# $Id: Head.U,v 3.0.1.8 1995/07/25 13:40:02 ram Exp $
#
-# Generated on Thu Sep 12 09:42:56 EDT 1996 [metaconfig 3.0 PL60]
+# Generated on Tue Dec 17 14:33:33 EST 1996 [metaconfig 3.0 PL60]
cat >/tmp/c1$$ <<EOF
ARGGGHHHH!!!!!
: Proper PATH separator
p_=:
: On OS/2 this directory should exist if this is not floppy only system :-]
-if test -d c:/.; then
+if test -d c:/. -a -n "$OS2_SHELL"; then
p_=\;
PATH=`cmd /c "echo %PATH%" | tr '\\\\' / `
OS2_SHELL=`cmd /c "echo %OS2_SHELL%" | tr '\\\\' / | tr '[A-Z]' '[a-z]'`
bin=''
binexp=''
installbin=''
+bincompat3=''
+d_bincompat3=''
byteorder=''
cc=''
gccversion=''
d_flock=''
d_fork=''
d_fsetpos=''
+d_ftime=''
+d_gettimeod=''
d_Gconvert=''
d_getgrps=''
d_gethent=''
d_getpgrp=''
d_getppid=''
d_getprior=''
+d_gnulibc=''
d_htonl=''
+d_inetaton=''
d_isascii=''
d_killpg=''
d_link=''
d_rmdir=''
d_safebcpy=''
d_safemcpy=''
+d_sanemcmp=''
d_select=''
d_sem=''
d_semctl=''
d_strerror=''
d_sysernlst=''
d_syserrlst=''
+d_strtod=''
+d_strtol=''
+d_strtoul=''
d_strxfrm=''
d_symlink=''
d_syscall=''
loclibpth="$loclibpth /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib"
: general looking path for locating libraries
-glibpth="/lib/pa1.1 /usr/shlib /usr/lib/large /lib /usr/lib"
-glibpth="$glibpth $xlibpth /lib/large /usr/lib/small /lib/small"
-glibpth="$glibpth /usr/ccs/lib /usr/ucblib /usr/shlib"
+glibpth="/shlib /usr/shlib /lib/pa1.1 /usr/lib/large"
+glibpth="$glibpth /lib /usr/lib $xlibpth"
+glibpth="$glibpth /lib/large /usr/lib/small /lib/small"
+glibpth="$glibpth /usr/ccs/lib /usr/ucblib /usr/local/lib"
: Private path used by Configure to find libraries. Its value
: is prepended to libpth. This variable takes care of special
'') cat <<EOM >&2
$me: Fatal Error: I can't find a Bourne Shell anywhere.
Usually it's in /bin/sh. How did you even get this far?
-Please contact me (Andy Dougherty) at doughera@lafcol.lafayette.edu and
+Please contact me (Chip Salzenberg) at chip@atlantic.net and
we'll try to straigten this all out.
EOM
exit 1
You have the option of continuing the configuration process, despite the
distinct possibility that your kit is damaged, by typing 'y'es. If you
do, don't blame me if something goes wrong. I advise you to type 'n'o
-and contact the author (doughera@lafcol.lafayette.edu).
+and contact the author (chip@atlantic.net).
EOM
echo $n "Continue? [n] $c" >&4
Unix system. If despite that it blows up on yours, your best bet is to edit
Configure and run it again. If you can't run Configure for some reason,
you'll have to generate a config.sh file by hand. Whatever problems you
-have, let me (doughera@lafcol.lafayette.edu) know how I blew it.
+have, let me (chip@atlantic.net) know how I blew it.
This installation script affects things in two ways:
cd hints; ls -C *.sh | $sed 's/\.sh/ /g' >&4
dflt=''
: Half the following guesses are probably wrong... If you have better
- : tests or hints, please send them to doughera@lafcol.lafayette.edu
+ : tests or hints, please send them to chip@atlantic.net
: The metaconfig authors would also appreciate a copy...
$test -f /irix && osname=irix
$test -f /xenix && osname=sco_xenix
$test -f /dynix && osname=dynix
$test -f /dnix && osname=dnix
- $test -f /unicos && osname=unicos && osvers=`$uname -r`
+ $test -f /lynx.os && osname=lynxos
+ $test -f /unicos && osname=unicos && osvers=`$uname -r`
$test -f /bin/mips && /bin/mips && osname=mips
$test -d /NextApps && set X `hostinfo | grep 'NeXT Mach.*:' | \
$sed -e 's/://' -e 's/\./_/'` && osname=next && osvers=$4
uts) osname=uts
osvers="$3"
;;
+ qnx) osname=qnx
+ osvers="$4"
+ ;;
$2) case "$osname" in
*isc*) ;;
*freebsd*) ;;
- svr*)
+ svr*)
: svr4.x or possibly later
case "svr$3" in
${osname}*)
tarch=`arch`"-$osname"
elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
if uname -m > tmparch 2>&1 ; then
- tarch=`$sed -e 's/ /_/g' -e 's/$/'"-$osname/" tmparch`
+ tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
+ -e 's/$/'"-$osname/" tmparch`
else
tarch="$osname"
fi
fi
: set the base revision
-baserev=5.0
+baserev=5
: get the patchlevel
echo " "
patchlevel=0
subversion=0
fi
-echo "(You have $package $baserev patchlevel $patchlevel subversion $subversion.)"
+$echo $n "(You have $package" $c
+case "$package" in
+"*$baserev") ;;
+*) $echo $n " $baserev" $c ;;
+esac
+$echo $n " patchlevel $patchlevel" $c
+test 0 -eq "$subversion" || $echo $n " subversion $subversion" $c
+echo ".)"
: set the prefixup variable, to restore leading tilda escape
prefixup='case "$prefixexp" in
set dflt
eval $prefixup
;;
- *) version=`LC_ALL=C;export LC_ALL;\
- echo $baserev $patchlevel $subversion | \
- $awk '{print $1 + $2/1000.0 + $3/100000.0}'`
+ *) if test 0 -eq "$subversion"; then
+ version=`echo $baserev $patchlevel | \
+ $awk '{ printf "%d.%03d\n",$1,$2 }'`
+ else
+ version=`echo $baserev $patchlevel $subversion | \
+ $awk '{ printf "%d.%03d%02d\n",$1,$2,$3 }'`
+ fi
dflt="$privlib/$archname/$version"
;;
esac
*) eval "$var=$val";;
esac'
+$cat <<EOM
+
+Perl 5.004 can be compiled for binary compatibility with 5.003.
+If you decide to do so, you will be able to continue using any
+extensions that were compiled for Perl 5.003. However, binary
+compatibility forces Perl to expose some of its internal symbols
+in the same way that 5.003 did. So you may have symbol conflicts
+if you embed a binary-compatible Perl in other programs.
+
+EOM
+case "$d_bincompat3" in
+"$undef") dflt=n ;;
+*) dflt=y ;;
+esac
+rp='Binary compatibility with Perl 5.003?'
+. ./myread
+case "$ans" in
+y*) val="$define" ;;
+*) val="$undef" ;;
+esac
+set d_bincompat3
+eval $setvar
+case "$d_bincompat3" in
+"$define") bincompat3=y ;;
+*) bincompat3=n ;;
+esac
+
: make some quick guesses about what we are up against
echo " "
$echo $n "Hmm... $c"
*) libpth="$ans";;
esac
+: Define several unixisms. Hints files or command line options
+: can be used to override them.
+case "$ar" in
+'') ar='ar';;
+esac
+case "$lib_ext" in
+'') lib_ext='.a';;
+esac
+case "$obj_ext" in
+'') obj_ext='.o';;
+esac
+case "$path_sep" in
+'') path_sep=':';;
+esac
+: Which makefile gets called first. This is used by make depend.
+case "$firstmakefile" in
+'') firstmakefile='makefile';;
+esac
+
: compute shared library extension
case "$so" in
'')
*"-l$thislib "*);;
*) dflt="$dflt -l$thislib";;
esac
- elif xxx=`./loc lib$thislib.a X $libpth`; $test -f "$xxx"; then
+ elif xxx=`./loc lib$thislib$lib_ext X $libpth`; $test -f "$xxx"; then
echo "Found -l$thislib."
case " $dflt " in
*"-l$thislib "*);;
*) dflt="$dflt -l$thislib";;
esac
- elif xxx=`./loc $thislib.a X $libpth`; $test -f "$xxx"; then
+ elif xxx=`./loc $thislib$lib_ext X $libpth`; $test -f "$xxx"; then
echo "Found -l$thislib."
case " $dflt " in
*"-l$thislib "*);;
*) dflt="$dflt -l$thislib";;
esac
- elif xxx=`./loc lib${thislib}_s.a X $libpth`; $test -f "$xxx"; then
+ elif xxx=`./loc lib${thislib}_s$lib_ext X $libpth`; $test -f "$xxx"; then
echo "Found -l${thislib}_s."
case " $dflt " in
*"-l$thislib "*);;
*) dflt="$dflt -l${thislib}_s";;
esac
- elif xxx=`./loc Slib$thislib.a X $xlibpth`; $test -f "$xxx"; then
+ elif xxx=`./loc Slib$thislib$lib_ext X $xlibpth`; $test -f "$xxx"; then
echo "Found -l$thislib."
case " $dflt " in
*"-l$thislib "*);;
*) libs="$ans";;
esac
-: see if nm is to be used to determine whether a symbol is defined or not
-case "$usenm" in
-'')
- dflt=`egrep 'inlibc|csym' ../Configure | wc -l 2>/dev/null`
- if $test $dflt -gt 20; then
- dflt=y
+: see how we invoke the C preprocessor
+echo " "
+echo "Now, how can we feed standard input to your C preprocessor..." >&4
+cat <<'EOT' >testcpp.c
+#define ABC abc
+#define XYZ xyz
+ABC.XYZ
+EOT
+cd ..
+echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
+chmod 755 cppstdin
+wrapper=`pwd`/cppstdin
+ok='false'
+cd UU
+
+if $test "X$cppstdin" != "X" && \
+ $cppstdin $cppminus <testcpp.c >testcpp.out 2>&1 && \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+then
+ echo "You used to use $cppstdin $cppminus so we'll use that again."
+ case "$cpprun" in
+ '') echo "But let's see if we can live without a wrapper..." ;;
+ *)
+ if $cpprun $cpplast <testcpp.c >testcpp.out 2>&1 && \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+ then
+ echo "(And we'll use $cpprun $cpplast to preprocess directly.)"
+ ok='true'
+ else
+ echo "(However, $cpprun $cpplast does not work, let's see...)"
+ fi
+ ;;
+ esac
+else
+ case "$cppstdin" in
+ '') ;;
+ *)
+ echo "Good old $cppstdin $cppminus does not seem to be of any help..."
+ ;;
+ esac
+fi
+
+if $ok; then
+ : nothing
+elif echo 'Maybe "'"$cc"' -E" will work...'; \
+ $cc -E <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yup, it does."
+ x_cpp="$cc -E"
+ x_minus='';
+elif echo 'Nope...maybe "'"$cc"' -E -" will work...'; \
+ $cc -E - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yup, it does."
+ x_cpp="$cc -E"
+ x_minus='-';
+elif echo 'Nope...maybe "'"$cc"' -P" will work...'; \
+ $cc -P <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yipee, that works!"
+ x_cpp="$cc -P"
+ x_minus='';
+elif echo 'Nope...maybe "'"$cc"' -P -" will work...'; \
+ $cc -P - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "At long last!"
+ x_cpp="$cc -P"
+ x_minus='-';
+elif echo 'No such luck, maybe "'$cpp'" will work...'; \
+ $cpp <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "It works!"
+ x_cpp="$cpp"
+ x_minus='';
+elif echo 'Nixed again...maybe "'$cpp' -" will work...'; \
+ $cpp - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Hooray, it works! I was beginning to wonder."
+ x_cpp="$cpp"
+ x_minus='-';
+elif echo 'Uh-uh. Time to get fancy. Trying a wrapper...'; \
+ $wrapper <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ x_cpp="$wrapper"
+ x_minus=''
+ echo "Eureka!"
+else
+ dflt=''
+ rp="No dice. I can't find a C preprocessor. Name one:"
+ . ./myread
+ x_cpp="$ans"
+ x_minus=''
+ $x_cpp <testcpp.c >testcpp.out 2>&1
+ if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "OK, that will do." >&4
else
- dflt=n
+echo "Sorry, I can't get that to work. Go find one and rerun Configure." >&4
+ exit 1
fi
- ;;
-*)
- case "$usenm" in
- true) dflt=y;;
- *) dflt=n;;
+fi
+
+case "$ok" in
+false)
+ cppstdin="$x_cpp"
+ cppminus="$x_minus"
+ cpprun="$x_cpp"
+ cpplast="$x_minus"
+ set X $x_cpp
+ shift
+ case "$1" in
+ "$cpp")
+ echo "Perhaps can we force $cc -E using a wrapper..."
+ if $wrapper <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+ then
+ echo "Yup, we can."
+ cppstdin="$wrapper"
+ cppminus='';
+ else
+ echo "Nope, we'll have to live without it..."
+ fi
+ ;;
+ esac
+ case "$cpprun" in
+ "$wrapper")
+ cpprun=''
+ cpplast=''
+ ;;
esac
;;
esac
-$cat <<EOM
-
-I can use 'nm' to extract the symbols from your C libraries. This is a time
-consuming task which may generate huge output on the disk (up to 3 megabytes)
-but that should make the symbols extraction faster. The alternative is to skip
-the 'nm' extraction part and to compile a small test program instead to
-determine whether each symbol is present. If you have a fast C compiler and/or
-if your 'nm' output cannot be parsed, this may be the best solution.
-EOM
-rp='Shall I use nm to extract C symbols from the libraries?'
-. ./myread
-case "$ans" in
-n|N) usenm=false;;
-*) usenm=true;;
+case "$cppstdin" in
+"$wrapper") ;;
+*) $rm -f $wrapper;;
esac
+$rm -f testcpp.c testcpp.out
-runnm=$usenm
-case "$reuseval" in
-true) runnm=false;;
+: determine optimize, if desired, or use for debug flag also
+case "$optimize" in
+' ') dflt='none';;
+'') dflt='-O';;
+*) dflt="$optimize";;
esac
+$cat <<EOH
-: nm options which may be necessary
-case "$nm_opt" in
-'') if $test -f /mach_boot; then
- nm_opt=''
- elif $test -d /usr/ccs/lib; then
- nm_opt='-p'
- elif $test -f /dgux; then
- nm_opt='-p'
- else
- nm_opt=''
- fi;;
+Some C compilers have problems with their optimizers. By default, $package
+compiles with the -O flag to use the optimizer. Alternately, you might want
+to use the symbolic debugger, which uses the -g flag (on traditional Unix
+systems). Either flag can be specified here. To use neither flag, specify
+the word "none".
+
+EOH
+rp="What optimizer/debugger flag should be used?"
+. ./myread
+optimize="$ans"
+case "$optimize" in
+'none') optimize=" ";;
esac
-: nm options which may be necessary for shared libraries but illegal
-: for archive libraries. Thank you, Linux.
-case "$nm_so_opt" in
-'') case "$myuname" in
- *linux*)
- if nm --help | $grep 'dynamic' > /dev/null 2>&1; then
- nm_so_opt='--dynamic'
+dflt=''
+: We will not override a previous value, but we might want to
+: augment a hint file
+case "$hint" in
+none|recommended)
+ case "$gccversion" in
+ 1*) dflt='-fpcc-struct-return' ;;
+ esac
+ case "$optimize" in
+ *-g*) dflt="$dflt -DDEBUGGING";;
+ esac
+ case "$gccversion" in
+ 2*) if test -d /etc/conf/kconfig.d &&
+ $contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
+ then
+ dflt="$dflt -posix"
fi
;;
esac
;;
esac
-case "$runnm" in
-true)
-: get list of predefined functions in a handy place
-echo " "
-case "$libc" in
-'') libc=unknown
- case "$libs" in
- *-lc_s*) libc=`./loc libc_s.a $libc $libpth`
- esac
- ;;
-esac
-libnames='';
-case "$libs" in
-'') ;;
-*) for thislib in $libs; do
- case "$thislib" in
- -lc|-lc_s)
- : Handle C library specially below.
- ;;
- -l*)
- thislib=`echo $thislib | $sed -e 's/^-l//'`
- if try=`./loc lib$thislib.$so.'*' X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib.$so X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib.a X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc $thislib X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc Slib$thislib.a X $xlibpth`; $test -f "$try"; then
- :
- else
- try=''
- fi
- libnames="$libnames $try"
- ;;
- *) libnames="$libnames $thislib" ;;
- esac
- done
- ;;
-esac
-xxx=normal
-case "$libc" in
-unknown)
- set /lib/libc.$so
- for xxx in $libpth; do
- $test -r $1 || set $xxx/libc.$so
- : The messy sed command sorts on library version numbers.
- $test -r $1 || \
- set `echo blurfl; echo $xxx/libc.$so.[0-9]* | \
- tr ' ' '\012' | egrep -v '\.[A-Za-z]*$' | $sed -e '
- h
- s/[0-9][0-9]*/0000&/g
- s/0*\([0-9][0-9][0-9][0-9][0-9]\)/\1/g
- G
- s/\n/ /' | \
- sort | $sed -e 's/^.* //'`
- eval set \$$#
- done
- $test -r $1 || set /usr/ccs/lib/libc.$so
- $test -r $1 || set /lib/libsys_s.a
- ;;
-*)
- set blurfl
- ;;
-esac
-if $test -r "$1"; then
- echo "Your (shared) C library seems to be in $1."
- libc="$1"
-elif $test -r /lib/libc && $test -r /lib/clib; then
- echo "Your C library seems to be in both /lib/clib and /lib/libc."
- xxx=apollo
- libc='/lib/clib /lib/libc'
- if $test -r /lib/syslib; then
- echo "(Your math library is in /lib/syslib.)"
- libc="$libc /lib/syslib"
- fi
-elif $test -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
- echo "Your C library seems to be in $libc, as you said before."
-elif $test -r $incpath/usr/lib/libc.a; then
- libc=$incpath/usr/lib/libc.a;
- echo "Your C library seems to be in $libc. That's fine."
-elif $test -r /lib/libc.a; then
- libc=/lib/libc.a;
- echo "Your C library seems to be in $libc. You're normal."
-else
- if tans=`./loc libc.a blurfl/dyick $libpth`; $test -r "$tans"; then
- :
- elif tans=`./loc libc blurfl/dyick $libpth`; $test -r "$tans"; then
- libnames="$libnames "`./loc clib blurfl/dyick $libpth`
- elif tans=`./loc clib blurfl/dyick $libpth`; $test -r "$tans"; then
- :
- elif tans=`./loc Slibc.a blurfl/dyick $xlibpth`; $test -r "$tans"; then
- :
- elif tans=`./loc Mlibc.a blurfl/dyick $xlibpth`; $test -r "$tans"; then
- :
- else
- tans=`./loc Llibc.a blurfl/dyick $xlibpth`
- fi
- if $test -r "$tans"; then
- echo "Your C library seems to be in $tans, of all places."
- libc=$tans
- else
- libc='blurfl'
- fi
-fi
-if $test $xxx = apollo -o -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
- dflt="$libc"
- cat <<EOM
-
-If the guess above is wrong (which it might be if you're using a strange
-compiler, or your machine supports multiple models), you can override it here.
-
-EOM
-else
- dflt=''
- echo $libpth | tr ' ' '\012' | sort | uniq > libpath
- cat >&4 <<EOM
-I can't seem to find your C library. I've looked in the following places:
-
-EOM
- $sed 's/^/ /' libpath
- cat <<EOM
-
-None of these seems to contain your C library. I need to get its name...
-
-EOM
-fi
-fn=f
-rp='Where is your C library?'
-. ./getfile
-libc="$ans"
-
-echo " "
-echo $libc $libnames | tr ' ' '\012' | sort | uniq > libnames
-set X `cat libnames`
-shift
-xxx=files
-case $# in 1) xxx=file; esac
-echo "Extracting names from the following $xxx for later perusal:" >&4
-echo " "
-$sed 's/^/ /' libnames >&4
-echo " "
-$echo $n "This may take a while...$c" >&4
-
-: Linux may need the special Dynamic option to nm for shared libraries.
-: In general, this is stored in the nm_so_opt variable.
-: Unfortunately, that option may be fatal on non-shared libraries.
-for nm_libs_ext in $*; do
- case $nm_libs_ext in
- *$so*) nm $nm_so_opt $nm_opt $nm_libs_ext 2>/dev/null ;;
- *) nm $nm_opt $nm_libs_ext 2>/dev/null ;;
- esac
-done > libc.tmp
-
-$echo $n ".$c"
-$grep fprintf libc.tmp > libc.ptf
-xscan='eval "<libc.ptf $com >libc.list"; $echo $n ".$c" >&4'
-xrun='eval "<libc.tmp $com >libc.list"; echo "done" >&4'
-xxx='[ADTSIW]'
-if com="$sed -n -e 's/__IO//' -e 's/^.* $xxx *_[_.]*//p' -e 's/^.* $xxx *//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^__*//' -e 's/^\([a-zA-Z_0-9$]*\).*xtern.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e '/|UNDEF/d' -e '/FUNC..GL/s/^.*|__*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.* D __*//p' -e 's/^.* D //p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^_//' -e 's/^\([a-zA-Z_0-9]*\).*xtern.*text.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$grep '|' | $sed -n -e '/|COMMON/d' -e '/|DATA/d' \
- -e '/ file/d' -e 's/^\([^ ]*\).*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p' -e 's/^.*|FUNC |WEAK .*|//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^__//' -e '/|Undef/d' -e '/|Proc/s/ .*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e '/Def. Text/s/.* \([^ ]*\)\$/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^[-0-9a-f ]*_\(.*\)=.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-else
- nm -p $* 2>/dev/null >libc.tmp
- $grep fprintf libc.tmp > libc.ptf
- if com="$sed -n -e 's/^.* [ADTSIW] *_[_.]*//p' -e 's/^.* [ADTSIW] //p'";\
- eval $xscan; $contains '^fprintf$' libc.list >/dev/null 2>&1
- then
- nm_opt='-p'
- eval $xrun
- else
- echo " "
- echo "nm didn't seem to work right. Trying ar instead..." >&4
- com=''
- if ar t $libc > libc.tmp; then
- for thisname in $libnames; do
- ar t $thisname >>libc.tmp
- done
- $sed -e 's/\.o$//' < libc.tmp > libc.list
- echo "Ok." >&4
- else
- echo "ar didn't seem to work right." >&4
- echo "Maybe this is a Cray...trying bld instead..." >&4
- if bld t $libc | $sed -e 's/.*\///' -e 's/\.o:.*$//' > libc.list
- then
- for thisname in $libnames; do
- bld t $libnames | \
- $sed -e 's/.*\///' -e 's/\.o:.*$//' >>libc.list
- ar t $thisname >>libc.tmp
- done
- echo "Ok." >&4
- else
- echo "That didn't work either. Giving up." >&4
- exit 1
- fi
- fi
- fi
-fi
-nm_extract="$com"
-if $test -f /lib/syscalls.exp; then
- echo " "
- echo "Also extracting names from /lib/syscalls.exp for good ole AIX..." >&4
- $sed -n 's/^\([^ ]*\)[ ]*syscall$/\1/p' /lib/syscalls.exp >>libc.list
-fi
-;;
-esac
-$rm -f libnames libpath
-
-: Define several unixisms. Hints files or command line options
-: can be used to override them.
-case "$ar" in
-'') ar='ar';;
-esac
-case "$lib_ext" in
-'') lib_ext='.a';;
-esac
-case "$obj_ext" in
-'') obj_ext='.o';;
-esac
-case "$path_sep" in
-'') path_sep=':';;
-esac
-: Which makefile gets called first. This is used by make depend.
-case "$firstmakefile" in
-'') firstmakefile='makefile';;
-esac
-
-: see how we invoke the C preprocessor
-echo " "
-echo "Now, how can we feed standard input to your C preprocessor..." >&4
-cat <<'EOT' >testcpp.c
-#define ABC abc
-#define XYZ xyz
-ABC.XYZ
-EOT
-cd ..
-echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
-chmod 755 cppstdin
-wrapper=`pwd`/cppstdin
-ok='false'
-cd UU
-
-if $test "X$cppstdin" != "X" && \
- $cppstdin $cppminus <testcpp.c >testcpp.out 2>&1 && \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
-then
- echo "You used to use $cppstdin $cppminus so we'll use that again."
- case "$cpprun" in
- '') echo "But let's see if we can live without a wrapper..." ;;
- *)
- if $cpprun $cpplast <testcpp.c >testcpp.out 2>&1 && \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
- then
- echo "(And we'll use $cpprun $cpplast to preprocess directly.)"
- ok='true'
- else
- echo "(However, $cpprun $cpplast does not work, let's see...)"
- fi
- ;;
- esac
-else
- case "$cppstdin" in
- '') ;;
- *)
- echo "Good old $cppstdin $cppminus does not seem to be of any help..."
- ;;
- esac
-fi
-
-if $ok; then
- : nothing
-elif echo 'Maybe "'"$cc"' -E" will work...'; \
- $cc -E <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yup, it does."
- x_cpp="$cc -E"
- x_minus='';
-elif echo 'Nope...maybe "'"$cc"' -E -" will work...'; \
- $cc -E - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yup, it does."
- x_cpp="$cc -E"
- x_minus='-';
-elif echo 'Nope...maybe "'"$cc"' -P" will work...'; \
- $cc -P <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yipee, that works!"
- x_cpp="$cc -P"
- x_minus='';
-elif echo 'Nope...maybe "'"$cc"' -P -" will work...'; \
- $cc -P - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "At long last!"
- x_cpp="$cc -P"
- x_minus='-';
-elif echo 'No such luck, maybe "'$cpp'" will work...'; \
- $cpp <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "It works!"
- x_cpp="$cpp"
- x_minus='';
-elif echo 'Nixed again...maybe "'$cpp' -" will work...'; \
- $cpp - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Hooray, it works! I was beginning to wonder."
- x_cpp="$cpp"
- x_minus='-';
-elif echo 'Uh-uh. Time to get fancy. Trying a wrapper...'; \
- $wrapper <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- x_cpp="$wrapper"
- x_minus=''
- echo "Eureka!"
-else
- dflt=''
- rp="No dice. I can't find a C preprocessor. Name one:"
- . ./myread
- x_cpp="$ans"
- x_minus=''
- $x_cpp <testcpp.c >testcpp.out 2>&1
- if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "OK, that will do." >&4
- else
-echo "Sorry, I can't get that to work. Go find one and rerun Configure." >&4
- exit 1
- fi
-fi
-
-case "$ok" in
-false)
- cppstdin="$x_cpp"
- cppminus="$x_minus"
- cpprun="$x_cpp"
- cpplast="$x_minus"
- set X $x_cpp
- shift
- case "$1" in
- "$cpp")
- echo "Perhaps can we force $cc -E using a wrapper..."
- if $wrapper <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
- then
- echo "Yup, we can."
- cppstdin="$wrapper"
- cppminus='';
- else
- echo "Nope, we'll have to live without it..."
- fi
- ;;
- esac
- case "$cpprun" in
- "$wrapper")
- cpprun=''
- cpplast=''
- ;;
- esac
- ;;
-esac
-
-case "$cppstdin" in
-"$wrapper") ;;
-*) $rm -f $wrapper;;
-esac
-$rm -f testcpp.c testcpp.out
-
-: determine optimize, if desired, or use for debug flag also
-case "$optimize" in
-' ') dflt='none';;
-'') dflt='-O';;
-*) dflt="$optimize";;
-esac
-$cat <<EOH
-
-Some C compilers have problems with their optimizers. By default, $package
-compiles with the -O flag to use the optimizer. Alternately, you might want
-to use the symbolic debugger, which uses the -g flag (on traditional Unix
-systems). Either flag can be specified here. To use neither flag, specify
-the word "none".
-
-EOH
-rp="What optimizer/debugger flag should be used?"
-. ./myread
-optimize="$ans"
-case "$optimize" in
-'none') optimize=" ";;
-esac
-
-dflt=''
-: We will not override a previous value, but we might want to
-: augment a hint file
-case "$hint" in
-none|recommended)
- case "$gccversion" in
- 1*) dflt='-fpcc-struct-return' ;;
- esac
- case "$optimize" in
- *-g*) dflt="$dflt -DDEBUGGING";;
- esac
- case "$gccversion" in
- 2*) if test -d /etc/conf/kconfig.d &&
- $contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- then
- dflt="$dflt -posix"
- fi
- ;;
- esac
- ;;
-esac
-
-case "$mips_type" in
-*BSD*|'') inclwanted="$locincpth $usrinc";;
-*) inclwanted="$locincpth $inclwanted $usrinc/bsd";;
+case "$mips_type" in
+*BSD*|'') inclwanted="$locincpth $usrinc";;
+*) inclwanted="$locincpth $inclwanted $usrinc/bsd";;
esac
for thisincl in $inclwanted; do
if $test -d $thisincl; then
else
set signal.h LANGUAGE_C; eval $inctest
fi
-set signal.h NO_PROTOTYPE; eval $inctest
set signal.h _NO_PROTO; eval $inctest
case "$hint" in
cppflags="$cppflags $ftry"
previous=''
else
- previous="$flag"
+ previous="$flag"
+ fi
+ done
+ set X $cppflags
+ shift
+ cppflags=${1+"$@"}
+ case "$cppflags" in
+ *-*) echo "They appear to be: $cppflags";;
+ esac
+ $rm -f cpp.c cpp?.out
+ ;;
+esac
+
+: flags used in final linking phase
+
+case "$ldflags" in
+'') if ./venix; then
+ dflt='-i -z'
+ else
+ dflt=''
+ fi
+ case "$ccflags" in
+ *-posix*) dflt="$dflt -posix" ;;
+ esac
+ ;;
+*) dflt="$ldflags";;
+esac
+
+: Try to guess additional flags to pick up local libraries.
+for thislibdir in $libpth; do
+ case " $loclibpth " in
+ *" $thislibdir "*)
+ case "$dflt " in
+ *"-L$thislibdir "*) ;;
+ *) dflt="$dflt -L$thislibdir" ;;
+ esac
+ ;;
+ esac
+done
+
+case "$dflt" in
+'') dflt='none' ;;
+esac
+
+$cat <<EOH
+
+Your C linker may need flags. For this question you should
+include -L/whatever and any other flags used by the C linker, but you
+should NOT include libraries like -lwhatever.
+
+Make sure you include the appropriate -L/path flags if your C linker
+does not normally search all of the directories you specified above,
+namely
+ $libpth
+To use no flags, specify the word "none".
+
+EOH
+
+rp="Any additional ld flags (NOT including libraries)?"
+. ./myread
+case "$ans" in
+none) ldflags='';;
+*) ldflags="$ans";;
+esac
+rmlist="$rmlist pdp11"
+
+: coherency check
+echo " "
+echo "Checking your choice of C compiler and flags for coherency..." >&4
+set X $cc $optimize $ccflags $ldflags try.c -o try
+shift
+$cat >try.msg <<EOM
+I've tried to compile and run a simple program with:
+
+ $*
+ ./try
+
+and I got the following output:
+
+EOM
+$cat > try.c <<'EOF'
+#include <stdio.h>
+main() { exit(0); }
+EOF
+dflt=y
+if sh -c "$cc $optimize $ccflags try.c -o try $ldflags" >>try.msg 2>&1; then
+ if sh -c './try' >>try.msg 2>&1; then
+ dflt=n
+ else
+ echo "The program compiled OK, but exited with status $?." >>try.msg
+ rp="You have a problem. Shall I abort Configure"
+ dflt=y
+ fi
+else
+ echo "I can't compile the test program." >>try.msg
+ rp="You have a BIG problem. Shall I abort Configure"
+ dflt=y
+fi
+case "$dflt" in
+y)
+ $cat try.msg
+ case "$knowitall" in
+ '')
+ echo "(The supplied flags might be incorrect with this C compiler.)"
+ ;;
+ *) dflt=n;;
+ esac
+ echo " "
+ . ./myread
+ case "$ans" in
+ n*|N*) ;;
+ *) echo "Ok. Stopping Configure." >&4
+ exit 1
+ ;;
+ esac
+ ;;
+n) echo "OK, that should do.";;
+esac
+$rm -f try try.* core
+
+echo " "
+echo "Checking for GNU C Library..." >&4
+cat >gnulibc.c <<EOM
+int
+main()
+{
+ return __libc_main();
+}
+EOM
+if $cc $ccflags $ldflags -o gnulibc gnulibc.c $libs >/dev/null 2>&1 && \
+ ./gnulibc | $contains '^GNU C Library' >/dev/null 2>&1; then
+ val="$define"
+ echo "You are using the GNU C Library"
+else
+ val="$undef"
+ echo "You are not using the GNU C Library"
+fi
+$rm -f gnulibc*
+set d_gnulibc
+eval $setvar
+
+: see if nm is to be used to determine whether a symbol is defined or not
+case "$usenm" in
+'')
+ case "$d_gnulibc" in
+ $define)
+ dflt=n
+ ;;
+ *)
+ dflt=`egrep 'inlibc|csym' ../Configure | wc -l 2>/dev/null`
+ if $test $dflt -gt 20; then
+ dflt=y
+ else
+ dflt=n
fi
- done
- set X $cppflags
- shift
- cppflags=${1+"$@"}
- case "$cppflags" in
- *-*) echo "They appear to be: $cppflags";;
+ ;;
+ esac
+ ;;
+*)
+ case "$usenm" in
+ true) dflt=y;;
+ *) dflt=n;;
esac
- $rm -f cpp.c cpp?.out
;;
esac
+$cat <<EOM
-: flags used in final linking phase
+I can use 'nm' to extract the symbols from your C libraries. This is a time
+consuming task which may generate huge output on the disk (up to 3 megabytes)
+but that should make the symbols extraction faster. The alternative is to skip
+the 'nm' extraction part and to compile a small test program instead to
+determine whether each symbol is present. If you have a fast C compiler and/or
+if your 'nm' output cannot be parsed, this may be the best solution.
+You shouldn't let me use 'nm' if you have the GNU C Library.
-case "$ldflags" in
-'') if ./venix; then
- dflt='-i -z'
+EOM
+rp='Shall I use nm to extract C symbols from the libraries?'
+. ./myread
+case "$ans" in
+n|N) usenm=false;;
+*) usenm=true;;
+esac
+
+runnm=$usenm
+case "$reuseval" in
+true) runnm=false;;
+esac
+
+: nm options which may be necessary
+case "$nm_opt" in
+'') if $test -f /mach_boot; then
+ nm_opt=''
+ elif $test -d /usr/ccs/lib; then
+ nm_opt='-p'
+ elif $test -f /dgux; then
+ nm_opt='-p'
else
- dflt=''
- fi
- case "$ccflags" in
- *-posix*) dflt="$dflt -posix" ;;
+ nm_opt=''
+ fi;;
+esac
+
+: nm options which may be necessary for shared libraries but illegal
+: for archive libraries. Thank you, Linux.
+case "$nm_so_opt" in
+'') case "$myuname" in
+ *linux*)
+ if nm --help | $grep 'dynamic' > /dev/null 2>&1; then
+ nm_so_opt='--dynamic'
+ fi
+ ;;
esac
;;
-*) dflt="$ldflags";;
esac
-: Try to guess additional flags to pick up local libraries.
-for thislibdir in $libpth; do
- case " $loclibpth " in
- *" $thislibdir "*)
- case "$dflt " in
- *"-L$thislibdir "*) ;;
- *) dflt="$dflt -L$thislibdir" ;;
- esac
+case "$runnm" in
+true)
+: get list of predefined functions in a handy place
+echo " "
+case "$libc" in
+'') libc=unknown
+ case "$libs" in
+ *-lc_s*) libc=`./loc libc_s$lib_ext $libc $libpth`
+ esac
+ ;;
+esac
+libnames='';
+case "$libs" in
+'') ;;
+*) for thislib in $libs; do
+ case "$thislib" in
+ -lc|-lc_s)
+ : Handle C library specially below.
+ ;;
+ -l*)
+ thislib=`echo $thislib | $sed -e 's/^-l//'`
+ if try=`./loc lib$thislib.$so.'*' X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib.$so X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib$lib_ext X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc $thislib X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc Slib$thislib$lib_ext X $xlibpth`; $test -f "$try"; then
+ :
+ else
+ try=''
+ fi
+ libnames="$libnames $try"
;;
+ *) libnames="$libnames $thislib" ;;
esac
-done
-
-case "$dflt" in
-'') dflt='none' ;;
+ done
+ ;;
+esac
+xxx=normal
+case "$libc" in
+unknown)
+ set /lib/libc.$so
+ for xxx in $libpth; do
+ $test -r $1 || set $xxx/libc.$so
+ : The messy sed command sorts on library version numbers.
+ $test -r $1 || \
+ set `echo blurfl; echo $xxx/libc.$so.[0-9]* | \
+ tr ' ' '\012' | egrep -v '\.[A-Za-z]*$' | $sed -e '
+ h
+ s/[0-9][0-9]*/0000&/g
+ s/0*\([0-9][0-9][0-9][0-9][0-9]\)/\1/g
+ G
+ s/\n/ /' | \
+ sort | $sed -e 's/^.* //'`
+ eval set \$$#
+ done
+ $test -r $1 || set /usr/ccs/lib/libc.$so
+ $test -r $1 || set /lib/libsys_s$lib_ext
+ ;;
+*)
+ set blurfl
+ ;;
esac
+if $test -r "$1"; then
+ echo "Your (shared) C library seems to be in $1."
+ libc="$1"
+elif $test -r /lib/libc && $test -r /lib/clib; then
+ echo "Your C library seems to be in both /lib/clib and /lib/libc."
+ xxx=apollo
+ libc='/lib/clib /lib/libc'
+ if $test -r /lib/syslib; then
+ echo "(Your math library is in /lib/syslib.)"
+ libc="$libc /lib/syslib"
+ fi
+elif $test -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
+ echo "Your C library seems to be in $libc, as you said before."
+elif $test -r $incpath/usr/lib/libc$lib_ext; then
+ libc=$incpath/usr/lib/libc$lib_ext;
+ echo "Your C library seems to be in $libc. That's fine."
+elif $test -r /lib/libc$lib_ext; then
+ libc=/lib/libc$lib_ext;
+ echo "Your C library seems to be in $libc. You're normal."
+else
+ if tans=`./loc libc$lib_ext blurfl/dyick $libpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc libc blurfl/dyick $libpth`; $test -r "$tans"; then
+ libnames="$libnames "`./loc clib blurfl/dyick $libpth`
+ elif tans=`./loc clib blurfl/dyick $libpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc Slibc$lib_ext blurfl/dyick $xlibpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc Mlibc$lib_ext blurfl/dyick $xlibpth`; $test -r "$tans"; then
+ :
+ else
+ tans=`./loc Llibc$lib_ext blurfl/dyick $xlibpth`
+ fi
+ if $test -r "$tans"; then
+ echo "Your C library seems to be in $tans, of all places."
+ libc=$tans
+ else
+ libc='blurfl'
+ fi
+fi
+if $test $xxx = apollo -o -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
+ dflt="$libc"
+ cat <<EOM
-$cat <<EOH
+If the guess above is wrong (which it might be if you're using a strange
+compiler, or your machine supports multiple models), you can override it here.
-Your C linker may need flags. For this question you should
-include -L/whatever and any other flags used by the C linker, but you
-should NOT include libraries like -lwhatever.
+EOM
+else
+ dflt=''
+ echo $libpth | tr ' ' '\012' | sort | uniq > libpath
+ cat >&4 <<EOM
+I can't seem to find your C library. I've looked in the following places:
-Make sure you include the appropriate -L/path flags if your C linker
-does not normally search all of the directories you specified above,
-namely
- $libpth
-To use no flags, specify the word "none".
+EOM
+ $sed 's/^/ /' libpath
+ cat <<EOM
-EOH
+None of these seems to contain your C library. I need to get its name...
-rp="Any additional ld flags (NOT including libraries)?"
-. ./myread
-case "$ans" in
-none) ldflags='';;
-*) ldflags="$ans";;
-esac
-rmlist="$rmlist pdp11"
+EOM
+fi
+fn=f
+rp='Where is your C library?'
+. ./getfile
+libc="$ans"
-: coherency check
echo " "
-echo "Checking your choice of C compiler and flags for coherency..." >&4
-set X $cc $optimize $ccflags $ldflags try.c -o try
+echo $libc $libnames | tr ' ' '\012' | sort | uniq > libnames
+set X `cat libnames`
shift
-$cat >try.msg <<EOM
-I've tried to compile and run a simple program with:
-
- $*
- ./try
+xxx=files
+case $# in 1) xxx=file; esac
+echo "Extracting names from the following $xxx for later perusal:" >&4
+echo " "
+$sed 's/^/ /' libnames >&4
+echo " "
+$echo $n "This may take a while...$c" >&4
-and I got the following output:
+: Linux may need the special Dynamic option to nm for shared libraries.
+: In general, this is stored in the nm_so_opt variable.
+: Unfortunately, that option may be fatal on non-shared libraries.
+for nm_libs_ext in $*; do
+ case $nm_libs_ext in
+ *$so*) nm $nm_so_opt $nm_opt $nm_libs_ext 2>/dev/null ;;
+ *) nm $nm_opt $nm_libs_ext 2>/dev/null ;;
+ esac
+done > libc.tmp
-EOM
-$cat > try.c <<'EOF'
-#include <stdio.h>
-main() { exit(0); }
-EOF
-dflt=y
-if sh -c "$cc $optimize $ccflags try.c -o try $ldflags" >>try.msg 2>&1; then
- if sh -c './try' >>try.msg 2>&1; then
- dflt=n
+$echo $n ".$c"
+$grep fprintf libc.tmp > libc.ptf
+xscan='eval "<libc.ptf $com >libc.list"; $echo $n ".$c" >&4'
+xrun='eval "<libc.tmp $com >libc.list"; echo "done" >&4'
+xxx='[ADTSIW]'
+if com="$sed -n -e 's/__IO//' -e 's/^.* $xxx *_[_.]*//p' -e 's/^.* $xxx *//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^__*//' -e 's/^\([a-zA-Z_0-9$]*\).*xtern.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e '/|UNDEF/d' -e '/FUNC..GL/s/^.*|__*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.* D __*//p' -e 's/^.* D //p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^_//' -e 's/^\([a-zA-Z_0-9]*\).*xtern.*text.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$grep '|' | $sed -n -e '/|COMMON/d' -e '/|DATA/d' \
+ -e '/ file/d' -e 's/^\([^ ]*\).*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p' -e 's/^.*|FUNC |WEAK .*|//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^__//' -e '/|Undef/d' -e '/|Proc/s/ .*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e '/Def. Text/s/.* \([^ ]*\)\$/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^[-0-9a-f ]*_\(.*\)=.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+else
+ nm -p $* 2>/dev/null >libc.tmp
+ $grep fprintf libc.tmp > libc.ptf
+ if com="$sed -n -e 's/^.* [ADTSIW] *_[_.]*//p' -e 's/^.* [ADTSIW] //p'";\
+ eval $xscan; $contains '^fprintf$' libc.list >/dev/null 2>&1
+ then
+ nm_opt='-p'
+ eval $xrun
else
- echo "The program compiled OK, but exited with status $?." >>try.msg
- rp="You have a problem. Shall I abort Configure"
- dflt=y
+ echo " "
+ echo "nm didn't seem to work right. Trying ar instead..." >&4
+ com=''
+ if ar t $libc > libc.tmp; then
+ for thisname in $libnames; do
+ ar t $thisname >>libc.tmp
+ done
+ $sed -e 's/\.o$//' < libc.tmp > libc.list
+ echo "Ok." >&4
+ else
+ echo "ar didn't seem to work right." >&4
+ echo "Maybe this is a Cray...trying bld instead..." >&4
+ if bld t $libc | $sed -e 's/.*\///' -e 's/\.o:.*$//' > libc.list
+ then
+ for thisname in $libnames; do
+ bld t $libnames | \
+ $sed -e 's/.*\///' -e 's/\.o:.*$//' >>libc.list
+ ar t $thisname >>libc.tmp
+ done
+ echo "Ok." >&4
+ else
+ echo "That didn't work either. Giving up." >&4
+ exit 1
+ fi
+ fi
fi
-else
- echo "I can't compile the test program." >>try.msg
- rp="You have a BIG problem. Shall I abort Configure"
- dflt=y
fi
-case "$dflt" in
-y)
- $cat try.msg
- case "$knowitall" in
- '')
- echo "(The supplied flags might be incorrect with this C compiler.)"
- ;;
- *) dflt=n;;
- esac
+nm_extract="$com"
+if $test -f /lib/syscalls.exp; then
echo " "
- . ./myread
- case "$ans" in
- n*|N*) ;;
- *) echo "Ok. Stopping Configure." >&4
- exit 1
- ;;
- esac
- ;;
-n) echo "OK, that should do.";;
+ echo "Also extracting names from /lib/syscalls.exp for good ole AIX..." >&4
+ $sed -n 's/^\([^ ]*\)[ ]*syscall$/\1/p' /lib/syscalls.exp >>libc.list
+fi
+;;
esac
-$rm -f try try.* core
+$rm -f libnames libpath
: determine filename position in cpp output
echo " "
*) $cat >&4 <<EOM
WARNING: Use of the shrpdir variable for the installation location of
the shared $libperl is not supported. It was never documented and
-will not work in this version. Let me (doughera@lafcol.lafayette.edu)
+will not work in this version. Let me (chip@atlantic.net)
know of any problems this may cause.
EOM
solaris|netbsd)
xxx="-R $shrpdir"
;;
- linux)
+ linux|irix*)
xxx="-Wl,-rpath,$shrpdir"
;;
*)
. ./myread
perladmin="$ans"
+: figure out how to guarantee perl startup
+case "$startperl" in
+'')
+ case "$sharpbang" in
+ *!)
+ $cat <<EOH
+
+I can use the #! construct to start perl on your system. This will
+make startup of perl scripts faster, but may cause problems if you
+want to share those scripts and perl is not in a standard place
+($binexp/perl) on all your platforms. The alternative is to force
+a shell by starting the script with a single ':' character.
+
+EOH
+ dflt="$binexp/perl"
+ rp='What shall I put after the #! to start up perl ("none" to not use #!)?'
+ . ./myread
+ case "$ans" in
+ none) startperl=": # use perl";;
+ *) startperl="#!$ans";;
+ esac
+ ;;
+ *) startperl=": # use perl"
+ ;;
+ esac
+ ;;
+esac
+echo "I'll use $startperl to start perl scripts."
+
+: figure best path for perl in scripts
+case "$perlpath" in
+'')
+ perlpath="$binexp/perl"
+ case "$startperl" in
+ *!*) ;;
+ *)
+ $cat <<EOH
+
+I will use the "eval 'exec'" idiom to start Perl on your system.
+I can use the full path of your Perl binary for this purpose, but
+doing so may cause problems if you want to share those scripts and
+Perl is not always in a standard place ($binexp/perl).
+
+EOH
+ dflt="$binexp/perl"
+ rp="What path shall I use in \"eval 'exec'\"?"
+ . ./myread
+ perlpath="$ans"
+ ;;
+ esac
+ ;;
+esac
+case "$startperl" in
+*!*) ;;
+*) echo "I'll use $perlpath in \"eval 'exec'\"" ;;
+esac
+
: determine where public executable scripts go
set scriptdir scriptdir
eval $prefixit
installscript="$scriptdirexp"
fi
-: determine perl absolute location
-case "$perlpath" in
-'') perlpath=$binexp/perl ;;
-esac
-
-: figure out how to guarantee perl startup
-case "$startperl" in
-'')
- case "$sharpbang" in
- *!)
- $cat <<EOH
-
-I can use the #! construct to start perl on your system. This will
-make startup of perl scripts faster, but may cause problems if you
-want to share those scripts and perl is not in a standard place
-($perlpath) on all your platforms. The alternative is to force
-a shell by starting the script with a single ':' character.
-
-EOH
- dflt=$perlpath
- rp='What shall I put after the #! to start up perl ("none" to not use #!)?'
- . ./myread
- case "$ans" in
- none) startperl=": # use perl";;
- *) startperl="#!$ans";;
- esac
- ;;
- *) startperl=": # use perl"
- ;;
- esac
- ;;
-esac
-echo "I'll use $startperl to start perl scripts."
-
cat <<EOM
Previous version of $package used the standard IO mechanisms as defined in
val="$define"
cryptlib=''
else
- cryptlib=`./loc Slibcrypt.a "" $xlibpth`
+ cryptlib=`./loc Slibcrypt$lib_ext "" $xlibpth`
if $test -z "$cryptlib"; then
- cryptlib=`./loc Mlibcrypt.a "" $xlibpth`
+ cryptlib=`./loc Mlibcrypt$lib_ext "" $xlibpth`
else
cryptlib=-lcrypt
fi
if $test -z "$cryptlib"; then
- cryptlib=`./loc Llibcrypt.a "" $xlibpth`
+ cryptlib=`./loc Llibcrypt$lib_ext "" $xlibpth`
else
cryptlib=-lcrypt
fi
if $test -z "$cryptlib"; then
- cryptlib=`./loc libcrypt.a "" $libpth`
+ cryptlib=`./loc libcrypt$lib_ext "" $libpth`
else
cryptlib=-lcrypt
fi
#endif
handle = dlopen("./dyna.$dlext", mode) ;
if (handle == NULL) {
- printf ("1\n") ;
- exit(0);
+ printf ("1\n") ;
+ fflush (stdout) ;
+ exit(0);
}
symbol = dlsym(handle, "fred") ;
if (symbol == NULL) {
- /* try putting a leading underscore */
- symbol = dlsym(handle, "_fred") ;
- if (symbol == NULL) {
- printf ("2\n") ;
- exit(0);
- }
- printf ("3\n") ;
+ /* try putting a leading underscore */
+ symbol = dlsym(handle, "_fred") ;
+ if (symbol == NULL) {
+ printf ("2\n") ;
+ fflush (stdout) ;
+ exit(0);
+ }
+ printf ("3\n") ;
}
else
- printf ("4\n") ;
- exit(0);
+ printf ("4\n") ;
+ fflush (stdout) ;
+ exit(0);
}
EOM
: Call the object file tmp-dyna.o in case dlext=o.
set getpriority d_getprior
eval $inlibc
+: see if gettimeofday or ftime exists
+set gettimeofday d_gettimeod
+eval $inlibc
+case "$d_gettimeod" in
+"$undef")
+ set ftime d_ftime
+ eval $inlibc
+ ;;
+*)
+ val="$undef"; set d_ftime; eval $setvar
+ ;;
+esac
+case "$d_gettimeod$d_ftime" in
+"$undef$undef")
+ echo " "
+ echo 'No ftime() nor gettimeofday() -- timing may be less accurate.' >&4
+ ;;
+esac
+
: see if this is a netinet/in.h or sys/in.h system
set netinet/in.h i_niin sys/in.h i_sysin
eval $inhdr
val="$vali"
set d_index; eval $setvar
+: check whether inet_aton exists
+set inet_aton d_inetaton
+eval $inlibc
+
: Look for isascii
echo " "
$cat >isascii.c <<'EOCP'
set d_safemcpy
eval $setvar
+: can memcmp be trusted to compare relative magnitude?
+val="$undef"
+case "$d_memcmp" in
+"$define")
+ echo " "
+ echo "Checking to see if your memcmp() can compare relative magnitude..." >&4
+ $cat >foo.c <<EOCP
+#$i_memory I_MEMORY
+#$i_stdlib I_STDLIB
+#$i_string I_STRING
+#$i_unistd I_UNISTD
+EOCP
+ $cat >>foo.c <<'EOCP'
+#include <stdio.h>
+
+#ifdef I_MEMORY
+# include <memory.h>
+#endif
+#ifdef I_STDLIB
+# include <stdlib.h>
+#endif
+#ifdef I_STRING
+# include <string.h>
+#else
+# include <strings.h>
+#endif
+#ifdef I_UNISTD
+# include <unistd.h> /* Needed for NetBSD */
+#endif
+main()
+{
+char a = -1;
+char b = 0;
+if ((a < b) && memcmp(&a, &b, 1) < 0)
+ exit(1);
+exit(0);
+}
+EOCP
+ if $cc $ccflags $ldflags foo.c -o sanemcmp $libs >/dev/null 2>&1; then
+ if ./sanemcmp 2>/dev/null; then
+ echo "Yes, it can."
+ val="$define"
+ else
+ echo "No, it can't (it uses signed chars)."
+ fi
+ else
+ echo "(I can't compile the test program, so we'll assume not...)"
+ fi
+ ;;
+esac
+$rm -f foo.* sanemcmp core
+set d_sanemcmp
+eval $setvar
+
: see if select exists
set select d_select
eval $inlibc
: we will have to assume that it supports the 4.2 BSD interface
d_oldsock="$undef"
else
- echo "You don't have Berkeley networking in libc.a..." >&4
- if test -f /usr/lib/libnet.a; then
- ( (nm $nm_opt /usr/lib/libnet.a | eval $nm_extract) || \
- ar t /usr/lib/libnet.a) 2>/dev/null >> libc.list
+ echo "You don't have Berkeley networking in libc$lib_ext..." >&4
+ if test -f /usr/lib/libnet$lib_ext; then
+ ( (nm $nm_opt /usr/lib/libnet$lib_ext | eval $nm_extract) || \
+ ar t /usr/lib/libnet$lib_ext) 2>/dev/null >> libc.list
if $contains socket libc.list >/dev/null 2>&1; then
echo "...but the Wollongong group seems to have hacked it in." >&4
socketlib="-lnet"
d_oldsock="$define"
fi
else
- echo "or even in libnet.a, which is peculiar." >&4
+ echo "or even in libnet$lib_ext, which is peculiar." >&4
d_socket="$undef"
d_oldsock="$undef"
fi
d_strerrm='"unknown"'
fi
+: see if strtod exists
+set strtod d_strtod
+eval $inlibc
+
+: see if strtol exists
+set strtol d_strtol
+eval $inlibc
+
+: see if strtoul exists
+set strtoul d_strtoul
+eval $inlibc
+
: see if strxfrm exists
set strxfrm d_strxfrm
eval $inlibc
$cc $ccflags -c bar1.c >/dev/null 2>&1
$cc $ccflags -c bar2.c >/dev/null 2>&1
$cc $ccflags -c foo.c >/dev/null 2>&1
-ar rc bar.a bar2.o bar1.o >/dev/null 2>&1
-if $cc $ccflags $ldflags -o foobar foo.o bar.a $libs > /dev/null 2>&1 &&
+ar rc bar$lib_ext bar2.o bar1.o >/dev/null 2>&1
+if $cc $ccflags $ldflags -o foobar foo.o bar$lib_ext $libs > /dev/null 2>&1 &&
./foobar >/dev/null 2>&1; then
echo "ar appears to generate random libraries itself."
orderlib=false
ranlib=":"
-elif ar ts bar.a >/dev/null 2>&1 &&
- $cc $ccflags $ldflags -o foobar foo.o bar.a $libs > /dev/null 2>&1 &&
+elif ar ts bar$lib_ext >/dev/null 2>&1 &&
+ $cc $ccflags $ldflags -o foobar foo.o bar$lib_ext $libs > /dev/null 2>&1 &&
./foobar >/dev/null 2>&1; then
echo "a table of contents needs to be added with 'ar ts'."
orderlib=false
#endif
#ifdef I_SYS_TIME
#include <sys/time.h>
-#else
+#endif
#ifdef I_SYS_SELECT
#include <sys/select.h>
#endif
-#endif
main() {
fd_set fds;
: some additional extensions into the source tree and expect them
: to be built.
for xxx in * ; do
- if $test -f $xxx/$xxx.xs; then
- known_extensions="$known_extensions $xxx"
+ case "$xxx" in
+ DynaLoader) ;;
+ *) if $test -f $xxx/$xxx.xs; then
+ known_extensions="$known_extensions $xxx"
else
- if $test -d $xxx; then
- cd $xxx
- for yyy in * ; do
- if $test -f $yyy/$yyy.xs; then
- known_extensions="$known_extensions $xxx/$yyy"
- fi
- done
- cd ..
- fi
- fi
+ if $test -d $xxx; then
+ cd $xxx
+ for yyy in * ; do
+ if $test -f $yyy/$yyy.xs; then
+ known_extensions="$known_extensions $xxx/$yyy"
+ fi
+ done
+ cd ..
+ fi
+ fi ;;
+ esac
done
set X $known_extensions
shift
baserev='$baserev'
bash='$bash'
bin='$bin'
+bincompat3='$bincompat3'
binexp='$binexp'
bison='$bison'
byacc='$byacc'
d_attribut='$d_attribut'
d_bcmp='$d_bcmp'
d_bcopy='$d_bcopy'
+d_bincompat3='$d_bincompat3'
d_bsd='$d_bsd'
d_bsdgetpgrp='$d_bsdgetpgrp'
d_bsdpgrp='$d_bsdpgrp'
d_fork='$d_fork'
d_fpathconf='$d_fpathconf'
d_fsetpos='$d_fsetpos'
+d_ftime='$d_ftime'
d_getgrps='$d_getgrps'
d_gethent='$d_gethent'
d_gethname='$d_gethname'
d_getpgrp='$d_getpgrp'
d_getppid='$d_getppid'
d_getprior='$d_getprior'
+d_gettimeod='$d_gettimeod'
+d_gnulibc='$d_gnulibc'
d_htonl='$d_htonl'
d_index='$d_index'
+d_inetaton='$d_inetaton'
d_isascii='$d_isascii'
d_killpg='$d_killpg'
d_link='$d_link'
d_rmdir='$d_rmdir'
d_safebcpy='$d_safebcpy'
d_safemcpy='$d_safemcpy'
+d_sanemcmp='$d_sanemcmp'
d_seekdir='$d_seekdir'
d_select='$d_select'
d_sem='$d_sem'
d_strctcpy='$d_strctcpy'
d_strerrm='$d_strerrm'
d_strerror='$d_strerror'
+d_strtod='$d_strtod'
+d_strtol='$d_strtol'
+d_strtoul='$d_strtoul'
d_strxfrm='$d_strxfrm'
d_suidsafe='$d_suidsafe'
d_symlink='$d_symlink'
projects / p5sagit/p5-mst-13.2.git / blobdiff