+#! /bin/sh
case $CONFIG in
'')
if test -f config.sh; then TOP=.;
*) suidperl='';;
esac
-shrpenv=""
-case "$d_shrplib" in
-*define*)
- patchlevel=`egrep '^#define[ ]+PATCHLEVEL' patchlevel.h \
- | awk '{print $3}'`
- case "$patchlevel" in
- *[0-9]) plibsuf=.$so.$patchlevel;;
- *) plibsuf=.$so;;
- esac
- if test "x$plibext" != "x" ; then plibsuf=$plibext d_shrplib=custom ; fi
- case "$shrpdir" in
- /usr/lib) ;;
- "") ;;
- *) shrpenv="env LD_RUN_PATH=$shrpdir";;
- esac
- pldlflags="$cccdlflags";;
-*) plibsuf=$lib_ext
- pldlflags="";;
+linklibperl='$(LIBPERL)'
+shrpldflags='$(LDDLFLAGS)'
+case "$useshrplib" in
+true)
+ pldlflags="$cccdlflags"
+ # NeXT-4 specific stuff. Can't we do this in the hint file?
+ case "${osname}${osvers}" in
+ next4*)
+ ld=libtool
+ lddlflags="-dynamic -undefined warning -framework System \
+ -compatibility_version 1 -current_version $patchlevel \
+ -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@"
+ ;;
+ sunos*|freebsd[23]*|netbsd*)
+ linklibperl="-lperl"
+ ;;
+ aix*)
+ shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp"
+ case "$osvers" in
+ 3*)
+ shrpldflags="$shrpldflags -e _nostart $ldflags $libs $cryptlib"
+ ;;
+ *)
+ shrpldflags="$shrpldflags -b noentry $ldflags $libs $cryptlib"
+ ;;
+ esac
+ aixinstdir=`pwd | sed 's/\/UU$//'`
+ linklibperl="-L $archlibexp/CORE -L $aixinstdir -lperl"
+ ;;
+ hpux10*)
+ linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+b$archlibexp/CORE -lperl"
+ ;;
+ esac
+ ;;
+*) pldlflags=''
+ ;;
esac
: Prepare dependency lists for Makefile.
done
static_list=' '
-static_ai_list=' '
for f in $static_ext; do
base=`echo "$f" | sed 's/.*\///'`
static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)"
- if test -f ext/$f/AutoInit.c; then
- static_ai_list="$static_ai_list ext/$f/AutoInit.c"
- fi
- if test -f ext/$f/AutoInit.pl; then
- static_ai_list="$static_ai_list ext/$f/AutoInit.pl"
- fi
done
echo "Extracting Makefile (with variable substitutions)"
-$spitshell >Makefile <<'!NO!SUBS!'
+$spitshell >Makefile <<!GROK!THIS!
# Makefile.SH
# This file is derived from Makefile.SH. Any changes made here will
# be lost the next time you run Configure.
-# Makefile is used to generate makefile. The only difference
-# is that makefile has the dependencies filled in at the end.
+# Makefile is used to generate $firstmakefile. The only difference
+# is that $firstmakefile has the dependencies filled in at the end.
#
#
-!NO!SUBS!
-
-$spitshell >>Makefile <<!GROK!THIS!
# I now supply perly.c with the kits, so don't remake perly.c without byacc
BYACC = $byacc
CC = $cc
# installman commandline.
bin = $installbin
scriptdir = $scriptdir
+shrpdir = $archlibexp/CORE
privlib = $installprivlib
man1dir = $man1dir
man1ext = $man1ext
# The following are used to build and install shared libraries for
# dynamic loading.
LDDLFLAGS = $lddlflags
+SHRPLDFLAGS = $shrpldflags
CCDLFLAGS = $ccdlflags
DLSUFFIX = .$dlext
PLDLFLAGS = $pldlflags
-PLIBSUF = $plibsuf
+LIBPERL = $libperl
+LLIBPERL= $linklibperl
SHRPENV = $shrpenv
dynamic_ext = $dynamic_list
static_ext = $static_list
ext = \$(dynamic_ext) \$(static_ext)
-static_ext_autoinit = $static_ai_list
DYNALOADER = lib/auto/DynaLoader/DynaLoader\$(LIB_EXT)
libs = $libs $cryptlib
shellflags = $shellflags
-## To use an alternate make, set \$altmake in config.sh.
-MAKE = ${altmake-make}
+# This is set to MAKE=$make if your $make command doesn't
+# do it for you.
+$make_set_make
-# These variables will be used in a future version to make
-# the make file more portable to non-unix systems.
+# These variables may need to be manually set for non-Unix systems.
AR = $ar
-EXE_EXT = $exe_ext
-LIB_EXT = $lib_ext
-OBJ_EXT = $obj_ext
-PATH_SEP = $path_sep
+EXE_EXT = $_exe
+LIB_EXT = $_a
+OBJ_EXT = $_o
+PATH_SEP = $p_
FIRSTMAKEFILE = $firstmakefile
.SUFFIXES: .c \$(OBJ_EXT)
+# grrr
+SHELL = $sh
+
!GROK!THIS!
## In the following dollars and backticks do not need the extra backslash.
$spitshell >>Makefile <<'!NO!SUBS!'
-CCCMD = `sh $(shellflags) cflags $(perllib) $@`
+CCCMD = `sh $(shellflags) cflags $(LIBPERL) $@`
private = preplibrary lib/ExtUtils/Miniperl.pm lib/Config.pm
makedir.SH perl_exp.SH writemain.SH
shextract = Makefile cflags config.h makeaperl makedepend \
- makedir perl_exp writemain
+ makedir perl.exp writemain
# Files to be built with variable substitution after miniperl is
# available. Dependencies handled manually below (for now).
h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
h3 = opcode.h patchlevel.h perl.h perly.h pp.h proto.h regcomp.h
-h4 = regexp.h scope.h sv.h unixish.h util.h
-h = $(h1) $(h2) $(h3) $(h4)
+h4 = regexp.h scope.h sv.h unixish.h util.h perlio.h thread.h
+h5 = bytecode.h byterun.h
+h = $(h1) $(h2) $(h3) $(h4) $(h5)
-c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c
+c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c byterun.c
c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c
-c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c globals.c
+c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c globals.c perlio.c
c = $(c1) $(c2) $(c3) miniperlmain.c perlmain.c
-obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT)
+obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) byterun$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
-obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) globals$(OBJ_EXT)
-
+obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT)
+
obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
# Once perl has been Configure'd and built ok you build different
# perl variants (Debugging, Embedded, Multiplicity etc) by saying:
-# make clean; make perllib=libperl<type>.a
+# make clean; make LIBPERL=libperl<type>.a
# where <type> is some combination of 'd' and(or) 'e' or 'm'.
# See cflags to understand how this works.
#
-# Eventually some form of 'make-a-perl' script will automate this
-# together with linking a perl executable with any desired
-# static modules.
-perllib = libperl$(PLIBSUF)
+# This mechanism is getting clunky and might not even work any more.
+# EMBEDDING is on by default, and MULTIPLICITY doesn't work.
+#
lintflags = -hbvxac
-# grrr
-SHELL = /bin/sh
-
.c$(OBJ_EXT):
$(CCCMD) $(PLDLFLAGS) $*.c
-all: makefile miniperl $(private) $(plextract) $(public) $(dynamic_ext)
+all: $(FIRSTMAKEFILE) miniperl $(private) $(plextract) $(public) $(dynamic_ext)
@echo " "; echo " Everything is up to date."
translators: miniperl lib/Config.pm FORCE
FORCE:
@sh -c true
-# The $& notation tells Sequent machines that it can do a parallel make,
-# and is harmless otherwise.
-# The miniperl -w -MExporter line is a basic cheap test to catch errors
-# before make goes on to run preplibrary and then MakeMaker on extensions.
-# This is very handy because later errors are often caused by miniperl
-# build problems but that's not obvious to the novice.
-# The Module used here must not depend on Config or any extensions.
-
-miniperl: $& miniperlmain$(OBJ_EXT) $(perllib)
- $(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) $(perllib) $(libs)
- @./miniperl -w -Ilib -MExporter -e 0 || $(MAKE) minitest
-
miniperlmain$(OBJ_EXT): miniperlmain.c
$(CCCMD) $(PLDLFLAGS) $*.c
-perlmain.c: miniperlmain.c config.sh makefile $(static_ext_autoinit)
+perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE)
sh writemain $(DYNALOADER) $(static_ext) > tmp
sh mv-if-diff tmp perlmain.c
ext.libs: $(static_ext)
-@test -f ext.libs || touch ext.libs
-perl: $& perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) ext.libs
- $(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
-
-pureperl: $& perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) ext.libs
- purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
-
-quantperl: $& perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) ext.libs
- quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
-
-$(perllib): $& perl$(OBJ_EXT) $(obj)
!NO!SUBS!
-case "$d_shrplib" in
-*define*)
-$spitshell >>Makefile <<'!NO!SUBS!'
- $(LD) $(LDDLFLAGS) -o $@ perl$(OBJ_EXT) $(obj)
-!NO!SUBS!
-;;
-custom)
-if test -r $osname/Makefile.SHs ; then
- . $osname/Makefile.SHs
- $spitshell >>Makefile <<!GROK!THIS!
+# How to build libperl. This is still rather convoluted.
+# Load up custom Makefile.SH fragment for shared loading and executables:
+if test -r $osname/Makefile.SHs ; then
+ . $osname/Makefile.SHs
+ $spitshell >>Makefile <<!GROK!THIS!
Makefile: $osname/Makefile.SHs
-
!GROK!THIS!
else
- echo "Could not find $osname/Makefile.SH! Skipping target \$(perllib) in Makefile!"
-fi
-;;
-*)
-$spitshell >>Makefile <<'!NO!SUBS!'
- rm -f $(perllib)
- $(AR) rcu $(perllib) perl$(OBJ_EXT) $(obj)
- @$(ranlib) $(perllib)
+ $spitshell >>Makefile <<'!NO!SUBS!'
+$(LIBPERL): $& perl$(OBJ_EXT) $(obj)
!NO!SUBS!
-;;
-esac
+ case "$useshrplib" in
+ true)
+ $spitshell >>Makefile <<'!NO!SUBS!'
+ $(LD) $(SHRPLDFLAGS) -o $@ perl$(OBJ_EXT) $(obj)
+!NO!SUBS!
+ case "$osname" in
+ aix)
+ $spitshell >>Makefile <<'!NO!SUBS!'
+ mv $@ libperl$(OBJ_EXT)
+ $(AR) qv $(LIBPERL) libperl$(OBJ_EXT)
+!NO!SUBS!
+ ;;
+ esac
+ ;;
+ *)
+ $spitshell >>Makefile <<'!NO!SUBS!'
+ rm -f $(LIBPERL)
+ $(AR) rcu $(LIBPERL) perl$(OBJ_EXT) $(obj)
+ @$(ranlib) $(LIBPERL)
+!NO!SUBS!
+ ;;
+ esac
+ $spitshell >>Makefile <<'!NO!SUBS!'
-$spitshell >>Makefile <<'!NO!SUBS!'
+# How to build executables.
+
+# The $& notation tells Sequent machines that it can do a parallel make,
+# and is harmless otherwise.
+# The miniperl -w -MExporter line is a basic cheap test to catch errors
+# before make goes on to run preplibrary and then MakeMaker on extensions.
+# This is very handy because later errors are often caused by miniperl
+# build problems but that's not obvious to the novice.
+# The Module used here must not depend on Config or any extensions.
+
+miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL)
+ $(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) $(LLIBPERL) $(libs)
+ @./miniperl -w -Ilib -MExporter -e 0 || $(MAKE) minitest
+
+perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ $(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+
+pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ $(SHRPENV) purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+
+purecovperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ $(SHRPENV) purecov $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o purecovperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+
+quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ $(SHRPENV) quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
# This version, if specified in Configure, does ONLY those scripts which need
# set-id emulation. Suidperl must be setuid root. It contains the "taint"
# checks as well as the special code to validate that the script in question
# has been invoked correctly.
-suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) ext.libs
- $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
+suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ $(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+
+!NO!SUBS!
+
+fi
+
+$spitshell >>Makefile <<'!NO!SUBS!'
sperl$(OBJ_EXT): perl.c perly.h patchlevel.h $(h)
$(RMS) sperl.c
autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm
# Take care to avoid modifying lib/Config.pm without reason
-lib/Config.pm: config.sh miniperl
+# (If trying to create a new port and having problems with the configpm script,
+# try 'make minitest' and/or commenting out the tests at the end of configpm.)
+lib/Config.pm: config.sh miniperl configpm
./miniperl configpm tmp
sh mv-if-diff tmp lib/Config.pm
./miniperl minimod.pl > tmp && mv tmp $@
$(plextract): miniperl lib/Config.pm
- ./miniperl -Ilib $@.PL
+ `echo ./miniperl -Ilib $@.PL`
install: all install.perl install.man
install.man: all installman
./perl installman
-# Not implemented yet.
-#install.html: all installhtml
-# ./perl installhtml
+# XXX Experimental. Hardwired values, but useful for testing.
+# Eventually Configure could ask for some of these values.
+install.html: all installhtml
+ ./perl installhtml \
+ --podroot=. --podpath=. --recurse \
+ --htmldir=$(privlib)/html \
+ --htmlroot=$(privlib)/html \
+ --splithead=pod/perlipc \
+ --splititem=pod/perlfunc \
+ --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \
+ --verbose
+
# I now supply perly.c with the kits, so the following section is
# used only if you force byacc to run by saying
# normally shouldn't remake perly.[ch].
run_byacc: FORCE
- @ echo 'Expect' 130 shift/reduce and 1 reduce/reduce conflict
+ @ echo 'Expect' 113 shift/reduce and 1 reduce/reduce conflict
$(BYACC) -d perly.y
+ chmod 664 perly.c
sh $(shellflags) ./perly.fixer y.tab.c perly.c
- mv y.tab.h perly.h
- echo 'extern YYSTYPE yylval;' >>perly.h
- - perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
+ sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
+ -e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
+ echo 'extern YYSTYPE yylval;' >>y.tab.h
+ cmp -s y.tab.h perly.h && rm -f y.tab.h || mv y.tab.h perly.h
+ chmod 664 vms/perly_c.vms vms/perly_h.vms
+ perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
# We don't want to regenerate perly.c and perly.h, but they might
# appear out-of-date after a patch is applied or a new distribution is
perly.h: perly.y
-@sh -c true
-# The following three header files are generated automatically
+# No compat3.sym here since and including the 5.004_50.
+SYM = global.sym interp.sym perlio.sym thread.sym
+
+SYMH = perlvars.h thrdvar.h
+
+# The following files are generated automatically
# keywords.h: keywords.pl
# opcode.h: opcode.pl
# embed.h: embed.pl global.sym interp.sym
+# byterun.h: bytecode.pl
+# byterun.c: bytecode.pl
+# lib/B/Asmdata.pm: bytecode.pl
# The correct versions should be already supplied with the perl kit,
# in case you don't have perl available.
# To force them to run, type
perl keywords.pl
perl opcode.pl
perl embed.pl
+ perl bytecode.pl
# Extensions:
# Names added to $(dynamic_ext) or $(static_ext) will automatically
# DynaLoader may be needed for extensions that use Makefile.PL.
$(DYNALOADER): miniperl preplibrary FORCE
- @sh ext/util/make_ext static $@ LIBPERL_A=$(perllib)
+ @sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
d_dummy $(dynamic_ext): miniperl preplibrary $(DYNALOADER) FORCE
- @sh ext/util/make_ext dynamic $@ LIBPERL_A=$(perllib)
+ @sh ext/util/make_ext dynamic $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
s_dummy $(static_ext): miniperl preplibrary $(DYNALOADER) FORCE
- @sh ext/util/make_ext static $@ LIBPERL_A=$(perllib)
+ @sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+
+clean: _tidy _mopup
+
+realclean: _cleaner _mopup
+ @echo "Note that make realclean does not delete config.sh or Policy.sh"
+
+clobber: _cleaner _mopup
+ rm -f config.sh cppstdin Policy.sh
-clean:
+distclean: clobber
+
+# Do not 'make _mopup' directly.
+_mopup:
rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c
rm -f perl.exp ext.libs
- -rm perl.export perl.dll perl.libexp perl.map perl.def
+ -rm -f perl.export perl.dll perl.libexp perl.map perl.def
+ rm -f perl suidperl miniperl $(LIBPERL)
+
+# Do not 'make _tidy' directly.
+_tidy:
-cd pod; $(MAKE) clean
-cd utils; $(MAKE) clean
-cd x2p; $(MAKE) clean
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
- sh ext/util/make_ext clean $$x ; \
+ sh ext/util/make_ext clean $$x MAKE=$(MAKE) ; \
done
- rm -f perl suidperl miniperl $(perllib)
-realclean: clean
+# Do not 'make _cleaner' directly.
+_cleaner:
-cd os2; rm -f Makefile
-cd pod; $(MAKE) realclean
-cd utils; $(MAKE) realclean
-cd x2p; $(MAKE) realclean
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
- sh ext/util/make_ext realclean $$x ; \
+ sh ext/util/make_ext realclean $$x MAKE=$(MAKE) ; \
done
rm -f *.orig */*.orig *~ */*~ core t/core t/c t/perl
rm -rf $(addedbyconf)
rm -f lib/.exists
rm -f h2ph.man pstruct
rm -rf .config
- @echo "Note that make realclean does not delete config.sh"
-
-clobber: realclean
- rm -f config.sh cppstdin
-
-distclean: clobber
# The following lint has practically everything turned on. Unfortunately,
# you have to wade through a lot of mumbo jumbo that can't be suppressed.
lint: perly.c $(c)
lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz
-# Need to unset during recursion to go out of loop
+# Need to unset during recursion to go out of loop.
+# The README below ensures that the dependency list is never empty and
+# that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding.
-MAKEDEPEND = makedepend
+MAKEDEPEND = Makefile makedepend
-$(FIRSTMAKEFILE): Makefile $(MAKEDEPEND)
+$(FIRSTMAKEFILE): README $(MAKEDEPEND)
$(MAKE) depend MAKEDEPEND=
-config.h: config.sh
- /bin/sh config_h.SH
+config.h: config_h.SH config.sh
+ $(SHELL) config_h.SH
+
+# This is an AIXism.
+perl.exp: perl_exp.SH config.sh $(SYM) $(SYMH)
+ $(SHELL) perl_exp.SH
# When done, touch perlmain.c so that it doesn't get remade each time.
depend: makedepend
- sh ./makedepend
+ sh ./makedepend MAKE=$(MAKE)
- test -s perlmain.c && touch perlmain.c
cd x2p; $(MAKE) depend
makedepend: makedepend.SH config.sh
sh ./makedepend.SH
-test: miniperl perl preplibrary $(dynamic_ext)
- - cd t && chmod +x TEST */*.t
- - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../perl$(EXE_EXT) perl$(EXE_EXT)) && ./perl TEST </dev/tty
+test-prep: miniperl perl preplibrary $(dynamic_ext)
+ cd t && (rm -f perl$(EXE_EXT); $(LNS) ../perl$(EXE_EXT) perl$(EXE_EXT))
+
+test check: test-prep
+ cd t && ./perl TEST </dev/tty
+
+# For testing without a tty or controling terminal. See t/op/stat.t
+test-notty: test-prep
+ cd t && PERL_SKIP_TTY_TEST=1 ./perl TEST
+# Can't depend on lib/Config.pm because that might be where miniperl
+# is crashing.
minitest: miniperl
- - cd t && chmod +x TEST */*.t
+ @echo "You may see some irrelevant test failures if you have been unable"
+ @echo "to build lib/Config.pm."
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
- && ./perl TEST base/*.t comp/*.t cmd/*.t io/*.t op/*.t </dev/tty
+ && ./perl TEST base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t </dev/tty
+
+# Handy way to run perlbug -ok without having to install and run the
+# installed perlbug. We don't re-run the tests here - we trust the user.
+# Please *don't* use this unless all tests pass.
+# If you want to report test failures, just use "perlbug -Ilib".
+ok: utilities
+ ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)'
clist: $(c)
echo $(c) | tr ' ' '\012' >.clist
pllist: $(pl)
echo $(pl) | tr ' ' '\012' >.pllist
+Makefile: Makefile.SH ./config.sh
+ $(SHELL) Makefile.SH
+
+distcheck: FORCE
+ perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()'
+
+etags:
+ sh emacs/ptags
+
# AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
# If this runs make out of memory, delete /usr/include lines.
!NO!SUBS!
projects / p5sagit/p5-mst-13.2.git / blobdiff