/*
* Package name : perl5
* Source directory : .
- * Configuration time: Mon Jul 6 12:35:32 EDT 1998
- * Configured by : doughera
- * Target system : linux fractal 2.0.34 #1 tue jun 23 10:09:17 edt 1998 i686 unknown
+ * Configuration time: Fri Feb 12 13:48:44 EET 1999
+ * Configured by : jhi
+ * Target system : osf1 alpha.hut.fi v4.0 878 alpha
*/
#ifndef _config_h_
/* LOC_SED:
* This symbol holds the complete pathname to the sed program.
*/
-#define LOC_SED "/bin/sed" /**/
+#define LOC_SED "/usr/bin/sed" /**/
/* BIN:
* This symbol holds the path of the bin directory where the package will
#define BIN "/opt/perl/bin" /**/
#define BIN_EXP "/opt/perl/bin" /**/
-/* CPPSTDIN:
- * This symbol contains the first part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. Typical value of "cc -E" or "/lib/cpp", but it can also
- * call a wrapper. See CPPRUN.
- */
-/* CPPMINUS:
- * This symbol contains the second part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. This symbol will have the value "-" if CPPSTDIN needs a minus
- * to specify standard input, otherwise the value is "".
- */
-#define CPPSTDIN "cc -E"
-#define CPPMINUS "-"
-
/* HAS_ALARM:
* This symbol, if defined, indicates that the alarm routine is
* available.
* This symbol indicates the C compiler can check for function attributes,
* such as printf formats. This is normally only supported by GNU cc.
*/
-#define HASATTRIBUTE /**/
+/*#define HASATTRIBUTE / **/
#ifndef HASATTRIBUTE
#define __attribute__(_arg_)
#endif
*/
#define HAS_GETGROUPS /**/
+/* HAS_GETHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * gethostname() routine to derive the host name. See also HAS_UNAME
+ * and PHOSTNAME.
+ */
/* HAS_UNAME:
* This symbol, if defined, indicates that the C program may use the
* uname() routine to derive the host name. See also HAS_GETHOSTNAME
* and PHOSTNAME.
*/
-#define HAS_UNAME /**/
+/* PHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * contents of PHOSTNAME as a command to feed to the popen() routine
+ * to derive the host name. See also HAS_GETHOSTNAME and HAS_UNAME.
+ * Note that the command uses a fully qualified path, so that it is safe
+ * even if used by a process with super-user privileges.
+ */
+#define HAS_GETHOSTNAME /**/
+/*#define HAS_UNAME / **/
+/*#define PHOSTNAME "" / * How to get the host name */
/* HAS_GETLOGIN:
* This symbol, if defined, indicates that the getlogin routine is
*/
#define HAS_GETPRIORITY /**/
-/* HAS_HTONL:
- * This symbol, if defined, indicates that the htonl() routine (and
- * friends htons() ntohl() ntohs()) are available to do network
- * order byte swapping.
- */
-/* HAS_HTONS:
- * This symbol, if defined, indicates that the htons() routine (and
- * friends htonl() ntohl() ntohs()) are available to do network
- * order byte swapping.
- */
-/* HAS_NTOHL:
- * This symbol, if defined, indicates that the ntohl() routine (and
- * friends htonl() htons() ntohs()) are available to do network
- * order byte swapping.
- */
-/* HAS_NTOHS:
- * This symbol, if defined, indicates that the ntohs() routine (and
- * friends htonl() htons() ntohl()) are available to do network
- * order byte swapping.
- */
-#define HAS_HTONL /**/
-#define HAS_HTONS /**/
-#define HAS_NTOHL /**/
-#define HAS_NTOHS /**/
-
/* HAS_INET_ATON:
* This symbol, if defined, indicates to the C program that the
* inet_aton() function is available to parse IP address "dotted-quad"
*/
#define HAS_MKTIME /**/
-/* HAS_MSG:
- * This symbol, if defined, indicates that the entire msg*(2) library is
- * supported (IPC mechanism based on message queues).
+/* HAS_MSYNC:
+ * This symbol, if defined, indicates that the msync system call is
+ * available to synchronize a mapped file.
*/
-#define HAS_MSG /**/
+#define HAS_MSYNC /**/
+
+/* HAS_MUNMAP:
+ * This symbol, if defined, indicates that the munmap system call is
+ * available to unmap a region, usually mapped by mmap().
+ */
+#define HAS_MUNMAP /**/
/* HAS_NICE:
* This symbol, if defined, indicates that the nice routine is
*/
#define HAS_SELECT /**/
-/* HAS_SEM:
- * This symbol, if defined, indicates that the entire sem*(2) library is
- * supported.
- */
-#define HAS_SEM /**/
-
/* HAS_SETEGID:
* This symbol, if defined, indicates that the setegid routine is available
* to change the effective gid of the current program.
* for a POSIX interface.
*/
#define HAS_SETPGRP /**/
-/*#define USE_BSD_SETPGRP / **/
+#define USE_BSD_SETPGRP /**/
/* HAS_SETPGRP2:
* This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
* This symbol, if defined, indicates that the setrgid routine is available
* to change the real gid of the current program.
*/
-/*#define HAS_SETRGID / **/
+#define HAS_SETRGID /**/
/* HAS_SETRUID:
* This symbol, if defined, indicates that the setruid routine is available
* to change the real uid of the current program.
*/
-/*#define HAS_SETRUID / **/
+#define HAS_SETRUID /**/
/* HAS_SETSID:
* This symbol, if defined, indicates that the setsid routine is
*/
#define HAS_SETSID /**/
-/* HAS_SHM:
- * This symbol, if defined, indicates that the entire shm*(2) library is
- * supported.
- */
-#define HAS_SHM /**/
-
/* Shmat_t:
* This symbol holds the return type of the shmat() system call.
* Usually set to 'void *' or 'char *'.
#define Shmat_t void * /**/
#define HAS_SHMAT_PROTOTYPE /**/
-/* USE_STAT_BLOCKS:
- * This symbol is defined if this system has a stat structure declaring
- * st_blksize and st_blocks.
- */
-/*#define USE_STAT_BLOCKS / **/
-
/* HAS_STRCHR:
* This symbol is defined to indicate that the strchr()/strrchr()
* functions are available for string searching. If not, try the
*/
#define USE_STRUCT_COPY /**/
-/* HAS_STRERROR:
- * This symbol, if defined, indicates that the strerror routine is
- * available to translate error numbers to strings. See the writeup
- * of Strerror() in this file before you try to define your own.
- */
-/* HAS_SYS_ERRLIST:
- * This symbol, if defined, indicates that the sys_errlist array is
- * available to translate error numbers to strings. The extern int
- * sys_nerr gives the size of that table.
- */
-/* Strerror:
- * This preprocessor symbol is defined as a macro if strerror() is
- * not available to translate error numbers to strings but sys_errlist[]
- * array is there.
- */
-#define HAS_STRERROR /**/
-#define HAS_SYS_ERRLIST /**/
-#define Strerror(e) strerror(e)
-
/* HAS_STRTOD:
* This symbol, if defined, indicates that the strtod routine is
* available to provide better numeric string conversion than atof().
*/
#define HAS_WCTOMB /**/
+/* I_ARPA_INET:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <arpa/inet.h> to get inet_addr and friends declarations.
+ */
+#define I_ARPA_INET /**/
+
/* I_DBM:
* This symbol, if defined, indicates that <dbm.h> exists and should
* be included.
* portably declare your directory entries.
*/
#define I_DIRENT /**/
-/*#define DIRNAMLEN / **/
+#define DIRNAMLEN /**/
#define Direntry_t struct dirent
/* I_DLFCN:
*/
#define I_FLOAT /**/
-/* I_GRP:
- * This symbol, if defined, indicates to the C program that it should
- * include <grp.h>.
- */
-#define I_GRP /**/
-
/* I_LIMITS:
* This symbol, if defined, indicates to the C program that it should
* include <limits.h> to get definition of symbols like WORD_BIT or
* This symbol is defined to be the type of char used in stdio.h.
* It has the values "unsigned char" or "char".
*/
-#define STDCHAR char /**/
+#define STDCHAR unsigned char /**/
+
+/* HAS_ACCESSX:
+ * This symbol, if defined, indicates that the accessx routine is
+ * available to do extended access checks.
+ */
+/*#define HAS_ACCESSX / **/
+
+/* HAS_EACCESS:
+ * This symbol, if defined, indicates that the eaccess routine is
+ * available to do extended access checks.
+ */
+/*#define HAS_EACCESS / **/
+
+/* I_SYS_ACCESS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/access.h>.
+ */
+#define I_SYS_ACCESS /**/
+
+/* I_SYS_SECURITY:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/security.h>.
+ */
+#define I_SYS_SECURITY /**/
/* MEM_ALIGNBYTES:
* This symbol contains the number of bytes required to align a
* system, and used by a different architecture to build an extension.
* The default is eight, for safety.
*/
-#define MEM_ALIGNBYTES 4 /**/
+#define MEM_ALIGNBYTES 8 /**/
/* BYTEORDER:
* This symbol holds the hexadecimal constant defined in byteorder,
* This might matter for NeXT 3.0.
*/
#ifndef NeXT
-#define BYTEORDER 0x1234 /* large digits for MSB */
+#define BYTEORDER 0x12345678 /* large digits for MSB */
#else /* NeXT */
#ifdef __LITTLE_ENDIAN__
#define BYTEORDER 0x1234
*/
/*#define VOID_CLOSEDIR / **/
+/* HAS_FD_SET:
+ * This symbol, when defined, indicates presence of the fd_set typedef
+ * in <sys/types.h>
+ */
+#define HAS_FD_SET /**/
+
/* Gconvert:
* This preprocessor macro is defined to convert a floating point
* number to a string without a trailing decimal point. This
* This symbol, if defined, indicates to the C program that
* the GNU C library is being used.
*/
-#define HAS_GNULIBC /**/
+/*#define HAS_GNULIBC / **/
/* HAS_ISASCII:
* This manifest constant lets the C program know that isascii
* is available.
* available to operate on a symbolic link (instead of following the
* link).
*/
-/*#define HAS_LCHOWN / **/
+#define HAS_LCHOWN /**/
/* HAS_OPEN3:
* This manifest constant lets the C program know that the three
*/
#define HAS_SIGACTION /**/
+/* HAS_SIGSETJMP:
+ * This variable indicates to the C program that the sigsetjmp()
+ * routine is available to save the calling process's registers
+ * and stack environment for later use by siglongjmp(), and
+ * to optionally save the process's signal mask. See
+ * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+ */
/* Sigjmp_buf:
* This is the buffer type to be used with Sigsetjmp and Siglongjmp.
*/
*/
#define USE_STDIO_PTR /**/
#ifdef USE_STDIO_PTR
-#define FILE_ptr(fp) ((fp)->_IO_read_ptr)
+#define FILE_ptr(fp) ((fp)->_ptr)
#define STDIO_PTR_LVALUE /**/
-#define FILE_cnt(fp) ((fp)->_IO_read_end - (fp)->_IO_read_ptr)
-/*#define STDIO_CNT_LVALUE / **/
+#define FILE_cnt(fp) ((fp)->_cnt)
+#define STDIO_CNT_LVALUE /**/
#endif
/* USE_STDIO_BASE:
*/
#define USE_STDIO_BASE /**/
#ifdef USE_STDIO_BASE
-#define FILE_base(fp) ((fp)->_IO_read_base)
-#define FILE_bufsiz(fp) ((fp)->_IO_read_end - (fp)->_IO_read_base)
+#define FILE_base(fp) ((fp)->_base)
+#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
#endif
/* HAS_VPRINTF:
* preprocessor can make decisions based on it.
*/
#define INTSIZE 4 /**/
-#define LONGSIZE 4 /**/
+#define LONGSIZE 8 /**/
#define SHORTSIZE 2 /**/
/* VAL_O_NONBLOCK:
* the compiler supports (void *); otherwise it will be
* sizeof(char *).
*/
-#define PTRSIZE 4 /**/
+#define PTRSIZE 8 /**/
+/* Drand01:
+ * This macro is to be used to generate uniformly distributed
+ * random numbers over the range [0., 1.[. You may have to supply
+ * an 'extern double drand48();' in your program since SunOS 4.1.3
+ * doesn't provide you with anything relevant in it's headers.
+ * See HAS_DRAND48_PROTO.
+ */
+/* Rand_seed_t:
+ * This symbol defines the type of the argument of the
+ * random seed function.
+ */
+/* seedDrand01:
+ * This symbol defines the macro to be used in seeding the
+ * random number generator (see Drand01).
+ */
/* RANDBITS:
- * This symbol contains the number of bits of random number the rand()
- * function produces. Usual values are 15, 16, and 31.
+ * This symbol indicates how many bits are produced by the
+ * function used to generate normalized random numbers.
+ * Values include 15, 16, 31, and 48.
*/
-#define RANDBITS 31 /**/
+#define Drand01() drand48() /**/
+#define Rand_seed_t long /**/
+#define seedDrand01(x) srand48((Rand_seed_t)x) /**/
+#define RANDBITS 48 /**/
/* SSize_t:
* This symbol holds the type used by functions that return
*/
#define SSize_t ssize_t /* signed count of bytes */
+/* EBCDIC:
+ * This symbol, if defined, indicates that this system uses
+ * EBCDIC encoding.
+ */
+/*#define EBCDIC / **/
+
/* OSNAME:
* This symbol contains the name of the operating system, as determined
* by Configure. You shouldn't rely on it too much; the specific
* feature tests from Configure are generally more reliable.
*/
-#define OSNAME "linux" /**/
+#define OSNAME "dec_osf" /**/
/* CAT2:
* This macro catenates 2 tokens together.
#include "Bletch: How does this C preprocessor catenate tokens?"
#endif
+/* CPPSTDIN:
+ * This symbol contains the first part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. Typical value of "cc -E" or "/lib/cpp", but it can also
+ * call a wrapper. See CPPRUN.
+ */
+/* CPPMINUS:
+ * This symbol contains the second part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. This symbol will have the value "-" if CPPSTDIN needs a minus
+ * to specify standard input, otherwise the value is "".
+ */
+/* CPPRUN:
+ * This symbol contains the string which will invoke a C preprocessor on
+ * the standard input and produce to standard output. It needs to end
+ * with CPPLAST, after all other preprocessor flags have been specified.
+ * The main difference with CPPSTDIN is that this program will never be a
+ * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
+ * available directly to the user. Note that it may well be different from
+ * the preprocessor used to compile the C program.
+ */
+#define CPPSTDIN "cppstdin"
+#define CPPMINUS ""
+#define CPPRUN "/usr/bin/cpp"
+
+/* HAS_ACCESS:
+ * This manifest constant lets the C program know that the access()
+ * system call is available to check for accessibility using real UID/GID.
+ * (always present on UNIX.)
+ */
+#define HAS_ACCESS /**/
+
+/* HAS_CSH:
+ * This symbol, if defined, indicates that the C-shell exists.
+ */
/* CSH:
* This symbol, if defined, contains the full pathname of csh.
*/
#define HAS_CSH /**/
#ifdef HAS_CSH
-#define CSH "/bin/csh" /**/
+#define CSH "/usr/bin/csh" /**/
#endif
+/* HAS_ENDGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the group database.
+ */
+#define HAS_ENDGRENT /**/
+
/* HAS_ENDHOSTENT:
* This symbol, if defined, indicates that the endhostent() routine is
* available to close whatever was being used for host queries.
*/
#define HAS_ENDPROTOENT /**/
+/* HAS_ENDPWENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the passwd database.
+ */
+#define HAS_ENDPWENT /**/
+
/* HAS_ENDSERVENT:
* This symbol, if defined, indicates that the endservent() routine is
* available to close whatever was being used for service queries.
*/
#define HAS_ENDSERVENT /**/
+/* HAS_GETGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for sequential access of the group database.
+ */
+#define HAS_GETGRENT /**/
+
/* HAS_GETHOSTBYADDR:
* This symbol, if defined, indicates that the gethostbyaddr() routine is
* available to look up hosts by their IP addresses.
#define HAS_GETPROTOBYNAME /**/
#define HAS_GETPROTOBYNUMBER /**/
+/* HAS_GETPWENT:
+ * This symbol, if defined, indicates that the getpwent routine is
+ * available for sequential access of the passwd database.
+ * If this is not available, the older getpw() function may be available.
+ */
+#define HAS_GETPWENT /**/
+
/* HAS_GETSERVENT:
* This symbol, if defined, indicates that the getservent() routine is
* available to look up network services in some data base or another.
#define HAS_GETSERVBYNAME /**/
#define HAS_GETSERVBYPORT /**/
+/* HAS_HTONL:
+ * This symbol, if defined, indicates that the htonl() routine (and
+ * friends htons() ntohl() ntohs()) are available to do network
+ * order byte swapping.
+ */
+/* HAS_HTONS:
+ * This symbol, if defined, indicates that the htons() routine (and
+ * friends htonl() ntohl() ntohs()) are available to do network
+ * order byte swapping.
+ */
+/* HAS_NTOHL:
+ * This symbol, if defined, indicates that the ntohl() routine (and
+ * friends htonl() htons() ntohs()) are available to do network
+ * order byte swapping.
+ */
+/* HAS_NTOHS:
+ * This symbol, if defined, indicates that the ntohs() routine (and
+ * friends htonl() htons() ntohl()) are available to do network
+ * order byte swapping.
+ */
+#define HAS_HTONL /**/
+#define HAS_HTONS /**/
+#define HAS_NTOHL /**/
+#define HAS_NTOHS /**/
+
/* HAS_LONG_DOUBLE:
* This symbol will be defined if the C compiler supports long
* doubles.
*/
#define HAS_LONG_DOUBLE /**/
#ifdef HAS_LONG_DOUBLE
-#define LONG_DOUBLESIZE 12 /**/
+#define LONG_DOUBLESIZE 8 /**/
#endif
/* HAS_LONG_LONG:
- * This symbol will be defined if the C compiler supports
- * long long.
+ * This symbol will be defined if the C compiler supports long long.
*/
/* LONGLONGSIZE:
* This symbol contains the size of a long long, so that the
#define LONGLONGSIZE 8 /**/
#endif
+/* HAS_MMAP:
+ * This symbol, if defined, indicates that the mmap system call is
+ * available to map a file into memory.
+ */
+/* Mmap_t:
+ * This symbol holds the return type of the mmap() system call
+ * (and simultaneously the type of the first argument).
+ * Usually set to 'void *' or 'cadd_t'.
+ */
+#define HAS_MMAP /**/
+#define Mmap_t void * /**/
+
+/* HAS_MSG:
+ * This symbol, if defined, indicates that the entire msg*(2) library is
+ * supported (IPC mechanism based on message queues).
+ */
+#define HAS_MSG /**/
+
+/* HAS_SEM:
+ * This symbol, if defined, indicates that the entire sem*(2) library is
+ * supported.
+ */
+#define HAS_SEM /**/
+
+/* HAS_SETGRENT:
+ * This symbol, if defined, indicates that the setgrent routine is
+ * available for initializing sequential access of the group database.
+ */
+#define HAS_SETGRENT /**/
+
/* HAS_SETGROUPS:
* This symbol, if defined, indicates that the setgroups() routine is
* available to set the list of process groups. If unavailable, multiple
*/
#define HAS_SETPROTOENT /**/
+/* HAS_SETPWENT:
+ * This symbol, if defined, indicates that the setpwent routine is
+ * available for initializing sequential access of the passwd database.
+ */
+#define HAS_SETPWENT /**/
+
/* HAS_SETSERVENT:
* This symbol, if defined, indicates that the setservent() routine is
* available.
*/
#define HAS_SETVBUF /**/
+/* HAS_SHM:
+ * This symbol, if defined, indicates that the entire shm*(2) library is
+ * supported.
+ */
+#define HAS_SHM /**/
+
/* HAS_SOCKET:
* This symbol, if defined, indicates that the BSD socket interface is
* supported.
* This symbol, if defined, indicates that the BSD socketpair() call is
* supported.
*/
-#define HAS_SOCKET /**/
-#define HAS_SOCKETPAIR /**/
+/* HAS_MSG_CTRUNC:
+ * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_DONTROUTE:
+ * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_OOB:
+ * This symbol, if defined, indicates that the MSG_OOB is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_PEEK:
+ * This symbol, if defined, indicates that the MSG_PEEK is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_PROXY:
+ * This symbol, if defined, indicates that the MSG_PROXY is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_SCM_RIGHTS:
+ * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_SENDMSG:
+ * This symbol, if defined, indicates that the sendmsg is supported
+ * to send messages between sockets. You will also need struct
+ * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
+ */
+/* HAS_RECVMSG:
+ * This symbol, if defined, indicates that the recvmsg is supported
+ * to send messages between sockets. You will also need struct
+ * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
+ */
+/* HAS_STRUCT_MSGHDR:
+ * This symbol, if defined, indicates that the struct msghdr
+ * (BSD 4.3 or 4.4) is supported. You will also need struct
+ * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
+ */
+/* HAS_STRUCT_CMSGHDR:
+ * This symbol, if defined, indicates that the struct cmsghdr
+ * (BSD 4.4) is supported. You will also need struct
+ * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
+ */
+#define HAS_SOCKET /**/
+#define HAS_SOCKETPAIR /**/
+#define HAS_MSG_CTRUNC /**/
+#define HAS_MSG_DONTROUTE /**/
+#define HAS_MSG_OOB /**/
+#define HAS_MSG_PEEK /**/
+/*#define HAS_MSG_PROXY / **/
+#define HAS_SCM_RIGHTS /**/
+#define HAS_SENDMSG /**/
+#define HAS_RECVMSG /**/
+#define HAS_STRUCT_MSGHDR /**/
+#define HAS_STRUCT_CMSGHDR /**/
+
+/* USE_STAT_BLOCKS:
+ * This symbol is defined if this system has a stat structure declaring
+ * st_blksize and st_blocks.
+ */
+#define USE_STAT_BLOCKS /**/
+
+/* HAS_STRERROR:
+ * This symbol, if defined, indicates that the strerror routine is
+ * available to translate error numbers to strings. See the writeup
+ * of Strerror() in this file before you try to define your own.
+ */
+/* HAS_SYS_ERRLIST:
+ * This symbol, if defined, indicates that the sys_errlist array is
+ * available to translate error numbers to strings. The extern int
+ * sys_nerr gives the size of that table.
+ */
+/* Strerror:
+ * This preprocessor symbol is defined as a macro if strerror() is
+ * not available to translate error numbers to strings but sys_errlist[]
+ * array is there.
+ */
+#define HAS_STRERROR /**/
+#define HAS_SYS_ERRLIST /**/
+#define Strerror(e) strerror(e)
/* HAS_UNION_SEMUN:
* This symbol, if defined, indicates that the union semun is
* This symbol, if defined, indicates that struct semid_ds * is
* used for semctl IPC_STAT.
*/
-#define HAS_UNION_SEMUN /**/
+/*#define HAS_UNION_SEMUN / **/
#define USE_SEMCTL_SEMUN /**/
#define USE_SEMCTL_SEMID_DS /**/
#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
#endif
+/* I_GRP:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <grp.h>.
+ */
+/* GRPASSWD:
+ * This symbol, if defined, indicates to the C program that struct group
+ * in <grp.h> contains gr_passwd.
+ */
+#define I_GRP /**/
+#define GRPASSWD /**/
+
/* I_NETDB:
* This symbol, if defined, indicates that <netdb.h> exists and
* should be included.
* This symbol, if defined, indicates to the C program that struct passwd
* contains pw_gecos.
*/
+/* PWPASSWD:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_passwd.
+ */
#define I_PWD /**/
-/*#define PWQUOTA / **/
+#define PWQUOTA /**/
/*#define PWAGE / **/
/*#define PWCHANGE / **/
/*#define PWCLASS / **/
/*#define PWEXPIRE / **/
-/*#define PWCOMMENT / **/
+#define PWCOMMENT /**/
#define PWGECOS /**/
+#define PWPASSWD /**/
+
+/* I_SYSUIO:
+ * This symbol, if defined, indicates that <sys/uio.h> exists and
+ * should be included.
+ */
+#define I_SYSUIO /**/
/* Free_t:
* This variable contains the return type of free(). It is usually
* The last element is 0, corresponding to the 0 at the end of
* the sig_name list.
*/
-#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "TRAP", "ABRT", "BUS", "FPE", "KILL", "USR1", "SEGV", "USR2", "PIPE", "ALRM", "TERM", "STKFLT", "CHLD", "CONT", "STOP", "TSTP", "TTIN", "TTOU", "URG", "XCPU", "XFSZ", "VTALRM", "PROF", "WINCH", "IO", "PWR", "UNUSED", "IOT", "CLD", "POLL", 0 /**/
-#define SIG_NUM 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 6, 17, 29, 0 /**/
+#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "TRAP", "ABRT", "EMT", "FPE", "KILL", "BUS", "SEGV", "SYS", "PIPE", "ALRM", "TERM", "IOINT", "STOP", "TSTP", "CONT", "CHLD", "TTIN", "TTOU", "AIO", "XCPU", "XFSZ", "VTALRM", "PROF", "WINCH", "INFO", "USR1", "USR2", "RESV", "RTMIN", "NUM34", "NUM35", "NUM36", "NUM37", "NUM38", "NUM39", "NUM40", "NUM41", "NUM42", "NUM43", "NUM44", "NUM45", "NUM46", "NUM47", "MAX", "IOT", "LOST", "URG", "CLD", "IO", "POLL", "PTY", "PWR", "RTMAX", 0 /**/
+#define SIG_NUM 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 6, 6, 16, 20, 23, 23, 23, 29, 48, 0 /**/
/* VOIDFLAGS:
* This symbol indicates how much support of the void type is given by this
* This symbol contains the ~name expanded version of ARCHLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define ARCHLIB "/opt/perl/lib/5.00470/i686-linux-thread" /**/
-#define ARCHLIB_EXP "/opt/perl/lib/5.00470/i686-linux-thread" /**/
+#define ARCHLIB "/opt/perl/lib/5.00554/alpha-dec_osf-thread" /**/
+#define ARCHLIB_EXP "/opt/perl/lib/5.00554/alpha-dec_osf-thread" /**/
/* DLSYM_NEEDS_UNDERSCORE:
* This symbol, if defined, indicates that we need to prepend an
*/
/*#define DLSYM_NEEDS_UNDERSCORE / **/
+/* HAS_FSEEKO:
+ * This symbol, if defined, indicates that the fseeko routine is
+ * available to fseek beyond 32 bits (useful for ILP32 hosts).
+ */
+/*#define HAS_FSEEKO / **/
+
+/* HAS_FTELLO:
+ * This symbol, if defined, indicates that the ftello routine is
+ * available to ftell from beyond 32 bits (useful for ILP32 hosts).
+ */
+/*#define HAS_FTELLO / **/
+
+/* HAS_MADVISE:
+ * This symbol, if defined, indicates that the madvise system call is
+ * available to map a file into memory.
+ */
+#define HAS_MADVISE /**/
+
+/* HAS_MPROTECT:
+ * This symbol, if defined, indicates that the mprotect system call is
+ * available to modify the access protection of a memory mapped file.
+ */
+#define HAS_MPROTECT /**/
+
+/* HAS_READV:
+ * This symbol, if defined, indicates that the readv routine is
+ * available to do gather reads. You will also need <sys/uio.h>
+ * and there I_SYSUIO.
+ */
+#define HAS_READV /**/
+
/* USE_SFIO:
* This symbol, if defined, indicates that sfio should
* be used.
*/
/*#define USE_SFIO / **/
+/* HAS_FSTATFS:
+ * This symbol, if defined, indicates that the fstatfs routine is
+ * available to do stat filesystems of file descriptors.
+ */
+/* HAS_STRUCT_STATFS_FLAGS:
+ * This symbol, if defined, indicates that the struct statfs
+ * does have the f_flags member containing the mount flags of
+ * the filesystem holding the file.
+ * This kind of struct statfs is coming from sys/mount.h (BSD)
+ * and not from sys/statfs.h (SYSV).
+ */
+#define HAS_FSTATFS /**/
+#define HAS_STRUCT_STATFS_FLAGS /**/
+
+/* HAS_FSTATVFS:
+ * This symbol, if defined, indicates that the fstatvfs routine is
+ * available to do stat filesystems of file descriptors.
+ */
+#define HAS_FSTATVFS /**/
+
+/* HAS_TELLDIR_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the telldir() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern long telldir _((DIR*));
+ */
+#define HAS_TELLDIR_PROTO /**/
+
+/* HAS_WRITEV:
+ * This symbol, if defined, indicates that the writev routine is
+ * available to do scatter writes.
+ */
+#define HAS_WRITEV /**/
+
+/* HAS_DBMINIT64:
+ * This symbol, if defined, indicates that the dbminit64 routine is
+ * available to open dbm files larger than 2 gigabytes.
+ */
+/* HAS_DBMCLOSE64:
+ * This symbol, if defined, indicates that the dbmclose64 routine is
+ * available to close dbm files larger than 2 gigabytes.
+ */
+/* HAS_FETCH64:
+ * This symbol, if defined, indicates that the fetch64 routine is
+ * available to fetch from dbm files larger than 2 gigabytes.
+ */
+/* HAS_STORE64:
+ * This symbol, if defined, indicates that the store64 routine is
+ * available to store to dbm files larger than 2 gigabytes.
+ */
+/* HAS_DELETE64:
+ * This symbol, if defined, indicates that the delete64 routine is
+ * available to delete from dbm files larger than 2 gigabytes.
+ */
+/* HAS_FIRSTKEY64:
+ * This symbol, if defined, indicates that the firstkey64 routine is
+ * available to firstkey in dbm files larger than 2 gigabytes.
+ */
+/* HAS_NEXTKEY64:
+ * This symbol, if defined, indicates that the nextkey64 routine is
+ * available to nextkey in dbm files larger than 2 gigabytes.
+ */
+/*#define HAS_DBMINIT64 / **/
+/*#define HAS_DBMCLOSE64 / **/
+/*#define HAS_FETCH64 / **/
+/*#define HAS_STORE64 / **/
+/*#define HAS_DELETE64 / **/
+/*#define HAS_FIRSTKEY64 / **/
+/*#define HAS_NEXTKEY64 / **/
+
/* USE_DYNAMIC_LOADING:
* This symbol, if defined, indicates that dynamic loading of
* some sort is available.
#define DB_Hash_t u_int32_t /**/
#define DB_Prefix_t size_t /**/
+/* I_INTTYPES:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <inttypes.h>.
+ */
+/* HAS_INT64_T:
+ * This symbol will defined if the C compiler supports int64_t.
+ * Usually the <inttypes.h> needs to be included, but sometimes
+ * <sys/types.h> is enough.
+ */
+/*#define I_INTTYPES / **/
+/*#define HAS_INT64_T / **/
+
+/* I_MNTENT:
+ * This symbol, if defined, indicates that <mntent.h> exists and
+ * should be included.
+ */
+/*#define I_MNTENT / **/
+
+/* I_POLL:
+ * This symbol, if defined, indicates that <poll.h> exists and
+ * should be included.
+ */
+#define I_POLL /**/
+
+/* I_SYS_MMAN:
+ * This symbol, if defined, indicates that <sys/mman.h> exists and
+ * should be included.
+ */
+#define I_SYS_MMAN /**/
+
+/* I_SYS_MOUNT:
+ * This symbol, if defined, indicates that <sys/mount.h> exists and
+ * should be included.
+ */
+#define I_SYS_MOUNT /**/
+
+/* I_SYS_STATVFS:
+ * This symbol, if defined, indicates that <sys/statvfs.h> exists and
+ * should be included.
+ */
+#define I_SYS_STATVFS /**/
+
+/* INSTALL_USR_BIN_PERL:
+ * This symbol, if defined, indicates that Perl is to be installed
+ * also as /usr/bin/perl.
+ */
+#define INSTALL_USR_BIN_PERL /**/
+
+/* HAS_FSTAT64:
+ * This symbol, if defined, indicates that the fstat64 routine is
+ * available to stat files (fds) larger than 2 gigabytes.
+ */
+/* HAS_FTRUNCATE64:
+ * This symbol, if defined, indicates that the ftruncate64 routine is
+ * available to tell files larger than 2 gigabytes.
+ */
+/* HAS_LSEEK64:
+ * This symbol, if defined, indicates that the lseek64 routine is
+ * available to seek files larger than 2 gigabytes.
+ */
+/* HAS_LSTAT64:
+ * This symbol, if defined, indicates that the lstat64 routine is
+ * available to stat files (symlinks) larger than 2 gigabytes.
+ */
+/* HAS_OPEN64:
+ * This symbol, if defined, indicates that the open64 routine is
+ * available to open files larger than 2 gigabytes.
+ */
+/* HAS_OPENDIR64:
+ * This symbol, if defined, indicates that the opendir64 routine is
+ * available to opendir files larger than 2 gigabytes.
+ */
+/* HAS_READDIR64:
+ * This symbol, if defined, indicates that the readdir64 routine is
+ * available to readdir files larger than 2 gigabytes.
+ */
+/* HAS_SEEKDIR64:
+ * This symbol, if defined, indicates that the seekdir64 routine is
+ * available to seekdir files larger than 2 gigabytes.
+ */
+/* HAS_STAT64:
+ * This symbol, if defined, indicates that the stat64 routine is
+ * available to stat files larger than 2 gigabytes.
+ */
+/* HAS_TELLDIR64:
+ * This symbol, if defined, indicates that the telldir64 routine is
+ * available to telldir files larger than 2 gigabytes.
+ */
+/* HAS_TRUNCATE64:
+ * This symbol, if defined, indicates that the truncate64 routine is
+ * available to truncate files larger than 2 gigabytes.
+ */
+/* HAS_OFF64_T:
+ * This symbol will be defined if the C compiler supports off64_t.
+ */
+/* HAS_STRUCT_DIRENT64:
+ * This symbol will be defined if the C compiler supports struct dirent64.
+ */
+/*#define HAS_FSTAT64 / **/
+/*#define HAS_FTRUNCATE64 / **/
+/*#define HAS_LSEEK64 / **/
+/*#define HAS_LSTAT64 / **/
+/*#define HAS_OPEN64 / **/
+/*#define HAS_OPENDIR64 / **/
+/*#define HAS_READDIR64 / **/
+/*#define HAS_SEEKDIR64 / **/
+/*#define HAS_STAT64 / **/
+/*#define HAS_TELLDIR64 / **/
+/*#define HAS_TRUNCATE64 / **/
+/*#define HAS_OFF64_T / **/
+/*#define HAS_STRUCT_DIRENT64 / **/
+
/* PRIVLIB:
* This symbol contains the name of the private library for this package.
* The library is private in the sense that it needn't be in anyone's
* This symbol contains the ~name expanded version of PRIVLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define PRIVLIB "/opt/perl/lib/5.00470" /**/
-#define PRIVLIB_EXP "/opt/perl/lib/5.00470" /**/
+#define PRIVLIB "/opt/perl/lib/5.00554" /**/
+#define PRIVLIB_EXP "/opt/perl/lib/5.00554" /**/
+
+/* SELECT_MIN_BITS:
+ * This symbol holds the minimum number of bits operated by select.
+ * That is, if you do select(n, ...), how many bits at least will be
+ * cleared in the masks if some activity is detected. Usually this
+ * is either n or 32*ceil(n/32), especially many little-endians do
+ * the latter. This is only useful if you have select(), naturally.
+ */
+#define SELECT_MIN_BITS 32 /**/
/* SITEARCH:
* This symbol contains the name of the private library for this package.
* This symbol contains the ~name expanded version of SITEARCH, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define SITEARCH "/opt/perl/lib/site_perl/5.00470/i686-linux-thread" /**/
-#define SITEARCH_EXP "/opt/perl/lib/site_perl/5.00470/i686-linux-thread" /**/
+#define SITEARCH "/opt/perl/lib/site_perl/5.00554/alpha-dec_osf-thread" /**/
+#define SITEARCH_EXP "/opt/perl/lib/site_perl/5.00554/alpha-dec_osf-thread" /**/
/* SITELIB:
* This symbol contains the name of the private library for this package.
* This symbol contains the ~name expanded version of SITELIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define SITELIB "/opt/perl/lib/site_perl/5.00470" /**/
-#define SITELIB_EXP "/opt/perl/lib/site_perl/5.00470" /**/
+#define SITELIB "/opt/perl/lib/site_perl/5.00554" /**/
+#define SITELIB_EXP "/opt/perl/lib/site_perl/5.00554" /**/
/* STARTPERL:
* This variable contains the string to put in front of a perl
*/
#define STARTPERL "#!/opt/perl/bin/perl" /**/
+/* HAS_FGETPOS64:
+ * This symbol, if defined, indicates that the fgetpos64 routine is
+ * available to getpos files larger than 2 gigabytes.
+ */
+/* HAS_FOPEN64:
+ * This symbol, if defined, indicates that the fopen64 routine is
+ * available to open files larger than 2 gigabytes.
+ */
+/* HAS_FREOPEN64:
+ * This symbol, if defined, indicates that the freopen64 routine is
+ * available to reopen files larger than 2 gigabytes.
+ */
+/* HAS_FSEEK64:
+ * This symbol, if defined, indicates that the fseek64 routine is
+ * available to seek files larger than 2 gigabytes.
+ */
+/* HAS_FSEEKO64:
+ * This symbol, if defined, indicates that the fseeko64 routine is
+ * available to seek files larger than 2 gigabytes.
+ */
+/* HAS_FSETPOS64:
+ * This symbol, if defined, indicates that the fsetpos64 routine is
+ * available to setpos files larger than 2 gigabytes.
+ */
+/* HAS_FTELL64:
+ * This symbol, if defined, indicates that the ftell64 routine is
+ * available to tell files larger than 2 gigabytes.
+ */
+/* HAS_FTELLO64:
+ * This symbol, if defined, indicates that the ftello64 routine is
+ * available to tell files larger than 2 gigabytes.
+ */
+/* HAS_TMPFILE64:
+ * This symbol, if defined, indicates that the tmpfile64 routine is
+ * available to tmpfile files larger than 2 gigabytes.
+ */
+/*#define HAS_FGETPOS64 / **/
+/*#define HAS_FOPEN64 / **/
+/*#define HAS_FREOPEN64 / **/
+/*#define HAS_FSEEK64 / **/
+/*#define HAS_FSEEKO64 / **/
+/*#define HAS_FSETPOS64 / **/
+/*#define HAS_FTELL64 / **/
+/*#define HAS_FTELLO64 / **/
+/*#define HAS_TMPFILE64 / **/
+
+/* USE_64_BITS:
+ * This symbol, if defined, indicates that 64-bit interfaces should
+ * be used when available. If not defined, the native default interfaces
+ * will be used (be they 32 or 64 bits).
+ */
+#define USE_64_BITS /**/
+
+/* MULTIPLICITY:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use multiplicity.
+ */
+/*#define MULTIPLICITY / **/
+
/* USE_PERLIO:
* This symbol, if defined, indicates that the PerlIO abstraction should
* be used throughout. If not defined, stdio should be
*/
/*#define USE_PERLIO / **/
+/* HAS_DRAND48_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the drand48() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern double drand48 _((void));
+ */
+#define HAS_DRAND48_PROTO /**/
+
/* HAS_GETHOST_PROTOS:
* This symbol, if defined, indicates that <netdb.h> includes
* prototypes for gethostent(), gethostbyname(), and
#define Netdb_host_t const char * /**/
#define Netdb_hlen_t int /**/
#define Netdb_name_t const char * /**/
-#define Netdb_net_t unsigned long /**/
+#define Netdb_net_t int /**/
/* Select_fd_set_t:
* This symbol holds the type used for the 2nd, 3rd, and 4th
* where library files may be held under a private library, for
* instance.
*/
-#define ARCHNAME "i686-linux-thread" /**/
+#define ARCHNAME "alpha-dec_osf-thread" /**/
+
+/* OLD_PTHREAD_CREATE_JOINABLE:
+ * This symbol, if defined, indicates how to create pthread
+ * in joinable (aka undetached) state. NOTE: not defined
+ * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
+ * (the new version of the constant).
+ * If defined, known values are PTHREAD_CREATE_UNDETACHED
+ * and __UNDETACHED.
+ */
+/*#define OLD_PTHREAD_CREATE_JOINABLE / **/
/* HAS_PTHREAD_YIELD:
* This symbol, if defined, indicates that the pthread_yield
* routine is available to yield the execution of the current
- * thread.
+ * thread. sched_yield is preferable to pthread_yield.
+ */
+/* SCHED_YIELD:
+ * This symbol defines the way to yield the execution of
+ * the current thread. Known ways are sched_yield,
+ * pthread_yield, and pthread_yield with NULL.
*/
/* HAS_SCHED_YIELD:
* This symbol, if defined, indicates that the sched_yield
* routine is available to yield the execution of the current
- * thread.
+ * thread. sched_yield is preferable to pthread_yield.
*/
/*#define HAS_PTHREAD_YIELD / **/
+#define SCHED_YIELD sched_yield() /**/
#define HAS_SCHED_YIELD /**/
-/* PTHREADS_CREATED_JOINABLE:
- * This symbol, if defined, indicates that pthreads are created
- * in the joinable (aka undetached) state.
+/* I_MACH_CTHREADS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <mach/cthreads.h>.
*/
-#define PTHREADS_CREATED_JOINABLE /**/
+/*#define I_MACH_CTHREADS / **/
/* USE_THREADS:
* This symbol, if defined, indicates that Perl should
* It can be int, long, off_t, etc... It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
+/* LSEEKSIZE:
+ * This symbol holds the number of bytes used by the Off_t.
+ */
#define Off_t off_t /* <offset> type */
+#define LSEEKSIZE 8 /* <offset> size */
/* Mode_t:
* This symbol holds the type used to declare file modes