# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Sun Jul 25 17:05:01 EET DST 1999 [metaconfig 3.0 PL70]
+# Generated on Mon Sep 20 12:57:28 EET DST 1999 [metaconfig 3.0 PL70]
# (with additional metaconfig patches by perlbug@perl.com)
cat >/tmp/c1$$ <<EOF
installarchlib=''
archname=''
myarchname=''
+d_atolf=''
+d_atoll=''
baserev=''
bin=''
binexp=''
installbin=''
+bincompat5005=''
+d_bincompat5005=''
byteorder=''
cc=''
gccversion=''
d_isascii=''
d_killpg=''
d_lchown=''
+d_ldbl_dig=''
d_link=''
d_locconv=''
d_lockf=''
d_wcstombs=''
d_wctomb=''
d_writev=''
-d_dbmclose64=''
-d_dbminit64=''
-d_delete64=''
-d_fetch64=''
-d_firstkey64=''
-d_nextkey64=''
-d_store64=''
dlext=''
cccdlflags=''
ccdlflags=''
intsize=''
longsize=''
shortsize=''
-d_dirent64_s=''
-d_flock64_s=''
-d_fstat64=''
-d_ftruncate64=''
-d_ino64_t=''
+d_fpos64_t=''
d_llseek=''
-d_lockf64=''
-d_lseek64=''
-d_lstat64=''
d_off64_t=''
-d_offset_t=''
-d_open64=''
-d_opendir64=''
-d_readdir64=''
-d_seekdir64=''
-d_stat64=''
-d_telldir64=''
-d_truncate64=''
libc=''
ldlibpthname=''
libperl=''
ignore_versioned_solibs=''
libs=''
lns=''
+d_PRIEldbl=''
+d_PRIFldbl=''
+d_PRIGldbl=''
+d_PRIeldbl=''
+d_PRIfldbl=''
+d_PRIgldbl=''
+sPRIEldbl=''
+sPRIFldbl=''
+sPRIGldbl=''
+sPRIeldbl=''
+sPRIfldbl=''
+sPRIgldbl=''
lseeksize=''
lseektype=''
make_set_make=''
privlibexp=''
prototype=''
ptrsize=''
+d_PRIX64=''
+d_PRId64=''
+d_PRIi64=''
+d_PRIo64=''
+d_PRIu64=''
+d_PRIx64=''
+sPRIX64=''
+sPRId64=''
+sPRIi64=''
+sPRIo64=''
+sPRIu64=''
+sPRIx64=''
drand01=''
randbits=''
randfunc=''
startperl=''
startsh=''
stdchar=''
-d_fgetpos64=''
-d_fopen64=''
-d_freopen64=''
-d_fseek64=''
-d_fseeko64=''
-d_fsetpos64=''
-d_ftell64=''
-d_ftello64=''
-d_tmpfile64=''
d_stdio_stream_array=''
stdio_stream_array=''
+d_strtoull=''
sysman=''
trnl=''
uidtype=''
archname64=''
use64bits=''
+uselfs=''
+uselongdouble=''
+usemorebits=''
usemultiplicity=''
nm_opt=''
nm_so_opt=''
: List of libraries we want.
: If anyone needs -lnet, put it in a hint file.
libswanted='sfio socket inet nsl nm ndbm gdbm dbm db malloc dl'
-libswanted="$libswanted dld ld sun m rt c cposix posix"
+libswanted="$libswanted dld ld sun m c cposix posix"
libswanted="$libswanted ndir dir crypt sec"
libswanted="$libswanted ucb bsd BSD PW x"
: We probably want to search /usr/shlib before most other libraries.
: produce awk script to parse command line options
cat >options.awk <<'EOF'
BEGIN {
- optstr = "dD:eEf:hKOrsSU:V"; # getopt-style specification
+ optstr = "A:dD:eEf:hKOrsSU:V"; # getopt-style specification
len = length(optstr);
for (i = 1; i <= len; i++) {
extractsh=''
override=''
knowitall=''
-rm -f optdef.sh
+rm -f optdef.sh posthint.sh
cat >optdef.sh <<EOS
$startsh
EOS
esac
shift
;;
+ -A)
+ shift
+ xxx=''
+ yyy="$1"
+ case "$yyy" in
+ *:*) xxx=`echo $yyy|sed 's!:.*!!'`
+ yyy=`echo $yyy|sed 's!^[^:]*:!!'`
+ ;;
+ esac
+ case "$xxx" in
+ '') xxx=define ;;
+ esac
+ zzz=''
+ uuu='undef'
+ case "$yyy" in
+ *=*) zzz=`echo $yyy|sed 's!^[^=]*=!!'`
+ yyy=`echo $yyy|sed 's!=.*!!'`
+ case "$yyy:$zzz" in
+ undef:) uuu='' ;;
+ esac
+ ;;
+ esac
+ case "$xxx" in
+ append)
+ echo "$yyy=\"\${$yyy}$zzz\"" >> posthint.sh
+ ;;
+ clear)
+ echo "$yyy=''" >> posthint.sh
+ ;;
+ define)
+ case "$zzz" in
+ '') zzz=define ;;
+ esac
+ echo "$yyy='$zzz'" >> posthint.sh
+ ;;
+ eval)
+ echo "eval \"$yyy=$zzz\"" >> posthint.sh
+ ;;
+ prepend)
+ echo "$yyy=\"$zzz\${$yyy}\"" >> posthint.sh
+ ;;
+ undef)
+ case "$zzz" in
+ '') zzz="$uuu" ;;
+ esac
+ echo "$yyy=$zzz" >> posthint.sh
+ ;;
+ *) echo "$me: unknown -A command '$xxx', ignoring -A $1" >&2
+ ;;
+ esac
+ ;;
-V) echo "$me generated by metaconfig 3.0 PL70." >&2
exit 0;;
--) break;;
true)
cat >&2 <<EOM
Usage: $me [-dehrsEKOSV] [-f config.sh] [-D symbol] [-D symbol=value]
- [-U symbol] [-U symbol=]
+ [-U symbol] [-U symbol=] [-A command:symbol...]
-d : use defaults for all answers.
-e : go on without questioning past the production of config.sh.
-f : specify an alternate default configuration file.
-U : undefine symbol:
-U symbol symbol gets the value 'undef'
-U symbol= symbol gets completely empty
+ -A : manipulate symbol after the platform specific hints have been applied:
+ -A append:symbol=value append value to symbol
+ -A define:symbol=value define symbol to have value
+ -A symbol=value define symbol to have value
+ -A clear:symbol define symbol to be ''
+ -A define:symbol define symbol to be 'define'
+ -A eval:symbol=value define symbol to be eval of value
+ -A prepend:symbol=value prepend value to symbol
+ -A undef:symbol define symbol to be 'undef'
+ -A undef:symbol= define symbol to be ''
-V : print version number and exit (with a zero status).
EOM
exit 1
: run the defines and the undefines, if any, but leave the file out there...
touch optdef.sh
. ./optdef.sh
+: create the posthint manipulation script and leave the file out there...
+touch posthint.sh
+. ./posthint.sh
: set package name
package=perl5
*) osvers="$ans" ;;
esac
+
+. ./posthint.sh
+
: who configured the system
cf_time=`LC_ALL=C; LANGUAGE=C; export LC_ALL; export LANGUAGE; $date 2>&1`
cf_by=`(logname) 2>/dev/null`
: user has specified that a threading perl is to be built,
: we may need to set or change some other defaults.
if $test -f usethreads.cbu; then
+ echo "Your platform has some specific hints for threaded builds, using them..."
. ./usethreads.cbu
- fi
- case "$osname" in
- aix|dec_osf|dos_djgpp|freebsd|hpux|irix|linux|next|openbsd|os2|solaris|vmesa)
- # Known thread-capable platforms.
- ;;
- *)
- cat >&4 <<EOM
-$osname is not known to support threads.
-Please let perlbug@perl.com know how to do that.
-
-Cannot continue, aborting.
+ else
+ $cat <<EOM
+(Your platform doesn't have any specific hints for threaded builds.
+ Assuming POSIX threads, then.)
EOM
- exit 1
- ;;
- esac # $osname
+ fi
;;
-esac # $usethreads
+esac
cat <<EOM
set usemultiplicity
eval $setvar
-cat <<EOM
-
-Perl can be built to take advantage of explicit 64-bit interfaces,
-on some systems. To do so, Configure must be run with -Duse64bits.
-
-If this doesn't make any sense to you, just accept the default 'n'.
-EOM
-case "$use64bits" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-rp='Try to use explicit 64-bit interfaces, if available?'
-. ./myread
-case "$ans" in
-y|Y)
- val="$define"
- ;;
-*)
- val="$undef"
+: determine where manual pages are on this system
+echo " "
+case "$sysman" in
+'')
+ syspath='/usr/man/man1 /usr/man/mann /usr/man/manl /usr/man/local/man1'
+ syspath="$syspath /usr/man/u_man/man1 /usr/share/man/man1"
+ syspath="$syspath /usr/catman/u_man/man1 /usr/man/l_man/man1"
+ syspath="$syspath /usr/local/man/u_man/man1 /usr/local/man/l_man/man1"
+ syspath="$syspath /usr/man/man.L /local/man/man1 /usr/local/man/man1"
+ sysman=`./loc . /usr/man/man1 $syspath`
;;
esac
-set use64bits
-eval $setvar
+if $test -d "$sysman"; then
+ echo "System manual is in $sysman." >&4
+else
+ echo "Could not find manual pages in source form." >&4
+fi
-case "$archname64" in
-'') archname64='' ;; # not a typo
+: see what memory models we can support
+case "$models" in
+'')
+ $cat >pdp11.c <<'EOP'
+int main() {
+#ifdef pdp11
+ exit(0);
+#else
+ exit(1);
+#endif
+}
+EOP
+ ( cc -o pdp11 pdp11.c ) >/dev/null 2>&1
+ if $test -f pdp11 && ./pdp11 2>/dev/null; then
+ dflt='unsplit split'
+ else
+ tans=`./loc . X /lib/small /lib/large /usr/lib/small /usr/lib/large /lib/medium /usr/lib/medium /lib/huge`
+ case "$tans" in
+ X) dflt='none';;
+ *) if $test -d /lib/small || $test -d /usr/lib/small; then
+ dflt='small'
+ else
+ dflt=''
+ fi
+ if $test -d /lib/medium || $test -d /usr/lib/medium; then
+ dflt="$dflt medium"
+ fi
+ if $test -d /lib/large || $test -d /usr/lib/large; then
+ dflt="$dflt large"
+ fi
+ if $test -d /lib/huge || $test -d /usr/lib/huge; then
+ dflt="$dflt huge"
+ fi
+ esac
+ fi;;
+*) dflt="$models";;
esac
+$cat <<EOM
+
+Some systems have different model sizes. On most systems they are called
+small, medium, large, and huge. On the PDP11 they are called unsplit and
+split. If your system doesn't support different memory models, say "none".
+If you wish to force everything to one memory model, say "none" here and
+put the appropriate flags later when it asks you for other cc and ld flags.
+Venix systems may wish to put "none" and let the compiler figure things out.
+(In the following question multiple model names should be space separated.)
-case "$use64bits" in
-"$define"|true|[yY]*)
-: Look for a hint-file generated 'call-back-unit'. If the
-: user has specified that a 64 bit perl is to be built,
-: we may need to set or change some other defaults.
- if $test -f use64bits.cbu; then
- . ./use64bits.cbu
- fi
- case "$osname" in
- aix|dec_osf|hpux|irix|solaris|unicos)
- # Known 64-bit capable platforms.
- ;;
- *)
- cat >&4 <<EOM
-$osname is not known to support 64-bit interfaces.
-Please let perlbug@perl.com know how to do that.
+The default for most systems is "none".
-Cannot continue, aborting.
EOM
- exit 1
- ;;
+rp="Which memory models are supported?"
+. ./myread
+models="$ans"
+
+case "$models" in
+none)
+ small=''
+ medium=''
+ large=''
+ huge=''
+ unsplit=''
+ split=''
+ ;;
+*split)
+ case "$split" in
+ '') if $contains '\-i' $sysman/ld.1 >/dev/null 2>&1 || \
+ $contains '\-i' $sysman/cc.1 >/dev/null 2>&1; then
+ dflt='-i'
+ else
+ dflt='none'
+ fi;;
+ *) dflt="$split";;
+ esac
+ rp="What flag indicates separate I and D space?"
+ . ./myread
+ tans="$ans"
+ case "$tans" in
+ none) tans='';;
+ esac
+ split="$tans"
+ unsplit='';;
+*large*|*small*|*medium*|*huge*)
+ case "$models" in
+ *large*)
+ case "$large" in
+ '') dflt='-Ml';;
+ *) dflt="$large";;
+ esac
+ rp="What flag indicates large model?"
+ . ./myread
+ tans="$ans"
+ case "$tans" in
+ none) tans='';
+ esac
+ large="$tans";;
+ *) large='';;
+ esac
+ case "$models" in
+ *huge*) case "$huge" in
+ '') dflt='-Mh';;
+ *) dflt="$huge";;
+ esac
+ rp="What flag indicates huge model?"
+ . ./myread
+ tans="$ans"
+ case "$tans" in
+ none) tans='';
+ esac
+ huge="$tans";;
+ *) huge="$large";;
+ esac
+ case "$models" in
+ *medium*) case "$medium" in
+ '') dflt='-Mm';;
+ *) dflt="$medium";;
+ esac
+ rp="What flag indicates medium model?"
+ . ./myread
+ tans="$ans"
+ case "$tans" in
+ none) tans='';
+ esac
+ medium="$tans";;
+ *) medium="$large";;
+ esac
+ case "$models" in
+ *small*) case "$small" in
+ '') dflt='none';;
+ *) dflt="$small";;
+ esac
+ rp="What flag indicates small model?"
+ . ./myread
+ tans="$ans"
+ case "$tans" in
+ none) tans='';
+ esac
+ small="$tans";;
+ *) small='';;
esac
;;
+*)
+ echo "Unrecognized memory models--you may have to edit Makefile.SH" >&4
+ ;;
esac
+$rm -f pdp11.* pdp11
-: determine the architecture name
+: make some quick guesses about what we are up against
echo " "
-if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
- tarch=`arch`"-$osname"
-elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
- if uname -m > tmparch 2>&1 ; then
- tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
- -e 's/$/'"-$osname/" tmparch`
+$echo $n "Hmm... $c"
+echo exit 1 >bsd
+echo exit 1 >usg
+echo exit 1 >v7
+echo exit 1 >osf1
+echo exit 1 >eunice
+echo exit 1 >xenix
+echo exit 1 >venix
+echo exit 1 >os2
+d_bsd="$undef"
+$cat /usr/include/signal.h /usr/include/sys/signal.h >foo 2>/dev/null
+if test -f /osf_boot || $contains 'OSF/1' /usr/include/ctype.h >/dev/null 2>&1
+then
+ echo "Looks kind of like an OSF/1 system, but we'll see..."
+ echo exit 0 >osf1
+elif test `echo abc | tr a-z A-Z` = Abc ; then
+ xxx=`./loc addbib blurfl $pth`
+ if $test -f $xxx; then
+ echo "Looks kind of like a USG system with BSD features, but we'll see..."
+ echo exit 0 >bsd
+ echo exit 0 >usg
else
- tarch="$osname"
+ if $contains SIGTSTP foo >/dev/null 2>&1 ; then
+ echo "Looks kind of like an extended USG system, but we'll see..."
+ else
+ echo "Looks kind of like a USG system, but we'll see..."
+ fi
+ echo exit 0 >usg
fi
- $rm -f tmparch
+elif $contains SIGTSTP foo >/dev/null 2>&1 ; then
+ echo "Looks kind of like a BSD system, but we'll see..."
+ d_bsd="$define"
+ echo exit 0 >bsd
else
- tarch="$osname"
+ echo "Looks kind of like a Version 7 system, but we'll see..."
+ echo exit 0 >v7
fi
-case "$myarchname" in
-''|"$tarch") ;;
-*)
+case "$eunicefix" in
+*unixtovms*)
+ $cat <<'EOI'
+There is, however, a strange, musty smell in the air that reminds me of
+something...hmm...yes...I've got it...there's a VMS nearby, or I'm a Blit.
+EOI
+ echo exit 0 >eunice
+ d_eunice="$define"
+: it so happens the Eunice I know will not run shell scripts in Unix format
+ ;;
+*)
+ echo " "
+ echo "Congratulations. You aren't running Eunice."
+ d_eunice="$undef"
+ ;;
+esac
+: Detect OS2. The p_ variable is set above in the Head.U unit.
+case "$p_" in
+:) ;;
+*)
+ $cat <<'EOI'
+I have the feeling something is not exactly right, however...don't tell me...
+lemme think...does HAL ring a bell?...no, of course, you're only running OS/2!
+EOI
+ echo exit 0 >os2
+ ;;
+esac
+if test -f /xenix; then
+ echo "Actually, this looks more like a XENIX system..."
+ echo exit 0 >xenix
+ d_xenix="$define"
+else
+ echo " "
+ echo "It's not Xenix..."
+ d_xenix="$undef"
+fi
+chmod +x xenix
+$eunicefix xenix
+if test -f /venix; then
+ echo "Actually, this looks more like a VENIX system..."
+ echo exit 0 >venix
+else
+ echo " "
+ if ./xenix; then
+ : null
+ else
+ echo "Nor is it Venix..."
+ fi
+fi
+chmod +x bsd usg v7 osf1 eunice xenix venix os2
+$eunicefix bsd usg v7 osf1 eunice xenix venix os2
+$rm -f foo
+
+: see if we need a special compiler
+echo " "
+if ./usg; then
+ case "$cc" in
+ '') case "$Mcc" in
+ /*) dflt='Mcc';;
+ *) case "$large" in
+ -M*) dflt='cc';;
+ *) if $contains '\-M' $sysman/cc.1 >/dev/null 2>&1 ; then
+ if $contains '\-M' $sysman/cpp.1 >/dev/null 2>&1; then
+ dflt='cc'
+ else
+ dflt='cc -M'
+ fi
+ else
+ dflt='cc'
+ fi;;
+ esac;;
+ esac;;
+ *) dflt="$cc";;
+ esac
+ case "$dflt" in
+ *M*) $cat <<'EOM'
+On some older systems the default C compiler will not resolve multiple global
+references that happen to have the same name. On some such systems the "Mcc"
+command may be used to force these to be resolved. On other systems a "cc -M"
+command is required. (Note that the -M flag on other systems indicates a
+memory model to use!) If you have the Gnu C compiler, you might wish to use
+that instead.
+
+EOM
+ ;;
+ esac
+ rp="Use which C compiler?"
+ . ./myread
+ cc="$ans"
+else
+ case "$cc" in
+ '') dflt=cc;;
+ *) dflt="$cc";;
+ esac
+ rp="Use which C compiler?"
+ . ./myread
+ cc="$ans"
+fi
+: Look for a hint-file generated 'call-back-unit'. Now that the
+: user has specified the compiler, we may need to set or change some
+: other defaults.
+if $test -f cc.cbu; then
+ . ./cc.cbu
+fi
+echo " "
+echo "Checking for GNU cc in disguise and/or its version number..." >&4
+$cat >gccvers.c <<EOM
+#include <stdio.h>
+int main() {
+#ifdef __GNUC__
+#ifdef __VERSION__
+ printf("%s\n", __VERSION__);
+#else
+ printf("%s\n", "1");
+#endif
+#endif
+ exit(0);
+}
+EOM
+if $cc -o gccvers gccvers.c; then
+ gccversion=`./gccvers`
+ case "$gccversion" in
+ '') echo "You are not using GNU cc." ;;
+ *) echo "You are using GNU cc $gccversion." ;;
+ esac
+else
+ echo " "
+ echo "*** WHOA THERE!!! ***" >&4
+ echo " Your C compiler \"$cc\" doesn't seem to be working!" >&4
+ case "$knowitall" in
+ '')
+ echo " You'd better start hunting for one and let me know about it." >&4
+ exit 1
+ ;;
+ esac
+fi
+$rm -f gccvers*
+case "$gccversion" in
+1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
+esac
+
+
+case "$usemorebits" in
+"$define"|true|[yY]*)
+ use64bits="$define"
+ uselongdouble="$define"
+ usemorebits="$define"
+ ;;
+*) usemorebits="$undef"
+ ;;
+esac
+
+
+cat <<EOM
+
+Perl can be built to understand large files (files larger than 2 gigabytes)
+on some systems. To do so, Configure must be run with -Duselfs.
+
+If this doesn't make any sense to you, just accept the default.
+EOM
+case "$uselfs" in
+"$define"|true|[yY]*) dflt='y' ;;
+*) dflt='n' ;;
+esac
+rp='Try to understand large files?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set uselfs
+eval $setvar
+case "$uselfs" in
+"$define") use64bits="$define" ;;
+esac
+
+cat <<EOM
+
+Perl can be built to take advantage of explicit 64-bit interfaces,
+on some systems. To do so, Configure must be run with -Duse64bits.
+
+If this doesn't make any sense to you, just accept the default.
+EOM
+case "$use64bits" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+rp='Try to use explicit 64-bit interfaces, if available?'
+. ./myread
+case "$ans" in
+y|Y)
+ val="$define"
+ ;;
+*)
+ val="$undef"
+ ;;
+esac
+set use64bits
+eval $setvar
+
+case "$archname64" in
+'') archname64='' ;; # not a typo
+esac
+
+case "$use64bits" in
+"$define"|true|[yY]*)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that a 64 bit perl is to be built,
+: we may need to set or change some other defaults.
+ if $test -f use64bits.cbu; then
+ echo "Your platform has some specific hints for 64-bit builds, using them..."
+ . ./use64bits.cbu
+ else
+ $cat <<EOM
+(Your platform doesn't have any specific hints for 64-bit builds.
+ This is probably okay, especially if your system is a true 64-bit system.)
+EOM
+ case "$gccversion" in
+ '') ;;
+ *) $cat <<EOM
+But since you seem to be using gcc,
+I will now add -DUSE_LONG_LONG to the compilation flags.
+EOM
+ ccflags="$ccflags -DUSE_LONG_LONG"
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+: determine the architecture name
+echo " "
+if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
+ tarch=`arch`"-$osname"
+elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
+ if uname -m > tmparch 2>&1 ; then
+ tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
+ -e 's/$/'"-$osname/" tmparch`
+ else
+ tarch="$osname"
+ fi
+ $rm -f tmparch
+else
+ tarch="$osname"
+fi
+case "$myarchname" in
+''|"$tarch") ;;
+*)
echo "(Your architecture name used to be $myarchname.)"
archname=''
;;
privlibexp="$ansexp"
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installprivlib=`echo $privlibexp | sed 's#^$prefix#$installprefix#'`
+ installprivlib=`echo $privlibexp | sed "s#^$prefix#$installprefix#"`
else
installprivlib="$privlibexp"
fi
fi
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installarchlib=`echo $archlibexp | sed 's#^$prefix#$installprefix#'`
+ installarchlib=`echo $archlibexp | sed "s#^$prefix#$installprefix#"`
else
installarchlib="$archlibexp"
fi
-: make some quick guesses about what we are up against
-echo " "
-$echo $n "Hmm... $c"
-echo exit 1 >bsd
-echo exit 1 >usg
-echo exit 1 >v7
-echo exit 1 >osf1
-echo exit 1 >eunice
-echo exit 1 >xenix
-echo exit 1 >venix
-echo exit 1 >os2
-d_bsd="$undef"
-$cat /usr/include/signal.h /usr/include/sys/signal.h >foo 2>/dev/null
-if test -f /osf_boot || $contains 'OSF/1' /usr/include/ctype.h >/dev/null 2>&1
-then
- echo "Looks kind of like an OSF/1 system, but we'll see..."
- echo exit 0 >osf1
-elif test `echo abc | tr a-z A-Z` = Abc ; then
- xxx=`./loc addbib blurfl $pth`
- if $test -f $xxx; then
- echo "Looks kind of like a USG system with BSD features, but we'll see..."
- echo exit 0 >bsd
- echo exit 0 >usg
- else
- if $contains SIGTSTP foo >/dev/null 2>&1 ; then
- echo "Looks kind of like an extended USG system, but we'll see..."
- else
- echo "Looks kind of like a USG system, but we'll see..."
- fi
- echo exit 0 >usg
- fi
-elif $contains SIGTSTP foo >/dev/null 2>&1 ; then
- echo "Looks kind of like a BSD system, but we'll see..."
- d_bsd="$define"
- echo exit 0 >bsd
-else
- echo "Looks kind of like a Version 7 system, but we'll see..."
- echo exit 0 >v7
-fi
-case "$eunicefix" in
-*unixtovms*)
- $cat <<'EOI'
-There is, however, a strange, musty smell in the air that reminds me of
-something...hmm...yes...I've got it...there's a VMS nearby, or I'm a Blit.
-EOI
- echo exit 0 >eunice
- d_eunice="$define"
-: it so happens the Eunice I know will not run shell scripts in Unix format
- ;;
-*)
- echo " "
- echo "Congratulations. You aren't running Eunice."
- d_eunice="$undef"
+
+: Binary compatibility with 5.005 is not possible for builds
+: with advanced features
+case "$usethreads$usemultiplicity" in
+*define*)
+ bincompat5005="$undef"
+ d_bincompat5005="$undef"
;;
-esac
-: Detect OS2. The p_ variable is set above in the Head.U unit.
-case "$p_" in
-:) ;;
-*)
- $cat <<'EOI'
-I have the feeling something is not exactly right, however...don't tell me...
-lemme think...does HAL ring a bell?...no, of course, you're only running OS/2!
-EOI
- echo exit 0 >os2
+*) $cat <<EOM
+
+Perl 5.006 can be compiled for binary compatibility with 5.005.
+If you decide to do so, you will be able to continue using most
+of the extensions that were compiled for Perl 5.005.
+
+EOM
+ case "$bincompat5005$d_bincompat5005" in
+ *"$undef"*) dflt=n ;;
+ *) dflt=y ;;
+ esac
+ rp='Binary compatibility with Perl 5.005?'
+ . ./myread
+ case "$ans" in
+ y*) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ set d_bincompat5005
+ eval $setvar
+ case "$d_bincompat5005" in
+ "$define")
+ bincompat5005="$define"
+ ;;
+ *) bincompat5005="$undef"
+ d_bincompat5005="$undef"
+ ;;
+ esac
;;
esac
-if test -f /xenix; then
- echo "Actually, this looks more like a XENIX system..."
- echo exit 0 >xenix
- d_xenix="$define"
-else
- echo " "
- echo "It's not Xenix..."
- d_xenix="$undef"
-fi
-chmod +x xenix
-$eunicefix xenix
-if test -f /venix; then
- echo "Actually, this looks more like a VENIX system..."
- echo exit 0 >venix
-else
- echo " "
- if ./xenix; then
- : null
- else
- echo "Nor is it Venix..."
- fi
-fi
-chmod +x bsd usg v7 osf1 eunice xenix venix os2
-$eunicefix bsd usg v7 osf1 eunice xenix venix os2
-$rm -f foo
+
: see if setuid scripts can be secure
$cat <<EOM
set d_dosuid
eval $setvar
-: determine where manual pages are on this system
+: What should the include directory be ?
echo " "
-case "$sysman" in
-'')
- syspath='/usr/man/man1 /usr/man/mann /usr/man/manl /usr/man/local/man1'
- syspath="$syspath /usr/man/u_man/man1 /usr/share/man/man1"
- syspath="$syspath /usr/catman/u_man/man1 /usr/man/l_man/man1"
- syspath="$syspath /usr/local/man/u_man/man1 /usr/local/man/l_man/man1"
- syspath="$syspath /usr/man/man.L /local/man/man1 /usr/local/man/man1"
- sysman=`./loc . /usr/man/man1 $syspath`
- ;;
-esac
-if $test -d "$sysman"; then
- echo "System manual is in $sysman." >&4
-else
- echo "Could not find manual pages in source form." >&4
-fi
-
-: see what memory models we can support
-case "$models" in
-'')
- $cat >pdp11.c <<'EOP'
-int main() {
-#ifdef pdp11
- exit(0);
-#else
- exit(1);
+$echo $n "Hmm... $c"
+dflt='/usr/include'
+incpath=''
+mips_type=''
+if $test -f /bin/mips && /bin/mips; then
+ echo "Looks like a MIPS system..."
+ $cat >usr.c <<'EOCP'
+#ifdef SYSTYPE_BSD43
+/bsd43
#endif
-}
-EOP
- ( cc -o pdp11 pdp11.c ) >/dev/null 2>&1
- if $test -f pdp11 && ./pdp11 2>/dev/null; then
- dflt='unsplit split'
+EOCP
+ if $cc -E usr.c > usr.out && $contains / usr.out >/dev/null 2>&1; then
+ dflt='/bsd43/usr/include'
+ incpath='/bsd43'
+ mips_type='BSD 4.3'
else
- tans=`./loc . X /lib/small /lib/large /usr/lib/small /usr/lib/large /lib/medium /usr/lib/medium /lib/huge`
- case "$tans" in
- X) dflt='none';;
- *) if $test -d /lib/small || $test -d /usr/lib/small; then
- dflt='small'
- else
- dflt=''
- fi
- if $test -d /lib/medium || $test -d /usr/lib/medium; then
- dflt="$dflt medium"
- fi
- if $test -d /lib/large || $test -d /usr/lib/large; then
- dflt="$dflt large"
- fi
- if $test -d /lib/huge || $test -d /usr/lib/huge; then
- dflt="$dflt huge"
- fi
- esac
- fi;;
-*) dflt="$models";;
+ mips_type='System V'
+ fi
+ $rm -f usr.c usr.out
+ echo "and you're compiling with the $mips_type compiler and libraries."
+ xxx_prompt=y
+ echo "exit 0" >mips
+else
+ echo "Doesn't look like a MIPS system."
+ xxx_prompt=n
+ echo "exit 1" >mips
+fi
+chmod +x mips
+$eunicefix mips
+case "$usrinc" in
+'') ;;
+*) dflt="$usrinc";;
+esac
+case "$xxx_prompt" in
+y) fn=d/
+ echo " "
+ rp='Where are the include files you want to use?'
+ . ./getfile
+ usrinc="$ans"
+ ;;
+*) usrinc="$dflt"
+ ;;
esac
-$cat <<EOM
-
-Some systems have different model sizes. On most systems they are called
-small, medium, large, and huge. On the PDP11 they are called unsplit and
-split. If your system doesn't support different memory models, say "none".
-If you wish to force everything to one memory model, say "none" here and
-put the appropriate flags later when it asks you for other cc and ld flags.
-Venix systems may wish to put "none" and let the compiler figure things out.
-(In the following question multiple model names should be space separated.)
-
-The default for most systems is "none".
-EOM
-rp="Which memory models are supported?"
-. ./myread
-models="$ans"
+: see how we invoke the C preprocessor
+echo " "
+echo "Now, how can we feed standard input to your C preprocessor..." >&4
+cat <<'EOT' >testcpp.c
+#define ABC abc
+#define XYZ xyz
+ABC.XYZ
+EOT
+cd ..
+if test ! -f cppstdin; then
+ if test "X$osname" = "Xaix" -a "X$gccversion" = X; then
+ # AIX cc -E doesn't show the absolute headerfile
+ # locations but we'll cheat by using the -M flag.
+ echo 'cat >.$$.c; rm -f .$$.u; '"$cc"' ${1+"$@"} -M -c .$$.c 2>/dev/null; test -s .$$.u && awk '"'"'$2 ~ /\.h$/ { print "# 0 \""$2"\"" }'"'"' .$$.u; rm -f .$$.o .$$.u; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' > cppstdin
+ else
+ echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
+ fi
+else
+ echo "Keeping your $hint cppstdin wrapper."
+fi
+chmod 755 cppstdin
+wrapper=`pwd`/cppstdin
+ok='false'
+cd UU
-case "$models" in
-none)
- small=''
- medium=''
- large=''
- huge=''
- unsplit=''
- split=''
- ;;
-*split)
- case "$split" in
- '') if $contains '\-i' $sysman/ld.1 >/dev/null 2>&1 || \
- $contains '\-i' $sysman/cc.1 >/dev/null 2>&1; then
- dflt='-i'
+if $test "X$cppstdin" != "X" && \
+ $cppstdin $cppminus <testcpp.c >testcpp.out 2>&1 && \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+then
+ echo "You used to use $cppstdin $cppminus so we'll use that again."
+ case "$cpprun" in
+ '') echo "But let's see if we can live without a wrapper..." ;;
+ *)
+ if $cpprun $cpplast <testcpp.c >testcpp.out 2>&1 && \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+ then
+ echo "(And we'll use $cpprun $cpplast to preprocess directly.)"
+ ok='true'
else
- dflt='none'
- fi;;
- *) dflt="$split";;
- esac
- rp="What flag indicates separate I and D space?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';;
+ echo "(However, $cpprun $cpplast does not work, let's see...)"
+ fi
+ ;;
esac
- split="$tans"
- unsplit='';;
-*large*|*small*|*medium*|*huge*)
- case "$models" in
- *large*)
- case "$large" in
- '') dflt='-Ml';;
- *) dflt="$large";;
- esac
- rp="What flag indicates large model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- large="$tans";;
- *) large='';;
- esac
- case "$models" in
- *huge*) case "$huge" in
- '') dflt='-Mh';;
- *) dflt="$huge";;
- esac
- rp="What flag indicates huge model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- huge="$tans";;
- *) huge="$large";;
- esac
- case "$models" in
- *medium*) case "$medium" in
- '') dflt='-Mm';;
- *) dflt="$medium";;
- esac
- rp="What flag indicates medium model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- medium="$tans";;
- *) medium="$large";;
- esac
- case "$models" in
- *small*) case "$small" in
- '') dflt='none';;
- *) dflt="$small";;
- esac
- rp="What flag indicates small model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- small="$tans";;
- *) small='';;
- esac
- ;;
-*)
- echo "Unrecognized memory models--you may have to edit Makefile.SH" >&4
- ;;
-esac
-$rm -f pdp11.* pdp11
-
-: see if we need a special compiler
-echo " "
-if ./usg; then
- case "$cc" in
- '') case "$Mcc" in
- /*) dflt='Mcc';;
- *) case "$large" in
- -M*) dflt='cc';;
- *) if $contains '\-M' $sysman/cc.1 >/dev/null 2>&1 ; then
- if $contains '\-M' $sysman/cpp.1 >/dev/null 2>&1; then
- dflt='cc'
- else
- dflt='cc -M'
- fi
- else
- dflt='cc'
- fi;;
- esac;;
- esac;;
- *) dflt="$cc";;
- esac
- case "$dflt" in
- *M*) $cat <<'EOM'
-On some older systems the default C compiler will not resolve multiple global
-references that happen to have the same name. On some such systems the "Mcc"
-command may be used to force these to be resolved. On other systems a "cc -M"
-command is required. (Note that the -M flag on other systems indicates a
-memory model to use!) If you have the Gnu C compiler, you might wish to use
-that instead.
-
-EOM
- ;;
- esac
- rp="Use which C compiler?"
- . ./myread
- cc="$ans"
-else
- case "$cc" in
- '') dflt=cc;;
- *) dflt="$cc";;
- esac
- rp="Use which C compiler?"
- . ./myread
- cc="$ans"
-fi
-: Look for a hint-file generated 'call-back-unit'. Now that the
-: user has specified the compiler, we may need to set or change some
-: other defaults.
-if $test -f cc.cbu; then
- . ./cc.cbu
-fi
-echo " "
-echo "Checking for GNU cc in disguise and/or its version number..." >&4
-$cat >gccvers.c <<EOM
-#include <stdio.h>
-int main() {
-#ifdef __GNUC__
-#ifdef __VERSION__
- printf("%s\n", __VERSION__);
-#else
- printf("%s\n", "1");
-#endif
-#endif
- exit(0);
-}
-EOM
-if $cc -o gccvers gccvers.c; then
- gccversion=`./gccvers`
- case "$gccversion" in
- '') echo "You are not using GNU cc." ;;
- *) echo "You are using GNU cc $gccversion." ;;
- esac
-else
- echo " "
- echo "*** WHOA THERE!!! ***" >&4
- echo " Your C compiler \"$cc\" doesn't seem to be working!" >&4
- case "$knowitall" in
- '')
- echo " You'd better start hunting for one and let me know about it." >&4
- exit 1
- ;;
- esac
-fi
-$rm -f gccvers*
-case "$gccversion" in
-1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-esac
-
-: What should the include directory be ?
-echo " "
-$echo $n "Hmm... $c"
-dflt='/usr/include'
-incpath=''
-mips_type=''
-if $test -f /bin/mips && /bin/mips; then
- echo "Looks like a MIPS system..."
- $cat >usr.c <<'EOCP'
-#ifdef SYSTYPE_BSD43
-/bsd43
-#endif
-EOCP
- if $cc -E usr.c > usr.out && $contains / usr.out >/dev/null 2>&1; then
- dflt='/bsd43/usr/include'
- incpath='/bsd43'
- mips_type='BSD 4.3'
- else
- mips_type='System V'
- fi
- $rm -f usr.c usr.out
- echo "and you're compiling with the $mips_type compiler and libraries."
- xxx_prompt=y
- echo "exit 0" >mips
-else
- echo "Doesn't look like a MIPS system."
- xxx_prompt=n
- echo "exit 1" >mips
-fi
-chmod +x mips
-$eunicefix mips
-case "$usrinc" in
-'') ;;
-*) dflt="$usrinc";;
-esac
-case "$xxx_prompt" in
-y) fn=d/
- echo " "
- rp='Where are the include files you want to use?'
- . ./getfile
- usrinc="$ans"
- ;;
-*) usrinc="$dflt"
- ;;
-esac
-
-: see how we invoke the C preprocessor
-echo " "
-echo "Now, how can we feed standard input to your C preprocessor..." >&4
-cat <<'EOT' >testcpp.c
-#define ABC abc
-#define XYZ xyz
-ABC.XYZ
-EOT
-cd ..
-if test ! -f cppstdin; then
- echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
-else
- echo "Keeping your $hint cppstdin wrapper."
-fi
-chmod 755 cppstdin
-wrapper=`pwd`/cppstdin
-ok='false'
-cd UU
-
-if $test "X$cppstdin" != "X" && \
- $cppstdin $cppminus <testcpp.c >testcpp.out 2>&1 && \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
-then
- echo "You used to use $cppstdin $cppminus so we'll use that again."
- case "$cpprun" in
- '') echo "But let's see if we can live without a wrapper..." ;;
- *)
- if $cpprun $cpplast <testcpp.c >testcpp.out 2>&1 && \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
- then
- echo "(And we'll use $cpprun $cpplast to preprocess directly.)"
- ok='true'
- else
- echo "(However, $cpprun $cpplast does not work, let's see...)"
- fi
- ;;
- esac
-else
- case "$cppstdin" in
- '') ;;
- *)
- echo "Good old $cppstdin $cppminus does not seem to be of any help..."
- ;;
+else
+ case "$cppstdin" in
+ '') ;;
+ *)
+ echo "Good old $cppstdin $cppminus does not seem to be of any help..."
+ ;;
esac
fi
*) libs="$ans";;
esac
-: determine optimize, if desired, or use for debug flag also
+: determine optimization, if desired, or use for debug flag also
case "$optimize" in
' '|$undef) dflt='none';;
'') dflt='-O';;
esac
$cat <<EOH
-Some C compilers have problems with their optimizers. By default, $package
-compiles with the -O flag to use the optimizer. Alternately, you might want
-to use the symbolic debugger, which uses the -g flag (on traditional Unix
-systems). Either flag can be specified here. To use neither flag, specify
-the word "none".
+By default, $package compiles with the -O flag to use the optimizer.
+Alternately, you might want to use the symbolic debugger, which uses
+the -g flag (on traditional Unix systems). Either flag can be
+specified here. To use neither flag, specify the word "none".
EOH
rp="What optimizer/debugger flag should be used?"
: We will not override a previous value, but we might want to
: augment a hint file
case "$hint" in
-none|recommended)
+default|recommended)
case "$gccversion" in
1*) dflt='-fpcc-struct-return' ;;
esac
fi
;;
esac
+ case "$gccversion" in
+ 1*) ;;
+ 2.[0-8]*) ;;
+ ?*) echo " "
+ echo "Checking if your compiler accepts -fno-strict-aliasing" 2>&1
+ echo 'int main(void) { return 0; }' > gcctest.c
+ if $cc -O2 -fno-strict-aliasing -o gcctest gcctest.c; then
+ echo "Yes, it does." 2>&1
+ case "$ccflags" in
+ *strict-aliasing*)
+ echo "Leaving current flags $ccflags alone." 2>&1
+ ;;
+ *) dflt="$dflt -fno-strict-aliasing" ;;
+ esac
+ else
+ echo "Nope, it doesn't, but that's ok." 2>&1
+ fi
+ ;;
+ esac
;;
esac
esac
case "$hint" in
-none|recommended) dflt="$ccflags $dflt" ;;
+default|recommended) dflt="$ccflags $dflt" ;;
*) dflt="$ccflags";;
esac
vendorlibexp="$ansexp"
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installvendorlib=`echo $vendorlibexp | $sed 's#^$prefix#$installprefix#'`
+ installvendorlib=`echo $vendorlibexp | $sed "s#^$prefix#$installprefix#"`
else
installvendorlib="$vendorlibexp"
fi
: Change installation prefix, if necessary.
: XXX Bug? -- ignores Configure -Dinstallprefix setting.
if $test X"$prefix" != X"$installprefix"; then
- installbin=`echo $binexp | sed 's#^$prefix#$installprefix#'`
+ installbin=`echo $binexp | sed "s#^$prefix#$installprefix#"`
else
installbin="$binexp"
fi
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installman1dir=`echo $man1direxp | $sed 's#^$prefix#$installprefix#'`
+ installman1dir=`echo $man1direxp | $sed "s#^$prefix#$installprefix#"`
else
installman1dir="$man1direxp"
fi
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installman3dir=`echo $man3direxp | $sed 's#^$prefix#$installprefix#'`
+ installman3dir=`echo $man3direxp | $sed "s#^$prefix#$installprefix#"`
else
installman3dir="$man3direxp"
fi
scriptdirexp="$ansexp"
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installscript=`echo $scriptdirexp | sed 's#^$prefix#$installprefix#'`
+ installscript=`echo $scriptdirexp | sed "s#^$prefix#$installprefix#"`
else
installscript="$scriptdirexp"
fi
sitelibexp="$ansexp"
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installsitelib=`echo $sitelibexp | sed 's#^$prefix#$installprefix#'`
+ installsitelib=`echo $sitelibexp | sed "s#^$prefix#$installprefix#"`
else
installsitelib="$sitelibexp"
fi
sitearchexp="$ansexp"
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installsitearch=`echo $sitearchexp | sed 's#^$prefix#$installprefix#'`
+ installsitearch=`echo $sitearchexp | sed "s#^$prefix#$installprefix#"`
else
installsitearch="$sitearchexp"
fi
cat <<EOM
-Previous version of $package used the standard IO mechanisms as defined
-in <stdio.h>. Versions 5.003_02 and later of perl allow alternate IO
-mechanisms via a "PerlIO" abstraction, but the stdio mechanism is still
-the default. This abstraction layer can use AT&T's sfio (if you already
-have sfio installed) or regular stdio. Using PerlIO with sfio may cause
-problems with some extension modules. Using PerlIO with stdio is safe,
-but it is slower than plain stdio and therefore is not the default.
+Perl can be built to take advantage of long doubles which
+(if available) may give more accuracy and range for floating point
+numbers. To do so, Configure must be run with -Duselongdouble.
If this doesn't make any sense to you, just accept the default 'n'.
EOM
-case "$useperlio" in
+case "$uselongdouble" in
$define|true|[yY]*) dflt='y';;
*) dflt='n';;
esac
-rp='Use the experimental PerlIO abstraction layer?'
+rp='Try to use long doubles if available?'
. ./myread
case "$ans" in
-y|Y)
- val="$define"
- ;;
-*)
- echo "Ok, doing things the stdio way"
- val="$undef"
- ;;
+y|Y) val="$define" ;;
+*) val="$undef" ;;
esac
-set useperlio
-eval $setvar
+set uselongdouble
+eval $setvar
-: Check how to convert floats to strings.
-if test "X$d_Gconvert" = X; then
- echo " "
+case "$uselongdouble" in
+"$define"|true|[yY]*)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that long doubles should be used,
+: we may need to set or change some other defaults.
+ if $test -f uselongdouble.cbu; then
+ echo "Your platform has some specific hints for long doubles, using them..."
+ . ./uselongdouble.cbu
+ else
+ $cat <<EOM
+(Your platform doesn't have any specific hints for long doubles.)
+EOM
+ fi
+ ;;
+esac
+
+cat <<EOM
+
+Previous version of $package used the standard IO mechanisms as defined
+in <stdio.h>. Versions 5.003_02 and later of perl allow alternate IO
+mechanisms via a "PerlIO" abstraction, but the stdio mechanism is still
+the default. This abstraction layer can use AT&T's sfio (if you already
+have sfio installed) or regular stdio. Using PerlIO with sfio may cause
+problems with some extension modules. Using PerlIO with stdio is safe,
+but it is slower than plain stdio and therefore is not the default.
+
+If this doesn't make any sense to you, just accept the default 'n'.
+EOM
+case "$useperlio" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+rp='Use the experimental PerlIO abstraction layer?'
+. ./myread
+case "$ans" in
+y|Y)
+ val="$define"
+ ;;
+*)
+ echo "Ok, doing things the stdio way"
+ val="$undef"
+ ;;
+esac
+set useperlio
+eval $setvar
+
+: Check how to convert floats to strings.
+if test "X$d_Gconvert" = X; then
+ echo " "
echo "Checking for an efficient way to convert floats to strings."
$cat >try.c <<'EOP'
#ifdef TRY_gconvert
*) xxx_list='gconvert gcvt sprintf' ;;
esac
- for xxx_convert in $xxx_list; do
- echo "Trying $xxx_convert"
- $rm -f try try$_o
- set try -DTRY_$xxx_convert
- if eval $compile; then
- echo "$xxx_convert" found. >&4
- if ./try; then
- echo "I'll use $xxx_convert to convert floats into a string." >&4
- break;
- else
- echo "...But $xxx_convert didn't work as I expected."
- fi
- else
- echo "$xxx_convert NOT found." >&4
- fi
- done
-
- case "$xxx_convert" in
- gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
- gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
- *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
- esac
+ for xxx_convert in $xxx_list; do
+ echo "Trying $xxx_convert"
+ $rm -f try try$_o
+ set try -DTRY_$xxx_convert
+ if eval $compile; then
+ echo "$xxx_convert" found. >&4
+ if ./try; then
+ echo "I'll use $xxx_convert to convert floats into a string." >&4
+ break;
+ else
+ echo "...But $xxx_convert didn't work as I expected."
+ fi
+ else
+ echo "$xxx_convert NOT found." >&4
+ fi
+ done
+
+ case "$xxx_convert" in
+ gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
+ gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
+ *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
+ esac
+fi
+
+: see if inttypes.h is available
+: we want a real compile instead of Inhdr because some systems
+: have an inttypes.h which includes non-existent headers
+echo " "
+$cat >try.c <<EOCP
+#include <inttypes.h>
+int main() {
+ static int32_t foo32 = 0x12345678;
+}
+EOCP
+set try
+if eval $compile; then
+ echo "<inttypes.h> found." >&4
+ val="$define"
+else
+ echo "<inttypes.h> NOT found." >&4
+ val="$undef"
+fi
+$rm -f try.c try
+set i_inttypes
+eval $setvar
+
+: check for int64_t
+case "$use64bits" in
+"$define" )
+ echo " "
+ echo $n "Checking to see if your system supports int64_t...$c" >&4
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+#$i_inttypes I_INTTYPES
+#ifdef I_INTTYPES
+#include <inttypes.h>
+#endif
+int64_t foo() { int64_t x; x = 7; return x; }
+EOCP
+ if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define"
+ echo " Yup, it does." >&4
+ else
+ val="$undef"
+ echo " Nope, it doesn't." >&4
+ fi
+ $rm -f try.*
+ ;;
+*) val="$undef"
+ ;;
+esac
+set d_int64t
+eval $setvar
+
+
+: check for lengths of integral types
+echo " "
+case "$intsize" in
+'')
+ echo "Checking to see how big your integers are..." >&4
+ $cat >intsize.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("intsize=%d;\n", sizeof(int));
+ printf("longsize=%d;\n", sizeof(long));
+ printf("shortsize=%d;\n", sizeof(short));
+ exit(0);
+}
+EOCP
+ set intsize
+ if eval $compile_ok && ./intsize > /dev/null; then
+ eval `./intsize`
+ echo "Your integers are $intsize bytes long."
+ echo "Your long integers are $longsize bytes long."
+ echo "Your short integers are $shortsize bytes long."
+ else
+ $cat >&4 <<EOM
+!
+Help! I can't compile and run the intsize test program: please enlighten me!
+(This is probably a misconfiguration in your system or libraries, and
+you really ought to fix it. Still, I'll try anyway.)
+!
+EOM
+ dflt=4
+ rp="What is the size of an integer (in bytes)?"
+ . ./myread
+ intsize="$ans"
+ dflt=$intsize
+ rp="What is the size of a long integer (in bytes)?"
+ . ./myread
+ longsize="$ans"
+ dflt=2
+ rp="What is the size of a short integer (in bytes)?"
+ . ./myread
+ shortsize="$ans"
+ fi
+ ;;
+esac
+$rm -f intsize intsize.*
+
+: check for long long
+echo " "
+echo $n "Checking to see if your system supports long long...$c" >&4
+echo 'long long foo() { long long x; x = 7; return x; }' > try.c
+if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define"
+ echo " Yup, it does." >&4
+else
+ val="$undef"
+ echo " Nope, it doesn't." >&4
+fi
+$rm try.*
+set d_longlong
+eval $setvar
+
+: check for length of long long
+case "${d_longlong}${longlongsize}" in
+$define)
+ echo " "
+ $echo $n "Checking to see how big your long longs are...$c" >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", sizeof(long long));
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ longlongsize=`./try`
+ $echo " $longlongsize bytes." >&4
+ else
+ dflt='8'
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of a long long (in bytes)?"
+ . ./myread
+ longlongsize="$ans"
+ fi
+ if $test "X$longsize" = "X$longlongsize"; then
+ echo "(That isn't any different from an ordinary long.)"
+ fi
+ ;;
+esac
+$rm -f try.c try
+
+echo " "
+
+if $test X"$intsize" = X8 -o X"$longsize" = X8 -o X"$d_int64t" = X"$define" -o X"$d_longlong" = X"$define"; then
+
+echo "Checking how to print 64-bit integers..." >&4
+
+if $test X"$sPRId64" = X -a X"$intsize" = X8; then
+ quad=int
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ int q = 12345678901;
+ printf("%ld\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64='"d"'; sPRIi64='"i"'; sPRIu64='"u"';
+ sPRIo64='"o"'; sPRIx64='"x"'; sPRIX64='"X"';
+ echo "We will use %d."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRId64" = X -a X"$longsize" = X8; then
+ quad=long
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long q = 12345678901;
+ printf("%ld\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64='"ld"'; sPRIi64='"li"'; sPRIu64='"lu"';
+ sPRIo64='"lo"'; sPRIx64='"lx"'; sPRIX64='"lX"';
+ echo "We will use %ld."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRId64" = X -a X"$i_inttypes.h" = X"$define" -a X"$d_int64t" = X"$define"; then
+ quad=int64_t
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <inttypes.h>
+#include <stdio.h>
+int main() {
+ int64_t q = 12345678901;
+ printf("%" PRId64 "\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64=PRId64; sPRIi64=PRIi64; sPRIu64=PRIu64;
+ sPRIo64=PRIo64; sPRIx64=PRIx64; sPRIX64=PRIX64;
+ echo "We will use the C9X style."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRId64" = X -a X"$d_longlong" = X"$define" -a X"$longlongsize" = X8; then
+ quad="long long"
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long long q = 12345678901LL; /* AIX cc requires the LL prefix. */
+ printf("%lld\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64='"lld"'; sPRIi64='"lli"'; sPRIu64='"llu"';
+ sPRIo64='"llo"'; sPRIx64='"llx"'; sPRIX64='"llX"';
+ echo "We will use the %lld style."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRId64" = X -a X"$quad" != X; then
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ $quad q = 12345678901;
+ printf("%Ld\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64='"Ld"'; sPRIi64='"Li"'; sPRIu64='"Lu"';
+ sPRIo64='"Lo"'; sPRIx64='"Lx"'; sPRIX64='"LX"';
+ echo "We will use %lld."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRId64" = X -a X"$quad" != X; then
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ $quad q = 12345678901;
+ printf("%qd\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64='"qd"'; sPRIi64='"qi"'; sPRIu64='"qu"';
+ sPRIo64='"qo"'; sPRIx64='"qx"'; sPRIX64='"qX"';
+ echo "We will use %qd."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRId64" = X; then
+ echo "Cannot figure out how to print 64-bit integers." >&4
+fi
+
+$rm -f try try.*
+
+fi # intsize -o longsize -o d_int64t -o d_longlong
+
+case "$sPRId64" in
+'') d_PRId64="$undef"; d_PRIi64="$undef"; d_PRIu64="$undef";
+ d_PRIo64="$undef"; d_PRIx64="$undef"; d_PRIX64="$undef";
+ ;;
+*) d_PRId64="$define"; d_PRIi64="$define"; d_PRIu64="$define";
+ d_PRIo64="$define"; d_PRIx64="$define"; d_PRIX64="$define";
+ ;;
+esac
+
+: check for length of double
+echo " "
+case "$doublesize" in
+'')
+ $echo $n "Checking to see how big your double precision numbers are...$c" >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", sizeof(double));
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ doublesize=`./try`
+ $echo " $doublesize bytes." >&4
+ else
+ dflt='8'
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of a double precision number (in bytes)?"
+ . ./myread
+ doublesize="$ans"
+ fi
+ ;;
+esac
+$rm -f try.c try
+
+: check for long doubles
+echo " "
+echo $n "Checking to see if your system supports long double...$c" >&4
+echo 'long double foo() { long double x; x = 7.0; return x; }' > try.c
+if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define"
+ echo " Yup, it does." >&4
+else
+ val="$undef"
+ echo " Nope, it doesn't." >&4
+fi
+$rm try.*
+set d_longdbl
+eval $setvar
+
+: check for length of long double
+case "${d_longdbl}${longdblsize}" in
+$define)
+ echo " "
+ $echo $n "Checking to see how big your long doubles are...$c" >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", sizeof(long double));
+}
+EOCP
+ set try
+ if eval $compile; then
+ longdblsize=`./try`
+ $echo " $longdblsize bytes." >&4
+ else
+ dflt='8'
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)" >&4
+ rp="What is the size of a long double (in bytes)?"
+ . ./myread
+ longdblsize="$ans"
+ fi
+ if $test "X$doublesize" = "X$longdblsize"; then
+ echo "(That isn't any different from an ordinary double.)"
+ fi
+ ;;
+esac
+$rm -f try.c try
+
+echo " "
+
+if $test X"$d_longdbl" = X"$define"; then
+
+echo "Checking how to print long doubles..." >&4
+
+if $test X"$sPRIfldbl" = X -a X"$doublesize" = X"$longdblsize"; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ double d = 123.456;
+ printf("%.3f\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"f"'; sPRIgldbl='"g"'; sPRIeldbl='"e"';
+ sPRIFldbl='"F"'; sPRIGldbl='"G"'; sPRIEldbl='"E"';
+ echo "We will use %f."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRIfldbl" = X; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long double d = 123.456;
+ printf("%.3llf\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"llf"'; sPRIgldbl='"llg"'; sPRIeldbl='"lle"';
+ sPRIFldbl='"llF"'; sPRIGldbl='"llG"'; sPRIEldbl='"llE"';
+ echo "We will use %llf."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRIfldbl" = X; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long double d = 123.456;
+ printf("%.3Lf\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"Lf"'; sPRIgldbl='"Lg"'; sPRIeldbl='"Le"';
+ sPRIFldbl='"LF"'; sPRIGldbl='"LG"'; sPRIEldbl='"LE"';
+ echo "We will use %Lf."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRIfldbl" = X; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long double d = 123.456;
+ printf("%.3lf\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"lf"'; sPRIgldbl='"lg"'; sPRIeldbl='"le"';
+ sPRIFldbl='"lF"'; sPRIGldbl='"lG"'; sPRIEldbl='"lE"';
+ echo "We will use %lf."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRIfldbl" = X; then
+ echo "Cannot figure out how to print long doubles." >&4
fi
+$rm -f try try.*
+
+fi # d_longdbl
+
+case "$sPRIfldbl" in
+'') d_PRIfldbl="$undef"; d_PRIgldbl="$undef"; d_PRIeldbl="$undef";
+ d_PRIFldbl="$undef"; d_PRIGldbl="$undef"; d_PRIEldbl="$undef";
+ ;;
+*) d_PRIfldbl="$define"; d_PRIgldbl="$define"; d_PRIeldbl="$define";
+ d_PRIFldbl="$define"; d_PRIGldbl="$define"; d_PRIEldbl="$define";
+ ;;
+esac
+
: Initialize h_fcntl
h_fcntl=false
set alarm d_alarm
eval $inlibc
+: see if atolf exists
+set atolf d_atolf
+eval $inlibc
+
+: see if atoll exists
+set atoll d_atoll
+eval $inlibc
+
: Look for GNU-cc style attribute checking
echo " "
echo "Checking whether your compiler can handle __attribute__ ..." >&4
set bzero d_bzero
eval $inlibc
-: check for lengths of integral types
-echo " "
-case "$intsize" in
-'')
- echo "Checking to see how big your integers are..." >&4
- $cat >intsize.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("intsize=%d;\n", sizeof(int));
- printf("longsize=%d;\n", sizeof(long));
- printf("shortsize=%d;\n", sizeof(short));
- exit(0);
-}
-EOCP
- set intsize
- if eval $compile_ok && ./intsize > /dev/null; then
- eval `./intsize`
- echo "Your integers are $intsize bytes long."
- echo "Your long integers are $longsize bytes long."
- echo "Your short integers are $shortsize bytes long."
- else
- $cat >&4 <<EOM
-!
-Help! I can't compile and run the intsize test program: please enlighten me!
-(This is probably a misconfiguration in your system or libraries, and
-you really ought to fix it. Still, I'll try anyway.)
-!
-EOM
- dflt=4
- rp="What is the size of an integer (in bytes)?"
- . ./myread
- intsize="$ans"
- dflt=$intsize
- rp="What is the size of a long integer (in bytes)?"
- . ./myread
- longsize="$ans"
- dflt=2
- rp="What is the size of a short integer (in bytes)?"
- . ./myread
- shortsize="$ans"
- fi
- ;;
-esac
-$rm -f intsize intsize.*
-
: see if signal is declared as pointer to function returning int or void
echo " "
xxx=`./findhdr signal.h`
set d_dbl_dig
eval $setvar
-
-if $test X"$use64bits" = X"$define"; then
- : see if dbminit64 exists
- set dbminit64 d_dbminit64
- eval $inlibc
-
- : see if dbmclose64 exists
- set dbmclose64 d_dbmclose64
- eval $inlibc
-
- : see if fetch64 exists
- set fetch64 d_fetch64
- eval $inlibc
-
- : see if store64 exists
- set store64 d_store64
- eval $inlibc
-
- : see if delete64 exists
- set delete64 d_delete64
- eval $inlibc
-
- : see if firstkey64 exists
- set firstkey64 d_firstkey64
- eval $inlibc
-
- : see if nextkey64 exists
- set nextkey64 d_nextkey64
- eval $inlibc
-else
- val="$undef"
- for xxx in d_dbminit64 d_dbmclose64 d_fetch64 d_store64 d_delete64 d_firstkey64 d_nextkey64
- do
- set $xxx
- eval $setvar
- done
-fi
-
: see if difftime exists
set difftime d_difftime
eval $inlibc
-: see if sys/stat.h is available
-set sys/stat.h i_sysstat
-eval $inhdr
-
: see if this is a dirent system
echo " "
if xinc=`./findhdr dirent.h`; $test "$xinc"; then
eval $setvar
$rm -f try.c
-
-if $test X"$use64bits" = X"$define"; then
- : see if fstat64 exists
- set fstat64 d_fstat64
- eval $inlibc
-
- : see if ftruncate64 exists
- set ftruncate64 d_ftruncate64
- eval $inlibc
-
- : see if lockf64 exists
- set lockf64 d_lockf64
- eval $inlibc
-
- : see if llseek exists
- set llseek d_llseek
- eval $inlibc
-
- : see if lseek64 exists
- set lseek64 d_lseek64
- eval $inlibc
-
- : see if lstat64 exists
- set lstat64 d_lstat64
- eval $inlibc
-
- : see if open64 exists
- set open64 d_open64
- eval $inlibc
-
- : see if opendir64 exists
- set opendir64 d_opendir64
- eval $inlibc
-
- : see if readdir64 exists
- set readdir64 d_readdir64
- eval $inlibc
-
- : see if seekdir64 exists
- set seekdir64 d_seekdir64
- eval $inlibc
-
- : see if stat64 exists
- set stat64 d_stat64
- eval $inlibc
-
- : see if telldir64 exists
- set telldir64 d_telldir64
- eval $inlibc
-
- : see if truncate64 exists
- set truncate64 d_truncate64
- eval $inlibc
-
- : check for off64_t
- echo " "
- echo $n "Checking to see if your system supports off64_t...$c" >&4
- $cat >try.c <<EOCP
-#include <sys/types.h>
-#include <unistd.h>
-off64_t foo() { off64_t x; x = 7; return x; }'
-EOCP
- if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define"
- echo " Yup, it does." >&4
- else
- val="$undef"
- echo " Nope, it doesn't." >&4
- fi
- $rm -f try.*
- set d_off64_t
- eval $setvar
-
- : check for offset_t
- echo " "
- echo $n "Checking to see if your system supports offset_t...$c" >&4
- $cat >try.c <<EOCP
-#include <sys/types.h>
-#include <unistd.h>
-offset_t foo() { offset_t x; x = 7; return x; }'
-EOCP
- if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define"
- echo " Yup, it does." >&4
- else
- val="$undef"
- echo " Nope, it doesn't." >&4
- fi
- $rm -f try.*
- set d_offset_t
- eval $setvar
-
- : check for ino64_t
- echo " "
- echo $n "Checking to see if your system supports ino64_t...$c" >&4
- val="$undef"
- case "$i_sysstat" in
- "$define" )
- $cat >try.c <<EOCP
-#include <sys/types.h>
-#include <sys/stat.h>
-ino64_t foo() { ino64_t x; x = 7; return x; }'
-EOCP
- if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define"
- fi
- $rm -f try.*
- ;;
- esac
- if $test "X$val" = X"$define"; then
- echo " Yup, it does." >&4
- else
- echo " Nope, it doesn't." >&4
- fi
- set d_ino64_t
- eval $setvar
-
- : check for struct flock64
- echo " "
- echo "Checking to see if your system supports struct flock64..." >&4
- if $h_fcntl; then
- set d_flock64_s flock64 l_len define fcntl.h
- eval $hasfield
- else
- val="$undef"
- set d_flock64_s
- eval $setvar
- fi
- case "$d_flock64_s" in
- "$define") echo "Yup, it does." >&4
- ;;
- *) echo "Nope, it doesn't." >&4
- ;;
- esac
-
- : check for struct dirent64
- echo " "
- echo "Checking to see if your system supports struct dirent64..." >&4
- set d_dirent64_s dirent64 d_off $i_dirent dirent.h
- eval $hasfield
- case "$d_dirent64_s" in
- "$define") echo "Yup, it does." >&4
- ;;
- *) echo "Nope, it doesn't." >&4
- ;;
- esac
-
-else
- val="$undef"
- for xxx in d_fstat64 d_ftruncate64 d_lockf64 d_lseek64 d_lstat64 d_open64 d_opendir64 d_readdir64 d_seekdir64 d_stat64 d_telldir64 d_truncate64 d_off64_t d_offset_t d_ino64_t d_flock64_s d_dirent64_s
- do
- set $xxx
- eval $setvar
- done
-fi
-
: see if dlerror exists
xxx_runnm="$runnm"
runnm=false
esac
else
echo "I can't compile and run the test program." >&4
+ echo "I'm guessing that dlsym doesn't need a leading underscore." >&4
fi
;;
esac
Hmm, your compiler has some difficulty with fd_set. Checking further...
EOM
set fd_set
- if eval $compile; then
- d_fds_bits="$undef"
- d_fd_set="$define"
- echo "Well, your system has some sort of fd_set available..." >&4
- if ./fd_set; then
- echo "and you have the normal fd_set macros." >&4
- d_fd_macros="$define"
- else
- $cat <<'EOM'
-but not the normal fd_set macros! Gross! More work for me...
-EOM
- d_fd_macros="$undef"
- fi
- else
- echo "Well, you got zip. That's OK, I can roll my own fd_set stuff." >&4
- d_fd_set="$undef"
- d_fds_bits="$undef"
- d_fd_macros="$undef"
- fi
-fi
-$rm -f fd_set*
-
-: see if fgetpos exists
-set fgetpos d_fgetpos
-eval $inlibc
-
-
-if $test X"$use64bits" = X"$define"; then
- : see if fgetpos64 exists
- set fgetpos64 d_fgetpos64
- eval $inlibc
-
- : see if fopen64 exists
- set freopen64 d_fopen64
- eval $inlibc
-
- : see if freopen64 exists
- set freopen64 d_freopen64
- eval $inlibc
-
- : see if fseek64 exists
- set fseek64 d_fseek64
- eval $inlibc
-
- : see if fseeko64 exists
- set fseeko64 d_fseeko64
- eval $inlibc
-
- : see if fsetpos64 exists
- set fsetpos64 d_fsetpos64
- eval $inlibc
-
- : see if ftell64 exists
- set ftell64 d_ftell64
- eval $inlibc
-
- : see if ftello64 exists
- set ftello64 d_ftello64
- eval $inlibc
-
- : see if tmpfile64 exists
- set tmpfile64 d_tmpfile64
- eval $inlibc
-else
- val="$undef"
- for xxx in d_fgetpos64 d_fopen64 d_freopen64 d_fseek64 d_fseeko64 d_fsetpos64 d_ftell64 d_ftello64 d_tmpfile64
- do
- set $xxx
- eval $setvar
- done
+ if eval $compile; then
+ d_fds_bits="$undef"
+ d_fd_set="$define"
+ echo "Well, your system has some sort of fd_set available..." >&4
+ if ./fd_set; then
+ echo "and you have the normal fd_set macros." >&4
+ d_fd_macros="$define"
+ else
+ $cat <<'EOM'
+but not the normal fd_set macros! Gross! More work for me...
+EOM
+ d_fd_macros="$undef"
+ fi
+ else
+ echo "Well, you got zip. That's OK, I can roll my own fd_set stuff." >&4
+ d_fd_set="$undef"
+ d_fds_bits="$undef"
+ d_fd_macros="$undef"
+ fi
fi
+$rm -f fd_set*
+
+: see if fgetpos exists
+set fgetpos d_fgetpos
+eval $inlibc
: see if flock exists
set flock d_flock
set fpathconf d_fpathconf
eval $inlibc
+
+: see if llseek exists
+set llseek d_llseek
+eval $inlibc
+
+: check for off64_t
+echo " "
+echo $n "Checking to see if your system supports off64_t...$c" >&4
+$cat >try.c <<EOCP
+#include <sys/types.h>
+#include <unistd.h>
+off64_t foo() { off64_t x; x = 7; return x; }'
+EOCP
+if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define"
+ echo " Yup, it does." >&4
+else
+ val="$undef"
+ echo " Nope, it doesn't." >&4
+fi
+$rm -f try.*
+set d_off64_t
+eval $setvar
+
+: check for fpos64_t
+echo " "
+echo $n "Checking to see if your system supports fpos64_t...$c" >&4
+$cat >try.c <<EOCP
+#include <sys/stdio.h>
+fpos64_t foo() { fpos64_t x; x = 7; return x; }'
+EOCP
+if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define"
+ echo " Yup, it does." >&4
+else
+ val="$undef"
+ echo " Nope, it doesn't." >&4
+fi
+$rm -f try.*
+set d_fpos64_t
+eval $setvar
+
: see if fseeko exists
set fseeko d_fseeko
eval $inlibc
set inet_aton d_inetaton
eval $inlibc
-: see if inttypes.h is available
-: we want a real compile instead of Inhdr because some systems
-: have an inttypes.h which includes non-existent headers
-echo " "
-$cat >try.c <<EOCP
-#include <inttypes.h>
-int main() {
- static int32_t foo32 = 0x12345678;
-}
-EOCP
-set try
-if eval $compile; then
- echo "<inttypes.h> found." >&4
- val="$define"
-else
- echo "<inttypes.h> NOT found." >&4
- val="$undef"
-fi
-$rm -f try.c try
-set i_inttypes
-eval $setvar
-
-: check for int64_t
-case "$use64bits" in
-"$define" )
- echo " "
- echo $n "Checking to see if your system supports int64_t...$c" >&4
- $cat >try.c <<EOCP
-#include <sys/types.h>
-#$i_inttypes I_INTTYPES
-#ifdef I_INTTYPES
-#include <inttypes.h>
-#endif
-int64_t foo() { int64_t x; x = 7; return x; }
-EOCP
- if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define"
- echo " Yup, it does." >&4
- else
- val="$undef"
- echo " Nope, it doesn't." >&4
- fi
- $rm -f try.*
- ;;
-*) val="$undef"
- ;;
-esac
-set d_int64t
-eval $setvar
-
-
: Look for isascii
echo " "
$cat >isascii.c <<'EOCP'
set d_lchown
eval $setvar
+: See if number of significant digits in a double precision number is known
+echo " "
+$cat >ldbl_dig.c <<EOM
+#$i_limits I_LIMITS
+#$i_float I_FLOAT
+#ifdef I_LIMITS
+#include <limits.h>
+#endif
+#ifdef I_FLOAT
+#include <float.h>
+#endif
+#ifdef LDBL_DIG
+printf("Contains LDBL_DIG");
+#endif
+EOM
+$cppstdin $cppflags $cppminus < ldbl_dig.c >ldbl_dig.E 2>/dev/null
+if $contains 'LDBL_DIG' ldbl_dig.E >/dev/null 2>&1; then
+ echo "LDBL_DIG found." >&4
+ val="$define"
+else
+ echo "LDBL_DIG NOT found." >&4
+ val="$undef"
+fi
+$rm -f ldbl_dig.?
+set d_ldbl_dig
+eval $setvar
+
: see if link exists
set link d_link
eval $inlibc
set lockf d_lockf
eval $inlibc
-: check for length of double
-echo " "
-case "$doublesize" in
-'')
- $echo $n "Checking to see how big your double precision numbers are...$c" >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", sizeof(double));
-}
-EOCP
- set try
- if eval $compile_ok; then
- doublesize=`./try`
- $echo " $doublesize bytes." >&4
- else
- dflt='8'
- echo "(I can't seem to compile the test program. Guessing...)"
- rp="What is the size of a double precision number (in bytes)?"
- . ./myread
- doublesize="$ans"
- fi
- ;;
-esac
-$rm -f try.c try
-
-: check for long doubles
-echo " "
-echo $n "Checking to see if your system supports long doubles...$c" >&4
-echo 'long double foo() { long double x; x = 7.0; return x; }' > try.c
-if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define"
- echo " Yup, it does." >&4
-else
- val="$undef"
- echo " Nope, it doesn't." >&4
-fi
-$rm try.*
-set d_longdbl
-eval $setvar
-
-: check for length of long double
-case "${d_longdbl}${longdblsize}" in
-$define)
- echo " "
- $echo $n "Checking to see how big your long doubles are...$c" >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", sizeof(long double));
-}
-EOCP
- set try
- if eval $compile; then
- longdblsize=`./try`
- $echo " $longdblsize bytes." >&4
- else
- dflt='8'
- echo " "
- echo "(I can't seem to compile the test program. Guessing...)" >&4
- rp="What is the size of a long double (in bytes)?"
- . ./myread
- longdblsize="$ans"
- fi
- if $test "X$doublesize" = "X$longdblsize"; then
- echo "(That isn't any different from an ordinary double.)"
- fi
- ;;
-esac
-$rm -f try.c try
-
-: check for long long
-echo " "
-echo $n "Checking to see if your system supports long long...$c" >&4
-echo 'long long foo() { long long x; x = 7; return x; }' > try.c
-if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define"
- echo " Yup, it does." >&4
-else
- val="$undef"
- echo " Nope, it doesn't." >&4
-fi
-$rm try.*
-set d_longlong
-eval $setvar
-
-: check for length of long long
-case "${d_longlong}${longlongsize}" in
-$define)
- echo " "
- $echo $n "Checking to see how big your long longs are...$c" >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", sizeof(long long));
-}
-EOCP
- set try
- if eval $compile_ok; then
- longlongsize=`./try`
- $echo " $longlongsize bytes." >&4
- else
- dflt='8'
- echo " "
- echo "(I can't seem to compile the test program. Guessing...)"
- rp="What is the size of a long long (in bytes)?"
- . ./myread
- longlongsize="$ans"
- fi
- if $test "X$longsize" = "X$longlongsize"; then
- echo "(That isn't any different from an ordinary long.)"
- fi
- ;;
-esac
-$rm -f try.c try
-
: see if lstat exists
set lstat d_lstat
eval $inlibc
eval $inlibc
: see if POSIX threads are available
-if test "X$usethreads" = "X$define"; then
- set pthread.h i_pthread
- eval $inhdr
-else
- i_pthread="$undef"
-fi
+set pthread.h i_pthread
+eval $inhdr
+
int main()
{
struct sigaction act, oact;
+ act.sa_flags = 0;
+ oact.sa_handler = 0;
}
EOP
set try
eval $setvar
$rm -f try.c try
+: see if sys/stat.h is available
+set sys/stat.h i_sysstat
+eval $inhdr
+
: see if stat knows about block sizes
echo " "
set d_statblks stat st_blocks $i_sysstat sys/stat.h
set strtoul d_strtoul
eval $inlibc
+: see if strtoull exists
+set strtoull d_strtoull
+eval $inlibc
+
: see if strxfrm exists
set strxfrm d_strxfrm
eval $inlibc
skipping the byteorder check.
EOM
- byteorder=''
+ byteorder='0xffff'
;;
*)
case "$byteorder" in
In the following, larger digits indicate more significance. A big-endian
machine like a Pyramid or a Motorola 680?0 chip will come out to 4321. A
little-endian machine like a Vax or an Intel 80?86 chip would be 1234. Other
-machines may have weird orders like 3412. A Cray will report 87654321. If
-the test program works the default is probably right.
+machines may have weird orders like 3412. A Cray will report 87654321,
+an Alpha will report 12345678. If the test program works the default is
+probably right.
I'm now running the test program...
EOM
$cat >try.c <<'EOCP'
eval $find_extensions;
cd ..;
shift;
- fi
+ fi;
fi
;;
- esac
+ esac;
done'
tdir=`pwd`
cd $rsrc/ext
echo " "
echo "Stripping down executable paths..." >&4
for file in $loclist $trylist; do
- if test X$file != Xln -a X$file != Xar -o X$osname != Xos2; then
- eval $file="\$file"
- fi
+ eval temp=\$$file
+ eval $file=`basename $temp`
done
;;
esac
baserev='$baserev'
bash='$bash'
bin='$bin'
+bincompat5005='$bincompat5005'
binexp='$binexp'
bison='$bison'
byacc='$byacc'
cryptlib='$cryptlib'
csh='$csh'
d_Gconvert='$d_Gconvert'
+d_PRIEldbl='$d_PRIEldbl'
+d_PRIFldbl='$d_PRIFldbl'
+d_PRIGldbl='$d_PRIGldbl'
+d_PRIX64='$d_PRIX64'
+d_PRId64='$d_PRId64'
+d_PRIeldbl='$d_PRIeldbl'
+d_PRIfldbl='$d_PRIfldbl'
+d_PRIgldbl='$d_PRIgldbl'
+d_PRIi64='$d_PRIi64'
+d_PRIo64='$d_PRIo64'
+d_PRIu64='$d_PRIu64'
+d_PRIx64='$d_PRIx64'
d_access='$d_access'
d_accessx='$d_accessx'
d_alarm='$d_alarm'
d_archlib='$d_archlib'
+d_atolf='$d_atolf'
+d_atoll='$d_atoll'
d_attribut='$d_attribut'
d_bcmp='$d_bcmp'
d_bcopy='$d_bcopy'
+d_bincompat5005='$d_bincompat5005'
d_bsd='$d_bsd'
d_bsdgetpgrp='$d_bsdgetpgrp'
d_bsdsetpgrp='$d_bsdsetpgrp'
d_csh='$d_csh'
d_cuserid='$d_cuserid'
d_dbl_dig='$d_dbl_dig'
-d_dbmclose64='$d_dbmclose64'
-d_dbminit64='$d_dbminit64'
-d_delete64='$d_delete64'
d_difftime='$d_difftime'
-d_dirent64_s='$d_dirent64_s'
d_dirnamlen='$d_dirnamlen'
d_dlerror='$d_dlerror'
d_dlopen='$d_dlopen'
d_fd_macros='$d_fd_macros'
d_fd_set='$d_fd_set'
d_fds_bits='$d_fds_bits'
-d_fetch64='$d_fetch64'
-d_fgetpos64='$d_fgetpos64'
d_fgetpos='$d_fgetpos'
-d_firstkey64='$d_firstkey64'
d_flexfnam='$d_flexfnam'
-d_flock64_s='$d_flock64_s'
d_flock='$d_flock'
-d_fopen64='$d_fopen64'
d_fork='$d_fork'
d_fpathconf='$d_fpathconf'
-d_freopen64='$d_freopen64'
-d_fseek64='$d_fseek64'
-d_fseeko64='$d_fseeko64'
+d_fpos64_t='$d_fpos64_t'
d_fseeko='$d_fseeko'
-d_fsetpos64='$d_fsetpos64'
d_fsetpos='$d_fsetpos'
-d_fstat64='$d_fstat64'
d_fstatfs='$d_fstatfs'
d_fstatvfs='$d_fstatvfs'
-d_ftell64='$d_ftell64'
-d_ftello64='$d_ftello64'
d_ftello='$d_ftello'
d_ftime='$d_ftime'
-d_ftruncate64='$d_ftruncate64'
d_getgrent='$d_getgrent'
d_getgrps='$d_getgrps'
d_gethbyaddr='$d_gethbyaddr'
d_htonl='$d_htonl'
d_index='$d_index'
d_inetaton='$d_inetaton'
-d_ino64_t='$d_ino64_t'
d_int64t='$d_int64t'
d_iovec_s='$d_iovec_s'
d_isascii='$d_isascii'
d_killpg='$d_killpg'
d_lchown='$d_lchown'
+d_ldbl_dig='$d_ldbl_dig'
d_link='$d_link'
d_llseek='$d_llseek'
d_locconv='$d_locconv'
-d_lockf64='$d_lockf64'
d_lockf='$d_lockf'
d_longdbl='$d_longdbl'
d_longlong='$d_longlong'
-d_lseek64='$d_lseek64'
-d_lstat64='$d_lstat64'
d_lstat='$d_lstat'
d_madvise='$d_madvise'
d_mblen='$d_mblen'
d_msync='$d_msync'
d_munmap='$d_munmap'
d_mymalloc='$d_mymalloc'
-d_nextkey64='$d_nextkey64'
d_nice='$d_nice'
d_off64_t='$d_off64_t'
-d_offset_t='$d_offset_t'
d_old_pthread_create_joinable='$d_old_pthread_create_joinable'
d_oldpthreads='$d_oldpthreads'
d_oldsock='$d_oldsock'
d_open3='$d_open3'
-d_open64='$d_open64'
-d_opendir64='$d_opendir64'
d_pathconf='$d_pathconf'
d_pause='$d_pause'
d_phostname='$d_phostname'
d_pwgecos='$d_pwgecos'
d_pwpasswd='$d_pwpasswd'
d_pwquota='$d_pwquota'
-d_readdir64='$d_readdir64'
d_readdir='$d_readdir'
d_readlink='$d_readlink'
d_readv='$d_readv'
d_sanemcmp='$d_sanemcmp'
d_sched_yield='$d_sched_yield'
d_scm_rights='$d_scm_rights'
-d_seekdir64='$d_seekdir64'
d_seekdir='$d_seekdir'
d_select='$d_select'
d_sem='$d_sem'
d_sigsetjmp='$d_sigsetjmp'
d_socket='$d_socket'
d_sockpair='$d_sockpair'
-d_stat64='$d_stat64'
d_statblks='$d_statblks'
d_statfs='$d_statfs'
d_statfsflags='$d_statfsflags'
d_stdio_stream_array='$d_stdio_stream_array'
d_stdiobase='$d_stdiobase'
d_stdstdio='$d_stdstdio'
-d_store64='$d_store64'
d_strchr='$d_strchr'
d_strcoll='$d_strcoll'
d_strctcpy='$d_strctcpy'
d_strtod='$d_strtod'
d_strtol='$d_strtol'
d_strtoul='$d_strtoul'
+d_strtoull='$d_strtoull'
d_strxfrm='$d_strxfrm'
d_suidsafe='$d_suidsafe'
d_symlink='$d_symlink'
d_system='$d_system'
d_tcgetpgrp='$d_tcgetpgrp'
d_tcsetpgrp='$d_tcsetpgrp'
-d_telldir64='$d_telldir64'
d_telldir='$d_telldir'
d_telldirproto='$d_telldirproto'
d_time='$d_time'
d_times='$d_times'
-d_tmpfile64='$d_tmpfile64'
-d_truncate64='$d_truncate64'
d_truncate='$d_truncate'
d_tzname='$d_tzname'
d_umask='$d_umask'
rm='$rm'
rmail='$rmail'
runnm='$runnm'
+sPRIEldbl='$sPRIEldbl'
+sPRIFldbl='$sPRIFldbl'
+sPRIGldbl='$sPRIGldbl'
+sPRIX64='$sPRIX64'
+sPRId64='$sPRId64'
+sPRIeldbl='$sPRIeldbl'
+sPRIfldbl='$sPRIfldbl'
+sPRIgldbl='$sPRIgldbl'
+sPRIi64='$sPRIi64'
+sPRIo64='$sPRIo64'
+sPRIu64='$sPRIu64'
+sPRIx64='$sPRIx64'
sched_yield='$sched_yield'
scriptdir='$scriptdir'
scriptdirexp='$scriptdirexp'
uniq='$uniq'
use64bits='$use64bits'
usedl='$usedl'
+uselfs='$uselfs'
+uselongdouble='$uselongdouble'
+usemorebits='$usemorebits'
usemultiplicity='$usemultiplicity'
usemymalloc='$usemymalloc'
usenm='$usenm'