-
-This document is written in pod format hence there are punctuation
-characters in odd places. Do not worry, you've apparently got
-the ASCII->EBCDIC translation worked out correctly. You can read
-more about pod in pod/perlpod.pod or the short summary in the
-INSTALL file.
+This document is written in pod format hence there are punctuation
+characters in odd places. Do not worry, you've apparently got the
+ASCII->EBCDIC translation worked out correctly. You can read more
+about pod in pod/perlpod.pod or the short summary in the INSTALL file.
=head1 NAME
-README.os390 - building and installing Perl for OS/390.
+README.os390 - building and installing Perl for OS/390 and z/OS
=head1 SYNOPSIS
This document will help you Configure, build, test and install Perl
-on OS/390 Unix System Services.
+on OS/390 (aka z/OS) Unix System Services.
=head1 DESCRIPTION
-This is a fully ported Perl for OS/390 Version 2 Release 3, 5, 6, 7,
-8, and 9. It may work on other versions or releases, but those are
+This is a fully ported Perl for OS/390 Version 2 Release 3, 5, 6, 7,
+8, and 9. It may work on other versions or releases, but those are
the ones we've tested it on.
-You may need to carry out some system configuration tasks before
-running the Configure script for Perl.
+You may need to carry out some system configuration tasks before
+running the Configure script for Perl.
+
+
+=head2 Tools
-=head2 Unpacking
+The z/OS Unix Tools and Toys list may prove helpful and contains links
+to ports of much of the software helpful for building Perl.
+http://www-1.ibm.com/servers/eserver/zseries/zos/unix/bpxa1toy.html
+
+
+=head2 Unpacking Perl distribution on OS/390
Gunzip/gzip for OS/390 is discussed at:
- http://www.s390.ibm.com/products/oe/bpxqp1.html
+ http://www-1.ibm.com/servers/eserver/zseries/zos/unix/faq/bpxqp1.html
to extract an ASCII tar archive on OS/390, try this:
pax -o to=IBM-1047,from=ISO8859-1 -r < latest.tar
-=head2 Setup and utilities
+If you get errors of the form
+
+ tar: FSUM7171 ...: cannot set uid/gid: EDC5139I Operation not permitted.
+ tar: FSUM7148 cannot create file "...": EDC5111I Permission denied.
+
+you didn't read the above and tried to use tar instead of pax.
+
+=head2 Setup and utilities for Perl on OS/390
Be sure that your yacc installation is in place including any necessary
parser template files. If you have not already done so then be sure to:
cp /samples/yyparse.c /etc
-This may also be a good time to ensure that your /etc/protocol file
+This may also be a good time to ensure that your /etc/protocol file
and either your /etc/resolv.conf or /etc/hosts files are in place.
The IBM document that described such USS system setup issues was
SC28-1890-07 "OS/390 UNIX System Services Planning", in particular
Chapter 6 on customizing the OE shell.
-GNU make for OS/390, which is required for the build of perl (as well as
-building CPAN modules and extensions), is available from:
-
- http://www.mks.com/s390/gnu/index.htm
+GNU make for OS/390, which is recommended for the build of perl (as
+well as building CPAN modules and extensions), is available from the
+L</Tools>.
-Some people have reported encountering "Out of memory!" errors while
-trying to build Perl using GNU make binaries. If you encounter such
-trouble then try to download the source code kit and build GNU make
-from source to eliminate any such trouble. You might also find GNU make
-(as well as Perl and Apache) in the red-piece/book "Open Source Software
+Some people have reported encountering "Out of memory!" errors while
+trying to build Perl using GNU make binaries. If you encounter such
+trouble then try to download the source code kit and build GNU make
+from source to eliminate any such trouble. You might also find GNU make
+(as well as Perl and Apache) in the red-piece/book "Open Source Software
for OS/390 UNIX", SG24-5944-00 from IBM.
+If instead of the recommended GNU make you would like to use the system
+supplied make program then be sure to install the default rules file
+properly via the shell command:
+
+ cp /samples/startup.mk /etc
+
+and be sure to also set the environment variable _C89_CCMODE=1 (exporting
+_C89_CCMODE=1 is also a good idea for users of GNU make).
+
+You might also want to have GNU groff for OS/390 installed before
+running the `make install` step for Perl.
+
There is a syntax error in the /usr/include/sys/socket.h header file
that IBM supplies with USS V2R7, V2R8, and possibly V2R9. The problem with
the header file is that near the definition of the SO_REUSEPORT constant
#define SO_REUSEPORT 0x0200 /* allow local address & port
reuse */ /
-You could edit that header yourself to remove that last '/', or you might
-note that Language Environment (LE) APAR PQ39997 describes the problem
+You could edit that header yourself to remove that last '/', or you might
+note that Language Environment (LE) APAR PQ39997 describes the problem
and PTF's UQ46272 and UQ46271 are the (R8 at least) fixes and apply them.
-If left unattended that syntax error will turn up as an inability for Perl
+If left unattended that syntax error will turn up as an inability for Perl
to build its "Socket" extension.
-For successful testing you may need to turn on the sticky bit for your
+For successful testing you may need to turn on the sticky bit for your
world readable /tmp directory if you have not already done so (see man chmod).
-=head2 Configure
+=head2 Configure Perl on OS/390
-Once you've unpacked the distribution, run "sh Configure" (see INSTALL
-for a full discussion of the Configure options). There is a "hints" file
+Once you've unpacked the distribution, run "sh Configure" (see INSTALL
+for a full discussion of the Configure options). There is a "hints" file
for os390 that specifies the correct values for most things. Some things
to watch out for include:
Some of the parser default template files in /samples are needed in /etc.
In particular be sure that you at least copy /samples/yyparse.c to /etc
before running Perl's Configure. This step ensures successful extraction
-of EBCDIC versions of parser files such as perly.c. This has to be done
-before running Configure the first time. If you failed to do so then the
-easiest way to re-Configure Perl is to delete your misconfigured build root
-and re extract the source from the tar ball. If for some reason you do not
-want to do that then, after ensuring that /etc/yyparse.c is properly in place
-run the following commands from within the Perl build directory:
-
- rm -f y.tab.c y.tab.h
- yacc -d perly.y
- mv -f y.tab.c perly.c
- chmod u+w perly.c
- sed -e '/^#include "perl\.h"/a\
- \
- #define yydebug PL_yydebug\
- #define yynerrs PL_yynerrs\
- #define yyerrflag PL_yyerrflag\
- #define yychar PL_yychar\
- #define yyval PL_yyval\
- #define yylval PL_yylval' \
- -e '/YYSTYPE *yyval;/D' \
- -e '/YYSTYPE *yylval;/D' \
- -e '/int yychar,/,/yynerrs;/D' \
- -e 's/int yydebug = 0;/yydebug = 0;/' \
- -e 's/[^_]realloc(/PerlMem_realloc(/g' \
- -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
- -e 's/y\.tab/perly/g' perly.c >perly.tmp
- mv -f perly.tmp perly.c
- mv -f y.tab.h perly.h
- cd x2p
- rm -f y.tab.c y.tab.h
- yacc a2p.y
- mv -f y.tab.c a2p.c
- chmod u+w a2p.c
- sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
- -e 's/y\.tab/a2p/g' a2p.c >a2p.tmp
- mv -f a2p.tmp a2p.c
- mv -f y.tab.h a2p.h
- cd ..
-
-There, easy huh? If you find typing all that in difficult then perhaps
-you should reconsider the rm -rf of the perl build directory and
-re extraction of the source tar ball.
+of EBCDIC versions of parser files such as perly.c, perly.h, and x2p/a2p.c.
+This has to be done before running Configure the first time. If you failed
+to do so then the easiest way to re-Configure Perl is to delete your
+misconfigured build root and re-extract the source from the tar ball.
+Then you must ensure that /etc/yyparse.c is properly in place before
+attempting to re-run Configure.
=item *
-This port doesn't support dynamic loading. Although OS/390 has support
-for DLLs via dllload(), there are some differences that cause problems
-for Perl. (We need a volunteer to write a ext/DynaLoader/dl_dllload.xs
-file).
-
-=item *
+This port will support dynamic loading, but it is not selected by
+default. If you would like to experiment with dynamic loading then
+be sure to specify -Dusedl in the arguments to the Configure script.
+See the comments in hints/os390.sh for more information on dynamic loading.
+If you build with dynamic loading then you will need to add the
+$archlibexp/CORE directory to your LIBPATH environment variable in order
+for perl to work. See the config.sh file for the value of $archlibexp.
+If in trying to use Perl you see an error message similar to:
-A message of the form:
+ CEE3501S The module libperl.dll was not found.
+ From entry point __dllstaticinit at compile unit offset +00000194 at
- shmat() found.
- and it returns (void *).
- *** WHOA THERE!!! ***
- The recommended value for $d_shmatprototype on this machine was "define"!
- Keep the recommended value? [y]
-
-is nothing to worry about at all.
+then your LIBPATH does not have the location of libperl.x and either
+libperl.dll or libperl.so in it. Add that directory to your LIBPATH and
+proceed.
=item *
gethostbyname() works, and make sure that the file
/etc/proto has been renamed to /etc/protocol (NOT
/etc/protocols, as used by other Unix systems).
+You may have to look for things like HOSTNAME and DOMAINORIGIN
+in the "//'SYS1.TCPPARMS(TCPDATA)'" PDS member in order to
+properly set up your /etc networking files.
=back
-=head2 Build, test, install
+=head2 Build, Test, Install Perl on OS/390
Simply put:
on how you answered the questions that Configure asked and whether
or not you have write access to the directories you specified.
-=head2 build anomalies
+=head2 Build Anomalies with Perl on OS/390
"Out of memory!" messages during the build of Perl are most often fixed
by re building the GNU make utility for OS/390 from a source code kit.
Another memory limiting item to check is your MAXASSIZE parameter in your
'SYS1.PARMLIB(BPXPRMxx)' data set (note too that as of V2R8 address space
-limits can be set on a per user ID basis in the USS segment of a RACF
+limits can be set on a per user ID basis in the USS segment of a RACF
profile). People have reported successful builds of Perl with MAXASSIZE
parameters as small as 503316480 (and it may be possible to build Perl
with a MAXASSIZE smaller than that).
-Within USS your /etc/profile or $HOME/.profile may limit your ulimit
+Within USS your /etc/profile or $HOME/.profile may limit your ulimit
settings. Check that the following command returns reasonable values:
ulimit -a
Socket extension then be sure to fix the syntax error in the system
header /usr/include/sys/socket.h.
-=head2 testing anomalies
+=head2 Testing Anomalies with Perl on OS/390
The `make test` step runs a Perl Verification Procedure, usually before
installation. You might encounter STDERR messages even during a successful
from an account with write access to the directory entry for /tmp.
+=item *
+
+Out of Memory!
+
+Recent perl test suite is quite memory hunrgy. In addition to the comments
+above on memory limitations it is also worth checking for _CEE_RUNOPTS
+in your environment. Perl now has (in miniperlmain.c) a C #pragma
+to set CEE run options, but the environment variable wins.
+
+The C code asks for:
+
+ #pragma runopts(HEAP(2M,500K,ANYWHERE,KEEP,8K,4K) STACK(,,ANY,) ALL31(ON))
+
+The important parts of that are the second argument (the increment) to HEAP,
+and allowing the stack to be "Above the (16M) line". If the heap
+increment is too small then when perl (for example loading unicode/Name.pl) tries
+to create a "big" (400K+) string it cannot fit in a single segment
+and you get "Out of Memory!" - even if there is still plenty of memory
+available.
+
+A related issue is use with perl's malloc. Perl's malloc uses C<sbrk()>
+to get memory, and C<sbrk()> is limited to the first allocation so in this
+case something like:
+
+ HEAP(8M,500K,ANYWHERE,KEEP,8K,4K)
+
+is needed to get through the test suite.
+
+
=back
-=head2 Usage Hints
+=head2 Installation Anomalies with Perl on OS/390
+
+The installman script will try to run on OS/390. There will be fewer errors
+if you have a roff utility installed. You can obtain GNU groff from the
+Redbook SG24-5944-00 ftp site.
+
+=head2 Usage Hints for Perl on OS/390
When using perl on OS/390 please keep in mind that the EBCDIC and ASCII
-character sets are different. See perlebcdic.pod for more on such character
-set issues. Perl builtin functions that may behave differently under
+character sets are different. See perlebcdic.pod for more on such character
+set issues. Perl builtin functions that may behave differently under
EBCDIC are also mentioned in the perlport.pod document.
-Open Edition (UNIX System Services) from V2R8 onward does support
-#!/path/to/perl script invocation. There is a PTF available from
+Open Edition (UNIX System Services) from V2R8 onward does support
+#!/path/to/perl script invocation. There is a PTF available from
IBM for V2R7 that will allow shell/kernel support for #!. USS
-releases prior to V2R7 did not support the #! means of script invocation.
+releases prior to V2R7 did not support the #! means of script invocation.
If you are running V2R6 or earlier then see:
head `whence perldoc`
for an example of how to use the "eval exec" trick to ask the shell to
have Perl run your scripts on those older releases of Unix System Services.
-=head2 Modules and Extensions
+If you are having trouble with square brackets then consider switching your
+rlogin or telnet client. Try to avoid older 3270 emulators and ISHELL for
+working with Perl on USS.
+
+=head2 Floating Point Anomalies with Perl on OS/390
+
+There appears to be a bug in the floating point implementation on S/390
+systems such that calling int() on the product of a number and a small
+magnitude number is not the same as calling int() on the quotient of
+that number and a large magnitude number. For example, in the following
+Perl code:
+
+ my $x = 100000.0;
+ my $y = int($x * 1e-5) * 1e5; # '0'
+ my $z = int($x / 1e+5) * 1e5; # '100000'
+ print "\$y is $y and \$z is $z\n"; # $y is 0 and $z is 100000
+
+Although one would expect the quantities $y and $z to be the same and equal
+to 100000 they will differ and instead will be 0 and 100000 respectively.
+
+The problem can be further examined in a roughly equivalent C program:
+
+ #include <stdio.h>
+ #include <math.h>
+ main()
+ {
+ double r1,r2;
+ double x = 100000.0;
+ double y = 0.0;
+ double z = 0.0;
+ x = 100000.0 * 1e-5;
+ r1 = modf (x,&y);
+ x = 100000.0 / 1e+5;
+ r2 = modf (x,&z);
+ printf("y is %e and z is %e\n",y*1e5,z*1e5);
+ /* y is 0.000000e+00 and z is 1.000000e+05 (with c89) */
+ }
+
+=head2 Modules and Extensions for Perl on OS/390
Pure pure (that is non xs) modules may be installed via the usual:
make test
make install
-You can also build xs based extensions to Perl for OS/390 but will need
-to follow the instructions in ExtUtils::MakeMaker for building
-statically linked perl binaries. In the simplest configurations building
-a static perl + xs extension boils down to:
+If you built perl with dynamic loading capability then that would also
+be the way to build xs based extensions. However, if you built perl with
+the default static linking you can still build xs based extensions for OS/390
+but you will need to follow the instructions in ExtUtils::MakeMaker for
+building statically linked perl binaries. In the simplest configurations
+building a static perl + xs extension boils down to:
perl Makefile.PL
make
make install
make -f Makefile.aperl inst_perl MAP_TARGET=perl
-In most cases people have reported better results with GNU make rather
+In most cases people have reported better results with GNU make rather
than the system's /bin/make program, whether for plain modules or for
xs based extensions.
+If the make process encounters trouble with either compilation or
+linking then try setting the _C89_CCMODE to 1. Assuming sh is your
+login shell then run:
+
+ export _C89_CCMODE=1
+
+If tcsh is your login shell then use the setenv command.
+
=head1 AUTHORS
David Fiander and Peter Prymmer with thanks to Dennis Longnecker
and William Raffloer for valuable reports, LPAR and PTF feedback.
Thanks to Mike MacIsaac and Egon Terwedow for SG24-5944-00.
+Thanks to Ignasi Roca for pointing out the floating point problems.
+Thanks to John Goodyear for dynamic loading help.
=head1 SEE ALSO
L<INSTALL>, L<perlport>, L<perlebcdic>, L<ExtUtils::MakeMaker>.
- http://www.mks.com/s390/gnu/index.htm
+ http://www-1.ibm.com/servers/eserver/zseries/zos/unix/bpxa1toy.html
http://www.redbooks.ibm.com/abstracts/sg245944.html
- http://www.s390.ibm.com/products/oe/bpxa1ty1.html#opensrc
-
- http://www.s390.ibm.com/products/oe/portbk/bpxacenv.html
+ http://www-1.ibm.com/servers/eserver/zseries/zos/unix/bpxa1ty1.html#opensrc
http://www.xray.mpe.mpg.de/mailing-lists/perl-mvs/
-=head2 Mailing list
+ http://publibz.boulder.ibm.com:80/cgi-bin/bookmgr_OS390/BOOKS/ceea3030/
+
+ http://publibz.boulder.ibm.com:80/cgi-bin/bookmgr_OS390/BOOKS/CBCUG030/
-The Perl Institute (http://www.perl.org/) maintains a perl-mvs
+=head2 Mailing list for Perl on OS/390
+
+The Perl Institute (http://www.perl.org/) maintains a perl-mvs
mailing list of interest to all folks building and/or
-using perl on all EBCDIC platforms (not just OS/390).
+using perl on all EBCDIC platforms (not just OS/390).
To subscribe, send a message of:
subscribe perl-mvs
-to majordomo@perl.org. There is a web archive of the mailing list at:
+to majordomo@perl.org. See also:
+
+ http://lists.perl.org/showlist.cgi?name=perl-mvs
+
+There are web archives of the mailing list at:
http://www.xray.mpe.mpg.de/mailing-lists/perl-mvs/
+ http://archive.develooper.com/perl-mvs@perl.org/
=head1 HISTORY
This document was podified for the 5.005_03 release of Perl 11 March 1999.
+Updated 28 November 2001 for broken URLs.
+
Updated 12 November 2000 for the 5.7.1 release of Perl.
+Updated 15 January 2001 for the 5.7.1 release of Perl.
+
+Updated 24 January 2001 to mention dynamic loading.
+
+Updated 12 March 2001 to mention //'SYS1.TCPPARMS(TCPDATA)'.
+
=cut