+#! /bin/sh
case $CONFIG in
'')
- if test ! -f config.sh; then
- ln ../config.sh . || \
- ln ../../config.sh . || \
- ln ../../../config.sh . || \
- (echo "Can't find config.sh."; exit 1)
- fi
- . config.sh
- ;;
+ if test -f config.sh; then TOP=.;
+ elif test -f ../config.sh; then TOP=..;
+ elif test -f ../../config.sh; then TOP=../..;
+ elif test -f ../../../config.sh; then TOP=../../..;
+ elif test -f ../../../../config.sh; then TOP=../../../..;
+ else
+ echo "Can't find config.sh."; exit 1
+ fi
+ . $TOP/config.sh
+ ;;
esac
+: This forces SH files to create target in same directory as SH file.
+: This is so that make depend always knows where to find SH derivatives.
case "$0" in
*/*) cd `expr X$0 : 'X\(.*\)/'` ;;
esac
-case "$d_symlink" in
-*define*) sln='ln -s' ;;
-*) sln='ln';;
+case "$d_dosuid" in
+*define*) suidperl='suidperl' ;;
+*) suidperl='';;
+esac
+
+linklibperl='$(LIBPERL)'
+shrpldflags='$(LDDLFLAGS)'
+case "$useshrplib" in
+true)
+ pldlflags="$cccdlflags"
+ # NeXT-4 specific stuff. Can't we do this in the hint file?
+ case "${osname}${osvers}" in
+ next4*)
+ ld=libtool
+ lddlflags="-dynamic -undefined warning -framework System \
+ -compatibility_version 1 -current_version $patchlevel \
+ -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@"
+ ;;
+ sunos*|freebsd[23]*|netbsd*)
+ linklibperl="-lperl"
+ ;;
+ aix*)
+ shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp"
+ case "$osvers" in
+ 3*)
+ shrpldflags="$shrpldflags -e _nostart $ldflags $libs $cryptlib"
+ ;;
+ *)
+ shrpldflags="$shrpldflags -b noentry $ldflags $libs $cryptlib"
+ ;;
+ esac
+ aixinstdir=`pwd | sed 's/\/UU$//'`
+ linklibperl="-L $archlibexp/CORE -L $aixinstdir -lperl"
+ ;;
+ hpux10*)
+ linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+b$archlibexp/CORE -lperl"
+ ;;
+ esac
+ ;;
+*) pldlflags=''
+ ;;
esac
+: Prepare dependency lists for Makefile.
+dynamic_list=' '
+for f in $dynamic_ext; do
+ : the dependency named here will never exist
+ base=`echo "$f" | sed 's/.*\///'`
+ dynamic_list="$dynamic_list lib/auto/$f/$base.$dlext"
+done
+
+static_list=' '
+for f in $static_ext; do
+ base=`echo "$f" | sed 's/.*\///'`
+ static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)"
+done
+
echo "Extracting Makefile (with variable substitutions)"
-cat >Makefile <<!GROK!THIS!
-# $Header: Makefile.SH,v 1.0.1.5 88/02/02 11:20:49 root Exp $
+$spitshell >Makefile <<!GROK!THIS!
+# Makefile.SH
+# This file is derived from Makefile.SH. Any changes made here will
+# be lost the next time you run Configure.
+# Makefile is used to generate $firstmakefile. The only difference
+# is that $firstmakefile has the dependencies filled in at the end.
#
-# $Log: Makefile.SH,v $
-# Revision 1.0.1.5 88/02/02 11:20:49 root
-# patch13: added d_symlink dependency, changed TEST to ./perl TEST.
-#
-# Revision 1.0.1.4 88/01/28 10:17:59 root
-# patch8: added perldb.man
-#
-# Revision 1.0.1.3 88/01/26 14:14:52 root
-# Added mallocsrc stuff.
-#
-# Revision 1.0.1.2 88/01/26 08:46:04 root
-# patch 4: make depend didn't work right if . wasn't in PATH.
-#
-# Revision 1.0.1.1 88/01/24 03:55:18 root
-# patch 2: remove extra Log lines.
-#
-# Revision 1.0 87/12/18 16:11:50 root
-# Initial revision
-#
-
+#
+# I now supply perly.c with the kits, so don't remake perly.c without byacc
+BYACC = $byacc
CC = $cc
-bin = $bin
-lib = $lib
-mansrc = $mansrc
-manext = $manext
-CFLAGS = $ccflags -O
+LD = $ld
+
LDFLAGS = $ldflags
+CLDFLAGS = $ldflags
+
SMALL = $small
LARGE = $large $split
mallocsrc = $mallocsrc
mallocobj = $mallocobj
-SLN = $sln
+LNS = $lns
+RMS = rm -f
+ranlib = $ranlib
+
+# The following are mentioned only to make metaconfig include the
+# appropriate questions in Configure. If you want to change these,
+# edit config.sh instead, or specify --man1dir=/wherever on
+# installman commandline.
+bin = $installbin
+scriptdir = $scriptdir
+shrpdir = $archlibexp/CORE
+privlib = $installprivlib
+man1dir = $man1dir
+man1ext = $man1ext
+man3dir = $man3dir
+man3ext = $man3ext
+
+# The following are used to build and install shared libraries for
+# dynamic loading.
+LDDLFLAGS = $lddlflags
+SHRPLDFLAGS = $shrpldflags
+CCDLFLAGS = $ccdlflags
+DLSUFFIX = .$dlext
+PLDLFLAGS = $pldlflags
+LIBPERL = $libperl
+LLIBPERL= $linklibperl
+SHRPENV = $shrpenv
+
+dynamic_ext = $dynamic_list
+static_ext = $static_list
+ext = \$(dynamic_ext) \$(static_ext)
+DYNALOADER = lib/auto/DynaLoader/DynaLoader\$(LIB_EXT)
+
+libs = $libs $cryptlib
+
+public = perl $suidperl utilities translators
+
+shellflags = $shellflags
+
+# This is set to MAKE=$make if your $make command doesn't
+# do it for you.
+$make_set_make
+
+# These variables may need to be manually set for non-Unix systems.
+AR = $ar
+EXE_EXT = $_exe
+LIB_EXT = $_a
+OBJ_EXT = $_o
+PATH_SEP = $p_
+
+FIRSTMAKEFILE = $firstmakefile
+
+# Any special object files needed by this architecture, e.g. os2/os2.obj
+ARCHOBJS = $archobjs
+
+.SUFFIXES: .c \$(OBJ_EXT)
+
+# grrr
+SHELL = $sh
-libs = $libnm -lm
!GROK!THIS!
-cat >>Makefile <<'!NO!SUBS!'
+## In the following dollars and backticks do not need the extra backslash.
+$spitshell >>Makefile <<'!NO!SUBS!'
-public = perl perldb
+CCCMD = `sh $(shellflags) cflags $(LIBPERL) $@`
-private =
+private = preplibrary lib/ExtUtils/Miniperl.pm lib/Config.pm
-manpages = perl.man perldb.man
+# Files to be built with variable substitution before miniperl
+# is available.
+sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \
+ makedir.SH perl_exp.SH writemain.SH
-util =
+shextract = Makefile cflags config.h makeaperl makedepend \
+ makedir perl.exp writemain
-sh = Makefile.SH makedepend.SH
+# Files to be built with variable substitution after miniperl is
+# available. Dependencies handled manually below (for now).
-h1 = EXTERN.h INTERN.h arg.h array.h cmd.h config.h form.h handy.h
-h2 = hash.h perl.h search.h spat.h stab.h str.h util.h
+pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL
-h = $(h1) $(h2)
+plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text
-c1 = arg.c array.c cmd.c dump.c form.c hash.c $(mallocsrc)
-c2 = search.c stab.c str.c util.c version.c
+addedbyconf = UU $(shextract) $(plextract) pstruct
-c = $(c1) $(c2)
+h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
+h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
+h3 = opcode.h patchlevel.h perl.h perly.h pp.h proto.h regcomp.h
+h4 = regexp.h scope.h sv.h unixish.h util.h perlio.h thread.h
+h5 = bytecode.h byterun.h
+h = $(h1) $(h2) $(h3) $(h4) $(h5)
-obj1 = arg.o array.o cmd.o dump.o form.o hash.o $(mallocobj)
-obj2 = search.o stab.o str.o util.o version.o
+c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c byterun.c
+c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c
+c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c globals.c perlio.c
-obj = $(obj1) $(obj2)
+c = $(c1) $(c2) $(c3) miniperlmain.c perlmain.c
-lintflags = -phbvxac
+obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) byterun$(OBJ_EXT)
+obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
+obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT)
-addedbyconf = Makefile.old bsd eunice filexp loc pdp11 usg v7
+obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
-# grrr
-SHELL = /bin/sh
+# Once perl has been Configure'd and built ok you build different
+# perl variants (Debugging, Embedded, Multiplicity etc) by saying:
+# make clean; make LIBPERL=libperl<type>.a
+# where <type> is some combination of 'd' and(or) 'e' or 'm'.
+# See cflags to understand how this works.
+#
+# This mechanism is getting clunky and might not even work any more.
+# EMBEDDING is on by default, and MULTIPLICITY doesn't work.
+#
-.c.o:
- $(CC) -c $(CFLAGS) $(LARGE) $*.c
+lintflags = -hbvxac
-all: $(public) $(private) $(util)
- touch all
+.c$(OBJ_EXT):
+ $(CCCMD) $(PLDLFLAGS) $*.c
-perl: $(obj) perl.o
- $(CC) $(LDFLAGS) $(LARGE) $(obj) perl.o $(libs) -o perl
+all: $(FIRSTMAKEFILE) miniperl $(private) $(plextract) $(public) $(dynamic_ext)
+ @echo " "; echo " Everything is up to date."
-perl.c: perl.y
- @ echo Expect 2 shift/reduce errors...
- yacc perl.y
- mv y.tab.c perl.c
+translators: miniperl lib/Config.pm FORCE
+ @echo " "; echo " Making x2p stuff"; cd x2p; $(MAKE) all
-perl.o: perl.c perly.c perl.h EXTERN.h search.h util.h INTERN.h handy.h
- $(CC) -c $(CFLAGS) $(LARGE) perl.c
+utilities: miniperl lib/Config.pm FORCE
+ @echo " "; echo " Making utilities"; cd utils; $(MAKE) all
-# if a .h file depends on another .h file...
-$(h):
- touch $@
-perl.man: perl.man.1 perl.man.2
- cat perl.man.1 perl.man.2 >perl.man
+# This is now done by installman only if you actually want the man pages.
+# @echo " "; echo " Making docs"; cd pod; $(MAKE) all;
+
+# Phony target to force checking subdirectories.
+# Apparently some makes require an action for the FORCE target.
+FORCE:
+ @sh -c true
+
+miniperlmain$(OBJ_EXT): miniperlmain.c
+ $(CCCMD) $(PLDLFLAGS) $*.c
+
+perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE)
+ sh writemain $(DYNALOADER) $(static_ext) > tmp
+ sh mv-if-diff tmp perlmain.c
+
+perlmain$(OBJ_EXT): perlmain.c
+ $(CCCMD) $(PLDLFLAGS) $*.c
+
+# The file ext.libs is a list of libraries that must be linked in
+# for static extensions, e.g. -lm -lgdbm, etc. The individual
+# static extension Makefile's add to it.
+ext.libs: $(static_ext)
+ -@test -f ext.libs || touch ext.libs
+
+!NO!SUBS!
+
+# How to build libperl. This is still rather convoluted.
+# Load up custom Makefile.SH fragment for shared loading and executables:
+if test -r $osname/Makefile.SHs ; then
+ . $osname/Makefile.SHs
+ $spitshell >>Makefile <<!GROK!THIS!
+
+Makefile: $osname/Makefile.SHs
+!GROK!THIS!
+else
+ $spitshell >>Makefile <<'!NO!SUBS!'
+$(LIBPERL): $& perl$(OBJ_EXT) $(obj)
+!NO!SUBS!
+ case "$useshrplib" in
+ true)
+ $spitshell >>Makefile <<'!NO!SUBS!'
+ $(LD) $(SHRPLDFLAGS) -o $@ perl$(OBJ_EXT) $(obj)
+!NO!SUBS!
+ case "$osname" in
+ aix)
+ $spitshell >>Makefile <<'!NO!SUBS!'
+ mv $@ libperl$(OBJ_EXT)
+ $(AR) qv $(LIBPERL) libperl$(OBJ_EXT)
+!NO!SUBS!
+ ;;
+ esac
+ ;;
+ *)
+ $spitshell >>Makefile <<'!NO!SUBS!'
+ rm -f $(LIBPERL)
+ $(AR) rcu $(LIBPERL) perl$(OBJ_EXT) $(obj)
+ @$(ranlib) $(LIBPERL)
+!NO!SUBS!
+ ;;
+ esac
+ $spitshell >>Makefile <<'!NO!SUBS!'
+
+# How to build executables.
+
+# The $& notation tells Sequent machines that it can do a parallel make,
+# and is harmless otherwise.
+# The miniperl -w -MExporter line is a basic cheap test to catch errors
+# before make goes on to run preplibrary and then MakeMaker on extensions.
+# This is very handy because later errors are often caused by miniperl
+# build problems but that's not obvious to the novice.
+# The Module used here must not depend on Config or any extensions.
+
+miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL)
+ $(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) $(LLIBPERL) $(libs)
+ @./miniperl -w -Ilib -MExporter -e 0 || $(MAKE) minitest
+
+perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ $(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+
+pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ $(SHRPENV) purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+
+purecovperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ $(SHRPENV) purecov $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o purecovperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+
+quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ $(SHRPENV) quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+
+# This version, if specified in Configure, does ONLY those scripts which need
+# set-id emulation. Suidperl must be setuid root. It contains the "taint"
+# checks as well as the special code to validate that the script in question
+# has been invoked correctly.
+
+suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ $(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+
+!NO!SUBS!
-install: perl perl.man
-# won't work with csh
- export PATH || exit 1
- - mv $(bin)/perl $(bin)/perl.old
- - if test `pwd` != $(bin); then cp $(public) $(bin); fi
- cd $(bin); \
-for pub in $(public); do \
-chmod 755 `basename $$pub`; \
-done
- - test $(bin) = /bin || rm -f /bin/perl
- - test $(bin) = /bin || ln -s $(bin)/perl /bin || cp $(bin)/perl /bin
-# chmod 755 makedir
-# - makedir `filexp $(lib)`
-# - \
-#if test `pwd` != `filexp $(lib)`; then \
-#cp $(private) `filexp $(lib)`; \
-#fi
-# cd `filexp $(lib)`; \
-#for priv in $(private); do \
-#chmod 755 `basename $$priv`; \
-#done
- - if test `pwd` != $(mansrc); then \
-for page in $(manpages); do \
-cp $$page $(mansrc)/`basename $$page .man`.$(manext); \
-done; \
fi
-clean:
- rm -f *.o
+$spitshell >>Makefile <<'!NO!SUBS!'
-realclean:
- rm -f perl *.orig */*.orig *.o core $(addedbyconf)
+sperl$(OBJ_EXT): perl.c perly.h patchlevel.h $(h)
+ $(RMS) sperl.c
+ $(LNS) perl.c sperl.c
+ $(CCCMD) -DIAMSUID sperl.c
+ $(RMS) sperl.c
+
+# We have to call our ./makedir because Ultrix 4.3 make can't handle the line
+# test -d lib/auto || mkdir lib/auto
+#
+preplibrary: miniperl lib/Config.pm $(plextract)
+ @sh ./makedir lib/auto
+ @echo " AutoSplitting perl library"
+ @./miniperl -Ilib -e 'use AutoSplit; \
+ autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm
+
+# Take care to avoid modifying lib/Config.pm without reason
+# (If trying to create a new port and having problems with the configpm script,
+# try 'make minitest' and/or commenting out the tests at the end of configpm.)
+lib/Config.pm: config.sh miniperl configpm
+ ./miniperl configpm tmp
+ sh mv-if-diff tmp lib/Config.pm
+
+lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl minimod.pl lib/Config.pm
+ ./miniperl minimod.pl > tmp && mv tmp $@
+
+$(plextract): miniperl lib/Config.pm
+ `echo ./miniperl -Ilib $@.PL`
+
+install: all install.perl install.man
+
+install.perl: all installperl
+ ./perl installperl
+
+install.man: all installman
+ ./perl installman
+
+# XXX Experimental. Hardwired values, but useful for testing.
+# Eventually Configure could ask for some of these values.
+install.html: all installhtml
+ ./perl installhtml \
+ --podroot=. --podpath=. --recurse \
+ --htmldir=$(privlib)/html \
+ --htmlroot=$(privlib)/html \
+ --splithead=pod/perlipc \
+ --splititem=pod/perlfunc \
+ --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \
+ --verbose
+
+
+# I now supply perly.c with the kits, so the following section is
+# used only if you force byacc to run by saying
+# make run_byacc
+# Since we patch up the byacc output, the perly.fixer script needs
+# to run with precisely the same version of byacc as I use. You
+# normally shouldn't remake perly.[ch].
+
+run_byacc: FORCE
+ @ echo 'Expect' 113 shift/reduce and 1 reduce/reduce conflict
+ $(BYACC) -d perly.y
+ chmod 664 perly.c
+ sh $(shellflags) ./perly.fixer y.tab.c perly.c
+ sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
+ -e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
+ echo 'extern YYSTYPE yylval;' >>y.tab.h
+ cmp -s y.tab.h perly.h && rm -f y.tab.h || mv y.tab.h perly.h
+ chmod 664 vms/perly_c.vms vms/perly_h.vms
+ perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
+
+# We don't want to regenerate perly.c and perly.h, but they might
+# appear out-of-date after a patch is applied or a new distribution is
+# made.
+perly.c: perly.y
+ -@sh -c true
+
+perly.h: perly.y
+ -@sh -c true
+
+SYM = global.sym interp.sym compat3.sym
+
+SYMH = perlvars.h thrdvar.h
+
+# The following files are generated automatically
+# keywords.h: keywords.pl
+# opcode.h: opcode.pl
+# embed.h: embed.pl global.sym interp.sym
+# byterun.h: bytecode.pl
+# byterun.c: bytecode.pl
+# lib/B/Asmdata.pm: bytecode.pl
+# The correct versions should be already supplied with the perl kit,
+# in case you don't have perl available.
+# To force them to run, type
+# make regen_headers
+regen_headers: FORCE
+ perl keywords.pl
+ perl opcode.pl
+ perl embed.pl
+ perl bytecode.pl
+
+# Extensions:
+# Names added to $(dynamic_ext) or $(static_ext) will automatically
+# get built. There should ordinarily be no need to change any of
+# this part of makefile.
+#
+# The dummy dependency is a place holder in case $(dynamic_ext) or
+# $(static_ext) is empty.
+#
+# DynaLoader may be needed for extensions that use Makefile.PL.
+
+$(DYNALOADER): miniperl preplibrary FORCE
+ @sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+
+d_dummy $(dynamic_ext): miniperl preplibrary $(DYNALOADER) FORCE
+ @sh ext/util/make_ext dynamic $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+
+s_dummy $(static_ext): miniperl preplibrary $(DYNALOADER) FORCE
+ @sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+
+clean: _tidy _mopup
+
+realclean: _cleaner _mopup
+ @echo "Note that make realclean does not delete config.sh or Policy.sh"
+
+clobber: _cleaner _mopup
+ rm -f config.sh cppstdin Policy.sh
+
+distclean: clobber
+
+# Do not 'make _mopup' directly.
+_mopup:
+ rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c
+ rm -f perl.exp ext.libs
+ -rm -f perl.export perl.dll perl.libexp perl.map perl.def
+ rm -f perl suidperl miniperl $(LIBPERL)
+
+# Do not 'make _tidy' directly.
+_tidy:
+ -cd pod; $(MAKE) clean
+ -cd utils; $(MAKE) clean
+ -cd x2p; $(MAKE) clean
+ -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
+ sh ext/util/make_ext clean $$x MAKE=$(MAKE) ; \
+ done
+
+# Do not 'make _cleaner' directly.
+_cleaner:
+ -cd os2; rm -f Makefile
+ -cd pod; $(MAKE) realclean
+ -cd utils; $(MAKE) realclean
+ -cd x2p; $(MAKE) realclean
+ -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
+ sh ext/util/make_ext realclean $$x MAKE=$(MAKE) ; \
+ done
+ rm -f *.orig */*.orig *~ */*~ core t/core t/c t/perl
+ rm -rf $(addedbyconf)
+ rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old
+ rm -f $(private)
+ rm -rf lib/auto
+ rm -f lib/.exists
+ rm -f h2ph.man pstruct
+ rm -rf .config
# The following lint has practically everything turned on. Unfortunately,
# you have to wade through a lot of mumbo jumbo that can't be suppressed.
# If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message
# for that spot.
-lint:
- lint $(lintflags) $(defs) $(c) > perl.fuzz
+lint: perly.c $(c)
+ lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz
-depend: makedepend
- ./makedepend
+# Need to unset during recursion to go out of loop.
+# The README below ensures that the dependency list is never empty and
+# that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding.
+
+MAKEDEPEND = Makefile makedepend
+
+$(FIRSTMAKEFILE): README $(MAKEDEPEND)
+ $(MAKE) depend MAKEDEPEND=
-test: perl
- chmod 755 t/TEST t/base.* t/comp.* t/cmd.* t/io.* t/op.*
- cd t && (rm -f perl; $(SLN) ../perl .) && ./perl TEST
+config.h: config_h.SH config.sh
+ $(SHELL) config_h.SH
-clist:
+# This is an AIXism.
+perl.exp: perl_exp.SH config.sh $(SYM) $(SYMH)
+ $(SHELL) perl_exp.SH
+
+# When done, touch perlmain.c so that it doesn't get remade each time.
+depend: makedepend
+ sh ./makedepend MAKE=$(MAKE)
+ - test -s perlmain.c && touch perlmain.c
+ cd x2p; $(MAKE) depend
+
+# Cannot postpone this until $firstmakefile is ready ;-)
+makedepend: makedepend.SH config.sh
+ sh ./makedepend.SH
+
+test-prep: miniperl perl preplibrary $(dynamic_ext)
+ cd t && (rm -f perl$(EXE_EXT); $(LNS) ../perl$(EXE_EXT) perl$(EXE_EXT))
+
+test check: test-prep
+ cd t && ./perl TEST </dev/tty
+
+# For testing without a tty or controling terminal. See t/op/stat.t
+test-notty: test-prep
+ cd t && PERL_SKIP_TTY_TEST=1 ./perl TEST
+
+# Can't depend on lib/Config.pm because that might be where miniperl
+# is crashing.
+minitest: miniperl
+ @echo "You may see some irrelevant test failures if you have been unable"
+ @echo "to build lib/Config.pm."
+ - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
+ && ./perl TEST base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t </dev/tty
+
+# Handy way to run perlbug -ok without having to install and run the
+# installed perlbug. We don't re-run the tests here - we trust the user.
+# Please *don't* use this unless all tests pass.
+# If you want to report test failures, just use "perlbug -Ilib".
+ok:
+ ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)'
+
+clist: $(c)
echo $(c) | tr ' ' '\012' >.clist
-hlist:
+hlist: $(h)
echo $(h) | tr ' ' '\012' >.hlist
-shlist:
+shlist: $(sh)
echo $(sh) | tr ' ' '\012' >.shlist
+pllist: $(pl)
+ echo $(pl) | tr ' ' '\012' >.pllist
+
+Makefile: Makefile.SH ./config.sh
+ $(SHELL) Makefile.SH
+
+distcheck: FORCE
+ perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()'
+
+etags:
+ sh emacs/ptags
+
# AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
-$(obj):
- @ echo "You haven't done a "'"make depend" yet!'; exit 1
-makedepend: makedepend.SH
- /bin/sh makedepend.SH
+# If this runs make out of memory, delete /usr/include lines.
!NO!SUBS!
+
$eunicefix Makefile
case `pwd` in
*SH)
$rm -f ../Makefile
- ln Makefile ../Makefile
+ $ln Makefile ../Makefile
;;
esac
+$rm -f $firstmakefile
projects / p5sagit/p5-mst-13.2.git / blobdiff