# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Sat Oct 23 18:23:43 EET DST 1999 [metaconfig 3.0 PL70]
+# Generated on Tue Jan 25 16:35:03 EET 2000 [metaconfig 3.0 PL70]
# (with additional metaconfig patches by perlbug@perl.com)
cat >/tmp/c1$$ <<EOF
cf_email=''
cf_by=''
cf_time=''
+charsize=''
contains=''
cpp_stuff=''
cpplast=''
d_flexfnam=''
d_flock=''
d_fork=''
+d_fs_data_s=''
d_fseeko=''
d_fsetpos=''
+d_fstatfs=''
d_ftello=''
d_ftime=''
d_gettimeod=''
d_uname=''
d_gethostprotos=''
d_getlogin=''
+d_getmnt=''
d_getmntent=''
d_getnbyaddr=''
d_getnbyname=''
d_hasmntopt=''
d_htonl=''
d_inetaton=''
+d_int64t=''
d_isascii=''
d_killpg=''
d_lchown=''
d_longlong=''
longlongsize=''
d_lstat=''
-d_madvise=''
d_mblen=''
d_mbstowcs=''
d_mbtowc=''
d_mkdir=''
d_mkfifo=''
d_mktime=''
-d_mmap=''
-mmaptype=''
-d_mprotect=''
d_msg=''
d_msgctl=''
d_msgget=''
d_msgrcv=''
d_msgsnd=''
-d_msync=''
-d_munmap=''
d_nice=''
d_open3=''
d_fpathconf=''
d_seekdir=''
d_telldir=''
d_readlink=''
-d_readv=''
d_rename=''
d_rmdir=''
d_safebcpy=''
d_shmget=''
d_sigaction=''
d_sigsetjmp=''
-d_cmsghdr_s=''
d_msg_ctrunc=''
d_msg_dontroute=''
d_msg_oob=''
d_msg_peek=''
d_msg_proxy=''
-d_msghdr_s=''
d_oldsock=''
-d_recvmsg=''
d_scm_rights=''
-d_sendmsg=''
d_socket=''
d_sockpair=''
sockethdr=''
socketlib=''
d_sqrtl=''
d_statblks=''
-d_fstatfs=''
-d_statfs=''
-d_statfsflags=''
+d_statfs_f_flags=''
+d_statfs_s=''
d_fstatvfs=''
d_statvfs=''
d_stdio_cnt_lval=''
d_syserrlst=''
d_strtod=''
d_strtol=''
+d_strtold=''
+d_strtoll=''
d_strtoul=''
+d_strtoull=''
+d_strtouq=''
d_strxfrm=''
d_symlink=''
d_syscall=''
d_semctl_semid_ds=''
d_semctl_semun=''
d_union_semun=''
+d_ustat=''
d_vfork=''
usevfork=''
d_voidsig=''
d_waitpid=''
d_wcstombs=''
d_wctomb=''
-d_writev=''
dlext=''
cccdlflags=''
ccdlflags=''
ebcdic=''
fflushNULL=''
fflushall=''
+fpossize=''
fpostype=''
+gidformat=''
+gidsign=''
+gidsize=''
gidtype=''
groupstype=''
h_fcntl=''
i_gdbm=''
d_grpasswd=''
i_grp=''
-d_int64t=''
i_inttypes=''
i_limits=''
i_locale=''
i_sysfilio=''
i_sysioctl=''
i_syssockio=''
-i_sysmman=''
i_sysmount=''
i_sysndir=''
i_sysparam=''
i_syssecrt=''
i_sysselct=''
i_sysstat=''
+i_sysstatfs=''
i_sysstatvfs=''
i_systimes=''
i_systypes=''
-d_iovec_s=''
i_sysuio=''
i_sysun=''
+i_sysvfs=''
i_syswait=''
i_sgtty=''
i_termio=''
i_time=''
timeincl=''
i_unistd=''
+i_ustat=''
i_utime=''
i_values=''
i_stdarg=''
i_varargs=''
i_varhdr=''
i_vfork=''
+inc_version_list=''
+inc_version_list_init=''
installprefix=''
installprefixexp=''
installstyle=''
longsize=''
shortsize=''
d_fpos64_t=''
-d_llseek=''
d_off64_t=''
libc=''
ldlibpthname=''
package=''
spackage=''
pager=''
-apiversion=''
+api_revision=''
+api_subversion=''
+api_version=''
+api_versionstring=''
patchlevel=''
subversion=''
version=''
perladmin=''
perlpath=''
+d_nvpresuv=''
+i16size=''
+i16type=''
+i32size=''
+i32type=''
+i64size=''
+i64type=''
+i8size=''
+i8type=''
+ivsize=''
+ivtype=''
+nvsize=''
+nvtype=''
+u16size=''
+u16type=''
+u32size=''
+u32type=''
+u64size=''
+u64type=''
+u8size=''
+u8type=''
+uvsize=''
+uvtype=''
+ivdformat=''
+uvoformat=''
+uvuformat=''
+uvxformat=''
pidtype=''
prefix=''
prefixexp=''
sPRIo64=''
sPRIu64=''
sPRIx64=''
+d_quad=''
+quadkind=''
+quadtype=''
+uquadtype=''
drand01=''
randbits=''
randfunc=''
stdchar=''
d_stdio_stream_array=''
stdio_stream_array=''
-d_strtoull=''
sysman=''
trnl=''
+uidformat=''
uidsign=''
+uidsize=''
uidtype=''
archname64=''
use64bits=''
uselargefiles=''
uselongdouble=''
+uselonglong=''
usemorebits=''
usemultiplicity=''
nm_opt=''
useperlio=''
usesocks=''
d_oldpthreads=''
+use5005threads=''
+useithreads=''
usethreads=''
incpath=''
-mips=''
mips_type=''
usrinc=''
d_vendorbin=''
vendorprefixexp=''
defvoidused=''
voidflags=''
-pm_apiversion=''
-xs_apiversion=''
CONFIG=''
define='define'
fi
i_whoami=''
-: Possible local include directories to search.
-: Set locincpth to "" in a hint file to defeat local include searches.
-locincpth="/usr/local/include /opt/local/include /usr/gnu/include"
-locincpth="$locincpth /opt/gnu/include /usr/GNU/include /opt/GNU/include"
-:
-: no include file wanted by default
-inclwanted=''
-
: list of known cpp symbols, sorted alphabetically
al="AMIX BIT_MSF BSD BSD4_3 BSD_NET2 CMU CRAY DGUX DOLPHIN DPX2"
al="$al GO32 GOULD_PN HP700 I386 I80960 I960 Lynx M68000 M68K MACH"
al="$al u3b20d u3b5 ultrix unix unixpc unos vax venix vms"
al="$al xenix z8000"
+: set useposix=false in your hint file to disable the POSIX extension.
+useposix=true
+: set useopcode=false in your hint file to disable the Opcode extension.
+useopcode=true
: Trailing extension. Override this in a hint file, if needed.
_exe=''
: Extra object files, if any, needed on this platform.
archobjs=''
+: Possible local include directories to search.
+: Set locincpth to "" in a hint file to defeat local include searches.
+locincpth="/usr/local/include /opt/local/include /usr/gnu/include"
+locincpth="$locincpth /opt/gnu/include /usr/GNU/include /opt/GNU/include"
+:
+: no include file wanted by default
+inclwanted=''
+
groupstype=''
: change the next line if compiling for Xenix/286 on Xenix/386
xlibpth='/usr/lib/386 /lib/386'
libswanted=''
: some systems want to use only the non-versioned libso:s
ignore_versioned_solibs=''
-: full support for void wanted by default
-defvoidused=15
-
-: set useposix=false in your hint file to disable the POSIX extension.
-useposix=true
-: set useopcode=false in your hint file to disable the Opcode extension.
-useopcode=true
: set usemultiplicity on the Configure command line to enable multiplicity.
: set usesocks on the Configure command line to enable socks.
: set usethreads on the Configure command line to enable threads.
+: full support for void wanted by default
+defvoidused=15
+
: List of libraries we want.
: If anyone needs -lnet, put it in a hint file.
libswanted='sfio socket inet nsl nm ndbm gdbm dbm db malloc dl'
more
nm
nroff
+perl
pg
test
uname
$test -f /dnix && osname=dnix
$test -f /lynx.os && osname=lynxos
$test -f /unicos && osname=unicos && osvers=`$uname -r`
+ $test -f /unicosmk && osname=unicosmk && osvers=`$uname -r`
$test -f /unicosmk.ar && osname=unicosmk && osvers=`$uname -r`
$test -f /bin/mips && /bin/mips && osname=mips
$test -d /NextApps && set X `hostinfo | grep 'NeXT Mach.*:' | \
osvers="$2.$3"
fi
fi
- $test -f /sys/posix.dll &&
- $test -f /usr/bin/what &&
- set X `/usr/bin/what /sys/posix.dll` &&
- $test "$3" = UWIN &&
- osname=uwin &&
- osvers="$5"
+
+ $test -f /sys/posix.dll &&
+ $test -f /usr/bin/what &&
+ set X `/usr/bin/what /sys/posix.dll` &&
+ $test "$3" = UWIN &&
+ osname=uwin &&
+ osvers="$5"
+
if $test -f $uname; then
set X $myuname
shift
*) osvers=$tmp;;
esac
;;
+ bsd386) osname=bsd386
+ osvers=`$uname -r`
+ ;;
+ cygwin*) osname=cygwin
+ osvers="$3"
+ ;;
*dc.osx) osname=dcosx
osvers="$3"
;;
*) osname=newsos ;;
esac
;;
- bsd386) osname=bsd386
- osvers=`$uname -r`
+ next*) osname=next ;;
+ POSIX-BC | posix-bc ) osname=posix-bc
+ osvers="$3"
;;
- POSIX-BC | posix-bc ) osname=posix-bc
- osvers="$3"
- ;;
powerux | power_ux | powermax_os | powermaxos | \
powerunix | power_unix) osname=powerux
osvers="$3"
;;
- next*) osname=next ;;
+ qnx) osname=qnx
+ osvers="$4"
+ ;;
solaris) osname=solaris
case "$3" in
5*) osvers=`echo $3 | $sed 's/^5/2/g'` ;;
uts) osname=uts
osvers="$3"
;;
- qnx) osname=qnx
- osvers="$4"
- ;;
$2) case "$osname" in
*isc*) ;;
*freebsd*) ;;
rp='Build a threading Perl?'
. ./myread
case "$ans" in
-y|Y) val="$define" ;;
+y|Y) val="$define" ;;
*) val="$undef" ;;
esac
set usethreads
-eval $setvar
+eval $setvar
+
+case "$usethreads" in
+$define)
+ $cat <<EOM
+
+As of 5.5.640, Perl has two different internal threading implementations,
+the 5.005 version (5005threads) and an interpreter-based version
+(ithreads) that has one interpreter per thread. Both are very
+experimental. This arrangement exists to help developers work out
+which one is better.
+EOM
+ : Default to ithreads unless overridden on command line or with
+ : old config.sh
+ dflt='y'
+ case "$use5005threads" in
+ $define|true|[yY]*) dflt='n';;
+ esac
+ case "$useithreads" in
+ $undef|false|[nN]*) dflt='n';;
+ esac
+ rp='Use interpreter-based ithreads?'
+ . ./myread
+ case "$ans" in
+ y|Y) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ set useithreads
+ eval $setvar
+ : Now set use5005threads to the opposite value.
+ case "$useithreads" in
+ $define) val="$undef" ;;
+ *) val="$define" ;;
+ esac
+ set use5005threads
+ eval $setvar
+ ;;
+*)
+ useithreads="$undef"
+ use5005threads="$undef"
+ ;;
+esac
case "$d_oldpthreads" in
'') : Configure tests would be welcome here. For now, assume undef.
Assuming POSIX threads, then.)
EOM
fi
- ;;
+ ;;
esac
cat <<EOM
Perl can be built so that multiple Perl interpreters can coexist
-within the same Perl executable. To do so, Configure must be run with
--Dusemultiplicity.
-
-Normally you do not need this and you should answer no.
+within the same Perl executable.
+EOM
+case "$useithreads" in
+$define)
+ cat <<EOM
+This multiple interpreter support is required for interpreter-based threads.
EOM
-case "$usemultiplicity" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-rp='Build Perl for multiplicity?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
+ val="$define"
+ ;;
+*)
+ echo 'Normally you do not need this and you should answer no.'
+ case "$usemultiplicity" in
+ $define|true|[yY]*) dflt='y';;
+ *) dflt='n';;
+ esac
+ rp='Build Perl for multiplicity?'
+ . ./myread
+ case "$ans" in
+ y|Y) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ ;;
esac
set usemultiplicity
-eval $setvar
+eval $setvar
: determine where manual pages are on this system
echo " "
gccversion=`./gccvers`
case "$gccversion" in
'') echo "You are not using GNU cc." ;;
- *) echo "You are using GNU cc $gccversion." ;;
+ *) echo "You are using GNU cc $gccversion."
+ ;;
esac
else
echo " "
1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
esac
-
-case "$usemorebits" in
-"$define"|true|[yY]*)
- use64bits="$define"
- uselongdouble="$define"
- usemorebits="$define"
- ;;
-*) usemorebits="$undef"
- ;;
-esac
-
-
-cat <<EOM
-
-Perl can be built to understand large files (files larger than 2 gigabytes)
-on some systems. To do so, Configure must be run with -Duselargefiles.
-
-If this doesn't make any sense to you, just accept the default.
-EOM
-case "$uselargefiles" in
-"$define"|true|[yY]*) dflt='y' ;;
-*) dflt='n' ;;
-esac
-rp='Try to understand large files?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
-esac
-set uselargefiles
-eval $setvar
-case "$uselargefiles" in
-"$define") use64bits="$define" ;;
-esac
-
-cat <<EOM
-
-Perl can be built to take advantage of explicit 64-bit interfaces,
-on some systems. To do so, Configure must be run with -Duse64bits.
-
-If this doesn't make any sense to you, just accept the default.
-EOM
-case "$use64bits" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-rp='Try to use explicit 64-bit interfaces, if available?'
-. ./myread
-case "$ans" in
-y|Y)
- val="$define"
- ;;
-*)
- val="$undef"
- ;;
-esac
-set use64bits
-eval $setvar
-
-case "$archname64" in
-'') archname64='' ;; # not a typo
-esac
-
-case "$use64bits" in
-"$define"|true|[yY]*)
-: Look for a hint-file generated 'call-back-unit'. If the
-: user has specified that a 64 bit perl is to be built,
-: we may need to set or change some other defaults.
- if $test -f use64bits.cbu; then
- echo "Your platform has some specific hints for 64-bit builds, using them..."
- . ./use64bits.cbu
- else
- $cat <<EOM
-(Your platform doesn't have any specific hints for 64-bit builds.
- This is probably okay, especially if your system is a true 64-bit system.)
-EOM
- case "$gccversion" in
- '') ;;
- *) $cat <<EOM
-But since you seem to be using gcc,
-I will now add -DUSE_LONG_LONG to the compilation flags.
-EOM
- ccflags="$ccflags -DUSE_LONG_LONG"
- ;;
- esac
- fi
- ;;
-esac
-
-: determine the architecture name
-echo " "
-if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
- tarch=`arch`"-$osname"
-elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
- if uname -m > tmparch 2>&1 ; then
- tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
- -e 's/$/'"-$osname/" tmparch`
- else
- tarch="$osname"
- fi
- $rm -f tmparch
-else
- tarch="$osname"
-fi
-case "$myarchname" in
-''|"$tarch") ;;
-*)
- echo "(Your architecture name used to be $myarchname.)"
- archname=''
- ;;
-esac
-myarchname="$tarch"
-case "$archname" in
-'') dflt="$tarch";;
-*) dflt="$archname";;
-esac
-rp='What is your architecture name'
-. ./myread
-archname="$ans"
-case "$usethreads" in
-$define)
- echo "Threads selected." >&4
- case "$archname" in
- *-thread*) echo "...and architecture name already has -thread." >&4
- ;;
- *) archname="$archname-thread"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
-esac
-case "$usemultiplicity" in
-$define)
- echo "Multiplicity selected." >&4
- case "$archname" in
- *-multi*) echo "...and architecture name already has -multi." >&4
- ;;
- *) archname="$archname-multi"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
-esac
-case "$use64bits" in
-$define)
- echo "Explicit 64-bitness selected." >&4
- case "$archname64" in
- '')
- ;;
- *)
- case "$archname" in
- *-$archname64*) echo "...and architecture name already has $archname64." >&4
- ;;
- *) archname="$archname-$archname64"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
- esac
-esac
-
: decide how portable to be. Allow command line overrides.
case "$d_portable" in
"$undef") ;;
test "X$gfpthkeep" != Xy && gfpth=""
EOSC
-: determine root of directory hierarchy where package will be installed.
-case "$prefix" in
-'')
- dflt=`./loc . /usr/local /usr/local /local /opt /usr`
- ;;
-*)
- dflt="$prefix"
- ;;
-esac
-$cat <<EOM
-
-By default, $package will be installed in $dflt/bin, manual pages
-under $dflt/man, etc..., i.e. with $dflt as prefix for all
-installation directories. Typically this is something like /usr/local.
-If you wish to have binaries under /usr/bin but other parts of the
-installation under /usr/local, that's ok: you will be prompted
-separately for each of the installation directories, the prefix being
-only used to set the defaults.
-
-EOM
-fn=d~
-rp='Installation prefix to use?'
-. ./getfile
-oldprefix=''
-case "$prefix" in
+: What should the include directory be ?
+echo " "
+$echo $n "Hmm... $c"
+dflt='/usr/include'
+incpath=''
+mips_type=''
+if $test -f /bin/mips && /bin/mips; then
+ echo "Looks like a MIPS system..."
+ $cat >usr.c <<'EOCP'
+#ifdef SYSTYPE_BSD43
+/bsd43
+#endif
+EOCP
+ if $cc -E usr.c > usr.out && $contains / usr.out >/dev/null 2>&1; then
+ dflt='/bsd43/usr/include'
+ incpath='/bsd43'
+ mips_type='BSD 4.3'
+ else
+ mips_type='System V'
+ fi
+ $rm -f usr.c usr.out
+ echo "and you're compiling with the $mips_type compiler and libraries."
+ xxx_prompt=y
+ echo "exit 0" >mips
+else
+ echo "Doesn't look like a MIPS system."
+ xxx_prompt=n
+ echo "exit 1" >mips
+fi
+chmod +x mips
+$eunicefix mips
+case "$usrinc" in
'') ;;
-*)
- case "$ans" in
- "$prefix") ;;
- *) oldprefix="$prefix";;
- esac
+*) dflt="$usrinc";;
+esac
+case "$xxx_prompt" in
+y) fn=d/
+ echo " "
+ rp='Where are the include files you want to use?'
+ . ./getfile
+ usrinc="$ans"
+ ;;
+*) usrinc="$dflt"
;;
esac
-prefix="$ans"
-prefixexp="$ansexp"
-: is AFS running?
+: see how we invoke the C preprocessor
echo " "
-case "$afs" in
-$define|true) afs=true ;;
-$undef|false) afs=false ;;
-*) if test -d /afs; then
- afs=true
+echo "Now, how can we feed standard input to your C preprocessor..." >&4
+cat <<'EOT' >testcpp.c
+#define ABC abc
+#define XYZ xyz
+ABC.XYZ
+EOT
+cd ..
+if test ! -f cppstdin; then
+ if test "X$osname" = "Xaix" -a "X$gccversion" = X; then
+ # AIX cc -E doesn't show the absolute headerfile
+ # locations but we'll cheat by using the -M flag.
+ echo 'cat >.$$.c; rm -f .$$.u; '"$cc"' ${1+"$@"} -M -c .$$.c 2>/dev/null; test -s .$$.u && awk '"'"'$2 ~ /\.h$/ { print "# 0 \""$2"\"" }'"'"' .$$.u; rm -f .$$.o .$$.u; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' > cppstdin
else
- afs=false
+ echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
fi
- ;;
-esac
-if $afs; then
- echo "AFS may be running... I'll be extra cautious then..." >&4
else
- echo "AFS does not seem to be running..." >&4
+ echo "Keeping your $hint cppstdin wrapper."
fi
+chmod 755 cppstdin
+wrapper=`pwd`/cppstdin
+ok='false'
+cd UU
-: determine installation prefix for where package is to be installed.
-if $afs; then
-$cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-files will reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-
-EOM
- case "$installprefix" in
- '') dflt=`echo $prefix | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installprefix";;
+if $test "X$cppstdin" != "X" && \
+ $cppstdin $cppminus <testcpp.c >testcpp.out 2>&1 && \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+then
+ echo "You used to use $cppstdin $cppminus so we'll use that again."
+ case "$cpprun" in
+ '') echo "But let's see if we can live without a wrapper..." ;;
+ *)
+ if $cpprun $cpplast <testcpp.c >testcpp.out 2>&1 && \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+ then
+ echo "(And we'll use $cpprun $cpplast to preprocess directly.)"
+ ok='true'
+ else
+ echo "(However, $cpprun $cpplast does not work, let's see...)"
+ fi
+ ;;
esac
else
-$cat <<EOM
-
-In some special cases, particularly when building $package for distribution,
-it is convenient to distinguish between the directory in which files should
-be installed from the directory ($prefix) in which they
-will eventually reside. For most users, these two directories are the same.
-
-EOM
- case "$installprefix" in
- '') dflt=$prefix ;;
- *) dflt=$installprefix;;
- esac
-fi
-fn=d~
-rp='What installation prefix should I use for installing files?'
-. ./getfile
-installprefix="$ans"
-installprefixexp="$ansexp"
-
-: set the prefixit variable, to compute a suitable default value
-prefixit='case "$3" in
-""|none)
- case "$oldprefix" in
- "") eval "$1=\"\$$2\"";;
+ case "$cppstdin" in
+ '') ;;
*)
- case "$3" in
- "") eval "$1=";;
- none)
- eval "tp=\"\$$2\"";
- case "$tp" in
- ""|" ") eval "$1=\"\$$2\"";;
- *) eval "$1=";;
- esac;;
- esac;;
- esac;;
-*)
- eval "tp=\"$oldprefix-\$$2-\""; eval "tp=\"$tp\"";
- case "$tp" in
- --|/*--|\~*--) eval "$1=\"$prefix/$3\"";;
- /*-$oldprefix/*|\~*-$oldprefix/*)
- eval "$1=\`echo \$$2 | sed \"s,^$oldprefix,$prefix,\"\`";;
- *) eval "$1=\"\$$2\"";;
- esac;;
-esac'
-
-: set the base revision
-baserev=5.0
-
-: get the patchlevel
-echo " "
-echo "Getting the current patchlevel..." >&4
-if $test -r $rsrc/patchlevel.h;then
- patchlevel=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
- subversion=`awk '/define[ ]+PERL_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
- apiversion=`awk '/define[ ]+PERL_APIVERSION/ {print $3}' $rsrc/patchlevel.h`
-else
- patchlevel=0
- subversion=0
- apiversion=0
+ echo "Good old $cppstdin $cppminus does not seem to be of any help..."
+ ;;
+ esac
fi
-$echo $n "(You have $package" $c
-case "$package" in
-"*$baserev") ;;
-*) $echo $n " $baserev" $c ;;
-esac
-$echo $n " patchlevel $patchlevel" $c
-test 0 -eq "$subversion" || $echo $n " subversion $subversion" $c
-echo ".)"
-if test 0 -eq "$subversion"; then
- version=`LC_ALL=C; export LC_ALL; \
- echo $baserev $patchlevel | \
- $awk '{ printf "%.3f\n", $1 + $2/1000.0 }'`
+if $ok; then
+ : nothing
+elif echo 'Maybe "'"$cc"' -E" will work...'; \
+ $cc -E <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yup, it does."
+ x_cpp="$cc -E"
+ x_minus='';
+elif echo 'Nope...maybe "'"$cc"' -E -" will work...'; \
+ $cc -E - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yup, it does."
+ x_cpp="$cc -E"
+ x_minus='-';
+elif echo 'Nope...maybe "'"$cc"' -P" will work...'; \
+ $cc -P <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yipee, that works!"
+ x_cpp="$cc -P"
+ x_minus='';
+elif echo 'Nope...maybe "'"$cc"' -P -" will work...'; \
+ $cc -P - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "At long last!"
+ x_cpp="$cc -P"
+ x_minus='-';
+elif echo 'No such luck, maybe "'$cpp'" will work...'; \
+ $cpp <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "It works!"
+ x_cpp="$cpp"
+ x_minus='';
+elif echo 'Nixed again...maybe "'$cpp' -" will work...'; \
+ $cpp - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Hooray, it works! I was beginning to wonder."
+ x_cpp="$cpp"
+ x_minus='-';
+elif echo 'Uh-uh. Time to get fancy. Trying a wrapper...'; \
+ $wrapper <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ x_cpp="$wrapper"
+ x_minus=''
+ echo "Eureka!"
else
- version=`LC_ALL=C; export LC_ALL; \
- echo $baserev $patchlevel $subversion | \
- $awk '{ printf "%.5f\n", $1 + $2/1000.0 + $3/100000.0 }'`
+ dflt=''
+ rp="No dice. I can't find a C preprocessor. Name one:"
+ . ./myread
+ x_cpp="$ans"
+ x_minus=''
+ $x_cpp <testcpp.c >testcpp.out 2>&1
+ if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "OK, that will do." >&4
+ else
+echo "Sorry, I can't get that to work. Go find one and rerun Configure." >&4
+ exit 1
+ fi
fi
-: determine installation style
-: For now, try to deduce it from prefix unless it is already set.
-: Reproduce behavior of 5.005 and earlier, maybe drop that in 5.7.
-case "$installstyle" in
-'') case "$prefix" in
- *perl*) dflt='lib';;
- *) dflt='lib/perl5' ;;
+case "$ok" in
+false)
+ cppstdin="$x_cpp"
+ cppminus="$x_minus"
+ cpprun="$x_cpp"
+ cpplast="$x_minus"
+ set X $x_cpp
+ shift
+ case "$1" in
+ "$cpp")
+ echo "Perhaps can we force $cc -E using a wrapper..."
+ if $wrapper <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+ then
+ echo "Yup, we can."
+ cppstdin="$wrapper"
+ cppminus='';
+ else
+ echo "Nope, we'll have to live without it..."
+ fi
+ ;;
+ esac
+ case "$cpprun" in
+ "$wrapper")
+ cpprun=''
+ cpplast=''
+ ;;
esac
;;
-*) dflt='lib/perl5' ;;
esac
-: Probably not worth prompting for this since we prompt for all
-: the directories individually, and the prompt would be too long and
-: confusing anyway.
-installstyle=$dflt
-: determine where private library files go
-: Usual default is /usr/local/lib/perl5/$version.
-: Also allow things like /opt/perl/lib/$version, since
-: /opt/perl/lib/perl5... would be redundant.
-: The default "style" setting is made in installstyle.U
-case "$installstyle" in
-*lib/perl5*) set dflt privlib lib/$package/$version ;;
-*) set dflt privlib lib/$version ;;
+case "$cppstdin" in
+"$wrapper"|'cppstdin') ;;
+*) $rm -f $wrapper;;
esac
-eval $prefixit
-$cat <<EOM
+$rm -f testcpp.c testcpp.out
-There are some auxiliary files for $package that need to be put into a
-private library directory that is accessible by everyone.
+: Set private lib path
+case "$plibpth" in
+'') if ./mips; then
+ plibpth="$incpath/usr/lib /usr/local/lib /usr/ccs/lib"
+ fi;;
+esac
+case "$libpth" in
+' ') dlist='';;
+'') dlist="$loclibpth $plibpth $glibpth";;
+*) dlist="$libpth";;
+esac
-EOM
-fn=d~+
-rp='Pathname where the private library files will reside?'
-. ./getfile
-privlib="$ans"
-privlibexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installprivlib=`echo $privlibexp | sed "s#^$prefix#$installprefix#"`
-else
- installprivlib="$privlibexp"
-fi
+: Now check and see which directories actually exist, avoiding duplicates
+libpth=''
+for xxx in $dlist
+do
+ if $test -d $xxx; then
+ case " $libpth " in
+ *" $xxx "*) ;;
+ *) libpth="$libpth $xxx";;
+ esac
+ fi
+done
+$cat <<'EOM'
-: set the prefixup variable, to restore leading tilda escape
-prefixup='case "$prefixexp" in
-"$prefix") ;;
-*) eval "$1=\`echo \$$1 | sed \"s,^$prefixexp,$prefix,\"\`";;
-esac'
+Some systems have incompatible or broken versions of libraries. Among
+the directories listed in the question below, please remove any you
+know not to be holding relevant libraries, and add any that are needed.
+Say "none" for none.
-: determine where public architecture dependent libraries go
-set archlib archlib
-eval $prefixit
-: privlib default is /usr/local/lib/$package/$version
-: archlib default is /usr/local/lib/$package/$version/$archname
-: privlib may have an optional trailing /share.
-tdflt=`echo $privlib | $sed 's,/share$,,'`
-tdflt=$tdflt/$archname
-case "$archlib" in
-'') dflt=$tdflt
+EOM
+case "$libpth" in
+'') dflt='none';;
+*)
+ set X $libpth
+ shift
+ dflt=${1+"$@"}
;;
-*) dflt="$archlib"
- ;;
+esac
+rp="Directories to use for library searches?"
+. ./myread
+case "$ans" in
+none) libpth=' ';;
+*) libpth="$ans";;
+esac
+
+: compute shared library extension
+case "$so" in
+'')
+ if xxx=`./loc libc.sl X $libpth`; $test -f "$xxx"; then
+ dflt='sl'
+ else
+ dflt='so'
+ fi
+ ;;
+*) dflt="$so";;
esac
$cat <<EOM
-$spackage contains architecture-dependent library files. If you are
-sharing libraries in a heterogeneous environment, you might store
-these files in a separate location. Otherwise, you can just include
-them with the rest of the public library files.
+On some systems, shared libraries may be available. Answer 'none' if
+you want to suppress searching of shared libraries for the remainder
+of this configuration.
EOM
-fn=d+~
-rp='Where do you want to put the public architecture-dependent libraries?'
-. ./getfile
-archlib="$ans"
-archlibexp="$ansexp"
-if $test X"$archlib" = X"$privlib"; then
- d_archlib="$undef"
-else
- d_archlib="$define"
-fi
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installarchlib=`echo $archlibexp | sed "s#^$prefix#$installprefix#"`
-else
- installarchlib="$archlibexp"
-fi
-
+rp='What is the file extension used for shared libraries?'
+. ./myread
+so="$ans"
-: Binary compatibility with 5.005 is not possible for builds
-: with advanced features
-case "$usethreads$usemultiplicity" in
-*define*)
- bincompat5005="$undef"
- d_bincompat5005="$undef"
+: Define several unixisms.
+: Hints files or command line option can be used to override them.
+: The convoluted testing is in case hints files set either the old
+: or the new name.
+case "$_exe" in
+'') case "$exe_ext" in
+ '') ;;
+ *) _exe="$exe_ext" ;;
+ esac
;;
-*) $cat <<EOM
-
-Perl 5.006 can be compiled for binary compatibility with 5.005.
-If you decide to do so, you will be able to continue using most
-of the extensions that were compiled for Perl 5.005.
-
-EOM
- case "$bincompat5005$d_bincompat5005" in
- *"$undef"*) dflt=n ;;
- *) dflt=y ;;
+esac
+case "$_a" in
+'') case "$lib_ext" in
+ '') _a='.a';;
+ *) _a="$lib_ext" ;;
esac
- rp='Binary compatibility with Perl 5.005?'
- . ./myread
- case "$ans" in
- y*) val="$define" ;;
- *) val="$undef" ;;
+ ;;
+esac
+case "$_o" in
+'') case "$obj_ext" in
+ '') _o='.o';;
+ *) _o="$obj_ext";;
esac
- set d_bincompat5005
- eval $setvar
- case "$d_bincompat5005" in
- "$define")
- bincompat5005="$define"
- ;;
- *) bincompat5005="$undef"
- d_bincompat5005="$undef"
- ;;
+ ;;
+esac
+case "$p_" in
+'') case "$path_sep" in
+ '') p_=':';;
+ *) p_="$path_sep";;
esac
;;
esac
+exe_ext=$_exe
+lib_ext=$_a
+obj_ext=$_o
+path_sep=$p_
+: Which makefile gets called first. This is used by make depend.
+case "$firstmakefile" in
+'') firstmakefile='makefile';;
+esac
-: see if setuid scripts can be secure
-$cat <<EOM
+cat <<EOM
-Some kernels have a bug that prevents setuid #! scripts from being
-secure. Some sites have disabled setuid #! scripts because of this.
+Perl can be built to use the SOCKS proxy protocol library. To do so,
+Configure must be run with -Dusesocks.
-First let's decide if your kernel supports secure setuid #! scripts.
-(If setuid #! scripts would be secure but have been disabled anyway,
-don't say that they are secure if asked.)
+Normally you do not need this and you should answer no.
EOM
+case "$usesocks" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+rp='Build Perl for SOCKS?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set usesocks
+eval $setvar
-val="$undef"
-if $test -d /dev/fd; then
- echo "#!$ls" >reflect
- chmod +x,u+s reflect
- ./reflect >flect 2>&1
- if $contains "/dev/fd" flect >/dev/null; then
- echo "Congratulations, your kernel has secure setuid scripts!" >&4
- val="$define"
- else
- $cat <<EOM
-If you are not sure if they are secure, I can check but I'll need a
-username and password different from the one you are using right now.
-If you don't have such a username or don't want me to test, simply
-enter 'none'.
-
-EOM
- rp='Other username to test security of setuid scripts with?'
- dflt='none'
- . ./myread
- case "$ans" in
- n|none)
- case "$d_suidsafe" in
- '') echo "I'll assume setuid scripts are *not* secure." >&4
- dflt=n;;
- "$undef")
- echo "Well, the $hint value is *not* secure." >&4
- dflt=n;;
- *) echo "Well, the $hint value *is* secure." >&4
- dflt=y;;
- esac
- ;;
- *)
- $rm -f reflect flect
- echo "#!$ls" >reflect
- chmod +x,u+s reflect
- echo >flect
- chmod a+w flect
- echo '"su" will (probably) prompt you for '"$ans's password."
- su $ans -c './reflect >flect'
- if $contains "/dev/fd" flect >/dev/null; then
- echo "Okay, it looks like setuid scripts are secure." >&4
- dflt=y
- else
- echo "I don't think setuid scripts are secure." >&4
- dflt=n
- fi
- ;;
+: Looking for optional libraries
+echo " "
+echo "Checking for optional libraries..." >&4
+case "$libs" in
+' '|'') dflt='';;
+*) dflt="$libs";;
+esac
+case "$libswanted" in
+'') libswanted='c_s';;
+esac
+case "$usesocks" in
+$define)
+ libswanted="$libswanted socks5 socks5_sh"
+ ;;
+esac
+for thislib in $libswanted; do
+
+ if xxx=`./loc lib$thislib.$so.[0-9]'*' X $libpth`;
+ $test -f "$xxx" -a "X$ignore_versioned_solibs" = "X"; then
+ echo "Found -l$thislib (shared)."
+ case " $dflt " in
+ *"-l$thislib "*);;
+ *) dflt="$dflt -l$thislib";;
esac
- rp='Does your kernel have *secure* setuid scripts?'
- . ./myread
- case "$ans" in
- [yY]*) val="$define";;
- *) val="$undef";;
+ elif xxx=`./loc lib$thislib.$so X $libpth` ; $test -f "$xxx"; then
+ echo "Found -l$thislib (shared)."
+ case " $dflt " in
+ *"-l$thislib "*);;
+ *) dflt="$dflt -l$thislib";;
+ esac
+ elif xxx=`./loc lib$thislib$_a X $libpth`; $test -f "$xxx"; then
+ echo "Found -l$thislib."
+ case " $dflt " in
+ *"-l$thislib "*);;
+ *) dflt="$dflt -l$thislib";;
+ esac
+ elif xxx=`./loc $thislib$_a X $libpth`; $test -f "$xxx"; then
+ echo "Found -l$thislib."
+ case " $dflt " in
+ *"-l$thislib "*);;
+ *) dflt="$dflt -l$thislib";;
esac
+ elif xxx=`./loc lib${thislib}_s$_a X $libpth`; $test -f "$xxx"; then
+ echo "Found -l${thislib}_s."
+ case " $dflt " in
+ *"-l$thislib "*);;
+ *) dflt="$dflt -l${thislib}_s";;
+ esac
+ elif xxx=`./loc Slib$thislib$_a X $xlibpth`; $test -f "$xxx"; then
+ echo "Found -l$thislib."
+ case " $dflt " in
+ *"-l$thislib "*);;
+ *) dflt="$dflt -l$thislib";;
+ esac
+ else
+ echo "No -l$thislib."
fi
-else
- echo "I don't think setuid scripts are secure (no /dev/fd directory)." >&4
- echo "(That's for file descriptors, not floppy disks.)"
- val="$undef"
-fi
-set d_suidsafe
-eval $setvar
+done
+set X $dflt
+shift
+dflt="$*"
+case "$libs" in
+'') dflt="$dflt";;
+*) dflt="$libs";;
+esac
+case "$dflt" in
+' '|'') dflt='none';;
+esac
-$rm -f reflect flect
+$cat <<EOM
+
+In order to compile $package on your machine, a number of libraries
+are usually needed. Include any other special libraries here as well.
+Say "none" for none. The default list is almost always right.
+EOM
-: now see if they want to do setuid emulation
echo " "
-val="$undef"
-case "$d_suidsafe" in
-"$define")
- val="$undef"
- echo "No need to emulate SUID scripts since they are secure here." >& 4
- ;;
-*)
- $cat <<EOM
-Some systems have disabled setuid scripts, especially systems where
-setuid scripts cannot be secure. On systems where setuid scripts have
-been disabled, the setuid/setgid bits on scripts are currently
-useless. It is possible for $package to detect those bits and emulate
-setuid/setgid in a secure fashion. This emulation will only work if
-setuid scripts have been disabled in your kernel.
+rp="What libraries to use?"
+. ./myread
+case "$ans" in
+none) libs=' ';;
+*) libs="$ans";;
+esac
-EOM
- case "$d_dosuid" in
- "$define") dflt=y ;;
- *) dflt=n ;;
+: determine optimization, if desired, or use for debug flag also
+case "$optimize" in
+' '|$undef) dflt='none';;
+'') dflt='-O';;
+*) dflt="$optimize";;
+esac
+$cat <<EOH
+
+By default, $package compiles with the -O flag to use the optimizer.
+Alternately, you might want to use the symbolic debugger, which uses
+the -g flag (on traditional Unix systems). Either flag can be
+specified here. To use neither flag, specify the word "none".
+
+EOH
+rp="What optimizer/debugger flag should be used?"
+. ./myread
+optimize="$ans"
+case "$optimize" in
+'none') optimize=" ";;
+esac
+
+dflt=''
+: We will not override a previous value, but we might want to
+: augment a hint file
+case "$hint" in
+default|recommended)
+ case "$gccversion" in
+ 1*) dflt='-fpcc-struct-return' ;;
esac
- rp="Do you want to do setuid/setgid emulation?"
- . ./myread
- case "$ans" in
- [yY]*) val="$define";;
- *) val="$undef";;
+ case "$optimize" in
+ *-g*) dflt="$dflt -DDEBUGGING";;
+ esac
+ case "$gccversion" in
+ 2*) if test -d /etc/conf/kconfig.d &&
+ $contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
+ then
+ dflt="$dflt -posix"
+ fi
+ ;;
+ esac
+ case "$gccversion" in
+ 1*) ;;
+ 2.[0-8]*) ;;
+ ?*) echo " "
+ echo "Checking if your compiler accepts -fno-strict-aliasing" 2>&1
+ echo 'int main(void) { return 0; }' > gcctest.c
+ if $cc -O2 -fno-strict-aliasing -o gcctest gcctest.c; then
+ echo "Yes, it does." 2>&1
+ case "$ccflags" in
+ *strict-aliasing*)
+ echo "Leaving current flags $ccflags alone." 2>&1
+ ;;
+ *) dflt="$dflt -fno-strict-aliasing" ;;
+ esac
+ else
+ echo "Nope, it doesn't, but that's ok." 2>&1
+ fi
+ ;;
esac
;;
esac
-set d_dosuid
-eval $setvar
-: What should the include directory be ?
-echo " "
-$echo $n "Hmm... $c"
-dflt='/usr/include'
-incpath=''
-mips_type=''
-if $test -f /bin/mips && /bin/mips; then
- echo "Looks like a MIPS system..."
- $cat >usr.c <<'EOCP'
-#ifdef SYSTYPE_BSD43
-/bsd43
-#endif
-EOCP
- if $cc -E usr.c > usr.out && $contains / usr.out >/dev/null 2>&1; then
- dflt='/bsd43/usr/include'
- incpath='/bsd43'
- mips_type='BSD 4.3'
- else
- mips_type='System V'
+case "$mips_type" in
+*BSD*|'') inclwanted="$locincpth $usrinc";;
+*) inclwanted="$locincpth $inclwanted $usrinc/bsd";;
+esac
+for thisincl in $inclwanted; do
+ if $test -d $thisincl; then
+ if $test x$thisincl != x$usrinc; then
+ case "$dflt" in
+ *$thisincl*);;
+ *) dflt="$dflt -I$thisincl";;
+ esac
+ fi
fi
- $rm -f usr.c usr.out
- echo "and you're compiling with the $mips_type compiler and libraries."
- xxx_prompt=y
- echo "exit 0" >mips
+done
+
+inctest='if $contains $2 $usrinc/$1 >/dev/null 2>&1; then
+ xxx=true;
+elif $contains $2 $usrinc/sys/$1 >/dev/null 2>&1; then
+ xxx=true;
else
- echo "Doesn't look like a MIPS system."
- xxx_prompt=n
- echo "exit 1" >mips
-fi
-chmod +x mips
-$eunicefix mips
-case "$usrinc" in
-'') ;;
-*) dflt="$usrinc";;
-esac
-case "$xxx_prompt" in
-y) fn=d/
- echo " "
- rp='Where are the include files you want to use?'
- . ./getfile
- usrinc="$ans"
- ;;
-*) usrinc="$dflt"
- ;;
-esac
-
-: see how we invoke the C preprocessor
-echo " "
-echo "Now, how can we feed standard input to your C preprocessor..." >&4
-cat <<'EOT' >testcpp.c
-#define ABC abc
-#define XYZ xyz
-ABC.XYZ
-EOT
-cd ..
-if test ! -f cppstdin; then
- if test "X$osname" = "Xaix" -a "X$gccversion" = X; then
- # AIX cc -E doesn't show the absolute headerfile
- # locations but we'll cheat by using the -M flag.
- echo 'cat >.$$.c; rm -f .$$.u; '"$cc"' ${1+"$@"} -M -c .$$.c 2>/dev/null; test -s .$$.u && awk '"'"'$2 ~ /\.h$/ { print "# 0 \""$2"\"" }'"'"' .$$.u; rm -f .$$.o .$$.u; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' > cppstdin
- else
- echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
- fi
-else
- echo "Keeping your $hint cppstdin wrapper."
-fi
-chmod 755 cppstdin
-wrapper=`pwd`/cppstdin
-ok='false'
-cd UU
-
-if $test "X$cppstdin" != "X" && \
- $cppstdin $cppminus <testcpp.c >testcpp.out 2>&1 && \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
-then
- echo "You used to use $cppstdin $cppminus so we'll use that again."
- case "$cpprun" in
- '') echo "But let's see if we can live without a wrapper..." ;;
- *)
- if $cpprun $cpplast <testcpp.c >testcpp.out 2>&1 && \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
- then
- echo "(And we'll use $cpprun $cpplast to preprocess directly.)"
- ok='true'
- else
- echo "(However, $cpprun $cpplast does not work, let's see...)"
- fi
- ;;
- esac
-else
- case "$cppstdin" in
- '') ;;
- *)
- echo "Good old $cppstdin $cppminus does not seem to be of any help..."
- ;;
- esac
-fi
+ xxx=false;
+fi;
+if $xxx; then
+ case "$dflt" in
+ *$2*);;
+ *) dflt="$dflt -D$2";;
+ esac;
+fi'
-if $ok; then
- : nothing
-elif echo 'Maybe "'"$cc"' -E" will work...'; \
- $cc -E <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yup, it does."
- x_cpp="$cc -E"
- x_minus='';
-elif echo 'Nope...maybe "'"$cc"' -E -" will work...'; \
- $cc -E - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yup, it does."
- x_cpp="$cc -E"
- x_minus='-';
-elif echo 'Nope...maybe "'"$cc"' -P" will work...'; \
- $cc -P <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yipee, that works!"
- x_cpp="$cc -P"
- x_minus='';
-elif echo 'Nope...maybe "'"$cc"' -P -" will work...'; \
- $cc -P - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "At long last!"
- x_cpp="$cc -P"
- x_minus='-';
-elif echo 'No such luck, maybe "'$cpp'" will work...'; \
- $cpp <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "It works!"
- x_cpp="$cpp"
- x_minus='';
-elif echo 'Nixed again...maybe "'$cpp' -" will work...'; \
- $cpp - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Hooray, it works! I was beginning to wonder."
- x_cpp="$cpp"
- x_minus='-';
-elif echo 'Uh-uh. Time to get fancy. Trying a wrapper...'; \
- $wrapper <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- x_cpp="$wrapper"
- x_minus=''
- echo "Eureka!"
-else
- dflt=''
- rp="No dice. I can't find a C preprocessor. Name one:"
- . ./myread
- x_cpp="$ans"
- x_minus=''
- $x_cpp <testcpp.c >testcpp.out 2>&1
- if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "OK, that will do." >&4
- else
-echo "Sorry, I can't get that to work. Go find one and rerun Configure." >&4
- exit 1
- fi
-fi
+set signal.h LANGUAGE_C; eval $inctest
-case "$ok" in
-false)
- cppstdin="$x_cpp"
- cppminus="$x_minus"
- cpprun="$x_cpp"
- cpplast="$x_minus"
- set X $x_cpp
- shift
- case "$1" in
- "$cpp")
- echo "Perhaps can we force $cc -E using a wrapper..."
- if $wrapper <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
- then
- echo "Yup, we can."
- cppstdin="$wrapper"
- cppminus='';
- else
- echo "Nope, we'll have to live without it..."
- fi
- ;;
- esac
- case "$cpprun" in
- "$wrapper")
- cpprun=''
- cpplast=''
- ;;
- esac
+case "$usesocks" in
+$define)
+ ccflags="$ccflags -DSOCKS"
;;
esac
-case "$cppstdin" in
-"$wrapper"|'cppstdin') ;;
-*) $rm -f $wrapper;;
+case "$hint" in
+default|recommended) dflt="$ccflags $dflt" ;;
+*) dflt="$ccflags";;
esac
-$rm -f testcpp.c testcpp.out
-: Set private lib path
-case "$plibpth" in
-'') if ./mips; then
- plibpth="$incpath/usr/lib /usr/local/lib /usr/ccs/lib"
- fi;;
-esac
-case "$libpth" in
-' ') dlist='';;
-'') dlist="$loclibpth $plibpth $glibpth";;
-*) dlist="$libpth";;
+case "$dflt" in
+''|' ') dflt=none;;
esac
+$cat <<EOH
-: Now check and see which directories actually exist, avoiding duplicates
-libpth=''
-for xxx in $dlist
-do
- if $test -d $xxx; then
- case " $libpth " in
- *" $xxx "*) ;;
- *) libpth="$libpth $xxx";;
- esac
- fi
-done
-$cat <<'EOM'
+Your C compiler may want other flags. For this question you should include
+-I/whatever and -DWHATEVER flags and any other flags used by the C compiler,
+but you should NOT include libraries or ld flags like -lwhatever. If you
+want $package to honor its debug switch, you should include -DDEBUGGING here.
+Your C compiler might also need additional flags, such as -D_POSIX_SOURCE.
-Some systems have incompatible or broken versions of libraries. Among
-the directories listed in the question below, please remove any you
-know not to be holding relevant libraries, and add any that are needed.
-Say "none" for none.
+To use no flags, specify the word "none".
-EOM
-case "$libpth" in
-'') dflt='none';;
-*)
- set X $libpth
- shift
- dflt=${1+"$@"}
- ;;
-esac
-rp="Directories to use for library searches?"
+EOH
+set X $dflt
+shift
+dflt=${1+"$@"}
+rp="Any additional cc flags?"
. ./myread
case "$ans" in
-none) libpth=' ';;
-*) libpth="$ans";;
+none) ccflags='';;
+*) ccflags="$ans";;
esac
-: compute shared library extension
-case "$so" in
-'')
- if xxx=`./loc libc.sl X $libpth`; $test -f "$xxx"; then
- dflt='sl'
- else
- dflt='so'
- fi
- ;;
-*) dflt="$so";;
+: the following weeds options from ccflags that are of no interest to cpp
+cppflags="$ccflags"
+case "$gccversion" in
+1*) cppflags="$cppflags -D__GNUC__"
esac
-$cat <<EOM
-
-On some systems, shared libraries may be available. Answer 'none' if
-you want to suppress searching of shared libraries for the remaining
-of this configuration.
+case "$mips_type" in
+'');;
+*BSD*) cppflags="$cppflags -DSYSTYPE_BSD43";;
+esac
+case "$cppflags" in
+'');;
+*)
+ echo " "
+ echo "Let me guess what the preprocessor flags are..." >&4
+ set X $cppflags
+ shift
+ cppflags=''
+ $cat >cpp.c <<'EOM'
+#define BLURFL foo
+BLURFL xx LFRULB
EOM
-rp='What is the file extension used for shared libraries?'
-. ./myread
-so="$ans"
-
-: Define several unixisms.
-: Hints files or command line option can be used to override them.
-: The convoluted testing is in case hints files set either the old
-: or the new name.
-case "$_exe" in
-'') case "$exe_ext" in
- '') ;;
- *) _exe="$exe_ext" ;;
- esac
- ;;
-esac
-case "$_a" in
-'') case "$lib_ext" in
- '') _a='.a';;
- *) _a="$lib_ext" ;;
+ previous=''
+ for flag in $*
+ do
+ case "$flag" in
+ -*) ftry="$flag";;
+ *) ftry="$previous $flag";;
+ esac
+ if $cppstdin -DLFRULB=bar $cppflags $ftry $cppminus <cpp.c \
+ >cpp1.out 2>/dev/null && \
+ $cpprun -DLFRULB=bar $cppflags $ftry $cpplast <cpp.c \
+ >cpp2.out 2>/dev/null && \
+ $contains 'foo.*xx.*bar' cpp1.out >/dev/null 2>&1 && \
+ $contains 'foo.*xx.*bar' cpp2.out >/dev/null 2>&1
+ then
+ cppflags="$cppflags $ftry"
+ previous=''
+ else
+ previous="$flag"
+ fi
+ done
+ set X $cppflags
+ shift
+ cppflags=${1+"$@"}
+ case "$cppflags" in
+ *-*) echo "They appear to be: $cppflags";;
esac
+ $rm -f cpp.c cpp?.out
;;
esac
-case "$_o" in
-'') case "$obj_ext" in
- '') _o='.o';;
- *) _o="$obj_ext";;
+
+: flags used in final linking phase
+case "$ldflags" in
+'') if ./venix; then
+ dflt='-i -z'
+ else
+ dflt=''
+ fi
+ case "$ccflags" in
+ *-posix*) dflt="$dflt -posix" ;;
esac
;;
+*) dflt="$ldflags";;
esac
-case "$p_" in
-'') case "$path_sep" in
- '') p_=':';;
- *) p_="$path_sep";;
+
+: Try to guess additional flags to pick up local libraries.
+for thislibdir in $libpth; do
+ case " $loclibpth " in
+ *" $thislibdir "*)
+ case "$dflt " in
+ *"-L$thislibdir "*) ;;
+ *) dflt="$dflt -L$thislibdir" ;;
+ esac
+ ;;
esac
- ;;
-esac
-exe_ext=$_exe
-lib_ext=$_a
-obj_ext=$_o
-path_sep=$p_
+done
-: Which makefile gets called first. This is used by make depend.
-case "$firstmakefile" in
-'') firstmakefile='makefile';;
+case "$dflt" in
+'') dflt='none' ;;
esac
-cat <<EOM
+$cat <<EOH
-Perl can be built to use the SOCKS proxy protocol library. To do so,
-Configure must be run with -Dusesocks.
+Your C linker may need flags. For this question you should
+include -L/whatever and any other flags used by the C linker, but you
+should NOT include libraries like -lwhatever.
-Normally you do not need this and you should answer no.
+Make sure you include the appropriate -L/path flags if your C linker
+does not normally search all of the directories you specified above,
+namely
+ $libpth
+To use no flags, specify the word "none".
-EOM
-case "$usesocks" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-rp='Build Perl for SOCKS?'
+EOH
+
+rp="Any additional ld flags (NOT including libraries)?"
. ./myread
case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
+none) ldflags='';;
+*) ldflags="$ans";;
esac
-set usesocks
-eval $setvar
+rmlist="$rmlist pdp11"
-: Looking for optional libraries
+: coherency check
echo " "
-echo "Checking for optional libraries..." >&4
-case "$libs" in
-' '|'') dflt='';;
-*) dflt="$libs";;
-esac
-case "$libswanted" in
-'') libswanted='c_s';;
-esac
-case "$usesocks" in
-$define)
- libswanted="$libswanted socks5 socks5_sh"
- ;;
-esac
-for thislib in $libswanted; do
-
- if xxx=`./loc lib$thislib.$so.[0-9]'*' X $libpth`;
- $test -f "$xxx" -a "X$ignore_versioned_solibs" = "X"; then
- echo "Found -l$thislib (shared)."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
- elif xxx=`./loc lib$thislib.$so X $libpth` ; $test -f "$xxx"; then
- echo "Found -l$thislib (shared)."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
- elif xxx=`./loc lib$thislib$_a X $libpth`; $test -f "$xxx"; then
- echo "Found -l$thislib."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
- elif xxx=`./loc $thislib$_a X $libpth`; $test -f "$xxx"; then
- echo "Found -l$thislib."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
- elif xxx=`./loc lib${thislib}_s$_a X $libpth`; $test -f "$xxx"; then
- echo "Found -l${thislib}_s."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l${thislib}_s";;
- esac
- elif xxx=`./loc Slib$thislib$_a X $xlibpth`; $test -f "$xxx"; then
- echo "Found -l$thislib."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
- else
- echo "No -l$thislib."
- fi
-done
-set X $dflt
+echo "Checking your choice of C compiler and flags for coherency..." >&4
+$cat > try.c <<'EOF'
+#include <stdio.h>
+int main() { printf("Ok\n"); exit(0); }
+EOF
+set X $cc $optimize $ccflags -o try $ldflags try.c $libs
shift
-dflt="$*"
-case "$libs" in
-'') dflt="$dflt";;
-*) dflt="$libs";;
-esac
-case "$dflt" in
-' '|'') dflt='none';;
-esac
-
-$cat <<EOM
+$cat >try.msg <<'EOM'
+I've tried to compile and run the following simple program:
-In order to compile $package on your machine, a number of libraries
-are usually needed. Include any other special libraries here as well.
-Say "none" for none. The default list is almost always right.
EOM
+$cat try.c >> try.msg
-echo " "
-rp="What libraries to use?"
-. ./myread
-case "$ans" in
-none) libs=' ';;
-*) libs="$ans";;
-esac
+$cat >> try.msg <<EOM
-: determine optimization, if desired, or use for debug flag also
-case "$optimize" in
-' '|$undef) dflt='none';;
-'') dflt='-O';;
-*) dflt="$optimize";;
-esac
-$cat <<EOH
+I used the command:
-By default, $package compiles with the -O flag to use the optimizer.
-Alternately, you might want to use the symbolic debugger, which uses
-the -g flag (on traditional Unix systems). Either flag can be
-specified here. To use neither flag, specify the word "none".
+ $*
+ ./try
-EOH
-rp="What optimizer/debugger flag should be used?"
-. ./myread
-optimize="$ans"
-case "$optimize" in
-'none') optimize=" ";;
-esac
-
-dflt=''
-: We will not override a previous value, but we might want to
-: augment a hint file
-case "$hint" in
-default|recommended)
- case "$gccversion" in
- 1*) dflt='-fpcc-struct-return' ;;
- esac
- case "$optimize" in
- *-g*) dflt="$dflt -DDEBUGGING";;
- esac
- case "$gccversion" in
- 2*) if test -d /etc/conf/kconfig.d &&
- $contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- then
- dflt="$dflt -posix"
- fi
- ;;
- esac
- case "$gccversion" in
- 1*) ;;
- 2.[0-8]*) ;;
- ?*) echo " "
- echo "Checking if your compiler accepts -fno-strict-aliasing" 2>&1
- echo 'int main(void) { return 0; }' > gcctest.c
- if $cc -O2 -fno-strict-aliasing -o gcctest gcctest.c; then
- echo "Yes, it does." 2>&1
- case "$ccflags" in
- *strict-aliasing*)
- echo "Leaving current flags $ccflags alone." 2>&1
- ;;
- *) dflt="$dflt -fno-strict-aliasing" ;;
- esac
- else
- echo "Nope, it doesn't, but that's ok." 2>&1
- fi
- ;;
- esac
- ;;
-esac
-
-case "$mips_type" in
-*BSD*|'') inclwanted="$locincpth $usrinc";;
-*) inclwanted="$locincpth $inclwanted $usrinc/bsd";;
-esac
-for thisincl in $inclwanted; do
- if $test -d $thisincl; then
- if $test x$thisincl != x$usrinc; then
- case "$dflt" in
- *$thisincl*);;
- *) dflt="$dflt -I$thisincl";;
- esac
- fi
- fi
-done
-
-inctest='if $contains $2 $usrinc/$1 >/dev/null 2>&1; then
- xxx=true;
-elif $contains $2 $usrinc/sys/$1 >/dev/null 2>&1; then
- xxx=true;
-else
- xxx=false;
-fi;
-if $xxx; then
- case "$dflt" in
- *$2*);;
- *) dflt="$dflt -D$2";;
- esac;
-fi'
-
-set signal.h LANGUAGE_C; eval $inctest
-
-case "$usesocks" in
-$define)
- ccflags="$ccflags -DSOCKS"
- ;;
-esac
-
-case "$hint" in
-default|recommended) dflt="$ccflags $dflt" ;;
-*) dflt="$ccflags";;
-esac
-
-case "$dflt" in
-''|' ') dflt=none;;
-esac
-$cat <<EOH
-
-Your C compiler may want other flags. For this question you should include
--I/whatever and -DWHATEVER flags and any other flags used by the C compiler,
-but you should NOT include libraries or ld flags like -lwhatever. If you
-want $package to honor its debug switch, you should include -DDEBUGGING here.
-Your C compiler might also need additional flags, such as -D_POSIX_SOURCE.
-
-To use no flags, specify the word "none".
-
-EOH
-set X $dflt
-shift
-dflt=${1+"$@"}
-rp="Any additional cc flags?"
-. ./myread
-case "$ans" in
-none) ccflags='';;
-*) ccflags="$ans";;
-esac
-
-: the following weeds options from ccflags that are of no interest to cpp
-cppflags="$ccflags"
-case "$gccversion" in
-1*) cppflags="$cppflags -D__GNUC__"
-esac
-case "$mips_type" in
-'');;
-*BSD*) cppflags="$cppflags -DSYSTYPE_BSD43";;
-esac
-case "$cppflags" in
-'');;
-*)
- echo " "
- echo "Let me guess what the preprocessor flags are..." >&4
- set X $cppflags
- shift
- cppflags=''
- $cat >cpp.c <<'EOM'
-#define BLURFL foo
-
-BLURFL xx LFRULB
-EOM
- previous=''
- for flag in $*
- do
- case "$flag" in
- -*) ftry="$flag";;
- *) ftry="$previous $flag";;
- esac
- if $cppstdin -DLFRULB=bar $cppflags $ftry $cppminus <cpp.c \
- >cpp1.out 2>/dev/null && \
- $cpprun -DLFRULB=bar $cppflags $ftry $cpplast <cpp.c \
- >cpp2.out 2>/dev/null && \
- $contains 'foo.*xx.*bar' cpp1.out >/dev/null 2>&1 && \
- $contains 'foo.*xx.*bar' cpp2.out >/dev/null 2>&1
- then
- cppflags="$cppflags $ftry"
- previous=''
- else
- previous="$flag"
- fi
- done
- set X $cppflags
- shift
- cppflags=${1+"$@"}
- case "$cppflags" in
- *-*) echo "They appear to be: $cppflags";;
- esac
- $rm -f cpp.c cpp?.out
- ;;
-esac
-
-: flags used in final linking phase
-case "$ldflags" in
-'') if ./venix; then
- dflt='-i -z'
- else
- dflt=''
- fi
- case "$ccflags" in
- *-posix*) dflt="$dflt -posix" ;;
- esac
- ;;
-*) dflt="$ldflags";;
-esac
-
-: Try to guess additional flags to pick up local libraries.
-for thislibdir in $libpth; do
- case " $loclibpth " in
- *" $thislibdir "*)
- case "$dflt " in
- *"-L$thislibdir "*) ;;
- *) dflt="$dflt -L$thislibdir" ;;
- esac
- ;;
- esac
-done
-
-case "$dflt" in
-'') dflt='none' ;;
-esac
-
-$cat <<EOH
-
-Your C linker may need flags. For this question you should
-include -L/whatever and any other flags used by the C linker, but you
-should NOT include libraries like -lwhatever.
-
-Make sure you include the appropriate -L/path flags if your C linker
-does not normally search all of the directories you specified above,
-namely
- $libpth
-To use no flags, specify the word "none".
-
-EOH
-
-rp="Any additional ld flags (NOT including libraries)?"
-. ./myread
-case "$ans" in
-none) ldflags='';;
-*) ldflags="$ans";;
-esac
-rmlist="$rmlist pdp11"
-
-: coherency check
-echo " "
-echo "Checking your choice of C compiler and flags for coherency..." >&4
-$cat > try.c <<'EOF'
-#include <stdio.h>
-int main() { printf("Ok\n"); exit(0); }
-EOF
-set X $cc $optimize $ccflags -o try $ldflags try.c $libs
-shift
-$cat >try.msg <<'EOM'
-I've tried to compile and run the following simple program:
-
-EOM
-$cat try.c >> try.msg
-
-$cat >> try.msg <<EOM
-
-I used the command:
-
- $*
- ./try
-
-and I got the following output:
+and I got the following output:
EOM
dflt=y
esac
$rm -f try try.* core
-: determine filename position in cpp output
-echo " "
-echo "Computing filename position in cpp output for #include directives..." >&4
-echo '#include <stdio.h>' > foo.c
-$cat >fieldn <<EOF
-$startsh
-$cppstdin $cppflags $cppminus <foo.c 2>/dev/null | \
-$grep '^[ ]*#.*stdio\.h' | \
-while read cline; do
- pos=1
- set \$cline
- while $test \$# -gt 0; do
- if $test -r \`echo \$1 | $tr -d '"'\`; then
- echo "\$pos"
- exit 0
- fi
- shift
- pos=\`expr \$pos + 1\`
- done
-done
-EOF
-chmod +x fieldn
-fieldn=`./fieldn`
-$rm -f foo.c fieldn
-case $fieldn in
-'') pos='???';;
-1) pos=first;;
-2) pos=second;;
-3) pos=third;;
-*) pos="${fieldn}th";;
-esac
-echo "Your cpp writes the filename in the $pos field of the line."
-
-: locate header file
-$cat >findhdr <<EOF
-$startsh
-wanted=\$1
-name=''
-for usrincdir in $usrinc
-do
- if test -f \$usrincdir/\$wanted; then
- echo "\$usrincdir/\$wanted"
- exit 0
- fi
-done
-awkprg='{ print \$$fieldn }'
-echo "#include <\$wanted>" > foo\$\$.c
-$cppstdin $cppminus $cppflags < foo\$\$.c 2>/dev/null | \
-$grep "^[ ]*#.*\$wanted" | \
-while read cline; do
- name=\`echo \$cline | $awk "\$awkprg" | $tr -d '"'\`
- case "\$name" in
- *[/\\\\]\$wanted) echo "\$name"; exit 1;;
- *[\\\\/]\$wanted) echo "\$name"; exit 1;;
- *) exit 2;;
- esac;
-done;
-#
-# status = 0: grep returned 0 lines, case statement not executed
-# status = 1: headerfile found
-# status = 2: while loop executed, no headerfile found
-#
-status=\$?
-$rm -f foo\$\$.c;
-if test \$status -eq 1; then
- exit 0;
-fi
-exit 1
-EOF
-chmod +x findhdr
-
-: define an alternate in-header-list? function
-inhdr='echo " "; td=$define; tu=$undef; yyy=$@;
-cont=true; xxf="echo \"<\$1> found.\" >&4";
-case $# in 2) xxnf="echo \"<\$1> NOT found.\" >&4";;
-*) xxnf="echo \"<\$1> NOT found, ...\" >&4";;
+: define an is-a-typedef? function
+typedef='type=$1; var=$2; def=$3; shift; shift; shift; inclist=$@;
+case "$inclist" in
+"") inclist="sys/types.h";;
esac;
-case $# in 4) instead=instead;; *) instead="at last";; esac;
-while $test "$cont"; do
- xxx=`./findhdr $1`
- var=$2; eval "was=\$$2";
- if $test "$xxx" && $test -r "$xxx";
- then eval $xxf;
- eval "case \"\$$var\" in $undef) . ./whoa; esac"; eval "$var=\$td";
- cont="";
- else eval $xxnf;
- eval "case \"\$$var\" in $define) . ./whoa; esac"; eval "$var=\$tu"; fi;
- set $yyy; shift; shift; yyy=$@;
- case $# in 0) cont="";;
- 2) xxf="echo \"but I found <\$1> $instead.\" >&4";
- xxnf="echo \"and I did not find <\$1> either.\" >&4";;
- *) xxf="echo \"but I found <\$1\> instead.\" >&4";
- xxnf="echo \"there is no <\$1>, ...\" >&4";;
- esac;
-done;
-while $test "$yyy";
-do set $yyy; var=$2; eval "was=\$$2";
- eval "case \"\$$var\" in $define) . ./whoa; esac"; eval "$var=\$tu";
- set $yyy; shift; shift; yyy=$@;
-done'
-
-: see if this is a malloc.h system
-set malloc.h i_malloc
-eval $inhdr
+eval "varval=\$$var";
+case "$varval" in
+"")
+ $rm -f temp.c;
+ for inc in $inclist; do
+ echo "#include <$inc>" >>temp.c;
+ done;
+ echo "#ifdef $type" >> temp.c;
+ echo "printf(\"We have $type\");" >> temp.c;
+ echo "#endif" >> temp.c;
+ $cppstdin $cppflags $cppminus < temp.c >temp.E 2>/dev/null;
+ if $contains $type temp.E >/dev/null 2>&1; then
+ eval "$var=\$type";
+ else
+ eval "$var=\$def";
+ fi;
+ $rm -f temp.?;;
+*) eval "$var=\$varval";;
+esac'
-: see if stdlib is available
-set stdlib.h i_stdlib
-eval $inhdr
+: define an is-a-typedef? function that prompts if the type is not available.
+typedef_ask='type=$1; var=$2; def=$3; shift; shift; shift; inclist=$@;
+case "$inclist" in
+"") inclist="sys/types.h";;
+esac;
+eval "varval=\$$var";
+case "$varval" in
+"")
+ $rm -f temp.c;
+ for inc in $inclist; do
+ echo "#include <$inc>" >>temp.c;
+ done;
+ echo "#ifdef $type" >> temp.c;
+ echo "printf(\"We have $type\");" >> temp.c;
+ echo "#endif" >> temp.c;
+ $cppstdin $cppflags $cppminus < temp.c >temp.E 2>/dev/null;
+ echo " " ;
+ echo "$rp" | $sed -e "s/What is/Looking for/" -e "s/?/./";
+ if $contains $type temp.E >/dev/null 2>&1; then
+ echo "$type found." >&4;
+ eval "$var=\$type";
+ else
+ echo "$type NOT found." >&4;
+ dflt="$def";
+ . ./myread ;
+ eval "$var=\$ans";
+ fi;
+ $rm -f temp.?;;
+*) eval "$var=\$varval";;
+esac'
-: determine which malloc to compile in
-echo " "
-case "$usemymalloc" in
-''|[yY]*|true|$define) dflt='y' ;;
-*) dflt='n' ;;
-esac
-rp="Do you wish to attempt to use the malloc that comes with $package?"
-. ./myread
-usemymalloc="$ans"
-case "$ans" in
-y*|true)
- usemymalloc='y'
- mallocsrc='malloc.c'
- mallocobj="malloc$_o"
- d_mymalloc="$define"
- case "$libs" in
- *-lmalloc*)
- : Remove malloc from list of libraries to use
- echo "Removing unneeded -lmalloc from library list" >&4
- set `echo X $libs | $sed -e 's/-lmalloc / /' -e 's/-lmalloc$//'`
- shift
- libs="$*"
- echo "libs = $libs" >&4
- ;;
- esac
- ;;
-*)
- usemymalloc='n'
- mallocsrc=''
- mallocobj=''
- d_mymalloc="$undef"
- ;;
-esac
+: define a shorthand compile call
+compile='
+mc_file=$1;
+shift;
+$cc $optimize $ccflags $ldflags -o ${mc_file} $* ${mc_file}.c $libs > /dev/null 2>&1;'
+: define a shorthand compile call for compilations that should be ok.
+compile_ok='
+mc_file=$1;
+shift;
+$cc $optimize $ccflags $ldflags -o ${mc_file} $* ${mc_file}.c $libs;'
-: compute the return types of malloc and free
+: check for lengths of integral types
echo " "
-$cat >malloc.c <<END
-#$i_malloc I_MALLOC
-#$i_stdlib I_STDLIB
-#include <stdio.h>
-#include <sys/types.h>
-#ifdef I_MALLOC
-#include <malloc.h>
-#endif
-#ifdef I_STDLIB
-#include <stdlib.h>
-#endif
-#ifdef TRY_MALLOC
-void *malloc();
-#endif
-#ifdef TRY_FREE
-void free();
-#endif
-END
-case "$malloctype" in
+case "$intsize" in
'')
- if $cc $ccflags -c -DTRY_MALLOC malloc.c >/dev/null 2>&1; then
- malloctype='void *'
+ echo "Checking to see how big your integers are..." >&4
+ $cat >intsize.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("intsize=%d;\n", (int)sizeof(int));
+ printf("longsize=%d;\n", (int)sizeof(long));
+ printf("shortsize=%d;\n", (int)sizeof(short));
+ exit(0);
+}
+EOCP
+ set intsize
+ if eval $compile_ok && ./intsize > /dev/null; then
+ eval `./intsize`
+ echo "Your integers are $intsize bytes long."
+ echo "Your long integers are $longsize bytes long."
+ echo "Your short integers are $shortsize bytes long."
else
- malloctype='char *'
+ $cat >&4 <<EOM
+!
+Help! I can't compile and run the intsize test program: please enlighten me!
+(This is probably a misconfiguration in your system or libraries, and
+you really ought to fix it. Still, I'll try anyway.)
+!
+EOM
+ dflt=4
+ rp="What is the size of an integer (in bytes)?"
+ . ./myread
+ intsize="$ans"
+ dflt=$intsize
+ rp="What is the size of a long integer (in bytes)?"
+ . ./myread
+ longsize="$ans"
+ dflt=2
+ rp="What is the size of a short integer (in bytes)?"
+ . ./myread
+ shortsize="$ans"
fi
;;
esac
-echo "Your system wants malloc to return '$malloctype', it would seem." >&4
+$rm -f intsize intsize.*
-case "$freetype" in
-'')
- if $cc $ccflags -c -DTRY_FREE malloc.c >/dev/null 2>&1; then
- freetype='void'
- else
- freetype='int'
- fi
- ;;
-esac
-echo "Your system uses $freetype free(), it would seem." >&4
-$rm -f malloc.[co]
-$cat <<EOM
+: see what type lseek is declared as in the kernel
+rp="What is the type used for lseek's offset on this system?"
+set off_t lseektype long stdio.h sys/types.h
+eval $typedef_ask
-The installation process will also create a directory for
-vendor-supplied add-ons. Vendors who supply perl with their system
-may find it convenient to place all vendor-supplied files in this
-directory rather than in the main distribution directory. This will
-ease upgrades between binary-compatible maintenance versions of perl.
+echo " "
+$echo $n "Checking to see how big your file offsets are...$c" >&4
+$cat >try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", (int)sizeof($lseektype));
+ return(0);
+}
+EOCP
+set try
+if eval $compile_ok; then
+ lseeksize=`./try`
+ $echo " $lseeksize bytes." >&4
+else
+ dflt=$longsize
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of your file offsets (in bytes)?"
+ . ./myread
+ lseeksize="$ans"
+fi
+$rm -f try.c try
-Of course you may also use these directories in whatever way you see
-fit. For example, you might use them to access modules shared over a
-company-wide network.
-
-The default answer should be fine for most people.
-This causes further questions about vendor add-ons to be skipped
-and no vendor-specific directories will be configured for perl.
+: see what type file positions are declared as in the library
+rp="What is the type for file position used by fsetpos()?"
+set fpos_t fpostype long stdio.h sys/types.h
+eval $typedef_ask
-EOM
-rp='Do you want to configure vendor-specific add-on directories?'
-case "$usevendorprefix" in
-define|true|[yY]*) dflt=y ;;
-*) dflt=n ;;
+echo " "
+case "$fpostype" in
+*_t) zzz="$fpostype" ;;
+*) zzz="fpos_t" ;;
esac
-. ./myread
-case "$ans" in
-[yY]*) fn=d~+
- rp='Installation prefix to use for vendor-supplied add-ons?'
- case "$vendorprefix" in
- '') dflt='' ;;
- *) dflt=$vendorprefix ;;
- esac
- . ./getfile
- oldvendorprefix=''
- case "$vendorprefix" in
- '') ;;
- *) case "$ans" in
- "$prefix") ;;
- *) oldvendorprefix="$prefix";;
- esac
+$echo $n "Checking the size of $zzz...$c" >&4
+cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ printf("%d\n", (int)sizeof($fpostype));
+ exit(0);
+}
+EOCP
+set try
+if eval $compile_ok; then
+ yyy=`./try`
+ case "$yyy" in
+ '') fpossize=4
+ echo " "
+ echo "(I can't execute the test program--guessing $fpossize.)" >&4
+ ;;
+ *) fpossize=$yyy
+ echo " $fpossize bytes."
;;
esac
- usevendorprefix="$define"
- vendorprefix="$ans"
- vendorprefixexp="$ansexp"
- ;;
-*) usevendorprefix="$undef"
- vendorprefix=''
- vendorprefixexp=''
- ;;
-esac
-
-case "$vendorprefix" in
-'') d_vendorlib="$undef"
- vendorlib=''
- vendorlibexp=''
- ;;
-*) d_vendorlib="$define"
- : determine where vendor-supplied modules go.
- : Usual default is /usr/local/lib/perl5/vendor_perl
- prog=`echo $package | $sed 's/-*[0-9.]*$//'`
- case "$installstyle" in
- *lib/perl5*) dflt=$vendorprefix/lib/$package/vendor_$prog ;;
- *) dflt=$vendorprefix/lib/vendor_$prog ;;
- esac
- fn=d~+
- rp='Pathname for the vendor-supplied library files?'
- . ./getfile
- vendorlib="$ans"
- vendorlibexp="$ansexp"
- : Change installation prefix, if necessary.
- if $test X"$prefix" != X"$installprefix"; then
- installvendorlib=`echo $vendorlibexp | $sed "s#^$prefix#$installprefix#"`
- else
- installvendorlib="$vendorlibexp"
- fi
- ;;
-esac
-
-: Cruising for prototypes
-echo " "
-echo "Checking out function prototypes..." >&4
-$cat >prototype.c <<'EOCP'
-int main(int argc, char *argv[]) {
- exit(0);}
-EOCP
-if $cc $ccflags -c prototype.c >prototype.out 2>&1 ; then
- echo "Your C compiler appears to support function prototypes."
- val="$define"
else
- echo "Your C compiler doesn't seem to understand function prototypes."
- val="$undef"
-fi
-set prototype
-eval $setvar
-$rm -f prototype*
-
-case "$prototype" in
-"$define") ;;
-*) ansi2knr='ansi2knr'
+ dflt="$longsize"
echo " "
- cat <<EOM >&4
+ echo "(I can't compile the test program. Guessing...)" >&4
+ rp="What is the size of your file positions (in bytes)?"
+ . ./myread
+ fpossize="$ans"
+fi
-$me: FATAL ERROR:
-This version of $package can only be compiled by a compiler that
-understands function prototypes. Unfortunately, your C compiler
- $cc $ccflags
-doesn't seem to understand them. Sorry about that.
-If GNU cc is available for your system, perhaps you could try that instead.
-Eventually, we hope to support building Perl with pre-ANSI compilers.
-If you would like to help in that effort, please contact <perlbug@perl.org>.
+case "$lseeksize:$fpossize" in
+8:8) cat <<EOM
-Aborting Configure now.
+You can have files larger than 2 gigabytes.
EOM
- exit 2
- ;;
-esac
-
-: determine where public executables go
-echo " "
-set dflt bin bin
-eval $prefixit
-fn=d~
-rp='Pathname where the public executables will reside?'
-. ./getfile
-if $test "X$ansexp" != "X$binexp"; then
- installbin=''
-fi
-bin="$ans"
-binexp="$ansexp"
-: Change installation prefix, if necessary.
-: XXX Bug? -- ignores Configure -Dinstallprefix setting.
-if $test X"$prefix" != X"$installprefix"; then
- installbin=`echo $binexp | sed "s#^$prefix#$installprefix#"`
-else
- installbin="$binexp"
-fi
+ val="$define" ;;
+*) cat <<EOM
-: determine whether to install perl also as /usr/bin/perl
+Perl can be built to understand large files (files larger than 2 gigabytes)
+on some systems. To do so, Configure must be run with -Duselargefiles.
-echo " "
-if $test -d /usr/bin -a "X$installbin" != X/usr/bin; then
- $cat <<EOM
-Many scripts expect to perl to be installed as /usr/bin/perl.
-I can install the perl you are about to compile also as /usr/bin/perl
-(in addition to $installbin/perl).
+If this doesn't make any sense to you, just accept the default 'y'.
EOM
- case "$installusrbinperl" in
- "$undef"|[nN]*) dflt='n';;
- *) dflt='y';;
- esac
- rp="Do you want to install perl as /usr/bin/perl?"
- . ./myread
- case "$ans" in
- [yY]*) val="$define";;
- *) val="$undef" ;;
- esac
-else
- val="$undef"
-fi
-set installusrbinperl
+ case "$uselargefiles" in
+ "$undef"|false|[nN]*) dflt='n' ;;
+ *) dflt='y' ;;
+ esac
+ rp='Try to understand large files, if available?'
+ . ./myread
+ case "$ans" in
+ y|Y) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ ;;
+esac
+set uselargefiles
eval $setvar
-
-: define a shorthand compile call
-compile='
-mc_file=$1;
-shift;
-$cc $optimize $ccflags $ldflags -o ${mc_file} $* ${mc_file}.c $libs > /dev/null 2>&1;'
-: define a shorthand compile call for compilations that should be ok.
-compile_ok='
-mc_file=$1;
-shift;
-$cc $optimize $ccflags $ldflags -o ${mc_file} $* ${mc_file}.c $libs;'
-
-echo " "
-echo "Checking for GNU C Library..." >&4
-cat >gnulibc.c <<EOM
+case "$uselargefiles" in
+"$define")
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that a large files perl is to be built,
+: we may need to set or change some other defaults.
+ if $test -f uselfs.cbu; then
+ echo "Your platform has some specific hints for large file builds, using them..."
+ . ./uselfs.cbu
+ echo " "
+ $echo $n "Rechecking to see how big your file offsets are...$c" >&4
+ $cat >try.c <<EOCP
+#include <sys/types.h>
#include <stdio.h>
int main()
{
-#ifdef __GLIBC__
- exit(0);
-#else
- exit(1);
-#endif
+ printf("%d\n", (int)sizeof($lseektype));
+ return(0);
}
-EOM
-set gnulibc
-if eval $compile_ok && ./gnulibc; then
- val="$define"
- echo "You are using the GNU C Library"
-else
- val="$undef"
- echo "You are not using the GNU C Library"
-fi
-$rm -f gnulibc*
-set d_gnulibc
-eval $setvar
-
-: see if nm is to be used to determine whether a symbol is defined or not
-case "$usenm" in
-'')
- dflt=''
- case "$d_gnulibc" in
- "$define")
- echo " "
- echo "nm probably won't work on the GNU C Library." >&4
- dflt=n
- ;;
- esac
- case "$dflt" in
- '')
- if $test "$osname" = aix -a ! -f /lib/syscalls.exp; then
+EOCP
+ set try
+ if eval $compile_ok; then
+ lseeksize=`./try`
+ $echo " $lseeksize bytes." >&4
+ else
+ dflt="$lseeksize"
echo " "
- echo "Whoops! This is an AIX system without /lib/syscalls.exp!" >&4
- echo "'nm' won't be sufficient on this sytem." >&4
- dflt=n
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of your file offsets (in bytes)?"
+ . ./myread
+ lseeksize="$ans"
fi
- ;;
- esac
- case "$dflt" in
- '') dflt=`$egrep 'inlibc|csym' $rsrc/Configure | wc -l 2>/dev/null`
- if $test $dflt -gt 20; then
- dflt=y
+ case "$fpostype" in
+ *_t) zzz="$fpostype" ;;
+ *) zzz="fpos_t" ;;
+ esac
+ $echo $n "Rechecking the size of $zzz...$c" >&4
+ $cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ printf("%d\n", (int)sizeof($fpostype));
+ exit(0);
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ yyy=`./try`
+ dflt="$lseeksize"
+ case "$yyy" in
+ '') echo " "
+ echo "(I can't execute the test program--guessing $fpossize.)" >&4
+ ;;
+ *) fpossize=$yyy
+ echo " $fpossize bytes."
+ ;;
+ esac
else
- dflt=n
+ dflt="$fpossize"
+ echo " "
+ echo "(I can't compile the test program. Guessing...)" >&4
+ rp="What is the size of your file positions (in bytes)?"
+ . ./myread
+ fpossize="$ans"
fi
- ;;
- esac
- ;;
-*)
- case "$usenm" in
- true|$define) dflt=y;;
- *) dflt=n;;
- esac
+ $rm -f try.c try
+ fi
;;
esac
-$cat <<EOM
-I can use $nm to extract the symbols from your C libraries. This
-is a time consuming task which may generate huge output on the disk (up
-to 3 megabytes) but that should make the symbols extraction faster. The
-alternative is to skip the 'nm' extraction part and to compile a small
-test program instead to determine whether each symbol is present. If
-you have a fast C compiler and/or if your 'nm' output cannot be parsed,
-this may be the best solution.
-You probably shouldn't let me use 'nm' if you are using the GNU C Library.
+case "$usemorebits" in
+"$define"|true|[yY]*)
+ use64bits="$define"
+ uselongdouble="$define"
+ usemorebits="$define"
+ ;;
+*) usemorebits="$undef"
+ ;;
+esac
+
+case "$intsize:$longsize" in
+8:*|*:8) cat <<EOM
+
+You have natively 64-bit integers.
EOM
-rp="Shall I use $nm to extract C symbols from the libraries?"
-. ./myread
-case "$ans" in
-[Nn]*) usenm=false;;
-*) usenm=true;;
-esac
+ val="$define" ;;
+*) cat <<EOM
-runnm=$usenm
-case "$reuseval" in
-true) runnm=false;;
+Perl can be built to take advantage of 64-bit integer types
+on some systems. To do so, Configure must be run with -Duse64bits.
+
+If this doesn't make any sense to you, just accept the default.
+EOM
+ case "$use64bits" in
+ $define|true|[yY]*) dflt='y';;
+ *) dflt='n';;
+ esac
+ rp='Try to use 64-bit integers, if available?'
+ . ./myread
+ case "$ans" in
+ y|Y) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ ;;
esac
+set use64bits
+eval $setvar
-: nm options which may be necessary
-case "$nm_opt" in
-'') if $test -f /mach_boot; then
- nm_opt='' # Mach
- elif $test -d /usr/ccs/lib; then
- nm_opt='-p' # Solaris (and SunOS?)
- elif $test -f /dgux; then
- nm_opt='-p' # DG-UX
- elif $test -f /lib64/rld; then
- nm_opt='-p' # 64-bit Irix
- else
- nm_opt=''
- fi;;
+case "$archname64" in
+'') archname64='' ;; # not a typo
esac
-: nm options which may be necessary for shared libraries but illegal
-: for archive libraries. Thank you, Linux.
-case "$nm_so_opt" in
-'') case "$myuname" in
- *linux*)
- if $nm --help | $grep 'dynamic' > /dev/null 2>&1; then
- nm_so_opt='--dynamic'
- fi
- ;;
- esac
+case "$use64bits" in
+"$define"|true|[yY]*)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that a 64-bit perl is to be built,
+: we may need to set or change some other defaults.
+ if $test -f use64bits.cbu; then
+ echo "Your platform has some specific hints for 64-bit builds, using them..."
+ . ./use64bits.cbu
+ else
+ $cat <<EOM
+(Your platform doesn't have any specific hints for 64-bit builds.)
+EOM
+ case "$intsize:$longsize" in
+8:*|*:8) cat <<EOM
+(This is probably okay, as your system is a natively 64-bit system.)
+EOM
+ ;;
+ esac
+ case "$gccversion" in
+ '') ;;
+ *) case "$ccflags" in
+ *-DUSE_LONG_LONG*) ;;
+ *) $cat <<EOM
+But since you seem to be using gcc, I will now add -DUSE_LONG_LONG
+to the compilation flags.
+EOM
+ ccflags="$ccflags -DUSE_LONG_LONG"
+ ;;
+ esac
+ ;;
+ esac
+ fi
;;
esac
-case "$runnm" in
-true)
-: get list of predefined functions in a handy place
+: determine the architecture name
echo " "
-case "$libc" in
-'') libc=unknown
- case "$libs" in
- *-lc_s*) libc=`./loc libc_s$_a $libc $libpth`
- esac
+if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
+ tarch=`arch`"-$osname"
+elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
+ if uname -m > tmparch 2>&1 ; then
+ tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
+ -e 's/$/'"-$osname/" tmparch`
+ else
+ tarch="$osname"
+ fi
+ $rm -f tmparch
+else
+ tarch="$osname"
+fi
+case "$myarchname" in
+''|"$tarch") ;;
+*)
+ echo "(Your architecture name used to be $myarchname.)"
+ archname=''
;;
esac
-libnames='';
-case "$libs" in
-'') ;;
-*) for thislib in $libs; do
- case "$thislib" in
- -lc|-lc_s)
- : Handle C library specially below.
+myarchname="$tarch"
+case "$archname" in
+'') dflt="$tarch";;
+*) dflt="$archname";;
+esac
+rp='What is your architecture name'
+. ./myread
+archname="$ans"
+case "$usethreads" in
+$define)
+ echo "Threads selected." >&4
+ case "$archname" in
+ *-thread*) echo "...and architecture name already has -thread." >&4
+ ;;
+ *) archname="$archname-thread"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+esac
+case "$usemultiplicity" in
+$define)
+ echo "Multiplicity selected." >&4
+ case "$archname" in
+ *-multi*) echo "...and architecture name already has -multi." >&4
+ ;;
+ *) archname="$archname-multi"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+esac
+case "$use64bits" in
+$define)
+ case "$archname64" in
+ '')
;;
- -l*)
- thislib=`echo $thislib | $sed -e 's/^-l//'`
- if try=`./loc lib$thislib.$so.'*' X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib.$so X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib$_a X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc $thislib$_a X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc $thislib X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc Slib$thislib$_a X $xlibpth`; $test -f "$try"; then
- :
- else
- try=''
- fi
- libnames="$libnames $try"
+ *)
+ case "$archname" in
+ *-$archname64*) echo "...and architecture name already has $archname64." >&4
+ ;;
+ *) archname="$archname-$archname64"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
;;
- *) libnames="$libnames $thislib" ;;
esac
- done
- ;;
esac
-xxx=normal
-case "$libc" in
-unknown)
- set /lib/libc.$so
- for xxx in $libpth; do
- $test -r $1 || set $xxx/libc.$so
- : The messy sed command sorts on library version numbers.
- $test -r $1 || \
- set `echo blurfl; echo $xxx/libc.$so.[0-9]* | \
- tr ' ' $trnl | egrep -v '\.[A-Za-z]*$' | $sed -e '
- h
- s/[0-9][0-9]*/0000&/g
- s/0*\([0-9][0-9][0-9][0-9][0-9]\)/\1/g
- G
- s/\n/ /' | \
- sort | $sed -e 's/^.* //'`
- eval set \$$#
- done
- $test -r $1 || set /usr/ccs/lib/libc.$so
- $test -r $1 || set /lib/libsys_s$_a
+
+: determine root of directory hierarchy where package will be installed.
+case "$prefix" in
+'')
+ dflt=`./loc . /usr/local /usr/local /local /opt /usr`
;;
*)
- set blurfl
+ dflt="$prefix"
;;
esac
-if $test -r "$1"; then
- echo "Your (shared) C library seems to be in $1."
- libc="$1"
-elif $test -r /lib/libc && $test -r /lib/clib; then
- echo "Your C library seems to be in both /lib/clib and /lib/libc."
- xxx=apollo
- libc='/lib/clib /lib/libc'
- if $test -r /lib/syslib; then
- echo "(Your math library is in /lib/syslib.)"
- libc="$libc /lib/syslib"
- fi
-elif $test -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
- echo "Your C library seems to be in $libc, as you said before."
-elif $test -r $incpath/usr/lib/libc$_a; then
- libc=$incpath/usr/lib/libc$_a;
- echo "Your C library seems to be in $libc. That's fine."
-elif $test -r /lib/libc$_a; then
- libc=/lib/libc$_a;
- echo "Your C library seems to be in $libc. You're normal."
-else
- if tans=`./loc libc$_a blurfl/dyick $libpth`; $test -r "$tans"; then
- :
- elif tans=`./loc libc blurfl/dyick $libpth`; $test -r "$tans"; then
- libnames="$libnames "`./loc clib blurfl/dyick $libpth`
- elif tans=`./loc clib blurfl/dyick $libpth`; $test -r "$tans"; then
- :
- elif tans=`./loc Slibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
- :
- elif tans=`./loc Mlibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
- :
- else
- tans=`./loc Llibc$_a blurfl/dyick $xlibpth`
- fi
- if $test -r "$tans"; then
- echo "Your C library seems to be in $tans, of all places."
- libc=$tans
- else
- libc='blurfl'
- fi
-fi
-if $test $xxx = apollo -o -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
- dflt="$libc"
- cat <<EOM
+$cat <<EOM
-If the guess above is wrong (which it might be if you're using a strange
-compiler, or your machine supports multiple models), you can override it here.
+By default, $package will be installed in $dflt/bin, manual pages
+under $dflt/man, etc..., i.e. with $dflt as prefix for all
+installation directories. Typically this is something like /usr/local.
+If you wish to have binaries under /usr/bin but other parts of the
+installation under /usr/local, that's ok: you will be prompted
+separately for each of the installation directories, the prefix being
+only used to set the defaults.
EOM
-else
- dflt=''
- echo $libpth | tr ' ' $trnl | sort | uniq > libpath
- cat >&4 <<EOM
-I can't seem to find your C library. I've looked in the following places:
+fn=d~
+rp='Installation prefix to use?'
+. ./getfile
+oldprefix=''
+case "$prefix" in
+'') ;;
+*)
+ case "$ans" in
+ "$prefix") ;;
+ *) oldprefix="$prefix";;
+ esac
+ ;;
+esac
+prefix="$ans"
+prefixexp="$ansexp"
+
+: is AFS running?
+echo " "
+case "$afs" in
+$define|true) afs=true ;;
+$undef|false) afs=false ;;
+*) if test -d /afs; then
+ afs=true
+ else
+ afs=false
+ fi
+ ;;
+esac
+if $afs; then
+ echo "AFS may be running... I'll be extra cautious then..." >&4
+else
+ echo "AFS does not seem to be running..." >&4
+fi
+
+: determine installation prefix for where package is to be installed.
+if $afs; then
+$cat <<EOM
+
+Since you are running AFS, I need to distinguish the directory in which
+files will reside from the directory in which they are installed (and from
+which they are presumably copied to the former directory by occult means).
EOM
- $sed 's/^/ /' libpath
- cat <<EOM
+ case "$installprefix" in
+ '') dflt=`echo $prefix | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installprefix";;
+ esac
+else
+$cat <<EOM
-None of these seems to contain your C library. I need to get its name...
+In some special cases, particularly when building $package for distribution,
+it is convenient to distinguish between the directory in which files should
+be installed from the directory ($prefix) in which they
+will eventually reside. For most users, these two directories are the same.
EOM
+ case "$installprefix" in
+ '') dflt=$prefix ;;
+ *) dflt=$installprefix;;
+ esac
fi
-fn=f
-rp='Where is your C library?'
+fn=d~
+rp='What installation prefix should I use for installing files?'
. ./getfile
-libc="$ans"
+installprefix="$ans"
+installprefixexp="$ansexp"
-echo " "
-echo $libc $libnames | tr ' ' $trnl | sort | uniq > libnames
-set X `cat libnames`
-shift
-xxx=files
-case $# in 1) xxx=file; esac
-echo "Extracting names from the following $xxx for later perusal:" >&4
-echo " "
-$sed 's/^/ /' libnames >&4
-echo " "
-$echo $n "This may take a while...$c" >&4
+: set the prefixit variable, to compute a suitable default value
+prefixit='case "$3" in
+""|none)
+ case "$oldprefix" in
+ "") eval "$1=\"\$$2\"";;
+ *)
+ case "$3" in
+ "") eval "$1=";;
+ none)
+ eval "tp=\"\$$2\"";
+ case "$tp" in
+ ""|" ") eval "$1=\"\$$2\"";;
+ *) eval "$1=";;
+ esac;;
+ esac;;
+ esac;;
+*)
+ eval "tp=\"$oldprefix-\$$2-\""; eval "tp=\"$tp\"";
+ case "$tp" in
+ --|/*--|\~*--) eval "$1=\"$prefix/$3\"";;
+ /*-$oldprefix/*|\~*-$oldprefix/*)
+ eval "$1=\`echo \$$2 | sed \"s,^$oldprefix,$prefix,\"\`";;
+ *) eval "$1=\"\$$2\"";;
+ esac;;
+esac'
-for file in $*; do
- case $file in
- *$so*) $nm $nm_so_opt $nm_opt $file 2>/dev/null;;
- *) $nm $nm_opt $file 2>/dev/null;;
- esac
-done >libc.tmp
+: set the base revision
+baserev=5.0
-$echo $n ".$c"
-$grep fprintf libc.tmp > libc.ptf
-xscan='eval "<libc.ptf $com >libc.list"; $echo $n ".$c" >&4'
-xrun='eval "<libc.tmp $com >libc.list"; echo "done" >&4'
-xxx='[ADTSIW]'
-if com="$sed -n -e 's/__IO//' -e 's/^.* $xxx *_[_.]*//p' -e 's/^.* $xxx *//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^__*//' -e 's/^\([a-zA-Z_0-9$]*\).*xtern.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e '/|UNDEF/d' -e '/FUNC..GL/s/^.*|__*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.* D __*//p' -e 's/^.* D //p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^_//' -e 's/^\([a-zA-Z_0-9]*\).*xtern.*text.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$grep '|' | $sed -n -e '/|COMMON/d' -e '/|DATA/d' \
- -e '/ file/d' -e 's/^\([^ ]*\).*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p' -e 's/^.*|FUNC |WEAK .*|//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^__//' -e '/|Undef/d' -e '/|Proc/s/ .*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|Proc .*|Text *| *//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e '/Def. Text/s/.* \([^ ]*\)\$/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^[-0-9a-f ]*_\(.*\)=.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/.*\.text n\ \ \ \.//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="sed -n -e 's/^__.*//' -e 's/[ ]*D[ ]*[0-9]*.*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
+
+: get the patchlevel
+echo " "
+echo "Getting the current patchlevel..." >&4
+if $test -r $rsrc/patchlevel.h;then
+ patchlevel=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
+ subversion=`awk '/define[ ]+PERL_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
+ api_revision=`awk '/define[ ]+PERL_API_REVISION/ {print $3}' $rsrc/patchlevel.h`
+ api_version=`awk '/define[ ]+PERL_API_VERSION/ {print $3}' $rsrc/patchlevel.h`
+ api_subversion=`awk '/define[ ]+PERL_API_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
else
- $nm -p $* 2>/dev/null >libc.tmp
- $grep fprintf libc.tmp > libc.ptf
- if com="$sed -n -e 's/^.* [ADTSIW] *_[_.]*//p' -e 's/^.* [ADTSIW] //p'";\
- eval $xscan; $contains '^fprintf$' libc.list >/dev/null 2>&1
- then
- nm_opt='-p'
- eval $xrun
- else
- echo " "
- echo "$nm didn't seem to work right. Trying $ar instead..." >&4
- com=''
- if $ar t $libc > libc.tmp && $contains '^fprintf$' libc.tmp >/dev/null 2>&1; then
- for thisname in $libnames $libc; do
- $ar t $thisname >>libc.tmp
- done
- $sed -e "s/\\$_o\$//" < libc.tmp > libc.list
- echo "Ok." >&4
- elif test "X$osname" = "Xos2" && $ar tv $libc > libc.tmp; then
- # Repeat libc to extract forwarders to DLL entries too
- for thisname in $libnames $libc; do
- $ar tv $thisname >>libc.tmp
- # Revision 50 of EMX has bug in $ar.
- # it will not extract forwarders to DLL entries
- # Use emximp which will extract exactly them.
- emximp -o tmp.imp $thisname \
- 2>/dev/null && \
- $sed -e 's/^\([_a-zA-Z0-9]*\) .*$/\1/p' \
- < tmp.imp >>libc.tmp
- $rm tmp.imp
- done
- $sed -e "s/\\$_o\$//" -e 's/^ \+//' < libc.tmp > libc.list
- echo "Ok." >&4
- else
- echo "$ar didn't seem to work right." >&4
- echo "Maybe this is a Cray...trying bld instead..." >&4
- if bld t $libc | $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" > libc.list
- then
- for thisname in $libnames; do
- bld t $libnames | \
- $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" >>libc.list
- $ar t $thisname >>libc.tmp
- done
- echo "Ok." >&4
- else
- echo "That didn't work either. Giving up." >&4
- exit 1
- fi
- fi
- fi
-fi
-nm_extract="$com"
-if $test -f /lib/syscalls.exp; then
- echo " "
- echo "Also extracting names from /lib/syscalls.exp for good ole AIX..." >&4
- $sed -n 's/^\([^ ]*\)[ ]*syscall[0-9]*$/\1/p' /lib/syscalls.exp >>libc.list
+ patchlevel=0
+ subversion=0
+ api_revision=0
+ api_version=0
+ api_subversion=0
fi
-;;
+$echo $n "(You have $package" $c
+case "$package" in
+"*$baserev") ;;
+*) $echo $n " $baserev" $c ;;
esac
-$rm -f libnames libpath
-
-: see if dld is available
-set dld.h i_dld
-eval $inhdr
+$echo $n " patchlevel $patchlevel" $c
+test 0 -eq "$subversion" || $echo $n " subversion $subversion" $c
+echo ".)"
+case "$osname" in
+dos|vms)
+ : XXX Should be a Configure test for double-dots in filenames.
+ version=`echo $baserev $patchlevel $subversion | \
+ $awk '{ printf "%d_%d_%d\n", $1, $2, $3 }'`
+ api_versionstring=`echo $api_revision $api_version $api_subversion | \
+ $awk '{ printf "%d_%d_%d\n", $1, $2, $3 }'`
+ ;;
+*)
+ version=`echo $baserev $patchlevel $subversion | \
+ $awk '{ printf "%d.%d.%d\n", $1, $2, $3 }'`
+ api_versionstring=`echo $api_revision $api_version $api_subversion | \
+ $awk '{ printf "%d.%d.%d\n", $1, $2, $3 }'`
+ ;;
+esac
+: Special case the 5.005_xx maintenance series, which used 5.005
+: without any subversion label as a subdirectory in $sitelib
+if test "${api_revision}${api_version}${api_subversion}" = "550"; then
+ api_versionstring='5.005'
+fi
-: is a C symbol defined?
-csym='tlook=$1;
-case "$3" in
--v) tf=libc.tmp; tc=""; tdc="";;
--a) tf=libc.tmp; tc="[0]"; tdc="[]";;
-*) tlook="^$1\$"; tf=libc.list; tc="()"; tdc="()";;
-esac;
-tx=yes;
-case "$reuseval-$4" in
-true-) ;;
-true-*) tx=no; eval "tval=\$$4"; case "$tval" in "") tx=yes;; esac;;
-esac;
-case "$tx" in
-yes)
- case "$runnm" in
- true)
- if $contains $tlook $tf >/dev/null 2>&1;
- then tval=true;
- else tval=false;
- fi;;
- *)
- echo "int main() { extern short $1$tdc; printf(\"%hd\", $1$tc); }" > t.c;
- if $cc $optimize $ccflags $ldflags -o t t.c $libs >/dev/null 2>&1;
- then tval=true;
- else tval=false;
- fi;
- $rm -f t t.c;;
- esac;;
-*)
- case "$tval" in
- $define) tval=true;;
- *) tval=false;;
- esac;;
-esac;
-eval "$2=$tval"'
+: determine installation style
+: For now, try to deduce it from prefix unless it is already set.
+: Reproduce behavior of 5.005 and earlier, maybe drop that in 5.7.
+case "$installstyle" in
+'') case "$prefix" in
+ *perl*) dflt='lib';;
+ *) dflt='lib/perl5' ;;
+ esac
+ ;;
+*) dflt='lib/perl5' ;;
+esac
+: Probably not worth prompting for this since we prompt for all
+: the directories individually, and the prompt would be too long and
+: confusing anyway.
+installstyle=$dflt
-: define an is-in-libc? function
-inlibc='echo " "; td=$define; tu=$undef;
-sym=$1; var=$2; eval "was=\$$2";
-tx=yes;
-case "$reuseval$was" in
-true) ;;
-true*) tx=no;;
-esac;
-case "$tx" in
-yes)
- set $sym tres -f;
- eval $csym;
- case "$tres" in
- true)
- echo "$sym() found." >&4;
- case "$was" in $undef) . ./whoa; esac; eval "$var=\$td";;
- *)
- echo "$sym() NOT found." >&4;
- case "$was" in $define) . ./whoa; esac; eval "$var=\$tu";;
- esac;;
-*)
- case "$was" in
- $define) echo "$sym() found." >&4;;
- *) echo "$sym() NOT found." >&4;;
- esac;;
-esac'
+: determine where private library files go
+: Usual default is /usr/local/lib/perl5/$version.
+: Also allow things like /opt/perl/lib/$version, since
+: /opt/perl/lib/perl5... would be redundant.
+: The default "style" setting is made in installstyle.U
+case "$installstyle" in
+*lib/perl5*) set dflt privlib lib/$package/$version ;;
+*) set dflt privlib lib/$version ;;
+esac
+eval $prefixit
+$cat <<EOM
-: see if dlopen exists
-xxx_runnm="$runnm"
-runnm=false
-set dlopen d_dlopen
-eval $inlibc
-runnm="$xxx_runnm"
+There are some auxiliary files for $package that need to be put into a
+private library directory that is accessible by everyone.
-: determine which dynamic loading, if any, to compile in
-echo " "
-dldir="ext/DynaLoader"
-case "$usedl" in
-$define|y|true)
- dflt='y'
- usedl="$define"
+EOM
+fn=d~+
+rp='Pathname where the private library files will reside?'
+. ./getfile
+privlib="$ans"
+privlibexp="$ansexp"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installprivlib=`echo $privlibexp | sed "s#^$prefix#$installprefix#"`
+else
+ installprivlib="$privlibexp"
+fi
+
+: set the prefixup variable, to restore leading tilda escape
+prefixup='case "$prefixexp" in
+"$prefix") ;;
+*) eval "$1=\`echo \$$1 | sed \"s,^$prefixexp,$prefix,\"\`";;
+esac'
+
+: determine where public architecture dependent libraries go
+set archlib archlib
+eval $prefixit
+: privlib default is /usr/local/lib/$package/$version
+: archlib default is /usr/local/lib/$package/$version/$archname
+: privlib may have an optional trailing /share.
+tdflt=`echo $privlib | $sed 's,/share$,,'`
+tdflt=$tdflt/$archname
+case "$archlib" in
+'') dflt=$tdflt
;;
-$undef|n|false)
- dflt='n'
- usedl="$undef"
+*) dflt="$archlib"
+ ;;
+esac
+$cat <<EOM
+
+$spackage contains architecture-dependent library files. If you are
+sharing libraries in a heterogeneous environment, you might store
+these files in a separate location. Otherwise, you can just include
+them with the rest of the public library files.
+
+EOM
+fn=d+~
+rp='Where do you want to put the public architecture-dependent libraries?'
+. ./getfile
+archlib="$ans"
+archlibexp="$ansexp"
+if $test X"$archlib" = X"$privlib"; then
+ d_archlib="$undef"
+else
+ d_archlib="$define"
+fi
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installarchlib=`echo $archlibexp | sed "s#^$prefix#$installprefix#"`
+else
+ installarchlib="$archlibexp"
+fi
+
+
+: Binary compatibility with 5.005 is not possible for builds
+: with advanced features
+case "$usethreads$usemultiplicity" in
+*define*)
+ bincompat5005="$undef"
+ d_bincompat5005="$undef"
;;
-*)
- dflt='n'
- case "$d_dlopen" in
- $define) dflt='y' ;;
+*) $cat <<EOM
+
+Perl 5.006 can be compiled for binary compatibility with 5.005.
+If you decide to do so, you will be able to continue using most
+of the extensions that were compiled for Perl 5.005.
+
+EOM
+ case "$bincompat5005$d_bincompat5005" in
+ *"$undef"*) dflt=n ;;
+ *) dflt=y ;;
esac
- case "$i_dld" in
- $define) dflt='y' ;;
+ rp='Binary compatibility with Perl 5.005?'
+ . ./myread
+ case "$ans" in
+ y*) val="$define" ;;
+ *) val="$undef" ;;
esac
- : Does a dl_xxx.xs file exist for this operating system
- $test -f $rsrc/$dldir/dl_${osname}.xs && dflt='y'
- ;;
-esac
-rp="Do you wish to use dynamic loading?"
-. ./myread
-usedl="$ans"
-case "$ans" in
-y*) usedl="$define"
- case "$dlsrc" in
- '')
- if $test -f $rsrc/$dldir/dl_${osname}.xs ; then
- dflt="$dldir/dl_${osname}.xs"
- elif $test "$d_dlopen" = "$define" ; then
- dflt="$dldir/dl_dlopen.xs"
- elif $test "$i_dld" = "$define" ; then
- dflt="$dldir/dl_dld.xs"
- else
- dflt=''
- fi
+ set d_bincompat5005
+ eval $setvar
+ case "$d_bincompat5005" in
+ "$define")
+ bincompat5005="$define"
;;
- *) dflt="$dldir/$dlsrc"
+ *) bincompat5005="$undef"
+ d_bincompat5005="$undef"
;;
esac
- echo "The following dynamic loading files are available:"
- : Can not go over to $dldir because getfile has path hard-coded in.
- tdir=`pwd`; cd $rsrc; $ls -C $dldir/dl*.xs; cd $tdir
- rp="Source file to use for dynamic loading"
- fn="fne"
- gfpth="$src"
- . ./getfile
- usedl="$define"
- : emulate basename
- dlsrc=`echo $ans | $sed -e 's@.*/\([^/]*\)$@\1@'`
+ ;;
+esac
- $cat << EOM
-Some systems may require passing special flags to $cc -c to
-compile modules that will be used to create a shared library.
-To use no flags, say "none".
+: see if setuid scripts can be secure
+$cat <<EOM
+
+Some kernels have a bug that prevents setuid #! scripts from being
+secure. Some sites have disabled setuid #! scripts because of this.
+
+First let's decide if your kernel supports secure setuid #! scripts.
+(If setuid #! scripts would be secure but have been disabled anyway,
+don't say that they are secure if asked.)
EOM
- case "$cccdlflags" in
- '') case "$gccversion" in
- '') case "$osname" in
- hpux) dflt='+z' ;;
- next) dflt='none' ;;
- irix*) dflt='-KPIC' ;;
- svr4*|esix*|solaris) dflt='-KPIC' ;;
- sunos) dflt='-pic' ;;
- *) dflt='none' ;;
- esac
- ;;
- *) case "$osname" in
- svr4*|esix*|solaris) dflt='-fPIC' ;;
- *) dflt='-fpic' ;;
- esac ;;
- esac ;;
- ' ') dflt='none' ;;
- *) dflt="$cccdlflags" ;;
- esac
- rp="Any special flags to pass to $cc -c to compile shared library modules?"
- . ./myread
- case "$ans" in
- none) cccdlflags=' ' ;;
- *) cccdlflags="$ans" ;;
- esac
-
- cat << EOM
-
-Some systems use ld to create libraries that can be dynamically loaded,
-while other systems (such as those using ELF) use $cc.
-EOM
- case "$ld" in
- '') $cat >try.c <<'EOM'
-/* Test for whether ELF binaries are produced */
-#include <fcntl.h>
-#include <stdlib.h>
-int main() {
- char b[4];
- int i = open("a.out",O_RDONLY);
- if(i == -1)
- exit(1); /* fail */
- if(read(i,b,4)==4 && b[0]==127 && b[1]=='E' && b[2]=='L' && b[3]=='F')
- exit(0); /* succeed (yes, it's ELF) */
+val="$undef"
+if $test -d /dev/fd; then
+ echo "#!$ls" >reflect
+ chmod +x,u+s reflect
+ ./reflect >flect 2>&1
+ if $contains "/dev/fd" flect >/dev/null; then
+ echo "Congratulations, your kernel has secure setuid scripts!" >&4
+ val="$define"
else
- exit(1); /* fail */
-}
-EOM
- if $cc $ccflags try.c >/dev/null 2>&1 && ./a.out; then
- cat <<EOM
-You appear to have ELF support. I'll use $cc to build dynamic libraries.
-EOM
- dflt="$cc"
- else
- echo "I'll use ld to build dynamic libraries."
- dflt='ld'
- fi
- rm -f try.c a.out
- ;;
- *) dflt="$ld"
- ;;
- esac
-
- rp="What command should be used to create dynamic libraries?"
- . ./myread
- ld="$ans"
-
- cat << EOM
-
-Some systems may require passing special flags to $ld to create a
-library that can be dynamically loaded. If your ld flags include
--L/other/path options to locate libraries outside your loader's normal
-search path, you may need to specify those -L options here as well. To
-use no flags, say "none".
+ $cat <<EOM
+If you are not sure if they are secure, I can check but I'll need a
+username and password different from the one you are using right now.
+If you don't have such a username or don't want me to test, simply
+enter 'none'.
EOM
- case "$lddlflags" in
- '') case "$osname" in
- beos) dflt='-nostart' ;;
- hpux) dflt='-b' ;;
- linux|irix*) dflt='-shared' ;;
- next) dflt='none' ;;
- solaris) dflt='-G' ;;
- sunos) dflt='-assert nodefinitions' ;;
- svr4*|esix*) dflt="-G $ldflags" ;;
- *) dflt='none' ;;
+ rp='Other username to test security of setuid scripts with?'
+ dflt='none'
+ . ./myread
+ case "$ans" in
+ n|none)
+ case "$d_suidsafe" in
+ '') echo "I'll assume setuid scripts are *not* secure." >&4
+ dflt=n;;
+ "$undef")
+ echo "Well, the $hint value is *not* secure." >&4
+ dflt=n;;
+ *) echo "Well, the $hint value *is* secure." >&4
+ dflt=y;;
esac
;;
- *) dflt="$lddlflags" ;;
- esac
-
- : Try to guess additional flags to pick up local libraries.
- : Be careful not to append to a plain 'none'
- case "$dflt" in
- none) dflt='' ;;
- esac
- for thisflag in $ldflags; do
- case "$thisflag" in
- -L*)
- case " $dflt " in
- *" $thisflag "*) ;;
- *) dflt="$dflt $thisflag" ;;
- esac
+ *)
+ $rm -f reflect flect
+ echo "#!$ls" >reflect
+ chmod +x,u+s reflect
+ echo >flect
+ chmod a+w flect
+ echo '"su" will (probably) prompt you for '"$ans's password."
+ su $ans -c './reflect >flect'
+ if $contains "/dev/fd" flect >/dev/null; then
+ echo "Okay, it looks like setuid scripts are secure." >&4
+ dflt=y
+ else
+ echo "I don't think setuid scripts are secure." >&4
+ dflt=n
+ fi
;;
esac
- done
-
- case "$dflt" in
- ''|' ') dflt='none' ;;
- esac
-
- rp="Any special flags to pass to $ld to create a dynamically loaded library?"
- . ./myread
- case "$ans" in
- none) lddlflags=' ' ;;
- *) lddlflags="$ans" ;;
- esac
-
- cat <<EOM
-
-Some systems may require passing special flags to $cc to indicate that
-the resulting executable will use dynamic linking. To use no flags,
-say "none".
+ rp='Does your kernel have *secure* setuid scripts?'
+ . ./myread
+ case "$ans" in
+ [yY]*) val="$define";;
+ *) val="$undef";;
+ esac
+ fi
+else
+ echo "I don't think setuid scripts are secure (no /dev/fd directory)." >&4
+ echo "(That's for file descriptors, not floppy disks.)"
+ val="$undef"
+fi
+set d_suidsafe
+eval $setvar
-EOM
- case "$ccdlflags" in
- '') case "$osname" in
- hpux) dflt='-Wl,-E' ;;
- linux) dflt='-rdynamic' ;;
- next) dflt='none' ;;
- sunos) dflt='none' ;;
- *) dflt='none' ;;
- esac ;;
- ' ') dflt='none' ;;
- *) dflt="$ccdlflags" ;;
- esac
- rp="Any special flags to pass to $cc to use dynamic loading?"
- . ./myread
- case "$ans" in
- none) ccdlflags=' ' ;;
- *) ccdlflags="$ans" ;;
- esac
- ;;
-*) usedl="$undef"
- ld='ld'
- dlsrc='dl_none.xs'
- lddlflags=''
- ccdlflags=''
- ;;
-esac
+$rm -f reflect flect
-also=''
-case "$usedl" in
-$undef)
- # No dynamic loading being used, so don't bother even to prompt.
- useshrplib='false'
+: now see if they want to do setuid emulation
+echo " "
+val="$undef"
+case "$d_suidsafe" in
+"$define")
+ val="$undef"
+ echo "No need to emulate SUID scripts since they are secure here." >& 4
;;
-*) case "$useshrplib" in
- '') case "$osname" in
- svr4*|dgux|dynixptx|esix|powerux|beos)
- dflt=y
- also='Building a shared libperl is required for dynamic loading to work on your system.'
- ;;
- next*)
- case "$osvers" in
- 4*) dflt=y
- also='Building a shared libperl is needed for MAB support.'
- ;;
- *) dflt=n
- ;;
- esac
- ;;
- *) dflt=n
- ;;
- esac
- ;;
- $define|true|[Yy]*)
- dflt=y
- ;;
- *) dflt=n
- ;;
- esac
- $cat << EOM
-
-The perl executable is normally obtained by linking perlmain.c with
-libperl${_a}, any static extensions (usually just DynaLoader), and
-any other libraries needed on this system (such as -lm, etc.). Since
-your system supports dynamic loading, it is probably possible to build
-a shared libperl.$so. If you will have more than one executable linked
-to libperl.$so, this will significantly reduce the size of each
-executable, but it may have a noticeable affect on performance. The
-default is probably sensible for your system.
-$also
+*)
+ $cat <<EOM
+Some systems have disabled setuid scripts, especially systems where
+setuid scripts cannot be secure. On systems where setuid scripts have
+been disabled, the setuid/setgid bits on scripts are currently
+useless. It is possible for $package to detect those bits and emulate
+setuid/setgid in a secure fashion. This emulation will only work if
+setuid scripts have been disabled in your kernel.
EOM
- rp="Build a shared libperl.$so (y/n)"
+ case "$d_dosuid" in
+ "$define") dflt=y ;;
+ *) dflt=n ;;
+ esac
+ rp="Do you want to do setuid/setgid emulation?"
. ./myread
case "$ans" in
- true|$define|[Yy]*)
- useshrplib='true' ;;
- *) useshrplib='false' ;;
+ [yY]*) val="$define";;
+ *) val="$undef";;
esac
;;
esac
+set d_dosuid
+eval $setvar
-case "$useshrplib" in
-true)
- case "$libperl" in
- '')
- # Figure out a good name for libperl.so. Since it gets stored in
- # a version-specific architecture-dependent library, the version
- # number isn't really that important, except for making cc/ld happy.
- #
- # A name such as libperl.so.3.1
- majmin="libperl.$so.$patchlevel.$subversion"
- # A name such as libperl.so.301
- majonly=`echo $patchlevel $subversion |
- $awk '{printf "%d%02d", $1, $2}'`
- majonly=libperl.$so.$majonly
- # I'd prefer to keep the os-specific stuff here to a minimum, and
- # rely on figuring it out from the naming of libc.
- case "${osname}${osvers}" in
- next4*)
- dflt=libperl.5.$so
- # XXX How handle the --version stuff for MAB?
- ;;
- linux*) # ld won't link with a bare -lperl otherwise.
- dflt=libperl.$so
- ;;
- *) # Try to guess based on whether libc has major.minor.
- case "$libc" in
- *libc.$so.[0-9]*.[0-9]*) dflt=$majmin ;;
- *libc.$so.[0-9]*) dflt=$majonly ;;
- *) dflt=libperl.$so ;;
- esac
- ;;
- esac
- ;;
- *) dflt=$libperl
- ;;
- esac
- cat << EOM
+: determine filename position in cpp output
+echo " "
+echo "Computing filename position in cpp output for #include directives..." >&4
+echo '#include <stdio.h>' > foo.c
+$cat >fieldn <<EOF
+$startsh
+$cppstdin $cppflags $cppminus <foo.c 2>/dev/null | \
+$grep '^[ ]*#.*stdio\.h' | \
+while read cline; do
+ pos=1
+ set \$cline
+ while $test \$# -gt 0; do
+ if $test -r \`echo \$1 | $tr -d '"'\`; then
+ echo "\$pos"
+ exit 0
+ fi
+ shift
+ pos=\`expr \$pos + 1\`
+ done
+done
+EOF
+chmod +x fieldn
+fieldn=`./fieldn`
+$rm -f foo.c fieldn
+case $fieldn in
+'') pos='???';;
+1) pos=first;;
+2) pos=second;;
+3) pos=third;;
+*) pos="${fieldn}th";;
+esac
+echo "Your cpp writes the filename in the $pos field of the line."
-I need to select a good name for the shared libperl. If your system uses
-library names with major and minor numbers, then you might want something
-like $majmin. Alternatively, if your system uses a single version
-number for shared libraries, then you might want to use $majonly.
-Or, your system might be quite happy with a simple libperl.$so.
+: locate header file
+$cat >findhdr <<EOF
+$startsh
+wanted=\$1
+name=''
+for usrincdir in $usrinc
+do
+ if test -f \$usrincdir/\$wanted; then
+ echo "\$usrincdir/\$wanted"
+ exit 0
+ fi
+done
+awkprg='{ print \$$fieldn }'
+echo "#include <\$wanted>" > foo\$\$.c
+$cppstdin $cppminus $cppflags < foo\$\$.c 2>/dev/null | \
+$grep "^[ ]*#.*\$wanted" | \
+while read cline; do
+ name=\`echo \$cline | $awk "\$awkprg" | $tr -d '"'\`
+ case "\$name" in
+ *[/\\\\]\$wanted) echo "\$name"; exit 1;;
+ *[\\\\/]\$wanted) echo "\$name"; exit 1;;
+ *) exit 2;;
+ esac;
+done;
+#
+# status = 0: grep returned 0 lines, case statement not executed
+# status = 1: headerfile found
+# status = 2: while loop executed, no headerfile found
+#
+status=\$?
+$rm -f foo\$\$.c;
+if test \$status -eq 1; then
+ exit 0;
+fi
+exit 1
+EOF
+chmod +x findhdr
-Since the shared libperl will get installed into a version-specific
-architecture-dependent directory, the version number of the shared perl
-library probably isn't important, so the default should be o.k.
+: define an alternate in-header-list? function
+inhdr='echo " "; td=$define; tu=$undef; yyy=$@;
+cont=true; xxf="echo \"<\$1> found.\" >&4";
+case $# in 2) xxnf="echo \"<\$1> NOT found.\" >&4";;
+*) xxnf="echo \"<\$1> NOT found, ...\" >&4";;
+esac;
+case $# in 4) instead=instead;; *) instead="at last";; esac;
+while $test "$cont"; do
+ xxx=`./findhdr $1`
+ var=$2; eval "was=\$$2";
+ if $test "$xxx" && $test -r "$xxx";
+ then eval $xxf;
+ eval "case \"\$$var\" in $undef) . ./whoa; esac"; eval "$var=\$td";
+ cont="";
+ else eval $xxnf;
+ eval "case \"\$$var\" in $define) . ./whoa; esac"; eval "$var=\$tu"; fi;
+ set $yyy; shift; shift; yyy=$@;
+ case $# in 0) cont="";;
+ 2) xxf="echo \"but I found <\$1> $instead.\" >&4";
+ xxnf="echo \"and I did not find <\$1> either.\" >&4";;
+ *) xxf="echo \"but I found <\$1\> instead.\" >&4";
+ xxnf="echo \"there is no <\$1>, ...\" >&4";;
+ esac;
+done;
+while $test "$yyy";
+do set $yyy; var=$2; eval "was=\$$2";
+ eval "case \"\$$var\" in $define) . ./whoa; esac"; eval "$var=\$tu";
+ set $yyy; shift; shift; yyy=$@;
+done'
-EOM
- rp='What name do you want to give to the shared libperl?'
- . ./myread
- libperl=$ans
- echo "Ok, I'll use $libperl"
+: see if this is a malloc.h system
+set malloc.h i_malloc
+eval $inhdr
+
+: see if stdlib is available
+set stdlib.h i_stdlib
+eval $inhdr
+
+: determine which malloc to compile in
+echo " "
+case "$usemymalloc" in
+''|[yY]*|true|$define) dflt='y' ;;
+*) dflt='n' ;;
+esac
+rp="Do you wish to attempt to use the malloc that comes with $package?"
+. ./myread
+usemymalloc="$ans"
+case "$ans" in
+y*|true)
+ usemymalloc='y'
+ mallocsrc='malloc.c'
+ mallocobj="malloc$_o"
+ d_mymalloc="$define"
+ case "$libs" in
+ *-lmalloc*)
+ : Remove malloc from list of libraries to use
+ echo "Removing unneeded -lmalloc from library list" >&4
+ set `echo X $libs | $sed -e 's/-lmalloc / /' -e 's/-lmalloc$//'`
+ shift
+ libs="$*"
+ echo "libs = $libs" >&4
+ ;;
+ esac
;;
*)
- libperl="libperl${_a}"
+ usemymalloc='n'
+ mallocsrc=''
+ mallocobj=''
+ d_mymalloc="$undef"
;;
esac
-# Detect old use of shrpdir via undocumented Configure -Dshrpdir
-case "$shrpdir" in
-'') ;;
-*) $cat >&4 <<EOM
-WARNING: Use of the shrpdir variable for the installation location of
-the shared $libperl is not supported. It was never documented and
-will not work in this version. Let me (perlbug@perl.com)
-know of any problems this may cause.
+: compute the return types of malloc and free
+echo " "
+$cat >malloc.c <<END
+#$i_malloc I_MALLOC
+#$i_stdlib I_STDLIB
+#include <stdio.h>
+#include <sys/types.h>
+#ifdef I_MALLOC
+#include <malloc.h>
+#endif
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+#ifdef TRY_MALLOC
+void *malloc();
+#endif
+#ifdef TRY_FREE
+void free();
+#endif
+END
+case "$malloctype" in
+'')
+ if $cc $ccflags -c -DTRY_MALLOC malloc.c >/dev/null 2>&1; then
+ malloctype='void *'
+ else
+ malloctype='char *'
+ fi
+ ;;
+esac
+echo "Your system wants malloc to return '$malloctype', it would seem." >&4
-EOM
- case "$shrpdir" in
- "$archlibexp/CORE")
- $cat >&4 <<EOM
-But your current setting of $shrpdir is
-the default anyway, so it's harmless.
-EOM
- ;;
- *)
- $cat >&4 <<EOM
-Further, your current attempted setting of $shrpdir
-conflicts with the value of $archlibexp/CORE
-that installperl will use.
-EOM
- ;;
- esac
+case "$freetype" in
+'')
+ if $cc $ccflags -c -DTRY_FREE malloc.c >/dev/null 2>&1; then
+ freetype='void'
+ else
+ freetype='int'
+ fi
;;
esac
+echo "Your system uses $freetype free(), it would seem." >&4
+$rm -f malloc.[co]
+$cat <<EOM
-# How will the perl executable find the installed shared $libperl?
-# Add $xxx to ccdlflags.
-# If we can't figure out a command-line option, use $shrpenv to
-# set env LD_RUN_PATH. The main perl makefile uses this.
-shrpdir=$archlibexp/CORE
-xxx=''
-tmp_shrpenv=''
-if "$useshrplib"; then
- case "$osname" in
- aix)
- # We'll set it in Makefile.SH...
- ;;
- solaris|netbsd)
- xxx="-R $shrpdir"
- ;;
- freebsd)
- xxx="-Wl,-R$shrpdir"
- ;;
- linux|irix*|dec_osf)
- xxx="-Wl,-rpath,$shrpdir"
- ;;
- next)
- # next doesn't like the default...
- ;;
- beos)
- # beos doesn't like the default, either.
- ;;
- hpux*)
- # hpux doesn't like the default, either.
- tmp_shrpenv="env LDOPTS=\"+s +b${shrpdir}\""
- ;;
- *)
- tmp_shrpenv="env LD_RUN_PATH=$shrpdir"
- ;;
- esac
- case "$xxx" in
- '') ;;
- *)
- # Only add $xxx if it isn't already in ccdlflags.
- case " $ccdlflags " in
- *" $xxx "*) ;;
- *) ccdlflags="$ccdlflags $xxx"
- cat <<EOM >&4
+The installation process will also create a directory for
+vendor-supplied add-ons. Vendors who supply perl with their system
+may find it convenient to place all vendor-supplied files in this
+directory rather than in the main distribution directory. This will
+ease upgrades between binary-compatible maintenance versions of perl.
-Adding $xxx to the flags
-passed to $ld so that the perl executable will find the
-installed shared $libperl.
+Of course you may also use these directories in whatever way you see
+fit. For example, you might use them to access modules shared over a
+company-wide network.
+
+The default answer should be fine for most people.
+This causes further questions about vendor add-ons to be skipped
+and no vendor-specific directories will be configured for perl.
EOM
- ;;
+rp='Do you want to configure vendor-specific add-on directories?'
+case "$usevendorprefix" in
+define|true|[yY]*) dflt=y ;;
+*) dflt=n ;;
+esac
+. ./myread
+case "$ans" in
+[yY]*) fn=d~+
+ rp='Installation prefix to use for vendor-supplied add-ons?'
+ case "$vendorprefix" in
+ '') dflt='' ;;
+ *) dflt=$vendorprefix ;;
+ esac
+ . ./getfile
+ oldvendorprefix=''
+ case "$vendorprefix" in
+ '') ;;
+ *) case "$ans" in
+ "$prefix") ;;
+ *) oldvendorprefix="$prefix";;
esac
;;
esac
-fi
-# Fix ccdlflags in AIX for building external extensions.
-# (For building Perl itself bare -bE:perl.exp is needed,
-# Makefile.SH takes care of this.)
-case "$osname" in
-aix) ccdlflags="$ccdlflags -bE:$installarchlib/CORE/perl.exp" ;;
-esac
-# Respect a hint or command-line value.
-case "$shrpenv" in
-'') shrpenv="$tmp_shrpenv" ;;
-esac
-case "$ldlibpthname" in
-'') ldlibpthname=LD_LIBRARY_PATH ;;
-none) ldlibpthname='' ;;
+ usevendorprefix="$define"
+ vendorprefix="$ans"
+ vendorprefixexp="$ansexp"
+ ;;
+*) usevendorprefix="$undef"
+ vendorprefix=''
+ vendorprefixexp=''
+ ;;
esac
-: determine where manual pages go
-set man1dir man1dir none
-eval $prefixit
-$cat <<EOM
-
-$spackage has manual pages available in source form.
-EOM
-case "$nroff" in
-nroff)
- echo "However, you don't have nroff, so they're probably useless to you."
- case "$man1dir" in
- '') man1dir="none";;
- esac;;
-esac
-echo "If you don't want the manual sources installed, answer 'none'."
-case "$man1dir" in
-' ') dflt=none
+case "$vendorprefix" in
+'') d_vendorlib="$undef"
+ vendorlib=''
+ vendorlibexp=''
;;
-'')
- lookpath="$prefixexp/man/man1 $prefixexp/man/l_man/man1"
- lookpath="$lookpath $prefixexp/man/p_man/man1"
- lookpath="$lookpath $prefixexp/man/u_man/man1"
- lookpath="$lookpath $prefixexp/man/man.1"
- case "$sysman" in
- */?_man*) dflt=`./loc . $prefixexp/l_man/man1 $lookpath` ;;
- *) dflt=`./loc . $prefixexp/man/man1 $lookpath` ;;
+*) d_vendorlib="$define"
+ : determine where vendor-supplied modules go.
+ : Usual default is /usr/local/lib/perl5/vendor_perl/$version
+ prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+ case "$installstyle" in
+ *lib/perl5*) dflt=$vendorprefix/lib/$package/vendor_$prog/$version ;;
+ *) dflt=$vendorprefix/lib/vendor_$prog/$version ;;
esac
- set dflt
- eval $prefixup
- ;;
-*) dflt="$man1dir"
+ fn=d~+
+ rp='Pathname for the vendor-supplied library files?'
+ . ./getfile
+ vendorlib="$ans"
+ vendorlibexp="$ansexp"
+ : Change installation prefix, if necessary.
+ if $test X"$prefix" != X"$installprefix"; then
+ installvendorlib=`echo $vendorlibexp | $sed "s#^$prefix#$installprefix#"`
+ else
+ installvendorlib="$vendorlibexp"
+ fi
;;
esac
+
+: Cruising for prototypes
echo " "
-fn=dn+~
-rp="Where do the main $spackage manual pages (source) go?"
-. ./getfile
-if $test "X$man1direxp" != "X$ansexp"; then
- installman1dir=''
+echo "Checking out function prototypes..." >&4
+$cat >prototype.c <<'EOCP'
+int main(int argc, char *argv[]) {
+ exit(0);}
+EOCP
+if $cc $ccflags -c prototype.c >prototype.out 2>&1 ; then
+ echo "Your C compiler appears to support function prototypes."
+ val="$define"
+else
+ echo "Your C compiler doesn't seem to understand function prototypes."
+ val="$undef"
fi
-man1dir="$ans"
-man1direxp="$ansexp"
-case "$man1dir" in
-'') man1dir=' '
- installman1dir='';;
+set prototype
+eval $setvar
+$rm -f prototype*
+
+case "$prototype" in
+"$define") ;;
+*) ansi2knr='ansi2knr'
+ echo " "
+ cat <<EOM >&4
+
+$me: FATAL ERROR:
+This version of $package can only be compiled by a compiler that
+understands function prototypes. Unfortunately, your C compiler
+ $cc $ccflags
+doesn't seem to understand them. Sorry about that.
+
+If GNU cc is available for your system, perhaps you could try that instead.
+
+Eventually, we hope to support building Perl with pre-ANSI compilers.
+If you would like to help in that effort, please contact <perlbug@perl.org>.
+
+Aborting Configure now.
+EOM
+ exit 2
+ ;;
esac
+: determine where public executables go
+echo " "
+set dflt bin bin
+eval $prefixit
+fn=d~
+rp='Pathname where the public executables will reside?'
+. ./getfile
+if $test "X$ansexp" != "X$binexp"; then
+ installbin=''
+fi
+bin="$ans"
+binexp="$ansexp"
: Change installation prefix, if necessary.
+: XXX Bug? -- ignores Configure -Dinstallprefix setting.
if $test X"$prefix" != X"$installprefix"; then
- installman1dir=`echo $man1direxp | $sed "s#^$prefix#$installprefix#"`
+ installbin=`echo $binexp | sed "s#^$prefix#$installprefix#"`
else
- installman1dir="$man1direxp"
+ installbin="$binexp"
fi
-: What suffix to use on installed man pages
+$cat <<EOM
-case "$man1dir" in
-' ')
- man1ext='0'
- ;;
+After $package is installed, you may wish to install various
+add-on modules and utilities. Typically, these add-ons will
+be installed under $prefix with the rest
+of this package. However, you may wish to install such add-ons
+elsewhere under a different prefix.
+
+If you do not wish to put everything under a single prefix, that's
+ok. You will be prompted for the individual locations; this siteprefix
+is only used to suggest the defaults.
+
+The default should be fine for most people.
+
+EOM
+fn=d~+
+rp='Installation prefix to use for add-on modules and utilities?'
+: XXX Here might be another good place for an installstyle setting.
+case "$siteprefix" in
+'') dflt=$prefix ;;
+*) dflt=$siteprefix ;;
+esac
+. ./getfile
+oldsiteprefix=''
+case "$siteprefix" in
+'') ;;
*)
- rp="What suffix should be used for the main $spackage man pages?"
- case "$man1ext" in
- '') case "$man1dir" in
- *1) dflt=1 ;;
- *1p) dflt=1p ;;
- *1pm) dflt=1pm ;;
- *l) dflt=l;;
- *n) dflt=n;;
- *o) dflt=o;;
- *p) dflt=p;;
- *C) dflt=C;;
- *L) dflt=L;;
- *L1) dflt=L1;;
- *) dflt=1;;
- esac
- ;;
- *) dflt="$man1ext";;
+ case "$ans" in
+ "$prefix") ;;
+ *) oldsiteprefix="$prefix";;
esac
- . ./myread
- man1ext="$ans"
;;
esac
+siteprefix="$ans"
+siteprefixexp="$ansexp"
-: see if we can have long filenames
-echo " "
-rmlist="$rmlist /tmp/cf$$"
-$test -d /tmp/cf$$ || mkdir /tmp/cf$$
-first=123456789abcdef
-second=/tmp/cf$$/$first
-$rm -f $first $second
-if (echo hi >$first) 2>/dev/null; then
- if $test -f 123456789abcde; then
- echo 'You cannot have filenames longer than 14 characters. Sigh.' >&4
- val="$undef"
- else
- if (echo hi >$second) 2>/dev/null; then
- if $test -f /tmp/cf$$/123456789abcde; then
- $cat <<'EOM'
-That's peculiar... You can have filenames longer than 14 characters, but only
-on some of the filesystems. Maybe you are using NFS. Anyway, to avoid problems
-I shall consider your system cannot support long filenames at all.
-EOM
- val="$undef"
- else
- echo 'You can have filenames longer than 14 characters.' >&4
- val="$define"
- fi
- else
- $cat <<'EOM'
-How confusing! Some of your filesystems are sane enough to allow filenames
-longer than 14 characters but some others like /tmp can't even think about them.
-So, for now on, I shall assume your kernel does not allow them at all.
-EOM
- val="$undef"
- fi
- fi
-else
- $cat <<'EOM'
-You can't have filenames longer than 14 chars. You can't even think about them!
-EOM
- val="$undef"
-fi
-set d_flexfnam
-eval $setvar
-$rm -rf /tmp/cf$$ 123456789abcde*
-
-: determine where library module manual pages go
-set man3dir man3dir none
-eval $prefixit
+: determine where site specific libraries go.
+: Usual default is /usr/local/lib/perl5/site_perl/$version
+: The default "style" setting is made in installstyle.U
+: XXX No longer works with Prefixit stuff.
+prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+case "$installstyle" in
+*lib/perl5*) dflt=$siteprefix/lib/$package/site_$prog/$version ;;
+*) dflt=$siteprefix/lib/site_$prog/$version ;;
+esac
$cat <<EOM
-$spackage has manual pages for many of the library modules.
-EOM
+The installation process will create a directory for
+site-specific extensions and modules. Most users find it convenient
+to place all site-specific files in this directory rather than in the
+main distribution directory.
-case "$nroff" in
-nroff)
- $cat <<'EOM'
-However, you don't have nroff, so they're probably useless to you.
EOM
- case "$man3dir" in
- '') man3dir="none";;
- esac;;
-esac
+fn=d~+
+rp='Pathname for the site-specific library files?'
+. ./getfile
+sitelib="$ans"
+sitelibexp="$ansexp"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitelib=`echo $sitelibexp | sed "s#^$prefix#$installprefix#"`
+else
+ installsitelib="$sitelibexp"
+fi
-case "$d_flexfnam" in
-undef)
- $cat <<'EOM'
-However, your system can't handle the long file names like File::Basename.3.
-EOM
- case "$man3dir" in
- '') man3dir="none";;
- esac;;
+: Determine list of previous versions to include in @INC
+$cat > getverlist <<EOPL
+#!$perl -w
+use File::Basename;
+\$api_versionstring = "$api_versionstring";
+\$version = "$version";
+\$sitelib = "$sitelib";
+\$archname = "$archname";
+EOPL
+ $cat >> getverlist <<'EOPL'
+# Can't have leading @ because metaconfig interprets it as a command!
+;@inc_version_list=();
+$stem=dirname($sitelib);
+# Redo to do opendir/readdir?
+if (-d $stem) {
+ chdir($stem);
+ ;@candidates = glob("5.*");
+}
+else {
+ ;@candidates = ();
+}
+
+# XXX ToDo: These comparisons must be reworked when two-digit
+# subversions come along, so that 5.7.10 compares as greater than
+# 5.7.3! By that time, hope that 5.6.x is sufficiently
+# widespread that we can use the built-in version vectors rather
+# than reinventing them here. For 5.6.0, however, we must
+# assume this script will likely be run by 5.005_0x. --AD 1/2000.
+foreach $d (@candidates) {
+ if ($d lt $version) {
+ if ($d ge $api_versionstring) {
+ unshift(@inc_version_list, "$d/$archname", $d);
+ }
+ elsif ($d ge "5.005") {
+ unshift(@inc_version_list, $d);
+ }
+ }
+ else {
+ # Skip newer version. I.e. don't look in
+ # 5.7.0 if we're installing 5.6.1.
+ }
+}
+
+if (@inc_version_list) {
+ print join(' ', @inc_version_list);
+}
+else {
+ # Blank space to preserve value for next Configure run.
+ print " ";
+}
+EOPL
+chmod +x getverlist
+case "$inc_version_list" in
+'') if test -x $perl; then
+ dflt=`$perl getverlist`
+ else
+ dflt='none'
+ fi
+ ;;
+$undef) dflt='none' ;;
+*) dflt="$inc_version_list" ;;
esac
+$cat <<'EOM'
-echo "If you don't want the manual sources installed, answer 'none'."
-prog=`echo $package | $sed 's/-*[0-9.]*$//'`
-case "$man3dir" in
-'') dflt=`echo $man1dir | $sed -e 's/man1/man3/g' -e 's/man\.1/man\.3/g'`
- if $test -d "$privlib/man/man3"; then
- cat <<EOM >&4
+In order to ease the process of upgrading, this version of perl
+can be configured to use modules built and installed with earlier
+versions of perl that were installed under $prefix. Specify here
+the list of earlier versions that this version of perl should check.
+If Configure detected no earlier versions of perl installed under
+$prefix, then the list will be empty. Answer 'none' to tell perl
+to not search earlier versions.
-WARNING: Previous versions of perl installed man3 pages into
-$privlib/man/man3. This version will suggest a
-new default of $dflt.
+The default should almost always be sensible, so if you're not sure,
+just accept the default.
EOM
- tdflt=$dflt
- dflt='n'
- rp='Do you wish to preserve the old behavior?(y/n)'
- . ./myread
- case "$ans" in
- y*) dflt="$privlib/man/man3" ;;
- *) dflt=$tdflt ;;
- esac
- fi
+
+rp='List of earlier versions to include in @INC?'
+. ./myread
+case "$ans" in
+[Nn]one) inc_version_list=' ' ;;
+*) inc_version_list="$ans" ;;
+esac
+case "$inc_version_list" in
+''|' ')
+ inc_version_list_init='""';;
+*) inc_version_list_init=`echo $inc_version_list |
+ $sed -e 's/^/"/' -e 's/ /","/g' -e 's/$/"/'`
;;
-' ') dflt=none;;
-*) dflt="$man3dir" ;;
esac
+$rm -f getverlist
+
+: determine whether to install perl also as /usr/bin/perl
+
echo " "
-fn=dn+~
-rp="Where do the $package library man pages (source) go?"
-. ./getfile
-man3dir="$ans"
-man3direxp="$ansexp"
-case "$man1dir" in
-'') man3dir=' '
- installman3dir='';;
-esac
+if $test -d /usr/bin -a "X$installbin" != X/usr/bin; then
+ $cat <<EOM
+Many scripts expect to perl to be installed as /usr/bin/perl.
+I can install the perl you are about to compile also as /usr/bin/perl
+(in addition to $installbin/perl).
+EOM
+ case "$installusrbinperl" in
+ "$undef"|[nN]*) dflt='n';;
+ *) dflt='y';;
+ esac
+ rp="Do you want to install perl as /usr/bin/perl?"
+ . ./myread
+ case "$ans" in
+ [yY]*) val="$define";;
+ *) val="$undef" ;;
+ esac
+else
+ val="$undef"
+fi
+set installusrbinperl
+eval $setvar
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installman3dir=`echo $man3direxp | $sed "s#^$prefix#$installprefix#"`
+echo " "
+echo "Checking for GNU C Library..." >&4
+cat >gnulibc.c <<EOM
+#include <stdio.h>
+int main()
+{
+#ifdef __GLIBC__
+ exit(0);
+#else
+ exit(1);
+#endif
+}
+EOM
+set gnulibc
+if eval $compile_ok && ./gnulibc; then
+ val="$define"
+ echo "You are using the GNU C Library"
else
- installman3dir="$man3direxp"
+ val="$undef"
+ echo "You are not using the GNU C Library"
fi
+$rm -f gnulibc*
+set d_gnulibc
+eval $setvar
-: What suffix to use on installed man pages
-case "$man3dir" in
-' ')
- man3ext='0'
+: see if nm is to be used to determine whether a symbol is defined or not
+case "$usenm" in
+'')
+ dflt=''
+ case "$d_gnulibc" in
+ "$define")
+ echo " "
+ echo "nm probably won't work on the GNU C Library." >&4
+ dflt=n
+ ;;
+ esac
+ case "$dflt" in
+ '')
+ if $test "$osname" = aix -a ! -f /lib/syscalls.exp; then
+ echo " "
+ echo "Whoops! This is an AIX system without /lib/syscalls.exp!" >&4
+ echo "'nm' won't be sufficient on this sytem." >&4
+ dflt=n
+ fi
+ ;;
+ esac
+ case "$dflt" in
+ '') dflt=`$egrep 'inlibc|csym' $rsrc/Configure | wc -l 2>/dev/null`
+ if $test $dflt -gt 20; then
+ dflt=y
+ else
+ dflt=n
+ fi
+ ;;
+ esac
;;
*)
- rp="What suffix should be used for the $package library man pages?"
- case "$man3ext" in
- '') case "$man3dir" in
- *3) dflt=3 ;;
- *3p) dflt=3p ;;
- *3pm) dflt=3pm ;;
- *l) dflt=l;;
- *n) dflt=n;;
- *o) dflt=o;;
- *p) dflt=p;;
- *C) dflt=C;;
- *L) dflt=L;;
- *L3) dflt=L3;;
- *) dflt=3;;
- esac
- ;;
- *) dflt="$man3ext";;
+ case "$usenm" in
+ true|$define) dflt=y;;
+ *) dflt=n;;
esac
- . ./myread
- man3ext="$ans"
;;
esac
+$cat <<EOM
-: see if we have to deal with yellow pages, now NIS.
-if $test -d /usr/etc/yp || $test -d /etc/yp; then
- if $test -f /usr/etc/nibindd; then
- echo " "
- echo "I'm fairly confident you're on a NeXT."
- echo " "
- rp='Do you get the hosts file via NetInfo?'
- dflt=y
- case "$hostcat" in
- nidump*) ;;
- '') ;;
- *) dflt=n;;
- esac
- . ./myread
- case "$ans" in
- y*) hostcat='nidump hosts .';;
- *) case "$hostcat" in
- nidump*) hostcat='';;
- esac
- ;;
- esac
- fi
- case "$hostcat" in
- nidump*) ;;
- *)
- case "$hostcat" in
- *ypcat*) dflt=y;;
- '') if $contains '^\+' /etc/passwd >/dev/null 2>&1; then
- dflt=y
- else
- dflt=n
- fi;;
- *) dflt=n;;
- esac
- echo " "
- rp='Are you getting the hosts file via yellow pages?'
- . ./myread
- case "$ans" in
- y*) hostcat='ypcat hosts';;
- *) hostcat='cat /etc/hosts';;
- esac
- ;;
- esac
-fi
-case "$hostcat" in
-'') hostcat='cat /etc/hosts';;
+I can use $nm to extract the symbols from your C libraries. This
+is a time consuming task which may generate huge output on the disk (up
+to 3 megabytes) but that should make the symbols extraction faster. The
+alternative is to skip the 'nm' extraction part and to compile a small
+test program instead to determine whether each symbol is present. If
+you have a fast C compiler and/or if your 'nm' output cannot be parsed,
+this may be the best solution.
+
+You probably shouldn't let me use 'nm' if you are using the GNU C Library.
+
+EOM
+rp="Shall I use $nm to extract C symbols from the libraries?"
+. ./myread
+case "$ans" in
+[Nn]*) usenm=false;;
+*) usenm=true;;
esac
-case "$groupcat" in
-'') groupcat='cat /etc/group';;
+
+runnm=$usenm
+case "$reuseval" in
+true) runnm=false;;
esac
-case "$passcat" in
-'') passcat='cat /etc/passwd';;
+
+: nm options which may be necessary
+case "$nm_opt" in
+'') if $test -f /mach_boot; then
+ nm_opt='' # Mach
+ elif $test -d /usr/ccs/lib; then
+ nm_opt='-p' # Solaris (and SunOS?)
+ elif $test -f /dgux; then
+ nm_opt='-p' # DG-UX
+ elif $test -f /lib64/rld; then
+ nm_opt='-p' # 64-bit Irix
+ else
+ nm_opt=''
+ fi;;
esac
-: now get the host name
+: nm options which may be necessary for shared libraries but illegal
+: for archive libraries. Thank you, Linux.
+case "$nm_so_opt" in
+'') case "$myuname" in
+ *linux*)
+ if $nm --help | $grep 'dynamic' > /dev/null 2>&1; then
+ nm_so_opt='--dynamic'
+ fi
+ ;;
+ esac
+ ;;
+esac
+
+case "$runnm" in
+true)
+: get list of predefined functions in a handy place
echo " "
-echo "Figuring out host name..." >&4
-case "$myhostname" in
-'') cont=true
- echo 'Maybe "hostname" will work...'
- if tans=`sh -c hostname 2>&1` ; then
- myhostname=$tans
- phostname=hostname
- cont=''
- fi
+case "$libc" in
+'') libc=unknown
+ case "$libs" in
+ *-lc_s*) libc=`./loc libc_s$_a $libc $libpth`
+ esac
;;
-*) cont='';;
esac
-if $test "$cont"; then
- if ./xenix; then
- echo 'Oh, dear. Maybe "/etc/systemid" is the key...'
- if tans=`cat /etc/systemid 2>&1` ; then
- myhostname=$tans
- phostname='cat /etc/systemid'
- echo "Whadyaknow. Xenix always was a bit strange..."
- cont=''
+libnames='';
+case "$libs" in
+'') ;;
+*) for thislib in $libs; do
+ case "$thislib" in
+ -lc|-lc_s)
+ : Handle C library specially below.
+ ;;
+ -l*)
+ thislib=`echo $thislib | $sed -e 's/^-l//'`
+ if try=`./loc lib$thislib.$so.'*' X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib.$so X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib$_a X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc $thislib$_a X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc $thislib X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc Slib$thislib$_a X $xlibpth`; $test -f "$try"; then
+ :
+ else
+ try=''
fi
- elif $test -r /etc/systemid; then
- echo "(What is a non-Xenix system doing with /etc/systemid?)"
+ libnames="$libnames $try"
+ ;;
+ *) libnames="$libnames $thislib" ;;
+ esac
+ done
+ ;;
+esac
+xxx=normal
+case "$libc" in
+unknown)
+ set /lib/libc.$so
+ for xxx in $libpth; do
+ $test -r $1 || set $xxx/libc.$so
+ : The messy sed command sorts on library version numbers.
+ $test -r $1 || \
+ set `echo blurfl; echo $xxx/libc.$so.[0-9]* | \
+ tr ' ' $trnl | egrep -v '\.[A-Za-z]*$' | $sed -e '
+ h
+ s/[0-9][0-9]*/0000&/g
+ s/0*\([0-9][0-9][0-9][0-9][0-9]\)/\1/g
+ G
+ s/\n/ /' | \
+ sort | $sed -e 's/^.* //'`
+ eval set \$$#
+ done
+ $test -r $1 || set /usr/ccs/lib/libc.$so
+ $test -r $1 || set /lib/libsys_s$_a
+ ;;
+*)
+ set blurfl
+ ;;
+esac
+if $test -r "$1"; then
+ echo "Your (shared) C library seems to be in $1."
+ libc="$1"
+elif $test -r /lib/libc && $test -r /lib/clib; then
+ echo "Your C library seems to be in both /lib/clib and /lib/libc."
+ xxx=apollo
+ libc='/lib/clib /lib/libc'
+ if $test -r /lib/syslib; then
+ echo "(Your math library is in /lib/syslib.)"
+ libc="$libc /lib/syslib"
fi
-fi
-if $test "$cont"; then
- echo 'No, maybe "uuname -l" will work...'
- if tans=`sh -c 'uuname -l' 2>&1` ; then
- myhostname=$tans
- phostname='uuname -l'
+elif $test -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
+ echo "Your C library seems to be in $libc, as you said before."
+elif $test -r $incpath/usr/lib/libc$_a; then
+ libc=$incpath/usr/lib/libc$_a;
+ echo "Your C library seems to be in $libc. That's fine."
+elif $test -r /lib/libc$_a; then
+ libc=/lib/libc$_a;
+ echo "Your C library seems to be in $libc. You're normal."
+else
+ if tans=`./loc libc$_a blurfl/dyick $libpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc libc blurfl/dyick $libpth`; $test -r "$tans"; then
+ libnames="$libnames "`./loc clib blurfl/dyick $libpth`
+ elif tans=`./loc clib blurfl/dyick $libpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc Slibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc Mlibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
+ :
else
- echo 'Strange. Maybe "uname -n" will work...'
- if tans=`sh -c 'uname -n' 2>&1` ; then
- myhostname=$tans
- phostname='uname -n'
- else
- echo 'Oh well, maybe I can mine it out of whoami.h...'
- if tans=`sh -c $contains' sysname $usrinc/whoami.h' 2>&1` ; then
- myhostname=`echo "$tans" | $sed 's/^.*"\(.*\)"/\1/'`
- phostname="sed -n -e '"'/sysname/s/^.*\"\\(.*\\)\"/\1/{'"' -e p -e q -e '}' <$usrinc/whoami.h"
- else
- case "$myhostname" in
- '') echo "Does this machine have an identity crisis or something?"
- phostname='';;
- *)
- echo "Well, you said $myhostname before..."
- phostname='echo $myhostname';;
- esac
- fi
- fi
+ tans=`./loc Llibc$_a blurfl/dyick $xlibpth`
+ fi
+ if $test -r "$tans"; then
+ echo "Your C library seems to be in $tans, of all places."
+ libc=$tans
+ else
+ libc='blurfl'
fi
fi
-: you do not want to know about this
-set $myhostname
-myhostname=$1
+if $test $xxx = apollo -o -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
+ dflt="$libc"
+ cat <<EOM
-: verify guess
-if $test "$myhostname" ; then
- dflt=y
- rp='Your host name appears to be "'$myhostname'".'" Right?"
- . ./myread
- case "$ans" in
- y*) ;;
- *) myhostname='';;
- esac
-fi
+If the guess above is wrong (which it might be if you're using a strange
+compiler, or your machine supports multiple models), you can override it here.
-: bad guess or no guess
-while $test "X$myhostname" = X ; do
+EOM
+else
dflt=''
- rp="Please type the (one word) name of your host:"
- . ./myread
- myhostname="$ans"
-done
-
-: translate upper to lower if necessary
-case "$myhostname" in
-*[A-Z]*)
- echo "(Normalizing case in your host name)"
- myhostname=`echo $myhostname | ./tr '[A-Z]' '[a-z]'`
- ;;
+ echo $libpth | tr ' ' $trnl | sort | uniq > libpath
+ cat >&4 <<EOM
+I can't seem to find your C library. I've looked in the following places:
+
+EOM
+ $sed 's/^/ /' libpath
+ cat <<EOM
+
+None of these seems to contain your C library. I need to get its name...
+
+EOM
+fi
+fn=f
+rp='Where is your C library?'
+. ./getfile
+libc="$ans"
+
+echo " "
+echo $libc $libnames | tr ' ' $trnl | sort | uniq > libnames
+set X `cat libnames`
+shift
+xxx=files
+case $# in 1) xxx=file; esac
+echo "Extracting names from the following $xxx for later perusal:" >&4
+echo " "
+$sed 's/^/ /' libnames >&4
+echo " "
+$echo $n "This may take a while...$c" >&4
+
+for file in $*; do
+ case $file in
+ *$so*) $nm $nm_so_opt $nm_opt $file 2>/dev/null;;
+ *) $nm $nm_opt $file 2>/dev/null;;
+ esac
+done >libc.tmp
+
+$echo $n ".$c"
+$grep fprintf libc.tmp > libc.ptf
+xscan='eval "<libc.ptf $com >libc.list"; $echo $n ".$c" >&4'
+xrun='eval "<libc.tmp $com >libc.list"; echo "done" >&4'
+xxx='[ADTSIW]'
+if com="$sed -n -e 's/__IO//' -e 's/^.* $xxx *_[_.]*//p' -e 's/^.* $xxx *//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^__*//' -e 's/^\([a-zA-Z_0-9$]*\).*xtern.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e '/|UNDEF/d' -e '/FUNC..GL/s/^.*|__*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.* D __*//p' -e 's/^.* D //p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^_//' -e 's/^\([a-zA-Z_0-9]*\).*xtern.*text.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$grep '|' | $sed -n -e '/|COMMON/d' -e '/|DATA/d' \
+ -e '/ file/d' -e 's/^\([^ ]*\).*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p' -e 's/^.*|FUNC |WEAK .*|//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^__//' -e '/|Undef/d' -e '/|Proc/s/ .*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|Proc .*|Text *| *//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e '/Def. Text/s/.* \([^ ]*\)\$/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^[-0-9a-f ]*_\(.*\)=.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/.*\.text n\ \ \ \.//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="sed -n -e 's/^__.*//' -e 's/[ ]*D[ ]*[0-9]*.*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+else
+ $nm -p $* 2>/dev/null >libc.tmp
+ $grep fprintf libc.tmp > libc.ptf
+ if com="$sed -n -e 's/^.* [ADTSIW] *_[_.]*//p' -e 's/^.* [ADTSIW] //p'";\
+ eval $xscan; $contains '^fprintf$' libc.list >/dev/null 2>&1
+ then
+ nm_opt='-p'
+ eval $xrun
+ else
+ echo " "
+ echo "$nm didn't seem to work right. Trying $ar instead..." >&4
+ com=''
+ if $ar t $libc > libc.tmp && $contains '^fprintf$' libc.tmp >/dev/null 2>&1; then
+ for thisname in $libnames $libc; do
+ $ar t $thisname >>libc.tmp
+ done
+ $sed -e "s/\\$_o\$//" < libc.tmp > libc.list
+ echo "Ok." >&4
+ elif test "X$osname" = "Xos2" && $ar tv $libc > libc.tmp; then
+ # Repeat libc to extract forwarders to DLL entries too
+ for thisname in $libnames $libc; do
+ $ar tv $thisname >>libc.tmp
+ # Revision 50 of EMX has bug in $ar.
+ # it will not extract forwarders to DLL entries
+ # Use emximp which will extract exactly them.
+ emximp -o tmp.imp $thisname \
+ 2>/dev/null && \
+ $sed -e 's/^\([_a-zA-Z0-9]*\) .*$/\1/p' \
+ < tmp.imp >>libc.tmp
+ $rm tmp.imp
+ done
+ $sed -e "s/\\$_o\$//" -e 's/^ \+//' < libc.tmp > libc.list
+ echo "Ok." >&4
+ else
+ echo "$ar didn't seem to work right." >&4
+ echo "Maybe this is a Cray...trying bld instead..." >&4
+ if bld t $libc | $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" > libc.list
+ then
+ for thisname in $libnames; do
+ bld t $libnames | \
+ $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" >>libc.list
+ $ar t $thisname >>libc.tmp
+ done
+ echo "Ok." >&4
+ else
+ echo "That didn't work either. Giving up." >&4
+ exit 1
+ fi
+ fi
+ fi
+fi
+nm_extract="$com"
+if $test -f /lib/syscalls.exp; then
+ echo " "
+ echo "Also extracting names from /lib/syscalls.exp for good ole AIX..." >&4
+ $sed -n 's/^\([^ ]*\)[ ]*syscall[0-9]*$/\1/p' /lib/syscalls.exp >>libc.list
+fi
+;;
esac
+$rm -f libnames libpath
-case "$myhostname" in
-*.*)
- dflt=`expr "X$myhostname" : "X[^.]*\(\..*\)"`
- myhostname=`expr "X$myhostname" : "X\([^.]*\)\."`
- echo "(Trimming domain name from host name--host name is now $myhostname)"
+: see if dld is available
+set dld.h i_dld
+eval $inhdr
+
+: is a C symbol defined?
+csym='tlook=$1;
+case "$3" in
+-v) tf=libc.tmp; tc=""; tdc="";;
+-a) tf=libc.tmp; tc="[0]"; tdc="[]";;
+*) tlook="^$1\$"; tf=libc.list; tc="()"; tdc="()";;
+esac;
+tx=yes;
+case "$reuseval-$4" in
+true-) ;;
+true-*) tx=no; eval "tval=\$$4"; case "$tval" in "") tx=yes;; esac;;
+esac;
+case "$tx" in
+yes)
+ case "$runnm" in
+ true)
+ if $contains $tlook $tf >/dev/null 2>&1;
+ then tval=true;
+ else tval=false;
+ fi;;
+ *)
+ echo "int main() { extern short $1$tdc; printf(\"%hd\", $1$tc); }" > t.c;
+ if $cc $optimize $ccflags $ldflags -o t t.c $libs >/dev/null 2>&1;
+ then tval=true;
+ else tval=false;
+ fi;
+ $rm -f t t.c;;
+ esac;;
+*)
+ case "$tval" in
+ $define) tval=true;;
+ *) tval=false;;
+ esac;;
+esac;
+eval "$2=$tval"'
+
+: define an is-in-libc? function
+inlibc='echo " "; td=$define; tu=$undef;
+sym=$1; var=$2; eval "was=\$$2";
+tx=yes;
+case "$reuseval$was" in
+true) ;;
+true*) tx=no;;
+esac;
+case "$tx" in
+yes)
+ set $sym tres -f;
+ eval $csym;
+ case "$tres" in
+ true)
+ echo "$sym() found." >&4;
+ case "$was" in $undef) . ./whoa; esac; eval "$var=\$td";;
+ *)
+ echo "$sym() NOT found." >&4;
+ case "$was" in $define) . ./whoa; esac; eval "$var=\$tu";;
+ esac;;
+*)
+ case "$was" in
+ $define) echo "$sym() found." >&4;;
+ *) echo "$sym() NOT found." >&4;;
+ esac;;
+esac'
+
+: see if dlopen exists
+xxx_runnm="$runnm"
+runnm=false
+set dlopen d_dlopen
+eval $inlibc
+runnm="$xxx_runnm"
+
+: determine which dynamic loading, if any, to compile in
+echo " "
+dldir="ext/DynaLoader"
+case "$usedl" in
+$define|y|true)
+ dflt='y'
+ usedl="$define"
;;
-*) case "$mydomain" in
+$undef|n|false)
+ dflt='n'
+ usedl="$undef"
+ ;;
+*)
+ dflt='n'
+ case "$d_dlopen" in
+ $define) dflt='y' ;;
+ esac
+ case "$i_dld" in
+ $define) dflt='y' ;;
+ esac
+ : Does a dl_xxx.xs file exist for this operating system
+ $test -f $rsrc/$dldir/dl_${osname}.xs && dflt='y'
+ ;;
+esac
+rp="Do you wish to use dynamic loading?"
+. ./myread
+usedl="$ans"
+case "$ans" in
+y*) usedl="$define"
+ case "$dlsrc" in
'')
- {
- test "X$hostcat" = "Xypcat hosts" &&
- ypmatch "$myhostname" hosts 2>/dev/null |\
- $sed -e 's/[ ]*#.*//; s/$/ /' > hosts && \
- $test -s hosts
- } || {
- $hostcat | $sed -n -e "s/[ ]*#.*//; s/\$/ /
- /[ ]$myhostname[ . ]/p" > hosts
- }
- tmp_re="[ . ]"
- $test x`$awk "/[0-9].*[ ]$myhostname$tmp_re/ { sum++ }
- END { print sum }" hosts` = x1 || tmp_re="[ ]"
- dflt=.`$awk "/[0-9].*[ ]$myhostname$tmp_re/ {for(i=2; i<=NF;i++) print \\\$i}" \
- hosts | $sort | $uniq | \
- $sed -n -e "s/$myhostname\.\([-a-zA-Z0-9_.]\)/\1/p"`
- case `$echo X$dflt` in
- X*\ *) echo "(Several hosts in /etc/hosts matched hostname)"
- dflt=.
- ;;
- X.) echo "(You do not have fully-qualified names in /etc/hosts)"
+ if $test -f $rsrc/$dldir/dl_${osname}.xs ; then
+ dflt="$dldir/dl_${osname}.xs"
+ elif $test "$d_dlopen" = "$define" ; then
+ dflt="$dldir/dl_dlopen.xs"
+ elif $test "$i_dld" = "$define" ; then
+ dflt="$dldir/dl_dld.xs"
+ else
+ dflt=''
+ fi
+ ;;
+ *) dflt="$dldir/$dlsrc"
+ ;;
+ esac
+ echo "The following dynamic loading files are available:"
+ : Can not go over to $dldir because getfile has path hard-coded in.
+ tdir=`pwd`; cd $rsrc; $ls -C $dldir/dl*.xs; cd $tdir
+ rp="Source file to use for dynamic loading"
+ fn="fne"
+ gfpth="$src"
+ . ./getfile
+ usedl="$define"
+ : emulate basename
+ dlsrc=`echo $ans | $sed -e 's@.*/\([^/]*\)$@\1@'`
+
+ $cat << EOM
+
+Some systems may require passing special flags to $cc -c to
+compile modules that will be used to create a shared library.
+To use no flags, say "none".
+
+EOM
+ case "$cccdlflags" in
+ '') case "$gccversion" in
+ '') case "$osname" in
+ hpux) dflt='+z' ;;
+ next) dflt='none' ;;
+ irix*) dflt='-KPIC' ;;
+ svr4*|esix*|solaris) dflt='-KPIC' ;;
+ sunos) dflt='-pic' ;;
+ *) dflt='none' ;;
+ esac
;;
- esac
- case "$dflt" in
- .)
- tans=`./loc resolv.conf X /etc /usr/etc`
- if $test -f "$tans"; then
- echo "(Attempting domain name extraction from $tans)"
- dflt=.`$sed -n -e 's/ / /g' \
- -e 's/^search *\([^ ]*\).*/\1/p' $tans \
- | ./tr '[A-Z]' '[a-z]' 2>/dev/null`
- case "$dflt" in
- .) dflt=.`$sed -n -e 's/ / /g' \
- -e 's/^domain *\([^ ]*\).*/\1/p' $tans \
- | ./tr '[A-Z]' '[a-z]' 2>/dev/null`
- ;;
- esac
- fi
+ *) case "$osname" in
+ svr4*|esix*|solaris) dflt='-fPIC' ;;
+ *) dflt='-fpic' ;;
+ esac ;;
+ esac ;;
+ ' ') dflt='none' ;;
+ *) dflt="$cccdlflags" ;;
+ esac
+ rp="Any special flags to pass to $cc -c to compile shared library modules?"
+ . ./myread
+ case "$ans" in
+ none) cccdlflags=' ' ;;
+ *) cccdlflags="$ans" ;;
+ esac
+
+ cat << EOM
+
+Some systems use ld to create libraries that can be dynamically loaded,
+while other systems (such as those using ELF) use $cc.
+
+EOM
+ case "$ld" in
+ '') $cat >try.c <<'EOM'
+/* Test for whether ELF binaries are produced */
+#include <fcntl.h>
+#include <stdlib.h>
+int main() {
+ char b[4];
+ int i = open("a.out",O_RDONLY);
+ if(i == -1)
+ exit(1); /* fail */
+ if(read(i,b,4)==4 && b[0]==127 && b[1]=='E' && b[2]=='L' && b[3]=='F')
+ exit(0); /* succeed (yes, it's ELF) */
+ else
+ exit(1); /* fail */
+}
+EOM
+ if $cc $ccflags try.c >/dev/null 2>&1 && ./a.out; then
+ cat <<EOM
+You appear to have ELF support. I'll use $cc to build dynamic libraries.
+EOM
+ dflt="$cc"
+ else
+ echo "I'll use ld to build dynamic libraries."
+ dflt='ld'
+ fi
+ rm -f try.c a.out
+ ;;
+ *) dflt="$ld"
+ ;;
+ esac
+
+ rp="What command should be used to create dynamic libraries?"
+ . ./myread
+ ld="$ans"
+
+ cat << EOM
+
+Some systems may require passing special flags to $ld to create a
+library that can be dynamically loaded. If your ld flags include
+-L/other/path options to locate libraries outside your loader's normal
+search path, you may need to specify those -L options here as well. To
+use no flags, say "none".
+
+EOM
+ case "$lddlflags" in
+ '') case "$osname" in
+ beos) dflt='-nostart' ;;
+ hpux) dflt='-b' ;;
+ linux|irix*) dflt='-shared' ;;
+ next) dflt='none' ;;
+ solaris) dflt='-G' ;;
+ sunos) dflt='-assert nodefinitions' ;;
+ svr4*|esix*) dflt="-G $ldflags" ;;
+ *) dflt='none' ;;
+ esac
;;
- esac
- case "$dflt" in
- .) echo "(No help from resolv.conf either -- attempting clever guess)"
- dflt=.`sh -c domainname 2>/dev/null`
- case "$dflt" in
- '') dflt='.';;
- .nis.*|.yp.*|.main.*) dflt=`echo $dflt | $sed -e 's/^\.[^.]*//'`;;
+ *) dflt="$lddlflags" ;;
+ esac
+
+ : Try to guess additional flags to pick up local libraries.
+ : Be careful not to append to a plain 'none'
+ case "$dflt" in
+ none) dflt='' ;;
+ esac
+ for thisflag in $ldflags; do
+ case "$thisflag" in
+ -L*)
+ case " $dflt " in
+ *" $thisflag "*) ;;
+ *) dflt="$dflt $thisflag" ;;
esac
;;
esac
- case "$dflt" in
- .) echo "(Lost all hope -- silly guess then)"
- dflt='.uucp'
- ;;
- esac
- $rm -f hosts
- ;;
- *) dflt="$mydomain";;
- esac;;
-esac
-echo " "
-rp="What is your domain name?"
-. ./myread
-tans="$ans"
-case "$ans" in
-'') ;;
-.*) ;;
-*) tans=".$tans";;
-esac
-mydomain="$tans"
+ done
-: translate upper to lower if necessary
-case "$mydomain" in
-*[A-Z]*)
- echo "(Normalizing case in your domain name)"
- mydomain=`echo $mydomain | ./tr '[A-Z]' '[a-z]'`
- ;;
+ case "$dflt" in
+ ''|' ') dflt='none' ;;
+ esac
+
+ rp="Any special flags to pass to $ld to create a dynamically loaded library?"
+ . ./myread
+ case "$ans" in
+ none) lddlflags=' ' ;;
+ *) lddlflags="$ans" ;;
+ esac
+
+ cat <<EOM
+
+Some systems may require passing special flags to $cc to indicate that
+the resulting executable will use dynamic linking. To use no flags,
+say "none".
+
+EOM
+ case "$ccdlflags" in
+ '') case "$osname" in
+ hpux) dflt='-Wl,-E' ;;
+ linux) dflt='-rdynamic' ;;
+ next) dflt='none' ;;
+ sunos) dflt='none' ;;
+ *) dflt='none' ;;
+ esac ;;
+ ' ') dflt='none' ;;
+ *) dflt="$ccdlflags" ;;
+ esac
+ rp="Any special flags to pass to $cc to use dynamic linking?"
+ . ./myread
+ case "$ans" in
+ none) ccdlflags=' ' ;;
+ *) ccdlflags="$ans" ;;
+ esac
+ ;;
+*) usedl="$undef"
+ ld='ld'
+ dlsrc='dl_none.xs'
+ lddlflags=''
+ ccdlflags=''
+ ;;
esac
-: a little sanity check here
-case "$phostname" in
-'') ;;
-*)
- case `$phostname | ./tr '[A-Z]' '[a-z]'` in
- $myhostname$mydomain|$myhostname) ;;
- *)
- case "$phostname" in
- sed*)
- echo "(That doesn't agree with your whoami.h file, by the way.)"
+also=''
+case "$usedl" in
+$undef)
+ # No dynamic loading being used, so don't bother even to prompt.
+ useshrplib='false'
+ ;;
+*) case "$useshrplib" in
+ '') case "$osname" in
+ svr4*|dgux|dynixptx|esix|powerux|beos|cygwin*)
+ dflt=y
+ also='Building a shared libperl is required for dynamic loading to work on your system.'
;;
- *)
- echo "(That doesn't agree with your $phostname command, by the way.)"
+ next*)
+ case "$osvers" in
+ 4*) dflt=y
+ also='Building a shared libperl is needed for MAB support.'
+ ;;
+ *) dflt=n
+ ;;
+ esac
+ ;;
+ *) dflt=n
;;
esac
- ;;
+ ;;
+ $define|true|[Yy]*)
+ dflt=y
+ ;;
+ *) dflt=n
+ ;;
esac
- ;;
-esac
-
-$cat <<EOM
+ $cat << EOM
-I need to get your e-mail address in Internet format if possible, i.e.
-something like user@host.domain. Please answer accurately since I have
-no easy means to double check it. The default value provided below
-is most probably close to the reality but may not be valid from outside
-your organization...
+The perl executable is normally obtained by linking perlmain.c with
+libperl${_a}, any static extensions (usually just DynaLoader), and
+any other libraries needed on this system (such as -lm, etc.). Since
+your system supports dynamic loading, it is probably possible to build
+a shared libperl.$so. If you will have more than one executable linked
+to libperl.$so, this will significantly reduce the size of each
+executable, but it may have a noticeable affect on performance. The
+default is probably sensible for your system.
+$also
EOM
-cont=x
-while test "$cont"; do
- case "$cf_email" in
- '') dflt="$cf_by@$myhostname$mydomain";;
- *) dflt="$cf_email";;
- esac
- rp='What is your e-mail address?'
+ rp="Build a shared libperl.$so (y/n)"
. ./myread
- cf_email="$ans"
- case "$cf_email" in
- *@*.*) cont='' ;;
- *)
- rp='Address does not look like an Internet one. Use it anyway?'
- case "$fastread" in
- yes) dflt=y ;;
- *) dflt=n ;;
- esac
- . ./myread
- case "$ans" in
- y*) cont='' ;;
- *) echo " " ;;
+ case "$ans" in
+ true|$define|[Yy]*)
+ useshrplib='true' ;;
+ *) useshrplib='false' ;;
+ esac
+ ;;
+esac
+
+case "$useshrplib" in
+true)
+ case "$libperl" in
+ '')
+ # Figure out a good name for libperl.so. Since it gets stored in
+ # a version-specific architecture-dependent library, the version
+ # number isn't really that important, except for making cc/ld happy.
+ #
+ # A name such as libperl.so.3.1
+ majmin="libperl.$so.$patchlevel.$subversion"
+ # A name such as libperl.so.301
+ majonly=`echo $patchlevel $subversion |
+ $awk '{printf "%d%02d", $1, $2}'`
+ majonly=libperl.$so.$majonly
+ # I'd prefer to keep the os-specific stuff here to a minimum, and
+ # rely on figuring it out from the naming of libc.
+ case "${osname}${osvers}" in
+ next4*)
+ dflt=libperl.5.$so
+ # XXX How handle the --version stuff for MAB?
+ ;;
+ linux*) # ld won't link with a bare -lperl otherwise.
+ dflt=libperl.$so
+ ;;
+ cygwin*) # include version
+ dflt=`echo libperl$version | sed -e 's/\./_/g'`$lib_ext
+ ;;
+ *) # Try to guess based on whether libc has major.minor.
+ case "$libc" in
+ *libc.$so.[0-9]*.[0-9]*) dflt=$majmin ;;
+ *libc.$so.[0-9]*) dflt=$majonly ;;
+ *) dflt=libperl.$so ;;
+ esac
+ ;;
esac
;;
+ *) dflt=$libperl
+ ;;
esac
-done
+ cat << EOM
-$cat <<EOM
+I need to select a good name for the shared libperl. If your system uses
+library names with major and minor numbers, then you might want something
+like $majmin. Alternatively, if your system uses a single version
+number for shared libraries, then you might want to use $majonly.
+Or, your system might be quite happy with a simple libperl.$so.
-If you or somebody else will be maintaining perl at your site, please
-fill in the correct e-mail address here so that they may be contacted
-if necessary. Currently, the "perlbug" program included with perl
-will send mail to this address in addition to perlbug@perl.com. You may
-enter "none" for no administrator.
+Since the shared libperl will get installed into a version-specific
+architecture-dependent directory, the version number of the shared perl
+library probably isn't important, so the default should be o.k.
EOM
-case "$perladmin" in
-'') dflt="$cf_email";;
-*) dflt="$perladmin";;
+ rp='What name do you want to give to the shared libperl?'
+ . ./myread
+ libperl=$ans
+ echo "Ok, I'll use $libperl"
+ ;;
+*)
+ libperl="libperl${_a}"
+ ;;
esac
-rp='Perl administrator e-mail address'
-. ./myread
-perladmin="$ans"
-
-: figure out how to guarantee perl startup
-case "$startperl" in
-'')
- case "$sharpbang" in
- *!)
- $cat <<EOH
-
-I can use the #! construct to start perl on your system. This will
-make startup of perl scripts faster, but may cause problems if you
-want to share those scripts and perl is not in a standard place
-($binexp/perl) on all your platforms. The alternative is to force
-a shell by starting the script with a single ':' character.
-
-EOH
- dflt="$binexp/perl"
- rp='What shall I put after the #! to start up perl ("none" to not use #!)?'
- . ./myread
- case "$ans" in
- none) startperl=": # use perl";;
- *) startperl="#!$ans"
- if $test 30 -lt `echo "$ans" | wc -c`; then
- $cat >&4 <<EOM
-WARNING: Some systems limit the #! command to 32 characters.
-If you experience difficulty running Perl scripts with #!, try
-installing Perl in a directory with a shorter pathname.
+# Detect old use of shrpdir via undocumented Configure -Dshrpdir
+case "$shrpdir" in
+'') ;;
+*) $cat >&4 <<EOM
+WARNING: Use of the shrpdir variable for the installation location of
+the shared $libperl is not supported. It was never documented and
+will not work in this version. Let me (perlbug@perl.com)
+know of any problems this may cause.
EOM
- fi ;;
- esac
+ case "$shrpdir" in
+ "$archlibexp/CORE")
+ $cat >&4 <<EOM
+But your current setting of $shrpdir is
+the default anyway, so it's harmless.
+EOM
;;
- *) startperl=": # use perl"
+ *)
+ $cat >&4 <<EOM
+Further, your current attempted setting of $shrpdir
+conflicts with the value of $archlibexp/CORE
+that installperl will use.
+EOM
;;
esac
;;
esac
-echo "I'll use $startperl to start perl scripts."
-: figure best path for perl in scripts
-case "$perlpath" in
-'')
- perlpath="$binexp/perl"
- case "$startperl" in
- *!*) ;;
+# How will the perl executable find the installed shared $libperl?
+# Add $xxx to ccdlflags.
+# If we can't figure out a command-line option, use $shrpenv to
+# set env LD_RUN_PATH. The main perl makefile uses this.
+shrpdir=$archlibexp/CORE
+xxx=''
+tmp_shrpenv=''
+if "$useshrplib"; then
+ case "$osname" in
+ aix)
+ # We'll set it in Makefile.SH...
+ ;;
+ solaris|netbsd)
+ xxx="-R $shrpdir"
+ ;;
+ freebsd)
+ xxx="-Wl,-R$shrpdir"
+ ;;
+ linux|irix*|dec_osf)
+ xxx="-Wl,-rpath,$shrpdir"
+ ;;
+ next)
+ # next doesn't like the default...
+ ;;
+ beos)
+ # beos doesn't like the default, either.
+ ;;
+ hpux*)
+ # hpux doesn't like the default, either.
+ tmp_shrpenv="env LDOPTS=\"+s +b${shrpdir}\""
+ ;;
*)
- $cat <<EOH
+ tmp_shrpenv="env LD_RUN_PATH=$shrpdir"
+ ;;
+ esac
+ case "$xxx" in
+ '') ;;
+ *)
+ # Only add $xxx if it isn't already in ccdlflags.
+ case " $ccdlflags " in
+ *" $xxx "*) ;;
+ *) ccdlflags="$ccdlflags $xxx"
+ cat <<EOM >&4
-I will use the "eval 'exec'" idiom to start Perl on your system.
-I can use the full path of your Perl binary for this purpose, but
-doing so may cause problems if you want to share those scripts and
-Perl is not always in a standard place ($binexp/perl).
+Adding $xxx to the flags
+passed to $ld so that the perl executable will find the
+installed shared $libperl.
-EOH
- dflt="$binexp/perl"
- rp="What path shall I use in \"eval 'exec'\"?"
- . ./myread
- perlpath="$ans"
+EOM
+ ;;
+ esac
;;
esac
- ;;
+fi
+# Fix ccdlflags in AIX for building external extensions.
+# (For building Perl itself bare -bE:perl.exp is needed,
+# Makefile.SH takes care of this.)
+case "$osname" in
+aix) ccdlflags="$ccdlflags -bE:$installarchlib/CORE/perl.exp" ;;
esac
-case "$startperl" in
-*!*) ;;
-*) echo "I'll use $perlpath in \"eval 'exec'\"" ;;
+# Respect a hint or command-line value.
+case "$shrpenv" in
+'') shrpenv="$tmp_shrpenv" ;;
+esac
+case "$ldlibpthname" in
+'') ldlibpthname=LD_LIBRARY_PATH ;;
+none) ldlibpthname='' ;;
esac
-: determine where public executable scripts go
-set scriptdir scriptdir
+: determine where manual pages go
+set man1dir man1dir none
eval $prefixit
-case "$scriptdir" in
+$cat <<EOM
+
+$spackage has manual pages available in source form.
+EOM
+case "$nroff" in
+nroff)
+ echo "However, you don't have nroff, so they're probably useless to you."
+ case "$man1dir" in
+ '') man1dir="none";;
+ esac;;
+esac
+echo "If you don't want the manual sources installed, answer 'none'."
+case "$man1dir" in
+' ') dflt=none
+ ;;
'')
- dflt="$bin"
- : guess some guesses
- $test -d /usr/share/scripts && dflt=/usr/share/scripts
- $test -d /usr/share/bin && dflt=/usr/share/bin
- $test -d /usr/local/script && dflt=/usr/local/script
- $test -d /usr/local/scripts && dflt=/usr/local/scripts
- $test -d $prefixexp/script && dflt=$prefixexp/script
+ lookpath="$prefixexp/man/man1 $prefixexp/man/l_man/man1"
+ lookpath="$lookpath $prefixexp/man/p_man/man1"
+ lookpath="$lookpath $prefixexp/man/u_man/man1"
+ lookpath="$lookpath $prefixexp/man/man.1"
+ case "$sysman" in
+ */?_man*) dflt=`./loc . $prefixexp/l_man/man1 $lookpath` ;;
+ *) dflt=`./loc . $prefixexp/man/man1 $lookpath` ;;
+ esac
set dflt
eval $prefixup
;;
-*) dflt="$scriptdir"
+*) dflt="$man1dir"
;;
esac
-$cat <<EOM
-
-Some installations have a separate directory just for executable scripts so
-that they can mount it across multiple architectures but keep the scripts in
-one spot. You might, for example, have a subdirectory of /usr/share for this.
-Or you might just lump your scripts in with all your other executables.
-
-EOM
-fn=d~
-rp='Where do you keep publicly executable scripts?'
+echo " "
+fn=dn+~
+rp="Where do the main $spackage manual pages (source) go?"
. ./getfile
-if $test "X$ansexp" != "X$scriptdirexp"; then
- installscript=''
+if $test "X$man1direxp" != "X$ansexp"; then
+ installman1dir=''
fi
-scriptdir="$ans"
-scriptdirexp="$ansexp"
+man1dir="$ans"
+man1direxp="$ansexp"
+case "$man1dir" in
+'') man1dir=' '
+ installman1dir='';;
+esac
+
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installscript=`echo $scriptdirexp | sed "s#^$prefix#$installprefix#"`
+ installman1dir=`echo $man1direxp | $sed "s#^$prefix#$installprefix#"`
else
- installscript="$scriptdirexp"
+ installman1dir="$man1direxp"
fi
-$cat <<EOM
+: What suffix to use on installed man pages
-After $package is installed, you may wish to install various
-add-on modules and utilities. Typically, these add-ons will
-be installed under $prefix with the rest
-of this package. However, you may wish to install such add-ons
-elsewhere under a different prefix.
+case "$man1dir" in
+' ')
+ man1ext='0'
+ ;;
+*)
+ rp="What suffix should be used for the main $spackage man pages?"
+ case "$man1ext" in
+ '') case "$man1dir" in
+ *1) dflt=1 ;;
+ *1p) dflt=1p ;;
+ *1pm) dflt=1pm ;;
+ *l) dflt=l;;
+ *n) dflt=n;;
+ *o) dflt=o;;
+ *p) dflt=p;;
+ *C) dflt=C;;
+ *L) dflt=L;;
+ *L1) dflt=L1;;
+ *) dflt=1;;
+ esac
+ ;;
+ *) dflt="$man1ext";;
+ esac
+ . ./myread
+ man1ext="$ans"
+ ;;
+esac
-If you do not wish to put everything under a single prefix, that's
-ok. You will be prompted for the individual locations; this siteprefix
-is only used to suggest the defaults.
+: see if we can have long filenames
+echo " "
+rmlist="$rmlist /tmp/cf$$"
+$test -d /tmp/cf$$ || mkdir /tmp/cf$$
+first=123456789abcdef
+second=/tmp/cf$$/$first
+$rm -f $first $second
+if (echo hi >$first) 2>/dev/null; then
+ if $test -f 123456789abcde; then
+ echo 'You cannot have filenames longer than 14 characters. Sigh.' >&4
+ val="$undef"
+ else
+ if (echo hi >$second) 2>/dev/null; then
+ if $test -f /tmp/cf$$/123456789abcde; then
+ $cat <<'EOM'
+That's peculiar... You can have filenames longer than 14 characters, but only
+on some of the filesystems. Maybe you are using NFS. Anyway, to avoid problems
+I shall consider your system cannot support long filenames at all.
+EOM
+ val="$undef"
+ else
+ echo 'You can have filenames longer than 14 characters.' >&4
+ val="$define"
+ fi
+ else
+ $cat <<'EOM'
+How confusing! Some of your filesystems are sane enough to allow filenames
+longer than 14 characters but some others like /tmp can't even think about them.
+So, for now on, I shall assume your kernel does not allow them at all.
+EOM
+ val="$undef"
+ fi
+ fi
+else
+ $cat <<'EOM'
+You can't have filenames longer than 14 chars. You can't even think about them!
+EOM
+ val="$undef"
+fi
+set d_flexfnam
+eval $setvar
+$rm -rf /tmp/cf$$ 123456789abcde*
-The default should be fine for most people.
+: determine where library module manual pages go
+set man3dir man3dir none
+eval $prefixit
+$cat <<EOM
+
+$spackage has manual pages for many of the library modules.
+EOM
+
+case "$nroff" in
+nroff)
+ $cat <<'EOM'
+However, you don't have nroff, so they're probably useless to you.
+EOM
+ case "$man3dir" in
+ '') man3dir="none";;
+ esac;;
+esac
+case "$d_flexfnam" in
+undef)
+ $cat <<'EOM'
+However, your system can't handle the long file names like File::Basename.3.
EOM
-fn=d~+
-rp='Installation prefix to use for add-on modules and utilities?'
-: XXX Here might be another good place for an installstyle setting.
-case "$siteprefix" in
-'') dflt=$prefix ;;
-*) dflt=$siteprefix ;;
-esac
-. ./getfile
-oldsiteprefix=''
-case "$siteprefix" in
-'') ;;
-*)
- case "$ans" in
- "$prefix") ;;
- *) oldsiteprefix="$prefix";;
- esac
- ;;
+ case "$man3dir" in
+ '') man3dir="none";;
+ esac;;
esac
-siteprefix="$ans"
-siteprefixexp="$ansexp"
-: determine where site specific libraries go.
-: Usual default is /usr/local/lib/perl5/site_perl
-: The default "style" setting is made in installstyle.U
-: XXX No longer works with Prefixit stuff.
+echo "If you don't want the manual sources installed, answer 'none'."
prog=`echo $package | $sed 's/-*[0-9.]*$//'`
-case "$installstyle" in
-*lib/perl5*) dflt=$siteprefix/lib/site_$prog ;;
-*) dflt=$siteprefix/lib/site_$prog ;;
-esac
-$cat <<EOM
-
-The installation process will create a directory for
-site-specific extensions and modules. Most users find it convenient
-to place all site-specific files in this directory rather than in the
-main distribution directory.
+case "$man3dir" in
+'') dflt=`echo $man1dir | $sed -e 's/man1/man3/g' -e 's/man\.1/man\.3/g'`
+ if $test -d "$privlib/man/man3"; then
+ cat <<EOM >&4
+WARNING: Previous versions of perl installed man3 pages into
+$privlib/man/man3. This version will suggest a
+new default of $dflt.
EOM
-fn=d~+
-rp='Pathname for the site-specific library files?'
+ tdflt=$dflt
+ dflt='n'
+ rp='Do you wish to preserve the old behavior?(y/n)'
+ . ./myread
+ case "$ans" in
+ y*) dflt="$privlib/man/man3" ;;
+ *) dflt=$tdflt ;;
+ esac
+ fi
+ ;;
+' ') dflt=none;;
+*) dflt="$man3dir" ;;
+esac
+echo " "
+fn=dn+~
+rp="Where do the $package library man pages (source) go?"
. ./getfile
-sitelib="$ans"
-sitelibexp="$ansexp"
+man3dir="$ans"
+man3direxp="$ansexp"
+case "$man1dir" in
+'') man3dir=' '
+ installman3dir='';;
+esac
+
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installsitelib=`echo $sitelibexp | sed "s#^$prefix#$installprefix#"`
+ installman3dir=`echo $man3direxp | $sed "s#^$prefix#$installprefix#"`
else
- installsitelib="$sitelibexp"
+ installman3dir="$man3direxp"
fi
-: determine where site specific architecture-dependent libraries go.
-: sitelib default is /usr/local/lib/perl5/site_perl/
-: sitearch default is /usr/local/lib/perl5/site_perl/$apiversion/$archname
-: sitelib may have an optional trailing /share.
-tdflt=`echo $sitelib | $sed 's,/share$,,'`
-tdflt="$tdflt/$apiversion/$archname"
-set sitearch sitearch none
-eval $prefixit
-case "$sitearch" in
-'') dflt="$tdflt" ;;
-*) dflt="$sitearch" ;;
+: What suffix to use on installed man pages
+case "$man3dir" in
+' ')
+ man3ext='0'
+ ;;
+*)
+ rp="What suffix should be used for the $package library man pages?"
+ case "$man3ext" in
+ '') case "$man3dir" in
+ *3) dflt=3 ;;
+ *3p) dflt=3p ;;
+ *3pm) dflt=3pm ;;
+ *l) dflt=l;;
+ *n) dflt=n;;
+ *o) dflt=o;;
+ *p) dflt=p;;
+ *C) dflt=C;;
+ *L) dflt=L;;
+ *L3) dflt=L3;;
+ *) dflt=3;;
+ esac
+ ;;
+ *) dflt="$man3ext";;
+ esac
+ . ./myread
+ man3ext="$ans"
+ ;;
esac
-$cat <<EOM
-
-The installation process will also create a directory for
-architecture-dependent site-specific extensions and modules.
-EOM
-fn=nd~+
-rp='Pathname for the site-specific architecture-dependent library files?'
-. ./getfile
-sitearch="$ans"
-sitearchexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitearch=`echo $sitearchexp | sed "s#^$prefix#$installprefix#"`
-else
- installsitearch="$sitearchexp"
+: see if we have to deal with yellow pages, now NIS.
+if $test -d /usr/etc/yp || $test -d /etc/yp; then
+ if $test -f /usr/etc/nibindd; then
+ echo " "
+ echo "I'm fairly confident you're on a NeXT."
+ echo " "
+ rp='Do you get the hosts file via NetInfo?'
+ dflt=y
+ case "$hostcat" in
+ nidump*) ;;
+ '') ;;
+ *) dflt=n;;
+ esac
+ . ./myread
+ case "$ans" in
+ y*) hostcat='nidump hosts .';;
+ *) case "$hostcat" in
+ nidump*) hostcat='';;
+ esac
+ ;;
+ esac
+ fi
+ case "$hostcat" in
+ nidump*) ;;
+ *)
+ case "$hostcat" in
+ *ypcat*) dflt=y;;
+ '') if $contains '^\+' /etc/passwd >/dev/null 2>&1; then
+ dflt=y
+ else
+ dflt=n
+ fi;;
+ *) dflt=n;;
+ esac
+ echo " "
+ rp='Are you getting the hosts file via yellow pages?'
+ . ./myread
+ case "$ans" in
+ y*) hostcat='ypcat hosts';;
+ *) hostcat='cat /etc/hosts';;
+ esac
+ ;;
+ esac
fi
+case "$hostcat" in
+'') test -f /etc/hosts && hostcat='cat /etc/hosts';;
+esac
+case "$groupcat" in
+'') test -f /etc/group && groupcat='cat /etc/group';;
+esac
+case "$passcat" in
+'') test -f /etc/passwd && passcat='cat /etc/passwd';;
+esac
-: determine where add-on public executables go
-case "$sitebin" in
-'') dflt=$siteprefix/bin ;;
-*) dflt=$sitebin ;;
+: now get the host name
+echo " "
+echo "Figuring out host name..." >&4
+case "$myhostname" in
+'') cont=true
+ echo 'Maybe "hostname" will work...'
+ if tans=`sh -c hostname 2>&1` ; then
+ myhostname=$tans
+ phostname=hostname
+ cont=''
+ fi
+ ;;
+*) cont='';;
esac
-fn=d~
-rp='Pathname where the add-on public executables should be installed?'
-. ./getfile
-sitebin="$ans"
-sitebinexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitebin=`echo $sitebinexp | sed "s#^$prefix#$installprefix#"`
-else
- installsitebin="$sitebinexp"
+if $test "$cont"; then
+ if ./xenix; then
+ echo 'Oh, dear. Maybe "/etc/systemid" is the key...'
+ if tans=`cat /etc/systemid 2>&1` ; then
+ myhostname=$tans
+ phostname='cat /etc/systemid'
+ echo "Whadyaknow. Xenix always was a bit strange..."
+ cont=''
+ fi
+ elif $test -r /etc/systemid; then
+ echo "(What is a non-Xenix system doing with /etc/systemid?)"
+ fi
+fi
+if $test "$cont"; then
+ echo 'No, maybe "uuname -l" will work...'
+ if tans=`sh -c 'uuname -l' 2>&1` ; then
+ myhostname=$tans
+ phostname='uuname -l'
+ else
+ echo 'Strange. Maybe "uname -n" will work...'
+ if tans=`sh -c 'uname -n' 2>&1` ; then
+ myhostname=$tans
+ phostname='uname -n'
+ else
+ echo 'Oh well, maybe I can mine it out of whoami.h...'
+ if tans=`sh -c $contains' sysname $usrinc/whoami.h' 2>&1` ; then
+ myhostname=`echo "$tans" | $sed 's/^.*"\(.*\)"/\1/'`
+ phostname="sed -n -e '"'/sysname/s/^.*\"\\(.*\\)\"/\1/{'"' -e p -e q -e '}' <$usrinc/whoami.h"
+ else
+ case "$myhostname" in
+ '') echo "Does this machine have an identity crisis or something?"
+ phostname='';;
+ *)
+ echo "Well, you said $myhostname before..."
+ phostname='echo $myhostname';;
+ esac
+ fi
+ fi
+ fi
+fi
+: you do not want to know about this
+set $myhostname
+myhostname=$1
+
+: verify guess
+if $test "$myhostname" ; then
+ dflt=y
+ rp='Your host name appears to be "'$myhostname'".'" Right?"
+ . ./myread
+ case "$ans" in
+ y*) ;;
+ *) myhostname='';;
+ esac
fi
-cat <<EOM
-
-Perl can be built to take advantage of long doubles which
-(if available) may give more accuracy and range for floating point
-numbers. To do so, Configure must be run with -Duselongdouble.
-
-If this doesn't make any sense to you, just accept the default 'n'.
-EOM
-case "$uselongdouble" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-rp='Try to use long doubles if available?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
-esac
-set uselongdouble
-eval $setvar
+: bad guess or no guess
+while $test "X$myhostname" = X ; do
+ dflt=''
+ rp="Please type the (one word) name of your host:"
+ . ./myread
+ myhostname="$ans"
+done
-case "$uselongdouble" in
-"$define"|true|[yY]*)
-: Look for a hint-file generated 'call-back-unit'. If the
-: user has specified that long doubles should be used,
-: we may need to set or change some other defaults.
- if $test -f uselongdouble.cbu; then
- echo "Your platform has some specific hints for long doubles, using them..."
- . ./uselongdouble.cbu
- else
- $cat <<EOM
-(Your platform doesn't have any specific hints for long doubles.)
-EOM
- fi
+: translate upper to lower if necessary
+case "$myhostname" in
+*[A-Z]*)
+ echo "(Normalizing case in your host name)"
+ myhostname=`echo $myhostname | ./tr '[A-Z]' '[a-z]'`
;;
esac
-cat <<EOM
-
-Previous version of $package used the standard IO mechanisms as defined
-in <stdio.h>. Versions 5.003_02 and later of perl allow alternate IO
-mechanisms via a "PerlIO" abstraction, but the stdio mechanism is still
-the default. This abstraction layer can use AT&T's sfio (if you already
-have sfio installed) or regular stdio. Using PerlIO with sfio may cause
-problems with some extension modules. Using PerlIO with stdio is safe,
-but it is slower than plain stdio and therefore is not the default.
-
-If this doesn't make any sense to you, just accept the default 'n'.
-EOM
-case "$useperlio" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
+case "$myhostname" in
+*.*)
+ dflt=`expr "X$myhostname" : "X[^.]*\(\..*\)"`
+ myhostname=`expr "X$myhostname" : "X\([^.]*\)\."`
+ echo "(Trimming domain name from host name--host name is now $myhostname)"
+ ;;
+*) case "$mydomain" in
+ '')
+ {
+ test "X$hostcat" = "Xypcat hosts" &&
+ ypmatch "$myhostname" hosts 2>/dev/null |\
+ $sed -e 's/[ ]*#.*//; s/$/ /' > hosts && \
+ $test -s hosts
+ } || {
+ test "X$hostcat" != "X" &&
+ $hostcat | $sed -n -e "s/[ ]*#.*//; s/\$/ /
+ /[ ]$myhostname[ . ]/p" > hosts
+ }
+ tmp_re="[ . ]"
+ $test x`$awk "/[0-9].*[ ]$myhostname$tmp_re/ { sum++ }
+ END { print sum }" hosts` = x1 || tmp_re="[ ]"
+ dflt=.`$awk "/[0-9].*[ ]$myhostname$tmp_re/ {for(i=2; i<=NF;i++) print \\\$i}" \
+ hosts | $sort | $uniq | \
+ $sed -n -e "s/$myhostname\.\([-a-zA-Z0-9_.]\)/\1/p"`
+ case `$echo X$dflt` in
+ X*\ *) echo "(Several hosts in /etc/hosts matched hostname)"
+ dflt=.
+ ;;
+ X.) echo "(You do not have fully-qualified names in /etc/hosts)"
+ ;;
+ esac
+ case "$dflt" in
+ .)
+ tans=`./loc resolv.conf X /etc /usr/etc`
+ if $test -f "$tans"; then
+ echo "(Attempting domain name extraction from $tans)"
+ dflt=.`$sed -n -e 's/ / /g' \
+ -e 's/^search *\([^ ]*\).*/\1/p' $tans \
+ | ./tr '[A-Z]' '[a-z]' 2>/dev/null`
+ case "$dflt" in
+ .) dflt=.`$sed -n -e 's/ / /g' \
+ -e 's/^domain *\([^ ]*\).*/\1/p' $tans \
+ | ./tr '[A-Z]' '[a-z]' 2>/dev/null`
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ case "$dflt" in
+ .) echo "(No help from resolv.conf either -- attempting clever guess)"
+ dflt=.`sh -c domainname 2>/dev/null`
+ case "$dflt" in
+ '') dflt='.';;
+ .nis.*|.yp.*|.main.*) dflt=`echo $dflt | $sed -e 's/^\.[^.]*//'`;;
+ esac
+ ;;
+ esac
+ case "$dflt" in
+ .) echo "(Lost all hope -- silly guess then)"
+ dflt='.uucp'
+ ;;
+ esac
+ $rm -f hosts
+ ;;
+ *) dflt="$mydomain";;
+ esac;;
esac
-rp='Use the experimental PerlIO abstraction layer?'
+echo " "
+rp="What is your domain name?"
. ./myread
+tans="$ans"
case "$ans" in
-y|Y)
- val="$define"
- ;;
-*)
- echo "Ok, doing things the stdio way"
- val="$undef"
+'') ;;
+.*) ;;
+*) tans=".$tans";;
+esac
+mydomain="$tans"
+
+: translate upper to lower if necessary
+case "$mydomain" in
+*[A-Z]*)
+ echo "(Normalizing case in your domain name)"
+ mydomain=`echo $mydomain | ./tr '[A-Z]' '[a-z]'`
;;
esac
-set useperlio
-eval $setvar
-case "$vendorprefix" in
-'') d_vendorbin="$undef"
- vendorbin=''
- vendorbinexp=''
+: a little sanity check here
+case "$phostname" in
+'') ;;
+*)
+ case `$phostname | ./tr '[A-Z]' '[a-z]'` in
+ $myhostname$mydomain|$myhostname) ;;
+ *)
+ case "$phostname" in
+ sed*)
+ echo "(That doesn't agree with your whoami.h file, by the way.)"
+ ;;
+ *)
+ echo "(That doesn't agree with your $phostname command, by the way.)"
+ ;;
+ esac
;;
-*) d_vendorbin="$define"
- : determine where vendor-supplied executables go.
- dflt=$vendorprefix/bin
- fn=d~+
- rp='Pathname for the vendor-supplied executables directory?'
- . ./getfile
- vendorbin="$ans"
- vendorbinexp="$ansexp"
- : Change installation prefix, if necessary.
- if $test X"$prefix" != X"$installprefix"; then
- installvendorbin=`echo $vendorbinexp | $sed "s#^$prefix#$installprefix#"`
- else
- installvendorbin="$vendorbinexp"
- fi
+ esac
;;
esac
-: Check how to convert floats to strings.
-if test "X$d_Gconvert" = X; then
- echo " "
- echo "Checking for an efficient way to convert floats to strings."
- $cat >try.c <<'EOP'
-#ifdef TRY_gconvert
-#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
-char *myname = "gconvert";
-#endif
-#ifdef TRY_gcvt
-#define Gconvert(x,n,t,b) gcvt((x),(n),(b))
-char *myname = "gcvt";
-#endif
-#ifdef TRY_sprintf
-#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
-char *myname = "sprintf";
-#endif
+$cat <<EOM
-#include <stdio.h>
+I need to get your e-mail address in Internet format if possible, i.e.
+something like user@host.domain. Please answer accurately since I have
+no easy means to double check it. The default value provided below
+is most probably close to reality but may not be valid from outside
+your organization...
-int
-checkit(expect, got)
-char *expect;
-char *got;
-{
- if (strcmp(expect, got)) {
- printf("%s oddity: Expected %s, got %s\n",
- myname, expect, got);
- exit(1);
- }
-}
+EOM
+cont=x
+while test "$cont"; do
+ case "$cf_email" in
+ '') dflt="$cf_by@$myhostname$mydomain";;
+ *) dflt="$cf_email";;
+ esac
+ rp='What is your e-mail address?'
+ . ./myread
+ cf_email="$ans"
+ case "$cf_email" in
+ *@*.*) cont='' ;;
+ *)
+ rp='Address does not look like an Internet one. Use it anyway?'
+ case "$fastread" in
+ yes) dflt=y ;;
+ *) dflt=n ;;
+ esac
+ . ./myread
+ case "$ans" in
+ y*) cont='' ;;
+ *) echo " " ;;
+ esac
+ ;;
+ esac
+done
+
+$cat <<EOM
+
+If you or somebody else will be maintaining perl at your site, please
+fill in the correct e-mail address here so that they may be contacted
+if necessary. Currently, the "perlbug" program included with perl
+will send mail to this address in addition to perlbug@perl.com. You may
+enter "none" for no administrator.
+
+EOM
+case "$perladmin" in
+'') dflt="$cf_email";;
+*) dflt="$perladmin";;
+esac
+rp='Perl administrator e-mail address'
+. ./myread
+perladmin="$ans"
-int main()
-{
- char buf[64];
- buf[63] = '\0';
+: figure out how to guarantee perl startup
+case "$startperl" in
+'')
+ case "$sharpbang" in
+ *!)
+ $cat <<EOH
- /* This must be 1st test on (which?) platform */
- /* Alan Burlison <AlanBurlsin@unn.unisys.com> */
- Gconvert(0.1, 8, 0, buf);
- checkit("0.1", buf);
+I can use the #! construct to start perl on your system. This will
+make startup of perl scripts faster, but may cause problems if you
+want to share those scripts and perl is not in a standard place
+($binexp/perl) on all your platforms. The alternative is to force
+a shell by starting the script with a single ':' character.
- Gconvert(1.0, 8, 0, buf);
- checkit("1", buf);
+EOH
+ dflt="$binexp/perl"
+ rp='What shall I put after the #! to start up perl ("none" to not use #!)?'
+ . ./myread
+ case "$ans" in
+ none) startperl=": # use perl";;
+ *) startperl="#!$ans"
+ if $test 30 -lt `echo "$ans" | wc -c`; then
+ $cat >&4 <<EOM
- Gconvert(0.0, 8, 0, buf);
- checkit("0", buf);
+WARNING: Some systems limit the #! command to 32 characters.
+If you experience difficulty running Perl scripts with #!, try
+installing Perl in a directory with a shorter pathname.
- Gconvert(-1.0, 8, 0, buf);
- checkit("-1", buf);
+EOM
+ fi ;;
+ esac
+ ;;
+ *) startperl=": # use perl"
+ ;;
+ esac
+ ;;
+esac
+echo "I'll use $startperl to start perl scripts."
- /* Some Linux gcvt's give 1.e+5 here. */
- Gconvert(100000.0, 8, 0, buf);
- checkit("100000", buf);
-
- /* Some Linux gcvt's give -1.e+5 here. */
- Gconvert(-100000.0, 8, 0, buf);
- checkit("-100000", buf);
+: figure best path for perl in scripts
+case "$perlpath" in
+'')
+ perlpath="$binexp/perl"
+ case "$startperl" in
+ *!*) ;;
+ *)
+ $cat <<EOH
- exit(0);
-}
-EOP
- case "$d_Gconvert" in
- gconvert*) xxx_list='gconvert gcvt sprintf' ;;
- gcvt*) xxx_list='gcvt gconvert sprintf' ;;
- sprintf*) xxx_list='sprintf gconvert gcvt' ;;
- *) xxx_list='gconvert gcvt sprintf' ;;
- esac
+I will use the "eval 'exec'" idiom to start Perl on your system.
+I can use the full path of your Perl binary for this purpose, but
+doing so may cause problems if you want to share those scripts and
+Perl is not always in a standard place ($binexp/perl).
- for xxx_convert in $xxx_list; do
- echo "Trying $xxx_convert"
- $rm -f try try$_o
- set try -DTRY_$xxx_convert
- if eval $compile; then
- echo "$xxx_convert" found. >&4
- if ./try; then
- echo "I'll use $xxx_convert to convert floats into a string." >&4
- break;
- else
- echo "...But $xxx_convert didn't work as I expected."
- fi
- else
- echo "$xxx_convert NOT found." >&4
- fi
- done
-
- case "$xxx_convert" in
- gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
- gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
- *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
+EOH
+ dflt="$binexp/perl"
+ rp="What path shall I use in \"eval 'exec'\"?"
+ . ./myread
+ perlpath="$ans"
+ ;;
esac
-fi
+ ;;
+esac
+case "$startperl" in
+*!*) ;;
+*) echo "I'll use $perlpath in \"eval 'exec'\"" ;;
+esac
-: see if inttypes.h is available
-: we want a real compile instead of Inhdr because some systems
-: have an inttypes.h which includes non-existent headers
-echo " "
-$cat >try.c <<EOCP
-#include <inttypes.h>
-int main() {
- static int32_t foo32 = 0x12345678;
-}
-EOCP
-set try
-if eval $compile; then
- echo "<inttypes.h> found." >&4
- val="$define"
+: determine where public executable scripts go
+set scriptdir scriptdir
+eval $prefixit
+case "$scriptdir" in
+'')
+ dflt="$bin"
+ : guess some guesses
+ $test -d /usr/share/scripts && dflt=/usr/share/scripts
+ $test -d /usr/share/bin && dflt=/usr/share/bin
+ $test -d /usr/local/script && dflt=/usr/local/script
+ $test -d /usr/local/scripts && dflt=/usr/local/scripts
+ $test -d $prefixexp/script && dflt=$prefixexp/script
+ set dflt
+ eval $prefixup
+ ;;
+*) dflt="$scriptdir"
+ ;;
+esac
+$cat <<EOM
+
+Some installations have a separate directory just for executable scripts so
+that they can mount it across multiple architectures but keep the scripts in
+one spot. You might, for example, have a subdirectory of /usr/share for this.
+Or you might just lump your scripts in with all your other executables.
+
+EOM
+fn=d~
+rp='Where do you keep publicly executable scripts?'
+. ./getfile
+if $test "X$ansexp" != "X$scriptdirexp"; then
+ installscript=''
+fi
+scriptdir="$ans"
+scriptdirexp="$ansexp"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installscript=`echo $scriptdirexp | sed "s#^$prefix#$installprefix#"`
else
- echo "<inttypes.h> NOT found." >&4
- val="$undef"
+ installscript="$scriptdirexp"
fi
-$rm -f try.c try
-set i_inttypes
-eval $setvar
-: check for int64_t
-case "$use64bits" in
-"$define" )
- echo " "
- $echo $n "Checking to see if your system supports int64_t...$c" >&4
- $cat >try.c <<EOCP
-#include <sys/types.h>
-#$i_inttypes I_INTTYPES
-#ifdef I_INTTYPES
-#include <inttypes.h>
-#endif
-int64_t foo() { int64_t x; x = 7; return x; }
-EOCP
- if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define"
- echo " Yup, it does." >&4
- else
- val="$undef"
- echo " Nope, it doesn't." >&4
- fi
- $rm -f try.*
- ;;
-*) val="$undef"
- ;;
+: determine where site specific architecture-dependent libraries go.
+: sitelib default is /usr/local/lib/perl5/site_perl/$version
+: sitearch default is /usr/local/lib/perl5/site_perl/$version/$archname
+: sitelib may have an optional trailing /share.
+tdflt=`echo $sitelib | $sed 's,/share$,,'`
+tdflt="$tdflt/$archname"
+set sitearch sitearch none
+eval $prefixit
+case "$sitearch" in
+'') dflt="$tdflt" ;;
+*) dflt="$sitearch" ;;
esac
-set d_int64t
-eval $setvar
+$cat <<EOM
+The installation process will also create a directory for
+architecture-dependent site-specific extensions and modules.
-: check for lengths of integral types
-echo " "
-case "$intsize" in
-'')
- echo "Checking to see how big your integers are..." >&4
- $cat >intsize.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("intsize=%d;\n", sizeof(int));
- printf("longsize=%d;\n", sizeof(long));
- printf("shortsize=%d;\n", sizeof(short));
- exit(0);
-}
-EOCP
- set intsize
- if eval $compile_ok && ./intsize > /dev/null; then
- eval `./intsize`
- echo "Your integers are $intsize bytes long."
- echo "Your long integers are $longsize bytes long."
- echo "Your short integers are $shortsize bytes long."
- else
- $cat >&4 <<EOM
-!
-Help! I can't compile and run the intsize test program: please enlighten me!
-(This is probably a misconfiguration in your system or libraries, and
-you really ought to fix it. Still, I'll try anyway.)
-!
EOM
- dflt=4
- rp="What is the size of an integer (in bytes)?"
- . ./myread
- intsize="$ans"
- dflt=$intsize
- rp="What is the size of a long integer (in bytes)?"
- . ./myread
- longsize="$ans"
- dflt=2
- rp="What is the size of a short integer (in bytes)?"
- . ./myread
- shortsize="$ans"
- fi
- ;;
-esac
-$rm -f intsize intsize.*
+fn=nd~+
+rp='Pathname for the site-specific architecture-dependent library files?'
+. ./getfile
+sitearch="$ans"
+sitearchexp="$ansexp"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitearch=`echo $sitearchexp | sed "s#^$prefix#$installprefix#"`
+else
+ installsitearch="$sitearchexp"
+fi
-: check for long long
-echo " "
-$echo $n "Checking to see if your system supports long long...$c" >&4
-echo 'long long foo() { long long x; x = 7; return x; }' > try.c
-if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define"
- echo " Yup, it does." >&4
+: determine where add-on public executables go
+case "$sitebin" in
+'') dflt=$siteprefix/bin ;;
+*) dflt=$sitebin ;;
+esac
+fn=d~
+rp='Pathname where the add-on public executables should be installed?'
+. ./getfile
+sitebin="$ans"
+sitebinexp="$ansexp"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitebin=`echo $sitebinexp | sed "s#^$prefix#$installprefix#"`
else
- val="$undef"
- echo " Nope, it doesn't." >&4
+ installsitebin="$sitebinexp"
fi
-$rm try.*
-set d_longlong
+
+cat <<EOM
+
+Perl can be built to take advantage of long doubles which
+(if available) may give more accuracy and range for floating point numbers.
+
+If this doesn't make any sense to you, just accept the default 'n'.
+EOM
+
+case "$ccflags" in
+*-DUSE_LONG_DOUBLE*|*-DUSE_MORE_BITS*) uselongdouble="$define" ;;
+esac
+
+case "$uselongdouble" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+rp='Try to use long doubles if available?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set uselongdouble
eval $setvar
-: check for length of long long
-case "${d_longlong}${longlongsize}" in
+case "$uselongdouble" in
+true|[yY]*) uselongdouble="$define" ;;
+esac
+
+case "$uselongdouble" in
$define)
- echo " "
- $echo $n "Checking to see how big your long longs are...$c" >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", sizeof(long long));
-}
-EOCP
- set try
- if eval $compile_ok; then
- longlongsize=`./try`
- $echo " $longlongsize bytes." >&4
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that long doubles should be used,
+: we may need to set or change some other defaults.
+ if $test -f uselongdouble.cbu; then
+ echo "Your platform has some specific hints for long doubles, using them..."
+ . ./uselongdouble.cbu
else
- dflt='8'
- echo " "
- echo "(I can't seem to compile the test program. Guessing...)"
- rp="What is the size of a long long (in bytes)?"
- . ./myread
- longlongsize="$ans"
+ $cat <<EOM
+(Your platform doesn't have any specific hints for long doubles.)
+EOM
fi
- if $test "X$longsize" = "X$longlongsize"; then
- echo "(That isn't any different from an ordinary long.)"
- fi
;;
esac
-$rm -f try.c try
-echo " "
-
-if $test X"$intsize" = X8 -o X"$longsize" = X8 -o X"$d_int64t" = X"$define" -o X"$d_longlong" = X"$define"; then
-
-echo "Checking how to print 64-bit integers..." >&4
+cat <<EOM
-if $test X"$sPRId64" = X -a X"$intsize" = X8; then
- quad=int
- $cat >try.c <<'EOCP'
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- int q = 12345678901;
- printf("%ld\n", q);
-}
-EOCP
- set try
- if eval $compile; then
- yyy=`./try$exe_ext`
- case "$yyy" in
- 12345678901)
- sPRId64='"d"'; sPRIi64='"i"'; sPRIu64='"u"';
- sPRIo64='"o"'; sPRIx64='"x"'; sPRIX64='"X"';
- echo "We will use %d."
- ;;
- esac
- fi
-fi
+Perl can be built to take advantage of long longs which
+(if available) may give more range for integer numbers.
-if $test X"$sPRId64" = X -a X"$longsize" = X8; then
- quad=long
- $cat >try.c <<'EOCP'
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- long q = 12345678901;
- printf("%ld\n", q);
-}
-EOCP
- set try
- if eval $compile; then
- yyy=`./try$exe_ext`
- case "$yyy" in
- 12345678901)
- sPRId64='"ld"'; sPRIi64='"li"'; sPRIu64='"lu"';
- sPRIo64='"lo"'; sPRIx64='"lx"'; sPRIX64='"lX"';
- echo "We will use %ld."
- ;;
- esac
- fi
-fi
+If this doesn't make any sense to you, just accept the default 'n'.
+EOM
-if $test X"$sPRId64" = X -a X"$i_inttypes.h" = X"$define" -a X"$d_int64t" = X"$define"; then
- quad=int64_t
- $cat >try.c <<'EOCP'
-#include <sys/types.h>
-#include <inttypes.h>
-#include <stdio.h>
-int main() {
- int64_t q = 12345678901;
- printf("%" PRId64 "\n", q);
-}
-EOCP
- set try
- if eval $compile; then
- yyy=`./try$exe_ext`
- case "$yyy" in
- 12345678901)
- sPRId64=PRId64; sPRIi64=PRIi64; sPRIu64=PRIu64;
- sPRIo64=PRIo64; sPRIx64=PRIx64; sPRIX64=PRIX64;
- echo "We will use the C9X style."
- ;;
- esac
- fi
-fi
+case "$ccflags" in
+*-DUSE_LONG_LONG*) uselonglong="$define" ;;
+esac
-if $test X"$sPRId64" = X -a X"$d_longlong" = X"$define" -a X"$longlongsize" = X8; then
- quad="long long"
- $cat >try.c <<'EOCP'
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- long long q = 12345678901LL; /* AIX cc requires the LL prefix. */
- printf("%lld\n", q);
-}
-EOCP
- set try
- if eval $compile; then
- yyy=`./try$exe_ext`
- case "$yyy" in
- 12345678901)
- sPRId64='"lld"'; sPRIi64='"lli"'; sPRIu64='"llu"';
- sPRIo64='"llo"'; sPRIx64='"llx"'; sPRIX64='"llX"';
- echo "We will use the %lld style."
- ;;
- esac
- fi
-fi
+case "$uselonglong" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+rp='Try to use long longs if available?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set uselonglong
+eval $setvar
-if $test X"$sPRId64" = X -a X"$quad" != X; then
- $cat >try.c <<EOCP
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- $quad q = 12345678901;
- printf("%Ld\n", q);
-}
-EOCP
- set try
- if eval $compile; then
- yyy=`./try$exe_ext`
- case "$yyy" in
- 12345678901)
- sPRId64='"Ld"'; sPRIi64='"Li"'; sPRIu64='"Lu"';
- sPRIo64='"Lo"'; sPRIx64='"Lx"'; sPRIX64='"LX"';
- echo "We will use %lld."
- ;;
- esac
- fi
-fi
+case "$uselonglong" in
+true|[yY]*) uselonglong="$define" ;;
+esac
-if $test X"$sPRId64" = X -a X"$quad" != X; then
- $cat >try.c <<EOCP
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- $quad q = 12345678901;
- printf("%qd\n", q);
-}
-EOCP
- set try
- if eval $compile; then
- yyy=`./try$exe_ext`
- case "$yyy" in
- 12345678901)
- sPRId64='"qd"'; sPRIi64='"qi"'; sPRIu64='"qu"';
- sPRIo64='"qo"'; sPRIx64='"qx"'; sPRIX64='"qX"';
- echo "We will use %qd."
- ;;
- esac
+case "$uselonglong" in
+$define)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that long longs should be used,
+: we may need to set or change some other defaults.
+ if $test -f uselonglong.cbu; then
+ echo "Your platform has some specific hints for long longs, using them..."
+ . ./uselonglong.cbu
+ else
+ $cat <<EOM
+(Your platform doesn't have any specific hints for long longs.)
+EOM
fi
-fi
+ ;;
+esac
-if $test X"$sPRId64" = X; then
- echo "Cannot figure out how to print 64-bit integers." >&4
-fi
+cat <<EOM
-$rm -f try try.*
+Previous version of $package used the standard IO mechanisms as defined
+in <stdio.h>. Versions 5.003_02 and later of perl allow alternate IO
+mechanisms via a "PerlIO" abstraction, but the stdio mechanism is still
+the default. This abstraction layer can use AT&T's sfio (if you already
+have sfio installed) or regular stdio. Using PerlIO with sfio may cause
+problems with some extension modules. Using PerlIO with stdio is safe,
+but it is slower than plain stdio and therefore is not the default.
-fi # intsize -o longsize -o d_int64t -o d_longlong
+If this doesn't make any sense to you, just accept the default 'n'.
+EOM
+case "$useperlio" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+rp='Use the experimental PerlIO abstraction layer?'
+. ./myread
+case "$ans" in
+y|Y)
+ val="$define"
+ ;;
+*)
+ echo "Ok, doing things the stdio way"
+ val="$undef"
+ ;;
+esac
+set useperlio
+eval $setvar
-case "$sPRId64" in
-'') d_PRId64="$undef"; d_PRIi64="$undef"; d_PRIu64="$undef";
- d_PRIo64="$undef"; d_PRIx64="$undef"; d_PRIX64="$undef";
+case "$vendorprefix" in
+'') d_vendorbin="$undef"
+ vendorbin=''
+ vendorbinexp=''
;;
-*) d_PRId64="$define"; d_PRIi64="$define"; d_PRIu64="$define";
- d_PRIo64="$define"; d_PRIx64="$define"; d_PRIX64="$define";
+*) d_vendorbin="$define"
+ : determine where vendor-supplied executables go.
+ dflt=$vendorprefix/bin
+ fn=d~+
+ rp='Pathname for the vendor-supplied executables directory?'
+ . ./getfile
+ vendorbin="$ans"
+ vendorbinexp="$ansexp"
+ : Change installation prefix, if necessary.
+ if $test X"$prefix" != X"$installprefix"; then
+ installvendorbin=`echo $vendorbinexp | $sed "s#^$prefix#$installprefix#"`
+ else
+ installvendorbin="$vendorbinexp"
+ fi
;;
esac
#include <stdio.h>
int main()
{
- printf("%d\n", sizeof(double));
+ printf("%d\n", (int)sizeof(double));
+ exit(0);
}
EOCP
set try
: check for long doubles
echo " "
-$echo $n "Checking to see if your system supports long double...$c" >&4
-echo 'long double foo() { long double x; x = 7.0; return x; }' > try.c
-if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+$echo $n "Checking to see if your system supports long double..." $c >&4
+echo 'int main() { long double x = 7.0; }' > try.c
+set try
+if eval $compile; then
val="$define"
- echo " Yup, it does." >&4
+ echo " Yes, it does." >&4
else
val="$undef"
- echo " Nope, it doesn't." >&4
+ echo " No, it doesn't." >&4
fi
$rm try.*
set d_longdbl
case "${d_longdbl}${longdblsize}" in
$define)
echo " "
- $echo $n "Checking to see how big your long doubles are...$c" >&4
+ $echo $n "Checking to see how big your long doubles are..." $c >&4
$cat >try.c <<'EOCP'
#include <stdio.h>
int main()
}
EOCP
set try
+ set try
if eval $compile; then
- longdblsize=`./try`
+ longdblsize=`./try$exe_ext`
$echo " $longdblsize bytes." >&4
else
dflt='8'
fi
;;
esac
-$rm -f try.c try
+$rm -f try.* try
+
+: Check how to convert floats to strings.
+if test "X$d_Gconvert" = X; then
+ echo " "
+ echo "Checking for an efficient way to convert floats to strings."
+ $cat >try.c <<EOP
+#ifdef TRY_gconvert
+#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
+char *myname = "gconvert";
+#endif
+#ifdef TRY_gcvt
+#define Gconvert(x,n,t,b) gcvt((x),(n),(b))
+char *myname = "gcvt";
+#endif
+#ifdef TRY_qgcvt
+#define Gconvert(x,n,t,b) qgcvt((x),(n),(b))
+char *myname = "qgcvt";
+#define DOUBLETYPE long double
+#endif
+#ifdef TRY_sprintf
+#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
+char *myname = "sprintf";
+#endif
+
+#ifndef DOUBLETYPE
+#define DOUBLETYPE double
+#endif
+
+#include <stdio.h>
+
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+
+int
+checkit(expect, got)
+char *expect;
+char *got;
+{
+ if (strcmp(expect, got)) {
+ printf("%s oddity: Expected %s, got %s\n",
+ myname, expect, got);
+ exit(1);
+ }
+}
+
+int main()
+{
+ char buf[64];
+ buf[63] = '\0';
+
+ /* This must be 1st test on (which?) platform */
+ /* Alan Burlison <AlanBurlsin@unn.unisys.com> */
+ Gconvert((DOUBLETYPE)0.1, 8, 0, buf);
+ checkit("0.1", buf);
+
+ Gconvert((DOUBLETYPE)1.0, 8, 0, buf);
+ checkit("1", buf);
+
+ Gconvert((DOUBLETYPE)0.0, 8, 0, buf);
+ checkit("0", buf);
+
+ Gconvert((DOUBLETYPE)-1.0, 8, 0, buf);
+ checkit("-1", buf);
+
+ /* Some Linux gcvt's give 1.e+5 here. */
+ Gconvert((DOUBLETYPE)100000.0, 8, 0, buf);
+ checkit("100000", buf);
+
+ /* Some Linux gcvt's give -1.e+5 here. */
+ Gconvert((DOUBLETYPE)-100000.0, 8, 0, buf);
+ checkit("-100000", buf);
+
+ exit(0);
+}
+EOP
+ case "$d_Gconvert" in
+ gconvert*) xxx_list='gconvert gcvt sprintf' ;;
+ gcvt*) xxx_list='gcvt gconvert sprintf' ;;
+ sprintf*) xxx_list='sprintf gconvert gcvt' ;;
+ *) xxx_list='gconvert gcvt sprintf' ;;
+ esac
+
+ case "$d_longdbl$uselongdouble" in
+ definedefine) xxx_list="`echo $xxx_list|sed 's/gcvt/qgcvt gcvt/'`" ;;
+ esac
+
+ for xxx_convert in $xxx_list; do
+ echo "Trying $xxx_convert..."
+ $rm -f try try$_o
+ set try -DTRY_$xxx_convert
+ if eval $compile; then
+ echo "$xxx_convert() found." >&4
+ if ./try; then
+ echo "I'll use $xxx_convert to convert floats into a string." >&4
+ break;
+ else
+ echo "...But $xxx_convert didn't work as I expected."
+ fi
+ else
+ echo "$xxx_convert NOT found." >&4
+ fi
+ done
+
+ case "$xxx_convert" in
+ gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
+ gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
+ qgcvt) d_Gconvert='qgcvt((x),(n),(b))' ;;
+ *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
+ esac
+fi
echo " "
}
EOCP
set try
-if eval $compile_ok; then
- ./try
- castflags=$?
-else
- echo "(I can't seem to compile the test program--assuming it can't)"
- castflags=7
-fi
-case "$castflags" in
-0) val="$define"
- echo "Yup, it can."
- ;;
-*) val="$undef"
- echo "Nope, it can't."
- ;;
-esac
-set d_castneg
-eval $setvar
-$rm -f try.*
-
-: see if vprintf exists
-echo " "
-if set vprintf val -f d_vprintf; eval $csym; $val; then
- echo 'vprintf() found.' >&4
- val="$define"
- $cat >vprintf.c <<'EOF'
-#include <varargs.h>
-
-int main() { xxx("foo"); }
-
-xxx(va_alist)
-va_dcl
-{
- va_list args;
- char buf[10];
-
- va_start(args);
- exit((unsigned long)vsprintf(buf,"%s",args) > 10L);
-}
-EOF
- set vprintf
- if eval $compile && ./vprintf; then
- echo "Your vsprintf() returns (int)." >&4
- val2="$undef"
- else
- echo "Your vsprintf() returns (char*)." >&4
- val2="$define"
- fi
-else
- echo 'vprintf() NOT found.' >&4
- val="$undef"
- val2="$undef"
-fi
-set d_vprintf
-eval $setvar
-val=$val2
-set d_charvspr
-eval $setvar
-
-: see if chown exists
-set chown d_chown
-eval $inlibc
-
-: see if chroot exists
-set chroot d_chroot
-eval $inlibc
-
-: see if chsize exists
-set chsize d_chsize
-eval $inlibc
-
-hasfield='varname=$1; struct=$2; field=$3; shift; shift; shift;
-while $test $# -ge 2; do
- case "$1" in
- $define) echo "#include <$2>";;
- esac ;
- shift 2;
-done > try.c;
-echo "int main () { struct $struct foo; foo.$field = 0; }" >> try.c;
-if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define";
-else
- val="$undef";
-fi;
-set $varname;
-eval $setvar;
-$rm -f try.c try.o'
-
-: see if this is a sys/uio.h system
-set sys/uio.h i_sysuio
-eval $inhdr
-
-echo "Checking to see if your system supports struct iovec..." >&4
-set d_iovec_s iovec iov_base $i_sysuio sys/uio.h
-eval $hasfield
-case "$d_iovec_s" in
-"$define") echo "Yup, it does." >&4
- ;;
-*) echo "Nope, it doesn't." >&4
- ;;
-esac
-
-socketlib=''
-sockethdr=''
-: see whether socket exists
-echo " "
-$echo $n "Hmm... $c" >&4
-if set socket val -f d_socket; eval $csym; $val; then
- echo "Looks like you have Berkeley networking support." >&4
- d_socket="$define"
- if set setsockopt val -f; eval $csym; $val; then
- d_oldsock="$undef"
- else
- echo "...but it uses the old BSD 4.1c interface, rather than 4.2." >&4
- d_oldsock="$define"
- fi
-else
- if $contains socklib libc.list >/dev/null 2>&1; then
- echo "Looks like you have Berkeley networking support." >&4
- d_socket="$define"
- : we will have to assume that it supports the 4.2 BSD interface
- d_oldsock="$undef"
- else
- echo "You don't have Berkeley networking in libc$_a..." >&4
- if test "X$d_socket" = "X$define"; then
- echo "...but you seem to believe that you have sockets." >&4
- else
- for net in net socket
- do
- if test -f /usr/lib/lib$net$_a; then
- ( ($nm $nm_opt /usr/lib/lib$net$_a | eval $nm_extract) || \
- $ar t /usr/lib/lib$net$_a) 2>/dev/null >> libc.list
- if $contains socket libc.list >/dev/null 2>&1; then
- d_socket="$define"
- socketlib="-l$net"
- case "$net" in
- net)
- echo "...but the Wollongong group seems to have hacked it in." >&4
- sockethdr="-I/usr/netinclude"
- ;;
- esac
- echo "Found Berkeley sockets interface in lib$net." >& 4
- if $contains setsockopt libc.list >/dev/null 2>&1; then
- d_oldsock="$undef"
- else
- echo "...using the old BSD 4.1c interface, rather than 4.2." >&4
- d_oldsock="$define"
- fi
- break
- fi
- fi
- done
- if test "X$d_socket" != "X$define"; then
- echo "or anywhere else I see." >&4
- d_socket="$undef"
- d_oldsock="$undef"
- fi
- fi
- fi
+if eval $compile_ok; then
+ ./try
+ castflags=$?
+else
+ echo "(I can't seem to compile the test program--assuming it can't)"
+ castflags=7
fi
+case "$castflags" in
+0) val="$define"
+ echo "Yup, it can."
+ ;;
+*) val="$undef"
+ echo "Nope, it can't."
+ ;;
+esac
+set d_castneg
+eval $setvar
+$rm -f try.*
-: see if socketpair exists
-set socketpair d_sockpair
-eval $inlibc
+: see if vprintf exists
+echo " "
+if set vprintf val -f d_vprintf; eval $csym; $val; then
+ echo 'vprintf() found.' >&4
+ val="$define"
+ $cat >vprintf.c <<'EOF'
+#include <varargs.h>
+int main() { xxx("foo"); }
-echo " "
-echo "Checking the availability of certain socket constants..." >& 4
-for ENUM in MSG_CTRUNC MSG_DONTROUTE MSG_OOB MSG_PEEK MSG_PROXY SCM_RIGHTS; do
- enum=`$echo $ENUM|./tr '[A-Z]' '[a-z]'`
- $cat >try.c <<EOF
-#include <sys/types.h>
-#include <sys/socket.h>
-int main() {
- int i = $ENUM;
+xxx(va_alist)
+va_dcl
+{
+ va_list args;
+ char buf[10];
+
+ va_start(args);
+ exit((unsigned long)vsprintf(buf,"%s",args) > 10L);
}
EOF
- val="$undef"
- set try; if eval $compile; then
- val="$define"
+ set vprintf
+ if eval $compile && ./vprintf; then
+ echo "Your vsprintf() returns (int)." >&4
+ val2="$undef"
+ else
+ echo "Your vsprintf() returns (char*)." >&4
+ val2="$define"
fi
- set d_${enum}; eval $setvar
- $rm -f try.c try
-done
+else
+ echo 'vprintf() NOT found.' >&4
+ val="$undef"
+ val2="$undef"
+fi
+set d_vprintf
+eval $setvar
+val=$val2
+set d_charvspr
+eval $setvar
-set sendmsg d_sendmsg
+: see if chown exists
+set chown d_chown
eval $inlibc
-set recvmsg d_recvmsg
+: see if chroot exists
+set chroot d_chroot
eval $inlibc
-echo " "
-$echo $n "Checking to see if your system supports struct msghdr...$c" >&4
-set d_msghdr_s msghdr msg_name define sys/types.h $d_socket sys/socket.h $i_sysuio sys/uio.h
-eval $hasfield
-case "$d_msghdr_s" in
-"$define") echo "Yup, it does." >&4
- ;;
-*) echo "Nope, it doesn't." >&4
- ;;
-esac
-
-$echo $n "Checking to see if your system supports struct cmsghdr...$c" >&4
-set d_cmsghdr_s cmsghdr cmsg_len define sys/types.h $d_socket sys/socket.h $i_sysuio sys/uio.h
-eval $hasfield
-case "$d_cmsghdr_s" in
-"$define") echo "Yup, it does." >&4
- ;;
-*) echo "Nope, it doesn't." >&4
- ;;
-esac
+: see if chsize exists
+set chsize d_chsize
+eval $inlibc
: check for const keyword
echo " "
eval $setvar
$rm -f open3*
+: see which of string.h or strings.h is needed
+echo " "
+strings=`./findhdr string.h`
+if $test "$strings" && $test -r "$strings"; then
+ echo "Using <string.h> instead of <strings.h>." >&4
+ val="$define"
+else
+ val="$undef"
+ strings=`./findhdr strings.h`
+ if $test "$strings" && $test -r "$strings"; then
+ echo "Using <strings.h> instead of <string.h>." >&4
+ else
+ echo "No string header found -- You'll surely have problems." >&4
+ fi
+fi
+set i_string
+eval $setvar
+case "$i_string" in
+"$undef") strings=`./findhdr strings.h`;;
+*) strings=`./findhdr string.h`;;
+esac
+
: check for non-blocking I/O stuff
case "$h_sysfile" in
true) echo "#include <sys/file.h>" > head.c;;
'')
$cat head.c > try.c
$cat >>try.c <<'EOCP'
+#include <stdio.h>
int main() {
#ifdef O_NONBLOCK
printf("O_NONBLOCK\n");
#include <errno.h>
#include <sys/types.h>
#include <signal.h>
+#include <stdio.h>
#define MY_O_NONBLOCK $o_nonblock
#ifndef errno /* XXX need better Configure test */
extern int errno;
#endif
+#$i_unistd I_UNISTD
+#ifdef I_UNISTD
+#include <unistd.h>
+#endif
+#ifdef $i_string
+#include <string.h>
+#else
+#include <strings.h>
+#endif
$signal_t blech(x) int x; { exit(3); }
EOCP
$cat >> try.c <<'EOCP'
set fcntl d_fcntl
eval $inlibc
+hasfield='varname=$1; struct=$2; field=$3; shift; shift; shift;
+while $test $# -ge 2; do
+ case "$1" in
+ $define) echo "#include <$2>";;
+ esac ;
+ shift 2;
+done > try.c;
+echo "int main () { struct $struct foo; char* bar; bar = (char*)foo.$field; }" >> try.c;
+set try;
+if eval $compile; then
+ val="$define";
+else
+ val="$undef";
+fi;
+set $varname;
+eval $setvar;
+$rm -f try.c try.o'
+
+socketlib=''
+sockethdr=''
+: see whether socket exists
+echo " "
+$echo $n "Hmm... $c" >&4
+if set socket val -f d_socket; eval $csym; $val; then
+ echo "Looks like you have Berkeley networking support." >&4
+ d_socket="$define"
+ if set setsockopt val -f; eval $csym; $val; then
+ d_oldsock="$undef"
+ else
+ echo "...but it uses the old BSD 4.1c interface, rather than 4.2." >&4
+ d_oldsock="$define"
+ fi
+else
+ if $contains socklib libc.list >/dev/null 2>&1; then
+ echo "Looks like you have Berkeley networking support." >&4
+ d_socket="$define"
+ : we will have to assume that it supports the 4.2 BSD interface
+ d_oldsock="$undef"
+ else
+ echo "You don't have Berkeley networking in libc$_a..." >&4
+ if test "X$d_socket" = "X$define"; then
+ echo "...but you seem to believe that you have sockets." >&4
+ else
+ for net in net socket
+ do
+ if test -f /usr/lib/lib$net$_a; then
+ ( ($nm $nm_opt /usr/lib/lib$net$_a | eval $nm_extract) || \
+ $ar t /usr/lib/lib$net$_a) 2>/dev/null >> libc.list
+ if $contains socket libc.list >/dev/null 2>&1; then
+ d_socket="$define"
+ socketlib="-l$net"
+ case "$net" in
+ net)
+ echo "...but the Wollongong group seems to have hacked it in." >&4
+ sockethdr="-I/usr/netinclude"
+ ;;
+ esac
+ echo "Found Berkeley sockets interface in lib$net." >& 4
+ if $contains setsockopt libc.list >/dev/null 2>&1; then
+ d_oldsock="$undef"
+ else
+ echo "...using the old BSD 4.1c interface, rather than 4.2." >&4
+ d_oldsock="$define"
+ fi
+ break
+ fi
+ fi
+ done
+ if test "X$d_socket" != "X$define"; then
+ echo "or anywhere else I see." >&4
+ d_socket="$undef"
+ d_oldsock="$undef"
+ fi
+ fi
+ fi
+fi
+
+: see if socketpair exists
+set socketpair d_sockpair
+eval $inlibc
+
+
+echo " "
+echo "Checking the availability of certain socket constants..." >& 4
+for ENUM in MSG_CTRUNC MSG_DONTROUTE MSG_OOB MSG_PEEK MSG_PROXY SCM_RIGHTS; do
+ enum=`$echo $ENUM|./tr '[A-Z]' '[a-z]'`
+ $cat >try.c <<EOF
+#include <sys/types.h>
+#include <sys/socket.h>
+int main() {
+ int i = $ENUM;
+}
+EOF
+ val="$undef"
+ set try; if eval $compile; then
+ val="$define"
+ fi
+ set d_${enum}; eval $setvar
+ $rm -f try.c try
+done
+
: see if sys/select.h has to be included
set sys/select.h i_sysselct
eval $inhdr
eval $inlibc
-: see if llseek exists
-set llseek d_llseek
-eval $inlibc
-
: check for off64_t
echo " "
-$echo $n "Checking to see if your system supports off64_t...$c" >&4
+echo "Checking to see if your system supports off64_t..." >&4
$cat >try.c <<EOCP
#include <sys/types.h>
#include <unistd.h>
-off64_t foo() { off64_t x; x = 7; return x; }'
+int main() { off64_t x = 7; }'
EOCP
-if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+set try
+if eval $compile; then
val="$define"
- echo " Yup, it does." >&4
+ echo "Yes, it does."
else
val="$undef"
- echo " Nope, it doesn't." >&4
+ echo "No, it doesn't."
+ case "$lseeksize" in
+ 8) echo "(Your off_t is 64 bits, so you could use that.)" ;;
+ esac
fi
-$rm -f try.*
+$rm -f try.* try
set d_off64_t
eval $setvar
: check for fpos64_t
echo " "
-$echo $n "Checking to see if your system supports fpos64_t...$c" >&4
+echo "Checking to see if your system supports fpos64_t..." >&4
$cat >try.c <<EOCP
#include <sys/stdio.h>
-fpos64_t foo() { fpos64_t x; x = 7; return x; }'
+int main() { fpos64_t x x = 7; }'
EOCP
-if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+set try
+if eval $compile; then
val="$define"
- echo " Yup, it does." >&4
+ echo "Yes, it does."
else
val="$undef"
- echo " Nope, it doesn't." >&4
+ echo "No, it doesn't."
+ case "$fpossize" in
+ 8) echo "(Your fpos_t is 64 bits, so you could use that.)" ;;
+ esac
fi
-$rm -f try.*
+$rm -f try.* try
set d_fpos64_t
eval $setvar
-: see if fseeko exists
-set fseeko d_fseeko
-eval $inlibc
-
-: see if fsetpos exists
-set fsetpos d_fsetpos
-eval $inlibc
+hasstruct='varname=$1; struct=$2; shift; shift;
+while $test $# -ge 2; do
+ case "$1" in
+ $define) echo "#include <$2>";;
+ esac ;
+ shift 2;
+done > try.c;
+echo "int main () { struct $struct foo; }" >> try.c;
+set try;
+if eval $compile; then
+ val="$define";
+else
+ val="$undef";
+fi;
+set $varname;
+eval $setvar;
+$rm -f try.c try.o'
: see if this is a sys/param system
set sys/param.h i_sysparam
set sys/mount.h i_sysmount
eval $inhdr
+: see if sys/types.h has to be included
+set sys/types.h i_systypes
+eval $inhdr
+
+
+echo " "
+echo "Checking to see if your system supports struct fs_data..." >&4
+set d_fs_data_s fs_data $i_systypes sys/types.h $i_sysparam sys/param.h $i_sysmount sys/mount.h
+eval $hasstruct
+case "$d_fs_data_s" in
+"$define") echo "Yes, it does." ;;
+*) echo "No, it doesn't." ;;
+esac
+
+: see if fseeko exists
+set fseeko d_fseeko
+eval $inlibc
+case "$longsize" in
+8) echo "(Your long is 64 bits, so in a pinch you could use fseek.)" ;;
+esac
-: see if statfs exists
-set statfs d_statfs
+: see if fsetpos exists
+set fsetpos d_fsetpos
eval $inlibc
+
: see if fstatfs exists
set fstatfs d_fstatfs
eval $inlibc
-: see if statfs knows about mount flags
-set d_statfsflags statfs f_flags $i_sysparam sys/param.h $i_sysmount sys/mount.h
-eval $hasfield
-
: see if statvfs exists
set statvfs d_statvfs
: see if ftello exists
set ftello d_ftello
eval $inlibc
+case "$longsize" in
+8) echo "(Your long is 64 bits, so in a pinch you could use ftell.)" ;;
+esac
: see if getgrent exists
set getgrent d_getgrent
set getlogin d_getlogin
eval $inlibc
+: see if getmnt exists
+set getmnt d_getmnt
+eval $inlibc
+
: see if getmntent exists
set getmntent d_getmntent
eval $inlibc
set d_htonl
eval $setvar
-: see which of string.h or strings.h is needed
-echo " "
-strings=`./findhdr string.h`
-if $test "$strings" && $test -r "$strings"; then
- echo "Using <string.h> instead of <strings.h>." >&4
- val="$define"
-else
- val="$undef"
- strings=`./findhdr strings.h`
- if $test "$strings" && $test -r "$strings"; then
- echo "Using <strings.h> instead of <string.h>." >&4
- else
- echo "No string header found -- You'll surely have problems." >&4
- fi
-fi
-set i_string
-eval $setvar
-case "$i_string" in
-"$undef") strings=`./findhdr strings.h`;;
-*) strings=`./findhdr string.h`;;
-esac
-
: index or strchr
echo " "
if set index val -f; eval $csym; $val; then
set lockf d_lockf
eval $inlibc
+: check for long long
+echo " "
+$echo $n "Checking to see if your system supports long long..." $c >&4
+echo 'int main() { long long x = 7; return 0; }' > try.c
+set try
+if eval $compile; then
+ val="$define"
+ echo " Yes, it does." >&4
+else
+ val="$undef"
+ echo " No, it doesn't." >&4
+fi
+$rm try.*
+set d_longlong
+eval $setvar
+
+: check for length of long long
+case "${d_longlong}${longlongsize}" in
+$define)
+ echo " "
+ $echo $n "Checking to see how big your long longs are..." $c >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", (int)sizeof(long long));
+ return(0);
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ longlongsize=`./try$exe_ext`
+ $echo " $longlongsize bytes." >&4
+ else
+ dflt='8'
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of a long long (in bytes)?"
+ . ./myread
+ longlongsize="$ans"
+ fi
+ if $test "X$longsize" = "X$longlongsize"; then
+ echo "(That isn't any different from an ordinary long.)"
+ fi
+ ;;
+esac
+$rm -f try.* try
+
: see if lstat exists
set lstat d_lstat
eval $inlibc
-: see if madvise exists
-set madvise d_madvise
-eval $inlibc
-
: see if mblen exists
set mblen d_mblen
eval $inlibc
set mktime d_mktime
eval $inlibc
-: see if this is a sys/mman.h system
-set sys/mman.h i_sysmman
-eval $inhdr
-
-: see if mmap exists
-set mmap d_mmap
-eval $inlibc
-: see what shmat returns
-: default to something harmless
-mmaptype='void *'
-case "$i_sysmman$d_mmap" in
-"$define$define")
- $cat >mmap.c <<'END'
-#include <sys/mman.h>
-void *mmap();
-END
- if $cc $ccflags -c mmap.c >/dev/null 2>&1; then
- mmaptype='void *'
- else
- mmaptype='caddr_t'
- fi
- echo "and it returns ($mmaptype)." >&4
- ;;
-esac
-
-
-
-: see if mprotect exists
-set mprotect d_mprotect
-eval $inlibc
-
: see if msgctl exists
set msgctl d_msgctl
eval $inlibc
set d_msg
eval $setvar
-: see if msync exists
-set msync d_msync
-eval $inlibc
-
-: see if munmap exists
-set munmap d_munmap
-eval $inlibc
-
: see if nice exists
set nice d_nice
eval $inlibc
+: see if inttypes.h is available
+: we want a real compile instead of Inhdr because some systems
+: have an inttypes.h which includes non-existent headers
+echo " "
+$cat >try.c <<EOCP
+#include <inttypes.h>
+int main() {
+ static int32_t foo32 = 0x12345678;
+}
+EOCP
+set try
+if eval $compile; then
+ echo "<inttypes.h> found." >&4
+ val="$define"
+else
+ echo "<inttypes.h> NOT found." >&4
+ val="$undef"
+fi
+$rm -f try.c try
+set i_inttypes
+eval $setvar
+
+: check for int64_t
+echo " "
+$echo $n "Checking to see if your system supports int64_t...$c" >&4
+$cat >try.c <<EOCP
+#include <sys/types.h>
+#$i_inttypes I_INTTYPES
+#ifdef I_INTTYPES
+#include <inttypes.h>
+#endif
+int main() { int64_t x = 7; }
+EOCP
+set try
+if eval $compile; then
+ val="$define"
+ echo " Yes, it does." >&4
+else
+ val="$undef"
+ echo " No, it doesn't." >&4
+fi
+$rm -f try try.*
+set d_int64t
+eval $setvar
+
+
+echo " "
+echo "Checking which 64-bit integer type we could use..." >&4
+
+case "$intsize" in
+8) val=int
+ set quadtype
+ eval $setvar
+ val='"unsigned int"'
+ set uquadtype
+ eval $setvar
+ quadkind=1
+ ;;
+*) case "$longsize" in
+ 8) val=long
+ set quadtype
+ eval $setvar
+ val='"unsigned long"'
+ set uquadtype
+ eval $setvar
+ quadkind=2
+ ;;
+ *) case "$uselonglong:$d_longlong:$longlongsize" in
+ define:define:8)
+ val='"long long"'
+ set quadtype
+ eval $setvar
+ val='"unsigned long long"'
+ set uquadtype
+ eval $setvar
+ quadkind=3
+ ;;
+ *) case "$d_int64t" in
+ define)
+ val=int64_t
+ set quadtype
+ eval $setvar
+ val=uint64_t
+ set uquadtype
+ eval $setvar
+ quadkind=4
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
+case "$quadtype" in
+'') case "$uselonglong:$d_longlong:$longlongsize" in
+ undef:define:8)
+ echo "(You would have 'long long', but you are not using it.)" >&4 ;;
+ *) echo "Alas, no 64-bit integer types in sight." >&4 ;;
+ esac
+ d_quad="$undef"
+ ;;
+*) if test X"$use64bits" = Xdefine -o X"$longsize" = X8; then
+ verb="will"
+ else
+ verb="could"
+ fi
+ echo "We $verb use '$quadtype' for 64-bit integers." >&4
+ d_quad="$define"
+ ;;
+esac
+
+: check for length of character
+echo " "
+case "$charsize" in
+'')
+ echo "Checking to see how big your characters are (hey, you never know)..." >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", (int)sizeof(char));
+ exit(0);
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ dflt=`./try`
+ else
+ dflt='1'
+ echo "(I can't seem to compile the test program. Guessing...)"
+ fi
+ ;;
+*)
+ dflt="$charsize"
+ ;;
+esac
+rp="What is the size of a character (in bytes)?"
+. ./myread
+charsize="$ans"
+$rm -f try.c try
+
+
+echo " "
+$echo "Choosing the C types to be used for Perl's internal types..." >&4
+
+case "$use64bits:$d_quad:$quadtype" in
+define:define:?*)
+ ivtype="$quadtype"
+ uvtype="$uquadtype"
+ ivsize=8
+ uvsize=8
+ ;;
+*) ivtype="long"
+ uvtype="unsigned long"
+ ivsize=$longsize
+ uvsize=$longsize
+ ;;
+esac
+
+case "$uselongdouble:$d_longdbl" in
+define:define)
+ nvtype="long double"
+ nvsize=$longdblsize
+ ;;
+*) nvtype=double
+ nvsize=$doublesize
+ ;;
+esac
+
+$echo "(IV will be "$ivtype", $ivsize bytes)"
+$echo "(UV will be "$uvtype", $uvsize bytes)"
+$echo "(NV will be "$nvtype", $nvsize bytes)"
+
+$cat >try.c <<EOCP
+#$i_inttypes I_INTTYPES
+#ifdef I_INTTYPES
+#include <inttypes.h>
+#endif
+#include <stdio.h>
+int main() {
+#ifdef INT8
+ int8_t i = INT8_MAX;
+ uint8_t u = UINT8_MAX;
+ printf("int8_t\n");
+#endif
+#ifdef INT16
+ int16_t i = INT16_MAX;
+ uint16_t i = UINT16_MAX;
+ printf("int16_t\n");
+#endif
+#ifdef INT32
+ int32_t i = INT32_MAX;
+ uint32_t u = UINT32_MAX;
+ printf("int32_t\n");
+#endif
+}
+EOCP
+
+case "$i8type" in
+'') case "$charsize" in
+ 1) i8type=char
+ u8type="unsigned char"
+ i8size=$charsize
+ u8size=$charsize
+ ;;
+ esac
+ ;;
+esac
+case "$i8type" in
+'') set try -DINT8
+ if eval $compile; then
+ case "`./try$exe_ext`" in
+ int8_t) i8type=int8_t
+ u8type=uint8_t
+ i8size=1
+ u8size=1
+ ;;
+ esac
+ fi
+ ;;
+esac
+case "$i8type" in
+'') if $test $charsize -ge 1; then
+ i8type=char
+ u8type="unsigned char"
+ i8size=$charsize
+ u8size=$charsize
+ fi
+ ;;
+esac
+
+case "$i16type" in
+'') case "$shortsize" in
+ 2) i16type=short
+ u16type="unsigned short"
+ i16size=$shortsize
+ u16size=$shortsize
+ ;;
+ esac
+ ;;
+esac
+case "$i16type" in
+'') set try -DINT16
+ if eval $compile; then
+ case "`./try$exe_ext`" in
+ int16_t)
+ i16type=int16_t
+ u16type=uint16_t
+ i16size=2
+ u16size=2
+ ;;
+ esac
+ fi
+ ;;
+esac
+case "$i16type" in
+'') if $test $shortsize -ge 2; then
+ i16type=short
+ u16type="unsigned short"
+ i16size=$shortsize
+ u16size=$shortsize
+ fi
+ ;;
+esac
+
+case "$i32type" in
+'') case "$longsize" in
+ 4) i32type=long
+ u32type="unsigned long"
+ i32size=$longsize
+ u32size=$longsize
+ ;;
+ *) case "$intsize" in
+ 4) i32type=int
+ u32type="unsigned int"
+ i32size=$intsize
+ u32size=$intsize
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+case "$i32type" in
+'') set try -DINT32
+ if eval $compile; then
+ case "`./try$exe_ext`" in
+ int32_t)
+ i32type=int32_t
+ u32type=uint32_t
+ i32size=4
+ u32size=4
+ ;;
+ esac
+ fi
+ ;;
+esac
+case "$i32type" in
+'') if $test $intsize -ge 4; then
+ i32type=int
+ u32type="unsigned int"
+ i32size=$intsize
+ u32size=$intsize
+ fi
+ ;;
+esac
+
+case "$i64type" in
+'') case "$d_quad:$quadtype" in
+ define:?*)
+ i64type="$quadtype"
+ u64type="$uquadtype"
+ i64size=8
+ u64size=8
+ ;;
+ esac
+ ;;
+esac
+
+$echo "Checking whether your NVs can preserve your UVs..." >&4
+$cat <<EOP >try.c
+#include <stdio.h>
+int main() {
+ $uvtype k = ($uvtype)~0, l;
+ $nvtype d;
+ l = k;
+ d = ($nvtype)l;
+ l = ($uvtype)d;
+ if (l == k)
+ printf("preserve\n");
+ exit(0);
+}
+EOP
+set try
+if eval $compile; then
+ case "`./try$exe_ext`" in
+ preserve) d_nvpresuv="$define" ;;
+ esac
+fi
+case "$d_nvpresuv" in
+$define) $echo "Yes, they can." 2>&1 ;;
+*) $echo "No, they can't." 2>&1
+ d_nvpresuv="$undef"
+ ;;
+esac
+
+$rm -f try.* try
+
: see if POSIX threads are available
set pthread.h i_pthread
eval $inhdr
set readlink d_readlink
eval $inlibc
-: see if readv exists
-set readv d_readv
-eval $inlibc
-
: see if rename exists
set rename d_rename
eval $inlibc
struct sigaction act, oact;
act.sa_flags = 0;
oact.sa_handler = 0;
+ /* so that act and oact are used */
+ exit(act.sa_flags == 0 && oact.sa_handler == 0);
}
EOP
set try
set sys/stat.h i_sysstat
eval $inhdr
+
: see if stat knows about block sizes
echo " "
+echo "Checking to see if your struct stat has st_blocks field..." >&4
set d_statblks stat st_blocks $i_sysstat sys/stat.h
eval $hasfield
+
+: see if this is a sys/vfs.h system
+set sys/vfs.h i_sysvfs
+eval $inhdr
+
+
+: see if this is a sys/statfs.h system
+set sys/statfs.h i_sysstatfs
+eval $inhdr
+
+
+echo " "
+echo "Checking to see if your system supports struct statfs..." >&4
+set d_statfs_s statfs $i_systypes sys/types.h $i_sysparam sys/param.h $i_sysmount sys/mount.h $i_sysvfs sys/vfs.h $i_sysstatfs sys/statfs.h
+eval $hasstruct
+case "$d_statfs_s" in
+"$define") echo "Yes, it does." ;;
+*) echo "No, it doesn't." ;;
+esac
+
+
+
+: see if struct statfs knows about f_flags
+case "$d_statfs_s" in
+define)
+ echo " "
+ echo "Checking to see if your struct statfs has f_flags field..." >&4
+ set d_statfs_f_flags statfs f_flags $i_systypes sys/types.h $i_sysparam sys/param.h $i_sysmount sys/mount.h $i_sysvfs sys/vfs.h $i_sysstatfs sys/statfs.h
+ eval $hasfield
+ ;;
+*) val="$undef"
+ set d_statfs_f_flags
+ eval $setvar
+ ;;
+esac
+case "$d_statfs_f_flags" in
+"$define") echo "Yes, it does." ;;
+*) echo "No, it doesn't." ;;
+esac
+
: see if _ptr and _cnt from stdio act std
echo " "
if $contains '_IO_fpos_t' `./findhdr stdio.h` `./findhdr libio.h` >/dev/null 2>&1 ; then
set strtol d_strtol
eval $inlibc
+: see if strtold exists
+set strtold d_strtold
+eval $inlibc
+
+: see if strtoll exists
+set strtoll d_strtoll
+eval $inlibc
+
: see if strtoul exists
set strtoul d_strtoul
eval $inlibc
set strtoull d_strtoull
eval $inlibc
+: see if strtouq exists
+set strtouq d_strtouq
+eval $inlibc
+
: see if strxfrm exists
set strxfrm d_strxfrm
eval $inlibc
set tcsetpgrp d_tcsetpgrp
eval $inlibc
-: see if sys/types.h has to be included
-set sys/types.h i_systypes
-eval $inhdr
-
: see if prototype for telldir is available
echo " "
set d_telldirproto telldir $i_systypes sys/types.h $i_dirent dirent.h
eval $hasproto
-: define an is-a-typedef? function
-typedef='type=$1; var=$2; def=$3; shift; shift; shift; inclist=$@;
-case "$inclist" in
-"") inclist="sys/types.h";;
-esac;
-eval "varval=\$$var";
-case "$varval" in
-"")
- $rm -f temp.c;
- for inc in $inclist; do
- echo "#include <$inc>" >>temp.c;
- done;
- echo "#ifdef $type" >> temp.c;
- echo "printf(\"We have $type\");" >> temp.c;
- echo "#endif" >> temp.c;
- $cppstdin $cppflags $cppminus < temp.c >temp.E 2>/dev/null;
- if $contains $type temp.E >/dev/null 2>&1; then
- eval "$var=\$type";
- else
- eval "$var=\$def";
- fi;
- $rm -f temp.?;;
-*) eval "$var=\$varval";;
-esac'
-
-: define an is-a-typedef? function that prompts if the type is not available.
-typedef_ask='type=$1; var=$2; def=$3; shift; shift; shift; inclist=$@;
-case "$inclist" in
-"") inclist="sys/types.h";;
-esac;
-eval "varval=\$$var";
-case "$varval" in
-"")
- $rm -f temp.c;
- for inc in $inclist; do
- echo "#include <$inc>" >>temp.c;
- done;
- echo "#ifdef $type" >> temp.c;
- echo "printf(\"We have $type\");" >> temp.c;
- echo "#endif" >> temp.c;
- $cppstdin $cppflags $cppminus < temp.c >temp.E 2>/dev/null;
- echo " " ;
- echo "$rp" | $sed -e "s/What is/Looking for/" -e "s/?/./";
- if $contains $type temp.E >/dev/null 2>&1; then
- echo "$type found." >&4;
- eval "$var=\$type";
- else
- echo "$type NOT found." >&4;
- dflt="$def";
- . ./myread ;
- eval "$var=\$ans";
- fi;
- $rm -f temp.?;;
-*) eval "$var=\$varval";;
-esac'
-
: see if this is a sys/times.h system
set sys/times.h i_systimes
eval $inhdr
set umask d_umask
eval $inlibc
+: see if ustat exists
+set ustat d_ustat
+eval $inlibc
+
: backward compatibility for d_hvfork
if test X$d_hvfork != X; then
d_vfork="$d_hvfork"
set wctomb d_wctomb
eval $inlibc
-: see if writev exists
-set writev d_writev
-eval $inlibc
-
: preserve RCS keywords in files with variable substitution, grrr
Date='$Date'
Id='$Id'
case "$alignbytes" in
'') echo "Checking alignment constraints..." >&4
$cat >try.c <<'EOCP'
+#include <stdio.h>
struct foobar {
char foo;
double bar;
} try_algn;
int main()
{
- printf("%d\n", (char *)&try_algn.bar - (char *)&try_algn.foo);
+ printf("%d\n", (int)((char *)&try_algn.bar - (char *)&try_algn.foo));
+ return(0);
}
EOCP
set try
}
EOCP
set try
- if eval $compile && ./try; then
+ if eval $compile_ok && ./try; then
echo 'Looks OK.' >&4
else
echo "I can't use Berkeley DB with your <db.h>. I'll disable Berkeley DB." >&4
EOM
fflushall="$define"
;;
- '') $cat >&4 <<EOM
-Sigh. Flushing explicitly all the stdio streams doesn't work.
-EOM
- fflushall="$undef"
+ '') $cat >&4 <<EOM
+Sigh. Flushing explicitly all the stdio streams doesn't work.
+EOM
+ fflushall="$undef"
+ ;;
+ *) $cat >&4 <<EOM
+Cannot figure out whether flushing stdio streams explicitly works or not.
+I'm assuming it doesn't.
+EOM
+ fflushall="$undef"
+ ;;
+ esac
+ ;;
+ "$define"|true|[yY]*)
+ fflushall="$define"
+ ;;
+ *)
+ fflushall="$undef"
+ ;;
+ esac
+ ;;
+*) fflushall="$undef"
+ ;;
+esac
+case "$fflushNULL$fflushall" in
+undefundef)
+ $cat <<EOM
+I cannot figure out how to flush pending stdio output.
+EOM
+ ;;
+esac
+$rm -f try.* try$exe_ext
+
+: Store the full pathname to the ar program for use in the C program
+: Respect a hint or command line value for full_ar.
+case "$full_ar" in
+'') full_ar=$ar ;;
+esac
+
+: Store the full pathname to the sed program for use in the C program
+full_sed=$sed
+
+: see what type gids are declared as in the kernel
+echo " "
+echo "Looking for the type for group ids returned by getgid()."
+set gid_t gidtype xxx stdio.h sys/types.h
+eval $typedef
+case "$gidtype" in
+xxx)
+ xxx=`./findhdr sys/user.h`
+ set `grep 'groups\[NGROUPS\];' "$xxx" 2>/dev/null` unsigned short
+ case $1 in
+ unsigned) dflt="$1 $2" ;;
+ *) dflt="$1" ;;
+ esac
+ ;;
+*) dflt="$gidtype";;
+esac
+case "$gidtype" in
+gid_t) echo "gid_t found." ;;
+*) rp="What is the type for group ids returned by getgid()?"
+ . ./myread
+ gidtype="$ans"
+ ;;
+esac
+
+echo " "
+case "$gidtype" in
+*_t) zzz="$gidtype" ;;
+*) zzz="gid" ;;
+esac
+echo "Checking the size of $zzz..." >&4
+cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ printf("%d\n", (int)sizeof($gidtype));
+ exit(0);
+}
+EOCP
+set try
+if eval $compile_ok; then
+ yyy=`./try`
+ case "$yyy" in
+ '') gidsize=4
+ echo "(I can't execute the test program--guessing $gidsize.)" >&4
+ ;;
+ *) gidsize=$yyy
+ echo "Your $zzz size is $gidsize bytes."
+ ;;
+ esac
+else
+ gidsize=4
+ echo "(I can't compile the test program--guessing $gidsize.)" >&4
+fi
+
+
+echo " "
+case "$gidtype" in
+*_t) zzz="$gidtype" ;;
+*) zzz="gid" ;;
+esac
+echo "Checking the sign of $zzz..." >&4
+cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ $gidtype foo = -1;
+ if (foo < 0)
+ printf("-1\n");
+ else
+ printf("1\n");
+}
+EOCP
+set try
+if eval $compile; then
+ yyy=`./try`
+ case "$yyy" in
+ '') gidsign=1
+ echo "(I can't execute the test program--guessing unsigned.)" >&4
+ ;;
+ *) gidsign=$yyy
+ case "$gidsign" in
+ 1) echo "Your $zzz is unsigned." ;;
+ -1) echo "Your $zzz is signed." ;;
+ esac
+ ;;
+ esac
+else
+ gidsign=1
+ echo "(I can't compile the test program--guessing unsigned.)" >&4
+fi
+
+
+echo " "
+
+if $test X"$quadtype" != X; then
+
+echo "Checking how to print 64-bit integers..." >&4
+
+if $test X"$sPRId64" = X -a X"$quadtype" = Xint; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ int q = 12345678901;
+ printf("%ld\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64='"d"'; sPRIi64='"i"'; sPRIu64='"u"';
+ sPRIo64='"o"'; sPRIx64='"x"'; sPRIX64='"X"';
+ echo "We will use %d."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRId64" = X -a X"$quadtype" = Xlong; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long q = 12345678901;
+ printf("%ld\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64='"ld"'; sPRIi64='"li"'; sPRIu64='"lu"';
+ sPRIo64='"lo"'; sPRIx64='"lx"'; sPRIX64='"lX"';
+ echo "We will use %ld."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRId64" = X -a X"$i_inttypes.h" = X"$define" -a X"$quadtype" = Xint64_t; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <inttypes.h>
+#include <stdio.h>
+int main() {
+ int64_t q = 12345678901;
+ printf("%" PRId64 "\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64=PRId64; sPRIi64=PRIi64; sPRIu64=PRIu64;
+ sPRIo64=PRIo64; sPRIx64=PRIx64; sPRIX64=PRIX64;
+ echo "We will use the C9X style."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRId64" = X -a X"$quadtype" = X"long long"; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long long q = 12345678901LL; /* AIX cc requires the LL prefix. */
+ printf("%lld\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64='"lld"'; sPRIi64='"lli"'; sPRIu64='"llu"';
+ sPRIo64='"llo"'; sPRIx64='"llx"'; sPRIX64='"llX"';
+ echo "We will use the %lld style."
;;
- *) $cat >&4 <<EOM
-Cannot figure out whether flushing stdio streams explicitly works or not.
-I'm assuming it doesn't.
-EOM
- fflushall="$undef"
+ esac
+ fi
+fi
+
+if $test X"$sPRId64" = X -a X"$quadtype" != X; then
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ $quadtype q = 12345678901;
+ printf("%Ld\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64='"Ld"'; sPRIi64='"Li"'; sPRIu64='"Lu"';
+ sPRIo64='"Lo"'; sPRIx64='"Lx"'; sPRIX64='"LX"';
+ echo "We will use %Ld."
;;
esac
- ;;
- "$define"|true|[yY]*)
- fflushall="$define"
- ;;
- *)
- fflushall="$undef"
- ;;
- esac
- ;;
-*) fflushall="$undef"
+ fi
+fi
+
+if $test X"$sPRId64" = X -a X"$quadtype" != X; then
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ $quadtype q = 12345678901;
+ printf("%qd\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64='"qd"'; sPRIi64='"qi"'; sPRIu64='"qu"';
+ sPRIo64='"qo"'; sPRIx64='"qx"'; sPRIX64='"qX"';
+ echo "We will use %qd."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRId64" = X; then
+ echo "Cannot figure out how to print 64-bit integers." >&4
+fi
+
+$rm -f try try.*
+
+fi
+
+case "$sPRId64" in
+'') d_PRId64="$undef"; d_PRIi64="$undef"; d_PRIu64="$undef";
+ d_PRIo64="$undef"; d_PRIx64="$undef"; d_PRIX64="$undef";
;;
-esac
-case "$fflushNULL$fflushall" in
-undefundef)
- $cat <<EOM
-I cannot figure out how to flush pending stdio output.
-EOM
+*) d_PRId64="$define"; d_PRIi64="$define"; d_PRIu64="$define";
+ d_PRIo64="$define"; d_PRIx64="$define"; d_PRIX64="$define";
;;
esac
-$rm -f try.* try$exe_ext
-: see what type file positions are declared as in the library
-rp="What is the type for file position used by fsetpos()?"
-set fpos_t fpostype long stdio.h sys/types.h
-eval $typedef_ask
-: Store the full pathname to the ar program for use in the C program
-: Respect a hint or command line value for full_ar.
-case "$full_ar" in
-'') full_ar=$ar ;;
+echo " "
+$echo "Checking the format strings to be used for Perl's internal types..." >&4
+
+if $test X"$ivsize" = X8; then
+ ivdformat="$sPRId64"
+ uvuformat="$sPRIu64"
+ uvoformat="$sPRIo64"
+ uvxformat="$sPRIx64"
+else
+ if $test X"$ivsize" = X"$longsize"; then
+ ivdformat='"ld"'
+ uvuformat='"lu"'
+ uvoformat='"lo"'
+ uvxformat='"lx"'
+ else
+ if $test X"$ivsize" = X"$intsize"; then
+ ivdformat='"d"'
+ uvuformat='"u"'
+ uvoformat='"o"'
+ uvxformat='"x"'
+ else
+ : far out
+ if $test X"$ivsize" = X"$shortsize"; then
+ ivdformat='"hd"'
+ uvuformat='"hu"'
+ uvoformat='"ho"'
+ uvxformat='"hx"'
+ fi
+ fi
+ fi
+fi
+
+case "$ivdformat" in
+'') echo "$0: Fatal: failed to find format strings, cannot continue." >& 4
+ exit 1
+ ;;
esac
-: Store the full pathname to the sed program for use in the C program
-full_sed=$sed
-: see what type gids are declared as in the kernel
echo " "
-echo "Looking for the type for group ids returned by getgid()."
-set gid_t gidtype xxx stdio.h sys/types.h
-eval $typedef
-case "$gidtype" in
-xxx)
- xxx=`./findhdr sys/user.h`
- set `grep 'groups\[NGROUPS\];' "$xxx" 2>/dev/null` unsigned short
- case $1 in
- unsigned) dflt="$1 $2" ;;
- *) dflt="$1" ;;
- esac
+$echo "Checking the format string to be used for gids..." >&4
+
+case "$gidsign" in
+-1) if $test X"$gidsize" = X"$ivsize"; then
+ gidformat="$ivdformat"
+ else
+ if $test X"$gidsize" = X"$longsize"; then
+ gidformat='"ld"'
+ else
+ if $test X"$gidsize" = X"$intsize"; then
+ gidformat='"d"'
+ else
+ if $test X"$gidsize" = X"$shortsize"; then
+ gidformat='"hd"'
+ fi
+ fi
+ fi
+ fi
;;
-*) dflt="$gidtype";;
-esac
-case "$gidtype" in
-gid_t) echo "gid_t found." ;;
-*) rp="What is the type for group ids returned by getgid()?"
- . ./myread
- gidtype="$ans"
+*) if $test X"$gidsize" = X"$uvsize"; then
+ gidformat="$uvuformat"
+ else
+ if $test X"$gidsize" = X"$longsize"; then
+ gidformat='"lu"'
+ else
+ if $test X"$gidsize" = X"$intsize"; then
+ gidformat='"u"'
+ else
+ if $test X"$gidsize" = X"$shortsize"; then
+ gidformat='"hu"'
+ fi
+ fi
+ fi
+ fi
;;
esac
*) groupstype="$gidtype";;
esac
-: see what type lseek is declared as in the kernel
-rp="What is the type used for lseek's offset on this system?"
-set off_t lseektype long stdio.h sys/types.h
-eval $typedef_ask
-
-echo " "
-$echo $n "Checking to see how big your file offsets are...$c" >&4
-$cat >try.c <<EOCP
-#include <sys/types.h>
-#include <stdio.h>
-int main()
-{
- printf("%d\n", sizeof($lseektype));
-}
-EOCP
-set try
-if eval $compile_ok; then
- lseeksize=`./try`
- $echo " $lseeksize bytes." >&4
-else
- dflt='4'
- echo " "
- echo "(I can't seem to compile the test program. Guessing...)"
- rp="What is the size of your file offsets (in bytes)?"
- . ./myread
- lseeksize="$ans"
-fi
-$rm -f try.c try
-
echo " "
echo "Checking if your $make program sets \$(MAKE)..." >&4
case "$make_set_make" in
set pid_t pidtype int stdio.h sys/types.h
eval $typedef_ask
-: Find earliest binary compatible site_perl subdirectory perl can use.
-case "$bincompat5005" in
-"$define") xs_apiversion='5.005' ;;
-*) xs_apiversion=$apiversion ;; # The current site_perl version.
-esac
-: Find earliest pure perl site_perl subdirectory perl can use.
-: The versioned directories started at 5.005.
-pm_apiversion='5.005'
-
: check for length of pointer
echo " "
case "$ptrsize" in
#include <stdio.h>
int main()
{
- printf("%d\n", sizeof(VOID_PTR));
- exit(0);
+ printf("%d\n", (int)sizeof(VOID_PTR));
+ exit(0);
}
EOCP
set try
case "$selecttype" in
'') case "$d_select" in
$define)
+ echo " "
$cat <<EOM
Checking to see what type of arguments are accepted by select().
EOM
: Remove SIGSTKSIZE used by Linux.
: Remove SIGSTKSZ used by Posix.
: Remove SIGTYP void lines used by OS2.
-xxx=`echo '#include <signal.h>' |
+: Some cpps, like os390, dont give the file name anywhere
+if [ "X$fieldn" = X ]; then
+ : Just make some guesses. We check them later.
+ xxx='/usr/include/signal.h /usr/include/sys/signal.h'
+else
+ xxx=`echo '#include <signal.h>' |
$cppstdin $cppminus $cppflags 2>/dev/null |
$grep '^[ ]*#.*include' |
$awk "{print \\$$fieldn}" | $sed 's!"!!g' | $sort | $uniq`
+fi
: Check this list of files to be sure we have parsed the cpp output ok.
: This will also avoid potentially non-existent files, such
: as ../foo/bar.h
print substr($3, 4, 20)
}' $xxxfiles`
: Append some common names just in case the awk scan failed.
-xxx="$xxx ABRT ALRM BUS CHLD CLD CONT DIL EMT FPE HUP ILL INT IO IOT KILL"
-xxx="$xxx LOST PHONE PIPE POLL PROF PWR QUIT SEGV STKFLT STOP SYS TERM TRAP"
-xxx="$xxx TSTP TTIN TTOU URG USR1 USR2 USR3 USR4 VTALRM"
-xxx="$xxx WINCH WIND WINDOW XCPU XFSZ"
+xxx="$xxx ABRT ALRM BUS CANCEL CHLD CLD CONT DIL EMT FPE"
+xxx="$xxx FREEZE HUP ILL INT IO IOT KILL LOST LWP PHONE"
+xxx="$xxx PIPE POLL PROF PWR QUIT RTMAX RTMIN SEGV STKFLT STOP"
+xxx="$xxx SYS TERM THAW TRAP TSTP TTIN TTOU URG USR1 USR2"
+xxx="$xxx USR3 USR4 VTALRM WAITING WINCH WIND WINDOW XCPU XFSZ"
+
: generate a few handy files for later
$cat > signal.c <<'EOCP'
#include <sys/types.h>
}
END {
printf "#endif /* JUST_NSIG */\n";
- printf "}\n";
+ printf "exit(0);\n}\n";
}
' >>signal.c
$cat >signal.awk <<'EOP'
*_t) zzz="$uidtype" ;;
*) zzz="uid" ;;
esac
+echo "Checking the size of $zzz..." >&4
+cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ printf("%d\n", (int)sizeof($uidtype));
+ exit(0);
+}
+EOCP
+set try
+if eval $compile_ok; then
+ yyy=`./try`
+ case "$yyy" in
+ '') uidsize=4
+ echo "(I can't execute the test program--guessing $uidsize.)" >&4
+ ;;
+ *) uidsize=$yyy
+ echo "Your $zzz size is $uidsize bytes."
+ ;;
+ esac
+else
+ uidsize=4
+ echo "(I can't compile the test program--guessing $uidsize.)" >&4
+fi
+
+echo " "
+case "$uidtype" in
+*_t) zzz="$uidtype" ;;
+*) zzz="uid" ;;
+esac
echo "Checking the sign of $zzz..." >&4
cat > try.c <<EOCP
#include <sys/types.h>
fi
+
+echo " "
+$echo "Checking the format string to be used for uids..." >&4
+
+case "$uidsign" in
+-1) if $test X"$uidsize" = X"$ivsize"; then
+ uidformat="$ivdformat"
+ else
+ if $test X"$uidsize" = X"$longsize"; then
+ uidformat='"ld"'
+ else
+ if $test X"$uidsize" = X"$intsize"; then
+ uidformat='"d"'
+ else
+ if $test X"$uidsize" = X"$shortsize"; then
+ uidformat='"hd"'
+ fi
+ fi
+ fi
+ fi
+ ;;
+*) if $test X"$uidsize" = X"$uvsize"; then
+ uidformat="$uvuformat"
+ else
+ if $test X"$uidsize" = X"$longsize"; then
+ uidformat='"lu"'
+ else
+ if $test X"$uidsize" = X"$intsize"; then
+ uidformat='"u"'
+ else
+ if $test X"$uidsize" = X"$shortsize"; then
+ uidformat='"hu"'
+ fi
+ fi
+ fi
+ fi
+ ;;
+esac
+
: see if dbm.h is available
: see if dbmclose exists
set dbmclose d_dbmclose
set sys/statvfs.h i_sysstatvfs
eval $inhdr
+: see if this is a sys/uio.h system
+set sys/uio.h i_sysuio
+eval $inhdr
+
: see if this is a sys/un.h system
set sys/un.h i_sysun
eval $inhdr
set sys/wait.h i_syswait
eval $inhdr
+: see if this is a ustat.h system
+set ustat.h i_ustat
+eval $inhdr
+
: see if this is an utime system
set utime.h i_utime
eval $inhdr
alignbytes='$alignbytes'
ansi2knr='$ansi2knr'
aphostname='$aphostname'
-apiversion='$apiversion'
+api_revision='$api_revision'
+api_subversion='$api_subversion'
+api_version='$api_version'
+api_versionstring='$api_versionstring'
ar='$ar'
archlib='$archlib'
archlibexp='$archlibexp'
cf_by='$cf_by'
cf_email='$cf_email'
cf_time='$cf_time'
+charsize='$charsize'
chgrp='$chgrp'
chmod='$chmod'
chown='$chown'
d_chroot='$d_chroot'
d_chsize='$d_chsize'
d_closedir='$d_closedir'
-d_cmsghdr_s='$d_cmsghdr_s'
d_const='$d_const'
d_crypt='$d_crypt'
d_csh='$d_csh'
d_fork='$d_fork'
d_fpathconf='$d_fpathconf'
d_fpos64_t='$d_fpos64_t'
+d_fs_data_s='$d_fs_data_s'
d_fseeko='$d_fseeko'
d_fsetpos='$d_fsetpos'
d_fstatfs='$d_fstatfs'
d_gethname='$d_gethname'
d_gethostprotos='$d_gethostprotos'
d_getlogin='$d_getlogin'
+d_getmnt='$d_getmnt'
d_getmntent='$d_getmntent'
d_getnbyaddr='$d_getnbyaddr'
d_getnbyname='$d_getnbyname'
d_index='$d_index'
d_inetaton='$d_inetaton'
d_int64t='$d_int64t'
-d_iovec_s='$d_iovec_s'
d_isascii='$d_isascii'
d_killpg='$d_killpg'
d_lchown='$d_lchown'
d_ldbl_dig='$d_ldbl_dig'
d_link='$d_link'
-d_llseek='$d_llseek'
d_locconv='$d_locconv'
d_lockf='$d_lockf'
d_longdbl='$d_longdbl'
d_longlong='$d_longlong'
d_lstat='$d_lstat'
-d_madvise='$d_madvise'
d_mblen='$d_mblen'
d_mbstowcs='$d_mbstowcs'
d_mbtowc='$d_mbtowc'
d_mkdir='$d_mkdir'
d_mkfifo='$d_mkfifo'
d_mktime='$d_mktime'
-d_mmap='$d_mmap'
-d_mprotect='$d_mprotect'
d_msg='$d_msg'
d_msg_ctrunc='$d_msg_ctrunc'
d_msg_dontroute='$d_msg_dontroute'
d_msg_proxy='$d_msg_proxy'
d_msgctl='$d_msgctl'
d_msgget='$d_msgget'
-d_msghdr_s='$d_msghdr_s'
d_msgrcv='$d_msgrcv'
d_msgsnd='$d_msgsnd'
-d_msync='$d_msync'
-d_munmap='$d_munmap'
d_mymalloc='$d_mymalloc'
d_nice='$d_nice'
+d_nvpresuv='$d_nvpresuv'
d_off64_t='$d_off64_t'
d_old_pthread_create_joinable='$d_old_pthread_create_joinable'
d_oldpthreads='$d_oldpthreads'
d_pwgecos='$d_pwgecos'
d_pwpasswd='$d_pwpasswd'
d_pwquota='$d_pwquota'
+d_quad='$d_quad'
d_readdir='$d_readdir'
d_readlink='$d_readlink'
-d_readv='$d_readv'
-d_recvmsg='$d_recvmsg'
d_rename='$d_rename'
d_rewinddir='$d_rewinddir'
d_rmdir='$d_rmdir'
d_semctl_semun='$d_semctl_semun'
d_semget='$d_semget'
d_semop='$d_semop'
-d_sendmsg='$d_sendmsg'
d_setegid='$d_setegid'
d_seteuid='$d_seteuid'
d_setgrent='$d_setgrent'
d_sockpair='$d_sockpair'
d_sqrtl='$d_sqrtl'
d_statblks='$d_statblks'
-d_statfs='$d_statfs'
-d_statfsflags='$d_statfsflags'
+d_statfs_f_flags='$d_statfs_f_flags'
+d_statfs_s='$d_statfs_s'
d_statvfs='$d_statvfs'
d_stdio_cnt_lval='$d_stdio_cnt_lval'
d_stdio_ptr_lval='$d_stdio_ptr_lval'
d_strerror='$d_strerror'
d_strtod='$d_strtod'
d_strtol='$d_strtol'
+d_strtold='$d_strtold'
+d_strtoll='$d_strtoll'
d_strtoul='$d_strtoul'
d_strtoull='$d_strtoull'
+d_strtouq='$d_strtouq'
d_strxfrm='$d_strxfrm'
d_suidsafe='$d_suidsafe'
d_symlink='$d_symlink'
d_umask='$d_umask'
d_uname='$d_uname'
d_union_semun='$d_union_semun'
+d_ustat='$d_ustat'
d_vendorbin='$d_vendorbin'
d_vendorlib='$d_vendorlib'
d_vfork='$d_vfork'
d_waitpid='$d_waitpid'
d_wcstombs='$d_wcstombs'
d_wctomb='$d_wctomb'
-d_writev='$d_writev'
d_xenix='$d_xenix'
date='$date'
db_hashtype='$db_hashtype'
find='$find'
firstmakefile='$firstmakefile'
flex='$flex'
+fpossize='$fpossize'
fpostype='$fpostype'
freetype='$freetype'
full_ar='$full_ar'
full_csh='$full_csh'
full_sed='$full_sed'
gccversion='$gccversion'
+gidformat='$gidformat'
+gidsign='$gidsign'
+gidsize='$gidsize'
gidtype='$gidtype'
glibpth='$glibpth'
grep='$grep'
hint='$hint'
hostcat='$hostcat'
huge='$huge'
+i16size='$i16size'
+i16type='$i16type'
+i32size='$i32size'
+i32type='$i32type'
+i64size='$i64size'
+i64type='$i64type'
+i8size='$i8size'
+i8type='$i8type'
i_arpainet='$i_arpainet'
i_bsdioctl='$i_bsdioctl'
i_db='$i_db'
i_sysfilio='$i_sysfilio'
i_sysin='$i_sysin'
i_sysioctl='$i_sysioctl'
-i_sysmman='$i_sysmman'
i_sysmount='$i_sysmount'
i_sysndir='$i_sysndir'
i_sysparam='$i_sysparam'
i_sysselct='$i_sysselct'
i_syssockio='$i_syssockio'
i_sysstat='$i_sysstat'
+i_sysstatfs='$i_sysstatfs'
i_sysstatvfs='$i_sysstatvfs'
i_systime='$i_systime'
i_systimek='$i_systimek'
i_systypes='$i_systypes'
i_sysuio='$i_sysuio'
i_sysun='$i_sysun'
+i_sysvfs='$i_sysvfs'
i_syswait='$i_syswait'
i_termio='$i_termio'
i_termios='$i_termios'
i_time='$i_time'
i_unistd='$i_unistd'
+i_ustat='$i_ustat'
i_utime='$i_utime'
i_values='$i_values'
i_varargs='$i_varargs'
i_varhdr='$i_varhdr'
i_vfork='$i_vfork'
ignore_versioned_solibs='$ignore_versioned_solibs'
+inc_version_list='$inc_version_list'
+inc_version_list_init='$inc_version_list_init'
incpath='$incpath'
inews='$inews'
installarchlib='$installarchlib'
installvendorbin='$installvendorbin'
installvendorlib='$installvendorlib'
intsize='$intsize'
+ivdformat='$ivdformat'
+ivsize='$ivsize'
+ivtype='$ivtype'
known_extensions='$known_extensions'
ksh='$ksh'
large='$large'
man3direxp='$man3direxp'
man3ext='$man3ext'
medium='$medium'
-mips='$mips'
mips_type='$mips_type'
mkdir='$mkdir'
-mmaptype='$mmaptype'
models='$models'
modetype='$modetype'
more='$more'
nm_so_opt='$nm_so_opt'
nonxs_ext='$nonxs_ext'
nroff='$nroff'
+nvsize='$nvsize'
+nvtype='$nvtype'
o_nonblock='$o_nonblock'
obj_ext='$obj_ext'
old_pthread_create_joinable='$old_pthread_create_joinable'
phostname='$phostname'
pidtype='$pidtype'
plibpth='$plibpth'
-pm_apiversion='$pm_apiversion'
pmake='$pmake'
pr='$pr'
prefix='$prefix'
privlibexp='$privlibexp'
prototype='$prototype'
ptrsize='$ptrsize'
+quadkind='$quadkind'
+quadtype='$quadtype'
randbits='$randbits'
randfunc='$randfunc'
randseedtype='$randseedtype'
tr='$tr'
trnl='$trnl'
troff='$troff'
+u16size='$u16size'
+u16type='$u16type'
+u32size='$u32size'
+u32type='$u32type'
+u64size='$u64size'
+u64type='$u64type'
+u8size='$u8size'
+u8type='$u8type'
+uidformat='$uidformat'
uidsign='$uidsign'
+uidsize='$uidsize'
uidtype='$uidtype'
uname='$uname'
uniq='$uniq'
+uquadtype='$uquadtype'
+use5005threads='$use5005threads'
use64bits='$use64bits'
usedl='$usedl'
+useithreads='$useithreads'
uselargefiles='$uselargefiles'
uselongdouble='$uselongdouble'
+uselonglong='$uselonglong'
usemorebits='$usemorebits'
usemultiplicity='$usemultiplicity'
usemymalloc='$usemymalloc'
usevfork='$usevfork'
usrinc='$usrinc'
uuname='$uuname'
+uvoformat='$uvoformat'
+uvsize='$uvsize'
+uvtype='$uvtype'
+uvuformat='$uvuformat'
+uvxformat='$uvxformat'
vendorbin='$vendorbin'
vendorbinexp='$vendorbinexp'
vendorlib='$vendorlib'
vi='$vi'
voidflags='$voidflags'
xlibpth='$xlibpth'
-xs_apiversion='$xs_apiversion'
zcat='$zcat'
zip='$zip'
EOT