L<"Reporting Problems"> below.
For information on what's new in this release, see the
-pod/perl5100delta.pod file. For more detailed information about specific
+pod/perl5110delta.pod file. For more detailed information about specific
changes, see the Changes file.
=head1 DESCRIPTION
=head2 Changes and Incompatibilities
-Please see pod/perl5100delta.pod for a description of the changes and
+Please see pod/perl5110delta.pod for a description of the changes and
potential incompatibilities introduced with this release. A few of
the most important issues are listed below, but you should refer
-to pod/perl5100delta.pod for more detailed information.
+to pod/perl5110delta.pod for more detailed information.
B<WARNING:> This version is not binary compatible with prior releases of Perl.
If you have built extensions (i.e. modules that include C code)
On a related issue, old modules may possibly be affected by the changes
in the Perl language in the current release. Please see
-pod/perl5100delta.pod for a description of what's changed. See your
+pod/perl5110delta.pod for a description of what's changed. See your
installed copy of the perllocal.pod file for a (possibly incomplete)
list of locally installed modules. Also see CPAN::autobundle for one
way to make a "bundle" of your currently installed modules.
directories ahead of those in APPLLIB_EXP by using any of the standard
run-time methods: $PERLLIB, $PERL5LIB, -I, use lib, etc.
-=item USE_SITECUSTOMIZE
+=item usesitecustomize
Run-time customization of @INC can be enabled with:
sh Configure -Dusesitecustomize
-Which will define USE_SITECUSTOMIZE and $Config{usesitecustomize}.
-When enabled, make perl run F<$sitelibexp/sitecustomize.pl> before
+which will define USE_SITECUSTOMIZE and $Config{usesitecustomize}.
+When enabled, this makes perl run F<$sitelibexp/sitecustomize.pl> before
anything else. This script can then be set up to add additional
entries to @INC.
then don't worry about the warning message. The extension
Makefile.PL goes looking for various libraries needed on various
systems; few systems will need all the possible libraries listed.
-For example, a system may have -lcposix or -lposix, but it's
-unlikely to have both, so most users will see warnings for the one
-they don't have. The phrase 'probably harmless' is intended to
-reassure you that nothing unusual is happening, and the build
-process is continuing.
+Most users will see warnings for the ones they don't have. The
+phrase 'probably harmless' is intended to reassure you that nothing
+unusual is happening, and the build process is continuing.
On the other hand, if you are building GDBM_File and you get the
message
by hand to see if it makes any difference. If individual tests
bomb, you can run them by hand, e.g.,
- ./perl op/groups.t
+ cd t ; ./perl -MTestInit op/groups.t
Another way to get more detailed information about failed tests and
individual subtests is to cd to the t directory and run
- ./perl harness
+ cd t ; ./perl harness <list of tests>
(this assumes that most basic tests succeed, since harness uses
-complicated constructs). For extension and library tests you
-need a little bit more: you need to setup your environment variable
-PERL_CORE to a true value (like "1"), and you need to supply the
-right Perl library path:
+complicated constructs). If no list of tests is provided, harness
+will run all tests.
- setenv PERL_CORE 1
- ./perl -I../lib ../ext/Socket/Socket.t
- ./perl -I../lib ../lib/less.t
-
-(For csh-like shells on UNIX; adjust appropriately for other platforms.)
You should also read the individual tests to see if there are any helpful
comments that apply to your system. You may also need to setup your
shared library path if you get errors like:
Note: One possible reason for errors is that some external programs
may be broken due to the combination of your environment and the way
-B<make test> exercises them. For example, this may happen if you have
+'make test' exercises them. For example, this may happen if you have
one or more of these environment variables set: LC_ALL LC_CTYPE
LC_COLLATE LANG. In some versions of UNIX, the non-English locales
are known to cause programs to exhibit mysterious errors.
these tests might fail. If possible, try running the tests again
with the system under a lighter load. These timing-sensitive
and load-sensitive tests include F<t/op/alarm.t>,
-F<ext/Time/HiRes/HiRes.t>, F<lib/Benchmark.t>,
+F<ext/Time/HiRes/t/HiRes.t>, F<ext/threads/shared/t/waithires.t>,
+F<ext/threads/shared/t/stress.t>, F<lib/Benchmark.t>,
F<lib/Memoize/t/expmod_t.t>, and F<lib/Memoize/t/speed.t>.
+You might also experience some failures in F<t/op/stat.t> if you build
+perl on an NFS filesystem, if the remote clock and the system clock are
+different.
+
=item Out of memory
On some systems, particularly those with smaller amounts of RAM, some
Try stopping other jobs on the system and then running the test by itself:
- cd t; ./perl op/pat.t
+ cd t; ./perl -MTestInit op/pat.t
to see if you have any better luck. If your perl still fails this
test, it does not necessarily mean you have a broken perl. This test
tries to exercise the regular expression subsystem quite thoroughly,
and may well be far more demanding than your normal usage.
+=item libgcc_s.so.1: cannot open shared object file
+
+This message has been reported on gcc-3.2.3 and earlier installed with
+a non-standard prefix. Setting the LD_LIBRARY_PATH environment variable
+(or equivalent) to include gcc's lib/ directory with the libgcc_s.so.1
+shared library should fix the problem.
+
=item Failures from lib/File/Temp/t/security saying "system possibly insecure"
First, such warnings are not necessarily serious or indicative of a
See also L<"Maintaining completely separate versions"> for another
approach.
+=head1 cd /usr/include; h2ph *.h sys/*.h
+
+Some perl scripts need to be able to obtain information from the
+system header files. This command will convert the most commonly used
+header files in /usr/include into files that can be easily interpreted
+by perl. These files will be placed in the architecture-dependent
+library ($archlib) directory you specified to Configure.
+
+Note: Due to differences in the C and perl languages, the conversion
+of the header files is not perfect. You will probably have to
+hand-edit some of the converted files to get them to parse correctly.
+For example, h2ph breaks spectacularly on type casting and certain
+structures.
+
+=head1 installhtml --help
+
+Some sites may wish to make perl documentation available in HTML
+format. The installhtml utility can be used to convert pod
+documentation into linked HTML files and install them.
+
+Currently, the supplied ./installhtml script does not make use of the
+html Configure variables. This should be fixed in a future release.
+
+The following command-line is an example of one used to convert
+perl documentation:
+
+ ./installhtml \
+ --podroot=. \
+ --podpath=lib:ext:pod:vms \
+ --recurse \
+ --htmldir=/perl/nmanual \
+ --htmlroot=/perl/nmanual \
+ --splithead=pod/perlipc \
+ --splititem=pod/perlfunc \
+ --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \
+ --verbose
+
+See the documentation in installhtml for more details. It can take
+many minutes to execute a large installation and you should expect to
+see warnings like "no title", "unexpected directive" and "cannot
+resolve" as the files are processed. We are aware of these problems
+(and would welcome patches for them).
+
+You may find it helpful to run installhtml twice. That should reduce
+the number of "cannot resolve" warnings.
+
+=head1 cd pod && make tex && (process the latex files)
+
+Some sites may also wish to make the documentation in the pod/ directory
+available in TeX format. Type
+
+ (cd pod && make tex && <process the latex files>)
+
+=head1 Starting all over again
+
+If you wish to re-build perl from the same build directory, you should
+clean it out with the command
+
+ make distclean
+
+or
+
+ make realclean
+
+The only difference between the two is that make distclean also removes
+your old config.sh and Policy.sh files.
+
+If you are upgrading from a previous version of perl, or if you
+change systems or compilers or make other significant changes, or if
+you are experiencing difficulties building perl, you should not re-use
+your old config.sh.
+
+If your reason to reuse your old config.sh is to save your particular
+installation choices, then you can probably achieve the same effect by
+using the Policy.sh file. See the section on L<"Site-wide Policy
+settings"> above.
+
=head1 Reporting Problems
Wherever possible please use the perlbug tool supplied with this Perl
incomplete) list of locally installed modules. Note that you want
perllocal.pod, not perllocale.pod, for installed module information.
-=head1 cd /usr/include; h2ph *.h sys/*.h
-
-Some perl scripts need to be able to obtain information from the
-system header files. This command will convert the most commonly used
-header files in /usr/include into files that can be easily interpreted
-by perl. These files will be placed in the architecture-dependent
-library ($archlib) directory you specified to Configure.
-
-Note: Due to differences in the C and perl languages, the conversion
-of the header files is not perfect. You will probably have to
-hand-edit some of the converted files to get them to parse correctly.
-For example, h2ph breaks spectacularly on type casting and certain
-structures.
-
-=head1 installhtml --help
-
-Some sites may wish to make perl documentation available in HTML
-format. The installhtml utility can be used to convert pod
-documentation into linked HTML files and install them.
-
-Currently, the supplied ./installhtml script does not make use of the
-html Configure variables. This should be fixed in a future release.
-
-The following command-line is an example of one used to convert
-perl documentation:
-
- ./installhtml \
- --podroot=. \
- --podpath=lib:ext:pod:vms \
- --recurse \
- --htmldir=/perl/nmanual \
- --htmlroot=/perl/nmanual \
- --splithead=pod/perlipc \
- --splititem=pod/perlfunc \
- --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \
- --verbose
-
-See the documentation in installhtml for more details. It can take
-many minutes to execute a large installation and you should expect to
-see warnings like "no title", "unexpected directive" and "cannot
-resolve" as the files are processed. We are aware of these problems
-(and would welcome patches for them).
-
-You may find it helpful to run installhtml twice. That should reduce
-the number of "cannot resolve" warnings.
-
-=head1 cd pod && make tex && (process the latex files)
-
-Some sites may also wish to make the documentation in the pod/ directory
-available in TeX format. Type
-
- (cd pod && make tex && <process the latex files>)
-
-=head1 Starting all over again
-
-If you wish to re-build perl from the same build directory, you should
-clean it out with the command
-
- make distclean
-
-or
-
- make realclean
-
-The only difference between the two is that make distclean also removes
-your old config.sh and Policy.sh files.
-
-If you are upgrading from a previous version of perl, or if you
-change systems or compilers or make other significant changes, or if
-you are experiencing difficulties building perl, you should not re-use
-your old config.sh.
-
-If your reason to reuse your old config.sh is to save your particular
-installation choices, then you can probably achieve the same effect by
-using the Policy.sh file. See the section on L<"Site-wide Policy
-settings"> above.
-
=head1 Minimizing the Perl installation
The following section is meant for people worrying about squeezing the
(The 'strace' is Linux-specific, other similar utilities include 'truss'
and 'ktrace'.)
+=head2 C<-DNO_MATHOMS>
+
+If you configure perl with C<-Accflags=-DNO_MATHOMS>, the functions from
+F<mathoms.c> will not be compiled in. Those functions are no longer used
+by perl itself; for source compatibility reasons, though, they weren't
+completely removed.
+
=head1 DOCUMENTATION
Read the manual entries before running perl. The main documentation