# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Sat Nov 13 17:55:50 EET 1999 [metaconfig 3.0 PL70]
+# Generated on Sat Aug 5 00:21:09 EET DST 2000 [metaconfig 3.0 PL70]
# (with additional metaconfig patches by perlbug@perl.com)
cat >/tmp/c1$$ <<EOF
d_bincompat5005=''
byteorder=''
cc=''
-gccversion=''
ccflags=''
cppflags=''
ldflags=''
d_endpent=''
d_endpwent=''
d_endsent=''
-d_endspent=''
d_fchmod=''
d_fchown=''
d_fcntl=''
d_flexfnam=''
d_flock=''
d_fork=''
+d_fpos64_t=''
+d_frexpl=''
d_fs_data_s=''
d_fseeko=''
d_fsetpos=''
d_ftime=''
d_gettimeod=''
d_Gconvert=''
+d_getcwd=''
+d_getespwnam=''
+d_getfsstat=''
d_getgrent=''
d_getgrps=''
d_gethbyaddr=''
d_getpbyname=''
d_getpbynumber=''
d_getprotoprotos=''
+d_getprpwnam=''
d_getpwent=''
d_getsent=''
d_getservprotos=''
-d_getspent=''
d_getspnam=''
d_getsbyname=''
d_getsbyport=''
d_gnulibc=''
d_hasmntopt=''
d_htonl=''
+d_iconv=''
d_inetaton=''
-d_int64t=''
+d_int64_t=''
d_isascii=''
+d_isnan=''
+d_isnanl=''
d_killpg=''
d_lchown=''
d_ldbl_dig=''
longdblsize=''
d_longlong=''
longlongsize=''
+d_lseekproto=''
d_lstat=''
+d_madvise=''
d_mblen=''
d_mbstowcs=''
d_mbtowc=''
d_memmove=''
d_memset=''
d_mkdir=''
+d_mkdtemp=''
d_mkfifo=''
+d_mkstemp=''
+d_mkstemps=''
d_mktime=''
+d_mmap=''
+mmaptype=''
+d_modfl=''
+d_mprotect=''
d_msg=''
d_msgctl=''
d_msgget=''
d_msgrcv=''
d_msgsnd=''
+d_msync=''
+d_munmap=''
d_nice=''
+d_off64_t=''
d_open3=''
d_fpathconf=''
d_pathconf=''
d_pthread_yield=''
d_sched_yield=''
sched_yield=''
+d_qgcvt=''
d_readdir=''
d_rewinddir=''
d_seekdir=''
d_bsdsetpgrp=''
d_setpgrp=''
d_setprior=''
+d_setproctitle=''
d_setpwent=''
d_setregid=''
d_setresgid=''
d_setruid=''
d_setsent=''
d_setsid=''
-d_setspent=''
d_setvbuf=''
d_sfio=''
usesfio=''
d_sockpair=''
sockethdr=''
socketlib=''
+d_socklen_t=''
d_sqrtl=''
d_statblks=''
d_statfs_f_flags=''
d_syserrlst=''
d_strtod=''
d_strtol=''
+d_strtold=''
+d_strtoll=''
d_strtoul=''
+d_strtoull=''
+d_strtouq=''
d_strxfrm=''
d_symlink=''
d_syscall=''
fflushall=''
fpossize=''
fpostype=''
+gccosandvers=''
+gccversion=''
gidformat=''
gidsign=''
gidsize=''
i_gdbm=''
d_grpasswd=''
i_grp=''
+i_iconv=''
+i_ieeefp=''
i_inttypes=''
+i_libutil=''
i_limits=''
i_locale=''
i_machcthr=''
i_niin=''
i_sysin=''
i_poll=''
+i_prot=''
i_pthread=''
d_pwage=''
d_pwchange=''
i_stdlib=''
i_string=''
strings=''
+i_sunmath=''
i_sysaccess=''
i_sysdir=''
i_sysfile=''
i_sysfilio=''
i_sysioctl=''
i_syssockio=''
+i_syslog=''
+i_sysmman=''
+i_sysmode=''
i_sysmount=''
i_sysndir=''
i_sysparam=''
i_systypes=''
i_sysuio=''
i_sysun=''
+i_sysutsname=''
i_sysvfs=''
i_syswait=''
i_sgtty=''
i_varargs=''
i_varhdr=''
i_vfork=''
+inc_version_list=''
+inc_version_list_init=''
installprefix=''
installprefixexp=''
installstyle=''
intsize=''
longsize=''
shortsize=''
-d_fpos64_t=''
-d_off64_t=''
libc=''
ldlibpthname=''
libperl=''
xlibpth=''
ignore_versioned_solibs=''
libs=''
+libsdirs=''
+libsfiles=''
+libsfound=''
+libspath=''
lns=''
d_PRIEldbl=''
d_PRIFldbl=''
passcat=''
orderlib=''
ranlib=''
+d_perl_otherlibdirs=''
+otherlibdirs=''
package=''
spackage=''
pager=''
-apiversion=''
+api_revision=''
+api_subversion=''
+api_version=''
+api_versionstring=''
patchlevel=''
+revision=''
subversion=''
version=''
+perl5=''
perladmin=''
perlpath=''
+d_nv_preserves_uv=''
+d_nv_preserves_uv_bits=''
i16size=''
i16type=''
i32size=''
sitebinexp=''
installsitelib=''
sitelib=''
+sitelib_stem=''
sitelibexp=''
siteprefix=''
siteprefixexp=''
+sizesize=''
sizetype=''
so=''
+socksizetype=''
sharpbang=''
shsharp=''
spitshell=''
stdchar=''
d_stdio_stream_array=''
stdio_stream_array=''
-d_strtoull=''
sysman=''
trnl=''
uidformat=''
uidsize=''
uidtype=''
archname64=''
-use64bits=''
+use64bitall=''
+use64bitint=''
+ccflags_uselargefiles=''
+ldflags_uselargefiles=''
+libswanted_uselargefiles=''
uselargefiles=''
uselongdouble=''
-uselonglong=''
usemorebits=''
usemultiplicity=''
nm_opt=''
useperlio=''
usesocks=''
d_oldpthreads=''
+use5005threads=''
+useithreads=''
usethreads=''
incpath=''
mips_type=''
usrinc=''
+d_vendorarch=''
+installvendorarch=''
+vendorarch=''
+vendorarchexp=''
d_vendorbin=''
installvendorbin=''
vendorbin=''
d_vendorlib=''
installvendorlib=''
vendorlib=''
+vendorlib_stem=''
vendorlibexp=''
usevendorprefix=''
vendorprefix=''
fi
i_whoami=''
+: set useposix=false in your hint file to disable the POSIX extension.
+useposix=true
+: set useopcode=false in your hint file to disable the Opcode extension.
+useopcode=true
+: Trailing extension. Override this in a hint file, if needed.
+_exe=''
+: Extra object files, if any, needed on this platform.
+archobjs=''
: Possible local include directories to search.
: Set locincpth to "" in a hint file to defeat local include searches.
locincpth="/usr/local/include /opt/local/include /usr/gnu/include"
: no include file wanted by default
inclwanted=''
-: list of known cpp symbols, sorted alphabetically
-al="AMIX BIT_MSF BSD BSD4_3 BSD_NET2 CMU CRAY DGUX DOLPHIN DPX2"
-al="$al GO32 GOULD_PN HP700 I386 I80960 I960 Lynx M68000 M68K MACH"
-al="$al MIPSEB MIPSEL MSDOS MTXINU MULTIMAX MVS"
-al="$al M_COFF M_I186 M_I286 M_I386 M_I8086 M_I86 M_I86SM"
-al="$al M_SYS3 M_SYS5 M_SYSIII M_SYSV M_UNIX M_XENIX"
-al="$al NeXT OCS88 OSF1 PARISC PC532 PORTAR POSIX"
-al="$al PWB R3000 RES RISC6000 RT Sun386i SVR3 SVR4 SVR5"
-al="$al SYSTYPE_BSD SYSTYPE_SVR4 SYSTYPE_SYSV Tek4132 Tek4300"
-al="$al UMAXV USGr4 USGr4_2 UTEK UTS UTek UnicomPBB UnicomPBD Utek"
-al="$al VMS Xenix286"
-al="$al _AIX _AIX32 _AIX370 _AIX41 _AM29000 _COFF _CRAY _CX_UX _EPI"
-al="$al _IBMESA _IBMR2 _M88K _M88KBCS_TARGET _POWER"
-al="$al _MIPSEB _MIPSEL _M_COFF _M_I86 _M_I86SM _M_SYS3"
-al="$al _M_SYS5 _M_SYSIII _M_SYSV _M_UNIX _M_XENIX _NLS _PGC_ _R3000"
-al="$al _SYSTYPE_BSD _SYSTYPE_BSD43 _SYSTYPE_SVR4"
-al="$al _SYSTYPE_SYSV _SYSV3 _U370 _UNICOS"
-al="$al __386BSD__ __BIG_ENDIAN __BIG_ENDIAN__ __BSD_4_4__"
-al="$al __DGUX__ __DPX2__ __H3050R __H3050RX"
-al="$al __LITTLE_ENDIAN __LITTLE_ENDIAN__ __MACH__"
-al="$al __MIPSEB __MIPSEB__ __MIPSEL __MIPSEL__"
-al="$al __Next__ __OSF1__ __PARAGON__ __PGC__ __PWB __STDC__"
-al="$al __SVR4_2__ __UMAXV__"
-al="$al ____386BSD____ __alpha __alpha__ __amiga"
-al="$al __bsd4_2 __bsd4_2__ __bsdi__ __convex__"
-al="$al __host_mips__"
-al="$al __hp9000s200 __hp9000s300 __hp9000s400 __hp9000s500"
-al="$al __hp9000s500 __hp9000s700 __hp9000s800"
-al="$al __hppa __hpux __hp_osf __i286 __i286__ __i386 __i386__"
-al="$al __i486 __i486__ __i860 __i860__ __ibmesa __ksr1__ __linux__"
-al="$al __m68k __m68k__ __m88100__ __m88k __m88k__"
-al="$al __mc68000 __mc68000__ __mc68020 __mc68020__"
-al="$al __mc68030 __mc68030__ __mc68040 __mc68040__"
-al="$al __mc88100 __mc88100__ __mips __mips__"
-al="$al __motorola__ __osf__ __pa_risc __sparc__ __stdc__"
-al="$al __sun __sun__ __svr3__ __svr4__ __ultrix __ultrix__"
-al="$al __unix __unix__ __uxpm__ __uxps__ __vax __vax__"
-al="$al _host_mips _mips _unix"
-al="$al a29k aegis aix aixpc alliant alpha am29000 amiga ansi ardent"
-al="$al apollo ardent att386 att3b"
-al="$al bsd bsd43 bsd4_2 bsd4_3 bsd4_4 bsdi bull"
-al="$al cadmus clipper concurrent convex cray ctix"
-al="$al dmert encore gcos gcx gimpel gould"
-al="$al hbullx20 hcx host_mips hp200 hp300 hp700 hp800"
-al="$al hp9000 hp9000s300 hp9000s400 hp9000s500"
-al="$al hp9000s700 hp9000s800 hp9k8 hppa hpux"
-al="$al i186 i286 i386 i486 i8086"
-al="$al i80960 i860 iAPX286 ibm ibm032 ibmrt interdata is68k"
-al="$al ksr1 linux luna luna88k m68k m88100 m88k"
-al="$al mc300 mc500 mc68000 mc68010 mc68020 mc68030"
-al="$al mc68040 mc68060 mc68k mc68k32 mc700"
-al="$al mc88000 mc88100 merlin mert mips mvs n16"
-al="$al ncl_el ncl_mr"
-al="$al news1500 news1700 news1800 news1900 news3700"
-al="$al news700 news800 news900 ns16000 ns32000"
-al="$al ns32016 ns32332 ns32k nsc32000 os osf"
-al="$al parisc pc532 pdp11 plexus posix pyr"
-al="$al riscix riscos scs sequent sgi sinix sony sony_news"
-al="$al sonyrisc sparc sparclite spectrum stardent stratos"
-al="$al sun sun3 sun386 svr4 sysV68 sysV88"
-al="$al titan tower tower32 tower32_200 tower32_600 tower32_700"
-al="$al tower32_800 tower32_850 tss u370 u3b u3b2 u3b20 u3b200"
-al="$al u3b20d u3b5 ultrix unix unixpc unos vax venix vms"
-al="$al xenix z8000"
-
-: Trailing extension. Override this in a hint file, if needed.
-_exe=''
-: Extra object files, if any, needed on this platform.
-archobjs=''
groupstype=''
: change the next line if compiling for Xenix/286 on Xenix/386
xlibpth='/usr/lib/386 /lib/386'
-
: Possible local library directories to search.
loclibpth="/usr/local/lib /opt/local/lib /usr/gnu/lib"
loclibpth="$loclibpth /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib"
: general looking path for locating libraries
-glibpth="/shlib /usr/shlib /lib/pa1.1 /usr/lib/large"
-glibpth="$glibpth /lib /usr/lib $xlibpth"
+glibpth="/usr/lib/large /lib /usr/lib $xlibpth"
glibpth="$glibpth /lib/large /usr/lib/small /lib/small"
glibpth="$glibpth /usr/ccs/lib /usr/ucblib /usr/local/lib"
+test -f /usr/shlib/libc.so && glibpth="/usr/shlib $glibpth"
+test -f /shlib/libc.so && glibpth="/shlib $glibpth"
: Private path used by Configure to find libraries. Its value
: is prepended to libpth. This variable takes care of special
libswanted=''
: some systems want to use only the non-versioned libso:s
ignore_versioned_solibs=''
-: full support for void wanted by default
-defvoidused=15
-
-: set useposix=false in your hint file to disable the POSIX extension.
-useposix=true
-: set useopcode=false in your hint file to disable the Opcode extension.
-useopcode=true
+ccflags_uselargefiles=''
+ldflags_uselargefiles=''
+libswanted_uselargefiles=''
: set usemultiplicity on the Configure command line to enable multiplicity.
: set usesocks on the Configure command line to enable socks.
: set usethreads on the Configure command line to enable threads.
+: full support for void wanted by default
+defvoidused=15
+
: List of libraries we want.
: If anyone needs -lnet, put it in a hint file.
-libswanted='sfio socket inet nsl nm ndbm gdbm dbm db malloc dl'
+libswanted='sfio socket bind inet nsl nm ndbm gdbm dbm db malloc dl'
libswanted="$libswanted dld ld sun m c cposix posix"
libswanted="$libswanted ndir dir crypt sec"
-libswanted="$libswanted ucb bsd BSD PW x"
+libswanted="$libswanted ucb bsd BSD PW x iconv util"
: We probably want to search /usr/shlib before most other libraries.
: This is only used by the lib/ExtUtils/MakeMaker.pm routine extliblist.
glibpth=`echo " $glibpth " | sed -e 's! /usr/shlib ! !'`
echo "$yyy=$zzz" >> posthint.sh ;;
*) echo "$me: unknown -A command '$xxx', ignoring -A $1" >&2 ;;
esac
+ shift
;;
-V) echo "$me generated by metaconfig 3.0 PL70." >&2
exit 0;;
case "$fastread$alldone" in
yescont|yesexit) ;;
*)
- if test ! -t 0; then
- echo "Say 'sh Configure', not 'sh <Configure'"
- exit 1
- fi
+ case "$extractsh" in
+ true) ;;
+ *)
+ if test ! -t 0; then
+ echo "Say 'sh Configure', not 'sh <Configure'"
+ exit 1
+ fi
+ ;;
+ esac
;;
esac
;;
esac
+cat <<EOS >checkcc
+$startsh
+EOS
+cat <<'EOSC' >>checkcc
+case "$cc" in
+'') ;;
+*) $rm -f try try.*
+ $cat >try.c <<EOM
+int main(int argc, char *argv[]) {
+ return 0;
+}
+EOM
+ if $cc -o try try.c; then
+ :
+ else
+ echo "Uh-oh, the C compiler '$cc' doesn't seem to be working." >&4
+ despair=yes
+ trygcc=yes
+ case "$cc" in
+ *gcc*) trygcc=no ;;
+ esac
+ case "`$cc -v -c try.c 2>&1`" in
+ *gcc*) trygcc=no ;;
+ esac
+ if $test X"$trygcc" = Xyes; then
+ if gcc -o try -c try.c; then
+ echo " "
+ echo "You seem to have a working gcc, though." >&4
+ rp="Would you like to use it?"
+ dflt=y
+ if $test -f myread; then
+ . ./myread
+ else
+ if $test -f UU/myread; then
+ . ./UU/myread
+ else
+ echo "Cannot find myread, sorry. Aborting." >&2
+ exit 1
+ fi
+ fi
+ case "$ans" in
+ [yY]*) cc=gcc; ccflags=''; despair=no ;;
+ esac
+ fi
+ fi
+ if $test X"$despair" = Xyes; then
+ echo "You need to find a working C compiler." >&4
+ echo "I cannot continue any further, aborting." >&4
+ exit 1
+ fi
+ fi
+ $rm -f try try.*
+ ;;
+esac
+EOSC
+
: determine whether symbolic links are supported
echo " "
$touch blurfl
: Try to determine whether config.sh was made on this system
case "$config_sh" in
'')
-myuname=`( ($uname -a) 2>/dev/null || hostname) 2>&1`
+myuname=`$uname -a 2>/dev/null`
+$test -z "$myuname" && myuname=`hostname 2>/dev/null`
# tr '[A-Z]' '[a-z]' would not work in EBCDIC
# because the A-Z/a-z are not consecutive.
myuname=`echo $myuname | $sed -e 's/^[^=]*=//' -e 's/\///g' | \
;;
esac
fi
+. ./UU/checkcc
if test ! -f config.sh; then
$cat <<EOM
$test -f /dnix && osname=dnix
$test -f /lynx.os && osname=lynxos
$test -f /unicos && osname=unicos && osvers=`$uname -r`
+ $test -f /unicosmk && osname=unicosmk && osvers=`$uname -r`
$test -f /unicosmk.ar && osname=unicosmk && osvers=`$uname -r`
$test -f /bin/mips && /bin/mips && osname=mips
$test -d /NextApps && set X `hostinfo | grep 'NeXT Mach.*:' | \
osvers="$2.$3"
fi
fi
- $test -f /sys/posix.dll &&
- $test -f /usr/bin/what &&
- set X `/usr/bin/what /sys/posix.dll` &&
- $test "$3" = UWIN &&
- osname=uwin &&
- osvers="$5"
+
+ $test -f /sys/posix.dll &&
+ $test -f /usr/bin/what &&
+ set X `/usr/bin/what /sys/posix.dll` &&
+ $test "$3" = UWIN &&
+ osname=uwin &&
+ osvers="$5"
+
if $test -f $uname; then
set X $myuname
shift
*) osvers=$tmp;;
esac
;;
+ bsd386) osname=bsd386
+ osvers=`$uname -r`
+ ;;
+ cygwin*) osname=cygwin
+ osvers="$3"
+ ;;
*dc.osx) osname=dcosx
osvers="$3"
;;
*) osname=newsos ;;
esac
;;
- bsd386) osname=bsd386
- osvers=`$uname -r`
+ next*) osname=next ;;
+ POSIX-BC | posix-bc ) osname=posix-bc
+ osvers="$3"
;;
- POSIX-BC | posix-bc ) osname=posix-bc
- osvers="$3"
- ;;
powerux | power_ux | powermax_os | powermaxos | \
powerunix | power_unix) osname=powerux
osvers="$3"
;;
- next*) osname=next ;;
+ qnx) osname=qnx
+ osvers="$4"
+ ;;
solaris) osname=solaris
case "$3" in
5*) osvers=`echo $3 | $sed 's/^5/2/g'` ;;
osf1|mls+) case "$5" in
alpha)
osname=dec_osf
- osvers=`echo "$3" | sed 's/^[xvt]//'`
+ osvers=`sizer -v | awk '{print $3}' | tr '[A-Z]' '[a-z]' | sed 's/^[xvt]//'`
+ case "$osvers" in
+ [1-9].[0-9]*) ;;
+ *) osvers=`echo "$3" | sed 's/^[xvt]//'` ;;
+ esac
;;
hp*) osname=hp_osf1 ;;
mips) osname=mips_osf1 ;;
uts) osname=uts
osvers="$3"
;;
- qnx) osname=qnx
- osvers="$4"
- ;;
$2) case "$osname" in
*isc*) ;;
*freebsd*) ;;
: specified already.
case "$hintfile" in
''|' ')
- file=`echo "${osname}_${osvers}" | $sed -e 's@\.@_@g' -e 's@_$@@'`
+ file=`echo "${osname}_${osvers}" | $sed -e 's%\.%_%g' -e 's%_$%%'`
: Also try without trailing minor version numbers.
- xfile=`echo $file | $sed -e 's@_[^_]*$@@'`
- xxfile=`echo $xfile | $sed -e 's@_[^_]*$@@'`
- xxxfile=`echo $xxfile | $sed -e 's@_[^_]*$@@'`
- xxxxfile=`echo $xxxfile | $sed -e 's@_[^_]*$@@'`
+ xfile=`echo $file | $sed -e 's%_[^_]*$%%'`
+ xxfile=`echo $xfile | $sed -e 's%_[^_]*$%%'`
+ xxxfile=`echo $xxfile | $sed -e 's%_[^_]*$%%'`
+ xxxxfile=`echo $xxxfile | $sed -e 's%_[^_]*$%%'`
case "$file" in
'') dflt=none ;;
*) case "$osvers" in
*) eval "$var=$val";;
esac'
+case "$usethreads" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
cat <<EOM
-Perl can be built to take advantage of threads, on some systems.
-To do so, Configure must be run with -Dusethreads.
+Perl can be built to take advantage of threads on some systems.
+To do so, Configure can be run with -Dusethreads.
Note that threading is a highly experimental feature, and
some known race conditions still remain. If you choose to try
it, be very sure to not actually deploy it for production
purposes. README.threads has more details, and is required
reading if you enable threads.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
EOM
-case "$usethreads" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
rp='Build a threading Perl?'
. ./myread
case "$ans" in
-y|Y) val="$define" ;;
+y|Y) val="$define" ;;
*) val="$undef" ;;
esac
set usethreads
-eval $setvar
+eval $setvar
+
+case "$usethreads" in
+$define)
+ $cat <<EOM
+
+As of 5.5.640, Perl has two different internal threading implementations,
+the 5.005 version (5005threads) and an interpreter-based version
+(ithreads) that has one interpreter per thread. Both are very
+experimental. This arrangement exists to help developers work out
+which one is better.
+
+If you're a casual user, you probably don't want interpreter-threads
+at this time. There doesn't yet exist a way to create threads from
+within Perl in this model, i.e., "use Thread;" will NOT work.
+EOM
+ : Default to ithreads unless overridden on command line or with
+ : old config.sh
+ dflt='y'
+ case "$use5005threads" in
+ $define|true|[yY]*) dflt='n';;
+ esac
+ case "$useithreads" in
+ $undef|false|[nN]*) dflt='n';;
+ esac
+ rp='Use interpreter-based ithreads?'
+ . ./myread
+ case "$ans" in
+ y|Y) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ set useithreads
+ eval $setvar
+ : Now set use5005threads to the opposite value.
+ case "$useithreads" in
+ $define) val="$undef" ;;
+ *) val="$define" ;;
+ esac
+ set use5005threads
+ eval $setvar
+ ;;
+*)
+ useithreads="$undef"
+ use5005threads="$undef"
+ ;;
+esac
case "$d_oldpthreads" in
'') : Configure tests would be welcome here. For now, assume undef.
Assuming POSIX threads, then.)
EOM
fi
- ;;
+ ;;
esac
cat <<EOM
Perl can be built so that multiple Perl interpreters can coexist
-within the same Perl executable. To do so, Configure must be run with
--Dusemultiplicity.
-
-Normally you do not need this and you should answer no.
+within the same Perl executable.
+EOM
+case "$useithreads" in
+$define)
+ cat <<EOM
+This multiple interpreter support is required for interpreter-based threads.
EOM
-case "$usemultiplicity" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-rp='Build Perl for multiplicity?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
+ val="$define"
+ ;;
+*) case "$usemultiplicity" in
+ $define|true|[yY]*) dflt='y';;
+ *) dflt='n';;
+ esac
+ echo " "
+ echo "If this doesn't make any sense to you, just accept the default '$dflt'."
+ rp='Build Perl for multiplicity?'
+ . ./myread
+ case "$ans" in
+ y|Y) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ ;;
esac
set usemultiplicity
-eval $setvar
+eval $setvar
: determine where manual pages are on this system
echo " "
#endif
}
EOP
- ( cc -o pdp11 pdp11.c ) >/dev/null 2>&1
+ case "$cc" in
+ '') modelcc="$cc" ;;
+ *) modelcc="cc" ;;
+ esac
+ ( $modelcc -o pdp11 pdp11.c ) >/dev/null 2>&1
if $test -f pdp11 && ./pdp11 2>/dev/null; then
dflt='unsplit split'
else
if $test -f cc.cbu; then
. ./cc.cbu
fi
+. ./checkcc
+
echo " "
echo "Checking for GNU cc in disguise and/or its version number..." >&4
$cat >gccvers.c <<EOM
exit(0);
}
EOM
-if $cc -o gccvers gccvers.c; then
+if $cc $ldflags -o gccvers gccvers.c; then
gccversion=`./gccvers`
case "$gccversion" in
'') echo "You are not using GNU cc." ;;
- *) echo "You are using GNU cc $gccversion." ;;
+ *) echo "You are using GNU cc $gccversion."
+ ;;
esac
else
echo " "
case "$gccversion" in
1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
esac
+case "$gccversion" in
+'') gccosandvers='' ;;
+*) gccshortvers=`echo "$gccversion"|sed 's/ .*//'`
+ gccosandvers=`$cc -v 2>&1|grep '/specs$'|sed "s!.*/[^-/]*-[^-/]*-\([^-/]*\)/$gccshortvers/specs!\1!"`
+ gccshortvers=''
+ case "$gccosandvers" in
+ $osname) gccosandvers='' ;; # linux gccs seem to have no linux osvers, grr
+ $osname$osvers) ;; # looking good
+ $osname*) cat <<EOM >&4
+*** WHOA THERE!!! ***
-case "$usemorebits" in
-"$define"|true|[yY]*)
- use64bits="$define"
- uselongdouble="$define"
- usemorebits="$define"
- ;;
-*) usemorebits="$undef"
- ;;
-esac
-
+ Your gcc has not been compiled for the exact release of
+ your operating system ($gccosandvers versus $osname$osvers).
-cat <<EOM
+ In general it is a good idea to keep gcc synchronized with
+ the operating system because otherwise serious problems
+ may ensue when trying to compile software, like Perl.
-Perl can be built to understand large files (files larger than 2 gigabytes)
-on some systems. To do so, Configure must be run with -Duselargefiles.
+ I'm trying to be optimistic here, though, and will continue.
+ If later during the configuration and build icky compilation
+ problems appear (headerfile conflicts being the most common
+ manifestation), I suggest reinstalling the gcc to match
+ your operating system release.
-If this doesn't make any sense to you, just accept the default.
EOM
-case "$uselargefiles" in
-"$define"|true|[yY]*) dflt='y' ;;
-*) dflt='n' ;;
-esac
-rp='Try to understand large files?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
-esac
-set uselargefiles
-eval $setvar
-case "$uselargefiles" in
-"$define") use64bits="$define" ;;
+ ;;
+ *) gccosandvers='' ;; # failed to parse, better be silent
+ esac
+ ;;
esac
-cat <<EOM
-
-Perl can be built to take advantage of explicit 64-bit interfaces,
-on some systems. To do so, Configure must be run with -Duse64bits.
-
-If this doesn't make any sense to you, just accept the default.
-EOM
-case "$use64bits" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-rp='Try to use explicit 64-bit interfaces, if available?'
-. ./myread
-case "$ans" in
-y|Y)
- val="$define"
- ;;
-*)
- val="$undef"
- ;;
-esac
-set use64bits
-eval $setvar
-case "$archname64" in
-'') archname64='' ;; # not a typo
-esac
-case "$use64bits" in
-"$define"|true|[yY]*)
-: Look for a hint-file generated 'call-back-unit'. If the
-: user has specified that a 64 bit perl is to be built,
-: we may need to set or change some other defaults.
- if $test -f use64bits.cbu; then
- echo "Your platform has some specific hints for 64-bit builds, using them..."
- . ./use64bits.cbu
- else
- $cat <<EOM
-(Your platform doesn't have any specific hints for 64-bit builds.
- This is probably okay, especially if your system is a true 64-bit system.)
-EOM
- case "$gccversion" in
- '') ;;
- *) $cat <<EOM
-But since you seem to be using gcc,
-I will now add -DUSE_LONG_LONG to the compilation flags.
-EOM
- ccflags="$ccflags -DUSE_LONG_LONG"
- ;;
- esac
- fi
- ;;
-esac
-: determine the architecture name
+: see how we invoke the C preprocessor
echo " "
-if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
- tarch=`arch`"-$osname"
-elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
- if uname -m > tmparch 2>&1 ; then
- tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
- -e 's/$/'"-$osname/" tmparch`
+echo "Now, how can we feed standard input to your C preprocessor..." >&4
+cat <<'EOT' >testcpp.c
+#define ABC abc
+#define XYZ xyz
+ABC.XYZ
+EOT
+cd ..
+if test ! -f cppstdin; then
+ if test "X$osname" = "Xaix" -a "X$gccversion" = X; then
+ # AIX cc -E doesn't show the absolute headerfile
+ # locations but we'll cheat by using the -M flag.
+ echo 'cat >.$$.c; rm -f .$$.u; '"$cc"' ${1+"$@"} -M -c .$$.c 2>/dev/null; test -s .$$.u && awk '"'"'$2 ~ /\.h$/ { print "# 0 \""$2"\"" }'"'"' .$$.u; rm -f .$$.o .$$.u; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' > cppstdin
else
- tarch="$osname"
+ echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
fi
- $rm -f tmparch
else
- tarch="$osname"
+ echo "Keeping your $hint cppstdin wrapper."
fi
-case "$myarchname" in
-''|"$tarch") ;;
-*)
- echo "(Your architecture name used to be $myarchname.)"
- archname=''
- ;;
-esac
-myarchname="$tarch"
-case "$archname" in
-'') dflt="$tarch";;
-*) dflt="$archname";;
-esac
-rp='What is your architecture name'
-. ./myread
-archname="$ans"
-case "$usethreads" in
-$define)
- echo "Threads selected." >&4
- case "$archname" in
- *-thread*) echo "...and architecture name already has -thread." >&4
- ;;
- *) archname="$archname-thread"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
-esac
-case "$usemultiplicity" in
-$define)
- echo "Multiplicity selected." >&4
- case "$archname" in
- *-multi*) echo "...and architecture name already has -multi." >&4
- ;;
- *) archname="$archname-multi"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
-esac
-case "$use64bits" in
-$define)
- echo "Explicit 64-bitness selected." >&4
- case "$archname64" in
- '')
+chmod 755 cppstdin
+wrapper=`pwd`/cppstdin
+ok='false'
+cd UU
+
+if $test "X$cppstdin" != "X" && \
+ $cppstdin $cppminus <testcpp.c >testcpp.out 2>&1 && \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+then
+ echo "You used to use $cppstdin $cppminus so we'll use that again."
+ case "$cpprun" in
+ '') echo "But let's see if we can live without a wrapper..." ;;
+ *)
+ if $cpprun $cpplast <testcpp.c >testcpp.out 2>&1 && \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+ then
+ echo "(And we'll use $cpprun $cpplast to preprocess directly.)"
+ ok='true'
+ else
+ echo "(However, $cpprun $cpplast does not work, let's see...)"
+ fi
;;
+ esac
+else
+ case "$cppstdin" in
+ '') ;;
*)
- case "$archname" in
- *-$archname64*) echo "...and architecture name already has $archname64." >&4
- ;;
- *) archname="$archname-$archname64"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
+ echo "Good old $cppstdin $cppminus does not seem to be of any help..."
+ ;;
+ esac
+fi
+
+if $ok; then
+ : nothing
+elif echo 'Maybe "'"$cc"' -E" will work...'; \
+ $cc -E <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yup, it does."
+ x_cpp="$cc -E"
+ x_minus='';
+elif echo 'Nope...maybe "'"$cc"' -E -" will work...'; \
+ $cc -E - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yup, it does."
+ x_cpp="$cc -E"
+ x_minus='-';
+elif echo 'Nope...maybe "'"$cc"' -P" will work...'; \
+ $cc -P <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yipee, that works!"
+ x_cpp="$cc -P"
+ x_minus='';
+elif echo 'Nope...maybe "'"$cc"' -P -" will work...'; \
+ $cc -P - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "At long last!"
+ x_cpp="$cc -P"
+ x_minus='-';
+elif echo 'No such luck, maybe "'$cpp'" will work...'; \
+ $cpp <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "It works!"
+ x_cpp="$cpp"
+ x_minus='';
+elif echo 'Nixed again...maybe "'$cpp' -" will work...'; \
+ $cpp - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Hooray, it works! I was beginning to wonder."
+ x_cpp="$cpp"
+ x_minus='-';
+elif echo 'Uh-uh. Time to get fancy. Trying a wrapper...'; \
+ $wrapper <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ x_cpp="$wrapper"
+ x_minus=''
+ echo "Eureka!"
+else
+ dflt=''
+ rp="No dice. I can't find a C preprocessor. Name one:"
+ . ./myread
+ x_cpp="$ans"
+ x_minus=''
+ $x_cpp <testcpp.c >testcpp.out 2>&1
+ if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "OK, that will do." >&4
+ else
+echo "Sorry, I can't get that to work. Go find one and rerun Configure." >&4
+ exit 1
+ fi
+fi
+
+case "$ok" in
+false)
+ cppstdin="$x_cpp"
+ cppminus="$x_minus"
+ cpprun="$x_cpp"
+ cpplast="$x_minus"
+ set X $x_cpp
+ shift
+ case "$1" in
+ "$cpp")
+ echo "Perhaps can we force $cc -E using a wrapper..."
+ if $wrapper <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+ then
+ echo "Yup, we can."
+ cppstdin="$wrapper"
+ cppminus='';
+ else
+ echo "Nope, we'll have to live without it..."
+ fi
+ ;;
+ esac
+ case "$cpprun" in
+ "$wrapper")
+ cpprun=''
+ cpplast=''
;;
esac
+ ;;
+esac
+
+case "$cppstdin" in
+"$wrapper"|'cppstdin') ;;
+*) $rm -f $wrapper;;
esac
+$rm -f testcpp.c testcpp.out
: decide how portable to be. Allow command line overrides.
case "$d_portable" in
true)
case "$ansexp" in
/*) value="$ansexp" ;;
+ [a-zA-Z]:/*) value="$ansexp" ;;
*)
redo=true
case "$already" in
Directory)
for fp in $gfpth; do
if test "X$fp" = X.; then
- pf="$ansexp"
+ dir="$ans"
+ direxp="$ansexp"
else
- pf="$fp/$ansexp"
+ dir="$fp/$ansexp"
+ direxp="$fp/$ansexp"
fi
- if test -d "$pf"; then
+ if test -d "$direxp"; then
type=''
- value="$pf"
+ value="$dir"
break
fi
done
test "X$gfpthkeep" != Xy && gfpth=""
EOSC
-: determine root of directory hierarchy where package will be installed.
-case "$prefix" in
-'')
- dflt=`./loc . /usr/local /usr/local /local /opt /usr`
+: What should the include directory be ?
+echo " "
+$echo $n "Hmm... $c"
+dflt='/usr/include'
+incpath=''
+mips_type=''
+if $test -f /bin/mips && /bin/mips; then
+ echo "Looks like a MIPS system..."
+ $cat >usr.c <<'EOCP'
+#ifdef SYSTYPE_BSD43
+/bsd43
+#endif
+EOCP
+ if cc -E usr.c > usr.out && $contains / usr.out >/dev/null 2>&1; then
+ dflt='/bsd43/usr/include'
+ incpath='/bsd43'
+ mips_type='BSD 4.3'
+ else
+ mips_type='System V'
+ fi
+ $rm -f usr.c usr.out
+ echo "and you're compiling with the $mips_type compiler and libraries."
+ xxx_prompt=y
+ echo "exit 0" >mips
+else
+ echo "Doesn't look like a MIPS system."
+ xxx_prompt=n
+ echo "exit 1" >mips
+fi
+chmod +x mips
+$eunicefix mips
+case "$usrinc" in
+'') ;;
+*) dflt="$usrinc";;
+esac
+case "$xxx_prompt" in
+y) fn=d/
+ echo " "
+ rp='Where are the include files you want to use?'
+ . ./getfile
+ usrinc="$ans"
;;
-*)
- dflt="$prefix"
+*) usrinc="$dflt"
;;
esac
-$cat <<EOM
-By default, $package will be installed in $dflt/bin, manual pages
-under $dflt/man, etc..., i.e. with $dflt as prefix for all
-installation directories. Typically this is something like /usr/local.
-If you wish to have binaries under /usr/bin but other parts of the
-installation under /usr/local, that's ok: you will be prompted
-separately for each of the installation directories, the prefix being
-only used to set the defaults.
+: Set private lib path
+case "$plibpth" in
+'') if ./mips; then
+ plibpth="$incpath/usr/lib /usr/local/lib /usr/ccs/lib"
+ fi;;
+esac
+case "$libpth" in
+' ') dlist='';;
+'') dlist="$loclibpth $plibpth $glibpth";;
+*) dlist="$libpth";;
+esac
+
+: Now check and see which directories actually exist, avoiding duplicates
+libpth=''
+for xxx in $dlist
+do
+ if $test -d $xxx; then
+ case " $libpth " in
+ *" $xxx "*) ;;
+ *) libpth="$libpth $xxx";;
+ esac
+ fi
+done
+$cat <<'EOM'
+
+Some systems have incompatible or broken versions of libraries. Among
+the directories listed in the question below, please remove any you
+know not to be holding relevant libraries, and add any that are needed.
+Say "none" for none.
EOM
-fn=d~
-rp='Installation prefix to use?'
-. ./getfile
-oldprefix=''
-case "$prefix" in
-'') ;;
+case "$libpth" in
+'') dflt='none';;
*)
- case "$ans" in
- "$prefix") ;;
- *) oldprefix="$prefix";;
- esac
+ set X $libpth
+ shift
+ dflt=${1+"$@"}
;;
esac
-prefix="$ans"
-prefixexp="$ansexp"
-
-: is AFS running?
-echo " "
-case "$afs" in
-$define|true) afs=true ;;
-$undef|false) afs=false ;;
-*) if test -d /afs; then
- afs=true
- else
- afs=false
- fi
- ;;
+rp="Directories to use for library searches?"
+. ./myread
+case "$ans" in
+none) libpth=' ';;
+*) libpth="$ans";;
esac
-if $afs; then
- echo "AFS may be running... I'll be extra cautious then..." >&4
-else
- echo "AFS does not seem to be running..." >&4
-fi
-: determine installation prefix for where package is to be installed.
-if $afs; then
+: compute shared library extension
+case "$so" in
+'')
+ if xxx=`./loc libc.sl X $libpth`; $test -f "$xxx"; then
+ dflt='sl'
+ else
+ dflt='so'
+ fi
+ ;;
+*) dflt="$so";;
+esac
$cat <<EOM
-Since you are running AFS, I need to distinguish the directory in which
-files will reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
+On some systems, shared libraries may be available. Answer 'none' if
+you want to suppress searching of shared libraries for the remainder
+of this configuration.
EOM
- case "$installprefix" in
- '') dflt=`echo $prefix | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installprefix";;
- esac
-else
-$cat <<EOM
-
-In some special cases, particularly when building $package for distribution,
-it is convenient to distinguish between the directory in which files should
-be installed from the directory ($prefix) in which they
-will eventually reside. For most users, these two directories are the same.
+rp='What is the file extension used for shared libraries?'
+. ./myread
+so="$ans"
-EOM
- case "$installprefix" in
- '') dflt=$prefix ;;
- *) dflt=$installprefix;;
+: Define several unixisms.
+: Hints files or command line option can be used to override them.
+: The convoluted testing is in case hints files set either the old
+: or the new name.
+case "$_exe" in
+'') case "$exe_ext" in
+ '') ;;
+ *) _exe="$exe_ext" ;;
esac
-fi
-fn=d~
-rp='What installation prefix should I use for installing files?'
-. ./getfile
-installprefix="$ans"
-installprefixexp="$ansexp"
-
-: set the prefixit variable, to compute a suitable default value
-prefixit='case "$3" in
-""|none)
- case "$oldprefix" in
- "") eval "$1=\"\$$2\"";;
- *)
- case "$3" in
- "") eval "$1=";;
- none)
- eval "tp=\"\$$2\"";
- case "$tp" in
- ""|" ") eval "$1=\"\$$2\"";;
- *) eval "$1=";;
- esac;;
- esac;;
- esac;;
-*)
- eval "tp=\"$oldprefix-\$$2-\""; eval "tp=\"$tp\"";
- case "$tp" in
- --|/*--|\~*--) eval "$1=\"$prefix/$3\"";;
- /*-$oldprefix/*|\~*-$oldprefix/*)
- eval "$1=\`echo \$$2 | sed \"s,^$oldprefix,$prefix,\"\`";;
- *) eval "$1=\"\$$2\"";;
- esac;;
-esac'
+ ;;
+esac
+case "$_a" in
+'') case "$lib_ext" in
+ '') _a='.a';;
+ *) _a="$lib_ext" ;;
+ esac
+ ;;
+esac
+case "$_o" in
+'') case "$obj_ext" in
+ '') _o='.o';;
+ *) _o="$obj_ext";;
+ esac
+ ;;
+esac
+case "$p_" in
+'') case "$path_sep" in
+ '') p_=':';;
+ *) p_="$path_sep";;
+ esac
+ ;;
+esac
+exe_ext=$_exe
+lib_ext=$_a
+obj_ext=$_o
+path_sep=$p_
-: set the base revision
-baserev=5.0
+: Which makefile gets called first. This is used by make depend.
+case "$firstmakefile" in
+'') firstmakefile='makefile';;
+esac
-: get the patchlevel
-echo " "
-echo "Getting the current patchlevel..." >&4
-if $test -r $rsrc/patchlevel.h;then
- patchlevel=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
- subversion=`awk '/define[ ]+PERL_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
- apiversion=`awk '/define[ ]+PERL_APIVERSION/ {print $3}' $rsrc/patchlevel.h`
-else
- patchlevel=0
- subversion=0
- apiversion=0
-fi
-$echo $n "(You have $package" $c
-case "$package" in
-"*$baserev") ;;
-*) $echo $n " $baserev" $c ;;
+case "$usesocks" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
esac
-$echo $n " patchlevel $patchlevel" $c
-test 0 -eq "$subversion" || $echo $n " subversion $subversion" $c
-echo ".)"
+cat <<EOM
-if test 0 -eq "$subversion"; then
- version=`LC_ALL=C; export LC_ALL; \
- echo $baserev $patchlevel | \
- $awk '{ printf "%.3f\n", $1 + $2/1000.0 }'`
-else
- version=`LC_ALL=C; export LC_ALL; \
- echo $baserev $patchlevel $subversion | \
- $awk '{ printf "%.5f\n", $1 + $2/1000.0 + $3/100000.0 }'`
-fi
+Perl can be built to use the SOCKS proxy protocol library. To do so,
+Configure must be run with -Dusesocks.
-: determine installation style
-: For now, try to deduce it from prefix unless it is already set.
-: Reproduce behavior of 5.005 and earlier, maybe drop that in 5.7.
-case "$installstyle" in
-'') case "$prefix" in
- *perl*) dflt='lib';;
- *) dflt='lib/perl5' ;;
- esac
- ;;
-*) dflt='lib/perl5' ;;
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Build Perl for SOCKS?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
esac
-: Probably not worth prompting for this since we prompt for all
-: the directories individually, and the prompt would be too long and
-: confusing anyway.
-installstyle=$dflt
+set usesocks
+eval $setvar
-: determine where private library files go
-: Usual default is /usr/local/lib/perl5/$version.
-: Also allow things like /opt/perl/lib/$version, since
-: /opt/perl/lib/perl5... would be redundant.
-: The default "style" setting is made in installstyle.U
-case "$installstyle" in
-*lib/perl5*) set dflt privlib lib/$package/$version ;;
-*) set dflt privlib lib/$version ;;
+: Looking for optional libraries
+echo " "
+echo "Checking for optional libraries..." >&4
+case "$libs" in
+' '|'') dflt='';;
+*) dflt="$libs";;
+esac
+case "$libswanted" in
+'') libswanted='c_s';;
+esac
+case "$usesocks" in
+"$define") libswanted="$libswanted socks5 socks5_sh" ;;
+esac
+libsfound=''
+libsfiles=''
+libsdirs=''
+libspath=''
+for thisdir in $libpth $xlibpth; do
+ test -d $thisdir && libspath="$libspath $thisdir"
+done
+for thislib in $libswanted; do
+ for thisdir in $libspath; do
+ xxx=''
+ if $test ! -f "$xxx" -a "X$ignore_versioned_solibs" = "X"; then
+ xxx=`ls $thisdir/lib$thislib.$so.[0-9] 2>/dev/null|tail -1`
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=shared
+ fi
+ if test ! -f "$xxx"; then
+ xxx=$thisdir/lib$thislib.$so
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=shared
+ fi
+ if test ! -f "$xxx"; then
+ xxx=$thisdir/lib$thislib$_a
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=static
+ fi
+ if test ! -f "$xxx"; then
+ xxx=$thisdir/$thislib$_a
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=static
+ fi
+ if test ! -f "$xxx"; then
+ xxx=$thisdir/lib${thislib}_s$_a
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=static
+ $test -f "$xxx" && thislib=${thislib}_s
+ fi
+ if test ! -f "$xxx"; then
+ xxx=$thisdir/Slib$thislib$_a
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=static
+ fi
+ if $test -f "$xxx"; then
+ case "$libstyle" in
+ shared) echo "Found -l$thislib (shared)." ;;
+ static) echo "Found -l$thislib." ;;
+ *) echo "Found -l$thislib ($libstyle)." ;;
+ esac
+ case " $dflt " in
+ *"-l$thislib "*);;
+ *) dflt="$dflt -l$thislib"
+ libsfound="$libsfound $xxx"
+ yyy=`basename $xxx`
+ libsfiles="$libsfiles $yyy"
+ yyy=`echo $xxx|$sed -e "s%/$yyy\\$%%"`
+ case " $libsdirs " in
+ *" $yyy "*) ;;
+ *) libsdirs="$libsdirs $yyy" ;;
+ esac
+ ;;
+ esac
+ break
+ fi
+ done
+ if $test ! -f "$xxx"; then
+ echo "No -l$thislib."
+ fi
+done
+set X $dflt
+shift
+dflt="$*"
+case "$libs" in
+'') dflt="$dflt";;
+*) dflt="$libs";;
+esac
+case "$dflt" in
+' '|'') dflt='none';;
esac
-eval $prefixit
-$cat <<EOM
-There are some auxiliary files for $package that need to be put into a
-private library directory that is accessible by everyone.
+$cat <<EOM
+In order to compile $package on your machine, a number of libraries
+are usually needed. Include any other special libraries here as well.
+Say "none" for none. The default list is almost always right.
EOM
-fn=d~+
-rp='Pathname where the private library files will reside?'
-. ./getfile
-privlib="$ans"
-privlibexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installprivlib=`echo $privlibexp | sed "s#^$prefix#$installprefix#"`
-else
- installprivlib="$privlibexp"
-fi
-
-: set the prefixup variable, to restore leading tilda escape
-prefixup='case "$prefixexp" in
-"$prefix") ;;
-*) eval "$1=\`echo \$$1 | sed \"s,^$prefixexp,$prefix,\"\`";;
-esac'
-: determine where public architecture dependent libraries go
-set archlib archlib
-eval $prefixit
-: privlib default is /usr/local/lib/$package/$version
-: archlib default is /usr/local/lib/$package/$version/$archname
-: privlib may have an optional trailing /share.
-tdflt=`echo $privlib | $sed 's,/share$,,'`
-tdflt=$tdflt/$archname
-case "$archlib" in
-'') dflt=$tdflt
- ;;
-*) dflt="$archlib"
- ;;
+echo " "
+rp="What libraries to use?"
+. ./myread
+case "$ans" in
+none) libs=' ';;
+*) libs="$ans";;
esac
-$cat <<EOM
-$spackage contains architecture-dependent library files. If you are
-sharing libraries in a heterogeneous environment, you might store
-these files in a separate location. Otherwise, you can just include
-them with the rest of the public library files.
+: determine optimization, if desired, or use for debug flag also
+case "$optimize" in
+' '|$undef) dflt='none';;
+'') dflt='-O';;
+*) dflt="$optimize";;
+esac
+$cat <<EOH
-EOM
-fn=d+~
-rp='Where do you want to put the public architecture-dependent libraries?'
-. ./getfile
-archlib="$ans"
-archlibexp="$ansexp"
-if $test X"$archlib" = X"$privlib"; then
- d_archlib="$undef"
-else
- d_archlib="$define"
-fi
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installarchlib=`echo $archlibexp | sed "s#^$prefix#$installprefix#"`
-else
- installarchlib="$archlibexp"
-fi
-
-
-: Binary compatibility with 5.005 is not possible for builds
-: with advanced features
-case "$usethreads$usemultiplicity" in
-*define*)
- bincompat5005="$undef"
- d_bincompat5005="$undef"
- ;;
-*) $cat <<EOM
+By default, $package compiles with the -O flag to use the optimizer.
+Alternately, you might want to use the symbolic debugger, which uses
+the -g flag (on traditional Unix systems). Either flag can be
+specified here. To use neither flag, specify the word "none".
-Perl 5.006 can be compiled for binary compatibility with 5.005.
-If you decide to do so, you will be able to continue using most
-of the extensions that were compiled for Perl 5.005.
+EOH
+rp="What optimizer/debugger flag should be used?"
+. ./myread
+optimize="$ans"
+case "$optimize" in
+'none') optimize=" ";;
+esac
-EOM
- case "$bincompat5005$d_bincompat5005" in
- *"$undef"*) dflt=n ;;
- *) dflt=y ;;
+dflt=''
+: We will not override a previous value, but we might want to
+: augment a hint file
+case "$hint" in
+default|recommended)
+ case "$gccversion" in
+ 1*) dflt='-fpcc-struct-return' ;;
esac
- rp='Binary compatibility with Perl 5.005?'
- . ./myread
- case "$ans" in
- y*) val="$define" ;;
- *) val="$undef" ;;
+ case "$optimize" in
+ *-g*) dflt="$dflt -DDEBUGGING";;
esac
- set d_bincompat5005
- eval $setvar
- case "$d_bincompat5005" in
- "$define")
- bincompat5005="$define"
+ case "$gccversion" in
+ 2*) if test -d /etc/conf/kconfig.d &&
+ $contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
+ then
+ dflt="$dflt -posix"
+ fi
;;
- *) bincompat5005="$undef"
- d_bincompat5005="$undef"
+ esac
+ case "$gccversion" in
+ 1*) ;;
+ 2.[0-8]*) ;;
+ ?*) echo " "
+ echo "Checking if your compiler accepts -fno-strict-aliasing" 2>&1
+ echo 'int main(void) { return 0; }' > gcctest.c
+ if $cc -O2 -fno-strict-aliasing -o gcctest gcctest.c; then
+ echo "Yes, it does." 2>&1
+ case "$ccflags" in
+ *strict-aliasing*)
+ echo "Leaving current flags $ccflags alone." 2>&1
+ ;;
+ *) dflt="$dflt -fno-strict-aliasing" ;;
+ esac
+ else
+ echo "Nope, it doesn't, but that's ok." 2>&1
+ fi
;;
esac
;;
esac
+case "$mips_type" in
+*BSD*|'') inclwanted="$locincpth $usrinc";;
+*) inclwanted="$locincpth $inclwanted $usrinc/bsd";;
+esac
+for thisincl in $inclwanted; do
+ if $test -d $thisincl; then
+ if $test x$thisincl != x$usrinc; then
+ case "$dflt" in
+ *$thisincl*);;
+ *) dflt="$dflt -I$thisincl";;
+ esac
+ fi
+ fi
+done
-: see if setuid scripts can be secure
-$cat <<EOM
+inctest='if $contains $2 $usrinc/$1 >/dev/null 2>&1; then
+ xxx=true;
+elif $contains $2 $usrinc/sys/$1 >/dev/null 2>&1; then
+ xxx=true;
+else
+ xxx=false;
+fi;
+if $xxx; then
+ case "$dflt" in
+ *$2*);;
+ *) dflt="$dflt -D$2";;
+ esac;
+fi'
-Some kernels have a bug that prevents setuid #! scripts from being
-secure. Some sites have disabled setuid #! scripts because of this.
+set signal.h LANGUAGE_C; eval $inctest
-First let's decide if your kernel supports secure setuid #! scripts.
-(If setuid #! scripts would be secure but have been disabled anyway,
-don't say that they are secure if asked.)
+case "$usesocks" in
+$define)
+ ccflags="$ccflags -DSOCKS"
+ ;;
+esac
-EOM
+case "$hint" in
+default|recommended) dflt="$ccflags $dflt" ;;
+*) dflt="$ccflags";;
+esac
-val="$undef"
-if $test -d /dev/fd; then
- echo "#!$ls" >reflect
- chmod +x,u+s reflect
- ./reflect >flect 2>&1
- if $contains "/dev/fd" flect >/dev/null; then
- echo "Congratulations, your kernel has secure setuid scripts!" >&4
- val="$define"
- else
- $cat <<EOM
-If you are not sure if they are secure, I can check but I'll need a
-username and password different from the one you are using right now.
-If you don't have such a username or don't want me to test, simply
-enter 'none'.
+case "$dflt" in
+''|' ') dflt=none;;
+esac
+$cat <<EOH
-EOM
- rp='Other username to test security of setuid scripts with?'
- dflt='none'
- . ./myread
- case "$ans" in
- n|none)
- case "$d_suidsafe" in
- '') echo "I'll assume setuid scripts are *not* secure." >&4
- dflt=n;;
- "$undef")
- echo "Well, the $hint value is *not* secure." >&4
- dflt=n;;
- *) echo "Well, the $hint value *is* secure." >&4
- dflt=y;;
- esac
- ;;
- *)
- $rm -f reflect flect
- echo "#!$ls" >reflect
- chmod +x,u+s reflect
- echo >flect
- chmod a+w flect
- echo '"su" will (probably) prompt you for '"$ans's password."
- su $ans -c './reflect >flect'
- if $contains "/dev/fd" flect >/dev/null; then
- echo "Okay, it looks like setuid scripts are secure." >&4
- dflt=y
- else
- echo "I don't think setuid scripts are secure." >&4
- dflt=n
- fi
- ;;
- esac
- rp='Does your kernel have *secure* setuid scripts?'
- . ./myread
- case "$ans" in
- [yY]*) val="$define";;
- *) val="$undef";;
- esac
- fi
-else
- echo "I don't think setuid scripts are secure (no /dev/fd directory)." >&4
- echo "(That's for file descriptors, not floppy disks.)"
- val="$undef"
-fi
-set d_suidsafe
-eval $setvar
+Your C compiler may want other flags. For this question you should include
+-I/whatever and -DWHATEVER flags and any other flags used by the C compiler,
+but you should NOT include libraries or ld flags like -lwhatever. If you
+want $package to honor its debug switch, you should include -DDEBUGGING here.
+Your C compiler might also need additional flags, such as -D_POSIX_SOURCE.
-$rm -f reflect flect
+To use no flags, specify the word "none".
-: now see if they want to do setuid emulation
-echo " "
-val="$undef"
-case "$d_suidsafe" in
-"$define")
- val="$undef"
- echo "No need to emulate SUID scripts since they are secure here." >& 4
- ;;
+EOH
+set X $dflt
+shift
+dflt=${1+"$@"}
+rp="Any additional cc flags?"
+. ./myread
+case "$ans" in
+none) ccflags='';;
+*) ccflags="$ans";;
+esac
+
+: the following weeds options from ccflags that are of no interest to cpp
+cppflags="$ccflags"
+case "$gccversion" in
+1*) cppflags="$cppflags -D__GNUC__"
+esac
+case "$mips_type" in
+'');;
+*BSD*) cppflags="$cppflags -DSYSTYPE_BSD43";;
+esac
+case "$cppflags" in
+'');;
*)
- $cat <<EOM
-Some systems have disabled setuid scripts, especially systems where
-setuid scripts cannot be secure. On systems where setuid scripts have
-been disabled, the setuid/setgid bits on scripts are currently
-useless. It is possible for $package to detect those bits and emulate
-setuid/setgid in a secure fashion. This emulation will only work if
-setuid scripts have been disabled in your kernel.
+ echo " "
+ echo "Let me guess what the preprocessor flags are..." >&4
+ set X $cppflags
+ shift
+ cppflags=''
+ $cat >cpp.c <<'EOM'
+#define BLURFL foo
+BLURFL xx LFRULB
EOM
- case "$d_dosuid" in
- "$define") dflt=y ;;
- *) dflt=n ;;
- esac
- rp="Do you want to do setuid/setgid emulation?"
- . ./myread
- case "$ans" in
- [yY]*) val="$define";;
- *) val="$undef";;
+ previous=''
+ for flag in $*
+ do
+ case "$flag" in
+ -*) ftry="$flag";;
+ *) ftry="$previous $flag";;
+ esac
+ if $cppstdin -DLFRULB=bar $cppflags $ftry $cppminus <cpp.c \
+ >cpp1.out 2>/dev/null && \
+ $cpprun -DLFRULB=bar $cppflags $ftry $cpplast <cpp.c \
+ >cpp2.out 2>/dev/null && \
+ $contains 'foo.*xx.*bar' cpp1.out >/dev/null 2>&1 && \
+ $contains 'foo.*xx.*bar' cpp2.out >/dev/null 2>&1
+ then
+ cppflags="$cppflags $ftry"
+ previous=''
+ else
+ previous="$flag"
+ fi
+ done
+ set X $cppflags
+ shift
+ cppflags=${1+"$@"}
+ case "$cppflags" in
+ *-*) echo "They appear to be: $cppflags";;
esac
+ $rm -f cpp.c cpp?.out
;;
esac
-set d_dosuid
-eval $setvar
-: What should the include directory be ?
-echo " "
-$echo $n "Hmm... $c"
-dflt='/usr/include'
-incpath=''
-mips_type=''
-if $test -f /bin/mips && /bin/mips; then
- echo "Looks like a MIPS system..."
- $cat >usr.c <<'EOCP'
-#ifdef SYSTYPE_BSD43
-/bsd43
-#endif
-EOCP
- if $cc -E usr.c > usr.out && $contains / usr.out >/dev/null 2>&1; then
- dflt='/bsd43/usr/include'
- incpath='/bsd43'
- mips_type='BSD 4.3'
+: flags used in final linking phase
+case "$ldflags" in
+'') if ./venix; then
+ dflt='-i -z'
else
- mips_type='System V'
+ dflt=''
fi
- $rm -f usr.c usr.out
- echo "and you're compiling with the $mips_type compiler and libraries."
- xxx_prompt=y
- echo "exit 0" >mips
-else
- echo "Doesn't look like a MIPS system."
- xxx_prompt=n
- echo "exit 1" >mips
-fi
-chmod +x mips
-$eunicefix mips
-case "$usrinc" in
-'') ;;
-*) dflt="$usrinc";;
-esac
-case "$xxx_prompt" in
-y) fn=d/
- echo " "
- rp='Where are the include files you want to use?'
- . ./getfile
- usrinc="$ans"
- ;;
-*) usrinc="$dflt"
+ case "$ccflags" in
+ *-posix*) dflt="$dflt -posix" ;;
+ esac
;;
+*) dflt="$ldflags";;
esac
-: see how we invoke the C preprocessor
+: Try to guess additional flags to pick up local libraries.
+for thislibdir in $libpth; do
+ case " $loclibpth " in
+ *" $thislibdir "*)
+ case "$dflt " in
+ *"-L$thislibdir "*) ;;
+ *) dflt="$dflt -L$thislibdir" ;;
+ esac
+ ;;
+ esac
+done
+
+case "$dflt" in
+'') dflt='none' ;;
+esac
+
+$cat <<EOH
+
+Your C linker may need flags. For this question you should
+include -L/whatever and any other flags used by the C linker, but you
+should NOT include libraries like -lwhatever.
+
+Make sure you include the appropriate -L/path flags if your C linker
+does not normally search all of the directories you specified above,
+namely
+ $libpth
+To use no flags, specify the word "none".
+
+EOH
+
+rp="Any additional ld flags (NOT including libraries)?"
+. ./myread
+case "$ans" in
+none) ldflags='';;
+*) ldflags="$ans";;
+esac
+rmlist="$rmlist pdp11"
+
+: coherency check
echo " "
-echo "Now, how can we feed standard input to your C preprocessor..." >&4
-cat <<'EOT' >testcpp.c
-#define ABC abc
-#define XYZ xyz
-ABC.XYZ
-EOT
-cd ..
-if test ! -f cppstdin; then
- if test "X$osname" = "Xaix" -a "X$gccversion" = X; then
- # AIX cc -E doesn't show the absolute headerfile
- # locations but we'll cheat by using the -M flag.
- echo 'cat >.$$.c; rm -f .$$.u; '"$cc"' ${1+"$@"} -M -c .$$.c 2>/dev/null; test -s .$$.u && awk '"'"'$2 ~ /\.h$/ { print "# 0 \""$2"\"" }'"'"' .$$.u; rm -f .$$.o .$$.u; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' > cppstdin
+echo "Checking your choice of C compiler and flags for coherency..." >&4
+$cat > try.c <<'EOF'
+#include <stdio.h>
+int main() { printf("Ok\n"); exit(0); }
+EOF
+set X $cc $optimize $ccflags -o try $ldflags try.c $libs
+shift
+$cat >try.msg <<'EOM'
+I've tried to compile and run the following simple program:
+
+EOM
+$cat try.c >> try.msg
+
+$cat >> try.msg <<EOM
+
+I used the command:
+
+ $*
+ ./try
+
+and I got the following output:
+
+EOM
+dflt=y
+if sh -c "$cc $optimize $ccflags -o try $ldflags try.c $libs" >>try.msg 2>&1; then
+ if sh -c './try' >>try.msg 2>&1; then
+ xxx=`./try`
+ case "$xxx" in
+ "Ok") dflt=n ;;
+ *) echo 'The program compiled OK, but produced no output.' >> try.msg
+ case " $libs " in
+ *" -lsfio "*)
+ cat >> try.msg <<'EOQS'
+If $libs contains -lsfio, and sfio is mis-configured, then it
+sometimes (apparently) runs and exits with a 0 status, but with no
+output! It may have to do with sfio's use of _exit vs. exit.
+
+EOQS
+ rp="You have a big problem. Shall I abort Configure"
+ dflt=y
+ ;;
+ esac
+ ;;
+ esac
else
- echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
+ echo "The program compiled OK, but exited with status $?." >>try.msg
+ rp="You have a problem. Shall I abort Configure"
+ dflt=y
fi
else
- echo "Keeping your $hint cppstdin wrapper."
+ echo "I can't compile the test program." >>try.msg
+ rp="You have a BIG problem. Shall I abort Configure"
+ dflt=y
fi
-chmod 755 cppstdin
-wrapper=`pwd`/cppstdin
-ok='false'
-cd UU
-
-if $test "X$cppstdin" != "X" && \
- $cppstdin $cppminus <testcpp.c >testcpp.out 2>&1 && \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
-then
- echo "You used to use $cppstdin $cppminus so we'll use that again."
- case "$cpprun" in
- '') echo "But let's see if we can live without a wrapper..." ;;
- *)
- if $cpprun $cpplast <testcpp.c >testcpp.out 2>&1 && \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
- then
- echo "(And we'll use $cpprun $cpplast to preprocess directly.)"
- ok='true'
- else
- echo "(However, $cpprun $cpplast does not work, let's see...)"
- fi
+case "$dflt" in
+y)
+ $cat try.msg >&4
+ case "$knowitall" in
+ '')
+ echo "(The supplied flags or libraries might be incorrect.)"
;;
+ *) dflt=n;;
esac
-else
- case "$cppstdin" in
- '') ;;
- *)
- echo "Good old $cppstdin $cppminus does not seem to be of any help..."
+ echo " "
+ . ./myread
+ case "$ans" in
+ n*|N*) ;;
+ *) echo "Ok. Stopping Configure." >&4
+ exit 1
;;
esac
-fi
+ ;;
+n) echo "OK, that should do.";;
+esac
+$rm -f try try.* core
-if $ok; then
- : nothing
-elif echo 'Maybe "'"$cc"' -E" will work...'; \
- $cc -E <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yup, it does."
- x_cpp="$cc -E"
- x_minus='';
-elif echo 'Nope...maybe "'"$cc"' -E -" will work...'; \
- $cc -E - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yup, it does."
- x_cpp="$cc -E"
- x_minus='-';
-elif echo 'Nope...maybe "'"$cc"' -P" will work...'; \
- $cc -P <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yipee, that works!"
- x_cpp="$cc -P"
- x_minus='';
-elif echo 'Nope...maybe "'"$cc"' -P -" will work...'; \
- $cc -P - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "At long last!"
- x_cpp="$cc -P"
- x_minus='-';
-elif echo 'No such luck, maybe "'$cpp'" will work...'; \
- $cpp <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "It works!"
- x_cpp="$cpp"
- x_minus='';
-elif echo 'Nixed again...maybe "'$cpp' -" will work...'; \
- $cpp - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Hooray, it works! I was beginning to wonder."
- x_cpp="$cpp"
- x_minus='-';
-elif echo 'Uh-uh. Time to get fancy. Trying a wrapper...'; \
- $wrapper <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- x_cpp="$wrapper"
- x_minus=''
- echo "Eureka!"
-else
- dflt=''
- rp="No dice. I can't find a C preprocessor. Name one:"
- . ./myread
- x_cpp="$ans"
- x_minus=''
- $x_cpp <testcpp.c >testcpp.out 2>&1
- if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "OK, that will do." >&4
+: define an is-a-typedef? function
+typedef='type=$1; var=$2; def=$3; shift; shift; shift; inclist=$@;
+case "$inclist" in
+"") inclist="sys/types.h";;
+esac;
+eval "varval=\$$var";
+case "$varval" in
+"")
+ $rm -f temp.c;
+ for inc in $inclist; do
+ echo "#include <$inc>" >>temp.c;
+ done;
+ echo "#ifdef $type" >> temp.c;
+ echo "printf(\"We have $type\");" >> temp.c;
+ echo "#endif" >> temp.c;
+ $cppstdin $cppflags $cppminus < temp.c >temp.E 2>/dev/null;
+ if $contains $type temp.E >/dev/null 2>&1; then
+ eval "$var=\$type";
else
-echo "Sorry, I can't get that to work. Go find one and rerun Configure." >&4
- exit 1
+ eval "$var=\$def";
+ fi;
+ $rm -f temp.?;;
+*) eval "$var=\$varval";;
+esac'
+
+: define an is-a-typedef? function that prompts if the type is not available.
+typedef_ask='type=$1; var=$2; def=$3; shift; shift; shift; inclist=$@;
+case "$inclist" in
+"") inclist="sys/types.h";;
+esac;
+eval "varval=\$$var";
+case "$varval" in
+"")
+ $rm -f temp.c;
+ for inc in $inclist; do
+ echo "#include <$inc>" >>temp.c;
+ done;
+ echo "#ifdef $type" >> temp.c;
+ echo "printf(\"We have $type\");" >> temp.c;
+ echo "#endif" >> temp.c;
+ $cppstdin $cppflags $cppminus < temp.c >temp.E 2>/dev/null;
+ echo " " ;
+ echo "$rp" | $sed -e "s/What is/Looking for/" -e "s/?/./";
+ if $contains $type temp.E >/dev/null 2>&1; then
+ echo "$type found." >&4;
+ eval "$var=\$type";
+ else
+ echo "$type NOT found." >&4;
+ dflt="$def";
+ . ./myread ;
+ eval "$var=\$ans";
+ fi;
+ $rm -f temp.?;;
+*) eval "$var=\$varval";;
+esac'
+
+: define a shorthand compile call
+compile='
+mc_file=$1;
+shift;
+$cc $optimize $ccflags $ldflags -o ${mc_file} $* ${mc_file}.c $libs > /dev/null 2>&1;'
+: define a shorthand compile call for compilations that should be ok.
+compile_ok='
+mc_file=$1;
+shift;
+$cc $optimize $ccflags $ldflags -o ${mc_file} $* ${mc_file}.c $libs;'
+
+: check for lengths of integral types
+echo " "
+case "$intsize" in
+'')
+ echo "Checking to see how big your integers are..." >&4
+ $cat >intsize.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("intsize=%d;\n", (int)sizeof(int));
+ printf("longsize=%d;\n", (int)sizeof(long));
+ printf("shortsize=%d;\n", (int)sizeof(short));
+ exit(0);
+}
+EOCP
+ set intsize
+ if eval $compile_ok && ./intsize > /dev/null; then
+ eval `./intsize`
+ echo "Your integers are $intsize bytes long."
+ echo "Your long integers are $longsize bytes long."
+ echo "Your short integers are $shortsize bytes long."
+ else
+ $cat >&4 <<EOM
+!
+Help! I can't compile and run the intsize test program: please enlighten me!
+(This is probably a misconfiguration in your system or libraries, and
+you really ought to fix it. Still, I'll try anyway.)
+!
+EOM
+ dflt=4
+ rp="What is the size of an integer (in bytes)?"
+ . ./myread
+ intsize="$ans"
+ dflt=$intsize
+ rp="What is the size of a long integer (in bytes)?"
+ . ./myread
+ longsize="$ans"
+ dflt=2
+ rp="What is the size of a short integer (in bytes)?"
+ . ./myread
+ shortsize="$ans"
fi
-fi
+ ;;
+esac
+$rm -f intsize intsize.*
-case "$ok" in
-false)
- cppstdin="$x_cpp"
- cppminus="$x_minus"
- cpprun="$x_cpp"
- cpplast="$x_minus"
- set X $x_cpp
- shift
- case "$1" in
- "$cpp")
- echo "Perhaps can we force $cc -E using a wrapper..."
- if $wrapper <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
- then
- echo "Yup, we can."
- cppstdin="$wrapper"
- cppminus='';
- else
- echo "Nope, we'll have to live without it..."
- fi
+: see what type lseek is declared as in the kernel
+rp="What is the type used for lseek's offset on this system?"
+set off_t lseektype long stdio.h sys/types.h
+eval $typedef_ask
+
+echo " "
+echo "Checking to see how big your file offsets are..." >&4
+$cat >try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", (int)sizeof($lseektype));
+ return(0);
+}
+EOCP
+set try
+if eval $compile_ok; then
+ lseeksize=`./try`
+ echo "Your file offsets are $lseeksize bytes long."
+else
+ dflt=$longsize
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of your file offsets (in bytes)?"
+ . ./myread
+ lseeksize="$ans"
+fi
+$rm -f try.c try
+
+: see what type file positions are declared as in the library
+rp="What is the type for file position used by fsetpos()?"
+set fpos_t fpostype long stdio.h sys/types.h
+eval $typedef_ask
+
+echo " "
+case "$fpostype" in
+*_t) zzz="$fpostype" ;;
+*) zzz="fpos_t" ;;
+esac
+echo "Checking the size of $zzz..." >&4
+cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ printf("%d\n", (int)sizeof($fpostype));
+ exit(0);
+}
+EOCP
+set try
+if eval $compile_ok; then
+ yyy=`./try`
+ case "$yyy" in
+ '') fpossize=4
+ echo "(I can't execute the test program--guessing $fpossize.)" >&4
;;
- esac
- case "$cpprun" in
- "$wrapper")
- cpprun=''
- cpplast=''
+ *) fpossize=$yyy
+ echo "Your $zzz is $fpossize bytes long."
;;
esac
- ;;
-esac
-
-case "$cppstdin" in
-"$wrapper"|'cppstdin') ;;
-*) $rm -f $wrapper;;
-esac
-$rm -f testcpp.c testcpp.out
+else
+ dflt="$longsize"
+ echo " " >&4
+ echo "(I can't compile the test program. Guessing...)" >&4
+ rp="What is the size of your file positions (in bytes)?"
+ . ./myread
+ fpossize="$ans"
+fi
-: Set private lib path
-case "$plibpth" in
-'') if ./mips; then
- plibpth="$incpath/usr/lib /usr/local/lib /usr/ccs/lib"
- fi;;
-esac
-case "$libpth" in
-' ') dlist='';;
-'') dlist="$loclibpth $plibpth $glibpth";;
-*) dlist="$libpth";;
-esac
-: Now check and see which directories actually exist, avoiding duplicates
-libpth=''
-for xxx in $dlist
-do
- if $test -d $xxx; then
- case " $libpth " in
- *" $xxx "*) ;;
- *) libpth="$libpth $xxx";;
- esac
- fi
-done
-$cat <<'EOM'
-Some systems have incompatible or broken versions of libraries. Among
-the directories listed in the question below, please remove any you
-know not to be holding relevant libraries, and add any that are needed.
-Say "none" for none.
+# Backward compatibility (uselfs is deprecated).
+case "$uselfs" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+*** Configure -Duselfs is deprecated, using -Duselargefiles instead.
EOM
-case "$libpth" in
-'') dflt='none';;
-*)
- set X $libpth
- shift
- dflt=${1+"$@"}
- ;;
-esac
-rp="Directories to use for library searches?"
-. ./myread
-case "$ans" in
-none) libpth=' ';;
-*) libpth="$ans";;
-esac
-
-: compute shared library extension
-case "$so" in
-'')
- if xxx=`./loc libc.sl X $libpth`; $test -f "$xxx"; then
- dflt='sl'
- else
- dflt='so'
- fi
+ uselargefiles="$define"
;;
-*) dflt="$so";;
-esac
-$cat <<EOM
+esac
-On some systems, shared libraries may be available. Answer 'none' if
-you want to suppress searching of shared libraries for the remaining
-of this configuration.
+case "$lseeksize:$fpossize" in
+8:8) cat <<EOM
+You can have files larger than 2 gigabytes.
EOM
-rp='What is the file extension used for shared libraries?'
-. ./myread
-so="$ans"
+ val="$define" ;;
+*) case "$uselargefiles" in
+ "$undef"|false|[nN]*) dflt='n' ;;
+ *) dflt='y' ;;
+ esac
+ cat <<EOM
-: Define several unixisms.
-: Hints files or command line option can be used to override them.
-: The convoluted testing is in case hints files set either the old
-: or the new name.
-case "$_exe" in
-'') case "$exe_ext" in
- '') ;;
- *) _exe="$exe_ext" ;;
- esac
- ;;
+Perl can be built to understand large files (files larger than 2 gigabytes)
+on some systems. To do so, Configure can be run with -Duselargefiles.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+ rp='Try to understand large files, if available?'
+ . ./myread
+ case "$ans" in
+ y|Y) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ ;;
esac
-case "$_a" in
-'') case "$lib_ext" in
- '') _a='.a';;
- *) _a="$lib_ext" ;;
- esac
+set uselargefiles
+eval $setvar
+case "$uselargefiles" in
+"$define")
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that a large files perl is to be built,
+: we may need to set or change some other defaults.
+ if $test -f uselargefiles.cbu; then
+ echo "Your platform has some specific hints for large file builds, using them..."
+ . ./uselargefiles.cbu
+ echo " "
+ echo "Rechecking to see how big your file offsets are..." >&4
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", (int)sizeof($lseektype));
+ return(0);
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ lseeksize=`./try`
+ $echo "Your file offsets are now $lseeksize bytes long."
+ else
+ dflt="$lseeksize"
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of your file offsets (in bytes)?"
+ . ./myread
+ lseeksize="$ans"
+ fi
+ case "$fpostype" in
+ *_t) zzz="$fpostype" ;;
+ *) zzz="fpos_t" ;;
+ esac
+ $echo $n "Rechecking the size of $zzz...$c" >&4
+ $cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ printf("%d\n", (int)sizeof($fpostype));
+ exit(0);
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ yyy=`./try`
+ dflt="$lseeksize"
+ case "$yyy" in
+ '') echo " "
+ echo "(I can't execute the test program--guessing $fpossize.)" >&4
+ ;;
+ *) fpossize=$yyy
+ echo " $fpossize bytes." >&4
+ ;;
+ esac
+ else
+ dflt="$fpossize"
+ echo " "
+ echo "(I can't compile the test program. Guessing...)" >&4
+ rp="What is the size of your file positions (in bytes)?"
+ . ./myread
+ fpossize="$ans"
+ fi
+ $rm -f try.c try
+ fi
;;
esac
-case "$_o" in
-'') case "$obj_ext" in
- '') _o='.o';;
- *) _o="$obj_ext";;
- esac
+
+
+case "$usemorebits" in
+"$define"|true|[yY]*)
+ use64bitint="$define"
+ uselongdouble="$define"
+ usemorebits="$define"
;;
-esac
-case "$p_" in
-'') case "$path_sep" in
- '') p_=':';;
- *) p_="$path_sep";;
- esac
+*) usemorebits="$undef"
;;
esac
-exe_ext=$_exe
-lib_ext=$_a
-obj_ext=$_o
-path_sep=$p_
-
-: Which makefile gets called first. This is used by make depend.
-case "$firstmakefile" in
-'') firstmakefile='makefile';;
-esac
-
-cat <<EOM
-
-Perl can be built to use the SOCKS proxy protocol library. To do so,
-Configure must be run with -Dusesocks.
-Normally you do not need this and you should answer no.
-
-EOM
-case "$usesocks" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-rp='Build Perl for SOCKS?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
-esac
-set usesocks
-eval $setvar
-: Looking for optional libraries
-echo " "
-echo "Checking for optional libraries..." >&4
-case "$libs" in
-' '|'') dflt='';;
-*) dflt="$libs";;
-esac
-case "$libswanted" in
-'') libswanted='c_s';;
-esac
-case "$usesocks" in
-$define)
- libswanted="$libswanted socks5 socks5_sh"
- ;;
-esac
-for thislib in $libswanted; do
-
- if xxx=`./loc lib$thislib.$so.[0-9]'*' X $libpth`;
- $test -f "$xxx" -a "X$ignore_versioned_solibs" = "X"; then
- echo "Found -l$thislib (shared)."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
- elif xxx=`./loc lib$thislib.$so X $libpth` ; $test -f "$xxx"; then
- echo "Found -l$thislib (shared)."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
- elif xxx=`./loc lib$thislib$_a X $libpth`; $test -f "$xxx"; then
- echo "Found -l$thislib."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
- elif xxx=`./loc $thislib$_a X $libpth`; $test -f "$xxx"; then
- echo "Found -l$thislib."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
- elif xxx=`./loc lib${thislib}_s$_a X $libpth`; $test -f "$xxx"; then
- echo "Found -l${thislib}_s."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l${thislib}_s";;
- esac
- elif xxx=`./loc Slib$thislib$_a X $xlibpth`; $test -f "$xxx"; then
- echo "Found -l$thislib."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
- else
- echo "No -l$thislib."
- fi
-done
-set X $dflt
-shift
-dflt="$*"
-case "$libs" in
-'') dflt="$dflt";;
-*) dflt="$libs";;
+case "$uselonglong" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** Configure -Duselonglong is deprecated, using -Duse64bitint instead.
+EOM
+ use64bitint="$define"
+ ;;
+esac
+case "$use64bits" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** Configure -Duse64bits is deprecated, using -Duse64bitint instead.
+EOM
+ use64bitint="$define"
+ ;;
+esac
+case "$use64bitints" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** There is no Configure -Duse64bitints, using -Duse64bitint instead.
+EOM
+ use64bitint="$define"
+ ;;
+esac
+case "$use64bitsint" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** There is no Configure -Duse64bitsint, using -Duse64bitint instead.
+EOM
+ use64bitint="$define"
+ ;;
+esac
+case "$uselonglongs" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** There is no Configure -Duselonglongs, using -Duse64bitint instead.
+EOM
+ use64bitint="$define"
+ ;;
+esac
+case "$use64bitsall" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** There is no Configure -Duse64bitsall, using -Duse64bitall instead.
+EOM
+ use64bitall="$define"
+ ;;
+esac
+
+case "$ccflags" in
+*-DUSE_LONG_LONG*|*-DUSE_64_BIT_INT*|*-DUSE_64_BIT_ALL*) use64bitint="$define";;
esac
-case "$dflt" in
-' '|'') dflt='none';;
+case "$use64bitall" in
+"$define"|true|[yY]*) use64bitint="$define" ;;
esac
-$cat <<EOM
+case "$longsize" in
+8) cat <<EOM
-In order to compile $package on your machine, a number of libraries
-are usually needed. Include any other special libraries here as well.
-Say "none" for none. The default list is almost always right.
+You have natively 64-bit long integers.
EOM
+ val="$define"
+ ;;
+*) case "$use64bitint" in
+ "$define"|true|[yY]*) dflt='y';;
+ *) dflt='n';;
+ esac
+ cat <<EOM
-echo " "
-rp="What libraries to use?"
-. ./myread
-case "$ans" in
-none) libs=' ';;
-*) libs="$ans";;
-esac
+Perl can be built to take advantage of 64-bit integer types
+on some systems. To do so, Configure can be run with -Duse64bitint.
+Choosing this option will most probably introduce binary incompatibilities.
-: determine optimization, if desired, or use for debug flag also
-case "$optimize" in
-' '|$undef) dflt='none';;
-'') dflt='-O';;
-*) dflt="$optimize";;
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+ rp='Try to use 64-bit integers, if available?'
+ . ./myread
+ case "$ans" in
+ [yY]*) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ ;;
esac
-$cat <<EOH
+set use64bitint
+eval $setvar
-By default, $package compiles with the -O flag to use the optimizer.
-Alternately, you might want to use the symbolic debugger, which uses
-the -g flag (on traditional Unix systems). Either flag can be
-specified here. To use neither flag, specify the word "none".
+case "$use64bitall" in
+"$define"|true|[yY]*) dflt='y' ;;
+*) case "$longsize" in
+ 8) dflt='y' ;;
+ *) dflt='n' ;;
+ esac
+ ;;
+esac
+cat <<EOM
-EOH
-rp="What optimizer/debugger flag should be used?"
+You may also choose to try maximal 64-bitness. It means using as much
+64-bitness as possible on the platform. This in turn means even more
+binary incompatibilities. On the other hand, your platform may not
+have any more 64-bitness available than what you already have chosen.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Try to use maximal 64-bit support, if available?'
. ./myread
-optimize="$ans"
-case "$optimize" in
-'none') optimize=" ";;
+case "$ans" in
+[yY]*) val="$define" ;;
+*) val="$undef" ;;
esac
+set use64bitall
+eval $setvar
+case "$use64bitall" in
+"$define")
+ case "$use64bitint" in
+ "$undef")
+ cat <<EOM
-dflt=''
-: We will not override a previous value, but we might want to
-: augment a hint file
-case "$hint" in
-default|recommended)
- case "$gccversion" in
- 1*) dflt='-fpcc-struct-return' ;;
- esac
- case "$optimize" in
- *-g*) dflt="$dflt -DDEBUGGING";;
- esac
- case "$gccversion" in
- 2*) if test -d /etc/conf/kconfig.d &&
- $contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- then
- dflt="$dflt -posix"
- fi
- ;;
- esac
- case "$gccversion" in
- 1*) ;;
- 2.[0-8]*) ;;
- ?*) echo " "
- echo "Checking if your compiler accepts -fno-strict-aliasing" 2>&1
- echo 'int main(void) { return 0; }' > gcctest.c
- if $cc -O2 -fno-strict-aliasing -o gcctest gcctest.c; then
- echo "Yes, it does." 2>&1
- case "$ccflags" in
- *strict-aliasing*)
- echo "Leaving current flags $ccflags alone." 2>&1
- ;;
- *) dflt="$dflt -fno-strict-aliasing" ;;
- esac
- else
- echo "Nope, it doesn't, but that's ok." 2>&1
- fi
- ;;
+Since you have chosen a maximally 64-bit build, I'm also turning on
+the use of 64-bit integers.
+EOM
+ use64bitint="$define" ;;
esac
;;
esac
-case "$mips_type" in
-*BSD*|'') inclwanted="$locincpth $usrinc";;
-*) inclwanted="$locincpth $inclwanted $usrinc/bsd";;
+case "$use64bitint" in
+"$define"|true|[yY]*)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that a 64-bit perl is to be built,
+: we may need to set or change some other defaults.
+ if $test -f use64bitint.cbu; then
+ echo "Your platform has some specific hints for 64-bit integers, using them..."
+ . ./use64bitint.cbu
+ fi
+ case "$longsize" in
+ 4) case "$archname64" in
+ '') archname64=64int ;;
+ esac
+ ;;
+ esac
+ ;;
esac
-for thisincl in $inclwanted; do
- if $test -d $thisincl; then
- if $test x$thisincl != x$usrinc; then
- case "$dflt" in
- *$thisincl*);;
- *) dflt="$dflt -I$thisincl";;
- esac
- fi
+
+case "$use64bitall" in
+"$define"|true|[yY]*)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that a maximally 64-bit perl is to be built,
+: we may need to set or change some other defaults.
+ if $test -f use64bitall.cbu; then
+ echo "Your platform has some specific hints for 64-bit builds, using them..."
+ . ./use64bitall.cbu
fi
-done
+ case "$longsize" in
+ 4) case "$archname64" in
+ ''|64int) archname64=64all ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
-inctest='if $contains $2 $usrinc/$1 >/dev/null 2>&1; then
- xxx=true;
-elif $contains $2 $usrinc/sys/$1 >/dev/null 2>&1; then
- xxx=true;
+: determine the architecture name
+echo " "
+if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
+ tarch=`arch`"-$osname"
+elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
+ if uname -m > tmparch 2>&1 ; then
+ tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
+ -e 's/$/'"-$osname/" tmparch`
+ else
+ tarch="$osname"
+ fi
+ $rm -f tmparch
else
- xxx=false;
-fi;
-if $xxx; then
- case "$dflt" in
- *$2*);;
- *) dflt="$dflt -D$2";;
- esac;
-fi'
-
-set signal.h LANGUAGE_C; eval $inctest
-
-case "$usesocks" in
+ tarch="$osname"
+fi
+case "$myarchname" in
+''|"$tarch") ;;
+*)
+ echo "(Your architecture name used to be $myarchname.)"
+ archname=''
+ ;;
+esac
+myarchname="$tarch"
+case "$archname" in
+'') dflt="$tarch";;
+*) dflt="$archname";;
+esac
+rp='What is your architecture name'
+. ./myread
+archname="$ans"
+case "$usethreads" in
$define)
- ccflags="$ccflags -DSOCKS"
+ echo "Threads selected." >&4
+ case "$archname" in
+ *-thread*) echo "...and architecture name already has -thread." >&4
+ ;;
+ *) archname="$archname-thread"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+esac
+case "$usemultiplicity" in
+$define)
+ echo "Multiplicity selected." >&4
+ case "$archname" in
+ *-multi*) echo "...and architecture name already has -multi." >&4
+ ;;
+ *) archname="$archname-multi"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
;;
esac
+case "$use64bitint" in
+$define)
+ case "$archname64" in
+ '')
+ ;;
+ *)
+ case "$archname" in
+ *-$archname64*) echo "...and architecture name already has $archname64." >&4
+ ;;
+ *) archname="$archname-$archname64"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+ esac
+esac
-case "$hint" in
-default|recommended) dflt="$ccflags $dflt" ;;
-*) dflt="$ccflags";;
+: determine root of directory hierarchy where package will be installed.
+case "$prefix" in
+'')
+ dflt=`./loc . /usr/local /usr/local /local /opt /usr`
+ ;;
+*)
+ dflt="$prefix"
+ ;;
+esac
+$cat <<EOM
+
+By default, $package will be installed in $dflt/bin, manual pages
+under $dflt/man, etc..., i.e. with $dflt as prefix for all
+installation directories. Typically this is something like /usr/local.
+If you wish to have binaries under /usr/bin but other parts of the
+installation under /usr/local, that's ok: you will be prompted
+separately for each of the installation directories, the prefix being
+only used to set the defaults.
+
+EOM
+fn=d~
+rp='Installation prefix to use?'
+. ./getfile
+oldprefix=''
+case "$prefix" in
+'') ;;
+*)
+ case "$ans" in
+ "$prefix") ;;
+ *) oldprefix="$prefix";;
+ esac
+ ;;
esac
+prefix="$ans"
+prefixexp="$ansexp"
-case "$dflt" in
-''|' ') dflt=none;;
+: is AFS running?
+echo " "
+case "$afs" in
+$define|true) afs=true ;;
+$undef|false) afs=false ;;
+*) if test -d /afs; then
+ afs=true
+ else
+ afs=false
+ fi
+ ;;
esac
-$cat <<EOH
+if $afs; then
+ echo "AFS may be running... I'll be extra cautious then..." >&4
+else
+ echo "AFS does not seem to be running..." >&4
+fi
-Your C compiler may want other flags. For this question you should include
--I/whatever and -DWHATEVER flags and any other flags used by the C compiler,
-but you should NOT include libraries or ld flags like -lwhatever. If you
-want $package to honor its debug switch, you should include -DDEBUGGING here.
-Your C compiler might also need additional flags, such as -D_POSIX_SOURCE.
+: determine installation prefix for where package is to be installed.
+if $afs; then
+$cat <<EOM
-To use no flags, specify the word "none".
+Since you are running AFS, I need to distinguish the directory in which
+files will reside from the directory in which they are installed (and from
+which they are presumably copied to the former directory by occult means).
-EOH
-set X $dflt
-shift
-dflt=${1+"$@"}
-rp="Any additional cc flags?"
-. ./myread
-case "$ans" in
-none) ccflags='';;
-*) ccflags="$ans";;
-esac
+EOM
+ case "$installprefix" in
+ '') dflt=`echo $prefix | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installprefix";;
+ esac
+else
+$cat <<EOM
-: the following weeds options from ccflags that are of no interest to cpp
-cppflags="$ccflags"
-case "$gccversion" in
-1*) cppflags="$cppflags -D__GNUC__"
-esac
-case "$mips_type" in
-'');;
-*BSD*) cppflags="$cppflags -DSYSTYPE_BSD43";;
-esac
-case "$cppflags" in
-'');;
-*)
- echo " "
- echo "Let me guess what the preprocessor flags are..." >&4
- set X $cppflags
- shift
- cppflags=''
- $cat >cpp.c <<'EOM'
-#define BLURFL foo
+In some special cases, particularly when building $package for distribution,
+it is convenient to distinguish between the directory in which files should
+be installed from the directory ($prefix) in which they
+will eventually reside. For most users, these two directories are the same.
-BLURFL xx LFRULB
EOM
- previous=''
- for flag in $*
- do
- case "$flag" in
- -*) ftry="$flag";;
- *) ftry="$previous $flag";;
- esac
- if $cppstdin -DLFRULB=bar $cppflags $ftry $cppminus <cpp.c \
- >cpp1.out 2>/dev/null && \
- $cpprun -DLFRULB=bar $cppflags $ftry $cpplast <cpp.c \
- >cpp2.out 2>/dev/null && \
- $contains 'foo.*xx.*bar' cpp1.out >/dev/null 2>&1 && \
- $contains 'foo.*xx.*bar' cpp2.out >/dev/null 2>&1
- then
- cppflags="$cppflags $ftry"
- previous=''
- else
- previous="$flag"
- fi
- done
- set X $cppflags
- shift
- cppflags=${1+"$@"}
- case "$cppflags" in
- *-*) echo "They appear to be: $cppflags";;
+ case "$installprefix" in
+ '') dflt=$prefix ;;
+ *) dflt=$installprefix;;
esac
- $rm -f cpp.c cpp?.out
+fi
+fn=d~
+rp='What installation prefix should I use for installing files?'
+. ./getfile
+installprefix="$ans"
+installprefixexp="$ansexp"
+
+: set the prefixit variable, to compute a suitable default value
+prefixit='case "$3" in
+""|none)
+ case "$oldprefix" in
+ "") eval "$1=\"\$$2\"";;
+ *)
+ case "$3" in
+ "") eval "$1=";;
+ none)
+ eval "tp=\"\$$2\"";
+ case "$tp" in
+ ""|" ") eval "$1=\"\$$2\"";;
+ *) eval "$1=";;
+ esac;;
+ esac;;
+ esac;;
+*)
+ eval "tp=\"$oldprefix-\$$2-\""; eval "tp=\"$tp\"";
+ case "$tp" in
+ --|/*--|\~*--) eval "$1=\"$prefix/$3\"";;
+ /*-$oldprefix/*|\~*-$oldprefix/*)
+ eval "$1=\`echo \$$2 | sed \"s,^$oldprefix,$prefix,\"\`";;
+ *) eval "$1=\"\$$2\"";;
+ esac;;
+esac'
+
+
+: get the patchlevel
+echo " "
+echo "Getting the current patchlevel..." >&4
+if $test -r $rsrc/patchlevel.h;then
+ revision=`awk '/define[ ]+PERL_REVISION/ {print $3}' $rsrc/patchlevel.h`
+ patchlevel=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
+ subversion=`awk '/define[ ]+PERL_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
+ api_revision=`awk '/define[ ]+PERL_API_REVISION/ {print $3}' $rsrc/patchlevel.h`
+ api_version=`awk '/define[ ]+PERL_API_VERSION/ {print $3}' $rsrc/patchlevel.h`
+ api_subversion=`awk '/define[ ]+PERL_API_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
+else
+ revision=0
+ patchlevel=0
+ subversion=0
+ api_revision=0
+ api_version=0
+ api_subversion=0
+fi
+$echo $n "(You have $package revision $revision" $c
+$echo $n " patchlevel $patchlevel" $c
+test 0 -eq "$subversion" || $echo $n " subversion $subversion" $c
+echo ".)"
+case "$osname" in
+dos|vms)
+ : XXX Should be a Configure test for double-dots in filenames.
+ version=`echo $revision $patchlevel $subversion | \
+ $awk '{ printf "%d_%d_%d\n", $1, $2, $3 }'`
+ api_versionstring=`echo $api_revision $api_version $api_subversion | \
+ $awk '{ printf "%d_%d_%d\n", $1, $2, $3 }'`
+ ;;
+*)
+ version=`echo $revision $patchlevel $subversion | \
+ $awk '{ printf "%d.%d.%d\n", $1, $2, $3 }'`
+ api_versionstring=`echo $api_revision $api_version $api_subversion | \
+ $awk '{ printf "%d.%d.%d\n", $1, $2, $3 }'`
;;
esac
+: Special case the 5.005_xx maintenance series, which used 5.005
+: without any subversion label as a subdirectory in $sitelib
+if test "${api_revision}${api_version}${api_subversion}" = "550"; then
+ api_versionstring='5.005'
+fi
-: flags used in final linking phase
-case "$ldflags" in
-'') if ./venix; then
- dflt='-i -z'
- else
- dflt=''
- fi
- case "$ccflags" in
- *-posix*) dflt="$dflt -posix" ;;
+: determine installation style
+: For now, try to deduce it from prefix unless it is already set.
+: Reproduce behavior of 5.005 and earlier, maybe drop that in 5.7.
+case "$installstyle" in
+'') case "$prefix" in
+ *perl*) dflt='lib';;
+ *) dflt='lib/perl5' ;;
esac
;;
-*) dflt="$ldflags";;
+*) dflt="$installstyle" ;;
esac
+: Probably not worth prompting for this since we prompt for all
+: the directories individually, and the prompt would be too long and
+: confusing anyway.
+installstyle=$dflt
-: Try to guess additional flags to pick up local libraries.
-for thislibdir in $libpth; do
- case " $loclibpth " in
- *" $thislibdir "*)
- case "$dflt " in
- *"-L$thislibdir "*) ;;
- *) dflt="$dflt -L$thislibdir" ;;
- esac
- ;;
- esac
-done
+: determine where private library files go
+: Usual default is /usr/local/lib/perl5/$version.
+: Also allow things like /opt/perl/lib/$version, since
+: /opt/perl/lib/perl5... would be redundant.
+: The default "style" setting is made in installstyle.U
+case "$installstyle" in
+*lib/perl5*) set dflt privlib lib/$package/$version ;;
+*) set dflt privlib lib/$version ;;
+esac
+eval $prefixit
+$cat <<EOM
-case "$dflt" in
-'') dflt='none' ;;
+There are some auxiliary files for $package that need to be put into a
+private library directory that is accessible by everyone.
+
+EOM
+fn=d~+
+rp='Pathname where the private library files will reside?'
+. ./getfile
+privlib="$ans"
+privlibexp="$ansexp"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installprivlib=`echo $privlibexp | sed "s#^$prefix#$installprefix#"`
+else
+ installprivlib="$privlibexp"
+fi
+
+: set the prefixup variable, to restore leading tilda escape
+prefixup='case "$prefixexp" in
+"$prefix") ;;
+*) eval "$1=\`echo \$$1 | sed \"s,^$prefixexp,$prefix,\"\`";;
+esac'
+
+: determine where public architecture dependent libraries go
+set archlib archlib
+eval $prefixit
+: privlib default is /usr/local/lib/$package/$version
+: archlib default is /usr/local/lib/$package/$version/$archname
+: privlib may have an optional trailing /share.
+tdflt=`echo $privlib | $sed 's,/share$,,'`
+tdflt=$tdflt/$archname
+case "$archlib" in
+'') dflt=$tdflt
+ ;;
+*) dflt="$archlib"
+ ;;
esac
+$cat <<EOM
-$cat <<EOH
+$spackage contains architecture-dependent library files. If you are
+sharing libraries in a heterogeneous environment, you might store
+these files in a separate location. Otherwise, you can just include
+them with the rest of the public library files.
+
+EOM
+fn=d+~
+rp='Where do you want to put the public architecture-dependent libraries?'
+. ./getfile
+archlib="$ans"
+archlibexp="$ansexp"
+if $test X"$archlib" = X"$privlib"; then
+ d_archlib="$undef"
+else
+ d_archlib="$define"
+fi
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installarchlib=`echo $archlibexp | sed "s#^$prefix#$installprefix#"`
+else
+ installarchlib="$archlibexp"
+fi
-Your C linker may need flags. For this question you should
-include -L/whatever and any other flags used by the C linker, but you
-should NOT include libraries like -lwhatever.
-Make sure you include the appropriate -L/path flags if your C linker
-does not normally search all of the directories you specified above,
-namely
- $libpth
-To use no flags, specify the word "none".
+: Binary compatibility with 5.005 is not possible for builds
+: with advanced features
+case "$usethreads$usemultiplicity" in
+*define*)
+ bincompat5005="$undef"
+ d_bincompat5005="$undef"
+ ;;
+*) $cat <<EOM
-EOH
+This version of Perl can be compiled for binary compatibility with 5.005.
+If you decide to do so, you will be able to continue using most of the
+extensions that were compiled for Perl 5.005.
-rp="Any additional ld flags (NOT including libraries)?"
-. ./myread
-case "$ans" in
-none) ldflags='';;
-*) ldflags="$ans";;
+EOM
+ case "$bincompat5005$d_bincompat5005" in
+ *"$undef"*) dflt=n ;;
+ *) dflt=y ;;
+ esac
+ rp='Binary compatibility with Perl 5.005?'
+ . ./myread
+ case "$ans" in
+ y*) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ set d_bincompat5005
+ eval $setvar
+ case "$d_bincompat5005" in
+ "$define")
+ bincompat5005="$define"
+ ;;
+ *) bincompat5005="$undef"
+ d_bincompat5005="$undef"
+ ;;
+ esac
+ ;;
esac
-rmlist="$rmlist pdp11"
-: coherency check
-echo " "
-echo "Checking your choice of C compiler and flags for coherency..." >&4
-$cat > try.c <<'EOF'
-#include <stdio.h>
-int main() { printf("Ok\n"); exit(0); }
-EOF
-set X $cc $optimize $ccflags -o try $ldflags try.c $libs
-shift
-$cat >try.msg <<'EOM'
-I've tried to compile and run the following simple program:
-EOM
-$cat try.c >> try.msg
+: see if setuid scripts can be secure
+$cat <<EOM
-$cat >> try.msg <<EOM
+Some kernels have a bug that prevents setuid #! scripts from being
+secure. Some sites have disabled setuid #! scripts because of this.
-I used the command:
+First let's decide if your kernel supports secure setuid #! scripts.
+(If setuid #! scripts would be secure but have been disabled anyway,
+don't say that they are secure if asked.)
- $*
- ./try
+EOM
-and I got the following output:
+val="$undef"
+if $test -d /dev/fd; then
+ echo "#!$ls" >reflect
+ chmod +x,u+s reflect
+ ./reflect >flect 2>&1
+ if $contains "/dev/fd" flect >/dev/null; then
+ echo "Congratulations, your kernel has secure setuid scripts!" >&4
+ val="$define"
+ else
+ $cat <<EOM
+If you are not sure if they are secure, I can check but I'll need a
+username and password different from the one you are using right now.
+If you don't have such a username or don't want me to test, simply
+enter 'none'.
EOM
-dflt=y
-if sh -c "$cc $optimize $ccflags -o try $ldflags try.c $libs" >>try.msg 2>&1; then
- if sh -c './try' >>try.msg 2>&1; then
- xxx=`./try`
- case "$xxx" in
- "Ok") dflt=n ;;
- *) echo 'The program compiled OK, but produced no output.' >> try.msg
- case " $libs " in
- *" -lsfio "*)
- cat >> try.msg <<'EOQS'
-If $libs contains -lsfio, and sfio is mis-configured, then it
-sometimes (apparently) runs and exits with a 0 status, but with no
-output! It may have to do with sfio's use of _exit vs. exit.
-
-EOQS
- rp="You have a big problem. Shall I abort Configure"
- dflt=y
- ;;
+ rp='Other username to test security of setuid scripts with?'
+ dflt='none'
+ . ./myread
+ case "$ans" in
+ n|none)
+ case "$d_suidsafe" in
+ '') echo "I'll assume setuid scripts are *not* secure." >&4
+ dflt=n;;
+ "$undef")
+ echo "Well, the $hint value is *not* secure." >&4
+ dflt=n;;
+ *) echo "Well, the $hint value *is* secure." >&4
+ dflt=y;;
esac
;;
+ *)
+ $rm -f reflect flect
+ echo "#!$ls" >reflect
+ chmod +x,u+s reflect
+ echo >flect
+ chmod a+w flect
+ echo '"su" will (probably) prompt you for '"$ans's password."
+ su $ans -c './reflect >flect'
+ if $contains "/dev/fd" flect >/dev/null; then
+ echo "Okay, it looks like setuid scripts are secure." >&4
+ dflt=y
+ else
+ echo "I don't think setuid scripts are secure." >&4
+ dflt=n
+ fi
+ ;;
+ esac
+ rp='Does your kernel have *secure* setuid scripts?'
+ . ./myread
+ case "$ans" in
+ [yY]*) val="$define";;
+ *) val="$undef";;
esac
- else
- echo "The program compiled OK, but exited with status $?." >>try.msg
- rp="You have a problem. Shall I abort Configure"
- dflt=y
fi
else
- echo "I can't compile the test program." >>try.msg
- rp="You have a BIG problem. Shall I abort Configure"
- dflt=y
+ echo "I don't think setuid scripts are secure (no /dev/fd directory)." >&4
+ echo "(That's for file descriptors, not floppy disks.)"
+ val="$undef"
fi
-case "$dflt" in
-y)
- $cat try.msg >&4
- case "$knowitall" in
- '')
- echo "(The supplied flags or libraries might be incorrect.)"
- ;;
- *) dflt=n;;
+set d_suidsafe
+eval $setvar
+
+$rm -f reflect flect
+
+: now see if they want to do setuid emulation
+echo " "
+val="$undef"
+case "$d_suidsafe" in
+"$define")
+ val="$undef"
+ echo "No need to emulate SUID scripts since they are secure here." >& 4
+ ;;
+*)
+ $cat <<EOM
+Some systems have disabled setuid scripts, especially systems where
+setuid scripts cannot be secure. On systems where setuid scripts have
+been disabled, the setuid/setgid bits on scripts are currently
+useless. It is possible for $package to detect those bits and emulate
+setuid/setgid in a secure fashion. This emulation will only work if
+setuid scripts have been disabled in your kernel.
+
+EOM
+ case "$d_dosuid" in
+ "$define") dflt=y ;;
+ *) dflt=n ;;
esac
- echo " "
+ rp="Do you want to do setuid/setgid emulation?"
. ./myread
case "$ans" in
- n*|N*) ;;
- *) echo "Ok. Stopping Configure." >&4
- exit 1
- ;;
+ [yY]*) val="$define";;
+ *) val="$undef";;
esac
;;
-n) echo "OK, that should do.";;
esac
-$rm -f try try.* core
+set d_dosuid
+eval $setvar
: determine filename position in cpp output
echo " "
esac
echo "Your system wants malloc to return '$malloctype', it would seem." >&4
-case "$freetype" in
-'')
- if $cc $ccflags -c -DTRY_FREE malloc.c >/dev/null 2>&1; then
- freetype='void'
- else
- freetype='int'
- fi
+case "$freetype" in
+'')
+ if $cc $ccflags -c -DTRY_FREE malloc.c >/dev/null 2>&1; then
+ freetype='void'
+ else
+ freetype='int'
+ fi
+ ;;
+esac
+echo "Your system uses $freetype free(), it would seem." >&4
+$rm -f malloc.[co]
+$cat <<EOM
+
+After $package is installed, you may wish to install various
+add-on modules and utilities. Typically, these add-ons will
+be installed under $prefix with the rest
+of this package. However, you may wish to install such add-ons
+elsewhere under a different prefix.
+
+If you do not wish to put everything under a single prefix, that's
+ok. You will be prompted for the individual locations; this siteprefix
+is only used to suggest the defaults.
+
+The default should be fine for most people.
+
+EOM
+fn=d~+
+rp='Installation prefix to use for add-on modules and utilities?'
+: XXX Here might be another good place for an installstyle setting.
+case "$siteprefix" in
+'') dflt=$prefix ;;
+*) dflt=$siteprefix ;;
+esac
+. ./getfile
+: XXX Prefixit unit does not yet support siteprefix and vendorprefix
+oldsiteprefix=''
+case "$siteprefix" in
+'') ;;
+*) case "$ans" in
+ "$prefix") ;;
+ *) oldsiteprefix="$prefix";;
+ esac
+ ;;
+esac
+siteprefix="$ans"
+siteprefixexp="$ansexp"
+
+: determine where site specific libraries go.
+: Usual default is /usr/local/lib/perl5/site_perl/$version
+: The default "style" setting is made in installstyle.U
+: XXX No longer works with Prefixit stuff.
+prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+case "$sitelib" in
+'') case "$installstyle" in
+ *lib/perl5*) dflt=$siteprefix/lib/$package/site_$prog/$version ;;
+ *) dflt=$siteprefix/lib/site_$prog/$version ;;
+ esac
+ ;;
+*) dflt="$sitelib"
+ ;;
+esac
+$cat <<EOM
+
+The installation process will create a directory for
+site-specific extensions and modules. Most users find it convenient
+to place all site-specific files in this directory rather than in the
+main distribution directory.
+
+EOM
+fn=d~+
+rp='Pathname for the site-specific library files?'
+. ./getfile
+sitelib="$ans"
+sitelibexp="$ansexp"
+sitelib_stem=`echo "$sitelibexp" | sed "s,/$version$,,"`
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitelib=`echo $sitelibexp | $sed "s#^$prefix#$installprefix#"`
+else
+ installsitelib="$sitelibexp"
+fi
+
+: determine where site specific architecture-dependent libraries go.
+: sitelib default is /usr/local/lib/perl5/site_perl/$version
+: sitearch default is /usr/local/lib/perl5/site_perl/$version/$archname
+: sitelib may have an optional trailing /share.
+case "$sitearch" in
+'') dflt=`echo $sitelib | $sed 's,/share$,,'`
+ dflt="$dflt/$archname"
+ ;;
+*) dflt="$sitearch"
;;
esac
-echo "Your system uses $freetype free(), it would seem." >&4
-$rm -f malloc.[co]
+set sitearch sitearch none
+eval $prefixit
+$cat <<EOM
+
+The installation process will also create a directory for
+architecture-dependent site-specific extensions and modules.
+
+EOM
+fn=d~+
+rp='Pathname for the site-specific architecture-dependent library files?'
+. ./getfile
+sitearch="$ans"
+sitearchexp="$ansexp"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitearch=`echo $sitearchexp | sed "s#^$prefix#$installprefix#"`
+else
+ installsitearch="$sitearchexp"
+fi
+
$cat <<EOM
The installation process will also create a directory for
rp='Do you want to configure vendor-specific add-on directories?'
case "$usevendorprefix" in
define|true|[yY]*) dflt=y ;;
-*) dflt=n ;;
+*) : User may have set vendorprefix directly on Configure command line.
+ case "$vendorprefix" in
+ ''|' ') dflt=n ;;
+ *) dflt=y ;;
+ esac
+ ;;
esac
. ./myread
case "$ans" in
*) dflt=$vendorprefix ;;
esac
. ./getfile
+ : XXX Prefixit unit does not yet support siteprefix and vendorprefix
oldvendorprefix=''
case "$vendorprefix" in
'') ;;
;;
*) d_vendorlib="$define"
: determine where vendor-supplied modules go.
- : Usual default is /usr/local/lib/perl5/vendor_perl
- prog=`echo $package | $sed 's/-*[0-9.]*$//'`
- case "$installstyle" in
- *lib/perl5*) dflt=$vendorprefix/lib/$package/vendor_$prog ;;
- *) dflt=$vendorprefix/lib/vendor_$prog ;;
+ : Usual default is /usr/local/lib/perl5/vendor_perl/$version
+ case "$vendorlib" in
+ '')
+ prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+ case "$installstyle" in
+ *lib/perl5*) dflt=$vendorprefix/lib/$package/vendor_$prog/$version ;;
+ *) dflt=$vendorprefix/lib/vendor_$prog/$version ;;
+ esac
+ ;;
+ *) dflt="$vendorlib"
+ ;;
esac
fn=d~+
rp='Pathname for the vendor-supplied library files?'
. ./getfile
vendorlib="$ans"
vendorlibexp="$ansexp"
- : Change installation prefix, if necessary.
- if $test X"$prefix" != X"$installprefix"; then
- installvendorlib=`echo $vendorlibexp | $sed "s#^$prefix#$installprefix#"`
- else
- installvendorlib="$vendorlibexp"
- fi
;;
esac
+vendorlib_stem=`echo "$vendorlibexp" | sed "s,/$version$,,"`
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installvendorlib=`echo $vendorlibexp | $sed "s#^$prefix#$installprefix#"`
+else
+ installvendorlib="$vendorlibexp"
+fi
+
+case "$vendorprefix" in
+'') d_vendorarch="$undef"
+ vendorarch=''
+ vendorarchexp=''
+ ;;
+*) d_vendorarch="$define"
+ : determine where vendor-supplied architecture-dependent libraries go.
+ : vendorlib default is /usr/local/lib/perl5/vendor_perl/$version
+ : vendorarch default is /usr/local/lib/perl5/vendor_perl/$version/$archname
+ : vendorlib may have an optional trailing /share.
+ case "$vendorarch" in
+ '') dflt=`echo $vendorlib | $sed 's,/share$,,'`
+ dflt="$dflt/$archname"
+ ;;
+ *) dflt="$vendorarch" ;;
+ esac
+ fn=d~+
+ rp='Pathname for vendor-supplied architecture-dependent files?'
+ . ./getfile
+ vendorarch="$ans"
+ vendorarchexp="$ansexp"
+ ;;
+esac
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installvendorarch=`echo $vendorarchexp | sed "s#^$prefix#$installprefix#"`
+else
+ installvendorarch="$vendorarchexp"
+fi
+
+: Final catch-all directories to search
+$cat <<EOM
+
+Lastly, you can have perl look in other directories for extensions and
+modules in addition to those already specified.
+These directories will be searched after
+ $sitearch
+ $sitelib
+EOM
+test X"$vendorlib" != "X" && echo ' ' $vendorlib
+test X"$vendorarch" != "X" && echo ' ' $vendorarch
+echo ' '
+case "$otherlibdirs" in
+''|' ') dflt='none' ;;
+*) dflt="$otherlibdirs" ;;
+esac
+$cat <<EOM
+Enter a colon-separated set of extra paths to include in perl's @INC
+search path, or enter 'none' for no extra paths.
+
+EOM
+
+rp='Colon-separated list of additional directories for perl to search?'
+. ./myread
+case "$ans" in
+' '|''|none) otherlibdirs=' ' ;;
+*) otherlibdirs="$ans" ;;
+esac
+case "$otherlibdirs" in
+' ') val=$undef ;;
+*) val=$define ;;
+esac
+set d_perl_otherlibdirs
+eval $setvar
: Cruising for prototypes
echo " "
installbin="$binexp"
fi
+: Find perl5.005 or later.
+echo "Looking for a previously installed perl5.005 or later... "
+case "$perl5" in
+'') for tdir in `echo "$binexp:$PATH" | $sed "s/$path_sep/ /g"`; do
+ : Check if this perl is recent and can load a simple module
+ if $test -x $tdir/perl && $tdir/perl -Mless -e 'use 5.005;' >/dev/null 2>&1; then
+ perl5=$tdir/perl
+ break;
+ elif $test -x $tdir/perl5 && $tdir/perl5 -Mless -e 'use 5.005;' >/dev/null 2>&1; then
+ perl5=$tdir/perl
+ break;
+ fi
+ done
+ ;;
+*) perl5="$perl5"
+ ;;
+esac
+case "$perl5" in
+'') echo "None found. That's ok.";;
+*) echo "Using $perl5." ;;
+esac
+
+: Determine list of previous versions to include in @INC
+$cat > getverlist <<EOPL
+#!$perl5 -w
+use File::Basename;
+\$api_versionstring = "$api_versionstring";
+\$version = "$version";
+\$stem = "$sitelib_stem";
+\$archname = "$archname";
+EOPL
+ $cat >> getverlist <<'EOPL'
+# Can't have leading @ because metaconfig interprets it as a command!
+;@inc_version_list=();
+# XXX Redo to do opendir/readdir?
+if (-d $stem) {
+ chdir($stem);
+ ;@candidates = glob("5.*");
+}
+else {
+ ;@candidates = ();
+}
+
+# XXX ToDo: These comparisons must be reworked when two-digit
+# subversions come along, so that 5.7.10 compares as greater than
+# 5.7.3! By that time, hope that 5.6.x is sufficiently
+# widespread that we can use the built-in version vectors rather
+# than reinventing them here. For 5.6.0, however, we must
+# assume this script will likely be run by 5.005_0x. --AD 1/2000.
+foreach $d (@candidates) {
+ if ($d lt $version) {
+ if ($d ge $api_versionstring) {
+ unshift(@inc_version_list, grep { -d } "$d/$archname", $d);
+ }
+ elsif ($d ge "5.005") {
+ unshift(@inc_version_list, grep { -d } $d);
+ }
+ }
+ else {
+ # Skip newer version. I.e. don't look in
+ # 5.7.0 if we're installing 5.6.1.
+ }
+}
+
+if (@inc_version_list) {
+ print join(' ', @inc_version_list);
+}
+else {
+ # Blank space to preserve value for next Configure run.
+ print " ";
+}
+EOPL
+chmod +x getverlist
+case "$inc_version_list" in
+'') if test -x "$perl5"; then
+ dflt=`$perl5 getverlist`
+ else
+ dflt='none'
+ fi
+ ;;
+$undef) dflt='none' ;;
+*) dflt="$inc_version_list" ;;
+esac
+case "$dflt" in
+''|' ') dflt=none ;;
+esac
+$cat <<'EOM'
+
+In order to ease the process of upgrading, this version of perl
+can be configured to use modules built and installed with earlier
+versions of perl that were installed under $prefix. Specify here
+the list of earlier versions that this version of perl should check.
+If Configure detected no earlier versions of perl installed under
+$prefix, then the list will be empty. Answer 'none' to tell perl
+to not search earlier versions.
+
+The default should almost always be sensible, so if you're not sure,
+just accept the default.
+EOM
+
+rp='List of earlier versions to include in @INC?'
+. ./myread
+case "$ans" in
+[Nn]one|''|' ') inc_version_list=' ' ;;
+*) inc_version_list="$ans" ;;
+esac
+case "$inc_version_list" in
+''|' ')
+ inc_version_list_init='0';;
+*) inc_version_list_init=`echo $inc_version_list |
+ $sed -e 's/^/"/' -e 's/ /","/g' -e 's/$/",0/'`
+ ;;
+esac
+$rm -f getverlist
+
: determine whether to install perl also as /usr/bin/perl
echo " "
if $test -d /usr/bin -a "X$installbin" != X/usr/bin; then
$cat <<EOM
-Many scripts expect to perl to be installed as /usr/bin/perl.
+Many scripts expect perl to be installed as /usr/bin/perl.
I can install the perl you are about to compile also as /usr/bin/perl
(in addition to $installbin/perl).
EOM
set installusrbinperl
eval $setvar
-: define a shorthand compile call
-compile='
-mc_file=$1;
-shift;
-$cc $optimize $ccflags $ldflags -o ${mc_file} $* ${mc_file}.c $libs > /dev/null 2>&1;'
-: define a shorthand compile call for compilations that should be ok.
-compile_ok='
-mc_file=$1;
-shift;
-$cc $optimize $ccflags $ldflags -o ${mc_file} $* ${mc_file}.c $libs;'
-
echo " "
echo "Checking for GNU C Library..." >&4
cat >gnulibc.c <<EOM
. ./getfile
usedl="$define"
: emulate basename
- dlsrc=`echo $ans | $sed -e 's@.*/\([^/]*\)$@\1@'`
+ dlsrc=`echo $ans | $sed -e 's%.*/\([^/]*\)$%\1%'`
$cat << EOM
case "$lddlflags" in
'') case "$osname" in
beos) dflt='-nostart' ;;
- hpux) dflt='-b' ;;
+ hpux) dflt='-b';
+ case "$gccversion" in
+ '') dflt="$dflt +vnocompatwarnings" ;;
+ esac
+ ;;
linux|irix*) dflt='-shared' ;;
next) dflt='none' ;;
solaris) dflt='-G' ;;
' ') dflt='none' ;;
*) dflt="$ccdlflags" ;;
esac
- rp="Any special flags to pass to $cc to use dynamic loading?"
+ rp="Any special flags to pass to $cc to use dynamic linking?"
. ./myread
case "$ans" in
none) ccdlflags=' ' ;;
;;
*) case "$useshrplib" in
'') case "$osname" in
- svr4*|dgux|dynixptx|esix|powerux|beos)
+ svr4*|dgux|dynixptx|esix|powerux|beos|cygwin*)
dflt=y
also='Building a shared libperl is required for dynamic loading to work on your system.'
;;
linux*) # ld won't link with a bare -lperl otherwise.
dflt=libperl.$so
;;
+ cygwin*) # include version
+ dflt=`echo libperl$version | sed -e 's/\./_/g'`$lib_ext
+ ;;
*) # Try to guess based on whether libc has major.minor.
case "$libc" in
*libc.$so.[0-9]*.[0-9]*) dflt=$majmin ;;
: see if we can have long filenames
echo " "
-rmlist="$rmlist /tmp/cf$$"
-$test -d /tmp/cf$$ || mkdir /tmp/cf$$
first=123456789abcdef
-second=/tmp/cf$$/$first
-$rm -f $first $second
+$rm -f $first
if (echo hi >$first) 2>/dev/null; then
if $test -f 123456789abcde; then
echo 'You cannot have filenames longer than 14 characters. Sigh.' >&4
val="$undef"
else
- if (echo hi >$second) 2>/dev/null; then
- if $test -f /tmp/cf$$/123456789abcde; then
- $cat <<'EOM'
-That's peculiar... You can have filenames longer than 14 characters, but only
-on some of the filesystems. Maybe you are using NFS. Anyway, to avoid problems
-I shall consider your system cannot support long filenames at all.
-EOM
- val="$undef"
- else
- echo 'You can have filenames longer than 14 characters.' >&4
- val="$define"
- fi
- else
- $cat <<'EOM'
-How confusing! Some of your filesystems are sane enough to allow filenames
-longer than 14 characters but some others like /tmp can't even think about them.
-So, for now on, I shall assume your kernel does not allow them at all.
-EOM
- val="$undef"
- fi
+ echo 'You can have filenames longer than 14 characters.'>&4
+ val="$define"
fi
else
$cat <<'EOM'
-You can't have filenames longer than 14 chars. You can't even think about them!
+You can't have filenames longer than 14 chars.
+You can't even think about them!
EOM
val="$undef"
fi
set d_flexfnam
eval $setvar
-$rm -rf /tmp/cf$$ 123456789abcde*
+$rm -rf 123456789abcde*
: determine where library module manual pages go
set man3dir man3dir none
echo "If you don't want the manual sources installed, answer 'none'."
prog=`echo $package | $sed 's/-*[0-9.]*$//'`
case "$man3dir" in
-'') dflt=`echo $man1dir | $sed -e 's/man1/man3/g' -e 's/man\.1/man\.3/g'`
+'') dflt=`echo "$man1dir" | $sed -e 's/man1/man3/g' -e 's/man\.1/man\.3/g'`
if $test -d "$privlib/man/man3"; then
cat <<EOM >&4
esac
fi
;;
-' ') dflt=none;;
*) dflt="$man3dir" ;;
esac
+case "$dflt" in
+' ') dflt=none ;;
+esac
echo " "
fn=dn+~
rp="Where do the $package library man pages (source) go?"
. ./getfile
man3dir="$ans"
man3direxp="$ansexp"
-case "$man1dir" in
+case "$man3dir" in
'') man3dir=' '
installman3dir='';;
esac
esac
fi
case "$hostcat" in
-'') hostcat='cat /etc/hosts';;
+'') test -f /etc/hosts && hostcat='cat /etc/hosts';;
esac
case "$groupcat" in
-'') groupcat='cat /etc/group';;
+'') test -f /etc/group && groupcat='cat /etc/group';;
esac
case "$passcat" in
-'') passcat='cat /etc/passwd';;
+'') test -f /etc/passwd && passcat='cat /etc/passwd';;
esac
: now get the host name
$sed -e 's/[ ]*#.*//; s/$/ /' > hosts && \
$test -s hosts
} || {
+ test "X$hostcat" != "X" &&
$hostcat | $sed -n -e "s/[ ]*#.*//; s/\$/ /
/[ ]$myhostname[ . ]/p" > hosts
}
I need to get your e-mail address in Internet format if possible, i.e.
something like user@host.domain. Please answer accurately since I have
no easy means to double check it. The default value provided below
-is most probably close to the reality but may not be valid from outside
+is most probably close to reality but may not be valid from outside
your organization...
EOM
rp="What path shall I use in \"eval 'exec'\"?"
. ./myread
perlpath="$ans"
- ;;
- esac
- ;;
-esac
-case "$startperl" in
-*!*) ;;
-*) echo "I'll use $perlpath in \"eval 'exec'\"" ;;
-esac
-
-: determine where public executable scripts go
-set scriptdir scriptdir
-eval $prefixit
-case "$scriptdir" in
-'')
- dflt="$bin"
- : guess some guesses
- $test -d /usr/share/scripts && dflt=/usr/share/scripts
- $test -d /usr/share/bin && dflt=/usr/share/bin
- $test -d /usr/local/script && dflt=/usr/local/script
- $test -d /usr/local/scripts && dflt=/usr/local/scripts
- $test -d $prefixexp/script && dflt=$prefixexp/script
- set dflt
- eval $prefixup
- ;;
-*) dflt="$scriptdir"
- ;;
-esac
-$cat <<EOM
-
-Some installations have a separate directory just for executable scripts so
-that they can mount it across multiple architectures but keep the scripts in
-one spot. You might, for example, have a subdirectory of /usr/share for this.
-Or you might just lump your scripts in with all your other executables.
-
-EOM
-fn=d~
-rp='Where do you keep publicly executable scripts?'
-. ./getfile
-if $test "X$ansexp" != "X$scriptdirexp"; then
- installscript=''
-fi
-scriptdir="$ans"
-scriptdirexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installscript=`echo $scriptdirexp | sed "s#^$prefix#$installprefix#"`
-else
- installscript="$scriptdirexp"
-fi
-
-$cat <<EOM
-
-After $package is installed, you may wish to install various
-add-on modules and utilities. Typically, these add-ons will
-be installed under $prefix with the rest
-of this package. However, you may wish to install such add-ons
-elsewhere under a different prefix.
-
-If you do not wish to put everything under a single prefix, that's
-ok. You will be prompted for the individual locations; this siteprefix
-is only used to suggest the defaults.
-
-The default should be fine for most people.
-
-EOM
-fn=d~+
-rp='Installation prefix to use for add-on modules and utilities?'
-: XXX Here might be another good place for an installstyle setting.
-case "$siteprefix" in
-'') dflt=$prefix ;;
-*) dflt=$siteprefix ;;
-esac
-. ./getfile
-oldsiteprefix=''
-case "$siteprefix" in
-'') ;;
-*)
- case "$ans" in
- "$prefix") ;;
- *) oldsiteprefix="$prefix";;
- esac
- ;;
-esac
-siteprefix="$ans"
-siteprefixexp="$ansexp"
-
-: determine where site specific libraries go.
-: Usual default is /usr/local/lib/perl5/site_perl
-: The default "style" setting is made in installstyle.U
-: XXX No longer works with Prefixit stuff.
-prog=`echo $package | $sed 's/-*[0-9.]*$//'`
-case "$installstyle" in
-*lib/perl5*) dflt=$siteprefix/lib/site_$prog ;;
-*) dflt=$siteprefix/lib/site_$prog ;;
-esac
-$cat <<EOM
-
-The installation process will create a directory for
-site-specific extensions and modules. Most users find it convenient
-to place all site-specific files in this directory rather than in the
-main distribution directory.
-
-EOM
-fn=d~+
-rp='Pathname for the site-specific library files?'
-. ./getfile
-sitelib="$ans"
-sitelibexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitelib=`echo $sitelibexp | sed "s#^$prefix#$installprefix#"`
-else
- installsitelib="$sitelibexp"
-fi
+ ;;
+ esac
+ ;;
+esac
+case "$startperl" in
+*!*) ;;
+*) echo "I'll use $perlpath in \"eval 'exec'\"" ;;
+esac
-: determine where site specific architecture-dependent libraries go.
-: sitelib default is /usr/local/lib/perl5/site_perl/
-: sitearch default is /usr/local/lib/perl5/site_perl/$apiversion/$archname
-: sitelib may have an optional trailing /share.
-tdflt=`echo $sitelib | $sed 's,/share$,,'`
-tdflt="$tdflt/$apiversion/$archname"
-set sitearch sitearch none
+: determine where public executable scripts go
+set scriptdir scriptdir
eval $prefixit
-case "$sitearch" in
-'') dflt="$tdflt" ;;
-*) dflt="$sitearch" ;;
+case "$scriptdir" in
+'')
+ dflt="$bin"
+ : guess some guesses
+ $test -d /usr/share/scripts && dflt=/usr/share/scripts
+ $test -d /usr/share/bin && dflt=/usr/share/bin
+ $test -d /usr/local/script && dflt=/usr/local/script
+ $test -d /usr/local/scripts && dflt=/usr/local/scripts
+ $test -d $prefixexp/script && dflt=$prefixexp/script
+ set dflt
+ eval $prefixup
+ ;;
+*) dflt="$scriptdir"
+ ;;
esac
$cat <<EOM
-
-The installation process will also create a directory for
-architecture-dependent site-specific extensions and modules.
-
+
+Some installations have a separate directory just for executable scripts so
+that they can mount it across multiple architectures but keep the scripts in
+one spot. You might, for example, have a subdirectory of /usr/share for this.
+Or you might just lump your scripts in with all your other executables.
+
EOM
-fn=nd~+
-rp='Pathname for the site-specific architecture-dependent library files?'
+fn=d~
+rp='Where do you keep publicly executable scripts?'
. ./getfile
-sitearch="$ans"
-sitearchexp="$ansexp"
+if $test "X$ansexp" != "X$scriptdirexp"; then
+ installscript=''
+fi
+scriptdir="$ans"
+scriptdirexp="$ansexp"
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installsitearch=`echo $sitearchexp | sed "s#^$prefix#$installprefix#"`
+ installscript=`echo $scriptdirexp | sed "s#^$prefix#$installprefix#"`
else
- installsitearch="$sitearchexp"
+ installscript="$scriptdirexp"
fi
: determine where add-on public executables go
case "$sitebin" in
'') dflt=$siteprefix/bin ;;
-*) dflt=$sitebin ;;
+*) dflt=$sitebin ;;
esac
fn=d~
rp='Pathname where the add-on public executables should be installed?'
installsitebin="$sitebinexp"
fi
-cat <<EOM
-
-Perl can be built to take advantage of long doubles which
-(if available) may give more accuracy and range for floating point numbers.
-
-If this doesn't make any sense to you, just accept the default 'n'.
-EOM
+: see if sqrtl exists
+set sqrtl d_sqrtl
+eval $inlibc
case "$ccflags" in
*-DUSE_LONG_DOUBLE*|*-DUSE_MORE_BITS*) uselongdouble="$define" ;;
$define|true|[yY]*) dflt='y';;
*) dflt='n';;
esac
+cat <<EOM
+
+Perl can be built to take advantage of long doubles which
+(if available) may give more accuracy and range for floating point numbers.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
rp='Try to use long doubles if available?'
. ./myread
case "$ans" in
;;
esac
-cat <<EOM
+case "$uselongdouble:$d_sqrtl" in
+$define:$undef)
+ $cat <<EOM >&4
-Perl can be built to take advantage of long longs which
-(if available) may give more range for integer numbers.
+*** You requested the use of long doubles but you do not seem to have
+*** the mathematic functions for long doubles. I'm disabling the use
+*** of long doubles.
-If this doesn't make any sense to you, just accept the default 'n'.
EOM
-
-case "$ccflags" in
-*-DUSE_LONG_LONG*) uselonglong="$define" ;;
+ uselongdouble=$undef
+ ;;
esac
-case "$uselonglong" in
+case "$useperlio" in
$define|true|[yY]*) dflt='y';;
*) dflt='n';;
esac
-rp='Try to use long longs if available?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
-esac
-set uselonglong
-eval $setvar
-
-case "$uselonglong" in
-true|[yY]*) uselonglong="$define" ;;
-esac
-
-case "$uselonglong" in
-$define)
-: Look for a hint-file generated 'call-back-unit'. If the
-: user has specified that long longs should be used,
-: we may need to set or change some other defaults.
- if $test -f uselonglong.cbu; then
- echo "Your platform has some specific hints for long longs, using them..."
- . ./uselonglong.cbu
- else
- $cat <<EOM
-(Your platform doesn't have any specific hints for long longs.)
-EOM
- fi
- ;;
-esac
-
cat <<EOM
Previous version of $package used the standard IO mechanisms as defined
problems with some extension modules. Using PerlIO with stdio is safe,
but it is slower than plain stdio and therefore is not the default.
-If this doesn't make any sense to you, just accept the default 'n'.
+If this doesn't make any sense to you, just accept the default '$dflt'.
EOM
-case "$useperlio" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
rp='Use the experimental PerlIO abstraction layer?'
. ./myread
case "$ans" in
;;
*) d_vendorbin="$define"
: determine where vendor-supplied executables go.
- dflt=$vendorprefix/bin
+ case "$vendorbin" in
+ '') dflt=$vendorprefix/bin ;;
+ *) dflt="$vendorbin" ;;
+ esac
fn=d~+
rp='Pathname for the vendor-supplied executables directory?'
. ./getfile
vendorbin="$ans"
vendorbinexp="$ansexp"
- : Change installation prefix, if necessary.
- if $test X"$prefix" != X"$installprefix"; then
- installvendorbin=`echo $vendorbinexp | $sed "s#^$prefix#$installprefix#"`
- else
- installvendorbin="$vendorbinexp"
- fi
;;
esac
-
-: Check how to convert floats to strings.
-if test "X$d_Gconvert" = X; then
- echo " "
- echo "Checking for an efficient way to convert floats to strings."
- $cat >try.c <<'EOP'
-#ifdef TRY_gconvert
-#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
-char *myname = "gconvert";
-#endif
-#ifdef TRY_gcvt
-#define Gconvert(x,n,t,b) gcvt((x),(n),(b))
-char *myname = "gcvt";
-#endif
-#ifdef TRY_sprintf
-#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
-char *myname = "sprintf";
-#endif
-
-#include <stdio.h>
-
-int
-checkit(expect, got)
-char *expect;
-char *got;
-{
- if (strcmp(expect, got)) {
- printf("%s oddity: Expected %s, got %s\n",
- myname, expect, got);
- exit(1);
- }
-}
-
-int main()
-{
- char buf[64];
- buf[63] = '\0';
-
- /* This must be 1st test on (which?) platform */
- /* Alan Burlison <AlanBurlsin@unn.unisys.com> */
- Gconvert(0.1, 8, 0, buf);
- checkit("0.1", buf);
-
- Gconvert(1.0, 8, 0, buf);
- checkit("1", buf);
-
- Gconvert(0.0, 8, 0, buf);
- checkit("0", buf);
-
- Gconvert(-1.0, 8, 0, buf);
- checkit("-1", buf);
-
- /* Some Linux gcvt's give 1.e+5 here. */
- Gconvert(100000.0, 8, 0, buf);
- checkit("100000", buf);
-
- /* Some Linux gcvt's give -1.e+5 here. */
- Gconvert(-100000.0, 8, 0, buf);
- checkit("-100000", buf);
-
- exit(0);
-}
-EOP
- case "$d_Gconvert" in
- gconvert*) xxx_list='gconvert gcvt sprintf' ;;
- gcvt*) xxx_list='gcvt gconvert sprintf' ;;
- sprintf*) xxx_list='sprintf gconvert gcvt' ;;
- *) xxx_list='gconvert gcvt sprintf' ;;
- esac
-
- for xxx_convert in $xxx_list; do
- echo "Trying $xxx_convert"
- $rm -f try try$_o
- set try -DTRY_$xxx_convert
- if eval $compile; then
- echo "$xxx_convert" found. >&4
- if ./try; then
- echo "I'll use $xxx_convert to convert floats into a string." >&4
- break;
- else
- echo "...But $xxx_convert didn't work as I expected."
- fi
- else
- echo "$xxx_convert NOT found." >&4
- fi
- done
-
- case "$xxx_convert" in
- gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
- gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
- *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
- esac
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installvendorbin=`echo $vendorbinexp | $sed "s#^$prefix#$installprefix#"`
+else
+ installvendorbin="$vendorbinexp"
fi
+: see if qgcvt exists
+set qgcvt d_qgcvt
+eval $inlibc
+
: check for length of double
echo " "
case "$doublesize" in
'')
- $echo $n "Checking to see how big your double precision numbers are...$c" >&4
+ echo "Checking to see how big your double precision numbers are..." >&4
$cat >try.c <<'EOCP'
#include <stdio.h>
int main()
set try
if eval $compile_ok; then
doublesize=`./try`
- $echo " $doublesize bytes." >&4
+ echo "Your double is $doublesize bytes long."
else
dflt='8'
echo "(I can't seem to compile the test program. Guessing...)"
: check for long doubles
echo " "
-$echo $n "Checking to see if your system supports long double..." $c >&4
+echo "Checking to see if you have long double..." >&4
echo 'int main() { long double x = 7.0; }' > try.c
set try
if eval $compile; then
val="$define"
- echo " Yes, it does." >&4
+ echo "You have long double."
else
val="$undef"
- echo " No, it doesn't." >&4
+ echo "You do not have long double."
fi
$rm try.*
set d_longdbl
case "${d_longdbl}${longdblsize}" in
$define)
echo " "
- $echo $n "Checking to see how big your long doubles are..." $c >&4
+ echo "Checking to see how big your long doubles are..." >&4
$cat >try.c <<'EOCP'
#include <stdio.h>
int main()
set try
if eval $compile; then
longdblsize=`./try$exe_ext`
- $echo " $longdblsize bytes." >&4
+ echo "Your long doubles are $longdblsize bytes long."
else
dflt='8'
echo " "
fi
fi
-if $test X"$sPRIfldbl" = X; then
- echo "Cannot figure out how to print long doubles." >&4
-fi
+if $test X"$sPRIfldbl" = X; then
+ echo "Cannot figure out how to print long doubles." >&4
+fi
+
+$rm -f try try.*
+
+fi # d_longdbl
+
+case "$sPRIfldbl" in
+'') d_PRIfldbl="$undef"; d_PRIgldbl="$undef"; d_PRIeldbl="$undef";
+ d_PRIFldbl="$undef"; d_PRIGldbl="$undef"; d_PRIEldbl="$undef";
+ ;;
+*) d_PRIfldbl="$define"; d_PRIgldbl="$define"; d_PRIeldbl="$define";
+ d_PRIFldbl="$define"; d_PRIGldbl="$define"; d_PRIEldbl="$define";
+ ;;
+esac
+
+: Check how to convert floats to strings.
+if test "X$d_Gconvert" = X; then
+ echo " "
+ echo "Checking for an efficient way to convert floats to strings."
+ echo " " > try.c
+ case "$uselongdouble" in
+ "$define") echo "#define USE_LONG_DOUBLE" >>try.c ;;
+ esac
+ case "$d_longdbl" in
+ "$define") echo "#define HAS_LONG_DOUBLE" >>try.c ;;
+ esac
+ case "$d_PRIgldbl" in
+ "$define") echo "#define HAS_PRIgldbl" >>try.c ;;
+ esac
+ $cat >>try.c <<EOP
+#ifdef TRY_gconvert
+#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
+char *myname = "gconvert";
+#endif
+#ifdef TRY_gcvt
+#define Gconvert(x,n,t,b) gcvt((x),(n),(b))
+char *myname = "gcvt";
+#endif
+#ifdef TRY_qgcvt
+#define Gconvert(x,n,t,b) qgcvt((x),(n),(b))
+char *myname = "qgcvt";
+#define DOUBLETYPE long double
+#endif
+#ifdef TRY_sprintf
+#if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE) && defined(HAS_PRIgldbl)
+#define Gconvert(x,n,t,b) sprintf((b),"%.*"$sPRIgldbl,(n),(x))
+#else
+#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
+#endif
+char *myname = "sprintf";
+#endif
+
+#ifndef DOUBLETYPE
+#if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE)
+#define DOUBLETYPE long double
+#else
+#define DOUBLETYPE double
+#endif
+#endif
+
+#include <stdio.h>
+
+#define I_STDLIB $i_stdlib
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+
+int
+checkit(expect, got)
+char *expect;
+char *got;
+{
+ if (strcmp(expect, got)) {
+ printf("%s oddity: Expected %s, got %s\n",
+ myname, expect, got);
+ exit(1);
+ }
+}
+
+int main()
+{
+ char buf[64];
+ buf[63] = '\0';
+
+ /* This must be 1st test on (which?) platform */
+ /* Alan Burlison <AlanBurlsin@unn.unisys.com> */
+ Gconvert((DOUBLETYPE)0.1, 8, 0, buf);
+ checkit("0.1", buf);
-$rm -f try try.*
+ Gconvert((DOUBLETYPE)1.0, 8, 0, buf);
+ checkit("1", buf);
-fi # d_longdbl
+ Gconvert((DOUBLETYPE)1.1, 8, 0, buf);
+ checkit("1.1", buf);
-case "$sPRIfldbl" in
-'') d_PRIfldbl="$undef"; d_PRIgldbl="$undef"; d_PRIeldbl="$undef";
- d_PRIFldbl="$undef"; d_PRIGldbl="$undef"; d_PRIEldbl="$undef";
- ;;
-*) d_PRIfldbl="$define"; d_PRIgldbl="$define"; d_PRIeldbl="$define";
- d_PRIFldbl="$define"; d_PRIGldbl="$define"; d_PRIEldbl="$define";
- ;;
-esac
+ Gconvert((DOUBLETYPE)1.01, 8, 0, buf);
+ checkit("1.01", buf);
+
+ Gconvert((DOUBLETYPE)1.001, 8, 0, buf);
+ checkit("1.001", buf);
+
+ Gconvert((DOUBLETYPE)1.0001, 8, 0, buf);
+ checkit("1.0001", buf);
+
+ Gconvert((DOUBLETYPE)1.00001, 8, 0, buf);
+ checkit("1.00001", buf);
+
+ Gconvert((DOUBLETYPE)1.000001, 8, 0, buf);
+ checkit("1.000001", buf);
+
+ Gconvert((DOUBLETYPE)0.0, 8, 0, buf);
+ checkit("0", buf);
+
+ Gconvert((DOUBLETYPE)-1.0, 8, 0, buf);
+ checkit("-1", buf);
+
+ /* Some Linux gcvt's give 1.e+5 here. */
+ Gconvert((DOUBLETYPE)100000.0, 8, 0, buf);
+ checkit("100000", buf);
+
+ /* Some Linux gcvt's give -1.e+5 here. */
+ Gconvert((DOUBLETYPE)-100000.0, 8, 0, buf);
+ checkit("-100000", buf);
+
+ exit(0);
+}
+EOP
+ case "$d_Gconvert" in
+ gconvert*) xxx_list='gconvert gcvt sprintf' ;;
+ gcvt*) xxx_list='gcvt gconvert sprintf' ;;
+ sprintf*) xxx_list='sprintf gconvert gcvt' ;;
+ *) xxx_list='gconvert gcvt sprintf' ;;
+ esac
+
+ case "$d_longdbl$uselongdouble$d_qgcvt" in
+ "$define$define$define") xxx_list="`echo $xxx_list|sed 's/gcvt/qgcvt gcvt/'`" ;;
+ esac
+
+ for xxx_convert in $xxx_list; do
+ echo "Trying $xxx_convert..."
+ $rm -f try try$_o
+ set try -DTRY_$xxx_convert
+ if eval $compile; then
+ echo "$xxx_convert() found." >&4
+ if ./try; then
+ echo "I'll use $xxx_convert to convert floats into a string." >&4
+ break;
+ else
+ echo "...But $xxx_convert didn't work as I expected."
+ fi
+ else
+ echo "$xxx_convert NOT found." >&4
+ fi
+ done
+
+ case "$xxx_convert" in
+ gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
+ gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
+ qgcvt) d_Gconvert='qgcvt((x),(n),(b))' ;;
+ *) case "$uselongdouble$d_longdbl$d_PRIgldbl" in
+ "$define$define$define")
+ d_Gconvert="sprintf((b),\"%.*$sPRIgldbl\",(n),(x))" ;;
+ *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
+ esac
+ ;;
+ esac
+fi
: Initialize h_fcntl
h_fcntl=false
set bzero d_bzero
eval $inlibc
-: check for lengths of integral types
-echo " "
-case "$intsize" in
-'')
- echo "Checking to see how big your integers are..." >&4
- $cat >intsize.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("intsize=%d;\n", (int)sizeof(int));
- printf("longsize=%d;\n", (int)sizeof(long));
- printf("shortsize=%d;\n", (int)sizeof(short));
- exit(0);
-}
-EOCP
- set intsize
- if eval $compile_ok && ./intsize > /dev/null; then
- eval `./intsize`
- echo "Your integers are $intsize bytes long."
- echo "Your long integers are $longsize bytes long."
- echo "Your short integers are $shortsize bytes long."
- else
- $cat >&4 <<EOM
-!
-Help! I can't compile and run the intsize test program: please enlighten me!
-(This is probably a misconfiguration in your system or libraries, and
-you really ought to fix it. Still, I'll try anyway.)
-!
-EOM
- dflt=4
- rp="What is the size of an integer (in bytes)?"
- . ./myread
- intsize="$ans"
- dflt=$intsize
- rp="What is the size of a long integer (in bytes)?"
- . ./myread
- longsize="$ans"
- dflt=2
- rp="What is the size of a short integer (in bytes)?"
- . ./myread
- shortsize="$ans"
- fi
- ;;
-esac
-$rm -f intsize intsize.*
-
: see if signal is declared as pointer to function returning int or void
echo " "
xxx=`./findhdr signal.h`
set endservent d_endsent
eval $inlibc
-: see if endspent exists
-set endspent d_endspent
-eval $inlibc
-
: Locate the flags for 'open()'
echo " "
$cat >open3.c <<'EOCP'
#ifdef I_UNISTD
#include <unistd.h>
#endif
-#ifdef $i_string
+#$i_string I_STRING
+#ifdef I_STRING
#include <string.h>
#else
#include <strings.h>
EOM
d_fd_macros="$undef"
fi
- else
- echo "Well, you got zip. That's OK, I can roll my own fd_set stuff." >&4
- d_fd_set="$undef"
- d_fds_bits="$undef"
- d_fd_macros="$undef"
- fi
-fi
-$rm -f fd_set*
-
-: see if fgetpos exists
-set fgetpos d_fgetpos
-eval $inlibc
-
-: see if flock exists
-set flock d_flock
-eval $inlibc
-
-: see if fork exists
-set fork d_fork
-eval $inlibc
-
-: see if pathconf exists
-set pathconf d_pathconf
-eval $inlibc
-
-: see if fpathconf exists
-set fpathconf d_fpathconf
-eval $inlibc
-
-: define an is-a-typedef? function
-typedef='type=$1; var=$2; def=$3; shift; shift; shift; inclist=$@;
-case "$inclist" in
-"") inclist="sys/types.h";;
-esac;
-eval "varval=\$$var";
-case "$varval" in
-"")
- $rm -f temp.c;
- for inc in $inclist; do
- echo "#include <$inc>" >>temp.c;
- done;
- echo "#ifdef $type" >> temp.c;
- echo "printf(\"We have $type\");" >> temp.c;
- echo "#endif" >> temp.c;
- $cppstdin $cppflags $cppminus < temp.c >temp.E 2>/dev/null;
- if $contains $type temp.E >/dev/null 2>&1; then
- eval "$var=\$type";
- else
- eval "$var=\$def";
- fi;
- $rm -f temp.?;;
-*) eval "$var=\$varval";;
-esac'
-
-: define an is-a-typedef? function that prompts if the type is not available.
-typedef_ask='type=$1; var=$2; def=$3; shift; shift; shift; inclist=$@;
-case "$inclist" in
-"") inclist="sys/types.h";;
-esac;
-eval "varval=\$$var";
-case "$varval" in
-"")
- $rm -f temp.c;
- for inc in $inclist; do
- echo "#include <$inc>" >>temp.c;
- done;
- echo "#ifdef $type" >> temp.c;
- echo "printf(\"We have $type\");" >> temp.c;
- echo "#endif" >> temp.c;
- $cppstdin $cppflags $cppminus < temp.c >temp.E 2>/dev/null;
- echo " " ;
- echo "$rp" | $sed -e "s/What is/Looking for/" -e "s/?/./";
- if $contains $type temp.E >/dev/null 2>&1; then
- echo "$type found." >&4;
- eval "$var=\$type";
- else
- echo "$type NOT found." >&4;
- dflt="$def";
- . ./myread ;
- eval "$var=\$ans";
- fi;
- $rm -f temp.?;;
-*) eval "$var=\$varval";;
-esac'
-
-: see what type lseek is declared as in the kernel
-rp="What is the type used for lseek's offset on this system?"
-set off_t lseektype long stdio.h sys/types.h
-eval $typedef_ask
-
-echo " "
-$echo $n "Checking to see how big your file offsets are...$c" >&4
-$cat >try.c <<EOCP
-#include <sys/types.h>
-#include <stdio.h>
-int main()
-{
- printf("%d\n", (int)sizeof($lseektype));
- return(0);
-}
-EOCP
-set try
-if eval $compile_ok; then
- lseeksize=`./try`
- $echo " $lseeksize bytes." >&4
-else
- dflt='4'
- echo " "
- echo "(I can't seem to compile the test program. Guessing...)"
- rp="What is the size of your file offsets (in bytes)?"
- . ./myread
- lseeksize="$ans"
-fi
-$rm -f try.c try
-
-: see what type file positions are declared as in the library
-rp="What is the type for file position used by fsetpos()?"
-set fpos_t fpostype long stdio.h sys/types.h
-eval $typedef_ask
-
-echo " "
-case "$fpostype" in
-*_t) zzz="$fpostype" ;;
-*) zzz="fpos_t" ;;
-esac
-echo "Checking the size of $zzz..." >&4
-cat > try.c <<EOCP
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- printf("%d\n", (int)sizeof($fpostype));
- exit(0);
-}
-EOCP
-set try
-if eval $compile_ok; then
- yyy=`./try`
- case "$yyy" in
- '') fpossize=4
- echo "(I can't execute the test program--guessing $fpossize.)" >&4
- ;;
- *) fpossize=$yyy
- echo "Your $zzz size is $fpossize bytes."
- ;;
- esac
-else
- fpossize=4
- echo "(I can't compile the test program--guessing $fpossize.)" >&4
+ else
+ echo "Well, you got zip. That's OK, I can roll my own fd_set stuff." >&4
+ d_fd_set="$undef"
+ d_fds_bits="$undef"
+ d_fd_macros="$undef"
+ fi
fi
+$rm -f fd_set*
+: see if fgetpos exists
+set fgetpos d_fgetpos
+eval $inlibc
+: see if flock exists
+set flock d_flock
+eval $inlibc
+
+: see if fork exists
+set fork d_fork
+eval $inlibc
+
+: see if pathconf exists
+set pathconf d_pathconf
+eval $inlibc
+
+: see if fpathconf exists
+set fpathconf d_fpathconf
+eval $inlibc
-: check for off64_t
-echo " "
-echo "Checking to see if your system supports off64_t..." >&4
-$cat >try.c <<EOCP
-#include <sys/types.h>
-#include <unistd.h>
-int main() { off64_t x = 7; }'
-EOCP
-set try
-if eval $compile; then
- val="$define"
- echo "Yes, it does."
-else
- val="$undef"
- echo "No, it doesn't."
- case "$lseeksize" in
- 8) echo "(Your off_t is 64 bits, so you could use that.)" ;;
- esac
-fi
-$rm -f try.* try
-set d_off64_t
-eval $setvar
: check for fpos64_t
echo " "
-echo "Checking to see if your system supports fpos64_t..." >&4
+echo "Checking to see if you have fpos64_t..." >&4
$cat >try.c <<EOCP
-#include <sys/stdio.h>
-int main() { fpos64_t x x = 7; }'
+#include <stdio.h>
+int main() { fpos64_t x = 7; }
EOCP
set try
if eval $compile; then
val="$define"
- echo "Yes, it does."
+ echo "You have fpos64_t."
else
val="$undef"
- echo "No, it doesn't."
+ echo "You do not have fpos64_t."
case "$fpossize" in
8) echo "(Your fpos_t is 64 bits, so you could use that.)" ;;
esac
set d_fpos64_t
eval $setvar
+: see if frexpl exists
+set frexpl d_frexpl
+eval $inlibc
+
hasstruct='varname=$1; struct=$2; shift; shift;
while $test $# -ge 2; do
case "$1" in
set fseeko d_fseeko
eval $inlibc
case "$longsize" in
-8) echo "(Your long is 64 bits, so in a pinch you could use fseek.)" ;;
+8) echo "(Your long is 64 bits, so you could use fseek.)" ;;
esac
: see if fsetpos exists
set ftello d_ftello
eval $inlibc
case "$longsize" in
-8) echo "(Your long is 64 bits, so in a pinch you could use ftell.)" ;;
+8) echo "(Your long is 64 bits, so you could use ftell.)" ;;
esac
+: see if getcwd exists
+set getcwd d_getcwd
+eval $inlibc
+
+: see if getespwnam exists
+set getespwnam d_getespwnam
+eval $inlibc
+
+
+: see if getfsstat exists
+set getfsstat d_getfsstat
+eval $inlibc
+
: see if getgrent exists
set getgrent d_getgrent
eval $inlibc
set d_getprotoprotos getprotoent $i_netdb netdb.h
eval $hasproto
+: see if getprpwnam exists
+set getprpwnam d_getprpwnam
+eval $inlibc
+
: see if getpwent exists
set getpwent d_getpwent
eval $inlibc
set d_getservprotos getservent $i_netdb netdb.h
eval $hasproto
-: see if getspent exists
-set getspent d_getspent
-eval $inlibc
-
: see if getspnam exists
set getspnam d_getspnam
eval $inlibc
set d_htonl
eval $setvar
+: see if iconv exists
+set iconv d_iconv
+eval $inlibc
+
: index or strchr
echo " "
if set index val -f; eval $csym; $val; then
: check for int64_t
echo " "
-$echo $n "Checking to see if your system supports int64_t...$c" >&4
+echo "Checking to see if you have int64_t..." >&4
$cat >try.c <<EOCP
#include <sys/types.h>
#$i_inttypes I_INTTYPES
set try
if eval $compile; then
val="$define"
- echo " Yes, it does." >&4
+ echo "You have int64_t."
else
val="$undef"
- echo " No, it doesn't." >&4
+ echo "You do not have int64_t."
fi
$rm -f try try.*
-set d_int64t
+set d_int64_t
eval $setvar
: Look for isascii
eval $setvar
$rm -f isascii*
+: see if isnan exists
+set isnan d_isnan
+eval $inlibc
+
+: see if isnanl exists
+set isnanl d_isnanl
+eval $inlibc
+
: see if killpg exists
set killpg d_killpg
eval $inlibc
set localeconv d_locconv
eval $inlibc
-: see if lockf exists
-set lockf d_lockf
-eval $inlibc
+: see if lockf exists
+set lockf d_lockf
+eval $inlibc
+
+: check for long long
+echo " "
+echo "Checking to see if you have long long..." >&4
+echo 'int main() { long long x = 7; return 0; }' > try.c
+set try
+if eval $compile; then
+ val="$define"
+ echo "You have long long."
+else
+ val="$undef"
+ echo "You do not have long long."
+fi
+$rm try.*
+set d_longlong
+eval $setvar
+
+: check for length of long long
+case "${d_longlong}${longlongsize}" in
+$define)
+ echo " "
+ echo "Checking to see how big your long longs are..." >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", (int)sizeof(long long));
+ return(0);
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ longlongsize=`./try$exe_ext`
+ echo "Your long longs are $longlongsize bytes long."
+ else
+ dflt='8'
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of a long long (in bytes)?"
+ . ./myread
+ longlongsize="$ans"
+ fi
+ if $test "X$longsize" = "X$longlongsize"; then
+ echo "(That isn't any different from an ordinary long.)"
+ fi
+ ;;
+esac
+$rm -f try.* try
+
+: see if prototype for lseek is available
+echo " "
+set d_lseekproto lseek $i_systypes sys/types.h $i_unistd unistd.h
+eval $hasproto
+
+: see if lstat exists
+set lstat d_lstat
+eval $inlibc
+
+: see if madvise exists
+set madvise d_madvise
+eval $inlibc
+
+: see if mblen exists
+set mblen d_mblen
+eval $inlibc
+
+: see if mbstowcs exists
+set mbstowcs d_mbstowcs
+eval $inlibc
+
+: see if mbtowc exists
+set mbtowc d_mbtowc
+eval $inlibc
+
+: see if memchr exists
+set memchr d_memchr
+eval $inlibc
+
+: see if memcmp exists
+set memcmp d_memcmp
+eval $inlibc
+
+: see if memcpy exists
+set memcpy d_memcpy
+eval $inlibc
+
+: see if memmove exists
+set memmove d_memmove
+eval $inlibc
+
+: see if memset exists
+set memset d_memset
+eval $inlibc
+
+: see if mkdir exists
+set mkdir d_mkdir
+eval $inlibc
+
+: see if mkdtemp exists
+set mkdtemp d_mkdtemp
+eval $inlibc
+
+: see if mkfifo exists
+set mkfifo d_mkfifo
+eval $inlibc
+
+: see if mkstemp exists
+set mkstemp d_mkstemp
+eval $inlibc
+
+: see if mkstemps exists
+set mkstemps d_mkstemps
+eval $inlibc
+
+: see if mktime exists
+set mktime d_mktime
+eval $inlibc
+
+: see if this is a sys/mman.h system
+set sys/mman.h i_sysmman
+eval $inhdr
+
+: see if mmap exists
+set mmap d_mmap
+eval $inlibc
+: see what shmat returns
+: default to something harmless
+mmaptype='void *'
+case "$i_sysmman$d_mmap" in
+"$define$define")
+ $cat >mmap.c <<'END'
+#include <sys/mman.h>
+void *mmap();
+END
+ if $cc $ccflags -c mmap.c >/dev/null 2>&1; then
+ mmaptype='void *'
+ else
+ mmaptype='caddr_t'
+ fi
+ echo "and it returns ($mmaptype)." >&4
+ ;;
+esac
+
+
+
+: see if modfl exists
+set modfl d_modfl
+eval $inlibc
+
+: see if mprotect exists
+set mprotect d_mprotect
+eval $inlibc
+
+: see if msgctl exists
+set msgctl d_msgctl
+eval $inlibc
+
+: see if msgget exists
+set msgget d_msgget
+eval $inlibc
+
+: see if msgsnd exists
+set msgsnd d_msgsnd
+eval $inlibc
+
+: see if msgrcv exists
+set msgrcv d_msgrcv
+eval $inlibc
+
+: see how much of the 'msg*(2)' library is present.
+h_msg=true
+echo " "
+case "$d_msgctl$d_msgget$d_msgsnd$d_msgrcv" in
+*"$undef"*) h_msg=false;;
+esac
+case "$osname" in
+freebsd)
+ case "`ipcs 2>&1`" in
+ "SVID messages"*"not configured"*)
+ echo "Your $osname does not have the msg*(2) configured." >&4
+ h_msg=false
+ val="$undef"
+ set msgctl d_msgctl
+ eval $setvar
+ set msgget d_msgget
+ eval $setvar
+ set msgsnd d_msgsnd
+ eval $setvar
+ set msgrcv d_msgrcv
+ eval $setvar
+ ;;
+ esac
+ ;;
+esac
+: we could also check for sys/ipc.h ...
+if $h_msg && $test `./findhdr sys/msg.h`; then
+ echo "You have the full msg*(2) library." >&4
+ val="$define"
+else
+ echo "You don't have the full msg*(2) library." >&4
+ val="$undef"
+fi
+set d_msg
+eval $setvar
+
+: see if msync exists
+set msync d_msync
+eval $inlibc
+
+: see if munmap exists
+set munmap d_munmap
+eval $inlibc
+
+: see if nice exists
+set nice d_nice
+eval $inlibc
+
+
+echo " "
+echo "Checking which 64-bit integer type we could use..." >&4
+
+case "$intsize" in
+8) val=int
+ set quadtype
+ eval $setvar
+ val='"unsigned int"'
+ set uquadtype
+ eval $setvar
+ quadkind=1
+ ;;
+*) case "$longsize" in
+ 8) val=long
+ set quadtype
+ eval $setvar
+ val='"unsigned long"'
+ set uquadtype
+ eval $setvar
+ quadkind=2
+ ;;
+ *) case "$d_longlong:$longlongsize" in
+ define:8)
+ val='"long long"'
+ set quadtype
+ eval $setvar
+ val='"unsigned long long"'
+ set uquadtype
+ eval $setvar
+ quadkind=3
+ ;;
+ *) case "$d_int64_t" in
+ define)
+ val=int64_t
+ set quadtype
+ eval $setvar
+ val=uint64_t
+ set uquadtype
+ eval $setvar
+ quadkind=4
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
+case "$quadtype" in
+'') echo "Alas, no 64-bit integer types in sight." >&4
+ d_quad="$undef"
+ ;;
+*) if test X"$use64bitint" = Xdefine -o X"$longsize" = X8; then
+ verb="will"
+ else
+ verb="could"
+ fi
+ echo "We $verb use '$quadtype' for 64-bit integers." >&4
+ d_quad="$define"
+ ;;
+esac
-: check for long long
+: check for length of character
echo " "
-$echo $n "Checking to see if your system supports long long..." $c >&4
-echo 'int main() { long long x = 7; return 0; }' > try.c
-set try
-if eval $compile; then
- val="$define"
- echo " Yes, it does." >&4
-else
- val="$undef"
- echo " No, it doesn't." >&4
-fi
-$rm try.*
-set d_longlong
-eval $setvar
-
-: check for length of long long
-case "${d_longlong}${longlongsize}" in
-$define)
- echo " "
- $echo $n "Checking to see how big your long longs are..." $c >&4
+case "$charsize" in
+'')
+ echo "Checking to see how big your characters are (hey, you never know)..." >&4
$cat >try.c <<'EOCP'
#include <stdio.h>
int main()
{
- printf("%d\n", (int)sizeof(long long));
- return(0);
+ printf("%d\n", (int)sizeof(char));
+ exit(0);
}
EOCP
set try
if eval $compile_ok; then
- longlongsize=`./try$exe_ext`
- $echo " $longlongsize bytes." >&4
+ dflt=`./try`
else
- dflt='8'
- echo " "
+ dflt='1'
echo "(I can't seem to compile the test program. Guessing...)"
- rp="What is the size of a long long (in bytes)?"
- . ./myread
- longlongsize="$ans"
fi
- if $test "X$longsize" = "X$longlongsize"; then
- echo "(That isn't any different from an ordinary long.)"
- fi
+ ;;
+*)
+ dflt="$charsize"
;;
esac
-$rm -f try.* try
-
-: see if lstat exists
-set lstat d_lstat
-eval $inlibc
+rp="What is the size of a character (in bytes)?"
+. ./myread
+charsize="$ans"
+$rm -f try.c try
-: see if mblen exists
-set mblen d_mblen
-eval $inlibc
-: see if mbstowcs exists
-set mbstowcs d_mbstowcs
-eval $inlibc
+echo " "
+$echo "Choosing the C types to be used for Perl's internal types..." >&4
-: see if mbtowc exists
-set mbtowc d_mbtowc
-eval $inlibc
+case "$use64bitint:$d_quad:$quadtype" in
+define:define:?*)
+ ivtype="$quadtype"
+ uvtype="$uquadtype"
+ ivsize=8
+ uvsize=8
+ ;;
+*) ivtype="long"
+ uvtype="unsigned long"
+ ivsize=$longsize
+ uvsize=$longsize
+ ;;
+esac
-: see if memchr exists
-set memchr d_memchr
-eval $inlibc
+case "$uselongdouble:$d_longdbl" in
+define:define)
+ nvtype="long double"
+ nvsize=$longdblsize
+ ;;
+*) nvtype=double
+ nvsize=$doublesize
+ ;;
+esac
-: see if memcmp exists
-set memcmp d_memcmp
-eval $inlibc
+$echo "(IV will be "$ivtype", $ivsize bytes)"
+$echo "(UV will be "$uvtype", $uvsize bytes)"
+$echo "(NV will be "$nvtype", $nvsize bytes)"
-: see if memcpy exists
-set memcpy d_memcpy
-eval $inlibc
+$cat >try.c <<EOCP
+#$i_inttypes I_INTTYPES
+#ifdef I_INTTYPES
+#include <inttypes.h>
+#endif
+#include <stdio.h>
+int main() {
+#ifdef INT8
+ int8_t i = INT8_MAX;
+ uint8_t u = UINT8_MAX;
+ printf("int8_t\n");
+#endif
+#ifdef INT16
+ int16_t i = INT16_MAX;
+ uint16_t i = UINT16_MAX;
+ printf("int16_t\n");
+#endif
+#ifdef INT32
+ int32_t i = INT32_MAX;
+ uint32_t u = UINT32_MAX;
+ printf("int32_t\n");
+#endif
+}
+EOCP
-: see if memmove exists
-set memmove d_memmove
-eval $inlibc
+case "$i8type" in
+'') case "$charsize" in
+ 1) i8type=char
+ u8type="unsigned char"
+ i8size=$charsize
+ u8size=$charsize
+ ;;
+ esac
+ ;;
+esac
+case "$i8type" in
+'') set try -DINT8
+ if eval $compile; then
+ case "`./try$exe_ext`" in
+ int8_t) i8type=int8_t
+ u8type=uint8_t
+ i8size=1
+ u8size=1
+ ;;
+ esac
+ fi
+ ;;
+esac
+case "$i8type" in
+'') if $test $charsize -ge 1; then
+ i8type=char
+ u8type="unsigned char"
+ i8size=$charsize
+ u8size=$charsize
+ fi
+ ;;
+esac
-: see if memset exists
-set memset d_memset
-eval $inlibc
+case "$i16type" in
+'') case "$shortsize" in
+ 2) i16type=short
+ u16type="unsigned short"
+ i16size=$shortsize
+ u16size=$shortsize
+ ;;
+ esac
+ ;;
+esac
+case "$i16type" in
+'') set try -DINT16
+ if eval $compile; then
+ case "`./try$exe_ext`" in
+ int16_t)
+ i16type=int16_t
+ u16type=uint16_t
+ i16size=2
+ u16size=2
+ ;;
+ esac
+ fi
+ ;;
+esac
+case "$i16type" in
+'') if $test $shortsize -ge 2; then
+ i16type=short
+ u16type="unsigned short"
+ i16size=$shortsize
+ u16size=$shortsize
+ fi
+ ;;
+esac
-: see if mkdir exists
-set mkdir d_mkdir
-eval $inlibc
+case "$i32type" in
+'') case "$longsize" in
+ 4) i32type=long
+ u32type="unsigned long"
+ i32size=$longsize
+ u32size=$longsize
+ ;;
+ *) case "$intsize" in
+ 4) i32type=int
+ u32type="unsigned int"
+ i32size=$intsize
+ u32size=$intsize
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+case "$i32type" in
+'') set try -DINT32
+ if eval $compile; then
+ case "`./try$exe_ext`" in
+ int32_t)
+ i32type=int32_t
+ u32type=uint32_t
+ i32size=4
+ u32size=4
+ ;;
+ esac
+ fi
+ ;;
+esac
+case "$i32type" in
+'') if $test $intsize -ge 4; then
+ i32type=int
+ u32type="unsigned int"
+ i32size=$intsize
+ u32size=$intsize
+ fi
+ ;;
+esac
-: see if mkfifo exists
-set mkfifo d_mkfifo
-eval $inlibc
+case "$i64type" in
+'') case "$d_quad:$quadtype" in
+ define:?*)
+ i64type="$quadtype"
+ u64type="$uquadtype"
+ i64size=8
+ u64size=8
+ ;;
+ esac
+ ;;
+esac
-: see if mktime exists
-set mktime d_mktime
-eval $inlibc
+$echo "Checking whether your NVs can preserve your UVs..." >&4
+$cat <<EOP >try.c
+#include <stdio.h>
+int main() {
+ $uvtype k = ($uvtype)~0, l;
+ $nvtype d;
+ l = k;
+ d = ($nvtype)l;
+ l = ($uvtype)d;
+ if (l == k)
+ printf("preserve\n");
+ exit(0);
+}
+EOP
+set try
+if eval $compile; then
+ case "`./try$exe_ext`" in
+ preserve) d_nv_preserves_uv="$define" ;;
+ esac
+fi
+case "$d_nv_preserves_uv" in
+$define) $echo "Yes, they can." 2>&1 ;;
+*) $echo "No, they can't." 2>&1
+ d_nv_preserves_uv="$undef"
+ ;;
+esac
-: see if msgctl exists
-set msgctl d_msgctl
-eval $inlibc
+$rm -f try.* try
-: see if msgget exists
-set msgget d_msgget
-eval $inlibc
+case "$d_nv_preserves_uv" in
+"$define") d_nv_preserves_uv_bits=`expr $uvsize \* 8` ;;
+*) $echo "Checking how many bits of your UVs your NVs can preserve..." >&4
+ $cat <<EOP >try.c
+#include <stdio.h>
+int main() {
+ $uvtype u = 0;
+ int n = 8 * $uvsize;
+ int i;
+ for (i = 0; i < n; i++) {
+ u = u << 1 | ($uvtype)1;
+ if (($uvtype)($nvtype)u != u)
+ break;
+ }
+ printf("%d\n", i);
+ exit(0);
+}
+EOP
+ set try
+ if eval $compile; then
+ d_nv_preserves_uv_bits="`./try$exe_ext`"
+ fi
+ case "$d_nv_preserves_uv_bits" in
+ [1-9]*) $echo "Your NVs can preserve $d_nv_preserves_uv_bits bits of your UVs." 2>&1 ;;
+ *) $echo "Can't figure out how many bits your NVs preserve." 2>&1
+ d_nv_preserves_uv_bits="$undef"
+ ;;
+ esac
+ $rm -f try.* try
+ ;;
+esac
-: see if msgsnd exists
-set msgsnd d_msgsnd
-eval $inlibc
-: see if msgrcv exists
-set msgrcv d_msgrcv
-eval $inlibc
-: see how much of the 'msg*(2)' library is present.
-h_msg=true
+: check for off64_t
echo " "
-case "$d_msgctl$d_msgget$d_msgsnd$d_msgrcv" in
-*"$undef"*) h_msg=false;;
-esac
-case "$osname" in
-freebsd)
- case "`ipcs 2>&1`" in
- "SVID messages"*"not configured"*)
- echo "Your $osname does not have the msg*(2) configured." >&4
- h_msg=false
- val="$undef"
- set msgctl d_msgctl
- eval $setvar
- set msgget d_msgget
- eval $setvar
- set msgsnd d_msgsnd
- eval $setvar
- set msgrcv d_msgrcv
- eval $setvar
- ;;
- esac
- ;;
-esac
-: we could also check for sys/ipc.h ...
-if $h_msg && $test `./findhdr sys/msg.h`; then
- echo "You have the full msg*(2) library." >&4
+echo "Checking to see if you have off64_t..." >&4
+$cat >try.c <<EOCP
+#include <sys/types.h>
+#include <unistd.h>
+int main() { off64_t x = 7; }
+EOCP
+set try
+if eval $compile; then
val="$define"
+ echo "You have off64_t."
else
- echo "You don't have the full msg*(2) library." >&4
val="$undef"
+ echo "You do not have off64_t."
+ case "$lseeksize" in
+ 8) echo "(Your off_t is 64 bits, so you could use that.)" ;;
+ esac
fi
-set d_msg
+$rm -f try.* try
+set d_off64_t
eval $setvar
-: see if nice exists
-set nice d_nice
-eval $inlibc
-
: see if POSIX threads are available
set pthread.h i_pthread
eval $inhdr
;;
esac
-
-echo " "
-echo "Checking which 64-bit integer type we could use..." >&4
-
-case "$intsize" in
-8) val=int
- set quadtype
- eval $setvar
- val='"unsigned int"'
- set uquadtype
- eval $setvar
- quadkind=1
- ;;
-*) case "$longsize" in
- 8) val=long
- set quadtype
- eval $setvar
- val='"unsigned long"'
- set uquadtype
- eval $setvar
- quadkind=2
- ;;
- *) case "$uselonglong:$d_longlong:$longlongsize" in
- define:define:8)
- val='"long long"'
- set quadtype
- eval $setvar
- val='"unsigned long long"'
- set uquadtype
- eval $setvar
- quadkind=3
- ;;
- *) case "$d_int64t" in
- define)
- val=int64_t
- set quadtype
- eval $setvar
- val=uint64_t
- set uquadtype
- eval $setvar
- quadkind=4
- ;;
- esac
- ;;
- esac
- ;;
- esac
- ;;
-esac
-
-case "$quadtype" in
-'') case "$uselonglong:$d_longlong:$longlongsize" in
- undef:define:8)
- echo "(You would have 'long long', but you are not using it.)" >&4 ;;
- *) echo "Alas, no 64-bit integer types in sight." >&4 ;;
- esac
- d_quad="$undef"
- ;;
-*) if test X"$use64bits" = Xdefine -o X"$longsize" = X8; then
- verb="will"
- else
- verb="could"
- fi
- echo "We $verb use '$quadtype' for 64-bit integers." >&4
- d_quad="$define"
- ;;
-esac
-
: see if readdir and friends exist
set readdir d_readdir
eval $inlibc
set setpriority d_setprior
eval $inlibc
+: see if setproctitle exists
+set setproctitle d_setproctitle
+eval $inlibc
+
: see if setpwent exists
set setpwent d_setpwent
eval $inlibc
set setsid d_setsid
eval $inlibc
-: see if setspent exists
-set setspent d_setspent
-eval $inlibc
-
: see if setvbuf exists
set setvbuf d_setvbuf
eval $inlibc
eval $setvar
$rm -f try.c try
-: see if sqrtl exists
-set sqrtl d_sqrtl
-eval $inlibc
-
: see if sys/stat.h is available
set sys/stat.h i_sysstat
eval $inhdr
set strtol d_strtol
eval $inlibc
+: see if strtold exists
+set strtold d_strtold
+eval $inlibc
+
+: see if strtoll exists
+set strtoll d_strtoll
+eval $inlibc
+
+case "$d_longlong-$d_strtoll" in
+"$define-$define")
+ $cat <<EOM
+Checking whether your strtoll() works okay...
+EOM
+ $cat >try.c <<'EOCP'
+#include <errno.h>
+#ifdef __hpux
+#define strtoll __strtoll
+#endif
+#include <stdio.h>
+extern long long int strtoll(char *s, char **, int);
+static int bad = 0;
+int check(char *s, long long ell, int een) {
+ long long gll;
+ errno = 0;
+ gll = strtoll(s, 0, 10);
+ if (!((gll == ell) && (errno == een)))
+ bad++;
+}
+int main() {
+ check(" 1", 1LL, 0);
+ check(" 0", 0LL, 0);
+ check("-1", -1LL, 0);
+ check("-9223372036854775808", -9223372036854775808LL, 0);
+ check("-9223372036854775808", -9223372036854775808LL, 0);
+ check(" 9223372036854775807", 9223372036854775807LL, 0);
+ check("-9223372036854775808", -9223372036854775808LL, 0);
+ check(" 9223372036854775808", 9223372036854775807LL, ERANGE);
+ check("-9223372036854775809", -9223372036854775808LL, ERANGE);
+ if (!bad)
+ printf("ok\n");
+}
+EOCP
+ set try
+ if eval $compile; then
+ case "`./try`" in
+ ok) echo "Your strtoll() seems to be working okay." ;;
+ *) cat <<EOM >&4
+Your strtoll() doesn't seem to be working okay.
+EOM
+ d_strtoll="$undef"
+ ;;
+ esac
+ fi
+ ;;
+esac
+
: see if strtoul exists
set strtoul d_strtoul
eval $inlibc
set strtoull d_strtoull
eval $inlibc
+case "$d_longlong-$d_strtoull" in
+"$define-$define")
+ $cat <<EOM
+Checking whether your strtoull() works okay...
+EOM
+ $cat >try.c <<'EOCP'
+#include <errno.h>
+#ifdef __hpux
+#define strtoull __strtoull
+#endif
+#include <stdio.h>
+extern unsigned long long int strtoull(char *s, char **, int);
+static int bad = 0;
+int check(char *s, long long eull, int een) {
+ long long gull;
+ errno = 0;
+ gull = strtoull(s, 0, 10);
+ if (!((gull == eull) && (errno == een)))
+ bad++;
+}
+int main() {
+ check(" 1", 1LL, 0);
+ check(" 0", 0LL, 0);
+ check("18446744073709551615", 18446744073709551615ULL, 0);
+ check("18446744073709551616", 18446744073709551615ULL, ERANGE);
+ if (!bad)
+ printf("ok\n");
+}
+EOCP
+ set try
+ if eval $compile; then
+ case "`./try`" in
+ ok) echo "Your strtoull() seems to be working okay." ;;
+ *) cat <<EOM >&4
+Your strtoull() doesn't seem to be working okay.
+EOM
+ d_strtoull="$undef"
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+: see if strtouq exists
+set strtouq d_strtouq
+eval $inlibc
+
: see if strxfrm exists
set strxfrm d_strxfrm
eval $inlibc
esac
case "$osname" in
-next|rhapsody) multiarch="$define" ;;
+next|rhapsody|darwin) multiarch="$define" ;;
esac
case "$multiarch" in
''|[nN]*) multiarch="$undef" ;;
*)
case "$alignbytes" in
'') echo "Checking alignment constraints..." >&4
- $cat >try.c <<'EOCP'
+ if $test "X$uselongdouble" = Xdefine -a "X$d_longdbl" = Xdefine; then
+ $cat >try.c <<'EOCP'
+typedef long double NV;
+EOCP
+ else
+ $cat >try.c <<'EOCP'
+typedef double NV;
+EOCP
+ fi
+ $cat >>try.c <<'EOCP'
#include <stdio.h>
struct foobar {
char foo;
- double bar;
+ NV bar;
} try_algn;
int main()
{
esac
+: set the base revision
+baserev=5.0
+
: check for ordering of bytes in a long
echo " "
case "$crosscompile$multiarch" in
}
EOCP
set try
- if eval $compile && ./try; then
+ if eval $compile_ok && ./try; then
echo 'Looks OK.' >&4
else
echo "I can't use Berkeley DB with your <db.h>. I'll disable Berkeley DB." >&4
$rm -f core try.core core.try.*
case "$fflushNULL" in
x) $cat >&4 <<EOM
-Your fflush(NULL) works okay.
+Your fflush(NULL) works okay for output streams.
+Let's see if it clobbers input pipes...
+EOM
+# As of mid-March 2000 all versions of Solaris appear to have a stdio
+# bug that improperly flushes the input end of pipes. So we avoid the
+# autoflush on fork/system/exec support for now. :-(
+$cat >tryp.c <<EOCP
+#include <stdio.h>
+int
+main(int argc, char **argv)
+{
+ char buf[1024];
+ int i;
+ char *bp = buf;
+ while (1) {
+ while ((i = getc(stdin)) != -1
+ && (*bp++ = i) != '\n'
+ && bp < &buf[1024])
+ /* DO NOTHING */ ;
+ *bp = '\0';
+ fprintf(stdout, "%s", buf);
+ fflush(NULL);
+ if (i == -1)
+ return 0;
+ bp = buf;
+ }
+}
+EOCP
+ fflushNULL="$define"
+ set tryp
+ if eval $compile; then
+ $rm -f tryp.out
+ $cat tryp.c | ./tryp$exe_ext 2>/dev/null > tryp.out
+ if cmp tryp.c tryp.out >/dev/null 2>&1; then
+ $cat >&4 <<EOM
+fflush(NULL) seems to behave okay with input streams.
+EOM
+ fflushNULL="$define"
+ else
+ $cat >&4 <<EOM
+Ouch, fflush(NULL) clobbers input pipes! We will not use it.
EOM
- fflushNULL="$define"
+ fflushNULL="$undef"
+ fi
+ fi
+ $rm -f core tryp.c tryp.core core.tryp.*
;;
'') $cat >&4 <<EOM
Your fflush(NULL) isn't working (contrary to ANSI C).
fflushNULL="$undef"
;;
esac
-: check explicit looping only if NULL did not work
+: check explicit looping only if NULL did not work, and if the pipe
+: bug does not show up on an explicit flush too
case "$fflushNULL" in
"$undef")
- : check for fflush all behaviour
- case "$fflushall" in
- '') set try -DTRY_FFLUSH_ALL $output
- if eval $compile; then
- $cat >&4 <<EOM
-(Now testing the other method--but note that also this may fail.)
+ $cat >tryp.c <<EOCP
+#include <stdio.h>
+int
+main(int argc, char **argv)
+{
+ char buf[1024];
+ int i;
+ char *bp = buf;
+ while (1) {
+ while ((i = getc(stdin)) != -1
+ && (*bp++ = i) != '\n'
+ && bp < &buf[1024])
+ /* DO NOTHING */ ;
+ *bp = '\0';
+ fprintf(stdout, "%s", buf);
+ fflush(stdin);
+ if (i == -1)
+ return 0;
+ bp = buf;
+ }
+}
+EOCP
+ set tryp
+ if eval $compile; then
+ $rm -f tryp.out
+ $cat tryp.c | ./tryp$exe_ext 2>/dev/null > tryp.out
+ if cmp tryp.c tryp.out >/dev/null 2>&1; then
+ $cat >&4 <<EOM
+Good, at least fflush(stdin) seems to behave okay when stdin is a pipe.
+EOM
+ : now check for fflushall behaviour
+ case "$fflushall" in
+ '') set try -DTRY_FFLUSH_ALL $output
+ if eval $compile; then
+ $cat >&4 <<EOM
+(Now testing the other method--but note that this also may fail.)
EOM
- $rm -f try.out
- ./try$exe_ext 2>/dev/null
- if $test -s try.out -a "X$?" = X42; then
- fflushall="`$cat try.out`"
+ $rm -f try.out
+ ./try$exe_ext 2>/dev/null
+ if $test -s try.out -a "X$?" = X42; then
+ fflushall="`$cat try.out`"
+ fi
fi
- fi
- $rm -f core try.core core.try.*
- case "$fflushall" in
- x) $cat >&4 <<EOM
+ $rm -f core try.core core.try.*
+ case "$fflushall" in
+ x) $cat >&4 <<EOM
Whew. Flushing explicitly all the stdio streams works.
EOM
- fflushall="$define"
- ;;
- '') $cat >&4 <<EOM
+ fflushall="$define"
+ ;;
+ '') $cat >&4 <<EOM
Sigh. Flushing explicitly all the stdio streams doesn't work.
EOM
- fflushall="$undef"
- ;;
- *) $cat >&4 <<EOM
+ fflushall="$undef"
+ ;;
+ *) $cat >&4 <<EOM
Cannot figure out whether flushing stdio streams explicitly works or not.
I'm assuming it doesn't.
EOM
+ fflushall="$undef"
+ ;;
+ esac
+ ;;
+ "$define"|true|[yY]*)
+ fflushall="$define"
+ ;;
+ *)
fflushall="$undef"
;;
esac
- ;;
- "$define"|true|[yY]*)
- fflushall="$define"
- ;;
- *)
+ else
+ $cat >&4 <<EOM
+All is futile. Even fflush(stdin) clobbers input pipes!
+EOM
fflushall="$undef"
- ;;
- esac
+ fi
+ else
+ fflushall="$undef"
+ fi
+ $rm -f core tryp.c tryp.core core.tryp.*
;;
-*) fflushall="$undef"
+*) fflushall="$undef"
;;
esac
+
case "$fflushNULL$fflushall" in
undefundef)
$cat <<EOM
-I cannot figure out how to flush pending stdio output.
+OK, I give up. I cannot figure out how to flush pending stdio output.
+We won't be flushing handles at all before fork/exec/popen.
EOM
;;
esac
: see what type gids are declared as in the kernel
echo " "
-echo "Looking for the type for group ids returned by getgid()."
-set gid_t gidtype xxx stdio.h sys/types.h
-eval $typedef
-case "$gidtype" in
-xxx)
- xxx=`./findhdr sys/user.h`
- set `grep 'groups\[NGROUPS\];' "$xxx" 2>/dev/null` unsigned short
- case $1 in
- unsigned) dflt="$1 $2" ;;
- *) dflt="$1" ;;
- esac
- ;;
-*) dflt="$gidtype";;
-esac
-case "$gidtype" in
-gid_t) echo "gid_t found." ;;
-*) rp="What is the type for group ids returned by getgid()?"
- . ./myread
- gidtype="$ans"
- ;;
-esac
-
-echo " "
-case "$gidtype" in
-*_t) zzz="$gidtype" ;;
-*) zzz="gid" ;;
-esac
-echo "Checking the size of $zzz..." >&4
-cat > try.c <<EOCP
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- printf("%d\n", (int)sizeof($gidtype));
- exit(0);
-}
-EOCP
-set try
-if eval $compile_ok; then
- yyy=`./try`
- case "$yyy" in
- '') gidsize=4
- echo "(I can't execute the test program--guessing $gidsize.)" >&4
- ;;
- *) gidsize=$yyy
- echo "Your $zzz size is $gidsize bytes."
- ;;
- esac
-else
- gidsize=4
- echo "(I can't compile the test program--guessing $gidsize.)" >&4
-fi
-
-
-echo " "
-case "$gidtype" in
-*_t) zzz="$gidtype" ;;
-*) zzz="gid" ;;
-esac
-echo "Checking the sign of $zzz..." >&4
-cat > try.c <<EOCP
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- $gidtype foo = -1;
- if (foo < 0)
- printf("-1\n");
- else
- printf("1\n");
-}
-EOCP
-set try
-if eval $compile; then
- yyy=`./try`
- case "$yyy" in
- '') gidsign=1
- echo "(I can't execute the test program--guessing unsigned.)" >&4
- ;;
- *) gidsign=$yyy
- case "$gidsign" in
- 1) echo "Your $zzz is unsigned." ;;
- -1) echo "Your $zzz is signed." ;;
- esac
- ;;
- esac
-else
- gidsign=1
- echo "(I can't compile the test program--guessing unsigned.)" >&4
-fi
-
-
-: check for length of character
-echo " "
-case "$charsize" in
-'')
- echo "Checking to see how big your characters are (hey, you never know)..." >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", (int)sizeof(char));
- exit(0);
-}
-EOCP
- set try
- if eval $compile_ok; then
- dflt=`./try`
- else
- dflt='1'
- echo "(I can't seem to compile the test program. Guessing...)"
- fi
- ;;
-*)
- dflt="$charsize"
- ;;
-esac
-rp="What is the size of a character (in bytes)?"
-. ./myread
-charsize="$ans"
-$rm -f try.c try
-
-
-echo " "
-$echo "Choosing the C types to be used for Perl's internal types..." >&4
-
-case "$use64bits:$d_quad:$quadtype" in
-define:define:?*)
- ivtype="$quadtype"
- uvtype="$uquadtype"
- ivsize=8
- uvsize=8
- ;;
-*) ivtype="long"
- uvtype="unsigned long"
- ivsize=$longsize
- uvsize=$longsize
- ;;
-esac
-
-case "$uselongdouble:$d_longdbl" in
-define:define)
- nvtype="long double"
- nvsize=$longdblsize
- ;;
-*) nvtype=double
- nvsize=$doublesize
- ;;
-esac
-
-echo "(IV will be "$ivtype", $ivsize bytes)"
-echo "(UV will be "$uvtype", $uvsize bytes)"
-echo "(NV will be "$nvtype", $nvsize bytes)"
-
-$cat >try.c <<EOCP
-#$i_inttypes I_INTTYPES
-#ifdef I_INTTYPES
-#include <inttypes.h>
-#endif
-#include <stdio.h>
-int main() {
-#ifdef INT8
- int8_t i = INT8_MAX;
- uint8_t u = UINT8_MAX;
- printf("int8_t\n");
-#endif
-#ifdef INT16
- int16_t i = INT16_MAX;
- uint16_t i = UINT16_MAX;
- printf("int16_t\n");
-#endif
-#ifdef INT32
- int32_t i = INT32_MAX;
- uint32_t u = UINT32_MAX;
- printf("int32_t\n");
-#endif
-}
-EOCP
-
-case "$i8type" in
-'') case "$charsize" in
- 1) i8type=char
- u8type="unsigned char"
- i8size=$charsize
- u8size=$charsize
- ;;
- esac
- ;;
-esac
-case "$i8type" in
-'') set try -DINT8
- if eval $compile; then
- case "`./try$exe_ext`" in
- int8_t) i8type=int8_t
- u8type=uint8_t
- i8size=1
- u8size=1
- ;;
- esac
- fi
- ;;
-esac
-case "$i8type" in
-'') if $test $charsize -ge 1; then
- i8type=char
- u8type="unsigned char"
- i8size=$charsize
- u8size=$charsize
- fi
- ;;
-esac
-
-case "$i16type" in
-'') case "$shortsize" in
- 2) i16type=short
- u16type="unsigned short"
- i16size=$shortsize
- u16size=$shortsize
- ;;
- esac
- ;;
-esac
-case "$i16type" in
-'') set try -DINT16
- if eval $compile; then
- case "`./try$exe_ext`" in
- int16_t)
- i16type=int16_t
- u16type=uint16_t
- i16size=2
- u16size=2
- ;;
- esac
- fi
+echo "Looking for the type for group ids returned by getgid()."
+set gid_t gidtype xxx stdio.h sys/types.h
+eval $typedef
+case "$gidtype" in
+xxx)
+ xxx=`./findhdr sys/user.h`
+ set `grep 'groups\[NGROUPS\];' "$xxx" 2>/dev/null` unsigned short
+ case $1 in
+ unsigned) dflt="$1 $2" ;;
+ *) dflt="$1" ;;
+ esac
;;
+*) dflt="$gidtype";;
esac
-case "$i16type" in
-'') if $test $shortsize -ge 2; then
- i16type=short
- u16type="unsigned short"
- i16size=$shortsize
- u16size=$shortsize
- fi
+case "$gidtype" in
+gid_t) echo "gid_t found." ;;
+*) rp="What is the type for group ids returned by getgid()?"
+ . ./myread
+ gidtype="$ans"
;;
esac
-case "$i32type" in
-'') case "$longsize" in
- 4) i32type=long
- u32type="unsigned long"
- i32size=$longsize
- u32size=$longsize
+echo " "
+case "$gidtype" in
+*_t) zzz="$gidtype" ;;
+*) zzz="gid" ;;
+esac
+echo "Checking the size of $zzz..." >&4
+cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ printf("%d\n", (int)sizeof($gidtype));
+ exit(0);
+}
+EOCP
+set try
+if eval $compile_ok; then
+ yyy=`./try`
+ case "$yyy" in
+ '') gidsize=4
+ echo "(I can't execute the test program--guessing $gidsize.)" >&4
;;
- *) case "$intsize" in
- 4) i32type=int
- u32type="unsigned int"
- i32size=$intsize
- u32size=$intsize
- ;;
- esac
+ *) gidsize=$yyy
+ echo "Your $zzz is $gidsize bytes long."
;;
esac
- ;;
+else
+ gidsize=4
+ echo "(I can't compile the test program--guessing $gidsize.)" >&4
+fi
+
+
+echo " "
+case "$gidtype" in
+*_t) zzz="$gidtype" ;;
+*) zzz="gid" ;;
esac
-case "$i32type" in
-'') set try -DINT32
- if eval $compile; then
- case "`./try$exe_ext`" in
- int32_t)
- i32type=int32_t
- u32type=uint32_t
- i32size=4
- u32size=4
- ;;
+echo "Checking the sign of $zzz..." >&4
+cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ $gidtype foo = -1;
+ if (foo < 0)
+ printf("-1\n");
+ else
+ printf("1\n");
+}
+EOCP
+set try
+if eval $compile; then
+ yyy=`./try`
+ case "$yyy" in
+ '') gidsign=1
+ echo "(I can't execute the test program--guessing unsigned.)" >&4
+ ;;
+ *) gidsign=$yyy
+ case "$gidsign" in
+ 1) echo "Your $zzz is unsigned." ;;
+ -1) echo "Your $zzz is signed." ;;
esac
- fi
- ;;
-esac
-case "$i32type" in
-'') if $test $intsize -ge 4; then
- i32type=int
- u32type="unsigned int"
- i32size=$intsize
- u32size=$intsize
- fi
- ;;
-esac
-
-case "$i64type" in
-'') case "$d_quad:$quadtype" in
- define:?*)
- i64type="$quadtype"
- u64type="$uquadtype"
- i64size=8
- u64size=8
;;
esac
- ;;
-esac
+else
+ gidsign=1
+ echo "(I can't compile the test program--guessing unsigned.)" >&4
+fi
-$rm -f try.* try
echo " "
fi
fi
-if $test X"$sPRId64" = X -a X"$i_inttypes.h" = X"$define" -a X"$quadtype" = Xint64_t; then
+if $test X"$sPRId64" = X -a X"$i_inttypes" = X"$define" -a X"$quadtype" = Xint64_t; then
$cat >try.c <<'EOCP'
#include <sys/types.h>
#include <inttypes.h>
: Find earliest binary compatible site_perl subdirectory perl can use.
case "$bincompat5005" in
"$define") xs_apiversion='5.005' ;;
-*) xs_apiversion=$apiversion ;; # The current site_perl version.
+*) xs_apiversion=$version ;; # The current site_perl version.
esac
: Find earliest pure perl site_perl subdirectory perl can use.
: The versioned directories started at 5.005.
echo " "
case "$ptrsize" in
'')
- $echo $n "Checking to see how big your pointers are...$c" >&4
+ echo "Checking to see how big your pointers are..." >&4
if test "$voidflags" -gt 7; then
echo '#define VOID_PTR char *' > try.c
else
set try
if eval $compile_ok; then
ptrsize=`./try`
- $echo " $ptrsize bytes." >&4
+ echo "Your pointers are $ptrsize bytes long."
else
dflt='4'
echo "(I can't seem to compile the test program. Guessing...)" >&4
case "$selecttype" in
'') case "$d_select" in
$define)
+ echo " "
$cat <<EOM
Checking to see what type of arguments are accepted by select().
EOM
: Remove SIGSTKSIZE used by Linux.
: Remove SIGSTKSZ used by Posix.
: Remove SIGTYP void lines used by OS2.
-xxx=`echo '#include <signal.h>' |
+: Some cpps, like os390, dont give the file name anywhere
+if [ "X$fieldn" = X ]; then
+ : Just make some guesses. We check them later.
+ xxx='/usr/include/signal.h /usr/include/sys/signal.h'
+else
+ xxx=`echo '#include <signal.h>' |
$cppstdin $cppminus $cppflags 2>/dev/null |
$grep '^[ ]*#.*include' |
$awk "{print \\$$fieldn}" | $sed 's!"!!g' | $sort | $uniq`
+fi
: Check this list of files to be sure we have parsed the cpp output ok.
: This will also avoid potentially non-existent files, such
: as ../foo/bar.h
print substr($3, 4, 20)
}' $xxxfiles`
: Append some common names just in case the awk scan failed.
-xxx="$xxx ABRT ALRM BUS CHLD CLD CONT DIL EMT FPE HUP ILL INT IO IOT KILL"
-xxx="$xxx LOST PHONE PIPE POLL PROF PWR QUIT SEGV STKFLT STOP SYS TERM TRAP"
-xxx="$xxx TSTP TTIN TTOU URG USR1 USR2 USR3 USR4 VTALRM"
-xxx="$xxx WINCH WIND WINDOW XCPU XFSZ"
+xxx="$xxx ABRT ALRM BUS CANCEL CHLD CLD CONT DIL EMT FPE"
+xxx="$xxx FREEZE HUP ILL INT IO IOT KILL LOST LWP PHONE"
+xxx="$xxx PIPE POLL PROF PWR QUIT RTMAX RTMIN SEGV STKFLT STOP"
+xxx="$xxx SYS TERM THAW TRAP TSTP TTIN TTOU URG USR1 USR2"
+xxx="$xxx USR3 USR4 VTALRM WAITING WINCH WIND WINDOW XCPU XFSZ"
+
: generate a few handy files for later
$cat > signal.c <<'EOCP'
#include <sys/types.h>
}'
$rm -f signal signal.c signal.awk signal.lst signal_cmd
+echo " "
+case "$sizetype" in
+*_t) zzz="$sizetype" ;;
+*) zzz="filesize" ;;
+esac
+echo "Checking the size of $zzz..." >&4
+cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ printf("%d\n", (int)sizeof($sizetype));
+ exit(0);
+}
+EOCP
+set try
+if eval $compile_ok; then
+ yyy=`./try`
+ case "$yyy" in
+ '') sizesize=4
+ echo "(I can't execute the test program--guessing $sizesize.)" >&4
+ ;;
+ *) sizesize=$yyy
+ echo "Your $zzz size is $sizesize bytes."
+ ;;
+ esac
+else
+ sizesize=4
+ echo "(I can't compile the test program--guessing $sizesize.)" >&4
+fi
+
+
+: check for socklen_t
+echo " "
+echo "Checking to see if you have socklen_t..." >&4
+$cat >try.c <<EOCP
+#include <sys/types.h>
+#$d_socket HAS_SOCKET
+#ifdef HAS_SOCKET
+#include <sys/socket.h>
+#endif
+int main() { socklen_t x = 16; }
+EOCP
+set try
+if eval $compile; then
+ val="$define"
+ echo "You have socklen_t."
+else
+ val="$undef"
+ echo "You do not have socklen_t."
+ case "$sizetype" in
+ size_t) echo "(You do have size_t, that might work. Some people are happy with just an int.)" ;;
+ esac
+fi
+$rm -f try try.*
+set d_socklen_t
+eval $setvar
+
+: check for type of the size argument to socket calls
+case "$d_socket" in
+"$define")
+ $cat <<EOM
+
+Checking to see what type is the last argument of accept().
+EOM
+ hdrs="$define sys/types.h $d_socket sys/socket.h"
+ yyy=''
+ case "$d_socklen_t" in
+ "$define") yyy="$yyy socklen_t"
+ esac
+ yyy="$yyy $sizetype int long unsigned"
+ for xxx in $yyy; do
+ case "$socksizetype" in
+ '') try="extern int accept(int, struct sockaddr *, $xxx *);"
+ if ./protochk "$try" $hdrs; then
+ echo "Your system accepts '$xxx *' for the last argument of accept()."
+ socksizetype="$xxx"
+ fi
+ ;;
+ esac
+ done
+: In case none of those worked, prompt the user.
+ case "$socksizetype" in
+ '') rp='What is the type for socket address structure sizes?'
+ dflt='int'
+ . ./myread
+ socksizetype=$ans
+ ;;
+ esac
+ ;;
+*) : no sockets, so pick relatively harmless default
+ socksizetype='int'
+ ;;
+esac
+
: see what type is used for signed size_t
set ssize_t ssizetype int stdio.h sys/types.h
eval $typedef
echo "(I can't execute the test program--guessing $uidsize.)" >&4
;;
*) uidsize=$yyy
- echo "Your $zzz size is $uidsize bytes."
+ echo "Your $zzz is $uidsize bytes long."
;;
esac
else
set i_fcntl
eval $setvar
+: see if this is a iconv.h system
+set iconv.h i_iconv
+eval $inhdr
+
+: see if this is a ieeefp.h system
+set ieeefp.h i_ieeefp
+eval $inhdr
+
+: see if this is a libutil.h system
+set libutil.h i_libutil
+eval $inhdr
+
: see if locale.h is available
set locale.h i_locale
eval $inhdr
set poll.h i_poll
eval $inhdr
-: get C preprocessor symbols handy
+: see if this is a prot.h system
+set prot.h i_prot
+eval $inhdr
+
echo " "
-$echo $n "Hmm... $c"
-echo $al | $tr ' ' $trnl >Cppsym.know
-$cat <<EOSS >Cppsym
+$echo "Guessing which symbols your C compiler and preprocessor define..." >&4
+$cat <<'EOSH' > Cppsym.know
+a29k ABI64 aegis AES_SOURCE AIX AIX32 AIX370
+AIX41 AIX42 AIX43 AIX_SOURCE aixpc ALL_SOURCE
+alliant alpha am29000 AM29000 amiga AMIGAOS AMIX
+ansi ANSI_C_SOURCE apollo ardent atarist att386 att3b BeOS
+BIG_ENDIAN BIT_MSF bsd BSD bsd43 bsd4_2 bsd4_3 BSD4_3 bsd4_4
+BSD_4_3 BSD_4_4 BSD_NET2 BSD_TIME BSD_TYPES BSDCOMPAT bsdi
+bull c cadmus clipper CMU COFF COMPILER_VERSION
+concurrent convex cpu cray CRAY CRAYMPP ctix CX_UX
+CYGWIN DGUX DGUX_SOURCE DJGPP dmert DOLPHIN DPX2 DSO
+Dynix DynixPTX ELF encore EPI EXTENSIONS FILE_OFFSET_BITS
+FreeBSD GCC_NEW_VARARGS gcos gcx gimpel
+GNU_SOURCE GNUC GNUC_MINOR GO32 gould GOULD_PN
+H3050R H3050RX hbullx20 hcx host_mips
+hp200 hp300 hp700 HP700 hp800 hp9000
+hp9000s200 hp9000s300 hp9000s400 hp9000s500
+hp9000s700 hp9000s800 hp9k8 hp_osf hppa hpux HPUX_SOURCE
+i186 i286 i386 i486 i586 i686 i8086 i80960 i860 I960
+iAPX286 ibm ibm032 ibmesa IBMR2 ibmrt ILP32 ILP64
+INLINE_INTRINSICS INTRINSICS INT64 interdata is68k ksr1
+LANGUAGE_C LARGE_FILE_API LARGEFILE64_SOURCE
+LARGEFILE_SOURCE LFS64_LARGEFILE LFS_LARGEFILE
+Linux LITTLE_ENDIAN LONG64 LONG_DOUBLE LONG_LONG
+LONGDOUBLE LONGLONG LP64 luna luna88k Lynx
+M68000 m68k m88100 m88k M88KBCS_TARGET M_COFF
+M_I186 M_I286 M_I386 M_I8086 M_I86 M_I86SM M_SYS3
+M_SYS5 M_SYSIII M_SYSV M_UNIX M_XENIX MACH machine MachTen
+MATH_HAS_NO_SIDE_EFFECTS
+mc300 mc500 mc68000 mc68010 mc68020 mc68030 mc68040
+mc68060 mc68k mc68k32 mc700 mc88000 mc88100 merlin
+mert MiNT mips MIPS_FPSET MIPS_ISA MIPS_SIM MIPS_SZINT
+MIPS_SZLONG MIPS_SZPTR MIPSEB MIPSEL MODERN_C motorola
+mpeix MSDOS MTXINU MULTIMAX mvs MVS n16 ncl_el ncl_mr
+NetBSD news1500 news1700 news1800 news1900 news3700
+news700 news800 news900 NeXT NLS ns16000 ns32000
+ns32016 ns32332 ns32k nsc32000
+OCS88 OEMVS OpenBSD os OS2 OS390 osf OSF1 OSF_SOURCE
+pa_risc PA_RISC1_1 PA_RISC2_0 PARAGON parisc
+pc532 pdp11 PGC PIC plexus PORTAR posix
+POSIX1B_SOURCE POSIX2_SOURCE POSIX4_SOURCE
+POSIX_C_SOURCE POSIX_SOURCE POWER
+PROTOTYPES PWB pyr QNX R3000 REENTRANT RES Rhapsody RISC6000
+riscix riscos RT scs SCO sequent sgi SGI_SOURCE sinix
+SIZE_INT SIZE_LONG SIZE_PTR SOCKET_SOURCE SOCKETS_SOURCE
+sony sony_news sonyrisc sparc sparclite spectrum
+stardent stdc STDC_EXT stratos sun sun3 sun386
+Sun386i svr3 svr4 SVR4_2 SVR4_SOURCE svr5
+SX system SYSTYPE_BSD SYSTYPE_BSD43 SYSTYPE_BSD44
+SYSTYPE_SVR4 SYSTYPE_SVR5 SYSTYPE_SYSV SYSV SYSV3 SYSV4 SYSV5
+sysV68 sysV88 Tek4132 Tek4300 titan
+tower tower32 tower32_200 tower32_600 tower32_700
+tower32_800 tower32_850 tss
+u370 u3b u3b2 u3b20 u3b200 u3b20d u3b5
+ultrix UMAXV UnicomPBB UnicomPBD UNICOS UNICOSMK
+unix UNIX95 UNIX99 unixpc unos USGr4 USGr4_2
+Utek UTek UTS UWIN uxpm uxps vax venix VMESA vms xenix Xenix286
+XOPEN_SOURCE XOPEN_SOURCE_EXTENDED XPG2 XPG2_EXTENDED
+XPG3 XPG3_EXTENDED XPG4 XPG4_EXTENDED
+z8000
+EOSH
+# Maybe put other stuff here too.
+cat <<EOSH >>Cppsym.know
+$osname
+EOSH
+./tr '[a-z]' '[A-Z]' < Cppsym.know > Cppsym.a
+./tr '[A-Z]' '[a-z]' < Cppsym.know > Cppsym.b
+$cat Cppsym.know > Cppsym.c
+$cat Cppsym.a Cppsym.b Cppsym.c | $tr ' ' $trnl | sort | uniq > Cppsym.know
+$rm -f Cppsym.a Cppsym.b Cppsym.c
+cat <<EOSH > Cppsym
$startsh
-case "\$1" in
--l) list=true
- shift
- ;;
-esac
-unknown=''
-case "\$list\$#" in
-1|2)
- for sym do
- if $contains "^\$1$" Cppsym.true >/dev/null 2>&1; then
- exit 0
- elif $contains "^\$1$" Cppsym.know >/dev/null 2>&1; then
- :
- else
- unknown="\$unknown \$sym"
- fi
- done
- set X \$unknown
- shift
- ;;
-esac
-case \$# in
-0) exit 1;;
-esac
-echo \$* | $tr ' ' '$trnl' | $sed -e 's/\(.*\)/\\
-#ifdef \1\\
-exit 0; _ _ _ _\1\\ \1\\
-#endif\\
-/' >Cppsym\$\$
-echo "exit 1; _ _ _" >>Cppsym\$\$
-$cppstdin $cppminus <Cppsym\$\$ | $grep '^exit [01]; _ _' >Cppsym2\$\$
-case "\$list" in
-true) $awk 'NF > 5 {print substr(\$6,2,100)}' <Cppsym2\$\$ ;;
-*)
- sh Cppsym2\$\$
- status=\$?
- ;;
-esac
-$rm -f Cppsym\$\$ Cppsym2\$\$
-exit \$status
-EOSS
+if $test \$# -gt 0; then
+ echo \$* | $tr " " "$trnl" | ./Cppsym.try > Cppsym.got
+ if $test -s Cppsym.got; then
+ $rm -f Cppsym.got
+ exit 0
+ fi
+ $rm -f Cppsym.got
+ exit 1
+else
+ $tr " " "$trnl" | ./Cppsym.try
+ exit 0
+fi
+EOSH
chmod +x Cppsym
$eunicefix Cppsym
-./Cppsym -l $al | $sort | $grep -v '^$' >Cppsym.true
-
+cat <<EOSH > Cppsym.try
+$startsh
+cat <<'EOCP' > try.c
+#include <stdio.h>
+int main() {
+EOCP
+$awk \\
+EOSH
+cat <<'EOSH' >> Cppsym.try
+'length($1) > 0 {
+ printf "#ifdef %s\n#if %s+0\nprintf(\"%s=%%ld\\n\", %s);\n#else\nprintf(\"%s\\n\");\n#endif\n#endif\n", $1, $1, $1, $1, $1
+ printf "#ifdef _%s\n#if _%s+0\nprintf(\"_%s=%%ld\\n\", _%s);\n#else\nprintf(\"_%s\\n\");\n#endif\n#endif\n", $1, $1, $1, $1, $1
+ printf "#ifdef __%s\n#if __%s+0\nprintf(\"__%s=%%ld\\n\", __%s);\n#else\nprintf(\"__%s\\n\");\n#endif\n#endif\n", $1, $1, $1, $1, $1
+ printf "#ifdef __%s__\n#if __%s__+0\nprintf(\"__%s__=%%ld\\n\", __%s__);\n#else\nprintf(\"__%s__\\n\");\n#endif\n#endif\n", $1, $1, $1, $1, $1
+}' >> try.c
+echo '}' >> try.c
+EOSH
+cat <<EOSH >> Cppsym.try
+ccflags="$ccflags"
+case "$osname-$gccversion" in
+irix-) ccflags="\$ccflags -woff 1178" ;;
+os2-*) ccflags="\$ccflags -Zlinker /PM:VIO" ;;
+esac
+$cc $optimize \$ccflags $ldflags -o try try.c $libs && ./try$exe_ext
+EOSH
+chmod +x Cppsym.try
+$eunicefix Cppsym.try
+./Cppsym < Cppsym.know > Cppsym.true
: now check the C compiler for additional symbols
postprocess_cc_v=''
case "$osname" in
$awk '/\=/ { print $0; next }
{ print $0"=1" }' ccsym.raw >ccsym.list
-$awk '{ print $0"=1" }' Cppsym.true >ccsym.true
+$awk '/\=/ { print $0; next }
+ { print $0"=1" }' Cppsym.true >ccsym.true
$comm -13 ccsym.true ccsym.list >ccsym.own
$comm -12 ccsym.true ccsym.list >ccsym.com
$comm -23 ccsym.true ccsym.list >ccsym.cpp
else
if $test -s ccsym.com; then
echo "Your C compiler and pre-processor define these symbols:"
- $sed -e 's/\(.*\)=.*/\1/' ccsym.com
+ $sed -e 's/\(..*\)=.*/\1/' ccsym.com
also='also '
symbols='ones'
cppccsymbols=`$cat ccsym.com`
if $test -s ccsym.cpp; then
$test "$also" && echo " "
echo "Your C pre-processor ${also}defines the following symbols:"
- $sed -e 's/\(.*\)=.*/\1/' ccsym.cpp
+ $sed -e 's/\(..*\)=.*/\1/' ccsym.cpp
also='further '
cppsymbols=`$cat ccsym.cpp`
cppsymbols=`echo $cppsymbols`
if $test -s ccsym.own; then
$test "$also" && echo " "
echo "Your C compiler ${also}defines the following cpp symbols:"
- $sed -e 's/\(.*\)=1/\1/' ccsym.own
- $sed -e 's/\(.*\)=.*/\1/' ccsym.own | $uniq >>Cppsym.true
+ $sed -e 's/\(..*\)=1/\1/' ccsym.own
+ $sed -e 's/\(..*\)=.*/\1/' ccsym.own | $uniq >>Cppsym.true
ccsymbols=`$cat ccsym.own`
ccsymbols=`echo $ccsymbols`
$test "$silent" || sleep 1
fi
fi
-$rm -f ccsym*
+$rm -f ccsym* Cppsym.*
: see if this is a termio system
val="$undef"
set stddef.h i_stddef
eval $inhdr
+: see if this is a sunmath.h system
+set sunmath.h i_sunmath
+eval $inhdr
+
: see if sys/access.h is available
set sys/access.h i_sysaccess
eval $inhdr
set i_sysioctl
eval $setvar
+
+: see if this is a syslog.h system
+set syslog.h i_syslog
+eval $inhdr
+
+
+: see if this is a sys/mode.h system
+set sys/mode.h i_sysmode
+eval $inhdr
+
: see if sys/resource.h has to be included
set sys/resource.h i_sysresrc
eval $inhdr
set sys/un.h i_sysun
eval $inhdr
+
+: see if this is a sys/utsname.h system
+set sys/utsname.h i_sysutsname
+eval $inhdr
+
: see if this is a syswait system
set sys/wait.h i_syswait
eval $inhdr
;;
NDBM_File|ndbm_fil)
case "$i_ndbm" in
- $define) avail_ext="$avail_ext $xxx" ;;
+ $define)
+ case "$osname-$use64bitint" in
+ hpux-define)
+ case "$libs" in
+ *-lndbm*) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ *) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
esac
;;
ODBM_File|odbm_fil)
case "${i_dbm}${i_rpcsvcdbm}" in
- *"${define}"*) avail_ext="$avail_ext $xxx" ;;
+ *"${define}"*)
+ case "$osname-$use64bitint" in
+ hpux-define)
+ case "$libs" in
+ *-ldbm*) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ *) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
esac
;;
POSIX|posix)
true|$define|y) avail_ext="$avail_ext $xxx" ;;
esac
;;
+ Sys/Syslog|sys/syslog)
+ : XXX syslog requires socket
+ case "$d_socket" in
+ true|$define|y) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
Thread|thread)
case "$usethreads" in
true|$define|y) avail_ext="$avail_ext $xxx" ;;
alignbytes='$alignbytes'
ansi2knr='$ansi2knr'
aphostname='$aphostname'
-apiversion='$apiversion'
+api_revision='$api_revision'
+api_subversion='$api_subversion'
+api_version='$api_version'
+api_versionstring='$api_versionstring'
ar='$ar'
archlib='$archlib'
archlibexp='$archlibexp'
cccdlflags='$cccdlflags'
ccdlflags='$ccdlflags'
ccflags='$ccflags'
+ccflags_uselargefiles='$ccflags_uselargefiles'
ccsymbols='$ccsymbols'
cf_by='$cf_by'
cf_email='$cf_email'
d_endpent='$d_endpent'
d_endpwent='$d_endpwent'
d_endsent='$d_endsent'
-d_endspent='$d_endspent'
d_eofnblk='$d_eofnblk'
d_eunice='$d_eunice'
d_fchmod='$d_fchmod'
d_fork='$d_fork'
d_fpathconf='$d_fpathconf'
d_fpos64_t='$d_fpos64_t'
+d_frexpl='$d_frexpl'
d_fs_data_s='$d_fs_data_s'
d_fseeko='$d_fseeko'
d_fsetpos='$d_fsetpos'
d_fstatvfs='$d_fstatvfs'
d_ftello='$d_ftello'
d_ftime='$d_ftime'
+d_getcwd='$d_getcwd'
+d_getespwnam='$d_getespwnam'
+d_getfsstat='$d_getfsstat'
d_getgrent='$d_getgrent'
d_getgrps='$d_getgrps'
d_gethbyaddr='$d_gethbyaddr'
d_getppid='$d_getppid'
d_getprior='$d_getprior'
d_getprotoprotos='$d_getprotoprotos'
+d_getprpwnam='$d_getprpwnam'
d_getpwent='$d_getpwent'
d_getsbyname='$d_getsbyname'
d_getsbyport='$d_getsbyport'
d_getsent='$d_getsent'
d_getservprotos='$d_getservprotos'
-d_getspent='$d_getspent'
d_getspnam='$d_getspnam'
d_gettimeod='$d_gettimeod'
d_gnulibc='$d_gnulibc'
d_grpasswd='$d_grpasswd'
d_hasmntopt='$d_hasmntopt'
d_htonl='$d_htonl'
+d_iconv='$d_iconv'
d_index='$d_index'
d_inetaton='$d_inetaton'
-d_int64t='$d_int64t'
+d_int64_t='$d_int64_t'
d_isascii='$d_isascii'
+d_isnan='$d_isnan'
+d_isnanl='$d_isnanl'
d_killpg='$d_killpg'
d_lchown='$d_lchown'
d_ldbl_dig='$d_ldbl_dig'
d_lockf='$d_lockf'
d_longdbl='$d_longdbl'
d_longlong='$d_longlong'
+d_lseekproto='$d_lseekproto'
d_lstat='$d_lstat'
+d_madvise='$d_madvise'
d_mblen='$d_mblen'
d_mbstowcs='$d_mbstowcs'
d_mbtowc='$d_mbtowc'
d_memmove='$d_memmove'
d_memset='$d_memset'
d_mkdir='$d_mkdir'
+d_mkdtemp='$d_mkdtemp'
d_mkfifo='$d_mkfifo'
+d_mkstemp='$d_mkstemp'
+d_mkstemps='$d_mkstemps'
d_mktime='$d_mktime'
+d_mmap='$d_mmap'
+d_modfl='$d_modfl'
+d_mprotect='$d_mprotect'
d_msg='$d_msg'
d_msg_ctrunc='$d_msg_ctrunc'
d_msg_dontroute='$d_msg_dontroute'
d_msgget='$d_msgget'
d_msgrcv='$d_msgrcv'
d_msgsnd='$d_msgsnd'
+d_msync='$d_msync'
+d_munmap='$d_munmap'
d_mymalloc='$d_mymalloc'
d_nice='$d_nice'
+d_nv_preserves_uv='$d_nv_preserves_uv'
+d_nv_preserves_uv_bits='$d_nv_preserves_uv_bits'
d_off64_t='$d_off64_t'
d_old_pthread_create_joinable='$d_old_pthread_create_joinable'
d_oldpthreads='$d_oldpthreads'
d_open3='$d_open3'
d_pathconf='$d_pathconf'
d_pause='$d_pause'
+d_perl_otherlibdirs='$d_perl_otherlibdirs'
d_phostname='$d_phostname'
d_pipe='$d_pipe'
d_poll='$d_poll'
d_pwgecos='$d_pwgecos'
d_pwpasswd='$d_pwpasswd'
d_pwquota='$d_pwquota'
+d_qgcvt='$d_qgcvt'
d_quad='$d_quad'
d_readdir='$d_readdir'
d_readlink='$d_readlink'
d_setpgrp2='$d_setpgrp2'
d_setpgrp='$d_setpgrp'
d_setprior='$d_setprior'
+d_setproctitle='$d_setproctitle'
d_setpwent='$d_setpwent'
d_setregid='$d_setregid'
d_setresgid='$d_setresgid'
d_setruid='$d_setruid'
d_setsent='$d_setsent'
d_setsid='$d_setsid'
-d_setspent='$d_setspent'
d_setvbuf='$d_setvbuf'
d_sfio='$d_sfio'
d_shm='$d_shm'
d_sigaction='$d_sigaction'
d_sigsetjmp='$d_sigsetjmp'
d_socket='$d_socket'
+d_socklen_t='$d_socklen_t'
d_sockpair='$d_sockpair'
d_sqrtl='$d_sqrtl'
d_statblks='$d_statblks'
d_strerror='$d_strerror'
d_strtod='$d_strtod'
d_strtol='$d_strtol'
+d_strtold='$d_strtold'
+d_strtoll='$d_strtoll'
d_strtoul='$d_strtoul'
d_strtoull='$d_strtoull'
+d_strtouq='$d_strtouq'
d_strxfrm='$d_strxfrm'
d_suidsafe='$d_suidsafe'
d_symlink='$d_symlink'
d_uname='$d_uname'
d_union_semun='$d_union_semun'
d_ustat='$d_ustat'
+d_vendorarch='$d_vendorarch'
d_vendorbin='$d_vendorbin'
d_vendorlib='$d_vendorlib'
d_vfork='$d_vfork'
full_ar='$full_ar'
full_csh='$full_csh'
full_sed='$full_sed'
+gccosandvers='$gccosandvers'
gccversion='$gccversion'
gidformat='$gidformat'
gidsign='$gidsign'
i_float='$i_float'
i_gdbm='$i_gdbm'
i_grp='$i_grp'
+i_iconv='$i_iconv'
+i_ieeefp='$i_ieeefp'
i_inttypes='$i_inttypes'
+i_libutil='$i_libutil'
i_limits='$i_limits'
i_locale='$i_locale'
i_machcthr='$i_machcthr'
i_netinettcp='$i_netinettcp'
i_niin='$i_niin'
i_poll='$i_poll'
+i_prot='$i_prot'
i_pthread='$i_pthread'
i_pwd='$i_pwd'
i_rpcsvcdbm='$i_rpcsvcdbm'
i_stddef='$i_stddef'
i_stdlib='$i_stdlib'
i_string='$i_string'
+i_sunmath='$i_sunmath'
i_sysaccess='$i_sysaccess'
i_sysdir='$i_sysdir'
i_sysfile='$i_sysfile'
i_sysfilio='$i_sysfilio'
i_sysin='$i_sysin'
i_sysioctl='$i_sysioctl'
+i_syslog='$i_syslog'
+i_sysmman='$i_sysmman'
+i_sysmode='$i_sysmode'
i_sysmount='$i_sysmount'
i_sysndir='$i_sysndir'
i_sysparam='$i_sysparam'
i_systypes='$i_systypes'
i_sysuio='$i_sysuio'
i_sysun='$i_sysun'
+i_sysutsname='$i_sysutsname'
i_sysvfs='$i_sysvfs'
i_syswait='$i_syswait'
i_termio='$i_termio'
i_varhdr='$i_varhdr'
i_vfork='$i_vfork'
ignore_versioned_solibs='$ignore_versioned_solibs'
+inc_version_list='$inc_version_list'
+inc_version_list_init='$inc_version_list_init'
incpath='$incpath'
inews='$inews'
installarchlib='$installarchlib'
installsitelib='$installsitelib'
installstyle='$installstyle'
installusrbinperl='$installusrbinperl'
+installvendorarch='$installvendorarch'
installvendorbin='$installvendorbin'
installvendorlib='$installvendorlib'
intsize='$intsize'
ld='$ld'
lddlflags='$lddlflags'
ldflags='$ldflags'
+ldflags_uselargefiles='$ldflags_uselargefiles'
ldlibpthname='$ldlibpthname'
less='$less'
lib_ext='$lib_ext'
libperl='$libperl'
libpth='$libpth'
libs='$libs'
+libsdirs='$libsdirs'
+libsfiles='$libsfiles'
+libsfound='$libsfound'
+libspath='$libspath'
libswanted='$libswanted'
+libswanted_uselargefiles='$libswanted_uselargefiles'
line='$line'
lint='$lint'
lkflags='$lkflags'
medium='$medium'
mips_type='$mips_type'
mkdir='$mkdir'
+mmaptype='$mmaptype'
models='$models'
modetype='$modetype'
more='$more'
orderlib='$orderlib'
osname='$osname'
osvers='$osvers'
+otherlibdirs='$otherlibdirs'
package='$package'
pager='$pager'
passcat='$passcat'
patchlevel='$patchlevel'
path_sep='$path_sep'
+perl5='$perl5'
perl='$perl'
perladmin='$perladmin'
perlpath='$perlpath'
randseedtype='$randseedtype'
ranlib='$ranlib'
rd_nodata='$rd_nodata'
+revision='$revision'
rm='$rm'
rmail='$rmail'
runnm='$runnm'
sitebin='$sitebin'
sitebinexp='$sitebinexp'
sitelib='$sitelib'
+sitelib_stem='$sitelib_stem'
sitelibexp='$sitelibexp'
siteprefix='$siteprefix'
siteprefixexp='$siteprefixexp'
+sizesize='$sizesize'
sizetype='$sizetype'
sleep='$sleep'
smail='$smail'
so='$so'
sockethdr='$sockethdr'
socketlib='$socketlib'
+socksizetype='$socksizetype'
sort='$sort'
spackage='$spackage'
spitshell='$spitshell'
uname='$uname'
uniq='$uniq'
uquadtype='$uquadtype'
-use64bits='$use64bits'
+use5005threads='$use5005threads'
+use64bitall='$use64bitall'
+use64bitint='$use64bitint'
usedl='$usedl'
+useithreads='$useithreads'
uselargefiles='$uselargefiles'
uselongdouble='$uselongdouble'
-uselonglong='$uselonglong'
usemorebits='$usemorebits'
usemultiplicity='$usemultiplicity'
usemymalloc='$usemymalloc'
uvtype='$uvtype'
uvuformat='$uvuformat'
uvxformat='$uvxformat'
+vendorarch='$vendorarch'
+vendorarchexp='$vendorarchexp'
vendorbin='$vendorbin'
vendorbinexp='$vendorbinexp'
vendorlib='$vendorlib'
+vendorlib_stem='$vendorlib_stem'
vendorlibexp='$vendorlibexp'
vendorprefix='$vendorprefix'
vendorprefixexp='$vendorprefixexp'
projects / p5sagit/p5-mst-13.2.git / blobdiff