esac
pldlflags="$cccdlflags"
- static_target='static_pic'
+ static_ldflags=''
case "${osname}${osvers}" in
next4*)
ld=libtool
;;
*) pldlflags=''
- static_target='static'
+ static_ldflags='CCCDLFLAGS='
;;
esac
nonxs_list=' '
for f in $nonxs_ext; do
- base=`echo "$f" | sed 's/.*\///'`
- nonxs_list="$nonxs_list ext/$f/pm_to_blib"
+ p=`echo "$f" | tr / -`
+ nonxs_list="$nonxs_list ext/$p/pm_to_blib"
done
dtrace_h=''
# if building a shared libperl.so that might later be linked into
# another application, then it might be appropriate to also build static
# extensions (usually just DynaLoader) with relocatable code (e.g. -fPIC
-# for GNU cc). This is handled by ext/util/make_ext.pl.
-STATIC = $static_target
+# for GNU cc).
+STATIC_LDFLAGS = $static_ldflags
# The following is used to include the current directory in
# the dynamic loader path you are building a shared libperl.
CCCMDSRC = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $<`
-# we dont include lib/Config_git.pl here, as it causes circular dependencies
-CONFIGPM = lib/Config.pm lib/Config_heavy.pl
-# so we add it here:
-CONFIGPM_EXTRA = $(CONFIGPM) lib/Config_git.pl
+CONFIGPM_FROM_CONFIG_SH = lib/Config.pm lib/Config_heavy.pl
+CONFIGPM = $(CONFIGPM_FROM_CONFIG_SH) lib/Config_git.pl
CONFIGPOD = lib/Config.pod
## In the following dollars and backticks do not need the extra backslash.
$spitshell >>$Makefile <<'!NO!SUBS!'
-private = preplibrary $(CONFIGPM) $(CONFIGPOD) lib/ExtUtils/Miniperl.pm
+private = preplibrary $(CONFIGPM) $(CONFIGPOD) lib/ExtUtils/Miniperl.pm git_version.h
# Files to be built with variable substitution before miniperl
# is available.
c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c
c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c
-c3 = taint.c toke.c util.c deb.c run.c universal.c xsutils.c pad.c globals.c
+c3 = taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c
c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c
c5 = $(madlysrc) $(mallocsrc)
obj0 = op$(OBJ_EXT) perl$(OBJ_EXT)
obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
-obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)
+obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)
mini_obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
ndt_obj = $(obj0) $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
obj = $(ndt_obj) $(DTRACE_O)
+perltoc_pod_prereqs = extra.pods pod/perlapi.pod pod/perldelta.pod pod/perlintern.pod
+generated_pods = pod/perltoc.pod $(perltoc_pod_prereqs)
+
lintflags = \
-b \
-n \
.c.s:
$(CCCMDSRC) -S $*.c
-all: $(FIRSTMAKEFILE) miniperl$(EXE_EXT) miniperl extra.pods $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
+all: $(FIRSTMAKEFILE) miniperl$(EXE_EXT) miniperl $(generated_pods) $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
@echo " ";
@echo " Everything is up to date. Type '$(MAKE) test' to run test suite."
.PHONY: all translators utilities
-git_version.h: miniperl$(EXE_EXT) make_patchnum.pl
+lib/Config_git.pl git_version.h: miniperl$(EXE_EXT) make_patchnum.pl
$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_patchnum.pl
# make sure that we recompile perl.c if the git version changes
.PHONY: makeppport
makeppport: miniperl\$(EXE_EXT) \$(CONFIGPM)
-@for f in Makefile.PL PPPort_pm.PL PPPort_xs.PL ppport_h.PL; do \
- (cd ext/Devel/PPPort && `pwd`/run.sh ../../../miniperl$(EXE_EXT) -I../../../lib \$\$f); \
+ (cd ext/Devel-PPPort && `pwd`/run.sh ../../miniperl$(EXE_EXT) -I../../lib \$\$f); \
done
!GROK!THIS!
$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib -MAutoSplit -MFile::Find -e 'find ({no_chdir=>1, wanted => sub {autosplit_lib_modules($$_) if /\.pm$$/}}, "lib")'
$(MAKE) lib/re.pm
-$(CONFIGPOD): config.sh miniperl$(EXE_EXT) configpm Porting/Glossary
+$(CONFIGPM_FROM_CONFIG_SH) $(CONFIGPOD): config.sh miniperl$(EXE_EXT) configpm Porting/Glossary lib/Config_git.pl
$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib configpm
-$(CONFIGPM): $(CONFIGPOD)
-
lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl$(EXE_EXT) minimod.pl $(CONFIGPM)
$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) minimod.pl > lib/ExtUtils/Miniperl.pm
cd lib/unicore && $(LDLIBPTH) $(RUN) ../../miniperl$(EXE_EXT) -I../../lib mktables -w
touch uni.data
+# perl$(EXE_EXT) and ext because buildtoc uses Text::Wrap uses re
+# But also this ensures that all extensions are built before we try to scan
+# them, which picks up Devel::PPPort's documentation.
+pod/perltoc.pod: $(perltoc_pod_prereqs) perl$(EXE_EXT) $(ext) pod/buildtoc
+ $(LDLIBPTH) $(RUN) ./perl$(EXE_EXT) -Ilib pod/buildtoc --build-toc -q
+
+pod/perlapi.pod pod/perlintern.pod: miniperl$(EXE_EXT) autodoc.pl embed.fnc
+ $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib autodoc.pl
+
+pod/perldelta.pod: pod/perl5110delta.pod
+ $(LNS) perl5110delta.pod pod/perldelta.pod
+
extra.pods: miniperl$(EXE_EXT)
-@test ! -f extra.pods || rm -f `cat extra.pods`
-@rm -f extra.pods
-@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \
nx=`echo $$x | sed -e "s/README\.//"`; \
- cd pod ; $(LNS) ../$$x "perl"$$nx".pod" ; cd .. ; \
+ $(LNS) ../$$x "pod/perl"$$nx".pod" ; \
echo "pod/perl"$$nx".pod" >> extra.pods ; \
done
- -@rm -f pod/perlvms.pod
- -@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods
- -@rm -f pod/perldelta.pod
- -@test -f pod/perl5110delta.pod && cd pod && $(LNS) perl5110delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc
extras.make: perl$(EXE_EXT)
-@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) $(RUN) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
# DynaLoader may be needed for extensions that use Makefile.PL.
$(DYNALOADER): miniperl$(EXE_EXT) preplibrary FORCE
- $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib ext/util/make_ext.pl $(STATIC) $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+ $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
d_dummy $(dynamic_ext): miniperl$(EXE_EXT) preplibrary makeppport $(DYNALOADER) FORCE
- $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib ext/util/make_ext.pl dynamic $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+ $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic
s_dummy $(static_ext): miniperl$(EXE_EXT) preplibrary makeppport $(DYNALOADER) FORCE
- $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib ext/util/make_ext.pl $(STATIC) $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+ $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
n_dummy $(nonxs_ext): miniperl$(EXE_EXT) preplibrary FORCE
- $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib ext/util/make_ext.pl nonxs $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+ $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
!NO!SUBS!
$spitshell >>$Makefile <<EOF
-rmdir .depending
-@test -f extra.pods && rm -f `cat extra.pods`
-@test -f vms/README_vms.pod && rm -f vms/README_vms.pod
- -rm -f perl.exp ext.libs extra.pods uni.data opmini.o perlmini.o
+ -rm -f perl.exp ext.libs $(generated_pods) uni.data opmini.o perlmini.o
-rm -f perl.export perl.dll perl.libexp perl.map perl.def
-rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap
-rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
-cd x2p; $(LDLIBPTH) $(MAKE) clean
-rm -f lib/Config_git.pl git_version.h
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
- $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib ext/util/make_ext.pl clean $$x MAKE=$(MAKE) ; \
+ $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --target=clean $$x MAKE=$(MAKE) ; \
done
_cleaner1:
-cd x2p; $(LDLIBPTH) $(MAKE) $(CLEAN)
-@if test -f miniperl$(EXE_EXT) ; then \
for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
- $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib ext/util/make_ext.pl $(CLEAN) $$x MAKE=$(MAKE) ; \
+ $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --target=$(CLEAN) $$x MAKE=$(MAKE) ; \
done ; \
else \
sh $(CLEAN).sh ; \
projects / p5sagit/p5-mst-13.2.git / blobdiff