#! /bin/sh
-case $CONFIGDOTSH in
+case $PERL_CONFIG_SH in
'')
if test -f config.sh
then TOP=.
mallocsrc = $mallocsrc
mallocobj = $mallocobj
LNS = $lns
-CPS = $cp -f
+# NOTE: some systems don't grok "cp -f". XXX Configure test needed?
+CPS = $cp
RMS = rm -f
ranlib = $ranlib
$spitshell >>Makefile <<'!NO!SUBS!'
perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
- $(SHRPENV) $(LDLIBPTH) $(CC) -o perl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+ $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX) $(PERL_PROFILING) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
# Purify/Quantify Perls.
# Third Degree Perl (Tru64 only)
-perl.config.-g:
- @echo "Checking optimize='-g'..."
- @grep "^optimize=" config.sh
- @grep -q "^optimize='-g'" config.sh || exit 1
+perl.config.dashg:
+ @echo "Checking optimize='-g' in config.sh..."
+ @grep "^optimize=" config.sh
+ @grep "^optimize='-g'" config.sh >/dev/null || exit 1
perl.third.config: config.sh
@echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..."
- $(MAKE) perl.config.-g
- @echo "Checking usemymalloc='n'..."
- @grep "^usemymalloc=" config.sh
- @grep -q "^usemymalloc='n'" config.sh || exit 1
+ @$(MAKE) perl.config.dashg
+ @echo "Checking usemymalloc='n' in config.sh..."
+ @grep "^usemymalloc=" config.sh
+ @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
perl.third: /usr/bin/atom perl.third.config perl
atom -tool third -L. -all -gp -toolargs="-quiet -invalid -uninit heap+stack+partword+copy -min 0" perl
+ @echo "Now you may run perl.third and then study perl.3log."
# Pixie Perls (Tru64 and IRIX only)
-perl.pixie.atom.config: config.sh
+perl.pixie.config: config.sh
@echo "To build perl.pixie you must Configure -Doptimize=-g, checking..."
- $(MAKE) perl.config.-g
+ @$(MAKE) perl.config.dashg
-perl.pixie.atom: /usr/bin/atom perl.pixie.atom.config perl
+perl.pixie.atom: /usr/bin/atom perl
atom -tool pixie -L. -all -toolargs="-quiet" perl
perl.pixie.irix: perl
pixie perl
-perl.pixie: perl
+perl.pixie: /usr/bin/pixie perl.pixie.config perl
if test -x /usr/bin/atom; then \
$(MAKE) perl.pixie.atom; \
else \
$(MAKE) perl.pixie.irix; \
fi
+ @echo "Now you may run perl.pixie and then run pixie."
+
+# Gprof Perl
+
+perl.config.dashpg:
+ @echo "Checking optimize='-pg' in config.sh..."
+ @grep "^optimize=" config.sh
+ @grep "^optimize='-pg'" config.sh >/dev/null || exit 1
+
+perl.gprof.config: config.sh
+ @echo "To build perl.gprof you must Configure -Doptimize=-pg, checking..."
+ @$(MAKE) perl.config.dashpg
+
+perl.gprof: /usr/bin/gprof perl.gprof.config
+ $(MAKE) PERL_SUFFIX=.gprof PERL_PROFILING=-pg perl
+ @echo "Now you may run perl.gprof and then run gprof perl.gprof."
+
+# Microperl. This is just a convenience thing if one happens to
+# build also the full Perl and therefore the real big Makefile:
+# usually one should manually explicitly issue the below command.
+
+microperl:
+ $(MAKE) -f Makefile.micro
# This version, if specified in Configure, does ONLY those scripts which need
# set-id emulation. Suidperl must be setuid root. It contains the "taint"
# We have to call our ./makedir because Ultrix 4.3 make can't handle the line
# test -d lib/auto || mkdir lib/auto
#
-preplibrary: miniperl lib/Config.pm
+preplibrary: miniperl lib/Config.pm lib/lib.pm lib/re.pm
@sh ./makedir lib/auto
@echo " AutoSplitting perl library"
$(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \
install-strip:
$(MAKE) STRIPFLAGS=-s install
-install:
+install install-all:
$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS)
install-verbose:
rm -f h2ph.man pstruct
rm -rf .config
rm -f testcompile compilelog
- -rmdir lib/B lib/Data lib/Encode lib/IO/Socket lib/IO lib/Filter/Util lib/Sys lib/Thread
+ -rmdir lib/B lib/Data lib/Digest lib/Encode lib/IO/Socket lib/IO lib/Filter/Util lib/List lib/MIME lib/PerlIO lib/Scalar lib/Sys lib/Thread lib/XS
_realcleaner:
@$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean
PERL=./perl $(MAKE) _test_prep
_test_tty:
- cd t && $(LDLIBPTH) $(PERL_DEBUG) $(PERL) TEST $(UTF8) </dev/tty
+ cd t && $(LDLIBPTH) $(PERL_DEBUG) $(PERL) TEST $(TEST_ARGS) </dev/tty
_test_notty:
- cd t && $(LDLIBPTH) $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(PERL) TEST $(UTF8)
+ cd t && $(LDLIBPTH) $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(PERL) TEST $(TEST_ARGS)
# The second branch is for testing without a tty or controlling terminal,
# see t/op/stat.t
_test:
if (true </dev/tty) >/dev/null 2>&1; then \
- $(MAKE) _test_tty; \
+ $(MAKE) TEST_ARGS=$(TEST_ARGS) _test_tty ; \
else \
- $(MAKE) _test_notty; \
+ $(MAKE) TEST_ARGS=$(TEST_ARGS) _test_notty ; \
fi
+ @echo "Ran tests" > t/rantests
test check: test_prep
PERL=./perl $(MAKE) _test
test_notty: test_prep
PERL=./perl $(MAKE) _test_notty
-utest ucheck: test_prep
- PERL=./perl UTF8=-utf8 $(MAKE) _test
+utest ucheck test.utf8 check.utf8: test_prep
+ PERL=./perl TEST_ARGS=-utf8 $(MAKE) _test
-# Backward compat.
+test-prep: test_prep
test-tty: test_tty
PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 $(MAKE) _test
utest.third ucheck.third: test_prep.third perl.third
- PERL=./perl.third PERL_DEBUG=PERL_3LOG=1UTF=-utf8 $(MAKE) _test
+ PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 TEST_ARGS=-utf8 $(MAKE) _test
test_notty.third: test_prep.third perl.third
PERL=./perl.third $(MAKE) PERL_DEBUG=PERL_3LOG=1 _test_notty
+# Targets for Deparse testing.
+
+test.deparse: test_prep
+ PERL=./perl TEST_ARGS=-deparse $(MAKE) _test
+
+test_notty.deparse: test_prep
+ PERL=./perl TEST_ARGS=-deparse $(MAKE) _test_notty
+
# Can't depend on lib/Config.pm because that might be where miniperl
# is crashing.
minitest: miniperl lib/re.pm