esac
linklibperl='$(LIBPERL)'
+shrpldflags='$(LDDLFLAGS)'
case "$useshrplib" in
true)
pldlflags="$cccdlflags"
# NeXT-4 specific stuff. Can't we do this in the hint file?
case "${osname}${osvers}" in
next4*)
- ld='libtool -dynamic -undefined warning -framework System \
- -compatibility_version 1 -current_version $(PATCHLEVEL) \
- -prebind -seg1addr 0x27000000 -install_name $(SHRPDIR)/$@'
+ ld=libtool
+ lddlflags="-dynamic -undefined warning -framework System \
+ -compatibility_version 1 -current_version $patchlevel \
+ -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@"
;;
- sunos*|freebsd[23]*)
+ sunos*|freebsd[23]*|netbsd*)
linklibperl="-lperl"
;;
+ aix*)
+ shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp"
+ case "$osvers" in
+ 3*)
+ shrpldflags="$shrpldflags -e _nostart $ldflags $libs $cryptlib"
+ ;;
+ *)
+ shrpldflags="$shrpldflags -b noentry $ldflags $libs $cryptlib"
+ ;;
+ esac
+ aixinstdir=`pwd | sed 's/\/UU$//'`
+ linklibperl="-L $archlibexp/CORE -L $aixinstdir -lperl"
+ ;;
+ hpux10*)
+ linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+b$archlibexp/CORE -lperl"
+ ;;
esac
;;
*) pldlflags=''
# The following are used to build and install shared libraries for
# dynamic loading.
LDDLFLAGS = $lddlflags
+SHRPLDFLAGS = $shrpldflags
CCDLFLAGS = $ccdlflags
DLSUFFIX = .$dlext
PLDLFLAGS = $pldlflags
h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
h3 = opcode.h patchlevel.h perl.h perly.h pp.h proto.h regcomp.h
-h4 = regexp.h scope.h sv.h unixish.h util.h perlio.h
+h4 = regexp.h scope.h sv.h unixish.h util.h perlio.h thread.h
h = $(h1) $(h2) $(h3) $(h4)
c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c
case "$useshrplib" in
true)
$spitshell >>Makefile <<'!NO!SUBS!'
- $(LD) $(LDDLFLAGS) -o $@ perl$(OBJ_EXT) $(obj)
+ $(LD) $(SHRPLDFLAGS) -o $@ perl$(OBJ_EXT) $(obj)
+!NO!SUBS!
+ case "$osname" in
+ aix)
+ $spitshell >>Makefile <<'!NO!SUBS!'
+ mv $@ libperl$(OBJ_EXT)
+ $(AR) qv $(LIBPERL) libperl$(OBJ_EXT)
!NO!SUBS!
+ ;;
+ esac
;;
*)
$spitshell >>Makefile <<'!NO!SUBS!'
$(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
- purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+ $(SHRPENV) purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+
+purecovperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
+ $(SHRPENV) purecov $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o purecovperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
- quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+ $(SHRPENV) quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
# This version, if specified in Configure, does ONLY those scripts which need
# set-id emulation. Suidperl must be setuid root. It contains the "taint"
# has been invoked correctly.
suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
- $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+ $(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
!NO!SUBS!
autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm
# Take care to avoid modifying lib/Config.pm without reason
+# (If trying to create a new port and having problems with the configpm script,
+# try 'make minitest' and/or commenting out the tests at the end of configpm.)
lib/Config.pm: config.sh miniperl configpm
./miniperl configpm tmp
sh mv-if-diff tmp lib/Config.pm
./miniperl minimod.pl > tmp && mv tmp $@
$(plextract): miniperl lib/Config.pm
- ./miniperl -Ilib $@.PL
+ `echo ./miniperl -Ilib $@.PL`
install: all install.perl install.man
install.man: all installman
./perl installman
-# Not implemented yet.
-#install.html: all installhtml
-# ./perl installhtml
+# XXX Experimental. Hardwired values, but useful for testing.
+# Eventually Configure could ask for some of these values.
+install.html: all installhtml
+ ./perl installhtml \
+ --podroot=. --podpath=. --recurse \
+ --htmldir=$(privlib)/html \
+ --htmlroot=$(privlib)/html \
+ --splithead=pod/perlipc \
+ --splititem=pod/perlfunc \
+ --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \
+ --verbose
+
# I now supply perly.c with the kits, so the following section is
# used only if you force byacc to run by saying
run_byacc: FORCE
@ echo 'Expect' 113 shift/reduce and 1 reduce/reduce conflict
$(BYACC) -d perly.y
+ chmod 664 perly.c
sh $(shellflags) ./perly.fixer y.tab.c perly.c
sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
-e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
echo 'extern YYSTYPE yylval;' >>y.tab.h
cmp -s y.tab.h perly.h && rm -f y.tab.h || mv y.tab.h perly.h
- - perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
+ chmod 664 vms/perly_c.vms vms/perly_h.vms
+ perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
# We don't want to regenerate perly.c and perly.h, but they might
# appear out-of-date after a patch is applied or a new distribution is
perly.h: perly.y
-@sh -c true
-# The following three header files are generated automatically
+# The following files are generated automatically
# keywords.h: keywords.pl
# opcode.h: opcode.pl
# embed.h: embed.pl global.sym interp.sym
+# byterun.h: bytecode.pl
+# byterun.c: bytecode.pl
+# lib/B/Asmdata.pm: bytecode.pl
# The correct versions should be already supplied with the perl kit,
# in case you don't have perl available.
# To force them to run, type
perl keywords.pl
perl opcode.pl
perl embed.pl
+ perl bytecode.pl
# Extensions:
# Names added to $(dynamic_ext) or $(static_ext) will automatically
# DynaLoader may be needed for extensions that use Makefile.PL.
$(DYNALOADER): miniperl preplibrary FORCE
- @sh ext/util/make_ext static $@ LIBPERL_A=$(LIBPERL)
+ @sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
d_dummy $(dynamic_ext): miniperl preplibrary $(DYNALOADER) FORCE
- @sh ext/util/make_ext dynamic $@ LIBPERL_A=$(LIBPERL)
+ @sh ext/util/make_ext dynamic $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
s_dummy $(static_ext): miniperl preplibrary $(DYNALOADER) FORCE
- @sh ext/util/make_ext static $@ LIBPERL_A=$(LIBPERL)
+ @sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
clean: _tidy _mopup
-cd utils; $(MAKE) clean
-cd x2p; $(MAKE) clean
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
- sh ext/util/make_ext clean $$x ; \
+ sh ext/util/make_ext clean $$x MAKE=$(MAKE) ; \
done
# Do not 'make _cleaner' directly.
-cd utils; $(MAKE) realclean
-cd x2p; $(MAKE) realclean
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
- sh ext/util/make_ext realclean $$x ; \
+ sh ext/util/make_ext realclean $$x MAKE=$(MAKE) ; \
done
rm -f *.orig */*.orig *~ */*~ core t/core t/c t/perl
rm -rf $(addedbyconf)
lint: perly.c $(c)
lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz
-# Need to unset during recursion to go out of loop
+# Need to unset during recursion to go out of loop.
+# The README below ensures that the dependency list is never empty and
+# that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding.
-MAKEDEPEND = makedepend
+MAKEDEPEND = Makefile makedepend
-$(FIRSTMAKEFILE): Makefile $(MAKEDEPEND)
+$(FIRSTMAKEFILE): README $(MAKEDEPEND)
$(MAKE) depend MAKEDEPEND=
config.h: config_h.SH config.sh
# When done, touch perlmain.c so that it doesn't get remade each time.
depend: makedepend
- sh ./makedepend
+ sh ./makedepend MAKE=$(MAKE)
- test -s perlmain.c && touch perlmain.c
cd x2p; $(MAKE) depend
makedepend: makedepend.SH config.sh
sh ./makedepend.SH
-check test: miniperl perl preplibrary $(dynamic_ext)
- - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../perl$(EXE_EXT) perl$(EXE_EXT)) && ./perl TEST </dev/tty
+test-prep: miniperl perl preplibrary $(dynamic_ext)
+ cd t && (rm -f perl$(EXE_EXT); $(LNS) ../perl$(EXE_EXT) perl$(EXE_EXT))
+
+test check: test-prep
+ cd t && ./perl TEST </dev/tty
+
+# For testing without a tty or controling terminal. See t/op/stat.t
+test-notty: test-prep
+ cd t && PERL_SKIP_TTY_TEST=1 ./perl TEST
# Can't depend on lib/Config.pm because that might be where miniperl
# is crashing.
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
&& ./perl TEST base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t </dev/tty
+# Handy way to run perlbug -ok without having to install and run the
+# installed perlbug. We don't re-run the tests here - we trust the user.
+# Please *don't* use this unless all tests pass.
+# If you want to report test failures, just use "perlbug -Ilib".
+ok:
+ ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)'
+
clist: $(c)
echo $(c) | tr ' ' '\012' >.clist
distcheck: FORCE
perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()'
+etags:
+ sh emacs/ptags
+
# AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
# If this runs make out of memory, delete /usr/include lines.
!NO!SUBS!