-$ sav_ver = 'F$VERIFY(0)
+$! OpenVMS configuration procedure for Perl -- do not attempt to run under DOS
+$ sav_ver = 'F$VERIFY(0)'
+$ on control_y then goto clean_up
$! SET VERIFY
$!
$! For example, if you unpacked perl into: [USER.PERL-5n...] then you will
$! the whole VMSPerl crew.
$! Extended and messed about with by Dan Sugalski
$!
-$ sav_ver = F$VERIFY(0)
-$!
$! VMS-isms we will need:
$ echo = "write sys$output "
$ cat = "type"
$ delete := delete ! local symbol overrides globals with qualifiers
$ gcc_symbol = "gcc"
-$ ld = "Link"
+$ ld = "Link/nodebug"
$ ans = ""
$ macros = ""
$ extra_flags = ""
$ user_c_flags = ""
-$ use_ieee_math = "n"
+$ use_ieee_math = "y"
$ be_case_sensitive = "n"
+$ unlink_all_versions = "n"
+$ builder = "MMK"
$ use_vmsdebug_perl = "n"
$ use64bitall = "n"
$ use64bitint = "n"
+$ uselargefiles = "n"
+$ usesitecustomize = "n"
$ C_Compiler_Replace = "CC="
$ Thread_Live_Dangerously = "MT="
$ use_two_pot_malloc = "N"
$ use_pack_malloc = "N"
$ use_debugmalloc = "N"
$ ccflags = ""
+$ static_ext = ""
+$ nonxs_ext = ""
$ vms_default_directory_name = F$ENVIRONMENT("DEFAULT")
$ max_allowed_dir_depth = 3 ! e.g. [A.B.PERLxxx] not [A.B.C.PERLxxx]
$! max_allowed_dir_depth = 2 ! e.g. [A.PERLxxx] not [A.B.PERLxxx]
$!
+$! Sebastian Bazley's request: close the CONFIG handle with /NOLOG
+$! qualifier "just in case" (configure.com is re @ed in a bad state).
+$! This construct was tested to be not a problem as far back as
+$! VMS V5.5-2, hopefully earlier versions are OK as well.
+$!
+$ CLOSE/NOLOG CONFIG
+$!
+$! Now keep track of open files
+$!
$ vms_filcnt = F$GETJPI ("","FILCNT")
$!
$!: compute my invocation name
$ extractsh=""
$ override=""
$ knowitall=""
-$ Using_Dec_C = "n"
-$ Using_Gnu_C = "n"
-$ using_cxx = "n"
+$ ccname="VAX"
$ Dec_C_Version = ""
$ cxxversion = ""
$ use_threads = "F"
$ IF (F$LOCATE("=",P'i') .EQ. F$LENGTH(P'i'))
$ THEN
$ tmp = P'i' + "=""define"""
-$ 'tmp
+$ 'tmp'
$ DELETE/SYMBOL tmp
$ ELSE
$ IF (F$LOCATE("=",P'i') .EQ. (F$LENGTH(P'i') - 1))
$ THEN
$ me = F$PARSE(me,,,"NAME") + F$PARSE(me,,,"TYPE")
-$ echo "''me': use '-Usymbol=val' not '-Dsymbol='."
+$ echo "''me': use ""-Usymbol=val"" not ""-Dsymbol=""."
$ echo "''me': ignoring -D",P'i'
$ ELSE
$ tmp = F$EXTRACT(0,F$LOCATE("=",P'i'),P'i')
$ tmp = tmp + "=""" + F$EXTRACT(F$LOCATE("=",P'i')+1,F$LENGTH(P'i'),P'i') + """"
-$ 'tmp
+$ 'tmp'
$ DELETE/SYMBOL tmp
$ ENDIF
$ ENDIF
$ IF (F$LOCATE("=",P'i') .EQ. F$LENGTH(P'i'))
$ THEN
$ tmp = P'i' + "="""""
-$ 'tmp
+$ 'tmp'
$ DELETE/SYMBOL tmp
$ ELSE
$ IF (F$LOCATE("=",P'i') .LT. (F$LENGTH(P'i') - 1))
$ THEN
$ me = F$PARSE(me,,,"NAME") + F$PARSE(me,,,"TYPE")
-$ echo "''me': use '-Dsymbol=val' not '-Usymbol=val'."
+$ echo "''me': use ""-Dsymbol=val"" not ""-Usymbol=val""."
$ echo "''me': ignoring -U",P'i'
$ ELSE
$ tmp = P'i' + "=""undef"""
-$ 'tmp
+$ 'tmp'
$ DELETE/SYMBOL tmp
$ ENDIF
$ ENDIF
$ IF (error)
$ THEN
$ me = F$PARSE(me,,,"DIRECTORY")+ F$PARSE(me,,,"NAME")
-$ echo "Usage: @''me' [-dehmrEKOSV] [-fconfig.sh] [-Dsymbol] [-Dsymbol=value]"
+$ echo "Usage: @''me' [-dehmr""EKOSV""] [-fconfig.sh] [""-Dsymbol""] [""-Dsymbol=value""]"
$ echo " [-Usymbol] [-Usymbol=]"
-$ TYPE SYS$INPUT
+$ TYPE SYS$INPUT:
+$ DECK
"-d" : use defaults for all answers.
"-e" : go on without questioning past the production of config.sh. *
"-f" : specify an alternate default configuration file.
-"Usymbol" symbol gets the value 'undef'
-"Usymbol=" symbol gets completely empty
-V : print version number and exit (with a zero status).
+$ EOD
$ echo "%Config-I-VMS, lower case switches must be enclosed"
$ echo "-Config-I-VMS, in double quotation marks, e.g.:"
$ echo "-Config-I-VMS, @Configure ""-des"""
$Shut_up:
$ IF F$Mode() .eqs. "BATCH"
$ THEN
-$ STDOUT = F$GetQuI("DISPLAY_JOB","LOG_SPECIFICATION",,"THIS_JOB")
+$ STDOUT = F$PARSE(F$GETQUI("DISPLAY_ENTRY", "JOB_NAME"), -
+ F$GETQUI("DISPLAY_ENTRY", "LOG_SPECIFICATION"), ".LOG")
$ WRITE SYS$OUTPUT "Warning: Executing in batch mode. To avoid file locking conflicts,"
$ WRITE SYS$OUTPUT "output intended for SYS$OUTPUT will be sent to a new version"
$ WRITE SYS$OUTPUT STDOUT
$ GOTO Beyond_manifest
$ ENDIF
$ ELSE
-$! MANIFEST. has been found and we have set def'ed there -
-$! time to bail out before it's too late.
-$ tmp = f$extract(1,3,f$edit(f$getsyi("VERSION"),"TRIM,COLLAPSE"))
-$ IF (tmp .GES. "7.2") .AND. (F$GETSYI("HW_MODEL") .GE. 1024) THEN GOTO Beyond_depth_check
-$ IF (F$ELEMENT(max_allowed_dir_depth,".",F$ENVIRONMENT("Default")).nes.".")
+$! MANIFEST. has been found and we have set def'ed there.
+$! Time to bail out before it's too late, i.e. too deep.
+$! Depth check is unnecessary on Alpha VMS V7.2++ (even for ODS-2).
+$ tmp = f$extract(1,3,f$edit(f$getsyi("VERSION"),"TRIM,COLLAPSE"))
+$ IF (tmp .GES. "7.2") .AND. (F$GETSYI("HW_MODEL") .GE. 1024) THEN GOTO Beyond_depth_check
+$! Depth check also unnecessary on ODS 5 (or later) file systems.
+$ tmp = F$INTEGER(F$GETDVI(F$ENVIRONMENT("DEFAULT"),"ACPTYPE") - "F11V")
+$ IF (tmp .GE. 5) THEN GOTO Beyond_depth_check
+$ IF (F$ELEMENT(max_allowed_dir_depth,".",F$ENVIRONMENT("DEFAULT")).nes.".")
$ THEN
$ TYPE SYS$INPUT:
+$ DECK
%Config-E-VMS, ERROR:
Sorry! It apears as though your perl build sub-directory is already too
deep into the VMS file system. Please try moving stuff into a shallower
directory (or altering the "max_allowed_dir_depth" parameter).
+$ EOD
$ echo4 "ABORTING..."
$ SET DEFAULT 'vms_default_directory_name' !be kind rewind
$ STOP
$ THEN
$ CREATE/DIRECTORY [.UU]
$ ELSE
-$ IF ( F$SEARCH("[.UU]*.*").NES."" ) THEN DELETE/NOLOG [.UU]*.*;*
+$ IF ( F$SEARCH("[.UU]*.*").NES."" ) THEN DELETE/NOLOG/NOCONFIRM [.UU]*.*;*
$ ENDIF
$!: Configure runs within the UU subdirectory
$ SET DEFAULT [.UU]
$!
$ dirname = F$EXTRACT(0,F$LOCATE("]",file_2_find),file_2_find) + "]"
$ file_2_find = file_2_find - dirname
+$!
+$! may not need double dot check on ODS-5 volumes
+$ found = F$SEARCH(dirname + file_2_find)
+$ IF found .NES. "" THEN GOTO Read_loop_manifest
+$!
$ dots = 0
$Dot_loop:
$ dot_ele = F$ELEMENT(dots,".",file_2_find)
$ IF ((miss_list .NES. "").OR.(manifestfound .EQS. ""))
$ THEN
$ TYPE SYS$INPUT:
+$ DECK
+
THIS PACKAGE SEEMS TO BE INCOMPLETE.
do, don't blame me if something goes wrong. I advise you to type 'n'o
and contact the author (dan@sidhe.org)
+$ EOD
$ READ SYS$COMMAND/PROMPT="Continue? [n] " ans
$ IF ans
$ THEN
$ ENDIF
$ ELSE
$ echo4 "Looks good..."
-$ DELETE/NOLOG MISSING.;
+$ DELETE/NOLOG/NOCONFIRM MISSING.;
$ ENDIF ! (miss_list .NES. "")
$ ENDIF ! (manifestfound .EQS. "") ELSE
$!
$!: Configure runs within the UU subdirectory
$!
$!: compute the number of columns on the terminal for proper question formatting
-$! (sfn, will assume 80-ish)
+$ IF F$MODE() .EQS. "BATCH"
+$! else it winds up being 512 in batch
+$ THEN COLUMNS = 80
+$ ELSE COLUMNS = F$GETDVI("SYS$OUTPUT","DEVBUFSIZ")
+$ ENDIF
+$! "-des" sets SYS$OUTPUT to NL: with a DEVBUFSIZ too large (512 again)
+$ IF COLUMNS .GT. 210 THEN COLUMNS = 80
+$! not sure if this would actually be needed - it hopefully will not hurt
+$ IF COLUMNS .LT. 40 THEN COLUMNS = 40
$!
$!: set up the echo used in my read !sfn
$!: now set up to do reads with possible shell escape and default assignment !sfn
$ GOTO Beyond_myread
$!
+$! The sub_rp splitting is intended to handle long symbols such as the dflt for
+$! extensions.
+$!
$myread:
$ ans = ""
-$ If (fastread)
-$ Then
-$ echo4 "''rp'"
-$ Else
+$ len_rp = F$LENGTH(rp)
$ If (.NOT. silent) Then echo ""
-$ READ SYS$COMMAND/PROMPT="''rp'" ans
+$ IF len_rp .GT. 210
+$ THEN
+$ i_rp = 0
+$ rp_loop:
+$ sub_rp = F$EXTRACT(i_rp,COLUMNS,rp)
+$ i_rp = i_rp + COLUMNS
+$ if i_rp .LT. len_rp THEN echo4 "''sub_rp'"
+$ IF i_rp .LT. len_rp THEN GOTO rp_loop
+$ ELSE
+$ sub_rp = rp
+$ ENDIF
+$ if (fastread)
+$ then
+$ echo4 "''sub_rp'"
+$ else
+$ READ SYS$COMMAND/PROMPT="''sub_rp'" ans
+$ endif
$ IF (ans .EQS. "&-d")
$ THEN
$ echo4 "(OK, I will run with -d after this question.)"
-$ IF (.NOT. silent) THEN echo ""
-$ READ SYS$COMMAND/PROMPT="''rp'" ans
-$ fastread := yes
+$ echo ""
+$ deferred_fastread =1
+$ goto myread
$ ENDIF
$ IF (ans .EQS. "&-s")
$ THEN
$ echo4 "(OK, I will run with -s after this question.)"
$ echo ""
-$ READ SYS$COMMAND/PROMPT="''rp'" ans
+$ deferred_silent = 1
+$ goto myread
+$ ENDIF
+$ if (bool_dflt .nes. "")
+$ then
+$ if (ans .eqs. "") then ans = bool_dflt
+$ ans = f$extract(0,1,f$edit(ans,"collapse,upcase"))
+$ if (ans .eqs. "Y" .or. ans .eqs. "1" .or. ans .eqs. "T")
+$ then
+$ ans = "Y"
+$ else
+$ if (ans .eqs. "N" .or. ans .eqs. "0" .or. ans .eqs. "F")
+$ then
+$ ans = "N"
+$ else
+$ echo4 "Input not understood please answer 'Yes' or 'No'"
+$ goto myread
+$ endif
+$ endif
+$ bool_dflt = ""
+$ else
+$ ans = f$edit(ans,"trim,compress")
+$ if (ans .eqs. "") then ans = dflt
+$ if (f$edit(ans,"upcase") .eqs. "NONE") then ans = ""
+$ endif
+$ if f$type(deferred_silent) .nes. ""
+$ then
$ silent := true
$ GOSUB Shut_up
+$ delete/symbol deferred_silent
$ ENDIF
-$ Endif
+$ if f$type(deferred_fastread) .nes. ""
+$ then
+$ fastread = 1
+$ delete/symbol deferred_fastread
+$ endif
$ RETURN
$!
$Beyond_myread:
$ patchlevel_h = F$SEARCH("[-]patchlevel.h")
$ IF (patchlevel_h.NES."")
$ THEN
-$ SEARCH 'patchlevel_h "define","PERL_VERSION","epoch"/match=and/out=[]ver.out
+$ SEARCH 'patchlevel_h' "define","PERL_VERSION","epoch"/match=and/out=[]ver.out
$ IF .NOT. usedevel .AND. usedevel .NES. "define"
$ THEN
$ OPEN/READ CONFIG []ver.out
$ THEN
$ echo4 "patchlevel is " + F$STRING(xpatchlevel)
$ cat4 SYS$INPUT:
+$ DECK
*** WHOA THERE!!! ***
This is an UNSTABLE DEVELOPMENT release.
It is most seriously suggested that you do not continue any further
unless you want to help in developing and debugging Perl.
-$ dflt="n"
-$ rp="Do you really want to continue? [''dflt'] "
-$ IF (fastread) THEN fastread := FALSE
+$ EOD
+$ bool_dflt="n"
+$ rp="Do you really want to continue? [''bool_dflt'] "
+$ fastread_save = fastread
+$ fastread := FALSE
$ GOSUB myread
-$ IF ans .EQS. "" THEN ans = dflt
+$ fastread = fastread_save
+$ delete/symbol fastread_save
$ IF ans
$ THEN
$ echo4 "Okay, continuing."
$ echo4 "Okay, bye."
$ DELETE/NOLOG/NOCONFIRM []ver.out;
$ GOTO Clean_up
-$ STOP
-$ exit 0
$ ENDIF
$ ENDIF
$ DELETE/SYMBOL line
$ IF .NOT.($status.EQ.%X08D78053)
$ THEN
$ firsttime=""
-$ dflt = "n"
-$ rp = "Would you like to see the instructions? [''dflt'] "
+$ bool_dflt = "n"
+$ rp = "Would you like to see the instructions? [''bool_dflt'] "
$ GOSUB myread
$ if .NOT.ans THEN needman=""
$ ENDIF
$ IF (needman)
$ THEN
$ TYPE SYS$INPUT:
+$ DECK
This installation shell script will examine your system and ask you questions
to determine how the perl5 package should be installed. If you get
Many of the questions will have default answers in square
brackets; typing carriage return will give you the default.
-$ READ SYS$COMMAND/PROMPT="Type carriage return to continue " ans
+$ EOD
+$ if (fastread)
+$ then
+$ echo4 ""
+$ else
+$ READ SYS$COMMAND/PROMPT="Type carriage return to continue " ans
+$ endif
$ TYPE SYS$INPUT:
+$ DECK
In a hurry? You may run '@Configure "-d"'. This will bypass nearly all
the questions and use the computed defaults (or the previous answers provided
there was already a config.sh file). Type '@Configure "-h"' for a list of
options.
-$ READ SYS$COMMAND/PROMPT="Type carriage return to continue " ans
+$ EOD
+$ if (fastread)
+$ then
+$ echo4 ""
+$ else
+$ READ SYS$COMMAND/PROMPT="Type carriage return to continue " ans
+$ endif
$ TYPE SYS$INPUT:
+$ DECK
Much effort has been expended to ensure that this shell script will
run on any VMS system. If despite that it blows up on yours, your
you have with Configure.com, let me (dan@sidhe.org) know how I blew
it.
+$ EOD
$!This installation script affects things in two ways:
$!
$!1) it may do direct variable substitutions on some of the files included
$!If you make a mistake on a question, there is no easy way to back up to it
$!currently.
$!
-$ READ SYS$COMMAND/PROMPT="Type carriage return to continue " ans
+$ if (fastread)
+$ then
+$ echo4 ""
+$ else
+$ READ SYS$COMMAND/PROMPT="Type carriage return to continue " ans
+$ endif
$ IF (F$SEARCH("[-.CONFIG]INSTRUCT.").EQS."")
$ THEN
$ OPEN/WRITE CONFIG [-.CONFIG]INSTRUCT.
$! echo "Go find a public domain implementation or fix your PATH setting!"
$! echo ""
$! echo "Don't worry if any of the following aren't found..."
-$!: determine whether symbolic links are supported !sfn
+$!: determine whether symbolic links are supported !sfn !jem- further down
$!: see whether [:lower:] and [:upper:] are supported character classes !sfn
$!: set up the translation script tr, must be called with ./tr of course !sfn
$!
$ ENDIF
$Config_sh_found:
$ IF F$TYPE(osname) .EQS. "" THEN osname = F$EDIT(F$GETSYI("NODE_SWTYPE"),"COLLAPSE")
-$ IF F$TYPE(config_dflt) .EQS. "" THEN config_dflt = "n"
-$ rp = "Shall I @ ''config_sh' for default answers? [''config_dflt'] "
+$ bool_dflt = "n"
+$ IF F$TYPE(config_dflt) .NES. "" THEN bool_dflt = config_dflt
+$ rp = "Shall I use ''config_sh' for default answers? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans .EQS. "" THEN ans = config_dflt
$ IF ans
$ THEN
$ echo ""
$ echo "Fetching default answers from ''config_sh'..."
$!
-$! This @ is why config_sh must employ DCL syntax. Note that for
-$! symbols to be returned to this procedure they must be global.
-$! Which implies that assignments must be of the :== or == variety.
-$! Note further that the [-]config.sh file written by this procedure
-$! employs shell syntax. In order to convert shell syntax to DCL
-$! you might try:
-$!
-$! perl -ni -e "s/^#/!#/;s/='/==""/;s/'$/""/;print ""\$ $_"";" config.sh
-$!
-$! However, watch out for sig_nam, sig_nam_init, sig_num, startperl
-$! and any of the lower case double quoted variables such as the *format
-$! variables in such a config."sh".
-$!
-$ @'config_sh
+$! we do our own parsing of the shell-script stuff
+$! ...and only accept symbols if they're in the | delimited list below
+$!
+$ config_symbols0 ="|archlib|archlibexp|bin|binexp|builddir|cf_email|config_sh|installarchlib|installbin|installman1dir|installman3dir|"
+$ config_symbols1 ="|installprivlib|installscript|installsitearch|installsitelib|most|oldarchlib|oldarchlibexp|osname|pager|perl_symbol|perl_verb|"
+$ config_symbols2 ="|prefix|privlib|privlibexp|scriptdir|sitearch|sitearchexp|sitebin|sitelib|sitelib_stem|sitelibexp|try_cxx|use64bitall|use64bitint|"
+$ config_symbols3 ="|usecasesensitive|usedefaulttypes|usedevel|useieee|useithreads|usemultiplicity|usemymalloc|usedebugging_perl|useperlio|usesecurelog|"
+$ config_symbols4 ="|usethreads|usevmsdebug|usefaststdio|usemallocwrap|unlink_all_versions|uselargefiles|usesitecustomize|"
+$ config_symbols5 ="|buildmake|builder|"
+$!
+$ open/read CONFIG 'config_sh'
+$ rd_conf_loop:
+$ read/end=erd_conf_loop CONFIG line
+$ line = f$edit(line,"trim")
+$ if line .eqs. "" .or. f$extract(0,1,line) .eqs. "#" then goto rd_conf_loop
+$ sym = f$element(0,"=",line)
+$ if sym .eqs. "=" then goto rd_conf_loop
+$ dsym = "|"+sym+"|"
+$ k = 0
+$ rd_ck_loop:
+$ syms = config_symbols'k'
+$ j = f$locate(dsym, syms)
+$ if j .lt. f$length(syms) then goto erd_ck_loop
+$ k = k + 1
+$ if k .lt. 6 then goto rd_ck_loop
+$ goto rd_conf_loop
+$ erd_ck_loop:
+$ val = f$element(1,"=",line)
+$ val = f$extract(1,f$length(val)-2,val)
+$ write sys$output "''sym' = ""''val'"""
+$ 'sym' = "''val'"
+$ goto rd_conf_loop
+$ erd_conf_loop:
+$ close CONFIG
+$ delete/symbol config_symbols0
+$ delete/symbol config_symbols1
+$ delete/symbol config_symbols2
+$ delete/symbol config_symbols3
+$ delete/symbol config_symbols4
+$ delete/symbol config_symbols5
+$ delete/symbol sym
+$ delete/symbol val
+$ delete/symbol dsym
+$ if f$type(usedebugging_perl) .nes. ""
+$ then
+$ useperldebug = usedebugging_perl
+$ delete/symbol usedebugging_perl
+$ endif
$!
$ ENDIF
-$ DELETE/SYMBOL config_dflt
+$ if f$type(config_dflt) .nes. "" then DELETE/SYMBOL config_dflt
$!
$!we actually do not have "hints/" for VMS
$! TYPE SYS$INPUT:
+$! DECK
$!
$!First time through, eh? I have some defaults handy for the following systems:
$!
+$! EOD
$! echo " ","VMS_VAX"
$! echo " ","VMS_AXP"
+$! echo " ","VMS_IA64"
$! : Now look for a hint file osname_osvers, unless one has been
$! : specified already.
$! TYPE SYS$INPUT:
$ THEN
$ echo4 "Hmm.. I wonder what ''osname' is (?)"
$ TYPE SYS$INPUT:
+$ DECK
%Config-E-VMS, ERROR:
Err, you do not appear to be running VMS!
This procedure is intended to Configure the building of Perl for VMS.
-$ READ SYS$COMMAND/PROMPT="Continue anyway? [n] " ans
+$ EOD
+$ bool_dflt = "n"
+$ GOSUB myread
$ IF ans
$ THEN
$ echo4 "Continuing..."
$ STOP
$ EXIT 2 !$STATUS = "%X00000002" (error)
$ ENDIF
-$ ELSE !we are on VMS huzzah!
-$ IF .NOT.silent
-$ THEN TYPE SYS$INPUT:
-
-Configure uses the operating system name and version to set some defaults.
-The default value is probably right if the name rings a bell. Otherwise,
-since spelling matters for me, either accept the default or answer "none"
-to leave it blank.
-$ ENDIF
-$ rp = "Operating system name? [''osname'] "
-$ GOSUB myread
-$ IF ans.nes.""
-$ THEN
-$ IF (ans.NES.osname) !.AND.knowitall
-$ THEN
-$ echo4 "I'll go with ''osname' anyway..."
-$ ENDIF
-$ ENDIF
$ ENDIF !(osname .NES./.EQS. "VMS")
$!
$!: who configured the system
$ ELSE
$ tzspan = "''tzhour' hours"
$ ENDIF
-$ dflt = "y"
+$ bool_dflt = "y"
$ echo "Your system is ''tzspan' ''direction'UTC in England."
-$ rp = "(''systz') Is this UTC Time Zone Offset correct? [''dflt'] "
+$ rp = "(''systz') Is this UTC Time Zone Offset correct? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans.OR.(ans.EQS."")
+$ IF ans
$ THEN
$ tzneedset = "f"
$ tzd = systz
$! genconfig.pl has either archname='VMS_AXP' or 'VMS_VAX'
$! Note that DCL in VMS V5.4 does not have F$GETSYI("ARCH_NAME")
$! but does have F$GETSYI("HW_MODEL").
+$! Please try to use either archname .EQS. "VMS_VAX" or archname .EQS.
+$! "VMS_AXP" from here on to allow cross-platform configuration (e.g.
+$! configure a VAX build on an Alpha).
$!
-$ IF (F$GETSYI("HW_MODEL") .LT. 1024)
+$ IF (F$GETSYI("HW_MODEL") .LT. 1024 .AND. F$GETSYI("HW_MODEL") .GT. 0)
$ THEN
$ archname = "VMS_VAX"
-$ otherarch = "an Alpha"
+$ otherarch = "an Alpha or IA64"
$ alignbytes="8"
$ arch_type = "ARCH-TYPE=__VAX__"
$ ELSE
-$ archname = "VMS_AXP"
-$ otherarch = "a VAX"
+$ IF (F$GETSYI("ARCH_TYPE") .EQ. 2)
+$ THEN
+$ archname = "VMS_AXP"
+$ otherarch = "a VAX or IA64"
+$ arch_type = "ARCH-TYPE=__AXP__"
+$ ELSE
+$ archname = "VMS_IA64"
+$ otherarch = "a VAX or Alpha"
+$ arch_type = "ARCH-TYPE=__IA64__"
+$ ENDIF
$ alignbytes="8"
-$ arch_type = "ARCH-TYPE=__AXP__"
$ ENDIF
+$ dflt = archname
$ rp = "What is your architecture name? [''archname'] "
$ GOSUB myread
$ IF ans.NES.""
$ echo4 "I'll go with ''archname' anyway..."
$ ENDIF
$ ENDIF
-$ dflt = "n"
+$ bool_dflt = "n"
$ vms_prefix = "perl_root"
$ vms_prefixup = F$EDIT(vms_prefix,"UPCASE")
-$ rp = "Will you be sharing your ''vms_prefixup' with ''otherarch'? [''dflt'] "
+$ rp = "Will you be sharing your ''vms_prefixup' with ''otherarch'? [''bool_dflt'] "
$ GOSUB myread
-$ if ans.NES.""
-$ THEN
-$ ans = F$EXTRACT(0,1,F$EDIT(ans,"COLLAPSE, UPCASE"))
-$ ENDIF
-$ IF (ans.NES."Y")
+$ IF .NOT. ans
$ THEN
$ sharedperl = "N"
$ ELSE
$ THEN
$ macros = macros + """AXE=1"","
$ ENDIF
+$ IF (archname.EQS."VMS_IA64")
+$ THEN
+$ macros = macros + """IXE=1"","
+$ ENDIF
$ ENDIF
$!
$!: is AFS running? !sfn
$ IF F$TYPE(prefix) .EQS. ""
$ THEN
$ prefix = F$ENVIRONMENT("DEFAULT") - ".UU]" + "]"
-$ prefix = F$PARSE(prefix,,,,"NO_CONCEAL") - "][" - ".;"
+$ prefix = F$PARSE(prefix,,,,"NO_CONCEAL") - "][" - "000000." - ".000000" - ".;"
$ prefixbase = prefix - "]"
-$ prefix = prefixbase + ".]"
+$! Add _ROOT to make install PERL_ROOT differ from build directory.
+$ prefix = prefixbase + "_ROOT.]"
$ ENDIF
$ src = prefix
$!: determine root of directory hierarchy where package will be installed.
$! Check here for writability of requested PERL_ROOT if it is not the default (cwd).
$! -> recommend letting PERL_ROOT be PERL_SRC if requested PERL_ROOT is not writable.
$!
+$ tmp = perl_root - ".]" + "]"
+$ dflt = f$parse(tmp,,,,)
+$ IF dflt .eqs. ""
+$ THEN
+$ echo4 "''tmp' does not yet exist."
+$! create/directory 'tmp'
+$ ELSE
+$ echo4 "''tmp' already exists."
+$ ENDIF
+$!
$ vms_skip_install = "true"
-$ dflt = "y"
+$ bool_dflt = "y"
$! echo ""
-$ rp = "Skip the remaining """"where install"""" questions? [''dflt'] "
+$ rp = "Skip the remaining """"where install"""" questions? [''bool_dflt'] "
$ GOSUB myread
-$ IF (.NOT.ans).AND.(ans.NES."") THEN vms_skip_install = "false"
+$ IF (.NOT.ans) THEN vms_skip_install = "false"
$ IF (.NOT.vms_skip_install)
$ THEN
$!
$!: Usual default is /usr/local/lib/perl5. Also allow things like
$!: /opt/perl/lib, since /opt/perl/lib/perl5 would be redundant.
$ IF .NOT.silent
-$ THEN TYPE SYS$INPUT:
+$ THEN
+$ TYPE SYS$INPUT:
+$ DECK
There are some auxiliary files for perl5 that need to be put into a
private library directory that is accessible by everyone.
+$ EOD
$ ENDIF
$ IF F$TYPE(privlib) .NES. ""
$ THEN dflt = privlib
$ rp = "Pathname where the private library files will reside? "
$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
$ GOSUB myread
-$ IF ans.NES.""
-$ THEN privlib = ans
-$ ELSE privlib = dflt
-$ ENDIF
+$ privlib = ans
$!
$ ENDIF !%Config-I-VMS, skip remaining "where install" questions
$!
-$ perl_symbol = "true"
-$ perl_verb = ""
-$ dflt = "y"
+$ IF F$TYPE(perl_symbol) .EQS. "" THEN perl_symbol := true
+$ IF F$TYPE(perl_verb) .EQS. "" THEN perl_verb = ""
+$ IF perl_symbol
+$ THEN bool_dflt = "y"
+$ ELSE bool_dflt = "n"
+$ ENDIF
$ IF .NOT.silent
$ THEN
$ echo ""
$ echO "If you do not do so then you would need a DCL command verb at the"
$ echo "process or the system wide level."
$ ENDIF
-$ rp = "Invoke perl as a global symbol foreign command? [''dflt'] "
+$ rp = "Invoke perl as a global symbol foreign command? [''bool_dflt'] "
$ GOSUB myread
-$ IF (.NOT.ans).AND.(ans.NES."") THEN perl_symbol = "false"
+$ IF (.NOT.ans) THEN perl_symbol = "false"
$!
$ IF (.NOT.perl_symbol)
$ THEN
-$ dflt = "y"
+$ IF perl_verb .EQS. "DCLTABLES"
+$ THEN bool_dflt = "n"
+$ ELSE bool_dflt = "y"
+$ ENDIF
$ IF .NOT.silent
$ THEN
$ echo ""
$ echo "verb in a per-process table or in the system wide DCLTABLES (which"
$ echo "would require write privilege)."
$ ENDIF
-$ rp = "Invoke perl as a per process command verb? [ ''dflt' ] "
+$ rp = "Invoke perl as a per process command verb? [ ''bool_dflt' ] "
$ GOSUB myread
-$ IF (.NOT.ans).AND.(ans.NES."")
+$ IF (.NOT.ans)
$ THEN perl_verb = "DCLTABLES"
$ ELSE perl_verb = "PROCESS"
$ ENDIF
$!: get the patchlevel
$ echo ""
$ echo4 "Getting the current patchlevel..."
+$ patchlevel="0"
+$ subversion="0"
+$ api_revision="0"
+$ api_version="0"
+$ api_subversion="0"
+$ perl_patchlevel="0"
$ patchlevel_h = F$SEARCH("[-]patchlevel.h")
$ IF (patchlevel_h.NES."")
$ THEN
$ got_api_revision = "false"
$ got_api_version = "false"
$ got_api_subversion = "false"
+$ got_perl_patchlevel= "false"
$ OPEN/READONLY CONFIG 'patchlevel_h'
$Patchlevel_h_loop:
$ READ/END_Of_File=Close_patch/ERROR=Close_patch CONFIG line
$ api_subversion = F$ELEMENT(2," ",line)
$ got_api_subversion = "true"
$ ENDIF
-$ IF (.NOT.got_patch).OR.(.NOT.got_sub) THEN GOTO Patchlevel_h_loop
+$ IF ((F$LOCATE("""DEVEL",line).NE.F$LENGTH(line)).AND.(.NOT.got_perl_patchlevel))
+$ THEN
+$ line = F$EDIT(line,"COMPRESS, TRIM")
+$ perl_patchlevel = F$ELEMENT(1,"""",line)
+$ perl_patchlevel = perl_patchlevel - "DEVEL"
+$ got_perl_patchlevel = "true"
+$ ENDIF
+$ IF (.NOT. got_patch) .OR. -
+ (.NOT. got_sub) .OR. -
+ (.NOT. got_api_revision) .OR. -
+ (.NOT. got_api_version) .OR. -
+ (.NOT. got_api_subversion) .OR. -
+ (.NOT. got_perl_patchlevel) -
+ THEN GOTO Patchlevel_h_loop
$Close_patch:
$ CLOSE CONFIG
-$ ELSE
-$ patchlevel="0"
-$ subversion="0"
$ ENDIF
-$ IF (F$STRING(subversion) .NES. "0")
+$!
+$ IF F$SEARCH("[-].patch") .NES. ""
$ THEN
-$ echo "(You have ''package' revision ''revision' patchlevel ''patchlevel' subversion ''subversion'.)"
-$ ELSE
-$ echo "(You have ''package' revision ''revision' patchlevel ''patchlevel'.)"
+$ SET NOON
+$ OPEN/READ PATCH [-].patch
+$ READ PATCH line
+$ CLOSE PATCH
+$ tmp = F$EDIT(line,"COLLAPSE")
+$ SET ON
+$ IF tmp .GT. perl_patchlevel then perl_patchlevel = tmp
+$ ENDIF
+$!
+$ version_patchlevel_string = "version ''patchlevel' subversion ''subversion'"
+$ IF got_perl_patchlevel .AND. perl_patchlevel .NES. "0"
+$ THEN
+$ version_patchlevel_string = "''version_patchlevel_string' patch ''perl_patchlevel'"
$ ENDIF
+$ echo "(You have ''package' ''version_patchlevel_string'.)"
$!
$ version = revision + "_" + patchlevel + "_" + subversion
$!
$ echo "''package' contains architecture-dependent library files. If you are"
$ ENDIF
$ IF (.NOT.silent)
-$ THEN TYPE SYS$INPUT:
+$ THEN
+$ TYPE SYS$INPUT:
+$ DECK
sharing libraries in a heterogeneous environment, you might store
these files in a separate location. Otherwise, you can just include
them with the rest of the public library files.
+$ EOD
$ ENDIF
$ IF F$TYPE(archlib) .NES. ""
$ THEN dflt = archlib
$ rp = "Where do you want to put the public architecture-dependent libraries? "
$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
$ GOSUB myread
-$ IF ans.NES.""
-$ THEN archlib = ans
-$ ELSE archlib = dflt
-$ ENDIF
+$ archlib = ans
$!
$ ENDIF !%Config-I-VMS, skip "where install" questions
$!
$! This quotation from Configure has to be included on VMS:
$!
$ TYPE SYS$INPUT:
+$ DECK
There is, however, a strange, musty smell in the air that reminds me of
something...hmm...yes...I've got it...there's a VMS nearby, or I'm a Blit.
-$ CONTINUE
+$ EOD
$ IF (.NOT.vms_skip_install)
$ THEN
$!: it so happens the Eunice I know will not run shell scripts in Unix format
$!
$!: determine where site specific libraries go.
$ IF .NOT.silent
-$ THEN TYPE SYS$INPUT:
+$ THEN
+$ TYPE SYS$INPUT:
+$ DECK
The installation process will also create a directory for
site-specific extensions and modules. Some users find it convenient
to place all local files in this directory rather than in the main
distribution directory.
+$ EOD
$ ENDIF
$ IF F$TYPE(sitelib) .NES. ""
$ THEN dflt = sitelib
$ rp = "Pathname for the site-specific library files? "
$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
$ GOSUB myread
-$ IF ans.NES.""
-$ THEN sitelib = ans
-$ ELSE sitelib = dflt
-$ ENDIF
+$ sitelib = ans
$!
$!: determine where site specific architecture-dependent libraries go.
$ IF .NOT.silent
$ THEN TYPE SYS$INPUT:
+$ DECK
The installation process will also create a directory for
architecture-dependent site-specific extensions and modules.
+$ EOD
$ ENDIF
$ IF F$TYPE(sitearch) .NES. ""
$ THEN dflt = sitearch
$ rp = "Pathname for the site-specific architecture-dependent library files? "
$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
$ GOSUB myread
-$ IF ans.NES.""
-$ THEN sitearch = ans
-$ ELSE sitearch = dflt
-$ ENDIF
+$ sitearch = ans
$!
$!: determine where old public architecture dependent libraries might be
$!
$ IF F$TYPE(bin) .NES. ""
$ THEN dflt = bin
$! ELSE dflt = prefix - ".]" + ".BIN]"
-$ ELSE dflt = "/''vms_prefix'/000000"
+$ ELSE dflt = "/''vms_prefix'"
$ ENDIF
$ rp = "Pathname where the public executables will reside? "
$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
$ GOSUB myread
-$ IF ans.NES.""
-$ THEN bin = ans
-$ ELSE bin = dflt
+$ bin = ans
+$!
+$!: determine where add-on public executables go
+$ IF F$TYPE(sitebin) .NES. ""
+$ THEN dflt = sitebin
+$ ELSE dflt = "''vms_prefix':[bin.''archname']"
$ ENDIF
+$ rp = "Pathname where the add-on public executables should be installed? "
+$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
+$ GOSUB myread
+$ sitebin = ans
$!
$!: determine where manual pages are on this system
$!: What suffix to use on installed man pages
$ IF F$TYPE(archlib).EQS."" THEN -
archlib="''vms_prefix':[lib.''archname'.''version']"
$ IF F$TYPE(bin) .EQS. "" THEN -
- bin="/''vms_prefix'/000000"
+ bin="/''vms_prefix'"
$ IF F$TYPE(privlib) .EQS. "" THEN -
privlib ="''vms_prefix':[lib]"
$ IF F$TYPE(sitearch) .EQS. "" THEN -
sitearch="''vms_prefix':[lib.site_perl.''archname']"
$ IF F$TYPE(sitelib) .EQS. "" THEN -
sitelib ="''vms_prefix':[lib.site_perl]"
+$ IF F$TYPE(sitebin) .EQS. "" THEN -
+ sitebin="''vms_prefix':[bin.''archname']"
$ ENDIF !%Config-I-VMS, skip "where install" questions
$!
$! These derived locations can be set whether we've opted to
oldarchlibexp="''vms_prefix':[lib.''archname']"
$ IF F$TYPE(privlibexp) .EQS. "" THEN -
privlibexp ="''vms_prefix':[lib]"
+$ IF F$TYPE(scriptdir) .EQS. "" THEN -
+ scriptdir ="''vms_prefix':[utils]"
$ IF F$TYPE(sitearchexp) .EQS. "" THEN -
sitearchexp ="''vms_prefix':[lib.site_perl.''archname']"
$ IF F$TYPE(sitelib_stem) .EQS. "" THEN -
$ WRITE CONFIG "}"
$ CLOSE CONFIG
$!
-$! DEFINE SYS$ERROR _NLA0:
-$! DEFINE SYS$OUTPUT _NLA0:
+$ SET NOON
+$ DEFINE/USER_MODE SYS$ERROR _NLA0:
+$ DEFINE/USER_MODE SYS$OUTPUT _NLA0:
$ cc/NoObj/list=ccvms.lis ccvms.c
$ tmp = $status
-$! DEASSIGN SYS$OUTPUT
-$! DEASSIGN SYS$ERROR
+$ SET ON
$ IF (silent) THEN GOSUB Shut_up
$ IF tmp.NE.%X10B90001
$ THEN
$ THEN
$ echo "Will try cc/decc..."
$ ENDIF
+$ SET NOON
$ DEFINE/USER_MODE SYS$ERROR NL:
$ DEFINE/USER_MODE SYS$OUTPUT NL:
-$ SET NOON
$ cc/decc/NoObj/list=ccvms.lis ccvms.c
$ tmp = $status
$ SET ON
$ vms_cc_available = vms_cc_available + "cc/decc "
$ ENDIF
$ ELSE
-$ IF (F$LOCATE("DEC",line).NE.F$LENGTH(line)).or.(F$LOCATE("Compaq",line).NE.F$LENGTH(line))
+$ IF (F$LOCATE("DEC",line).NE.F$LENGTH(line)).or.(F$LOCATE("Compaq",line).NE.F$LENGTH(line)) -
+ .or.(F$LOCATE("HP",F$EDIT(line,"UPCASE")).NE.F$LENGTH(line))
$ THEN
$ vms_cc_dflt = "/decc"
$ vms_cc_available = vms_cc_available + "cc/decc "
$Gcc_initial_check:
$ echo "Checking for gcc"
$ OPEN/WRITE CONFIG gccvers.lis
+$ SET NOON
$ DEFINE/USER_MODE SYS$ERROR CONFIG
$ DEFINE/USER_MODE SYS$OUTPUT CONFIG
$ 'gcc_symbol'/noobj/version _nla0:
$ tmp = $status
+$ SET ON
$ IF (silent) THEN GOSUB Shut_up
$ CLOSE CONFIG
$ IF (tmp.NE.%X10000001).and.(tmp.ne.%X00030001)
$ THEN
-$ echo "Symbol ""''gcc_symbol'"" is not defined. I guess you don't have it."
+$ echo "Symbol ""''gcc_symbol'"" is not defined. I guess you do not have it."
$ DELETE/NOLOG/NOCONFIRM gccvers.lis;
$ GOTO Cxx_initial_check
$ ENDIF
$!
$! Do note that [vms]perl source files have a ways to go before they will
$! compile under CXX.
-$! In order to test Configure.com with CXX swap the '!' comment character
-$! between the following two lines.
+$! In order to test Configure.com with CXX invoke it with "-Dtry_cxx" on
+$! the command line.
$!
-$! IF 1 .eq. 1
-$ IF 1 .eq. 0
+$ IF F$TYPE(try_cxx) .EQS. "" THEN try_cxx := n
+$ IF try_cxx .OR. try_cxx .EQS. "define"
$!
$ THEN
$!
$ SET NOON
$ DEFINE/USER_MODE SYS$OUTPUT NL:
$ DEFINE/USER_MODE SYS$ERROR NL:
-$ link ccvms.obj
+$ link/nodebug ccvms.obj
$ tmp = $status
$ SET ON
$ ! success $status with:
$ THEN
$ ans = F$EDIT(ans,"TRIM, COMPRESS, LOWERCASE")
$ Mcc = ans
-$ IF (F$LOCATE("dec",ans).NE.F$LENGTH(ans)).or.(F$LOCATE("compaq",ans).NE.F$LENGTH(ans))
+$ IF (F$LOCATE("dec",ans).NE.F$LENGTH(ans)).or.(F$LOCATE("compaq",ans).NE.F$LENGTH(ans)) -
+ .or.(F$LOCATE("hp",ans).NE.F$LENGTH(ans))
$ THEN
$ Mcc = "cc/decc"
-$ Using_Dec_C := Y
+$! CPQ ?
+$ ccname := DEC
$ C_COMPILER_Replace = "CC=cc=''Mcc'"
$ ENDIF
$ IF F$LOCATE("cxx",F$EDIT(ans,"COLLAPSE,LOWERCASE")) .NE. F$LENGTH(ans)
$ THEN
$ Mcc = "cxx"
-$ using_cxx := Y
+$ ccname := CXX
$ ld = ld_try
-$! C_COMPILER_Replace = "CC=cc=''Mcc'"
-$ ENDIF
-$ IF Mcc.NES.dflt
-$ THEN
-$ IF F$LOCATE("dec",dflt) .NE. F$LENGTH(dflt) .or. -
- F$LOCATE("compaq",dflt) .NE. F$LENGTH(dflt)
-$ THEN
-$ C_COMPILER_Replace = "CC=cc=''Mcc'"
-$ ELSE
-$ Using_Dec_C := Y
-$ ENDIF
-$ ELSE
-$ IF Mcc .EQS. "cc/decc"
+$ C_COMPILER_Replace = "CC=cc=''Mcc'"
+$ ELSE ! Not_cxx
+$ IF Mcc.NES.dflt
$ THEN
-$ Using_Dec_C := Y
-$ C_COMPILER_Replace = "CC=cc=''Mcc'"
+$ IF F$LOCATE("dec",dflt) .NE. F$LENGTH(dflt) .or. -
+ F$LOCATE("compaq",dflt) .NE. F$LENGTH(dflt)
+$ THEN
+$ C_COMPILER_Replace = "CC=cc=''Mcc'"
+$ ELSE
+$ ccname := DEC
+$ ENDIF
+$ ELSE
+$ IF Mcc .EQS. "cc/decc"
+$ THEN
+$ ccname := DEC
+$ C_COMPILER_Replace = "CC=cc=''Mcc'"
+$ ENDIF
$ ENDIF
$ ENDIF
$ ELSE
$ Mcc = dflt
$ IF Mcc .EQS. "cc/decc"
$ THEN
-$ Using_Dec_C := Y
+$ ccname := DEC
$ C_COMPILER_Replace = "CC=cc=''Mcc'"
$ ENDIF
$ IF Mcc .EQS. "gcc"
$ THEN
-$ Using_Gnu_C := Y
+$ ccname := GCC
$ C_COMPILER_Replace = "CC=cc=''Mcc'"
$ ENDIF
$ ENDIF
$Decc_Version_check:
$ ccversion=""
-$ IF Using_Dec_C
+$ IF ccname .EQS. "DEC"
$ THEN
$ echo ""
-$ echo4 "Checking for Dec C's version number..."
+$ echo4 "Checking for the Dec C version number..."
$ OPEN/WRITE CONFIG deccvers.c
$ WRITE CONFIG "#include <stdlib.h>" !DECC is sooo picky
$ WRITE CONFIG "#include <stdio.h>"
$ IF (silent) THEN GOSUB Shut_up
$ DEFINE/USER_MODE SYS$ERROR NL:
$ DEFINE/USER_MODE SYS$OUTPUT NL:
-$ link deccvers.obj
+$ link/nodebug deccvers.obj
$ tmp = $status
$ IF (silent) THEN GOSUB Shut_up
$ OPEN/WRITE CONFIG deccvers.out
$ echo "You are using Dec C ''line'"
$ ccversion = line
$ Dec_C_Version = F$INTEGER(line)
-$ IF Dec_C_Version .GE. 60200000
+$ IF Dec_C_Version .GE. 60200000 .AND. archname .NES. "VMS_VAX"
$ THEN
$ echo4 "adding /NOANSI_ALIAS qualifier to ccflags."
$ ccflags = ccflags + "/NOANSI_ALIAS"
$ ENDIF
$Gcc_check:
$ gccversion = ""
-$ IF Using_Gnu_C
+$ IF ccname .EQS. "GCC"
$ THEN
$ vaxcrtl_olb = F$SEARCH("SYS$LIBRARY:VAXCRTL.OLB")
$ vaxcrtl_exe = F$SEARCH("SYS$SHARE:VAXCRTL.EXE")
$ echo ""
$ echo4 "Checking for GNU cc in disguise and/or its version number..." !>&4
$ OPEN/WRITE CONFIG gccvers.c
-$! WRITE CONFIG "#include <stdlib.h>" !DECC is sooo picky
$ WRITE CONFIG "#include <stdio.h>"
$ WRITE CONFIG "int main() {"
$ WRITE CONFIG "#ifdef __GNUC__"
$ THEN
$ IF F$LOCATE("VAXCRTL",gcclib_olb).NE.F$LENGTH(gcclib_olb)
$ THEN
-$ link gccvers.obj,'gcclib_olb',SYS$LIBRARY:VAXCRTL/Library
+$ link/nodebug gccvers.obj,'gcclib_olb',SYS$LIBRARY:VAXCRTL/Library
$ tmp = $status
$ ELSE
-$ link gccvers.obj,'gcclib_olb'
+$ link/nodebug gccvers.obj,'gcclib_olb'
$ tmp = $status
$ ENDIF
$ ELSE
$ OPEN/WRITE CONFIG GCCVERS.OPT
$ WRITE CONFIG "SYS$SHARE:VAXCRTL/SHARE"
$ CLOSE CONFIG
-$ link gccvers.obj,GCCVERS.OPT/OPT,'gcclib_olb'
+$ link/nodebug gccvers.obj,GCCVERS.OPT/OPT,'gcclib_olb'
$ tmp = $status
$ ENDIF
$ DEASSIGN SYS$ERROR
$ ELSE
$ echo "You are using GNU cc ''line'"
$ gccversion = line
-$ Using_Gnu_C := Y
+$ ccname := "GCC"
$ C_COMPILER_Replace = "CC=cc=''Mcc'"
$ GOTO Include_dirs
$ ENDIF
$ ENDIF
$ ENDIF
$Cxx_Version_check:
-$ IF using_cxx
+$ IF ccname .EQS. "CXX"
$ THEN
$ OPEN/WRITE CONFIG cxxvers.c
$ WRITE CONFIG "#include <stdio.h>"
$List_Parse:
$ OPEN/READ CONFIG ccvms.lis
$ READ CONFIG line
-$ IF (F$GETSYI("HW_MODEL") .LT. 1024)
+$ IF archname .EQS. "VMS_VAX"
$ THEN
$ read CONFIG line
$ archsufx = "VAX"
$ ELSE
-$ archsufx = "AXP"
+$ IF archname .EQS. "VMS_AXP"
+$ THEN
+$ archsufx = "AXP"
+$ ELSE
+$ archsufx = "IA64"
+$ ENDIF
$ ENDIF
$ CLOSE CONFIG
$ line = F$EDIT(line,"TRIM,COMPRESS")
F$TRNLNM("UCX$INET_HOST") .nes. "" .and. -
F$TRNLNM("UCX$INET_DOMAIN") .nes. "" THEN -
myhostname = F$TRNLNM("UCX$INET_HOST") + "." + F$TRNLNM("UCX$INET_DOMAIN")
+$ IF myhostname.eqs."".and. -
+ F$TRNLNM("TCPIP$INET_HOST") .nes. "" .and. -
+ F$TRNLNM("TCPIP$INET_DOMAIN") .nes. "" THEN -
+ myhostname = F$TRNLNM("TCPIP$INET_HOST") + "." + F$TRNLNM("TCPIP$INET_DOMAIN")
$ IF myhostname.eqs."" THEN myhostname = F$TRNLNM("TCPWARE_DOMAINNAME")
$ IF myhostname.eqs."" THEN myhostname = F$TRNLNM("NEWS_ADDRESS")
$ IF myhostname.eqs."" THEN myhostname = F$TRNLNM("SYS$NODE") - "::"
$!: you do not want to know about this
$!: verify guess
$ rp = "Your host name appears to be """"''myhostname'"""". Right? "
+$ bool_dflt = "y"
$ GOSUB myread
-$ IF (.not.ans).and.(ans.NES."")
+$ IF (.not.ans)
$ THEN
$ READ SYS$COMMAND/PROMPT= -
"Please type the (one word) name of your host: " ans
$ IF mydomain.NES."" !no periods in DECnet names like "MYDECNODE::"
$ THEN
$ rp = "What is your domain name? [''mydomain'] "
+$ dflt = mydomain
$ GOSUB myread
-$ IF ans .nes. "" THEN mydomain = ans
+$ mydomain = ans
$!: translate upper to lower if necessary
$ mydomain = F$EDIT(mydomain,"COLLAPSE")
$ mylowdomain = F$EDIT(mydomain," LOWERCASE")
$ myhostname = myhostname - mydomain
$ echo "(Trimming domain name from host name--host name is now ''myhostname')"
$ IF .NOT.silent
-$ THEN TYPE SYS$INPUT:
+$ THEN
+$ TYPE SYS$INPUT:
+$ DECK
I need to get your e-mail address in Internet format if possible, i.e.
something like user@host.domain. Please answer accurately since I have
no easy means to double check it. The default value provided below
is most probably close to the reality but may not be valid from outside
your organization...
+$ EOD
$ ENDIF
-$ dflt = "''cf_by'@''myhostname'"+"''mydomain'"
-$ rp = "What is your e-mail address? [''dflt'] "
-$ GOSUB myread
-$ IF ans .nes. ""
-$ THEN cf_email = ans
-$ ELSE cf_email = dflt
+$ IF F$TYPE(cf_email) .EQS. ""
+$ THEN
+$ dflt = "''cf_by'@''myhostname'"+"''mydomain'"
+$ rp = "What is your e-mail address? [''dflt'] "
+$ GOSUB myread
+$ cf_email = ans
$ ENDIF
$!
$ IF .NOT.silent
-$ THEN TYPE SYS$INPUT:
+$ THEN
+$ TYPE SYS$INPUT:
+$ DECK
If you or somebody else will be maintaining perl at your site, please
fill in the correct e-mail address here so that they may be contacted
if necessary. Currently, the "perlbug" program included with perl
will send mail to this address in addition to perlbug@perl.com. You may
enter "none" for no administrator.
+$ EOD
$ ENDIF
$ dflt = "''cf_email'"
$ rp = "Perl administrator e-mail address [''dflt'] "
$ GOSUB myread
-$ IF ans .nes. ""
-$ THEN perladmin = ans
-$ ELSE perladmin = dflt
-$ ENDIF
+$ perladmin = ans
$!
$!: determine where public executable scripts go
$!: determine perl absolute location
$!: Looking for optional libraries
$!: see if nm is to be used to determine whether a symbol is defined or not
$!: get list of predefined functions in a handy place
-$!: see if we have sigaction
+$!: see if we have sigaction or sigprocmask
$!: see whether socketshr exists
$ IF (F$SEARCH(F$PARSE("SocketShr","Sys$Share:.Exe")).NES."")
$ THEN
$ Has_socketshr = "T"
$ echo ""
-$ echo4 "Hmm... Looks like you have SOCKETSHR's Berkeley networking support."
+$ echo4 "Hmm... Looks like you have SOCKETSHR Berkeley networking support."
$ ELSE
$ Has_socketshr = "F"
$ ENDIF
-$ IF (Dec_C_Version .GE. 50200000)
+$ IF (ccname .EQS. "DEC" .AND. Dec_C_Version .GE. 50200000) .OR. (ccname .EQS. "CXX")
$ THEN
$ Has_Dec_C_Sockets = "T"
$ echo ""
-$ echo4 "Hmm... Looks like you've got Dec C's Berkeley networking support."
+$ echo4 "Hmm... Looks like you have Dec C Berkeley networking support."
$ ELSE
$ Has_Dec_C_Sockets = "F"
$ ENDIF
$ IF Has_socketshr .OR. Has_Dec_C_Sockets
$ THEN
$ echo ""
-$ echo "You've got sockets available. Which socket stack do you want to"
-$ echo "build into perl?"
+$ echo "You have sockets available. Which socket stack do you want to"
+$ echo "build into Perl?"
$ IF Has_Dec_C_Sockets
$ THEN
$ dflt = "DECC"
-$ else
+$ ELSE
$ dflt = "SOCKETSHR"
-$ endif
+$ ENDIF
$ rp = "Choose socket stack (NONE"
$ IF Has_socketshr THEN rp = rp + ",SOCKETSHR"
$ IF Has_Dec_C_Sockets THEN rp = rp + ",DECC"
$ rp = rp + ") [''dflt'] "
$ GOSUB myread
-$ IF ans .EQS. "" THEN ans = "''dflt'"
$ Has_Dec_C_Sockets = "F"
$ Has_socketshr = "F"
$ ans = F$EDIT(ans,"TRIM,COMPRESS,LOWERCASE")
-$ IF ans.eqs."decc" then Has_Dec_C_Sockets = "T"
-$ IF ans.eqs."socketshr" then Has_socketshr = "T"
+$ IF ans.eqs."decc" THEN Has_Dec_C_Sockets = "T"
+$ IF ans.eqs."socketshr" THEN Has_socketshr = "T"
$ ENDIF
$!
$!
$ echo "You should only select this option if you are debugging"
$ echo "perl itself. This can be a useful feature if you are "
$ echo "embedding perl in a program."
-$ dflt = "n"
-$ rp = "Build a VMS-DEBUG version of Perl? [''dflt'] "
+$ bool_dflt = "n"
+$ if f$type(usevmsdebug) .nes. ""
+$ then
+$ if usevmsdebug .or. usevmsdebug .eqs. "define" then bool_dflt="y"
+$ endif
+$ rp = "Build a VMS-DEBUG version of Perl? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans.eqs."" then ans = dflt
-$ IF F$EXTRACT(0, 1, F$EDIT(ans,"COLLAPSE,UPCASE")) .eqs. "Y"
+$ use_vmsdebug_perl = ans
+$ IF use_vmsdebug_perl
$ THEN
-$ use_vmsdebug_perl = "Y"
+$ usevmsdebug = "define"
$ macros = macros + """__DEBUG__=1"","
$ ELSE
-$ use_vmsdebug_perl = "N"
+$ usevmsdebug = "undef"
$ ENDIF
$!
$! Ask if they want to build with DEBUGGING
$ echo ""
-$ echo "Perl can be built with extra runtime debugging enabled. This
-$ echo "enables the -D switch, at the cost of some performance. It
-$ echo "was mandatory on perl 5.005 and before on VMS, but is now
-$ echo "optional. If you don't generally use it you should probably
-$ echo "leave this off and gain a bit of extra speed.
-$ dflt = "y"
-$ rp = "Build a DEBUGGING version of Perl? [''dflt'] "
+$ echo "Perl can be built with extra runtime debugging enabled. This"
+$ echo "enables the -D switch, at the cost of some performance. It"
+$ echo "was mandatory on perl 5.005 and before on VMS, but is now"
+$ echo "optional. If you do not generally use it you should probably"
+$ echo "leave this off and gain a bit of extra speed."
+$ bool_dflt = "y"
+$ if f$type(useperldebug) .nes. ""
+$ then
+$ if f$extract(0,1,f$edit(useperldebug,"collapse,upcase")).eqs."N" .or. useperldebug .eqs. "undef" then bool_dflt="n"
+$ endif
+$ rp = "Build a DEBUGGING version of Perl? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans.eqs."" then ans = dflt
-$ IF F$EXTRACT(0, 1, F$EDIT(ans,"COLLAPSE,UPCASE")) .eqs. "Y"
-$ THEN
-$ use_debugging_perl = "Y"
-$ ELSE
-$ use_debugging_perl = "N"
-$ ENDIF
+$ use_debugging_perl = ans
$!
$! Ask if they want to build with MULTIPLICITY
$ echo ""
$ echo "Perl can be built so that multiple Perl interpreters can coexist"
$ echo "within the same Perl executable."
-$ echo "There is some performance overhead, however, so you
-$ echo "probably don't want to choose this unless you're going to be doing
-$ echo "things with embedded perl."
-$ dflt = "n"
-$ rp = "Build Perl for multiplicity? [''dflt'] "
+$ echo "There is some performance overhead, however, so you"
+$ echo "probably do not want to choose this unless you are going to be"
+$ echo "doing things with embedded perl."
+$ bool_dflt = "n"
+$ if f$type(usemultiplicity) .nes. ""
+$ then
+$ if usemultiplicity .or. usemultiplicity .eqs. "define" then bool_dflt = "y"
+$ endif
+$ rp = "Build Perl for multiplicity? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans.eqs."" then ans = dflt
$ IF ans
$ THEN
$ usemultiplicity="define"
$ ENDIF
$!
$! Ask if they want to build with 64-bit support
-$ IF (archname.eqs."VMS_AXP").and.("''f$extract(1,3, f$getsyi(""version""))'".ges."7.1")
+$ IF (archname.NES."VMS_VAX").and.("''f$extract(1,3, f$getsyi(""version""))'".ges."7.1")
$ THEN
-$ dflt = use64bitint
+$ bool_dflt = "n"
+$ IF F$TYPE(use64bitint) .NES. ""
+$ THEN
+$ IF use64bitint .OR. use64bitint .eqs. "define" THEN bool_dflt = "y"
+$ ENDIF
$ echo ""
-$ echo "You can have native 64-bit long integers.
+$ echo "You have natively 64-bit long integers."
$ echo ""
-$ echo "Perl can be built to take advantage of 64-bit integer types
-$ echo "on some systems, which provide a much larger range for perl's
-$ echo "mathematical operations. (Note that does *not* enable 64-bit
-$ echo "fileops at the moment, as Dec C doesn't do that yet)."
-$ echo "Choosing this option will most probably introduce binary incompatibilities.
+$ echo "Perl can be built to take advantage of 64-bit integer types"
+$ echo "on some systems, To do so, Configure can be run with -Duse64bitint."
+$ echo "Choosing this option will most probably introduce binary incompatibilities."
$ echo ""
-$ echo "If this doesn't make any sense to you, just accept the default ''dflt'.
-$ rp = "Try to use 64-bit integers, if available? [''dflt'] "
+$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
+$ rp = "Try to use 64-bit integers, if available? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans .EQS. "" THEN ans = dflt
-$ IF (f$extract(0, 1, f$edit(ans,"COLLAPSE,UPCASE")) .EQS. "Y")
+$ use64bitint = ans
+$!
+$ bool_dflt = "n"
+$ IF F$TYPE(use64bitall) .NES. ""
$ THEN
-$ use64bitint="Y"
-$ ELSE
-$ use64bitint="N"
+$ IF use64bitall .OR. use64bitall .eqs. "define" THEN bool_dflt = "y"
$ ENDIF
-$ IF (use64bitint)
+$ echo ""
+$ echo "You may also choose to try maximal 64-bitness. It means using as much"
+$ echo "64-bitness as possible on the platform. This in turn means even more"
+$ echo "binary incompatibilities. On the other hand, your platform may not"
+$ echo "have any more 64-bitness available than what you already have chosen."
+$ echo ""
+$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
+$ rp = "Try to use maximal 64-bit support, if available? [''bool_dflt'] "
+$ GOSUB myread
+$ use64bitall=ans
+$ IF use64bitall .AND. .NOT. use64bitint
$ THEN
-$ dflt = use64bitall
-$ echo ""
-$ echo "Since you chose 64-bitness you may want to try maximal 64-bitness.
-$ echo "What you have chosen is minimal 64-bitness which means just enough
-$ echo "to get 64-bit integers. The maximal means using as much 64-bitness
-$ echo "as is possible on the platform. This in turn means even more binary
-$ echo "incompatibilities. On the other hand, your platform may not have
-$ echo "any more maximal 64-bitness than what you already have chosen.
$ echo ""
-$ echo "If this doesn't make any sense to you, just accept the default ''dflt'.
-$ rp = "Try to use full 64-bit support, if available? [''dflt'] "
-$ GOSUB myread
-$ IF ans .EQS. "" THEN ans = dflt
-$ IF (f$extract(0, 1, f$edit(ans,"COLLAPSE,UPCASE")) .EQS. "Y")
-$ THEN
-$ use64bitall="Y"
-$ ELSE
-$ use64bitall="N"
-$ ENDIF
+$ echo "Since you have chosen a maximally 64-bit build, I'm also turning on"
+$ echo "the use of 64-bit integers."
+$ echo "I am also setting the default to use large files if available."
+$ use64bitint="Y"
+$ ENDIF
+$!
+$ bool_dflt = use64bitall
+$ IF F$TYPE(uselargefiles) .NES. ""
+$ THEN
+$ IF uselargefiles .OR. uselargefiles .eqs. "define" THEN bool_dflt = "y"
$ ENDIF
-$ ENDIF ! AXP && >= 7.1
+$ echo ""
+$ echo "Perl can be built to understand large files (files larger than 2 gigabytes)"
+$ echo "on some systems. To do so, Configure can be run with -Duselargefiles."
+$ echo ""
+$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
+$ rp = "Try to understand large files, if available? [''bool_dflt'] "
+$ GOSUB myread
+$ uselargefiles=ans
+$!
+$ ENDIF ! not VAX && >= 7.1
+$!
+$ IF usesitecustomize .OR. usesitecustomize .eqs. "define"
+$ THEN
+$ usesitecustomize = "define"
+$ ELSE
+$ usesitecustomize = "undef"
+$ ENDIF
$!
$! Ask about threads, if appropriate
-$ if Using_Dec_C
+$ IF ccname .EQS. "DEC" .OR. ccname .EQS. "CXX"
$ THEN
$ echo ""
-$ echo "This version of Perl can be built with threads. While really nifty,
-$ echo "they are a beta feature, and there is a speed penalty for perl
-$ echo "programs if you build with threads *even if you don't use them*
-$ dflt = "n"
-$ rp = "Build with threads? [''dflt'] "
+$ echo "Perl can be built to take advantage of threads on some systems."
+$ echo "To do so, configure.com can be run with -""Dusethreads""."
+$ echo ""
+$ echo "Note that Perl built with threading support runs slightly slower"
+$ echo "and uses more memory than plain Perl. The current implementation"
+$ echo "is believed to be stable, but it is fairly new, and so should be"
+$ echo "treated with caution."
+$ echo ""
+$ bool_dflt = "n"
+$ if f$type(usethreads) .nes. ""
+$ then
+$ if usethreads .or. usethreads .eqs. "define" then bool_dflt="y"
+$ endif
+$! Catch cases where user specified ithreads or 5005threads but
+$! forgot -Dusethreads
+$ if f$type(useithreads) .nes. ""
+$ then
+$ if useithreads .or. useithreads .eqs. "define" then bool_dflt="y"
+$ endif
+$ if f$type(use5005threads) .nes. ""
+$ then
+$ if use5005threads .or. use5005threads .eqs. "define" then bool_dflt="y"
+$ endif
+$ echo "If this doesn't make any sense to you, just accept the default '" + bool_dflt + "'."
+$ rp = "Build a threading Perl? [''bool_dflt'] "
$ GOSUB myread
-$ if ans.eqs."" then ans = dflt
-$ if (f$extract(0, 1, "''ans'").eqs."Y").or.(f$extract(0, 1, "''ans'").eqs."y")
+$ if ans
$ THEN
$ use_threads="T"
-$!
-$ ! Shall we do the 5.005-stype threads, or IThreads?
-$ echo "As of 5.5.640, Perl has two different internal threading
-$ echo "implementations, the 5.005 version (5005threads) and an
-$ echo "interpreter-based version (ithreads) that has one
-$ echo "interpreter per thread. Both are very experimental. This
-$ echo "arrangement exists to help developers work out which one
-$ echo "is better.
-$ echo "
-$ echo "If you're a casual user, you probably don't want
-$ echo "interpreter-threads at this time. There doesn't yet exist
-$ echo "a way to create threads from within Perl in this model,
-$ echo "i.e., ""use Thread;"" will NOT work.
-$ echo "
-$ dflt = "n"
-$ rp = "Build with Interpreter threads? [''dflt']
+$ ! Shall we do the 5.005-type threads, or IThreads?
+$ echo "Since release 5.6, Perl has had two different threading implementations,"
+$ echo "the newer interpreter-based version (ithreads) with one interpreter per"
+$ echo "thread, and the older 5.005 version (5005threads)."
+$ echo "The 5005threads version is effectively unmaintained and will probably be"
+$ echo "removed in Perl 5.10, so there should be no need to build a Perl using it"
+$ echo "unless needed for backwards compatibility with some existing 5.005threads"
+$ echo "code."
+$ echo ""
+$ bool_dflt = "y"
+$ if f$type(useithreads) .nes. ""
+$ then
+$ if useithreads .eqs. "undef" then bool_dflt="n"
+$ endif
+$ if f$type(use5005threads) .nes. ""
+$ then
+$ if use5005threads .or. use5005threads .eqs. "define" then bool_dflt="n"
+$ endif
+$ rp = "Use the newer intepreter-based ithreads? [''bool_dflt'] "
$ GOSUB myread
-$ if ans.eqs."" then ans = dflt
-$ if (f$extract(0, 1, "''ans'").eqs."Y").or.(f$extract(0, 1, "''ans'").eqs."y")
+$ use_ithreads=ans
+$ if use_ithreads
$ THEN
-$ use_ithreads="Y"
$ use_5005_threads="N"
$ ELSE
-$ use_ithreads="N"
$ use_5005_threads="Y"
$ ENDIF
-$ ! Are they on VMS 7.1 on an alpha?
-$ if (archname.eqs."VMS_AXP").and.("''f$extract(1,3, f$getsyi(""version""))'".ges."7.1")
+$ ! Are they on VMS 7.1 on an alpha or itanium?
+$ if (archname.nes."VMS_VAX").and.("''f$extract(1,3, f$getsyi(""version""))'".ges."7.1")
$ THEN
$ echo ""
-$ echo "Threaded perl can be linked to use multiple kernel threads
-$ echo "and system upcalls on VMS 7.1+ on Alpha systems. This feature
-$ echo "allows multiple threads to execute simultaneously on an SMP
-$ echo "system as well as preventing a single thread from blocking
-$ echo "all the threads in a program, even on a single-processor
-$ echo "machine. Unfortunately this feature isn't safe on an
-$ echo "unpatched 7.1 system. (Several OS patches were required when
-$ echo "this procedure was written)
-$ dflt = "n"
-$ rp = "Enable multiple kernel threads and upcalls? [''dflt'] "
+$ echo "Threaded perl can be linked to use multiple kernel threads"
+$ echo "and system upcalls on VMS 7.1+ on Alpha systems. This feature"
+$ echo "allows multiple threads to execute simultaneously on an SMP"
+$ echo "system as well as preventing a single thread from blocking"
+$ echo "all the threads in a program, even on a single-processor"
+$ echo "machine. Unfortunately, this feature isn't safe on an"
+$ echo "unpatched 7.1 system (several OS patches were required when"
+$ echo "this procedure was written)."
+$ bool_dflt = "n"
+$ rp = "Enable multiple kernel threads and upcalls? [''bool_dflt'] "
$ gosub myread
-$ if ans.eqs."" then ans="''dflt'"
-$ if f$extract(0, 1, f$edit(ans,"TRIM,COMPRESS,UPCASE")).eqs."Y"
+$ if ans
$ THEN
$ Thread_Live_Dangerously = "MT=MT=1"
$ ENDIF
$ ENDIF
$ ENDIF
$ ENDIF
-$ if archname .eqs. "VMS_AXP"
-$ then
-$!
+$ IF archname .NES. "VMS_VAX"
+$ THEN
$! Case sensitive?
-$ echo ""
-$ echo "By default, perl (and pretty much everything else on VMS) uses
-$ echo "case-insensitive linker symbols. Which is to say, when the
-$ echo "underlying C code makes a call to a routine called Perl_foo in
-$ echo "the source, the name in the object modules or shareable images
-$ echo "is really PERL_FOO. There are some packages that use an
-$ echo "embedded perl interpreter that instead require case-sensitive
-$ echo "linker symbols.
-$ echo ""
-$ echo "If you have no idea what this means, and don't have
-$ echo "any program requiring anything, choose the default.
-$ dflt = be_case_sensitive
-$ rp = "Build with case-sensitive symbols? [''dflt'] "
-$ gosub myread
-$ if ans.eqs."" then ans="''dflt'"
-$ be_case_sensitive = "''ans'"
-$!
+$ echo ""
+$ echo "By default, perl (and pretty much everything else on VMS) uses"
+$ echo "case-insensitive linker symbols. Which is to say, when the"
+$ echo "underlying C code makes a call to a routine called Perl_foo in"
+$ echo "the source, the name in the object modules or shareable images"
+$ echo "is really PERL_FOO. There are some packages that use an"
+$ echo "embedded perl interpreter that instead require case-sensitive"
+$ echo "linker symbols."
+$ echo ""
+$ echo "If you have no idea what this means, and do not have"
+$ echo "any program requiring anything, choose the default."
+$ bool_dflt = be_case_sensitive
+$ if f$type(usecasesensitive) .nes. ""
+$ then
+$ if usecasesensitive .or. usecasesensitive .eqs. "define" then bool_dflt = "y"
+$ if f$extract(0,1,f$edit(usecasesensitive,"collapse,upcase")).eqs."N" .or. usecasesensitive .eqs. "undef" then bool_dflt = "n"
+$ endif
+$ rp = "Build with case-sensitive symbols? [''bool_dflt'] "
+$ GOSUB myread
+$ be_case_sensitive = ans
$! IEEE math?
+$ echo ""
+$ echo "Perl normally uses IEEE format (T_FLOAT) floating point numbers"
+$ echo "internally on Alpha, but if you need G_FLOAT for binary compatibility"
+$ echo "with an external library or existing data, you may wish to disable"
+$ echo "the IEEE math option."
+$ bool_dflt = use_ieee_math
+$ if f$type(useieee) .nes. ""
+$ then
+$ if useieee .or. useieee .eqs. "define"
+$ then
+$ bool_dflt="y"
+$ else
+$ bool_dflt="n"
+$ endif
+$ endif
+$ rp = "Use IEEE math? [''bool_dflt'] "
+$ GOSUB myread
+$ use_ieee_math = ans
+$ ELSE
+$ be_case_sensitive = "n"
+$ use_ieee_math = "n"
+$ ENDIF
+$ useieee = "undef"
+$ usecasesensitive = "undef"
+$ if (use_ieee_math) then useieee = "define"
+$ if (be_case_sensitive) then usecasesensitive = "define"
+$! Unlink all versions?
$ echo ""
-$ echo "Perl normally uses G_FLOAT format floating point numbers
-$ echo "internally, as do most things on VMS. You can, however, build
-$ echo "with IEEE floating point numbers instead if you need to.
-$ dflt = use_ieee_math
-$ rp = "Use IEEE math? [''dflt'] "
-$ gosub myread
-$ if ans.eqs."" then ans="''dflt'"
-$ use_ieee_math = "''ans'"
+$ echo "By default, Perl's unlink() provides VMS-like behavior and only"
+$ echo "deletes the latest version of a file. Enabling this option builds"
+$ echo "Perl so that unlink() deletes all versions of a file."
+$ bool_dflt = unlink_all_versions
+$ if f$type(unlink_all_versions) .nes. ""
+$ then
+$ if unlink_all_versions .or. unlink_all_versions .eqs. "define"
+$ then
+$ bool_dflt="y"
+$ else
+$ bool_dflt="n"
+$ endif
$ endif
+$ rp = "Make unlink() delete all versions of a file? [''bool_dflt'] "
+$ GOSUB myread
+$ unlink_all_versions = ans
+$ IF unlink_all_versions
+$ THEN
+$ d_unlink_all_versions = "define"
+$ ELSE
+$ d_unlink_all_versions = "undef"
+$ ENDIF
$! CC Flags
$ echo ""
-$ echo "You can, if you need to, pass extra flags on to the C
-$ echo "compiler. In general you should only do this if you really,
-$ echo "really know what you're doing.
+$ echo "Your compiler may want other flags. For this question you should include"
+$ echo "/INCLUDE=(whatever) and /DEFINE=(whatever), flags and any other flags"
+$ echo "or qualifiers used by the compiler."
+$ echo ""
+$ echo "To use no flags, specify the word ""none""."
$ dflt = user_c_flags
-$ rp = "Extra C flags [''dflt'] "
-$ gosub myread
-$ if ans.eqs."" then ans="''dflt'"
+$ rp = "Any additional cc flags? [''dflt'] "
+$ GOSUB myread
+$ IF ans .EQS. "none" THEN ans = ""
$ user_c_flags = "''ans'"
$!
$! Ask whether they want to use secure logical translation when tainting
$ echo "logical name translation during parsing of file specifications;"
$ echo "these always use the normal sequence of access modes for logical"
$ echo "name translation."
-$ dflt = "y"
-$ rp = "Use secure logical name translation? [''dflt'] "
+$ bool_dflt = "y"
+$ if f$type(usesecurelog) .nes. ""
+$ then
+$ if f$extract(0,1,f$edit(usesecurelog,"collapse,upcase")).eqs."N" .or. usesecurelog .eqs. "undef" then bool_dflt = "n"
+$ endif
+$ rp = "Use secure logical name translation? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans .eqs. "" THEN ans = dflt
-$ IF ans
-$ THEN d_secintgenv := Y
-$ ELSE d_secintgenv := N
-$ ENDIF
+$ d_secintgenv = ans
+$ usesecurelog = "undef"
+$ if (d_secintgenv) then usesecurelog = "define"
$!
$! Ask whether they want to default filetypes
$ echo ""
$ echo """$ perl foo"" would cause Perl to look for foo., then foo.pl, and"
$ echo "finally foo.com)."
$ echo ""
-$ echo "This is currently broken in some configurations. Only enable it if
-$ echo "you know what you're doing. "
-$ dflt = "n"
-$ rp = "Always use default file types? [''dflt'] "
+$ echo "This is currently broken in some configurations. Only enable it if"
+$ echo "you know what you are doing."
+$ bool_dflt = "n"
+$ if f$type(usedefaulttypes) .nes. ""
+$ then
+$ if usedefaulttypes .or. usedefaulttypes .eqs. "define" then bool_dflt="y"
+$ endif
+$ rp = "Always use default file types? [''bool_dflt'] "
+$ GOSUB myread
+$ d_alwdeftype = ans
+$ usedefaulttypes = "undef"
+$ if (d_alwdeftype) then usedefaulttypes = "define"
+$!
+$! determine whether to use malloc wrapping
+$ echo ""
+$ bool_dflt = "y"
+$ IF F$TYPE(usemallocwrap) .nes. ""
+$ then
+$ if .NOT. usemallocwrap .or. usemallocwrap .eqs. "undef" then bool_dflt = "n"
+$ endif
+$ rp = "Do you wish to wrap malloc calls to protect against potential overflows? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans .EQS. "" THEN ans = dflt
$ IF ans
-$ THEN d_alwdeftype := Y
-$ ELSE d_alwdeftype := N
+$ THEN usemallocwrap = "define"
+$ ELSE usemallocwrap = "undef"
$ ENDIF
$!
$! Ask if they want to use perl's memory allocator
$ echo ""
-$ echo "Perl has a built-in memory allocator that's tuned for perl's
-$ echo "normal memory usage. It's oftentimes better than the standard
-$ echo "system memory allocator. It also has the advantage of providing
-$ echo "memory allocation statistics, if you choose to enable them.
-$ dflt = "n"
-$ rp = "Build with perl's memory allocator? [''dflt'] "
+$ echo "Perl has a built-in memory allocator that is tuned for normal"
+$ echo "memory usage. It is oftentimes better than the standard system"
+$ echo "memory allocator. It also has the advantage of providing memory"
+$ echo "allocation statistics, if you choose to enable them."
+$ bool_dflt = "n"
+$ IF F$TYPE(usemymalloc) .nes. ""
+$ then
+$ if usemymalloc .or. usemymalloc .eqs. "define" then bool_dflt = "y"
+$ endif
+$ rp = "Do you wish to attempt to use the malloc that comes with ''package'? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans .eqs. "" THEN ans = dflt
-$ IF ans
-$ THEN mymalloc := Y
-$ ELSE mymalloc := N
-$ ENDIF
+$ mymalloc = ans
$ IF mymalloc
$ THEN
$ IF use_debugging_perl
$ THEN
$ echo ""
-$ echo "Perl can keep statistics on memory usage if you choose to use
-$ echo "them. This is useful for debugging, but does have some
-$ echo "performance overhead.
-$ dflt = "n"
-$ rp = "Do you want the debugging memory allocator? [''dflt'] "
+$ echo "Perl can keep statistics on memory usage if you choose to use"
+$ echo "them. This is useful for debugging, but does have some"
+$ echo "performance overhead."
+$ bool_dflt = "n"
+$ rp = "Do you want the debugging memory allocator? [''bool_dflt'] "
$ gosub myread
-$ if ans.eqs."" then ans="''dflt'"
-$ use_debugmalloc = f$extract(0, 1, f$edit(ans, "COLLAPSE,UPCASE"))
+$ use_debugmalloc = ans
$ ENDIF
$ ! Check which memory allocator we want
$ echo ""
-$ echo "There are currently three different memory allocators: the
-$ echo "default (which is a pretty good general-purpose memory manager),
-$ echo "the TWO_POT allocator (which is optimized to save memory for
-$ echo "larger allocations), and PACK_MALLOC (which is optimized to save
-$ echo "memory for smaller allocations). They're all good, but if your
-$ echo "usage tends towards larger chunks use TWO_POT, otherwise use
+$ echo "There are currently three different memory allocators: the"
+$ echo "default (which is a pretty good general-purpose memory manager),"
+$ echo "the TWO_POT allocator (which is optimized to save memory for"
+$ echo "larger allocations), and PACK_MALLOC (which is optimized to save"
+$ echo "memory for smaller allocations). They're all good, but if your"
+$ echo "usage tends towards larger chunks use TWO_POT, otherwise use"
$ echo "PACK_MALLOC."
$ dflt = "DEFAULT"
$ rp = "Memory allocator (DEFAULT, TWO_POT, PACK_MALLOC) [''dflt'] "
$ GOSUB myread
-$ if ans.eqs."" then ans = "''dflt'"
$ if ans.eqs."TWO_POT" then use_two_pot_malloc = "Y"
$ if ans.eqs."PACK_MALLOC" then use_pack_malloc = "Y"
$ ENDIF
$!
+$ known_extensions = ""
+$ xxx = ""
+$ OPEN/READ CONFIG 'manifestfound'
+$ext_loop:
+$ READ/END_OF_FILE=end_ext/ERROR=end_ext CONFIG line
+$ IF F$EXTRACT(0,4,line) .NES. "ext/" .AND. -
+ F$EXTRACT(0,8,line) .NES. "vms/ext/" THEN goto ext_loop
+$ line = F$EDIT(line,"COMPRESS")
+$ line = F$ELEMENT(0," ",line)
+$ line_len = F$LENGTH(line)
+$ IF F$EXTRACT(line_len - 12,12,line) .NES. "/Makefile.PL" THEN goto ext_loop
+$ IF F$EXTRACT(0,4,line) .EQS. "ext/" THEN -
+ xxx = F$EXTRACT(4,line_len - 16,line)
+$ IF xxx .EQS. "DynaLoader" THEN goto ext_loop ! omit
+$ IF xxx .EQS. "SDBM_File/sdbm" THEN goto ext_loop ! sub extension - omit
+$ IF xxx .EQS. "Devel/PPPort/harness" THEN goto ext_loop ! sub extension - omit
+$ IF F$EXTRACT(0,7,xxx) .EQS. "Encode/" THEN goto ext_loop ! sub extension - omit
+$ IF xxx .EQS. "B/C" THEN goto ext_loop ! sub extension - omit
+$ IF F$EXTRACT(0,8,line) .EQS. "vms/ext/" THEN -
+ xxx = "VMS/" + F$EXTRACT(8,line_len - 20,line)
+$ known_extensions = known_extensions + " ''xxx'"
+$ goto ext_loop
+$end_ext:
+$ close CONFIG
+$ DELETE/SYMBOL xxx
+$ known_extensions = F$EDIT(known_extensions,"TRIM,COMPRESS")
+$ dflt = known_extensions
+$ IF ccname .NES. "DEC" .AND. ccname .NES. "CXX"
+$ THEN
+$ dflt = dflt - "POSIX" ! not with VAX C or GCC
+$ ENDIF
+$ dflt = dflt - "ByteLoader" ! needs to be ported
+$ dflt = dflt - "DB_File" ! needs to be ported
+$ dflt = dflt - "GDBM_File" ! needs porting/special library
+$ dflt = dflt - "IPC/SysV" ! needs to be ported
+$ dflt = dflt - "NDBM_File" ! needs porting/special library
+$ dflt = dflt - "ODBM_File" ! needs porting/special library
+$ dflt = dflt - "Sys/Syslog" ! needs porting/special library "GDBM_File macro LOG_DEBUG"
+$ IF .NOT. Has_socketshr .AND. .NOT. Has_Dec_C_Sockets
+$ THEN
+$ dflt = dflt - "Socket" ! optional on VMS
+$ ENDIF
+$ IF .NOT. use_threads THEN dflt = dflt - "Thread"
+$ dflt = F$EDIT(dflt,"TRIM,COMPRESS")
+$!
$! Ask for their default list of extensions to build
$ echo ""
-$ echo "It's time to specify which modules you want to build into
-$ echo "perl. Most of these are standard and should be chosen, though
-$ echo "you might, for example, want to build GDBM_File instead of
-$ echo "SDBM_File if you have the GDBM library built on your machine.
-$ echo "Whatever you do, make sure the re module is first or things will
-$ echo "break badly"
-$ echo "
+$ echo "It is time to specify which modules you want to build into"
+$ echo "perl. Most of these are standard and should be chosen, though"
+$ echo "you might, for example, want to build GDBM_File instead of"
+$ echo "SDBM_File if you have the GDBM library built on your machine."
+$ echo ""
$ echo "Which modules do you want to build into perl?"
-$! dflt = "Fcntl Errno File::Glob IO Opcode Byteloader Devel::Peek Devel::DProf Data::Dumper attrs re VMS::Stdio VMS::DCLsym B SDBM_File"
-$ dflt = "re Fcntl Errno File::Glob IO Opcode Devel::Peek Devel::DProf Data::Dumper attrs VMS::Stdio VMS::DCLsym B SDBM_File Storable Thread Sys::Hostname"
-$ if Using_Dec_C
-$ THEN
-$ dflt = dflt + " POSIX"
-$ ENDIF
$ rp = "[''dflt'] "
$ GOSUB myread
-$ if ans.eqs."" then ans = "''dflt'"
-$ a = ""
-$ j = 0
-$ xloop1:
-$ x = f$elem(j," ",ans)
-$ j = j + 1
-$ if x .eqs. " " then goto exloop1
-$ xloop2:
-$ k = f$locate("::",x)
-$ if k .ge. f$len(x) then goto exloop2
-$ x = f$extract(0,k,x) + "/" + f$extract(k+2,f$len(x)-2,x)
-$ goto xloop2
-$ exloop2:
-$ a = a + " " + x
-$ goto xloop1
-$ exloop1:
-$ ans = f$edit(a,"trim")
-$!
-$ a = ""
-$ j = 0
-$ xloop3:
-$ x = f$elem(j," ",dflt)
-$ j = j + 1
-$ if x .eqs. " " then goto exloop3
-$ xloop4:
-$ k = f$locate("::",x)
-$ if k .ge. f$len(x) then goto exloop4
-$ x = f$extract(0,k,x) + "/" + f$extract(k+2,f$len(x)-2,x)
-$ goto xloop4
-$ exloop4:
-$ a = a + " " + x
-$ goto xloop3
-$ exloop3:
-$ dflt = f$edit(a,"trim")
-$!
-$ extensions = "''ans'"
-$ known_extensions = "''dflt'"
+$ extensions = F$EDIT(ans,"TRIM,COMPRESS")
$!
$! %Config-I-VMS, determine build/make utility here (make gmake mmk mms)
$ echo ""
$ probers = "-f Makefile. -v!-f Makefile. -v!-f Makefile. -v!-f Makefile. -v!-f Makefile. -v!/IDENT!/IDENT"
$ max_build = 7
$!
-$ orig_dflt = "MMK"
+$ orig_dflt = f$edit(builder,"UPCASE")
+$ if orig_dflt .eqs. "" then orig_dflt = "MMK"
$ default_set = ""
$ ok_builders = ""
$ OPEN/WRITE/ERROR=Open_error CONFIG Makefile.
$Reenable_messages_build:
$ SET MESSAGE 'messages'
$ SET ON
+$ on control_y then goto clean_up
$ n = n + 1
$ IF (n .LT. max_build) THEN GOTO Build_probe
$!
$ ENDIF
$ ELSE
$ TYPE SYS$INPUT:
+$ DECK
%Config-E-VMS, ERROR:
Well this looks pretty serious. Perl5 cannot be compiled without a "make"
utility of some sort and after checking my "builders" list I cannot find
the symbol or command you use on your system to compile programs.
+$ EOD
$ READ SYS$COMMAND/PROMPT="Which ""MMS"" do you use? " ans
$ ans = F$EDIT(ans,"TRIM, COMPRESS")
$ ans = F$EXTRACT(0,F$LOCATE(" ",ans),ans) !throw out "-f Makefile." here
$ IF (ans .EQS. "")
$ THEN build = dflt
-$ echo "I don't know where 'make' is, and my life depends on it."
+$ echo "I do not know where ""make"" is, and my life depends on it."
$ echo "Go find a make program or fix your DCL$PATH setting!"
$ echo "ABORTING..."
$ SET DEFAULT 'vms_default_directory_name' !be kind rewind
$ ENDIF
$ ENDIF
$!
-$ DELETE/NOLOG Makefile.;
+$ DELETE/NOLOG/NOCONFIRM Makefile.;
$ GOTO Beyond_open
$Open_error:
$ TYPE SYS$INPUT:
+$ DECK
There seems to be trouble. I just tried to create a file in
+$ EOD
$ echo4 'F$ENVIRONMENT("DEFAULT")'
$ TYPE SYS$INPUT:
+$ DECK
but was unsuccessful. I am stopping now. Please check that directories'
PROTECTION bits. I will leave you in the directory where you started
Configure.com
+$ EOD
$ echo4 "ABORTING..."
$ GOTO Clean_up
$ STOP
$!
$!: locate the preferred pager for this system
$!pagers = "most|more|less|type/page"
-$!rp="What pager is used on your system? [''dflt'] "
-$ pager="most"
+$ IF osvers .GES. "V6.1"
+$ THEN
+$ dflt = "type/page=save=10"
+$ ELSE
+$ dflt = "type/page"
+$ ENDIF
+$! assume that the presence of a most symbol indicates the presence
+$! of the pager.
+$ IF F$TYPE(most) .EQS. "STRING" THEN dflt = "most"
+$ IF F$TYPE(pager) .EQS. "STRING" THEN dflt = pager
+$ rp="What pager is used on your system? [''dflt'] "
+$ GOSUB myread
+$ pager = ans
$!
$! update [.vms]config.vms here
$!
$ Makefile_SH = "Makefile.in"
$ ENDIF
$!
-$ IF macros.NES.""
-$ THEN
+$ IF macros .NES. ""
+$ THEN
$ tmp = F$LENGTH(macros)
$ macros = F$EXTRACT(0,(tmp-1),macros) !miss trailing comma
$ macros = "/macro=(" + macros + ")"
$ ENDIF
$! Build up the extra C flags
$!
-$ if use_ieee_math
-$ then
-$ extra_flags = "''extra_flags'" + "/float=ieee/ieee=denorm_results"
-$ endif
-$ if be_case_sensitive
-$ then
+$ IF use_ieee_math
+$ THEN
+$ extra_flags = "''extra_flags'" + "/float=ieee/ieee=denorm"
+$ ENDIF
+$ IF be_case_sensitive
+$ THEN
$ extra_flags = "''extra_flags'" + "/Names=As_Is"
-$ endif
+$ ENDIF
$ extra_flags = "''extra_flags'" + "''user_c_flags'"
$!
$ min_pgflquota = "100000"
$ ENDIF
$ ENDIF
$!
+$! PerlIO abstraction
+$!
+$ bool_dflt = "y"
+$ IF F$TYPE(useperlio) .NES. ""
+$ then
+$ if f$extract(0,1,f$edit(useperlio,"collapse,upcase")) .eqs. "N" .or. useperlio .eqs. "undef" then bool_dflt = "n"
+$ endif
+$ IF .NOT. silent
+$ THEN
+$ echo "Previous versions of ''package' used the standard IO mechanisms as"
+$ TYPE SYS$INPUT:
+$ DECK
+defined in <stdio.h>. Versions 5.003_02 and later of perl allow
+alternate IO mechanisms via the PerlIO abstraction layer, but the
+stdio mechanism is still available if needed. The abstraction layer
+can use AT&T's sfio (if you already have sfio installed) or regular stdio.
+Using PerlIO with sfio may cause problems with some extension modules.
+
+$ EOD
+$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
+$ ENDIF
+$ rp = "Use the PerlIO abstraction layer? [''bool_dflt'] "
+$ GOSUB myread
+$ IF ans
+$ THEN
+$ useperlio = "define"
+$ ELSE
+$ echo "Ok, doing things the stdio way."
+$ useperlio = "undef"
+$ ENDIF
+$!
$ echo ""
$ echo4 "Checking the C run-time library."
$!
$! - also take vms/descrip_mms.template -> descrip.mms (VMS Makefile)
$! vms/Makefile.in -> Makefile. (VMS GNU Makefile?)
$! vms/Makefile.SH -> Makefile. (VMS GNU Makefile?)
-$! - build Build_Ext.Com extension builder procedure.
$!
$! Note for folks from other platforms changing things in here:
$!
$ IF F$LENGTH(Mcc) .EQ. 0 THEN Mcc := "cc"
$ MCC = f$edit(mcc, "UPCASE")
$ C_Compiler_Replace := "CC=CC=''Mcc'''ccflags'"
-$ IF Using_Dec_C
+$ IF ccname .EQS. "DEC"
$ THEN
$ Checkcc := "''Mcc'/prefix=all"
$ ELSE
-$ IF using_cxx
+$ IF ccname .EQS. "CXX"
$ THEN
$ Checkcc := cxx
$ ELSE
$ IF use64bitint .OR. use64bitint .EQS. "define"
$ THEN
$ use64bitint = "define"
-$ uselargefiles = "define"
$ uselongdouble = "define"
+$ alignbytes="16"
$ usemorebits = "define"
+$ ivdformat="""Ld"""
+$ uvuformat="""Lu"""
+$ uvoformat="""Lo"""
+$ uvxformat="""Lx"""
+$ uvXUformat="""LX"""
$ ELSE
$ use64bitint = "undef"
-$ uselargefiles = "undef"
$ uselongdouble = "undef"
$ usemorebits = "undef"
+$ ivdformat="""ld"""
+$ uvuformat="""lu"""
+$ uvoformat="""lo"""
+$ uvxformat="""lx"""
+$ uvXUformat="""lX"""
+$ ENDIF
+$ IF uselongdouble .OR. uselongdouble .EQS. "define"
+$ THEN
+$ nveformat="""Le"""
+$ nvfformat="""Lf"""
+$ nvgformat="""Lg"""
+$ ELSE
+$ nveformat="""e"""
+$ nvfformat="""f"""
+$ nvgformat="""g"""
$ ENDIF
$ IF use64bitall .OR. use64bitall .EQS. "define"
$ THEN
$ ELSE
$ use64bitall = "undef"
$ ENDIF
+$ IF uselargefiles .OR. uselargefiles .EQS. "define"
+$ THEN
+$ uselargefiles = "define"
+$ ELSE
+$ uselargefiles = "undef"
+$ ENDIF
$!
-$ usemymalloc=mymalloc
+$ usemymalloc = "undef"
+$ if mymalloc then usemymalloc = "define"
$!
$ perl_cc=Mcc
$!
-$ IF (sharedperl .AND. F$GETSYI("HW_MODEL") .GE. 1024)
+$ IF (sharedperl .AND. archname .EQS. "VMS_AXP")
$ THEN
$ obj_ext=".abj"
$ so="axe"
$ exe_ext=".axe"
$ lib_ext=".alb"
$ ELSE
-$ obj_ext=".obj"
-$ so="exe"
-$ dlext="exe"
-$ exe_ext=".exe"
-$ lib_ext=".olb"
+$ IF (sharedperl .AND. archname .EQS. "VMS_IA64")
+$ THEN
+$ obj_ext=".ibj"
+$ so="ixe"
+$ dlext="ixe"
+$ exe_ext=".ixe"
+$ lib_ext=".ilb"
+$ ELSE
+$ obj_ext=".obj"
+$ so="exe"
+$ dlext="exe"
+$ exe_ext=".exe"
+$ lib_ext=".olb"
+$ ENDIF
$ ENDIF
$ dlobj="dl_vms''obj_ext'"
$!
-$ cppstdin="''perl_cc'/noobj/preprocess=sys$output sys$input"
+$ cppstdin="''perl_cc'/noobj/comments=as_is/preprocess=sys$output sys$input"
$ cppminus=" "
-$ cpprun="''perl_cc'/noobj/preprocess=sys$output sys$input"
+$ cpprun="''perl_cc'/noobj/comments=as_is/preprocess=sys$output sys$input"
$ cpplast=" "
$!
$ timetype="time_t"
$ ENDIF
$!
$ usedl="define"
-$ startperl="""$ perl 'f$env(\""procedure\"")' 'p1' 'p2' 'p3' 'p4' 'p5' 'p6' 'p7' 'p8' !\n$ exit++ + ++$status != 0 and $exit = $status = undef;"""
+$ startperl="""$ perl 'f$env(\""procedure\"")' \""'"+"'p1'\"" \""'"+"'p2'\"" \""'"+"'p3'\"" \""'"+"'p4'\"" \""'"+"'p5'\"" \""'"+"'p6'\"" \""'"+"'p7'\"" \""'"+"'p8'\""!\n"
+$ startperl=startperl + "$ exit++ + ++$status!=0 and $exit=$status=undef; while($#ARGV != -1 and $ARGV[$#ARGV] eq '"+"'){pop @ARGV;}"""
$!
-$ IF ((Use_Threads) .AND. (vms_ver .LES. "6.2"))
+$ IF ((use_threads) .AND. (vms_ver .LES. "6.2"))
$ THEN
$ libs="SYS$SHARE:CMA$LIB_SHR.EXE/SHARE SYS$SHARE:CMA$RTL.EXE/SHARE SYS$SHARE:CMA$OPEN_LIB_SHR.exe/SHARE SYS$SHARE:CMA$OPEN_RTL.exe/SHARE"
$ ELSE
$ libs=" "
$ ENDIF
-$ IF Using_Dec_C
+$ IF ccname .EQS. "DEC" .OR. ccname .EQS. "CXX"
$ THEN
$ libc="(DECCRTL)"
$ ELSE
$ IF use64bitint .OR. use64bitint .EQS. "define"
$ THEN
$ d_PRId64 = "define"
-$ d_PRIEUldbl = "define"
-$ d_PRIFUldbl = "define"
-$ d_PRIGUldbl = "define"
-$ d_PRIeldbl = "define"
-$ d_PRIfldbl = "define"
-$ d_PRIgldbl = "define"
$ d_PRIu64 = "define"
$ d_PRIo64 = "define"
$ d_PRIx64 = "define"
+$ d_PRIXU64 = "define"
$ sPRId64 = """Ld"""
-$ sPRIEUldbl = """LE"""
-$ sPRIFUldbl = """LF"""
-$ sPRIGUldbl = """LG"""
$ sPRIXU64 = """LX"""
-$ sPRIeldbl = """Le"""
-$ sPRIfldbl = """Lf"""
-$ sPRIgldbl = """Lg"""
$ sPRIi64 = """Li"""
$ sPRIo64 = """Lo"""
$ sPRIu64 = """Lu"""
$ uquadtype = "unsigned long long"
$ quadkind = "QUAD_IS_LONG_LONG"
$ d_frexpl = "define"
+$ d_isnan = "define"
$ d_isnanl = "define"
$ d_modfl = "define"
+$ d_modflproto = "define"
$ ELSE
$ d_PRId64 = "undef"
-$ d_PRIEUldbl = "define"
-$ d_PRIFUldbl = "define"
-$ d_PRIGUldbl = "define"
$ d_PRIXU64 = "undef"
-$ d_PRIeldbl = "define"
-$ d_PRIfldbl = "undef"
-$ d_PRIgldbl = "undef"
$ d_PRIu64 = "undef"
$ d_PRIo64 = "undef"
$ d_PRIx64 = "undef"
$ sPRId64 = ""
-$ sPRIEUldbl = """E"""
-$ sPRIFUldbl = """F"""
-$ sPRIGUldbl = """G"""
$ sPRIXU64 = """lX"""
-$ sPRIeldbl = """e"""
-$ sPRIfldbl = """f"""
-$ sPRIgldbl = """g"""
$ sPRIi64 = ""
$ sPRIo64 = ""
$ sPRIu64 = ""
$ uquadtype = "unsigned long"
$ quadkind = "QUAD_IS_LONG"
$ d_frexpl = "undef"
+$ d_isnan = "undef"
$ d_isnanl = "undef"
$ d_modfl = "undef"
+$ d_modflproto = "undef"
$ ENDIF
-$ d_SCNfldbl = d_PRIfldbl
-$ sSCNfldbl = sPRIfldbl ! expect consistency
$!
$! Now some that we build up
$!
-$ IF Use_Threads
+$ IF use_threads
$ THEN
$ IF use_5005_threads
$ THEN
$ DS := "delete/nolog/noconfirm []try.*;*"
$ Needs_Opt := N
$ good_compile = %X10B90001
-$ IF Using_Gnu_C
+$ IF ccname .EQS. "GCC"
$ THEN
$ open/write OPTCHAN []try.opt
$ write OPTCHAN "Gnu_CC:[000000]gcclib.olb/library"
$ Needs_Opt := Y
$ good_compile = %X10000001
$ ENDIF
-$ IF using_cxx
+$ IF ccname .EQS. "CXX"
$ THEN
$ good_compile = %X15F60001
$ ENDIF
$type_size_check:
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
$ WS "{"
$ WS "printf(""%d\n"", sizeof(''tmp'));"
-$ WS "exit(0);
+$ WS "exit(0);"
$ WS "}"
$ CS
$ GOSUB compile
$findhdr:
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
$ WS "#include <''tmp'>"
-$ WS "int main()
+$ WS "int main()"
$ WS "{"
$ WS "printf(""define\n"");"
-$ WS "exit(0);
+$ WS "exit(0);"
$ WS "}"
$ CS
$ GOSUB link_ok
$! Check for __STDC__
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "#ifdef __STDC__
-$ WS "printf(""42\n"");
-$ WS "#else
-$ WS "printf(""1\n"");
-$ WS "#endif
-$ WS "exit(0);
+$ WS "#ifdef __STDC__"
+$ WS "printf(""42\n"");"
+$ WS "#else"
+$ WS "printf(""1\n"");"
+$ WS "#endif"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ GOSUB compile
$! Check for long double size
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#pragma message disable ALL" ! VAX compilers may have distracting informationals
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "printf(""%d\n"", sizeof(long double));
-$ WS "exit(0);
+$ WS "printf(""%d\n"", sizeof(long double));"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ echo4 "Checking to see if you have long double..."
$ echo "Your long doubles are ''longdblsize' bytes long."
$ ENDIF
$!
+$ IF d_longdbl .OR. d_longdbl .EQS. "define"
+$ THEN
+$ d_PRIEUldbl = "define"
+$ d_PRIFUldbl = "define"
+$ d_PRIGUldbl = "define"
+$ d_PRIeldbl = "define"
+$ d_PRIfldbl = "define"
+$ d_PRIgldbl = "define"
+$ sPRIEUldbl = """LE"""
+$ sPRIFUldbl = """LF"""
+$ sPRIGUldbl = """LG"""
+$ sPRIeldbl = """Le"""
+$ sPRIfldbl = """Lf"""
+$ sPRIgldbl = """Lg"""
+$ ELSE
+$ d_PRIEUldbl = "undef"
+$ d_PRIFUldbl = "undef"
+$ d_PRIGUldbl = "undef"
+$ d_PRIeldbl = "undef"
+$ d_PRIfldbl = "undef"
+$ d_PRIgldbl = "undef"
+$ sPRIEUldbl = ""
+$ sPRIFUldbl = ""
+$ sPRIGUldbl = ""
+$ sPRIeldbl = ""
+$ sPRIfldbl = ""
+$ sPRIgldbl = ""
+$ ENDIF
+$ d_SCNfldbl = d_PRIfldbl
+$ sSCNfldbl = sPRIfldbl ! expect consistency
+$!
$!: check for long long
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "printf(""%d\n"", sizeof(long long));
-$ WS "exit(0);
+$ WS "printf(""%d\n"", sizeof(long long));"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ echo4 "Checking to see if you have long long..."
$!
$ echo "Looking for the type for group ids returned by getgid()."
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "#include <types.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "#include <types.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "gid_t foo;
-$ WS "exit(0);
+$ WS "gid_t foo;"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ GOSUB compile_ok
$!
$ echo "Looking for the type for dev."
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "#include <types.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "#include <types.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "dev_t foo;
-$ WS "exit(0);
+$ WS "dev_t foo;"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ GOSUB compile_ok
$ GOSUB inhdr
$ i_unistd = tmp
$!
+$! do we have getppid()?
+$!
+$ IF i_unistd .EQS. "define"
+$ THEN
+$ OS
+$ WS "#include <stdio.h>"
+$ WS "#include <unistd.h>"
+$ WS "int main() {"
+$ WS "printf(""%d\n"",getppid());"
+$ WS "return(0);"
+$ WS "}"
+$ CS
+$ tmp = "getppid"
+$ GOSUB inlibc
+$ d_getppid = tmp
+$ ELSE
+$ d_getppid = "undef"
+$ ENDIF
+$!
$!: see if this is a libutil.h system
$!
$ tmp = "libutil.h"
$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
$ THEN
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "#include <types.h>
-$ IF i_unistd .EQS. "define" THEN WS "#include <unistd.h>
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "#include <types.h>"
+$ IF i_unistd .EQS. "define" THEN WS "#include <unistd.h>"
$ IF Has_Socketshr
$ THEN
$ WS "#include <socketshr.h>"
$ ELSE
-$ WS "#include <time.h>
-$ WS "#include <socket.h>
+$ WS "#include <time.h>"
+$ WS "#include <socket.h>"
$ ENDIF
-$ WS "int main()
+$ WS "int main()"
$ WS "{"
-$ WS "fd_set *foo;
-$ WS "int bar;
-$ WS "foo = NULL;
-$ WS "bar = select(2, foo, foo, foo, NULL);
-$ WS "exit(0);
+$ WS "fd_set *foo;"
+$ WS "int bar;"
+$ WS "foo = NULL;"
+$ WS "bar = select(2, foo, foo, foo, NULL);"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ GOSUB compile_ok
$!
$ echo "Checking to see how well your C compiler handles fd_set and friends ..."
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "#include <types.h>
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "#include <types.h>"
$ IF Has_Socketshr
$ THEN
$ WS "#include <socketshr.h>"
$ ENDIF
$ IF Has_Dec_C_Sockets
$ THEN
-$ WS "#include <time.h>
-$ WS "#include <socket.h>
+$ WS "#include <time.h>"
+$ WS "#include <socket.h>"
$ ENDIF
-$ WS "int main()
+$ WS "int main()"
$ WS "{"
-$ WS "fd_set *foo;
-$ WS "int bar;
-$ WS "exit(0);
+$ WS "fd_set *foo;"
+$ WS "int bar;"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ GOSUB compile_ok
$!
$ echo4 "Checking to see if you have off64_t..."
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "#include <types.h>
-$ WS "#''i_inttypes IIH
-$ WS "#ifdef IIH
-$ WS "#include <inttypes.h>
-$ WS "#endif
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "#include <types.h>"
+$ WS "#''i_inttypes' IIH"
+$ WS "#ifdef IIH"
+$ WS "#include <inttypes.h>"
+$ WS "#endif"
+$ WS "int main()"
$ WS "{"
-$ WS "off64_t bar;
-$ WS "exit(0);
+$ WS "off64_t bar;"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ GOSUB compile_ok
$!
$ echo4 "Checking to see if you have fpos64_t..."
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "#include <types.h>
-$ WS "#''i_inttypes IIH
-$ WS "#ifdef IIH
-$ WS "#include <inttypes.h>
-$ WS "#endif
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "#include <types.h>"
+$ WS "#''i_inttypes' IIH"
+$ WS "#ifdef IIH"
+$ WS "#include <inttypes.h>"
+$ WS "#endif"
+$ WS "int main()"
$ WS "{"
-$ WS "fpos64_t bar;
-$ WS "exit(0);
+$ WS "fpos64_t bar;"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ GOSUB compile_ok
$!
$ echo4 "Checking to see if you have int64_t..."
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "#include <types.h>
-$ WS "#''i_inttypes IIH
-$ WS "#ifdef IIH
-$ WS "#include <inttypes.h>
-$ WS "#endif
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "#include <types.h>"
+$ WS "#''i_inttypes' IIH"
+$ WS "#ifdef IIH"
+$ WS "#include <inttypes.h>"
+$ WS "#endif"
+$ WS "int main()"
$ WS "{"
-$ WS "int64_t bar;
-$ WS "exit(0);
+$ WS "int64_t bar;"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ GOSUB compile_ok
$ echo "You do not have int64_t."
$ ENDIF
$!
+$! Check to see if fseeko exists
+$!
+$ OS
+$ WS "#include <stdio.h>"
+$ WS "int main()"
+$ WS "{"
+$ WS "FILE *f=NULL;"
+$ WS "fseeko(f,(off_t)0,SEEK_SET);"
+$ WS "return(0);"
+$ WS "}"
+$ CS
+$ tmp = "fseeko"
+$ GOSUB inlibc
+$ d_fseeko = tmp
+$!
+$! Check to see if ftello exists
+$!
+$ OS
+$ WS "#include <stdio.h>"
+$ WS "int main()"
+$ WS "{"
+$ WS "FILE *f=NULL; off_t o=0;"
+$ WS "o=ftello(f);"
+$ WS "return(0);"
+$ WS "}"
+$ CS
+$ tmp = "ftello"
+$ GOSUB inlibc
+$ d_ftello = tmp
+$!
$!: see if this is a netdb.h system
$ IF Has_Dec_C_Sockets
$ THEN
$!
$ echo4 "Checking to see if you have h_errno..."
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ IF i_unistd .EQS. "define" THEN WS "#include <unistd.h>
-$ IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ IF i_unistd .EQS. "define" THEN WS "#include <unistd.h>"
+$ IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "h_errno = 3;
-$ WS "exit(0);
+$ WS "h_errno = 3;"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ GOSUB link_ok
$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
$ THEN
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "#include <types.h>
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "#include <types.h>"
$ IF Has_Socketshr
$ THEN
$ WS "#include <socketshr.h>"
$ ELSE
-$ WS "#include <time.h>
-$ WS "#include <socket.h>
+$ WS "#include <time.h>"
+$ WS "#include <socket.h>"
$ ENDIF
-$ WS "int main()
+$ WS "int main()"
$ WS "{"
-$ WS "char name[100];
-$ WS "int bar, baz;
-$ WS "bar = 100;
-$ WS "baz = gethostname(name, bar);
-$ WS "exit(0);
+$ WS "char name[100];"
+$ WS "int bar, baz;"
+$ WS "bar = 100;"
+$ WS "baz = gethostname(name, bar);"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ GOSUB link_ok
$ GOSUB inhdr
$ i_sysfile = tmp
$!
+$!
+$! Check for sys/ioctl.h
+$!
+$ tmp = "sys/ioctl.h"
+$ GOSUB inhdr
+$ i_sysioctl = tmp
+$!
$! Check for sys/utsname.h
$!
$ tmp = "sys/utsname.h"
$! Check for fcntl
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "#include <fcntl.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "#include <fcntl.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "fcntl(1,2,3);
-$ WS "exit(0);
+$ WS "fcntl(1,2,3);"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "fcntl"
$ GOSUB inlibc
$ d_fcntl = tmp
$!
+$! Check for fcntl locking capability
+$!
+$ echo4 "Checking if fcntl-based file locking works... "
+$ tmp = "undef"
+$ IF d_fcntl .EQS. "define"
+$ THEN
+$ OS
+$ WS "#include <stdio.h>"
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <fcntl.h>"
+$ WS "#include <unistd.h>"
+$ WS "int main() {"
+$ WS "#if defined(F_SETLK) && defined(F_SETLKW)"
+$ WS " struct flock flock;"
+$ WS " int retval, fd;"
+$ WS " fd = open(""try.c"", O_RDONLY);"
+$ WS " flock.l_type = F_RDLCK;"
+$ WS " flock.l_whence = SEEK_SET;"
+$ WS " flock.l_start = flock.l_len = 0;"
+$ WS " retval = fcntl(fd, F_SETLK, &flock);"
+$ WS " close(fd);"
+$ WS " (retval < 0 ? printf(""undef\n"") : printf(""define\n""));"
+$ WS "#else"
+$ WS " printf(""undef\n"");"
+$ WS "#endif"
+$ WS "}"
+$ CS
+$ GOSUB link_ok
+$ IF compile_status .EQ. good_compile .AND. link_status .EQ. good_link
+$ THEN
+$ GOSUB just_mcr_it
+$ IF tmp .EQS. "define"
+$ THEN
+$ echo4 "Yes, it seems to work."
+$ ELSE
+$ echo4 "Nope, it didn't work."
+$ ENDIF
+$ ELSE
+$ echo4 "I'm unable to compile the test program, so I'll assume not."
+$ tmp = "undef"
+$ ENDIF
+$ ELSE
+$ echo4 "Nope, since you don't even have fcntl()."
+$ ENDIF
+$ d_fcntl_can_lock = tmp
+$!
$! Check for memchr
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <string.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <string.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "char * place;
-$ WS "place = memchr(""foo"", 47, 3)
-$ WS "exit(0);
+$ WS "char * place;"
+$ WS "place = memchr(""foo"", 47, 3);"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "memchr"
$! Check for strtoull
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <string.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <string.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "unsigned __int64 result;
-$ WS "result = strtoull(""123123"", NULL, 10);
-$ WS "exit(0);
+$ WS "unsigned __int64 result;"
+$ WS "result = strtoull(""123123"", NULL, 10);"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "strtoull"
$! Check for strtouq
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <string.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <string.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "unsigned __int64 result;
-$ WS "result = strtouq(""123123"", NULL, 10);
-$ WS "exit(0);
+$ WS "unsigned __int64 result;"
+$ WS "result = strtouq(""123123"", NULL, 10);"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "strtouq"
$! Check for strtoll
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <string.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <string.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "__int64 result;
-$ WS "result = strtoll(""123123"", NULL, 10);
-$ WS "exit(0);
+$ WS "__int64 result;"
+$ WS "result = strtoll(""123123"", NULL, 10);"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "strtoll"
$ GOSUB inlibc
$ d_strtoll = tmp
$!
+$! Check for strtoq
+$!
+$ OS
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <string.h>"
+$ WS "int main()"
+$ WS "{"
+$ WS "__int64 result;"
+$ WS "result = strtoq(""123123"", NULL, 10);"
+$ WS "exit(0);"
+$ WS "}"
+$ CS
+$ tmp = "strtoq"
+$ GOSUB inlibc
+$ d_strtoq = tmp
+$!
$! Check for strtold
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <string.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <string.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "long double result;
-$ WS "result = strtold(""123123"", NULL, 10);
-$ WS "exit(0);
+$ WS "long double result;"
+$ WS "result = strtold(""123123"", NULL, 10);"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "strtold"
$! Check for atoll
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <string.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <string.h>"
+$ WS "int main()"
$ WS "{"
-$ WS " __int64 result;
-$ WS "result = atoll(""123123"");
-$ WS "exit(0);
+$ WS " __int64 result;"
+$ WS "result = atoll(""123123"");"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "atoll"
$! Check for atolf
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <string.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <string.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "long double
-$ WS "result = atolf(""123123"");
-$ WS "exit(0);
+$ WS "long double"
+$ WS "result = atolf(""123123"");"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "atolf"
$! Check for access
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "access("foo", F_OK);
-$ WS "exit(0);
+$ WS "access(""foo"", F_OK);"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "acess"
$! Check for bzero
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "#include <strings.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "#include <strings.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "char foo[10];
-$ WS "bzero(foo, 10);
-$ WS "exit(0);
+$ WS "char foo[10];"
+$ WS "bzero(foo, 10);"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "bzero"
$! Check for bcopy
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "#include <strings.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "#include <strings.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "char foo[10], bar[10];
-$ WS "bcopy(""foo"", bar, 3);
-$ WS "exit(0);
+$ WS "char foo[10], bar[10];"
+$ WS "bcopy(""foo"", bar, 3);"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "bcopy"
$! Check for mkstemp
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "mkstemp(""foo"");
-$ WS "exit(0);
+$ WS "mkstemp(""foo"");"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "mkstemp"
$! Check for mkstemps
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "mkstemps(""foo"", 1);
-$ WS "exit(0);
+$ WS "mkstemps(""foo"", 1);"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "mkstemps"
$ GOSUB inlibc
$ d_mkstemps = tmp
$!
-$! Check for iconv
-$!
-$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "#include <iconv.h>
-$ WS "int main()
-$ WS "{"
-$ WS " iconv_t cd = (iconv_t)0;"
-$ WS " char *inbuf, *outbuf;"
-$ WS " size_t inleft, outleft;"
-$ WS " iconv(cd, &inbuf, &inleft, &outbuf, &outleft);"
-$ WS "exit(0);
-$ WS "}"
-$ CS
-$ GOSUB link_ok
-$ IF compile_status .ne. good_compile
-$ THEN
-$ d_iconv="undef"
-$ i_iconv="undef"
-$ ELSE
-$ IF link_status .ne. good_link
-$ THEN
-$ d_iconv="undef"
-$ i_iconv="undef"
-$ ELSE
-$ d_iconv="define"
-$ i_iconv="define"
-$ ENDIF
-$ ENDIF
-$ IF i_iconv .eqs. "define"
-$ THEN echo4 "<iconv.h> found."
-$ ELSE echo4 "<iconv.h> NOT found."
-$ ENDIF
-$!
$! Check for mkdtemp
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "mkdtemp(""foo"");
-$ WS "exit(0);
+$ WS "mkdtemp(""foo"");"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "mkdtemp"
$ GOSUB inlibc
$ d_mkdtemp = tmp
$!
+$! Check for poll
+$!
+$ if i_poll .eqs. "define"
+$ then
+$ OS
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <poll.h>"
+$ WS "int main()"
+$ WS "{"
+$ WS "struct pollfd pfd;"
+$ WS "int count=poll(&pfd,1,0);"
+$ WS "exit(0);"
+$ WS "}"
+$ CS
+$ tmp = "poll"
+$ GOSUB inlibc
+$ d_poll = tmp
+$ else
+$ d_poll = "undef"
+$ endif
+$!
$! Check for setvbuf
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "FILE *foo;
-$ WS "char Buffer[99];
-$ WS "foo = fopen(""foo"", ""r"");
-$ WS "setvbuf(foo, Buffer, 0, 0);
-$ WS "exit(0);
+$ WS "FILE *foo;"
+$ WS "char Buffer[99];"
+$ WS "foo = fopen(""foo"", ""r"");"
+$ WS "setvbuf(foo, Buffer, 0, 0);"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "setvbuf"
$ GOSUB inlibc
$ d_setvbuf = tmp
$!
+$! see if sfio.h is available
+$! see if sfio library is available
+$! Ok, but do we want to use it.
+$! IF F$TYPE(usesfio) .EQS. "" THEN usesfio = "undef"
+$! IF val .EQS. "define"
+$! THEN
+$! IF usesfio .EQS. "define"
+$! THEN dflt = "y"
+$! ELSE dflt = "n"
+$! ENDIF
+$! echo "''package' can use the sfio library, but it is experimental."
+$! IF useperlio .EQS. "undef"
+$! THEN
+$! echo "For sfio also the PerlIO abstraction layer is needed."
+$! echo "Earlier you said you would not want that."
+$! ENDIF
+$! rp="You seem to have sfio available, do you want to try using it? [''dflt'] "
+$! GOSUB myread
+$! IF ans .EQS. "" THEN ans = dflt
+$! IF ans
+$! THEN
+$! echo "Ok, turning on both sfio and PerlIO, then."
+$! useperlio="define"
+$! val="define"
+$! ELSE
+$! echo "Ok, avoiding sfio this time. I'll use stdio instead."
+$! val="undef"
+$! ENDIF
+$! ELSE
+$! IF usesfio .EQS. "define"
+$! THEN
+$! echo4 "Sorry, cannot find sfio on this machine."
+$! echo4 "Ignoring your setting of usesfio=''usesfio'."
+$! val="undef"
+$! ENDIF
+$! ENDIF
+$!
$! Check for setenv
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "setenv(""FOO"", ""BAR"", 0);
-$ WS "exit(0);
+$ WS "setenv(""FOO"", ""BAR"", 0);"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "setenv"
$! Check for setproctitle
$!
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "setproctitle(""%s"", ""FOO"");
-$ WS "exit(0);
+$ WS "setproctitle(""%s"", ""FOO"");"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "setproctitle"
$ IF Has_Dec_C_Sockets .or. Has_Socketshr
$ THEN
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
$ IF Has_Socketshr
$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>
+$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ ENDIF
-$ WS "int main()
+$ WS "int main()"
$ WS "{"
-$ WS "endhostent();
-$ WS "exit(0);
+$ WS "endhostent();"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "endhostent"
$ IF Has_Dec_C_Sockets .or. Has_Socketshr
$ THEN
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
$ IF Has_Socketshr
$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>
+$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ ENDIF
$ WS "int main()"
$ WS "{"
$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
$ THEN
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
$ IF Has_Socketshr
$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>
+$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ ENDIF
-$ WS "int main()
+$ WS "int main()"
$ WS "{"
-$ WS "endprotoent();
-$ WS "exit(0);
+$ WS "endprotoent();"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "endprotoent"
$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
$ THEN
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
$ IF Has_Socketshr
$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>
+$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ ENDIF
-$ WS "int main()
+$ WS "int main()"
$ WS "{"
-$ WS "endservent();
-$ WS "exit(0);
+$ WS "endservent();"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "endservent"
$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
$ THEN
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
$ IF Has_Socketshr
$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>
+$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ ENDIF
-$ WS "int main()
+$ WS "int main()"
$ WS "{"
-$ WS "sethostent(1);
-$ WS "exit(0);
+$ WS "sethostent(1);"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "sethostent"
$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
$ THEN
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
$ IF Has_Socketshr
$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>
+$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ ENDIF
-$ WS "int main()
+$ WS "int main()"
$ WS "{"
-$ WS "setnetent(1);
-$ WS "exit(0);
+$ WS "setnetent(1);"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "setnetent"
$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
$ THEN
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
$ IF Has_Socketshr
$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>
+$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ ENDIF
-$ WS "int main()
+$ WS "int main()"
$ WS "{"
-$ WS "setprotoent(1);
-$ WS "exit(0);
+$ WS "setprotoent(1);"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "setprotoent"
$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
$ THEN
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
$ IF Has_Socketshr
$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>
+$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ ENDIF
-$ WS "int main()
+$ WS "int main()"
$ WS "{"
-$ WS "setservent(1);
-$ WS "exit(0);
+$ WS "setservent(1);"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "setservent"
$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
$ THEN
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
$ IF Has_Socketshr
$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>
+$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ ENDIF
-$ WS "int main()
+$ WS "int main()"
$ WS "{"
-$ WS "gethostent();
-$ WS "exit(0);
+$ WS "gethostent();"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "gethostent"
$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
$ THEN
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
$ IF Has_Socketshr
$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>
+$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ ENDIF
-$ WS "int main()
+$ WS "int main()"
$ WS "{"
-$ WS "getnetent();
-$ WS "exit(0);
+$ WS "getnetent();"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "getnetent"
$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
$ THEN
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
$ IF Has_Socketshr
$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>
+$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ ENDIF
-$ WS "int main()
+$ WS "int main()"
$ WS "{"
-$ WS "getprotoent();
-$ WS "exit(0);
+$ WS "getprotoent();"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "getprotoent"
$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
$ THEN
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
$ IF Has_Socketshr
$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>
+$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ ENDIF
-$ WS "int main()
+$ WS "int main()"
$ WS "{"
-$ WS "getservent();
-$ WS "exit(0);
+$ WS "getservent();"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "getservent"
$ d_getsent="undef"
$ ENDIF
$!
+$! Check for nanosleep
+$!
+$ OS
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <time.h>"
+$ WS "int main()"
+$ WS "{"
+$ WS "int asleep = nanosleep(NULL,NULL);"
+$ WS "exit(0);"
+$ WS "}"
+$ CS
+$ tmp = "nanosleep"
+$ GOSUB inlibc
+$ d_nanosleep = tmp
+$!
$! Check for socklen_t
$!
$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
$ THEN
$ echo4 "Checking to see if you have socklen_t..."
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
$ IF Has_Socketshr
$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>
+$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ ENDIF
-$ WS "int main()
+$ WS "int main()"
$ WS "{"
-$ WS "socklen_t x = 16;
-$ WS "exit(0);
+$ WS "socklen_t x = 16;"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ GOSUB link_ok
$ IF use_threads
$ THEN
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <pthread.h>
-$ WS "#include <stdio.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <pthread.h>"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "pthread_yield();
-$ WS "exit(0);
+$ WS "pthread_yield();"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "pthread_yield"
$ IF use_threads
$ THEN
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <pthread.h>
-$ WS "#include <stdio.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <pthread.h>"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "sched_yield();
-$ WS "exit(0);
+$ WS "sched_yield();"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "sched_yield"
$ sched_yield = " "
$ ENDIF
$!
+$! Check for pthread_attr_setscope and PTHREAD_SCOPE_SYSTEM.
+$! (The actual test is to be written.)
+$!
+$ d_pthread_attr_setscope="undef"
+$!
$! Check for generic pointer size
$!
$ echo4 "Checking to see how big your pointers are..."
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
$ WS "{"
-$ WS "int foo;
-$ WS "foo = sizeof(char *);
-$ WS "printf(""%d\n"", foo);
-$ WS "exit(0);
+$ WS "int foo;"
+$ WS "foo = sizeof(char *);"
+$ WS "printf(""%d\n"", foo);"
+$ WS "exit(0);"
$ WS "}"
$ CS
$ tmp = "char *"
$ sizesize = tmp
$ echo "Your ''zzz' size is ''sizesize' bytes."
$!
+$! Check for _LARGEFILE capability.
+$!
+$ off_t_size = 4
+$ OS
+$ WS "#define _LARGEFILE"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
+$ WS "{"
+$ WS "printf(""%d\n"", sizeof(off_t));"
+$ WS "return(0);"
+$ WS "}"
+$ CS
+$ GOSUB link_ok
+$ IF link_status .EQ. good_link
+$ THEN
+$ GOSUB just_mcr_it
+$ off_t_size = tmp
+$ ENDIF
+$ echo "Your off_t size is ''off_t_size' bytes when _LARGEFILE is defined."
+$ IF off_t_size .ne. 8 .AND. (uselargefiles .OR. uselargefiles .eqs. "define")
+$ THEN
+$ echo4 "You configured with -Duselargefiles but your CRTL does not support _LARGEFILE."
+$ echo4 "I'm disabling large file support."
+$ uselargefiles = "undef"
+$ ENDIF
+$!
+$! Tests for hard link, symbolic links, and 7.3 + CRTL features
+$!
+$ d_lchown = "undef"
+$ d_link = "undef"
+$ d_lstat = "undef"
+$ d_readlink = "undef"
+$ d_symlink = "undef"
+$ d_realpath = "undef"
+$ tmp = f$extract(1,3,f$edit(f$getsyi("VERSION"),"TRIM,COLLAPSE"))
+$!
+$! Hard link support has been present since 7.3-1 except for the
+$! easy to use DCL test to see if hardlinks are enabled on the build
+$! disk. That would require more work to test, and I am only testing
+$! this on 8.2, so that is why the 8.2 test.
+$!
+$ IF (tmp .GES. "8.2") .AND. (f$getsyi("HW_MODEL") .GE. 1024)
+$ THEN
+$ IF f$getdvi("SYS$DISK","HARDLINKS_SUPPORTED")
+$ THEN
+$ echo "I Found 64 bit OpenVMS 8.2 or later, and hard links enabled on build disk."
+$ echo "I will build with hard link support"
+$ d_link = "define"
+$ ELSE
+$ echo "I Found 64 bit OpenVMS 8.2 or later, and hard links disabled on build disk."
+$ echo "I will not build with hard link support."
+$ ENDIF
+$ ELSE
+$ echo4 "I can not dected if your CRTL and build disk support hard links."
+$ echo4 "I am disabling hard link support."
+$ ENDIF
+$!
+$ IF uselargefiles .OR. uselargefiles .eqs. "define"
+$ THEN
+$ IF (tmp .GES. "8.2") .AND. (f$getsyi("HW_MODEL") .GE. 1024)
+$ THEN
+$ echo4 -
+ "Looking for the realpath() function to indicate symbolic link support..."
+$ OS
+$! WS "#include <stdlib.h>"
+$ WS "void exit(int foo);"
+$ WS "char *realpath(const char *file_name, char * resolved_name, ...);"
+$ WS "int main()"
+$ WS "{"
+$ WS "char result[255];"
+$ WS "realpath(""foo"",result);"
+$ WS "exit(0);"
+$ WS "}"
+$ CS
+$ GOSUB link_ok
+$ IF compile_status .EQ. good_compile .AND. link_status .EQ. good_link
+$ THEN
+$ echo -
+ "Found realpath() which indicates symbolic link support is present."
+$ d_lchown = "define"
+$ d_lstat = "define"
+$ d_readlink = "define"
+$ d_symlink = "define"
+$! d_realpath = "define" ! Perl will not put it in the config.h file?
+$! Perl apparently does not use a built in realpath() on other platforms,
+$! but there is a severe performance penatly on OpenVMS to use the Perl
+$! script that implements a realpath(). The d_symlink symbol is used
+$! as a replacement for the d_realpath since they are related and both
+$! were activated by the CRTL at the same time.
+$!
+$ ELSE
+$ echo4 "Your system does not support symbolic links."
+$ echo4 "I am disabling symbolic link support."
+$ ENDIF
+$ ELSE
+$ echo4 "Your system does not support symbolic links."
+$ echo4 "I am disabling symbolic link support."
+$ ENDIF
+$ ELSE
+$ IF (tmp .GES. "8.2") .AND. (f$getsyi("HW_MODEL") .GE. 1024)
+$ THEN
+$ echo4 "-duselargefiles is required for symbolic link support."
+$ echo4 "You did not specify that, so I am disabling symbolic link support."
+$ ENDIF
+$ ENDIF
+$!
+$! VMS V7.3-2 powered options
+$! We know that it is only available for V7.3-2 and later on 64 bit platforms.
+$! Only implementing right now on 8.2 because that is what I am testing.
+$!
+$ d_getgrgid_r = "undef"
+$ getgrgid_r_proto = "0"
+$ d_getgrnam_r = "undef"
+$ getgrnam_r_proto = "0"
+$ d_getpgid = "undef"
+$ d_getpgrp = "undef"
+$ d_getpwnam_r = "undef"
+$ getpwnam_r_proto = "0"
+$ d_getpwuid_r = "undef"
+$ getpwuid_r_proto = "0"
+$ d_setgrent = "undef"
+$ d_ttyname_r = "undef"
+$ ttyname_r_proto = "0"
+$ tmp = f$extract(1,3,f$edit(f$getsyi("VERSION"),"TRIM,COLLAPSE"))
+$ if (tmp .GES. "8.2") .AND. (f$getsyi("HW_MODEL") .GE. 1024)
+$ then
+$ echo "Found 64 bit OpenVMS 8.2, will build with V7.3-2 routines"
+$ d_getgrgid_r = "define"
+$ getgrgid_r_proto = "1"
+$ d_getgrnam_r = "define"
+$ getgrnam_r_proto = "1"
+$ if d_symlink .or. d_symlink .EQS. "define"
+$ then
+$! FIXME: Need to find how to activate this.
+$! d_getpgid = "define"
+$! d_getpgrp = "define"
+$ endif
+$ d_getpwnam_r = "define"
+$ getpwnam_r_proto = "1"
+$ d_getpwuid_r = "define"
+$ getpwuid_r_proto = "1"
+$ d_setgrent = "define"
+$ d_ttyname_r = "define"
+$ ttyname_r_proto = "1"
+$ endif
+$!
+$! VMS V7.3-2 powered options
+$! We know that it is only available for V7.3-2 and later on 64 bit platforms.
+$! Only implementing right now on 8.2 because that is what I am testing
+$! These functions may require POSIX UIDs/GIDs to be active, so I am
+$! not activating the features at this time, just preparing this file
+$! to easily use them in the future.
+$!
+$ d_seteuid = "undef"
+$ d_setpgid = "undef"
+$ d_setpgrp = "undef"
+$ d_setregid = "undef"
+$ d_setreuid = "undef"
+$ d_setsid = "undef"
+$! tmp = f$extract(1,3,f$edit(f$getsyi("VERSION"),"TRIM,COLLAPSE"))
+$tmp = "" ! Disable this section for now.
+$ if (tmp .GES. "8.2") .AND. (f$getsyi("HW_MODEL") .GE. 1024)
+$ then
+$ echo "Found 64 bit OpenVMS 8.2, will build with V7.3-2 UID setting routines"
+$ d_seteuid = "define"
+$ d_setpgid = "define"
+$ d_setpgrp = "define"
+$ d_setregid = "define"
+$ d_setreuid = "define"
+$ d_setsid = "define"
+$ endif
+$!
+$! VMS V8 powered options
+$! We know that it is only available for 8.2 and later on 64 bit platforms.
+$!
+$ d_fstatvfs = "undef"
+$! d_statvfs = "undef"
+$ i_sysstatvfs = "undef"
+$ tmp = f$extract(1,3,f$edit(f$getsyi("VERSION"),"TRIM,COLLAPSE"))
+$ if (tmp .GES. "8.2") .AND. (f$getsyi("HW_MODEL") .GE. 1024)
+$ then
+$ echo "Found 64 bit OpenVMS 8.2, will build with 8.2 routines"
+$ d_fstatvfs = "define"
+$! d_statvfs = "define"
+$ i_sysstatvfs = "define"
+$ endif
+$!
$! Check rand48 and its ilk
$!
$ echo4 "Looking for a random number function..."
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
$ WS "{"
$ WS "srand48(12L);"
-$ WS "exit(0);
+$ WS "exit(0);"
$ WS "}"
$ CS
$ GOSUB link_ok
$ IF compile_status .EQ. good_compile .AND. link_status .EQ. good_link
$ THEN
$ drand01 = "drand48()"
+$ randbits = "48"
+$ randfunc = "drand48"
$ randseedtype = "long int"
$ seedfunc = "srand48"
$ echo4 "Good, found drand48()."
$ ELSE
$ d_drand48proto = "undef"
$ drand01="random()"
+$ randbits = "31"
+$ randfunc = "random"
$ randseedtype = "unsigned"
$ seedfunc = "srandom"
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "int main()
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
$ WS "{"
$ WS "srandom(12);"
-$ WS "exit(0);
+$ WS "exit(0);"
$ WS "}"
$ CS
$ GOSUB link_ok
$ THEN
$ echo4 "OK, found random()."
$ ELSE
-$ drand01="(((float)rand())/((float)RAND_MAX))"
+$ drand01="(((float)rand())*MY_INV_RAND_MAX)"
+$ randfunc = "rand"
$ randseedtype = "unsigned"
$ seedfunc = "srand"
$ echo4 "Yick, looks like I have to use rand()."
$ ENDIF
$ ENDIF
-$!
$! Done with compiler checks. Clean up.
$ IF F$SEARCH("try.c") .NES."" THEN DELETE/NOLOG/NOCONFIRM try.c;*
$ IF F$SEARCH("try.obj").NES."" THEN DELETE/NOLOG/NOCONFIRM try.obj;*
$ IF F$SEARCH("try.exe").NES."" THEN DELETE/NOLOG/NOCONFIRM try.exe;*
$ IF F$SEARCH("try.opt").NES."" THEN DELETE/NOLOG/NOCONFIRM try.opt;*
$ IF F$SEARCH("try.out").NES."" THEN DELETE/NOLOG/NOCONFIRM try.out;*
-$ IF using_cxx
+$ IF ccname .EQS. "CXX"
$ THEN
$ CALL Cxx_demangler_cleanup
$ ENDIF
$! Some that are compiler or VMS version sensitive
$!
$! Gnu C stuff
-$ IF Using_Gnu_C
+$ IF ccname .EQS. "GCC"
$ THEN
$ d_attribut="define"
$ vms_cc_type="gcc"
$ ENDIF
$!
$! Dec C >= 5.2 and VMS ver >= 7.0
-$ IF (Using_Dec_C).AND.(F$INTEGER(Dec_C_Version).GE.50200000).AND.(vms_ver .GES. "7.0")
+$ IF (ccname .EQS. "DEC") .AND. -
+ (F$INTEGER(Dec_C_Version).GE.50200000) .AND. (vms_ver .GES. "7.0")
$ THEN
$ d_bcmp="define"
+$ d_getitimer="define"
$ d_gettimeod="define"
+$ d_mmap="define"
+$ d_mprotect="define"
+$ d_munmap="define"
+$ d_msync="define"
+$ d_ualarm="define"
$ d_uname="define"
+$ d_usleep="define"
+$ d_setitimer="define"
$ d_sigaction="define"
+$ d_sigprocmask="define"
$ d_truncate="define"
$ d_wait4="define"
$ d_index="define"
$ pidtype="pid_t"
-$ sig_name="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM ABRT USR1 USR2 SPARE18 SPARE19 CHLD CONT STOP TSTP TTIN TTOU DEBUG SPARE27 SPARE28 SPARE29 SPARE30 SPARE31 SPARE32 RTMIN RTMAX"",0"
+$ sig_name1="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM "
+$ sig_name2="TERM ABRT USR1 USR2 SPARE18 SPARE19 CHLD CONT STOP TSTP TTIN TTOU "
+$ sig_name3="DEBUG SPARE27 SPARE28 SPARE29 SPARE30 SPARE31 SPARE32 "
+$ sig_name4="WINCH "
+$ sig_namert="RTMIN RTMAX"
$ psnwc1="""ZERO"",""HUP"",""INT"",""QUIT"",""ILL"",""TRAP"",""IOT"",""EMT"",""FPE"",""KILL"",""BUS"",""SEGV"",""SYS"","
$ psnwc2="""PIPE"",""ALRM"",""TERM"",""ABRT"",""USR1"",""USR2"",""SPARE18"",""SPARE19"",""CHLD"",""CONT"",""STOP"",""TSTP"","
-$ psnwc3="""TTIN"",""TTOU"",""DEBUG"",""SPARE27"",""SPARE28"",""SPARE29"",""SPARE30"",""SPARE31"",""SPARE32"",""RTMIN"",""RTMAX"",0"
-$ sig_name_init = psnwc1 + psnwc2 + psnwc3
-$ sig_num="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 64"","0"
-$ sig_num_init="0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,6,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,64,0"
-$! perl_sig_num_with_commas=sig_num_init
+$ psnwc3="""TTIN"",""TTOU"",""DEBUG"",""SPARE27"",""SPARE28"",""SPARE29"",""SPARE30"",""SPARE31"",""SPARE32"","
+$ psnwc4_v7_3="""WINCH"","
+$ psnwcrt="""RTMIN"",""RTMAX"",0"
+$ sig_num1="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 "
+$ sig_num_v7_3="28 "
+$ sig_numrt="33 64"
+$ sig_num_init1="0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,6,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,"
+$ sig_num_init_v7_3="28,"
+$ sig_num_initrt="33,64,0"
+$ if (vms_ver .GES. "7.3")
+$ then
+$ sig_name = sig_name1 + sig_name2 + sig_name3 + sig_name4 + sig_namert
+$ sig_name_init = psnwc1 + psnwc2 + psnwc3 + psnwc4_v7_3 + psnwcrt
+$ sig_num = sig_num1 + sig_num_v7_3 + sig_numrt
+$ sig_num_init = sig_num_init1 + sig_num_v7_3 + sig_num_initrt
+$ sig_size="37"
+$ else
+$ sig_name = sig_name1 + sig_name2 + sig_name3 + sig_namert
+$ sig_name_init = psnwc1 + psnwc2 + psnwc3 + psnwcrt
+$ sig_num = sig_num1 + sig_numrt
+$ sig_num_init = sig_num_init1 + sig_num_initrt
+$ sig_size="36"
+$ endif
+$ sig_count="64"
$ uidtype="uid_t"
$ d_pathconf="define"
$ d_fpathconf="define"
$ d_sigsetjmp="define"
$ ELSE
$ pidtype="unsigned int"
-$ d_gettimeod="undef"
$ d_bcmp="undef"
+$ d_getitimer="undef"
+$ d_gettimeod="undef"
+$ d_mmap="undef"
+$ d_mprotect="undef"
+$ d_munmap="undef"
+$ d_msync="undef"
+$ d_ualarm="undef"
$ d_uname="undef"
+$ d_usleep="undef"
+$ d_setitimer="undef"
$ d_sigaction="undef"
+$ d_sigprocmask="undef"
$ d_truncate="undef"
$ d_wait4="undef"
$ d_index="undef"
-$ sig_name="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM ABRT USR1 USR2"",0"
+$ sig_name="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM ABRT USR1 USR2"
$ psnwc1="""ZERO"",""HUP"",""INT"",""QUIT"",""ILL"",""TRAP"",""IOT"",""EMT"",""FPE"",""KILL"",""BUS"",""SEGV"",""SYS"","
$ psnwc2="""PIPE"",""ALRM"",""TERM"",""ABRT"",""USR1"",""USR2"",0"
$ sig_name_init = psnwc1 + psnwc2
-$ sig_num="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6 16 17"",0"
+$ sig_num="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6 16 17"
$ sig_num_init="0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,6,16,17,0"
-$! perl_sig_num_with_commas=sig_num_init
+$ sig_size="19"
+$ sig_count="15"
+$ if (vms_ver .GES. "6.2") then sig_count="17"
$ uidtype="unsigned int"
$ d_pathconf="undef"
$ d_fpathconf="undef"
$ d_sysconf="undef"
$ d_sigsetjmp="undef"
$ ENDIF
+$!: see if tzname[] exists
+$ OS
+$ WS "#include <stdio.h>"
+$ WS "#include <time.h>"
+$ WS "int main() { extern short tzname[]; printf(""%hd"", tzname[0]); }"
+$ CS
+$ GOSUB compile_ok
+$ IF compile_status .EQ. good_compile
+$ THEN
+$ d_tzname = "undef"
+$ echo4 "tzname[] NOT found."
+$ ELSE
+$ d_tzname = "define"
+$ echo4 "tzname[] found."
+$ ENDIF
+$ IF F$SEARCH("try.obj") .NES. "" THEN DELETE/NOLOG/NOCONFIRM try.obj;
+$!
+$ IF d_gethname .EQS. "undef" .AND. d_uname .EQS. "undef"
+$ THEN
+$ d_phostname="define"
+$ ELSE
+$ d_phostname="undef"
+$ ENDIF
$!
$! Dec C alone
-$ IF Using_Dec_C
+$ IF ccname .EQS. "DEC"
$ THEN
$ d_mbstowcs="define"
$ d_mbtowc="define"
$ d_stdio_cnt_lval="define"
$ d_stdio_ptr_lval="define"
$ d_stdstdio="define"
+$ d_faststdio="define"
$ d_wcstombs="define"
$ d_mblen="define"
$ d_mktime="define"
$ d_strxfrm="define"
$ d_wctomb="define"
$ i_locale="define"
+$ i_langinfo="define"
$ d_locconv="define"
+$ IF vms_ver .GES. "6.2"
+$ THEN
+$ d_nl_langinfo="define"
+$ ELSE
+$ d_nl_langinfo="undef"
+$ ENDIF
$ d_setlocale="define"
$ vms_cc_type="decc"
$ ELSE
$ d_stdio_cnt_lval="undef"
$ d_stdio_ptr_lval="undef"
$ d_stdstdio="undef"
+$ d_faststdio="undef"
$ d_wcstombs="undef"
$ d_mblen="undef"
$ d_mktime="undef"
$ d_strxfrm="undef"
$ d_wctomb="undef"
$ i_locale="undef"
+$ i_langinfo="undef"
$ d_locconv="undef"
+$ d_nl_langinfo="undef"
$ d_setlocale="undef"
$ ENDIF
+$ d_stdio_ptr_lval_sets_cnt="undef"
+$ d_stdio_ptr_lval_nochange_cnt="define"
+$ usefaststdio="undef"
$!
$! Sockets?
$ if Has_Socketshr .OR. Has_Dec_C_Sockets
$ d_vms_do_sockets="define"
$ d_htonl="define"
$ d_socket="define"
+$ d_sockpair = "undef"
+$ tmp = f$extract(1,3,f$edit(f$getsyi("VERSION"),"TRIM,COLLAPSE"))
+$ if (tmp .GES. "8.2") .AND. (f$getsyi("HW_MODEL") .GE. 1024)
+$ then
+$ echo "Found 64 bit OpenVMS 8.2, will build with socketpair support"
+$ d_sockpair = "define"
+$ endif
$ d_select="define"
$ netdb_hlen_type="int"
$ netdb_host_type="char *"
$ d_getnetprotos="define"
$ d_getprotoprotos="define"
$ d_getservprotos="define"
-$ IF Using_Dec_C
+$ IF ccname .EQS. "DEC" .OR. ccname .EQS. "CXX"
$ THEN
$ socksizetype="unsigned int"
$ ELSE
$ d_vms_do_sockets="undef"
$ d_htonl="undef"
$ d_socket="undef"
+$ d_socketpair = "undef"
$ d_select="undef"
$ netdb_hlen_type="int"
$ netdb_host_type="char *"
$ GOSUB type_size_check
$ longsize = tmp
$ ENDIF
-$
+$!
$ tmp = "''uvtype'"
$ GOSUB type_size_check
$ uvsize = tmp
$ IF use64bitint .OR. use64bitint .EQS. "define" THEN u64size = tmp
-$
+$!
$ tmp = "''i8type'"
$ GOSUB type_size_check
$ i8size = tmp
-$
+$!
$ tmp = "''u8type'"
$ GOSUB type_size_check
$ u8size = tmp
-$
+$!
$ tmp = "''i16type'"
$ GOSUB type_size_check
$ i16size = tmp
$ gosub type_size_check
$ shortsize = tmp
$ ENDIF
-$
+$!
$ tmp = "''u16type'"
$ GOSUB type_size_check
$ u16size = tmp
-$
+$!
$ tmp = "''i32type'"
$ GOSUB type_size_check
$ i32size = tmp
$ gosub type_size_check
$ intsize = tmp
$ ENDIF
-$
+$!
$ tmp = "''u32type'"
$ gosub type_size_check
$ u32size = tmp
-$
+$!
$ tmp = "''nvtype'"
$ GOSUB type_size_check
$ nvsize = tmp
$!
$ echo4 "Checking whether your NVs can preserve your UVs..."
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "int main() {
-$ WS " ''uvtype' k = (''uvtype')~0, l;
-$ WS " ''nvtype' d;
-$ WS " l = k;
-$ WS " d = (''nvtype')l;
-$ WS " l = (''uvtype')d;
-$ WS " if (l == k)
-$ WS " printf(""preserve\n"");
-$ WS " exit(0);
-$ WS "}
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "int main() {"
+$ WS " ''uvtype' k = (''uvtype')~0, l;"
+$ WS " ''nvtype' d;"
+$ WS " l = k;"
+$ WS " d = (''nvtype')l;"
+$ WS " l = (''uvtype')d;"
+$ WS " if (l == k)"
+$ WS " printf(""preserve\n"");"
+$ WS " exit(0);"
+$ WS "}"
$ CS
$ GOSUB compile
$ IF tmp .EQS. "preserve"
$ THEN
$ d_nv_preserves_uv = "define"
$ echo "Yes, they can."
-$ d_nv_preserves_uv_bits = F$STRING(F$INTEGER(uvsize) * 8)
+$ nv_preserves_uv_bits = F$STRING(F$INTEGER(uvsize) * 8)
$ ELSE
$ d_nv_preserves_uv = "undef"
$ echo "No, they can't."
$ echo4 "Checking how many bits of your UVs your NVs can preserve..."
$ OS
-$ WS "#ifdef __DECC
-$ WS "#include <stdlib.h>
-$ WS "#endif
-$ WS "#include <stdio.h>
-$ WS "int main() {
-$ WS " ''uvtype' u = 0;
-$ WS " int n = 8 * ''uvsize';
-$ WS " int i;
-$ WS " for (i = 0; i < n; i++) {
-$ WS " u = u << 1 | (''uvtype')1;
-$ WS " if ((''uvtype')(''nvtype')u != u)
-$ WS " break;
-$ WS " }
-$ WS " printf(""%d\n"", i);
-$ WS " exit(0);
-$ WS "}
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <stdio.h>"
+$ WS "int main() {"
+$ WS " ''uvtype' u = 0;"
+$ WS " int n = 8 * ''uvsize';"
+$ WS " int i;"
+$ WS " for (i = 0; i < n; i++) {"
+$ WS " u = u << 1 | (''uvtype')1;"
+$ WS " if ((''uvtype')(''nvtype')u != u)"
+$ WS " break;"
+$ WS " }"
+$ WS " printf(""%d\n"", i);"
+$ WS " exit(0);"
+$ WS "}"
+$ CS
$ GOSUB compile
-$ d_nv_preserves_uv_bits = tmp
+$ nv_preserves_uv_bits = tmp
+$ ENDIF
+$!
+$ echo4 "Checking if kill() uses SYS$FORCEX or can't be called from a signal handler..."
+$ kill_by_sigprc = "undef"
+$ OS
+$ WS "#include <stdio.h>"
+$ WS "#include <signal.h>"
+$ WS "#include <unistd.h>"
+$ WS "void handler1(int s) { printf(""%d"",s); kill(getpid(),2); }"
+$ WS "void handler2(int s) { printf(""%d"",s); }"
+$ WS "main(){"
+$ WS " printf(""0"");"
+$ WS " signal(1,handler1);"
+$ WS " signal(2,handler2);"
+$ WS " kill(getpid(),1);"
+$ WS " sleep(1);"
+$ WS " printf(""\n"");"
+$ WS "}"
+$ CS
+$ ON ERROR THEN CONTINUE
+$ GOSUB compile
+$ IF tmp .NES. "012"
+$ THEN
+$ echo4 "Yes, it has at least one of those limitations."
+$ echo4 "Checking whether we can use SYS$SIGPRC instead..."
+$ OS
+$ WS "#include <stdio.h>"
+$ WS "#include <lib$routines.h>"
+$ WS "unsigned long code = 0;"
+$ WS "int handler(unsigned long *args) {"
+$ WS " code = args[1];"
+$ WS " return 1;"
+$ WS "}"
+$ WS "main() { "
+$ WS " int iss, sys$sigprc();"
+$ WS " lib$establish(handler);"
+$ WS " iss = sys$sigprc(0,0,0x1234);"
+$ WS " iss = ((iss&1)==1 && code == 0x1234);"
+$ WS " printf(""%d\n"",iss);"
+$ WS "}"
+$ CS
+$ ON ERROR THEN CONTINUE
+$ GOSUB compile
+$ IF tmp .EQS. "1"
+$ THEN
+$ echo4 "Yep, we can."
+$ kill_by_sigprc = "define"
+$!
+$! since SIGBUS and SIGSEGV indistinguishable, make them the same here.
+$! sigusr1 and sigusr2 show up in VMS6.2 and later
+$!
+$ if vms_ver .GES. "6.2"
+$ then
+$ sig_name="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM ABRT USR1 USR2"
+$ psnwc1="""ZERO"",""HUP"",""INT"",""QUIT"",""ILL"",""TRAP"",""IOT"",""EMT"",""FPE"",""KILL"",""BUS"",""SEGV"",""SYS"","
+$ psnwc2="""PIPE"",""ALRM"",""TERM"",""ABRT"",""USR1"",""USR2"",0"
+$ sig_name_init = psnwc1 + psnwc2
+$ sig_num="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6 16 17"
+$ sig_num_init="0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,6,16,17,0"
+$ sig_size="19"
+$ sig_count="17"
+$ else
+$ sig_name="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM ABRT"
+$ psnwc1="""ZERO"",""HUP"",""INT"",""QUIT"",""ILL"",""TRAP"",""IOT"",""EMT"",""FPE"",""KILL"",""BUS"",""SEGV"",""SYS"","
+$ psnwc2="""PIPE"",""ALRM"",""TERM"",""ABRT"",0"
+$ sig_name_init = psnwc1 + psnwc2
+$ sig_num="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6"
+$ sig_num_init="0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,6,0"
+$ sig_size="17"
+$ sig_count="15"
+$ endif
+$ ELSE
+$ echo4 "Nope, we can't."
+$ ENDIF
+$ ELSE
+$ echo4 "Nope, it doesn't."
$ ENDIF
$ DELETE/SYMBOL tmp
$!
-$ ivdformat="""ld"""
-$ uvuformat="""lu"""
-$ uvoformat="""lo"""
-$ uvxformat="""lx"""
-$! uselongdouble?
-$ nveformat="""e"""
-$ nvfformat="""f"""
-$ nvgformat="""g"""
-$!
$! Finally the composite ones. All config
$!
$ myuname="''osname' ''myname' ''osvers' ''F$EDIT(hwname, "TRIM")'"
$!
-$ IF Using_Dec_C
+$ IF ccname .EQS. "DEC"
+$ THEN
+$ ccflags="/Include=[]/Standard=Relaxed_ANSI/Prefix=All/Obj=''obj_ext' ''ccflags'"
+$ ENDIF
+$ i_dirent = "undef"
+$ IF ccname .EQS. "CXX"
$ THEN
-$ ccflags="/Include=[]/Standard=Relaxed_ANSI/Prefix=All/Obj=''obj_ext'/NoList''ccflags'"
+$ i_dirent = "define"
+$ ccflags="/Include=[]/Standard=ANSI/Prefix=All/Obj=''obj_ext' ''ccflags'"
$ ENDIF
$ IF use_vmsdebug_perl
$ THEN
-$ optimize="/Debug/NoOpt"
+$ optimize="/List/Debug/NoOpt"
+$ ldflags="/Debug/Trace/Map"
$ dbgprefix = "DBG"
$ ELSE
-$ optimize= ""
+$ optimize= "/NoList"
+$ ldflags="/NoTrace/NoMap"
$ dbgprefix = ""
$ ENDIF
$!
$! Okay, we've got everything configured. Now go write out a config.sh.
$ basename_config_sh = F$PARSE(config_sh,,,"NAME",)+F$PARSE(config_sh,,,"TYPE",)
$ echo4 "Creating ''basename_config_sh'..."
-$ open/write CONFIG 'config_sh
+$ open/write CONFIG 'config_sh'
$ WC := write CONFIG
$!
$! ##BEGIN WRITE NEW CONSTANTS HERE##
$ WC "# Configuration by : " + cf_by
$ WC "# Target system : " + myuname
$ WC ""
-$ WC "CONFIG='true'"
$ WC "Makefile_SH='" + Makefile_SH + "'"
$ WC "Mcc='" + Mcc + "'"
-$! WC "PERL_SUBVERSION='" + subversion + "'" ! VMS specific to descrip_mms.template
-$ WC "PERL_VERSION='" + patchlevel + "'" ! VMS specific to descrip_mms.template
+$ WC "PERL_REVISION='" + revision + "'"
+$ WC "PERL_VERSION='" + patchlevel + "'"
+$ WC "PERL_SUBVERSION='" + subversion + "'"
+$ WC "PERL_API_REVISION='" + api_revision + "'"
+$ WC "PERL_API_VERSION='" + api_version + "'"
+$ WC "PERL_API_SUBVERSION='" + api_subversion + "'"
+$ WC "PERL_PATCHLEVEL='" + perl_patchlevel + "'"
+$ WC "PERL_CONFIG_SH='true'"
+$ WC "_a='" + lib_ext + "'"
+$ WC "_exe='" + exe_ext + "'"
+$ WC "_o='" + obj_ext + "'"
$ WC "alignbytes='" + alignbytes + "'"
-$ WC "aphostname='" + "'"
+$ WC "aphostname='write sys$output f$edit(f$getsyi(\""SCSNODE\""),\""TRIM,LOWERCASE\"")'"
$ WC "ar='" + "'"
$ WC "archlib='" + archlib + "'"
$ WC "archlibexp='" + archlibexp + "'"
$ WC "cc='" + perl_cc + "'"
$ WC "cccdlflags='" + cccdlflags + "'"
$ WC "ccdlflags='" + ccdlflags + "'"
-$ WC "ccflags='" + ccflags + "'"
-$ WC "ccversion='" + ccversion + "'" ! VMS specific, oddly enough
+$ IF uselargefiles .OR. uselargefiles .EQS. "define"
+$ THEN
+$! Perl can not use _USE_STD_STAT at the moment
+$! IF d_symlink .OR. d_symlink .EQS. "define"
+$! THEN
+$! ccdefines = "_USE_STD_STAT=1"
+$! ELSE
+$ ccdefines = "_LARGEFILE=1"
+$! ENDIF
+$ ENDIF
+$ IF ccdefines .NES. ""
+$ THEN
+$ WC "ccflags='" + ccflags + "/Define=" + ccdefines + "'"
+$ ELSE
+$ WC "ccflags='" + ccflags + "'"
+$ ENDIF
+$ WC "ccflags_uselargefiles='" + "'"
+$ WC "ccname='" + ccname + "'"
+$ WC "ccversion='" + ccversion + "'"
$ WC "cf_by='" + cf_by + "'"
$ WC "cf_email='" + cf_email + "'"
$ WC "cf_time='" + cf_time + "'"
$ WC "cppminus='" + cppminus + "'"
$ WC "cpprun='" + cpprun + "'"
$ WC "cppstdin='" + cppstdin + "'"
-$ WC "crosscompile='undef'"
-$ WC "d_Gconvert='my_gconvert(x,n,t,b)'"
-$ WC "d_PRId64='" + d_PRId64 + "'"
+$ IF use64bitint .OR. use64bitint .EQS. "define"
+$ THEN
+$! gcvt() does not work for > 16 decimal places; fallback to sprintf
+$ WC "d_Gconvert='sprintf((b),""%.*" + (nvgformat-"""") + ",(n),(x))'"
+$ ELSE
+$ WC "d_Gconvert='my_gconvert(x,n,t,b)'"
+$ ENDIF
$ WC "d_PRIEldbl='" + d_PRIEUldbl + "'"
$ WC "d_PRIFldbl='" + d_PRIFUldbl + "'"
$ WC "d_PRIGldbl='" + d_PRIGUldbl + "'"
-$ WC "d_PRIX64='" + d_PRIXU64 + "'"
+$ WC "d_PRIXU64='" + d_PRIXU64 + "'"
+$ WC "d_PRId64='" + d_PRId64 + "'"
$ WC "d_PRIeldbl='" + d_PRIeldbl + "'"
$ WC "d_PRIfldbl='" + d_PRIfldbl + "'"
$ WC "d_PRIgldbl='" + d_PRIgldbl + "'"
$ WC "d_PRIu64='" + d_PRIu64 + "'"
$ WC "d_PRIx64='" + d_PRIx64 + "'"
$ WC "d_SCNfldbl='" + d_SCNfldbl + "'"
+$ WC "d__fwalk='undef'"
$ WC "d_access='" + d_access + "'"
$ WC "d_accessx='undef'"
+$ WC "d_aintl='undef'"
$ WC "d_alarm='define'"
$ WC "d_archlib='define'"
$ WC "d_atolf='" + d_atolf + "'"
$ WC "d_atoll='" + d_atoll + "'"
-$ WC "d_attribut='" + d_attribut + "'"
+$ WC "d_attribute_format='" + d_attribut + "'"
+$ WC "d_attribute_malloc='undef'"
+$ WC "d_attribute_nonnull='undef'"
+$ WC "d_attribute_noreturn='undef'"
+$ WC "d_attribute_pure='undef'"
+$ WC "d_attribute_unused='undef'"
+$ WC "d_attribute_warn_unused_result='undef'"
$ WC "d_bcmp='" + d_bcmp + "'"
$ WC "d_bcopy='" + d_bcopy + "'"
$ WC "d_bincompat3='undef'"
-$ WC "d_bincompat5005='undef'"
-$ WC "d_bsdgetpgrp='undef'"
$! WC "d_bsdpgrp='undef'"
+$ WC "d_bsdgetpgrp='undef'"
$ WC "d_bsdsetpgrp='undef'"
$ WC "d_bzero='" + d_bzero + "'"
$ WC "d_casti32='define'"
$ WC "d_chown='define'"
$ WC "d_chroot='undef'"
$ WC "d_chsize='undef'"
+$ WC "d_class='undef'"
$ WC "d_cmsghdr_s='undef'"
$ WC "d_const='define'"
+$ WC "d_copysignl='define'"
$ WC "d_crypt='define'"
$ WC "d_csh='undef'"
$ WC "d_cuserid='define'"
$ WC "d_dbl_dig='define'"
+$ WC "d_dbminitproto='undef'"
$ WC "d_difftime='define'"
-$ WC "d_dirnamlen='define'"
+$ WC "d_dirfd='undef'"
+$ tmp = f$extract(1,3,f$edit(f$getsyi("VERSION"),"TRIM,COLLAPSE"))
+$ IF (tmp .GES. "8.2") .AND. (f$getsyi("HW_MODEL") .GE. 1024)
+$ then
+$! Sorry, CRTL does not have this, and in order to support
+$! POSIX filespecifications, the CRTL readdir() structures
+$! need to be used globaly for now.
+$ echo "Building for OpenVMS 8.2 uses CRTL dirent.h, so no dirnamlen member"
+$ WC "d_dirnamlen='undef'"
+$ else
+$ WC "d_dirnamlen='define'"
+$ endif
$ WC "d_dlerror='undef'"
$ WC "d_dlsymun='undef'"
$ WC "d_dosuid='undef'"
$ WC "d_eofnblk='undef'"
$ WC "d_eunice='undef'"
$ WC "d_fchmod='undef'"
+$ WC "d_fchdir='undef'"
$ WC "d_fchown='undef'"
$ WC "d_fcntl='" + d_fcntl + "'"
+$ WC "d_fcntl_can_lock='" + d_fcntl_can_lock + "'"
$ WC "d_fd_set='" + d_fd_set + "'"
$ WC "d_fgetpos='define'"
+$ WC "d_finite='undef'"
+$ WC "d_finitel='undef'"
$ WC "d_flexfnam='define'"
$ WC "d_flock='undef'"
+$ WC "d_flockproto='undef'"
$ WC "d_fork='undef'"
+$ WC "d_fp_class='undef'"
$ WC "d_fpathconf='" + d_fpathconf + "'"
+$ WC "d_fpclass='undef'"
+$ WC "d_fpclassify='undef'"
+$ WC "d_fpclassl='undef'"
$ WC "d_fpos64_t='" + d_fpos64_t + "'"
$ WC "d_frexpl='" + d_frexpl + "'"
$ WC "d_fs_data_s='undef'"
-$ WC "d_fseeko='undef'"
+$ WC "d_fseeko='" + d_fseeko + "'"
$ WC "d_fsetpos='define'"
$ WC "d_fstatfs='undef'"
-$ WC "d_fstatvfs='undef'"
-$ WC "d_ftello='undef'"
-$ WC "d_getcwd='undef'"
+$ WC "d_fstatvfs='" + d_fstatvfs + "'"
+$ WC "d_fsync='undef'"
+$ WC "d_ftello='" + d_ftello + "'"
+$ WC "d_getcwd='define'"
$ WC "d_getespwnam='undef'"
$ WC "d_getfsstat='undef'"
$ WC "d_getgrent='define'"
$ WC "d_gethent='" + d_gethent + "'"
$ WC "d_gethname='" + d_gethname + "'"
$ WC "d_gethostprotos='" + d_gethostprotos + "'"
+$ WC "d_getitimer='" + d_getitimer + "'"
$ WC "d_getlogin='define'"
$ WC "d_getmnt='undef'"
$ WC "d_getmntent='undef'"
$ WC "d_getnbyname='" + d_getnbyname + "'"
$ WC "d_getnent='" + d_getnent + "'"
$ WC "d_getnetprotos='" + d_getnetprotos + "'"
+$ WC "d_getpagsz='undef'"
$ WC "d_getpbyname='" + d_getpbyname + "'"
$ WC "d_getpbynumber='" + d_getpbynumber + "'"
$ WC "d_getpent='" + d_getpent + "'"
-$ WC "d_getpgid='undef'"
+$ WC "d_getpgid='" + d_getpgid + "'"
$ WC "d_getpgrp2='undef'"
-$ WC "d_getpgrp='undef'"
-$ WC "d_getppid='undef'"
+$ WC "d_getpgrp='" + d_getpgrp + "'"
+$ WC "d_getppid='" + d_getppid + "'"
$ WC "d_getprior='undef'"
$ WC "d_getprotoprotos='" + d_getprotoprotos + "'"
$ WC "d_getprpwnam='undef'"
$ WC "d_grpasswd='undef'"
$ WC "d_hasmntopt='undef'"
$ WC "d_htonl='" + d_htonl + "'"
-$ WC "d_iconv='" + d_iconv +"'"
+$ WC "d_ilogbl='undef'"
$ WC "d_index='" + d_index + "'"
$ WC "d_inetaton='undef'"
$ WC "d_int64_t='" + d_int64_t + "'"
$ WC "d_isascii='define'"
+$ WC "d_isfinite='undef'"
+$ WC "d_isinf='undef'"
$ WC "d_isnan='" + d_isnan + "'"
$ WC "d_isnanl='" + d_isnanl + "'"
$ WC "d_killpg='undef'"
-$ WC "d_lchown='undef'"
+$ WC "d_lchown='" + d_lchown + "'"
$ WC "d_ldbl_dig='define'"
-$ WC "d_link='undef'"
+$ WC "d_libm_lib_version='undef'"
+$ WC "d_link='" + d_link + "'"
$ WC "d_llseek='undef'"
$ WC "d_locconv='" + d_locconv + "'"
$ WC "d_lockf='undef'"
$ WC "d_longdbl='" + d_longdbl + "'"
$ WC "d_longlong='" + d_longlong + "'"
$ WC "d_lseekproto='define'"
-$ WC "d_lstat='undef'"
+$ WC "d_lstat='" + d_lstat + "'"
$ WC "d_madvise='undef'"
+$ WC "d_malloc_size='undef'"
+$ WC "d_malloc_good_size='undef'"
$ WC "d_mblen='" + d_mblen + "'"
$ WC "d_mbstowcs='" + d_mbstowcs + "'"
$ WC "d_mbtowc='" + d_mbtowc + "'"
$ WC "d_mkstemp='" + d_mkstemp + "'"
$ WC "d_mkstemps='" + d_mkstemps + "'"
$ WC "d_mktime='" + d_mktime + "'"
-$ WC "d_mmap='undef'"
+$ WC "d_mmap='" + d_mmap + "'"
$ WC "d_modfl='" + d_modfl + "'"
-$ WC "d_mprotect='undef'"
+$ WC "d_modflproto='" + d_modflproto + "'"
+$ WC "d_modfl_pow32_bug='undef'"
+$ WC "d_mprotect='" + d_mprotect + "'"
$ WC "d_msg='undef'"
$ WC "d_msg_ctrunc='undef'"
$ WC "d_msg_dontroute='undef'"
$ WC "d_msg_peek='undef'"
$ WC "d_msg_proxy='undef'"
$ WC "d_msghdr_s='undef'"
-$ WC "d_msync='undef'"
-$ WC "d_munmap='undef'"
+$ WC "d_msync='" + d_msync + "'"
+$ WC "d_munmap='" + d_munmap + "'"
$ WC "d_mymalloc='" + d_mymalloc + "'"
+$ WC "d_nanosleep='" + d_nanosleep + "'"
$ WC "d_nice='define'"
+$ WC "d_nl_langinfo='" + d_nl_langinfo + "'"
$ WC "d_nv_preserves_uv='" + d_nv_preserves_uv + "'"
-$ WC "d_nv_preserves_uv_bits='" + d_nv_preserves_uv_bits + "'"
+$ WC "nv_preserves_uv_bits='" + nv_preserves_uv_bits + "'"
+$ WC "d_nv_zero_is_allbits_zero='define'"
$ WC "d_off64_t='" + d_off64_t + "'"
$ WC "d_old_pthread_create_joinable='" + d_old_pthread_create_joinable + "'"
$ WC "d_oldarchlib='define'"
$ WC "d_pathconf='" + d_pathconf + "'"
$ WC "d_pause='define'"
$ WC "d_perl_otherlibdirs='undef'"
-$ WC "d_phostname='undef'"
+$ WC "d_phostname='" + d_phostname + "'"
$ WC "d_pipe='define'"
-$ WC "d_poll='undef'"
+$ WC "d_poll='" + d_poll + "'"
+$ WC "d_procselfexe='undef'"
+$ WC "d_pthread_atfork='undef'"
+$ WC "d_pthread_attr_setscope='" + d_pthread_attr_setscope + "'"
$ WC "d_pthread_yield='" + d_pthread_yield + "'"
$ WC "d_pthreads_created_joinable='" + d_pthreads_created_joinable + "'"
$ WC "d_pwage='undef'"
$ WC "d_qgcvt='undef'"
$ WC "d_quad='" + d_quad + "'"
$ WC "d_readdir='define'"
-$ WC "d_readlink='undef'"
+$ WC "d_readlink='" + d_readlink + "'"
$ WC "d_readv='undef'"
+$ WC "d_realpath='" + d_realpath + "'"
$ WC "d_recvmsg='undef'"
$ WC "d_rename='define'"
$ WC "d_rewinddir='define'"
$ WC "d_safebcpy='undef'"
$ WC "d_safemcpy='define'"
$ WC "d_sanemcmp='define'"
+$ WC "d_sbrkproto='define'"
+$ WC "d_scalbnl='undef'"
$ WC "d_sched_yield='" + d_sched_yield + "'"
$ WC "d_scm_rights='undef'"
$ WC "d_seekdir='define'"
$ WC "d_sendmsg='undef'"
$ WC "d_setegid='undef'"
$ WC "d_setenv='" + d_setenv + "'"
-$ WC "d_seteuid='undef'"
-$ WC "d_setgrent='undef'"
+$ WC "d_seteuid='" + d_seteuid + "'"
+$ WC "d_setgrent='" + d_setgrent + "'"
$ WC "d_setgrps='undef'"
$ WC "d_sethent='" + d_sethent + "'"
+$ WC "d_setitimer='" + d_setitimer + "'"
$ WC "d_setlinebuf='undef'"
$ WC "d_setlocale='" + d_setlocale + "'"
$ WC "d_setnent='" + d_setnent + "'"
$ WC "d_setpent='" + d_setpent + "'"
-$ WC "d_setpgid='undef'"
+$ WC "d_setpgid='" + d_setpgid + "'"
$ WC "d_setpgrp2='undef'"
-$ WC "d_setpgrp='undef'"
+$ WC "d_setpgrp='" + d_setpgrp + "'"
$ WC "d_setprior='undef'"
$ WC "d_setproctitle='" + d_setproctitle + "'"
$ WC "d_setpwent='define'"
-$ WC "d_setregid='undef'"
+$ WC "d_setregid='" + d_setregid + "'"
$ WC "d_setresgid='undef'"
$ WC "d_setresuid='undef'"
-$ WC "d_setreuid='undef'"
+$ WC "d_setreuid='" + d_setreuid + "'"
$ WC "d_setrgid='undef'"
$ WC "d_setruid='undef'"
$ WC "d_setsent='" + d_setsent + "'"
-$ WC "d_setsid='undef'"
+$ WC "d_setsid='" + d_setsid + "'"
$ WC "d_setvbuf='" + d_setvbuf + "'"
$ WC "d_sfio='undef'"
$ WC "d_shm='undef'"
$ WC "d_shmatprototype='undef'"
$ WC "d_sigaction='" + d_sigaction + "'"
+$ WC "d_sigprocmask='" + d_sigprocmask + "'"
$ WC "d_sigsetjmp='" + d_sigsetjmp + "'"
+$ WC "d_sockatmark='undef'"
+$ WC "d_sockatmarkproto='undef'"
$ WC "d_socket='" + d_socket + "'"
$ WC "d_socklen_t='" + d_socklen_t + "'"
-$ WC "d_sockpair='undef'"
+$ WC "d_sockpair='" + d_sockpair + "'"
$ WC "d_socks5_init='undef'"
$ WC "d_sqrtl='define'"
+$ WC "d_sresgproto='undef'"
+$ WC "d_sresgproto='undef'"
+$ WC "d_sresproto='undef'"
+$ WC "d_sresuproto='undef'"
$ WC "d_statblks='undef'"
$ WC "d_statfs_f_flags='undef'"
$ WC "d_statfs_s='undef'"
$ WC "d_statfsflags='undef'"
$ WC "d_stdio_cnt_lval='" + d_stdio_cnt_lval + "'"
$ WC "d_stdio_ptr_lval='" + d_stdio_ptr_lval + "'"
+$ WC "d_stdio_ptr_lval_nochange_cnt='" + d_stdio_ptr_lval_nochange_cnt + "'"
+$ WC "d_stdio_ptr_lval_sets_cnt='" + d_stdio_ptr_lval_sets_cnt + "'"
$ WC "d_stdio_stream_array='undef'"
$ WC "d_stdiobase='" + d_stdiobase + "'"
$ WC "d_stdstdio='" + d_stdstdio + "'"
+$ WC "d_faststdio='" + d_faststdio + "'"
$ WC "d_strchr='define'"
$ WC "d_strcoll='" + d_strcoll + "'"
$ WC "d_strctcpy='define'"
$ WC "d_strerrm='strerror((e),vaxc$errno)'"
$ WC "d_strerror='define'"
+$ WC "d_strftime='define'"
+$ WC "d_strlcat='undef'"
+$ WC "d_strlcpy='undef'"
$ WC "d_strtod='define'"
$ WC "d_strtol='define'"
$ WC "d_strtold='" + d_strtold + "'"
$ WC "d_strtoll='" + d_strtoll + "'"
+$ WC "d_strtoq='define'"
$ WC "d_strtoul='define'"
$ WC "d_strtoull='" + d_strtoull + "'"
$ WC "d_strtouq='" + d_strtouq + "'"
$ WC "d_strxfrm='" + d_strxfrm + "'"
$ WC "d_suidsafe='undef'"
-$ WC "d_symlink='undef'"
+$ WC "d_symlink='" + d_symlink + "'"
$ WC "d_syscall='undef'"
+$ WC "d_syscallproto='undef'"
$ WC "d_sysconf='" + d_sysconf + "'"
$ WC "d_syserrlst='undef'"
$ WC "d_system='define'"
$ WC "d_tcsetpgrp='undef'"
$ WC "d_telldir='define'"
$ WC "d_telldirproto='define'"
+$ WC "d_time='define'"
$ WC "d_times='define'"
+$ IF ("''F$EXTRACT(1,3, F$GETSYI(""VERSION""))'".GES."7.0")
+$ THEN
+$ WC "d_tm_tm_gmtoff='define'"
+$ WC "d_tm_tm_zone='define'"
+$ ELSE
+$ WC "d_tm_tm_gmtoff='undef'"
+$ WC "d_tm_tm_zone='undef'"
+$ ENDIF
$ WC "d_truncate='" + d_truncate + "'"
-$ WC "d_tzname='undef'"
+$ WC "d_tzname='" + d_tzname + "'"
+$ WC "d_u32align='define'"
+$ WC "d_ualarm='" + d_ualarm + "'"
$ WC "d_umask='define'"
$ WC "d_uname='" + d_uname + "'"
$ WC "d_union_semun='undef'"
-$ WC "d_unlink_all_versions='undef'"
+$ WC "d_unlink_all_versions='" + d_unlink_all_versions + "'" ! VMS-specific
+$ WC "d_unordered='undef'"
+$ WC "d_usleep='" + d_usleep + "'"
+$ WC "d_usleepproto='" + d_usleep + "'"
$ WC "d_ustat='undef'"
$ WC "d_vendorarch='undef'"
$ WC "d_vendorlib='undef'"
$ WC "d_writev='undef'"
$ WC "db_hashtype=' '"
$ WC "db_prefixtype=' '"
+$ WC "db_version_major='" + "'"
+$ WC "db_version_minor='" + "'"
+$ WC "db_version_patch='" + "'"
$ WC "dbgprefix='" + dbgprefix + "'"
$ WC "defvoidused='15'"
$ WC "devtype='" + devtype + "'"
$ WC "dlsrc='dl_vms.c'"
$ WC "doublesize='" + doublesize + "'"
$ WC "drand01='" + drand01 + "'"
-$ WC "dynamic_ext='" + extensions + "'"
+$!
+$! The extensions symbol may be quite long
+$!
+$ tmp = "dynamic_ext='" + extensions + "'"
+$ WC/symbol tmp
+$ DELETE/SYMBOL tmp
$ WC "eagain=' '"
$ WC "ebcdic='undef'"
+$ WC "embedmymalloc='" + usemymalloc + "'"
$ WC "eunicefix=':'"
$ WC "exe_ext='" + exe_ext + "'"
-$ WC "extensions='" + extensions + "'"
+$!
+$! The extensions symbol may be quite long
+$!
+$ tmp = "extensions='" + extensions + "'"
+$ WC/symbol tmp
+$ DELETE/SYMBOL tmp
$ WC "fflushNULL='define'"
$ WC "fflushall='undef'"
$ WC "fpostype='fpos_t'"
$ WC "i8size='" + i8size + "'"
$ WC "i8type='" + i8type + "'"
$ WC "i_arpainet='undef'"
+$ WC "i_crypt='undef'"
+$ WC "i_db='undef'"
$ WC "i_dbm='undef'"
-$ WC "i_dirent='undef'"
+$ WC "i_dirent='" + i_dirent + "'"
$ WC "i_dlfcn='undef'"
$ WC "i_fcntl='" + i_fcntl + "'"
$ WC "i_float='define'"
+$ WC "i_fp='undef'"
+$ WC "i_fp_class='undef'"
$ WC "i_grp='undef'"
-$ WC "i_iconv='" + i_iconv +"'"
$ WC "i_ieeefp='undef'"
$ WC "i_inttypes='" + i_inttypes + "'"
+$ WC "i_langinfo='" + i_langinfo + "'"
$ WC "i_libutil='" + i_libutil + "'"
$ WC "i_limits='define'"
$ WC "i_locale='" + i_locale + "'"
$ WC "i_sysaccess='" + i_sysaccess + "'"
$ WC "i_sysdir='undef'"
$ WC "i_sysfile='" + i_sysfile + "'"
-$ WC "i_sysioctl='undef'"
+$ WC "i_sysioctl='" + i_sysioctl + "'"
$ WC "i_syslog='" + i_syslog + "'"
$ WC "i_sysmman='undef'"
$ WC "i_sysmode='" + i_sysmode + "'"
$ WC "i_sysresrc='undef'"
$ WC "i_syssecrt='" + i_syssecrt + "'"
$ WC "i_sysselct='undef'"
+$ WC "i_syssockio='undef'"
$ WC "i_sysstat='define'"
$ WC "i_sysstatfs='undef'"
-$ WC "i_sysstatvfs='undef'"
+$ WC "i_sysstatvfs='" + i_sysstatvfs + "'"
$ WC "i_systime='undef'"
$ WC "i_systimek='undef'"
$ WC "i_systimes='undef'"
$ WC "installbin='" + installbin + "'"
$ WC "installman1dir='" + installman1dir + "'"
$ WC "installman3dir='" + installman3dir + "'"
+$ WC "installprefix='" + vms_prefix + "'"
+$ WC "installprefixexp='" + vms_prefix + ":'"
$ WC "installprivlib='" + installprivlib + "'"
$ WC "installscript='" + installscript + "'"
$ WC "installsitearch='" + installsitearch + "'"
+$ WC "installsitebin='" + sitebin + "'"
$ WC "installsitelib='" + installsitelib + "'"
$ WC "installusrbinperl='undef'"
$ WC "intsize='" + intsize + "'"
$ WC "ivdformat='" + ivdformat + "'"
$ WC "ivsize='" + ivsize + "'"
$ WC "ivtype='" + ivtype + "'"
-$ WC "known_extensions='" + known_extensions + "'"
+$!
+$! The known_extensions symbol may be quite long
+$!
+$ tmp = "known_extensions='" + known_extensions + "'"
+$ WC/symbol tmp
+$ DELETE/SYMBOL tmp
$ WC "ld='" + ld + "'"
$ WC "lddlflags='/Share'"
-$ WC "ldflags='/NoTrace/NoMap'"
+$ WC "ldflags='" + ldflags + "'"
+$ WC "ldflags_uselargefiles='" + "'"
$ WC "lib_ext='" + lib_ext + "'"
$ WC "libc='" + libc + "'"
$ WC "libpth='/sys$share /sys$library'"
$ WC "libs='" + libs + "'"
+$ WC "libswanted='" + "'"
+$ WC "libswanted_uselargefiles='" + "'"
$ WC "longdblsize='" + longdblsize + "'"
$ WC "longlongsize='" + longlongsize + "'"
$ WC "longsize='" + longsize + "'"
-$ WC "lseeksize='4'"
-$ WC "lseektype='int'"
+$ IF uselargefiles .OR. uselargefiles .EQS. "define"
+$ THEN
+$ WC "lseeksize='8'"
+$ WC "lseektype='off_t'"
+$ ELSE
+$ WC "lseeksize='4'"
+$ WC "lseektype='int'"
+$ ENDIF
$ WC "mab='" + "'"
$ WC "make='" + make + "'"
$ WC "malloctype='void *'"
+$ WC "usemallocwrap='" + usemallocwrap + "'"
$ WC "man1ext='rno'"
$ WC "man3ext='rno'"
-$ WC "mmaptype=' " + "'"
+$ WC "mmaptype='void *'"
$ WC "modetype='unsigned int'"
$ WC "multiarch='undef'"
$ WC "mydomain='" + mydomain + "'"
$ WC "myhostname='" + myhostname + "'"
$ WC "myuname='" + myuname + "'"
+$ WC "need_va_copy='undef'"
$ WC "netdb_hlen_type='" + netdb_hlen_type + "'"
$ WC "netdb_host_type='" + netdb_host_type + "'"
$ WC "netdb_name_type='" + netdb_name_type + "'"
$ WC "netdb_net_type='" + netdb_net_type + "'"
+$ WC "nonxs_ext='" + nonxs_ext + "'"
$ WC "nveformat='" + nveformat + "'"
$ WC "nvfformat='" + nvfformat + "'"
$ WC "nvgformat='" + nvgformat + "'"
$ WC "perl_root='" + perl_root + "'" ! VMS specific $trnlnm()
$ WC "perladmin='" + perladmin + "'"
$ WC "perllibs='" + perllibs + "'"
+$ WC "perlpath='" + "''vms_prefix':[000000]Perl''exe_ext'" + "'"
+$ WC "perl_symbol='" + perl_symbol + "'" ! VMS specific
+$ WC "perl_verb='" + perl_verb + "'" ! VMS specific
$ WC "pgflquota='" + pgflquota + "'"
$ WC "pidtype='" + pidtype + "'"
-$ WC "pm_apiversion='" + version + "'"
-$! WC "prefix='" + vms_prefix + "'"
-$ WC "prefix='" + prefix + "'"
+$ WC "prefix='" + vms_prefix + "'"
+$ WC "prefixexp='" + vms_prefix + ":'"
$ WC "privlib='" + privlib + "'"
$ WC "privlibexp='" + privlibexp + "'"
+$ WC "procselfexe=' '"
$ WC "prototype='define'"
$ WC "ptrsize='" + ptrsize + "'"
$ WC "quadkind='" + quadkind + "'"
$ WC "quadtype='" + quadtype + "'"
-$ WC "randbits='31'"
+$ WC "randbits='" + randbits + "'"
+$ WC "randfunc='" + randfunc + "'"
$ WC "randseedtype='" + randseedtype + "'"
$ WC "ranlib='" + "'"
$ WC "rd_nodata=' '"
$ WC "sPRIx64='" + sPRIx64 + "'"
$ WC "sSCNfldbl='" + sSCNfldbl + "'"
$ WC "sched_yield='" + sched_yield + "'"
+$ WC "scriptdir='" + scriptdir + "'"
+$ WC "scriptdirexp='" + scriptdir + "'" ! use scriptdir for now
$ WC "seedfunc='" + seedfunc + "'"
$ WC "selectminbits='32'"
$ WC "selecttype='" + selecttype + "'"
$ WC "sh='MCR'"
-$ WC "shmattype='" + "'"
+$ WC "shmattype='" + " '"
$ WC "shortsize='" + shortsize + "'"
$ WC "shrplib='define'"
$ WC "sig_name='" + sig_name + "'"
$ DELETE/SYMBOL tmp
$ WC "sig_num='" + sig_num + "'"
$ WC "sig_num_init='" + sig_num_init + "'"
+$ WC "sig_count='" + sig_count + "'"
+$ WC "sig_size='" + sig_size + "'"
$ WC "signal_t='" + signal_t + "'"
$ WC "sitearch='" + sitearch + "'"
$ WC "sitearchexp='" + sitearchexp + "'"
+$ WC "sitebin='" + sitebin + "'"
+$ WC "sitebinexp='" + sitebin + "'"
$ WC "sitelib='" + sitelib + "'"
$ WC "sitelib_stem='" + sitelib_stem + "'"
$ WC "sitelibexp='" + sitelibexp + "'"
+$ WC "siteprefix='" + vms_prefix + "'"
+$ WC "siteprefixexp='" + vms_prefix + ":'"
$ WC "sizesize='" + sizesize + "'"
$ WC "sizetype='size_t'"
$ WC "so='" + so + "'"
$ WC "src='" + src + "'"
$ WC "ssizetype='int'"
$ WC "startperl=" + startperl ! This one's special--no enclosing single quotes
-$ WC "static_ext='" + "'"
+$ WC "static_ext='" + static_ext + "'"
$ WC "stdchar='" + stdchar + "'"
$ WC "stdio_base='((*fp)->_base)'"
$ WC "stdio_bufsiz='((*fp)->_cnt + (*fp)->_ptr - (*fp)->_base)'"
$ WC "use5005threads='" + use5005threads + "'"
$ WC "use64bitall='" + use64bitall + "'"
$ WC "use64bitint='" + use64bitint + "'"
+$ WC "usecasesensitive='" + be_case_sensitive + "'" ! VMS-specific
+$ WC "usedebugging_perl='"+use_debugging_perl+"'"
+$ WC "usedefaulttypes='" + usedefaulttypes + "'" ! VMS-specific
+$ WC "usecrosscompile='undef'"
$ WC "usedl='" + usedl + "'"
+$ WC "usefaststdio='" + usefaststdio + "'"
+$ WC "useieee='" + useieee + "'" ! VMS-specific
$ WC "useithreads='" + useithreads + "'"
$ WC "uselargefiles='" + uselargefiles + "'"
$ WC "uselongdouble='" + uselongdouble + "'"
$ WC "usemorebits='" + usemorebits + "'"
$ WC "usemultiplicity='" + usemultiplicity + "'"
$ WC "usemymalloc='" + usemymalloc + "'"
-$ WC "useperlio='undef'"
+$ WC "useperlio='" + useperlio + "'"
$ WC "useposix='false'"
+$ WC "usereentrant='undef'"
+$ WC "userelocatableinc='undef'"
+$ WC "usesecurelog='" + usesecurelog + "'" ! VMS-specific
+$ WC "usesitecustomize='" + usesitecustomize + "'"
$ WC "usesocks='undef'"
$ WC "usethreads='" + usethreads + "'"
+$ WC "usevendorprefix='" + "'" ! try to say no, though we'll be ignored as of MM 5.90_01
$ WC "usevfork='true'"
+$ WC "usevmsdebug='" + usevmsdebug + "'" ! VMS-specific
$ WC "uvoformat='" + uvoformat + "'"
$ WC "uvsize='" + uvsize + "'"
$ WC "uvtype='" + uvtype + "'"
$ WC "uvuformat='" + uvuformat + "'"
$ WC "uvxformat='" + uvxformat + "'"
+$ WC "uvXUformat='" + uvXUformat + "'"
+$ WC "vendorarch='" + "'"
$ WC "vendorarchexp='" + "'"
+$ WC "vendorbin='" + "'"
+$ WC "vendorbinexp='" + "'"
$ WC "vendorlib_stem='" + "'"
+$ WC "vendorlib='" + "'"
$ WC "vendorlibexp='" + "'"
+$ WC "vendorprefix='" + "'"
+$ WC "vendorprefixexp='" + "'"
$ WC "version='" + version + "'"
+$ WC "version_patchlevel_string='" + version_patchlevel_string + "'"
$ WC "vms_cc_type='" + vms_cc_type + "'" ! VMS specific
$ WC "vms_prefix='" + vms_prefix + "'" ! VMS specific
$ WC "vms_ver='" + vms_ver + "'" ! VMS specific
$ WC "voidflags='15'"
-$ WC "xs_apiversion='" + version + "'"
-$ WC "CONFIGDOTSH='true'"
+$!
+$! ## The UNIXy POSIXy reentrantey thingys ##
+$! See "Appendix B, Version-Dependency Tables" in the C RTL
+$! manual for when assorted _r functions became available.
+$!
+$ IF use_threads .AND. vms_ver .GES. "7.2"
+$ THEN
+$ WC "asctime_r_proto='REENTRANT_PROTO_B_SB'"
+$ WC "d_asctime_r='define'"
+$ WC "ctime_r_proto='REENTRANT_PROTO_B_SB'"
+$ WC "d_ctime_r='define'"
+$ ELSE
+$ WC "asctime_r_proto='0'"
+$ WC "d_asctime_r='undef'"
+$ WC "ctime_r_proto='0'"
+$ WC "d_ctime_r='undef'"
+$ ENDIF
+$ WC "d_crypt_r='undef'"
+$ WC "d_ctermid_r='undef'"
+$ WC "d_drand48_r='undef'"
+$ WC "d_endgrent_r='undef'"
+$ WC "d_endhostent_r='undef'"
+$ WC "d_endnetent_r='undef'"
+$ WC "d_endprotoent_r='undef'"
+$ WC "d_endpwent_r='undef'"
+$ WC "d_endservent_r='undef'"
+$ WC "d_getgrent_r='undef'"
+$ WC "d_getgrgid_r='" + d_getgrgid_r + "'"
+$ WC "d_getgrnam_r='" + d_getgrnam_r + "'"
+$ WC "d_gethostbyaddr_r='undef'"
+$ WC "d_gethostbyname_r='undef'"
+$ WC "d_gethostent_r='undef'"
+$ WC "d_getlogin_r='undef'"
+$ WC "d_getnetbyaddr_r='undef'"
+$ WC "d_getnetbyname_r='undef'"
+$ WC "d_getnetent_r='undef'"
+$ WC "d_getprotobyname_r='undef'"
+$ WC "d_getprotobynumber_r='undef'"
+$ WC "d_getprotoent_r='undef'"
+$ WC "d_getpwent_r='undef'"
+$ WC "d_getpwnam_r='" + d_getpwnam_r + "'"
+$ WC "d_getpwuid_r='" + d_getpwuid_r + "'"
+$ WC "d_getservbyname_r='undef'"
+$ WC "d_getservbyport_r='undef'"
+$ WC "d_getservent_r='undef'"
+$ WC "d_getspnam_r='undef'"
+$ WC "d_gmtime_r='undef'" ! leave undef'd; we use my_gmtime
+$ WC "d_localtime_r='undef'" ! leave undef'd; we use my_localtime
+$ WC "d_random_r='undef'"
+$ WC "d_readdir_r='define'" ! always defined; we roll our own
+$ WC "d_readdir64_r='undef'"
+$ WC "d_setgrent_r='undef'"
+$ WC "d_sethostent_r='undef'"
+$ WC "d_setlocale_r='undef'"
+$ WC "d_setnetent_r='undef'"
+$ WC "d_setprotoent_r='undef'"
+$ WC "d_setpwent_r='undef'"
+$ WC "d_setservent_r='undef'"
+$ WC "d_srand48_r='undef'"
+$ WC "d_srandom_r='undef'"
+$ WC "d_strerror_r='undef'"
+$ WC "d_tmpnam_r='undef'"
+$ WC "d_ttyname_r='" + d_ttyname_r + "'"
+$ WC "ctermid_r_proto='0'"
+$ WC "crypt_r_proto='0'"
+$ WC "drand48_r_proto='0'"
+$ WC "endgrent_r_proto='0'"
+$ WC "endhostent_r_proto='0'"
+$ WC "endnetent_r_proto='0'"
+$ WC "endprotoent_r_proto='0'"
+$ WC "endpwent_r_proto='0'"
+$ WC "endservent_r_proto='0'"
+$ WC "getgrent_r_proto='0'"
+$ WC "getgrgid_r_proto='" + getgrgid_r_proto + "'"
+$ WC "getgrnam_r_proto='" + getgrnam_r_proto + "'"
+$ WC "gethostbyaddr_r_proto='0'"
+$ WC "gethostbyname_r_proto='0'"
+$ WC "gethostent_r_proto='0'"
+$ WC "getlogin_r_proto='0'"
+$ WC "getnetbyaddr_r_proto='0'"
+$ WC "getnetbyname_r_proto='0'"
+$ WC "getnetent_r_proto='0'"
+$ WC "getprotobyname_r_proto='0'"
+$ WC "getprotobynumber_r_proto='0'"
+$ WC "getprotoent_r_proto='0'"
+$ WC "getpwent_r_proto='0'"
+$ WC "getpwnam_r_proto='0'"
+$ WC "getpwuid_r_proto='0'"
+$ WC "getservbyname_r_proto='0'"
+$ WC "getservbyport_r_proto='0'"
+$ WC "getservent_r_proto='0'"
+$ WC "getspnam_r_proto='0'"
+$ WC "gmtime_r_proto='0'"
+$ WC "localtime_r_proto='0'"
+$ WC "random_r_proto='0'"
+$ WC "readdir_r_proto='REENTRANT_PROTO_I_TSR'" ! always defined; we roll our own
+$ WC "readdir64_r_proto='0'"
+$ WC "setgrent_r_proto='0'"
+$ WC "sethostent_r_proto='0'"
+$ WC "setlocale_r_proto='0'"
+$ WC "setnetent_r_proto='0'"
+$ WC "setprotoent_r_proto='0'"
+$ WC "setpwent_r_proto='0'"
+$ WC "setservent_r_proto='0'"
+$ WC "srand48_r_proto='0'"
+$ WC "srandom_r_proto='0'"
+$ WC "strerror_r_proto='0'"
+$ WC "tmpnam_r_proto='0'"
+$ WC "ttyname_r_proto='" + ttyname_r_proto + "'"
$!
$! ##END WRITE NEW CONSTANTS HERE##
$!
$!
$! Okay, we've gotten here. Build munchconfig.exe
$ COPY/NOLOG [-.vms]munchconfig.c []
-$ COPY/NOLOG [-.vms]'Makefile_SH []
+$ COPY/NOLOG [-.vms]'Makefile_SH' []
$ 'Perl_CC' munchconfig.c
$ IF Needs_Opt
$ THEN
$ OPEN/WRITE CONFIG []munchconfig.opt
-$ IF Using_Gnu_C
+$ IF ccname .EQS. "GCC"
$ THEN
$ WRITE CONFIG "Gnu_CC:[000000]gcclib.olb/library"
$ ENDIF
$ ENDIF
$ IF F$SEARCH("munchconfig.obj") .NES. "" THEN DELETE/NOLOG/NOCONFIRM munchconfig.obj;
$ IF F$SEARCH("munchconfig.c") .NES. "" THEN DELETE/NOLOG/NOCONFIRM munchconfig.c;
-$ IF using_cxx
+$ IF ccname .EQS. "CXX"
$ THEN
$ CALL Cxx_demangler_cleanup
$ ENDIF
$ IF alldone .EQS. ""
$ THEN
$ cat4 SYS$INPUT:
+$ DECK
If you'd like to make any changes to the config.sh file before I begin
to configure things, answer yes to the following question.
-$ dflt="n"
-$ rp="Do you wish to edit ''basename_config_sh'? [''dflt'] "
+$ EOD
+$ bool_dflt="n"
+$ rp="Do you wish to edit ''basename_config_sh'? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans .EQS. "" then ans = dflt
$ IF ans
$ THEN
$ echo4 ""
$ echo4 "then this procedure will resume."
$ echo4 ""
$ default = F$ENVIRONMENT("DEFAULT")
-$ DIRECTORY 'config_sh
+$ DIRECTORY 'config_sh'
$ SET DEFAULT [-]
$ SPAWN/WAIT
-$ SET DEFAULT 'default
+$ SET DEFAULT 'default'
$ ENDIF
$ ENDIF
$!
$ !
$ ! we need an fdl file
$ CREATE [-]CONFIG.FDL
+$ DECK
RECORD
FORMAT STREAM_LF
+$ EOD
$ CREATE /FDL=[-]CONFIG.FDL [-]CONFIG.LOCAL
$ ! First spit out the header info with the local defines (to get
$ ! around the 255 character command line limit)
$ IF mymalloc THEN WC "#define EMBEDMYMALLOC"
$ IF use_pack_malloc THEN WC "#define PACK_MALLOC"
$ IF use_debugmalloc THEN WC "#define DEBUGGING_MSTATS"
-$ IF Using_Gnu_C THEN WC "#define GNUC_ATTRIBUTE_CHECK"
+$ IF ccname .EQS. "GCC" THEN WC "#define GNUC_ATTRIBUTE_CHECK"
$ IF (Has_Dec_C_Sockets)
$ THEN
$ WC "#define VMS_DO_SOCKETS"
$ IF d_herrno .EQS. "undef" THEN WC "#define NEED_AN_H_ERRNO"
$ WC "#define HAS_ENVGETENV"
$ WC "#define PERL_EXTERNAL_GLOB"
+$ IF archname .EQS. "VMS_VAX" .AND. -
+ ccname .EQS. "DEC" .AND. -
+ ccversion .LE. 50390006
+$ THEN
+$! Alas this does not help to build Fcntl
+$! WC "#define PERL_IGNORE_FPUSIG SIGFPE"
+$ ENDIF
+$ IF kill_by_sigprc .EQS. "define" then WC "#define KILL_BY_SIGPRC"
+$ IF unlink_all_versions .OR. unlink_all_versions .EQS. "define" THEN -
+ WC "#define UNLINK_ALL_VERSIONS"
$ CLOSE CONFIG
$!
$ echo4 "Doing variable substitutions on .SH files..."
$!
$! Now build the normal config.h
$ DEFINE/USER_MODE sys$output [-]config.main
-$ mcr []munchconfig 'config_sh [-]config_h.sh
+$ mcr []munchconfig 'config_sh' [-]config_h.sh
$ ! Concatenate them together
$ copy [-]config.local,[-]config.main [-]config.h
$! Clean up
-$ DELETE/NOLOG [-]CONFIG.MAIN;*
-$ DELETE/NOLOG [-]CONFIG.LOCAL;*
-$ DELETE/NOLOG [-]CONFIG.FDL;*
+$ DELETE/NOLOG/NOCONFIRM [-]CONFIG.MAIN;*
+$ DELETE/NOLOG/NOCONFIRM [-]CONFIG.LOCAL;*
+$ DELETE/NOLOG/NOCONFIRM [-]CONFIG.FDL;*
$!
-$ IF Using_Dec_C
+$ IF ccname .EQS. "DEC"
$ THEN
$ DECC_REPLACE = "DECC=decc=1"
$ ELSE
-$ DECC_REPLACE = "DECC="
+$ DECC_REPLACE = "DECC="
+$ ENDIF
+$ IF ccname .EQS. "CXX"
+$ THEN
+$ DECCXX_REPLACE = "DECCXX=DECCXX=1"
+$ ELSE
+$ DECCXX_REPLACE = "DECCXX="
$ ENDIF
-$ IF Using_Gnu_C
+$ IF ccname .EQS. "GCC"
$ THEN
$ GNUC_REPLACE = "GNUC=gnuc=1"
$ ELSE
$ SOCKET_REPLACE = "SOCKET="
$ ENDIF
$ ENDIF
-$ IF Use_Threads
+$ IF use_threads
$ THEN
$ IF (vms_ver .LES. "6.2")
$ THEN
$ ELSE
$ MALLOC_REPLACE = "MALLOC="
$ ENDIF
+$ IF uselargefiles .OR. uselargefiles .EQS. "define"
+$ THEN
+$! Perl can not use _USE_STD_STAT at the moment
+$! IF d_symlink .or. d_symlink .eqs. "define"
+$! THEN
+$! LARGEFILE_REPLACE = "LARGEFILE=LARGEFILE=_USE_STD_STAT=1"
+$! ELSE
+$ LARGEFILE_REPLACE = "LARGEFILE=LARGEFILE=_LARGEFILE=1"
+$! ENDIF
+$ ELSE
+$ LARGEFILE_REPLACE = "LARGEFILE="
+$ ENDIF
$ echo4 "Extracting ''defmakefile' (with variable substitutions)"
-$ DEFINE/USER_MODE sys$output 'UUmakefile
-$ mcr []munchconfig 'config_sh 'Makefile_SH "''DECC_REPLACE'" "''ARCH_TYPE'" "''GNUC_REPLACE'" "''SOCKET_REPLACE'" "''THREAD_REPLACE'" -
-"''C_Compiler_Replace'" "''MALLOC_REPLACE'" "''Thread_Live_Dangerously'" "PV=''version'" "FLAGS=FLAGS=''extra_flags'"
-$ echo4 "Extracting Build_Ext.Com (without variable substitutions)"
-$ Create Sys$Disk:[-]Build_Ext.Com
+$ DEFINE/USER_MODE sys$output 'UUmakefile'
+$ mcr []munchconfig 'config_sh' 'Makefile_SH' "''DECC_REPLACE'" "''DECCXX_REPLACE'" "''ARCH_TYPE'" "''GNUC_REPLACE'" -
+"''SOCKET_REPLACE'" "''THREAD_REPLACE'" "''C_Compiler_Replace'" "''MALLOC_REPLACE'" -
+"''Thread_Live_Dangerously'" "PV=''version'" "FLAGS=FLAGS=''extra_flags'" "''LARGEFILE_REPLACE'"
+$! Clean up after ourselves
+$ DELETE/NOLOG/NOCONFIRM []munchconfig.exe;
+$!
+$ echo4 "Extracting make_ext.com (without variable substitutions)"
+$ Create Sys$Disk:[-]make_ext.com
$ Deck/Dollar="$EndOfTpl$"
-$!++ Build_Ext.Com
+$!++ make_ext.com
$! NOTE: This file is extracted as part of the VMS configuration process.
$! Any changes made to it directly will be lost. If you need to make any
$! changes, please edit the template in Configure.Com instead.
$ def = F$Environment("Default")
-$ exts1 = F$Edit(p1,"Compress")
-$ p2 = F$Edit(p2,"Upcase,Compress,Trim")
-$ If F$Locate("MCR ",p2).eq.0 Then p2 = F$Extract(3,255,p2)
-$ miniperl = "$" + F$Search(F$Parse(p2,".Exe"))
-$ makeutil = p3
-$ if f$type('p3') .nes. "" then makeutil = 'p3'
-$ targ = F$Edit(p4,"Lowercase")
+$! p1 - how to invoke miniperl (passed in from descrip.mms)
+$ p1 = F$Edit(p1,"Upcase,Compress,Trim")
+$ If F$Locate("MCR ",p1).eq.0 Then p1 = F$Extract(3,255,p1)
+$ miniperl = "$" + F$Search(F$Parse(p1,".Exe"))
+$! p2 - how to invoke local make utility (passed in from descrip.mms)
+$ makeutil = p2
+$ if f$type('p2') .nes. "" then makeutil = 'p2'
+$! p3 - make target (passed in from descrip.mms)
+$ targ = F$Edit(p3,"Lowercase")
+$ sts = 1
+$ extensions = ""
+$ open/read CONFIG config.sh
+$ find_ext_loop:
+$ read/end=end_ext_loop CONFIG line
+$ if (f$extract(0,12,line) .NES. "extensions='")
+$ then goto find_ext_loop
+$ else extensions = f$extract(12,f$length(line),line) - "'"
+$ endif
+$ end_ext_loop:
+$ close CONFIG
+$ extensions = f$edit(extensions,"TRIM,COMPRESS")
$ i = 0
$ next_ext:
-$ ext = F$Element(i," ",p1)
-$ If ext .eqs. " " Then Goto done
+$ ext = f$element(i," ",extensions)
+$ If ext .eqs. " " .or. ext .eqs. "" Then Goto done
$ Define/User_mode Perl_Env_Tables CLISYM_LOCAL
$ miniperl
+$ deck
($extdir = $ENV{'ext'}) =~ s/::/./g;
$extdir =~ s#/#.#g;
if ($extdir =~ /^vms/i) { $extdir =~ s/vms/.vms.ext/i; }
else { $extdir = ".ext.$extdir"; }
($ENV{'extdir'} = "[$extdir]");
($ENV{'up'} = ('-') x ($extdir =~ tr/././));
+$ eod
$ Set Default &extdir
$ redesc = 0
$ If F$Locate("clean",targ) .eqs. F$Length(targ)
$ Then
-$ Write Sys$Output "Building ''ext' . . ."
+$ Write Sys$Output ""
+$ Write Sys$Output " Making ''ext' (dynamic)"
$ On Error Then Goto done
$ If F$Search("Descrip.MMS") .eqs. ""
$ Then
$ On Error Then Continue
$ EndIf
$ If redesc Then -
- miniperl "-I[''up'.lib]" Makefile.PL "INST_LIB=[''up'.lib]" "INST_ARCHLIB=[''up'.lib]"
+ miniperl "-I[''up'.lib]" Makefile.PL "INST_LIB=[''up'.lib]" "INST_ARCHLIB=[''up'.lib]" "PERL_CORE=1"
$ makeutil 'targ'
$ i = i + 1
$ Set Def &def
$ sts = $Status
$ Set Def &def
$ Exit sts
-$!-- Build_Ext.Com
+$!-- make_ext.com
$EndOfTpl$
$!
-$! Clean up after ourselves
-$ DELETE/NOLOG/NOCONFIRM []munchconfig.exe;
+$! Note that the /key qualifier to search, as in:
+$! search README.* "=head"/key=(position=1)/window=0/output=extra.pods
+$! is not supported on VMS V5.5-2, hence not used in extra_pods.com.
+$!
+$ echo4 "Extracting extra_pods.com (without variable substitutions)"
+$ Create Sys$Disk:[-]extra_pods.com
+$ Deck/Dollar="$EOExtra_Pods$"
+$!++ extra_pods.com
+$! NOTE: This file is extracted as part of the VMS configuration process.
+$! Any changes made to it directly will be lost. If you need to make any
+$! changes, please edit the template in Configure.Com instead.
+$! Use FORCE if you've just podified a README.* file on VMS.
+$ if f$search("extra.pods") .eqs. "" .or. P1 .eqs. "FORCE" then -
+ search README.* "=head"/window=0/output=extra.pods
+$ open/read/error=extra_close EXTRA extra.pods
+$extra_loop:
+$ read/error=extra_close/END_OF_FILE=extra_close EXTRA file
+$ file_type = f$edit(f$parse(file,,,"TYPE",),"LOWERCASE") - "."
+$ if file_type .nes. "VMS" .and. file_type .nes. "vms"
+$ then
+$ pod_file = "[.pod]perl''file_type'.pod"
+$ file = file - "''f$parse(file,,,"VERSION",)'"
+$ if p1 .eqs. "CLEAN"
+$ then if f$search(pod_file) .nes. "" then delete/log 'pod_file';*
+$ else
+$ do_copy := false
+$ if f$search(pod_file) .eqs. ""
+$ then do_copy := true
+$ else
+$ file_rdt = f$cvtime(f$file_attributes(file,"RDT"))
+$ pod_file_rdt = f$cvtime(f$file_attributes(pod_file,"RDT"))
+$ if file_rdt .GTS. pod_file_rdt then do_copy := true
+$ endif
+$ ! wacky method to preserve case on ODS-5 even when parse style is traditional
+$ if do_copy then mcr sys$disk:[]miniperl.exe -e "exit 0+$^E unless File::Copy::rmscopy(q{''file'}, q{''pod_file'});"
+$ endif
+$ endif
+$ goto extra_loop
+$extra_close:
+$ close EXTRA
+$ if p1 .eqs. "CLEAN" .and. f$search("extra.pods;-1") .nes. "" then -
+ purge/nolog extra.pods
+$!-- extra_pods.com
+$EOExtra_Pods$
$!
$! Warn of dangerous symbols or logical names
$!
$ Bad_env = ""
$ IF p2 .eqs. "SYMBOL"
$ THEN
-$ IF f$type('p1) .nes. "" THEN Bad_env := SYMBOL
+$ IF f$type('p1') .nes. "" THEN Bad_env := SYMBOL
$ ELSE
$ IF f$trnlnm(p1) .nes. "" THEN Bad_env := LOGICAL
$ ENDIF
$ WRITE CONFIG " $ DELETE/SYMBOL/GLOBAL ''p1'"
$ IF f$locate("""",&p1) .ge. f$length(&p1)
$ THEN
-$ WRITE CONFIG " after building, testing, and installing ''package'
+$ WRITE CONFIG " after building, testing, and installing ''package'"
$ WRITE CONFIG " restore the symbol with:"
$ WRITE CONFIG " $ ''p1' == """ + &p1 + """"
$ ENDIF
$ ENDSUBROUTINE ! Bad_environment
$ echo ""
$ echo4 "Checking for dangerous pre-existing global symbols and logical names."
-$ CALL Bad_environment "TMP"
+$ CALL Bad_environment "COMP"
+$ CALL Bad_environment "EXT"
+$ CALL Bad_environment "FOO"
$ CALL Bad_environment "LIB"
+$ CALL Bad_environment "LIST"
+$ CALL Bad_environment "MIME"
+$ CALL Bad_environment "POSIX"
+$ CALL Bad_environment "SYS"
$ CALL Bad_environment "T"
-$ CALL Bad_environment "FOO"
-$ CALL Bad_environment "EXT"
+$ CALL Bad_environment "THREAD"
+$ CALL Bad_environment "THREADS"
+$ CALL Bad_environment "TIME"
+$ CALL Bad_environment "TMP"
+$ CALL Bad_environment "UNICODE"
+$ CALL Bad_environment "UTIL"
$ CALL Bad_environment "TEST" "SYMBOL"
$ IF f$search("config.msg") .eqs. "" THEN echo "OK."
$!
$ echo4 "The perl.cld file is now being written..."
$ OPEN/WRITE CONFIG 'file_2_find'
$ ext = ".exe"
-$ IF ((sharedperl) .AND. (F$GETSYI("HW_MODEL") .GE. 1024)) THEN ext := .AXE
+$ IF (sharedperl .AND. F$EXTRACT(0,7,archname) .EQS. "VMS_AXP") THEN ext := .AXE
+$ IF (sharedperl .AND. F$EXTRACT(0,8,archname) .EQS. "VMS_IA64") THEN ext := .IXE
$ IF (use_vmsdebug_perl)
$ THEN
$ WRITE CONFIG "define verb dbgperl"
$ echo ""
$ echo4 "The perl_setup.com file is now being written..."
$ file_2_find = "[-]perl_setup.com"
-$ OPEN/WRITE CONFIG 'file_2_find'
+$!
+$! Folks are likely to want to edit perl_setup.com.
+$! STMLF RFM plays nicer with ported editors than does VFC.
+$!
+$ CREATE [-]CONFIG.FDL
+$ DECK
+RECORD
+ FORMAT STREAM_LF
+$ EOD
+$ CREATE /FDL=[-]CONFIG.FDL 'file_2_find'
+$ OPEN/APPEND CONFIG 'file_2_find'
+$ DELETE/NOLOG/NOCONFIRM [-]CONFIG.FDL;
$ WRITE CONFIG "$!"
$ WRITE CONFIG "$! Perl_Setup.com ''cf_time'"
$ IF cf_email.NES.perladmin
$ WRITE CONFIG "$! This perl configured & administered by ''perladmin'"
$ ENDIF
$ WRITE CONFIG "$!"
+$! HP hack to make distributing binaries easier
+$!----------------------------------------------
+$ pcsi_producer = f$trnlnm("PCSI_PRODUCER")
+$ if pcsi_producer .eqs. ""
+$ then
+$ prefix = prefix - "000000."
+$ IF F$LOCATE(".]",prefix) .EQ. F$LENGTH(prefix) THEN prefix = prefix - "]" + ".]"
+$ WRITE CONFIG "$ define/translation=concealed ''vms_prefix' ''prefix'"
+$ else
+$ WRITE CONFIG "$ myproc = f$environment(""PROCEDURE"")"
+$ WRITE CONFIG "$ myroot_dev = f$parse(myproc,,,""DEVICE"",""NO_CONCEAL"")"
+$ WRITE CONFIG "$ myroot_dir = f$parse(myproc,,,""DIRECTORY"",""NO_CONCEAL"")"
+$ WRITE CONFIG "$ myroot_dir = myroot_dir - ""][000000."" - ""><000000."""
+$ WRITE CONFIG "$ myroot_dir = myroot_dir - ""][000000]"" - ""><000000>"""
+$ WRITE CONFIG "$ myroot_dir = myroot_dir - ""]["" - ""><"""
+$ WRITE CONFIG "$ myroot_dir = myroot_dir - "".]"" - "".>"" - ""["" - ""]"" - ""<"" - "">"""
+$ WRITE CONFIG "$ if f$trnlnm(""HP_BUILD_PERL_BIN_KIT"",""LNM$PROCESS_TABLE"") .EQS. """""
+$ WRITE CONFIG "$ then"
+$ WRITE CONFIG "$ define/translation=concealed ''vms_prefix' 'myroot_dev'['myroot_dir'.]"
+$ WRITE CONFIG "$ endif"
+$ endif
+$
$ prefix = prefix - "000000."
-$ IF F$LOCATE(".]",prefix) .EQ. F$LENGTH(prefix) THEN -
- prefix = prefix - "]" + ".]"
+$ IF F$LOCATE(".]",prefix) .EQ. F$LENGTH(prefix) THEN prefix = prefix - "]" + ".]"
$ WRITE CONFIG "$ define/translation=concealed ''vms_prefix' ''prefix'"
+
+
$ WRITE CONFIG "$ ext = "".exe"""
$ IF sharedperl
$ THEN
-$ write config "$ if f$getsyi(""HW_MODEL"") .ge. 1024 then ext = "".AXE"""
+$ WRITE CONFIG "$ if f$getsyi(""ARCH_TYPE"") .eq. 2 then ext = "".AXE"""
+$ WRITE CONFIG "$ if f$getsyi(""ARCH_TYPE"") .eq. 3 then ext = "".IXE"""
$ ENDIF
$ IF (perl_symbol)
$ THEN
+$ perl_setup_perl = "'" + "'perl'" ! triple quoted foreign command symbol
$ IF (use_vmsdebug_perl)
$ THEN
-$ WRITE CONFIG "$ dbgperl :== $''vms_prefix':[000000]dbgPerl'ext'"
-$ WRITE CONFIG "$ perl :== $''vms_prefix':[000000]ndbgPerl'ext'"
-$ WRITE CONFIG "$ define dbgPerlShr ''vms_prefix':[000000]dbgPerlShr'ext'"
+$ WRITE CONFIG "$ dbgperl :== $''vms_prefix':[000000]dbgperl'ext'"
+$ WRITE CONFIG "$ perl :== $''vms_prefix':[000000]ndbgperl'ext'"
+$ WRITE CONFIG "$ define dbgperlshr ''vms_prefix':[000000]dbgperlshr'ext'"
$ ELSE
$ WRITE CONFIG "$ perl :== $''vms_prefix':[000000]Perl'ext'"
-$ WRITE CONFIG "$ define PerlShr ''vms_prefix':[000000]PerlShr'ext'"
+$ WRITE CONFIG "$ define perlshr ''vms_prefix':[000000]perlshr'ext'"
$ ENDIF
$ ELSE ! .NOT.perl_symbol
+$ perl_setup_perl = "perl" ! command verb
$ IF (use_vmsdebug_perl)
$ THEN
-$ WRITE CONFIG "$ define dbgPerlShr ''vms_prefix':[000000]dbgPerlShr'ext'"
+$ WRITE CONFIG "$ define dbgperlshr ''vms_prefix':[000000]dbgperlshr'ext'"
$ ELSE
-$ WRITE CONFIG "$ define PerlShr ''vms_prefix':[000000]PerlShr'ext'"
+$ WRITE CONFIG "$ define perlshr ''vms_prefix':[000000]perlshr'ext'"
$ ENDIF
$ IF perl_verb .EQS. "PROCESS"
$ THEN
$ WRITE CONFIG "$! define SYS$TIMEZONE_DIFFERENTIAL ''tzd'"
$ ENDIF
$ WRITE CONFIG "$!"
-$ WRITE CONFIG "$! Symbols for commonly used scripts:"
+$ WRITE CONFIG "$! Symbols for commonly used programs:"
$ WRITE CONFIG "$!"
-$ IF (perl_symbol)
+$ WRITE CONFIG "$ c2ph == """ + perl_setup_perl + " ''vms_prefix':[utils]c2ph.com"""
+$ WRITE CONFIG "$ cpan == """ + perl_setup_perl + " ''vms_prefix':[utils]cpan.com"""
+$ IF F$LOCATE("Devel::DProf",extensions) .LT. F$LENGTH(extensions)
$ THEN
-$ WRITE CONFIG "$ Perldoc == ""'"+"'Perl' ''vms_prefix':[lib.pod]Perldoc.com -t"""
-$ WRITE CONFIG "$ pod2text == ""'"+"'Perl' pod2text"""
-$ WRITE CONFIG "$ pod2html == ""'"+"'Perl' pod2html"""
-$ WRITE CONFIG "$ pod2latex == ""'"+"'Perl' ''vms_prefix':[lib.pod]pod2latex.com"""
-$ WRITE CONFIG "$!pod2man == ""'"+"'Perl' pod2man"""
-$ WRITE CONFIG "$!Perlbug == ""'"+"'Perl' ''vms_prefix':[lib]Perlbug.com"""
-$ WRITE CONFIG "$ c2ph == ""'"+"'Perl' ''vms_prefix':[utils]c2ph.com"""
-$ IF F$LOCATE("Devel::DProf",extensions) .LT. F$LENGTH(extensions)
-$ THEN
-$ WRITE CONFIG "$ dprofpp == ""'"+"'Perl' ''vms_prefix':[utils]dprofpp.com"""
-$ ENDIF
-$ WRITE CONFIG "$ h2ph == ""'"+"'Perl' ''vms_prefix':[utils]h2ph.com"""
-$ WRITE CONFIG "$ h2xs == ""'"+"'Perl' ''vms_prefix':[utils]h2xs.com"""
-$ WRITE CONFIG "$!perlcc == ""'"+"'Perl' ''vms_prefix':[utils]perlcc.com"""
-$ WRITE CONFIG "$ splain == ""'"+"'Perl' ''vms_prefix':[utils]splain.com"""
-$ ELSE
-$ WRITE CONFIG "$ Perldoc == ""Perl ''vms_prefix':[lib.pod]Perldoc.com -t"""
-$ WRITE CONFIG "$ pod2text == ""Perl pod2text"""
-$ WRITE CONFIG "$ pod2html == ""Perl pod2html"""
-$ WRITE CONFIG "$ pod2latex == ""Perl ''vms_prefix':[lib.pod]pod2latex.com"""
-$ WRITE CONFIG "$!pod2man == ""Perl pod2man"""
-$ WRITE CONFIG "$!Perlbug == ""Perl ''vms_prefix':[lib]Perlbug.com"""
-$ WRITE CONFIG "$ c2ph == ""Perl ''vms_prefix':[utils]c2ph.com"""
-$ IF F$LOCATE("Devel::DProf",extensions) .LT. F$LENGTH(extensions)
-$ THEN
-$ WRITE CONFIG "$ dprofpp == ""Perl ''vms_prefix':[utils]dprofpp.com"""
-$ ENDIF
-$ WRITE CONFIG "$ h2ph == ""Perl ''vms_prefix':[utils]h2ph.com"""
-$ WRITE CONFIG "$ h2xs == ""Perl ''vms_prefix':[utils]h2xs.com"""
-$ WRITE CONFIG "$!perlcc == ""Perl ''vms_prefix':[utils]perlcc.com"""
-$ WRITE CONFIG "$ splain == ""Perl ''vms_prefix':[utils]splain.com"""
-$ ENDIF
+$ WRITE CONFIG "$ dprofpp == """ + perl_setup_perl + " ''vms_prefix':[utils]dprofpp.com"""
+$ ENDIF
+$ WRITE CONFIG "$ enc2xs == """ + perl_setup_perl + " ''vms_prefix':[utils]enc2xs.com"""
+$ WRITE CONFIG "$ find2perl == """ + perl_setup_perl + " ''vms_prefix':[utils]find2perl.com"""
+$ WRITE CONFIG "$ h2ph == """ + perl_setup_perl + " ''vms_prefix':[utils]h2ph.com"""
+$ WRITE CONFIG "$ h2xs == """ + perl_setup_perl + " ''vms_prefix':[utils]h2xs.com"""
+$ WRITE CONFIG "$ instmodsh == """ + perl_setup_perl + " ''vms_prefix':[utils]instmodsh.com"""
+$ WRITE CONFIG "$ libnetcfg == """ + perl_setup_perl + " ''vms_prefix':[utils]libnetcfg.com"""
+$ WRITE CONFIG "$ perlbug == """ + perl_setup_perl + " ''vms_prefix':[lib]perlbug.com"""
+$ WRITE CONFIG "$!perlcc == """ + perl_setup_perl + " ''vms_prefix':[utils]perlcc.com"""
+$ WRITE CONFIG "$ perldoc == """ + perl_setup_perl + " ''vms_prefix':[lib.pod]perldoc.com -t"""
+$ WRITE CONFIG "$ perlivp == """ + perl_setup_perl + " ''vms_prefix':[utils]perlivp.com"""
+$ WRITE CONFIG "$ piconv == """ + perl_setup_perl + " ''vms_prefix':[utils]piconv.com"""
+$ WRITE CONFIG "$ pl2pm == """ + perl_setup_perl + " ''vms_prefix':[utils]pl2pm.com"""
+$ WRITE CONFIG "$ pod2html == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2html"""
+$ WRITE CONFIG "$ pod2latex == """ + perl_setup_perl + " ''vms_prefix':[lib.pod]pod2latex.com"""
+$ WRITE CONFIG "$ pod2text == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2text"""
+$ WRITE CONFIG "$!pod2man == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2man"""
+$ WRITE CONFIG "$ pod2usage == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2usage.com"""
+$ WRITE CONFIG "$ podchecker == """ + perl_setup_perl + " ''vms_prefix':[utils]podchecker.com"""
+$ WRITE CONFIG "$ podselect == """ + perl_setup_perl + " ''vms_prefix':[utils]podselect.com"""
+$ WRITE CONFIG "$ prove == """ + perl_setup_perl + " ''vms_prefix':[utils]prove.com"""
+$ WRITE CONFIG "$ psed == """ + perl_setup_perl + " ''vms_prefix':[utils]psed.com"""
+$ WRITE CONFIG "$ pstruct == """ + perl_setup_perl + " ''vms_prefix':[utils]pstruct.com"""
+$ WRITE CONFIG "$ s2p == """ + perl_setup_perl + " ''vms_prefix':[utils]s2p.com"""
+$ WRITE CONFIG "$ splain == """ + perl_setup_perl + " ''vms_prefix':[utils]splain.com"""
+$ WRITE CONFIG "$ xsubpp == """ + perl_setup_perl + " ''vms_prefix':[utils]xsubpp.com"""
$ CLOSE CONFIG
$!
$ echo ""
$ IF ((.NOT.perl_symbol) .AND. (perl_verb .EQS. "DCLTABLES"))
$ THEN
$ file_2_find = "[-]''packageup'_install.com"
-$ OPEN/WRITE CONFIG 'file_2_find
+$ OPEN/WRITE CONFIG 'file_2_find'
$ WRITE CONFIG "$ set command perl /table=sys$common:[syslib]dcltables.exe -"
$ WRITE CONFIG " /output=sys$common:[syslib]dcltables.exe"
$ WRITE CONFIG "$ install replace sys$common:[syslib]dcltables.exe"
$!
$ IF ( F$SEARCH("config.msg").NES."" )
$ THEN
-$ echo "Hmm. I also noted the following information while running:"
-$ echo ""
-$ type config.msg
+$ echo4 "Hmm. I also noted the following information while running:"
+$ echo4 ""
+$ TYPE/OUTPUT=SYS$ERROR: config.msg
$ SET PROTECTION=(SYSTEM:RWED,OWNER:RWED) config.msg
$ DELETE/NOLOG/NOCONFIRM config.msg;
$ ENDIF
$!
$Clean_up:
+$ SET NOON
$ IF (silent)
$ THEN
+$ CLOSE/NOLOG STDOUT
$ DEASSIGN SYS$OUTPUT
-$! DEASSIGN SYS$ERROR
$ ENDIF
-$ IF F$GETJPI("","FILCNT").NE.vms_filcnt THEN CLOSE CONFIG
-$ IF F$GETJPI("","FILCNT").NE.vms_filcnt
+$ CLOSE/NOLOG CONFIG
+$ IF F$GETJPI("","FILCNT").GT.vms_filcnt
$ THEN WRITE SYS$ERROR "%Config-W-VMS, WARNING: There is a file still open"
$ ENDIF
$ dflt = F$ENVIRONMENT("DEFAULT")
$ DELETE/NOLOG/NOCONFIRM UU.DIR;
$ ENDIF
$ SET DEFAULT 'vms_default_directory_name' !be kind rewind
-$ STOP
$ EXIT
$!: End of Configure