# how to tr(anslate) newlines
TRNL = '$trnl'
-# this is where the sources are
-src = $src
-# this is src quoted for use in regexen
-srcqre = `echo $src|sed -e 's@^\.$@\\\.@' -e 's@^\./$@\\\./@' -e 's@^\.\./@\\\.\\\./@g`
-
-# nice makes grok this
-!GROK!THIS!
-if $test X. != X$src; then
-$spitshell >>Makefile <<!GROK!THIS!
-VPATH = .:$src
!GROK!THIS!
-else
-$spitshell >>Makefile <<!GROK!THIS!
-VPATH = .
-!GROK!THIS!
-fi
## In the following dollars and backticks do not need the extra backslash.
$spitshell >>Makefile <<'!NO!SUBS!'
h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
h3 = opcode.h patchlevel.h perl.h perly.h pp.h proto.h regcomp.h
h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
-h5 = utf8.h warning.h
+h5 = utf8.h warnings.h
h = $(h1) $(h2) $(h3) $(h4) $(h5)
c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c
c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c
-c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c globals.c perlio.c
+c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c
+c4 = globals.c perlio.c
-c = $(c1) $(c2) $(c3) miniperlmain.c perlmain.c
+c = $(c1) $(c2) $(c3) $(c4) miniperlmain.c perlmain.c
obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
-obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT)
+obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT)
obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
FORCE:
@sh -c true
-miniperlmain$(OBJ_EXT): $(src)/miniperlmain.c
+miniperlmain$(OBJ_EXT): miniperlmain.c
$(CCCMD) $(PLDLFLAGS) $*.c
-perlmain.c: $(src)/miniperlmain.c config.sh $(FIRSTMAKEFILE)
+perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE)
sh writemain $(DYNALOADER) $(static_ext) > writemain.tmp
- sh $(src)/mv-if-diff writemain.tmp perlmain.c
+ sh mv-if-diff writemain.tmp perlmain.c
perlmain$(OBJ_EXT): perlmain.c
$(CCCMD) $(PLDLFLAGS) $*.c
# Load up custom Makefile.SH fragment for shared loading and executables:
case "$osname" in
cygwin*)
- Makefile_s="cygwin32/Makefile.SHs"
+ Makefile_s="cygwin/Makefile.SHs"
;;
*)
Makefile_s="$osname/Makefile.SHs"
$(AR) rcu $(LIBPERL_NONSHR) perl$(OBJ_EXT) $(obj)
$(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT)
- $(CC) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS)
+ $(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS)
MINIPERLEXP = $(MINIPERL_NONSHR)
!NO!SUBS!
;;
+os2)
+ $spitshell >>Makefile <<'!NO!SUBS!'
+MINIPERLEXP = miniperl
+
+perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map
+ ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) > perl.exp.tmp
+ sh mv-if-diff perl.exp.tmp perl5.def
+
+!NO!SUBS!
+ ;;
esac
if test -r $Makefile_s ; then
miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL)
$(LDLIBPTH) $(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) $(LLIBPERL) $(libs)
- $(LDLIBPTH) ./miniperl -w -Ilib -I$(src)/lib -MExporter -e 0 || $(MAKE) minitest
+ $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e 0 || $(MAKE) minitest
perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
$(SHRPENV) $(LDLIBPTH) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
$(CCCMD) -DIAMSUID sperl.c
$(RMS) sperl.c
-lib:
- @sh ./makedir lib
-
# We have to call our ./makedir because Ultrix 4.3 make can't handle the line
# test -d lib/auto || mkdir lib/auto
#
preplibrary: miniperl lib/Config.pm $(plextract)
@sh ./makedir lib/auto
@echo " AutoSplitting perl library"
- $(LDLIBPTH) ./miniperl -Ilib -I$(src)/lib -e 'use AutoSplit; \
- autosplit_lib_modules(@ARGV)' $(src)/lib/*.pm $(src)/lib/*/*.pm
+ $(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \
+ autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm
# Take care to avoid modifying lib/Config.pm without reason
# (If trying to create a new port and having problems with the configpm script,
# try 'make minitest' and/or commenting out the tests at the end of configpm.)
-lib/Config.pm: lib config.sh miniperl configpm
+lib/Config.pm: config.sh miniperl configpm
$(LDLIBPTH) ./miniperl configpm configpm.tmp
- sh $(src)/mv-if-diff configpm.tmp $@
-
-lib/ExtUtils: lib
- @sh ./makedir lib/ExtUtils
+ sh mv-if-diff configpm.tmp $@
-lib/ExtUtils/Miniperl.pm: lib/ExtUtils miniperlmain.c miniperl minimod.pl lib/Config.pm
+lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl minimod.pl lib/Config.pm
$(LDLIBPTH) ./miniperl minimod.pl > minimod.tmp
- sh $(src)/mv-if-diff minimod.tmp $@
+ sh mv-if-diff minimod.tmp $@
-lib/re.pm: lib $(src)/ext/re/re.pm
+lib/re.pm: ext/re/re.pm
rm -f $@
- cat $(src)/ext/re/re.pm > $@
+ cat ext/re/re.pm > $@
-pod:
- @sh ./makedir pod
-
-$(plextract): pod miniperl lib/Config.pm lib/re.pm
- $(LDLIBPTH) ./miniperl -Ilib -I$(src)/lib $(src)/$@.PL
+$(plextract): miniperl lib/Config.pm lib/re.pm
+ $(LDLIBPTH) ./miniperl -Ilib $@.PL
install: all install.perl install.man
# normally shouldn't remake perly.[ch].
run_byacc: FORCE
- @ echo 'Expect' 113 shift/reduce and 1 reduce/reduce conflict
$(BYACC) -d perly.y
chmod 664 perly.c
sh $(shellflags) ./perly.fixer y.tab.c perly.c
chmod 664 vms/perly_c.vms vms/perly_h.vms
perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
-perly$(OBJ_EXT): $(src)/perly.c
- $(CCCMD) $(PLDLFLAGS) $(src)/perly.c
-
# We don't want to regenerate perly.c and perly.h, but they might
# appear out-of-date after a patch is applied or a new distribution is
# made.
-perly.c: $(src)/perly.y
- -@sh -c true
-
-perly.h: $(src)/perly.y
- -@sh -c true
-
-# Both the above and below are needed for an out-of-source experience.
-$(src)/perly.c: $(src)/perly.y
+perly.c: perly.y
-@sh -c true
-$(src)/perly.h: $(src)/perly.y
+perly.h: perly.y
-@sh -c true
# No compat3.sym here since and including the 5.004_50.
# ext/ByteLoader/byterun.h: bytecode.pl
# ext/ByteLoader/byterun.c: bytecode.pl
# ext/B/Asmdata.pm: bytecode.pl
+# global.sym: embed.pl
# regnodes.h: regcomp.pl
-# warning.h lib/warning.pm: warning.pl
+# warnings.h lib/warnings.pm: warnings.pl
# The correct versions should be already supplied with the perl kit,
# in case you don't have perl available.
# To force them to run, type
perl embed.pl
perl bytecode.pl
perl regcomp.pl
- perl warning.pl
+ perl warnings.pl
# Extensions:
# Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will
# DynaLoader may be needed for extensions that use Makefile.PL.
$(DYNALOADER): miniperl preplibrary FORCE
- @$(LDLIBPTH) sh $(src)/ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+ @$(LDLIBPTH) sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
d_dummy $(dynamic_ext): miniperl preplibrary $(DYNALOADER) FORCE
- @$(LDLIBPTH) sh $(src)/ext/util/make_ext dynamic $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+ @$(LDLIBPTH) sh ext/util/make_ext dynamic $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
s_dummy $(static_ext): miniperl preplibrary $(DYNALOADER) FORCE
- @$(LDLIBPTH) sh $(src)/ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+ @$(LDLIBPTH) sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
n_dummy $(nonxs_ext): miniperl preplibrary $(DYNALOADER) FORCE
- @$(LDLIBPTH) sh $(src)/ext/util/make_ext nonxs $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+ @$(LDLIBPTH) sh ext/util/make_ext nonxs $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
clean: _tidy _mopup
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
$(LDLIBPTH) sh ext/util/make_ext realclean $$x MAKE=$(MAKE) ; \
done
- rm -f *.orig */*.orig *~ */*~ core core.perl.*.? core.miniperl.*.? perl.core miniperl.core t/core t/core.perl.*.? t/perl.core t/tmp???? t/c t/perl so_locations t/nonexistent1 so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
+ rm -f *.orig */*.orig *~ */*~ core core.*perl.*.? *perl.core t/core t/core.perl.*.? t/*perl.core t/misctmp* t/tmp* t/Io.dup t/tmon.out t/big t/c t/perl t/nonexistent1 so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
rm -rf $(addedbyconf)
rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old
rm -f $(private)
cd x2p; $(MAKE) depend
# Cannot postpone this until $firstmakefile is ready ;-)
-makedepend: $(src)/makedepend.SH config.sh
- sh $(src)/makedepend.SH
+makedepend: makedepend.SH config.sh
+ sh ./makedepend.SH
# Cannot delegate rebuilding of t/perl to make to allow interlaced
# test and minitest
# Please *don't* use this unless all tests pass.
# If you want to report test failures, use "make nok" instead.
ok: utilities
- $(LDLIBPTH) ./perl -Ilib -I$(src)/lib utils/perlbug -ok -s '(UNINSTALLED)'
+ $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)'
okfile: utilities
- $(LDLIBPTH) ./perl -Ilib -I$(src)/lib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok
+ $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok
nok: utilities
- $(LDLIBPTH) ./perl -Ilib -I$(src)/lib utils/perlbug -nok -s '(UNINSTALLED)'
+ $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)'
clist: $(c)
- echo $(c) | tr ' ' $(TRNL) | sed -e "s@^$(srcqre)/@@" >.clist
+ echo $(c) | tr ' ' $(TRNL) >.clist
hlist: $(h)
- echo $(h) | tr ' ' $(TRNL) | sed -e "s@^$(srcqre)/@@" >.hlist
+ echo $(h) | tr ' ' $(TRNL) >.hlist
shlist: $(sh)
- echo $(sh) | tr ' ' $(TRNL) | sed -e "s@^$(srcqre)/@@" >.shlist
+ echo $(sh) | tr ' ' $(TRNL) >.shlist
pllist: $(pl)
- echo $(pl) | tr ' ' $(TRNL) | sed -e "s@^$(srcqre)/@@" >.pllist
+ echo $(pl) | tr ' ' $(TRNL) >.pllist
Makefile: Makefile.SH ./config.sh
$(SHELL) Makefile.SH
projects / p5sagit/p5-mst-13.2.git / blobdiff