-# hints/bsdi_bsdos.sh
+# hints/bsdos.sh
#
# hints file for BSD/OS 2.x (adapted from bsd386.sh)
# Original by Neil Bowers <neilb@khoros.unm.edu>
# Tue Oct 4 12:01:34 EDT 1994
# Updated by Tony Sanders <sanders@bsdi.com>
-# Mon Mar 13 12:17:24 CST 1995
+# Mon Nov 27 17:25:51 CST 1995
#
# You can override the compiler and loader on the Configure command line:
-# ./Configure -Dcc=gcc -Dld=ld
+# ./Configure -Dcc=shlicc2 -Dld=shlicc2
# filename extension for shared library objects
so='o'
-d_voidsig='define'
+# Don't use this for Perl 5.002, which needs parallel sig_name and sig_num lists
+#sig_name='ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM URG STOP TSTP CONT CHLD TTIN TTOU IO XCPU XFSZ VTALRM PROF WINCH INFO USR1 USR2 '
signal_t='void'
+d_voidsig='define'
-# If Configure's signal detection fails, uncomment this line.
-# sig_name='ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM URG STOP TSTP CONT CHLD TTIN TTOU IO XCPU XFSZ VTALRM PROF WINCH INFO USR1 USR2 '
-
-d_dosuid='define'
-
-# we don't want to use -lnm, since exp() is busted in there (in 1.1 anyway)
+# we don't want to use -lnm, since exp() is busted (in 1.1 anyway)
set `echo X "$libswanted "| sed -e 's/ nm / /'`
shift
libswanted="$*"
-# Avoid telldir prototype conflict in pp_sys.c (BSD/386 uses const DIR *)
+# BSD/OS X libraries are in their own tree
+glibpth="$glibpth /usr/X11/lib"
+ldflags="$ldflags -L/usr/X11/lib"
+
+# Avoid telldir prototype conflict in pp_sys.c
pp_sys_cflags='ccflags="$ccflags -DHAS_TELLDIR_PROTOTYPE"'
+case "$bsdos_distribution" in
+defined)
+ d_portable='no'
+ prefix='/usr/contrib'
+ man3dir='/usr/contrib/man/man3'
+ ;;
+esac
+
case "$osvers" in
1.0*)
# Avoid problems with HUGE_VAL in POSIX in 1.0's cc.
POSIX_cflags='ccflags="$ccflags -UHUGE_VAL"'
;;
1.1*)
- # Use gcc2 (2.5.8) if available in 1.1.
+ # Use gcc2
case "$cc" in
- '') cc=gcc2 ;;
+ '') cc='gcc2' ;;
esac
;;
-2.*)
- # Use 2.X's gcc2
+2.0*)
+ # default to GCC 2.X w/shared libraries
case "$cc" in
- '') cc=gcc2 ;;
+ '') cc='shlicc2' ;;
esac
- # Link with shared libraries in 2.X
+ # default ld to shared library linker
case "$ld" in
- '') ld='shlicc' ;;
+ '') ld='shlicc2' ;;
esac
# setre?[ug]id() have been replaced by the _POSIX_SAVED_IDS stuff
d_setrgid='undef'
d_setruid='undef'
;;
+2.1*)
+ # Use 2.1's shlicc2 for dynamic linking
+ # Since cc -o is linking, use it for compiling too.
+ # I'm not sure whether Configure is careful about
+ # distinguishing between the two.
+
+ case "$cc" in
+ '') cc='shlicc2'
+ cccdlflags=' ' ;; # Avoid the dreaded -fpic
+ esac
+
+ # Link with shared libraries in 2.1
+ # Turns out that shlicc2 will automatically use the
+ # shared libs, so don't explicitly specify -lc_s.2.1.*
+ case "$ld" in
+ '') ld='shlicc2'
+ lddlflags='-r' ;; # this one is necessary
+ esac
+
+ # setre?[ug]id() have been replaced by the _POSIX_SAVED_IDS stuff
+ # in 4.4BSD-based systems (including BSD/OS 2.0 and later).
+ # See http://www.bsdi.com/bsdi-man?setuid(2)
+ # This stuff may or may not be right, but it works.
+ d_setregid='undef'
+ d_setreuid='undef'
+ d_setrgid='undef'
+ d_setruid='undef'
+
+ # based on the 5.001m hints file from BSD/OS source disk
+ # (this is needed for pTk to work)
+
+ # BSD/OS 2.1 doesn't (yet) support true dynamic linking.
+ # So we "preload' the shared libraries by linking against
+ # them, even though we don't pull in any symbols thereby.
+ libswanted="Xpm Xaw Xmu Xt SM ICE Xext X11 $libswanted"
+ libswanted="rpc curses termcap $libswanted"
+
+ ;;
+3.0*)
+ # adapted from 2.1 entry by Christopher Davis <ckd@kei.com
+ # Use 3.0's shlicc2 for dynamic linking
+ # Since cc -o is linking, use it for compiling too.
+ # I'm not sure whether Configure is careful about
+ # distinguishing between the two.
+
+ case "$cc" in
+ '') cc='shlicc2'
+ cccdlflags=' ' ;; # Avoid the dreaded -fpic
+ esac
+
+ # Link with shared libraries in 3.0
+ # Turns out that shlicc2 will automatically use the
+ # shared libs, so don't explicitly specify them
+ case "$ld" in
+ '') ld='shlicc2'
+ lddlflags='-r' ;; # this one is necessary
+ esac
+
+ # setre?[ug]id() have been replaced by the _POSIX_SAVED_IDS stuff
+ # in 4.4BSD-based systems (including BSD/OS 2.0 and later).
+ # See http://www.bsdi.com/bsdi-man?setuid(2)
+ # This stuff may or may not be right, but it works.
+ d_setregid='undef'
+ d_setreuid='undef'
+ d_setrgid='undef'
+ d_setruid='undef'
+
+ # this may still be needed for Tk and such
+ # BSD/OS doesn't (yet) support true dynamic linking.
+ # So we "preload' the shared libraries by linking against
+ # them, even though we don't pull in any symbols thereby.
+ libswanted="Xpm Xaw Xmu Xt SM ICE Xext X11 $libswanted"
+ libswanted="rpc curses termcap $libswanted"
+
+ # the IPC stuff doesn't work the way perl expects
+ d_msg='undef'
+ d_msgctl='undef'
+ d_msgget='undef'
+ d_msgrcv='undef'
+ d_msgsnd='undef'
+ d_sem='undef'
+ d_semctl='undef'
+ d_semget='undef'
+ d_semop='undef'
+ d_shm='undef'
+ d_shmat='undef'
+ d_shmatprototype='undef'
+ d_shmctl='undef'
+ d_shmdt='undef'
+ d_shmget='undef'
+
+ # use system malloc instead of perl's
+ d_mymalloc='undef'
+ i_malloc='undef'
+ usemymalloc='n'
+
+ ;;
esac
projects / p5sagit/p5-mst-13.2.git / blobdiff