. $TOP/config.sh
;;
esac
+
+# H.Merijn Brand [17 Feb 2004]
+# This comment is just to ensure that Configure will find variables that
+# are removed/replaced in patches on blead, but are still needed in the
+# 5.8.x, 5.6.x and 5.005.x maintainance tracks.
+# metaconfig -m will scan all .SH files on this level (not deeper), and
+# not in x2p and other subfolders. This file is as good as any .SH
+# patch references
+# #22227 $baserev
+# #22302 $yacc $byacc
+
: This forces SH files to create target in same directory as SH file.
: This is so that make depend always knows where to find SH derivatives.
case "$0" in
esac
pldlflags="$cccdlflags"
+ static_target='static_pic'
case "${osname}${osvers}" in
next4*)
ld=libtool
ldlibpth=`echo $ldlibpth | sed 's/:*$//'`
;;
esac
+
+ case "$ldlibpth" in
+ # Protect any spaces
+ *" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;;
+ esac
+
+ case "$osname" in
+ linux)
+ # If there is a pre-existing $libperl from a previous
+ # installation, Linux needs to use LD_PRELOAD to
+ # override the LD_LIBRARY_PATH setting. See the
+ # INSTALL file, under "Building a shared perl library".
+ # If there is no pre-existing $libperl, we don't need
+ # to do anything further.
+ if test -f $archlib/CORE/$libperl; then
+ rm -f preload
+ cat <<'EOT' > preload
+#! /bin/sh
+lib=$1
+shift
+test -r $lib && export LD_PRELOAD="$lib $LD_PRELOAD"
+exec "$@"
+EOT
+ chmod 755 preload
+ ldlibpth="$ldlibpth `pwd`/preload `pwd`/$libperl"
+ fi
+ ;;
+ os390) test -f /bin/env && ldlibpth="/bin/env $ldlibpth"
+ ;;
+ esac
+
;;
+
*) pldlflags=''
+ static_target='static'
;;
esac
nonxs_list="$nonxs_list ext/$f/pm_to_blib"
done
-# Handle the usage of different yaccs in posix-bc (During Configure we
-# us yacc for perly.y and byacc for a2p.y. The makefiles must use the
-# same configuration for run_byacc!):
-case "$osname" in
- posix-bc)
- byacc=$yacc
- ;;
-esac
-
echo "Extracting Makefile (with variable substitutions)"
$spitshell >Makefile <<!GROK!THIS!
# Makefile.SH
# be lost the next time you run Configure.
# Makefile is used to generate $firstmakefile. The only difference
# is that $firstmakefile has the dependencies filled in at the end.
-#
-#
-# I now supply perly.c with the kits, so don't remake perly.c without byacc
-BYACC = $byacc
+
CC = $cc
LD = $ld
LLIBPERL= $linklibperl
SHRPENV = $shrpenv
+# Static targets are ordinarily built without CCCDLFLAGS. However,
+# if building a shared libperl.so that might later be linked into
+# another application, then it might be appropriate to also build static
+# extensions (usually just DynaLoader) with relocatable code (e.g. -fPIC
+# for GNU cc). This is handled by ext/util/make_ext.
+STATIC = $static_target
+
# The following is used to include the current directory in
# the dynamic loader path you are building a shared libperl.
LDLIBPTH = $ldlibpth
## In the following dollars and backticks do not need the extra backslash.
$spitshell >>Makefile <<'!NO!SUBS!'
-CCCMD = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $(LIBPERL) $@`
+CCCMD = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $@`
-CCCMDSRC = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $(LIBPERL) $<`
+CCCMDSRC = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $<`
private = preplibrary lib/Config.pm lib/ExtUtils/Miniperl.pm
# available. Dependencies handled manually below (for now).
pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL \
- pod/pod2usage.PL pod/podchecker.PL pod/podselect.PL \
- pod/buildtoc.PL
+ pod/pod2usage.PL pod/podchecker.PL pod/podselect.PL
# lib/lib.pm is not listed here because it has a rule of its own.
plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text \
- pod/pod2usage pod/podchecker pod/podselect \
- pod/buildtoc
+ pod/pod2usage pod/podchecker pod/podselect
addedbyconf = UU $(shextract) $(plextract) lib/lib.pm pstruct
h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
-h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
-h3 = opcode.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
+h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h opcode.h
+h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
-h5 = utf8.h warnings.h sharedsv.h
+h5 = utf8.h warnings.h
h = $(h1) $(h2) $(h3) $(h4) $(h5)
-c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c
+c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c reentr.c
c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c
-c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c
-c4 = globals.c perlio.c perlapi.c numeric.c locale.c pp_pack.c pp_sort.c sharedsv.c
+c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c pad.c
+c4 = globals.c perlio.c perlapi.c numeric.c locale.c pp_pack.c pp_sort.c
c = $(c1) $(c2) $(c3) $(c4) miniperlmain.c perlmain.c
-obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT)
+obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
-obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT) sharedsv$(OBJ_EXT)
+obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)
obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
-# Once perl has been Configure'd and built ok you build different
-# perl variants (Debugging, Embedded, Multiplicity etc) by saying:
-# make clean; make LIBPERL=libperl<type>.a
-# where <type> is some combination of 'd' and(or) 'e' or 'm'.
-# See cflags to understand how this works.
-#
-# This mechanism is getting clunky and might not even work any more.
-# EMBEDDING is on by default, and MULTIPLICITY doesn't work.
-#
-
lintflags = -hbvxac
.c$(OBJ_EXT):
.c.s:
$(CCCMDSRC) -S $*.c
-.PHONY: all compile translators utilities
-
all: $(FIRSTMAKEFILE) miniperl$(EXE_EXT) extra.pods $(private) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
@echo " ";
@echo " Everything is up to date. Type '$(MAKE) test' to run test suite."
+.PHONY: all compile translators utilities
+
compile: all
echo "testing compilation" > testcompile;
cd utils; $(MAKE) compile;
sh writemain $(DYNALOADER) $(static_ext) > writemain.tmp
sh mv-if-diff writemain.tmp perlmain.c
+!NO!SUBS!
+case "$osname" in
+cygwin)
+ ;; # Let cygwin/Makefile.SHs do its work.
+*)
+ $spitshell >>Makefile <<'!NO!SUBS!'
perlmain$(OBJ_EXT): perlmain.c
$(CCCMD) $(PLDLFLAGS) $*.c
+!NO!SUBS!
+ ;;
+esac
+$spitshell >>Makefile <<'!NO!SUBS!'
# The file ext.libs is a list of libraries that must be linked in
# for static extensions, e.g. -lm -lgdbm, etc. The individual
# static extension Makefile's add to it.
esac
$spitshell >>Makefile <<'!NO!SUBS!'
perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH)
- ./$(MINIPERLEXP) makedef.pl PLATFORM=aix | sort -u | sort -f > perl.exp.tmp
+ ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp.tmp
sh mv-if-diff perl.exp.tmp perl.exp
!NO!SUBS!
MINIPERLEXP = miniperl
perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map
- ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) > perl.exp.tmp
+ ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl.exp.tmp
sh mv-if-diff perl.exp.tmp perl5.def
!NO!SUBS!
case "$useshrplib" in
true)
$spitshell >>Makefile <<'!NO!SUBS!'
- $(LD) -o $@ $(SHRPLDFLAGS) perl$(OBJ_EXT) $(obj)
+ $(LD) -o $@ $(SHRPLDFLAGS) perl$(OBJ_EXT) $(obj) $(libs)
!NO!SUBS!
case "$osname" in
aix)
$(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
+ darwin*)
+ case "$osvers" in
+ [1-6].*) ;;
+ *) case "$ldflags" in
+ *"-flat_namespace"*) ;;
+ *) # to allow opmini.o to override stuff in libperl.dylib
+ $spitshell >>Makefile <<!NO!SUBS!
+NAMESPACEFLAGS = -force_flat_namespace
+!NO!SUBS!
+ ;;
+ esac
+ ;;
+ esac
+ $spitshell >>Makefile <<'!NO!SUBS!'
+miniperl$(EXE_EXT): $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
+ -@rm -f miniperl.xok
+ $(CC) $(CLDFLAGS) $(NAMESPACEFLAGS) -o miniperl \
+ miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(LLIBPERL) $(libs)
+ $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
+!NO!SUBS!
+ ;;
*)
$spitshell >>Makefile <<'!NO!SUBS!'
miniperl$(EXE_EXT): $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
quantperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
$(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+# Valgrind perl (currently Linux only)
+
+perl.valgrind.config: config.sh
+ @echo "To build perl.valgrind you must Configure -Doptimize=-g -Uusemymalloc, checking..."
+ @$(MAKE) perl.config.dashg
+ @echo "Checking usemymalloc='n' in config.sh..."
+ @grep "^usemymalloc=" config.sh
+ @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
+ @echo "And of course you have to have valgrind..."
+ valgrind ./perl -e 1 2>/dev/null || exit 1
+
# Third Degree Perl (Tru64 only)
perl.config.dashg:
@grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
perl.third: /usr/bin/atom perl.third.config perl
- atom -tool third -L. -all -gp -toolargs="-quiet -invalid -uninit heap+stack+partword+copy -min 0" perl
+ atom -tool third -L. -all -gp -toolargs="-invalid -uninit heap+stack+copy -min 0" perl
@echo "Now you may run perl.third and then study perl.3log."
# Pixie Perls (Tru64 and IRIX only)
# We have to call our ./makedir because Ultrix 4.3 make can't handle the line
# test -d lib/auto || mkdir lib/auto
+# We need to autosplit in two steps because VOS can't handle so many args
#
.PHONY: preplibrary
-preplibrary: miniperl$(EXE_EXT) lib/Config.pm lib/lib.pm
+preplibrary: miniperl$(EXE_EXT) lib/Config.pm lib/lib.pm $(PREPLIBRARY_LIBPERL)
@sh ./makedir lib/auto
@echo " AutoSplitting perl library"
$(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \
- autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm
+ autosplit_lib_modules(@ARGV)' lib/*.pm
+ $(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \
+ autosplit_lib_modules(@ARGV)' lib/*/*.pm
$(MAKE) lib/re.pm
# Take care to avoid modifying lib/Config.pm without reason
# (If trying to create a new port and having problems with the configpm script,
# try 'make minitest' and/or commenting out the tests at the end of configpm.)
-lib/Config.pm: config.sh miniperl$(EXE_EXT) configpm
- $(LDLIBPTH) ./miniperl configpm configpm.tmp
+lib/Config.pm: config.sh miniperl$(EXE_EXT) configpm Porting/Glossary
+ $(LDLIBPTH) ./miniperl -Ilib configpm configpm.tmp
sh mv-if-diff configpm.tmp $@
lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl$(EXE_EXT) minimod.pl lib/Config.pm
lib/re.pm: ext/re/re.pm
cp ext/re/re.pm ext/re/re.tmp && sh mv-if-diff ext/re/re.tmp lib/re.pm
-$(plextract): miniperl$(EXE_EXT) lib/Config.pm
+$(plextract): miniperl$(EXE_EXT) lib/Config.pm x2p/s2p
@-rm -f $@
$(LDLIBPTH) ./miniperl -Ilib $@.PL
+x2p/s2p: miniperl$(EXE_EXT) lib/Config.pm x2p/s2p.PL
+ cd x2p; $(LDLIBPTH) $(MAKE) s2p
+
lib/lib.pm: miniperl$(EXE_EXT) lib/Config.pm
@-rm -f $@
$(LDLIBPTH) ./miniperl -Ilib lib/lib_pm.PL
done
-@rm -f pod/perlvms.pod
-@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods
+ -@rm -f pod/perldelta.pod
+ -@test -f pod/perl591delta.pod && cd pod && $(LNS) perl591delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods
extras.make: perl$(EXE_EXT)
- -@test -s extras.lst && $(LDLIBPTH) PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
+ -@test -s extras.lst && PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
extras.test: perl$(EXE_EXT)
- -@test -s extras.lst && $(LDLIBPTH) PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
+ -@test -s extras.lst && PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
extras.install: perl$(EXE_EXT)
- -@test -s extras.lst && $(LDLIBPTH) PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
+ -@test -s extras.lst && PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
.PHONY: install install-strip install-all install-verbose install-silent \
- no-install install.perl install.man installman install.html installhtml
+ no-install install.perl install.man install.html
+
+META.yml: Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm
+ $(LDLIBPTH) ./miniperl -Ilib Porting/makemeta
install-strip:
- $(MAKE) STRIPFLAGS=-s install
+ $(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)"
install install-all:
- $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS)
+ $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) DESTDIR="$(DESTDIR)"
install-verbose:
- $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V
+ $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V DESTDIR="$(DESTDIR)"
install-silent:
- $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S
+ $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S DESTDIR="$(DESTDIR)"
no-install:
- $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n
+ $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n DESTDIR="$(DESTDIR)"
+
+# Set this to an empty string to avoid an attempt of rebuild before install
+INSTALL_DEPENDENCE = all
-install.perl: all installperl
+install.perl: $(INSTALL_DEPENDENCE) installperl
if [ -n "$(COMPILE)" ]; \
then \
cd utils; $(MAKE) compile; \
cd ../pod; $(MAKE) compile; \
else :; \
fi
- $(LDLIBPTH) ./perl installperl $(INSTALLFLAGS) $(STRIPFLAGS)
+ $(LDLIBPTH) ./perl installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS)
$(MAKE) extras.install
install.man: all installman
- $(LDLIBPTH) ./perl installman $(INSTALLFLAGS)
+ $(LDLIBPTH) ./perl installman --destdir=$(DESTDIR) $(INSTALLFLAGS)
# XXX Experimental. Hardwired values, but useful for testing.
# Eventually Configure could ask for some of these values.
# I now supply perly.c with the kits, so the following section is
-# used only if you force byacc to run by saying
-# make run_byacc
-# Since we patch up the byacc output, the perly.fixer script needs
-# to run with precisely the same version of byacc as I use. You
-# normally shouldn't remake perly.[ch].
-
-.PHONY: check_byacc run_byacc
-
-check_byacc:
- @$(BYACC) -V 2>&1 | grep 'version 1\.8\.2'
-
-run_byacc: FORCE check_byacc
- $(BYACC) -d perly.y
- -chmod 664 perly.c perly.h
- sh $(shellflags) ./perly.fixer y.tab.c perly.c
- sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
- -e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
- sed -e '/^extern YYSTYPE yy/D' y.tab.h >yh.tmp && mv yh.tmp y.tab.h
- cmp -s y.tab.h perly.h && rm -f y.tab.h || mv y.tab.h perly.h
- perl -i perlyline.pl perly.c
- chmod 664 vms/perly_c.vms vms/perly_h.vms
- perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
+# used only if you force bison to run by saying
+# make regen_perly
+# You normally shouldn't remake perly.[ch].
+
+.PHONY: regen_perly
+
+run_byacc:
+ @echo "run_byacc is obsolete; try 'make regen_perly' instead"
+
+# this outputs perly.act and perly.tab
+regen_perly:
+ perl regen_perly.pl
# We don't want to regenerate perly.c and perly.h, but they might
# appear out-of-date after a patch is applied or a new distribution is
perly.h: perly.y
-@sh -c true
-PERLYVMS = vms/perly_c.vms vms/perly_h.vms
-
-$(PERLYVMS): perly.c perly.h vms/vms_yfix.pl
- perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
-
# No compat3.sym here since and including the 5.004_50.
# No interp.sym since 5.005_03.
SYM = global.sym globvar.sym perlio.sym pp.sym
CHMOD_W = chmod +w
# The following files are generated automatically
-# keywords.pl: keywords.h
-# opcode.pl: opcode.h opnames.h pp_proto.h pp.sym
-# [* embed.pl needs pp.sym generated by opcode.pl! *]
-# embed.pl: proto.h embed.h embedvar.h global.sym
-# perlapi.h perlapi.c pod/perlintern.pod
-# pod/perlapi.pod
+# autodoc.pl: pod/perlapi.pod pod/perlintern.pod
# bytecode.pl: ext/ByteLoader/byterun.h ext/ByteLoader/byterun.c
# ext/B/B/Asmdata.pm
+# embed.pl: proto.h embed.h embedvar.h global.sym
+# perlapi.h perlapi.c
+# [* embed.pl needs pp.sym generated by opcode.pl! *]
+# keywords.pl: keywords.h
+# opcode.pl: opcode.h opnames.h pp_proto.h pp.sym
# regcomp.pl: regnodes.h
# warnings.pl: warnings.h lib/warnings.pm
# The correct versions should be already supplied with the perl kit,
# in case you don't have perl available.
-# To force them to be regenerated, type
-# make regen_headers
+# To force them to be regenerated, run
+# perl regen.pl
+# with your existing copy of perl
+# (make regen_headers is kept for backwards compatibility)
AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \
embed.h embedvar.h global.sym \
.PHONY: regen_headers regen_pods regen_all
-regen_headers: FORCE
- -$(CHMOD_W) $(AUTOGEN_FILES)
- -perl keywords.pl
- -perl opcode.pl
- -perl embed.pl
- -perl bytecode.pl
- -perl regcomp.pl
- -perl warnings.pl
- -perl autodoc.pl
+regen regen_headers: FORCE
+ -perl regen.pl
regen_pods: FORCE
-cd pod; $(LDLIBPTH) $(MAKE) regen_pods
-regen_all: $(PERLYVMS) regen_headers regen_pods
+regen_all: regen regen_pods
+
+.PHONY: manisort manicheck
+
+manisort: FORCE
+ LC_ALL=C sort -fdc MANIFEST || (echo "WARNING: re-sorting MANIFEST"; \
+ LC_ALL=C sort -fdo MANIFEST MANIFEST)
+
+manicheck: FORCE
+ perl Porting/manicheck
# Extensions:
# Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will
# DynaLoader may be needed for extensions that use Makefile.PL.
$(DYNALOADER): miniperl$(EXE_EXT) preplibrary FORCE
- @$(LDLIBPTH) sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+ @$(LDLIBPTH) sh ext/util/make_ext $(STATIC) $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
d_dummy $(dynamic_ext): miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE
@$(LDLIBPTH) sh ext/util/make_ext dynamic $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
s_dummy $(static_ext): miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE
- @$(LDLIBPTH) sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+ @$(LDLIBPTH) sh ext/util/make_ext $(STATIC) $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
n_dummy $(nonxs_ext): miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE
@$(LDLIBPTH) sh ext/util/make_ext nonxs $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
# Do not 'make _mopup' directly.
_mopup:
rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c
+ -rmdir .depending
-@test -f extra.pods && rm -f `cat extra.pods`
-@test -f vms/README_vms.pod && rm -f vms/README_vms.pod
-rm -f perl.exp ext.libs extra.pods opmini.o
-rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
-rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs
-rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok
- -rm -f perlld cygwin.c ld2 libperl*.def libperl*.dll
- rm -f perl$(EXE_EXT) suidperl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl
+ -rm -f perlld cygwin.c ld2 libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
+ -rm -f perl$(EXE_EXT) suidperl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl
+ -rm -f opcode.h-old opnames.h-old pp.sym-old pp_proto.h-old
# Do not 'make _tidy' directly.
_tidy:
$(LDLIBPTH) sh ext/util/make_ext $(CLEAN) $$x MAKE=$(MAKE) ; \
done
+# Some systems do not support "?", so keep these files separate.
_cleaner2:
- rm -f core core.*perl.*.? *perl.core t/core t/core.perl.*.? t/*perl.core t/misctmp* t/forktmp* t/tmp* t/c t/perl$(EXE_EXT) t/rantests .?*.c so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
+ -rm -f core.*perl.*.? t/core.perl.*.? .?*.c
+ rm -f core *perl.core t/core t/*perl.core
+ rm -f t/misctmp* t/forktmp* t/tmp* t/c t/perl$(EXE_EXT) t/rantests
+ rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
rm -rf $(addedbyconf)
- rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old
- rm -f $(private)
+ rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old
+ rm -f $(private) lib/Config.pod
rm -rf lib/auto
rm -f lib/.exists lib/*/.exists lib/*/*/.exists
rm -f h2ph.man pstruct
rm -rf .config
+ rm -f preload
rm -f testcompile compilelog
- -rmdir lib/B lib/Data lib/Digest lib/Encode lib/IO/Socket lib/IO/t lib/IO
- -rmdir lib/Filter/Util lib/List lib/MIME lib/PerlIO lib/Scalar lib/Sys
- -rmdir lib/Thread lib/XS
+ -rmdir lib/B lib/Data lib/Digest
+ rm -rf lib/Encode
+ -rmdir lib/Filter/Util lib/IO/Socket lib/IO
+ -rmdir lib/List lib/MIME lib/Scalar lib/Sys
+ -rmdir lib/threads lib/XS
_realcleaner:
@$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean
.PHONY: test check test_prep test_prep_nodll test_prep_pre _test_prep \
test_tty test-tty _test_tty test_notty test-notty _test_notty \
- utest ucheck test.utf8 check.utf8 \
+ utest ucheck test.utf8 check.utf8 test.torture torturetest \
test.third check.third utest.third ucheck.third test_notty.third \
- test.deparse test_notty.deparse \
- minitest coretest
+ test.deparse test_notty.deparse test_harness test_harness_notty \
+ test.bytecompile minitest coretest test.taintwarn
# Cannot delegate rebuilding of t/perl to make
# to allow interlaced test and minitest
PERL=./perl $(MAKE) _test_prep
_test_tty:
- cd t && $(LDLIBPTH) $(PERL_DEBUG) $(PERL) $(TESTFILE) $(TEST_ARGS) </dev/tty
+ cd t && $(PERL_DEBUG) $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) </dev/tty
_test_notty:
- cd t && $(LDLIBPTH) $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(PERL) $(TESTFILE) $(TEST_ARGS)
+ cd t && $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS)
# The second branch is for testing without a tty or controlling terminal,
# see t/op/stat.t
test-notty: test_notty
+# Torture testing
+
+test.torture torturetest: test_prep
+ PERL=./perl TEST_ARGS=-torture $(MAKE) _test
+
+# Targets for valgrind testing:
+
+test_prep.valgrind: test_prep perl.valgrind
+ PERL=./perl $(MAKE) _test_prep
+
+test.valgrind check.valgrind: test_prep perl.valgrind.config
+ PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 $(MAKE) _test
+
+utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind
+ PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 TEST_ARGS=-utf8 $(MAKE) _test
+
+test_notty.valgrind: test_prep.valgrind perl.valgrind
+ PERL=./perl $(MAKE) PERL_DEBUG=PERL_VALGRIND=1 _test_notty
+
# Targets for Third Degree testing.
test_prep.third: test_prep perl.third
test_notty.third: test_prep.third perl.third
PERL=./perl.third $(MAKE) PERL_DEBUG=PERL_3LOG=1 _test_notty
+# Targets for Bytecode/ByteLoader testing.
+
+test.bytecompile: test_prep
+ PERL=./perl TEST_ARGS=-bytecompile $(MAKE) _test
+
# Targets for Deparse testing.
test.deparse: test_prep
test_notty.deparse: test_prep
PERL=./perl TEST_ARGS=-deparse $(MAKE) _test_notty
+# Targets to run the test suite with -t
+
+test.taintwarn: test_prep
+ PERL=./perl TEST_ARGS=-taintwarn $(MAKE) _test
+
# Can't depend on lib/Config.pm because that might be where miniperl
# is crashing.
minitest: miniperl$(EXE_EXT) lib/re.pm
+ -@test -f lib/lib.pm && test -f lib/Config.pm || \
+ $(MAKE) lib/Config.pm lib/lib.pm
+ @echo " "
@echo "You may see some irrelevant test failures if you have been unable"
- @echo "to build lib/Config.pm."
+ @echo "to build lib/Config.pm or lib/lib.pm."
+ @echo " "
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
- && $(LDLIBPTH) ./perl TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t </dev/tty
+ && $(LDLIBPTH) ./perl TEST -minitest base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
# Test via harness
test_harness: test_prep
PERL=./perl $(MAKE) TESTFILE=harness _test
+test_harness_notty: test_prep
+ PERL=./perl HARNESS_NOTTY=1 $(MAKE) TESTFILE=harness _test
+
# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.
# Please *don't* use this unless all tests pass.
# Now do any special processing required before building.
case "$ebcdic" in
-$define)
+define)
xxx=''
- echo "This is an EBCDIC system, checking if any parser files need regenerating." >&4
+ echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2
case "$osname" in
os390|posix-bc)
- rm -f y.tab.c y.tab.h
- # yacc must be a reentrant ("pure") Bison in BS2000 Posix!
- yacc -d perly.y >/dev/null 2>&1
- if cmp -s y.tab.c perly.c; then
- rm -f y.tab.c
- else
- echo "perly.y -> perly.c" >&2
- mv -f y.tab.c perly.c
- chmod u+w perly.c
- sed -e '/^#include "perl\.h"/a\
-\
-#define yydebug PL_yydebug\
-#define yynerrs PL_yynerrs\
-#define yyerrflag PL_yyerrflag\
-#define yychar PL_yychar\
-#define yyval PL_yyval\
-#define yylval PL_yylval' \
- -e '/YYSTYPE *yyval;/D' \
- -e '/YYSTYPE *yylval;/D' \
- -e '/int yychar,/,/yynerrs;/D' \
- -e 's/int yydebug = 0;/yydebug = 0;/' \
- -e 's/[^_]realloc(/PerlMem_realloc(/g' \
- -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
- -e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
- xxx="$xxx perly.c"
- fi
- if cmp -s y.tab.h perly.h; then
- rm -f y.tab.h
- else
- echo "perly.y -> perly.h" >&2
- mv -f y.tab.h perly.h
- xxx="$xxx perly.h"
- fi
if cd x2p
then
rm -f y.tab.c y.tab.h