* that running config_h.SH again will wipe out any changes you've made.
* For a more permanent change edit config.sh and rerun config_h.SH.
*
- * $Id: Config_h.U,v 3.0.1.3 1995/01/30 14:25:39 ram Exp $
+ * $Id: Config_h.U,v 3.0.1.4 1995/09/25 09:10:49 ram Exp $
*/
-/* Configuration time: Fri Jun 2 14:50:10 EDT 1995
- * Configured by: andy
- * Target system: crystal crystal 3.2 2 i386
+/* Configuration time: Wed Sep 11 15:24:25 EDT 1996
+ * Configured by: doughera
+ * Target system: sunos fractal 5.5 generic i86pc i386 i86pc
*/
#ifndef _config_h_
*/
#define MEM_ALIGNBYTES 4 /**/
-/* ARCHLIB_EXP:
- * This symbol contains the ~name expanded version of ARCHLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define ARCHLIB_EXP "/usr/local/lib/perl5/i386-isc" /**/
-
/* BIN:
* This symbol holds the path of the bin directory where the package will
* be installed. Program must be prepared to deal with ~name substitution.
*/
-#define BIN "/usr/local/bin" /**/
-
-/* BYTEORDER:
- * This symbol hold the hexadecimal constant defined in byteorder,
- * i.e. 0x1234 or 0x4321, etc...
- */
-#define BYTEORDER 0x1234 /* large digits for MSB */
+#define BIN "/opt/perl/bin" /**/
/* CAT2:
* This macro catenates 2 tokens together.
/* STRINGIFY:
* This macro surrounds its token with double quotes.
*/
-#if 1 == 1
+#if 42 == 1
#define CAT2(a,b)a/**/b
#define CAT3(a,b,c)a/**/b/**/c
#define CAT4(a,b,c,d)a/**/b/**/c/**/d
#define STRINGIFY(a)"a"
/* If you can get stringification with catify, tell me how! */
#endif
-#if 1 == 42
+#if 42 == 42
#define CAT2(a,b)a ## b
#define CAT3(a,b,c)a ## b ## c
#define CAT4(a,b,c,d)a ## b ## c ## d
* This symbol indicates the C compiler can check for function attributes,
* such as printf formats. This is normally only supported by GNU cc.
*/
-/*#define HASATTRIBUTE /**/
+/*#define HASATTRIBUTE / **/
#ifndef HASATTRIBUTE
#define __attribute__(_arg_)
#endif
* This symbol is defined if the C compiler can cast negative
* or large floating point numbers to 32-bit ints.
*/
-/*#define CASTI32 /**/
+#define CASTI32 /**/
/* CASTNEGFLOAT:
* This symbol is defined if the C compiler can cast negative
* 2 = couldn't cast >= 0x80000000
* 4 = couldn't cast in argument expression list
*/
-/*#define CASTNEGFLOAT /**/
-#define CASTFLAGS 7 /**/
+#define CASTNEGFLOAT /**/
+#define CASTFLAGS 0 /**/
/* HAS_CHOWN:
* This symbol, if defined, indicates that the chown routine is
* This symbol, if defined, indicates that the chsize routine is available
* to truncate files. You might need a -lx to get this routine.
*/
-/*#define HAS_CHSIZE /**/
+/*#define HAS_CHSIZE / **/
/* VOID_CLOSEDIR:
* This symbol, if defined, indicates that the closedir() routine
* does not return a value.
*/
-/*#define VOID_CLOSEDIR /**/
+/*#define VOID_CLOSEDIR / **/
/* HASCONST:
* This symbol, if defined, indicates that this C compiler knows about
* within your programs. The mere use of the "const" keyword will
* trigger the necessary tests.
*/
-/*#define HASCONST /**/
+#define HASCONST /**/
#ifndef HASCONST
#define const
#endif
* available to return a string describing the last error that
* occurred from a call to dlopen(), dlclose() or dlsym().
*/
-/*#define HAS_DLERROR /**/
-
-/* SETUID_SCRIPTS_ARE_SECURE_NOW:
- * This symbol, if defined, indicates that the bug that prevents
- * setuid scripts from being secure is not present in this kernel.
- */
-/* DOSUID:
- * This symbol, if defined, indicates that the C program should
- * check the script that it is executing for setuid/setgid bits, and
- * attempt to emulate setuid/setgid on systems that have disabled
- * setuid #! scripts because the kernel can't do it securely.
- * It is up to the package designer to make sure that this emulation
- * is done securely. Among other things, it should do an fstat on
- * the script it just opened to make sure it really is a setuid/setgid
- * script, it should make sure the arguments passed correspond exactly
- * to the argument on the #! line, and it should not trust any
- * subprocesses to which it must pass the filename rather than the
- * file descriptor of the script to be executed.
- */
-/*#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
-/*#define DOSUID /**/
+#define HAS_DLERROR /**/
/* HAS_DUP2:
* This symbol, if defined, indicates that the dup2 routine is
* This symbol, if defined, indicates that the fchmod routine is available
* to change mode of opened files. If unavailable, use chmod().
*/
-/*#define HAS_FCHMOD /**/
+#define HAS_FCHMOD /**/
/* HAS_FCHOWN:
* This symbol, if defined, indicates that the fchown routine is available
* to change ownership of opened files. If unavailable, use chown().
*/
-/*#define HAS_FCHOWN /**/
+#define HAS_FCHOWN /**/
/* HAS_FCNTL:
* This symbol, if defined, indicates to the C program that
* This symbol, if defined, indicates that the fgetpos routine is
* available to get the file position indicator, similar to ftell().
*/
-/*#define HAS_FGETPOS /**/
+#define HAS_FGETPOS /**/
/* FLEXFILENAMES:
* This symbol, if defined, indicates that the system supports filenames
* longer than 14 characters.
*/
-/*#define FLEXFILENAMES /**/
+#define FLEXFILENAMES /**/
/* HAS_FLOCK:
* This symbol, if defined, indicates that the flock routine is
* available to do file locking.
*/
-/*#define HAS_FLOCK /**/
+/*#define HAS_FLOCK / **/
/* HAS_FORK:
* This symbol, if defined, indicates that the fork routine is
* This symbol, if defined, indicates that the fsetpos routine is
* available to set the file position indicator, similar to fseek().
*/
-/*#define HAS_FSETPOS /**/
+#define HAS_FSETPOS /**/
-/* Gconvert:
- * This preprocessor macro is defined to convert a floating point
- * number to a string without a trailing decimal point. This
- * emulates the behavior of sprintf("%g"), but is sometimes much more
- * efficient. If gconvert() is not available, but gcvt() drops the
- * trailing decimal point, then gcvt() is used. If all else fails,
- * a macro using sprintf("%g") is used. Arguments for the Gconvert
- * macro are: value, number of digits, whether trailing zeros should
- * be retained, and the output buffer.
- * Possible values are:
- * d_Gconvert='gconvert((x),(n),(t),(b))'
- * d_Gconvert='gcvt((x),(n),(b))'
- * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
- * The last two assume trailing zeros should not be kept.
+/* HAS_GETTIMEOFDAY:
+ * This symbol, if defined, indicates that the gettimeofday() system
+ * call is available for a sub-second accuracy clock. Usually, the file
+ * <sys/resource.h> needs to be included (see I_SYS_RESOURCE).
+ * The type "Timeval" should be used to refer to "struct timeval".
*/
-#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
+/*#define HAS_GETTIMEOFDAY / **/
+#ifdef HAS_GETTIMEOFDAY
+#define Timeval struct timeval /* Structure used by gettimeofday() */
+#endif
/* HAS_GETGROUPS:
* This symbol, if defined, indicates that the getgroups() routine is
* This symbol, if defined, indicates that the gethostent routine is
* available to lookup host names in some data base or other.
*/
-/*#define HAS_GETHOSTENT /**/
+#define HAS_GETHOSTENT /**/
/* HAS_UNAME:
* This symbol, if defined, indicates that the C program may use the
*/
#define HAS_GETLOGIN /**/
-/* HAS_GETPGRP:
- * This symbol, if defined, indicates that the getpgrp routine is
- * available to get the current process group.
- */
-#define HAS_GETPGRP /**/
-
/* HAS_GETPGRP2:
* This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
* routine is available to get the current process group.
*/
-/*#define HAS_GETPGRP2 /**/
+/*#define HAS_GETPGRP2 / **/
/* HAS_GETPPID:
* This symbol, if defined, indicates that the getppid routine is
* This symbol, if defined, indicates that the getpriority routine is
* available to get a process's priority.
*/
-/*#define HAS_GETPRIORITY /**/
+#define HAS_GETPRIORITY /**/
/* HAS_HTONL:
* This symbol, if defined, indicates that the htonl() routine (and
#define HAS_NTOHL /**/
#define HAS_NTOHS /**/
+/* HAS_INET_ATON:
+ * This symbol, if defined, indicates to the C program that the
+ * inet_aton() function is available to parse IP address "dotted-quad"
+ * strings.
+ */
+#define HAS_INET_ATON /**/
+
/* HAS_ISASCII:
* This manifest constant lets the C program know that isascii
* is available.
* to kill process groups. If unavailable, you probably should use kill
* with a negative process number.
*/
-/*#define HAS_KILLPG /**/
+#define HAS_KILLPG /**/
/* HAS_LINK:
* This symbol, if defined, indicates that the link routine is
* This symbol, if defined, indicates that the mblen routine is available
* to find the number of bytes in a multibye character.
*/
-/*#define HAS_MBLEN /**/
+#define HAS_MBLEN /**/
/* HAS_MBSTOWCS:
* This symbol, if defined, indicates that the mbstowcs routine is
* available to covert a multibyte string into a wide character string.
*/
-/*#define HAS_MBSTOWCS /**/
+#define HAS_MBSTOWCS /**/
/* HAS_MBTOWC:
* This symbol, if defined, indicates that the mbtowc routine is available
* to covert a multibyte to a wide character.
*/
-/*#define HAS_MBTOWC /**/
+#define HAS_MBTOWC /**/
/* HAS_MEMCMP:
* This symbol, if defined, indicates that the memcmp routine is available
* only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
* own version.
*/
-/*#define HAS_MEMMOVE /**/
+#define HAS_MEMMOVE /**/
/* HAS_MEMSET:
* This symbol, if defined, indicates that the memset routine is available
*/
#define HAS_PIPE /**/
+/* HAS_POLL:
+ * This symbol, if defined, indicates that the poll routine is
+ * available to poll active file descriptors.
+ */
+#define HAS_POLL /**/
+
/* HAS_READDIR:
* This symbol, if defined, indicates that the readdir routine is
* available to read directory entries. You may have to include
* probably use memmove() or memcpy(). If neither is defined, roll your
* own version.
*/
-/*#define HAS_SAFE_MEMCPY /**/
+/*#define HAS_SAFE_MEMCPY / **/
+
+/* HAS_SANE_MEMCMP:
+ * This symbol, if defined, indicates that the memcmp routine is available
+ * and can be used to compare relative magnitudes of chars with their high
+ * bits set. If it is not defined, roll your own version.
+ */
+/*#define HAS_SANE_MEMCMP / **/
/* HAS_SELECT:
* This symbol, if defined, indicates that the select routine is
* available to change stderr or stdout from block-buffered or unbuffered
* to a line-buffered mode.
*/
-/*#define HAS_SETLINEBUF /**/
+#define HAS_SETLINEBUF /**/
/* HAS_SETLOCALE:
* This symbol, if defined, indicates that the setlocale routine is
*/
#define HAS_SETLOCALE /**/
-/* HAS_SETPGID:
- * This symbol, if defined, indicates that the setpgid routine is
- * available to set process group ID.
- */
-#define HAS_SETPGID /**/
-
-/* HAS_SETPGRP:
- * This symbol, if defined, indicates that the setpgrp routine is
- * available to set the current process group.
- */
-/* USE_BSDPGRP:
- * This symbol, if defined, indicates that the BSD notion of process
- * group is to be used. For instance, you have to say setpgrp(pid, pgrp)
- * instead of the USG setpgrp().
- */
-#define HAS_SETPGRP /**/
-/*#define USE_BSDPGRP /**/
-
/* HAS_SETPGRP2:
* This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
* routine is available to set the current process group.
*/
-/*#define HAS_SETPGRP2 /**/
+/*#define HAS_SETPGRP2 / **/
/* HAS_SETPRIORITY:
* This symbol, if defined, indicates that the setpriority routine is
* available to set a process's priority.
*/
-/*#define HAS_SETPRIORITY /**/
+#define HAS_SETPRIORITY /**/
/* HAS_SETREGID:
* This symbol, if defined, indicates that the setregid routine is
* process.
*/
#define HAS_SETREGID /**/
-/*#define HAS_SETRESGID /**/
+/*#define HAS_SETRESGID / **/
/* HAS_SETREUID:
* This symbol, if defined, indicates that the setreuid routine is
* process.
*/
#define HAS_SETREUID /**/
-/*#define HAS_SETRESUID /**/
+/*#define HAS_SETRESUID / **/
/* HAS_SETRGID:
* This symbol, if defined, indicates that the setrgid routine is available
* to change the real gid of the current program.
*/
-/*#define HAS_SETRGID /**/
+/*#define HAS_SETRGID / **/
/* HAS_SETRUID:
* This symbol, if defined, indicates that the setruid routine is available
* to change the real uid of the current program.
*/
-/*#define HAS_SETRUID /**/
+/*#define HAS_SETRUID / **/
/* HAS_SETSID:
* This symbol, if defined, indicates that the setsid routine is
* but not always right so it should be emitted by the program only
* when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
*/
-#define Shmat_t char * /**/
-/*#define HAS_SHMAT_PROTOTYPE /**/
+#define Shmat_t void * /**/
+#define HAS_SHMAT_PROTOTYPE /**/
+
+/* HAS_SIGACTION:
+ * This symbol, if defined, indicates that Vr4's sigaction() routine
+ * is available.
+ */
+#define HAS_SIGACTION /**/
/* HAS_SOCKET:
* This symbol, if defined, indicates that the BSD socket interface is
* supported.
*/
#define HAS_SOCKET /**/
-/*#define HAS_SOCKETPAIR /**/
+#define HAS_SOCKETPAIR /**/
/* USE_STAT_BLOCKS:
* This symbol is defined if this system has a stat structure declaring
* st_blksize and st_blocks.
*/
-/*#define USE_STAT_BLOCKS /**/
+#define USE_STAT_BLOCKS /**/
/* USE_STDIO_PTR:
* This symbol is defined if the _ptr and _cnt fields (or similar)
* and FILE_cnt(fp) macros will also be defined and should be used
* to access these fields.
*/
-/* USE_STDIO_BASE:
- * This symbol is defined if the _base field (or similar) of the
- * stdio FILE structure can be used to access the stdio buffer for
- * a file handle. If this is defined, then the FILE_base(fp) macro
- * will also be defined and should be used to access this field.
- * Also, the FILE_bufsiz(fp) macro will be defined and should be used
- * to determine the number of bytes in the buffer. USE_STDIO_BASE
- * will never be defined unless USE_STDIO_PTR is.
- */
-#define USE_STDIO_PTR /**/
-#define USE_STDIO_BASE /**/
-
/* FILE_ptr:
* This macro is used to access the _ptr field (or equivalent) of the
* FILE structure pointed to by its argument. This macro will always be
* This symbol is defined if the FILE_cnt macro can be used as an
* lvalue.
*/
+/* FILE_filbuf:
+ * This macro is used to access the internal stdio _filbuf function
+ * (or equivalent), if STDIO_CNT_LVALUE and STDIO_PTR_LVALUE
+ * are defined. It is typically either _filbuf or __filbuf.
+ * This macro will only be defined if both STDIO_CNT_LVALUE and
+ * STDIO_PTR_LVALUE are defined.
+ */
+#define USE_STDIO_PTR /**/
#ifdef USE_STDIO_PTR
#define FILE_ptr(fp) ((fp)->_ptr)
-#define STDIO_PTR_LVALUE
+#define STDIO_PTR_LVALUE /**/
#define FILE_cnt(fp) ((fp)->_cnt)
-#define STDIO_CNT_LVALUE
+#define STDIO_CNT_LVALUE /**/
+#if defined(STDIO_PTR_LVALUE) && defined(STDIO_CNT_LVALUE)
+#define FILE_filbuf(fp) _filbuf(fp) /**/
+#endif
#endif
+/* USE_STDIO_BASE:
+ * This symbol is defined if the _base field (or similar) of the
+ * stdio FILE structure can be used to access the stdio buffer for
+ * a file handle. If this is defined, then the FILE_base(fp) macro
+ * will also be defined and should be used to access this field.
+ * Also, the FILE_bufsiz(fp) macro will be defined and should be used
+ * to determine the number of bytes in the buffer. USE_STDIO_BASE
+ * will never be defined unless USE_STDIO_PTR is.
+ */
/* FILE_base:
* This macro is used to access the _base field (or equivalent) of the
* FILE structure pointed to by its argument. This macro will always be
* structure pointed to its argument. This macro will always be defined
* if USE_STDIO_BASE is defined.
*/
+#define USE_STDIO_BASE /**/
#ifdef USE_STDIO_BASE
#define FILE_base(fp) ((fp)->_base)
#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
* functions are available for string searching.
*/
#define HAS_STRCHR /**/
-/*#define HAS_INDEX /**/
+/*#define HAS_INDEX / **/
/* HAS_STRCOLL:
* This symbol, if defined, indicates that the strcoll routine is
#define HAS_SYS_ERRLIST /**/
#define Strerror(e) strerror(e)
+/* HAS_STRTOD:
+ * This symbol, if defined, indicates that the strtod routine is
+ * available to translate strings to doubles.
+ */
+#define HAS_STRTOD /**/
+
+/* HAS_STRTOL:
+ * This symbol, if defined, indicates that the strtol routine is
+ * available to translate strings to integers.
+ */
+#define HAS_STRTOL /**/
+
+/* HAS_STRTOUL:
+ * This symbol, if defined, indicates that the strtoul routine is
+ * available to translate strings to integers.
+ */
+#define HAS_STRTOUL /**/
+
/* HAS_STRXFRM:
* This symbol, if defined, indicates that the strxfrm() routine is
* available to transform strings.
* This symbol, if defined, indicates that the truncate routine is
* available to truncate files.
*/
-/*#define HAS_TRUNCATE /**/
+#define HAS_TRUNCATE /**/
/* HAS_TZNAME:
* This symbol, if defined, indicates that the tzname[] array is
/* HAS_VFORK:
* This symbol, if defined, indicates that vfork() exists.
*/
-/*#define HAS_VFORK /**/
+/*#define HAS_VFORK / **/
/* Signal_t:
* This symbol's value is either "void" or "int", corresponding to the
* This symbol, if defined, indicates that this C compiler knows about
* the volatile declaration.
*/
-/*#define HASVOLATILE /**/
+#define HASVOLATILE /**/
#ifndef HASVOLATILE
#define volatile
#endif
* symbol.
*/
#define HAS_VPRINTF /**/
-/*#define USE_CHAR_VSPRINTF /**/
+/*#define USE_CHAR_VSPRINTF / **/
/* HAS_WAIT4:
* This symbol, if defined, indicates that wait4() exists.
*/
-/*#define HAS_WAIT4 /**/
+#define HAS_WAIT4 /**/
/* HAS_WAITPID:
* This symbol, if defined, indicates that the waitpid routine is
* This symbol, if defined, indicates that the wcstombs routine is
* available to convert wide character strings to multibyte strings.
*/
-/*#define HAS_WCSTOMBS /**/
+#define HAS_WCSTOMBS /**/
/* HAS_WCTOMB:
* This symbol, if defined, indicates that the wctomb routine is available
* to covert a wide character to a multibyte.
*/
-/*#define HAS_WCTOMB /**/
+#define HAS_WCTOMB /**/
/* Fpos_t:
* This symbol holds the type used to declare file positions in libc.
* portably declare your directory entries.
*/
#define I_DIRENT /**/
-/*#define DIRNAMLEN /**/
+/*#define DIRNAMLEN / **/
#define Direntry_t struct dirent
/* I_DLFCN:
* This symbol, if defined, indicates that <dlfcn.h> exists and should
* be included.
*/
-/*#define I_DLFCN /**/
+#define I_DLFCN /**/
/* I_FCNTL:
* This manifest constant tells the C program to include <fcntl.h>.
* This symbol, if defined, indicates to the C program that it should
* include <memory.h>.
*/
-/*#define I_MEMORY /**/
+/*#define I_MEMORY / **/
/* I_NDBM:
* This symbol, if defined, indicates that <ndbm.h> exists and should
* This symbol, if defined, indicates that <net/errno.h> exists and
* should be included.
*/
-#define I_NET_ERRNO /**/
+/*#define I_NET_ERRNO / **/
/* I_NETINET_IN:
* This symbol, if defined, indicates to the C program that it should
* contains pw_comment.
*/
#define I_PWD /**/
-/*#define PWQUOTA /**/
+/*#define PWQUOTA / **/
#define PWAGE /**/
-/*#define PWCHANGE /**/
-/*#define PWCLASS /**/
-/*#define PWEXPIRE /**/
+/*#define PWCHANGE / **/
+/*#define PWCLASS / **/
+/*#define PWEXPIRE / **/
#define PWCOMMENT /**/
/* I_STDDEF:
* This symbol, if defined, indicates to the C program that it should
* include <sys/dir.h>.
*/
-#define I_SYS_DIR /**/
+/*#define I_SYS_DIR / **/
/* I_SYS_FILE:
* This symbol, if defined, indicates to the C program that it should
* include <sys/file.h> to get definition of R_OK and friends.
*/
-/*#define I_SYS_FILE /**/
+/*#define I_SYS_FILE / **/
/* I_SYS_IOCTL:
* This symbol, if defined, indicates that <sys/ioctl.h> exists and should
* This symbol, if defined, indicates to the C program that it should
* include <sys/ndir.h>.
*/
-/*#define I_SYS_NDIR /**/
+/*#define I_SYS_NDIR / **/
/* I_SYS_PARAM:
* This symbol, if defined, indicates to the C program that it should
*/
#define I_SYS_PARAM /**/
+/* I_SYS_RESOURCE:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/resource.h>.
+ */
+#define I_SYS_RESOURCE /**/
+
/* I_SYS_SELECT:
* This symbol, if defined, indicates to the C program that it should
* include <sys/select.h> in order to get definition of struct timeval.
*/
-/*#define I_SYS_SELECT /**/
+#define I_SYS_SELECT /**/
/* I_SYS_TIMES:
* This symbol, if defined, indicates to the C program that it should
*/
#define I_SYS_TYPES /**/
+/* I_SYS_UN:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/un.h> to get UNIX domain socket definitions.
+ */
+#define I_SYS_UN /**/
+
+/* I_SYS_WAIT:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/wait.h>.
+ */
+#define I_SYS_WAIT /**/
+
/* I_TERMIO:
* This symbol, if defined, indicates that the program should include
* <termio.h> rather than <sgtty.h>. There are also differences in
* <sgtty.h> rather than <termio.h>. There are also differences in
* the ioctl() calls that depend on the value of this symbol.
*/
-/*#define I_TERMIO /**/
+/*#define I_TERMIO / **/
#define I_TERMIOS /**/
-/*#define I_SGTTY /**/
+/*#define I_SGTTY / **/
/* I_TIME:
* This symbol, if defined, indicates to the C program that it should
* This symbol, if defined, indicates to the C program that it should
* include <sys/time.h> with KERNEL defined.
*/
-/*#define I_TIME /**/
+/*#define I_TIME / **/
#define I_SYS_TIME /**/
-/*#define I_SYS_TIME_KERNEL /**/
+/*#define I_SYS_TIME_KERNEL / **/
/* I_UNISTD:
* This symbol, if defined, indicates to the C program that it should
* This symbol, if defined, indicates to the C program that it should
* include <varargs.h>.
*/
-/*#define I_STDARG /**/
-#define I_VARARGS /**/
+#define I_STDARG /**/
+/*#define I_VARARGS / **/
/* I_VFORK:
* This symbol, if defined, indicates to the C program that it should
* include vfork.h.
*/
-/*#define I_VFORK /**/
+/*#define I_VFORK / **/
/* INTSIZE:
* This symbol contains the size of an int, so that the C preprocessor
*/
#define Mode_t mode_t /* file mode parameter for system calls */
-/* PRIVLIB_EXP:
- * This symbol contains the ~name expanded version of PRIVLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define PRIVLIB_EXP "/usr/local/lib/perl5" /**/
-
/* CAN_PROTOTYPE:
* If defined, this macro indicates that the C compiler can handle
* function prototypes.
*
* int main _((int argc, char *argv[]));
*/
-/*#define CAN_PROTOTYPE /**/
+#define CAN_PROTOTYPE /**/
#ifdef CAN_PROTOTYPE
#define _(args) args
#else
* is often a directory that is mounted across diverse architectures.
* Programs must be prepared to deal with ~name expansion.
*/
-#define SCRIPTDIR "/usr/local/bin" /**/
+#define SCRIPTDIR "/opt/perl/script" /**/
/* Select_fd_set_t:
* This symbol holds the type used for the 2nd, 3rd, and 4th
*/
#define Select_fd_set_t fd_set * /**/
-/* SIG_NAME:
- * This symbol contains a list of signal names in order. This is intended
- * to be used as a static array initialization, like this:
- * char *sig_name[] = { SIG_NAME };
- * The signals in the list are separated with commas, and each signal
- * is surrounded by double quotes. There is no leading SIG in the signal
- * name, i.e. SIGQUIT is known as "QUIT".
- */
-#define SIG_NAME "ZERO","HUP","INT","QUIT","ILL","TRAP","ABRT","EMT","FPE","KILL","BUS","SEGV","SYS","PIPE","ALRM","TERM","USR1","USR2","CLD","PWR","WINCH","21","POLL","CONT","STOP","TSTP","TTIN","TTOU" /**/
-
/* Size_t:
* This symbol holds the type used to declare length parameters
* for string functions. It is usually size_t, but may be
*/
#define Size_t size_t /* length paramater for string functions */
-/* SSize_t:
- * This symbol holds the type used by functions that return
- * a count of bytes or an error condition. It must be a signed type.
- * It is usually ssize_t, but may be long or int, etc.
- * It may be necessary to include <sys/types.h> or <unistd.h>
- * to get any typedef'ed information.
- * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
- */
-#define SSize_t int /* signed count of bytes */
-
/* STDCHAR:
* This symbol is defined to be the type of char used in stdio.h.
* It has the values "unsigned char" or "char".
*/
#define Uid_t uid_t /* UID type */
-/* VOIDFLAGS:
- * This symbol indicates how much support of the void type is given by this
- * compiler. What various bits mean:
- *
- * 1 = supports declaration of void
- * 2 = supports arrays of pointers to functions returning void
- * 4 = supports comparisons between pointers to void functions and
- * addresses of void functions
- * 8 = suports declaration of generic void pointers
- *
- * The package designer should define VOIDUSED to indicate the requirements
- * of the package. This can be done either by #defining VOIDUSED before
- * including config.h, or by defining defvoidused in Myinit.U. If the
- * latter approach is taken, only those flags will be tested. If the
- * level of void support necessary is not present, defines void to int.
+/* LOC_SED:
+ * This symbol holds the complete pathname to the sed program.
*/
-#ifndef VOIDUSED
-#define VOIDUSED 15
-#endif
-#define VOIDFLAGS 15
-#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
-#define void int /* is void to be avoided? */
-#define M_VOID /* Xenix strikes again */
-#endif
+#define LOC_SED "/bin/sed" /**/
-/* VMS:
- * This symbol, if defined, indicates that the program is running under
- * VMS. It is currently only set in conjunction with the EUNICE symbol.
+/* OSNAME:
+ * This symbol contains the name of the operating system, as determined
+ * by Configure. You shouldn't rely on it too much; the specific
+ * feature tests from Configure are generally more reliable.
*/
-/*#define VMS /**/
+#define OSNAME "solaris" /**/
-/* LOC_SED:
- * This symbol holds the complete pathname to the sed program.
+/* ARCHLIB:
+ * This variable, if defined, holds the name of the directory in
+ * which the user wants to put architecture-dependent public
+ * library files for perl5. It is most often a local directory
+ * such as /usr/local/lib. Programs using this variable must be
+ * prepared to deal with filename expansion. If ARCHLIB is the
+ * same as PRIVLIB, it is not defined, since presumably the
+ * program already searches PRIVLIB.
*/
-#define LOC_SED "/bin/sed" /**/
+/* ARCHLIB_EXP:
+ * This symbol contains the ~name expanded version of ARCHLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define ARCHLIB "/opt/perl/lib/i86pc-solaris/5.00305" /**/
+#define ARCHLIB_EXP "/opt/perl/lib/i86pc-solaris/5.00305" /**/
+
+/* BINCOMPAT3:
+ * This symbol, if defined, indicates that Perl 5.004 should be
+ * binary-compatible with Perl 5.003.
+ */
+#define BINCOMPAT3 /**/
+
+/* BYTEORDER:
+ * This symbol holds the hexadecimal constant defined in byteorder,
+ * i.e. 0x1234 or 0x4321, etc...
+ * On NeXT 4 (and greater), you can build "Fat" Multiple Architecture
+ * Binaries (MAB) on either big endian or little endian machines.
+ * The endian-ness is available at compile-time. This only matters
+ * for perl, where the config.h can be generated and installed on
+ * one system, and used by a different architecture to build an
+ * extension. Older versions of NeXT that might not have
+ * defined either *_ENDIAN__ were all on Motorola 680x0 series,
+ * so the default case (for NeXT) is big endian to catch them.
+ * This might matter for NeXT 3.0.
+ */
+#ifndef NeXT
+#define BYTEORDER 0x1234 /* large digits for MSB */
+#else /* NeXT */
+#ifdef __LITTLE_ENDIAN__
+#define BYTEORDER 0x1234
+#else /* __BIG_ENDIAN__ */
+#define BYTEORDER 0x4321
+#endif /* ENDIAN CHECK */
+#endif /* NeXT */
/* CSH:
* This symbol, if defined, indicates that the C-shell exists.
* makes sense if you *have* dlsym, which we will presume is the
* case if you're using dl_dlopen.xs.
*/
-/*#define DLSYM_NEEDS_UNDERSCORE /* */
+/*#define DLSYM_NEEDS_UNDERSCORE / **/
+
+/* SETUID_SCRIPTS_ARE_SECURE_NOW:
+ * This symbol, if defined, indicates that the bug that prevents
+ * setuid scripts from being secure is not present in this kernel.
+ */
+/* DOSUID:
+ * This symbol, if defined, indicates that the C program should
+ * check the script that it is executing for setuid/setgid bits, and
+ * attempt to emulate setuid/setgid on systems that have disabled
+ * setuid #! scripts because the kernel can't do it securely.
+ * It is up to the package designer to make sure that this emulation
+ * is done securely. Among other things, it should do an fstat on
+ * the script it just opened to make sure it really is a setuid/setgid
+ * script, it should make sure the arguments passed correspond exactly
+ * to the argument on the #! line, and it should not trust any
+ * subprocesses to which it must pass the filename rather than the
+ * file descriptor of the script to be executed.
+ */
+#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
+/*#define DOSUID / **/
+
+/* Gconvert:
+ * This preprocessor macro is defined to convert a floating point
+ * number to a string without a trailing decimal point. This
+ * emulates the behavior of sprintf("%g"), but is sometimes much more
+ * efficient. If gconvert() is not available, but gcvt() drops the
+ * trailing decimal point, then gcvt() is used. If all else fails,
+ * a macro using sprintf("%g") is used. Arguments for the Gconvert
+ * macro are: value, number of digits, whether trailing zeros should
+ * be retained, and the output buffer.
+ * Possible values are:
+ * d_Gconvert='gconvert((x),(n),(t),(b))'
+ * d_Gconvert='gcvt((x),(n),(b))'
+ * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+ * The last two assume trailing zeros should not be kept.
+ */
+#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
+
+/* HAS_GETPGID:
+ * This symbol, if defined, indicates to the C program that
+ * the getpgid(pid) function is available to get the
+ * process group id.
+ */
+#define HAS_GETPGID /**/
+
+/* HAS_GETPGRP:
+ * This symbol, if defined, indicates that the getpgrp routine is
+ * available to get the current process group.
+ */
+/* USE_BSD_GETPGRP:
+ * This symbol, if defined, indicates that getpgrp needs one
+ * arguments whereas USG one needs none.
+ */
+#define HAS_GETPGRP /**/
+/*#define USE_BSD_GETPGRP / **/
+
+/* HAS_SETPGID:
+ * This symbol, if defined, indicates to the C program that
+ * the setpgid(pid, gpid) function is available to set the
+ * process group id.
+ */
+#define HAS_SETPGID /**/
+
+/* HAS_SETPGRP:
+ * This symbol, if defined, indicates that the setpgrp routine is
+ * available to set the current process group.
+ */
+/* USE_BSD_SETPGRP:
+ * This symbol, if defined, indicates that setpgrp needs two
+ * arguments whereas USG one needs none. See also HAS_SETPGID
+ * for a POSIX interface.
+ */
+/* USE_BSDPGRP:
+ * This symbol, if defined, indicates that the BSD notion of process
+ * group is to be used. For instance, you have to say setpgrp(pid, pgrp)
+ * instead of the USG setpgrp(). This should be obsolete since
+ * there are systems which have BSD-ish setpgrp but USG-ish getpgrp.
+ */
+#define HAS_SETPGRP /**/
+/*#define USE_BSD_SETPGRP / **/
+/*#define USE_BSDPGRP / **/
+
+/* USE_SFIO:
+ * This symbol, if defined, indicates that sfio should
+ * be used.
+ */
+/*#define USE_SFIO / **/
+
+/* Sigjmp_buf:
+ * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+ */
+/* Sigsetjmp:
+ * This macro is used in the same way as sigsetjmp(), but will invoke
+ * traditional setjmp() if sigsetjmp isn't available.
+ * See HAS_SIGSETJMP.
+ */
+/* Siglongjmp:
+ * This macro is used in the same way as siglongjmp(), but will invoke
+ * traditional longjmp() if siglongjmp isn't available.
+ * See HAS_SIGSETJMP.
+ */
+#define HAS_SIGSETJMP /**/
+#ifdef HAS_SIGSETJMP
+#define Sigjmp_buf sigjmp_buf
+#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
+#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
+#else
+#define Sigjmp_buf jmp_buf
+#define Sigsetjmp(buf,save_mask) setjmp((buf))
+#define Siglongjmp(buf,retval) longjmp((buf),(retval))
+#endif
/* USE_DYNAMIC_LOADING:
* This symbol, if defined, indicates that dynamic loading of
* some sort is available.
*/
-/*#define USE_DYNAMIC_LOADING /**/
+#define USE_DYNAMIC_LOADING /**/
+
+/* I_DBM:
+ * This symbol, if defined, indicates that <dbm.h> exists and should
+ * be included.
+ */
+/* I_RPCSVC_DBM:
+ * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
+ * should be included.
+ */
+/*#define I_DBM / **/
+#define I_RPCSVC_DBM /**/
+
+/* I_LOCALE:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <locale.h>.
+ */
+#define I_LOCALE /**/
+
+/* I_SFIO:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sfio.h>.
+ */
+/*#define I_SFIO / **/
/* I_SYS_STAT:
* This symbol, if defined, indicates to the C program that it should
*/
#define I_SYS_STAT /**/
+/* I_VALUES:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <values.h> to get definition of symbols like MINFLOAT or
+ * MAXLONG, i.e. machine dependant limitations. Probably, you
+ * should use <limits.h> instead, if it is available.
+ */
+#define I_VALUES /**/
+
/* Free_t:
* This variable contains the return type of free(). It is usually
* void, but occasionally int.
/* Malloc_t:
* This symbol is the type of pointer returned by malloc and realloc.
*/
-#define Malloc_t char * /**/
+#define Malloc_t void * /**/
#define Free_t void /**/
/* MYMALLOC:
*/
#define MYMALLOC /**/
+/* VAL_O_NONBLOCK:
+ * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
+ * non-blocking I/O for the file descriptor. Note that there is no way
+ * back, i.e. you cannot turn it blocking again this way. If you wish to
+ * alternatively switch between blocking and non-blocking, use the
+ * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
+ */
+/* VAL_EAGAIN:
+ * This symbol holds the errno error code set by read() when no data was
+ * present on the non-blocking file descriptor.
+ */
+/* RD_NODATA:
+ * This symbol holds the return code from read() when no data is present
+ * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
+ * not defined, then you can't distinguish between no data and EOF by
+ * issuing a read(). You'll have to find another way to tell for sure!
+ */
+/* EOF_NONBLOCK:
+ * This symbol, if defined, indicates to the C program that a read() on
+ * a non-blocking file descriptor will return 0 on EOF, and not the value
+ * held in RD_NODATA (-1 usually, in that case!).
+ */
+#define VAL_O_NONBLOCK O_NONBLOCK
+#define VAL_EAGAIN EAGAIN
+#define RD_NODATA -1
+#define EOF_NONBLOCK
+
+/* OLDARCHLIB:
+ * This variable, if defined, holds the name of the directory in
+ * which the user has perl5.000 or perl5.001 architecture-dependent
+ * public library files for perl5. For the most part, these
+ * files will work with 5.002 (and later), but that is not
+ * guaranteed.
+ */
+/* OLDARCHLIB_EXP:
+ * This symbol contains the ~name expanded version of OLDARCHLIB, to be
+ * used in programs that are not prepared to deal with ~ expansion at
+ * run-time.
+ */
+/*#define OLDARCHLIB "" / **/
+/*#define OLDARCHLIB_EXP "" / **/
+
+/* PRIVLIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ */
+/* PRIVLIB_EXP:
+ * This symbol contains the ~name expanded version of PRIVLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define PRIVLIB "/opt/perl/lib" /**/
+#define PRIVLIB_EXP "/opt/perl/lib" /**/
+
+/* SH_PATH:
+ * This symbol contains the full pathname to the shell used on this
+ * on this system to execute Bourne shell scripts. Usually, this will be
+ * /bin/sh, though it's possible that some systems will have /bin/ksh,
+ * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
+ * D:/bin/sh.exe.
+ */
+#define SH_PATH "/bin/sh" /**/
+
+/* SIG_NAME:
+ * This symbol contains a list of signal names in order of
+ * signal number. This is intended
+ * to be used as a static array initialization, like this:
+ * char *sig_name[] = { SIG_NAME };
+ * The signals in the list are separated with commas, and each signal
+ * is surrounded by double quotes. There is no leading SIG in the signal
+ * name, i.e. SIGQUIT is known as "QUIT".
+ * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
+ * etc., where nn is the actual signal number (e.g. NUM37).
+ * The signal number for sig_name[i] is stored in sig_num[i].
+ * The last element is 0 to terminate the list with a NULL. This
+ * corresponds to the 0 at the end of the sig_num list.
+ */
+/* SIG_NUM:
+ * This symbol contains a list of signal numbers, in the same order as the
+ * SIG_NAME list. It is suitable for static array initialization, as in:
+ * int sig_num[] = { SIG_NUM };
+ * The signals in the list are separated with commas, and the indices
+ * within that list and the SIG_NAME list match, so it's easy to compute
+ * the signal name from a number or vice versa at the price of a small
+ * dynamic linear lookup.
+ * Duplicates are allowed, but are moved to the end of the list.
+ * The signal number corresponding to sig_name[i] is sig_number[i].
+ * if (i < NSIG) then sig_number[i] == i.
+ * The last element is 0, corresponding to the 0 at the end of
+ * the sig_name list.
+ */
+#define SIG_NAME "ZERO","HUP","INT","QUIT","ILL","TRAP","ABRT","EMT","FPE","KILL","BUS","SEGV","SYS","PIPE","ALRM","TERM","USR1","USR2","CHLD","PWR","WINCH","URG","IO","STOP","TSTP","CONT","TTIN","TTOU","VTALRM","PROF","XCPU","XFSZ","WAITING","LWP","FREEZE","THAW","CANCEL","RTMIN","NUM38","NUM39","NUM40","NUM41","NUM42","NUM43","RTMAX","IOT","CLD","POLL",0 /**/
+#define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,6,18,22,0 /**/
+
+/* SITEARCH:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * Individual sites may place their own extensions and modules in
+ * this directory.
+ */
+/* SITEARCH_EXP:
+ * This symbol contains the ~name expanded version of SITEARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define SITEARCH "/opt/perl/lib/site_perl/i86pc-solaris" /**/
+#define SITEARCH_EXP "/opt/perl/lib/site_perl/i86pc-solaris" /**/
+
+/* SITELIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * Individual sites may place their own extensions and modules in
+ * this directory.
+ */
/* SITELIB_EXP:
* This symbol contains the ~name expanded version of SITELIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-/*#define SITELIB_EXP "" /**/
+#define SITELIB "/opt/perl/lib/site_perl" /**/
+#define SITELIB_EXP "/opt/perl/lib/site_perl" /**/
+
+/* SSize_t:
+ * This symbol holds the type used by functions that return
+ * a count of bytes or an error condition. It must be a signed type.
+ * It is usually ssize_t, but may be long or int, etc.
+ * It may be necessary to include <sys/types.h> or <unistd.h>
+ * to get any typedef'ed information.
+ * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
+ */
+#define SSize_t ssize_t /* signed count of bytes */
+
+/* STARTPERL:
+ * This variable contains the string to put in front of a perl
+ * script to make sure (one hopes) that it runs with perl and not
+ * some shell.
+ */
+#define STARTPERL "#!/opt/perl/bin/perl" /**/
+
+/* USE_PERLIO:
+ * This symbol, if defined, indicates that the PerlIO abstraction should
+ * be used throughout. If not defined, stdio should be
+ * used in a fully backward compatible manner.
+ */
+/*#define USE_PERLIO / **/
+
+/* VOIDFLAGS:
+ * This symbol indicates how much support of the void type is given by this
+ * compiler. What various bits mean:
+ *
+ * 1 = supports declaration of void
+ * 2 = supports arrays of pointers to functions returning void
+ * 4 = supports comparisons between pointers to void functions and
+ * addresses of void functions
+ * 8 = suports declaration of generic void pointers
+ *
+ * The package designer should define VOIDUSED to indicate the requirements
+ * of the package. This can be done either by #defining VOIDUSED before
+ * including config.h, or by defining defvoidused in Myinit.U. If the
+ * latter approach is taken, only those flags will be tested. If the
+ * level of void support necessary is not present, defines void to int.
+ */
+#ifndef VOIDUSED
+#define VOIDUSED 15
+#endif
+#define VOIDFLAGS 15
+#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
+#define void int /* is void to be avoided? */
+#define M_VOID /* Xenix strikes again */
+#endif
#endif