# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Tue Jul 6 18:36:05 EET DST 1999 [metaconfig 3.0 PL70]
+# Generated on Wed Oct 27 21:32:42 EET DST 1999 [metaconfig 3.0 PL70]
# (with additional metaconfig patches by perlbug@perl.com)
cat >/tmp/c1$$ <<EOF
installarchlib=''
archname=''
myarchname=''
+d_atolf=''
+d_atoll=''
baserev=''
bin=''
binexp=''
installbin=''
+bincompat5005=''
+d_bincompat5005=''
byteorder=''
cc=''
gccversion=''
d_flexfnam=''
d_flock=''
d_fork=''
+d_fs_data_s=''
d_fseeko=''
d_fsetpos=''
+d_fstatfs=''
d_ftello=''
d_ftime=''
d_gettimeod=''
d_uname=''
d_gethostprotos=''
d_getlogin=''
+d_getmnt=''
d_getmntent=''
d_getnbyaddr=''
d_getnbyname=''
d_isascii=''
d_killpg=''
d_lchown=''
+d_ldbl_dig=''
d_link=''
d_locconv=''
d_lockf=''
d_longlong=''
longlongsize=''
d_lstat=''
-d_madvise=''
d_mblen=''
d_mbstowcs=''
d_mbtowc=''
d_mkdir=''
d_mkfifo=''
d_mktime=''
-d_mmap=''
-mmaptype=''
-d_mprotect=''
d_msg=''
d_msgctl=''
d_msgget=''
d_msgrcv=''
d_msgsnd=''
-d_msync=''
-d_munmap=''
d_nice=''
d_open3=''
d_fpathconf=''
d_seekdir=''
d_telldir=''
d_readlink=''
-d_readv=''
d_rename=''
d_rmdir=''
d_safebcpy=''
d_shmget=''
d_sigaction=''
d_sigsetjmp=''
-d_cmsghdr_s=''
d_msg_ctrunc=''
d_msg_dontroute=''
d_msg_oob=''
d_msg_peek=''
d_msg_proxy=''
-d_msghdr_s=''
d_oldsock=''
-d_recvmsg=''
d_scm_rights=''
-d_sendmsg=''
d_socket=''
d_sockpair=''
sockethdr=''
socketlib=''
+d_sqrtl=''
d_statblks=''
-d_fstatfs=''
-d_statfs=''
-d_statfsflags=''
+d_statfs_f_flags=''
+d_statfs_s=''
d_fstatvfs=''
d_statvfs=''
d_stdio_cnt_lval=''
d_semctl_semid_ds=''
d_semctl_semun=''
d_union_semun=''
+d_ustat=''
d_vfork=''
usevfork=''
d_voidsig=''
d_waitpid=''
d_wcstombs=''
d_wctomb=''
-d_writev=''
-d_dbmclose64=''
-d_dbminit64=''
-d_delete64=''
-d_fetch64=''
-d_firstkey64=''
-d_nextkey64=''
-d_store64=''
dlext=''
cccdlflags=''
ccdlflags=''
i_sysfilio=''
i_sysioctl=''
i_syssockio=''
-i_sysmman=''
i_sysmount=''
i_sysndir=''
i_sysparam=''
i_syssecrt=''
i_sysselct=''
i_sysstat=''
+i_sysstatfs=''
i_sysstatvfs=''
i_systimes=''
i_systypes=''
d_iovec_s=''
i_sysuio=''
i_sysun=''
+i_sysvfs=''
i_syswait=''
i_sgtty=''
i_termio=''
i_time=''
timeincl=''
i_unistd=''
+i_ustat=''
i_utime=''
i_values=''
i_stdarg=''
i_varargs=''
i_varhdr=''
i_vfork=''
+installprefix=''
+installprefixexp=''
+installstyle=''
installusrbinperl=''
intsize=''
longsize=''
shortsize=''
-d_dirent64_s=''
-d_flock64_s=''
-d_fstat64=''
-d_ftruncate64=''
-d_ino64_t=''
+d_fpos64_t=''
d_llseek=''
-d_lockf64=''
-d_lseek64=''
-d_lstat64=''
d_off64_t=''
-d_offset_t=''
-d_open64=''
-d_opendir64=''
-d_readdir64=''
-d_seekdir64=''
-d_stat64=''
-d_telldir64=''
-d_truncate64=''
libc=''
+ldlibpthname=''
libperl=''
shrpenv=''
useshrplib=''
ignore_versioned_solibs=''
libs=''
lns=''
+d_PRIEldbl=''
+d_PRIFldbl=''
+d_PRIGldbl=''
+d_PRIeldbl=''
+d_PRIfldbl=''
+d_PRIgldbl=''
+sPRIEldbl=''
+sPRIFldbl=''
+sPRIGldbl=''
+sPRIeldbl=''
+sPRIfldbl=''
+sPRIgldbl=''
lseeksize=''
lseektype=''
make_set_make=''
privlibexp=''
prototype=''
ptrsize=''
+d_PRIX64=''
+d_PRId64=''
+d_PRIi64=''
+d_PRIo64=''
+d_PRIu64=''
+d_PRIx64=''
+sPRIX64=''
+sPRId64=''
+sPRIi64=''
+sPRIo64=''
+sPRIu64=''
+sPRIx64=''
drand01=''
randbits=''
randfunc=''
installsitearch=''
sitearch=''
sitearchexp=''
+installsitebin=''
+sitebin=''
+sitebinexp=''
installsitelib=''
sitelib=''
sitelibexp=''
+siteprefix=''
+siteprefixexp=''
sizetype=''
so=''
sharpbang=''
startperl=''
startsh=''
stdchar=''
-d_fgetpos64=''
-d_fopen64=''
-d_freopen64=''
-d_fseek64=''
-d_fseeko64=''
-d_fsetpos64=''
-d_ftell64=''
-d_ftello64=''
-d_tmpfile64=''
d_stdio_stream_array=''
stdio_stream_array=''
+d_strtoull=''
sysman=''
trnl=''
+uidsign=''
uidtype=''
archname64=''
use64bits=''
+uselargefiles=''
+uselongdouble=''
+usemorebits=''
usemultiplicity=''
nm_opt=''
nm_so_opt=''
d_oldpthreads=''
usethreads=''
incpath=''
-mips=''
mips_type=''
usrinc=''
+d_vendorbin=''
+installvendorbin=''
+vendorbin=''
+vendorbinexp=''
+d_vendorlib=''
+installvendorlib=''
+vendorlib=''
+vendorlibexp=''
+usevendorprefix=''
+vendorprefix=''
+vendorprefixexp=''
defvoidused=''
voidflags=''
+pm_apiversion=''
+xs_apiversion=''
CONFIG=''
define='define'
al="$al M_COFF M_I186 M_I286 M_I386 M_I8086 M_I86 M_I86SM"
al="$al M_SYS3 M_SYS5 M_SYSIII M_SYSV M_UNIX M_XENIX"
al="$al NeXT OCS88 OSF1 PARISC PC532 PORTAR POSIX"
-al="$al PWB R3000 RES RISC6000 RT Sun386i SVR3 SVR4"
+al="$al PWB R3000 RES RISC6000 RT Sun386i SVR3 SVR4 SVR5"
al="$al SYSTYPE_BSD SYSTYPE_SVR4 SYSTYPE_SYSV Tek4132 Tek4300"
al="$al UMAXV USGr4 USGr4_2 UTEK UTS UTek UnicomPBB UnicomPBD Utek"
al="$al VMS Xenix286"
: List of libraries we want.
: If anyone needs -lnet, put it in a hint file.
libswanted='sfio socket inet nsl nm ndbm gdbm dbm db malloc dl'
-libswanted="$libswanted dld ld sun m rt c cposix posix"
+libswanted="$libswanted dld ld sun m c cposix posix"
libswanted="$libswanted ndir dir crypt sec"
libswanted="$libswanted ucb bsd BSD PW x"
: We probably want to search /usr/shlib before most other libraries.
: produce awk script to parse command line options
cat >options.awk <<'EOF'
BEGIN {
- optstr = "dD:eEf:hKOrsSU:V"; # getopt-style specification
+ optstr = "A:dD:eEf:hKOrsSU:V"; # getopt-style specification
len = length(optstr);
for (i = 1; i <= len; i++) {
extractsh=''
override=''
knowitall=''
-rm -f optdef.sh
+rm -f optdef.sh posthint.sh
cat >optdef.sh <<EOS
$startsh
EOS
esac
shift
;;
+ -A)
+ shift
+ xxx=''
+ yyy="$1"
+ zzz=''
+ uuu=undef
+ case "$yyy" in
+ *=*) zzz=`echo $yyy|sed 's!=.*!!'`
+ case "$zzz" in
+ *:*) zzz='' ;;
+ *) xxx=append
+ zzz=" "`echo $yyy|sed 's!^[^=]*=!!'`
+ yyy=`echo $yyy|sed 's!=.*!!'` ;;
+ esac
+ ;;
+ esac
+ case "$xxx" in
+ '') case "$yyy" in
+ *:*) xxx=`echo $yyy|sed 's!:.*!!'`
+ yyy=`echo $yyy|sed 's!^[^:]*:!!'`
+ zzz=`echo $yyy|sed 's!^[^=]*=!!'`
+ yyy=`echo $yyy|sed 's!=.*!!'` ;;
+ *) xxx=`echo $yyy|sed 's!:.*!!'`
+ yyy=`echo $yyy|sed 's!^[^:]*:!!'` ;;
+ esac
+ ;;
+ esac
+ case "$xxx" in
+ append)
+ echo "$yyy=\"\${$yyy}$zzz\"" >> posthint.sh ;;
+ clear)
+ echo "$yyy=''" >> posthint.sh ;;
+ define)
+ case "$zzz" in
+ '') zzz=define ;;
+ esac
+ echo "$yyy='$zzz'" >> posthint.sh ;;
+ eval)
+ echo "eval \"$yyy=$zzz\"" >> posthint.sh ;;
+ prepend)
+ echo "$yyy=\"$zzz\${$yyy}\"" >> posthint.sh ;;
+ undef)
+ case "$zzz" in
+ '') zzz="$uuu" ;;
+ esac
+ echo "$yyy=$zzz" >> posthint.sh ;;
+ *) echo "$me: unknown -A command '$xxx', ignoring -A $1" >&2 ;;
+ esac
+ ;;
-V) echo "$me generated by metaconfig 3.0 PL70." >&2
- exit 0;;
+ exit 0;;
--) break;;
-*) echo "$me: unknown option $1" >&2; shift; error=true;;
*) break;;
true)
cat >&2 <<EOM
Usage: $me [-dehrsEKOSV] [-f config.sh] [-D symbol] [-D symbol=value]
- [-U symbol] [-U symbol=]
+ [-U symbol] [-U symbol=] [-A command:symbol...]
-d : use defaults for all answers.
-e : go on without questioning past the production of config.sh.
-f : specify an alternate default configuration file.
-U : undefine symbol:
-U symbol symbol gets the value 'undef'
-U symbol= symbol gets completely empty
+ -A : manipulate symbol after the platform specific hints have been applied:
+ -A symbol=value append " "value to symbol
+ -A append:symbol=value append value to symbol
+ -A define:symbol=value define symbol to have value
+ -A clear:symbol define symbol to be ''
+ -A define:symbol define symbol to be 'define'
+ -A eval:symbol=value define symbol to be eval of value
+ -A prepend:symbol=value prepend value to symbol
+ -A undef:symbol define symbol to be 'undef'
+ -A undef:symbol= define symbol to be ''
-V : print version number and exit (with a zero status).
EOM
exit 1
: run the defines and the undefines, if any, but leave the file out there...
touch optdef.sh
. ./optdef.sh
+: create the posthint manipulation script and leave the file out there...
+touch posthint.sh
: set package name
package=perl5
: Find the path to the source tree
case "$src" in
'') case "$0" in
- */*) src=`echo $0 | sed -e 's%/[^/][^/]*$%%'`;;
+ */*) src=`echo $0 | sed -e 's%/[^/][^/]*$%%'`
+ case "$src" in
+ /*) ;;
+ *) src=`cd ../$src && pwd` ;;
+ esac
+ ;;
*) src='.';;
esac;;
esac
mips) osname=mips_osf1 ;;
esac
;;
- uts) osname=uts
+ unixware) osname=svr5
+ osvers="$4"
+ ;;
+ uts) osname=uts
osvers="$3"
;;
qnx) osname=qnx
You may give one or more space-separated answers, or "none" if appropriate.
A well-behaved OS will have no hints, so answering "none" or just "Policy"
-is a good thing. DO NOT give a wrong version.
+is a good thing. DO NOT give a wrong version or a wrong OS.
EOM
*) osvers="$ans" ;;
esac
+
+. ./posthint.sh
+
: who configured the system
cf_time=`LC_ALL=C; LANGUAGE=C; export LC_ALL; export LANGUAGE; $date 2>&1`
cf_by=`(logname) 2>/dev/null`
: user has specified that a threading perl is to be built,
: we may need to set or change some other defaults.
if $test -f usethreads.cbu; then
+ echo "Your platform has some specific hints for threaded builds, using them..."
. ./usethreads.cbu
- fi
- case "$osname" in
- aix|dec_osf|dos_djgpp|freebsd|hpux|irix|linux|next|openbsd|os2|solaris|vmesa)
- # Known thread-capable platforms.
- ;;
- *)
- cat >&4 <<EOM
-$osname is not known to support threads.
-Please let perlbug@perl.com know how to do that.
-
-Cannot continue, aborting.
+ else
+ $cat <<EOM
+(Your platform doesn't have any specific hints for threaded builds.
+ Assuming POSIX threads, then.)
EOM
- exit 1
- ;;
- esac # $osname
+ fi
;;
-esac # $usethreads
+esac
cat <<EOM
set usemultiplicity
eval $setvar
-cat <<EOM
-
-Perl can be built to take advantage of explicit 64-bit interfaces,
-on some systems. To do so, Configure must be run with -Duse64bits.
-
-If this doesn't make any sense to you, just accept the default 'n'.
-EOM
-case "$use64bits" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-rp='Try to use explicit 64-bit interfaces, if available?'
-. ./myread
-case "$ans" in
-y|Y)
- val="$define"
- ;;
-*)
- val="$undef"
+: determine where manual pages are on this system
+echo " "
+case "$sysman" in
+'')
+ syspath='/usr/man/man1 /usr/man/mann /usr/man/manl /usr/man/local/man1'
+ syspath="$syspath /usr/man/u_man/man1 /usr/share/man/man1"
+ syspath="$syspath /usr/catman/u_man/man1 /usr/man/l_man/man1"
+ syspath="$syspath /usr/local/man/u_man/man1 /usr/local/man/l_man/man1"
+ syspath="$syspath /usr/man/man.L /local/man/man1 /usr/local/man/man1"
+ sysman=`./loc . /usr/man/man1 $syspath`
;;
esac
-set use64bits
-eval $setvar
+if $test -d "$sysman"; then
+ echo "System manual is in $sysman." >&4
+else
+ echo "Could not find manual pages in source form." >&4
+fi
-case "$archname64" in
-'') archname64='' ;; # not a typo
+: see what memory models we can support
+case "$models" in
+'')
+ $cat >pdp11.c <<'EOP'
+int main() {
+#ifdef pdp11
+ exit(0);
+#else
+ exit(1);
+#endif
+}
+EOP
+ ( cc -o pdp11 pdp11.c ) >/dev/null 2>&1
+ if $test -f pdp11 && ./pdp11 2>/dev/null; then
+ dflt='unsplit split'
+ else
+ tans=`./loc . X /lib/small /lib/large /usr/lib/small /usr/lib/large /lib/medium /usr/lib/medium /lib/huge`
+ case "$tans" in
+ X) dflt='none';;
+ *) if $test -d /lib/small || $test -d /usr/lib/small; then
+ dflt='small'
+ else
+ dflt=''
+ fi
+ if $test -d /lib/medium || $test -d /usr/lib/medium; then
+ dflt="$dflt medium"
+ fi
+ if $test -d /lib/large || $test -d /usr/lib/large; then
+ dflt="$dflt large"
+ fi
+ if $test -d /lib/huge || $test -d /usr/lib/huge; then
+ dflt="$dflt huge"
+ fi
+ esac
+ fi;;
+*) dflt="$models";;
esac
+$cat <<EOM
+
+Some systems have different model sizes. On most systems they are called
+small, medium, large, and huge. On the PDP11 they are called unsplit and
+split. If your system doesn't support different memory models, say "none".
+If you wish to force everything to one memory model, say "none" here and
+put the appropriate flags later when it asks you for other cc and ld flags.
+Venix systems may wish to put "none" and let the compiler figure things out.
+(In the following question multiple model names should be space separated.)
-case "$use64bits" in
-"$define"|true|[yY]*)
-: Look for a hint-file generated 'call-back-unit'. If the
-: user has specified that a threading perl is to be built,
-: we may need to set or change some other defaults.
- if $test -f use64bits.cbu; then
- . ./use64bits.cbu
- fi
- case "$osname" in
- aix|dec_osf|hpux|irix|solaris|unicos)
- # Known 64-bit capable platforms.
- ;;
- *)
- cat >&4 <<EOM
-$osname is not known to support 64-bit interfaces.
-Please let perlbug@perl.com know how to do that.
+The default for most systems is "none".
-Cannot continue, aborting.
EOM
- exit 1
- ;;
+rp="Which memory models are supported?"
+. ./myread
+models="$ans"
+
+case "$models" in
+none)
+ small=''
+ medium=''
+ large=''
+ huge=''
+ unsplit=''
+ split=''
+ ;;
+*split)
+ case "$split" in
+ '') if $contains '\-i' $sysman/ld.1 >/dev/null 2>&1 || \
+ $contains '\-i' $sysman/cc.1 >/dev/null 2>&1; then
+ dflt='-i'
+ else
+ dflt='none'
+ fi;;
+ *) dflt="$split";;
+ esac
+ rp="What flag indicates separate I and D space?"
+ . ./myread
+ tans="$ans"
+ case "$tans" in
+ none) tans='';;
+ esac
+ split="$tans"
+ unsplit='';;
+*large*|*small*|*medium*|*huge*)
+ case "$models" in
+ *large*)
+ case "$large" in
+ '') dflt='-Ml';;
+ *) dflt="$large";;
+ esac
+ rp="What flag indicates large model?"
+ . ./myread
+ tans="$ans"
+ case "$tans" in
+ none) tans='';
+ esac
+ large="$tans";;
+ *) large='';;
+ esac
+ case "$models" in
+ *huge*) case "$huge" in
+ '') dflt='-Mh';;
+ *) dflt="$huge";;
+ esac
+ rp="What flag indicates huge model?"
+ . ./myread
+ tans="$ans"
+ case "$tans" in
+ none) tans='';
+ esac
+ huge="$tans";;
+ *) huge="$large";;
+ esac
+ case "$models" in
+ *medium*) case "$medium" in
+ '') dflt='-Mm';;
+ *) dflt="$medium";;
+ esac
+ rp="What flag indicates medium model?"
+ . ./myread
+ tans="$ans"
+ case "$tans" in
+ none) tans='';
+ esac
+ medium="$tans";;
+ *) medium="$large";;
+ esac
+ case "$models" in
+ *small*) case "$small" in
+ '') dflt='none';;
+ *) dflt="$small";;
+ esac
+ rp="What flag indicates small model?"
+ . ./myread
+ tans="$ans"
+ case "$tans" in
+ none) tans='';
+ esac
+ small="$tans";;
+ *) small='';;
esac
;;
+*)
+ echo "Unrecognized memory models--you may have to edit Makefile.SH" >&4
+ ;;
esac
+$rm -f pdp11.* pdp11
-: determine the architecture name
+: make some quick guesses about what we are up against
echo " "
-if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
- tarch=`arch`"-$osname"
-elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
- if uname -m > tmparch 2>&1 ; then
- tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
- -e 's/$/'"-$osname/" tmparch`
+$echo $n "Hmm... $c"
+echo exit 1 >bsd
+echo exit 1 >usg
+echo exit 1 >v7
+echo exit 1 >osf1
+echo exit 1 >eunice
+echo exit 1 >xenix
+echo exit 1 >venix
+echo exit 1 >os2
+d_bsd="$undef"
+$cat /usr/include/signal.h /usr/include/sys/signal.h >foo 2>/dev/null
+if test -f /osf_boot || $contains 'OSF/1' /usr/include/ctype.h >/dev/null 2>&1
+then
+ echo "Looks kind of like an OSF/1 system, but we'll see..."
+ echo exit 0 >osf1
+elif test `echo abc | tr a-z A-Z` = Abc ; then
+ xxx=`./loc addbib blurfl $pth`
+ if $test -f $xxx; then
+ echo "Looks kind of like a USG system with BSD features, but we'll see..."
+ echo exit 0 >bsd
+ echo exit 0 >usg
else
- tarch="$osname"
+ if $contains SIGTSTP foo >/dev/null 2>&1 ; then
+ echo "Looks kind of like an extended USG system, but we'll see..."
+ else
+ echo "Looks kind of like a USG system, but we'll see..."
+ fi
+ echo exit 0 >usg
fi
- $rm -f tmparch
+elif $contains SIGTSTP foo >/dev/null 2>&1 ; then
+ echo "Looks kind of like a BSD system, but we'll see..."
+ d_bsd="$define"
+ echo exit 0 >bsd
else
- tarch="$osname"
+ echo "Looks kind of like a Version 7 system, but we'll see..."
+ echo exit 0 >v7
fi
-case "$myarchname" in
-''|"$tarch") ;;
-*)
- echo "(Your architecture name used to be $myarchname.)"
- archname=''
+case "$eunicefix" in
+*unixtovms*)
+ $cat <<'EOI'
+There is, however, a strange, musty smell in the air that reminds me of
+something...hmm...yes...I've got it...there's a VMS nearby, or I'm a Blit.
+EOI
+ echo exit 0 >eunice
+ d_eunice="$define"
+: it so happens the Eunice I know will not run shell scripts in Unix format
+ ;;
+*)
+ echo " "
+ echo "Congratulations. You aren't running Eunice."
+ d_eunice="$undef"
+ ;;
+esac
+: Detect OS2. The p_ variable is set above in the Head.U unit.
+case "$p_" in
+:) ;;
+*)
+ $cat <<'EOI'
+I have the feeling something is not exactly right, however...don't tell me...
+lemme think...does HAL ring a bell?...no, of course, you're only running OS/2!
+EOI
+ echo exit 0 >os2
+ ;;
+esac
+if test -f /xenix; then
+ echo "Actually, this looks more like a XENIX system..."
+ echo exit 0 >xenix
+ d_xenix="$define"
+else
+ echo " "
+ echo "It's not Xenix..."
+ d_xenix="$undef"
+fi
+chmod +x xenix
+$eunicefix xenix
+if test -f /venix; then
+ echo "Actually, this looks more like a VENIX system..."
+ echo exit 0 >venix
+else
+ echo " "
+ if ./xenix; then
+ : null
+ else
+ echo "Nor is it Venix..."
+ fi
+fi
+chmod +x bsd usg v7 osf1 eunice xenix venix os2
+$eunicefix bsd usg v7 osf1 eunice xenix venix os2
+$rm -f foo
+
+: see if we need a special compiler
+echo " "
+if ./usg; then
+ case "$cc" in
+ '') case "$Mcc" in
+ /*) dflt='Mcc';;
+ *) case "$large" in
+ -M*) dflt='cc';;
+ *) if $contains '\-M' $sysman/cc.1 >/dev/null 2>&1 ; then
+ if $contains '\-M' $sysman/cpp.1 >/dev/null 2>&1; then
+ dflt='cc'
+ else
+ dflt='cc -M'
+ fi
+ else
+ dflt='cc'
+ fi;;
+ esac;;
+ esac;;
+ *) dflt="$cc";;
+ esac
+ case "$dflt" in
+ *M*) $cat <<'EOM'
+On some older systems the default C compiler will not resolve multiple global
+references that happen to have the same name. On some such systems the "Mcc"
+command may be used to force these to be resolved. On other systems a "cc -M"
+command is required. (Note that the -M flag on other systems indicates a
+memory model to use!) If you have the Gnu C compiler, you might wish to use
+that instead.
+
+EOM
+ ;;
+ esac
+ rp="Use which C compiler?"
+ . ./myread
+ cc="$ans"
+else
+ case "$cc" in
+ '') dflt=cc;;
+ *) dflt="$cc";;
+ esac
+ rp="Use which C compiler?"
+ . ./myread
+ cc="$ans"
+fi
+: Look for a hint-file generated 'call-back-unit'. Now that the
+: user has specified the compiler, we may need to set or change some
+: other defaults.
+if $test -f cc.cbu; then
+ . ./cc.cbu
+fi
+echo " "
+echo "Checking for GNU cc in disguise and/or its version number..." >&4
+$cat >gccvers.c <<EOM
+#include <stdio.h>
+int main() {
+#ifdef __GNUC__
+#ifdef __VERSION__
+ printf("%s\n", __VERSION__);
+#else
+ printf("%s\n", "1");
+#endif
+#endif
+ exit(0);
+}
+EOM
+if $cc -o gccvers gccvers.c; then
+ gccversion=`./gccvers`
+ case "$gccversion" in
+ '') echo "You are not using GNU cc." ;;
+ *) echo "You are using GNU cc $gccversion." ;;
+ esac
+else
+ echo " "
+ echo "*** WHOA THERE!!! ***" >&4
+ echo " Your C compiler \"$cc\" doesn't seem to be working!" >&4
+ case "$knowitall" in
+ '')
+ echo " You'd better start hunting for one and let me know about it." >&4
+ exit 1
+ ;;
+ esac
+fi
+$rm -f gccvers*
+case "$gccversion" in
+1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
+esac
+
+
+case "$usemorebits" in
+"$define"|true|[yY]*)
+ use64bits="$define"
+ uselongdouble="$define"
+ usemorebits="$define"
+ ;;
+*) usemorebits="$undef"
+ ;;
+esac
+
+
+cat <<EOM
+
+Perl can be built to understand large files (files larger than 2 gigabytes)
+on some systems. To do so, Configure must be run with -Duselargefiles.
+
+If this doesn't make any sense to you, just accept the default.
+EOM
+case "$uselargefiles" in
+"$define"|true|[yY]*) dflt='y' ;;
+*) dflt='n' ;;
+esac
+rp='Try to understand large files?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set uselargefiles
+eval $setvar
+case "$uselargefiles" in
+"$define") use64bits="$define" ;;
+esac
+
+cat <<EOM
+
+Perl can be built to take advantage of explicit 64-bit interfaces,
+on some systems. To do so, Configure must be run with -Duse64bits.
+
+If this doesn't make any sense to you, just accept the default.
+EOM
+case "$use64bits" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+rp='Try to use explicit 64-bit interfaces, if available?'
+. ./myread
+case "$ans" in
+y|Y)
+ val="$define"
+ ;;
+*)
+ val="$undef"
+ ;;
+esac
+set use64bits
+eval $setvar
+
+case "$archname64" in
+'') archname64='' ;; # not a typo
+esac
+
+case "$use64bits" in
+"$define"|true|[yY]*)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that a 64 bit perl is to be built,
+: we may need to set or change some other defaults.
+ if $test -f use64bits.cbu; then
+ echo "Your platform has some specific hints for 64-bit builds, using them..."
+ . ./use64bits.cbu
+ else
+ $cat <<EOM
+(Your platform doesn't have any specific hints for 64-bit builds.
+ This is probably okay, especially if your system is a true 64-bit system.)
+EOM
+ case "$gccversion" in
+ '') ;;
+ *) $cat <<EOM
+But since you seem to be using gcc,
+I will now add -DUSE_LONG_LONG to the compilation flags.
+EOM
+ ccflags="$ccflags -DUSE_LONG_LONG"
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+: determine the architecture name
+echo " "
+if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
+ tarch=`arch`"-$osname"
+elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
+ if uname -m > tmparch 2>&1 ; then
+ tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
+ -e 's/$/'"-$osname/" tmparch`
+ else
+ tarch="$osname"
+ fi
+ $rm -f tmparch
+else
+ tarch="$osname"
+fi
+case "$myarchname" in
+''|"$tarch") ;;
+*)
+ echo "(Your architecture name used to be $myarchname.)"
+ archname=''
;;
esac
myarchname="$tarch"
esac
esac
-: is AFS running?
-echo " "
-case "$afs" in
-$define|true) afs=true ;;
-$undef|false) afs=false ;;
-*) if test -d /afs; then
- afs=true
- else
- afs=false
- fi
- ;;
-esac
-if $afs; then
- echo "AFS may be running... I'll be extra cautious then..." >&4
-else
- echo "AFS does not seem to be running..." >&4
-fi
-
: decide how portable to be. Allow command line overrides.
case "$d_portable" in
"$undef") ;;
nopath_ok=''
orig_rp="$rp"
orig_dflt="$dflt"
+case "$gfpth" in
+'') gfpth='.' ;;
+esac
case "$fn" in
*\(*)
'')
case "$type" in
File)
- if test -f "$ansexp"; then
- type=''
- elif test -r "$ansexp" || (test -h "$ansexp") >/dev/null 2>&1
- then
- echo "($value is not a plain file, but that's ok.)"
- type=''
- fi
+ for fp in $gfpth; do
+ if test "X$fp" = X.; then
+ pf="$ansexp"
+ else
+ pf="$fp/$ansexp"
+ fi
+ if test -f "$pf"; then
+ type=''
+ elif test -r "$pf" || (test -h "$pf") >/dev/null 2>&1
+ then
+ echo "($value is not a plain file, but that's ok.)"
+ type=''
+ fi
+ if test X"$type" = X; then
+ value="$pf"
+ break
+ fi
+ done
;;
Directory)
- if test -d "$ansexp"; then
- type=''
- fi
- ;;
+ for fp in $gfpth; do
+ if test "X$fp" = X.; then
+ pf="$ansexp"
+ else
+ pf="$fp/$ansexp"
+ fi
+ if test -d "$pf"; then
+ type=''
+ value="$pf"
+ break
+ fi
+ done
+ ;;
Locate)
if test -d "$ansexp"; then
echo "(Looking for $loc_file in directory $value.)"
rp="$orig_rp"
dflt="$orig_dflt"
rm -f getfile.ok
+test "X$gfpthkeep" != Xy && gfpth=""
EOSC
: determine root of directory hierarchy where package will be installed.
esac
$cat <<EOM
-By default, $package will be installed in $dflt/bin, manual
-pages under $dflt/man, etc..., i.e. with $dflt as prefix for
-all installation directories. Typically set to /usr/local, but you
-may choose /usr if you wish to install $package among your system
-binaries. If you wish to have binaries under /bin but manual pages
-under /usr/local/man, that's ok: you will be prompted separately
-for each of the installation directories, the prefix being only used
-to set the defaults.
+By default, $package will be installed in $dflt/bin, manual pages
+under $dflt/man, etc..., i.e. with $dflt as prefix for all
+installation directories. Typically this is something like /usr/local.
+If you wish to have binaries under /usr/bin but other parts of the
+installation under /usr/local, that's ok: you will be prompted
+separately for each of the installation directories, the prefix being
+only used to set the defaults.
EOM
fn=d~
prefix="$ans"
prefixexp="$ansexp"
+: is AFS running?
+echo " "
+case "$afs" in
+$define|true) afs=true ;;
+$undef|false) afs=false ;;
+*) if test -d /afs; then
+ afs=true
+ else
+ afs=false
+ fi
+ ;;
+esac
+if $afs; then
+ echo "AFS may be running... I'll be extra cautious then..." >&4
+else
+ echo "AFS does not seem to be running..." >&4
+fi
+
+: determine installation prefix for where package is to be installed.
+if $afs; then
+$cat <<EOM
+
+Since you are running AFS, I need to distinguish the directory in which
+files will reside from the directory in which they are installed (and from
+which they are presumably copied to the former directory by occult means).
+
+EOM
+ case "$installprefix" in
+ '') dflt=`echo $prefix | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installprefix";;
+ esac
+else
+$cat <<EOM
+
+In some special cases, particularly when building $package for distribution,
+it is convenient to distinguish between the directory in which files should
+be installed from the directory ($prefix) in which they
+will eventually reside. For most users, these two directories are the same.
+
+EOM
+ case "$installprefix" in
+ '') dflt=$prefix ;;
+ *) dflt=$installprefix;;
+ esac
+fi
+fn=d~
+rp='What installation prefix should I use for installing files?'
+. ./getfile
+installprefix="$ans"
+installprefixexp="$ansexp"
+
: set the prefixit variable, to compute a suitable default value
prefixit='case "$3" in
""|none)
if $test -r $rsrc/patchlevel.h;then
patchlevel=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
subversion=`awk '/define[ ]+PERL_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
+ apiversion=`awk '/define[ ]+PERL_APIVERSION/ {print $3}' $rsrc/patchlevel.h`
else
patchlevel=0
subversion=0
+ apiversion=0
fi
$echo $n "(You have $package" $c
case "$package" in
echo $baserev $patchlevel $subversion | \
$awk '{ printf "%.5f\n", $1 + $2/1000.0 + $3/100000.0 }'`
fi
-: Figure out perl API version. Perhaps this should be in patchlevel.h
-if test "$subversion" -lt 50; then
- apiversion=`LC_ALL=C; export LC_ALL; \
- LANGUAGE=C; export LANGUAGE; \
- echo $baserev $patchlevel | \
- $awk '{ printf "%.3f\n", $1 + $2/1000.0 }'`
-else
- apiversion="$version"
-fi
+
+: determine installation style
+: For now, try to deduce it from prefix unless it is already set.
+: Reproduce behavior of 5.005 and earlier, maybe drop that in 5.7.
+case "$installstyle" in
+'') case "$prefix" in
+ *perl*) dflt='lib';;
+ *) dflt='lib/perl5' ;;
+ esac
+ ;;
+*) dflt='lib/perl5' ;;
+esac
+: Probably not worth prompting for this since we prompt for all
+: the directories individually, and the prompt would be too long and
+: confusing anyway.
+installstyle=$dflt
: determine where private library files go
: Usual default is /usr/local/lib/perl5/$version.
: Also allow things like /opt/perl/lib/$version, since
: /opt/perl/lib/perl5... would be redundant.
-case "$prefix" in
-*perl*) set dflt privlib lib/$version ;;
-*) set dflt privlib lib/$package/$version ;;
+: The default "style" setting is made in installstyle.U
+case "$installstyle" in
+*lib/perl5*) set dflt privlib lib/$package/$version ;;
+*) set dflt privlib lib/$version ;;
esac
eval $prefixit
$cat <<EOM
fn=d~+
rp='Pathname where the private library files will reside?'
. ./getfile
-if $test "X$privlibexp" != "X$ansexp"; then
- installprivlib=''
-fi
privlib="$ans"
privlibexp="$ansexp"
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-private files reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-
-EOM
- case "$installprivlib" in
- '') dflt=`echo $privlibexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installprivlib";;
- esac
- fn=de~
- rp='Where will private files be installed?'
- . ./getfile
- installprivlib="$ans"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installprivlib=`echo $privlibexp | sed "s#^$prefix#$installprefix#"`
else
installprivlib="$privlibexp"
fi
*) dflt="$archlib"
;;
esac
-cat <<EOM
+$cat <<EOM
$spackage contains architecture-dependent library files. If you are
sharing libraries in a heterogeneous environment, you might store
. ./getfile
archlib="$ans"
archlibexp="$ansexp"
-
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in
-which architecture-dependent library files reside from the directory
-in which they are installed (and from which they are presumably copied
-to the former directory by occult means).
-
-EOM
- case "$installarchlib" in
- '') dflt=`echo $archlibexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installarchlib";;
- esac
- fn=de~
- rp='Where will architecture-dependent library files be installed?'
- . ./getfile
- installarchlib="$ans"
-else
- installarchlib="$archlibexp"
-fi
if $test X"$archlib" = X"$privlib"; then
d_archlib="$undef"
else
d_archlib="$define"
fi
-
-: make some quick guesses about what we are up against
-echo " "
-$echo $n "Hmm... $c"
-echo exit 1 >bsd
-echo exit 1 >usg
-echo exit 1 >v7
-echo exit 1 >osf1
-echo exit 1 >eunice
-echo exit 1 >xenix
-echo exit 1 >venix
-echo exit 1 >os2
-d_bsd="$undef"
-$cat /usr/include/signal.h /usr/include/sys/signal.h >foo 2>/dev/null
-if test -f /osf_boot || $contains 'OSF/1' /usr/include/ctype.h >/dev/null 2>&1
-then
- echo "Looks kind of like an OSF/1 system, but we'll see..."
- echo exit 0 >osf1
-elif test `echo abc | tr a-z A-Z` = Abc ; then
- xxx=`./loc addbib blurfl $pth`
- if $test -f $xxx; then
- echo "Looks kind of like a USG system with BSD features, but we'll see..."
- echo exit 0 >bsd
- echo exit 0 >usg
- else
- if $contains SIGTSTP foo >/dev/null 2>&1 ; then
- echo "Looks kind of like an extended USG system, but we'll see..."
- else
- echo "Looks kind of like a USG system, but we'll see..."
- fi
- echo exit 0 >usg
- fi
-elif $contains SIGTSTP foo >/dev/null 2>&1 ; then
- echo "Looks kind of like a BSD system, but we'll see..."
- d_bsd="$define"
- echo exit 0 >bsd
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installarchlib=`echo $archlibexp | sed "s#^$prefix#$installprefix#"`
else
- echo "Looks kind of like a Version 7 system, but we'll see..."
- echo exit 0 >v7
+ installarchlib="$archlibexp"
fi
-case "$eunicefix" in
-*unixtovms*)
- $cat <<'EOI'
-There is, however, a strange, musty smell in the air that reminds me of
-something...hmm...yes...I've got it...there's a VMS nearby, or I'm a Blit.
-EOI
- echo exit 0 >eunice
- d_eunice="$define"
-: it so happens the Eunice I know will not run shell scripts in Unix format
- ;;
-*)
- echo " "
- echo "Congratulations. You aren't running Eunice."
- d_eunice="$undef"
+
+
+: Binary compatibility with 5.005 is not possible for builds
+: with advanced features
+case "$usethreads$usemultiplicity" in
+*define*)
+ bincompat5005="$undef"
+ d_bincompat5005="$undef"
;;
-esac
-: Detect OS2. The p_ variable is set above in the Head.U unit.
-case "$p_" in
-:) ;;
-*)
- $cat <<'EOI'
-I have the feeling something is not exactly right, however...don't tell me...
-lemme think...does HAL ring a bell?...no, of course, you're only running OS/2!
-EOI
- echo exit 0 >os2
+*) $cat <<EOM
+
+Perl 5.006 can be compiled for binary compatibility with 5.005.
+If you decide to do so, you will be able to continue using most
+of the extensions that were compiled for Perl 5.005.
+
+EOM
+ case "$bincompat5005$d_bincompat5005" in
+ *"$undef"*) dflt=n ;;
+ *) dflt=y ;;
+ esac
+ rp='Binary compatibility with Perl 5.005?'
+ . ./myread
+ case "$ans" in
+ y*) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ set d_bincompat5005
+ eval $setvar
+ case "$d_bincompat5005" in
+ "$define")
+ bincompat5005="$define"
+ ;;
+ *) bincompat5005="$undef"
+ d_bincompat5005="$undef"
+ ;;
+ esac
;;
esac
-if test -f /xenix; then
- echo "Actually, this looks more like a XENIX system..."
- echo exit 0 >xenix
- d_xenix="$define"
-else
- echo " "
- echo "It's not Xenix..."
- d_xenix="$undef"
-fi
-chmod +x xenix
-$eunicefix xenix
-if test -f /venix; then
- echo "Actually, this looks more like a VENIX system..."
- echo exit 0 >venix
-else
- echo " "
- if ./xenix; then
- : null
- else
- echo "Nor is it Venix..."
- fi
-fi
-chmod +x bsd usg v7 osf1 eunice xenix venix os2
-$eunicefix bsd usg v7 osf1 eunice xenix venix os2
-$rm -f foo
+
: see if setuid scripts can be secure
$cat <<EOM
set d_dosuid
eval $setvar
-: determine where manual pages are on this system
+: What should the include directory be ?
echo " "
-case "$sysman" in
-'')
- syspath='/usr/man/man1 /usr/man/mann /usr/man/manl /usr/man/local/man1'
- syspath="$syspath /usr/man/u_man/man1 /usr/share/man/man1"
- syspath="$syspath /usr/catman/u_man/man1 /usr/man/l_man/man1"
- syspath="$syspath /usr/local/man/u_man/man1 /usr/local/man/l_man/man1"
- syspath="$syspath /usr/man/man.L /local/man/man1 /usr/local/man/man1"
- sysman=`./loc . /usr/man/man1 $syspath`
+$echo $n "Hmm... $c"
+dflt='/usr/include'
+incpath=''
+mips_type=''
+if $test -f /bin/mips && /bin/mips; then
+ echo "Looks like a MIPS system..."
+ $cat >usr.c <<'EOCP'
+#ifdef SYSTYPE_BSD43
+/bsd43
+#endif
+EOCP
+ if $cc -E usr.c > usr.out && $contains / usr.out >/dev/null 2>&1; then
+ dflt='/bsd43/usr/include'
+ incpath='/bsd43'
+ mips_type='BSD 4.3'
+ else
+ mips_type='System V'
+ fi
+ $rm -f usr.c usr.out
+ echo "and you're compiling with the $mips_type compiler and libraries."
+ xxx_prompt=y
+ echo "exit 0" >mips
+else
+ echo "Doesn't look like a MIPS system."
+ xxx_prompt=n
+ echo "exit 1" >mips
+fi
+chmod +x mips
+$eunicefix mips
+case "$usrinc" in
+'') ;;
+*) dflt="$usrinc";;
+esac
+case "$xxx_prompt" in
+y) fn=d/
+ echo " "
+ rp='Where are the include files you want to use?'
+ . ./getfile
+ usrinc="$ans"
+ ;;
+*) usrinc="$dflt"
;;
esac
-if $test -d "$sysman"; then
- echo "System manual is in $sysman." >&4
+
+: see how we invoke the C preprocessor
+echo " "
+echo "Now, how can we feed standard input to your C preprocessor..." >&4
+cat <<'EOT' >testcpp.c
+#define ABC abc
+#define XYZ xyz
+ABC.XYZ
+EOT
+cd ..
+if test ! -f cppstdin; then
+ if test "X$osname" = "Xaix" -a "X$gccversion" = X; then
+ # AIX cc -E doesn't show the absolute headerfile
+ # locations but we'll cheat by using the -M flag.
+ echo 'cat >.$$.c; rm -f .$$.u; '"$cc"' ${1+"$@"} -M -c .$$.c 2>/dev/null; test -s .$$.u && awk '"'"'$2 ~ /\.h$/ { print "# 0 \""$2"\"" }'"'"' .$$.u; rm -f .$$.o .$$.u; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' > cppstdin
+ else
+ echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
+ fi
else
- echo "Could not find manual pages in source form." >&4
+ echo "Keeping your $hint cppstdin wrapper."
fi
-
-: see what memory models we can support
-case "$models" in
-'')
- $cat >pdp11.c <<'EOP'
-int main() {
-#ifdef pdp11
- exit(0);
-#else
- exit(1);
-#endif
-}
-EOP
- ( cc -o pdp11 pdp11.c ) >/dev/null 2>&1
- if $test -f pdp11 && ./pdp11 2>/dev/null; then
- dflt='unsplit split'
- else
- tans=`./loc . X /lib/small /lib/large /usr/lib/small /usr/lib/large /lib/medium /usr/lib/medium /lib/huge`
- case "$tans" in
- X) dflt='none';;
- *) if $test -d /lib/small || $test -d /usr/lib/small; then
- dflt='small'
- else
- dflt=''
- fi
- if $test -d /lib/medium || $test -d /usr/lib/medium; then
- dflt="$dflt medium"
- fi
- if $test -d /lib/large || $test -d /usr/lib/large; then
- dflt="$dflt large"
- fi
- if $test -d /lib/huge || $test -d /usr/lib/huge; then
- dflt="$dflt huge"
- fi
- esac
- fi;;
-*) dflt="$models";;
-esac
-$cat <<EOM
-
-Some systems have different model sizes. On most systems they are called
-small, medium, large, and huge. On the PDP11 they are called unsplit and
-split. If your system doesn't support different memory models, say "none".
-If you wish to force everything to one memory model, say "none" here and
-put the appropriate flags later when it asks you for other cc and ld flags.
-Venix systems may wish to put "none" and let the compiler figure things out.
-(In the following question multiple model names should be space separated.)
-
-The default for most systems is "none".
-
-EOM
-rp="Which memory models are supported?"
-. ./myread
-models="$ans"
-
-case "$models" in
-none)
- small=''
- medium=''
- large=''
- huge=''
- unsplit=''
- split=''
- ;;
-*split)
- case "$split" in
- '') if $contains '\-i' $sysman/ld.1 >/dev/null 2>&1 || \
- $contains '\-i' $sysman/cc.1 >/dev/null 2>&1; then
- dflt='-i'
- else
- dflt='none'
- fi;;
- *) dflt="$split";;
- esac
- rp="What flag indicates separate I and D space?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';;
- esac
- split="$tans"
- unsplit='';;
-*large*|*small*|*medium*|*huge*)
- case "$models" in
- *large*)
- case "$large" in
- '') dflt='-Ml';;
- *) dflt="$large";;
- esac
- rp="What flag indicates large model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- large="$tans";;
- *) large='';;
- esac
- case "$models" in
- *huge*) case "$huge" in
- '') dflt='-Mh';;
- *) dflt="$huge";;
- esac
- rp="What flag indicates huge model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- huge="$tans";;
- *) huge="$large";;
- esac
- case "$models" in
- *medium*) case "$medium" in
- '') dflt='-Mm';;
- *) dflt="$medium";;
- esac
- rp="What flag indicates medium model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- medium="$tans";;
- *) medium="$large";;
- esac
- case "$models" in
- *small*) case "$small" in
- '') dflt='none';;
- *) dflt="$small";;
- esac
- rp="What flag indicates small model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- small="$tans";;
- *) small='';;
- esac
- ;;
-*)
- echo "Unrecognized memory models--you may have to edit Makefile.SH" >&4
- ;;
-esac
-$rm -f pdp11.* pdp11
-
-: see if we need a special compiler
-echo " "
-if ./usg; then
- case "$cc" in
- '') case "$Mcc" in
- /*) dflt='Mcc';;
- *) case "$large" in
- -M*) dflt='cc';;
- *) if $contains '\-M' $sysman/cc.1 >/dev/null 2>&1 ; then
- if $contains '\-M' $sysman/cpp.1 >/dev/null 2>&1; then
- dflt='cc'
- else
- dflt='cc -M'
- fi
- else
- dflt='cc'
- fi;;
- esac;;
- esac;;
- *) dflt="$cc";;
- esac
- case "$dflt" in
- *M*) $cat <<'EOM'
-On some older systems the default C compiler will not resolve multiple global
-references that happen to have the same name. On some such systems the "Mcc"
-command may be used to force these to be resolved. On other systems a "cc -M"
-command is required. (Note that the -M flag on other systems indicates a
-memory model to use!) If you have the Gnu C compiler, you might wish to use
-that instead.
-
-EOM
- ;;
- esac
- rp="Use which C compiler?"
- . ./myread
- cc="$ans"
-else
- case "$cc" in
- '') dflt=cc;;
- *) dflt="$cc";;
- esac
- rp="Use which C compiler?"
- . ./myread
- cc="$ans"
-fi
-: Look for a hint-file generated 'call-back-unit'. Now that the
-: user has specified the compiler, we may need to set or change some
-: other defaults.
-if $test -f cc.cbu; then
- . ./cc.cbu
-fi
-echo " "
-echo "Checking for GNU cc in disguise and/or its version number..." >&4
-$cat >gccvers.c <<EOM
-#include <stdio.h>
-int main() {
-#ifdef __GNUC__
-#ifdef __VERSION__
- printf("%s\n", __VERSION__);
-#else
- printf("%s\n", "1");
-#endif
-#endif
- exit(0);
-}
-EOM
-if $cc -o gccvers gccvers.c; then
- gccversion=`./gccvers`
- case "$gccversion" in
- '') echo "You are not using GNU cc." ;;
- *) echo "You are using GNU cc $gccversion." ;;
- esac
-else
- echo " "
- echo "*** WHOA THERE!!! ***" >&4
- echo " Your C compiler \"$cc\" doesn't seem to be working!" >&4
- case "$knowitall" in
- '')
- echo " You'd better start hunting for one and let me know about it." >&4
- exit 1
- ;;
- esac
-fi
-$rm -f gccvers*
-case "$gccversion" in
-1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
-esac
-
-: What should the include directory be ?
-echo " "
-$echo $n "Hmm... $c"
-dflt='/usr/include'
-incpath=''
-mips_type=''
-if $test -f /bin/mips && /bin/mips; then
- echo "Looks like a MIPS system..."
- $cat >usr.c <<'EOCP'
-#ifdef SYSTYPE_BSD43
-/bsd43
-#endif
-EOCP
- if $cc -E usr.c > usr.out && $contains / usr.out >/dev/null 2>&1; then
- dflt='/bsd43/usr/include'
- incpath='/bsd43'
- mips_type='BSD 4.3'
- else
- mips_type='System V'
- fi
- $rm -f usr.c usr.out
- echo "and you're compiling with the $mips_type compiler and libraries."
- xxx_prompt=y
- echo "exit 0" >mips
-else
- echo "Doesn't look like a MIPS system."
- xxx_prompt=n
- echo "exit 1" >mips
-fi
-chmod +x mips
-$eunicefix mips
-case "$usrinc" in
-'') ;;
-*) dflt="$usrinc";;
-esac
-case "$xxx_prompt" in
-y) fn=d/
- echo " "
- rp='Where are the include files you want to use?'
- . ./getfile
- usrinc="$ans"
- ;;
-*) usrinc="$dflt"
- ;;
-esac
-
-: see how we invoke the C preprocessor
-echo " "
-echo "Now, how can we feed standard input to your C preprocessor..." >&4
-cat <<'EOT' >testcpp.c
-#define ABC abc
-#define XYZ xyz
-ABC.XYZ
-EOT
-cd ..
-if test ! -f cppstdin; then
- echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
-else
- echo "Keeping your $hint cppstdin wrapper."
-fi
-chmod 755 cppstdin
-wrapper=`pwd`/cppstdin
-ok='false'
-cd UU
+chmod 755 cppstdin
+wrapper=`pwd`/cppstdin
+ok='false'
+cd UU
if $test "X$cppstdin" != "X" && \
$cppstdin $cppminus <testcpp.c >testcpp.out 2>&1 && \
*) libs="$ans";;
esac
-: determine optimize, if desired, or use for debug flag also
+: determine optimization, if desired, or use for debug flag also
case "$optimize" in
' '|$undef) dflt='none';;
'') dflt='-O';;
esac
$cat <<EOH
-Some C compilers have problems with their optimizers. By default, $package
-compiles with the -O flag to use the optimizer. Alternately, you might want
-to use the symbolic debugger, which uses the -g flag (on traditional Unix
-systems). Either flag can be specified here. To use neither flag, specify
-the word "none".
+By default, $package compiles with the -O flag to use the optimizer.
+Alternately, you might want to use the symbolic debugger, which uses
+the -g flag (on traditional Unix systems). Either flag can be
+specified here. To use neither flag, specify the word "none".
EOH
rp="What optimizer/debugger flag should be used?"
: We will not override a previous value, but we might want to
: augment a hint file
case "$hint" in
-none|recommended)
+default|recommended)
case "$gccversion" in
1*) dflt='-fpcc-struct-return' ;;
esac
fi
;;
esac
+ case "$gccversion" in
+ 1*) ;;
+ 2.[0-8]*) ;;
+ ?*) echo " "
+ echo "Checking if your compiler accepts -fno-strict-aliasing" 2>&1
+ echo 'int main(void) { return 0; }' > gcctest.c
+ if $cc -O2 -fno-strict-aliasing -o gcctest gcctest.c; then
+ echo "Yes, it does." 2>&1
+ case "$ccflags" in
+ *strict-aliasing*)
+ echo "Leaving current flags $ccflags alone." 2>&1
+ ;;
+ *) dflt="$dflt -fno-strict-aliasing" ;;
+ esac
+ else
+ echo "Nope, it doesn't, but that's ok." 2>&1
+ fi
+ ;;
+ esac
;;
esac
esac
case "$hint" in
-none|recommended) dflt="$ccflags $dflt" ;;
+default|recommended) dflt="$ccflags $dflt" ;;
*) dflt="$ccflags";;
esac
esac
echo "Your system uses $freetype free(), it would seem." >&4
$rm -f malloc.[co]
+$cat <<EOM
+
+The installation process will also create a directory for
+vendor-supplied add-ons. Vendors who supply perl with their system
+may find it convenient to place all vendor-supplied files in this
+directory rather than in the main distribution directory. This will
+ease upgrades between binary-compatible maintenance versions of perl.
+
+Of course you may also use these directories in whatever way you see
+fit. For example, you might use them to access modules shared over a
+company-wide network.
+
+The default answer should be fine for most people.
+This causes further questions about vendor add-ons to be skipped
+and no vendor-specific directories will be configured for perl.
+
+EOM
+rp='Do you want to configure vendor-specific add-on directories?'
+case "$usevendorprefix" in
+define|true|[yY]*) dflt=y ;;
+*) dflt=n ;;
+esac
+. ./myread
+case "$ans" in
+[yY]*) fn=d~+
+ rp='Installation prefix to use for vendor-supplied add-ons?'
+ case "$vendorprefix" in
+ '') dflt='' ;;
+ *) dflt=$vendorprefix ;;
+ esac
+ . ./getfile
+ oldvendorprefix=''
+ case "$vendorprefix" in
+ '') ;;
+ *) case "$ans" in
+ "$prefix") ;;
+ *) oldvendorprefix="$prefix";;
+ esac
+ ;;
+ esac
+ usevendorprefix="$define"
+ vendorprefix="$ans"
+ vendorprefixexp="$ansexp"
+ ;;
+*) usevendorprefix="$undef"
+ vendorprefix=''
+ vendorprefixexp=''
+ ;;
+esac
+
+case "$vendorprefix" in
+'') d_vendorlib="$undef"
+ vendorlib=''
+ vendorlibexp=''
+ ;;
+*) d_vendorlib="$define"
+ : determine where vendor-supplied modules go.
+ : Usual default is /usr/local/lib/perl5/vendor_perl
+ prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+ case "$installstyle" in
+ *lib/perl5*) dflt=$vendorprefix/lib/$package/vendor_$prog ;;
+ *) dflt=$vendorprefix/lib/vendor_$prog ;;
+ esac
+ fn=d~+
+ rp='Pathname for the vendor-supplied library files?'
+ . ./getfile
+ vendorlib="$ans"
+ vendorlibexp="$ansexp"
+ : Change installation prefix, if necessary.
+ if $test X"$prefix" != X"$installprefix"; then
+ installvendorlib=`echo $vendorlibexp | $sed "s#^$prefix#$installprefix#"`
+ else
+ installvendorlib="$vendorlibexp"
+ fi
+ ;;
+esac
+
: Cruising for prototypes
echo " "
echo "Checking out function prototypes..." >&4
fi
bin="$ans"
binexp="$ansexp"
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-executables reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-
-EOM
- case "$installbin" in
- '') dflt=`echo $binexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installbin";;
- esac
- fn=de~
- rp='Where will public executables be installed?'
- . ./getfile
- installbin="$ans"
+: Change installation prefix, if necessary.
+: XXX Bug? -- ignores Configure -Dinstallprefix setting.
+if $test X"$prefix" != X"$installprefix"; then
+ installbin=`echo $binexp | sed "s#^$prefix#$installprefix#"`
else
installbin="$binexp"
fi
: determine whether to install perl also as /usr/bin/perl
echo " "
-if test -d /usr/bin -a "X$installbin" != X/usr/bin; then
+if $test -d /usr/bin -a "X$installbin" != X/usr/bin; then
$cat <<EOM
Many scripts expect to perl to be installed as /usr/bin/perl.
I can install the perl you are about to compile also as /usr/bin/perl
tdir=`pwd`; cd $rsrc; $ls -C $dldir/dl*.xs; cd $tdir
rp="Source file to use for dynamic loading"
fn="fne"
- # XXX This getfile call will fail the existence check if you try
- # building away from $src (this is not supported yet).
+ gfpth="$src"
. ./getfile
usedl="$define"
: emulate basename
. ./myread
case "$ans" in
true|$define|[Yy]*)
- useshrplib='true'
- # Why does next4 have to be so different?
- case "${osname}${osvers}" in
- next4*|rhapsody*)
- xxx='DYLD_LIBRARY_PATH' ;;
- os2*) xxx='' ;; # Nothing special needed.
- beos*) xxx='' ;;
- *) xxx='LD_LIBRARY_PATH' ;;
- esac
- ;;
+ useshrplib='true' ;;
*) useshrplib='false' ;;
esac
;;
;;
esac
fi
+# Fix ccdlflags in AIX for building external extensions.
+# (For building Perl itself bare -bE:perl.exp is needed,
+# Makefile.SH takes care of this.)
+case "$osname" in
+aix) ccdlflags="$ccdlflags -bE:$installarchlib/CORE/perl.exp" ;;
+esac
# Respect a hint or command-line value.
case "$shrpenv" in
'') shrpenv="$tmp_shrpenv" ;;
esac
+case "$ldlibpthname" in
+'') ldlibpthname=LD_LIBRARY_PATH ;;
+none) ldlibpthname='' ;;
+esac
: determine where manual pages go
set man1dir man1dir none
man1dir="$ans"
man1direxp="$ansexp"
case "$man1dir" in
-'') man1dir=' '
+'') man1dir=' '
installman1dir='';;
esac
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-manual pages reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-EOM
- case "$installman1dir" in
- '') dflt=`echo $man1direxp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installman1dir";;
- esac
- fn=de~
- rp='Where will man pages be installed?'
- . ./getfile
- installman1dir="$ans"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installman1dir=`echo $man1direxp | $sed "s#^$prefix#$installprefix#"`
else
installman1dir="$man1direxp"
fi
echo "If you don't want the manual sources installed, answer 'none'."
prog=`echo $package | $sed 's/-*[0-9.]*$//'`
case "$man3dir" in
-'') case "$prefix" in
- *$prog*) dflt=`echo $man1dir |
- $sed -e 's/man1/man3/g' -e 's/man\.1/man\.3/g'` ;;
- *) dflt="$privlib/man/man3" ;;
- esac
+'') dflt=`echo $man1dir | $sed -e 's/man1/man3/g' -e 's/man\.1/man\.3/g'`
+ if $test -d "$privlib/man/man3"; then
+ cat <<EOM >&4
+
+WARNING: Previous versions of perl installed man3 pages into
+$privlib/man/man3. This version will suggest a
+new default of $dflt.
+EOM
+ tdflt=$dflt
+ dflt='n'
+ rp='Do you wish to preserve the old behavior?(y/n)'
+ . ./myread
+ case "$ans" in
+ y*) dflt="$privlib/man/man3" ;;
+ *) dflt=$tdflt ;;
+ esac
+ fi
;;
' ') dflt=none;;
*) dflt="$man3dir" ;;
esac
echo " "
-
fn=dn+~
rp="Where do the $package library man pages (source) go?"
. ./getfile
-if test "X$man3direxp" != "X$ansexp"; then
- installman3dir=''
-fi
-
man3dir="$ans"
man3direxp="$ansexp"
-case "$man3dir" in
-'') man3dir=' '
+case "$man1dir" in
+'') man3dir=' '
installman3dir='';;
esac
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-manual pages reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-EOM
- case "$installman3dir" in
- '') dflt=`echo $man3direxp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installman3dir";;
- esac
- fn=de~
- rp='Where will man pages be installed?'
- . ./getfile
- installman3dir="$ans"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installman3dir=`echo $man3direxp | $sed "s#^$prefix#$installprefix#"`
else
installman3dir="$man3direxp"
fi
: What suffix to use on installed man pages
-
case "$man3dir" in
' ')
man3ext='0'
.*) ;;
*) tans=".$tans";;
esac
-mydomain="$tans"
+mydomain="$tans"
+
+: translate upper to lower if necessary
+case "$mydomain" in
+*[A-Z]*)
+ echo "(Normalizing case in your domain name)"
+ mydomain=`echo $mydomain | ./tr '[A-Z]' '[a-z]'`
+ ;;
+esac
+
+: a little sanity check here
+case "$phostname" in
+'') ;;
+*)
+ case `$phostname | ./tr '[A-Z]' '[a-z]'` in
+ $myhostname$mydomain|$myhostname) ;;
+ *)
+ case "$phostname" in
+ sed*)
+ echo "(That doesn't agree with your whoami.h file, by the way.)"
+ ;;
+ *)
+ echo "(That doesn't agree with your $phostname command, by the way.)"
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
+$cat <<EOM
+
+I need to get your e-mail address in Internet format if possible, i.e.
+something like user@host.domain. Please answer accurately since I have
+no easy means to double check it. The default value provided below
+is most probably close to the reality but may not be valid from outside
+your organization...
+
+EOM
+cont=x
+while test "$cont"; do
+ case "$cf_email" in
+ '') dflt="$cf_by@$myhostname$mydomain";;
+ *) dflt="$cf_email";;
+ esac
+ rp='What is your e-mail address?'
+ . ./myread
+ cf_email="$ans"
+ case "$cf_email" in
+ *@*.*) cont='' ;;
+ *)
+ rp='Address does not look like an Internet one. Use it anyway?'
+ case "$fastread" in
+ yes) dflt=y ;;
+ *) dflt=n ;;
+ esac
+ . ./myread
+ case "$ans" in
+ y*) cont='' ;;
+ *) echo " " ;;
+ esac
+ ;;
+ esac
+done
+
+$cat <<EOM
+
+If you or somebody else will be maintaining perl at your site, please
+fill in the correct e-mail address here so that they may be contacted
+if necessary. Currently, the "perlbug" program included with perl
+will send mail to this address in addition to perlbug@perl.com. You may
+enter "none" for no administrator.
+
+EOM
+case "$perladmin" in
+'') dflt="$cf_email";;
+*) dflt="$perladmin";;
+esac
+rp='Perl administrator e-mail address'
+. ./myread
+perladmin="$ans"
+
+: figure out how to guarantee perl startup
+case "$startperl" in
+'')
+ case "$sharpbang" in
+ *!)
+ $cat <<EOH
+
+I can use the #! construct to start perl on your system. This will
+make startup of perl scripts faster, but may cause problems if you
+want to share those scripts and perl is not in a standard place
+($binexp/perl) on all your platforms. The alternative is to force
+a shell by starting the script with a single ':' character.
+
+EOH
+ dflt="$binexp/perl"
+ rp='What shall I put after the #! to start up perl ("none" to not use #!)?'
+ . ./myread
+ case "$ans" in
+ none) startperl=": # use perl";;
+ *) startperl="#!$ans"
+ if $test 30 -lt `echo "$ans" | wc -c`; then
+ $cat >&4 <<EOM
+
+WARNING: Some systems limit the #! command to 32 characters.
+If you experience difficulty running Perl scripts with #!, try
+installing Perl in a directory with a shorter pathname.
+
+EOM
+ fi ;;
+ esac
+ ;;
+ *) startperl=": # use perl"
+ ;;
+ esac
+ ;;
+esac
+echo "I'll use $startperl to start perl scripts."
+
+: figure best path for perl in scripts
+case "$perlpath" in
+'')
+ perlpath="$binexp/perl"
+ case "$startperl" in
+ *!*) ;;
+ *)
+ $cat <<EOH
+
+I will use the "eval 'exec'" idiom to start Perl on your system.
+I can use the full path of your Perl binary for this purpose, but
+doing so may cause problems if you want to share those scripts and
+Perl is not always in a standard place ($binexp/perl).
+
+EOH
+ dflt="$binexp/perl"
+ rp="What path shall I use in \"eval 'exec'\"?"
+ . ./myread
+ perlpath="$ans"
+ ;;
+ esac
+ ;;
+esac
+case "$startperl" in
+*!*) ;;
+*) echo "I'll use $perlpath in \"eval 'exec'\"" ;;
+esac
-: translate upper to lower if necessary
-case "$mydomain" in
-*[A-Z]*)
- echo "(Normalizing case in your domain name)"
- mydomain=`echo $mydomain | ./tr '[A-Z]' '[a-z]'`
+: determine where public executable scripts go
+set scriptdir scriptdir
+eval $prefixit
+case "$scriptdir" in
+'')
+ dflt="$bin"
+ : guess some guesses
+ $test -d /usr/share/scripts && dflt=/usr/share/scripts
+ $test -d /usr/share/bin && dflt=/usr/share/bin
+ $test -d /usr/local/script && dflt=/usr/local/script
+ $test -d /usr/local/scripts && dflt=/usr/local/scripts
+ $test -d $prefixexp/script && dflt=$prefixexp/script
+ set dflt
+ eval $prefixup
+ ;;
+*) dflt="$scriptdir"
;;
esac
+$cat <<EOM
+
+Some installations have a separate directory just for executable scripts so
+that they can mount it across multiple architectures but keep the scripts in
+one spot. You might, for example, have a subdirectory of /usr/share for this.
+Or you might just lump your scripts in with all your other executables.
+
+EOM
+fn=d~
+rp='Where do you keep publicly executable scripts?'
+. ./getfile
+if $test "X$ansexp" != "X$scriptdirexp"; then
+ installscript=''
+fi
+scriptdir="$ans"
+scriptdirexp="$ansexp"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installscript=`echo $scriptdirexp | sed "s#^$prefix#$installprefix#"`
+else
+ installscript="$scriptdirexp"
+fi
-: a little sanity check here
-case "$phostname" in
+$cat <<EOM
+
+After $package is installed, you may wish to install various
+add-on modules and utilities. Typically, these add-ons will
+be installed under $prefix with the rest
+of this package. However, you may wish to install such add-ons
+elsewhere under a different prefix.
+
+If you do not wish to put everything under a single prefix, that's
+ok. You will be prompted for the individual locations; this siteprefix
+is only used to suggest the defaults.
+
+The default should be fine for most people.
+
+EOM
+fn=d~+
+rp='Installation prefix to use for add-on modules and utilities?'
+: XXX Here might be another good place for an installstyle setting.
+case "$siteprefix" in
+'') dflt=$prefix ;;
+*) dflt=$siteprefix ;;
+esac
+. ./getfile
+oldsiteprefix=''
+case "$siteprefix" in
'') ;;
*)
- case `$phostname | ./tr '[A-Z]' '[a-z]'` in
- $myhostname$mydomain|$myhostname) ;;
- *)
- case "$phostname" in
- sed*)
- echo "(That doesn't agree with your whoami.h file, by the way.)"
- ;;
- *)
- echo "(That doesn't agree with your $phostname command, by the way.)"
- ;;
- esac
- ;;
+ case "$ans" in
+ "$prefix") ;;
+ *) oldsiteprefix="$prefix";;
esac
;;
esac
+siteprefix="$ans"
+siteprefixexp="$ansexp"
+: determine where site specific libraries go.
+: Usual default is /usr/local/lib/perl5/site_perl
+: The default "style" setting is made in installstyle.U
+: XXX No longer works with Prefixit stuff.
+prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+case "$installstyle" in
+*lib/perl5*) dflt=$siteprefix/lib/site_$prog ;;
+*) dflt=$siteprefix/lib/site_$prog ;;
+esac
$cat <<EOM
-I need to get your e-mail address in Internet format if possible, i.e.
-something like user@host.domain. Please answer accurately since I have
-no easy means to double check it. The default value provided below
-is most probably close to the reality but may not be valid from outside
-your organization...
+The installation process will create a directory for
+site-specific extensions and modules. Most users find it convenient
+to place all site-specific files in this directory rather than in the
+main distribution directory.
EOM
-cont=x
-while test "$cont"; do
- case "$cf_email" in
- '') dflt="$cf_by@$myhostname$mydomain";;
- *) dflt="$cf_email";;
- esac
- rp='What is your e-mail address?'
- . ./myread
- cf_email="$ans"
- case "$cf_email" in
- *@*.*) cont='' ;;
- *)
- rp='Address does not look like an Internet one. Use it anyway?'
- case "$fastread" in
- yes) dflt=y ;;
- *) dflt=n ;;
- esac
- . ./myread
- case "$ans" in
- y*) cont='' ;;
- *) echo " " ;;
- esac
- ;;
- esac
-done
+fn=d~+
+rp='Pathname for the site-specific library files?'
+. ./getfile
+sitelib="$ans"
+sitelibexp="$ansexp"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitelib=`echo $sitelibexp | sed "s#^$prefix#$installprefix#"`
+else
+ installsitelib="$sitelibexp"
+fi
+: determine where site specific architecture-dependent libraries go.
+: sitelib default is /usr/local/lib/perl5/site_perl/
+: sitearch default is /usr/local/lib/perl5/site_perl/$apiversion/$archname
+: sitelib may have an optional trailing /share.
+tdflt=`echo $sitelib | $sed 's,/share$,,'`
+tdflt="$tdflt/$apiversion/$archname"
+set sitearch sitearch none
+eval $prefixit
+case "$sitearch" in
+'') dflt="$tdflt" ;;
+*) dflt="$sitearch" ;;
+esac
$cat <<EOM
-If you or somebody else will be maintaining perl at your site, please
-fill in the correct e-mail address here so that they may be contacted
-if necessary. Currently, the "perlbug" program included with perl
-will send mail to this address in addition to perlbug@perl.com. You may
-enter "none" for no administrator.
+The installation process will also create a directory for
+architecture-dependent site-specific extensions and modules.
EOM
-case "$perladmin" in
-'') dflt="$cf_email";;
-*) dflt="$perladmin";;
+fn=nd~+
+rp='Pathname for the site-specific architecture-dependent library files?'
+. ./getfile
+sitearch="$ans"
+sitearchexp="$ansexp"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitearch=`echo $sitearchexp | sed "s#^$prefix#$installprefix#"`
+else
+ installsitearch="$sitearchexp"
+fi
+
+: determine where add-on public executables go
+case "$sitebin" in
+'') dflt=$siteprefix/bin ;;
+*) dflt=$sitebin ;;
esac
-rp='Perl administrator e-mail address'
+fn=d~
+rp='Pathname where the add-on public executables should be installed?'
+. ./getfile
+sitebin="$ans"
+sitebinexp="$ansexp"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitebin=`echo $sitebinexp | sed "s#^$prefix#$installprefix#"`
+else
+ installsitebin="$sitebinexp"
+fi
+
+cat <<EOM
+
+Perl can be built to take advantage of long doubles which
+(if available) may give more accuracy and range for floating point
+numbers. To do so, Configure must be run with -Duselongdouble.
+
+If this doesn't make any sense to you, just accept the default 'n'.
+EOM
+case "$uselongdouble" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+rp='Try to use long doubles if available?'
. ./myread
-perladmin="$ans"
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set uselongdouble
+eval $setvar
-: figure out how to guarantee perl startup
-case "$startperl" in
-'')
- case "$sharpbang" in
- *!)
- $cat <<EOH
+case "$uselongdouble" in
+"$define"|true|[yY]*)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that long doubles should be used,
+: we may need to set or change some other defaults.
+ if $test -f uselongdouble.cbu; then
+ echo "Your platform has some specific hints for long doubles, using them..."
+ . ./uselongdouble.cbu
+ else
+ $cat <<EOM
+(Your platform doesn't have any specific hints for long doubles.)
+EOM
+ fi
+ ;;
+esac
-I can use the #! construct to start perl on your system. This will
-make startup of perl scripts faster, but may cause problems if you
-want to share those scripts and perl is not in a standard place
-($binexp/perl) on all your platforms. The alternative is to force
-a shell by starting the script with a single ':' character.
+cat <<EOM
+
+Previous version of $package used the standard IO mechanisms as defined
+in <stdio.h>. Versions 5.003_02 and later of perl allow alternate IO
+mechanisms via a "PerlIO" abstraction, but the stdio mechanism is still
+the default. This abstraction layer can use AT&T's sfio (if you already
+have sfio installed) or regular stdio. Using PerlIO with sfio may cause
+problems with some extension modules. Using PerlIO with stdio is safe,
+but it is slower than plain stdio and therefore is not the default.
+
+If this doesn't make any sense to you, just accept the default 'n'.
+EOM
+case "$useperlio" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+rp='Use the experimental PerlIO abstraction layer?'
+. ./myread
+case "$ans" in
+y|Y)
+ val="$define"
+ ;;
+*)
+ echo "Ok, doing things the stdio way"
+ val="$undef"
+ ;;
+esac
+set useperlio
+eval $setvar
+
+case "$vendorprefix" in
+'') d_vendorbin="$undef"
+ vendorbin=''
+ vendorbinexp=''
+ ;;
+*) d_vendorbin="$define"
+ : determine where vendor-supplied executables go.
+ dflt=$vendorprefix/bin
+ fn=d~+
+ rp='Pathname for the vendor-supplied executables directory?'
+ . ./getfile
+ vendorbin="$ans"
+ vendorbinexp="$ansexp"
+ : Change installation prefix, if necessary.
+ if $test X"$prefix" != X"$installprefix"; then
+ installvendorbin=`echo $vendorbinexp | $sed "s#^$prefix#$installprefix#"`
+ else
+ installvendorbin="$vendorbinexp"
+ fi
+ ;;
+esac
+
+: Check how to convert floats to strings.
+if test "X$d_Gconvert" = X; then
+ echo " "
+ echo "Checking for an efficient way to convert floats to strings."
+ $cat >try.c <<'EOP'
+#ifdef TRY_gconvert
+#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
+char *myname = "gconvert";
+#endif
+#ifdef TRY_gcvt
+#define Gconvert(x,n,t,b) gcvt((x),(n),(b))
+char *myname = "gcvt";
+#endif
+#ifdef TRY_sprintf
+#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
+char *myname = "sprintf";
+#endif
+
+#include <stdio.h>
+
+int
+checkit(expect, got)
+char *expect;
+char *got;
+{
+ if (strcmp(expect, got)) {
+ printf("%s oddity: Expected %s, got %s\n",
+ myname, expect, got);
+ exit(1);
+ }
+}
+
+int main()
+{
+ char buf[64];
+ buf[63] = '\0';
+
+ /* This must be 1st test on (which?) platform */
+ /* Alan Burlison <AlanBurlsin@unn.unisys.com> */
+ Gconvert(0.1, 8, 0, buf);
+ checkit("0.1", buf);
+
+ Gconvert(1.0, 8, 0, buf);
+ checkit("1", buf);
-EOH
- dflt="$binexp/perl"
- rp='What shall I put after the #! to start up perl ("none" to not use #!)?'
- . ./myread
- case "$ans" in
- none) startperl=": # use perl";;
- *) startperl="#!$ans"
- if $test 30 -lt `echo "$ans" | wc -c`; then
- $cat >&4 <<EOM
+ Gconvert(0.0, 8, 0, buf);
+ checkit("0", buf);
-WARNING: Some systems limit the #! command to 32 characters.
-If you experience difficulty running Perl scripts with #!, try
-installing Perl in a directory with a shorter pathname.
+ Gconvert(-1.0, 8, 0, buf);
+ checkit("-1", buf);
-EOM
- fi ;;
- esac
- ;;
- *) startperl=": # use perl"
- ;;
+ /* Some Linux gcvt's give 1.e+5 here. */
+ Gconvert(100000.0, 8, 0, buf);
+ checkit("100000", buf);
+
+ /* Some Linux gcvt's give -1.e+5 here. */
+ Gconvert(-100000.0, 8, 0, buf);
+ checkit("-100000", buf);
+
+ exit(0);
+}
+EOP
+ case "$d_Gconvert" in
+ gconvert*) xxx_list='gconvert gcvt sprintf' ;;
+ gcvt*) xxx_list='gcvt gconvert sprintf' ;;
+ sprintf*) xxx_list='sprintf gconvert gcvt' ;;
+ *) xxx_list='gconvert gcvt sprintf' ;;
esac
- ;;
-esac
-echo "I'll use $startperl to start perl scripts."
-: figure best path for perl in scripts
-case "$perlpath" in
-'')
- perlpath="$binexp/perl"
- case "$startperl" in
- *!*) ;;
- *)
- $cat <<EOH
+ for xxx_convert in $xxx_list; do
+ echo "Trying $xxx_convert"
+ $rm -f try try$_o
+ set try -DTRY_$xxx_convert
+ if eval $compile; then
+ echo "$xxx_convert" found. >&4
+ if ./try; then
+ echo "I'll use $xxx_convert to convert floats into a string." >&4
+ break;
+ else
+ echo "...But $xxx_convert didn't work as I expected."
+ fi
+ else
+ echo "$xxx_convert NOT found." >&4
+ fi
+ done
+
+ case "$xxx_convert" in
+ gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
+ gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
+ *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
+ esac
+fi
-I will use the "eval 'exec'" idiom to start Perl on your system.
-I can use the full path of your Perl binary for this purpose, but
-doing so may cause problems if you want to share those scripts and
-Perl is not always in a standard place ($binexp/perl).
+: see if inttypes.h is available
+: we want a real compile instead of Inhdr because some systems
+: have an inttypes.h which includes non-existent headers
+echo " "
+$cat >try.c <<EOCP
+#include <inttypes.h>
+int main() {
+ static int32_t foo32 = 0x12345678;
+}
+EOCP
+set try
+if eval $compile; then
+ echo "<inttypes.h> found." >&4
+ val="$define"
+else
+ echo "<inttypes.h> NOT found." >&4
+ val="$undef"
+fi
+$rm -f try.c try
+set i_inttypes
+eval $setvar
-EOH
- dflt="$binexp/perl"
- rp="What path shall I use in \"eval 'exec'\"?"
- . ./myread
- perlpath="$ans"
- ;;
- esac
+: check for int64_t
+case "$use64bits" in
+"$define" )
+ echo " "
+ $echo $n "Checking to see if your system supports int64_t...$c" >&4
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+#$i_inttypes I_INTTYPES
+#ifdef I_INTTYPES
+#include <inttypes.h>
+#endif
+int64_t foo() { int64_t x; x = 7; return x; }
+EOCP
+ if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define"
+ echo " Yup, it does." >&4
+ else
+ val="$undef"
+ echo " Nope, it doesn't." >&4
+ fi
+ $rm -f try.*
+ ;;
+*) val="$undef"
;;
esac
-case "$startperl" in
-*!*) ;;
-*) echo "I'll use $perlpath in \"eval 'exec'\"" ;;
-esac
+set d_int64t
+eval $setvar
-: determine where public executable scripts go
-set scriptdir scriptdir
-eval $prefixit
-case "$scriptdir" in
+
+: check for lengths of integral types
+echo " "
+case "$intsize" in
'')
- dflt="$bin"
- : guess some guesses
- $test -d /usr/share/scripts && dflt=/usr/share/scripts
- $test -d /usr/share/bin && dflt=/usr/share/bin
- $test -d /usr/local/script && dflt=/usr/local/script
- $test -d $prefixexp/script && dflt=$prefixexp/script
- set dflt
- eval $prefixup
- ;;
-*) dflt="$scriptdir"
+ echo "Checking to see how big your integers are..." >&4
+ $cat >intsize.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("intsize=%d;\n", sizeof(int));
+ printf("longsize=%d;\n", sizeof(long));
+ printf("shortsize=%d;\n", sizeof(short));
+ exit(0);
+}
+EOCP
+ set intsize
+ if eval $compile_ok && ./intsize > /dev/null; then
+ eval `./intsize`
+ echo "Your integers are $intsize bytes long."
+ echo "Your long integers are $longsize bytes long."
+ echo "Your short integers are $shortsize bytes long."
+ else
+ $cat >&4 <<EOM
+!
+Help! I can't compile and run the intsize test program: please enlighten me!
+(This is probably a misconfiguration in your system or libraries, and
+you really ought to fix it. Still, I'll try anyway.)
+!
+EOM
+ dflt=4
+ rp="What is the size of an integer (in bytes)?"
+ . ./myread
+ intsize="$ans"
+ dflt=$intsize
+ rp="What is the size of a long integer (in bytes)?"
+ . ./myread
+ longsize="$ans"
+ dflt=2
+ rp="What is the size of a short integer (in bytes)?"
+ . ./myread
+ shortsize="$ans"
+ fi
;;
esac
-$cat <<EOM
-
-Some installations have a separate directory just for executable scripts so
-that they can mount it across multiple architectures but keep the scripts in
-one spot. You might, for example, have a subdirectory of /usr/share for this.
-Or you might just lump your scripts in with all your other executables.
-
-EOM
-fn=d~
-rp='Where do you keep publicly executable scripts?'
-. ./getfile
-if $test "X$ansexp" != "X$scriptdirexp"; then
- installscript=''
-fi
-scriptdir="$ans"
-scriptdirexp="$ansexp"
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-scripts reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
+$rm -f intsize intsize.*
-EOM
- case "$installscript" in
- '') dflt=`echo $scriptdirexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installscript";;
- esac
- fn=de~
- rp='Where will public scripts be installed?'
- . ./getfile
- installscript="$ans"
+: check for long long
+echo " "
+$echo $n "Checking to see if your system supports long long...$c" >&4
+echo 'long long foo() { long long x; x = 7; return x; }' > try.c
+if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define"
+ echo " Yup, it does." >&4
else
- installscript="$scriptdirexp"
+ val="$undef"
+ echo " Nope, it doesn't." >&4
fi
+$rm try.*
+set d_longlong
+eval $setvar
-: determine where site specific libraries go.
-: Usual default is /usr/local/lib/perl5/site_perl/$apiversion
-prog=`echo $package | $sed 's/-*[0-9.]*$//'`
-case "$prefix" in
-*perl*) set dflt sitelib lib/site_$prog/$apiversion ;;
-*) set dflt sitelib lib/$package/site_$prog/$apiversion ;;
-esac
-eval $prefixit
-$cat <<EOM
+: check for length of long long
+case "${d_longlong}${longlongsize}" in
+$define)
+ echo " "
+ $echo $n "Checking to see how big your long longs are...$c" >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", sizeof(long long));
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ longlongsize=`./try`
+ $echo " $longlongsize bytes." >&4
+ else
+ dflt='8'
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of a long long (in bytes)?"
+ . ./myread
+ longlongsize="$ans"
+ fi
+ if $test "X$longsize" = "X$longlongsize"; then
+ echo "(That isn't any different from an ordinary long.)"
+ fi
+ ;;
+esac
+$rm -f try.c try
-The installation process will also create a directory for
-site-specific extensions and modules. Some users find it convenient
-to place all site-specific files in this directory rather than in the
-main distribution directory.
+echo " "
-EOM
-fn=d~+
-rp='Pathname for the site-specific library files?'
-. ./getfile
-if $test "X$sitelibexp" != "X$ansexp"; then
- installsitelib=''
-fi
-sitelib="$ans"
-sitelibexp="$ansexp"
-if $afs; then
- $cat <<EOM
+if $test X"$intsize" = X8 -o X"$longsize" = X8 -o X"$d_int64t" = X"$define" -o X"$d_longlong" = X"$define"; then
-Since you are running AFS, I need to distinguish the directory in
-which site-specific files reside from the directory in which they are
-installed (and from which they are presumably copied to the former
-directory by occult means).
+echo "Checking how to print 64-bit integers..." >&4
-EOM
- case "$installsitelib" in
- '') dflt=`echo $sitelibexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installsitelib";;
- esac
- fn=de~
- rp='Where will site-specific files be installed?'
- . ./getfile
- installsitelib="$ans"
-else
- installsitelib="$sitelibexp"
+if $test X"$sPRId64" = X -a X"$intsize" = X8; then
+ quad=int
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ int q = 12345678901;
+ printf("%ld\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64='"d"'; sPRIi64='"i"'; sPRIu64='"u"';
+ sPRIo64='"o"'; sPRIx64='"x"'; sPRIX64='"X"';
+ echo "We will use %d."
+ ;;
+ esac
+ fi
fi
-: determine where site specific architecture-dependent libraries go.
-: sitelib default is /usr/local/lib/perl5/site_perl/$apiversion
-: sitearch default is /usr/local/lib/perl5/site_perl/$apiversion/$archname
-: sitelib may have an optional trailing /share.
-tdflt=`echo $sitelib | $sed 's,/share$,,'`
-tdflt="$tdflt/$archname"
-set sitearch sitearch none
-eval $prefixit
-case "$sitearch" in
-'') dflt="$tdflt" ;;
-*) dflt="$sitearch" ;;
-esac
-$cat <<EOM
+if $test X"$sPRId64" = X -a X"$longsize" = X8; then
+ quad=long
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long q = 12345678901;
+ printf("%ld\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64='"ld"'; sPRIi64='"li"'; sPRIu64='"lu"';
+ sPRIo64='"lo"'; sPRIx64='"lx"'; sPRIX64='"lX"';
+ echo "We will use %ld."
+ ;;
+ esac
+ fi
+fi
-The installation process will also create a directory for
-architecture-dependent site-specific extensions and modules.
+if $test X"$sPRId64" = X -a X"$i_inttypes.h" = X"$define" -a X"$d_int64t" = X"$define"; then
+ quad=int64_t
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <inttypes.h>
+#include <stdio.h>
+int main() {
+ int64_t q = 12345678901;
+ printf("%" PRId64 "\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64=PRId64; sPRIi64=PRIi64; sPRIu64=PRIu64;
+ sPRIo64=PRIo64; sPRIx64=PRIx64; sPRIX64=PRIX64;
+ echo "We will use the C9X style."
+ ;;
+ esac
+ fi
+fi
-EOM
-fn=nd~+
-rp='Pathname for the site-specific architecture-dependent library files?'
-. ./getfile
-if $test "X$sitearchexp" != "X$ansexp"; then
- installsitearch=''
+if $test X"$sPRId64" = X -a X"$d_longlong" = X"$define" -a X"$longlongsize" = X8; then
+ quad="long long"
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long long q = 12345678901LL; /* AIX cc requires the LL prefix. */
+ printf("%lld\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64='"lld"'; sPRIi64='"lli"'; sPRIu64='"llu"';
+ sPRIo64='"llo"'; sPRIx64='"llx"'; sPRIX64='"llX"';
+ echo "We will use the %lld style."
+ ;;
+ esac
+ fi
fi
-sitearch="$ans"
-sitearchexp="$ansexp"
-if $afs; then
- $cat <<EOM
-Since you are running AFS, I need to distinguish the directory in
-which site-specific architecture-dependent library files reside from
-the directory in which they are installed (and from which they are
-presumably copied to the former directory by occult means).
+if $test X"$sPRId64" = X -a X"$quad" != X; then
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ $quad q = 12345678901;
+ printf("%Ld\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64='"Ld"'; sPRIi64='"Li"'; sPRIu64='"Lu"';
+ sPRIo64='"Lo"'; sPRIx64='"Lx"'; sPRIX64='"LX"';
+ echo "We will use %lld."
+ ;;
+ esac
+ fi
+fi
-EOM
- case "$installsitearch" in
- '') dflt=`echo $sitearchexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installsitearch";;
- esac
- fn=de~
- rp='Where will site-specific architecture-dependent files be installed?'
- . ./getfile
- installsitearch="$ans"
-else
- installsitearch="$sitearchexp"
+if $test X"$sPRId64" = X -a X"$quad" != X; then
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ $quad q = 12345678901;
+ printf("%qd\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64='"qd"'; sPRIi64='"qi"'; sPRIu64='"qu"';
+ sPRIo64='"qo"'; sPRIx64='"qx"'; sPRIX64='"qX"';
+ echo "We will use %qd."
+ ;;
+ esac
+ fi
fi
-cat <<EOM
+if $test X"$sPRId64" = X; then
+ echo "Cannot figure out how to print 64-bit integers." >&4
+fi
-Previous version of $package used the standard IO mechanisms as defined
-in <stdio.h>. Versions 5.003_02 and later of perl allow alternate IO
-mechanisms via a "PerlIO" abstraction, but the stdio mechanism is still
-the default. This abstraction layer can use AT&T's sfio (if you already
-have sfio installed) or regular stdio. Using PerlIO with sfio may cause
-problems with some extension modules. Using PerlIO with stdio is safe,
-but it is slower than plain stdio and therefore is not the default.
+$rm -f try try.*
-If this doesn't make any sense to you, just accept the default 'n'.
-EOM
-case "$useperlio" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
+fi # intsize -o longsize -o d_int64t -o d_longlong
+
+case "$sPRId64" in
+'') d_PRId64="$undef"; d_PRIi64="$undef"; d_PRIu64="$undef";
+ d_PRIo64="$undef"; d_PRIx64="$undef"; d_PRIX64="$undef";
+ ;;
+*) d_PRId64="$define"; d_PRIi64="$define"; d_PRIu64="$define";
+ d_PRIo64="$define"; d_PRIx64="$define"; d_PRIX64="$define";
+ ;;
esac
-rp='Use the experimental PerlIO abstraction layer?'
-. ./myread
-case "$ans" in
-y|Y)
+
+: check for length of double
+echo " "
+case "$doublesize" in
+'')
+ $echo $n "Checking to see how big your double precision numbers are...$c" >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", sizeof(double));
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ doublesize=`./try`
+ $echo " $doublesize bytes." >&4
+ else
+ dflt='8'
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of a double precision number (in bytes)?"
+ . ./myread
+ doublesize="$ans"
+ fi
+ ;;
+esac
+$rm -f try.c try
+
+: check for long doubles
+echo " "
+$echo $n "Checking to see if your system supports long double...$c" >&4
+echo 'long double foo() { long double x; x = 7.0; return x; }' > try.c
+if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
val="$define"
- ;;
-*)
- echo "Ok, doing things the stdio way"
+ echo " Yup, it does." >&4
+else
val="$undef"
+ echo " Nope, it doesn't." >&4
+fi
+$rm try.*
+set d_longdbl
+eval $setvar
+
+: check for length of long double
+case "${d_longdbl}${longdblsize}" in
+$define)
+ echo " "
+ $echo $n "Checking to see how big your long doubles are...$c" >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", sizeof(long double));
+}
+EOCP
+ set try
+ if eval $compile; then
+ longdblsize=`./try`
+ $echo " $longdblsize bytes." >&4
+ else
+ dflt='8'
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)" >&4
+ rp="What is the size of a long double (in bytes)?"
+ . ./myread
+ longdblsize="$ans"
+ fi
+ if $test "X$doublesize" = "X$longdblsize"; then
+ echo "(That isn't any different from an ordinary double.)"
+ fi
;;
esac
-set useperlio
-eval $setvar
+$rm -f try.c try
-: Check how to convert floats to strings.
-if test "X$d_Gconvert" = X; then
- echo " "
- echo "Checking for an efficient way to convert floats to strings."
- $cat >try.c <<'EOP'
-#ifdef TRY_gconvert
-#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
-char *myname = "gconvert";
-#endif
-#ifdef TRY_gcvt
-#define Gconvert(x,n,t,b) gcvt((x),(n),(b))
-char *myname = "gcvt";
-#endif
-#ifdef TRY_sprintf
-#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
-char *myname = "sprintf";
-#endif
+echo " "
+
+if $test X"$d_longdbl" = X"$define"; then
+
+echo "Checking how to print long doubles..." >&4
+
+if $test X"$sPRIfldbl" = X -a X"$doublesize" = X"$longdblsize"; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ double d = 123.456;
+ printf("%.3f\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"f"'; sPRIgldbl='"g"'; sPRIeldbl='"e"';
+ sPRIFldbl='"F"'; sPRIGldbl='"G"'; sPRIEldbl='"E"';
+ echo "We will use %f."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRIfldbl" = X; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long double d = 123.456;
+ printf("%.3llf\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"llf"'; sPRIgldbl='"llg"'; sPRIeldbl='"lle"';
+ sPRIFldbl='"llF"'; sPRIGldbl='"llG"'; sPRIEldbl='"llE"';
+ echo "We will use %llf."
+ ;;
+ esac
+ fi
+fi
+if $test X"$sPRIfldbl" = X; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
#include <stdio.h>
-
-int
-checkit(expect, got)
-char *expect;
-char *got;
-{
- if (strcmp(expect, got)) {
- printf("%s oddity: Expected %s, got %s\n",
- myname, expect, got);
- exit(1);
- }
+int main() {
+ long double d = 123.456;
+ printf("%.3Lf\n", d);
}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"Lf"'; sPRIgldbl='"Lg"'; sPRIeldbl='"Le"';
+ sPRIFldbl='"LF"'; sPRIGldbl='"LG"'; sPRIEldbl='"LE"';
+ echo "We will use %Lf."
+ ;;
+ esac
+ fi
+fi
-int main()
-{
- char buf[64];
- buf[63] = '\0';
-
- /* This must be 1st test on (which?) platform */
- /* Alan Burlison <AlanBurlsin@unn.unisys.com> */
- Gconvert(0.1, 8, 0, buf);
- checkit("0.1", buf);
-
- Gconvert(1.0, 8, 0, buf);
- checkit("1", buf);
-
- Gconvert(0.0, 8, 0, buf);
- checkit("0", buf);
+if $test X"$sPRIfldbl" = X; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long double d = 123.456;
+ printf("%.3lf\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"lf"'; sPRIgldbl='"lg"'; sPRIeldbl='"le"';
+ sPRIFldbl='"lF"'; sPRIGldbl='"lG"'; sPRIEldbl='"lE"';
+ echo "We will use %lf."
+ ;;
+ esac
+ fi
+fi
- Gconvert(-1.0, 8, 0, buf);
- checkit("-1", buf);
+if $test X"$sPRIfldbl" = X; then
+ echo "Cannot figure out how to print long doubles." >&4
+fi
- /* Some Linux gcvt's give 1.e+5 here. */
- Gconvert(100000.0, 8, 0, buf);
- checkit("100000", buf);
-
- /* Some Linux gcvt's give -1.e+5 here. */
- Gconvert(-100000.0, 8, 0, buf);
- checkit("-100000", buf);
+$rm -f try try.*
- exit(0);
-}
-EOP
- case "$d_Gconvert" in
- gconvert*) xxx_list='gconvert gcvt sprintf' ;;
- gcvt*) xxx_list='gcvt gconvert sprintf' ;;
- sprintf*) xxx_list='sprintf gconvert gcvt' ;;
- *) xxx_list='gconvert gcvt sprintf' ;;
- esac
+fi # d_longdbl
- for xxx_convert in $xxx_list; do
- echo "Trying $xxx_convert"
- $rm -f try try$_o
- set try -DTRY_$xxx_convert
- if eval $compile; then
- echo "$xxx_convert" found. >&4
- if ./try; then
- echo "I'll use $xxx_convert to convert floats into a string." >&4
- break;
- else
- echo "...But $xxx_convert didn't work as I expected."
- fi
- else
- echo "$xxx_convert NOT found." >&4
- fi
- done
-
- case "$xxx_convert" in
- gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
- gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
- *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
- esac
-fi
+case "$sPRIfldbl" in
+'') d_PRIfldbl="$undef"; d_PRIgldbl="$undef"; d_PRIeldbl="$undef";
+ d_PRIFldbl="$undef"; d_PRIGldbl="$undef"; d_PRIEldbl="$undef";
+ ;;
+*) d_PRIfldbl="$define"; d_PRIgldbl="$define"; d_PRIeldbl="$define";
+ d_PRIFldbl="$define"; d_PRIGldbl="$define"; d_PRIEldbl="$define";
+ ;;
+esac
: Initialize h_fcntl
h_fcntl=false
set alarm d_alarm
eval $inlibc
+: see if atolf exists
+set atolf d_atolf
+eval $inlibc
+
+: see if atoll exists
+set atoll d_atoll
+eval $inlibc
+
: Look for GNU-cc style attribute checking
echo " "
echo "Checking whether your compiler can handle __attribute__ ..." >&4
set bzero d_bzero
eval $inlibc
-: check for lengths of integral types
-echo " "
-case "$intsize" in
-'')
- echo "Checking to see how big your integers are..." >&4
- $cat >intsize.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("intsize=%d;\n", sizeof(int));
- printf("longsize=%d;\n", sizeof(long));
- printf("shortsize=%d;\n", sizeof(short));
- exit(0);
-}
-EOCP
- set intsize
- if eval $compile_ok && ./intsize > /dev/null; then
- eval `./intsize`
- echo "Your integers are $intsize bytes long."
- echo "Your long integers are $longsize bytes long."
- echo "Your short integers are $shortsize bytes long."
- else
- $cat >&4 <<EOM
-!
-Help! I can't compile and run the intsize test program: please enlighten me!
-(This is probably a misconfiguration in your system or libraries, and
-you really ought to fix it. Still, I'll try anyway.)
-!
-EOM
- dflt=4
- rp="What is the size of an integer (in bytes)?"
- . ./myread
- intsize="$ans"
- dflt=$intsize
- rp="What is the size of a long integer (in bytes)?"
- . ./myread
- longsize="$ans"
- dflt=2
- rp="What is the size of a short integer (in bytes)?"
- . ./myread
- shortsize="$ans"
- fi
- ;;
-esac
-$rm -f intsize intsize.*
-
: see if signal is declared as pointer to function returning int or void
echo " "
xxx=`./findhdr signal.h`
./try
castflags=$?
else
- echo "(I can't seem to compile the test program--assuming it can't)"
- castflags=7
-fi
-case "$castflags" in
-0) val="$define"
- echo "Yup, it can."
- ;;
-*) val="$undef"
- echo "Nope, it can't."
- ;;
-esac
-set d_castneg
-eval $setvar
-$rm -f try.*
-
-: see if vprintf exists
-echo " "
-if set vprintf val -f d_vprintf; eval $csym; $val; then
- echo 'vprintf() found.' >&4
- val="$define"
- $cat >vprintf.c <<'EOF'
-#include <varargs.h>
-
-int main() { xxx("foo"); }
-
-xxx(va_alist)
-va_dcl
-{
- va_list args;
- char buf[10];
-
- va_start(args);
- exit((unsigned long)vsprintf(buf,"%s",args) > 10L);
-}
-EOF
- set vprintf
- if eval $compile && ./vprintf; then
- echo "Your vsprintf() returns (int)." >&4
- val2="$undef"
- else
- echo "Your vsprintf() returns (char*)." >&4
- val2="$define"
- fi
-else
- echo 'vprintf() NOT found.' >&4
- val="$undef"
- val2="$undef"
-fi
-set d_vprintf
-eval $setvar
-val=$val2
-set d_charvspr
-eval $setvar
-
-: see if chown exists
-set chown d_chown
-eval $inlibc
-
-: see if chroot exists
-set chroot d_chroot
-eval $inlibc
-
-: see if chsize exists
-set chsize d_chsize
-eval $inlibc
-
-hasfield='varname=$1; struct=$2; field=$3; shift; shift; shift;
-while $test $# -ge 2; do
- case "$1" in
- $define) echo "#include <$2>";;
- esac ;
- shift 2;
-done > try.c;
-echo "int main () { struct $struct foo; foo.$field = 0; }" >> try.c;
-if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define";
-else
- val="$undef";
-fi;
-set $varname;
-eval $setvar;
-$rm -f try.c try.o'
-
-: see if this is a sys/uio.h system
-set sys/uio.h i_sysuio
-eval $inhdr
-
-echo "Checking to see if your system supports struct iovec..." >&4
-set d_iovec_s iovec iov_base $i_sysuio sys/uio.h
-eval $hasfield
-case "$d_iovec_s" in
-"$define") echo "Yup, it does." >&4
- ;;
-*) echo "Nope, it doesn't." >&4
- ;;
-esac
-
-socketlib=''
-sockethdr=''
-: see whether socket exists
-echo " "
-$echo $n "Hmm... $c" >&4
-if set socket val -f d_socket; eval $csym; $val; then
- echo "Looks like you have Berkeley networking support." >&4
- d_socket="$define"
- if set setsockopt val -f; eval $csym; $val; then
- d_oldsock="$undef"
- else
- echo "...but it uses the old BSD 4.1c interface, rather than 4.2." >&4
- d_oldsock="$define"
- fi
-else
- if $contains socklib libc.list >/dev/null 2>&1; then
- echo "Looks like you have Berkeley networking support." >&4
- d_socket="$define"
- : we will have to assume that it supports the 4.2 BSD interface
- d_oldsock="$undef"
- else
- echo "You don't have Berkeley networking in libc$_a..." >&4
- if test "X$d_socket" = "X$define"; then
- echo "...but you seem to believe that you have sockets." >&4
- else
- for net in net socket
- do
- if test -f /usr/lib/lib$net$_a; then
- ( ($nm $nm_opt /usr/lib/lib$net$_a | eval $nm_extract) || \
- $ar t /usr/lib/lib$net$_a) 2>/dev/null >> libc.list
- if $contains socket libc.list >/dev/null 2>&1; then
- d_socket="$define"
- socketlib="-l$net"
- case "$net" in
- net)
- echo "...but the Wollongong group seems to have hacked it in." >&4
- sockethdr="-I/usr/netinclude"
- ;;
- esac
- echo "Found Berkeley sockets interface in lib$net." >& 4
- if $contains setsockopt libc.list >/dev/null 2>&1; then
- d_oldsock="$undef"
- else
- echo "...using the old BSD 4.1c interface, rather than 4.2." >&4
- d_oldsock="$define"
- fi
- break
- fi
- fi
- done
- if test "X$d_socket" != "X$define"; then
- echo "or anywhere else I see." >&4
- d_socket="$undef"
- d_oldsock="$undef"
- fi
- fi
- fi
+ echo "(I can't seem to compile the test program--assuming it can't)"
+ castflags=7
fi
+case "$castflags" in
+0) val="$define"
+ echo "Yup, it can."
+ ;;
+*) val="$undef"
+ echo "Nope, it can't."
+ ;;
+esac
+set d_castneg
+eval $setvar
+$rm -f try.*
-: see if socketpair exists
-set socketpair d_sockpair
-eval $inlibc
+: see if vprintf exists
+echo " "
+if set vprintf val -f d_vprintf; eval $csym; $val; then
+ echo 'vprintf() found.' >&4
+ val="$define"
+ $cat >vprintf.c <<'EOF'
+#include <varargs.h>
+int main() { xxx("foo"); }
-echo " "
-echo "Checking the availability of certain socket constants..." >& 4
-for ENUM in MSG_CTRUNC MSG_DONTROUTE MSG_OOB MSG_PEEK MSG_PROXY SCM_RIGHTS; do
- enum=`$echo $ENUM|./tr '[A-Z]' '[a-z]'`
- $cat >try.c <<EOF
-#include <sys/types.h>
-#include <sys/socket.h>
-int main() {
- int i = $ENUM;
+xxx(va_alist)
+va_dcl
+{
+ va_list args;
+ char buf[10];
+
+ va_start(args);
+ exit((unsigned long)vsprintf(buf,"%s",args) > 10L);
}
EOF
- val="$undef"
- set try; if eval $compile; then
- val="$define"
+ set vprintf
+ if eval $compile && ./vprintf; then
+ echo "Your vsprintf() returns (int)." >&4
+ val2="$undef"
+ else
+ echo "Your vsprintf() returns (char*)." >&4
+ val2="$define"
fi
- set d_${enum}; eval $setvar
- $rm -f try.c try
-done
+else
+ echo 'vprintf() NOT found.' >&4
+ val="$undef"
+ val2="$undef"
+fi
+set d_vprintf
+eval $setvar
+val=$val2
+set d_charvspr
+eval $setvar
-set sendmsg d_sendmsg
+: see if chown exists
+set chown d_chown
eval $inlibc
-set recvmsg d_recvmsg
+: see if chroot exists
+set chroot d_chroot
eval $inlibc
-echo " "
-$echo $n "Checking to see if your system supports struct msghdr...$c" >&4
-set d_msghdr_s msghdr msg_name define sys/types.h $d_socket sys/socket.h $i_sysuio sys/uio.h
-eval $hasfield
-case "$d_msghdr_s" in
-"$define") echo "Yup, it does." >&4
- ;;
-*) echo "Nope, it doesn't." >&4
- ;;
-esac
-
-$echo $n "Checking to see if your system supports struct cmsghdr...$c" >&4
-set d_cmsghdr_s cmsghdr cmsg_len define sys/types.h $d_socket sys/socket.h $i_sysuio sys/uio.h
-eval $hasfield
-case "$d_cmsghdr_s" in
-"$define") echo "Yup, it does." >&4
- ;;
-*) echo "Nope, it doesn't." >&4
- ;;
-esac
+: see if chsize exists
+set chsize d_chsize
+eval $inlibc
: check for const keyword
echo " "
set d_dbl_dig
eval $setvar
-
-if $test X"$use64bits" = X"$define"; then
- : see if dbminit64 exists
- set dbminit64 d_dbminit64
- eval $inlibc
-
- : see if dbmclose64 exists
- set dbmclose64 d_dbmclose64
- eval $inlibc
-
- : see if fetch64 exists
- set fetch64 d_fetch64
- eval $inlibc
-
- : see if store64 exists
- set store64 d_store64
- eval $inlibc
-
- : see if delete64 exists
- set delete64 d_delete64
- eval $inlibc
-
- : see if firstkey64 exists
- set firstkey64 d_firstkey64
- eval $inlibc
-
- : see if nextkey64 exists
- set nextkey64 d_nextkey64
- eval $inlibc
-else
- val="$undef"
- for xxx in d_dbminit64 d_dbmclose64 d_fetch64 d_store64 d_delete64 d_firstkey64 d_nextkey64
- do
- set $xxx
- eval $setvar
- done
-fi
-
: see if difftime exists
set difftime d_difftime
eval $inlibc
-: see if sys/stat.h is available
-set sys/stat.h i_sysstat
-eval $inhdr
-
: see if this is a dirent system
echo " "
if xinc=`./findhdr dirent.h`; $test "$xinc"; then
$rm -f try.c
-: see if the directory entry stores field length
-echo " "
-$cppstdin $cppflags $cppminus < "$xinc" > try.c
-if $contains 'd_namlen' try.c >/dev/null 2>&1; then
- echo "Good, your directory entry keeps length information in d_namlen." >&4
- val="$define"
-else
- echo "Your directory entry does not know about the d_namlen field." >&4
- val="$undef"
-fi
-set d_dirnamlen
-eval $setvar
-$rm -f try.c
-
-
-if $test X"$use64bits" = X"$define"; then
- : see if fstat64 exists
- set fstat64 d_fstat64
- eval $inlibc
-
- : see if ftruncate64 exists
- set ftruncate64 d_ftruncate64
- eval $inlibc
-
- : see if lockf64 exists
- set lockf64 d_lockf64
- eval $inlibc
-
- : see if llseek exists
- set llseek d_llseek
- eval $inlibc
-
- : see if lseek64 exists
- set lseek64 d_lseek64
- eval $inlibc
-
- : see if lstat64 exists
- set lstat64 d_lstat64
- eval $inlibc
-
- : see if open64 exists
- set open64 d_open64
- eval $inlibc
-
- : see if opendir64 exists
- set opendir64 d_opendir64
- eval $inlibc
-
- : see if readdir64 exists
- set readdir64 d_readdir64
- eval $inlibc
-
- : see if seekdir64 exists
- set seekdir64 d_seekdir64
- eval $inlibc
-
- : see if stat64 exists
- set stat64 d_stat64
- eval $inlibc
-
- : see if telldir64 exists
- set telldir64 d_telldir64
- eval $inlibc
-
- : see if truncate64 exists
- set truncate64 d_truncate64
- eval $inlibc
-
- : check for off64_t
- echo " "
- echo $n "Checking to see if your system supports off64_t...$c" >&4
- $cat >try.c <<EOCP
-#include <sys/types.h>
-#include <unistd.h>
-off64_t foo() { off64_t x; x = 7; return x; }'
-EOCP
- if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define"
- echo " Yup, it does." >&4
- else
- val="$undef"
- echo " Nope, it doesn't." >&4
- fi
- $rm -f try.*
- set d_off64_t
- eval $setvar
-
- : check for offset_t
- echo " "
- echo $n "Checking to see if your system supports offset_t...$c" >&4
- $cat >try.c <<EOCP
-#include <sys/types.h>
-#include <unistd.h>
-offset_t foo() { offset_t x; x = 7; return x; }'
-EOCP
- if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define"
- echo " Yup, it does." >&4
- else
- val="$undef"
- echo " Nope, it doesn't." >&4
- fi
- $rm -f try.*
- set d_offset_t
- eval $setvar
-
- : check for ino64_t
- echo " "
- echo $n "Checking to see if your system supports ino64_t...$c" >&4
- val="$undef"
- case "$i_sysstat" in
- "$define" )
- $cat >try.c <<EOCP
-#include <sys/types.h>
-#include <sys/stat.h>
-ino64_t foo() { ino64_t x; x = 7; return x; }'
-EOCP
- if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define"
- fi
- $rm -f try.*
- ;;
- esac
- if $test "X$val" = X"$define"; then
- echo " Yup, it does." >&4
- else
- echo " Nope, it doesn't." >&4
- fi
- set d_ino64_t
- eval $setvar
-
- : check for struct flock64
- echo " "
- echo "Checking to see if your system supports struct flock64..." >&4
- if $h_fcntl; then
- set d_flock64_s flock64 l_len define fcntl.h
- eval $hasfield
- else
- val="$undef"
- set d_flock64_s
- eval $setvar
- fi
- case "$d_flock64_s" in
- "$define") echo "Yup, it does." >&4
- ;;
- *) echo "Nope, it doesn't." >&4
- ;;
- esac
-
- : check for struct dirent64
- echo " "
- echo "Checking to see if your system supports struct dirent64..." >&4
- set d_dirent64_s dirent64 d_off $i_dirent dirent.h
- eval $hasfield
- case "$d_dirent64_s" in
- "$define") echo "Yup, it does." >&4
- ;;
- *) echo "Nope, it doesn't." >&4
- ;;
- esac
-
+: see if the directory entry stores field length
+echo " "
+$cppstdin $cppflags $cppminus < "$xinc" > try.c
+if $contains 'd_namlen' try.c >/dev/null 2>&1; then
+ echo "Good, your directory entry keeps length information in d_namlen." >&4
+ val="$define"
else
+ echo "Your directory entry does not know about the d_namlen field." >&4
val="$undef"
- for xxx in d_fstat64 d_ftruncate64 d_lockf64 d_lseek64 d_lstat64 d_open64 d_opendir64 d_readdir64 d_seekdir64 d_stat64 d_telldir64 d_truncate64 d_off64_t d_offset_t d_ino64_t d_flock64_s d_dirent64_s
- do
- set $xxx
- eval $setvar
- done
fi
+set d_dirnamlen
+eval $setvar
+$rm -f try.c
: see if dlerror exists
xxx_runnm="$runnm"
esac
else
echo "I can't compile and run the test program." >&4
+ echo "I'm guessing that dlsym doesn't need a leading underscore." >&4
fi
;;
esac
set fcntl d_fcntl
eval $inlibc
+hasfield='varname=$1; struct=$2; field=$3; shift; shift; shift;
+while $test $# -ge 2; do
+ case "$1" in
+ $define) echo "#include <$2>";;
+ esac ;
+ shift 2;
+done > try.c;
+echo "int main () { struct $struct foo; char* bar; bar = (char*)foo.$field; }" >> try.c;
+set try;
+if eval $compile; then
+ val="$define";
+else
+ val="$undef";
+fi;
+set $varname;
+eval $setvar;
+$rm -f try.c try.o'
+
+socketlib=''
+sockethdr=''
+: see whether socket exists
+echo " "
+$echo $n "Hmm... $c" >&4
+if set socket val -f d_socket; eval $csym; $val; then
+ echo "Looks like you have Berkeley networking support." >&4
+ d_socket="$define"
+ if set setsockopt val -f; eval $csym; $val; then
+ d_oldsock="$undef"
+ else
+ echo "...but it uses the old BSD 4.1c interface, rather than 4.2." >&4
+ d_oldsock="$define"
+ fi
+else
+ if $contains socklib libc.list >/dev/null 2>&1; then
+ echo "Looks like you have Berkeley networking support." >&4
+ d_socket="$define"
+ : we will have to assume that it supports the 4.2 BSD interface
+ d_oldsock="$undef"
+ else
+ echo "You don't have Berkeley networking in libc$_a..." >&4
+ if test "X$d_socket" = "X$define"; then
+ echo "...but you seem to believe that you have sockets." >&4
+ else
+ for net in net socket
+ do
+ if test -f /usr/lib/lib$net$_a; then
+ ( ($nm $nm_opt /usr/lib/lib$net$_a | eval $nm_extract) || \
+ $ar t /usr/lib/lib$net$_a) 2>/dev/null >> libc.list
+ if $contains socket libc.list >/dev/null 2>&1; then
+ d_socket="$define"
+ socketlib="-l$net"
+ case "$net" in
+ net)
+ echo "...but the Wollongong group seems to have hacked it in." >&4
+ sockethdr="-I/usr/netinclude"
+ ;;
+ esac
+ echo "Found Berkeley sockets interface in lib$net." >& 4
+ if $contains setsockopt libc.list >/dev/null 2>&1; then
+ d_oldsock="$undef"
+ else
+ echo "...using the old BSD 4.1c interface, rather than 4.2." >&4
+ d_oldsock="$define"
+ fi
+ break
+ fi
+ fi
+ done
+ if test "X$d_socket" != "X$define"; then
+ echo "or anywhere else I see." >&4
+ d_socket="$undef"
+ d_oldsock="$undef"
+ fi
+ fi
+ fi
+fi
+
+: see if socketpair exists
+set socketpair d_sockpair
+eval $inlibc
+
+
+echo " "
+echo "Checking the availability of certain socket constants..." >& 4
+for ENUM in MSG_CTRUNC MSG_DONTROUTE MSG_OOB MSG_PEEK MSG_PROXY SCM_RIGHTS; do
+ enum=`$echo $ENUM|./tr '[A-Z]' '[a-z]'`
+ $cat >try.c <<EOF
+#include <sys/types.h>
+#include <sys/socket.h>
+int main() {
+ int i = $ENUM;
+}
+EOF
+ val="$undef"
+ set try; if eval $compile; then
+ val="$define"
+ fi
+ set d_${enum}; eval $setvar
+ $rm -f try.c try
+done
+
: see if sys/select.h has to be included
set sys/select.h i_sysselct
eval $inhdr
set fgetpos d_fgetpos
eval $inlibc
-
-if $test X"$use64bits" = X"$define"; then
- : see if fgetpos64 exists
- set fgetpos64 d_fgetpos64
- eval $inlibc
-
- : see if fopen64 exists
- set freopen64 d_fopen64
- eval $inlibc
-
- : see if freopen64 exists
- set freopen64 d_freopen64
- eval $inlibc
-
- : see if fseek64 exists
- set fseek64 d_fseek64
- eval $inlibc
-
- : see if fseeko64 exists
- set fseeko64 d_fseeko64
- eval $inlibc
-
- : see if fsetpos64 exists
- set fsetpos64 d_fsetpos64
- eval $inlibc
-
- : see if ftell64 exists
- set ftell64 d_ftell64
- eval $inlibc
-
- : see if ftello64 exists
- set ftello64 d_ftello64
- eval $inlibc
-
- : see if tmpfile64 exists
- set tmpfile64 d_tmpfile64
- eval $inlibc
-else
- val="$undef"
- for xxx in d_fgetpos64 d_fopen64 d_freopen64 d_fseek64 d_fseeko64 d_fsetpos64 d_ftell64 d_ftello64 d_tmpfile64
- do
- set $xxx
- eval $setvar
- done
-fi
-
: see if flock exists
set flock d_flock
eval $inlibc
set fpathconf d_fpathconf
eval $inlibc
-: see if fseeko exists
-set fseeko d_fseeko
-eval $inlibc
-: see if fsetpos exists
-set fsetpos d_fsetpos
+: see if llseek exists
+set llseek d_llseek
eval $inlibc
+: check for off64_t
+echo " "
+$echo $n "Checking to see if your system supports off64_t...$c" >&4
+$cat >try.c <<EOCP
+#include <sys/types.h>
+#include <unistd.h>
+off64_t foo() { off64_t x; x = 7; return x; }'
+EOCP
+if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define"
+ echo " Yup, it does." >&4
+else
+ val="$undef"
+ echo " Nope, it doesn't." >&4
+fi
+$rm -f try.*
+set d_off64_t
+eval $setvar
+
+: check for fpos64_t
+echo " "
+$echo $n "Checking to see if your system supports fpos64_t...$c" >&4
+$cat >try.c <<EOCP
+#include <sys/stdio.h>
+fpos64_t foo() { fpos64_t x; x = 7; return x; }'
+EOCP
+if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define"
+ echo " Yup, it does." >&4
+else
+ val="$undef"
+ echo " Nope, it doesn't." >&4
+fi
+$rm -f try.*
+set d_fpos64_t
+eval $setvar
+
+hasstruct='varname=$1; struct=$2; shift; shift;
+while $test $# -ge 2; do
+ case "$1" in
+ $define) echo "#include <$2>";;
+ esac ;
+ shift 2;
+done > try.c;
+echo "int main () { struct $struct foo; }" >> try.c;
+set try;
+if eval $compile; then
+ val="$define";
+else
+ val="$undef";
+fi;
+set $varname;
+eval $setvar;
+$rm -f try.c try.o'
+
: see if this is a sys/param system
set sys/param.h i_sysparam
eval $inhdr
set sys/mount.h i_sysmount
eval $inhdr
+: see if sys/types.h has to be included
+set sys/types.h i_systypes
+eval $inhdr
+
+
+echo " "
+echo "Checking to see if your system supports struct fs_data..." >&4
+set d_fs_data_s fs_data $i_systypes sys/types.h $i_sysparam sys/param.h $i_sysmount sys/mount.h
+eval $hasstruct
+case "$d_fs_data_s" in
+"$define") echo "Yup, it does." >&4 ;;
+*) echo "Nope, it doesn't." >&4 ;;
+esac
+
+: see if fseeko exists
+set fseeko d_fseeko
+eval $inlibc
-: see if statfs exists
-set statfs d_statfs
+: see if fsetpos exists
+set fsetpos d_fsetpos
eval $inlibc
+
: see if fstatfs exists
set fstatfs d_fstatfs
eval $inlibc
-: see if statfs knows about mount flags
-set d_statfsflags statfs f_flags $i_sysparam sys/param.h $i_sysmount sys/mount.h
-eval $hasfield
-
: see if statvfs exists
set statvfs d_statvfs
set getlogin d_getlogin
eval $inlibc
+: see if getmnt exists
+set getmnt d_getmnt
+eval $inlibc
+
: see if getmntent exists
set getmntent d_getmntent
eval $inlibc
if set strchr val -f d_strchr; eval $csym; $val; then
val="$define"
vali="$undef"
- echo "strchr() found." >&4
- else
- echo "No index() or strchr() found!" >&4
- val="$undef"
- vali="$undef"
- fi
-fi
-set d_strchr; eval $setvar
-val="$vali"
-set d_index; eval $setvar
-
-: check whether inet_aton exists
-set inet_aton d_inetaton
-eval $inlibc
-
-: see if inttypes.h is available
-: we want a real compile instead of Inhdr because some systems
-: have an inttypes.h which includes non-existent headers
-echo " "
-$cat >try.c <<EOCP
-#include <inttypes.h>
-int main() {
- static int32_t foo32 = 0x12345678;
-}
-EOCP
-set try
-if eval $compile; then
- echo "<inttypes.h> found." >&4
- val="$define"
-else
- echo "<inttypes.h> NOT found." >&4
- val="$undef"
-fi
-$rm -f try.c try
-set i_inttypes
-eval $setvar
-
-: check for int64_t
-case "$use64bits" in
-"$define" )
- echo " "
- echo $n "Checking to see if your system supports int64_t...$c" >&4
- $cat >try.c <<EOCP
-#include <sys/types.h>
-#$i_inttypes I_INTTYPES
-#ifdef I_INTTYPES
-#include <inttypes.h>
-#endif
-int64_t foo() { int64_t x; x = 7; return x; }
-EOCP
- if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define"
- echo " Yup, it does." >&4
+ echo "strchr() found." >&4
else
+ echo "No index() or strchr() found!" >&4
val="$undef"
- echo " Nope, it doesn't." >&4
+ vali="$undef"
fi
- $rm -f try.*
- ;;
-*) val="$undef"
- ;;
-esac
-set d_int64t
-eval $setvar
+fi
+set d_strchr; eval $setvar
+val="$vali"
+set d_index; eval $setvar
+: check whether inet_aton exists
+set inet_aton d_inetaton
+eval $inlibc
: Look for isascii
echo " "
set d_lchown
eval $setvar
+: See if number of significant digits in a double precision number is known
+echo " "
+$cat >ldbl_dig.c <<EOM
+#$i_limits I_LIMITS
+#$i_float I_FLOAT
+#ifdef I_LIMITS
+#include <limits.h>
+#endif
+#ifdef I_FLOAT
+#include <float.h>
+#endif
+#ifdef LDBL_DIG
+printf("Contains LDBL_DIG");
+#endif
+EOM
+$cppstdin $cppflags $cppminus < ldbl_dig.c >ldbl_dig.E 2>/dev/null
+if $contains 'LDBL_DIG' ldbl_dig.E >/dev/null 2>&1; then
+ echo "LDBL_DIG found." >&4
+ val="$define"
+else
+ echo "LDBL_DIG NOT found." >&4
+ val="$undef"
+fi
+$rm -f ldbl_dig.?
+set d_ldbl_dig
+eval $setvar
+
: see if link exists
set link d_link
eval $inlibc
set lockf d_lockf
eval $inlibc
-: check for length of double
-echo " "
-case "$doublesize" in
-'')
- $echo $n "Checking to see how big your double precision numbers are...$c" >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", sizeof(double));
-}
-EOCP
- set try
- if eval $compile_ok; then
- doublesize=`./try`
- $echo " $doublesize bytes." >&4
- else
- dflt='8'
- echo "(I can't seem to compile the test program. Guessing...)"
- rp="What is the size of a double precision number (in bytes)?"
- . ./myread
- doublesize="$ans"
- fi
- ;;
-esac
-$rm -f try.c try
-
-: check for long doubles
-echo " "
-echo $n "Checking to see if your system supports long doubles...$c" >&4
-echo 'long double foo() { long double x; x = 7.0; return x; }' > try.c
-if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define"
- echo " Yup, it does." >&4
-else
- val="$undef"
- echo " Nope, it doesn't." >&4
-fi
-$rm try.*
-set d_longdbl
-eval $setvar
-
-: check for length of long double
-case "${d_longdbl}${longdblsize}" in
-$define)
- echo " "
- $echo $n "Checking to see how big your long doubles are...$c" >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", sizeof(long double));
-}
-EOCP
- set try
- if eval $compile; then
- longdblsize=`./try`
- $echo " $longdblsize bytes." >&4
- else
- dflt='8'
- echo " "
- echo "(I can't seem to compile the test program. Guessing...)" >&4
- rp="What is the size of a long double (in bytes)?"
- . ./myread
- longdblsize="$ans"
- fi
- if $test "X$doublesize" = "X$longdblsize"; then
- echo "(That isn't any different from an ordinary double.)"
- fi
- ;;
-esac
-$rm -f try.c try
-
-: check for long long
-echo " "
-echo $n "Checking to see if your system supports long long...$c" >&4
-echo 'long long foo() { long long x; x = 7; return x; }' > try.c
-if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define"
- echo " Yup, it does." >&4
-else
- val="$undef"
- echo " Nope, it doesn't." >&4
-fi
-$rm try.*
-set d_longlong
-eval $setvar
-
-: check for length of long long
-case "${d_longlong}${longlongsize}" in
-$define)
- echo " "
- $echo $n "Checking to see how big your long longs are...$c" >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", sizeof(long long));
-}
-EOCP
- set try
- if eval $compile_ok; then
- longlongsize=`./try`
- $echo " $longlongsize bytes." >&4
- else
- dflt='8'
- echo " "
- echo "(I can't seem to compile the test program. Guessing...)"
- rp="What is the size of a long long (in bytes)?"
- . ./myread
- longlongsize="$ans"
- fi
- if $test "X$longsize" = "X$longlongsize"; then
- echo "(That isn't any different from an ordinary long.)"
- fi
- ;;
-esac
-$rm -f try.c try
-
: see if lstat exists
set lstat d_lstat
eval $inlibc
-: see if madvise exists
-set madvise d_madvise
-eval $inlibc
-
: see if mblen exists
set mblen d_mblen
eval $inlibc
set mktime d_mktime
eval $inlibc
-: see if this is a sys/mman.h system
-set sys/mman.h i_sysmman
-eval $inhdr
-
-: see if mmap exists
-set mmap d_mmap
-eval $inlibc
-: see what shmat returns
-: default to something harmless
-mmaptype='void *'
-case "$i_sysmman$d_mmap" in
-"$define$define")
- $cat >mmap.c <<'END'
-#include <sys/mman.h>
-void *mmap();
-END
- if $cc $ccflags -c mmap.c >/dev/null 2>&1; then
- mmaptype='void *'
- else
- mmaptype='caddr_t'
- fi
- echo "and it returns ($mmaptype)." >&4
- ;;
-esac
-
-
-
-: see if mprotect exists
-set mprotect d_mprotect
-eval $inlibc
-
: see if msgctl exists
set msgctl d_msgctl
eval $inlibc
set d_msg
eval $setvar
-: see if msync exists
-set msync d_msync
-eval $inlibc
-
-: see if munmap exists
-set munmap d_munmap
-eval $inlibc
-
: see if nice exists
set nice d_nice
eval $inlibc
: see if POSIX threads are available
-if test "X$usethreads" = "X$define"; then
- set pthread.h i_pthread
- eval $inhdr
-else
- i_pthread="$undef"
-fi
+set pthread.h i_pthread
+eval $inhdr
+
set readlink d_readlink
eval $inlibc
-: see if readv exists
-set readv d_readv
-eval $inlibc
-
: see if rename exists
set rename d_rename
eval $inlibc
int main()
{
struct sigaction act, oact;
+ act.sa_flags = 0;
+ oact.sa_handler = 0;
}
EOP
set try
eval $setvar
$rm -f try.c try
+: see if sqrtl exists
+set sqrtl d_sqrtl
+eval $inlibc
+
+: see if sys/stat.h is available
+set sys/stat.h i_sysstat
+eval $inhdr
+
+
: see if stat knows about block sizes
echo " "
+echo "Checking to see if your struct stat has st_blocks field..." >&4
set d_statblks stat st_blocks $i_sysstat sys/stat.h
eval $hasfield
+
+: see if this is a sys/vfs.h system
+set sys/vfs.h i_sysvfs
+eval $inhdr
+
+
+: see if this is a sys/statfs.h system
+set sys/statfs.h i_sysstatfs
+eval $inhdr
+
+
+echo " "
+echo "Checking to see if your system supports struct statfs..." >&4
+set d_statfs_s statfs $i_systypes sys/types.h $i_sysparam sys/param.h $i_sysmount sys/mount.h $i_sysvfs sys/vfs.h $i_sysstatfs sys/statfs.h
+eval $hasstruct
+case "$d_statfs_s" in
+"$define") echo "Yup, it does." >&4 ;;
+*) echo "Nope, it doesn't." >&4 ;;
+esac
+
+
+
+: see if struct statfs knows about f_flags
+case "$d_statfs_s" in
+define)
+ echo " "
+ echo "Checking to see if your struct statfs has f_flags field..." >&4
+ set d_statfs_f_flags statfs f_flags $i_systypes sys/types.h $i_sysparam sys/param.h $i_sysmount sys/mount.h $i_sysvfs sys/vfs.h $i_sysstatfs sys/statfs.h
+ eval $hasfield
+ ;;
+*) val="$undef"
+ set d_statfs_f_flags
+ eval $setvar
+ ;;
+esac
+case "$d_statfs_f_flags" in
+"$define") echo "Yup, it does." >&4 ;;
+*) echo "Nope, it doesn't." >&4 ;;
+esac
+
: see if _ptr and _cnt from stdio act std
echo " "
if $contains '_IO_fpos_t' `./findhdr stdio.h` `./findhdr libio.h` >/dev/null 2>&1 ; then
set strtoul d_strtoul
eval $inlibc
+: see if strtoull exists
+set strtoull d_strtoull
+eval $inlibc
+
: see if strxfrm exists
set strxfrm d_strxfrm
eval $inlibc
set tcsetpgrp d_tcsetpgrp
eval $inlibc
-: see if sys/types.h has to be included
-set sys/types.h i_systypes
-eval $inhdr
-
: see if prototype for telldir is available
echo " "
set d_telldirproto telldir $i_systypes sys/types.h $i_dirent dirent.h
set umask d_umask
eval $inlibc
+: see if ustat exists
+set ustat d_ustat
+eval $inlibc
+
: backward compatibility for d_hvfork
if test X$d_hvfork != X; then
d_vfork="$d_hvfork"
set wctomb d_wctomb
eval $inlibc
-: see if writev exists
-set writev d_writev
-eval $inlibc
-
: preserve RCS keywords in files with variable substitution, grrr
Date='$Date'
Id='$Id'
skipping the byteorder check.
EOM
- byteorder=''
+ byteorder='0xffff'
;;
*)
case "$byteorder" in
In the following, larger digits indicate more significance. A big-endian
machine like a Pyramid or a Motorola 680?0 chip will come out to 4321. A
little-endian machine like a Vax or an Intel 80?86 chip would be 1234. Other
-machines may have weird orders like 3412. A Cray will report 87654321. If
-the test program works the default is probably right.
+machines may have weird orders like 3412. A Cray will report 87654321,
+an Alpha will report 12345678. If the test program works the default is
+probably right.
I'm now running the test program...
EOM
$cat >try.c <<'EOCP'
echo "You have EBCDIC." >&4
val="$define"
else
- echo "Nope, no EBCDIC. Assuming ASCII or some ISO Latin." >&4
+ echo "Nope, no EBCDIC, probably ASCII or some ISO Latin." >&4
fi
else
echo "I'm unable to compile the test program." >&4
set pid_t pidtype int stdio.h sys/types.h
eval $typedef_ask
+: Find earliest binary compatible site_perl subdirectory perl can use.
+case "$bincompat5005" in
+"$define") xs_apiversion='5.005' ;;
+*) xs_apiversion=$apiversion ;; # The current site_perl version.
+esac
+: Find earliest pure perl site_perl subdirectory perl can use.
+: The versioned directories started at 5.005.
+pm_apiversion='5.005'
+
: check for length of pointer
echo " "
case "$ptrsize" in
;;
esac
+echo " "
+case "$uidtype" in
+*_t) zzz="$uidtype" ;;
+*) zzz="uid" ;;
+esac
+echo "Checking the sign of $zzz..." >&4
+cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ $uidtype foo = -1;
+ if (foo < 0)
+ printf("-1\n");
+ else
+ printf("1\n");
+}
+EOCP
+set try
+if eval $compile; then
+ yyy=`./try`
+ case "$yyy" in
+ '') uidsign=1
+ echo "(I can't execute the test program--guessing unsigned.)" >&4
+ ;;
+ *) uidsign=$yyy
+ case "$uidsign" in
+ 1) echo "Your $zzz is unsigned." ;;
+ -1) echo "Your $zzz is signed." ;;
+ esac
+ ;;
+ esac
+else
+ uidsign=1
+ echo "(I can't compile the test program--guessing unsigned.)" >&4
+fi
+
+
: see if dbm.h is available
: see if dbmclose exists
set dbmclose d_dbmclose
set sys/statvfs.h i_sysstatvfs
eval $inhdr
+: see if this is a sys/uio.h system
+set sys/uio.h i_sysuio
+eval $inhdr
+
+echo "Checking to see if your system supports struct iovec..." >&4
+set d_iovec_s iovec iov_base $i_sysuio sys/uio.h
+eval $hasfield
+case "$d_iovec_s" in
+"$define") echo "Yup, it does." >&4
+ ;;
+*) echo "Nope, it doesn't." >&4
+ ;;
+esac
+
: see if this is a sys/un.h system
set sys/un.h i_sysun
eval $inhdr
set sys/wait.h i_syswait
eval $inhdr
+: see if this is a ustat.h system
+set ustat.h i_ustat
+eval $inhdr
+
: see if this is an utime system
set utime.h i_utime
eval $inhdr
eval $find_extensions;
cd ..;
shift;
- fi
+ fi;
fi
;;
- esac
+ esac;
done'
tdir=`pwd`
cd $rsrc/ext
-set
+set X
shift
eval $find_extensions
set X $nonxs_extensions
echo " "
echo "Stripping down executable paths..." >&4
for file in $loclist $trylist; do
- if test X$file != Xln -a X$file != Xar -o X$osname != Xos2; then
- eval $file="\$file"
- fi
+ eval temp=\$$file
+ eval $file=`basename $temp`
done
;;
esac
baserev='$baserev'
bash='$bash'
bin='$bin'
+bincompat5005='$bincompat5005'
binexp='$binexp'
bison='$bison'
byacc='$byacc'
cryptlib='$cryptlib'
csh='$csh'
d_Gconvert='$d_Gconvert'
+d_PRIEldbl='$d_PRIEldbl'
+d_PRIFldbl='$d_PRIFldbl'
+d_PRIGldbl='$d_PRIGldbl'
+d_PRIX64='$d_PRIX64'
+d_PRId64='$d_PRId64'
+d_PRIeldbl='$d_PRIeldbl'
+d_PRIfldbl='$d_PRIfldbl'
+d_PRIgldbl='$d_PRIgldbl'
+d_PRIi64='$d_PRIi64'
+d_PRIo64='$d_PRIo64'
+d_PRIu64='$d_PRIu64'
+d_PRIx64='$d_PRIx64'
d_access='$d_access'
d_accessx='$d_accessx'
d_alarm='$d_alarm'
d_archlib='$d_archlib'
+d_atolf='$d_atolf'
+d_atoll='$d_atoll'
d_attribut='$d_attribut'
d_bcmp='$d_bcmp'
d_bcopy='$d_bcopy'
+d_bincompat5005='$d_bincompat5005'
d_bsd='$d_bsd'
d_bsdgetpgrp='$d_bsdgetpgrp'
d_bsdsetpgrp='$d_bsdsetpgrp'
d_chroot='$d_chroot'
d_chsize='$d_chsize'
d_closedir='$d_closedir'
-d_cmsghdr_s='$d_cmsghdr_s'
d_const='$d_const'
d_crypt='$d_crypt'
d_csh='$d_csh'
d_cuserid='$d_cuserid'
d_dbl_dig='$d_dbl_dig'
-d_dbmclose64='$d_dbmclose64'
-d_dbminit64='$d_dbminit64'
-d_delete64='$d_delete64'
d_difftime='$d_difftime'
-d_dirent64_s='$d_dirent64_s'
d_dirnamlen='$d_dirnamlen'
d_dlerror='$d_dlerror'
d_dlopen='$d_dlopen'
d_fd_macros='$d_fd_macros'
d_fd_set='$d_fd_set'
d_fds_bits='$d_fds_bits'
-d_fetch64='$d_fetch64'
-d_fgetpos64='$d_fgetpos64'
d_fgetpos='$d_fgetpos'
-d_firstkey64='$d_firstkey64'
d_flexfnam='$d_flexfnam'
-d_flock64_s='$d_flock64_s'
d_flock='$d_flock'
-d_fopen64='$d_fopen64'
d_fork='$d_fork'
d_fpathconf='$d_fpathconf'
-d_freopen64='$d_freopen64'
-d_fseek64='$d_fseek64'
-d_fseeko64='$d_fseeko64'
+d_fpos64_t='$d_fpos64_t'
+d_fs_data_s='$d_fs_data_s'
d_fseeko='$d_fseeko'
-d_fsetpos64='$d_fsetpos64'
d_fsetpos='$d_fsetpos'
-d_fstat64='$d_fstat64'
d_fstatfs='$d_fstatfs'
d_fstatvfs='$d_fstatvfs'
-d_ftell64='$d_ftell64'
-d_ftello64='$d_ftello64'
d_ftello='$d_ftello'
d_ftime='$d_ftime'
-d_ftruncate64='$d_ftruncate64'
d_getgrent='$d_getgrent'
d_getgrps='$d_getgrps'
d_gethbyaddr='$d_gethbyaddr'
d_gethname='$d_gethname'
d_gethostprotos='$d_gethostprotos'
d_getlogin='$d_getlogin'
+d_getmnt='$d_getmnt'
d_getmntent='$d_getmntent'
d_getnbyaddr='$d_getnbyaddr'
d_getnbyname='$d_getnbyname'
d_htonl='$d_htonl'
d_index='$d_index'
d_inetaton='$d_inetaton'
-d_ino64_t='$d_ino64_t'
d_int64t='$d_int64t'
d_iovec_s='$d_iovec_s'
d_isascii='$d_isascii'
d_killpg='$d_killpg'
d_lchown='$d_lchown'
+d_ldbl_dig='$d_ldbl_dig'
d_link='$d_link'
d_llseek='$d_llseek'
d_locconv='$d_locconv'
-d_lockf64='$d_lockf64'
d_lockf='$d_lockf'
d_longdbl='$d_longdbl'
d_longlong='$d_longlong'
-d_lseek64='$d_lseek64'
-d_lstat64='$d_lstat64'
d_lstat='$d_lstat'
-d_madvise='$d_madvise'
d_mblen='$d_mblen'
d_mbstowcs='$d_mbstowcs'
d_mbtowc='$d_mbtowc'
d_mkdir='$d_mkdir'
d_mkfifo='$d_mkfifo'
d_mktime='$d_mktime'
-d_mmap='$d_mmap'
-d_mprotect='$d_mprotect'
d_msg='$d_msg'
d_msg_ctrunc='$d_msg_ctrunc'
d_msg_dontroute='$d_msg_dontroute'
d_msg_proxy='$d_msg_proxy'
d_msgctl='$d_msgctl'
d_msgget='$d_msgget'
-d_msghdr_s='$d_msghdr_s'
d_msgrcv='$d_msgrcv'
d_msgsnd='$d_msgsnd'
-d_msync='$d_msync'
-d_munmap='$d_munmap'
d_mymalloc='$d_mymalloc'
-d_nextkey64='$d_nextkey64'
d_nice='$d_nice'
d_off64_t='$d_off64_t'
-d_offset_t='$d_offset_t'
d_old_pthread_create_joinable='$d_old_pthread_create_joinable'
d_oldpthreads='$d_oldpthreads'
d_oldsock='$d_oldsock'
d_open3='$d_open3'
-d_open64='$d_open64'
-d_opendir64='$d_opendir64'
d_pathconf='$d_pathconf'
d_pause='$d_pause'
d_phostname='$d_phostname'
d_pwgecos='$d_pwgecos'
d_pwpasswd='$d_pwpasswd'
d_pwquota='$d_pwquota'
-d_readdir64='$d_readdir64'
d_readdir='$d_readdir'
d_readlink='$d_readlink'
-d_readv='$d_readv'
-d_recvmsg='$d_recvmsg'
d_rename='$d_rename'
d_rewinddir='$d_rewinddir'
d_rmdir='$d_rmdir'
d_sanemcmp='$d_sanemcmp'
d_sched_yield='$d_sched_yield'
d_scm_rights='$d_scm_rights'
-d_seekdir64='$d_seekdir64'
d_seekdir='$d_seekdir'
d_select='$d_select'
d_sem='$d_sem'
d_semctl_semun='$d_semctl_semun'
d_semget='$d_semget'
d_semop='$d_semop'
-d_sendmsg='$d_sendmsg'
d_setegid='$d_setegid'
d_seteuid='$d_seteuid'
d_setgrent='$d_setgrent'
d_sigsetjmp='$d_sigsetjmp'
d_socket='$d_socket'
d_sockpair='$d_sockpair'
-d_stat64='$d_stat64'
+d_sqrtl='$d_sqrtl'
d_statblks='$d_statblks'
-d_statfs='$d_statfs'
-d_statfsflags='$d_statfsflags'
+d_statfs_f_flags='$d_statfs_f_flags'
+d_statfs_s='$d_statfs_s'
d_statvfs='$d_statvfs'
d_stdio_cnt_lval='$d_stdio_cnt_lval'
d_stdio_ptr_lval='$d_stdio_ptr_lval'
d_stdio_stream_array='$d_stdio_stream_array'
d_stdiobase='$d_stdiobase'
d_stdstdio='$d_stdstdio'
-d_store64='$d_store64'
d_strchr='$d_strchr'
d_strcoll='$d_strcoll'
d_strctcpy='$d_strctcpy'
d_strtod='$d_strtod'
d_strtol='$d_strtol'
d_strtoul='$d_strtoul'
+d_strtoull='$d_strtoull'
d_strxfrm='$d_strxfrm'
d_suidsafe='$d_suidsafe'
d_symlink='$d_symlink'
d_system='$d_system'
d_tcgetpgrp='$d_tcgetpgrp'
d_tcsetpgrp='$d_tcsetpgrp'
-d_telldir64='$d_telldir64'
d_telldir='$d_telldir'
d_telldirproto='$d_telldirproto'
d_time='$d_time'
d_times='$d_times'
-d_tmpfile64='$d_tmpfile64'
-d_truncate64='$d_truncate64'
d_truncate='$d_truncate'
d_tzname='$d_tzname'
d_umask='$d_umask'
d_uname='$d_uname'
d_union_semun='$d_union_semun'
+d_ustat='$d_ustat'
+d_vendorbin='$d_vendorbin'
+d_vendorlib='$d_vendorlib'
d_vfork='$d_vfork'
d_void_closedir='$d_void_closedir'
d_voidsig='$d_voidsig'
d_waitpid='$d_waitpid'
d_wcstombs='$d_wcstombs'
d_wctomb='$d_wctomb'
-d_writev='$d_writev'
d_xenix='$d_xenix'
date='$date'
db_hashtype='$db_hashtype'
i_sysfilio='$i_sysfilio'
i_sysin='$i_sysin'
i_sysioctl='$i_sysioctl'
-i_sysmman='$i_sysmman'
i_sysmount='$i_sysmount'
i_sysndir='$i_sysndir'
i_sysparam='$i_sysparam'
i_sysselct='$i_sysselct'
i_syssockio='$i_syssockio'
i_sysstat='$i_sysstat'
+i_sysstatfs='$i_sysstatfs'
i_sysstatvfs='$i_sysstatvfs'
i_systime='$i_systime'
i_systimek='$i_systimek'
i_systypes='$i_systypes'
i_sysuio='$i_sysuio'
i_sysun='$i_sysun'
+i_sysvfs='$i_sysvfs'
i_syswait='$i_syswait'
i_termio='$i_termio'
i_termios='$i_termios'
i_time='$i_time'
i_unistd='$i_unistd'
+i_ustat='$i_ustat'
i_utime='$i_utime'
i_values='$i_values'
i_varargs='$i_varargs'
installbin='$installbin'
installman1dir='$installman1dir'
installman3dir='$installman3dir'
+installprefix='$installprefix'
+installprefixexp='$installprefixexp'
installprivlib='$installprivlib'
installscript='$installscript'
installsitearch='$installsitearch'
+installsitebin='$installsitebin'
installsitelib='$installsitelib'
+installstyle='$installstyle'
installusrbinperl='$installusrbinperl'
+installvendorbin='$installvendorbin'
+installvendorlib='$installvendorlib'
intsize='$intsize'
known_extensions='$known_extensions'
ksh='$ksh'
ld='$ld'
lddlflags='$lddlflags'
ldflags='$ldflags'
+ldlibpthname='$ldlibpthname'
less='$less'
lib_ext='$lib_ext'
libc='$libc'
man3direxp='$man3direxp'
man3ext='$man3ext'
medium='$medium'
-mips='$mips'
mips_type='$mips_type'
mkdir='$mkdir'
-mmaptype='$mmaptype'
models='$models'
modetype='$modetype'
more='$more'
phostname='$phostname'
pidtype='$pidtype'
plibpth='$plibpth'
+pm_apiversion='$pm_apiversion'
pmake='$pmake'
pr='$pr'
prefix='$prefix'
rm='$rm'
rmail='$rmail'
runnm='$runnm'
+sPRIEldbl='$sPRIEldbl'
+sPRIFldbl='$sPRIFldbl'
+sPRIGldbl='$sPRIGldbl'
+sPRIX64='$sPRIX64'
+sPRId64='$sPRId64'
+sPRIeldbl='$sPRIeldbl'
+sPRIfldbl='$sPRIfldbl'
+sPRIgldbl='$sPRIgldbl'
+sPRIi64='$sPRIi64'
+sPRIo64='$sPRIo64'
+sPRIu64='$sPRIu64'
+sPRIx64='$sPRIx64'
sched_yield='$sched_yield'
scriptdir='$scriptdir'
scriptdirexp='$scriptdirexp'
signal_t='$signal_t'
sitearch='$sitearch'
sitearchexp='$sitearchexp'
+sitebin='$sitebin'
+sitebinexp='$sitebinexp'
sitelib='$sitelib'
sitelibexp='$sitelibexp'
+siteprefix='$siteprefix'
+siteprefixexp='$siteprefixexp'
sizetype='$sizetype'
sleep='$sleep'
smail='$smail'
tr='$tr'
trnl='$trnl'
troff='$troff'
+uidsign='$uidsign'
uidtype='$uidtype'
uname='$uname'
uniq='$uniq'
use64bits='$use64bits'
usedl='$usedl'
+uselargefiles='$uselargefiles'
+uselongdouble='$uselongdouble'
+usemorebits='$usemorebits'
usemultiplicity='$usemultiplicity'
usemymalloc='$usemymalloc'
usenm='$usenm'
useshrplib='$useshrplib'
usesocks='$usesocks'
usethreads='$usethreads'
+usevendorprefix='$usevendorprefix'
usevfork='$usevfork'
usrinc='$usrinc'
uuname='$uuname'
+vendorbin='$vendorbin'
+vendorbinexp='$vendorbinexp'
+vendorlib='$vendorlib'
+vendorlibexp='$vendorlibexp'
+vendorprefix='$vendorprefix'
+vendorprefixexp='$vendorprefixexp'
version='$version'
vi='$vi'
voidflags='$voidflags'
xlibpth='$xlibpth'
+xs_apiversion='$xs_apiversion'
zcat='$zcat'
zip='$zip'
EOT
projects / p5sagit/p5-mst-13.2.git / blobdiff