# DB_File.pm -- Perl 5 interface to Berkeley DB
#
-# written by Paul Marquess (pmarquess@bfsec.bt.co.uk)
-# last modified 28th June 1996
-# version 1.02
+# written by Paul Marquess (pmqs@cpan.org)
+# last modified 12th March 2005
+# version 1.811
+#
+# Copyright (c) 1995-2005 Paul Marquess. All rights reserved.
+# This program is free software; you can redistribute it and/or
+# modify it under the same terms as Perl itself.
+
package DB_File::HASHINFO ;
+require 5.00404;
+
+use warnings;
use strict;
use Carp;
require Tie::Hash;
bless \%x, $pkg ;
}
+
sub TIEHASH
{
my $pkg = shift ;
- bless { 'bsize' => undef,
- 'ffactor' => undef,
- 'nelem' => undef,
- 'cachesize' => undef,
- 'hash' => undef,
- 'lorder' => undef,
- }, $pkg ;
+ bless { VALID => {
+ bsize => 1,
+ ffactor => 1,
+ nelem => 1,
+ cachesize => 1,
+ hash => 2,
+ lorder => 1,
+ },
+ GOT => {}
+ }, $pkg ;
}
+
sub FETCH
{
my $self = shift ;
my $key = shift ;
- return $self->{$key} if exists $self->{$key} ;
+ return $self->{GOT}{$key} if exists $self->{VALID}{$key} ;
my $pkg = ref $self ;
croak "${pkg}::FETCH - Unknown element '$key'" ;
my $key = shift ;
my $value = shift ;
- if ( exists $self->{$key} )
+ my $type = $self->{VALID}{$key};
+
+ if ( $type )
{
- $self->{$key} = $value ;
+ croak "Key '$key' not associated with a code reference"
+ if $type == 2 && !ref $value && ref $value ne 'CODE';
+ $self->{GOT}{$key} = $value ;
return ;
}
my $self = shift ;
my $key = shift ;
- if ( exists $self->{$key} )
+ if ( exists $self->{VALID}{$key} )
{
- delete $self->{$key} ;
+ delete $self->{GOT}{$key} ;
return ;
}
my $self = shift ;
my $key = shift ;
- exists $self->{$key} ;
+ exists $self->{VALID}{$key} ;
}
sub NotHere
{
- my $pkg = shift ;
+ my $self = shift ;
my $method = shift ;
- croak "${pkg} does not define the method ${method}" ;
+ croak ref($self) . " does not define the method ${method}" ;
}
-sub DESTROY { undef %{$_[0]} }
-sub FIRSTKEY { my $self = shift ; $self->NotHere(ref $self, "FIRSTKEY") }
-sub NEXTKEY { my $self = shift ; $self->NotHere(ref $self, "NEXTKEY") }
-sub CLEAR { my $self = shift ; $self->NotHere(ref $self, "CLEAR") }
+sub FIRSTKEY { my $self = shift ; $self->NotHere("FIRSTKEY") }
+sub NEXTKEY { my $self = shift ; $self->NotHere("NEXTKEY") }
+sub CLEAR { my $self = shift ; $self->NotHere("CLEAR") }
package DB_File::RECNOINFO ;
+use warnings;
use strict ;
@DB_File::RECNOINFO::ISA = qw(DB_File::HASHINFO) ;
{
my $pkg = shift ;
- bless { 'bval' => undef,
- 'cachesize' => undef,
- 'psize' => undef,
- 'flags' => undef,
- 'lorder' => undef,
- 'reclen' => undef,
- 'bfname' => "",
- }, $pkg ;
+ bless { VALID => { map {$_, 1}
+ qw( bval cachesize psize flags lorder reclen bfname )
+ },
+ GOT => {},
+ }, $pkg ;
}
package DB_File::BTREEINFO ;
+use warnings;
use strict ;
@DB_File::BTREEINFO::ISA = qw(DB_File::HASHINFO) ;
{
my $pkg = shift ;
- bless { 'flags' => undef,
- 'cachesize' => undef,
- 'maxkeypage' => undef,
- 'minkeypage' => undef,
- 'psize' => undef,
- 'compare' => undef,
- 'prefix' => undef,
- 'lorder' => undef,
- }, $pkg ;
+ bless { VALID => {
+ flags => 1,
+ cachesize => 1,
+ maxkeypage => 1,
+ minkeypage => 1,
+ psize => 1,
+ compare => 2,
+ prefix => 2,
+ lorder => 1,
+ },
+ GOT => {},
+ }, $pkg ;
}
package DB_File ;
+use warnings;
use strict;
-use vars qw($VERSION @ISA @EXPORT $AUTOLOAD $DB_BTREE $DB_HASH $DB_RECNO) ;
+our ($VERSION, @ISA, @EXPORT, $AUTOLOAD, $DB_BTREE, $DB_HASH, $DB_RECNO);
+our ($db_version, $use_XSLoader, $splice_end_array);
use Carp;
-$VERSION = "1.02" ;
+$VERSION = "1.811" ;
-#typedef enum { DB_BTREE, DB_HASH, DB_RECNO } DBTYPE;
-#$DB_BTREE = TIEHASH DB_File::BTREEINFO ;
-#$DB_HASH = TIEHASH DB_File::HASHINFO ;
-#$DB_RECNO = TIEHASH DB_File::RECNOINFO ;
+{
+ local $SIG{__WARN__} = sub {$splice_end_array = "@_";};
+ my @a =(1); splice(@a, 3);
+ $splice_end_array =
+ ($splice_end_array =~ /^splice\(\) offset past end of array at /);
+}
+#typedef enum { DB_BTREE, DB_HASH, DB_RECNO } DBTYPE;
$DB_BTREE = new DB_File::BTREEINFO ;
$DB_HASH = new DB_File::HASHINFO ;
$DB_RECNO = new DB_File::RECNOINFO ;
require Tie::Hash;
require Exporter;
use AutoLoader;
-require DynaLoader;
-@ISA = qw(Tie::Hash Exporter DynaLoader);
+BEGIN {
+ $use_XSLoader = 1 ;
+ { local $SIG{__DIE__} ; eval { require XSLoader } ; }
+
+ if ($@) {
+ $use_XSLoader = 0 ;
+ require DynaLoader;
+ @ISA = qw(DynaLoader);
+ }
+}
+
+push @ISA, qw(Tie::Hash Exporter);
@EXPORT = qw(
$DB_BTREE $DB_HASH $DB_RECNO
sub AUTOLOAD {
my($constname);
($constname = $AUTOLOAD) =~ s/.*:://;
- my $val = constant($constname, @_ ? $_[0] : 0);
- if ($! != 0) {
- if ($! =~ /Invalid/) {
- $AutoLoader::AUTOLOAD = $AUTOLOAD;
- goto &AutoLoader::AUTOLOAD;
+ my ($error, $val) = constant($constname);
+ Carp::croak $error if $error;
+ no strict 'refs';
+ *{$AUTOLOAD} = sub { $val };
+ goto &{$AUTOLOAD};
+}
+
+
+eval {
+ # Make all Fcntl O_XXX constants available for importing
+ require Fcntl;
+ my @O = grep /^O_/, @Fcntl::EXPORT;
+ Fcntl->import(@O); # first we import what we want to export
+ push(@EXPORT, @O);
+};
+
+if ($use_XSLoader)
+ { XSLoader::load("DB_File", $VERSION)}
+else
+ { bootstrap DB_File $VERSION }
+
+# Preloaded methods go here. Autoload methods go after __END__, and are
+# processed by the autosplit program.
+
+sub tie_hash_or_array
+{
+ my (@arg) = @_ ;
+ my $tieHASH = ( (caller(1))[3] =~ /TIEHASH/ ) ;
+
+ $arg[4] = tied %{ $arg[4] }
+ if @arg >= 5 && ref $arg[4] && $arg[4] =~ /=HASH/ && tied %{ $arg[4] } ;
+
+ $arg[2] = O_CREAT()|O_RDWR() if @arg >=3 && ! defined $arg[2];
+ $arg[3] = 0666 if @arg >=4 && ! defined $arg[3];
+
+ # make recno in Berkeley DB version 2 (or better) work like
+ # recno in version 1.
+ if ($db_version > 1 and defined $arg[4] and $arg[4] =~ /RECNO/ and
+ $arg[1] and ! -e $arg[1]) {
+ open(FH, ">$arg[1]") or return undef ;
+ close FH ;
+ chmod $arg[3] ? $arg[3] : 0666 , $arg[1] ;
+ }
+
+ DoTie_($tieHASH, @arg) ;
+}
+
+sub TIEHASH
+{
+ tie_hash_or_array(@_) ;
+}
+
+sub TIEARRAY
+{
+ tie_hash_or_array(@_) ;
+}
+
+sub CLEAR
+{
+ my $self = shift;
+ my $key = 0 ;
+ my $value = "" ;
+ my $status = $self->seq($key, $value, R_FIRST());
+ my @keys;
+
+ while ($status == 0) {
+ push @keys, $key;
+ $status = $self->seq($key, $value, R_NEXT());
+ }
+ foreach $key (reverse @keys) {
+ my $s = $self->del($key);
+ }
+}
+
+sub EXTEND { }
+
+sub STORESIZE
+{
+ my $self = shift;
+ my $length = shift ;
+ my $current_length = $self->length() ;
+
+ if ($length < $current_length) {
+ my $key ;
+ for ($key = $current_length - 1 ; $key >= $length ; -- $key)
+ { $self->del($key) }
+ }
+ elsif ($length > $current_length) {
+ $self->put($length-1, "") ;
+ }
+}
+
+
+sub SPLICE
+{
+ my $self = shift;
+ my $offset = shift;
+ if (not defined $offset) {
+ warnings::warnif('uninitialized', 'Use of uninitialized value in splice');
+ $offset = 0;
+ }
+
+ my $length = @_ ? shift : 0;
+ # Carping about definedness comes _after_ the OFFSET sanity check.
+ # This is so we get the same error messages as Perl's splice().
+ #
+
+ my @list = @_;
+
+ my $size = $self->FETCHSIZE();
+
+ # 'If OFFSET is negative then it start that far from the end of
+ # the array.'
+ #
+ if ($offset < 0) {
+ my $new_offset = $size + $offset;
+ if ($new_offset < 0) {
+ die "Modification of non-creatable array value attempted, "
+ . "subscript $offset";
+ }
+ $offset = $new_offset;
+ }
+
+ if (not defined $length) {
+ warnings::warnif('uninitialized', 'Use of uninitialized value in splice');
+ $length = 0;
+ }
+
+ if ($offset > $size) {
+ $offset = $size;
+ warnings::warnif('misc', 'splice() offset past end of array')
+ if $splice_end_array;
+ }
+
+ # 'If LENGTH is omitted, removes everything from OFFSET onward.'
+ if (not defined $length) {
+ $length = $size - $offset;
+ }
+
+ # 'If LENGTH is negative, leave that many elements off the end of
+ # the array.'
+ #
+ if ($length < 0) {
+ $length = $size - $offset + $length;
+
+ if ($length < 0) {
+ # The user must have specified a length bigger than the
+ # length of the array passed in. But perl's splice()
+ # doesn't catch this, it just behaves as for length=0.
+ #
+ $length = 0;
+ }
+ }
+
+ if ($length > $size - $offset) {
+ $length = $size - $offset;
+ }
+
+ # $num_elems holds the current number of elements in the database.
+ my $num_elems = $size;
+
+ # 'Removes the elements designated by OFFSET and LENGTH from an
+ # array,'...
+ #
+ my @removed = ();
+ foreach (0 .. $length - 1) {
+ my $old;
+ my $status = $self->get($offset, $old);
+ if ($status != 0) {
+ my $msg = "error from Berkeley DB on get($offset, \$old)";
+ if ($status == 1) {
+ $msg .= ' (no such element?)';
+ }
+ else {
+ $msg .= ": error status $status";
+ if (defined $! and $! ne '') {
+ $msg .= ", message $!";
+ }
+ }
+ die $msg;
+ }
+ push @removed, $old;
+
+ $status = $self->del($offset);
+ if ($status != 0) {
+ my $msg = "error from Berkeley DB on del($offset)";
+ if ($status == 1) {
+ $msg .= ' (no such element?)';
+ }
+ else {
+ $msg .= ": error status $status";
+ if (defined $! and $! ne '') {
+ $msg .= ", message $!";
+ }
+ }
+ die $msg;
+ }
+
+ -- $num_elems;
+ }
+
+ # ...'and replaces them with the elements of LIST, if any.'
+ my $pos = $offset;
+ while (defined (my $elem = shift @list)) {
+ my $old_pos = $pos;
+ my $status;
+ if ($pos >= $num_elems) {
+ $status = $self->put($pos, $elem);
+ }
+ else {
+ $status = $self->put($pos, $elem, $self->R_IBEFORE);
+ }
+
+ if ($status != 0) {
+ my $msg = "error from Berkeley DB on put($pos, $elem, ...)";
+ if ($status == 1) {
+ $msg .= ' (no such element?)';
+ }
+ else {
+ $msg .= ", error status $status";
+ if (defined $! and $! ne '') {
+ $msg .= ", message $!";
+ }
+ }
+ die $msg;
+ }
+
+ die "pos unexpectedly changed from $old_pos to $pos with R_IBEFORE"
+ if $old_pos != $pos;
+
+ ++ $pos;
+ ++ $num_elems;
+ }
+
+ if (wantarray) {
+ # 'In list context, returns the elements removed from the
+ # array.'
+ #
+ return @removed;
+ }
+ elsif (defined wantarray and not wantarray) {
+ # 'In scalar context, returns the last element removed, or
+ # undef if no elements are removed.'
+ #
+ if (@removed) {
+ my $last = pop @removed;
+ return "$last";
}
else {
- my($pack,$file,$line) = caller;
- croak "Your vendor has not defined DB macro $constname, used at $file line $line.
-";
+ return undef;
}
}
- eval "sub $AUTOLOAD { $val }";
- goto &$AUTOLOAD;
+ elsif (not defined wantarray) {
+ # Void context
+ }
+ else { die }
}
+sub ::DB_File::splice { &SPLICE }
-bootstrap DB_File $VERSION;
+sub find_dup
+{
+ croak "Usage: \$db->find_dup(key,value)\n"
+ unless @_ == 3 ;
+
+ my $db = shift ;
+ my ($origkey, $value_wanted) = @_ ;
+ my ($key, $value) = ($origkey, 0);
+ my ($status) = 0 ;
-# Preloaded methods go here. Autoload methods go after __END__, and are
-# processed by the autosplit program.
+ for ($status = $db->seq($key, $value, R_CURSOR() ) ;
+ $status == 0 ;
+ $status = $db->seq($key, $value, R_NEXT() ) ) {
+
+ return 0 if $key eq $origkey and $value eq $value_wanted ;
+ }
+
+ return $status ;
+}
+
+sub del_dup
+{
+ croak "Usage: \$db->del_dup(key,value)\n"
+ unless @_ == 3 ;
+
+ my $db = shift ;
+ my ($key, $value) = @_ ;
+ my ($status) = $db->find_dup($key, $value) ;
+ return $status if $status != 0 ;
+ $status = $db->del($key, R_CURSOR() ) ;
+ return $status ;
+}
sub get_dup
{
my $db = shift ;
my $key = shift ;
my $flag = shift ;
- my $value ;
+ my $value = 0 ;
my $origkey = $key ;
my $wantarray = wantarray ;
+ my %values = () ;
my @values = () ;
my $counter = 0 ;
+ my $status = 0 ;
- # get the first value associated with the key, $key
- $db->seq($key, $value, R_CURSOR()) ;
-
- if ( $key eq $origkey) {
+ # iterate through the database until either EOF ($status == 0)
+ # or a different key is encountered ($key ne $origkey).
+ for ($status = $db->seq($key, $value, R_CURSOR()) ;
+ $status == 0 and $key eq $origkey ;
+ $status = $db->seq($key, $value, R_NEXT()) ) {
- while (1) {
- # save the value or count matches
- if ($wantarray)
- { push (@values, $value) ; push(@values, 1) if $flag }
- else
- { ++ $counter }
+ # save the value or count number of matches
+ if ($wantarray) {
+ if ($flag)
+ { ++ $values{$value} }
+ else
+ { push (@values, $value) }
+ }
+ else
+ { ++ $counter }
- # iterate through the database until either EOF
- # or a different key is encountered.
- last if $db->seq($key, $value, R_NEXT()) != 0 or $key ne $origkey ;
- }
}
- $wantarray ? @values : $counter ;
+ return ($wantarray ? ($flag ? %values : @values) : $counter) ;
}
1;
__END__
-=cut
-
=head1 NAME
-DB_File - Perl5 access to Berkeley DB
+DB_File - Perl5 access to Berkeley DB version 1.x
=head1 SYNOPSIS
- use DB_File ;
- use Fcntl ;
-
+ use DB_File;
+
[$X =] tie %hash, 'DB_File', [$filename, $flags, $mode, $DB_HASH] ;
[$X =] tie %hash, 'DB_File', $filename, $flags, $mode, $DB_BTREE ;
[$X =] tie @array, 'DB_File', $filename, $flags, $mode, $DB_RECNO ;
$status = $X->sync([$flags]) ;
$status = $X->fd ;
+ # BTREE only
$count = $X->get_dup($key) ;
@list = $X->get_dup($key) ;
%list = $X->get_dup($key, 1) ;
+ $status = $X->find_dup($key, $value) ;
+ $status = $X->del_dup($key, $value) ;
+
+ # RECNO only
+ $a = $X->length;
+ $a = $X->pop ;
+ $X->push(list);
+ $a = $X->shift;
+ $X->unshift(list);
+ @r = $X->splice(offset, length, elements);
+
+ # DBM Filters
+ $old_filter = $db->filter_store_key ( sub { ... } ) ;
+ $old_filter = $db->filter_store_value( sub { ... } ) ;
+ $old_filter = $db->filter_fetch_key ( sub { ... } ) ;
+ $old_filter = $db->filter_fetch_value( sub { ... } ) ;
untie %hash ;
untie @array ;
=head1 DESCRIPTION
B<DB_File> is a module which allows Perl programs to make use of the
-facilities provided by Berkeley DB. If you intend to use this
-module you should really have a copy of the Berkeley DB manual page at
-hand. The interface defined here mirrors the Berkeley DB interface
-closely.
+facilities provided by Berkeley DB version 1.x (if you have a newer
+version of DB, see L<Using DB_File with Berkeley DB version 2 or greater>).
+It is assumed that you have a copy of the Berkeley DB manual pages at
+hand when reading this documentation. The interface defined here
+mirrors the Berkeley DB interface closely.
Berkeley DB is a C library which provides a consistent interface to a
number of database formats. B<DB_File> provides an interface to all
=back
-=head2 How does DB_File interface to Berkeley DB?
+=head2 Using DB_File with Berkeley DB version 2 or greater
+
+Although B<DB_File> is intended to be used with Berkeley DB version 1,
+it can also be used with version 2, 3 or 4. In this case the interface is
+limited to the functionality provided by Berkeley DB 1.x. Anywhere the
+version 2 or greater interface differs, B<DB_File> arranges for it to work
+like version 1. This feature allows B<DB_File> scripts that were built
+with version 1 to be migrated to version 2 or greater without any changes.
+
+If you want to make use of the new features available in Berkeley DB
+2.x or greater, use the Perl module B<BerkeleyDB> instead.
+
+B<Note:> The database file format has changed multiple times in Berkeley
+DB version 2, 3 and 4. If you cannot recreate your databases, you
+must dump any existing databases with either the C<db_dump> or the
+C<db_dump185> utility that comes with Berkeley DB.
+Once you have rebuilt DB_File to use Berkeley DB version 2 or greater,
+your databases can be recreated using C<db_load>. Refer to the Berkeley DB
+documentation for further details.
+
+Please read L<"COPYRIGHT"> before using version 2.x or greater of Berkeley
+DB with DB_File.
+
+=head2 Interface to Berkeley DB
B<DB_File> allows access to Berkeley DB files using the tie() mechanism
in Perl 5 (for full details, see L<perlfunc/tie()>). This facility
In addition to the tie() interface, it is also possible to access most
of the functions provided in the Berkeley DB API directly.
-See L<"Using the Berkeley DB API Directly">.
+See L<THE API INTERFACE>.
=head2 Opening a Berkeley DB Database File
Berkeley DB uses the function dbopen() to open or create a database.
-Below is the C prototype for dbopen().
+Here is the C prototype for dbopen():
DB*
dbopen (const char * file, int flags, int mode,
The values stored in the hashes above are mostly the direct equivalent
of their C counterpart. Like their C counterparts, all are set to a
-default set of values - that means you don't have to set I<all> of the
+default values - that means you don't have to set I<all> of the
values when you only want to change one. Here is an example:
$a = new DB_File::HASHINFO ;
$a->{'cachesize'} = 12345 ;
tie %y, 'DB_File', "filename", $flags, 0777, $a ;
-A few of the values need extra discussion here. When used, the C
+A few of the options need extra discussion here. When used, the C
equivalent of the keys C<hash>, C<compare> and C<prefix> store pointers
to C functions. In B<DB_File> these keys are used to store references
to Perl subs. Below are templates for each of the subs:
return $bytes ;
}
-See L<"Using BTREE"> for an example of using the C<compare>
+See L<Changing the BTREE sort order> for an example of using the
+C<compare> template.
+
+If you are using the DB_RECNO interface and you intend making use of
+C<bval>, you should check out L<The 'bval' Option>.
=head2 Default Parameters
is equivalent to:
- tie %A, "DB_File", "filename", O_CREAT|O_RDWR, 0640, $DB_HASH ;
+ tie %A, "DB_File", "filename", O_CREAT|O_RDWR, 0666, $DB_HASH ;
It is also possible to omit the filename parameter as well, so the
call:
is equivalent to:
- tie %A, "DB_File", undef, O_CREAT|O_RDWR, 0640, $DB_HASH ;
+ tie %A, "DB_File", undef, O_CREAT|O_RDWR, 0666, $DB_HASH ;
-See L<"In Memory Databases"> for a discussion on the use of C<undef>
+See L<In Memory Databases> for a discussion on the use of C<undef>
in place of a filename.
-=head2 Handling duplicate keys in BTREE databases
+=head2 In Memory Databases
+
+Berkeley DB allows the creation of in-memory databases by using NULL
+(that is, a C<(char *)0> in C) in place of the filename. B<DB_File>
+uses C<undef> instead of NULL to provide this functionality.
+
+=head1 DB_HASH
+
+The DB_HASH file format is probably the most commonly used of the three
+file formats that B<DB_File> supports. It is also very straightforward
+to use.
+
+=head2 A Simple Example
+
+This example shows how to create a database, add key/value pairs to the
+database, delete keys/value pairs and finally how to enumerate the
+contents of the database.
+
+ use warnings ;
+ use strict ;
+ use DB_File ;
+ our (%h, $k, $v) ;
+
+ unlink "fruit" ;
+ tie %h, "DB_File", "fruit", O_RDWR|O_CREAT, 0666, $DB_HASH
+ or die "Cannot open file 'fruit': $!\n";
+
+ # Add a few key/value pairs to the file
+ $h{"apple"} = "red" ;
+ $h{"orange"} = "orange" ;
+ $h{"banana"} = "yellow" ;
+ $h{"tomato"} = "red" ;
+
+ # Check for existence of a key
+ print "Banana Exists\n\n" if $h{"banana"} ;
+
+ # Delete a key/value pair.
+ delete $h{"apple"} ;
-The BTREE file type in Berkeley DB optionally allows a single key to be
-associated with an arbitrary number of values. This option is enabled by
-setting the flags element of C<$DB_BTREE> to R_DUP when creating the
+ # print the contents of the file
+ while (($k, $v) = each %h)
+ { print "$k -> $v\n" }
+
+ untie %h ;
+
+here is the output:
+
+ Banana Exists
+
+ orange -> orange
+ tomato -> red
+ banana -> yellow
+
+Note that the like ordinary associative arrays, the order of the keys
+retrieved is in an apparently random order.
+
+=head1 DB_BTREE
+
+The DB_BTREE format is useful when you want to store data in a given
+order. By default the keys will be stored in lexical order, but as you
+will see from the example shown in the next section, it is very easy to
+define your own sorting function.
+
+=head2 Changing the BTREE sort order
+
+This script shows how to override the default sorting algorithm that
+BTREE uses. Instead of using the normal lexical ordering, a case
+insensitive compare function will be used.
+
+ use warnings ;
+ use strict ;
+ use DB_File ;
+
+ my %h ;
+
+ sub Compare
+ {
+ my ($key1, $key2) = @_ ;
+ "\L$key1" cmp "\L$key2" ;
+ }
+
+ # specify the Perl sub that will do the comparison
+ $DB_BTREE->{'compare'} = \&Compare ;
+
+ unlink "tree" ;
+ tie %h, "DB_File", "tree", O_RDWR|O_CREAT, 0666, $DB_BTREE
+ or die "Cannot open file 'tree': $!\n" ;
+
+ # Add a key/value pair to the file
+ $h{'Wall'} = 'Larry' ;
+ $h{'Smith'} = 'John' ;
+ $h{'mouse'} = 'mickey' ;
+ $h{'duck'} = 'donald' ;
+
+ # Delete
+ delete $h{"duck"} ;
+
+ # Cycle through the keys printing them in order.
+ # Note it is not necessary to sort the keys as
+ # the btree will have kept them in order automatically.
+ foreach (keys %h)
+ { print "$_\n" }
+
+ untie %h ;
+
+Here is the output from the code above.
+
+ mouse
+ Smith
+ Wall
+
+There are a few point to bear in mind if you want to change the
+ordering in a BTREE database:
+
+=over 5
+
+=item 1.
+
+The new compare function must be specified when you create the database.
+
+=item 2.
+
+You cannot change the ordering once the database has been created. Thus
+you must use the same compare function every time you access the
database.
+=item 3
+
+Duplicate keys are entirely defined by the comparison function.
+In the case-insensitive example above, the keys: 'KEY' and 'key'
+would be considered duplicates, and assigning to the second one
+would overwrite the first. If duplicates are allowed for (with the
+R_DUP flag discussed below), only a single copy of duplicate keys
+is stored in the database --- so (again with example above) assigning
+three values to the keys: 'KEY', 'Key', and 'key' would leave just
+the first key: 'KEY' in the database with three values. For some
+situations this results in information loss, so care should be taken
+to provide fully qualified comparison functions when necessary.
+For example, the above comparison routine could be modified to
+additionally compare case-sensitively if two keys are equal in the
+case insensitive comparison:
+
+ sub compare {
+ my($key1, $key2) = @_;
+ lc $key1 cmp lc $key2 ||
+ $key1 cmp $key2;
+ }
+
+And now you will only have duplicates when the keys themselves
+are truly the same. (note: in versions of the db library prior to
+about November 1996, such duplicate keys were retained so it was
+possible to recover the original keys in sets of keys that
+compared as equal).
+
+
+=back
+
+=head2 Handling Duplicate Keys
+
+The BTREE file type optionally allows a single key to be associated
+with an arbitrary number of values. This option is enabled by setting
+the flags element of C<$DB_BTREE> to R_DUP when creating the database.
+
There are some difficulties in using the tied hash interface if you
want to manipulate a BTREE database with duplicate keys. Consider this
code:
+ use warnings ;
+ use strict ;
use DB_File ;
- use Fcntl ;
-
+
+ my ($filename, %h) ;
+
$filename = "tree" ;
unlink $filename ;
-
+
# Enable duplicate records
$DB_BTREE->{'flags'} = R_DUP ;
-
- tie %h, "DB_File", $filename, O_RDWR|O_CREAT, 0640, $DB_BTREE
+
+ tie %h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_BTREE
or die "Cannot open $filename: $!\n";
-
+
# Add some key/value pairs to the file
$h{'Wall'} = 'Larry' ;
$h{'Wall'} = 'Brick' ; # Note the duplicate key
+ $h{'Wall'} = 'Brick' ; # Note the duplicate key and value
$h{'Smith'} = 'John' ;
$h{'mouse'} = 'mickey' ;
# iterate through the associative array
# and print each key/value pair.
- foreach (keys %h)
+ foreach (sort keys %h)
{ print "$_ -> $h{$_}\n" }
+ untie %h ;
+
Here is the output:
Smith -> John
Wall -> Larry
Wall -> Larry
+ Wall -> Larry
mouse -> mickey
-As you can see 2 records have been successfully created with key C<Wall>
+As you can see 3 records have been successfully created with key C<Wall>
- the only thing is, when they are retrieved from the database they
-both I<seem> to have the same value, namely C<Larry>. The problem is
-caused by the way that the associative array interface works.
-Basically, when the associative array interface is used to fetch the
-value associated with a given key, it will only ever retrieve the first
-value.
+I<seem> to have the same value, namely C<Larry>. The problem is caused
+by the way that the associative array interface works. Basically, when
+the associative array interface is used to fetch the value associated
+with a given key, it will only ever retrieve the first value.
Although it may not be immediately obvious from the code above, the
associative array interface can be used to write values with duplicate
The way to get around this problem is to use the Berkeley DB API method
called C<seq>. This method allows sequential access to key/value
-pairs. See L<"Using the Berkeley DB API Directly"> for details of both
-the C<seq> method and the API in general.
+pairs. See L<THE API INTERFACE> for details of both the C<seq> method
+and the API in general.
Here is the script above rewritten using the C<seq> API method.
+ use warnings ;
+ use strict ;
use DB_File ;
- use Fcntl ;
-
+
+ my ($filename, $x, %h, $status, $key, $value) ;
+
$filename = "tree" ;
unlink $filename ;
-
+
# Enable duplicate records
$DB_BTREE->{'flags'} = R_DUP ;
-
- $x = tie %h, "DB_File", $filename, O_RDWR|O_CREAT, 0640, $DB_BTREE
+
+ $x = tie %h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_BTREE
or die "Cannot open $filename: $!\n";
-
+
# Add some key/value pairs to the file
$h{'Wall'} = 'Larry' ;
$h{'Wall'} = 'Brick' ; # Note the duplicate key
+ $h{'Wall'} = 'Brick' ; # Note the duplicate key and value
$h{'Smith'} = 'John' ;
$h{'mouse'} = 'mickey' ;
-
- # Point to the first record in the btree
- $x->seq($key, $value, R_FIRST) ;
- # now iterate through the rest of the btree
+ # iterate through the btree using seq
# and print each key/value pair.
- print "$key -> $value\n" ;
- while ( $x->seq($key, $value, R_NEXT) == 0)
+ $key = $value = 0 ;
+ for ($status = $x->seq($key, $value, R_FIRST) ;
+ $status == 0 ;
+ $status = $x->seq($key, $value, R_NEXT) )
{ print "$key -> $value\n" }
-
+
undef $x ;
untie %h ;
Smith -> John
Wall -> Brick
+ Wall -> Brick
Wall -> Larry
mouse -> mickey
-This time we have got all the key/value pairs, including both the
+This time we have got all the key/value pairs, including the multiple
values associated with the key C<Wall>.
-C<DB_File> comes with a utility method, called C<get_dup>, to assist in
+To make life easier when dealing with duplicate keys, B<DB_File> comes with
+a few utility methods.
+
+=head2 The get_dup() Method
+
+The C<get_dup> method assists in
reading duplicate values from BTREE databases. The method can take the
following forms:
with the key, C<$key>.
In list context, it returns all the values which match C<$key>. Note
-that the values returned will be in an apparently random order.
+that the values will be returned in an apparently random order.
-If the second parameter is present and evaluates TRUE, the method
-returns an associative array whose keys correspond to the the values
-from the BTREE and whose values are all C<1>.
+In list context, if the second parameter is present and evaluates
+TRUE, the method returns an associative array. The keys of the
+associative array correspond to the values that matched in the BTREE
+and the values of the array are a count of the number of times that
+particular value occurred in the BTREE.
-So assuming the database created above, we can use C<get_dups> like
+So assuming the database created above, we can use C<get_dup> like
this:
- $cnt = $x->get_dups("Wall") ;
+ use warnings ;
+ use strict ;
+ use DB_File ;
+
+ my ($filename, $x, %h) ;
+
+ $filename = "tree" ;
+
+ # Enable duplicate records
+ $DB_BTREE->{'flags'} = R_DUP ;
+
+ $x = tie %h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_BTREE
+ or die "Cannot open $filename: $!\n";
+
+ my $cnt = $x->get_dup("Wall") ;
print "Wall occurred $cnt times\n" ;
- %hash = $x->get_dups("Wall", 1) ;
+ my %hash = $x->get_dup("Wall", 1) ;
print "Larry is there\n" if $hash{'Larry'} ;
+ print "There are $hash{'Brick'} Brick Walls\n" ;
- @list = $x->get_dups("Wall") ;
+ my @list = sort $x->get_dup("Wall") ;
print "Wall => [@list]\n" ;
- @list = $x->get_dups("Smith") ;
+ @list = $x->get_dup("Smith") ;
print "Smith => [@list]\n" ;
-
- @list = $x->get_dups("Dog") ;
+
+ @list = $x->get_dup("Dog") ;
print "Dog => [@list]\n" ;
and it will print:
- Wall occurred 2 times
+ Wall occurred 3 times
Larry is there
- Wall => [Brick Larry]
+ There are 2 Brick Walls
+ Wall => [Brick Brick Larry]
Smith => [John]
Dog => []
-=head2 RECNO
+=head2 The find_dup() Method
+
+ $status = $X->find_dup($key, $value) ;
+
+This method checks for the existence of a specific key/value pair. If the
+pair exists, the cursor is left pointing to the pair and the method
+returns 0. Otherwise the method returns a non-zero value.
+
+Assuming the database from the previous example:
+
+ use warnings ;
+ use strict ;
+ use DB_File ;
+
+ my ($filename, $x, %h, $found) ;
+
+ $filename = "tree" ;
+
+ # Enable duplicate records
+ $DB_BTREE->{'flags'} = R_DUP ;
+
+ $x = tie %h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_BTREE
+ or die "Cannot open $filename: $!\n";
+
+ $found = ( $x->find_dup("Wall", "Larry") == 0 ? "" : "not") ;
+ print "Larry Wall is $found there\n" ;
+
+ $found = ( $x->find_dup("Wall", "Harry") == 0 ? "" : "not") ;
+ print "Harry Wall is $found there\n" ;
+
+ undef $x ;
+ untie %h ;
+
+prints this
+
+ Larry Wall is there
+ Harry Wall is not there
+
+
+=head2 The del_dup() Method
+
+ $status = $X->del_dup($key, $value) ;
+
+This method deletes a specific key/value pair. It returns
+0 if they exist and have been deleted successfully.
+Otherwise the method returns a non-zero value.
+
+Again assuming the existence of the C<tree> database
+
+ use warnings ;
+ use strict ;
+ use DB_File ;
+
+ my ($filename, $x, %h, $found) ;
+
+ $filename = "tree" ;
+
+ # Enable duplicate records
+ $DB_BTREE->{'flags'} = R_DUP ;
-In order to make RECNO more compatible with Perl the array offset for
+ $x = tie %h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_BTREE
+ or die "Cannot open $filename: $!\n";
+
+ $x->del_dup("Wall", "Larry") ;
+
+ $found = ( $x->find_dup("Wall", "Larry") == 0 ? "" : "not") ;
+ print "Larry Wall is $found there\n" ;
+
+ undef $x ;
+ untie %h ;
+
+prints this
+
+ Larry Wall is not there
+
+=head2 Matching Partial Keys
+
+The BTREE interface has a feature which allows partial keys to be
+matched. This functionality is I<only> available when the C<seq> method
+is used along with the R_CURSOR flag.
+
+ $x->seq($key, $value, R_CURSOR) ;
+
+Here is the relevant quote from the dbopen man page where it defines
+the use of the R_CURSOR flag with seq:
+
+ Note, for the DB_BTREE access method, the returned key is not
+ necessarily an exact match for the specified key. The returned key
+ is the smallest key greater than or equal to the specified key,
+ permitting partial key matches and range searches.
+
+In the example script below, the C<match> sub uses this feature to find
+and print the first matching key/value pair given a partial key.
+
+ use warnings ;
+ use strict ;
+ use DB_File ;
+ use Fcntl ;
+
+ my ($filename, $x, %h, $st, $key, $value) ;
+
+ sub match
+ {
+ my $key = shift ;
+ my $value = 0;
+ my $orig_key = $key ;
+ $x->seq($key, $value, R_CURSOR) ;
+ print "$orig_key\t-> $key\t-> $value\n" ;
+ }
+
+ $filename = "tree" ;
+ unlink $filename ;
+
+ $x = tie %h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_BTREE
+ or die "Cannot open $filename: $!\n";
+
+ # Add some key/value pairs to the file
+ $h{'mouse'} = 'mickey' ;
+ $h{'Wall'} = 'Larry' ;
+ $h{'Walls'} = 'Brick' ;
+ $h{'Smith'} = 'John' ;
+
+
+ $key = $value = 0 ;
+ print "IN ORDER\n" ;
+ for ($st = $x->seq($key, $value, R_FIRST) ;
+ $st == 0 ;
+ $st = $x->seq($key, $value, R_NEXT) )
+
+ { print "$key -> $value\n" }
+
+ print "\nPARTIAL MATCH\n" ;
+
+ match "Wa" ;
+ match "A" ;
+ match "a" ;
+
+ undef $x ;
+ untie %h ;
+
+Here is the output:
+
+ IN ORDER
+ Smith -> John
+ Wall -> Larry
+ Walls -> Brick
+ mouse -> mickey
+
+ PARTIAL MATCH
+ Wa -> Wall -> Larry
+ A -> Smith -> John
+ a -> mouse -> mickey
+
+=head1 DB_RECNO
+
+DB_RECNO provides an interface to flat text files. Both variable and
+fixed length records are supported.
+
+In order to make RECNO more compatible with Perl, the array offset for
all RECNO arrays begins at 0 rather than 1 as in Berkeley DB.
As with normal Perl arrays, a RECNO array can be accessed using
-2 the second last, and so on. Attempting to access an element before
the start of the array will raise a fatal run-time error.
-=head2 In Memory Databases
+=head2 The 'bval' Option
-Berkeley DB allows the creation of in-memory databases by using NULL
-(that is, a C<(char *)0> in C) in place of the filename. B<DB_File>
-uses C<undef> instead of NULL to provide this functionality.
+The operation of the bval option warrants some discussion. Here is the
+definition of bval from the Berkeley DB 1.85 recno manual page:
+
+ The delimiting byte to be used to mark the end of a
+ record for variable-length records, and the pad charac-
+ ter for fixed-length records. If no value is speci-
+ fied, newlines (``\n'') are used to mark the end of
+ variable-length records and fixed-length records are
+ padded with spaces.
+
+The second sentence is wrong. In actual fact bval will only default to
+C<"\n"> when the openinfo parameter in dbopen is NULL. If a non-NULL
+openinfo parameter is used at all, the value that happens to be in bval
+will be used. That means you always have to specify bval when making
+use of any of the options in the openinfo parameter. This documentation
+error will be fixed in the next release of Berkeley DB.
+
+That clarifies the situation with regards Berkeley DB itself. What
+about B<DB_File>? Well, the behavior defined in the quote above is
+quite useful, so B<DB_File> conforms to it.
+
+That means that you can specify other options (e.g. cachesize) and
+still have bval default to C<"\n"> for variable length records, and
+space for fixed length records.
+
+Also note that the bval option only allows you to specify a single byte
+as a delimiter.
+
+=head2 A Simple Example
+
+Here is a simple example that uses RECNO (if you are using a version
+of Perl earlier than 5.004_57 this example won't work -- see
+L<Extra RECNO Methods> for a workaround).
+
+ use warnings ;
+ use strict ;
+ use DB_File ;
+
+ my $filename = "text" ;
+ unlink $filename ;
+ my @h ;
+ tie @h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_RECNO
+ or die "Cannot open file 'text': $!\n" ;
-=head2 Using the Berkeley DB API Directly
+ # Add a few key/value pairs to the file
+ $h[0] = "orange" ;
+ $h[1] = "blue" ;
+ $h[2] = "yellow" ;
+
+ push @h, "green", "black" ;
+
+ my $elements = scalar @h ;
+ print "The array contains $elements entries\n" ;
+
+ my $last = pop @h ;
+ print "popped $last\n" ;
+
+ unshift @h, "white" ;
+ my $first = shift @h ;
+ print "shifted $first\n" ;
+
+ # Check for existence of a key
+ print "Element 1 Exists with value $h[1]\n" if $h[1] ;
+
+ # use a negative index
+ print "The last element is $h[-1]\n" ;
+ print "The 2nd last element is $h[-2]\n" ;
+
+ untie @h ;
+
+Here is the output from the script:
+
+ The array contains 5 entries
+ popped black
+ shifted white
+ Element 1 Exists with value blue
+ The last element is green
+ The 2nd last element is yellow
+
+=head2 Extra RECNO Methods
+
+If you are using a version of Perl earlier than 5.004_57, the tied
+array interface is quite limited. In the example script above
+C<push>, C<pop>, C<shift>, C<unshift>
+or determining the array length will not work with a tied array.
+
+To make the interface more useful for older versions of Perl, a number
+of methods are supplied with B<DB_File> to simulate the missing array
+operations. All these methods are accessed via the object returned from
+the tie call.
+
+Here are the methods:
+
+=over 5
+
+=item B<$X-E<gt>push(list) ;>
+
+Pushes the elements of C<list> to the end of the array.
+
+=item B<$value = $X-E<gt>pop ;>
+
+Removes and returns the last element of the array.
+
+=item B<$X-E<gt>shift>
+
+Removes and returns the first element of the array.
+
+=item B<$X-E<gt>unshift(list) ;>
+
+Pushes the elements of C<list> to the start of the array.
+
+=item B<$X-E<gt>length>
+
+Returns the number of elements in the array.
+
+=item B<$X-E<gt>splice(offset, length, elements);>
+
+Returns a splice of the array.
+
+=back
+
+=head2 Another Example
+
+Here is a more complete example that makes use of some of the methods
+described above. It also makes use of the API interface directly (see
+L<THE API INTERFACE>).
+
+ use warnings ;
+ use strict ;
+ my (@h, $H, $file, $i) ;
+ use DB_File ;
+ use Fcntl ;
+
+ $file = "text" ;
+
+ unlink $file ;
+
+ $H = tie @h, "DB_File", $file, O_RDWR|O_CREAT, 0666, $DB_RECNO
+ or die "Cannot open file $file: $!\n" ;
+
+ # first create a text file to play with
+ $h[0] = "zero" ;
+ $h[1] = "one" ;
+ $h[2] = "two" ;
+ $h[3] = "three" ;
+ $h[4] = "four" ;
+
+
+ # Print the records in order.
+ #
+ # The length method is needed here because evaluating a tied
+ # array in a scalar context does not return the number of
+ # elements in the array.
+
+ print "\nORIGINAL\n" ;
+ foreach $i (0 .. $H->length - 1) {
+ print "$i: $h[$i]\n" ;
+ }
+
+ # use the push & pop methods
+ $a = $H->pop ;
+ $H->push("last") ;
+ print "\nThe last record was [$a]\n" ;
+
+ # and the shift & unshift methods
+ $a = $H->shift ;
+ $H->unshift("first") ;
+ print "The first record was [$a]\n" ;
+
+ # Use the API to add a new record after record 2.
+ $i = 2 ;
+ $H->put($i, "Newbie", R_IAFTER) ;
+
+ # and a new record before record 1.
+ $i = 1 ;
+ $H->put($i, "New One", R_IBEFORE) ;
+
+ # delete record 3
+ $H->del(3) ;
+
+ # now print the records in reverse order
+ print "\nREVERSE\n" ;
+ for ($i = $H->length - 1 ; $i >= 0 ; -- $i)
+ { print "$i: $h[$i]\n" }
+
+ # same again, but use the API functions instead
+ print "\nREVERSE again\n" ;
+ my ($s, $k, $v) = (0, 0, 0) ;
+ for ($s = $H->seq($k, $v, R_LAST) ;
+ $s == 0 ;
+ $s = $H->seq($k, $v, R_PREV))
+ { print "$k: $v\n" }
+
+ undef $H ;
+ untie @h ;
+
+and this is what it outputs:
+
+ ORIGINAL
+ 0: zero
+ 1: one
+ 2: two
+ 3: three
+ 4: four
+
+ The last record was [four]
+ The first record was [zero]
+
+ REVERSE
+ 5: last
+ 4: three
+ 3: Newbie
+ 2: one
+ 1: New One
+ 0: first
+
+ REVERSE again
+ 5: last
+ 4: three
+ 3: Newbie
+ 2: one
+ 1: New One
+ 0: first
+
+Notes:
+
+=over 5
+
+=item 1.
+
+Rather than iterating through the array, C<@h> like this:
+
+ foreach $i (@h)
+
+it is necessary to use either this:
+
+ foreach $i (0 .. $H->length - 1)
+
+or this:
+
+ for ($a = $H->get($k, $v, R_FIRST) ;
+ $a == 0 ;
+ $a = $H->get($k, $v, R_NEXT) )
+
+=item 2.
+
+Notice that both times the C<put> method was used the record index was
+specified using a variable, C<$i>, rather than the literal value
+itself. This is because C<put> will return the record number of the
+inserted line via that parameter.
+
+=back
+
+=head1 THE API INTERFACE
As well as accessing Berkeley DB using a tied hash or array, it is also
possible to make direct use of most of the API functions defined in the
B<Important:> If you have saved a copy of the object returned from
C<tie>, the underlying database file will I<not> be closed until both
the tied variable is untied and all copies of the saved object are
-destroyed.
+destroyed.
use DB_File ;
$db = tie %hash, "DB_File", "filename"
undef $db ;
untie %hash ;
+See L<The untie() Gotcha> for more details.
+
All the functions defined in L<dbopen> are available except for
close() and dbopen() itself. The B<DB_File> method interface to the
supported functions have been implemented to mirror the way Berkeley DB
=over 5
-=item C<$status = $X-E<gt>get($key, $value [, $flags]) ;>
+=item B<$status = $X-E<gt>get($key, $value [, $flags]) ;>
Given a key (C<$key>) this method reads the value associated with it
from the database. The value read from the database is returned in the
No flags are currently defined for this method.
-=item C<$status = $X-E<gt>put($key, $value [, $flags]) ;>
+=item B<$status = $X-E<gt>put($key, $value [, $flags]) ;>
Stores the key/value pair in the database.
Valid flags are R_CURSOR, R_IAFTER, R_IBEFORE, R_NOOVERWRITE and
R_SETCURSOR.
-=item C<$status = $X-E<gt>del($key [, $flags]) ;>
+=item B<$status = $X-E<gt>del($key [, $flags]) ;>
Removes all key/value pairs with key C<$key> from the database.
R_CURSOR is the only valid flag at present.
-=item C<$status = $X-E<gt>fd ;>
+=item B<$status = $X-E<gt>fd ;>
Returns the file descriptor for the underlying database.
-See L<"Locking Databases"> for an example of how to make use of the
-C<fd> method to lock your database.
+See L<Locking: The Trouble with fd> for an explanation for why you should
+not use C<fd> to lock your database.
-=item C<$status = $X-E<gt>seq($key, $value, $flags) ;>
+=item B<$status = $X-E<gt>seq($key, $value, $flags) ;>
This interface allows sequential retrieval from the database. See
L<dbopen> for full details.
The flags parameter is mandatory. The valid flag values are R_CURSOR,
R_FIRST, R_LAST, R_NEXT and R_PREV.
-=item C<$status = $X-E<gt>sync([$flags]) ;>
+=item B<$status = $X-E<gt>sync([$flags]) ;>
Flushes any cached buffers to disk.
=back
-=head1 EXAMPLES
+=head1 DBM FILTERS
+
+A DBM Filter is a piece of code that is be used when you I<always>
+want to make the same transformation to all keys and/or values in a
+DBM database.
-It is always a lot easier to understand something when you see a real
-example. So here are a few.
+There are four methods associated with DBM Filters. All work identically,
+and each is used to install (or uninstall) a single DBM Filter. Each
+expects a single parameter, namely a reference to a sub. The only
+difference between them is the place that the filter is installed.
-=head2 Using HASH
+To summarise:
- use DB_File ;
- use Fcntl ;
+=over 5
- tie %h, "DB_File", "hashed", O_RDWR|O_CREAT, 0640, $DB_HASH
- or die "Cannot open file 'hashed': $!\n";
+=item B<filter_store_key>
- # Add a key/value pair to the file
- $h{"apple"} = "orange" ;
+If a filter has been installed with this method, it will be invoked
+every time you write a key to a DBM database.
- # Check for existence of a key
- print "Exists\n" if $h{"banana"} ;
+=item B<filter_store_value>
- # Delete
- delete $h{"apple"} ;
+If a filter has been installed with this method, it will be invoked
+every time you write a value to a DBM database.
- untie %h ;
-=head2 Using BTREE
+=item B<filter_fetch_key>
-Here is a sample of code which uses BTREE. Just to make life more
-interesting the default comparison function will not be used. Instead
-a Perl sub, C<Compare()>, will be used to do a case insensitive
-comparison.
+If a filter has been installed with this method, it will be invoked
+every time you read a key from a DBM database.
- use DB_File ;
- use Fcntl ;
+=item B<filter_fetch_value>
- sub Compare
- {
- my ($key1, $key2) = @_ ;
+If a filter has been installed with this method, it will be invoked
+every time you read a value from a DBM database.
- "\L$key1" cmp "\L$key2" ;
- }
+=back
- $DB_BTREE->{'compare'} = 'Compare' ;
+You can use any combination of the methods, from none, to all four.
- tie %h, "DB_File", "tree", O_RDWR|O_CREAT, 0640, $DB_BTREE
- or die "Cannot open file 'tree': $!\n" ;
+All filter methods return the existing filter, if present, or C<undef>
+in not.
- # Add a key/value pair to the file
- $h{'Wall'} = 'Larry' ;
- $h{'Smith'} = 'John' ;
- $h{'mouse'} = 'mickey' ;
- $h{'duck'} = 'donald' ;
+To delete a filter pass C<undef> to it.
- # Delete
- delete $h{"duck"} ;
+=head2 The Filter
- # Cycle through the keys printing them in order.
- # Note it is not necessary to sort the keys as
- # the btree will have kept them in order automatically.
- foreach (keys %h)
- { print "$_\n" }
+When each filter is called by Perl, a local copy of C<$_> will contain
+the key or value to be filtered. Filtering is achieved by modifying
+the contents of C<$_>. The return code from the filter is ignored.
- untie %h ;
+=head2 An Example -- the NULL termination problem.
-Here is the output from the code above.
+Consider the following scenario. You have a DBM database
+that you need to share with a third-party C application. The C application
+assumes that I<all> keys and values are NULL terminated. Unfortunately
+when Perl writes to DBM databases it doesn't use NULL termination, so
+your Perl application will have to manage NULL termination itself. When
+you write to the database you will have to use something like this:
- mouse
- Smith
- Wall
+ $hash{"$key\0"} = "$value\0" ;
+Similarly the NULL needs to be taken into account when you are considering
+the length of existing keys/values.
-=head2 Using RECNO
+It would be much better if you could ignore the NULL terminations issue
+in the main application code and have a mechanism that automatically
+added the terminating NULL to all keys and values whenever you write to
+the database and have them removed when you read from the database. As I'm
+sure you have already guessed, this is a problem that DBM Filters can
+fix very easily.
-Here is a simple example that uses RECNO.
+ use warnings ;
+ use strict ;
+ use DB_File ;
- use DB_File ;
- use Fcntl ;
+ my %hash ;
+ my $filename = "filt" ;
+ unlink $filename ;
- $DB_RECNO->{'psize'} = 3000 ;
+ my $db = tie %hash, 'DB_File', $filename, O_CREAT|O_RDWR, 0666, $DB_HASH
+ or die "Cannot open $filename: $!\n" ;
- tie @h, "DB_File", "text", O_RDWR|O_CREAT, 0640, $DB_RECNO
- or die "Cannot open file 'text': $!\n" ;
+ # Install DBM Filters
+ $db->filter_fetch_key ( sub { s/\0$// } ) ;
+ $db->filter_store_key ( sub { $_ .= "\0" } ) ;
+ $db->filter_fetch_value( sub { s/\0$// } ) ;
+ $db->filter_store_value( sub { $_ .= "\0" } ) ;
- # Add a key/value pair to the file
- $h[0] = "orange" ;
+ $hash{"abc"} = "def" ;
+ my $a = $hash{"ABC"} ;
+ # ...
+ undef $db ;
+ untie %hash ;
- # Check for existence of a key
- print "Exists\n" if $h[1] ;
+Hopefully the contents of each of the filters should be
+self-explanatory. Both "fetch" filters remove the terminating NULL,
+and both "store" filters add a terminating NULL.
- untie @h ;
-=head2 Locking Databases
+=head2 Another Example -- Key is a C int.
-Concurrent access of a read-write database by several parties requires
-them all to use some kind of locking. Here's an example of Tom's that
-uses the I<fd> method to get the file descriptor, and then a careful
-open() to give something Perl will flock() for you. Run this repeatedly
-in the background to watch the locks granted in proper order.
+Here is another real-life example. By default, whenever Perl writes to
+a DBM database it always writes the key and value as strings. So when
+you use this:
- use Fcntl;
- use DB_File;
+ $hash{12345} = "soemthing" ;
- use strict;
+the key 12345 will get stored in the DBM database as the 5 byte string
+"12345". If you actually want the key to be stored in the DBM database
+as a C int, you will have to use C<pack> when writing, and C<unpack>
+when reading.
- sub LOCK_SH { 1 }
- sub LOCK_EX { 2 }
- sub LOCK_NB { 4 }
- sub LOCK_UN { 8 }
+Here is a DBM Filter that does it:
- my($oldval, $fd, $db, %db, $value, $key);
+ use warnings ;
+ use strict ;
+ use DB_File ;
+ my %hash ;
+ my $filename = "filt" ;
+ unlink $filename ;
- $key = shift || 'default';
- $value = shift || 'magic';
- $value .= " $$";
+ my $db = tie %hash, 'DB_File', $filename, O_CREAT|O_RDWR, 0666, $DB_HASH
+ or die "Cannot open $filename: $!\n" ;
- $db = tie(%db, 'DB_File', '/tmp/foo.db', O_CREAT|O_RDWR, 0644)
- || die "dbcreat /tmp/foo.db $!";
- $fd = $db->fd;
- print "$$: db fd is $fd\n";
- open(DB_FH, "+<&=$fd") || die "dup $!";
+ $db->filter_fetch_key ( sub { $_ = unpack("i", $_) } ) ;
+ $db->filter_store_key ( sub { $_ = pack ("i", $_) } ) ;
+ $hash{123} = "def" ;
+ # ...
+ undef $db ;
+ untie %hash ;
+This time only two filters have been used -- we only need to manipulate
+the contents of the key, so it wasn't necessary to install any value
+filters.
- unless (flock (DB_FH, LOCK_SH | LOCK_NB)) {
- print "$$: CONTENTION; can't read during write update!
- Waiting for read lock ($!) ....";
- unless (flock (DB_FH, LOCK_SH)) { die "flock: $!" }
- }
- print "$$: Read lock granted\n";
+=head1 HINTS AND TIPS
- $oldval = $db{$key};
- print "$$: Old value was $oldval\n";
- flock(DB_FH, LOCK_UN);
- unless (flock (DB_FH, LOCK_EX | LOCK_NB)) {
- print "$$: CONTENTION; must have exclusive lock!
- Waiting for write lock ($!) ....";
- unless (flock (DB_FH, LOCK_EX)) { die "flock: $!" }
- }
+=head2 Locking: The Trouble with fd
- print "$$: Write lock granted\n";
- $db{$key} = $value;
- $db->sync;
- sleep 10;
+Until version 1.72 of this module, the recommended technique for locking
+B<DB_File> databases was to flock the filehandle returned from the "fd"
+function. Unfortunately this technique has been shown to be fundamentally
+flawed (Kudos to David Harris for tracking this down). Use it at your own
+peril!
+The locking technique went like this.
+
+ $db = tie(%db, 'DB_File', 'foo.db', O_CREAT|O_RDWR, 0644)
+ || die "dbcreat foo.db $!";
+ $fd = $db->fd;
+ open(DB_FH, "+<&=$fd") || die "dup $!";
+ flock (DB_FH, LOCK_EX) || die "flock: $!";
+ ...
+ $db{"Tom"} = "Jerry" ;
+ ...
flock(DB_FH, LOCK_UN);
undef $db;
untie %db;
close(DB_FH);
- print "$$: Updated db to $key=$value\n";
-=head1 HISTORY
+In simple terms, this is what happens:
+
+=over 5
+
+=item 1.
+
+Use "tie" to open the database.
+
+=item 2.
+
+Lock the database with fd & flock.
+
+=item 3.
+
+Read & Write to the database.
+
+=item 4.
-=over
+Unlock and close the database.
-=item 0.1
+=back
+
+Here is the crux of the problem. A side-effect of opening the B<DB_File>
+database in step 2 is that an initial block from the database will get
+read from disk and cached in memory.
+
+To see why this is a problem, consider what can happen when two processes,
+say "A" and "B", both want to update the same B<DB_File> database
+using the locking steps outlined above. Assume process "A" has already
+opened the database and has a write lock, but it hasn't actually updated
+the database yet (it has finished step 2, but not started step 3 yet). Now
+process "B" tries to open the same database - step 1 will succeed,
+but it will block on step 2 until process "A" releases the lock. The
+important thing to notice here is that at this point in time both
+processes will have cached identical initial blocks from the database.
+
+Now process "A" updates the database and happens to change some of the
+data held in the initial buffer. Process "A" terminates, flushing
+all cached data to disk and releasing the database lock. At this point
+the database on disk will correctly reflect the changes made by process
+"A".
+
+With the lock released, process "B" can now continue. It also updates the
+database and unfortunately it too modifies the data that was in its
+initial buffer. Once that data gets flushed to disk it will overwrite
+some/all of the changes process "A" made to the database.
+
+The result of this scenario is at best a database that doesn't contain
+what you expect. At worst the database will corrupt.
+
+The above won't happen every time competing process update the same
+B<DB_File> database, but it does illustrate why the technique should
+not be used.
+
+=head2 Safe ways to lock a database
+
+Starting with version 2.x, Berkeley DB has internal support for locking.
+The companion module to this one, B<BerkeleyDB>, provides an interface
+to this locking functionality. If you are serious about locking
+Berkeley DB databases, I strongly recommend using B<BerkeleyDB>.
+
+If using B<BerkeleyDB> isn't an option, there are a number of modules
+available on CPAN that can be used to implement locking. Each one
+implements locking differently and has different goals in mind. It is
+therefore worth knowing the difference, so that you can pick the right
+one for your application. Here are the three locking wrappers:
+
+=over 5
+
+=item B<Tie::DB_Lock>
+
+A B<DB_File> wrapper which creates copies of the database file for
+read access, so that you have a kind of a multiversioning concurrent read
+system. However, updates are still serial. Use for databases where reads
+may be lengthy and consistency problems may occur.
+
+=item B<Tie::DB_LockFile>
+
+A B<DB_File> wrapper that has the ability to lock and unlock the database
+while it is being used. Avoids the tie-before-flock problem by simply
+re-tie-ing the database when you get or drop a lock. Because of the
+flexibility in dropping and re-acquiring the lock in the middle of a
+session, this can be massaged into a system that will work with long
+updates and/or reads if the application follows the hints in the POD
+documentation.
+
+=item B<DB_File::Lock>
+
+An extremely lightweight B<DB_File> wrapper that simply flocks a lockfile
+before tie-ing the database and drops the lock after the untie. Allows
+one to use the same lockfile for multiple databases to avoid deadlock
+problems, if desired. Use for databases where updates are reads are
+quick and simple flock locking semantics are enough.
+
+=back
+
+=head2 Sharing Databases With C Applications
+
+There is no technical reason why a Berkeley DB database cannot be
+shared by both a Perl and a C application.
+
+The vast majority of problems that are reported in this area boil down
+to the fact that C strings are NULL terminated, whilst Perl strings are
+not. See L<DBM FILTERS> for a generic way to work around this problem.
-First Release.
+Here is a real example. Netscape 2.0 keeps a record of the locations you
+visit along with the time you last visited them in a DB_HASH database.
+This is usually stored in the file F<~/.netscape/history.db>. The key
+field in the database is the location string and the value field is the
+time the location was last visited stored as a 4 byte binary value.
-=item 0.2
+If you haven't already guessed, the location string is stored with a
+terminating NULL. This means you need to be careful when accessing the
+database.
+
+Here is a snippet of code that is loosely based on Tom Christiansen's
+I<ggh> script (available from your nearest CPAN archive in
+F<authors/id/TOMC/scripts/nshist.gz>).
+
+ use warnings ;
+ use strict ;
+ use DB_File ;
+ use Fcntl ;
-When B<DB_File> is opening a database file it no longer terminates the
-process if I<dbopen> returned an error. This allows file protection
-errors to be caught at run time. Thanks to Judith Grass
-E<lt>grass@cybercash.comE<gt> for spotting the bug.
+ my ($dotdir, $HISTORY, %hist_db, $href, $binary_time, $date) ;
+ $dotdir = $ENV{HOME} || $ENV{LOGNAME};
-=item 0.3
+ $HISTORY = "$dotdir/.netscape/history.db";
-Added prototype support for multiple btree compare callbacks.
+ tie %hist_db, 'DB_File', $HISTORY
+ or die "Cannot open $HISTORY: $!\n" ;;
-=item 1.0
+ # Dump the complete database
+ while ( ($href, $binary_time) = each %hist_db ) {
-B<DB_File> has been in use for over a year. To reflect that, the
-version number has been incremented to 1.0.
+ # remove the terminating NULL
+ $href =~ s/\x00$// ;
-Added complete support for multiple concurrent callbacks.
+ # convert the binary time into a user friendly string
+ $date = localtime unpack("V", $binary_time);
+ print "$date $href\n" ;
+ }
-Using the I<push> method on an empty list didn't work properly. This
-has been fixed.
+ # check for the existence of a specific key
+ # remember to add the NULL
+ if ( $binary_time = $hist_db{"http://mox.perl.com/\x00"} ) {
+ $date = localtime unpack("V", $binary_time) ;
+ print "Last visited mox.perl.com on $date\n" ;
+ }
+ else {
+ print "Never visited mox.perl.com\n"
+ }
-=item 1.01
+ untie %hist_db ;
-Fixed a core dump problem with SunOS.
+=head2 The untie() Gotcha
-The return value from TIEHASH wasn't set to NULL when dbopen returned
-an error.
+If you make use of the Berkeley DB API, it is I<very> strongly
+recommended that you read L<perltie/The untie Gotcha>.
+
+Even if you don't currently make use of the API interface, it is still
+worth reading it.
+
+Here is an example which illustrates the problem from a B<DB_File>
+perspective:
+
+ use DB_File ;
+ use Fcntl ;
+
+ my %x ;
+ my $X ;
-=item 1.02
+ $X = tie %x, 'DB_File', 'tst.fil' , O_RDWR|O_TRUNC
+ or die "Cannot tie first time: $!" ;
-Merged OS2 specific code into DB_File.xs
+ $x{123} = 456 ;
-Removed some redundant code in DB_File.xs.
+ untie %x ;
-Documentation update.
+ tie %x, 'DB_File', 'tst.fil' , O_RDWR|O_CREAT
+ or die "Cannot tie second time: $!" ;
-Allow negative subscripts with RECNO interface.
+ untie %x ;
-Changed the default flags from O_RDWR to O_CREAT|O_RDWR.
+When run, the script will produce this error message:
-The example code which showed how to lock a database needed a call to
-C<sync> added. Without it the resultant database file was empty.
+ Cannot tie second time: Invalid argument at bad.file line 14.
-Added get_dups method.
+Although the error message above refers to the second tie() statement
+in the script, the source of the problem is really with the untie()
+statement that precedes it.
-=head1 WARNINGS
+Having read L<perltie> you will probably have already guessed that the
+error is caused by the extra copy of the tied object stored in C<$X>.
+If you haven't, then the problem boils down to the fact that the
+B<DB_File> destructor, DESTROY, will not be called until I<all>
+references to the tied object are destroyed. Both the tied variable,
+C<%x>, and C<$X> above hold a reference to the object. The call to
+untie() will destroy the first, but C<$X> still holds a valid
+reference, so the destructor will not get called and the database file
+F<tst.fil> will remain open. The fact that Berkeley DB then reports the
+attempt to open a database that is already open via the catch-all
+"Invalid argument" doesn't help.
-If you happen to find any other functions defined in the source for
-this module that have not been mentioned in this document -- beware. I
-may drop them at a moments notice.
+If you run the script with the C<-w> flag the error message becomes:
-If you cannot find any, then either you didn't look very hard or the
-moment has passed and I have dropped them.
+ untie attempted while 1 inner references still exist at bad.file line 12.
+ Cannot tie second time: Invalid argument at bad.file line 14.
+
+which pinpoints the real problem. Finally the script can now be
+modified to fix the original problem by destroying the API object
+before the untie:
+
+ ...
+ $x{123} = 456 ;
+
+ undef $X ;
+ untie %x ;
+
+ $X = tie %x, 'DB_File', 'tst.fil' , O_RDWR|O_CREAT
+ ...
+
+
+=head1 COMMON QUESTIONS
+
+=head2 Why is there Perl source in my database?
+
+If you look at the contents of a database file created by DB_File,
+there can sometimes be part of a Perl script included in it.
+
+This happens because Berkeley DB uses dynamic memory to allocate
+buffers which will subsequently be written to the database file. Being
+dynamic, the memory could have been used for anything before DB
+malloced it. As Berkeley DB doesn't clear the memory once it has been
+allocated, the unused portions will contain random junk. In the case
+where a Perl script gets written to the database, the random junk will
+correspond to an area of dynamic memory that happened to be used during
+the compilation of the script.
+
+Unless you don't like the possibility of there being part of your Perl
+scripts embedded in a database file, this is nothing to worry about.
+
+=head2 How do I store complex data structures with DB_File?
+
+Although B<DB_File> cannot do this directly, there is a module which
+can layer transparently over B<DB_File> to accomplish this feat.
+
+Check out the MLDBM module, available on CPAN in the directory
+F<modules/by-module/MLDBM>.
+
+=head2 What does "Invalid Argument" mean?
+
+You will get this error message when one of the parameters in the
+C<tie> call is wrong. Unfortunately there are quite a few parameters to
+get wrong, so it can be difficult to figure out which one it is.
+
+Here are a couple of possibilities:
+
+=over 5
+
+=item 1.
+
+Attempting to reopen a database without closing it.
+
+=item 2.
+
+Using the O_WRONLY flag.
+
+=back
+
+=head2 What does "Bareword 'DB_File' not allowed" mean?
+
+You will encounter this particular error message when you have the
+C<strict 'subs'> pragma (or the full strict pragma) in your script.
+Consider this script:
+
+ use warnings ;
+ use strict ;
+ use DB_File ;
+ my %x ;
+ tie %x, DB_File, "filename" ;
+
+Running it produces the error in question:
+
+ Bareword "DB_File" not allowed while "strict subs" in use
+
+To get around the error, place the word C<DB_File> in either single or
+double quotes, like this:
+
+ tie %x, "DB_File", "filename" ;
+
+Although it might seem like a real pain, it is really worth the effort
+of having a C<use strict> in all your scripts.
+
+=head1 REFERENCES
+
+Articles that are either about B<DB_File> or make use of it.
+
+=over 5
+
+=item 1.
+
+I<Full-Text Searching in Perl>, Tim Kientzle (tkientzle@ddj.com),
+Dr. Dobb's Journal, Issue 295, January 1999, pp 34-41
+
+=back
+
+=head1 HISTORY
+
+Moved to the Changes file.
=head1 BUGS
Some older versions of Berkeley DB had problems with fixed length
-records using the RECNO file format. The newest version at the time of
-writing was 1.85 - this seems to have fixed the problems with RECNO.
+records using the RECNO file format. This problem has been fixed since
+version 1.85 of Berkeley DB.
I am sure there are bugs in the code. If you do find any, or can
suggest any enhancements, I would welcome your comments.
=head1 AVAILABILITY
-Berkeley DB is available at your nearest CPAN archive (see
-L<perlmod/"CPAN"> for a list) in F<src/misc/db.1.85.tar.gz>, or via the
-host F<ftp.cs.berkeley.edu> in F</ucb/4bsd/db.tar.gz>. It is I<not> under
-the GPL.
+B<DB_File> comes with the standard Perl source distribution. Look in
+the directory F<ext/DB_File>. Given the amount of time between releases
+of Perl the version that ships with Perl is quite likely to be out of
+date, so the most recent version can always be found on CPAN (see
+L<perlmodlib/CPAN> for details), in the directory
+F<modules/by-module/DB_File>.
+
+This version of B<DB_File> will work with either version 1.x, 2.x or
+3.x of Berkeley DB, but is limited to the functionality provided by
+version 1.
+
+The official web site for Berkeley DB is F<http://www.sleepycat.com>.
+All versions of Berkeley DB are available there.
-If you are running IRIX, then get Berkeley DB from
+Alternatively, Berkeley DB version 1 is available at your nearest CPAN
+archive in F<src/misc/db.1.85.tar.gz>.
+
+If you are running IRIX, then get Berkeley DB version 1 from
F<http://reality.sgi.com/ariel>. It has the patches necessary to
compile properly on IRIX 5.3.
-=head1 SEE ALSO
+=head1 COPYRIGHT
+
+Copyright (c) 1995-2005 Paul Marquess. All rights reserved. This program
+is free software; you can redistribute it and/or modify it under the
+same terms as Perl itself.
-L<perl(1)>, L<dbopen(3)>, L<hash(3)>, L<recno(3)>, L<btree(3)>
+Although B<DB_File> is covered by the Perl license, the library it
+makes use of, namely Berkeley DB, is not. Berkeley DB has its own
+copyright and its own license. Please take the time to read it.
+
+Here are are few words taken from the Berkeley DB FAQ (at
+F<http://www.sleepycat.com>) regarding the license:
+
+ Do I have to license DB to use it in Perl scripts?
+
+ No. The Berkeley DB license requires that software that uses
+ Berkeley DB be freely redistributable. In the case of Perl, that
+ software is Perl, and not your scripts. Any Perl scripts that you
+ write are your property, including scripts that make use of
+ Berkeley DB. Neither the Perl license nor the Berkeley DB license
+ place any restriction on what you may do with them.
+
+If you are in any doubt about the license situation, contact either the
+Berkeley DB authors or the author of DB_File. See L<"AUTHOR"> for details.
+
+
+=head1 SEE ALSO
-Berkeley DB is available from F<ftp.cs.berkeley.edu> in the directory
-F</ucb/4bsd>.
+L<perl>, L<dbopen(3)>, L<hash(3)>, L<recno(3)>, L<btree(3)>,
+L<perldbmfilter>
=head1 AUTHOR
The DB_File interface was written by Paul Marquess
-E<lt>pmarquess@bfsec.bt.co.ukE<gt>.
-Questions about the DB system itself may be addressed to Keith Bostic
-E<lt>bostic@cs.berkeley.eduE<gt>.
+E<lt>pmqs@cpan.orgE<gt>.
+Questions about the DB system itself may be addressed to
+E<lt>db@sleepycat.comE<gt>.
=cut