*) suidperl='';;
esac
-shrpenv=""
-case "$d_shrplib" in
-*define*)
+shrpdir=$archlibexp/CORE
+
+case "$useshrplib" in
+true)
pldlflags="$cccdlflags"
- patchlevel=`egrep '^#define[ ]+PATCHLEVEL' patchlevel.h \
- | awk '{print $3}'`
- if test -z "$isnext_4"
- then
- case "$patchlevel" in
- *[0-9]) plibsuf=.$so.$patchlevel;;
- *) plibsuf=.$so;;
+ case "$osname" in
+ os2) shrpenv='' ;;
+ *) shrpenv="env LD_RUN_PATH=$shrpdir";;
esac
- case "$shrpdir" in
- /usr/lib) ;;
- "") ;;
- *) shrpenv="env LD_RUN_PATH=$shrpdir";;
+ case "${osname}${osvers}" in
+ next4*)
+ # Can't we do this in the hint file?
+ ld='libtool -dynamic -undefined warning -framework System \
+ -compatibility_version 1 -current_version $(PATCHLEVEL) \
+ -prebind -seg1addr 0x27000000 -install_name $(SHRPDIR)/$@'
+ ;;
esac
- else
- # NeXT uses $patchlevel to set the current version of the dynamic
- # library produced later. And the Major release number in the name
- plibsuf=.5.$so
- fi;;
-*) plibsuf=$lib_ext
- pldlflags="";;
+ ;;
+*)
+ pldlflags=''
+ shrpenv=''
+ ;;
esac
: Prepare dependency lists for Makefile.
static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)"
done
-: ${bin_sh=/bin/sh}
-
echo "Extracting Makefile (with variable substitutions)"
-rm -f Makefile
$spitshell >Makefile <<!GROK!THIS!
# Makefile.SH
# This file is derived from Makefile.SH. Any changes made here will
SMALL = $small
LARGE = $large $split
-MAB = $mab
mallocsrc = $mallocsrc
mallocobj = $mallocobj
LNS = $lns
# installman commandline.
bin = $installbin
scriptdir = $scriptdir
-shrpdir = $shrpdir
+shrpdir = $archlibexp/CORE
privlib = $installprivlib
man1dir = $man1dir
man1ext = $man1ext
CCDLFLAGS = $ccdlflags
DLSUFFIX = .$dlext
PLDLFLAGS = $pldlflags
-PLIBSUF = $plibsuf
+LIBPERL = $libperl
SHRPENV = $shrpenv
dynamic_ext = $dynamic_list
shellflags = $shellflags
-## To use an alternate make, set \$altmake in config.sh.
-MAKE = ${altmake-make}
+# This is set to MAKE=$make if your $make command doesn't
+# do it for you.
+$make_set_make
# These variables will be used in a future version to make
# the make file more portable to non-unix systems.
.SUFFIXES: .c \$(OBJ_EXT)
-SHELL = $bin_sh
+# grrr
+SHELL = $sh
!GROK!THIS!
## In the following dollars and backticks do not need the extra backslash.
$spitshell >>Makefile <<'!NO!SUBS!'
-CCCMD = `sh $(shellflags) cflags $(perllib) $@`
+CCCMD = `sh $(shellflags) cflags $(LIBPERL) $@`
private = preplibrary lib/ExtUtils/Miniperl.pm lib/Config.pm
h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
h3 = opcode.h patchlevel.h perl.h perly.h pp.h proto.h regcomp.h
-h4 = regexp.h scope.h sv.h unixish.h util.h
+h4 = regexp.h scope.h sv.h unixish.h util.h perlio.h
h = $(h1) $(h2) $(h3) $(h4)
c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c
c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c
-c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c globals.c
+c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c globals.c perlio.c
c = $(c1) $(c2) $(c3) miniperlmain.c perlmain.c
obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
-obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT)
+obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT)
obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
# Once perl has been Configure'd and built ok you build different
# perl variants (Debugging, Embedded, Multiplicity etc) by saying:
-# make clean; make perllib=libperl<type>.a
+# make clean; make LIBPERL=libperl<type>.a
# where <type> is some combination of 'd' and(or) 'e' or 'm'.
# See cflags to understand how this works.
#
-# Eventually some form of 'make-a-perl' script will automate this
-# together with linking a perl executable with any desired
-# static modules.
-perllib = libperl$(PLIBSUF)
+# This mechanism is getting clunky and might not even work any more.
+# EMBEDDING is on by default, and MULTIPLICITY doesn't work.
+#
lintflags = -hbvxac
.c$(OBJ_EXT):
- $(CCCMD) $(MAB) $(PLDLFLAGS) $*.c
+ $(CCCMD) $(PLDLFLAGS) $*.c
all: $(FIRSTMAKEFILE) miniperl $(private) $(plextract) $(public) $(dynamic_ext)
@echo " "; echo " Everything is up to date."
# build problems but that's not obvious to the novice.
# The Module used here must not depend on Config or any extensions.
-miniperl: $& miniperlmain$(OBJ_EXT) $(perllib)
- $(CC) $(LARGE) $(MAB) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) $(perllib) $(libs)
+miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL)
+ $(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) $(LIBPERL) $(libs)
@./miniperl -w -Ilib -MExporter -e 0 || $(MAKE) minitest
miniperlmain$(OBJ_EXT): miniperlmain.c
- $(CCCMD) $(MAB) $(PLDLFLAGS) $*.c
+ $(CCCMD) $(PLDLFLAGS) $*.c
perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE)
sh writemain $(DYNALOADER) $(static_ext) > tmp
sh mv-if-diff tmp perlmain.c
perlmain$(OBJ_EXT): perlmain.c
- $(CCCMD) $(MAB) $(PLDLFLAGS) $*.c
+ $(CCCMD) $(PLDLFLAGS) $*.c
# The file ext.libs is a list of libraries that must be linked in
# for static extensions, e.g. -lm -lgdbm, etc. The individual
ext.libs: $(static_ext)
-@test -f ext.libs || touch ext.libs
-perl: $& perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) ext.libs
- $(SHRPENV) $(CC) $(LARGE) $(MAB) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
-
-pureperl: $& perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) ext.libs
- purify $(CC) $(LARGE) $(MAB) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
+perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ $(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LIBPERL) `cat ext.libs` $(libs)
-quantperl: $& perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) ext.libs
- quantify $(CC) $(LARGE) $(MAB) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
+pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LIBPERL) `cat ext.libs` $(libs)
-$(perllib): $& perl$(OBJ_EXT) $(obj)
-!NO!SUBS!
+quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LIBPERL) `cat ext.libs` $(libs)
-case "$d_shrplib" in
-*define*)
-if test -z "$isnext_4"
-then
-$spitshell >>Makefile <<'!NO!SUBS!'
- $(LD) $(LDDLFLAGS) -o $@ perl$(OBJ_EXT) $(obj)
-!NO!SUBS!
-else
-$spitshell >>Makefile <<!GROK!THIS!
- version=$patchlevel; \\
-!GROK!THIS!
-$spitshell >>Makefile <<'!NO!SUBS!'
- libtool -dynamic -undefined warning -framework System \
- -compatibility_version 1 -current_version $$version \
- -prebind -seg1addr 0x27000000 -install_name $(shrpdir)/$@ \
- -o $@ perl.o $(obj)
+$(LIBPERL): $& perl$(OBJ_EXT) $(obj)
!NO!SUBS!
-fi
-;;
-custom)
-if test -r $osname/Makefile.SHs ; then
- . $osname/Makefile.SHs
- $spitshell >>Makefile <<!GROK!THIS!
+# How to build libperl. This is still rather convoluted.
+# Load up custom Makefile.SH fragments?
+if test -r $osname/Makefile.SHs ; then
+ . $osname/Makefile.SHs
+ $spitshell >>Makefile <<!GROK!THIS!
Makefile: $osname/Makefile.SHs
-
!GROK!THIS!
else
- echo "Could not find $osname/Makefile.SH! Skipping target \$(perllib) in Makefile!"
-fi
-;;
-*)
-if test -z "$isnext_4"
-then
-$spitshell >>Makefile <<'!NO!SUBS!'
- rm -f $(perllib)
- $(AR) rcu $(perllib) perl$(OBJ_EXT) $(obj)
- @$(ranlib) $(perllib)
+ case "$useshrplib" in
+ true)
+ $spitshell >>Makefile <<'!NO!SUBS!'
+ $(LD) $(LDDLFLAGS) -o $@ perl$(OBJ_EXT) $(obj)
!NO!SUBS!
-else
-$spitshell >>Makefile <<'!NO!SUBS!'
- libtool -static -o $(perllib) perl.o $(obj)
+ ;;
+ *)
+ $spitshell >>Makefile <<'!NO!SUBS!'
+ rm -f $(LIBPERL)
+ $(AR) rcu $(LIBPERL) perl$(OBJ_EXT) $(obj)
+ @$(ranlib) $(LIBPERL)
!NO!SUBS!
+ ;;
+ esac
fi
-;;
-esac
-
+
$spitshell >>Makefile <<'!NO!SUBS!'
# This version, if specified in Configure, does ONLY those scripts which need
# checks as well as the special code to validate that the script in question
# has been invoked correctly.
-suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) ext.libs
- $(CC) $(LARGE) $(MAB) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
+suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
sperl$(OBJ_EXT): perl.c perly.h patchlevel.h $(h)
$(RMS) sperl.c
$(LNS) perl.c sperl.c
- $(CCCMD) $(MAB) -DIAMSUID sperl.c
+ $(CCCMD) -DIAMSUID sperl.c
$(RMS) sperl.c
# We have to call our ./makedir because Ultrix 4.3 make can't handle the line
@ echo 'Expect' 130 shift/reduce and 1 reduce/reduce conflict
$(BYACC) -d perly.y
sh $(shellflags) ./perly.fixer y.tab.c perly.c
- sed -e s/stderr/Perl_debug_log/g perly.c >perly.tmp && mv perly.tmp perly.c
+ sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' perly.c >perly.tmp && mv perly.tmp perly.c
mv y.tab.h perly.h
echo 'extern YYSTYPE yylval;' >>perly.h
- perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
# DynaLoader may be needed for extensions that use Makefile.PL.
$(DYNALOADER): miniperl preplibrary FORCE
- @sh ext/util/make_ext static $@ LIBPERL_A=$(perllib)
+ @sh ext/util/make_ext static $@ LIBPERL_A=$(LIBPERL)
d_dummy $(dynamic_ext): miniperl preplibrary $(DYNALOADER) FORCE
- @sh ext/util/make_ext dynamic $@ LIBPERL_A=$(perllib)
+ @sh ext/util/make_ext dynamic $@ LIBPERL_A=$(LIBPERL)
s_dummy $(static_ext): miniperl preplibrary $(DYNALOADER) FORCE
- @sh ext/util/make_ext static $@ LIBPERL_A=$(perllib)
+ @sh ext/util/make_ext static $@ LIBPERL_A=$(LIBPERL)
clean:
rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c
rm -f perl.exp ext.libs
- -rm perl.export perl.dll perl.libexp perl.map perl.def
+ -rm -f perl.export perl.dll perl.libexp perl.map perl.def
-cd pod; $(MAKE) clean
-cd utils; $(MAKE) clean
-cd x2p; $(MAKE) clean
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
sh ext/util/make_ext clean $$x ; \
done
- rm -f perl suidperl miniperl $(perllib)
+ rm -f perl suidperl miniperl $(LIBPERL)
realclean: clean
-cd os2; rm -f Makefile
makedepend: makedepend.SH config.sh
sh ./makedepend.SH
-test: miniperl perl preplibrary $(dynamic_ext)
+check test: miniperl perl preplibrary $(dynamic_ext)
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../perl$(EXE_EXT) perl$(EXE_EXT)) && ./perl TEST </dev/tty
-minitest: miniperl
+# Can't depend on lib/Config.pm because that might be where miniperl
+# is crashing.
+minitest: miniperl
+ @echo "You may see some irrelevant test failures if you have been unable"
+ @echo "to build lib/Config.pm."
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
&& ./perl TEST base/*.t comp/*.t cmd/*.t io/*.t op/*.t </dev/tty
pllist: $(pl)
echo $(pl) | tr ' ' '\012' >.pllist
+Makefile: Makefile.SH ./config.sh
+ $(SHELL) Makefile.SH
+
+distcheck : FORCE
+ perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()'
+
+manifest :
+ perl '-MExtUtils::Manifest=&mkmanifest' -e 'mkmanifest()'
+
# AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
# If this runs make out of memory, delete /usr/include lines.
!NO!SUBS!
projects / p5sagit/p5-mst-13.2.git / blobdiff