#! /bin/sh
case $CONFIGDOTSH in
'')
- if test -f config.sh; then TOP=.;
- elif test -f ../config.sh; then TOP=..;
- elif test -f ../../config.sh; then TOP=../..;
- elif test -f ../../../config.sh; then TOP=../../..;
- elif test -f ../../../../config.sh; then TOP=../../../..;
+ if test -f config.sh
+ then TOP=.
else
echo "Can't find config.sh."; exit 1
fi
linklibperl='$(LIBPERL)'
shrpldflags='$(LDDLFLAGS)'
ldlibpth=''
+DPERL_EXTERNAL_GLOB='-DPERL_EXTERNAL_GLOB'
case "$useshrplib" in
true)
# Prefix all runs of 'miniperl' and 'perl' with
hpux*)
linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl"
;;
+ os390*)
+ shrpldflags='-W l,dll'
+ linklibperl='libperl.x'
+ DPERL_EXTERNAL_GLOB=''
+ ;;
esac
case "$ldlibpthname" in
'') ;;
nonxs_list="$nonxs_list ext/$f/pm_to_blib"
done
+# Handle the usage of different yaccs in posix-bc (During Configure we
+# us yacc for perly.y and byacc for a2p.y. The makefiles must use the
+# same configuration for run_byacc!):
+case "$osname" in
+ posix-bc)
+ byacc=$yacc
+ ;;
+esac
+
+case "$usedl" in
+define) testreqext="$testreqext \$(DYNALOADER)" ;;
+esac
+
+case "$DPERL_EXTERNAL_GLOB" in
+"") ;;
+*) testreqext="$testreqext \$(EXTGLOB)" ;;
+esac
+
echo "Extracting Makefile (with variable substitutions)"
$spitshell >Makefile <<!GROK!THIS!
# Makefile.SH
mallocsrc = $mallocsrc
mallocobj = $mallocobj
LNS = $lns
+CPS = $cp -f
RMS = rm -f
ranlib = $ranlib
nonxs_ext = $nonxs_list
ext = \$(dynamic_ext) \$(static_ext) \$(nonxs_ext)
DYNALOADER = lib/auto/DynaLoader/DynaLoader\$(LIB_EXT)
+EXTGLOB = lib/auto/File/Glob/Glob\$(DLSUFFIX)
+
+TESTREQEXT = $testreqext
libs = $perllibs $cryptlib
# Apparently some makes require an action for the FORCE target.
FORCE:
@sh -c true
+!NO!SUBS!
+$spitshell >>Makefile <<!GROK!THIS!
-opmini$(OBJ_EXT): op.c
- $(RMS) opmini.c
- $(LNS) op.c opmini.c
- $(CCCMD) $(PLDLFLAGS) -DPERL_EXTERNAL_GLOB opmini.c
- $(RMS) opmini.c
+# We do a copy of the op.c instead of a symlink because gcc gets huffy
+# if we have a symlink forest to another disk (it complains about too many
+# levels of symbolic links, even if we have only two)
+opmini\$(OBJ_EXT): op.c config.h
+ \$(RMS) opmini.c
+ \$(CPS) op.c opmini.c
+ \$(CCCMD) \$(PLDLFLAGS) $DPERL_EXTERNAL_GLOB opmini.c
+ \$(RMS) opmini.c
+
+!GROK!THIS!
+$spitshell >>Makefile <<'!NO!SUBS!'
miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h
$(CCCMD) $(PLDLFLAGS) $*.c
!NO!SUBS!
-# if test -f .patch ; then $spitshell >>Makefile <<'!NO!SUBS!'
-# patchlevel.h: .patch
-# perl fix_pl || (make -f Makefile.micro && ./microperl fix_pl)
-# $(SHELL) Makefile.SH
-# fi
-#
-# !NO!SUBS!
-
# How to build libperl. This is still rather convoluted.
# Load up custom Makefile.SH fragment for shared loading and executables:
case "$osname" in
case "$useshrplib" in
true)
$spitshell >>Makefile <<'!NO!SUBS!'
- $(LD) $(SHRPLDFLAGS) -o $@ perl$(OBJ_EXT) $(obj)
+ $(LD) -o $@ $(SHRPLDFLAGS) perl$(OBJ_EXT) $(obj)
!NO!SUBS!
case "$osname" in
aix)
$spitshell >>Makefile <<'!NO!SUBS!'
perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
- $(SHRPENV) $(LDLIBPTH) $(CC) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+ $(SHRPENV) $(LDLIBPTH) $(CC) -o perl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+
+# Purify/Quantify Perls.
pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
- $(SHRPENV) $(LDLIBPTH) purify $(CC) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+ $(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
purecovperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
- $(SHRPENV) $(LDLIBPTH) purecov $(CC) $(CLDFLAGS) $(CCDLFLAGS) -o purecovperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+ $(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
- $(SHRPENV) $(LDLIBPTH) quantify $(CC) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+ $(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+
+# Third Degree Perl (Tru64 only)
+
+perl.config.dashg:
+ @echo "Checking optimize='-g'..."
+ @grep "^optimize=" config.sh
+ @grep -q "^optimize='-g'" config.sh || exit 1
+
+perl.third.config: config.sh
+ @echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..."
+ @$(MAKE) perl.config.dashg
+ @echo "Checking usemymalloc='n'..."
+ @grep "^usemymalloc=" config.sh
+ @grep -q "^usemymalloc='n'" config.sh || exit 1
+
+perl.third: /usr/bin/atom perl.third.config perl
+ atom -tool third -L. -all -gp -toolargs="-quiet -invalid -uninit heap+stack+partword+copy -min 0" perl
+
+# Pixie Perls (Tru64 and IRIX only)
+
+perl.pixie.config: config.sh
+ @echo "To build perl.pixie you must Configure -Doptimize=-g, checking..."
+ @$(MAKE) perl.config.dashg
+
+perl.pixie.atom: /usr/bin/atom perl
+ atom -tool pixie -L. -all -toolargs="-quiet" perl
+
+perl.pixie.irix: perl
+ pixie perl
+
+perl.pixie: /usr/bin/pixie perl.pixie.config perl
+ if test -x /usr/bin/atom; then \
+ $(MAKE) perl.pixie.atom; \
+ else \
+ $(MAKE) perl.pixie.irix; \
+ fi
# This version, if specified in Configure, does ONLY those scripts which need
# set-id emulation. Suidperl must be setuid root. It contains the "taint"
# has been invoked correctly.
suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
- $(SHRPENV) $(LDLIBPTH) $(CC) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+ $(SHRPENV) $(LDLIBPTH) $(CC) -o suidperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
!NO!SUBS!
$spitshell >>Makefile <<'!NO!SUBS!'
-sperl$(OBJ_EXT): perl.c perly.h patchlevel.h $(h)
+sperl$(OBJ_EXT): perl.c $(h)
$(RMS) sperl.c
$(LNS) perl.c sperl.c
$(CCCMD) -DIAMSUID sperl.c
sh mv-if-diff minimod.tmp $@
lib/re.pm: ext/re/re.pm
- rm -f $@
+ @-rm -f $@
cat ext/re/re.pm > $@
$(plextract): miniperl lib/Config.pm
+ @-rm -f $@
$(LDLIBPTH) ./miniperl -Ilib $@.PL
lib/lib.pm: miniperl lib/Config.pm
+ @-rm -f $@
$(LDLIBPTH) ./miniperl -Ilib lib/lib_pm.PL
extra.pods: miniperl
run_byacc: FORCE
$(BYACC) -d perly.y
- -chmod 664 perly.c
+ -chmod 664 perly.c perly.h
sh $(shellflags) ./perly.fixer y.tab.c perly.c
sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
-e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
perly.h: perly.y
-@sh -c true
+PERLYVMS = vms/perly_c.vms vms/perly_h.vms
+
+$(PERLYVMS): perly.c perly.h vms/vms_yfix.pl
+ perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
+
# No compat3.sym here since and including the 5.004_50.
# No interp.sym since 5.005_03.
SYM = global.sym globvar.sym perlio.sym pp.sym
# To force them to be regenerated, type
# make regen_headers
+keywords.h: keywords.pl
+ -perl keywords.pl
+
+OPCODE_PL_OUTPUT = opcode.h opnames.h pp_proto.h pp.sym
+
+$(OPCODE_PL_OUTPUT): opcode.pl
+ -perl opcode.pl
+
+# Really the prerequisites for the next rule should only be "embed.pl pp.sym"
+# Writing it this way gives make a big hint to always run opcode.pl before
+# embed.pl. The alternative - running embed.pl then opcode.pl causes embed.pl
+# to be re-run next make invocation, and then all object files get recompiled.
+
+proto.h embed.h embedvar.h global.sym objXSUB.h perlapi.h perlapi.c pod/perlintern.pod pod/perlapi.pod: embed.pl $(OPCODE_PL_OUTPUT)
+ -perl embed.pl
+
+ext/ByteLoader/byterun.h ext/ByteLoader/byterun.c ext/B/B/Asmdata.pm: bytecode.pl
+ -perl bytecode.pl
+
+regnodes.h: regcomp.pl
+ -perl regcomp.pl
+
+warnings.h lib/warnings.pm: warnings.pl
+ -perl warnings.pl
+
AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \
embed.h embedvar.h global.sym \
pod/perlintern.pod pod/perlapi.pod \
regen_pods: FORCE
-cd pod; $(LDLIBPTH) make regen_pods
+regen_all: $(PERLYVMS) regen_headers regen_pods
+
# Extensions:
# Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will
# automatically get built. There should ordinarily be no need to change
-rm -f perl.exp ext.libs extra.pods opmini.o
-rm -f perl.export perl.dll perl.libexp perl.map perl.def
-rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap
+ -rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
+ -rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs
+ -rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts
rm -f perl suidperl miniperl $(LIBPERL) libperl.* microperl
# Do not 'make _tidy' directly.
rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old
rm -f $(private)
rm -rf lib/auto
- rm -f lib/.exists lib/*/.exists
+ rm -f lib/.exists lib/*/.exists lib/*/*/.exists
rm -f h2ph.man pstruct
rm -rf .config
rm -f testcompile compilelog
- -rmdir lib/B lib/Data lib/Encode lib/IO/Socket lib/IO lib/Sys lib/Thread
+ -rmdir lib/B lib/Data lib/Digest lib/Encode lib/MIME lib/IO/Socket lib/IO lib/Filter/Util lib/PerlIO lib/Sys lib/Thread lib/XS
_realcleaner:
@$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean
# If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message
# for that spot.
-lint: perly.c $(c)
+lint: $(c)
lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz
# Need to unset during recursion to go out of loop.
makedepend: makedepend.SH config.sh
sh ./makedepend.SH
-# Cannot delegate rebuilding of t/perl to make to allow interlaced
-# test and minitest
-test-prep: miniperl perl preplibrary utilities $(dynamic_ext) $(nonxs_ext) $(TEST_PERL_DLL)
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../perl$(EXE_EXT) perl$(EXE_EXT))
+# Cannot delegate rebuilding of t/perl to make
+# to allow interlaced test and minitest
+
+_test_prep: $(PERL)$(EXE_EXT)
+ cd t && (rm -f $(PERL)$(EXE_EXT); $(LNS) ../$(PERL)$(EXE_EXT) $(PERL)$(EXE_EXT))
-# Second branch is for testing without a tty or controling terminal.
-# See t/op/stat.t
-test check: test-prep
+test_prep: miniperl ./perl$(EXE_EXT) preplibrary utilities $(dynamic_ext) $(nonxs_ext) $(TEST_PERL_DLL)
+ PERL=./perl $(MAKE) _test_prep
+
+_test_tty:
+ cd t && $(LDLIBPTH) $(PERL_DEBUG) $(PERL) TEST $(UTF8) </dev/tty
+
+_test_notty:
+ cd t && $(LDLIBPTH) $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(PERL) TEST $(UTF8)
+
+# The second branch is for testing without a tty or controlling terminal,
+# see t/op/stat.t
+_test:
if (true </dev/tty) >/dev/null 2>&1; then \
- cd t && $(LDLIBPTH) ./perl TEST </dev/tty; \
+ $(MAKE) _test_tty; \
else \
- cd t && PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) ./perl TEST; \
+ $(MAKE) _test_notty; \
fi
@echo "Ran tests" > t/rantests
-utest ucheck: test-prep
- if (true </dev/tty) >/dev/null 2>&1; then \
- cd t && $(LDLIBPTH) ./perl UTEST </dev/tty; \
- else \
- cd t && PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) ./perl UTEST; \
- fi
+test check: test_prep $(TESTREQEXT)
+ PERL=./perl $(MAKE) _test
+
+test_tty: test_prep $(TESTREQEXT)
+ PERL=./perl $(MAKE) _test_tty
+
+test_notty: test_prep $(TESTREQEXT)
+ PERL=./perl $(MAKE) _test_notty
+
+utest ucheck: test_prep $(TESTREQEXT)
+ PERL=./perl UTF8=-utf8 $(MAKE) _test
+
+test-prep: test_prep
+
+test-tty: test_tty
+
+test-notty: test_notty
-# For testing without a tty or controling terminal. See t/op/stat.t
-test-notty: test-prep
- cd t && PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) ./perl TEST
+# Targets for Third Degree testing.
+
+test_prep.third: test_prep perl.third
+ PERL=./perl.third $(MAKE) _test_prep
+
+test.third check.third: test_prep.third perl.third $(TESTREQEXT)
+ PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 $(MAKE) _test
+
+utest.third ucheck.third: test_prep.third perl.third $(TESTREQEXT)
+ PERL=./perl.third PERL_DEBUG=PERL_3LOG=1UTF=-utf8 $(MAKE) _test
+
+test_notty.third: test_prep.third perl.third $(TESTREQEXT)
+ PERL=./perl.third $(MAKE) PERL_DEBUG=PERL_3LOG=1 _test_notty
# Can't depend on lib/Config.pm because that might be where miniperl
# is crashing.
@echo "You may see some irrelevant test failures if you have been unable"
@echo "to build lib/Config.pm."
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
- && $(LDLIBPTH) ./perl TEST base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t </dev/tty
+ && $(LDLIBPTH) ./perl TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t pragma/*.t </dev/tty
# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.
okfile: utilities
$(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok
+oknack: utilities
+ $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -A
+
+okfilenack: utilities
+ $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A
+
nok: utilities
$(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)'
nokfile: utilities
$(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok
+noknack: utilities
+ $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -A
+
+nokfilenack: utilities
+ $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A
+
clist: $(c)
echo $(c) | tr ' ' $(TRNL) >.clist
mv -f y.tab.c a2p.c
chmod u+w a2p.c
sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
+ -e 's|^static void __YY_YACC_MAIN.*BS2000.*|/*static main deleted*/|' \
-e 's/y\.tab/a2p/g' a2p.c >a2p.tmp && mv a2p.tmp a2p.c
xxx="$xxx a2p.c"
fi
projects / p5sagit/p5-mst-13.2.git / blobdiff