# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Wed Mar 22 19:13:31 EET 2000 [metaconfig 3.0 PL70]
-# (with additional metaconfig patches by perlbug@perl.com)
+# Generated on Sat Oct 14 17:18:06 EET DST 2000 [metaconfig 3.0 PL70]
+# (with additional metaconfig patches by perlbug@perl.org)
cat >/tmp/c1$$ <<EOF
ARGGGHHHH!!!!!
test -d UU || mkdir UU
cd UU && rm -f ./*
+ccname=''
+ccversion=''
ccsymbols=''
cppccsymbols=''
cppsymbols=''
+perllibs=''
dynamic_ext=''
extensions=''
known_extensions=''
d_bincompat5005=''
byteorder=''
cc=''
-gccversion=''
ccflags=''
cppflags=''
ldflags=''
d_endpent=''
d_endpwent=''
d_endsent=''
-d_endspent=''
d_fchmod=''
d_fchown=''
d_fcntl=''
d_flock=''
d_fork=''
d_fpos64_t=''
+d_frexpl=''
d_fs_data_s=''
d_fseeko=''
d_fsetpos=''
d_gettimeod=''
d_Gconvert=''
d_getcwd=''
+d_getespwnam=''
d_getfsstat=''
d_getgrent=''
d_getgrps=''
d_getpbyname=''
d_getpbynumber=''
d_getprotoprotos=''
+d_getprpwnam=''
d_getpwent=''
d_getsent=''
d_getservprotos=''
-d_getspent=''
d_getspnam=''
d_getsbyname=''
d_getsbyport=''
d_inetaton=''
d_int64_t=''
d_isascii=''
+d_isnan=''
+d_isnanl=''
d_killpg=''
d_lchown=''
d_ldbl_dig=''
d_mktime=''
d_mmap=''
mmaptype=''
+d_modfl=''
d_mprotect=''
d_msg=''
d_msgctl=''
d_bsdsetpgrp=''
d_setpgrp=''
d_setprior=''
+d_setproctitle=''
d_setpwent=''
d_setregid=''
d_setresgid=''
d_setruid=''
d_setsent=''
d_setsid=''
-d_setspent=''
d_setvbuf=''
d_sfio=''
usesfio=''
sockethdr=''
socketlib=''
d_socklen_t=''
+d_socks5_init=''
d_sqrtl=''
d_statblks=''
d_statfs_f_flags=''
fflushall=''
fpossize=''
fpostype=''
+gccosandvers=''
+gccversion=''
gidformat=''
gidsign=''
gidsize=''
i_iconv=''
i_ieeefp=''
i_inttypes=''
+i_libutil=''
i_limits=''
i_locale=''
i_machcthr=''
i_niin=''
i_sysin=''
i_poll=''
+i_prot=''
i_pthread=''
d_pwage=''
d_pwchange=''
libsfound=''
libspath=''
lns=''
-d_PRIEldbl=''
-d_PRIFldbl=''
-d_PRIGldbl=''
+d_PRIEUldbl=''
+d_PRIFUldbl=''
+d_PRIGUldbl=''
d_PRIeldbl=''
d_PRIfldbl=''
d_PRIgldbl=''
-sPRIEldbl=''
-sPRIFldbl=''
-sPRIGldbl=''
+d_SCNfldbl=''
+sPRIEUldbl=''
+sPRIFUldbl=''
+sPRIGUldbl=''
sPRIeldbl=''
sPRIfldbl=''
sPRIgldbl=''
+sSCNfldbl=''
lseeksize=''
lseektype=''
make_set_make=''
man3dir=''
man3direxp=''
man3ext=''
-huge=''
-large=''
-medium=''
-models=''
-small=''
-split=''
modetype=''
multiarch=''
mydomain=''
passcat=''
orderlib=''
ranlib=''
+d_perl_otherlibdirs=''
+otherlibdirs=''
package=''
spackage=''
pager=''
perladmin=''
perlpath=''
d_nv_preserves_uv=''
+d_nv_preserves_uv_bits=''
i16size=''
i16type=''
i32size=''
uvsize=''
uvtype=''
ivdformat=''
+nvEUformat=''
+nvFUformat=''
+nvGUformat=''
+nveformat=''
+nvfformat=''
+nvgformat=''
+uvXUformat=''
uvoformat=''
uvuformat=''
uvxformat=''
privlibexp=''
prototype=''
ptrsize=''
-d_PRIX64=''
+d_PRIXU64=''
d_PRId64=''
d_PRIi64=''
d_PRIo64=''
d_PRIu64=''
d_PRIx64=''
-sPRIX64=''
+sPRIXU64=''
sPRId64=''
sPRIi64=''
sPRIo64=''
archname64=''
use64bitall=''
use64bitint=''
+ccflags_uselargefiles=''
+ldflags_uselargefiles=''
+libswanted_uselargefiles=''
uselargefiles=''
uselongdouble=''
usemorebits=''
usevendorprefix=''
vendorprefix=''
vendorprefixexp=''
+versiononly=''
defvoidused=''
voidflags=''
pm_apiversion=''
fi
i_whoami=''
+ccname=''
+ccversion=''
+perllibs=''
: set useposix=false in your hint file to disable the POSIX extension.
useposix=true
: set useopcode=false in your hint file to disable the Opcode extension.
_exe=''
: Extra object files, if any, needed on this platform.
archobjs=''
+archname=''
: Possible local include directories to search.
: Set locincpth to "" in a hint file to defeat local include searches.
locincpth="/usr/local/include /opt/local/include /usr/gnu/include"
loclibpth="$loclibpth /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib"
: general looking path for locating libraries
-glibpth="/usr/lib/large /lib /usr/lib $xlibpth"
-glibpth="$glibpth /lib/large /usr/lib/small /lib/small"
+glibpth="/lib /usr/lib $xlibpth"
glibpth="$glibpth /usr/ccs/lib /usr/ucblib /usr/local/lib"
test -f /usr/shlib/libc.so && glibpth="/usr/shlib $glibpth"
test -f /shlib/libc.so && glibpth="/shlib $glibpth"
libswanted=''
: some systems want to use only the non-versioned libso:s
ignore_versioned_solibs=''
+archname64=''
+ccflags_uselargefiles=''
+ldflags_uselargefiles=''
+libswanted_uselargefiles=''
: set usemultiplicity on the Configure command line to enable multiplicity.
: set usesocks on the Configure command line to enable socks.
: set usethreads on the Configure command line to enable threads.
libswanted='sfio socket bind inet nsl nm ndbm gdbm dbm db malloc dl'
libswanted="$libswanted dld ld sun m c cposix posix"
libswanted="$libswanted ndir dir crypt sec"
-libswanted="$libswanted ucb bsd BSD PW x iconv"
+libswanted="$libswanted ucb bsd BSD PW x iconv util"
: We probably want to search /usr/shlib before most other libraries.
: This is only used by the lib/ExtUtils/MakeMaker.pm routine extliblist.
glibpth=`echo " $glibpth " | sed -e 's! /usr/shlib ! !'`
$me: Fatal Error: I can't find a Bourne Shell anywhere.
Usually it's in /bin/sh. How did you even get this far?
-Please contact me (Perl Maintainers) at perlbug@perl.com and
+Please contact me (Perl Maintainers) at perlbug@perl.org and
we'll try to straighten this all out.
EOM
exit 1
case "$fastread$alldone" in
yescont|yesexit) ;;
*)
- if test ! -t 0; then
- echo "Say 'sh Configure', not 'sh <Configure'"
- exit 1
- fi
+ case "$extractsh" in
+ true) ;;
+ *)
+ if test ! -t 0; then
+ echo "Say 'sh Configure', not 'sh <Configure'"
+ exit 1
+ fi
+ ;;
+ esac
;;
esac
You have the option of continuing the configuration process, despite the
distinct possibility that your kit is damaged, by typing 'y'es. If you
do, don't blame me if something goes wrong. I advise you to type 'n'o
-and contact the author (perlbug@perl.com).
+and contact the author (perlbug@perl.org).
EOM
echo $n "Continue? [n] $c" >&4
You may safely delete it if you wish.
EOF
+xversion=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
+case "$usedevel" in
+$define|true|[yY]*) ;;
+*) case "$xversion" in
+ *[13579])
+ cat >&4 <<EOH
+*** WHOA THERE!!! ***
+
+ This is an UNSTABLE DEVELOPMENT release.
+ The version of this $package distribution is $xversion, that is, odd,
+ (as opposed to even) and that signifies a development release.
+ If you want a maintenance release, you want an even-numbered version.
+
+ Do ***NOT*** install this into production use.
+ Data corruption and crashes are possible.
+
+ It is most seriously suggested that you do not continue any further
+ unless you want to help in developing and debugging Perl.
+
+EOH
+ rp='Do you really want to continue?'
+ dflt='n'
+ . ./myread
+ case "$ans" in
+ [yY]) echo >&4 "Okay, continuing." ;;
+ *) echo >&4 "Okay, bye."
+ exit 1
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
: general instructions
needman=true
firsttime=true
Unix system. If despite that it blows up on yours, your best bet is to edit
Configure and run it again. If you can't run Configure for some reason,
you'll have to generate a config.sh file by hand. Whatever problems you
-have, let me (perlbug@perl.com) know how I blew it.
+have, let me (perlbug@perl.org) know how I blew it.
This installation script affects things in two ways:
;;
esac
+cat <<EOS >checkcc
+$startsh
+EOS
+cat <<'EOSC' >>checkcc
+case "$cc" in
+'') ;;
+*) $rm -f try try.*
+ $cat >try.c <<EOM
+int main(int argc, char *argv[]) {
+ return 0;
+}
+EOM
+ if $cc -o try $ccflags try.c; then
+ :
+ else
+ echo "Uh-oh, the C compiler '$cc' doesn't seem to be working." >&4
+ despair=yes
+ trygcc=yes
+ case "$cc" in
+ *gcc*) trygcc=no ;;
+ esac
+ case "`$cc -v -c try.c 2>&1`" in
+ *gcc*) trygcc=no ;;
+ esac
+ if $test X"$trygcc" = Xyes; then
+ if gcc -o try -c try.c; then
+ echo " "
+ echo "You seem to have a working gcc, though." >&4
+ rp="Would you like to use it?"
+ dflt=y
+ if $test -f myread; then
+ . ./myread
+ else
+ if $test -f UU/myread; then
+ . ./UU/myread
+ else
+ echo "Cannot find myread, sorry. Aborting." >&2
+ exit 1
+ fi
+ fi
+ case "$ans" in
+ [yY]*) cc=gcc; ccname=gcc; ccflags=''; despair=no ;;
+ esac
+ fi
+ fi
+ if $test X"$despair" = Xyes; then
+ $cat >&4 <<EOM
+You need to find a working C compiler.
+Either (purchase and) install the C compiler supplied by your OS vendor,
+or for a free C compiler try http://gcc.gnu.org/
+I cannot continue any further, aborting.
+EOM
+ exit 1
+ fi
+ fi
+ $rm -f try try.*
+ ;;
+esac
+EOSC
+
: determine whether symbolic links are supported
echo " "
$touch blurfl
;;
esac
fi
+. ./UU/checkcc
if test ! -f config.sh; then
$cat <<EOM
(cd $src/hints; ls -C *.sh) | $sed 's/\.sh/ /g' >&4
dflt=''
: Half the following guesses are probably wrong... If you have better
- : tests or hints, please send them to perlbug@perl.com
+ : tests or hints, please send them to perlbug@perl.org
: The metaconfig authors would also appreciate a copy...
$test -f /irix && osname=irix
$test -f /xenix && osname=sco_xenix
osf1|mls+) case "$5" in
alpha)
osname=dec_osf
- osvers=`echo "$3" | sed 's/^[xvt]//'`
+ osvers=`sizer -v | awk '{print $3}' | tr '[A-Z]' '[a-z]' | sed 's/^[xvt]//'`
+ case "$osvers" in
+ [1-9].[0-9]*) ;;
+ *) osvers=`echo "$3" | sed 's/^[xvt]//'` ;;
+ esac
;;
hp*) osname=hp_osf1 ;;
mips) osname=mips_osf1 ;;
set usemultiplicity
eval $setvar
-: determine where manual pages are on this system
-echo " "
-case "$sysman" in
-'')
- syspath='/usr/man/man1 /usr/man/mann /usr/man/manl /usr/man/local/man1'
- syspath="$syspath /usr/man/u_man/man1 /usr/share/man/man1"
- syspath="$syspath /usr/catman/u_man/man1 /usr/man/l_man/man1"
- syspath="$syspath /usr/local/man/u_man/man1 /usr/local/man/l_man/man1"
- syspath="$syspath /usr/man/man.L /local/man/man1 /usr/local/man/man1"
- sysman=`./loc . /usr/man/man1 $syspath`
- ;;
-esac
-if $test -d "$sysman"; then
- echo "System manual is in $sysman." >&4
-else
- echo "Could not find manual pages in source form." >&4
-fi
-
-: see what memory models we can support
-case "$models" in
-'')
- $cat >pdp11.c <<'EOP'
-int main() {
-#ifdef pdp11
- exit(0);
-#else
- exit(1);
-#endif
-}
-EOP
- ( cc -o pdp11 pdp11.c ) >/dev/null 2>&1
- if $test -f pdp11 && ./pdp11 2>/dev/null; then
- dflt='unsplit split'
- else
- tans=`./loc . X /lib/small /lib/large /usr/lib/small /usr/lib/large /lib/medium /usr/lib/medium /lib/huge`
- case "$tans" in
- X) dflt='none';;
- *) if $test -d /lib/small || $test -d /usr/lib/small; then
- dflt='small'
- else
- dflt=''
- fi
- if $test -d /lib/medium || $test -d /usr/lib/medium; then
- dflt="$dflt medium"
- fi
- if $test -d /lib/large || $test -d /usr/lib/large; then
- dflt="$dflt large"
- fi
- if $test -d /lib/huge || $test -d /usr/lib/huge; then
- dflt="$dflt huge"
- fi
- esac
- fi;;
-*) dflt="$models";;
-esac
-$cat <<EOM
-
-Some systems have different model sizes. On most systems they are called
-small, medium, large, and huge. On the PDP11 they are called unsplit and
-split. If your system doesn't support different memory models, say "none".
-If you wish to force everything to one memory model, say "none" here and
-put the appropriate flags later when it asks you for other cc and ld flags.
-Venix systems may wish to put "none" and let the compiler figure things out.
-(In the following question multiple model names should be space separated.)
-
-The default for most systems is "none".
-
-EOM
-rp="Which memory models are supported?"
-. ./myread
-models="$ans"
-
-case "$models" in
-none)
- small=''
- medium=''
- large=''
- huge=''
- unsplit=''
- split=''
- ;;
-*split)
- case "$split" in
- '') if $contains '\-i' $sysman/ld.1 >/dev/null 2>&1 || \
- $contains '\-i' $sysman/cc.1 >/dev/null 2>&1; then
- dflt='-i'
- else
- dflt='none'
- fi;;
- *) dflt="$split";;
- esac
- rp="What flag indicates separate I and D space?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';;
- esac
- split="$tans"
- unsplit='';;
-*large*|*small*|*medium*|*huge*)
- case "$models" in
- *large*)
- case "$large" in
- '') dflt='-Ml';;
- *) dflt="$large";;
- esac
- rp="What flag indicates large model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- large="$tans";;
- *) large='';;
- esac
- case "$models" in
- *huge*) case "$huge" in
- '') dflt='-Mh';;
- *) dflt="$huge";;
- esac
- rp="What flag indicates huge model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- huge="$tans";;
- *) huge="$large";;
- esac
- case "$models" in
- *medium*) case "$medium" in
- '') dflt='-Mm';;
- *) dflt="$medium";;
- esac
- rp="What flag indicates medium model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- medium="$tans";;
- *) medium="$large";;
- esac
- case "$models" in
- *small*) case "$small" in
- '') dflt='none';;
- *) dflt="$small";;
- esac
- rp="What flag indicates small model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- small="$tans";;
- *) small='';;
- esac
- ;;
-*)
- echo "Unrecognized memory models--you may have to edit Makefile.SH" >&4
- ;;
-esac
-$rm -f pdp11.* pdp11
-
: make some quick guesses about what we are up against
echo " "
$echo $n "Hmm... $c"
;;
esac
: Detect OS2. The p_ variable is set above in the Head.U unit.
+: Note that this also -- wrongly -- detects e.g. dos-djgpp, which also uses
+: semicolon as a patch separator
case "$p_" in
:) ;;
*)
$cat <<'EOI'
I have the feeling something is not exactly right, however...don't tell me...
lemme think...does HAL ring a bell?...no, of course, you're only running OS/2!
+(Or you may be running DOS with DJGPP.)
EOI
echo exit 0 >os2
;;
$eunicefix bsd usg v7 osf1 eunice xenix venix os2
$rm -f foo
-: see if we need a special compiler
-echo " "
-if ./usg; then
- case "$cc" in
- '') case "$Mcc" in
- /*) dflt='Mcc';;
- *) case "$large" in
- -M*) dflt='cc';;
- *) if $contains '\-M' $sysman/cc.1 >/dev/null 2>&1 ; then
- if $contains '\-M' $sysman/cpp.1 >/dev/null 2>&1; then
- dflt='cc'
- else
- dflt='cc -M'
- fi
- else
- dflt='cc'
- fi;;
- esac;;
- esac;;
- *) dflt="$cc";;
- esac
- case "$dflt" in
- *M*) $cat <<'EOM'
-On some older systems the default C compiler will not resolve multiple global
-references that happen to have the same name. On some such systems the "Mcc"
-command may be used to force these to be resolved. On other systems a "cc -M"
-command is required. (Note that the -M flag on other systems indicates a
-memory model to use!) If you have the Gnu C compiler, you might wish to use
-that instead.
-
-EOM
- ;;
- esac
- rp="Use which C compiler?"
- . ./myread
- cc="$ans"
-else
- case "$cc" in
- '') dflt=cc;;
- *) dflt="$cc";;
- esac
- rp="Use which C compiler?"
- . ./myread
- cc="$ans"
-fi
+case "$cc" in
+'') dflt=cc;;
+*) dflt="$cc";;
+esac
+rp="Use which C compiler?"
+. ./myread
+cc="$ans"
: Look for a hint-file generated 'call-back-unit'. Now that the
: user has specified the compiler, we may need to set or change some
: other defaults.
if $test -f cc.cbu; then
. ./cc.cbu
fi
+. ./checkcc
+
echo " "
echo "Checking for GNU cc in disguise and/or its version number..." >&4
$cat >gccvers.c <<EOM
exit(0);
}
EOM
-if $cc $ldflags -o gccvers gccvers.c; then
+if $cc -o gccvers $ldflags gccvers.c; then
gccversion=`./gccvers`
case "$gccversion" in
'') echo "You are not using GNU cc." ;;
*) echo "You are using GNU cc $gccversion."
+ ccname=gcc
;;
esac
else
case "$gccversion" in
1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
esac
+case "$gccversion" in
+'') gccosandvers='' ;;
+*) gccshortvers=`echo "$gccversion"|sed 's/ .*//'`
+ gccosandvers=`$cc -v 2>&1|grep '/specs$'|sed "s!.*/[^-/]*-[^-/]*-\([^-/]*\)/$gccshortvers/specs!\1!"`
+ gccshortvers=''
+ case "$gccosandvers" in
+ $osname) gccosandvers='' ;; # linux gccs seem to have no linux osvers, grr
+ $osname$osvers) ;; # looking good
+ $osname*) cat <<EOM >&4
-: decide how portable to be. Allow command line overrides.
-case "$d_portable" in
-"$undef") ;;
-*) d_portable="$define" ;;
-esac
-
-: set up shell script to do ~ expansion
-cat >filexp <<EOSS
-$startsh
-: expand filename
-case "\$1" in
- ~/*|~)
- echo \$1 | $sed "s|~|\${HOME-\$LOGDIR}|"
- ;;
- ~*)
- if $test -f /bin/csh; then
- /bin/csh -f -c "glob \$1"
- failed=\$?
- echo ""
- exit \$failed
- else
- name=\`$expr x\$1 : '..\([^/]*\)'\`
- dir=\`$sed -n -e "/^\${name}:/{s/^[^:]*:[^:]*:[^:]*:[^:]*:[^:]*:\([^:]*\).*"'\$'"/\1/" -e p -e q -e '}' </etc/passwd\`
- if $test ! -d "\$dir"; then
- me=\`basename \$0\`
- echo "\$me: can't locate home directory for: \$name" >&2
- exit 1
- fi
- case "\$1" in
- */*)
- echo \$dir/\`$expr x\$1 : '..[^/]*/\(.*\)'\`
- ;;
- *)
- echo \$dir
- ;;
- esac
- fi
- ;;
-*)
- echo \$1
- ;;
-esac
-EOSS
-chmod +x filexp
-$eunicefix filexp
-
-: now set up to get a file name
-cat <<EOS >getfile
-$startsh
-EOS
-cat <<'EOSC' >>getfile
-tilde=''
-fullpath=''
-already=''
-skip=''
-none_ok=''
-exp_file=''
-nopath_ok=''
-orig_rp="$rp"
-orig_dflt="$dflt"
-case "$gfpth" in
-'') gfpth='.' ;;
-esac
-
-case "$fn" in
-*\(*)
- expr $fn : '.*(\(.*\)).*' | tr ',' $trnl >getfile.ok
- fn=`echo $fn | sed 's/(.*)//'`
- ;;
-esac
+*** WHOA THERE!!! ***
-case "$fn" in
-*:*)
- loc_file=`expr $fn : '.*:\(.*\)'`
- fn=`expr $fn : '\(.*\):.*'`
- ;;
-esac
+ Your gcc has not been compiled for the exact release of
+ your operating system ($gccosandvers versus $osname$osvers).
-case "$fn" in
-*~*) tilde=true;;
-esac
-case "$fn" in
-*/*) fullpath=true;;
-esac
-case "$fn" in
-*+*) skip=true;;
-esac
-case "$fn" in
-*n*) none_ok=true;;
-esac
-case "$fn" in
-*e*) exp_file=true;;
-esac
-case "$fn" in
-*p*) nopath_ok=true;;
-esac
+ In general it is a good idea to keep gcc synchronized with
+ the operating system because otherwise serious problems
+ may ensue when trying to compile software, like Perl.
-case "$fn" in
-*f*) type='File';;
-*d*) type='Directory';;
-*l*) type='Locate';;
-esac
+ I'm trying to be optimistic here, though, and will continue.
+ If later during the configuration and build icky compilation
+ problems appear (headerfile conflicts being the most common
+ manifestation), I suggest reinstalling the gcc to match
+ your operating system release.
-what="$type"
-case "$what" in
-Locate) what='File';;
+EOM
+ ;;
+ *) gccosandvers='' ;; # failed to parse, better be silent
+ esac
+ ;;
esac
-
-case "$exp_file" in
-'')
- case "$d_portable" in
- "$define") ;;
- *) exp_file=true;;
- esac
- ;;
+case "$ccname" in
+'') ccname="$cc" ;;
esac
-cd ..
-while test "$type"; do
- redo=''
- rp="$orig_rp"
- dflt="$orig_dflt"
- case "$tilde" in
- true) rp="$rp (~name ok)";;
- esac
- . UU/myread
- if test -f UU/getfile.ok && \
- $contains "^$ans\$" UU/getfile.ok >/dev/null 2>&1
- then
- value="$ans"
- ansexp="$ans"
- break
- fi
- case "$ans" in
- none)
- value=''
- ansexp=''
- case "$none_ok" in
- true) type='';;
- esac
- ;;
- *)
- case "$tilde" in
- '') value="$ans"
- ansexp="$ans";;
- *)
- value=`UU/filexp $ans`
- case $? in
- 0)
- if test "$ans" != "$value"; then
- echo "(That expands to $value on this system.)"
- fi
- ;;
- *) value="$ans";;
- esac
- ansexp="$value"
- case "$exp_file" in
- '') value="$ans";;
- esac
- ;;
- esac
- case "$fullpath" in
- true)
- case "$ansexp" in
- /*) value="$ansexp" ;;
- *)
- redo=true
- case "$already" in
- true)
- echo "I shall only accept a full path name, as in /bin/ls." >&4
- echo "Use a ! shell escape if you wish to check pathnames." >&4
- ;;
- *)
- echo "Please give a full path name, starting with slash." >&4
- case "$tilde" in
- true)
- echo "Note that using ~name is ok provided it expands well." >&4
- already=true
- ;;
- esac
- esac
- ;;
- esac
- ;;
- esac
- case "$redo" in
- '')
- case "$type" in
- File)
- for fp in $gfpth; do
- if test "X$fp" = X.; then
- pf="$ansexp"
- else
- pf="$fp/$ansexp"
- fi
- if test -f "$pf"; then
- type=''
- elif test -r "$pf" || (test -h "$pf") >/dev/null 2>&1
- then
- echo "($value is not a plain file, but that's ok.)"
- type=''
- fi
- if test X"$type" = X; then
- value="$pf"
- break
- fi
- done
- ;;
- Directory)
- for fp in $gfpth; do
- if test "X$fp" = X.; then
- dir="$ans"
- direxp="$ansexp"
- else
- dir="$fp/$ansexp"
- direxp="$fp/$ansexp"
- fi
- if test -d "$direxp"; then
- type=''
- value="$dir"
- break
- fi
- done
- ;;
- Locate)
- if test -d "$ansexp"; then
- echo "(Looking for $loc_file in directory $value.)"
- value="$value/$loc_file"
- ansexp="$ansexp/$loc_file"
- fi
- if test -f "$ansexp"; then
- type=''
- fi
- case "$nopath_ok" in
- true) case "$value" in
- */*) ;;
- *) echo "Assuming $value will be in people's path."
- type=''
- ;;
- esac
- ;;
- esac
- ;;
- esac
-
- case "$skip" in
- true) type='';
- esac
-
- case "$type" in
- '') ;;
- *)
- if test "$fastread" = yes; then
- dflt=y
- else
- dflt=n
- fi
- rp="$what $value doesn't exist. Use that name anyway?"
- . UU/myread
- dflt=''
- case "$ans" in
- y*) type='';;
- *) echo " ";;
- esac
- ;;
- esac
- ;;
- esac
- ;;
- esac
-done
-cd UU
-ans="$value"
-rp="$orig_rp"
-dflt="$orig_dflt"
-rm -f getfile.ok
-test "X$gfpthkeep" != Xy && gfpth=""
-EOSC
-
-: What should the include directory be ?
-echo " "
-$echo $n "Hmm... $c"
-dflt='/usr/include'
-incpath=''
-mips_type=''
-if $test -f /bin/mips && /bin/mips; then
- echo "Looks like a MIPS system..."
- $cat >usr.c <<'EOCP'
-#ifdef SYSTYPE_BSD43
-/bsd43
-#endif
-EOCP
- if $cc -E usr.c > usr.out && $contains / usr.out >/dev/null 2>&1; then
- dflt='/bsd43/usr/include'
- incpath='/bsd43'
- mips_type='BSD 4.3'
- else
- mips_type='System V'
- fi
- $rm -f usr.c usr.out
- echo "and you're compiling with the $mips_type compiler and libraries."
- xxx_prompt=y
- echo "exit 0" >mips
-else
- echo "Doesn't look like a MIPS system."
- xxx_prompt=n
- echo "exit 1" >mips
-fi
-chmod +x mips
-$eunicefix mips
-case "$usrinc" in
-'') ;;
-*) dflt="$usrinc";;
-esac
-case "$xxx_prompt" in
-y) fn=d/
- echo " "
- rp='Where are the include files you want to use?'
- . ./getfile
- usrinc="$ans"
- ;;
-*) usrinc="$dflt"
- ;;
-esac
-
-: see how we invoke the C preprocessor
-echo " "
-echo "Now, how can we feed standard input to your C preprocessor..." >&4
-cat <<'EOT' >testcpp.c
-#define ABC abc
-#define XYZ xyz
-ABC.XYZ
-EOT
+: see how we invoke the C preprocessor
+echo " "
+echo "Now, how can we feed standard input to your C preprocessor..." >&4
+cat <<'EOT' >testcpp.c
+#define ABC abc
+#define XYZ xyz
+ABC.XYZ
+EOT
cd ..
if test ! -f cppstdin; then
if test "X$osname" = "Xaix" -a "X$gccversion" = X; then
esac
$rm -f testcpp.c testcpp.out
-: Set private lib path
-case "$plibpth" in
-'') if ./mips; then
- plibpth="$incpath/usr/lib /usr/local/lib /usr/ccs/lib"
- fi;;
-esac
-case "$libpth" in
-' ') dlist='';;
-'') dlist="$loclibpth $plibpth $glibpth";;
-*) dlist="$libpth";;
+: decide how portable to be. Allow command line overrides.
+case "$d_portable" in
+"$undef") ;;
+*) d_portable="$define" ;;
esac
-: Now check and see which directories actually exist, avoiding duplicates
-libpth=''
-for xxx in $dlist
-do
- if $test -d $xxx; then
- case " $libpth " in
- *" $xxx "*) ;;
- *) libpth="$libpth $xxx";;
- esac
- fi
-done
-$cat <<'EOM'
-
-Some systems have incompatible or broken versions of libraries. Among
-the directories listed in the question below, please remove any you
-know not to be holding relevant libraries, and add any that are needed.
-Say "none" for none.
-
-EOM
-case "$libpth" in
-'') dflt='none';;
-*)
- set X $libpth
- shift
- dflt=${1+"$@"}
- ;;
-esac
-rp="Directories to use for library searches?"
-. ./myread
-case "$ans" in
-none) libpth=' ';;
-*) libpth="$ans";;
-esac
-
-: compute shared library extension
-case "$so" in
-'')
- if xxx=`./loc libc.sl X $libpth`; $test -f "$xxx"; then
- dflt='sl'
+: set up shell script to do ~ expansion
+cat >filexp <<EOSS
+$startsh
+: expand filename
+case "\$1" in
+ ~/*|~)
+ echo \$1 | $sed "s|~|\${HOME-\$LOGDIR}|"
+ ;;
+ ~*)
+ if $test -f /bin/csh; then
+ /bin/csh -f -c "glob \$1"
+ failed=\$?
+ echo ""
+ exit \$failed
else
- dflt='so'
+ name=\`$expr x\$1 : '..\([^/]*\)'\`
+ dir=\`$sed -n -e "/^\${name}:/{s/^[^:]*:[^:]*:[^:]*:[^:]*:[^:]*:\([^:]*\).*"'\$'"/\1/" -e p -e q -e '}' </etc/passwd\`
+ if $test ! -d "\$dir"; then
+ me=\`basename \$0\`
+ echo "\$me: can't locate home directory for: \$name" >&2
+ exit 1
+ fi
+ case "\$1" in
+ */*)
+ echo \$dir/\`$expr x\$1 : '..[^/]*/\(.*\)'\`
+ ;;
+ *)
+ echo \$dir
+ ;;
+ esac
fi
;;
-*) dflt="$so";;
-esac
-$cat <<EOM
-
-On some systems, shared libraries may be available. Answer 'none' if
-you want to suppress searching of shared libraries for the remainder
-of this configuration.
-
-EOM
-rp='What is the file extension used for shared libraries?'
-. ./myread
-so="$ans"
-
-: Define several unixisms.
-: Hints files or command line option can be used to override them.
-: The convoluted testing is in case hints files set either the old
-: or the new name.
-case "$_exe" in
-'') case "$exe_ext" in
- '') ;;
- *) _exe="$exe_ext" ;;
- esac
+*)
+ echo \$1
;;
esac
-case "$_a" in
-'') case "$lib_ext" in
- '') _a='.a';;
- *) _a="$lib_ext" ;;
- esac
- ;;
+EOSS
+chmod +x filexp
+$eunicefix filexp
+
+: now set up to get a file name
+cat <<EOS >getfile
+$startsh
+EOS
+cat <<'EOSC' >>getfile
+tilde=''
+fullpath=''
+already=''
+skip=''
+none_ok=''
+exp_file=''
+nopath_ok=''
+orig_rp="$rp"
+orig_dflt="$dflt"
+case "$gfpth" in
+'') gfpth='.' ;;
esac
-case "$_o" in
-'') case "$obj_ext" in
- '') _o='.o';;
- *) _o="$obj_ext";;
- esac
+
+case "$fn" in
+*\(*)
+ expr $fn : '.*(\(.*\)).*' | tr ',' $trnl >getfile.ok
+ fn=`echo $fn | sed 's/(.*)//'`
;;
esac
-case "$p_" in
-'') case "$path_sep" in
- '') p_=':';;
- *) p_="$path_sep";;
- esac
+
+case "$fn" in
+*:*)
+ loc_file=`expr $fn : '.*:\(.*\)'`
+ fn=`expr $fn : '\(.*\):.*'`
;;
esac
-exe_ext=$_exe
-lib_ext=$_a
-obj_ext=$_o
-path_sep=$p_
-: Which makefile gets called first. This is used by make depend.
-case "$firstmakefile" in
-'') firstmakefile='makefile';;
+case "$fn" in
+*~*) tilde=true;;
esac
-
-case "$usesocks" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
+case "$fn" in
+*/*) fullpath=true;;
esac
-cat <<EOM
-
-Perl can be built to use the SOCKS proxy protocol library. To do so,
-Configure must be run with -Dusesocks.
-
-If this doesn't make any sense to you, just accept the default '$dflt'.
-EOM
-rp='Build Perl for SOCKS?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
+case "$fn" in
+*+*) skip=true;;
esac
-set usesocks
-eval $setvar
-
-: Looking for optional libraries
-echo " "
-echo "Checking for optional libraries..." >&4
-case "$libs" in
-' '|'') dflt='';;
-*) dflt="$libs";;
+case "$fn" in
+*n*) none_ok=true;;
esac
-case "$libswanted" in
-'') libswanted='c_s';;
+case "$fn" in
+*e*) exp_file=true;;
esac
-case "$usesocks" in
-"$define") libswanted="$libswanted socks5 socks5_sh" ;;
+case "$fn" in
+*p*) nopath_ok=true;;
esac
-libsfound=''
-libsfiles=''
-libsdirs=''
-libspath=''
-for thisdir in $libpth $xlibpth; do
- test -d $thisdir && libspath="$libspath $thisdir"
-done
-for thislib in $libswanted; do
- for thisdir in $libspath; do
- xxx=''
- if $test ! -f "$xxx" -a "X$ignore_versioned_solibs" = "X"; then
- xxx=`ls $thisdir/lib$thislib.$so.[0-9] 2>/dev/null|tail -1`
- $test -f "$xxx" && eval $libscheck
- $test -f "$xxx" && libstyle=shared
- fi
- if test ! -f "$xxx"; then
- xxx=$thisdir/lib$thislib.$so
- $test -f "$xxx" && eval $libscheck
- $test -f "$xxx" && libstyle=shared
- fi
- if test ! -f "$xxx"; then
- xxx=$thisdir/lib$thislib$_a
- $test -f "$xxx" && eval $libscheck
- $test -f "$xxx" && libstyle=static
- fi
- if test ! -f "$xxx"; then
- xxx=$thisdir/$thislib$_a
- $test -f "$xxx" && eval $libscheck
- $test -f "$xxx" && libstyle=static
- fi
- if test ! -f "$xxx"; then
- xxx=$thisdir/lib${thislib}_s$_a
- $test -f "$xxx" && eval $libscheck
- $test -f "$xxx" && libstyle=static
- $test -f "$xxx" && thislib=${thislib}_s
- fi
- if test ! -f "$xxx"; then
- xxx=$thisdir/Slib$thislib$_a
- $test -f "$xxx" && eval $libscheck
- $test -f "$xxx" && libstyle=static
- fi
- if $test -f "$xxx"; then
- case "$libstyle" in
- shared) echo "Found -l$thislib (shared)." ;;
- static) echo "Found -l$thislib." ;;
- *) echo "Found -l$thislib ($libstyle)." ;;
- esac
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib"
- libsfound="$libsfound $xxx"
- yyy=`basename $xxx`
- libsfiles="$libsfiles $yyy"
- yyy=`echo $xxx|$sed -e "s%/$yyy\\$%%"`
- case " $libsdirs " in
- *" $yyy "*) ;;
- *) libsdirs="$libsdirs $yyy" ;;
- esac
- ;;
- esac
- break
- fi
- done
- if $test ! -f "$xxx"; then
- echo "No -l$thislib."
- fi
-done
-set X $dflt
-shift
-dflt="$*"
-case "$libs" in
-'') dflt="$dflt";;
-*) dflt="$libs";;
+
+case "$fn" in
+*f*) type='File';;
+*d*) type='Directory';;
+*l*) type='Locate';;
esac
-case "$dflt" in
-' '|'') dflt='none';;
+
+what="$type"
+case "$what" in
+Locate) what='File';;
esac
-$cat <<EOM
+case "$exp_file" in
+'')
+ case "$d_portable" in
+ "$define") ;;
+ *) exp_file=true;;
+ esac
+ ;;
+esac
-In order to compile $package on your machine, a number of libraries
-are usually needed. Include any other special libraries here as well.
-Say "none" for none. The default list is almost always right.
+cd ..
+while test "$type"; do
+ redo=''
+ rp="$orig_rp"
+ dflt="$orig_dflt"
+ case "$tilde" in
+ true) rp="$rp (~name ok)";;
+ esac
+ . UU/myread
+ if test -f UU/getfile.ok && \
+ $contains "^$ans\$" UU/getfile.ok >/dev/null 2>&1
+ then
+ value="$ans"
+ ansexp="$ans"
+ break
+ fi
+ case "$ans" in
+ none)
+ value=''
+ ansexp=''
+ case "$none_ok" in
+ true) type='';;
+ esac
+ ;;
+ *)
+ case "$tilde" in
+ '') value="$ans"
+ ansexp="$ans";;
+ *)
+ value=`UU/filexp $ans`
+ case $? in
+ 0)
+ if test "$ans" != "$value"; then
+ echo "(That expands to $value on this system.)"
+ fi
+ ;;
+ *) value="$ans";;
+ esac
+ ansexp="$value"
+ case "$exp_file" in
+ '') value="$ans";;
+ esac
+ ;;
+ esac
+ case "$fullpath" in
+ true)
+ case "$ansexp" in
+ /*) value="$ansexp" ;;
+ [a-zA-Z]:/*) value="$ansexp" ;;
+ *)
+ redo=true
+ case "$already" in
+ true)
+ echo "I shall only accept a full path name, as in /bin/ls." >&4
+ echo "Use a ! shell escape if you wish to check pathnames." >&4
+ ;;
+ *)
+ echo "Please give a full path name, starting with slash." >&4
+ case "$tilde" in
+ true)
+ echo "Note that using ~name is ok provided it expands well." >&4
+ already=true
+ ;;
+ esac
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ case "$redo" in
+ '')
+ case "$type" in
+ File)
+ for fp in $gfpth; do
+ if test "X$fp" = X.; then
+ pf="$ansexp"
+ else
+ pf="$fp/$ansexp"
+ fi
+ if test -f "$pf"; then
+ type=''
+ elif test -r "$pf" || (test -h "$pf") >/dev/null 2>&1
+ then
+ echo "($value is not a plain file, but that's ok.)"
+ type=''
+ fi
+ if test X"$type" = X; then
+ value="$pf"
+ break
+ fi
+ done
+ ;;
+ Directory)
+ for fp in $gfpth; do
+ if test "X$fp" = X.; then
+ dir="$ans"
+ direxp="$ansexp"
+ else
+ dir="$fp/$ansexp"
+ direxp="$fp/$ansexp"
+ fi
+ if test -d "$direxp"; then
+ type=''
+ value="$dir"
+ break
+ fi
+ done
+ ;;
+ Locate)
+ if test -d "$ansexp"; then
+ echo "(Looking for $loc_file in directory $value.)"
+ value="$value/$loc_file"
+ ansexp="$ansexp/$loc_file"
+ fi
+ if test -f "$ansexp"; then
+ type=''
+ fi
+ case "$nopath_ok" in
+ true) case "$value" in
+ */*) ;;
+ *) echo "Assuming $value will be in people's path."
+ type=''
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+
+ case "$skip" in
+ true) type='';
+ esac
+
+ case "$type" in
+ '') ;;
+ *)
+ if test "$fastread" = yes; then
+ dflt=y
+ else
+ dflt=n
+ fi
+ rp="$what $value doesn't exist. Use that name anyway?"
+ . UU/myread
+ dflt=''
+ case "$ans" in
+ y*) type='';;
+ *) echo " ";;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+done
+cd UU
+ans="$value"
+rp="$orig_rp"
+dflt="$orig_dflt"
+rm -f getfile.ok
+test "X$gfpthkeep" != Xy && gfpth=""
+EOSC
+
+: What should the include directory be ?
+echo " "
+$echo $n "Hmm... $c"
+dflt='/usr/include'
+incpath=''
+mips_type=''
+if $test -f /bin/mips && /bin/mips; then
+ echo "Looks like a MIPS system..."
+ $cat >usr.c <<'EOCP'
+#ifdef SYSTYPE_BSD43
+/bsd43
+#endif
+EOCP
+ if cc -E usr.c > usr.out && $contains / usr.out >/dev/null 2>&1; then
+ dflt='/bsd43/usr/include'
+ incpath='/bsd43'
+ mips_type='BSD 4.3'
+ else
+ mips_type='System V'
+ fi
+ $rm -f usr.c usr.out
+ echo "and you're compiling with the $mips_type compiler and libraries."
+ xxx_prompt=y
+ echo "exit 0" >mips
+else
+ echo "Doesn't look like a MIPS system."
+ xxx_prompt=n
+ echo "exit 1" >mips
+fi
+chmod +x mips
+$eunicefix mips
+case "$usrinc" in
+'') ;;
+*) dflt="$usrinc";;
+esac
+case "$xxx_prompt" in
+y) fn=d/
+ echo " "
+ rp='Where are the include files you want to use?'
+ . ./getfile
+ usrinc="$ans"
+ ;;
+*) usrinc="$dflt"
+ ;;
+esac
+
+: Set private lib path
+case "$plibpth" in
+'') if ./mips; then
+ plibpth="$incpath/usr/lib /usr/local/lib /usr/ccs/lib"
+ fi;;
+esac
+case "$libpth" in
+' ') dlist='';;
+'') dlist="$loclibpth $plibpth $glibpth";;
+*) dlist="$libpth";;
+esac
+
+: Now check and see which directories actually exist, avoiding duplicates
+libpth=''
+for xxx in $dlist
+do
+ if $test -d $xxx; then
+ case " $libpth " in
+ *" $xxx "*) ;;
+ *) libpth="$libpth $xxx";;
+ esac
+ fi
+done
+$cat <<'EOM'
+
+Some systems have incompatible or broken versions of libraries. Among
+the directories listed in the question below, please remove any you
+know not to be holding relevant libraries, and add any that are needed.
+Say "none" for none.
+
+EOM
+case "$libpth" in
+'') dflt='none';;
+*)
+ set X $libpth
+ shift
+ dflt=${1+"$@"}
+ ;;
+esac
+rp="Directories to use for library searches?"
+. ./myread
+case "$ans" in
+none) libpth=' ';;
+*) libpth="$ans";;
+esac
+
+: compute shared library extension
+case "$so" in
+'')
+ if xxx=`./loc libc.sl X $libpth`; $test -f "$xxx"; then
+ dflt='sl'
+ else
+ dflt='so'
+ fi
+ ;;
+*) dflt="$so";;
+esac
+$cat <<EOM
+
+On some systems, shared libraries may be available. Answer 'none' if
+you want to suppress searching of shared libraries for the remainder
+of this configuration.
+
+EOM
+rp='What is the file extension used for shared libraries?'
+. ./myread
+so="$ans"
+
+: Define several unixisms.
+: Hints files or command line option can be used to override them.
+: The convoluted testing is in case hints files set either the old
+: or the new name.
+case "$_exe" in
+'') case "$exe_ext" in
+ '') ;;
+ *) _exe="$exe_ext" ;;
+ esac
+ ;;
+esac
+case "$_a" in
+'') case "$lib_ext" in
+ '') _a='.a';;
+ *) _a="$lib_ext" ;;
+ esac
+ ;;
+esac
+case "$_o" in
+'') case "$obj_ext" in
+ '') _o='.o';;
+ *) _o="$obj_ext";;
+ esac
+ ;;
+esac
+case "$p_" in
+'') case "$path_sep" in
+ '') p_=':';;
+ *) p_="$path_sep";;
+ esac
+ ;;
+esac
+exe_ext=$_exe
+lib_ext=$_a
+obj_ext=$_o
+path_sep=$p_
+
+: Which makefile gets called first. This is used by make depend.
+case "$firstmakefile" in
+'') firstmakefile='makefile';;
+esac
+
+case "$usesocks" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+cat <<EOM
+
+Perl can be built to use the SOCKS proxy protocol library. To do so,
+Configure must be run with -Dusesocks.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Build Perl for SOCKS?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set usesocks
+eval $setvar
+
+: Looking for optional libraries
+echo " "
+echo "Checking for optional libraries..." >&4
+case "$libs" in
+' '|'') dflt='';;
+*) dflt="$libs";;
+esac
+case "$libswanted" in
+'') libswanted='c_s';;
+esac
+case "$usesocks" in
+"$define") libswanted="$libswanted socks5 socks5_sh" ;;
+esac
+libsfound=''
+libsfiles=''
+libsdirs=''
+libspath=''
+for thisdir in $libpth $xlibpth; do
+ test -d $thisdir && libspath="$libspath $thisdir"
+done
+for thislib in $libswanted; do
+ for thisdir in $libspath; do
+ xxx=''
+ if $test ! -f "$xxx" -a "X$ignore_versioned_solibs" = "X"; then
+ xxx=`ls $thisdir/lib$thislib.$so.[0-9] 2>/dev/null|tail -1`
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=shared
+ fi
+ if test ! -f "$xxx"; then
+ xxx=$thisdir/lib$thislib.$so
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=shared
+ fi
+ if test ! -f "$xxx"; then
+ xxx=$thisdir/lib$thislib$_a
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=static
+ fi
+ if test ! -f "$xxx"; then
+ xxx=$thisdir/$thislib$_a
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=static
+ fi
+ if test ! -f "$xxx"; then
+ xxx=$thisdir/lib${thislib}_s$_a
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=static
+ $test -f "$xxx" && thislib=${thislib}_s
+ fi
+ if test ! -f "$xxx"; then
+ xxx=$thisdir/Slib$thislib$_a
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=static
+ fi
+ if $test -f "$xxx"; then
+ case "$libstyle" in
+ shared) echo "Found -l$thislib (shared)." ;;
+ static) echo "Found -l$thislib." ;;
+ *) echo "Found -l$thislib ($libstyle)." ;;
+ esac
+ case " $dflt " in
+ *"-l$thislib "*);;
+ *) dflt="$dflt -l$thislib"
+ libsfound="$libsfound $xxx"
+ yyy=`basename $xxx`
+ libsfiles="$libsfiles $yyy"
+ yyy=`echo $xxx|$sed -e "s%/$yyy\\$%%"`
+ case " $libsdirs " in
+ *" $yyy "*) ;;
+ *) libsdirs="$libsdirs $yyy" ;;
+ esac
+ ;;
+ esac
+ break
+ fi
+ done
+ if $test ! -f "$xxx"; then
+ echo "No -l$thislib."
+ fi
+done
+set X $dflt
+shift
+dflt="$*"
+case "$libs" in
+'') dflt="$dflt";;
+*) dflt="$libs";;
+esac
+case "$dflt" in
+' '|'') dflt='none';;
+esac
+
+$cat <<EOM
+
+In order to compile $package on your machine, a number of libraries
+are usually needed. Include any other special libraries here as well.
+Say "none" for none. The default list is almost always right.
EOM
echo " "
if $test -d $thisincl; then
if $test x$thisincl != x$usrinc; then
case "$dflt" in
- *$thisincl*);;
- *) dflt="$dflt -I$thisincl";;
+ *" -I$thisincl "*);;
+ *) dflt="$dflt -I$thisincl ";;
esac
fi
fi
case "$dflt" in
''|' ') dflt=none;;
esac
+
$cat <<EOH
Your C compiler may want other flags. For this question you should include
#include <stdio.h>
int main() { printf("Ok\n"); exit(0); }
EOF
-set X $cc $optimize $ccflags -o try $ldflags try.c $libs
+set X $cc -o try $optimize $ccflags $ldflags try.c $libs
shift
$cat >try.msg <<'EOM'
I've tried to compile and run the following simple program:
EOM
dflt=y
-if sh -c "$cc $optimize $ccflags -o try $ldflags try.c $libs" >>try.msg 2>&1; then
+if sh -c "$cc -o try $optimize $ccflags $ldflags try.c $libs" >>try.msg 2>&1; then
if sh -c './try' >>try.msg 2>&1; then
xxx=`./try`
case "$xxx" in
compile='
mc_file=$1;
shift;
-$cc $optimize $ccflags $ldflags -o ${mc_file} $* ${mc_file}.c $libs > /dev/null 2>&1;'
+$cc -o ${mc_file} $optimize $ccflags $ldflags $* ${mc_file}.c $libs > /dev/null 2>&1;'
: define a shorthand compile call for compilations that should be ok.
compile_ok='
mc_file=$1;
shift;
-$cc $optimize $ccflags $ldflags -o ${mc_file} $* ${mc_file}.c $libs;'
+$cc -o ${mc_file} $optimize $ccflags $ldflags $* ${mc_file}.c $libs;'
: check for lengths of integral types
echo " "
esac
cat <<EOM
-You may also choose to try maximal 64-bitness. It means using as much
-64-bitness as possible on the platform. This in turn means even more
-binary incompatibilities. On the other hand, your platform may not
-have any more 64-bitness available than what you already have chosen.
+You may also choose to try maximal 64-bitness. It means using as much
+64-bitness as possible on the platform. This in turn means even more
+binary incompatibilities. On the other hand, your platform may not
+have any more 64-bitness available than what you already have chosen.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Try to use maximal 64-bit support, if available?'
+. ./myread
+case "$ans" in
+[yY]*) val="$define" ;;
+*) val="$undef" ;;
+esac
+set use64bitall
+eval $setvar
+case "$use64bitall" in
+"$define")
+ case "$use64bitint" in
+ "$undef")
+ cat <<EOM
+
+Since you have chosen a maximally 64-bit build, I'm also turning on
+the use of 64-bit integers.
+EOM
+ use64bitint="$define" ;;
+ esac
+ ;;
+esac
+
+case "$use64bitint" in
+"$define"|true|[yY]*)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that a 64-bit perl is to be built,
+: we may need to set or change some other defaults.
+ if $test -f use64bitint.cbu; then
+ echo "Your platform has some specific hints for 64-bit integers, using them..."
+ . ./use64bitint.cbu
+ fi
+ case "$longsize" in
+ 4) case "$archname64" in
+ '') archname64=64int ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
+case "$use64bitall" in
+"$define"|true|[yY]*)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that a maximally 64-bit perl is to be built,
+: we may need to set or change some other defaults.
+ if $test -f use64bitall.cbu; then
+ echo "Your platform has some specific hints for 64-bit builds, using them..."
+ . ./use64bitall.cbu
+ fi
+ case "$longsize" in
+ 4) case "$archname64" in
+ ''|64int) archname64=64all ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
+echo " "
+echo "Checking for GNU C Library..." >&4
+cat >gnulibc.c <<EOM
+#include <stdio.h>
+int main()
+{
+#ifdef __GLIBC__
+ exit(0);
+#else
+ exit(1);
+#endif
+}
+EOM
+set gnulibc
+if eval $compile_ok && ./gnulibc; then
+ val="$define"
+ echo "You are using the GNU C Library"
+else
+ val="$undef"
+ echo "You are not using the GNU C Library"
+fi
+$rm -f gnulibc*
+set d_gnulibc
+eval $setvar
+
+: see if nm is to be used to determine whether a symbol is defined or not
+case "$usenm" in
+'')
+ dflt=''
+ case "$d_gnulibc" in
+ "$define")
+ echo " "
+ echo "nm probably won't work on the GNU C Library." >&4
+ dflt=n
+ ;;
+ esac
+ case "$dflt" in
+ '')
+ if $test "$osname" = aix -a ! -f /lib/syscalls.exp; then
+ echo " "
+ echo "Whoops! This is an AIX system without /lib/syscalls.exp!" >&4
+ echo "'nm' won't be sufficient on this sytem." >&4
+ dflt=n
+ fi
+ ;;
+ esac
+ case "$dflt" in
+ '') dflt=`$egrep 'inlibc|csym' $rsrc/Configure | wc -l 2>/dev/null`
+ if $test $dflt -gt 20; then
+ dflt=y
+ else
+ dflt=n
+ fi
+ ;;
+ esac
+ ;;
+*)
+ case "$usenm" in
+ true|$define) dflt=y;;
+ *) dflt=n;;
+ esac
+ ;;
+esac
+$cat <<EOM
+
+I can use $nm to extract the symbols from your C libraries. This
+is a time consuming task which may generate huge output on the disk (up
+to 3 megabytes) but that should make the symbols extraction faster. The
+alternative is to skip the 'nm' extraction part and to compile a small
+test program instead to determine whether each symbol is present. If
+you have a fast C compiler and/or if your 'nm' output cannot be parsed,
+this may be the best solution.
+
+You probably shouldn't let me use 'nm' if you are using the GNU C Library.
-If this doesn't make any sense to you, just accept the default '$dflt'.
EOM
-rp='Try to use maximal 64-bit support, if available?'
+rp="Shall I use $nm to extract C symbols from the libraries?"
. ./myread
case "$ans" in
-[yY]*) val="$define" ;;
-*) val="$undef" ;;
+[Nn]*) usenm=false;;
+*) usenm=true;;
esac
-set use64bitall
-eval $setvar
-case "$use64bitall" in
-"$define")
- case "$use64bitint" in
- "$undef")
- cat <<EOM
-Since you have chosen a maximally 64-bit build, I'm also turning on
-the use of 64-bit integers.
-EOM
- use64bitint="$define" ;;
- esac
- ;;
+runnm=$usenm
+case "$reuseval" in
+true) runnm=false;;
esac
-case "$use64bitint" in
-"$define"|true|[yY]*)
-: Look for a hint-file generated 'call-back-unit'. If the
-: user has specified that a 64-bit perl is to be built,
-: we may need to set or change some other defaults.
- if $test -f use64bitint.cbu; then
- echo "Your platform has some specific hints for 64-bit integers, using them..."
- . ./use64bitint.cbu
- fi
- case "$longsize" in
- 4) case "$archname64" in
- '') archname64=64int ;;
- esac
- ;;
- esac
- ;;
+: nm options which may be necessary
+case "$nm_opt" in
+'') if $test -f /mach_boot; then
+ nm_opt='' # Mach
+ elif $test -d /usr/ccs/lib; then
+ nm_opt='-p' # Solaris (and SunOS?)
+ elif $test -f /dgux; then
+ nm_opt='-p' # DG-UX
+ elif $test -f /lib64/rld; then
+ nm_opt='-p' # 64-bit Irix
+ else
+ nm_opt=''
+ fi;;
esac
-case "$use64bitall" in
-"$define"|true|[yY]*)
-: Look for a hint-file generated 'call-back-unit'. If the
-: user has specified that a maximally 64-bit perl is to be built,
-: we may need to set or change some other defaults.
- if $test -f use64bitall.cbu; then
- echo "Your platform has some specific hints for 64-bit builds, using them..."
- . ./use64bitall.cbu
- fi
- case "$longsize" in
- 4) case "$archname64" in
- ''|64int) archname64=64all ;;
- esac
- ;;
+: nm options which may be necessary for shared libraries but illegal
+: for archive libraries. Thank you, Linux.
+case "$nm_so_opt" in
+'') case "$myuname" in
+ *linux*)
+ if $nm --help | $grep 'dynamic' > /dev/null 2>&1; then
+ nm_so_opt='--dynamic'
+ fi
+ ;;
esac
;;
esac
-: determine the architecture name
+case "$runnm" in
+true)
+: get list of predefined functions in a handy place
echo " "
-if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
- tarch=`arch`"-$osname"
-elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
- if uname -m > tmparch 2>&1 ; then
- tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
- -e 's/$/'"-$osname/" tmparch`
- else
- tarch="$osname"
- fi
- $rm -f tmparch
-else
- tarch="$osname"
-fi
-case "$myarchname" in
-''|"$tarch") ;;
-*)
- echo "(Your architecture name used to be $myarchname.)"
- archname=''
- ;;
-esac
-myarchname="$tarch"
-case "$archname" in
-'') dflt="$tarch";;
-*) dflt="$archname";;
-esac
-rp='What is your architecture name'
-. ./myread
-archname="$ans"
-case "$usethreads" in
-$define)
- echo "Threads selected." >&4
- case "$archname" in
- *-thread*) echo "...and architecture name already has -thread." >&4
- ;;
- *) archname="$archname-thread"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
-esac
-case "$usemultiplicity" in
-$define)
- echo "Multiplicity selected." >&4
- case "$archname" in
- *-multi*) echo "...and architecture name already has -multi." >&4
- ;;
- *) archname="$archname-multi"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
+case "$libc" in
+'') libc=unknown
+ case "$libs" in
+ *-lc_s*) libc=`./loc libc_s$_a $libc $libpth`
+ esac
;;
esac
-case "$use64bitint" in
-$define)
- case "$archname64" in
- '')
+libnames='';
+case "$libs" in
+'') ;;
+*) for thislib in $libs; do
+ case "$thislib" in
+ -lc|-lc_s)
+ : Handle C library specially below.
;;
- *)
- case "$archname" in
- *-$archname64*) echo "...and architecture name already has $archname64." >&4
- ;;
- *) archname="$archname-$archname64"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
+ -l*)
+ thislib=`echo $thislib | $sed -e 's/^-l//'`
+ if try=`./loc lib$thislib.$so.'*' X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib.$so X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib$_a X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc $thislib$_a X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc $thislib X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc Slib$thislib$_a X $xlibpth`; $test -f "$try"; then
+ :
+ else
+ try=''
+ fi
+ libnames="$libnames $try"
;;
+ *) libnames="$libnames $thislib" ;;
esac
+ done
+ ;;
+esac
+xxx=normal
+case "$libc" in
+unknown)
+ set /lib/libc.$so
+ for xxx in $libpth; do
+ $test -r $1 || set $xxx/libc.$so
+ : The messy sed command sorts on library version numbers.
+ $test -r $1 || \
+ set `echo blurfl; echo $xxx/libc.$so.[0-9]* | \
+ tr ' ' $trnl | egrep -v '\.[A-Za-z]*$' | $sed -e '
+ h
+ s/[0-9][0-9]*/0000&/g
+ s/0*\([0-9][0-9][0-9][0-9][0-9]\)/\1/g
+ G
+ s/\n/ /' | \
+ sort | $sed -e 's/^.* //'`
+ eval set \$$#
+ done
+ $test -r $1 || set /usr/ccs/lib/libc.$so
+ $test -r $1 || set /lib/libsys_s$_a
+ ;;
+*)
+ set blurfl
+ ;;
esac
+if $test -r "$1"; then
+ echo "Your (shared) C library seems to be in $1."
+ libc="$1"
+elif $test -r /lib/libc && $test -r /lib/clib; then
+ echo "Your C library seems to be in both /lib/clib and /lib/libc."
+ xxx=apollo
+ libc='/lib/clib /lib/libc'
+ if $test -r /lib/syslib; then
+ echo "(Your math library is in /lib/syslib.)"
+ libc="$libc /lib/syslib"
+ fi
+elif $test -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
+ echo "Your C library seems to be in $libc, as you said before."
+elif $test -r $incpath/usr/lib/libc$_a; then
+ libc=$incpath/usr/lib/libc$_a;
+ echo "Your C library seems to be in $libc. That's fine."
+elif $test -r /lib/libc$_a; then
+ libc=/lib/libc$_a;
+ echo "Your C library seems to be in $libc. You're normal."
+else
+ if tans=`./loc libc$_a blurfl/dyick $libpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc libc blurfl/dyick $libpth`; $test -r "$tans"; then
+ libnames="$libnames "`./loc clib blurfl/dyick $libpth`
+ elif tans=`./loc clib blurfl/dyick $libpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc Slibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc Mlibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
+ :
+ else
+ tans=`./loc Llibc$_a blurfl/dyick $xlibpth`
+ fi
+ if $test -r "$tans"; then
+ echo "Your C library seems to be in $tans, of all places."
+ libc=$tans
+ else
+ libc='blurfl'
+ fi
+fi
+if $test $xxx = apollo -o -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
+ dflt="$libc"
+ cat <<EOM
-: determine root of directory hierarchy where package will be installed.
-case "$prefix" in
-'')
- dflt=`./loc . /usr/local /usr/local /local /opt /usr`
- ;;
-*)
- dflt="$prefix"
- ;;
-esac
-$cat <<EOM
+If the guess above is wrong (which it might be if you're using a strange
+compiler, or your machine supports multiple models), you can override it here.
-By default, $package will be installed in $dflt/bin, manual pages
-under $dflt/man, etc..., i.e. with $dflt as prefix for all
-installation directories. Typically this is something like /usr/local.
-If you wish to have binaries under /usr/bin but other parts of the
-installation under /usr/local, that's ok: you will be prompted
-separately for each of the installation directories, the prefix being
-only used to set the defaults.
+EOM
+else
+ dflt=''
+ echo $libpth | tr ' ' $trnl | sort | uniq > libpath
+ cat >&4 <<EOM
+I can't seem to find your C library. I've looked in the following places:
EOM
-fn=d~
-rp='Installation prefix to use?'
+ $sed 's/^/ /' libpath
+ cat <<EOM
+
+None of these seems to contain your C library. I need to get its name...
+
+EOM
+fi
+fn=f
+rp='Where is your C library?'
. ./getfile
-oldprefix=''
-case "$prefix" in
-'') ;;
-*)
- case "$ans" in
- "$prefix") ;;
- *) oldprefix="$prefix";;
- esac
- ;;
-esac
-prefix="$ans"
-prefixexp="$ansexp"
+libc="$ans"
-: is AFS running?
echo " "
-case "$afs" in
-$define|true) afs=true ;;
-$undef|false) afs=false ;;
-*) if test -d /afs; then
- afs=true
+echo $libc $libnames | tr ' ' $trnl | sort | uniq > libnames
+set X `cat libnames`
+shift
+xxx=files
+case $# in 1) xxx=file; esac
+echo "Extracting names from the following $xxx for later perusal:" >&4
+echo " "
+$sed 's/^/ /' libnames >&4
+echo " "
+$echo $n "This may take a while...$c" >&4
+
+for file in $*; do
+ case $file in
+ *$so*) $nm $nm_so_opt $nm_opt $file 2>/dev/null;;
+ *) $nm $nm_opt $file 2>/dev/null;;
+ esac
+done >libc.tmp
+
+$echo $n ".$c"
+$grep fprintf libc.tmp > libc.ptf
+xscan='eval "<libc.ptf $com >libc.list"; $echo $n ".$c" >&4'
+xrun='eval "<libc.tmp $com >libc.list"; echo "done" >&4'
+xxx='[ADTSIW]'
+if com="$sed -n -e 's/__IO//' -e 's/^.* $xxx *_[_.]*//p' -e 's/^.* $xxx *//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^__*//' -e 's/^\([a-zA-Z_0-9$]*\).*xtern.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e '/|UNDEF/d' -e '/FUNC..GL/s/^.*|__*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.* D __*//p' -e 's/^.* D //p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^_//' -e 's/^\([a-zA-Z_0-9]*\).*xtern.*text.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$grep '|' | $sed -n -e '/|COMMON/d' -e '/|DATA/d' \
+ -e '/ file/d' -e 's/^\([^ ]*\).*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p' -e 's/^.*|FUNC |WEAK .*|//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^__//' -e '/|Undef/d' -e '/|Proc/s/ .*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|Proc .*|Text *| *//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e '/Def. Text/s/.* \([^ ]*\)\$/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^[-0-9a-f ]*_\(.*\)=.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/.*\.text n\ \ \ \.//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="sed -n -e 's/^__.*//' -e 's/[ ]*D[ ]*[0-9]*.*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+else
+ $nm -p $* 2>/dev/null >libc.tmp
+ $grep fprintf libc.tmp > libc.ptf
+ if com="$sed -n -e 's/^.* [ADTSIW] *_[_.]*//p' -e 's/^.* [ADTSIW] //p'";\
+ eval $xscan; $contains '^fprintf$' libc.list >/dev/null 2>&1
+ then
+ nm_opt='-p'
+ eval $xrun
else
- afs=false
+ echo " "
+ echo "$nm didn't seem to work right. Trying $ar instead..." >&4
+ com=''
+ if $ar t $libc > libc.tmp && $contains '^fprintf$' libc.tmp >/dev/null 2>&1; then
+ for thisname in $libnames $libc; do
+ $ar t $thisname >>libc.tmp
+ done
+ $sed -e "s/\\$_o\$//" < libc.tmp > libc.list
+ echo "Ok." >&4
+ elif test "X$osname" = "Xos2" && $ar tv $libc > libc.tmp; then
+ # Repeat libc to extract forwarders to DLL entries too
+ for thisname in $libnames $libc; do
+ $ar tv $thisname >>libc.tmp
+ # Revision 50 of EMX has bug in $ar.
+ # it will not extract forwarders to DLL entries
+ # Use emximp which will extract exactly them.
+ emximp -o tmp.imp $thisname \
+ 2>/dev/null && \
+ $sed -e 's/^\([_a-zA-Z0-9]*\) .*$/\1/p' \
+ < tmp.imp >>libc.tmp
+ $rm tmp.imp
+ done
+ $sed -e "s/\\$_o\$//" -e 's/^ \+//' < libc.tmp > libc.list
+ echo "Ok." >&4
+ else
+ echo "$ar didn't seem to work right." >&4
+ echo "Maybe this is a Cray...trying bld instead..." >&4
+ if bld t $libc | $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" > libc.list
+ then
+ for thisname in $libnames; do
+ bld t $libnames | \
+ $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" >>libc.list
+ $ar t $thisname >>libc.tmp
+ done
+ echo "Ok." >&4
+ else
+ echo "That didn't work either. Giving up." >&4
+ exit 1
+ fi
+ fi
fi
- ;;
+fi
+nm_extract="$com"
+if $test -f /lib/syscalls.exp; then
+ echo " "
+ echo "Also extracting names from /lib/syscalls.exp for good ole AIX..." >&4
+ $sed -n 's/^\([^ ]*\)[ ]*syscall[0-9]*$/\1/p' /lib/syscalls.exp >>libc.list
+fi
+;;
+esac
+$rm -f libnames libpath
+
+: is a C symbol defined?
+csym='tlook=$1;
+case "$3" in
+-v) tf=libc.tmp; tc=""; tdc="";;
+-a) tf=libc.tmp; tc="[0]"; tdc="[]";;
+*) tlook="^$1\$"; tf=libc.list; tc="()"; tdc="()";;
+esac;
+tx=yes;
+case "$reuseval-$4" in
+true-) ;;
+true-*) tx=no; eval "tval=\$$4"; case "$tval" in "") tx=yes;; esac;;
+esac;
+case "$tx" in
+yes)
+ case "$runnm" in
+ true)
+ if $contains $tlook $tf >/dev/null 2>&1;
+ then tval=true;
+ else tval=false;
+ fi;;
+ *)
+ echo "int main() { extern short $1$tdc; printf(\"%hd\", $1$tc); }" > t.c;
+ if $cc -o t $optimize $ccflags $ldflags t.c $libs >/dev/null 2>&1;
+ then tval=true;
+ else tval=false;
+ fi;
+ $rm -f t t.c;;
+ esac;;
+*)
+ case "$tval" in
+ $define) tval=true;;
+ *) tval=false;;
+ esac;;
+esac;
+eval "$2=$tval"'
+
+: define an is-in-libc? function
+inlibc='echo " "; td=$define; tu=$undef;
+sym=$1; var=$2; eval "was=\$$2";
+tx=yes;
+case "$reuseval$was" in
+true) ;;
+true*) tx=no;;
+esac;
+case "$tx" in
+yes)
+ set $sym tres -f;
+ eval $csym;
+ case "$tres" in
+ true)
+ echo "$sym() found." >&4;
+ case "$was" in $undef) . ./whoa; esac; eval "$var=\$td";;
+ *)
+ echo "$sym() NOT found." >&4;
+ case "$was" in $define) . ./whoa; esac; eval "$var=\$tu";;
+ esac;;
+*)
+ case "$was" in
+ $define) echo "$sym() found." >&4;;
+ *) echo "$sym() NOT found." >&4;;
+ esac;;
+esac'
+
+: see if sqrtl exists
+set sqrtl d_sqrtl
+eval $inlibc
+
+case "$ccflags" in
+*-DUSE_LONG_DOUBLE*|*-DUSE_MORE_BITS*) uselongdouble="$define" ;;
esac
-if $afs; then
- echo "AFS may be running... I'll be extra cautious then..." >&4
-else
- echo "AFS does not seem to be running..." >&4
-fi
-: determine installation prefix for where package is to be installed.
-if $afs; then
-$cat <<EOM
+case "$uselongdouble" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+cat <<EOM
-Since you are running AFS, I need to distinguish the directory in which
-files will reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
+Perl can be built to take advantage of long doubles which
+(if available) may give more accuracy and range for floating point numbers.
+If this doesn't make any sense to you, just accept the default '$dflt'.
EOM
- case "$installprefix" in
- '') dflt=`echo $prefix | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installprefix";;
- esac
-else
-$cat <<EOM
+rp='Try to use long doubles if available?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set uselongdouble
+eval $setvar
-In some special cases, particularly when building $package for distribution,
-it is convenient to distinguish between the directory in which files should
-be installed from the directory ($prefix) in which they
-will eventually reside. For most users, these two directories are the same.
+case "$uselongdouble" in
+true|[yY]*) uselongdouble="$define" ;;
+esac
+case "$uselongdouble" in
+$define)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that long doubles should be used,
+: we may need to set or change some other defaults.
+ if $test -f uselongdouble.cbu; then
+ echo "Your platform has some specific hints for long doubles, using them..."
+ . ./uselongdouble.cbu
+ else
+ $cat <<EOM
+(Your platform doesn't have any specific hints for long doubles.)
EOM
- case "$installprefix" in
- '') dflt=$prefix ;;
- *) dflt=$installprefix;;
- esac
-fi
-fn=d~
-rp='What installation prefix should I use for installing files?'
-. ./getfile
-installprefix="$ans"
-installprefixexp="$ansexp"
+ fi
+ ;;
+esac
-: set the prefixit variable, to compute a suitable default value
-prefixit='case "$3" in
-""|none)
- case "$oldprefix" in
- "") eval "$1=\"\$$2\"";;
- *)
- case "$3" in
- "") eval "$1=";;
- none)
- eval "tp=\"\$$2\"";
- case "$tp" in
- ""|" ") eval "$1=\"\$$2\"";;
- *) eval "$1=";;
- esac;;
- esac;;
- esac;;
-*)
- eval "tp=\"$oldprefix-\$$2-\""; eval "tp=\"$tp\"";
- case "$tp" in
- --|/*--|\~*--) eval "$1=\"$prefix/$3\"";;
- /*-$oldprefix/*|\~*-$oldprefix/*)
- eval "$1=\`echo \$$2 | sed \"s,^$oldprefix,$prefix,\"\`";;
- *) eval "$1=\"\$$2\"";;
- esac;;
-esac'
+case "$uselongdouble:$d_sqrtl" in
+$define:$undef)
+ $cat <<EOM >&4
+*** You requested the use of long doubles but you do not seem to have
+*** the mathematic functions for long doubles. I'm disabling the use
+*** of long doubles.
-: get the patchlevel
-echo " "
-echo "Getting the current patchlevel..." >&4
-if $test -r $rsrc/patchlevel.h;then
- revision=`awk '/define[ ]+PERL_REVISION/ {print $3}' $rsrc/patchlevel.h`
- patchlevel=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
- subversion=`awk '/define[ ]+PERL_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
- api_revision=`awk '/define[ ]+PERL_API_REVISION/ {print $3}' $rsrc/patchlevel.h`
- api_version=`awk '/define[ ]+PERL_API_VERSION/ {print $3}' $rsrc/patchlevel.h`
- api_subversion=`awk '/define[ ]+PERL_API_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
-else
- revision=0
- patchlevel=0
- subversion=0
- api_revision=0
- api_version=0
- api_subversion=0
-fi
-$echo $n "(You have $package revision $revision" $c
-$echo $n " patchlevel $patchlevel" $c
-test 0 -eq "$subversion" || $echo $n " subversion $subversion" $c
-echo ".)"
-case "$osname" in
-dos|vms)
- : XXX Should be a Configure test for double-dots in filenames.
- version=`echo $revision $patchlevel $subversion | \
- $awk '{ printf "%d_%d_%d\n", $1, $2, $3 }'`
- api_versionstring=`echo $api_revision $api_version $api_subversion | \
- $awk '{ printf "%d_%d_%d\n", $1, $2, $3 }'`
- ;;
-*)
- version=`echo $revision $patchlevel $subversion | \
- $awk '{ printf "%d.%d.%d\n", $1, $2, $3 }'`
- api_versionstring=`echo $api_revision $api_version $api_subversion | \
- $awk '{ printf "%d.%d.%d\n", $1, $2, $3 }'`
+EOM
+ uselongdouble=$undef
;;
esac
-: Special case the 5.005_xx maintenance series, which used 5.005
-: without any subversion label as a subdirectory in $sitelib
-if test "${api_revision}${api_version}${api_subversion}" = "550"; then
- api_versionstring='5.005'
-fi
-: determine installation style
-: For now, try to deduce it from prefix unless it is already set.
-: Reproduce behavior of 5.005 and earlier, maybe drop that in 5.7.
-case "$installstyle" in
-'') case "$prefix" in
- *perl*) dflt='lib';;
- *) dflt='lib/perl5' ;;
- esac
+: check for length of double
+echo " "
+case "$doublesize" in
+'')
+ echo "Checking to see how big your double precision numbers are..." >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", (int)sizeof(double));
+ exit(0);
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ doublesize=`./try`
+ echo "Your double is $doublesize bytes long."
+ else
+ dflt='8'
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of a double precision number (in bytes)?"
+ . ./myread
+ doublesize="$ans"
+ fi
;;
-*) dflt="$installstyle" ;;
-esac
-: Probably not worth prompting for this since we prompt for all
-: the directories individually, and the prompt would be too long and
-: confusing anyway.
-installstyle=$dflt
-
-: determine where private library files go
-: Usual default is /usr/local/lib/perl5/$version.
-: Also allow things like /opt/perl/lib/$version, since
-: /opt/perl/lib/perl5... would be redundant.
-: The default "style" setting is made in installstyle.U
-case "$installstyle" in
-*lib/perl5*) set dflt privlib lib/$package/$version ;;
-*) set dflt privlib lib/$version ;;
esac
-eval $prefixit
-$cat <<EOM
-
-There are some auxiliary files for $package that need to be put into a
-private library directory that is accessible by everyone.
+$rm -f try.c try
-EOM
-fn=d~+
-rp='Pathname where the private library files will reside?'
-. ./getfile
-privlib="$ans"
-privlibexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installprivlib=`echo $privlibexp | sed "s#^$prefix#$installprefix#"`
+: check for long doubles
+echo " "
+echo "Checking to see if you have long double..." >&4
+echo 'int main() { long double x = 7.0; }' > try.c
+set try
+if eval $compile; then
+ val="$define"
+ echo "You have long double."
else
- installprivlib="$privlibexp"
+ val="$undef"
+ echo "You do not have long double."
fi
+$rm try.*
+set d_longdbl
+eval $setvar
-: set the prefixup variable, to restore leading tilda escape
-prefixup='case "$prefixexp" in
-"$prefix") ;;
-*) eval "$1=\`echo \$$1 | sed \"s,^$prefixexp,$prefix,\"\`";;
-esac'
-
-: determine where public architecture dependent libraries go
-set archlib archlib
-eval $prefixit
-: privlib default is /usr/local/lib/$package/$version
-: archlib default is /usr/local/lib/$package/$version/$archname
-: privlib may have an optional trailing /share.
-tdflt=`echo $privlib | $sed 's,/share$,,'`
-tdflt=$tdflt/$archname
-case "$archlib" in
-'') dflt=$tdflt
+: check for length of long double
+case "${d_longdbl}${longdblsize}" in
+$define)
+ echo " "
+ echo "Checking to see how big your long doubles are..." >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", sizeof(long double));
+}
+EOCP
+ set try
+ set try
+ if eval $compile; then
+ longdblsize=`./try$exe_ext`
+ echo "Your long doubles are $longdblsize bytes long."
+ else
+ dflt='8'
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)" >&4
+ rp="What is the size of a long double (in bytes)?"
+ . ./myread
+ longdblsize="$ans"
+ fi
+ if $test "X$doublesize" = "X$longdblsize"; then
+ echo "(That isn't any different from an ordinary double.)"
+ fi
;;
-*) dflt="$archlib"
- ;;
esac
-$cat <<EOM
-
-$spackage contains architecture-dependent library files. If you are
-sharing libraries in a heterogeneous environment, you might store
-these files in a separate location. Otherwise, you can just include
-them with the rest of the public library files.
+$rm -f try.* try
-EOM
-fn=d+~
-rp='Where do you want to put the public architecture-dependent libraries?'
-. ./getfile
-archlib="$ans"
-archlibexp="$ansexp"
-if $test X"$archlib" = X"$privlib"; then
- d_archlib="$undef"
-else
- d_archlib="$define"
-fi
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installarchlib=`echo $archlibexp | sed "s#^$prefix#$installprefix#"`
+: determine the architecture name
+echo " "
+if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
+ tarch=`arch`"-$osname"
+elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
+ if uname -m > tmparch 2>&1 ; then
+ tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
+ -e 's/$/'"-$osname/" tmparch`
+ else
+ tarch="$osname"
+ fi
+ $rm -f tmparch
else
- installarchlib="$archlibexp"
+ tarch="$osname"
fi
-
-
-: Binary compatibility with 5.005 is not possible for builds
-: with advanced features
-case "$usethreads$usemultiplicity" in
-*define*)
- bincompat5005="$undef"
- d_bincompat5005="$undef"
+case "$myarchname" in
+''|"$tarch") ;;
+*)
+ echo "(Your architecture name used to be $myarchname.)"
+ archname=''
;;
-*) $cat <<EOM
-
-This version of Perl can be compiled for binary compatibility with 5.005.
-If you decide to do so, you will be able to continue using most of the
-extensions that were compiled for Perl 5.005.
-
-EOM
- case "$bincompat5005$d_bincompat5005" in
- *"$undef"*) dflt=n ;;
- *) dflt=y ;;
- esac
- rp='Binary compatibility with Perl 5.005?'
- . ./myread
- case "$ans" in
- y*) val="$define" ;;
- *) val="$undef" ;;
+esac
+myarchname="$tarch"
+case "$archname" in
+'') dflt="$tarch";;
+*) dflt="$archname";;
+esac
+rp='What is your architecture name'
+. ./myread
+archname="$ans"
+case "$usethreads" in
+$define)
+ echo "Threads selected." >&4
+ case "$archname" in
+ *-thread*) echo "...and architecture name already has -thread." >&4
+ ;;
+ *) archname="$archname-thread"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+esac
+case "$usemultiplicity" in
+$define)
+ echo "Multiplicity selected." >&4
+ case "$archname" in
+ *-multi*) echo "...and architecture name already has -multi." >&4
+ ;;
+ *) archname="$archname-multi"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+esac
+case "$use64bitint$use64bitall" in
+*"$define"*)
+ case "$archname64" in
+ '')
+ echo "This architecture is naturally 64-bit, not changing architecture name." >&4
+ ;;
+ *)
+ case "$use64bitint" in
+ "$define") echo "64 bit integers selected." >&4 ;;
+ esac
+ case "$use64bitall" in
+ "$define") echo "Maximal 64 bitness selected." >&4 ;;
+ esac
+ case "$archname" in
+ *-$archname64*) echo "...and architecture name already has $archname64." >&4
+ ;;
+ *) archname="$archname-$archname64"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
esac
- set d_bincompat5005
- eval $setvar
- case "$d_bincompat5005" in
- "$define")
- bincompat5005="$define"
+esac
+case "$uselongdouble" in
+$define)
+ echo "Long doubles selected." >&4
+ case "$longdblsize" in
+ $doublesize)
+ "...but long doubles are equal to doubles, not changing architecture name." >&4
;;
- *) bincompat5005="$undef"
- d_bincompat5005="$undef"
+ *)
+ case "$archname" in
+ *-ld*) echo "...and architecture name already has -ld." >&4
+ ;;
+ *) archname="$archname-ld"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
;;
esac
;;
esac
-
-: see if setuid scripts can be secure
+: determine root of directory hierarchy where package will be installed.
+case "$prefix" in
+'')
+ dflt=`./loc . /usr/local /usr/local /local /opt /usr`
+ ;;
+*)
+ dflt="$prefix"
+ ;;
+esac
$cat <<EOM
-Some kernels have a bug that prevents setuid #! scripts from being
-secure. Some sites have disabled setuid #! scripts because of this.
-
-First let's decide if your kernel supports secure setuid #! scripts.
-(If setuid #! scripts would be secure but have been disabled anyway,
-don't say that they are secure if asked.)
-
-EOM
-
-val="$undef"
-if $test -d /dev/fd; then
- echo "#!$ls" >reflect
- chmod +x,u+s reflect
- ./reflect >flect 2>&1
- if $contains "/dev/fd" flect >/dev/null; then
- echo "Congratulations, your kernel has secure setuid scripts!" >&4
- val="$define"
- else
- $cat <<EOM
-If you are not sure if they are secure, I can check but I'll need a
-username and password different from the one you are using right now.
-If you don't have such a username or don't want me to test, simply
-enter 'none'.
+By default, $package will be installed in $dflt/bin, manual pages
+under $dflt/man, etc..., i.e. with $dflt as prefix for all
+installation directories. Typically this is something like /usr/local.
+If you wish to have binaries under /usr/bin but other parts of the
+installation under /usr/local, that's ok: you will be prompted
+separately for each of the installation directories, the prefix being
+only used to set the defaults.
EOM
- rp='Other username to test security of setuid scripts with?'
- dflt='none'
- . ./myread
- case "$ans" in
- n|none)
- case "$d_suidsafe" in
- '') echo "I'll assume setuid scripts are *not* secure." >&4
- dflt=n;;
- "$undef")
- echo "Well, the $hint value is *not* secure." >&4
- dflt=n;;
- *) echo "Well, the $hint value *is* secure." >&4
- dflt=y;;
- esac
- ;;
- *)
- $rm -f reflect flect
- echo "#!$ls" >reflect
- chmod +x,u+s reflect
- echo >flect
- chmod a+w flect
- echo '"su" will (probably) prompt you for '"$ans's password."
- su $ans -c './reflect >flect'
- if $contains "/dev/fd" flect >/dev/null; then
- echo "Okay, it looks like setuid scripts are secure." >&4
- dflt=y
- else
- echo "I don't think setuid scripts are secure." >&4
- dflt=n
- fi
- ;;
- esac
- rp='Does your kernel have *secure* setuid scripts?'
- . ./myread
- case "$ans" in
- [yY]*) val="$define";;
- *) val="$undef";;
- esac
- fi
-else
- echo "I don't think setuid scripts are secure (no /dev/fd directory)." >&4
- echo "(That's for file descriptors, not floppy disks.)"
- val="$undef"
-fi
-set d_suidsafe
-eval $setvar
-
-$rm -f reflect flect
-
-: now see if they want to do setuid emulation
-echo " "
-val="$undef"
-case "$d_suidsafe" in
-"$define")
- val="$undef"
- echo "No need to emulate SUID scripts since they are secure here." >& 4
- ;;
+fn=d~
+rp='Installation prefix to use?'
+. ./getfile
+oldprefix=''
+case "$prefix" in
+'') ;;
*)
- $cat <<EOM
-Some systems have disabled setuid scripts, especially systems where
-setuid scripts cannot be secure. On systems where setuid scripts have
-been disabled, the setuid/setgid bits on scripts are currently
-useless. It is possible for $package to detect those bits and emulate
-setuid/setgid in a secure fashion. This emulation will only work if
-setuid scripts have been disabled in your kernel.
-
-EOM
- case "$d_dosuid" in
- "$define") dflt=y ;;
- *) dflt=n ;;
- esac
- rp="Do you want to do setuid/setgid emulation?"
- . ./myread
- case "$ans" in
- [yY]*) val="$define";;
- *) val="$undef";;
+ case "$ans" in
+ "$prefix") ;;
+ *) oldprefix="$prefix";;
esac
;;
esac
-set d_dosuid
-eval $setvar
+prefix="$ans"
+prefixexp="$ansexp"
-: determine filename position in cpp output
+: is AFS running?
echo " "
-echo "Computing filename position in cpp output for #include directives..." >&4
-echo '#include <stdio.h>' > foo.c
-$cat >fieldn <<EOF
-$startsh
-$cppstdin $cppflags $cppminus <foo.c 2>/dev/null | \
-$grep '^[ ]*#.*stdio\.h' | \
-while read cline; do
- pos=1
- set \$cline
- while $test \$# -gt 0; do
- if $test -r \`echo \$1 | $tr -d '"'\`; then
- echo "\$pos"
- exit 0
- fi
- shift
- pos=\`expr \$pos + 1\`
- done
-done
-EOF
-chmod +x fieldn
-fieldn=`./fieldn`
-$rm -f foo.c fieldn
-case $fieldn in
-'') pos='???';;
-1) pos=first;;
-2) pos=second;;
-3) pos=third;;
-*) pos="${fieldn}th";;
-esac
-echo "Your cpp writes the filename in the $pos field of the line."
-
-: locate header file
-$cat >findhdr <<EOF
-$startsh
-wanted=\$1
-name=''
-for usrincdir in $usrinc
-do
- if test -f \$usrincdir/\$wanted; then
- echo "\$usrincdir/\$wanted"
- exit 0
+case "$afs" in
+$define|true) afs=true ;;
+$undef|false) afs=false ;;
+*) if test -d /afs; then
+ afs=true
+ else
+ afs=false
fi
-done
-awkprg='{ print \$$fieldn }'
-echo "#include <\$wanted>" > foo\$\$.c
-$cppstdin $cppminus $cppflags < foo\$\$.c 2>/dev/null | \
-$grep "^[ ]*#.*\$wanted" | \
-while read cline; do
- name=\`echo \$cline | $awk "\$awkprg" | $tr -d '"'\`
- case "\$name" in
- *[/\\\\]\$wanted) echo "\$name"; exit 1;;
- *[\\\\/]\$wanted) echo "\$name"; exit 1;;
- *) exit 2;;
- esac;
-done;
-#
-# status = 0: grep returned 0 lines, case statement not executed
-# status = 1: headerfile found
-# status = 2: while loop executed, no headerfile found
-#
-status=\$?
-$rm -f foo\$\$.c;
-if test \$status -eq 1; then
- exit 0;
+ ;;
+esac
+if $afs; then
+ echo "AFS may be running... I'll be extra cautious then..." >&4
+else
+ echo "AFS does not seem to be running..." >&4
fi
-exit 1
-EOF
-chmod +x findhdr
-: define an alternate in-header-list? function
-inhdr='echo " "; td=$define; tu=$undef; yyy=$@;
-cont=true; xxf="echo \"<\$1> found.\" >&4";
-case $# in 2) xxnf="echo \"<\$1> NOT found.\" >&4";;
-*) xxnf="echo \"<\$1> NOT found, ...\" >&4";;
-esac;
-case $# in 4) instead=instead;; *) instead="at last";; esac;
-while $test "$cont"; do
- xxx=`./findhdr $1`
- var=$2; eval "was=\$$2";
- if $test "$xxx" && $test -r "$xxx";
- then eval $xxf;
- eval "case \"\$$var\" in $undef) . ./whoa; esac"; eval "$var=\$td";
- cont="";
- else eval $xxnf;
- eval "case \"\$$var\" in $define) . ./whoa; esac"; eval "$var=\$tu"; fi;
- set $yyy; shift; shift; yyy=$@;
- case $# in 0) cont="";;
- 2) xxf="echo \"but I found <\$1> $instead.\" >&4";
- xxnf="echo \"and I did not find <\$1> either.\" >&4";;
- *) xxf="echo \"but I found <\$1\> instead.\" >&4";
- xxnf="echo \"there is no <\$1>, ...\" >&4";;
- esac;
-done;
-while $test "$yyy";
-do set $yyy; var=$2; eval "was=\$$2";
- eval "case \"\$$var\" in $define) . ./whoa; esac"; eval "$var=\$tu";
- set $yyy; shift; shift; yyy=$@;
-done'
+: determine installation prefix for where package is to be installed.
+if $afs; then
+$cat <<EOM
-: see if this is a malloc.h system
-set malloc.h i_malloc
-eval $inhdr
+Since you are running AFS, I need to distinguish the directory in which
+files will reside from the directory in which they are installed (and from
+which they are presumably copied to the former directory by occult means).
-: see if stdlib is available
-set stdlib.h i_stdlib
-eval $inhdr
+EOM
+ case "$installprefix" in
+ '') dflt=`echo $prefix | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installprefix";;
+ esac
+else
+$cat <<EOM
-: determine which malloc to compile in
-echo " "
-case "$usemymalloc" in
-''|[yY]*|true|$define) dflt='y' ;;
-*) dflt='n' ;;
-esac
-rp="Do you wish to attempt to use the malloc that comes with $package?"
-. ./myread
-usemymalloc="$ans"
-case "$ans" in
-y*|true)
- usemymalloc='y'
- mallocsrc='malloc.c'
- mallocobj="malloc$_o"
- d_mymalloc="$define"
- case "$libs" in
- *-lmalloc*)
- : Remove malloc from list of libraries to use
- echo "Removing unneeded -lmalloc from library list" >&4
- set `echo X $libs | $sed -e 's/-lmalloc / /' -e 's/-lmalloc$//'`
- shift
- libs="$*"
- echo "libs = $libs" >&4
- ;;
+In some special cases, particularly when building $package for distribution,
+it is convenient to distinguish between the directory in which files should
+be installed from the directory ($prefix) in which they
+will eventually reside. For most users, these two directories are the same.
+
+EOM
+ case "$installprefix" in
+ '') dflt=$prefix ;;
+ *) dflt=$installprefix;;
esac
- ;;
+fi
+fn=d~
+rp='What installation prefix should I use for installing files?'
+. ./getfile
+installprefix="$ans"
+installprefixexp="$ansexp"
+
+: set the prefixit variable, to compute a suitable default value
+prefixit='case "$3" in
+""|none)
+ case "$oldprefix" in
+ "") eval "$1=\"\$$2\"";;
+ *)
+ case "$3" in
+ "") eval "$1=";;
+ none)
+ eval "tp=\"\$$2\"";
+ case "$tp" in
+ ""|" ") eval "$1=\"\$$2\"";;
+ *) eval "$1=";;
+ esac;;
+ esac;;
+ esac;;
*)
- usemymalloc='n'
- mallocsrc=''
- mallocobj=''
- d_mymalloc="$undef"
- ;;
-esac
+ eval "tp=\"$oldprefix-\$$2-\""; eval "tp=\"$tp\"";
+ case "$tp" in
+ --|/*--|\~*--) eval "$1=\"$prefix/$3\"";;
+ /*-$oldprefix/*|\~*-$oldprefix/*)
+ eval "$1=\`echo \$$2 | sed \"s,^$oldprefix,$prefix,\"\`";;
+ *) eval "$1=\"\$$2\"";;
+ esac;;
+esac'
-: compute the return types of malloc and free
+
+: get the patchlevel
echo " "
-$cat >malloc.c <<END
-#$i_malloc I_MALLOC
-#$i_stdlib I_STDLIB
-#include <stdio.h>
-#include <sys/types.h>
-#ifdef I_MALLOC
-#include <malloc.h>
-#endif
-#ifdef I_STDLIB
-#include <stdlib.h>
-#endif
-#ifdef TRY_MALLOC
-void *malloc();
-#endif
-#ifdef TRY_FREE
-void free();
-#endif
-END
-case "$malloctype" in
-'')
- if $cc $ccflags -c -DTRY_MALLOC malloc.c >/dev/null 2>&1; then
- malloctype='void *'
- else
- malloctype='char *'
- fi
+echo "Getting the current patchlevel..." >&4
+if $test -r $rsrc/patchlevel.h;then
+ revision=`awk '/define[ ]+PERL_REVISION/ {print $3}' $rsrc/patchlevel.h`
+ patchlevel=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
+ subversion=`awk '/define[ ]+PERL_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
+ api_revision=`awk '/define[ ]+PERL_API_REVISION/ {print $3}' $rsrc/patchlevel.h`
+ api_version=`awk '/define[ ]+PERL_API_VERSION/ {print $3}' $rsrc/patchlevel.h`
+ api_subversion=`awk '/define[ ]+PERL_API_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
+else
+ revision=0
+ patchlevel=0
+ subversion=0
+ api_revision=0
+ api_version=0
+ api_subversion=0
+fi
+$echo "(You have $package version $patchlevel subversion $subversion.)"
+case "$osname" in
+dos|vms)
+ : XXX Should be a Configure test for double-dots in filenames.
+ version=`echo $revision $patchlevel $subversion | \
+ $awk '{ printf "%d_%d_%d\n", $1, $2, $3 }'`
+ api_versionstring=`echo $api_revision $api_version $api_subversion | \
+ $awk '{ printf "%d_%d_%d\n", $1, $2, $3 }'`
+ ;;
+*)
+ version=`echo $revision $patchlevel $subversion | \
+ $awk '{ printf "%d.%d.%d\n", $1, $2, $3 }'`
+ api_versionstring=`echo $api_revision $api_version $api_subversion | \
+ $awk '{ printf "%d.%d.%d\n", $1, $2, $3 }'`
;;
esac
-echo "Your system wants malloc to return '$malloctype', it would seem." >&4
+: Special case the 5.005_xx maintenance series, which used 5.005
+: without any subversion label as a subdirectory in $sitelib
+if test "${api_revision}${api_version}${api_subversion}" = "550"; then
+ api_versionstring='5.005'
+fi
-case "$freetype" in
-'')
- if $cc $ccflags -c -DTRY_FREE malloc.c >/dev/null 2>&1; then
- freetype='void'
- else
- freetype='int'
- fi
+: determine installation style
+: For now, try to deduce it from prefix unless it is already set.
+: Reproduce behavior of 5.005 and earlier, maybe drop that in 5.7.
+case "$installstyle" in
+'') case "$prefix" in
+ *perl*) dflt='lib';;
+ *) dflt='lib/perl5' ;;
+ esac
;;
+*) dflt="$installstyle" ;;
esac
-echo "Your system uses $freetype free(), it would seem." >&4
-$rm -f malloc.[co]
+: Probably not worth prompting for this since we prompt for all
+: the directories individually, and the prompt would be too long and
+: confusing anyway.
+installstyle=$dflt
+
+: determine where private library files go
+: Usual default is /usr/local/lib/perl5/$version.
+: Also allow things like /opt/perl/lib/$version, since
+: /opt/perl/lib/perl5... would be redundant.
+: The default "style" setting is made in installstyle.U
+case "$installstyle" in
+*lib/perl5*) set dflt privlib lib/$package/$version ;;
+*) set dflt privlib lib/$version ;;
+esac
+eval $prefixit
$cat <<EOM
-The installation process will also create a directory for
-vendor-supplied add-ons. Vendors who supply perl with their system
-may find it convenient to place all vendor-supplied files in this
-directory rather than in the main distribution directory. This will
-ease upgrades between binary-compatible maintenance versions of perl.
+There are some auxiliary files for $package that need to be put into a
+private library directory that is accessible by everyone.
-Of course you may also use these directories in whatever way you see
-fit. For example, you might use them to access modules shared over a
-company-wide network.
+EOM
+fn=d~+
+rp='Pathname where the private library files will reside?'
+. ./getfile
+privlib="$ans"
+privlibexp="$ansexp"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installprivlib=`echo $privlibexp | sed "s#^$prefix#$installprefix#"`
+else
+ installprivlib="$privlibexp"
+fi
-The default answer should be fine for most people.
-This causes further questions about vendor add-ons to be skipped
-and no vendor-specific directories will be configured for perl.
+: set the prefixup variable, to restore leading tilda escape
+prefixup='case "$prefixexp" in
+"$prefix") ;;
+*) eval "$1=\`echo \$$1 | sed \"s,^$prefixexp,$prefix,\"\`";;
+esac'
-EOM
-rp='Do you want to configure vendor-specific add-on directories?'
-case "$usevendorprefix" in
-define|true|[yY]*) dflt=y ;;
-*) : User may have set vendorprefix directly on Configure command line.
- case "$vendorprefix" in
- ''|' ') dflt=n ;;
- *) dflt=y ;;
- esac
+: determine where public architecture dependent libraries go
+set archlib archlib
+eval $prefixit
+: privlib default is /usr/local/lib/$package/$version
+: archlib default is /usr/local/lib/$package/$version/$archname
+: privlib may have an optional trailing /share.
+tdflt=`echo $privlib | $sed 's,/share$,,'`
+tdflt=$tdflt/$archname
+case "$archlib" in
+'') dflt=$tdflt
;;
+*) dflt="$archlib"
+ ;;
esac
-. ./myread
-case "$ans" in
-[yY]*) fn=d~+
- rp='Installation prefix to use for vendor-supplied add-ons?'
- case "$vendorprefix" in
- '') dflt='' ;;
- *) dflt=$vendorprefix ;;
+$cat <<EOM
+
+$spackage contains architecture-dependent library files. If you are
+sharing libraries in a heterogeneous environment, you might store
+these files in a separate location. Otherwise, you can just include
+them with the rest of the public library files.
+
+EOM
+fn=d+~
+rp='Where do you want to put the public architecture-dependent libraries?'
+. ./getfile
+archlib="$ans"
+archlibexp="$ansexp"
+if $test X"$archlib" = X"$privlib"; then
+ d_archlib="$undef"
+else
+ d_archlib="$define"
+fi
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installarchlib=`echo $archlibexp | sed "s#^$prefix#$installprefix#"`
+else
+ installarchlib="$archlibexp"
+fi
+
+
+: Binary compatibility with 5.005 is not possible for builds
+: with advanced features
+case "$usethreads$usemultiplicity" in
+*define*)
+ bincompat5005="$undef"
+ d_bincompat5005="$undef"
+ ;;
+*) $cat <<EOM
+
+This version of Perl can be compiled for binary compatibility with 5.005.
+If you decide to do so, you will be able to continue using most of the
+extensions that were compiled for Perl 5.005.
+
+EOM
+ case "$bincompat5005$d_bincompat5005" in
+ *"$undef"*) dflt=n ;;
+ *) dflt=y ;;
esac
- . ./getfile
- : XXX Prefixit unit does not yet support siteprefix and vendorprefix
- oldvendorprefix=''
- case "$vendorprefix" in
- '') ;;
- *) case "$ans" in
- "$prefix") ;;
- *) oldvendorprefix="$prefix";;
- esac
+ rp='Binary compatibility with Perl 5.005?'
+ . ./myread
+ case "$ans" in
+ y*) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ set d_bincompat5005
+ eval $setvar
+ case "$d_bincompat5005" in
+ "$define")
+ bincompat5005="$define"
+ ;;
+ *) bincompat5005="$undef"
+ d_bincompat5005="$undef"
;;
esac
- usevendorprefix="$define"
- vendorprefix="$ans"
- vendorprefixexp="$ansexp"
- ;;
-*) usevendorprefix="$undef"
- vendorprefix=''
- vendorprefixexp=''
;;
esac
-case "$vendorprefix" in
-'') d_vendorlib="$undef"
- vendorlib=''
- vendorlibexp=''
- ;;
-*) d_vendorlib="$define"
- : determine where vendor-supplied modules go.
- : Usual default is /usr/local/lib/perl5/vendor_perl/$version
- case "$vendorlib" in
- '')
- prog=`echo $package | $sed 's/-*[0-9.]*$//'`
- case "$installstyle" in
- *lib/perl5*) dflt=$vendorprefix/lib/$package/vendor_$prog/$version ;;
- *) dflt=$vendorprefix/lib/vendor_$prog/$version ;;
+
+: see if setuid scripts can be secure
+$cat <<EOM
+
+Some kernels have a bug that prevents setuid #! scripts from being
+secure. Some sites have disabled setuid #! scripts because of this.
+
+First let's decide if your kernel supports secure setuid #! scripts.
+(If setuid #! scripts would be secure but have been disabled anyway,
+don't say that they are secure if asked.)
+
+EOM
+
+val="$undef"
+if $test -d /dev/fd; then
+ echo "#!$ls" >reflect
+ chmod +x,u+s reflect
+ ./reflect >flect 2>&1
+ if $contains "/dev/fd" flect >/dev/null; then
+ echo "Congratulations, your kernel has secure setuid scripts!" >&4
+ val="$define"
+ else
+ $cat <<EOM
+If you are not sure if they are secure, I can check but I'll need a
+username and password different from the one you are using right now.
+If you don't have such a username or don't want me to test, simply
+enter 'none'.
+
+EOM
+ rp='Other username to test security of setuid scripts with?'
+ dflt='none'
+ . ./myread
+ case "$ans" in
+ n|none)
+ case "$d_suidsafe" in
+ '') echo "I'll assume setuid scripts are *not* secure." >&4
+ dflt=n;;
+ "$undef")
+ echo "Well, the $hint value is *not* secure." >&4
+ dflt=n;;
+ *) echo "Well, the $hint value *is* secure." >&4
+ dflt=y;;
+ esac
+ ;;
+ *)
+ $rm -f reflect flect
+ echo "#!$ls" >reflect
+ chmod +x,u+s reflect
+ echo >flect
+ chmod a+w flect
+ echo '"su" will (probably) prompt you for '"$ans's password."
+ su $ans -c './reflect >flect'
+ if $contains "/dev/fd" flect >/dev/null; then
+ echo "Okay, it looks like setuid scripts are secure." >&4
+ dflt=y
+ else
+ echo "I don't think setuid scripts are secure." >&4
+ dflt=n
+ fi
+ ;;
+ esac
+ rp='Does your kernel have *secure* setuid scripts?'
+ . ./myread
+ case "$ans" in
+ [yY]*) val="$define";;
+ *) val="$undef";;
esac
- ;;
- *) dflt="$vendorlib"
- ;;
- esac
- fn=d~+
- rp='Pathname for the vendor-supplied library files?'
- . ./getfile
- vendorlib="$ans"
- vendorlibexp="$ansexp"
- ;;
-esac
-vendorlib_stem=`echo "$vendorlibexp" | sed "s,/$version$,,"`
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorlib=`echo $vendorlibexp | $sed "s#^$prefix#$installprefix#"`
+ fi
else
- installvendorlib="$vendorlibexp"
+ echo "I don't think setuid scripts are secure (no /dev/fd directory)." >&4
+ echo "(That's for file descriptors, not floppy disks.)"
+ val="$undef"
fi
+set d_suidsafe
+eval $setvar
-case "$vendorprefix" in
-'') d_vendorarch="$undef"
- vendorarch=''
- vendorarchexp=''
+$rm -f reflect flect
+
+: now see if they want to do setuid emulation
+echo " "
+val="$undef"
+case "$d_suidsafe" in
+"$define")
+ val="$undef"
+ echo "No need to emulate SUID scripts since they are secure here." >& 4
;;
-*) d_vendorarch="$define"
- : determine where vendor-supplied architecture-dependent libraries go.
- : vendorlib default is /usr/local/lib/perl5/vendor_perl/$version
- : vendorarch default is /usr/local/lib/perl5/vendor_perl/$version/$archname
- : vendorlib may have an optional trailing /share.
- case "$vendorarch" in
- '') dflt=`echo $vendorlib | $sed 's,/share$,,'`
- dflt="$dflt/$archname"
- ;;
- *) dflt="$vendorarch" ;;
+*)
+ $cat <<EOM
+Some systems have disabled setuid scripts, especially systems where
+setuid scripts cannot be secure. On systems where setuid scripts have
+been disabled, the setuid/setgid bits on scripts are currently
+useless. It is possible for $package to detect those bits and emulate
+setuid/setgid in a secure fashion. This emulation will only work if
+setuid scripts have been disabled in your kernel.
+
+EOM
+ case "$d_dosuid" in
+ "$define") dflt=y ;;
+ *) dflt=n ;;
+ esac
+ rp="Do you want to do setuid/setgid emulation?"
+ . ./myread
+ case "$ans" in
+ [yY]*) val="$define";;
+ *) val="$undef";;
esac
- fn=d~+
- rp='Pathname for vendor-supplied architecture-dependent files?'
- . ./getfile
- vendorarch="$ans"
- vendorarchexp="$ansexp"
;;
esac
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorarch=`echo $vendorarchexp | sed "s#^$prefix#$installprefix#"`
-else
- installvendorarch="$vendorarchexp"
-fi
-
-: Cruising for prototypes
-echo " "
-echo "Checking out function prototypes..." >&4
-$cat >prototype.c <<'EOCP'
-int main(int argc, char *argv[]) {
- exit(0);}
-EOCP
-if $cc $ccflags -c prototype.c >prototype.out 2>&1 ; then
- echo "Your C compiler appears to support function prototypes."
- val="$define"
-else
- echo "Your C compiler doesn't seem to understand function prototypes."
- val="$undef"
-fi
-set prototype
+set d_dosuid
eval $setvar
-$rm -f prototype*
-case "$prototype" in
-"$define") ;;
-*) ansi2knr='ansi2knr'
- echo " "
- cat <<EOM >&4
+: determine filename position in cpp output
+echo " "
+echo "Computing filename position in cpp output for #include directives..." >&4
+echo '#include <stdio.h>' > foo.c
+$cat >fieldn <<EOF
+$startsh
+$cppstdin $cppflags $cppminus <foo.c 2>/dev/null | \
+$grep '^[ ]*#.*stdio\.h' | \
+while read cline; do
+ pos=1
+ set \$cline
+ while $test \$# -gt 0; do
+ if $test -r \`echo \$1 | $tr -d '"'\`; then
+ echo "\$pos"
+ exit 0
+ fi
+ shift
+ pos=\`expr \$pos + 1\`
+ done
+done
+EOF
+chmod +x fieldn
+fieldn=`./fieldn`
+$rm -f foo.c fieldn
+case $fieldn in
+'') pos='???';;
+1) pos=first;;
+2) pos=second;;
+3) pos=third;;
+*) pos="${fieldn}th";;
+esac
+echo "Your cpp writes the filename in the $pos field of the line."
-$me: FATAL ERROR:
-This version of $package can only be compiled by a compiler that
-understands function prototypes. Unfortunately, your C compiler
- $cc $ccflags
-doesn't seem to understand them. Sorry about that.
+: locate header file
+$cat >findhdr <<EOF
+$startsh
+wanted=\$1
+name=''
+for usrincdir in $usrinc
+do
+ if test -f \$usrincdir/\$wanted; then
+ echo "\$usrincdir/\$wanted"
+ exit 0
+ fi
+done
+awkprg='{ print \$$fieldn }'
+echo "#include <\$wanted>" > foo\$\$.c
+$cppstdin $cppminus $cppflags < foo\$\$.c 2>/dev/null | \
+$grep "^[ ]*#.*\$wanted" | \
+while read cline; do
+ name=\`echo \$cline | $awk "\$awkprg" | $tr -d '"'\`
+ case "\$name" in
+ *[/\\\\]\$wanted) echo "\$name"; exit 1;;
+ *[\\\\/]\$wanted) echo "\$name"; exit 1;;
+ *) exit 2;;
+ esac;
+done;
+#
+# status = 0: grep returned 0 lines, case statement not executed
+# status = 1: headerfile found
+# status = 2: while loop executed, no headerfile found
+#
+status=\$?
+$rm -f foo\$\$.c;
+if test \$status -eq 1; then
+ exit 0;
+fi
+exit 1
+EOF
+chmod +x findhdr
-If GNU cc is available for your system, perhaps you could try that instead.
+: define an alternate in-header-list? function
+inhdr='echo " "; td=$define; tu=$undef; yyy=$@;
+cont=true; xxf="echo \"<\$1> found.\" >&4";
+case $# in 2) xxnf="echo \"<\$1> NOT found.\" >&4";;
+*) xxnf="echo \"<\$1> NOT found, ...\" >&4";;
+esac;
+case $# in 4) instead=instead;; *) instead="at last";; esac;
+while $test "$cont"; do
+ xxx=`./findhdr $1`
+ var=$2; eval "was=\$$2";
+ if $test "$xxx" && $test -r "$xxx";
+ then eval $xxf;
+ eval "case \"\$$var\" in $undef) . ./whoa; esac"; eval "$var=\$td";
+ cont="";
+ else eval $xxnf;
+ eval "case \"\$$var\" in $define) . ./whoa; esac"; eval "$var=\$tu"; fi;
+ set $yyy; shift; shift; yyy=$@;
+ case $# in 0) cont="";;
+ 2) xxf="echo \"but I found <\$1> $instead.\" >&4";
+ xxnf="echo \"and I did not find <\$1> either.\" >&4";;
+ *) xxf="echo \"but I found <\$1\> instead.\" >&4";
+ xxnf="echo \"there is no <\$1>, ...\" >&4";;
+ esac;
+done;
+while $test "$yyy";
+do set $yyy; var=$2; eval "was=\$$2";
+ eval "case \"\$$var\" in $define) . ./whoa; esac"; eval "$var=\$tu";
+ set $yyy; shift; shift; yyy=$@;
+done'
-Eventually, we hope to support building Perl with pre-ANSI compilers.
-If you would like to help in that effort, please contact <perlbug@perl.org>.
+: see if this is a malloc.h system
+set malloc.h i_malloc
+eval $inhdr
-Aborting Configure now.
-EOM
- exit 2
- ;;
-esac
+: see if stdlib is available
+set stdlib.h i_stdlib
+eval $inhdr
-: determine where public executables go
+: determine which malloc to compile in
echo " "
-set dflt bin bin
-eval $prefixit
-fn=d~
-rp='Pathname where the public executables will reside?'
-. ./getfile
-if $test "X$ansexp" != "X$binexp"; then
- installbin=''
-fi
-bin="$ans"
-binexp="$ansexp"
-: Change installation prefix, if necessary.
-: XXX Bug? -- ignores Configure -Dinstallprefix setting.
-if $test X"$prefix" != X"$installprefix"; then
- installbin=`echo $binexp | sed "s#^$prefix#$installprefix#"`
-else
- installbin="$binexp"
-fi
-
-: Find perl5.005 or later.
-echo "Looking for a previously installed perl5.005 or later... "
-case "$perl5" in
-'') for tdir in `echo "$binexp:$PATH" | $sed "s/$path_sep/ /g"`; do
- : Check if this perl is recent and can load a simple module
- if $test -x $tdir/perl && $tdir/perl -Mless -e 'use 5.005;' >/dev/null 2>&1; then
- perl5=$tdir/perl
- break;
- elif $test -x $tdir/perl5 && $tdir/perl5 -Mless -e 'use 5.005;' >/dev/null 2>&1; then
- perl5=$tdir/perl
- break;
- fi
- done
+case "$usemymalloc" in
+''|[yY]*|true|$define) dflt='y' ;;
+*) dflt='n' ;;
+esac
+rp="Do you wish to attempt to use the malloc that comes with $package?"
+. ./myread
+usemymalloc="$ans"
+case "$ans" in
+y*|true)
+ usemymalloc='y'
+ mallocsrc='malloc.c'
+ mallocobj="malloc$_o"
+ d_mymalloc="$define"
+ case "$libs" in
+ *-lmalloc*)
+ : Remove malloc from list of libraries to use
+ echo "Removing unneeded -lmalloc from library list" >&4
+ set `echo X $libs | $sed -e 's/-lmalloc / /' -e 's/-lmalloc$//'`
+ shift
+ libs="$*"
+ echo "libs = $libs" >&4
+ ;;
+ esac
;;
-*) perl5="$perl5"
+*)
+ usemymalloc='n'
+ mallocsrc=''
+ mallocobj=''
+ d_mymalloc="$undef"
;;
esac
-case "$perl5" in
-'') echo "None found. That's ok.";;
-*) echo "Using $perl5." ;;
+
+: compute the return types of malloc and free
+echo " "
+$cat >malloc.c <<END
+#$i_malloc I_MALLOC
+#$i_stdlib I_STDLIB
+#include <stdio.h>
+#include <sys/types.h>
+#ifdef I_MALLOC
+#include <malloc.h>
+#endif
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+#ifdef TRY_MALLOC
+void *malloc();
+#endif
+#ifdef TRY_FREE
+void free();
+#endif
+END
+case "$malloctype" in
+'')
+ if $cc $ccflags -c -DTRY_MALLOC malloc.c >/dev/null 2>&1; then
+ malloctype='void *'
+ else
+ malloctype='char *'
+ fi
+ ;;
esac
+echo "Your system wants malloc to return '$malloctype', it would seem." >&4
+case "$freetype" in
+'')
+ if $cc $ccflags -c -DTRY_FREE malloc.c >/dev/null 2>&1; then
+ freetype='void'
+ else
+ freetype='int'
+ fi
+ ;;
+esac
+echo "Your system uses $freetype free(), it would seem." >&4
+$rm -f malloc.[co]
$cat <<EOM
After $package is installed, you may wish to install various
The installation process will create a directory for
site-specific extensions and modules. Most users find it convenient
to place all site-specific files in this directory rather than in the
-main distribution directory.
-
-EOM
-fn=d~+
-rp='Pathname for the site-specific library files?'
-. ./getfile
-sitelib="$ans"
-sitelibexp="$ansexp"
-sitelib_stem=`echo "$sitelibexp" | sed "s,/$version$,,"`
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitelib=`echo $sitelibexp | $sed "s#^$prefix#$installprefix#"`
-else
- installsitelib="$sitelibexp"
-fi
-
-: Determine list of previous versions to include in @INC
-$cat > getverlist <<EOPL
-#!$perl5 -w
-use File::Basename;
-\$api_versionstring = "$api_versionstring";
-\$version = "$version";
-\$stem = "$sitelib_stem";
-\$archname = "$archname";
-EOPL
- $cat >> getverlist <<'EOPL'
-# Can't have leading @ because metaconfig interprets it as a command!
-;@inc_version_list=();
-# XXX Redo to do opendir/readdir?
-if (-d $stem) {
- chdir($stem);
- ;@candidates = glob("5.*");
-}
-else {
- ;@candidates = ();
-}
-
-# XXX ToDo: These comparisons must be reworked when two-digit
-# subversions come along, so that 5.7.10 compares as greater than
-# 5.7.3! By that time, hope that 5.6.x is sufficiently
-# widespread that we can use the built-in version vectors rather
-# than reinventing them here. For 5.6.0, however, we must
-# assume this script will likely be run by 5.005_0x. --AD 1/2000.
-foreach $d (@candidates) {
- if ($d lt $version) {
- if ($d ge $api_versionstring) {
- unshift(@inc_version_list, grep { -d } "$d/$archname", $d);
- }
- elsif ($d ge "5.005") {
- unshift(@inc_version_list, grep { -d } $d);
- }
- }
- else {
- # Skip newer version. I.e. don't look in
- # 5.7.0 if we're installing 5.6.1.
- }
-}
-
-if (@inc_version_list) {
- print join(' ', @inc_version_list);
-}
-else {
- # Blank space to preserve value for next Configure run.
- print " ";
-}
-EOPL
-chmod +x getverlist
-case "$inc_version_list" in
-'') if test -x "$perl5"; then
- dflt=`$perl5 getverlist`
- else
- dflt='none'
- fi
- ;;
-$undef) dflt='none' ;;
-*) dflt="$inc_version_list" ;;
-esac
-case "$dflt" in
-''|' ') dflt=none ;;
-esac
-$cat <<'EOM'
-
-In order to ease the process of upgrading, this version of perl
-can be configured to use modules built and installed with earlier
-versions of perl that were installed under $prefix. Specify here
-the list of earlier versions that this version of perl should check.
-If Configure detected no earlier versions of perl installed under
-$prefix, then the list will be empty. Answer 'none' to tell perl
-to not search earlier versions.
-
-The default should almost always be sensible, so if you're not sure,
-just accept the default.
-EOM
-
-rp='List of earlier versions to include in @INC?'
-. ./myread
-case "$ans" in
-[Nn]one|''|' ') inc_version_list=' ' ;;
-*) inc_version_list="$ans" ;;
-esac
-case "$inc_version_list" in
-''|' ')
- inc_version_list_init='0';;
-*) inc_version_list_init=`echo $inc_version_list |
- $sed -e 's/^/"/' -e 's/ /","/g' -e 's/$/",0/'`
- ;;
-esac
-$rm -f getverlist
-
-: determine whether to install perl also as /usr/bin/perl
-
-echo " "
-if $test -d /usr/bin -a "X$installbin" != X/usr/bin; then
- $cat <<EOM
-Many scripts expect perl to be installed as /usr/bin/perl.
-I can install the perl you are about to compile also as /usr/bin/perl
-(in addition to $installbin/perl).
-EOM
- case "$installusrbinperl" in
- "$undef"|[nN]*) dflt='n';;
- *) dflt='y';;
- esac
- rp="Do you want to install perl as /usr/bin/perl?"
- . ./myread
- case "$ans" in
- [yY]*) val="$define";;
- *) val="$undef" ;;
- esac
-else
- val="$undef"
-fi
-set installusrbinperl
-eval $setvar
-
-echo " "
-echo "Checking for GNU C Library..." >&4
-cat >gnulibc.c <<EOM
-#include <stdio.h>
-int main()
-{
-#ifdef __GLIBC__
- exit(0);
-#else
- exit(1);
-#endif
-}
-EOM
-set gnulibc
-if eval $compile_ok && ./gnulibc; then
- val="$define"
- echo "You are using the GNU C Library"
-else
- val="$undef"
- echo "You are not using the GNU C Library"
-fi
-$rm -f gnulibc*
-set d_gnulibc
-eval $setvar
-
-: see if nm is to be used to determine whether a symbol is defined or not
-case "$usenm" in
-'')
- dflt=''
- case "$d_gnulibc" in
- "$define")
- echo " "
- echo "nm probably won't work on the GNU C Library." >&4
- dflt=n
- ;;
- esac
- case "$dflt" in
- '')
- if $test "$osname" = aix -a ! -f /lib/syscalls.exp; then
- echo " "
- echo "Whoops! This is an AIX system without /lib/syscalls.exp!" >&4
- echo "'nm' won't be sufficient on this sytem." >&4
- dflt=n
- fi
- ;;
- esac
- case "$dflt" in
- '') dflt=`$egrep 'inlibc|csym' $rsrc/Configure | wc -l 2>/dev/null`
- if $test $dflt -gt 20; then
- dflt=y
- else
- dflt=n
- fi
- ;;
- esac
+main distribution directory.
+
+EOM
+fn=d~+
+rp='Pathname for the site-specific library files?'
+. ./getfile
+sitelib="$ans"
+sitelibexp="$ansexp"
+sitelib_stem=`echo "$sitelibexp" | sed "s,/$version$,,"`
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitelib=`echo $sitelibexp | $sed "s#^$prefix#$installprefix#"`
+else
+ installsitelib="$sitelibexp"
+fi
+
+: determine where site specific architecture-dependent libraries go.
+: sitelib default is /usr/local/lib/perl5/site_perl/$version
+: sitearch default is /usr/local/lib/perl5/site_perl/$version/$archname
+: sitelib may have an optional trailing /share.
+case "$sitearch" in
+'') dflt=`echo $sitelib | $sed 's,/share$,,'`
+ dflt="$dflt/$archname"
;;
-*)
- case "$usenm" in
- true|$define) dflt=y;;
- *) dflt=n;;
- esac
+*) dflt="$sitearch"
;;
esac
+set sitearch sitearch none
+eval $prefixit
$cat <<EOM
-I can use $nm to extract the symbols from your C libraries. This
-is a time consuming task which may generate huge output on the disk (up
-to 3 megabytes) but that should make the symbols extraction faster. The
-alternative is to skip the 'nm' extraction part and to compile a small
-test program instead to determine whether each symbol is present. If
-you have a fast C compiler and/or if your 'nm' output cannot be parsed,
-this may be the best solution.
-
-You probably shouldn't let me use 'nm' if you are using the GNU C Library.
+The installation process will also create a directory for
+architecture-dependent site-specific extensions and modules.
EOM
-rp="Shall I use $nm to extract C symbols from the libraries?"
-. ./myread
-case "$ans" in
-[Nn]*) usenm=false;;
-*) usenm=true;;
-esac
+fn=d~+
+rp='Pathname for the site-specific architecture-dependent library files?'
+. ./getfile
+sitearch="$ans"
+sitearchexp="$ansexp"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitearch=`echo $sitearchexp | sed "s#^$prefix#$installprefix#"`
+else
+ installsitearch="$sitearchexp"
+fi
-runnm=$usenm
-case "$reuseval" in
-true) runnm=false;;
-esac
+$cat <<EOM
-: nm options which may be necessary
-case "$nm_opt" in
-'') if $test -f /mach_boot; then
- nm_opt='' # Mach
- elif $test -d /usr/ccs/lib; then
- nm_opt='-p' # Solaris (and SunOS?)
- elif $test -f /dgux; then
- nm_opt='-p' # DG-UX
- elif $test -f /lib64/rld; then
- nm_opt='-p' # 64-bit Irix
- else
- nm_opt=''
- fi;;
-esac
+The installation process will also create a directory for
+vendor-supplied add-ons. Vendors who supply perl with their system
+may find it convenient to place all vendor-supplied files in this
+directory rather than in the main distribution directory. This will
+ease upgrades between binary-compatible maintenance versions of perl.
-: nm options which may be necessary for shared libraries but illegal
-: for archive libraries. Thank you, Linux.
-case "$nm_so_opt" in
-'') case "$myuname" in
- *linux*)
- if $nm --help | $grep 'dynamic' > /dev/null 2>&1; then
- nm_so_opt='--dynamic'
- fi
- ;;
+Of course you may also use these directories in whatever way you see
+fit. For example, you might use them to access modules shared over a
+company-wide network.
+
+The default answer should be fine for most people.
+This causes further questions about vendor add-ons to be skipped
+and no vendor-specific directories will be configured for perl.
+
+EOM
+rp='Do you want to configure vendor-specific add-on directories?'
+case "$usevendorprefix" in
+define|true|[yY]*) dflt=y ;;
+*) : User may have set vendorprefix directly on Configure command line.
+ case "$vendorprefix" in
+ ''|' ') dflt=n ;;
+ *) dflt=y ;;
esac
;;
esac
-
-case "$runnm" in
-true)
-: get list of predefined functions in a handy place
-echo " "
-case "$libc" in
-'') libc=unknown
- case "$libs" in
- *-lc_s*) libc=`./loc libc_s$_a $libc $libpth`
+. ./myread
+case "$ans" in
+[yY]*) fn=d~+
+ rp='Installation prefix to use for vendor-supplied add-ons?'
+ case "$vendorprefix" in
+ '') dflt='' ;;
+ *) dflt=$vendorprefix ;;
+ esac
+ . ./getfile
+ : XXX Prefixit unit does not yet support siteprefix and vendorprefix
+ oldvendorprefix=''
+ case "$vendorprefix" in
+ '') ;;
+ *) case "$ans" in
+ "$prefix") ;;
+ *) oldvendorprefix="$prefix";;
+ esac
+ ;;
esac
+ usevendorprefix="$define"
+ vendorprefix="$ans"
+ vendorprefixexp="$ansexp"
+ ;;
+*) usevendorprefix="$undef"
+ vendorprefix=''
+ vendorprefixexp=''
;;
esac
-libnames='';
-case "$libs" in
-'') ;;
-*) for thislib in $libs; do
- case "$thislib" in
- -lc|-lc_s)
- : Handle C library specially below.
+
+case "$vendorprefix" in
+'') d_vendorlib="$undef"
+ vendorlib=''
+ vendorlibexp=''
+ ;;
+*) d_vendorlib="$define"
+ : determine where vendor-supplied modules go.
+ : Usual default is /usr/local/lib/perl5/vendor_perl/$version
+ case "$vendorlib" in
+ '')
+ prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+ case "$installstyle" in
+ *lib/perl5*) dflt=$vendorprefix/lib/$package/vendor_$prog/$version ;;
+ *) dflt=$vendorprefix/lib/vendor_$prog/$version ;;
+ esac
;;
- -l*)
- thislib=`echo $thislib | $sed -e 's/^-l//'`
- if try=`./loc lib$thislib.$so.'*' X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib.$so X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib$_a X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc $thislib$_a X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc $thislib X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc Slib$thislib$_a X $xlibpth`; $test -f "$try"; then
- :
- else
- try=''
- fi
- libnames="$libnames $try"
+ *) dflt="$vendorlib"
;;
- *) libnames="$libnames $thislib" ;;
esac
- done
+ fn=d~+
+ rp='Pathname for the vendor-supplied library files?'
+ . ./getfile
+ vendorlib="$ans"
+ vendorlibexp="$ansexp"
;;
esac
-xxx=normal
-case "$libc" in
-unknown)
- set /lib/libc.$so
- for xxx in $libpth; do
- $test -r $1 || set $xxx/libc.$so
- : The messy sed command sorts on library version numbers.
- $test -r $1 || \
- set `echo blurfl; echo $xxx/libc.$so.[0-9]* | \
- tr ' ' $trnl | egrep -v '\.[A-Za-z]*$' | $sed -e '
- h
- s/[0-9][0-9]*/0000&/g
- s/0*\([0-9][0-9][0-9][0-9][0-9]\)/\1/g
- G
- s/\n/ /' | \
- sort | $sed -e 's/^.* //'`
- eval set \$$#
- done
- $test -r $1 || set /usr/ccs/lib/libc.$so
- $test -r $1 || set /lib/libsys_s$_a
- ;;
-*)
- set blurfl
+vendorlib_stem=`echo "$vendorlibexp" | sed "s,/$version$,,"`
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installvendorlib=`echo $vendorlibexp | $sed "s#^$prefix#$installprefix#"`
+else
+ installvendorlib="$vendorlibexp"
+fi
+
+case "$vendorprefix" in
+'') d_vendorarch="$undef"
+ vendorarch=''
+ vendorarchexp=''
;;
-esac
-if $test -r "$1"; then
- echo "Your (shared) C library seems to be in $1."
- libc="$1"
-elif $test -r /lib/libc && $test -r /lib/clib; then
- echo "Your C library seems to be in both /lib/clib and /lib/libc."
- xxx=apollo
- libc='/lib/clib /lib/libc'
- if $test -r /lib/syslib; then
- echo "(Your math library is in /lib/syslib.)"
- libc="$libc /lib/syslib"
- fi
-elif $test -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
- echo "Your C library seems to be in $libc, as you said before."
-elif $test -r $incpath/usr/lib/libc$_a; then
- libc=$incpath/usr/lib/libc$_a;
- echo "Your C library seems to be in $libc. That's fine."
-elif $test -r /lib/libc$_a; then
- libc=/lib/libc$_a;
- echo "Your C library seems to be in $libc. You're normal."
+*) d_vendorarch="$define"
+ : determine where vendor-supplied architecture-dependent libraries go.
+ : vendorlib default is /usr/local/lib/perl5/vendor_perl/$version
+ : vendorarch default is /usr/local/lib/perl5/vendor_perl/$version/$archname
+ : vendorlib may have an optional trailing /share.
+ case "$vendorarch" in
+ '') dflt=`echo $vendorlib | $sed 's,/share$,,'`
+ dflt="$dflt/$archname"
+ ;;
+ *) dflt="$vendorarch" ;;
+ esac
+ fn=d~+
+ rp='Pathname for vendor-supplied architecture-dependent files?'
+ . ./getfile
+ vendorarch="$ans"
+ vendorarchexp="$ansexp"
+ ;;
+esac
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installvendorarch=`echo $vendorarchexp | sed "s#^$prefix#$installprefix#"`
else
- if tans=`./loc libc$_a blurfl/dyick $libpth`; $test -r "$tans"; then
- :
- elif tans=`./loc libc blurfl/dyick $libpth`; $test -r "$tans"; then
- libnames="$libnames "`./loc clib blurfl/dyick $libpth`
- elif tans=`./loc clib blurfl/dyick $libpth`; $test -r "$tans"; then
- :
- elif tans=`./loc Slibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
- :
- elif tans=`./loc Mlibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
- :
- else
- tans=`./loc Llibc$_a blurfl/dyick $xlibpth`
- fi
- if $test -r "$tans"; then
- echo "Your C library seems to be in $tans, of all places."
- libc=$tans
- else
- libc='blurfl'
- fi
+ installvendorarch="$vendorarchexp"
fi
-if $test $xxx = apollo -o -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
- dflt="$libc"
- cat <<EOM
-If the guess above is wrong (which it might be if you're using a strange
-compiler, or your machine supports multiple models), you can override it here.
+: Final catch-all directories to search
+$cat <<EOM
+Lastly, you can have perl look in other directories for extensions and
+modules in addition to those already specified.
+These directories will be searched after
+ $sitearch
+ $sitelib
EOM
-else
- dflt=''
- echo $libpth | tr ' ' $trnl | sort | uniq > libpath
- cat >&4 <<EOM
-I can't seem to find your C library. I've looked in the following places:
+test X"$vendorlib" != "X" && echo ' ' $vendorlib
+test X"$vendorarch" != "X" && echo ' ' $vendorarch
+echo ' '
+case "$otherlibdirs" in
+''|' ') dflt='none' ;;
+*) dflt="$otherlibdirs" ;;
+esac
+$cat <<EOM
+Enter a colon-separated set of extra paths to include in perl's @INC
+search path, or enter 'none' for no extra paths.
EOM
- $sed 's/^/ /' libpath
- cat <<EOM
-None of these seems to contain your C library. I need to get its name...
+rp='Colon-separated list of additional directories for perl to search?'
+. ./myread
+case "$ans" in
+' '|''|none) otherlibdirs=' ' ;;
+*) otherlibdirs="$ans" ;;
+esac
+case "$otherlibdirs" in
+' ') val=$undef ;;
+*) val=$define ;;
+esac
+set d_perl_otherlibdirs
+eval $setvar
-EOM
+: Cruising for prototypes
+echo " "
+echo "Checking out function prototypes..." >&4
+$cat >prototype.c <<'EOCP'
+int main(int argc, char *argv[]) {
+ exit(0);}
+EOCP
+if $cc $ccflags -c prototype.c >prototype.out 2>&1 ; then
+ echo "Your C compiler appears to support function prototypes."
+ val="$define"
+else
+ echo "Your C compiler doesn't seem to understand function prototypes."
+ val="$undef"
fi
-fn=f
-rp='Where is your C library?'
-. ./getfile
-libc="$ans"
+set prototype
+eval $setvar
+$rm -f prototype*
-echo " "
-echo $libc $libnames | tr ' ' $trnl | sort | uniq > libnames
-set X `cat libnames`
-shift
-xxx=files
-case $# in 1) xxx=file; esac
-echo "Extracting names from the following $xxx for later perusal:" >&4
-echo " "
-$sed 's/^/ /' libnames >&4
-echo " "
-$echo $n "This may take a while...$c" >&4
+case "$prototype" in
+"$define") ;;
+*) ansi2knr='ansi2knr'
+ echo " "
+ cat <<EOM >&4
-for file in $*; do
- case $file in
- *$so*) $nm $nm_so_opt $nm_opt $file 2>/dev/null;;
- *) $nm $nm_opt $file 2>/dev/null;;
- esac
-done >libc.tmp
+$me: FATAL ERROR:
+This version of $package can only be compiled by a compiler that
+understands function prototypes. Unfortunately, your C compiler
+ $cc $ccflags
+doesn't seem to understand them. Sorry about that.
-$echo $n ".$c"
-$grep fprintf libc.tmp > libc.ptf
-xscan='eval "<libc.ptf $com >libc.list"; $echo $n ".$c" >&4'
-xrun='eval "<libc.tmp $com >libc.list"; echo "done" >&4'
-xxx='[ADTSIW]'
-if com="$sed -n -e 's/__IO//' -e 's/^.* $xxx *_[_.]*//p' -e 's/^.* $xxx *//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^__*//' -e 's/^\([a-zA-Z_0-9$]*\).*xtern.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e '/|UNDEF/d' -e '/FUNC..GL/s/^.*|__*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.* D __*//p' -e 's/^.* D //p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^_//' -e 's/^\([a-zA-Z_0-9]*\).*xtern.*text.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$grep '|' | $sed -n -e '/|COMMON/d' -e '/|DATA/d' \
- -e '/ file/d' -e 's/^\([^ ]*\).*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p' -e 's/^.*|FUNC |WEAK .*|//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^__//' -e '/|Undef/d' -e '/|Proc/s/ .*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|Proc .*|Text *| *//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e '/Def. Text/s/.* \([^ ]*\)\$/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^[-0-9a-f ]*_\(.*\)=.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/.*\.text n\ \ \ \.//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="sed -n -e 's/^__.*//' -e 's/[ ]*D[ ]*[0-9]*.*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
+If GNU cc is available for your system, perhaps you could try that instead.
+
+Eventually, we hope to support building Perl with pre-ANSI compilers.
+If you would like to help in that effort, please contact <perlbug@perl.org>.
+
+Aborting Configure now.
+EOM
+ exit 2
+ ;;
+esac
+
+: determine where public executables go
+echo " "
+set dflt bin bin
+eval $prefixit
+fn=d~
+rp='Pathname where the public executables will reside?'
+. ./getfile
+if $test "X$ansexp" != "X$binexp"; then
+ installbin=''
+fi
+bin="$ans"
+binexp="$ansexp"
+: Change installation prefix, if necessary.
+: XXX Bug? -- ignores Configure -Dinstallprefix setting.
+if $test X"$prefix" != X"$installprefix"; then
+ installbin=`echo $binexp | sed "s#^$prefix#$installprefix#"`
else
- $nm -p $* 2>/dev/null >libc.tmp
- $grep fprintf libc.tmp > libc.ptf
- if com="$sed -n -e 's/^.* [ADTSIW] *_[_.]*//p' -e 's/^.* [ADTSIW] //p'";\
- eval $xscan; $contains '^fprintf$' libc.list >/dev/null 2>&1
- then
- nm_opt='-p'
- eval $xrun
+ installbin="$binexp"
+fi
+
+: Find perl5.005 or later.
+echo "Looking for a previously installed perl5.005 or later... "
+case "$perl5" in
+'') for tdir in `echo "$binexp:$PATH" | $sed "s/$path_sep/ /g"`; do
+ : Check if this perl is recent and can load a simple module
+ if $test -x $tdir/perl && $tdir/perl -Mless -e 'use 5.005;' >/dev/null 2>&1; then
+ perl5=$tdir/perl
+ break;
+ elif $test -x $tdir/perl5 && $tdir/perl5 -Mless -e 'use 5.005;' >/dev/null 2>&1; then
+ perl5=$tdir/perl
+ break;
+ fi
+ done
+ ;;
+*) perl5="$perl5"
+ ;;
+esac
+case "$perl5" in
+'') echo "None found. That's ok.";;
+*) echo "Using $perl5." ;;
+esac
+
+: Determine list of previous versions to include in @INC
+$cat > getverlist <<EOPL
+#!$perl5 -w
+use File::Basename;
+\$api_versionstring = "$api_versionstring";
+\$version = "$version";
+\$stem = "$sitelib_stem";
+\$archname = "$archname";
+EOPL
+ $cat >> getverlist <<'EOPL'
+# Can't have leading @ because metaconfig interprets it as a command!
+;@inc_version_list=();
+# XXX Redo to do opendir/readdir?
+if (-d $stem) {
+ chdir($stem);
+ ;@candidates = glob("5.*");
+}
+else {
+ ;@candidates = ();
+}
+
+# XXX ToDo: These comparisons must be reworked when two-digit
+# subversions come along, so that 5.7.10 compares as greater than
+# 5.7.3! By that time, hope that 5.6.x is sufficiently
+# widespread that we can use the built-in version vectors rather
+# than reinventing them here. For 5.6.0, however, we must
+# assume this script will likely be run by 5.005_0x. --AD 1/2000.
+foreach $d (@candidates) {
+ if ($d lt $version) {
+ if ($d ge $api_versionstring) {
+ unshift(@inc_version_list, grep { -d } "$d/$archname", $d);
+ }
+ elsif ($d ge "5.005") {
+ unshift(@inc_version_list, grep { -d } $d);
+ }
+ }
+ else {
+ # Skip newer version. I.e. don't look in
+ # 5.7.0 if we're installing 5.6.1.
+ }
+}
+
+if (@inc_version_list) {
+ print join(' ', @inc_version_list);
+}
+else {
+ # Blank space to preserve value for next Configure run.
+ print " ";
+}
+EOPL
+chmod +x getverlist
+case "$inc_version_list" in
+'') if test -x "$perl5"; then
+ dflt=`$perl5 getverlist`
else
- echo " "
- echo "$nm didn't seem to work right. Trying $ar instead..." >&4
- com=''
- if $ar t $libc > libc.tmp && $contains '^fprintf$' libc.tmp >/dev/null 2>&1; then
- for thisname in $libnames $libc; do
- $ar t $thisname >>libc.tmp
- done
- $sed -e "s/\\$_o\$//" < libc.tmp > libc.list
- echo "Ok." >&4
- elif test "X$osname" = "Xos2" && $ar tv $libc > libc.tmp; then
- # Repeat libc to extract forwarders to DLL entries too
- for thisname in $libnames $libc; do
- $ar tv $thisname >>libc.tmp
- # Revision 50 of EMX has bug in $ar.
- # it will not extract forwarders to DLL entries
- # Use emximp which will extract exactly them.
- emximp -o tmp.imp $thisname \
- 2>/dev/null && \
- $sed -e 's/^\([_a-zA-Z0-9]*\) .*$/\1/p' \
- < tmp.imp >>libc.tmp
- $rm tmp.imp
- done
- $sed -e "s/\\$_o\$//" -e 's/^ \+//' < libc.tmp > libc.list
- echo "Ok." >&4
- else
- echo "$ar didn't seem to work right." >&4
- echo "Maybe this is a Cray...trying bld instead..." >&4
- if bld t $libc | $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" > libc.list
- then
- for thisname in $libnames; do
- bld t $libnames | \
- $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" >>libc.list
- $ar t $thisname >>libc.tmp
- done
- echo "Ok." >&4
- else
- echo "That didn't work either. Giving up." >&4
- exit 1
- fi
- fi
+ dflt='none'
fi
-fi
-nm_extract="$com"
-if $test -f /lib/syscalls.exp; then
- echo " "
- echo "Also extracting names from /lib/syscalls.exp for good ole AIX..." >&4
- $sed -n 's/^\([^ ]*\)[ ]*syscall[0-9]*$/\1/p' /lib/syscalls.exp >>libc.list
-fi
-;;
+ ;;
+$undef) dflt='none' ;;
+*) dflt="$inc_version_list" ;;
esac
-$rm -f libnames libpath
+case "$dflt" in
+''|' ') dflt=none ;;
+esac
+case "$dflt" in
+5.005) case "$bincompat5005" in
+ $define|true|[yY]*) ;;
+ *) dflt=none ;;
+ esac
+ ;;
+esac
+$cat <<'EOM'
+
+In order to ease the process of upgrading, this version of perl
+can be configured to use modules built and installed with earlier
+versions of perl that were installed under $prefix. Specify here
+the list of earlier versions that this version of perl should check.
+If Configure detected no earlier versions of perl installed under
+$prefix, then the list will be empty. Answer 'none' to tell perl
+to not search earlier versions.
+
+The default should almost always be sensible, so if you're not sure,
+just accept the default.
+EOM
+
+rp='List of earlier versions to include in @INC?'
+. ./myread
+case "$ans" in
+[Nn]one|''|' ') inc_version_list=' ' ;;
+*) inc_version_list="$ans" ;;
+esac
+case "$inc_version_list" in
+''|' ')
+ inc_version_list_init='0';;
+*) inc_version_list_init=`echo $inc_version_list |
+ $sed -e 's/^/"/' -e 's/ /","/g' -e 's/$/",0/'`
+ ;;
+esac
+$rm -f getverlist
+
+: determine whether to install perl also as /usr/bin/perl
+
+echo " "
+if $test -d /usr/bin -a "X$installbin" != X/usr/bin; then
+ $cat <<EOM
+Many scripts expect perl to be installed as /usr/bin/perl.
+I can install the perl you are about to compile also as /usr/bin/perl
+(in addition to $installbin/perl).
+EOM
+ case "$installusrbinperl" in
+ "$undef"|[nN]*) dflt='n';;
+ *) dflt='y';;
+ esac
+ rp="Do you want to install perl as /usr/bin/perl?"
+ . ./myread
+ case "$ans" in
+ [yY]*) val="$define";;
+ *) val="$undef" ;;
+ esac
+else
+ val="$undef"
+fi
+set installusrbinperl
+eval $setvar
: see if dld is available
set dld.h i_dld
eval $inhdr
-: is a C symbol defined?
-csym='tlook=$1;
-case "$3" in
--v) tf=libc.tmp; tc=""; tdc="";;
--a) tf=libc.tmp; tc="[0]"; tdc="[]";;
-*) tlook="^$1\$"; tf=libc.list; tc="()"; tdc="()";;
-esac;
-tx=yes;
-case "$reuseval-$4" in
-true-) ;;
-true-*) tx=no; eval "tval=\$$4"; case "$tval" in "") tx=yes;; esac;;
-esac;
-case "$tx" in
-yes)
- case "$runnm" in
- true)
- if $contains $tlook $tf >/dev/null 2>&1;
- then tval=true;
- else tval=false;
- fi;;
- *)
- echo "int main() { extern short $1$tdc; printf(\"%hd\", $1$tc); }" > t.c;
- if $cc $optimize $ccflags $ldflags -o t t.c $libs >/dev/null 2>&1;
- then tval=true;
- else tval=false;
- fi;
- $rm -f t t.c;;
- esac;;
-*)
- case "$tval" in
- $define) tval=true;;
- *) tval=false;;
- esac;;
-esac;
-eval "$2=$tval"'
-
-: define an is-in-libc? function
-inlibc='echo " "; td=$define; tu=$undef;
-sym=$1; var=$2; eval "was=\$$2";
-tx=yes;
-case "$reuseval$was" in
-true) ;;
-true*) tx=no;;
-esac;
-case "$tx" in
-yes)
- set $sym tres -f;
- eval $csym;
- case "$tres" in
- true)
- echo "$sym() found." >&4;
- case "$was" in $undef) . ./whoa; esac; eval "$var=\$td";;
- *)
- echo "$sym() NOT found." >&4;
- case "$was" in $define) . ./whoa; esac; eval "$var=\$tu";;
- esac;;
-*)
- case "$was" in
- $define) echo "$sym() found." >&4;;
- *) echo "$sym() NOT found." >&4;;
- esac;;
-esac'
-
: see if dlopen exists
xxx_runnm="$runnm"
runnm=false
esac
for thisflag in $ldflags; do
case "$thisflag" in
- -L*)
+ -L*|-R*)
case " $dflt " in
*" $thisflag "*) ;;
*) dflt="$dflt $thisflag" ;;
*) $cat >&4 <<EOM
WARNING: Use of the shrpdir variable for the installation location of
the shared $libperl is not supported. It was never documented and
-will not work in this version. Let me (perlbug@perl.com)
+will not work in this version. Let me (perlbug@perl.org)
know of any problems this may cause.
EOM
none) ldlibpthname='' ;;
esac
+: determine where manual pages are on this system
+echo " "
+case "$sysman" in
+'')
+ syspath='/usr/man/man1 /usr/man/mann /usr/man/manl /usr/man/local/man1'
+ syspath="$syspath /usr/man/u_man/man1 /usr/share/man/man1"
+ syspath="$syspath /usr/catman/u_man/man1 /usr/man/l_man/man1"
+ syspath="$syspath /usr/local/man/u_man/man1 /usr/local/man/l_man/man1"
+ syspath="$syspath /usr/man/man.L /local/man/man1 /usr/local/man/man1"
+ sysman=`./loc . /usr/man/man1 $syspath`
+ ;;
+esac
+if $test -d "$sysman"; then
+ echo "System manual is in $sysman." >&4
+else
+ echo "Could not find manual pages in source form." >&4
+fi
+
: determine where manual pages go
set man1dir man1dir none
eval $prefixit
/[ ]$myhostname[ . ]/p" > hosts
}
tmp_re="[ . ]"
- $test x`$awk "/[0-9].*[ ]$myhostname$tmp_re/ { sum++ }
+ if $test -f hosts; then
+ $test x`$awk "/[0-9].*[ ]$myhostname$tmp_re/ { sum++ }
END { print sum }" hosts` = x1 || tmp_re="[ ]"
- dflt=.`$awk "/[0-9].*[ ]$myhostname$tmp_re/ {for(i=2; i<=NF;i++) print \\\$i}" \
- hosts | $sort | $uniq | \
- $sed -n -e "s/$myhostname\.\([-a-zA-Z0-9_.]\)/\1/p"`
- case `$echo X$dflt` in
- X*\ *) echo "(Several hosts in /etc/hosts matched hostname)"
+ dflt=.`$awk "/[0-9].*[ ]$myhostname$tmp_re/ {for(i=2; i<=NF;i++) print \\\$i}" \
+ hosts | $sort | $uniq | \
+ $sed -n -e "s/$myhostname\.\([-a-zA-Z0-9_.]\)/\1/p"`
+ case `$echo X$dflt` in
+ X*\ *) echo "(Several hosts in the database matched hostname)"
+ dflt=.
+ ;;
+ X.) echo "(You do not have fully-qualified names in the hosts database)"
+ ;;
+ esac
+ else
+ echo "(I cannot locate a hosts database anywhere)"
dflt=.
- ;;
- X.) echo "(You do not have fully-qualified names in /etc/hosts)"
- ;;
- esac
+ fi
case "$dflt" in
.)
tans=`./loc resolv.conf X /etc /usr/etc`
If you or somebody else will be maintaining perl at your site, please
fill in the correct e-mail address here so that they may be contacted
if necessary. Currently, the "perlbug" program included with perl
-will send mail to this address in addition to perlbug@perl.com. You may
+will send mail to this address in addition to perlbug@perl.org. You may
enter "none" for no administrator.
EOM
fn=d~
rp='Where do you keep publicly executable scripts?'
. ./getfile
-if $test "X$ansexp" != "X$scriptdirexp"; then
- installscript=''
-fi
-scriptdir="$ans"
-scriptdirexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installscript=`echo $scriptdirexp | sed "s#^$prefix#$installprefix#"`
-else
- installscript="$scriptdirexp"
-fi
-
-: determine where site specific architecture-dependent libraries go.
-: sitelib default is /usr/local/lib/perl5/site_perl/$version
-: sitearch default is /usr/local/lib/perl5/site_perl/$version/$archname
-: sitelib may have an optional trailing /share.
-case "$sitearch" in
-'') dflt=`echo $sitelib | $sed 's,/share$,,'`
- dflt="$dflt/$archname"
- ;;
-*) dflt="$sitearch"
- ;;
-esac
-set sitearch sitearch none
-eval $prefixit
-$cat <<EOM
-
-The installation process will also create a directory for
-architecture-dependent site-specific extensions and modules.
-
-EOM
-fn=d~+
-rp='Pathname for the site-specific architecture-dependent library files?'
-. ./getfile
-sitearch="$ans"
-sitearchexp="$ansexp"
+if $test "X$ansexp" != "X$scriptdirexp"; then
+ installscript=''
+fi
+scriptdir="$ans"
+scriptdirexp="$ansexp"
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installsitearch=`echo $sitearchexp | sed "s#^$prefix#$installprefix#"`
+ installscript=`echo $scriptdirexp | sed "s#^$prefix#$installprefix#"`
else
- installsitearch="$sitearchexp"
+ installscript="$scriptdirexp"
fi
: determine where add-on public executables go
installsitebin="$sitebinexp"
fi
-: see if sqrtl exists
-set sqrtl d_sqrtl
-eval $inlibc
-
-case "$ccflags" in
-*-DUSE_LONG_DOUBLE*|*-DUSE_MORE_BITS*) uselongdouble="$define" ;;
-esac
-
-case "$uselongdouble" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-cat <<EOM
-
-Perl can be built to take advantage of long doubles which
-(if available) may give more accuracy and range for floating point numbers.
-
-If this doesn't make any sense to you, just accept the default '$dflt'.
-EOM
-rp='Try to use long doubles if available?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
-esac
-set uselongdouble
-eval $setvar
-
-case "$uselongdouble" in
-true|[yY]*) uselongdouble="$define" ;;
-esac
-
-case "$uselongdouble" in
-$define)
-: Look for a hint-file generated 'call-back-unit'. If the
-: user has specified that long doubles should be used,
-: we may need to set or change some other defaults.
- if $test -f uselongdouble.cbu; then
- echo "Your platform has some specific hints for long doubles, using them..."
- . ./uselongdouble.cbu
- else
- $cat <<EOM
-(Your platform doesn't have any specific hints for long doubles.)
-EOM
- fi
- ;;
-esac
-
-case "$uselongdouble:$d_sqrtl" in
-$define:$undef)
- $cat <<EOM >&4
-
-*** You requested the use of long doubles but you do not seem to have
-*** the mathematic functions for long doubles. I'm disabling the use
-*** of long doubles.
-
-EOM
- uselongdouble=$undef
- ;;
-esac
-
case "$useperlio" in
$define|true|[yY]*) dflt='y';;
*) dflt='n';;
installvendorbin="$vendorbinexp"
fi
-: see if qgcvt exists
-set qgcvt d_qgcvt
-eval $inlibc
-
-: check for length of double
+: determine whether to only install version-specific parts.
echo " "
-case "$doublesize" in
-'')
- echo "Checking to see how big your double precision numbers are..." >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", (int)sizeof(double));
- exit(0);
-}
-EOCP
- set try
- if eval $compile_ok; then
- doublesize=`./try`
- echo "Your double is $doublesize bytes long."
- else
- dflt='8'
- echo "(I can't seem to compile the test program. Guessing...)"
- rp="What is the size of a double precision number (in bytes)?"
- . ./myread
- doublesize="$ans"
- fi
- ;;
+$cat <<EOM
+Do you want to install only the version-specific parts of the perl
+distribution? Usually you do *not* want to do this.
+EOM
+case "$versiononly" in
+"$define"|[Yy]*|true) dflt='y' ;;
+*) dflt='n';
esac
-$rm -f try.c try
-
-: check for long doubles
-echo " "
-echo "Checking to see if you have long double..." >&4
-echo 'int main() { long double x = 7.0; }' > try.c
-set try
-if eval $compile; then
- val="$define"
- echo "You have long double."
-else
- val="$undef"
- echo "You do not have long double."
-fi
-$rm try.*
-set d_longdbl
+rp="Do you want to install only the version-specific parts of perl?"
+. ./myread
+case "$ans" in
+[yY]*) val="$define";;
+*) val="$undef" ;;
+esac
+set versiononly
eval $setvar
-: check for length of long double
-case "${d_longdbl}${longdblsize}" in
-$define)
- echo " "
- echo "Checking to see how big your long doubles are..." >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", sizeof(long double));
-}
-EOCP
- set try
- set try
- if eval $compile; then
- longdblsize=`./try$exe_ext`
- echo "Your long doubles are $longdblsize bytes long."
- else
- dflt='8'
- echo " "
- echo "(I can't seem to compile the test program. Guessing...)" >&4
- rp="What is the size of a long double (in bytes)?"
- . ./myread
- longdblsize="$ans"
- fi
- if $test "X$doublesize" = "X$longdblsize"; then
- echo "(That isn't any different from an ordinary double.)"
- fi
- ;;
-esac
-$rm -f try.* try
+: see if qgcvt exists
+set qgcvt d_qgcvt
+eval $inlibc
echo " "
case "$yyy" in
123.456)
sPRIfldbl='"f"'; sPRIgldbl='"g"'; sPRIeldbl='"e"';
- sPRIFldbl='"F"'; sPRIGldbl='"G"'; sPRIEldbl='"E"';
+ sPRIFUldbl='"F"'; sPRIGUldbl='"G"'; sPRIEUldbl='"E"';
echo "We will use %f."
;;
esac
case "$yyy" in
123.456)
sPRIfldbl='"llf"'; sPRIgldbl='"llg"'; sPRIeldbl='"lle"';
- sPRIFldbl='"llF"'; sPRIGldbl='"llG"'; sPRIEldbl='"llE"';
+ sPRIFUldbl='"llF"'; sPRIGUldbl='"llG"'; sPRIEUldbl='"llE"';
echo "We will use %llf."
;;
esac
case "$yyy" in
123.456)
sPRIfldbl='"Lf"'; sPRIgldbl='"Lg"'; sPRIeldbl='"Le"';
- sPRIFldbl='"LF"'; sPRIGldbl='"LG"'; sPRIEldbl='"LE"';
+ sPRIFUldbl='"LF"'; sPRIGUldbl='"LG"'; sPRIEUldbl='"LE"';
echo "We will use %Lf."
;;
esac
case "$yyy" in
123.456)
sPRIfldbl='"lf"'; sPRIgldbl='"lg"'; sPRIeldbl='"le"';
- sPRIFldbl='"lF"'; sPRIGldbl='"lG"'; sPRIEldbl='"lE"';
+ sPRIFUldbl='"lF"'; sPRIGUldbl='"lG"'; sPRIEUldbl='"lE"';
echo "We will use %lf."
;;
esac
if $test X"$sPRIfldbl" = X; then
echo "Cannot figure out how to print long doubles." >&4
+else
+ sSCNfldbl=$sPRIfldbl # expect consistency
fi
$rm -f try try.*
case "$sPRIfldbl" in
'') d_PRIfldbl="$undef"; d_PRIgldbl="$undef"; d_PRIeldbl="$undef";
- d_PRIFldbl="$undef"; d_PRIGldbl="$undef"; d_PRIEldbl="$undef";
+ d_PRIFUldbl="$undef"; d_PRIGUldbl="$undef"; d_PRIEUldbl="$undef";
+ d_SCNfldbl="$undef";
;;
*) d_PRIfldbl="$define"; d_PRIgldbl="$define"; d_PRIeldbl="$define";
- d_PRIFldbl="$define"; d_PRIGldbl="$define"; d_PRIEldbl="$define";
+ d_PRIFUldbl="$define"; d_PRIGUldbl="$define"; d_PRIEUldbl="$define";
+ d_SCNfldbl="$define";
;;
esac
: Check how to convert floats to strings.
-if test "X$d_Gconvert" = X; then
- echo " "
- echo "Checking for an efficient way to convert floats to strings."
- echo " " > try.c
- case "$uselongdouble" in
- "$define") echo "#define USE_LONG_DOUBLE" >>try.c ;;
- esac
- case "$d_longdbl" in
- "$define") echo "#define HAS_LONG_DOUBLE" >>try.c ;;
- esac
- case "$d_PRIgldbl" in
- "$define") echo "#define HAS_PRIgldbl" >>try.c ;;
- esac
- $cat >>try.c <<EOP
+echo " "
+echo "Checking for an efficient way to convert floats to strings."
+echo " " > try.c
+case "$uselongdouble" in
+"$define") echo "#define USE_LONG_DOUBLE" >>try.c ;;
+esac
+case "$d_longdbl" in
+"$define") echo "#define HAS_LONG_DOUBLE" >>try.c ;;
+esac
+case "$d_PRIgldbl" in
+"$define") echo "#define HAS_PRIgldbl" >>try.c ;;
+esac
+$cat >>try.c <<EOP
#ifdef TRY_gconvert
#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
char *myname = "gconvert";
Gconvert((DOUBLETYPE)-100000.0, 8, 0, buf);
checkit("-100000", buf);
+ Gconvert((DOUBLETYPE)123.456, 8, 0, buf);
+ checkit("123.456", buf);
+
exit(0);
}
EOP
- case "$d_Gconvert" in
- gconvert*) xxx_list='gconvert gcvt sprintf' ;;
- gcvt*) xxx_list='gcvt gconvert sprintf' ;;
- sprintf*) xxx_list='sprintf gconvert gcvt' ;;
- *) xxx_list='gconvert gcvt sprintf' ;;
- esac
-
- case "$d_longdbl$uselongdouble$d_qgcvt" in
- "$define$define$define") xxx_list="`echo $xxx_list|sed 's/gcvt/qgcvt gcvt/'`" ;;
- esac
+case "$d_Gconvert" in
+gconvert*) xxx_list='gconvert gcvt sprintf' ;;
+gcvt*) xxx_list='gcvt gconvert sprintf' ;;
+sprintf*) xxx_list='sprintf gconvert gcvt' ;;
+*) xxx_list='gconvert gcvt sprintf' ;;
+esac
+
+case "$d_longdbl$uselongdouble$d_PRIgldbl" in
+"$define$define$define")
+ # for long doubles prefer first qgcvt, then sprintf
+ xxx_list="`echo $xxx_list|sed s/sprintf//`"
+ xxx_list="sprintf $xxx_list"
+ case "$d_qgcvt" in
+ "$define") xxx_list="qgcvt $xxx_list" ;;
+ esac
+ ;;
+esac
- for xxx_convert in $xxx_list; do
- echo "Trying $xxx_convert..."
- $rm -f try try$_o
- set try -DTRY_$xxx_convert
- if eval $compile; then
- echo "$xxx_convert() found." >&4
- if ./try; then
- echo "I'll use $xxx_convert to convert floats into a string." >&4
- break;
- else
- echo "...But $xxx_convert didn't work as I expected."
- fi
+for xxx_convert in $xxx_list; do
+ echo "Trying $xxx_convert..."
+ $rm -f try try$_o
+ set try -DTRY_$xxx_convert
+ if eval $compile; then
+ echo "$xxx_convert() found." >&4
+ if ./try; then
+ echo "I'll use $xxx_convert to convert floats into a string." >&4
+ break;
else
- echo "$xxx_convert NOT found." >&4
+ echo "...But $xxx_convert didn't work as I expected."
fi
- done
-
- case "$xxx_convert" in
- gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
- gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
- qgcvt) d_Gconvert='qgcvt((x),(n),(b))' ;;
- *) case "$uselongdouble$d_longdbl$d_PRIgldbl" in
- "$define$define$define")
- d_Gconvert="sprintf((b),\"%.*$sPRIgldbl\",(n),(x))" ;;
- *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
- esac
- ;;
- esac
-fi
+ else
+ echo "$xxx_convert NOT found." >&4
+ fi
+done
+
+case "$xxx_convert" in
+gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
+gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
+qgcvt) d_Gconvert='qgcvt((x),(n),(b))' ;;
+*) case "$uselongdouble$d_longdbl$d_PRIgldbl" in
+ "$define$define$define")
+ d_Gconvert="sprintf((b),\"%.*\"$sPRIgldbl,(n),(x))" ;;
+ *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
+ esac
+ ;;
+esac
: Initialize h_fcntl
h_fcntl=false
EOCP
: check sys/file.h first, no particular reason here
if $test `./findhdr sys/file.h` && \
- $cc $cppflags -DI_SYS_FILE -o access access.c >/dev/null 2>&1 ; then
+ $cc -o access $cppflags -DI_SYS_FILE access.c >/dev/null 2>&1 ; then
h_sysfile=true;
echo "<sys/file.h> defines the *_OK access constants." >&4
elif $test `./findhdr fcntl.h` && \
- $cc $cppflags -DI_FCNTL -o access access.c >/dev/null 2>&1 ; then
+ $cc -o access $cppflags -DI_FCNTL access.c >/dev/null 2>&1 ; then
h_fcntl=true;
echo "<fcntl.h> defines the *_OK access constants." >&4
elif $test `./findhdr unistd.h` && \
- $cc $cppflags -DI_UNISTD -o access access.c >/dev/null 2>&1 ; then
+ $cc -o access $cppflags -DI_UNISTD access.c >/dev/null 2>&1 ; then
echo "<unistd.h> defines the *_OK access constants." >&4
else
echo "I can't find the four *_OK access constants--I'll use mine." >&4
exit(1);
}
EOP
- if $cc -DTRY_BSD_PGRP $ccflags $ldflags -o set set.c $libs >/dev/null 2>&1 && ./set; then
+ if $cc -o set -DTRY_BSD_PGRP $ccflags $ldflags set.c $libs >/dev/null 2>&1 && ./set; then
echo "You have to use getpgrp(pid) instead of getpgrp()." >&4
val="$define"
- elif $cc $ccflags $ldflags -o set set.c $libs >/dev/null 2>&1 && ./set; then
+ elif $cc -o set $ccflags $ldflags set.c $libs >/dev/null 2>&1 && ./set; then
echo "You have to use getpgrp() instead of getpgrp(pid)." >&4
val="$undef"
else
exit(1);
}
EOP
- if $cc -DTRY_BSD_PGRP $ccflags $ldflags -o set set.c $libs >/dev/null 2>&1 && ./set; then
+ if $cc -o set -DTRY_BSD_PGRP $ccflags $ldflags set.c $libs >/dev/null 2>&1 && ./set; then
echo 'You have to use setpgrp(pid,pgrp) instead of setpgrp().' >&4
val="$define"
- elif $cc $ccflags $ldflags -o set set.c $libs >/dev/null 2>&1 && ./set; then
+ elif $cc -o set $ccflags $ldflags set.c $libs >/dev/null 2>&1 && ./set; then
echo 'You have to use setpgrp() instead of setpgrp(pid,pgrp).' >&4
val="$undef"
else
: Call the object file tmp-dyna.o in case dlext=o.
if $cc $ccflags $cccdlflags -c dyna.c > /dev/null 2>&1 &&
mv dyna${_o} tmp-dyna${_o} > /dev/null 2>&1 &&
- $ld $lddlflags -o dyna.$dlext tmp-dyna${_o} > /dev/null 2>&1 &&
- $cc $ccflags -o fred $ldflags $cccdlflags $ccdlflags fred.c $libs > /dev/null 2>&1; then
+ $ld -o dyna.$dlext $lddlflags tmp-dyna${_o} > /dev/null 2>&1 &&
+ $cc -o fred $ccflags $ldflags $cccdlflags $ccdlflags fred.c $libs > /dev/null 2>&1; then
xxx=`./fred`
case $xxx in
1) echo "Test program failed using dlopen." >&4
set endservent d_endsent
eval $inlibc
-: see if endspent exists
-set endspent d_endspent
-eval $inlibc
-
: Locate the flags for 'open()'
echo " "
$cat >open3.c <<'EOCP'
set d_fpos64_t
eval $setvar
+: see if frexpl exists
+set frexpl d_frexpl
+eval $inlibc
+
hasstruct='varname=$1; struct=$2; shift; shift;
while $test $# -ge 2; do
case "$1" in
set getcwd d_getcwd
eval $inlibc
+: see if getespwnam exists
+set getespwnam d_getespwnam
+eval $inlibc
+
: see if getfsstat exists
set getfsstat d_getfsstat
set d_getprotoprotos getprotoent $i_netdb netdb.h
eval $hasproto
+: see if getprpwnam exists
+set getprpwnam d_getprpwnam
+eval $inlibc
+
: see if getpwent exists
set getpwent d_getpwent
eval $inlibc
set d_getservprotos getservent $i_netdb netdb.h
eval $hasproto
-: see if getspent exists
-set getspent d_getspent
-eval $inlibc
-
: see if getspnam exists
set getspnam d_getspnam
eval $inlibc
eval $setvar
$rm -f isascii*
+: see if isnan exists
+set isnan d_isnan
+eval $inlibc
+
+: see if isnanl exists
+set isnanl d_isnanl
+eval $inlibc
+
: see if killpg exists
set killpg d_killpg
eval $inlibc
set try
if eval $compile; then
val="$define"
- echo "You have have long long."
+ echo "You have long long."
else
val="$undef"
echo "You do not have long long."
+: see if modfl exists
+set modfl d_modfl
+eval $inlibc
+
: see if mprotect exists
set mprotect d_mprotect
eval $inlibc
$rm -f try.* try
+case "$d_nv_preserves_uv" in
+"$define") d_nv_preserves_uv_bits=`expr $uvsize \* 8` ;;
+*) $echo "Checking how many bits of your UVs your NVs can preserve..." >&4
+ $cat <<EOP >try.c
+#include <stdio.h>
+int main() {
+ $uvtype u = 0;
+ int n = 8 * $uvsize;
+ int i;
+ for (i = 0; i < n; i++) {
+ u = u << 1 | ($uvtype)1;
+ if (($uvtype)($nvtype)u != u)
+ break;
+ }
+ printf("%d\n", i);
+ exit(0);
+}
+EOP
+ set try
+ if eval $compile; then
+ d_nv_preserves_uv_bits="`./try$exe_ext`"
+ fi
+ case "$d_nv_preserves_uv_bits" in
+ [1-9]*) $echo "Your NVs can preserve $d_nv_preserves_uv_bits bits of your UVs." 2>&1 ;;
+ *) $echo "Can't figure out how many bits your NVs preserve." 2>&1
+ d_nv_preserves_uv_bits="$undef"
+ ;;
+ esac
+ $rm -f try.* try
+ ;;
+esac
+
: check for off64_t
echo " "
set setpriority d_setprior
eval $inlibc
+: see if setproctitle exists
+set setproctitle d_setproctitle
+eval $inlibc
+
: see if setpwent exists
set setpwent d_setpwent
eval $inlibc
set setsid d_setsid
eval $inlibc
-: see if setspent exists
-set setspent d_setspent
-eval $inlibc
-
: see if setvbuf exists
set setvbuf d_setvbuf
eval $inlibc
*) dflt='n';;
esac
echo "$package can use the sfio library, but it is experimental."
+ case "$useperlio" in
+ "$undef")
+ echo "For sfio also the PerlIO abstraction layer is needed."
+ echo "Earlier you said you wouldn't want that."
+ ;;
+ esac
rp="You seem to have sfio available, do you want to try using it?"
. ./myread
case "$ans" in
- y|Y) ;;
+ y|Y) echo "Ok, turning on both sfio and PerlIO, then."
+ useperlio="$define"
+ val="$define"
+ ;;
*) echo "Ok, avoiding sfio this time. I'll use stdio instead."
val="$undef"
: Remove sfio from list of libraries to use
;;
*) case "$usesfio" in
true|$define|[yY]*)
- echo "Sorry, cannot find sfio on this machine" >&4
- echo "Ignoring your setting of usesfio=$usesfio" >&4
+ echo "Sorry, cannot find sfio on this machine." >&4
+ echo "Ignoring your setting of usesfio=$usesfio." >&4
+ val="$undef"
;;
esac
;;
eval $setvar
$rm -f try.c try
+: see if socks5_init exists
+set socks5_init d_socks5_init
+eval $inlibc
+
: see if sys/stat.h is available
set sys/stat.h i_sysstat
eval $inhdr
#ifdef __hpux
#define strtoll __strtoll
#endif
+#ifdef __EMX__
+#define strtoll _strtoll
+#endif
#include <stdio.h>
extern long long int strtoll(char *s, char **, int);
static int bad = 0;
EOCP
set try
if eval $compile; then
- case "`./try`" in
+ yyy=`./try`
+ case "$yyy" in
ok) echo "Your strtoll() seems to be working okay." ;;
*) cat <<EOM >&4
Your strtoll() doesn't seem to be working okay.
d_strtoll="$undef"
;;
esac
+ else
+ echo "(I can't seem to compile the test program--assuming it doesn't)"
+ d_strtoll="$undef"
fi
;;
esac
set tebcdic
if eval $compile_ok; then
if ./tebcdic; then
- echo "You have EBCDIC." >&4
+ echo "You seem to speak EBCDIC." >&4
val="$define"
else
- echo "Nope, no EBCDIC, probably ASCII or some ISO Latin." >&4
+ echo "Nope, no EBCDIC, probably ASCII or some ISO Latin. Or UTF8." >&4
fi
else
echo "I'm unable to compile the test program." >&4
- echo "I'll assume ASCII or some ISO Latin." >&4
+ echo "I'll assume ASCII or some ISO Latin. Or UTF8." >&4
fi
$rm -f tebcdic.c tebcdic
set ebcdic
case "$yyy" in
12345678901)
sPRId64='"d"'; sPRIi64='"i"'; sPRIu64='"u"';
- sPRIo64='"o"'; sPRIx64='"x"'; sPRIX64='"X"';
+ sPRIo64='"o"'; sPRIx64='"x"'; sPRIXU64='"X"';
echo "We will use %d."
;;
esac
case "$yyy" in
12345678901)
sPRId64='"ld"'; sPRIi64='"li"'; sPRIu64='"lu"';
- sPRIo64='"lo"'; sPRIx64='"lx"'; sPRIX64='"lX"';
+ sPRIo64='"lo"'; sPRIx64='"lx"'; sPRIXU64='"lX"';
echo "We will use %ld."
;;
esac
case "$yyy" in
12345678901)
sPRId64=PRId64; sPRIi64=PRIi64; sPRIu64=PRIu64;
- sPRIo64=PRIo64; sPRIx64=PRIx64; sPRIX64=PRIX64;
+ sPRIo64=PRIo64; sPRIx64=PRIx64; sPRIXU64=PRIXU64;
echo "We will use the C9X style."
;;
esac
#include <sys/types.h>
#include <stdio.h>
int main() {
- long long q = 12345678901LL; /* AIX cc requires the LL prefix. */
+ long long q = 12345678901LL; /* AIX cc requires the LL suffix. */
printf("%lld\n", q);
}
EOCP
case "$yyy" in
12345678901)
sPRId64='"lld"'; sPRIi64='"lli"'; sPRIu64='"llu"';
- sPRIo64='"llo"'; sPRIx64='"llx"'; sPRIX64='"llX"';
+ sPRIo64='"llo"'; sPRIx64='"llx"'; sPRIXU64='"llX"';
echo "We will use the %lld style."
;;
esac
case "$yyy" in
12345678901)
sPRId64='"Ld"'; sPRIi64='"Li"'; sPRIu64='"Lu"';
- sPRIo64='"Lo"'; sPRIx64='"Lx"'; sPRIX64='"LX"';
+ sPRIo64='"Lo"'; sPRIx64='"Lx"'; sPRIXU64='"LX"';
echo "We will use %Ld."
;;
esac
case "$yyy" in
12345678901)
sPRId64='"qd"'; sPRIi64='"qi"'; sPRIu64='"qu"';
- sPRIo64='"qo"'; sPRIx64='"qx"'; sPRIX64='"qX"';
+ sPRIo64='"qo"'; sPRIx64='"qx"'; sPRIXU64='"qX"';
echo "We will use %qd."
;;
esac
case "$sPRId64" in
'') d_PRId64="$undef"; d_PRIi64="$undef"; d_PRIu64="$undef";
- d_PRIo64="$undef"; d_PRIx64="$undef"; d_PRIX64="$undef";
+ d_PRIo64="$undef"; d_PRIx64="$undef"; d_PRIXU64="$undef";
;;
*) d_PRId64="$define"; d_PRIi64="$define"; d_PRIu64="$define";
- d_PRIo64="$define"; d_PRIx64="$define"; d_PRIX64="$define";
+ d_PRIo64="$define"; d_PRIx64="$define"; d_PRIXU64="$define";
;;
esac
uvuformat="$sPRIu64"
uvoformat="$sPRIo64"
uvxformat="$sPRIx64"
+ uvXUformat="$sPRIXU64"
else
if $test X"$ivsize" = X"$longsize"; then
ivdformat='"ld"'
uvuformat='"lu"'
uvoformat='"lo"'
uvxformat='"lx"'
+ uvXUformat='"lX"'
else
if $test X"$ivsize" = X"$intsize"; then
ivdformat='"d"'
uvuformat='"u"'
uvoformat='"o"'
uvxformat='"x"'
+ uvXUformat='"X"'
else
: far out
if $test X"$ivsize" = X"$shortsize"; then
uvuformat='"hu"'
uvoformat='"ho"'
uvxformat='"hx"'
+ uvXUformat='"hX"'
fi
fi
fi
fi
+if $test X"$uselongdouble" = X"$define" -a X"$d_longdbl" = X"$define" -a X"$d_PRIgldbl" = X"$define"; then
+ nveformat="$sPRIeldbl"
+ nvfformat="$sPRIfldbl"
+ nvgformat="$sPRIgldbl"
+ nvEUformat="$sPRIEUldbl"
+ nvFUformat="$sPRIFUldbl"
+ nvGUformat="$sPRIGUldbl"
+else
+ nveformat='"e"'
+ nvfformat='"f"'
+ nvgformat='"g"'
+ nvEUformat='"E"'
+ nvFUformat='"F"'
+ nvGUformat='"G"'
+fi
+
case "$ivdformat" in
'') echo "$0: Fatal: failed to find format strings, cannot continue." >& 4
exit 1
dflt=''
case "$pg" in
/*) dflt=$pg;;
+ [a-zA-Z]:/*) dflt=$pg;;
esac
case "$more" in
/*) dflt=$more;;
+ [a-zA-Z]:/*) dflt=$more;;
esac
case "$less" in
/*) dflt=$less;;
+ [a-zA-Z]:/*) dflt=$less;;
esac
case "$dflt" in
'') dflt=/usr/ucb/more;;
$cc $ccflags -c bar2.c >/dev/null 2>&1
$cc $ccflags -c foo.c >/dev/null 2>&1
$ar rc bar$_a bar2$_o bar1$_o >/dev/null 2>&1
-if $cc $ccflags $ldflags -o foobar foo$_o bar$_a $libs > /dev/null 2>&1 &&
+if $cc -o foobar $ccflags $ldflags foo$_o bar$_a $libs > /dev/null 2>&1 &&
./foobar >/dev/null 2>&1; then
echo "$ar appears to generate random libraries itself."
orderlib=false
ranlib=":"
elif $ar ts bar$_a >/dev/null 2>&1 &&
- $cc $ccflags $ldflags -o foobar foo$_o bar$_a $libs > /dev/null 2>&1 &&
+ $cc -o foobar $ccflags $ldflags foo$_o bar$_a $libs > /dev/null 2>&1 &&
./foobar >/dev/null 2>&1; then
echo "a table of contents needs to be added with '$ar ts'."
orderlib=false
set ieeefp.h i_ieeefp
eval $inhdr
+: see if this is a libutil.h system
+set libutil.h i_libutil
+eval $inhdr
+
: see if locale.h is available
set locale.h i_locale
eval $inhdr
set poll.h i_poll
eval $inhdr
+: see if this is a prot.h system
+set prot.h i_prot
+eval $inhdr
+
echo " "
$echo "Guessing which symbols your C compiler and preprocessor define..." >&4
$cat <<'EOSH' > Cppsym.know
EOSH
./tr '[a-z]' '[A-Z]' < Cppsym.know > Cppsym.a
./tr '[A-Z]' '[a-z]' < Cppsym.know > Cppsym.b
-$cat Cppsym.a Cppsym.b | $tr ' ' $trnl | sort | uniq > Cppsym.know
-$rm -f Cppsym.a Cppsym.b
+$cat Cppsym.know > Cppsym.c
+$cat Cppsym.a Cppsym.b Cppsym.c | $tr ' ' $trnl | sort | uniq > Cppsym.know
+$rm -f Cppsym.a Cppsym.b Cppsym.c
cat <<EOSH > Cppsym
$startsh
if $test \$# -gt 0; then
ccflags="$ccflags"
case "$osname-$gccversion" in
irix-) ccflags="\$ccflags -woff 1178" ;;
+os2-*) ccflags="\$ccflags -Zlinker /PM:VIO" ;;
esac
-$cc $optimize \$ccflags $ldflags -o try try.c $libs && ./try$exe_ext
+$cc -o try $optimize \$ccflags $ldflags try.c $libs && ./try$exe_ext
EOSH
chmod +x Cppsym.try
$eunicefix Cppsym.try
else
if $test -s ccsym.com; then
echo "Your C compiler and pre-processor define these symbols:"
- $sed -e 's/\(.*\)=.*/\1/' ccsym.com
+ $sed -e 's/\(..*\)=.*/\1/' ccsym.com
also='also '
symbols='ones'
cppccsymbols=`$cat ccsym.com`
if $test -s ccsym.cpp; then
$test "$also" && echo " "
echo "Your C pre-processor ${also}defines the following symbols:"
- $sed -e 's/\(.*\)=.*/\1/' ccsym.cpp
+ $sed -e 's/\(..*\)=.*/\1/' ccsym.cpp
also='further '
cppsymbols=`$cat ccsym.cpp`
cppsymbols=`echo $cppsymbols`
if $test -s ccsym.own; then
$test "$also" && echo " "
echo "Your C compiler ${also}defines the following cpp symbols:"
- $sed -e 's/\(.*\)=1/\1/' ccsym.own
- $sed -e 's/\(.*\)=.*/\1/' ccsym.own | $uniq >>Cppsym.true
+ $sed -e 's/\(..*\)=1/\1/' ccsym.own
+ $sed -e 's/\(..*\)=.*/\1/' ccsym.own | $uniq >>Cppsym.true
ccsymbols=`$cat ccsym.own`
ccsymbols=`echo $ccsymbols`
$test "$silent" || sleep 1
fi
fi
-$rm -f ccsym*
+$rm -f ccsym* Cppsym.*
: see if this is a termio system
val="$undef"
true|$define|y) avail_ext="$avail_ext $xxx" ;;
esac
;;
+ Sys/Syslog|sys/syslog)
+ : XXX syslog requires socket
+ case "$d_socket" in
+ true|$define|y) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
Thread|thread)
case "$usethreads" in
true|$define|y) avail_ext="$avail_ext $xxx" ;;
shift
extensions="$*"
+: Remove libraries needed only for extensions
+: The appropriate ext/Foo/Makefile.PL will add them back in, if necessary.
+: The exception is SunOS 4.x, which needs them.
+case "${osname}X${osvers}" in
+sunos*X4*)
+ perllibs="$libs"
+ ;;
+*) case "$usedl" in
+ $define|true|[yY]*)
+ set X `echo " $libs " | sed -e 's@ -lndbm @ @' -e 's@ -lgdbm @ @' -e 's@ -ldbm @ @' -e 's@ -ldb @ @'`
+ shift
+ perllibs="$*"
+ ;;
+ *) perllibs="$libs"
+ ;;
+ esac
+ ;;
+esac
+
: Remove build directory name from cppstdin so it can be used from
: either the present location or the final installed location.
echo " "
cccdlflags='$cccdlflags'
ccdlflags='$ccdlflags'
ccflags='$ccflags'
+ccflags_uselargefiles='$ccflags_uselargefiles'
+ccname='$ccname'
ccsymbols='$ccsymbols'
+ccversion='$ccversion'
cf_by='$cf_by'
cf_email='$cf_email'
cf_time='$cf_time'
cryptlib='$cryptlib'
csh='$csh'
d_Gconvert='$d_Gconvert'
-d_PRIEldbl='$d_PRIEldbl'
-d_PRIFldbl='$d_PRIFldbl'
-d_PRIGldbl='$d_PRIGldbl'
-d_PRIX64='$d_PRIX64'
+d_PRIEUldbl='$d_PRIEUldbl'
+d_PRIFUldbl='$d_PRIFUldbl'
+d_PRIGUldbl='$d_PRIGUldbl'
+d_PRIXU64='$d_PRIXU64'
d_PRId64='$d_PRId64'
d_PRIeldbl='$d_PRIeldbl'
d_PRIfldbl='$d_PRIfldbl'
d_PRIo64='$d_PRIo64'
d_PRIu64='$d_PRIu64'
d_PRIx64='$d_PRIx64'
+d_SCNfldbl='$d_SCNfldbl'
d_access='$d_access'
d_accessx='$d_accessx'
d_alarm='$d_alarm'
d_endpent='$d_endpent'
d_endpwent='$d_endpwent'
d_endsent='$d_endsent'
-d_endspent='$d_endspent'
d_eofnblk='$d_eofnblk'
d_eunice='$d_eunice'
d_fchmod='$d_fchmod'
d_fork='$d_fork'
d_fpathconf='$d_fpathconf'
d_fpos64_t='$d_fpos64_t'
+d_frexpl='$d_frexpl'
d_fs_data_s='$d_fs_data_s'
d_fseeko='$d_fseeko'
d_fsetpos='$d_fsetpos'
d_ftello='$d_ftello'
d_ftime='$d_ftime'
d_getcwd='$d_getcwd'
+d_getespwnam='$d_getespwnam'
d_getfsstat='$d_getfsstat'
d_getgrent='$d_getgrent'
d_getgrps='$d_getgrps'
d_getppid='$d_getppid'
d_getprior='$d_getprior'
d_getprotoprotos='$d_getprotoprotos'
+d_getprpwnam='$d_getprpwnam'
d_getpwent='$d_getpwent'
d_getsbyname='$d_getsbyname'
d_getsbyport='$d_getsbyport'
d_getsent='$d_getsent'
d_getservprotos='$d_getservprotos'
-d_getspent='$d_getspent'
d_getspnam='$d_getspnam'
d_gettimeod='$d_gettimeod'
d_gnulibc='$d_gnulibc'
d_inetaton='$d_inetaton'
d_int64_t='$d_int64_t'
d_isascii='$d_isascii'
+d_isnan='$d_isnan'
+d_isnanl='$d_isnanl'
d_killpg='$d_killpg'
d_lchown='$d_lchown'
d_ldbl_dig='$d_ldbl_dig'
d_mkstemps='$d_mkstemps'
d_mktime='$d_mktime'
d_mmap='$d_mmap'
+d_modfl='$d_modfl'
d_mprotect='$d_mprotect'
d_msg='$d_msg'
d_msg_ctrunc='$d_msg_ctrunc'
d_mymalloc='$d_mymalloc'
d_nice='$d_nice'
d_nv_preserves_uv='$d_nv_preserves_uv'
+d_nv_preserves_uv_bits='$d_nv_preserves_uv_bits'
d_off64_t='$d_off64_t'
d_old_pthread_create_joinable='$d_old_pthread_create_joinable'
d_oldpthreads='$d_oldpthreads'
d_open3='$d_open3'
d_pathconf='$d_pathconf'
d_pause='$d_pause'
+d_perl_otherlibdirs='$d_perl_otherlibdirs'
d_phostname='$d_phostname'
d_pipe='$d_pipe'
d_poll='$d_poll'
d_setpgrp2='$d_setpgrp2'
d_setpgrp='$d_setpgrp'
d_setprior='$d_setprior'
+d_setproctitle='$d_setproctitle'
d_setpwent='$d_setpwent'
d_setregid='$d_setregid'
d_setresgid='$d_setresgid'
d_setruid='$d_setruid'
d_setsent='$d_setsent'
d_setsid='$d_setsid'
-d_setspent='$d_setspent'
d_setvbuf='$d_setvbuf'
d_sfio='$d_sfio'
d_shm='$d_shm'
d_socket='$d_socket'
d_socklen_t='$d_socklen_t'
d_sockpair='$d_sockpair'
+d_socks5_init='$d_socks5_init'
d_sqrtl='$d_sqrtl'
d_statblks='$d_statblks'
d_statfs_f_flags='$d_statfs_f_flags'
full_ar='$full_ar'
full_csh='$full_csh'
full_sed='$full_sed'
+gccosandvers='$gccosandvers'
gccversion='$gccversion'
gidformat='$gidformat'
gidsign='$gidsign'
h_sysfile='$h_sysfile'
hint='$hint'
hostcat='$hostcat'
-huge='$huge'
i16size='$i16size'
i16type='$i16type'
i32size='$i32size'
i_iconv='$i_iconv'
i_ieeefp='$i_ieeefp'
i_inttypes='$i_inttypes'
+i_libutil='$i_libutil'
i_limits='$i_limits'
i_locale='$i_locale'
i_machcthr='$i_machcthr'
i_netinettcp='$i_netinettcp'
i_niin='$i_niin'
i_poll='$i_poll'
+i_prot='$i_prot'
i_pthread='$i_pthread'
i_pwd='$i_pwd'
i_rpcsvcdbm='$i_rpcsvcdbm'
ivtype='$ivtype'
known_extensions='$known_extensions'
ksh='$ksh'
-large='$large'
ld='$ld'
lddlflags='$lddlflags'
ldflags='$ldflags'
+ldflags_uselargefiles='$ldflags_uselargefiles'
ldlibpthname='$ldlibpthname'
less='$less'
lib_ext='$lib_ext'
libsfound='$libsfound'
libspath='$libspath'
libswanted='$libswanted'
+libswanted_uselargefiles='$libswanted_uselargefiles'
line='$line'
lint='$lint'
lkflags='$lkflags'
man3dir='$man3dir'
man3direxp='$man3direxp'
man3ext='$man3ext'
-medium='$medium'
mips_type='$mips_type'
mkdir='$mkdir'
mmaptype='$mmaptype'
-models='$models'
modetype='$modetype'
more='$more'
multiarch='$multiarch'
nm_so_opt='$nm_so_opt'
nonxs_ext='$nonxs_ext'
nroff='$nroff'
+nvEUformat='$nvEUformat'
+nvFUformat='$nvFUformat'
+nvGUformat='$nvGUformat'
+nveformat='$nveformat'
+nvfformat='$nvfformat'
+nvgformat='$nvgformat'
nvsize='$nvsize'
nvtype='$nvtype'
o_nonblock='$o_nonblock'
orderlib='$orderlib'
osname='$osname'
osvers='$osvers'
+otherlibdirs='$otherlibdirs'
package='$package'
pager='$pager'
passcat='$passcat'
perl5='$perl5'
perl='$perl'
perladmin='$perladmin'
+perllibs='$perllibs'
perlpath='$perlpath'
pg='$pg'
phostname='$phostname'
rm='$rm'
rmail='$rmail'
runnm='$runnm'
-sPRIEldbl='$sPRIEldbl'
-sPRIFldbl='$sPRIFldbl'
-sPRIGldbl='$sPRIGldbl'
-sPRIX64='$sPRIX64'
+sPRIEUldbl='$sPRIEUldbl'
+sPRIFUldbl='$sPRIFUldbl'
+sPRIGUldbl='$sPRIGUldbl'
+sPRIXU64='$sPRIXU64'
sPRId64='$sPRId64'
sPRIeldbl='$sPRIeldbl'
sPRIfldbl='$sPRIfldbl'
sPRIo64='$sPRIo64'
sPRIu64='$sPRIu64'
sPRIx64='$sPRIx64'
+sSCNfldbl='$sSCNfldbl'
sched_yield='$sched_yield'
scriptdir='$scriptdir'
scriptdirexp='$scriptdirexp'
sizetype='$sizetype'
sleep='$sleep'
smail='$smail'
-small='$small'
so='$so'
sockethdr='$sockethdr'
socketlib='$socketlib'
sort='$sort'
spackage='$spackage'
spitshell='$spitshell'
-split='$split'
src='$src'
ssizetype='$ssizetype'
startperl='$startperl'
usevfork='$usevfork'
usrinc='$usrinc'
uuname='$uuname'
+uvXUformat='$uvXUformat'
uvoformat='$uvoformat'
uvsize='$uvsize'
uvtype='$uvtype'
vendorprefix='$vendorprefix'
vendorprefixexp='$vendorprefixexp'
version='$version'
+versiononly='$versiononly'
vi='$vi'
voidflags='$voidflags'
xlibpth='$xlibpth'
. UU/myread
case "$ans" in
y*)
- $make depend && echo "Now you must run a $make."
+ $make depend && echo "Now you must run '$make'."
;;
*)
echo "You must run '$make depend' then '$make'."
projects / p5sagit/p5-mst-13.2.git / blobdiff