# grrr
SHELL = $sh
+# how to tr(anslate) newlines
+TRNL = '$trnl'
+
!GROK!THIS!
## In the following dollars and backticks do not need the extra backslash.
h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
h3 = opcode.h patchlevel.h perl.h perly.h pp.h proto.h regcomp.h
h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
-h5 = bytecode.h byterun.h
+h5 = bytecode.h byterun.h utf8.h warning.h
h = $(h1) $(h2) $(h3) $(h4) $(h5)
c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c byterun.c
-c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c
+c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c
c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c globals.c perlio.c
c = $(c1) $(c2) $(c3) miniperlmain.c perlmain.c
obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) byterun$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
-obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT)
+obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT)
obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
case "$osname" in
aix)
$spitshell >>Makefile <<'!NO!SUBS!'
+ rm -f libperl$(OBJ_EXT)
mv $@ libperl$(OBJ_EXT)
$(AR) qv $(LIBPERL) libperl$(OBJ_EXT)
!NO!SUBS!
# try 'make minitest' and/or commenting out the tests at the end of configpm.)
lib/Config.pm: config.sh miniperl configpm
$(LDLIBPTH) ./miniperl configpm tmp
- sh mv-if-diff tmp lib/Config.pm
+ sh mv-if-diff tmp $@
lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl minimod.pl lib/Config.pm
- $(LDLIBPTH) ./miniperl minimod.pl > tmp && mv tmp $@
+ $(LDLIBPTH) ./miniperl minimod.pl > tmp
+ sh mv-if-diff tmp $@
lib/re.pm: ext/re/re.pm
+ rm -f $@
cat ext/re/re.pm > $@
$(plextract): miniperl lib/Config.pm lib/re.pm
cd utils; $(MAKE) compile; \
cd ../x2p; $(MAKE) compile; \
cd ../pod; $(MAKE) compile; \
+ else :; \
fi
$(LDLIBPTH) ./perl installperl
sh $(shellflags) ./perly.fixer y.tab.c perly.c
sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
-e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
- echo 'extern YYSTYPE yylval;' >>y.tab.h
+ sed -e '/^extern YYSTYPE yy/D' y.tab.h >yh.tmp && mv yh.tmp y.tab.h
cmp -s y.tab.h perly.h && rm -f y.tab.h || mv y.tab.h perly.h
chmod 664 vms/perly_c.vms vms/perly_h.vms
perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
-@sh -c true
# No compat3.sym here since and including the 5.004_50.
-SYM = global.sym interp.sym perlio.sym thread.sym
+# No interp.sym since 5.005_03.
+SYM = global.sym perlio.sym thread.sym
SYMH = perlvars.h thrdvar.h
# byterun.c: bytecode.pl
# lib/B/Asmdata.pm: bytecode.pl
# regnodes.h: regcomp.pl
+# warning.h lib/warning.pm: warning.pl
# The correct versions should be already supplied with the perl kit,
# in case you don't have perl available.
# To force them to run, type
perl embed.pl
perl bytecode.pl
perl regcomp.pl
+ perl warning.pl
# Extensions:
# Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will
rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c
rm -f perl.exp ext.libs
-rm -f perl.export perl.dll perl.libexp perl.map perl.def
+ -rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap
rm -f perl suidperl miniperl $(LIBPERL)
# Do not 'make _tidy' directly.
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
sh ext/util/make_ext realclean $$x MAKE=$(MAKE) ; \
done
- rm -f *.orig */*.orig *~ */*~ core t/core t/c t/perl
+ rm -f *.orig */*.orig *~ */*~ core core.perl.*.? core.miniperl.*.? perl.core miniperl.core t/core t/core.perl.*.? t/perl.core t/tmp???? t/c t/perl
rm -rf $(addedbyconf)
rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old
rm -f $(private)
test check: test-prep
cd t && $(LDLIBPTH) ./perl TEST </dev/tty
+utest ucheck: test-prep
+ cd t && $(LDLIBPTH) ./perl UTEST </dev/tty
+
# For testing without a tty or controling terminal. See t/op/stat.t
test-notty: test-prep
cd t && PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) ./perl TEST
# Can't depend on lib/Config.pm because that might be where miniperl
# is crashing.
-minitest: miniperl
+minitest: miniperl lib/re.pm
@echo "You may see some irrelevant test failures if you have been unable"
@echo "to build lib/Config.pm."
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
$(LBLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)'
clist: $(c)
- echo $(c) | tr ' ' '\012' >.clist
+ echo $(c) | tr ' ' $(TRNL) >.clist
hlist: $(h)
- echo $(h) | tr ' ' '\012' >.hlist
+ echo $(h) | tr ' ' $(TRNL) >.hlist
shlist: $(sh)
- echo $(sh) | tr ' ' '\012' >.shlist
+ echo $(sh) | tr ' ' $(TRNL) >.shlist
pllist: $(pl)
- echo $(pl) | tr ' ' '\012' >.pllist
+ echo $(pl) | tr ' ' $(TRNL) >.pllist
Makefile: Makefile.SH ./config.sh
$(SHELL) Makefile.SH
;;
esac
$rm -f $firstmakefile
+
+# Now do any special processing required before building.
+
+case "$ebcdic" in
+$define)
+ xxx=''
+ echo "This is an EBCDIC system, checking if any parser files need regenerating." >&4
+case "$osname" in
+os390)
+ rm -f y.tab.c y.tab.h
+ yacc -d perly.y >/dev/null 2>&1
+ if cmp -s y.tab.c perly.c; then
+ rm -f y.tab.c
+ else
+ echo "perly.y -> perly.c" >&2
+ mv -f y.tab.c perly.c
+ chmod u+w perly.c
+ sed -e '/^#include "perl\.h"/a\
+\
+#define yydebug PL_yydebug\
+#define yynerrs PL_yynerrs\
+#define yyerrflag PL_yyerrflag\
+#define yychar PL_yychar\
+#define yyval PL_yyval\
+#define yylval PL_yylval' \
+ -e '/YYSTYPE *yyval;/D' \
+ -e '/YYSTYPE *yylval;/D' \
+ -e '/int yychar,/,/yynerrs;/D' \
+ -e 's/int yydebug = 0;/yydebug = 0;/' \
+ -e 's/[^_]realloc(/PerlMem_realloc(/g' \
+ -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
+ -e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
+ xxx="$xxx perly.c"
+ fi
+ if cmp -s y.tab.h perly.h; then
+ rm -f y.tab.h
+ else
+ echo "perly.y -> perly.h" >&2
+ mv -f y.tab.h perly.h
+ xxx="$xxx perly.h"
+ fi
+ cd x2p
+ rm -f y.tab.c
+ yacc a2p.y >/dev/null 2>&1
+ if cmp -s y.tab.c a2p.c
+ then
+ rm -f y.tab.c
+ else
+ echo "a2p.y -> a2p.c" >&2
+ mv -f y.tab.c a2p.c
+ chmod u+w a2p.c
+ sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
+ -e 's/y\.tab/a2p/g' a2p.c >a2p.tmp && mv a2p.tmp a2p.c
+ xxx="$xxx a2p.c"
+ fi
+ if cmp -s y.tab.h a2p.h
+ then
+ rm -f y.tab.h
+ else
+ echo "a2p.h -> a2p.h" >&2
+ mv -f y.tab.h a2p.h
+ xxx="$xxx a2p.h"
+ fi
+ cd ..
+ ;;
+vmesa)
+ # Do nothing in VM/ESA.
+ ;;
+esac
+ case "$xxx" in
+ '') echo "No parser files were regenerated. That's okay." >&2 ;;
+ esac
+ ;;
+esac
+