# #22227 $baserev
# #22302 $yacc $byacc
+# H.Merijn Brand [30 Oct 2004]
+# Mentioned for the same reason for future reference
+# #23434 $d_strlcat $d_strlcpy
+
: This forces SH files to create target in same directory as SH file.
: This is so that make depend always knows where to find SH derivatives.
case "$0" in
netbsd*|freebsd[234]*|openbsd*)
linklibperl="-L. -lperl"
;;
+ interix*)
+ linklibperl="-L. -lperl"
+ shrpldflags="$shrpldflags -Wl,--image-base,0x57000000"
+ ;;
aix*)
shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp"
case "$osvers" in
CCCMDSRC = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $<`
-private = preplibrary lib/Config.pm lib/ExtUtils/Miniperl.pm
+CONFIGPM = lib/Config.pm lib/Config_heavy.pl
+private = preplibrary $(CONFIGPM) lib/ExtUtils/Miniperl.pm
# Files to be built with variable substitution before miniperl
# is available.
c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c pad.c
c4 = globals.c perlio.c perlapi.c numeric.c locale.c pp_pack.c pp_sort.c
-c = $(c1) $(c2) $(c3) $(c4) miniperlmain.c perlmain.c
+c = $(c1) $(c2) $(c3) $(c4) miniperlmain.c perlmain.c opmini.c
obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
-lintflags = -hbvxac
+lintflags = \
+ -bh \
+ -p \
+ -s \
+ -Ncheck=%all \
+ -Nlevel=4 \
+ -errfmt=simple \
+ -errtags \
+ -erroff=E_BAD_PTR_CAST \
+ -erroff=E_BLOCK_DECL_UNUSED \
+ -erroff=E_CONSTANT_CONDITION \
+ -erroff=E_BAD_PTR_CAST_ALIGN \
+ -erroff=E_PTRDIFF_OVERFLOW \
+ -erroff=E_EXPR_NULL_EFFECT \
+ -erroff=E_BAD_PTR_INT_COMBINATION \
+ -erroff=E_LOOP_EMPTY \
+ *.c
.c$(OBJ_EXT):
$(CCCMD) $(PLDLFLAGS) $*.c
cd x2p; $(MAKE) compile;
cd pod; $(MAKE) compile;
-translators: miniperl$(EXE_EXT) lib/Config.pm FORCE
+translators: miniperl$(EXE_EXT) $(CONFIGPM) FORCE
@echo " "; echo " Making x2p stuff"; cd x2p; $(LDLIBPTH) $(MAKE) all
-utilities: miniperl$(EXE_EXT) lib/Config.pm $(plextract) lib/lib.pm FORCE
+utilities: miniperl$(EXE_EXT) $(CONFIGPM) $(plextract) lib/lib.pm FORCE
@echo " "; echo " Making utilities"; cd utils; $(LDLIBPTH) $(MAKE) all
# if we have a symlink forest to another disk (it complains about too many
# levels of symbolic links, even if we have only two)
-opmini\$(OBJ_EXT): op.c config.h
- \$(RMS) opmini.c
- \$(CPS) op.c opmini.c
+opmini.c: op.c
+ \$(CPS) op.c opmini.tmp
+ sh mv-if-diff opmini.tmp opmini.c
+
+opmini\$(OBJ_EXT): opmini.c
\$(CCCMD) \$(PLDLFLAGS) $DPERL_EXTERNAL_GLOB opmini.c
- \$(RMS) opmini.c
!GROK!THIS!
$spitshell >>Makefile <<'!NO!SUBS!'
!NO!SUBS!
case "${osname}${osvers}" in
- aix*)
+ aix*|beos*)
$spitshell >>Makefile <<'!NO!SUBS!'
miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
$(CC) -o miniperl $(CLDFLAGS) \
$(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
- beos*|next4*)
+ next4*)
$spitshell >>Makefile <<'!NO!SUBS!'
miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
$(CC) -o miniperl `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
# We need to autosplit in two steps because VOS can't handle so many args
#
.PHONY: preplibrary
-preplibrary: miniperl$(EXE_EXT) lib/Config.pm lib/lib.pm $(PREPLIBRARY_LIBPERL)
+preplibrary: miniperl$(EXE_EXT) $(CONFIGPM) lib/lib.pm $(PREPLIBRARY_LIBPERL)
@sh ./makedir lib/auto
@echo " AutoSplitting perl library"
$(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \
# Take care to avoid modifying lib/Config.pm without reason
# (If trying to create a new port and having problems with the configpm script,
# try 'make minitest' and/or commenting out the tests at the end of configpm.)
-lib/Config.pm: config.sh miniperl$(EXE_EXT) configpm Porting/Glossary
- $(LDLIBPTH) ./miniperl -Ilib configpm configpm.tmp
- sh mv-if-diff configpm.tmp $@
+$(CONFIGPM): config.sh miniperl$(EXE_EXT) configpm Porting/Glossary
+ $(LDLIBPTH) ./miniperl -Ilib configpm --heavy=lib/Config_heavy.pl configpm.tmp
+ sh mv-if-diff configpm.tmp lib/Config.pm
-lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl$(EXE_EXT) minimod.pl lib/Config.pm
+lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl$(EXE_EXT) minimod.pl $(CONFIGPM)
$(LDLIBPTH) ./miniperl minimod.pl > minimod.tmp
sh mv-if-diff minimod.tmp $@
-touch lib/ExtUtils/Miniperl.pm
lib/re.pm: ext/re/re.pm
cp ext/re/re.pm ext/re/re.tmp && sh mv-if-diff ext/re/re.tmp lib/re.pm
-$(plextract): miniperl$(EXE_EXT) lib/Config.pm x2p/s2p
+$(plextract): miniperl$(EXE_EXT) $(CONFIGPM) x2p/s2p
@-rm -f $@
- $(LDLIBPTH) ./miniperl -Ilib $@.PL
+ $(LDLIBPTH) ./miniperl -I`pwd`/lib $@.PL
-x2p/s2p: miniperl$(EXE_EXT) lib/Config.pm x2p/s2p.PL
+x2p/s2p: miniperl$(EXE_EXT) $(CONFIGPM) x2p/s2p.PL
cd x2p; $(LDLIBPTH) $(MAKE) s2p
-lib/lib.pm: miniperl$(EXE_EXT) lib/Config.pm
+lib/lib.pm: miniperl$(EXE_EXT) $(CONFIGPM)
@-rm -f $@
$(LDLIBPTH) ./miniperl -Ilib lib/lib_pm.PL
-$(unidatafiles): miniperl$(EXE_EXT) lib/Config.pm lib/unicore/mktables
+unidatafiles $(unidatafiles): uni.data
+
+uni.data: miniperl$(EXE_EXT) $(CONFIGPM) lib/unicore/mktables
cd lib/unicore && $(LDLIBPTH) ../../miniperl -I../../lib mktables -w
+ touch uni.data
extra.pods: miniperl$(EXE_EXT)
-@test -f extra.pods && rm -f `cat extra.pods`
-@rm -f pod/perlvms.pod
-@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods
-@rm -f pod/perldelta.pod
- -@test -f pod/perl592delta.pod && cd pod && $(LNS) perl592delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods
-
+ -@test -f pod/perl593delta.pod && cd pod && $(LNS) perl593delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc
extras.make: perl$(EXE_EXT)
-@test -s extras.lst && PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
# Do not 'make _mopup' directly.
_mopup:
- rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c
+ rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c
-rmdir .depending
-@test -f extra.pods && rm -f `cat extra.pods`
-@test -f vms/README_vms.pod && rm -f vms/README_vms.pod
- -rm -f perl.exp ext.libs extra.pods opmini.o
+ -rm -f perl.exp ext.libs extra.pods uni.data opmini.o
-rm -f perl.export perl.dll perl.libexp perl.map perl.def
-rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap
-rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
rm -rf .config
rm -f preload
rm -f testcompile compilelog
- -rmdir lib/B lib/Data lib/Digest
rm -rf lib/Encode
+ rm -f lib/ExtUtils/ParseXS/t/XSTest.c
+ rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT)
+ rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX)
+ -rmdir lib/B lib/Data
-rmdir lib/Filter/Util lib/IO/Socket lib/IO
-rmdir lib/List lib/MIME lib/Scalar lib/Sys
-rmdir lib/threads lib/XS
@$(LDLIBPTH) $(MAKE) _cleaner2
-rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig
-# The following lint has practically everything turned on. Unfortunately,
-# you have to wade through a lot of mumbo jumbo that can't be suppressed.
-# If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message
-# for that spot.
-
.PHONY: lint
lint: $(c)
- lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz
+ rm -f *.ln
+ lint $(lintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(c) perly.c
# Need to unset during recursion to go out of loop.
# The README below ensures that the dependency list is never empty and
.PHONY: test check test_prep test_prep_nodll test_prep_pre _test_prep \
test_tty test-tty _test_tty test_notty test-notty _test_notty \
utest ucheck test.utf8 check.utf8 test.torture torturetest \
+ test.utf16 check.utf16 utest.utf16 ucheck.utf16 \
test.third check.third utest.third ucheck.third test_notty.third \
test.deparse test_notty.deparse test_harness test_harness_notty \
test.bytecompile minitest coretest test.taintwarn
test.torture torturetest: test_prep
PERL=./perl TEST_ARGS=-torture $(MAKE) _test
+# Targets for UTF16 testing:
+
+minitest.utf16: minitest.prep
+ - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
+ && $(LDLIBPTH) ./perl TEST -minitest -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
+
+test.utf16 check.utf16: test_prep
+ PERL=./perl $(MAKE) TEST_ARGS=-utf16 _test
+
+utest.utf16 ucheck.utf16: test_prep
+ PERL=./perl $(MAKE) TEST_ARGS="-utf8 -utf16" _test
+
# Targets for valgrind testing:
test_prep.valgrind: test_prep perl.valgrind
test.taintwarn: test_prep
PERL=./perl TEST_ARGS=-taintwarn $(MAKE) _test
-# Can't depend on lib/Config.pm because that might be where miniperl
-# is crashing.
-minitest: miniperl$(EXE_EXT) lib/re.pm
+minitest.prep:
-@test -f lib/lib.pm && test -f lib/Config.pm || \
$(MAKE) lib/Config.pm lib/lib.pm $(unidatafiles)
@echo " "
@echo "You may see some irrelevant test failures if you have been unable"
@echo "to build lib/Config.pm, lib/lib.pm or the Unicode data files."
@echo " "
+
+# Can't depend on lib/Config.pm because that might be where miniperl
+# is crashing.
+minitest: miniperl$(EXE_EXT) lib/re.pm minitest.prep
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
&& $(LDLIBPTH) ./perl TEST -minitest base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
TAGS: emacs/cperl-mode.elc
sh emacs/ptags
-ctags: tags
-
# Let's hope make will not go into an infinite loop on case-unsensitive systems
# This may also fail if . is in the head of the path, since perl will
# require -Ilib
tags: TAGS
perl emacs/e2ctags.pl TAGS > tags
+ctags:
+ ctags -f Tags --totals --languages=c --langmap=c:+.h *.c *.h
+
# AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
# If this runs make out of memory, delete /usr/include lines.
!NO!SUBS!
;;
esac
+# ex: set ts=8 sts=4 sw=4 noet: