ccdlflags="-Wl,-E -Wl,-B,deferred $ccdlflags"
+
+usemymalloc='y'
+alignbytes=8
+selecttype='int *'
+
+# When HP-UX runs a script with "#!", it sets argv[0] to the script name.
+toke_cflags='ccflags="$ccflags -DARG_ZERO_IS_SCRIPT"'
+
+# If your compile complains about FLT_MIN, uncomment the next line
+# POSIX_cflags='ccflags="$ccflags -DFLT_MIN=1.17549435E-38"'
+
+# Comment this out if you don't want to follow the SVR4 filesystem layout
+# that HP-UX 10.0 uses
+case "$prefix" in
+'') prefix='/opt/perl5.003' ;;
+esac
+
+# Date: Fri, 6 Sep 96 23:15:31 CDT
+# From: "Daniel S. Lewart" <d-lewart@uiuc.edu>
+# I looked through the gcc.info and found this:
+# * GNU CC compiled code sometimes emits warnings from the HP-UX
+# assembler of the form:
+# (warning) Use of GR3 when frame >= 8192 may cause conflict.
+# These warnings are harmless and can be safely ignored.
projects / p5sagit/p5-mst-13.2.git / blobdiff