Also note that, as of Perl version 5.005 and later, an ANSI C compliant
compiler is required to build Perl. VAX C is *not* ANSI compliant, as it
died a natural death some time before the standard was set. Therefore
-VAX C will not compile perl 5.005. We are sorry about that.
+VAX C will not compile Perl 5.005 or later. We are sorry about that.
If you are stuck without DEC C (the VAX C license should be good for DEC C,
but the media charges might prohibit an upgrade), consider getting Gnu C
The current sources and build procedures have been tested on a VAX using
DEC C, and on an AXP using DEC C. If you run into problems with
-other compilers, please let us know.
+other compilers, please let us know. (Note: DEC C was renamed to Compaq C
+around version 6.2).
There are issues with various versions of DEC C, so if you're not running a
relatively modern version, check the "DEC C issues" section later on in this
=item 1 A C compiler.
-DEC C or gcc for VMS (AXP or VAX).
+DEC (now Compaq) C or gcc for VMS (AXP or VAX).
=item 2 A make tool.
from Compaq.
http://www.fsf.org/order/ftp.html
- ftp://ftp.uu.net/archive/systems/gnu/diffutils*.tar.gz
- ftp://gatekeeper.dec.com/pub/GNU/diffutils*.tar.gz
- ftp://ftp.gnu.org/pub/gnu/diffutils*.tar.gz
http://www.openvms.compaq.com/freeware/GZIP/
ftp://ftp.compaq.com/pub/VMS/
+ http://www.crinoid.com/utils/
=item 2 VMS TAR
ftp://space.mit.edu/pub/davis/
ftp://ftp.wku.edu/vms/narnia/most.zip
+=item 5 GNU PATCH and DIFFUTILS for VMS
+
+Patches to Perl are usually distributed as GNU unified or contextual diffs.
+Such patches are created by the GNU diff program (part of the diffutils
+distribution) and applied with GNU patch. VMS ports of these utilities are
+available here:
+
+ http://www.crinoid.com/utils/
+
=back
Please note that UNZIP and GUNZIP are not the same thing (they work with
T "LOGICAL"
FOO "LOGICAL"
EXT "LOGICAL"
+ SOME_LOGICAL_NAME_NOT_LIKELY "LOGICAL"
+ DOWN_LOGICAL_NAME_NOT_LIKELY "LOGICAL"
TEST "SYMBOL"
As a handy shortcut, the command:
(note the quotation marks and case) will choose reasonable defaults
automatically (it takes DEC C over Gnu C, DEC C sockets over SOCKETSHR
-sockets, and either over no sockets). More help with configure.com is
-available from:
+sockets, and either over no sockets). Some options can be given
+explicitly on the command line; the following example specifies a
+non-default location for where Perl will be installed:
+
+ @ Configure "-d" "-Dprefix=dka100:[utils.perl5.]"
+
+More help with configure.com is available from:
@ Configure "-h"
=item 2
-Create a directory somewhere and either run @perl_setup or
-define the concealed logical PERL_ROOT to point to it by hand.
-For example,
-
- CREATE/DIRECTORY dka200:[perl]
- @PERL_SETUP
- SHOW LOGICAL PERL_ROOT
-
-or,
-
- CREATE/DIRECTORY dka200:[perl]
- DEFINE/TRANS=(CONC,TERM) PERL_ROOT dka200:[perl.]
+Decide where you want Perl to be installed (unless you have already done so
+by using the "prefix" configuration parameter -- see the example in the
+"Configuring the Perl build" section).
+The DCL script PERL_SETUP.COM that is written by CONFIGURE.COM will help you
+with the definition of the PERL_ROOT and PERLSHR logical names and the PERL
+foreign command symbol. Take a look at PERL_SETUP.COM and modify it if you
+want to. The installation process will execute PERL_SETUP.COM and copy
+files to the directory tree pointed to by the PERL_ROOT logical name defined
+there, so make sure that you have write access to the parent directory of
+what will become the root of your Perl installation.
=item 3
=back
-The DCL script PERL_SETUP.COM that is written by CONFIGURE.COM
-will help you with the definition of PERL_ROOT, PERLSHR and the PERL
-Foreign symbol. Take a look at PERL_SETUP.COM and modify it if you want
-to. Then copy PERL_SETUP.COM to a place accessible to your perl users.
+Copy PERL_SETUP.COM to a place accessible to your perl users.
+
For example:
COPY PERL_SETUP.COM SYS$LIBRARY:
On systems that are using perl quite a bit, and particularly those with
minimal RAM, you can boost the performance of perl by INSTALLing it as
-a known image. PERLSHR.EXE is typically larger than 2000 blocks
+a known image. PERLSHR.EXE is typically larger than 2500 blocks
and that is a reasonably large amount of IO to load each time perl is
invoked.
there is the VMSPERL mailing list. It is usually a low-volume (10-12
messages a week) mailing list.
-The subscription address is MAJORDOMO@PERL.ORG. Send a mail message with
-just the words SUBSCRIBE VMSPERL in the body of the message.
-
-The VMSPERL mailing list address is VMSPERL@PERL.ORG. Any mail sent there
-gets echoed to all subscribers of the list. There is a searchable archive of
-the list on the web at:
+To subscribe, send a mail message to VMSPERL-SUBSCRIBE@PERL.ORG. The VMSPERL
+mailing list address is VMSPERL@PERL.ORG. Any mail sent there gets echoed
+to all subscribers of the list. There is a searchable archive of the list
+on the web at:
http://www.xray.mpe.mpg.de/mailing-lists/vmsperl/
-To unsubscribe from VMSPERL send the message UNSUBSCRIBE VMSPERL to
-MAJORDOMO@PERL.ORG. Be sure to do so from the subscribed account that
-you are canceling.
+To unsubscribe from VMSPERL send a message to VMSPERL-UNSUBSCRIBE@PERL.ORG.
+Be sure to do so from the subscribed account that you are canceling.
=head2 Web sites
Vmsperl pages on the web include:
http://www.sidhe.org/vmsperl/index.html
+ http://www.crinoid.com/
http://duphy4.physics.drexel.edu/pub/cgi_info.htmlx
- http://www.xray.mpe.mpg.de/mailing-lists/vmsperl/
http://www.cpan.org/modules/by-module/VMS/
+ http://www.xray.mpe.mpg.de/mailing-lists/vmsperl/
http://nucwww.chem.sunysb.edu/htbin/software_list.cgi
http://www.best.com/~pvhp/vms/
http://bkfug.kfunigraz.ac.at/~binder/perl.html
+ http://lists.perl.org/showlist.cgi?name=vmsperl
+ http://archive.develooper.com/vmsperl@perl.org/
=head1 SEE ALSO
=head1 AUTHORS
-Last revised 25-February-2000 by Peter Prymmer pvhp@best.com.
-Revised 27-October-1999 by Craig Berry craig.berry@metamorgs.com.
+Revised 5-April-2001 by Craig Berry craigberry@mac.com.
+Revised 25-February-2000 by Peter Prymmer pvhp@best.com.
+Revised 27-October-1999 by Craig Berry craigberry@mac.com.
Revised 01-March-1999 by Dan Sugalski dan@sidhe.org.
Originally by Charles Bailey bailey@newman.upenn.edu.
projects / p5sagit/p5-mst-13.2.git / blobdiff