+#! /bin/sh
case $CONFIG in
'')
if test -f config.sh; then TOP=.;
*) suidperl='';;
esac
-shrpdir=$archlibexp/CORE
-
+linklibperl='$(LIBPERL)'
+shrpldflags='$(LDDLFLAGS)'
case "$useshrplib" in
true)
- pldlflags="$cccdlflags"
- case "$osname" in
- os2) shrpenv='' ;;
- *) shrpenv="env LD_RUN_PATH=$shrpdir";;
- esac
+ pldlflags="$cccdlflags"
+ # NeXT-4 specific stuff. Can't we do this in the hint file?
case "${osname}${osvers}" in
next4*)
- # Can't we do this in the hint file?
- ld='libtool -dynamic -undefined warning -framework System \
- -compatibility_version 1 -current_version $(PATCHLEVEL) \
- -prebind -seg1addr 0x27000000 -install_name $(SHRPDIR)/$@'
+ ld=libtool
+ lddlflags="-dynamic -undefined warning -framework System \
+ -compatibility_version 1 -current_version $patchlevel \
+ -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@"
+ ;;
+ sunos*|freebsd[23]*|netbsd*)
+ linklibperl="-lperl"
+ ;;
+ aix*)
+ shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp"
+ shrpldflags="$shrpldflags -b noentry $ldflags $libs $cryptlib"
+ aixinstdir=`pwd | sed 's/\/UU$//'`
+ linklibperl="-L $archlibexp/CORE -L $aixinstdir -lperl"
;;
esac
- ;;
-*)
- pldlflags=''
- shrpenv=''
+ ;;
+*) pldlflags=''
;;
esac
# The following are used to build and install shared libraries for
# dynamic loading.
LDDLFLAGS = $lddlflags
+SHRPLDFLAGS = $shrpldflags
CCDLFLAGS = $ccdlflags
DLSUFFIX = .$dlext
PLDLFLAGS = $pldlflags
LIBPERL = $libperl
+LLIBPERL= $linklibperl
SHRPENV = $shrpenv
dynamic_ext = $dynamic_list
FORCE:
@sh -c true
-# The $& notation tells Sequent machines that it can do a parallel make,
-# and is harmless otherwise.
-# The miniperl -w -MExporter line is a basic cheap test to catch errors
-# before make goes on to run preplibrary and then MakeMaker on extensions.
-# This is very handy because later errors are often caused by miniperl
-# build problems but that's not obvious to the novice.
-# The Module used here must not depend on Config or any extensions.
-
-miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL)
- $(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) $(LIBPERL) $(libs)
- @./miniperl -w -Ilib -MExporter -e 0 || $(MAKE) minitest
-
miniperlmain$(OBJ_EXT): miniperlmain.c
$(CCCMD) $(PLDLFLAGS) $*.c
ext.libs: $(static_ext)
-@test -f ext.libs || touch ext.libs
-perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
- $(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LIBPERL) `cat ext.libs` $(libs)
-
-pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
- purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LIBPERL) `cat ext.libs` $(libs)
-
-quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
- quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LIBPERL) `cat ext.libs` $(libs)
-
!NO!SUBS!
+
# How to build libperl. This is still rather convoluted.
-# Load up custom Makefile.SH fragments?
+# Load up custom Makefile.SH fragment for shared loading and executables:
if test -r $osname/Makefile.SHs ; then
. $osname/Makefile.SHs
$spitshell >>Makefile <<!GROK!THIS!
Makefile: $osname/Makefile.SHs
!GROK!THIS!
else
- $spitshell >>Makefile <<!NO!SUBS!
+ $spitshell >>Makefile <<'!NO!SUBS!'
$(LIBPERL): $& perl$(OBJ_EXT) $(obj)
!NO!SUBS!
case "$useshrplib" in
true)
$spitshell >>Makefile <<'!NO!SUBS!'
- $(LD) $(LDDLFLAGS) -o $@ perl$(OBJ_EXT) $(obj)
+ $(LD) $(SHRPLDFLAGS) -o $@ perl$(OBJ_EXT) $(obj)
!NO!SUBS!
+ case "$osname" in
+ aix)
+ $spitshell >>Makefile <<'!NO!SUBS!'
+ mv $@ libperl$(OBJ_EXT)
+ $(AR) qv $(LIBPERL) libperl$(OBJ_EXT)
+!NO!SUBS!
+ ;;
+ esac
;;
*)
$spitshell >>Makefile <<'!NO!SUBS!'
!NO!SUBS!
;;
esac
-fi
-
-$spitshell >>Makefile <<'!NO!SUBS!'
+ $spitshell >>Makefile <<'!NO!SUBS!'
+
+# How to build executables.
+
+# The $& notation tells Sequent machines that it can do a parallel make,
+# and is harmless otherwise.
+# The miniperl -w -MExporter line is a basic cheap test to catch errors
+# before make goes on to run preplibrary and then MakeMaker on extensions.
+# This is very handy because later errors are often caused by miniperl
+# build problems but that's not obvious to the novice.
+# The Module used here must not depend on Config or any extensions.
+
+miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL)
+ $(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) $(LLIBPERL) $(libs)
+ @./miniperl -w -Ilib -MExporter -e 0 || $(MAKE) minitest
+
+perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ $(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+
+pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+
+purecovperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ purecov $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o purecovperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+
+quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
# This version, if specified in Configure, does ONLY those scripts which need
# set-id emulation. Suidperl must be setuid root. It contains the "taint"
# has been invoked correctly.
suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
- $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
+ $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+
+!NO!SUBS!
+
+fi
+
+$spitshell >>Makefile <<'!NO!SUBS!'
sperl$(OBJ_EXT): perl.c perly.h patchlevel.h $(h)
$(RMS) sperl.c
# normally shouldn't remake perly.[ch].
run_byacc: FORCE
- @ echo 'Expect' 130 shift/reduce and 1 reduce/reduce conflict
+ @ echo 'Expect' 113 shift/reduce and 1 reduce/reduce conflict
$(BYACC) -d perly.y
sh $(shellflags) ./perly.fixer y.tab.c perly.c
- sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' perly.c >perly.tmp && mv perly.tmp perly.c
- mv y.tab.h perly.h
- echo 'extern YYSTYPE yylval;' >>perly.h
+ sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
+ -e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
+ echo 'extern YYSTYPE yylval;' >>y.tab.h
+ cmp -s y.tab.h perly.h && rm -f y.tab.h || mv y.tab.h perly.h
- perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
# We don't want to regenerate perly.c and perly.h, but they might
s_dummy $(static_ext): miniperl preplibrary $(DYNALOADER) FORCE
@sh ext/util/make_ext static $@ LIBPERL_A=$(LIBPERL)
-clean:
+clean: _tidy _mopup
+
+realclean: _cleaner _mopup
+ @echo "Note that make realclean does not delete config.sh"
+
+clobber: _cleaner _mopup
+ rm -f config.sh cppstdin
+
+distclean: clobber
+
+# Do not 'make _mopup' directly.
+_mopup:
rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c
rm -f perl.exp ext.libs
-rm -f perl.export perl.dll perl.libexp perl.map perl.def
+ rm -f perl suidperl miniperl $(LIBPERL)
+
+# Do not 'make _tidy' directly.
+_tidy:
-cd pod; $(MAKE) clean
-cd utils; $(MAKE) clean
-cd x2p; $(MAKE) clean
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
sh ext/util/make_ext clean $$x ; \
done
- rm -f perl suidperl miniperl $(LIBPERL)
-realclean: clean
+# Do not 'make _cleaner' directly.
+_cleaner:
-cd os2; rm -f Makefile
-cd pod; $(MAKE) realclean
-cd utils; $(MAKE) realclean
rm -f lib/.exists
rm -f h2ph.man pstruct
rm -rf .config
- @echo "Note that make realclean does not delete config.sh"
-
-clobber: realclean
- rm -f config.sh cppstdin
-
-distclean: clobber
# The following lint has practically everything turned on. Unfortunately,
# you have to wade through a lot of mumbo jumbo that can't be suppressed.
$(FIRSTMAKEFILE): Makefile $(MAKEDEPEND)
$(MAKE) depend MAKEDEPEND=
-config.h: config.sh
+config.h: config_h.SH config.sh
$(SHELL) config_h.SH
perl.exp: perl_exp.SH config.sh
# Can't depend on lib/Config.pm because that might be where miniperl
# is crashing.
-minitest: miniperl
+minitest: miniperl
@echo "You may see some irrelevant test failures if you have been unable"
@echo "to build lib/Config.pm."
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
- && ./perl TEST base/*.t comp/*.t cmd/*.t io/*.t op/*.t </dev/tty
+ && ./perl TEST base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t </dev/tty
clist: $(c)
echo $(c) | tr ' ' '\012' >.clist
pllist: $(pl)
echo $(pl) | tr ' ' '\012' >.pllist
-Makefile: Makefile.SH ./config.sh
+Makefile: Makefile.SH ./config.sh
$(SHELL) Makefile.SH
-distcheck : FORCE
+distcheck: FORCE
perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()'
-manifest :
- perl '-MExtUtils::Manifest=&mkmanifest' -e 'mkmanifest()'
-
# AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
# If this runs make out of memory, delete /usr/include lines.
!NO!SUBS!
projects / p5sagit/p5-mst-13.2.git / blobdiff