* so the default case (for NeXT) is big endian to catch them.
* This might matter for NeXT 3.0.
*/
-#if defined(CROSSCOMPILE) || defined(MULTIARCH)
-# ifdef __LITTLE_ENDIAN__
-# if LONGSIZE == 4
-# define BYTEORDER 0x1234
-# else
-# if LONGSIZE == 8
-# define BYTEORDER 0x12345678
-# endif
-# endif
-# else
-# ifdef __BIG_ENDIAN__
-# if LONGSIZE == 4
-# define BYTEORDER 0x4321
-# else
-# if LONGSIZE == 8
-# define BYTEORDER 0x87654321
-# endif
-# endif
-# endif
-# endif
-# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
-# define BYTEORDER 0x4321
-# endif
-#else
#define BYTEORDER 0x$byteorder /* large digits for MSB */
-#endif /* NeXT */
/* CASTI32:
* This symbol is defined if the C compiler can cast negative
*/
#$d_writev HAS_WRITEV /**/
-/* HAS_DBMINIT64:
- * This symbol, if defined, indicates that the dbminit64 routine is
- * available to open dbm files larger than 2 gigabytes.
- */
-/* HAS_DBMCLOSE64:
- * This symbol, if defined, indicates that the dbmclose64 routine is
- * available to close dbm files larger than 2 gigabytes.
- */
-/* HAS_FETCH64:
- * This symbol, if defined, indicates that the fetch64 routine is
- * available to fetch from dbm files larger than 2 gigabytes.
- */
-/* HAS_STORE64:
- * This symbol, if defined, indicates that the store64 routine is
- * available to store to dbm files larger than 2 gigabytes.
- */
-/* HAS_DELETE64:
- * This symbol, if defined, indicates that the delete64 routine is
- * available to delete from dbm files larger than 2 gigabytes.
- */
-/* HAS_FIRSTKEY64:
- * This symbol, if defined, indicates that the firstkey64 routine is
- * available to firstkey in dbm files larger than 2 gigabytes.
- */
-/* HAS_NEXTKEY64:
- * This symbol, if defined, indicates that the nextkey64 routine is
- * available to nextkey in dbm files larger than 2 gigabytes.
- */
-#$d_dbminit64 HAS_DBMINIT64 /**/
-#$d_dbmclose64 HAS_DBMCLOSE64 /**/
-#$d_fetch64 HAS_FETCH64 /**/
-#$d_store64 HAS_STORE64 /**/
-#$d_delete64 HAS_DELETE64 /**/
-#$d_firstkey64 HAS_FIRSTKEY64 /**/
-#$d_nextkey64 HAS_NEXTKEY64 /**/
-
/* USE_DYNAMIC_LOADING:
* This symbol, if defined, indicates that dynamic loading of
* some sort is available.
*/
#$i_sysstatvfs I_SYS_STATVFS /**/
-/* HAS_FSTAT64:
- * This symbol, if defined, indicates that the fstat64 routine is
- * available to stat files (fds) larger than 2 gigabytes.
- */
-/* HAS_FTRUNCATE64:
- * This symbol, if defined, indicates that the ftruncate64 routine is
- * available to tell files larger than 2 gigabytes.
- */
-/* HAS_LSEEK64:
- * This symbol, if defined, indicates that the lseek64 routine is
- * available to seek files larger than 2 gigabytes.
- */
-/* HAS_LSTAT64:
- * This symbol, if defined, indicates that the lstat64 routine is
- * available to stat files (symlinks) larger than 2 gigabytes.
- */
-/* HAS_OPEN64:
- * This symbol, if defined, indicates that the open64 routine is
- * available to open files larger than 2 gigabytes.
- */
-/* HAS_OPENDIR64:
- * This symbol, if defined, indicates that the opendir64 routine is
- * available to opendir files larger than 2 gigabytes.
- */
-/* HAS_READDIR64:
- * This symbol, if defined, indicates that the readdir64 routine is
- * available to readdir files larger than 2 gigabytes.
- */
-/* HAS_SEEKDIR64:
- * This symbol, if defined, indicates that the seekdir64 routine is
- * available to seekdir files larger than 2 gigabytes.
- */
-/* HAS_STAT64:
- * This symbol, if defined, indicates that the stat64 routine is
- * available to stat files larger than 2 gigabytes.
- */
-/* HAS_TELLDIR64:
- * This symbol, if defined, indicates that the telldir64 routine is
- * available to telldir files larger than 2 gigabytes.
- */
-/* HAS_TRUNCATE64:
- * This symbol, if defined, indicates that the truncate64 routine is
- * available to truncate files larger than 2 gigabytes.
- */
/* HAS_OFF64_T:
* This symbol will be defined if the C compiler supports off64_t.
*/
-/* HAS_STRUCT_DIRENT64:
- * This symbol will be defined if the C compiler supports struct dirent64.
- */
-#$d_fstat64 HAS_FSTAT64 /**/
-#$d_ftruncate64 HAS_FTRUNCATE64 /**/
-#$d_lseek64 HAS_LSEEK64 /**/
-#$d_lstat64 HAS_LSTAT64 /**/
-#$d_open64 HAS_OPEN64 /**/
-#$d_opendir64 HAS_OPENDIR64 /**/
-#$d_readdir64 HAS_READDIR64 /**/
-#$d_seekdir64 HAS_SEEKDIR64 /**/
-#$d_stat64 HAS_STAT64 /**/
-#$d_telldir64 HAS_TELLDIR64 /**/
-#$d_truncate64 HAS_TRUNCATE64 /**/
-#$d_off64_t HAS_OFF64_T /**/
-#$d_dirent64_s HAS_STRUCT_DIRENT64 /**/
+/* HAS_FPOS64_T:
+ * This symbol will be defined if the C compiler supports fpos64_t.
+ */
+#$d_off64_t HAS_OFF64_T /**/
+#$d_fpos64_t HAS_FPOS64_T /**/
/* PERL_PRIfldbl:
* This symbol, if defined, contains the string used by stdio to
* This symbol, if defined, contains the string used by stdio to
* format 64-bit unsigned decimal numbers (format 'u') for output.
*/
+/* PERL_PRIo64:
+ * This symbol, if defined, contains the string used by stdio to
+ * format 64-bit octal numbers (format 'o') for output.
+ */
/* PERL_PRIx64:
* This symbol, if defined, contains the string used by stdio to
* format 64-bit hexadecimal numbers (format 'x') for output.
*/
#$d_PRId64 PERL_PRId64 $sPRId64 /**/
#$d_PRIu64 PERL_PRIu64 $sPRIu64 /**/
+#$d_PRIo64 PERL_PRIo64 $sPRIo64 /**/
#$d_PRIx64 PERL_PRIx64 $sPRIx64 /**/
/* SELECT_MIN_BITS:
*/
#define STARTPERL "$startperl" /**/
-/* HAS_FGETPOS64:
- * This symbol, if defined, indicates that the fgetpos64 routine is
- * available to getpos files larger than 2 gigabytes.
- */
-/* HAS_FOPEN64:
- * This symbol, if defined, indicates that the fopen64 routine is
- * available to open files larger than 2 gigabytes.
- */
-/* HAS_FREOPEN64:
- * This symbol, if defined, indicates that the freopen64 routine is
- * available to reopen files larger than 2 gigabytes.
- */
-/* HAS_FSEEK64:
- * This symbol, if defined, indicates that the fseek64 routine is
- * available to seek files larger than 2 gigabytes.
- */
-/* HAS_FSEEKO64:
- * This symbol, if defined, indicates that the fseeko64 routine is
- * available to seek files larger than 2 gigabytes.
- */
/* HAS_FSETPOS64:
* This symbol, if defined, indicates that the fsetpos64 routine is
* available to setpos files larger than 2 gigabytes.
*/
-/* HAS_FTELL64:
- * This symbol, if defined, indicates that the ftell64 routine is
- * available to tell files larger than 2 gigabytes.
- */
-/* HAS_FTELLO64:
- * This symbol, if defined, indicates that the ftello64 routine is
- * available to tell files larger than 2 gigabytes.
- */
-/* HAS_TMPFILE64:
- * This symbol, if defined, indicates that the tmpfile64 routine is
- * available to tmpfile files larger than 2 gigabytes.
- */
-#$d_fgetpos64 HAS_FGETPOS64 /**/
-#$d_fopen64 HAS_FOPEN64 /**/
-#$d_freopen64 HAS_FREOPEN64 /**/
-#$d_fseek64 HAS_FSEEK64 /**/
-#$d_fseeko64 HAS_FSEEKO64 /**/
#$d_fsetpos64 HAS_FSETPOS64 /**/
-#$d_ftell64 HAS_FTELL64 /**/
-#$d_ftello64 HAS_FTELLO64 /**/
-#$d_tmpfile64 HAS_TMPFILE64 /**/
/* HAS_STDIO_STREAM_ARRAY:
* This symbol, if defined, tells that there is an array
*/
#$use64bits USE_64_BITS /**/
+/* USE_LONG_DOUBLE:
+ * This symbol, if defined, indicates that long doubles should
+ * be used when available.
+ */
+#$uselongdouble USE_LONG_DOUBLE /**/
+
/* MULTIPLICITY:
* This symbol, if defined, indicates that Perl should
* be built to use multiplicity.
projects / p5sagit/p5-mst-13.2.git / blobdiff