# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Wed Feb 16 01:07:15 EET 2000 [metaconfig 3.0 PL70]
+# Generated on Wed Aug 16 02:10:47 EET DST 2000 [metaconfig 3.0 PL70]
# (with additional metaconfig patches by perlbug@perl.com)
cat >/tmp/c1$$ <<EOF
d_bincompat5005=''
byteorder=''
cc=''
-gccversion=''
ccflags=''
cppflags=''
ldflags=''
d_endpent=''
d_endpwent=''
d_endsent=''
-d_endspent=''
d_fchmod=''
d_fchown=''
d_fcntl=''
d_flexfnam=''
d_flock=''
d_fork=''
+d_fpos64_t=''
+d_frexpl=''
d_fs_data_s=''
d_fseeko=''
d_fsetpos=''
d_gettimeod=''
d_Gconvert=''
d_getcwd=''
+d_getespwnam=''
+d_getfsstat=''
d_getgrent=''
d_getgrps=''
d_gethbyaddr=''
d_getpbyname=''
d_getpbynumber=''
d_getprotoprotos=''
+d_getprpwnam=''
d_getpwent=''
d_getsent=''
d_getservprotos=''
-d_getspent=''
d_getspnam=''
d_getsbyname=''
d_getsbyport=''
d_htonl=''
d_iconv=''
d_inetaton=''
-d_int64t=''
+d_int64_t=''
d_isascii=''
+d_isnan=''
+d_isnanl=''
d_killpg=''
d_lchown=''
d_ldbl_dig=''
longdblsize=''
d_longlong=''
longlongsize=''
+d_lseekproto=''
d_lstat=''
+d_madvise=''
d_mblen=''
d_mbstowcs=''
d_mbtowc=''
d_mktime=''
d_mmap=''
mmaptype=''
+d_modfl=''
d_mprotect=''
d_msg=''
d_msgctl=''
d_msync=''
d_munmap=''
d_nice=''
+d_off64_t=''
d_open3=''
d_fpathconf=''
d_pathconf=''
d_pipe=''
d_poll=''
d_portable=''
+d_printf_exp_digits=''
d_old_pthread_create_joinable=''
old_pthread_create_joinable=''
d_pthread_yield=''
d_sched_yield=''
sched_yield=''
+d_qgcvt=''
d_readdir=''
d_rewinddir=''
d_seekdir=''
d_bsdsetpgrp=''
d_setpgrp=''
d_setprior=''
+d_setproctitle=''
d_setpwent=''
d_setregid=''
d_setresgid=''
d_setruid=''
d_setsent=''
d_setsid=''
-d_setspent=''
d_setvbuf=''
d_sfio=''
usesfio=''
d_sockpair=''
sockethdr=''
socketlib=''
+d_socklen_t=''
d_sqrtl=''
d_statblks=''
d_statfs_f_flags=''
fflushall=''
fpossize=''
fpostype=''
+gccosandvers=''
+gccversion=''
gidformat=''
gidsign=''
gidsize=''
d_grpasswd=''
i_grp=''
i_iconv=''
+i_ieeefp=''
i_inttypes=''
+i_libutil=''
i_limits=''
i_locale=''
i_machcthr=''
i_niin=''
i_sysin=''
i_poll=''
+i_prot=''
i_pthread=''
d_pwage=''
d_pwchange=''
i_stdlib=''
i_string=''
strings=''
+i_sunmath=''
i_sysaccess=''
i_sysdir=''
i_sysfile=''
i_syssockio=''
i_syslog=''
i_sysmman=''
+i_sysmode=''
i_sysmount=''
i_sysndir=''
i_sysparam=''
intsize=''
longsize=''
shortsize=''
-d_fpos64_t=''
-d_off64_t=''
libc=''
ldlibpthname=''
libperl=''
libsdirs=''
libsfiles=''
libsfound=''
+libspath=''
lns=''
d_PRIEldbl=''
d_PRIFldbl=''
passcat=''
orderlib=''
ranlib=''
+d_perl_otherlibdirs=''
+otherlibdirs=''
package=''
spackage=''
pager=''
api_version=''
api_versionstring=''
patchlevel=''
+revision=''
subversion=''
version=''
+perl5=''
perladmin=''
perlpath=''
d_nv_preserves_uv=''
+d_nv_preserves_uv_bits=''
i16size=''
i16type=''
i32size=''
sitebinexp=''
installsitelib=''
sitelib=''
+sitelib_stem=''
sitelibexp=''
siteprefix=''
siteprefixexp=''
+sizesize=''
sizetype=''
so=''
+socksizetype=''
sharpbang=''
shsharp=''
spitshell=''
uidsize=''
uidtype=''
archname64=''
-use64bits=''
+use64bitall=''
+use64bitint=''
+ccflags_uselargefiles=''
+ldflags_uselargefiles=''
+libswanted_uselargefiles=''
uselargefiles=''
uselongdouble=''
usemorebits=''
incpath=''
mips_type=''
usrinc=''
+d_vendorarch=''
+installvendorarch=''
+vendorarch=''
+vendorarchexp=''
d_vendorbin=''
installvendorbin=''
vendorbin=''
d_vendorlib=''
installvendorlib=''
vendorlib=''
+vendorlib_stem=''
vendorlibexp=''
usevendorprefix=''
vendorprefix=''
groupstype=''
: change the next line if compiling for Xenix/286 on Xenix/386
xlibpth='/usr/lib/386 /lib/386'
-
: Possible local library directories to search.
loclibpth="/usr/local/lib /opt/local/lib /usr/gnu/lib"
loclibpth="$loclibpth /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib"
: general looking path for locating libraries
-glibpth="/usr/lib/large /lib/pa1.1 /lib /usr/lib $xlibpth"
+glibpth="/usr/lib/large /lib /usr/lib $xlibpth"
glibpth="$glibpth /lib/large /usr/lib/small /lib/small"
glibpth="$glibpth /usr/ccs/lib /usr/ucblib /usr/local/lib"
test -f /usr/shlib/libc.so && glibpth="/usr/shlib $glibpth"
libswanted=''
: some systems want to use only the non-versioned libso:s
ignore_versioned_solibs=''
+ccflags_uselargefiles=''
+ldflags_uselargefiles=''
+libswanted_uselargefiles=''
: set usemultiplicity on the Configure command line to enable multiplicity.
: set usesocks on the Configure command line to enable socks.
: set usethreads on the Configure command line to enable threads.
: List of libraries we want.
: If anyone needs -lnet, put it in a hint file.
-libswanted='sfio socket inet nsl nm ndbm gdbm dbm db malloc dl'
+libswanted='sfio socket bind inet nsl nm ndbm gdbm dbm db malloc dl'
libswanted="$libswanted dld ld sun m c cposix posix"
libswanted="$libswanted ndir dir crypt sec"
-libswanted="$libswanted ucb bsd BSD PW x"
+libswanted="$libswanted ucb bsd BSD PW x iconv util"
: We probably want to search /usr/shlib before most other libraries.
: This is only used by the lib/ExtUtils/MakeMaker.pm routine extliblist.
glibpth=`echo " $glibpth " | sed -e 's! /usr/shlib ! !'`
case "$fastread$alldone" in
yescont|yesexit) ;;
*)
- if test ! -t 0; then
- echo "Say 'sh Configure', not 'sh <Configure'"
- exit 1
- fi
+ case "$extractsh" in
+ true) ;;
+ *)
+ if test ! -t 0; then
+ echo "Say 'sh Configure', not 'sh <Configure'"
+ exit 1
+ fi
+ ;;
+ esac
;;
esac
You may safely delete it if you wish.
EOF
+xpatchlevel=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
+case "$usedevel" in
+$define|true|[yY]*) ;;
+*) case "$xpatchlevel" in
+ *[13579])
+ cat >&4 <<EOH
+*** WHOA THERE!!! ***
+
+ This is an UNSTABLE DEVELOPMENT release.
+ (The patchlevel, $xpatchlevel, is odd--as opposed to even,
+ and that signifies a development release. If you want a
+ maintenance release, you want an even-numbered release.)
+
+ Do ***NOT*** install this into production use.
+ Data corruption and crashes are possible.
+
+ It is most seriously suggested that you do not continue any further
+ unless you want to help in developing and debugging Perl.
+
+EOH
+ rp='Do you really want to continue?'
+ dflt='n'
+ . ./myread
+ case "$ans" in
+ [yY]) echo >&4 "Okay, continuing." ;;
+ *) echo >&4 "Okay, bye."
+ exit 1
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
: general instructions
needman=true
firsttime=true
more
nm
nroff
-perl
pg
test
uname
;;
esac
+cat <<EOS >checkcc
+$startsh
+EOS
+cat <<'EOSC' >>checkcc
+case "$cc" in
+'') ;;
+*) $rm -f try try.*
+ $cat >try.c <<EOM
+int main(int argc, char *argv[]) {
+ return 0;
+}
+EOM
+ if $cc -o try try.c; then
+ :
+ else
+ echo "Uh-oh, the C compiler '$cc' doesn't seem to be working." >&4
+ despair=yes
+ trygcc=yes
+ case "$cc" in
+ *gcc*) trygcc=no ;;
+ esac
+ case "`$cc -v -c try.c 2>&1`" in
+ *gcc*) trygcc=no ;;
+ esac
+ if $test X"$trygcc" = Xyes; then
+ if gcc -o try -c try.c; then
+ echo " "
+ echo "You seem to have a working gcc, though." >&4
+ rp="Would you like to use it?"
+ dflt=y
+ if $test -f myread; then
+ . ./myread
+ else
+ if $test -f UU/myread; then
+ . ./UU/myread
+ else
+ echo "Cannot find myread, sorry. Aborting." >&2
+ exit 1
+ fi
+ fi
+ case "$ans" in
+ [yY]*) cc=gcc; ccflags=''; despair=no ;;
+ esac
+ fi
+ fi
+ if $test X"$despair" = Xyes; then
+ echo "You need to find a working C compiler." >&4
+ echo "I cannot continue any further, aborting." >&4
+ exit 1
+ fi
+ fi
+ $rm -f try try.*
+ ;;
+esac
+EOSC
+
: determine whether symbolic links are supported
echo " "
$touch blurfl
;;
esac
fi
+. ./UU/checkcc
if test ! -f config.sh; then
$cat <<EOM
osf1|mls+) case "$5" in
alpha)
osname=dec_osf
- osvers=`echo "$3" | sed 's/^[xvt]//'`
+ osvers=`sizer -v | awk '{print $3}' | tr '[A-Z]' '[a-z]' | sed 's/^[xvt]//'`
+ case "$osvers" in
+ [1-9].[0-9]*) ;;
+ *) osvers=`echo "$3" | sed 's/^[xvt]//'` ;;
+ esac
;;
hp*) osname=hp_osf1 ;;
mips) osname=mips_osf1 ;;
: specified already.
case "$hintfile" in
''|' ')
- file=`echo "${osname}_${osvers}" | $sed -e 's@\.@_@g' -e 's@_$@@'`
+ file=`echo "${osname}_${osvers}" | $sed -e 's%\.%_%g' -e 's%_$%%'`
: Also try without trailing minor version numbers.
- xfile=`echo $file | $sed -e 's@_[^_]*$@@'`
- xxfile=`echo $xfile | $sed -e 's@_[^_]*$@@'`
- xxxfile=`echo $xxfile | $sed -e 's@_[^_]*$@@'`
- xxxxfile=`echo $xxxfile | $sed -e 's@_[^_]*$@@'`
+ xfile=`echo $file | $sed -e 's%_[^_]*$%%'`
+ xxfile=`echo $xfile | $sed -e 's%_[^_]*$%%'`
+ xxxfile=`echo $xxfile | $sed -e 's%_[^_]*$%%'`
+ xxxxfile=`echo $xxxfile | $sed -e 's%_[^_]*$%%'`
case "$file" in
'') dflt=none ;;
*) case "$osvers" in
*) eval "$var=$val";;
esac'
+case "$usethreads" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
cat <<EOM
Perl can be built to take advantage of threads on some systems.
-To do so, Configure must be run with -Dusethreads.
+To do so, Configure can be run with -Dusethreads.
Note that threading is a highly experimental feature, and
some known race conditions still remain. If you choose to try
it, be very sure to not actually deploy it for production
purposes. README.threads has more details, and is required
reading if you enable threads.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
EOM
-case "$usethreads" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
rp='Build a threading Perl?'
. ./myread
case "$ans" in
EOM
val="$define"
;;
-*)
- echo 'Normally you do not need this and you should answer no.'
- case "$usemultiplicity" in
+*) case "$usemultiplicity" in
$define|true|[yY]*) dflt='y';;
*) dflt='n';;
esac
+ echo " "
+ echo "If this doesn't make any sense to you, just accept the default '$dflt'."
rp='Build Perl for multiplicity?'
. ./myread
case "$ans" in
#endif
}
EOP
- ( cc -o pdp11 pdp11.c ) >/dev/null 2>&1
+ case "$cc" in
+ '') modelcc="$cc" ;;
+ *) modelcc="cc" ;;
+ esac
+ ( $modelcc -o pdp11 pdp11.c ) >/dev/null 2>&1
if $test -f pdp11 && ./pdp11 2>/dev/null; then
dflt='unsplit split'
else
if $test -f cc.cbu; then
. ./cc.cbu
fi
+. ./checkcc
+
echo " "
echo "Checking for GNU cc in disguise and/or its version number..." >&4
$cat >gccvers.c <<EOM
exit(0);
}
EOM
-if $cc -o gccvers gccvers.c; then
+if $cc $ldflags -o gccvers gccvers.c; then
gccversion=`./gccvers`
case "$gccversion" in
'') echo "You are not using GNU cc." ;;
case "$gccversion" in
1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
esac
+case "$gccversion" in
+'') gccosandvers='' ;;
+*) gccshortvers=`echo "$gccversion"|sed 's/ .*//'`
+ gccosandvers=`$cc -v 2>&1|grep '/specs$'|sed "s!.*/[^-/]*-[^-/]*-\([^-/]*\)/$gccshortvers/specs!\1!"`
+ gccshortvers=''
+ case "$gccosandvers" in
+ $osname) gccosandvers='' ;; # linux gccs seem to have no linux osvers, grr
+ $osname$osvers) ;; # looking good
+ $osname*) cat <<EOM >&4
+
+*** WHOA THERE!!! ***
+
+ Your gcc has not been compiled for the exact release of
+ your operating system ($gccosandvers versus $osname$osvers).
+
+ In general it is a good idea to keep gcc synchronized with
+ the operating system because otherwise serious problems
+ may ensue when trying to compile software, like Perl.
+
+ I'm trying to be optimistic here, though, and will continue.
+ If later during the configuration and build icky compilation
+ problems appear (headerfile conflicts being the most common
+ manifestation), I suggest reinstalling the gcc to match
+ your operating system release.
+
+EOM
+ ;;
+ *) gccosandvers='' ;; # failed to parse, better be silent
+ esac
+ ;;
+esac
+
+
+
+
+: see how we invoke the C preprocessor
+echo " "
+echo "Now, how can we feed standard input to your C preprocessor..." >&4
+cat <<'EOT' >testcpp.c
+#define ABC abc
+#define XYZ xyz
+ABC.XYZ
+EOT
+cd ..
+if test ! -f cppstdin; then
+ if test "X$osname" = "Xaix" -a "X$gccversion" = X; then
+ # AIX cc -E doesn't show the absolute headerfile
+ # locations but we'll cheat by using the -M flag.
+ echo 'cat >.$$.c; rm -f .$$.u; '"$cc"' ${1+"$@"} -M -c .$$.c 2>/dev/null; test -s .$$.u && awk '"'"'$2 ~ /\.h$/ { print "# 0 \""$2"\"" }'"'"' .$$.u; rm -f .$$.o .$$.u; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' > cppstdin
+ else
+ echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
+ fi
+else
+ echo "Keeping your $hint cppstdin wrapper."
+fi
+chmod 755 cppstdin
+wrapper=`pwd`/cppstdin
+ok='false'
+cd UU
+
+if $test "X$cppstdin" != "X" && \
+ $cppstdin $cppminus <testcpp.c >testcpp.out 2>&1 && \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+then
+ echo "You used to use $cppstdin $cppminus so we'll use that again."
+ case "$cpprun" in
+ '') echo "But let's see if we can live without a wrapper..." ;;
+ *)
+ if $cpprun $cpplast <testcpp.c >testcpp.out 2>&1 && \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+ then
+ echo "(And we'll use $cpprun $cpplast to preprocess directly.)"
+ ok='true'
+ else
+ echo "(However, $cpprun $cpplast does not work, let's see...)"
+ fi
+ ;;
+ esac
+else
+ case "$cppstdin" in
+ '') ;;
+ *)
+ echo "Good old $cppstdin $cppminus does not seem to be of any help..."
+ ;;
+ esac
+fi
+
+if $ok; then
+ : nothing
+elif echo 'Maybe "'"$cc"' -E" will work...'; \
+ $cc -E <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yup, it does."
+ x_cpp="$cc -E"
+ x_minus='';
+elif echo 'Nope...maybe "'"$cc"' -E -" will work...'; \
+ $cc -E - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yup, it does."
+ x_cpp="$cc -E"
+ x_minus='-';
+elif echo 'Nope...maybe "'"$cc"' -P" will work...'; \
+ $cc -P <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yipee, that works!"
+ x_cpp="$cc -P"
+ x_minus='';
+elif echo 'Nope...maybe "'"$cc"' -P -" will work...'; \
+ $cc -P - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "At long last!"
+ x_cpp="$cc -P"
+ x_minus='-';
+elif echo 'No such luck, maybe "'$cpp'" will work...'; \
+ $cpp <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "It works!"
+ x_cpp="$cpp"
+ x_minus='';
+elif echo 'Nixed again...maybe "'$cpp' -" will work...'; \
+ $cpp - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Hooray, it works! I was beginning to wonder."
+ x_cpp="$cpp"
+ x_minus='-';
+elif echo 'Uh-uh. Time to get fancy. Trying a wrapper...'; \
+ $wrapper <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ x_cpp="$wrapper"
+ x_minus=''
+ echo "Eureka!"
+else
+ dflt=''
+ rp="No dice. I can't find a C preprocessor. Name one:"
+ . ./myread
+ x_cpp="$ans"
+ x_minus=''
+ $x_cpp <testcpp.c >testcpp.out 2>&1
+ if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "OK, that will do." >&4
+ else
+echo "Sorry, I can't get that to work. Go find one and rerun Configure." >&4
+ exit 1
+ fi
+fi
+
+case "$ok" in
+false)
+ cppstdin="$x_cpp"
+ cppminus="$x_minus"
+ cpprun="$x_cpp"
+ cpplast="$x_minus"
+ set X $x_cpp
+ shift
+ case "$1" in
+ "$cpp")
+ echo "Perhaps can we force $cc -E using a wrapper..."
+ if $wrapper <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+ then
+ echo "Yup, we can."
+ cppstdin="$wrapper"
+ cppminus='';
+ else
+ echo "Nope, we'll have to live without it..."
+ fi
+ ;;
+ esac
+ case "$cpprun" in
+ "$wrapper")
+ cpprun=''
+ cpplast=''
+ ;;
+ esac
+ ;;
+esac
+
+case "$cppstdin" in
+"$wrapper"|'cppstdin') ;;
+*) $rm -f $wrapper;;
+esac
+$rm -f testcpp.c testcpp.out
: decide how portable to be. Allow command line overrides.
case "$d_portable" in
true)
case "$ansexp" in
/*) value="$ansexp" ;;
+ [a-zA-Z]:/*) value="$ansexp" ;;
*)
redo=true
case "$already" in
Directory)
for fp in $gfpth; do
if test "X$fp" = X.; then
- pf="$ansexp"
+ dir="$ans"
+ direxp="$ansexp"
else
- pf="$fp/$ansexp"
+ dir="$fp/$ansexp"
+ direxp="$fp/$ansexp"
fi
- if test -d "$pf"; then
+ if test -d "$direxp"; then
type=''
- value="$pf"
+ value="$dir"
break
fi
done
/bsd43
#endif
EOCP
- if $cc -E usr.c > usr.out && $contains / usr.out >/dev/null 2>&1; then
+ if cc -E usr.c > usr.out && $contains / usr.out >/dev/null 2>&1; then
dflt='/bsd43/usr/include'
incpath='/bsd43'
mips_type='BSD 4.3'
;;
esac
-: see how we invoke the C preprocessor
-echo " "
-echo "Now, how can we feed standard input to your C preprocessor..." >&4
-cat <<'EOT' >testcpp.c
-#define ABC abc
-#define XYZ xyz
-ABC.XYZ
-EOT
-cd ..
-if test ! -f cppstdin; then
- if test "X$osname" = "Xaix" -a "X$gccversion" = X; then
- # AIX cc -E doesn't show the absolute headerfile
- # locations but we'll cheat by using the -M flag.
- echo 'cat >.$$.c; rm -f .$$.u; '"$cc"' ${1+"$@"} -M -c .$$.c 2>/dev/null; test -s .$$.u && awk '"'"'$2 ~ /\.h$/ { print "# 0 \""$2"\"" }'"'"' .$$.u; rm -f .$$.o .$$.u; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' > cppstdin
- else
- echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
- fi
-else
- echo "Keeping your $hint cppstdin wrapper."
-fi
-chmod 755 cppstdin
-wrapper=`pwd`/cppstdin
-ok='false'
-cd UU
-
-if $test "X$cppstdin" != "X" && \
- $cppstdin $cppminus <testcpp.c >testcpp.out 2>&1 && \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
-then
- echo "You used to use $cppstdin $cppminus so we'll use that again."
- case "$cpprun" in
- '') echo "But let's see if we can live without a wrapper..." ;;
- *)
- if $cpprun $cpplast <testcpp.c >testcpp.out 2>&1 && \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
- then
- echo "(And we'll use $cpprun $cpplast to preprocess directly.)"
- ok='true'
- else
- echo "(However, $cpprun $cpplast does not work, let's see...)"
- fi
- ;;
- esac
-else
- case "$cppstdin" in
- '') ;;
- *)
- echo "Good old $cppstdin $cppminus does not seem to be of any help..."
- ;;
- esac
-fi
-
-if $ok; then
- : nothing
-elif echo 'Maybe "'"$cc"' -E" will work...'; \
- $cc -E <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yup, it does."
- x_cpp="$cc -E"
- x_minus='';
-elif echo 'Nope...maybe "'"$cc"' -E -" will work...'; \
- $cc -E - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yup, it does."
- x_cpp="$cc -E"
- x_minus='-';
-elif echo 'Nope...maybe "'"$cc"' -P" will work...'; \
- $cc -P <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yipee, that works!"
- x_cpp="$cc -P"
- x_minus='';
-elif echo 'Nope...maybe "'"$cc"' -P -" will work...'; \
- $cc -P - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "At long last!"
- x_cpp="$cc -P"
- x_minus='-';
-elif echo 'No such luck, maybe "'$cpp'" will work...'; \
- $cpp <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "It works!"
- x_cpp="$cpp"
- x_minus='';
-elif echo 'Nixed again...maybe "'$cpp' -" will work...'; \
- $cpp - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Hooray, it works! I was beginning to wonder."
- x_cpp="$cpp"
- x_minus='-';
-elif echo 'Uh-uh. Time to get fancy. Trying a wrapper...'; \
- $wrapper <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- x_cpp="$wrapper"
- x_minus=''
- echo "Eureka!"
-else
- dflt=''
- rp="No dice. I can't find a C preprocessor. Name one:"
- . ./myread
- x_cpp="$ans"
- x_minus=''
- $x_cpp <testcpp.c >testcpp.out 2>&1
- if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "OK, that will do." >&4
- else
-echo "Sorry, I can't get that to work. Go find one and rerun Configure." >&4
- exit 1
- fi
-fi
-
-case "$ok" in
-false)
- cppstdin="$x_cpp"
- cppminus="$x_minus"
- cpprun="$x_cpp"
- cpplast="$x_minus"
- set X $x_cpp
- shift
- case "$1" in
- "$cpp")
- echo "Perhaps can we force $cc -E using a wrapper..."
- if $wrapper <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
- then
- echo "Yup, we can."
- cppstdin="$wrapper"
- cppminus='';
- else
- echo "Nope, we'll have to live without it..."
- fi
- ;;
- esac
- case "$cpprun" in
- "$wrapper")
- cpprun=''
- cpplast=''
- ;;
- esac
- ;;
-esac
-
-case "$cppstdin" in
-"$wrapper"|'cppstdin') ;;
-*) $rm -f $wrapper;;
-esac
-$rm -f testcpp.c testcpp.out
-
: Set private lib path
case "$plibpth" in
'') if ./mips; then
'') firstmakefile='makefile';;
esac
+case "$usesocks" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
cat <<EOM
Perl can be built to use the SOCKS proxy protocol library. To do so,
Configure must be run with -Dusesocks.
-Normally you do not need this and you should answer no.
-
+If this doesn't make any sense to you, just accept the default '$dflt'.
EOM
-case "$usesocks" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
rp='Build Perl for SOCKS?'
. ./myread
case "$ans" in
'') libswanted='c_s';;
esac
case "$usesocks" in
-$define)
- libswanted="$libswanted socks5 socks5_sh"
- ;;
+"$define") libswanted="$libswanted socks5 socks5_sh" ;;
esac
+libsfound=''
+libsfiles=''
+libsdirs=''
+libspath=''
+for thisdir in $libpth $xlibpth; do
+ test -d $thisdir && libspath="$libspath $thisdir"
+done
for thislib in $libswanted; do
- for thisdir in $libpth; do
+ for thisdir in $libspath; do
xxx=''
if $test ! -f "$xxx" -a "X$ignore_versioned_solibs" = "X"; then
xxx=`ls $thisdir/lib$thislib.$so.[0-9] 2>/dev/null|tail -1`
xxx=$thisdir/lib${thislib}_s$_a
$test -f "$xxx" && eval $libscheck
$test -f "$xxx" && libstyle=static
+ $test -f "$xxx" && thislib=${thislib}_s
fi
if test ! -f "$xxx"; then
xxx=$thisdir/Slib$thislib$_a
libsfound="$libsfound $xxx"
yyy=`basename $xxx`
libsfiles="$libsfiles $yyy"
- yyy=`echo $xxx|sed "s@/$yyy\\$@@"`
+ yyy=`echo $xxx|$sed -e "s%/$yyy\\$%%"`
case " $libsdirs " in
*" $yyy "*) ;;
*) libsdirs="$libsdirs $yyy" ;;
eval $typedef_ask
echo " "
-$echo $n "Checking to see how big your file offsets are...$c" >&4
+echo "Checking to see how big your file offsets are..." >&4
$cat >try.c <<EOCP
#include <sys/types.h>
#include <stdio.h>
set try
if eval $compile_ok; then
lseeksize=`./try`
- $echo " $lseeksize bytes." >&4
+ echo "Your file offsets are $lseeksize bytes long."
else
dflt=$longsize
echo " "
*_t) zzz="$fpostype" ;;
*) zzz="fpos_t" ;;
esac
-$echo $n "Checking the size of $zzz...$c" >&4
+echo "Checking the size of $zzz..." >&4
cat > try.c <<EOCP
#include <sys/types.h>
#include <stdio.h>
yyy=`./try`
case "$yyy" in
'') fpossize=4
- echo " "
echo "(I can't execute the test program--guessing $fpossize.)" >&4
;;
*) fpossize=$yyy
- echo " $fpossize bytes."
+ echo "Your $zzz is $fpossize bytes long."
;;
esac
else
dflt="$longsize"
- echo " "
+ echo " " >&4
echo "(I can't compile the test program. Guessing...)" >&4
rp="What is the size of your file positions (in bytes)?"
. ./myread
+# Backward compatibility (uselfs is deprecated).
+case "$uselfs" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** Configure -Duselfs is deprecated, using -Duselargefiles instead.
+EOM
+ uselargefiles="$define"
+ ;;
+esac
+
case "$lseeksize:$fpossize" in
8:8) cat <<EOM
You can have files larger than 2 gigabytes.
EOM
val="$define" ;;
-*) cat <<EOM
+*) case "$uselargefiles" in
+ "$undef"|false|[nN]*) dflt='n' ;;
+ *) dflt='y' ;;
+ esac
+ cat <<EOM
Perl can be built to understand large files (files larger than 2 gigabytes)
-on some systems. To do so, Configure must be run with -Duselargefiles.
+on some systems. To do so, Configure can be run with -Duselargefiles.
-If this doesn't make any sense to you, just accept the default 'y'.
+If this doesn't make any sense to you, just accept the default '$dflt'.
EOM
- case "$uselargefiles" in
- "$undef"|false|[nN]*) dflt='n' ;;
- *) dflt='y' ;;
- esac
rp='Try to understand large files, if available?'
. ./myread
case "$ans" in
: Look for a hint-file generated 'call-back-unit'. If the
: user has specified that a large files perl is to be built,
: we may need to set or change some other defaults.
- if $test -f uselfs.cbu; then
+ if $test -f uselargefiles.cbu; then
echo "Your platform has some specific hints for large file builds, using them..."
- . ./uselfs.cbu
+ . ./uselargefiles.cbu
echo " "
- $echo $n "Rechecking to see how big your file offsets are...$c" >&4
+ echo "Rechecking to see how big your file offsets are..." >&4
$cat >try.c <<EOCP
#include <sys/types.h>
#include <stdio.h>
set try
if eval $compile_ok; then
lseeksize=`./try`
- $echo " $lseeksize bytes." >&4
+ $echo "Your file offsets are now $lseeksize bytes long."
else
dflt="$lseeksize"
echo " "
echo "(I can't execute the test program--guessing $fpossize.)" >&4
;;
*) fpossize=$yyy
- echo " $fpossize bytes."
+ echo " $fpossize bytes." >&4
;;
esac
else
case "$usemorebits" in
"$define"|true|[yY]*)
- use64bits="$define"
+ use64bitint="$define"
uselongdouble="$define"
usemorebits="$define"
;;
esac
-case "$intsize:$longsize" in
-8:*|*:8) cat <<EOM
+case "$uselonglong" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** Configure -Duselonglong is deprecated, using -Duse64bitint instead.
+EOM
+ use64bitint="$define"
+ ;;
+esac
+case "$use64bits" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** Configure -Duse64bits is deprecated, using -Duse64bitint instead.
+EOM
+ use64bitint="$define"
+ ;;
+esac
+case "$use64bitints" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** There is no Configure -Duse64bitints, using -Duse64bitint instead.
+EOM
+ use64bitint="$define"
+ ;;
+esac
+case "$use64bitsint" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** There is no Configure -Duse64bitsint, using -Duse64bitint instead.
+EOM
+ use64bitint="$define"
+ ;;
+esac
+case "$uselonglongs" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** There is no Configure -Duselonglongs, using -Duse64bitint instead.
+EOM
+ use64bitint="$define"
+ ;;
+esac
+case "$use64bitsall" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** There is no Configure -Duse64bitsall, using -Duse64bitall instead.
+EOM
+ use64bitall="$define"
+ ;;
+esac
+
+case "$ccflags" in
+*-DUSE_LONG_LONG*|*-DUSE_64_BIT_INT*|*-DUSE_64_BIT_ALL*) use64bitint="$define";;
+esac
+case "$use64bitall" in
+"$define"|true|[yY]*) use64bitint="$define" ;;
+esac
+
+case "$longsize" in
+8) cat <<EOM
-You have natively 64-bit integers.
+You have natively 64-bit long integers.
EOM
val="$define"
;;
-*) case "$ccflags" in
- *-DUSE_64_BITS*|*-DUSE_LONG_LONG*) use64bits="$define";;
- *) case "$uselonglong" in
- $define|true|[yY]*) use64bits="$define";;
- esac
- ;;
- esac
- case "$use64bits" in
- $define|true|[yY]*) dflt='y';;
+*) case "$use64bitint" in
+ "$define"|true|[yY]*) dflt='y';;
*) dflt='n';;
esac
-cat <<EOM
+ cat <<EOM
Perl can be built to take advantage of 64-bit integer types
-on some systems. To do so, Configure must be run with -Duse64bits.
+on some systems. To do so, Configure can be run with -Duse64bitint.
+Choosing this option will most probably introduce binary incompatibilities.
If this doesn't make any sense to you, just accept the default '$dflt'.
EOM
esac
;;
esac
-set use64bits
+set use64bitint
+eval $setvar
+
+case "$use64bitall" in
+"$define"|true|[yY]*) dflt='y' ;;
+*) case "$longsize" in
+ 8) dflt='y' ;;
+ *) dflt='n' ;;
+ esac
+ ;;
+esac
+cat <<EOM
+
+You may also choose to try maximal 64-bitness. It means using as much
+64-bitness as possible on the platform. This in turn means even more
+binary incompatibilities. On the other hand, your platform may not
+have any more 64-bitness available than what you already have chosen.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Try to use maximal 64-bit support, if available?'
+. ./myread
+case "$ans" in
+[yY]*) val="$define" ;;
+*) val="$undef" ;;
+esac
+set use64bitall
eval $setvar
+case "$use64bitall" in
+"$define")
+ case "$use64bitint" in
+ "$undef")
+ cat <<EOM
-case "$archname64" in
-'') archname64='' ;; # not a typo
+Since you have chosen a maximally 64-bit build, I'm also turning on
+the use of 64-bit integers.
+EOM
+ use64bitint="$define" ;;
+ esac
+ ;;
esac
-case "$use64bits" in
+case "$use64bitint" in
"$define"|true|[yY]*)
: Look for a hint-file generated 'call-back-unit'. If the
: user has specified that a 64-bit perl is to be built,
: we may need to set or change some other defaults.
- if $test -f use64bits.cbu; then
+ if $test -f use64bitint.cbu; then
+ echo "Your platform has some specific hints for 64-bit integers, using them..."
+ . ./use64bitint.cbu
+ fi
+ case "$longsize" in
+ 4) case "$archname64" in
+ '') archname64=64int ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
+case "$use64bitall" in
+"$define"|true|[yY]*)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that a maximally 64-bit perl is to be built,
+: we may need to set or change some other defaults.
+ if $test -f use64bitall.cbu; then
echo "Your platform has some specific hints for 64-bit builds, using them..."
- . ./use64bits.cbu
- else
- $cat <<EOM
-(Your platform doesn't have any specific hints for 64-bit builds.)
-EOM
- case "$intsize:$longsize" in
-8:*|*:8) cat <<EOM
-(This is probably okay, as your system is a natively 64-bit system.)
-EOM
- ;;
- esac
- case "$gccversion" in
- '') ;;
- *) case "$ccflags" in
- *-DUSE_64_BITS*) ;;
- *) $cat <<EOM
-But since you seem to be using gcc, I will now add -DUSE_64_BITS
-to the compilation flags to get long longs.
-EOM
- ccflags="$ccflags -DUSE_64_BITS"
- ;;
- esac
- ;;
- esac
+ . ./use64bitall.cbu
fi
+ case "$longsize" in
+ 4) case "$archname64" in
+ ''|64int) archname64=64all ;;
+ esac
+ ;;
+ esac
;;
esac
esac
;;
esac
-case "$use64bits" in
+case "$use64bitint" in
$define)
case "$archname64" in
'')
esac;;
esac'
-: set the base revision
-baserev=5.0
-
: get the patchlevel
echo " "
echo "Getting the current patchlevel..." >&4
if $test -r $rsrc/patchlevel.h;then
+ revision=`awk '/define[ ]+PERL_REVISION/ {print $3}' $rsrc/patchlevel.h`
patchlevel=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
subversion=`awk '/define[ ]+PERL_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
api_revision=`awk '/define[ ]+PERL_API_REVISION/ {print $3}' $rsrc/patchlevel.h`
api_version=`awk '/define[ ]+PERL_API_VERSION/ {print $3}' $rsrc/patchlevel.h`
api_subversion=`awk '/define[ ]+PERL_API_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
else
+ revision=0
patchlevel=0
subversion=0
api_revision=0
api_version=0
api_subversion=0
fi
-$echo $n "(You have $package" $c
-case "$package" in
-"*$baserev") ;;
-*) $echo $n " $baserev" $c ;;
-esac
+$echo $n "(You have $package revision $revision" $c
$echo $n " patchlevel $patchlevel" $c
test 0 -eq "$subversion" || $echo $n " subversion $subversion" $c
echo ".)"
case "$osname" in
dos|vms)
: XXX Should be a Configure test for double-dots in filenames.
- version=`echo $baserev $patchlevel $subversion | \
+ version=`echo $revision $patchlevel $subversion | \
$awk '{ printf "%d_%d_%d\n", $1, $2, $3 }'`
api_versionstring=`echo $api_revision $api_version $api_subversion | \
$awk '{ printf "%d_%d_%d\n", $1, $2, $3 }'`
;;
*)
- version=`echo $baserev $patchlevel $subversion | \
+ version=`echo $revision $patchlevel $subversion | \
$awk '{ printf "%d.%d.%d\n", $1, $2, $3 }'`
api_versionstring=`echo $api_revision $api_version $api_subversion | \
$awk '{ printf "%d.%d.%d\n", $1, $2, $3 }'`
*) dflt='lib/perl5' ;;
esac
;;
-*) dflt='lib/perl5' ;;
+*) dflt="$installstyle" ;;
esac
: Probably not worth prompting for this since we prompt for all
: the directories individually, and the prompt would be too long and
;;
*) $cat <<EOM
-Perl 5.006 can be compiled for binary compatibility with 5.005.
-If you decide to do so, you will be able to continue using most
-of the extensions that were compiled for Perl 5.005.
+This version of Perl can be compiled for binary compatibility with 5.005.
+If you decide to do so, you will be able to continue using most of the
+extensions that were compiled for Perl 5.005.
EOM
case "$bincompat5005$d_bincompat5005" in
$rm -f malloc.[co]
$cat <<EOM
+After $package is installed, you may wish to install various
+add-on modules and utilities. Typically, these add-ons will
+be installed under $prefix with the rest
+of this package. However, you may wish to install such add-ons
+elsewhere under a different prefix.
+
+If you do not wish to put everything under a single prefix, that's
+ok. You will be prompted for the individual locations; this siteprefix
+is only used to suggest the defaults.
+
+The default should be fine for most people.
+
+EOM
+fn=d~+
+rp='Installation prefix to use for add-on modules and utilities?'
+: XXX Here might be another good place for an installstyle setting.
+case "$siteprefix" in
+'') dflt=$prefix ;;
+*) dflt=$siteprefix ;;
+esac
+. ./getfile
+: XXX Prefixit unit does not yet support siteprefix and vendorprefix
+oldsiteprefix=''
+case "$siteprefix" in
+'') ;;
+*) case "$ans" in
+ "$prefix") ;;
+ *) oldsiteprefix="$prefix";;
+ esac
+ ;;
+esac
+siteprefix="$ans"
+siteprefixexp="$ansexp"
+
+: determine where site specific libraries go.
+: Usual default is /usr/local/lib/perl5/site_perl/$version
+: The default "style" setting is made in installstyle.U
+: XXX No longer works with Prefixit stuff.
+prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+case "$sitelib" in
+'') case "$installstyle" in
+ *lib/perl5*) dflt=$siteprefix/lib/$package/site_$prog/$version ;;
+ *) dflt=$siteprefix/lib/site_$prog/$version ;;
+ esac
+ ;;
+*) dflt="$sitelib"
+ ;;
+esac
+$cat <<EOM
+
+The installation process will create a directory for
+site-specific extensions and modules. Most users find it convenient
+to place all site-specific files in this directory rather than in the
+main distribution directory.
+
+EOM
+fn=d~+
+rp='Pathname for the site-specific library files?'
+. ./getfile
+sitelib="$ans"
+sitelibexp="$ansexp"
+sitelib_stem=`echo "$sitelibexp" | sed "s,/$version$,,"`
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitelib=`echo $sitelibexp | $sed "s#^$prefix#$installprefix#"`
+else
+ installsitelib="$sitelibexp"
+fi
+
+: determine where site specific architecture-dependent libraries go.
+: sitelib default is /usr/local/lib/perl5/site_perl/$version
+: sitearch default is /usr/local/lib/perl5/site_perl/$version/$archname
+: sitelib may have an optional trailing /share.
+case "$sitearch" in
+'') dflt=`echo $sitelib | $sed 's,/share$,,'`
+ dflt="$dflt/$archname"
+ ;;
+*) dflt="$sitearch"
+ ;;
+esac
+set sitearch sitearch none
+eval $prefixit
+$cat <<EOM
+
+The installation process will also create a directory for
+architecture-dependent site-specific extensions and modules.
+
+EOM
+fn=d~+
+rp='Pathname for the site-specific architecture-dependent library files?'
+. ./getfile
+sitearch="$ans"
+sitearchexp="$ansexp"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitearch=`echo $sitearchexp | sed "s#^$prefix#$installprefix#"`
+else
+ installsitearch="$sitearchexp"
+fi
+
+$cat <<EOM
+
The installation process will also create a directory for
vendor-supplied add-ons. Vendors who supply perl with their system
may find it convenient to place all vendor-supplied files in this
rp='Do you want to configure vendor-specific add-on directories?'
case "$usevendorprefix" in
define|true|[yY]*) dflt=y ;;
-*) dflt=n ;;
+*) : User may have set vendorprefix directly on Configure command line.
+ case "$vendorprefix" in
+ ''|' ') dflt=n ;;
+ *) dflt=y ;;
+ esac
+ ;;
esac
. ./myread
case "$ans" in
*) dflt=$vendorprefix ;;
esac
. ./getfile
+ : XXX Prefixit unit does not yet support siteprefix and vendorprefix
oldvendorprefix=''
case "$vendorprefix" in
'') ;;
*) d_vendorlib="$define"
: determine where vendor-supplied modules go.
: Usual default is /usr/local/lib/perl5/vendor_perl/$version
- prog=`echo $package | $sed 's/-*[0-9.]*$//'`
- case "$installstyle" in
- *lib/perl5*) dflt=$vendorprefix/lib/$package/vendor_$prog/$version ;;
- *) dflt=$vendorprefix/lib/vendor_$prog/$version ;;
+ case "$vendorlib" in
+ '')
+ prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+ case "$installstyle" in
+ *lib/perl5*) dflt=$vendorprefix/lib/$package/vendor_$prog/$version ;;
+ *) dflt=$vendorprefix/lib/vendor_$prog/$version ;;
+ esac
+ ;;
+ *) dflt="$vendorlib"
+ ;;
esac
fn=d~+
rp='Pathname for the vendor-supplied library files?'
. ./getfile
vendorlib="$ans"
vendorlibexp="$ansexp"
- : Change installation prefix, if necessary.
- if $test X"$prefix" != X"$installprefix"; then
- installvendorlib=`echo $vendorlibexp | $sed "s#^$prefix#$installprefix#"`
- else
- installvendorlib="$vendorlibexp"
- fi
;;
esac
+vendorlib_stem=`echo "$vendorlibexp" | sed "s,/$version$,,"`
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installvendorlib=`echo $vendorlibexp | $sed "s#^$prefix#$installprefix#"`
+else
+ installvendorlib="$vendorlibexp"
+fi
+
+case "$vendorprefix" in
+'') d_vendorarch="$undef"
+ vendorarch=''
+ vendorarchexp=''
+ ;;
+*) d_vendorarch="$define"
+ : determine where vendor-supplied architecture-dependent libraries go.
+ : vendorlib default is /usr/local/lib/perl5/vendor_perl/$version
+ : vendorarch default is /usr/local/lib/perl5/vendor_perl/$version/$archname
+ : vendorlib may have an optional trailing /share.
+ case "$vendorarch" in
+ '') dflt=`echo $vendorlib | $sed 's,/share$,,'`
+ dflt="$dflt/$archname"
+ ;;
+ *) dflt="$vendorarch" ;;
+ esac
+ fn=d~+
+ rp='Pathname for vendor-supplied architecture-dependent files?'
+ . ./getfile
+ vendorarch="$ans"
+ vendorarchexp="$ansexp"
+ ;;
+esac
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installvendorarch=`echo $vendorarchexp | sed "s#^$prefix#$installprefix#"`
+else
+ installvendorarch="$vendorarchexp"
+fi
+
+: Final catch-all directories to search
+$cat <<EOM
+
+Lastly, you can have perl look in other directories for extensions and
+modules in addition to those already specified.
+These directories will be searched after
+ $sitearch
+ $sitelib
+EOM
+test X"$vendorlib" != "X" && echo ' ' $vendorlib
+test X"$vendorarch" != "X" && echo ' ' $vendorarch
+echo ' '
+case "$otherlibdirs" in
+''|' ') dflt='none' ;;
+*) dflt="$otherlibdirs" ;;
+esac
+$cat <<EOM
+Enter a colon-separated set of extra paths to include in perl's @INC
+search path, or enter 'none' for no extra paths.
+
+EOM
+
+rp='Colon-separated list of additional directories for perl to search?'
+. ./myread
+case "$ans" in
+' '|''|none) otherlibdirs=' ' ;;
+*) otherlibdirs="$ans" ;;
+esac
+case "$otherlibdirs" in
+' ') val=$undef ;;
+*) val=$define ;;
+esac
+set d_perl_otherlibdirs
+eval $setvar
: Cruising for prototypes
echo " "
installbin="$binexp"
fi
-$cat <<EOM
-
-After $package is installed, you may wish to install various
-add-on modules and utilities. Typically, these add-ons will
-be installed under $prefix with the rest
-of this package. However, you may wish to install such add-ons
-elsewhere under a different prefix.
-
-If you do not wish to put everything under a single prefix, that's
-ok. You will be prompted for the individual locations; this siteprefix
-is only used to suggest the defaults.
-
-The default should be fine for most people.
-
-EOM
-fn=d~+
-rp='Installation prefix to use for add-on modules and utilities?'
-: XXX Here might be another good place for an installstyle setting.
-case "$siteprefix" in
-'') dflt=$prefix ;;
-*) dflt=$siteprefix ;;
-esac
-. ./getfile
-oldsiteprefix=''
-case "$siteprefix" in
-'') ;;
-*)
- case "$ans" in
- "$prefix") ;;
- *) oldsiteprefix="$prefix";;
- esac
+: Find perl5.005 or later.
+echo "Looking for a previously installed perl5.005 or later... "
+case "$perl5" in
+'') for tdir in `echo "$binexp:$PATH" | $sed "s/$path_sep/ /g"`; do
+ : Check if this perl is recent and can load a simple module
+ if $test -x $tdir/perl && $tdir/perl -Mless -e 'use 5.005;' >/dev/null 2>&1; then
+ perl5=$tdir/perl
+ break;
+ elif $test -x $tdir/perl5 && $tdir/perl5 -Mless -e 'use 5.005;' >/dev/null 2>&1; then
+ perl5=$tdir/perl
+ break;
+ fi
+ done
+ ;;
+*) perl5="$perl5"
;;
esac
-siteprefix="$ans"
-siteprefixexp="$ansexp"
-
-: determine where site specific libraries go.
-: Usual default is /usr/local/lib/perl5/site_perl/$version
-: The default "style" setting is made in installstyle.U
-: XXX No longer works with Prefixit stuff.
-prog=`echo $package | $sed 's/-*[0-9.]*$//'`
-case "$installstyle" in
-*lib/perl5*) dflt=$siteprefix/lib/$package/site_$prog/$version ;;
-*) dflt=$siteprefix/lib/site_$prog/$version ;;
+case "$perl5" in
+'') echo "None found. That's ok.";;
+*) echo "Using $perl5." ;;
esac
-$cat <<EOM
-
-The installation process will create a directory for
-site-specific extensions and modules. Most users find it convenient
-to place all site-specific files in this directory rather than in the
-main distribution directory.
-
-EOM
-fn=d~+
-rp='Pathname for the site-specific library files?'
-. ./getfile
-sitelib="$ans"
-sitelibexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitelib=`echo $sitelibexp | sed "s#^$prefix#$installprefix#"`
-else
- installsitelib="$sitelibexp"
-fi
: Determine list of previous versions to include in @INC
$cat > getverlist <<EOPL
-#!$perl -w
+#!$perl5 -w
use File::Basename;
\$api_versionstring = "$api_versionstring";
\$version = "$version";
-\$sitelib = "$sitelib";
+\$stem = "$sitelib_stem";
\$archname = "$archname";
EOPL
$cat >> getverlist <<'EOPL'
# Can't have leading @ because metaconfig interprets it as a command!
;@inc_version_list=();
-$stem=dirname($sitelib);
-# Redo to do opendir/readdir?
+# XXX Redo to do opendir/readdir?
if (-d $stem) {
chdir($stem);
;@candidates = glob("5.*");
foreach $d (@candidates) {
if ($d lt $version) {
if ($d ge $api_versionstring) {
- unshift(@inc_version_list, "$d/$archname", $d);
+ unshift(@inc_version_list, grep { -d } "$d/$archname", $d);
}
elsif ($d ge "5.005") {
- unshift(@inc_version_list, $d);
+ unshift(@inc_version_list, grep { -d } $d);
}
}
else {
EOPL
chmod +x getverlist
case "$inc_version_list" in
-'') if test -x $perl; then
- dflt=`$perl getverlist`
+'') if test -x "$perl5"; then
+ dflt=`$perl5 getverlist`
else
dflt='none'
fi
$undef) dflt='none' ;;
*) dflt="$inc_version_list" ;;
esac
+case "$dflt" in
+''|' ') dflt=none ;;
+esac
$cat <<'EOM'
In order to ease the process of upgrading, this version of perl
rp='List of earlier versions to include in @INC?'
. ./myread
case "$ans" in
-[Nn]one) inc_version_list=' ' ;;
+[Nn]one|''|' ') inc_version_list=' ' ;;
*) inc_version_list="$ans" ;;
esac
case "$inc_version_list" in
echo " "
if $test -d /usr/bin -a "X$installbin" != X/usr/bin; then
$cat <<EOM
-Many scripts expect to perl to be installed as /usr/bin/perl.
+Many scripts expect perl to be installed as /usr/bin/perl.
I can install the perl you are about to compile also as /usr/bin/perl
(in addition to $installbin/perl).
EOM
. ./getfile
usedl="$define"
: emulate basename
- dlsrc=`echo $ans | $sed -e 's@.*/\([^/]*\)$@\1@'`
+ dlsrc=`echo $ans | $sed -e 's%.*/\([^/]*\)$%\1%'`
$cat << EOM
case "$lddlflags" in
'') case "$osname" in
beos) dflt='-nostart' ;;
- hpux) dflt='-b +vnocompatwarnings' ;;
+ hpux) dflt='-b';
+ case "$gccversion" in
+ '') dflt="$dflt +vnocompatwarnings" ;;
+ esac
+ ;;
linux|irix*) dflt='-shared' ;;
next) dflt='none' ;;
solaris) dflt='-G' ;;
: see if we can have long filenames
echo " "
-rmlist="$rmlist /tmp/cf$$"
-$test -d /tmp/cf$$ || mkdir /tmp/cf$$
first=123456789abcdef
-second=/tmp/cf$$/$first
-$rm -f $first $second
+$rm -f $first
if (echo hi >$first) 2>/dev/null; then
if $test -f 123456789abcde; then
echo 'You cannot have filenames longer than 14 characters. Sigh.' >&4
val="$undef"
else
- if (echo hi >$second) 2>/dev/null; then
- if $test -f /tmp/cf$$/123456789abcde; then
- $cat <<'EOM'
-That's peculiar... You can have filenames longer than 14 characters, but only
-on some of the filesystems. Maybe you are using NFS. Anyway, to avoid problems
-I shall consider your system cannot support long filenames at all.
-EOM
- val="$undef"
- else
- echo 'You can have filenames longer than 14 characters.' >&4
- val="$define"
- fi
- else
- $cat <<'EOM'
-How confusing! Some of your filesystems are sane enough to allow filenames
-longer than 14 characters but some others like /tmp can't even think about them.
-So, for now on, I shall assume your kernel does not allow them at all.
-EOM
- val="$undef"
- fi
+ echo 'You can have filenames longer than 14 characters.'>&4
+ val="$define"
fi
else
$cat <<'EOM'
-You can't have filenames longer than 14 chars. You can't even think about them!
+You can't have filenames longer than 14 chars.
+You can't even think about them!
EOM
val="$undef"
fi
set d_flexfnam
eval $setvar
-$rm -rf /tmp/cf$$ 123456789abcde*
+$rm -rf 123456789abcde*
: determine where library module manual pages go
set man3dir man3dir none
echo "If you don't want the manual sources installed, answer 'none'."
prog=`echo $package | $sed 's/-*[0-9.]*$//'`
case "$man3dir" in
-'') dflt=`echo $man1dir | $sed -e 's/man1/man3/g' -e 's/man\.1/man\.3/g'`
+'') dflt=`echo "$man1dir" | $sed -e 's/man1/man3/g' -e 's/man\.1/man\.3/g'`
if $test -d "$privlib/man/man3"; then
cat <<EOM >&4
esac
fi
;;
-' ') dflt=none;;
*) dflt="$man3dir" ;;
esac
+case "$dflt" in
+' ') dflt=none ;;
+esac
echo " "
fn=dn+~
rp="Where do the $package library man pages (source) go?"
. ./getfile
man3dir="$ans"
man3direxp="$ansexp"
-case "$man1dir" in
+case "$man3dir" in
'') man3dir=' '
installman3dir='';;
esac
installscript="$scriptdirexp"
fi
-: determine where site specific architecture-dependent libraries go.
-: sitelib default is /usr/local/lib/perl5/site_perl/$version
-: sitearch default is /usr/local/lib/perl5/site_perl/$version/$archname
-: sitelib may have an optional trailing /share.
-tdflt=`echo $sitelib | $sed 's,/share$,,'`
-tdflt="$tdflt/$archname"
-set sitearch sitearch none
-eval $prefixit
-case "$sitearch" in
-'') dflt="$tdflt" ;;
-*) dflt="$sitearch" ;;
-esac
-$cat <<EOM
-
-The installation process will also create a directory for
-architecture-dependent site-specific extensions and modules.
-
-EOM
-fn=nd~+
-rp='Pathname for the site-specific architecture-dependent library files?'
-. ./getfile
-sitearch="$ans"
-sitearchexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitearch=`echo $sitearchexp | sed "s#^$prefix#$installprefix#"`
-else
- installsitearch="$sitearchexp"
-fi
-
: determine where add-on public executables go
case "$sitebin" in
'') dflt=$siteprefix/bin ;;
-*) dflt=$sitebin ;;
+*) dflt=$sitebin ;;
esac
fn=d~
rp='Pathname where the add-on public executables should be installed?'
set sqrtl d_sqrtl
eval $inlibc
-cat <<EOM
-
-Perl can be built to take advantage of long doubles which
-(if available) may give more accuracy and range for floating point numbers.
-
-If this doesn't make any sense to you, just accept the default 'n'.
-EOM
-
case "$ccflags" in
*-DUSE_LONG_DOUBLE*|*-DUSE_MORE_BITS*) uselongdouble="$define" ;;
esac
$define|true|[yY]*) dflt='y';;
*) dflt='n';;
esac
+cat <<EOM
+
+Perl can be built to take advantage of long doubles which
+(if available) may give more accuracy and range for floating point numbers.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
rp='Try to use long doubles if available?'
. ./myread
case "$ans" in
$define:$undef)
$cat <<EOM >&4
-You requested the use of long doubles but you do not seem to have
-the mathematic functions for long doubles. I'm disabling the use
-of long doubles.
+*** You requested the use of long doubles but you do not seem to have
+*** the mathematic functions for long doubles. I'm disabling the use
+*** of long doubles.
+
EOM
uselongdouble=$undef
;;
esac
+case "$useperlio" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
cat <<EOM
Previous version of $package used the standard IO mechanisms as defined
problems with some extension modules. Using PerlIO with stdio is safe,
but it is slower than plain stdio and therefore is not the default.
-If this doesn't make any sense to you, just accept the default 'n'.
+If this doesn't make any sense to you, just accept the default '$dflt'.
EOM
-case "$useperlio" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
rp='Use the experimental PerlIO abstraction layer?'
. ./myread
case "$ans" in
;;
*) d_vendorbin="$define"
: determine where vendor-supplied executables go.
- dflt=$vendorprefix/bin
+ case "$vendorbin" in
+ '') dflt=$vendorprefix/bin ;;
+ *) dflt="$vendorbin" ;;
+ esac
fn=d~+
rp='Pathname for the vendor-supplied executables directory?'
. ./getfile
vendorbin="$ans"
vendorbinexp="$ansexp"
- : Change installation prefix, if necessary.
- if $test X"$prefix" != X"$installprefix"; then
- installvendorbin=`echo $vendorbinexp | $sed "s#^$prefix#$installprefix#"`
- else
- installvendorbin="$vendorbinexp"
- fi
;;
esac
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installvendorbin=`echo $vendorbinexp | $sed "s#^$prefix#$installprefix#"`
+else
+ installvendorbin="$vendorbinexp"
+fi
+
+: see if qgcvt exists
+set qgcvt d_qgcvt
+eval $inlibc
: check for length of double
echo " "
case "$doublesize" in
'')
- $echo $n "Checking to see how big your double precision numbers are...$c" >&4
+ echo "Checking to see how big your double precision numbers are..." >&4
$cat >try.c <<'EOCP'
#include <stdio.h>
int main()
set try
if eval $compile_ok; then
doublesize=`./try`
- $echo " $doublesize bytes." >&4
+ echo "Your double is $doublesize bytes long."
else
dflt='8'
echo "(I can't seem to compile the test program. Guessing...)"
: check for long doubles
echo " "
-$echo $n "Checking to see if your system supports long double..." $c >&4
+echo "Checking to see if you have long double..." >&4
echo 'int main() { long double x = 7.0; }' > try.c
set try
if eval $compile; then
val="$define"
- echo " Yes, it does." >&4
+ echo "You have long double."
else
val="$undef"
- echo " No, it doesn't." >&4
+ echo "You do not have long double."
+fi
+$rm try.*
+set d_longdbl
+eval $setvar
+
+: check for length of long double
+case "${d_longdbl}${longdblsize}" in
+$define)
+ echo " "
+ echo "Checking to see how big your long doubles are..." >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", sizeof(long double));
+}
+EOCP
+ set try
+ set try
+ if eval $compile; then
+ longdblsize=`./try$exe_ext`
+ echo "Your long doubles are $longdblsize bytes long."
+ else
+ dflt='8'
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)" >&4
+ rp="What is the size of a long double (in bytes)?"
+ . ./myread
+ longdblsize="$ans"
+ fi
+ if $test "X$doublesize" = "X$longdblsize"; then
+ echo "(That isn't any different from an ordinary double.)"
+ fi
+ ;;
+esac
+$rm -f try.* try
+
+echo " "
+
+if $test X"$d_longdbl" = X"$define"; then
+
+echo "Checking how to print long doubles..." >&4
+
+if $test X"$sPRIfldbl" = X -a X"$doublesize" = X"$longdblsize"; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ double d = 123.456;
+ printf("%.3f\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"f"'; sPRIgldbl='"g"'; sPRIeldbl='"e"';
+ sPRIFldbl='"F"'; sPRIGldbl='"G"'; sPRIEldbl='"E"';
+ echo "We will use %f."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRIfldbl" = X; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long double d = 123.456;
+ printf("%.3llf\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"llf"'; sPRIgldbl='"llg"'; sPRIeldbl='"lle"';
+ sPRIFldbl='"llF"'; sPRIGldbl='"llG"'; sPRIEldbl='"llE"';
+ echo "We will use %llf."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRIfldbl" = X; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long double d = 123.456;
+ printf("%.3Lf\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"Lf"'; sPRIgldbl='"Lg"'; sPRIeldbl='"Le"';
+ sPRIFldbl='"LF"'; sPRIGldbl='"LG"'; sPRIEldbl='"LE"';
+ echo "We will use %Lf."
+ ;;
+ esac
+ fi
fi
-$rm try.*
-set d_longdbl
-eval $setvar
-: check for length of long double
-case "${d_longdbl}${longdblsize}" in
-$define)
- echo " "
- $echo $n "Checking to see how big your long doubles are..." $c >&4
+if $test X"$sPRIfldbl" = X; then
$cat >try.c <<'EOCP'
+#include <sys/types.h>
#include <stdio.h>
-int main()
-{
- printf("%d\n", sizeof(long double));
+int main() {
+ long double d = 123.456;
+ printf("%.3lf\n", d);
}
EOCP
set try
- set try
if eval $compile; then
- longdblsize=`./try$exe_ext`
- $echo " $longdblsize bytes." >&4
- else
- dflt='8'
- echo " "
- echo "(I can't seem to compile the test program. Guessing...)" >&4
- rp="What is the size of a long double (in bytes)?"
- . ./myread
- longdblsize="$ans"
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"lf"'; sPRIgldbl='"lg"'; sPRIeldbl='"le"';
+ sPRIFldbl='"lF"'; sPRIGldbl='"lG"'; sPRIEldbl='"lE"';
+ echo "We will use %lf."
+ ;;
+ esac
fi
- if $test "X$doublesize" = "X$longdblsize"; then
- echo "(That isn't any different from an ordinary double.)"
- fi
+fi
+
+if $test X"$sPRIfldbl" = X; then
+ echo "Cannot figure out how to print long doubles." >&4
+fi
+
+$rm -f try try.*
+
+fi # d_longdbl
+
+case "$sPRIfldbl" in
+'') d_PRIfldbl="$undef"; d_PRIgldbl="$undef"; d_PRIeldbl="$undef";
+ d_PRIFldbl="$undef"; d_PRIGldbl="$undef"; d_PRIEldbl="$undef";
+ ;;
+*) d_PRIfldbl="$define"; d_PRIgldbl="$define"; d_PRIeldbl="$define";
+ d_PRIFldbl="$define"; d_PRIGldbl="$define"; d_PRIEldbl="$define";
;;
esac
-$rm -f try.* try
: Check how to convert floats to strings.
if test "X$d_Gconvert" = X; then
echo " "
echo "Checking for an efficient way to convert floats to strings."
- $cat >try.c <<EOP
+ echo " " > try.c
+ case "$uselongdouble" in
+ "$define") echo "#define USE_LONG_DOUBLE" >>try.c ;;
+ esac
+ case "$d_longdbl" in
+ "$define") echo "#define HAS_LONG_DOUBLE" >>try.c ;;
+ esac
+ case "$d_PRIgldbl" in
+ "$define") echo "#define HAS_PRIgldbl" >>try.c ;;
+ esac
+ $cat >>try.c <<EOP
#ifdef TRY_gconvert
#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
char *myname = "gconvert";
#define DOUBLETYPE long double
#endif
#ifdef TRY_sprintf
+#if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE) && defined(HAS_PRIgldbl)
+#define Gconvert(x,n,t,b) sprintf((b),"%.*"$sPRIgldbl,(n),(x))
+#else
#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
+#endif
char *myname = "sprintf";
#endif
#ifndef DOUBLETYPE
+#if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE)
+#define DOUBLETYPE long double
+#else
#define DOUBLETYPE double
#endif
+#endif
#include <stdio.h>
Gconvert((DOUBLETYPE)1.0, 8, 0, buf);
checkit("1", buf);
+ Gconvert((DOUBLETYPE)1.1, 8, 0, buf);
+ checkit("1.1", buf);
+
+ Gconvert((DOUBLETYPE)1.01, 8, 0, buf);
+ checkit("1.01", buf);
+
+ Gconvert((DOUBLETYPE)1.001, 8, 0, buf);
+ checkit("1.001", buf);
+
+ Gconvert((DOUBLETYPE)1.0001, 8, 0, buf);
+ checkit("1.0001", buf);
+
+ Gconvert((DOUBLETYPE)1.00001, 8, 0, buf);
+ checkit("1.00001", buf);
+
+ Gconvert((DOUBLETYPE)1.000001, 8, 0, buf);
+ checkit("1.000001", buf);
+
Gconvert((DOUBLETYPE)0.0, 8, 0, buf);
checkit("0", buf);
*) xxx_list='gconvert gcvt sprintf' ;;
esac
- case "$d_longdbl$uselongdouble" in
- definedefine) xxx_list="`echo $xxx_list|sed 's/gcvt/qgcvt gcvt/'`" ;;
+ case "$d_longdbl$uselongdouble$d_qgcvt" in
+ "$define$define$define") xxx_list="`echo $xxx_list|sed 's/gcvt/qgcvt gcvt/'`" ;;
esac
for xxx_convert in $xxx_list; do
gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
qgcvt) d_Gconvert='qgcvt((x),(n),(b))' ;;
- *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
+ *) case "$uselongdouble$d_longdbl$d_PRIgldbl" in
+ "$define$define$define")
+ d_Gconvert="sprintf((b),\"%.*$sPRIgldbl\",(n),(x))" ;;
+ *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
+ esac
+ ;;
esac
fi
-echo " "
-
-if $test X"$d_longdbl" = X"$define"; then
-
-echo "Checking how to print long doubles..." >&4
-
-if $test X"$sPRIfldbl" = X -a X"$doublesize" = X"$longdblsize"; then
- $cat >try.c <<'EOCP'
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- double d = 123.456;
- printf("%.3f\n", d);
-}
-EOCP
- set try
- if eval $compile; then
- yyy=`./try$exe_ext`
- case "$yyy" in
- 123.456)
- sPRIfldbl='"f"'; sPRIgldbl='"g"'; sPRIeldbl='"e"';
- sPRIFldbl='"F"'; sPRIGldbl='"G"'; sPRIEldbl='"E"';
- echo "We will use %f."
- ;;
- esac
- fi
-fi
-
-if $test X"$sPRIfldbl" = X; then
- $cat >try.c <<'EOCP'
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- long double d = 123.456;
- printf("%.3llf\n", d);
-}
-EOCP
- set try
- if eval $compile; then
- yyy=`./try$exe_ext`
- case "$yyy" in
- 123.456)
- sPRIfldbl='"llf"'; sPRIgldbl='"llg"'; sPRIeldbl='"lle"';
- sPRIFldbl='"llF"'; sPRIGldbl='"llG"'; sPRIEldbl='"llE"';
- echo "We will use %llf."
- ;;
- esac
- fi
-fi
-
-if $test X"$sPRIfldbl" = X; then
- $cat >try.c <<'EOCP'
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- long double d = 123.456;
- printf("%.3Lf\n", d);
-}
-EOCP
- set try
- if eval $compile; then
- yyy=`./try$exe_ext`
- case "$yyy" in
- 123.456)
- sPRIfldbl='"Lf"'; sPRIgldbl='"Lg"'; sPRIeldbl='"Le"';
- sPRIFldbl='"LF"'; sPRIGldbl='"LG"'; sPRIEldbl='"LE"';
- echo "We will use %Lf."
- ;;
- esac
- fi
-fi
-
-if $test X"$sPRIfldbl" = X; then
- $cat >try.c <<'EOCP'
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- long double d = 123.456;
- printf("%.3lf\n", d);
-}
-EOCP
- set try
- if eval $compile; then
- yyy=`./try$exe_ext`
- case "$yyy" in
- 123.456)
- sPRIfldbl='"lf"'; sPRIgldbl='"lg"'; sPRIeldbl='"le"';
- sPRIFldbl='"lF"'; sPRIGldbl='"lG"'; sPRIEldbl='"lE"';
- echo "We will use %lf."
- ;;
- esac
- fi
-fi
-
-if $test X"$sPRIfldbl" = X; then
- echo "Cannot figure out how to print long doubles." >&4
-fi
-
-$rm -f try try.*
-
-fi # d_longdbl
-
-case "$sPRIfldbl" in
-'') d_PRIfldbl="$undef"; d_PRIgldbl="$undef"; d_PRIeldbl="$undef";
- d_PRIFldbl="$undef"; d_PRIGldbl="$undef"; d_PRIEldbl="$undef";
- ;;
-*) d_PRIfldbl="$define"; d_PRIgldbl="$define"; d_PRIeldbl="$define";
- d_PRIFldbl="$define"; d_PRIGldbl="$define"; d_PRIEldbl="$define";
- ;;
-esac
-
: Initialize h_fcntl
h_fcntl=false
set endservent d_endsent
eval $inlibc
-: see if endspent exists
-set endspent d_endspent
-eval $inlibc
-
: Locate the flags for 'open()'
echo " "
$cat >open3.c <<'EOCP'
#ifdef I_UNISTD
#include <unistd.h>
#endif
-#ifdef $i_string
+#$i_string I_STRING
+#ifdef I_STRING
#include <string.h>
#else
#include <strings.h>
eval $inlibc
-: check for off64_t
-echo " "
-echo "Checking to see if your system supports off64_t..." >&4
-$cat >try.c <<EOCP
-#include <sys/types.h>
-#include <unistd.h>
-int main() { off64_t x = 7; }'
-EOCP
-set try
-if eval $compile; then
- val="$define"
- echo "Yes, it does."
-else
- val="$undef"
- echo "No, it doesn't."
- case "$lseeksize" in
- 8) echo "(Your off_t is 64 bits, so you could use that.)" ;;
- esac
-fi
-$rm -f try.* try
-set d_off64_t
-eval $setvar
-
: check for fpos64_t
echo " "
-echo "Checking to see if your system supports fpos64_t..." >&4
+echo "Checking to see if you have fpos64_t..." >&4
$cat >try.c <<EOCP
-#include <sys/stdio.h>
-int main() { fpos64_t x x = 7; }'
+#include <stdio.h>
+int main() { fpos64_t x = 7; }
EOCP
set try
if eval $compile; then
val="$define"
- echo "Yes, it does."
+ echo "You have fpos64_t."
else
val="$undef"
- echo "No, it doesn't."
+ echo "You do not have fpos64_t."
case "$fpossize" in
8) echo "(Your fpos_t is 64 bits, so you could use that.)" ;;
esac
set d_fpos64_t
eval $setvar
+: see if frexpl exists
+set frexpl d_frexpl
+eval $inlibc
+
hasstruct='varname=$1; struct=$2; shift; shift;
while $test $# -ge 2; do
case "$1" in
set getcwd d_getcwd
eval $inlibc
+: see if getespwnam exists
+set getespwnam d_getespwnam
+eval $inlibc
+
+
+: see if getfsstat exists
+set getfsstat d_getfsstat
+eval $inlibc
+
: see if getgrent exists
set getgrent d_getgrent
eval $inlibc
set d_getprotoprotos getprotoent $i_netdb netdb.h
eval $hasproto
+: see if getprpwnam exists
+set getprpwnam d_getprpwnam
+eval $inlibc
+
: see if getpwent exists
set getpwent d_getpwent
eval $inlibc
set d_getservprotos getservent $i_netdb netdb.h
eval $hasproto
-: see if getspent exists
-set getspent d_getspent
-eval $inlibc
-
: see if getspnam exists
set getspnam d_getspnam
eval $inlibc
: check for int64_t
echo " "
-$echo $n "Checking to see if your system supports int64_t...$c" >&4
+echo "Checking to see if you have int64_t..." >&4
$cat >try.c <<EOCP
#include <sys/types.h>
#$i_inttypes I_INTTYPES
set try
if eval $compile; then
val="$define"
- echo " Yes, it does." >&4
+ echo "You have int64_t."
else
val="$undef"
- echo " No, it doesn't." >&4
+ echo "You do not have int64_t."
fi
$rm -f try try.*
-set d_int64t
+set d_int64_t
eval $setvar
: Look for isascii
eval $setvar
$rm -f isascii*
+: see if isnan exists
+set isnan d_isnan
+eval $inlibc
+
+: see if isnanl exists
+set isnanl d_isnanl
+eval $inlibc
+
: see if killpg exists
set killpg d_killpg
eval $inlibc
: check for long long
echo " "
-$echo $n "Checking to see if your system supports long long..." $c >&4
+echo "Checking to see if you have long long..." >&4
echo 'int main() { long long x = 7; return 0; }' > try.c
set try
if eval $compile; then
val="$define"
- echo " Yes, it does." >&4
+ echo "You have long long."
else
val="$undef"
- echo " No, it doesn't." >&4
+ echo "You do not have long long."
fi
$rm try.*
set d_longlong
case "${d_longlong}${longlongsize}" in
$define)
echo " "
- $echo $n "Checking to see how big your long longs are..." $c >&4
+ echo "Checking to see how big your long longs are..." >&4
$cat >try.c <<'EOCP'
#include <stdio.h>
int main()
set try
if eval $compile_ok; then
longlongsize=`./try$exe_ext`
- $echo " $longlongsize bytes." >&4
+ echo "Your long longs are $longlongsize bytes long."
else
dflt='8'
echo " "
esac
$rm -f try.* try
+: see if prototype for lseek is available
+echo " "
+set d_lseekproto lseek $i_systypes sys/types.h $i_unistd unistd.h
+eval $hasproto
+
: see if lstat exists
set lstat d_lstat
eval $inlibc
+: see if madvise exists
+set madvise d_madvise
+eval $inlibc
+
: see if mblen exists
set mblen d_mblen
eval $inlibc
set mkstemp d_mkstemp
eval $inlibc
-: see if mkstemps exists
-set mkstemps d_mkstemps
-eval $inlibc
+: see if mkstemps exists
+set mkstemps d_mkstemps
+eval $inlibc
+
+: see if mktime exists
+set mktime d_mktime
+eval $inlibc
+
+: see if this is a sys/mman.h system
+set sys/mman.h i_sysmman
+eval $inhdr
+
+: see if mmap exists
+set mmap d_mmap
+eval $inlibc
+: see what shmat returns
+: default to something harmless
+mmaptype='void *'
+case "$i_sysmman$d_mmap" in
+"$define$define")
+ $cat >mmap.c <<'END'
+#include <sys/mman.h>
+void *mmap();
+END
+ if $cc $ccflags -c mmap.c >/dev/null 2>&1; then
+ mmaptype='void *'
+ else
+ mmaptype='caddr_t'
+ fi
+ echo "and it returns ($mmaptype)." >&4
+ ;;
+esac
+
-: see if mktime exists
-set mktime d_mktime
+
+: see if modfl exists
+set modfl d_modfl
eval $inlibc
: see if mprotect exists
eval $setvar
quadkind=3
;;
- *) case "$d_int64t" in
+ *) case "$d_int64_t" in
define)
val=int64_t
set quadtype
'') echo "Alas, no 64-bit integer types in sight." >&4
d_quad="$undef"
;;
-*) if test X"$use64bits" = Xdefine -o X"$longsize" = X8; then
+*) if test X"$use64bitint" = Xdefine -o X"$longsize" = X8; then
verb="will"
else
verb="could"
echo " "
$echo "Choosing the C types to be used for Perl's internal types..." >&4
-case "$use64bits:$d_quad:$quadtype" in
+case "$use64bitint:$d_quad:$quadtype" in
define:define:?*)
ivtype="$quadtype"
uvtype="$uquadtype"
$rm -f try.* try
+case "$d_nv_preserves_uv" in
+"$define") d_nv_preserves_uv_bits=`expr $uvsize \* 8` ;;
+*) $echo "Checking how many bits of your UVs your NVs can preserve..." >&4
+ $cat <<EOP >try.c
+#include <stdio.h>
+int main() {
+ $uvtype u = 0;
+ int n = 8 * $uvsize;
+ int i;
+ for (i = 0; i < n; i++) {
+ u = u << 1 | ($uvtype)1;
+ if (($uvtype)($nvtype)u != u)
+ break;
+ }
+ printf("%d\n", i);
+ exit(0);
+}
+EOP
+ set try
+ if eval $compile; then
+ d_nv_preserves_uv_bits="`./try$exe_ext`"
+ fi
+ case "$d_nv_preserves_uv_bits" in
+ [1-9]*) $echo "Your NVs can preserve $d_nv_preserves_uv_bits bits of your UVs." 2>&1 ;;
+ *) $echo "Can't figure out how many bits your NVs preserve." 2>&1
+ d_nv_preserves_uv_bits="$undef"
+ ;;
+ esac
+ $rm -f try.* try
+ ;;
+esac
+
+
+
+: check for off64_t
+echo " "
+echo "Checking to see if you have off64_t..." >&4
+$cat >try.c <<EOCP
+#include <sys/types.h>
+#include <unistd.h>
+int main() { off64_t x = 7; }
+EOCP
+set try
+if eval $compile; then
+ val="$define"
+ echo "You have off64_t."
+else
+ val="$undef"
+ echo "You do not have off64_t."
+ case "$lseeksize" in
+ 8) echo "(Your off_t is 64 bits, so you could use that.)" ;;
+ esac
+fi
+$rm -f try.* try
+set d_off64_t
+eval $setvar
+
: see if POSIX threads are available
set pthread.h i_pthread
eval $inhdr
set poll d_poll
eval $inlibc
+echo " "
+echo "Checking how many exponent digits your sprintf formats use..."
+$cat >try.c <<'EOSC'
+#include <stdio.h>
+int main() {
+ char b[10];
+ exit(sprintf(b, "%0.1e", 1.2) - 5);
+}
+EOSC
+set try
+if eval $compile; then
+ ./try$_exe
+ case "$?" in
+ 2|3) d_printf_exp_digits=$? ;;
+ esac
+fi
+case "$d_printf_exp_digits" in
+2|3) echo "Your sprintf seems to use $d_printf_exp_digits exponent digits."
+ ;;
+*) cat <<EOM >&4
+I do not understand what your sprintf is saying.
+I'm guessing it uses at least 2 exponent digits.
+EOM
+ d_printf_exp_digits=2
+ ;;
+esac
+$rm -f try try.*
+
: see whether the various POSIXish _yields exist
$cat >try.c <<EOP
set setpriority d_setprior
eval $inlibc
+: see if setproctitle exists
+set setproctitle d_setproctitle
+eval $inlibc
+
: see if setpwent exists
set setpwent d_setpwent
eval $inlibc
set setsid d_setsid
eval $inlibc
-: see if setspent exists
-set setspent d_setspent
-eval $inlibc
-
: see if setvbuf exists
set setvbuf d_setvbuf
eval $inlibc
set strtoll d_strtoll
eval $inlibc
+case "$d_longlong-$d_strtoll" in
+"$define-$define")
+ $cat <<EOM
+Checking whether your strtoll() works okay...
+EOM
+ $cat >try.c <<'EOCP'
+#include <errno.h>
+#ifdef __hpux
+#define strtoll __strtoll
+#endif
+#include <stdio.h>
+extern long long int strtoll(char *s, char **, int);
+static int bad = 0;
+int check(char *s, long long ell, int een) {
+ long long gll;
+ errno = 0;
+ gll = strtoll(s, 0, 10);
+ if (!((gll == ell) && (errno == een)))
+ bad++;
+}
+int main() {
+ check(" 1", 1LL, 0);
+ check(" 0", 0LL, 0);
+ check("-1", -1LL, 0);
+ check("-9223372036854775808", -9223372036854775808LL, 0);
+ check("-9223372036854775808", -9223372036854775808LL, 0);
+ check(" 9223372036854775807", 9223372036854775807LL, 0);
+ check("-9223372036854775808", -9223372036854775808LL, 0);
+ check(" 9223372036854775808", 9223372036854775807LL, ERANGE);
+ check("-9223372036854775809", -9223372036854775808LL, ERANGE);
+ if (!bad)
+ printf("ok\n");
+}
+EOCP
+ set try
+ if eval $compile; then
+ case "`./try`" in
+ ok) echo "Your strtoll() seems to be working okay." ;;
+ *) cat <<EOM >&4
+Your strtoll() doesn't seem to be working okay.
+EOM
+ d_strtoll="$undef"
+ ;;
+ esac
+ fi
+ ;;
+esac
+
: see if strtoul exists
set strtoul d_strtoul
eval $inlibc
set strtoull d_strtoull
eval $inlibc
+case "$d_longlong-$d_strtoull" in
+"$define-$define")
+ $cat <<EOM
+Checking whether your strtoull() works okay...
+EOM
+ $cat >try.c <<'EOCP'
+#include <errno.h>
+#ifdef __hpux
+#define strtoull __strtoull
+#endif
+#include <stdio.h>
+extern unsigned long long int strtoull(char *s, char **, int);
+static int bad = 0;
+int check(char *s, long long eull, int een) {
+ long long gull;
+ errno = 0;
+ gull = strtoull(s, 0, 10);
+ if (!((gull == eull) && (errno == een)))
+ bad++;
+}
+int main() {
+ check(" 1", 1LL, 0);
+ check(" 0", 0LL, 0);
+ check("18446744073709551615", 18446744073709551615ULL, 0);
+ check("18446744073709551616", 18446744073709551615ULL, ERANGE);
+ if (!bad)
+ printf("ok\n");
+}
+EOCP
+ set try
+ if eval $compile; then
+ case "`./try`" in
+ ok) echo "Your strtoull() seems to be working okay." ;;
+ *) cat <<EOM >&4
+Your strtoull() doesn't seem to be working okay.
+EOM
+ d_strtoull="$undef"
+ ;;
+ esac
+ fi
+ ;;
+esac
+
: see if strtouq exists
set strtouq d_strtouq
eval $inlibc
esac
case "$osname" in
-next|rhapsody) multiarch="$define" ;;
+next|rhapsody|darwin) multiarch="$define" ;;
esac
case "$multiarch" in
''|[nN]*) multiarch="$undef" ;;
*)
case "$alignbytes" in
'') echo "Checking alignment constraints..." >&4
- $cat >try.c <<'EOCP'
+ if $test "X$uselongdouble" = Xdefine -a "X$d_longdbl" = Xdefine; then
+ $cat >try.c <<'EOCP'
+typedef long double NV;
+EOCP
+ else
+ $cat >try.c <<'EOCP'
+typedef double NV;
+EOCP
+ fi
+ $cat >>try.c <<'EOCP'
#include <stdio.h>
struct foobar {
char foo;
- double bar;
+ NV bar;
} try_algn;
int main()
{
esac
+: set the base revision
+baserev=5.0
+
: check for ordering of bytes in a long
echo " "
case "$crosscompile$multiarch" in
$rm -f core try.core core.try.*
case "$fflushNULL" in
x) $cat >&4 <<EOM
-Your fflush(NULL) works okay.
+Your fflush(NULL) works okay for output streams.
+Let's see if it clobbers input pipes...
+EOM
+# As of mid-March 2000 all versions of Solaris appear to have a stdio
+# bug that improperly flushes the input end of pipes. So we avoid the
+# autoflush on fork/system/exec support for now. :-(
+$cat >tryp.c <<EOCP
+#include <stdio.h>
+int
+main(int argc, char **argv)
+{
+ char buf[1024];
+ int i;
+ char *bp = buf;
+ while (1) {
+ while ((i = getc(stdin)) != -1
+ && (*bp++ = i) != '\n'
+ && bp < &buf[1024])
+ /* DO NOTHING */ ;
+ *bp = '\0';
+ fprintf(stdout, "%s", buf);
+ fflush(NULL);
+ if (i == -1)
+ return 0;
+ bp = buf;
+ }
+}
+EOCP
+ fflushNULL="$define"
+ set tryp
+ if eval $compile; then
+ $rm -f tryp.out
+ $cat tryp.c | ./tryp$exe_ext 2>/dev/null > tryp.out
+ if cmp tryp.c tryp.out >/dev/null 2>&1; then
+ $cat >&4 <<EOM
+fflush(NULL) seems to behave okay with input streams.
+EOM
+ fflushNULL="$define"
+ else
+ $cat >&4 <<EOM
+Ouch, fflush(NULL) clobbers input pipes! We will not use it.
EOM
- fflushNULL="$define"
+ fflushNULL="$undef"
+ fi
+ fi
+ $rm -f core tryp.c tryp.core core.tryp.*
;;
'') $cat >&4 <<EOM
Your fflush(NULL) isn't working (contrary to ANSI C).
fflushNULL="$undef"
;;
esac
-: check explicit looping only if NULL did not work
+: check explicit looping only if NULL did not work, and if the pipe
+: bug does not show up on an explicit flush too
case "$fflushNULL" in
"$undef")
- : check for fflush all behaviour
- case "$fflushall" in
- '') set try -DTRY_FFLUSH_ALL $output
- if eval $compile; then
- $cat >&4 <<EOM
-(Now testing the other method--but note that also this may fail.)
+ $cat >tryp.c <<EOCP
+#include <stdio.h>
+int
+main(int argc, char **argv)
+{
+ char buf[1024];
+ int i;
+ char *bp = buf;
+ while (1) {
+ while ((i = getc(stdin)) != -1
+ && (*bp++ = i) != '\n'
+ && bp < &buf[1024])
+ /* DO NOTHING */ ;
+ *bp = '\0';
+ fprintf(stdout, "%s", buf);
+ fflush(stdin);
+ if (i == -1)
+ return 0;
+ bp = buf;
+ }
+}
+EOCP
+ set tryp
+ if eval $compile; then
+ $rm -f tryp.out
+ $cat tryp.c | ./tryp$exe_ext 2>/dev/null > tryp.out
+ if cmp tryp.c tryp.out >/dev/null 2>&1; then
+ $cat >&4 <<EOM
+Good, at least fflush(stdin) seems to behave okay when stdin is a pipe.
EOM
- $rm -f try.out
- ./try$exe_ext 2>/dev/null
- if $test -s try.out -a "X$?" = X42; then
- fflushall="`$cat try.out`"
- fi
- fi
- $rm -f core try.core core.try.*
+ : now check for fflushall behaviour
case "$fflushall" in
- x) $cat >&4 <<EOM
+ '') set try -DTRY_FFLUSH_ALL $output
+ if eval $compile; then
+ $cat >&4 <<EOM
+(Now testing the other method--but note that this also may fail.)
+EOM
+ $rm -f try.out
+ ./try$exe_ext 2>/dev/null
+ if $test -s try.out -a "X$?" = X42; then
+ fflushall="`$cat try.out`"
+ fi
+ fi
+ $rm -f core try.core core.try.*
+ case "$fflushall" in
+ x) $cat >&4 <<EOM
Whew. Flushing explicitly all the stdio streams works.
EOM
- fflushall="$define"
- ;;
- '') $cat >&4 <<EOM
+ fflushall="$define"
+ ;;
+ '') $cat >&4 <<EOM
Sigh. Flushing explicitly all the stdio streams doesn't work.
EOM
- fflushall="$undef"
- ;;
- *) $cat >&4 <<EOM
+ fflushall="$undef"
+ ;;
+ *) $cat >&4 <<EOM
Cannot figure out whether flushing stdio streams explicitly works or not.
I'm assuming it doesn't.
EOM
+ fflushall="$undef"
+ ;;
+ esac
+ ;;
+ "$define"|true|[yY]*)
+ fflushall="$define"
+ ;;
+ *)
fflushall="$undef"
;;
esac
- ;;
- "$define"|true|[yY]*)
- fflushall="$define"
- ;;
- *)
+ else
+ $cat >&4 <<EOM
+All is futile. Even fflush(stdin) clobbers input pipes!
+EOM
fflushall="$undef"
- ;;
- esac
+ fi
+ else
+ fflushall="$undef"
+ fi
+ $rm -f core tryp.c tryp.core core.tryp.*
;;
-*) fflushall="$undef"
+*) fflushall="$undef"
;;
esac
+
case "$fflushNULL$fflushall" in
undefundef)
$cat <<EOM
-I cannot figure out how to flush pending stdio output.
+OK, I give up. I cannot figure out how to flush pending stdio output.
+We won't be flushing handles at all before fork/exec/popen.
EOM
;;
esac
echo "(I can't execute the test program--guessing $gidsize.)" >&4
;;
*) gidsize=$yyy
- echo "Your $zzz size is $gidsize bytes."
+ echo "Your $zzz is $gidsize bytes long."
;;
esac
else
*) echo "Nope, it doesn't.";;
esac
-: see if this is a sys/mman.h system
-set sys/mman.h i_sysmman
-eval $inhdr
-
-: see if mmap exists
-set mmap d_mmap
-eval $inlibc
-: see what shmat returns
-: default to something harmless
-mmaptype='void *'
-case "$i_sysmman$d_mmap" in
-"$define$define")
- $cat >mmap.c <<'END'
-#include <sys/mman.h>
-void *mmap();
-END
- if $cc $ccflags -c mmap.c >/dev/null 2>&1; then
- mmaptype='void *'
- else
- mmaptype='caddr_t'
- fi
- echo "and it returns ($mmaptype)." >&4
- ;;
-esac
-
-
-
: see what type is used for mode_t
rp="What is the type used for file modes for system calls (e.g. fchmod())?"
set mode_t modetype int stdio.h sys/types.h
echo " "
case "$ptrsize" in
'')
- $echo $n "Checking to see how big your pointers are...$c" >&4
+ echo "Checking to see how big your pointers are..." >&4
if test "$voidflags" -gt 7; then
echo '#define VOID_PTR char *' > try.c
else
set try
if eval $compile_ok; then
ptrsize=`./try`
- $echo " $ptrsize bytes." >&4
+ echo "Your pointers are $ptrsize bytes long."
else
dflt='4'
echo "(I can't seem to compile the test program. Guessing...)" >&4
}'
$rm -f signal signal.c signal.awk signal.lst signal_cmd
+echo " "
+case "$sizetype" in
+*_t) zzz="$sizetype" ;;
+*) zzz="filesize" ;;
+esac
+echo "Checking the size of $zzz..." >&4
+cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ printf("%d\n", (int)sizeof($sizetype));
+ exit(0);
+}
+EOCP
+set try
+if eval $compile_ok; then
+ yyy=`./try`
+ case "$yyy" in
+ '') sizesize=4
+ echo "(I can't execute the test program--guessing $sizesize.)" >&4
+ ;;
+ *) sizesize=$yyy
+ echo "Your $zzz size is $sizesize bytes."
+ ;;
+ esac
+else
+ sizesize=4
+ echo "(I can't compile the test program--guessing $sizesize.)" >&4
+fi
+
+
+: check for socklen_t
+echo " "
+echo "Checking to see if you have socklen_t..." >&4
+$cat >try.c <<EOCP
+#include <sys/types.h>
+#$d_socket HAS_SOCKET
+#ifdef HAS_SOCKET
+#include <sys/socket.h>
+#endif
+int main() { socklen_t x = 16; }
+EOCP
+set try
+if eval $compile; then
+ val="$define"
+ echo "You have socklen_t."
+else
+ val="$undef"
+ echo "You do not have socklen_t."
+ case "$sizetype" in
+ size_t) echo "(You do have size_t, that might work. Some people are happy with just an int.)" ;;
+ esac
+fi
+$rm -f try try.*
+set d_socklen_t
+eval $setvar
+
+: check for type of the size argument to socket calls
+case "$d_socket" in
+"$define")
+ $cat <<EOM
+
+Checking to see what type is the last argument of accept().
+EOM
+ hdrs="$define sys/types.h $d_socket sys/socket.h"
+ yyy=''
+ case "$d_socklen_t" in
+ "$define") yyy="$yyy socklen_t"
+ esac
+ yyy="$yyy $sizetype int long unsigned"
+ for xxx in $yyy; do
+ case "$socksizetype" in
+ '') try="extern int accept(int, struct sockaddr *, $xxx *);"
+ if ./protochk "$try" $hdrs; then
+ echo "Your system accepts '$xxx *' for the last argument of accept()."
+ socksizetype="$xxx"
+ fi
+ ;;
+ esac
+ done
+: In case none of those worked, prompt the user.
+ case "$socksizetype" in
+ '') rp='What is the type for socket address structure sizes?'
+ dflt='int'
+ . ./myread
+ socksizetype=$ans
+ ;;
+ esac
+ ;;
+*) : no sockets, so pick relatively harmless default
+ socksizetype='int'
+ ;;
+esac
+
: see what type is used for signed size_t
set ssize_t ssizetype int stdio.h sys/types.h
eval $typedef
echo "(I can't execute the test program--guessing $uidsize.)" >&4
;;
*) uidsize=$yyy
- echo "Your $zzz size is $uidsize bytes."
+ echo "Your $zzz is $uidsize bytes long."
;;
esac
else
set iconv.h i_iconv
eval $inhdr
+: see if this is a ieeefp.h system
+set ieeefp.h i_ieeefp
+eval $inhdr
+
+: see if this is a libutil.h system
+set libutil.h i_libutil
+eval $inhdr
+
: see if locale.h is available
set locale.h i_locale
eval $inhdr
set poll.h i_poll
eval $inhdr
+: see if this is a prot.h system
+set prot.h i_prot
+eval $inhdr
+
echo " "
$echo "Guessing which symbols your C compiler and preprocessor define..." >&4
$cat <<'EOSH' > Cppsym.know
EOSH
./tr '[a-z]' '[A-Z]' < Cppsym.know > Cppsym.a
./tr '[A-Z]' '[a-z]' < Cppsym.know > Cppsym.b
-$cat Cppsym.a Cppsym.b | $tr ' ' $trnl | sort | uniq > Cppsym.know
-$rm -f Cppsym.a Cppsym.b
+$cat Cppsym.know > Cppsym.c
+$cat Cppsym.a Cppsym.b Cppsym.c | $tr ' ' $trnl | sort | uniq > Cppsym.know
+$rm -f Cppsym.a Cppsym.b Cppsym.c
cat <<EOSH > Cppsym
$startsh
if $test \$# -gt 0; then
echo '}' >> try.c
EOSH
cat <<EOSH >> Cppsym.try
-cc="$cc"
-optimize="$optimize"
ccflags="$ccflags"
-ldflags="$ldflags"
-libs="$libs"
-exe_ext="$exe_ext"
-$cc $optimize $ccflags $ldflags -o try try.c $libs && ./try$exe_ext
+case "$osname-$gccversion" in
+irix-) ccflags="\$ccflags -woff 1178" ;;
+os2-*) ccflags="\$ccflags -Zlinker /PM:VIO" ;;
+esac
+$cc $optimize \$ccflags $ldflags -o try try.c $libs && ./try$exe_ext
EOSH
chmod +x Cppsym.try
$eunicefix Cppsym.try
else
if $test -s ccsym.com; then
echo "Your C compiler and pre-processor define these symbols:"
- $sed -e 's/\(.*\)=.*/\1/' ccsym.com
+ $sed -e 's/\(..*\)=.*/\1/' ccsym.com
also='also '
symbols='ones'
cppccsymbols=`$cat ccsym.com`
if $test -s ccsym.cpp; then
$test "$also" && echo " "
echo "Your C pre-processor ${also}defines the following symbols:"
- $sed -e 's/\(.*\)=.*/\1/' ccsym.cpp
+ $sed -e 's/\(..*\)=.*/\1/' ccsym.cpp
also='further '
cppsymbols=`$cat ccsym.cpp`
cppsymbols=`echo $cppsymbols`
if $test -s ccsym.own; then
$test "$also" && echo " "
echo "Your C compiler ${also}defines the following cpp symbols:"
- $sed -e 's/\(.*\)=1/\1/' ccsym.own
- $sed -e 's/\(.*\)=.*/\1/' ccsym.own | $uniq >>Cppsym.true
+ $sed -e 's/\(..*\)=1/\1/' ccsym.own
+ $sed -e 's/\(..*\)=.*/\1/' ccsym.own | $uniq >>Cppsym.true
ccsymbols=`$cat ccsym.own`
ccsymbols=`echo $ccsymbols`
$test "$silent" || sleep 1
fi
fi
-$rm -f ccsym*
+$rm -f ccsym* Cppsym.*
: see if this is a termio system
val="$undef"
set stddef.h i_stddef
eval $inhdr
+: see if this is a sunmath.h system
+set sunmath.h i_sunmath
+eval $inhdr
+
: see if sys/access.h is available
set sys/access.h i_sysaccess
eval $inhdr
set syslog.h i_syslog
eval $inhdr
+
+: see if this is a sys/mode.h system
+set sys/mode.h i_sysmode
+eval $inhdr
+
: see if sys/resource.h has to be included
set sys/resource.h i_sysresrc
eval $inhdr
NDBM_File|ndbm_fil)
case "$i_ndbm" in
$define)
- case "$osname-$use64bits" in
+ case "$osname-$use64bitint" in
hpux-define)
case "$libs" in
*-lndbm*) avail_ext="$avail_ext $xxx" ;;
ODBM_File|odbm_fil)
case "${i_dbm}${i_rpcsvcdbm}" in
*"${define}"*)
- case "$osname-$use64bits" in
+ case "$osname-$use64bitint" in
hpux-define)
case "$libs" in
*-ldbm*) avail_ext="$avail_ext $xxx" ;;
true|$define|y) avail_ext="$avail_ext $xxx" ;;
esac
;;
+ Sys/Syslog|sys/syslog)
+ : XXX syslog requires socket
+ case "$d_socket" in
+ true|$define|y) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
Thread|thread)
case "$usethreads" in
true|$define|y) avail_ext="$avail_ext $xxx" ;;
cccdlflags='$cccdlflags'
ccdlflags='$ccdlflags'
ccflags='$ccflags'
+ccflags_uselargefiles='$ccflags_uselargefiles'
ccsymbols='$ccsymbols'
cf_by='$cf_by'
cf_email='$cf_email'
d_endpent='$d_endpent'
d_endpwent='$d_endpwent'
d_endsent='$d_endsent'
-d_endspent='$d_endspent'
d_eofnblk='$d_eofnblk'
d_eunice='$d_eunice'
d_fchmod='$d_fchmod'
d_fork='$d_fork'
d_fpathconf='$d_fpathconf'
d_fpos64_t='$d_fpos64_t'
+d_frexpl='$d_frexpl'
d_fs_data_s='$d_fs_data_s'
d_fseeko='$d_fseeko'
d_fsetpos='$d_fsetpos'
d_ftello='$d_ftello'
d_ftime='$d_ftime'
d_getcwd='$d_getcwd'
+d_getespwnam='$d_getespwnam'
+d_getfsstat='$d_getfsstat'
d_getgrent='$d_getgrent'
d_getgrps='$d_getgrps'
d_gethbyaddr='$d_gethbyaddr'
d_getppid='$d_getppid'
d_getprior='$d_getprior'
d_getprotoprotos='$d_getprotoprotos'
+d_getprpwnam='$d_getprpwnam'
d_getpwent='$d_getpwent'
d_getsbyname='$d_getsbyname'
d_getsbyport='$d_getsbyport'
d_getsent='$d_getsent'
d_getservprotos='$d_getservprotos'
-d_getspent='$d_getspent'
d_getspnam='$d_getspnam'
d_gettimeod='$d_gettimeod'
d_gnulibc='$d_gnulibc'
d_iconv='$d_iconv'
d_index='$d_index'
d_inetaton='$d_inetaton'
-d_int64t='$d_int64t'
+d_int64_t='$d_int64_t'
d_isascii='$d_isascii'
+d_isnan='$d_isnan'
+d_isnanl='$d_isnanl'
d_killpg='$d_killpg'
d_lchown='$d_lchown'
d_ldbl_dig='$d_ldbl_dig'
d_lockf='$d_lockf'
d_longdbl='$d_longdbl'
d_longlong='$d_longlong'
+d_lseekproto='$d_lseekproto'
d_lstat='$d_lstat'
+d_madvise='$d_madvise'
d_mblen='$d_mblen'
d_mbstowcs='$d_mbstowcs'
d_mbtowc='$d_mbtowc'
d_mkstemps='$d_mkstemps'
d_mktime='$d_mktime'
d_mmap='$d_mmap'
+d_modfl='$d_modfl'
d_mprotect='$d_mprotect'
d_msg='$d_msg'
d_msg_ctrunc='$d_msg_ctrunc'
d_mymalloc='$d_mymalloc'
d_nice='$d_nice'
d_nv_preserves_uv='$d_nv_preserves_uv'
+d_nv_preserves_uv_bits='$d_nv_preserves_uv_bits'
d_off64_t='$d_off64_t'
d_old_pthread_create_joinable='$d_old_pthread_create_joinable'
d_oldpthreads='$d_oldpthreads'
d_open3='$d_open3'
d_pathconf='$d_pathconf'
d_pause='$d_pause'
+d_perl_otherlibdirs='$d_perl_otherlibdirs'
d_phostname='$d_phostname'
d_pipe='$d_pipe'
d_poll='$d_poll'
d_portable='$d_portable'
+d_printf_exp_digits='$d_printf_exp_digits'
d_pthread_yield='$d_pthread_yield'
d_pwage='$d_pwage'
d_pwchange='$d_pwchange'
d_pwgecos='$d_pwgecos'
d_pwpasswd='$d_pwpasswd'
d_pwquota='$d_pwquota'
+d_qgcvt='$d_qgcvt'
d_quad='$d_quad'
d_readdir='$d_readdir'
d_readlink='$d_readlink'
d_setpgrp2='$d_setpgrp2'
d_setpgrp='$d_setpgrp'
d_setprior='$d_setprior'
+d_setproctitle='$d_setproctitle'
d_setpwent='$d_setpwent'
d_setregid='$d_setregid'
d_setresgid='$d_setresgid'
d_setruid='$d_setruid'
d_setsent='$d_setsent'
d_setsid='$d_setsid'
-d_setspent='$d_setspent'
d_setvbuf='$d_setvbuf'
d_sfio='$d_sfio'
d_shm='$d_shm'
d_sigaction='$d_sigaction'
d_sigsetjmp='$d_sigsetjmp'
d_socket='$d_socket'
+d_socklen_t='$d_socklen_t'
d_sockpair='$d_sockpair'
d_sqrtl='$d_sqrtl'
d_statblks='$d_statblks'
d_uname='$d_uname'
d_union_semun='$d_union_semun'
d_ustat='$d_ustat'
+d_vendorarch='$d_vendorarch'
d_vendorbin='$d_vendorbin'
d_vendorlib='$d_vendorlib'
d_vfork='$d_vfork'
full_ar='$full_ar'
full_csh='$full_csh'
full_sed='$full_sed'
+gccosandvers='$gccosandvers'
gccversion='$gccversion'
gidformat='$gidformat'
gidsign='$gidsign'
i_gdbm='$i_gdbm'
i_grp='$i_grp'
i_iconv='$i_iconv'
+i_ieeefp='$i_ieeefp'
i_inttypes='$i_inttypes'
+i_libutil='$i_libutil'
i_limits='$i_limits'
i_locale='$i_locale'
i_machcthr='$i_machcthr'
i_netinettcp='$i_netinettcp'
i_niin='$i_niin'
i_poll='$i_poll'
+i_prot='$i_prot'
i_pthread='$i_pthread'
i_pwd='$i_pwd'
i_rpcsvcdbm='$i_rpcsvcdbm'
i_stddef='$i_stddef'
i_stdlib='$i_stdlib'
i_string='$i_string'
+i_sunmath='$i_sunmath'
i_sysaccess='$i_sysaccess'
i_sysdir='$i_sysdir'
i_sysfile='$i_sysfile'
i_sysioctl='$i_sysioctl'
i_syslog='$i_syslog'
i_sysmman='$i_sysmman'
+i_sysmode='$i_sysmode'
i_sysmount='$i_sysmount'
i_sysndir='$i_sysndir'
i_sysparam='$i_sysparam'
installsitelib='$installsitelib'
installstyle='$installstyle'
installusrbinperl='$installusrbinperl'
+installvendorarch='$installvendorarch'
installvendorbin='$installvendorbin'
installvendorlib='$installvendorlib'
intsize='$intsize'
ld='$ld'
lddlflags='$lddlflags'
ldflags='$ldflags'
+ldflags_uselargefiles='$ldflags_uselargefiles'
ldlibpthname='$ldlibpthname'
less='$less'
lib_ext='$lib_ext'
libsdirs='$libsdirs'
libsfiles='$libsfiles'
libsfound='$libsfound'
+libspath='$libspath'
libswanted='$libswanted'
+libswanted_uselargefiles='$libswanted_uselargefiles'
line='$line'
lint='$lint'
lkflags='$lkflags'
orderlib='$orderlib'
osname='$osname'
osvers='$osvers'
+otherlibdirs='$otherlibdirs'
package='$package'
pager='$pager'
passcat='$passcat'
patchlevel='$patchlevel'
path_sep='$path_sep'
+perl5='$perl5'
perl='$perl'
perladmin='$perladmin'
perlpath='$perlpath'
randseedtype='$randseedtype'
ranlib='$ranlib'
rd_nodata='$rd_nodata'
+revision='$revision'
rm='$rm'
rmail='$rmail'
runnm='$runnm'
sitebin='$sitebin'
sitebinexp='$sitebinexp'
sitelib='$sitelib'
+sitelib_stem='$sitelib_stem'
sitelibexp='$sitelibexp'
siteprefix='$siteprefix'
siteprefixexp='$siteprefixexp'
+sizesize='$sizesize'
sizetype='$sizetype'
sleep='$sleep'
smail='$smail'
so='$so'
sockethdr='$sockethdr'
socketlib='$socketlib'
+socksizetype='$socksizetype'
sort='$sort'
spackage='$spackage'
spitshell='$spitshell'
uniq='$uniq'
uquadtype='$uquadtype'
use5005threads='$use5005threads'
-use64bits='$use64bits'
+use64bitall='$use64bitall'
+use64bitint='$use64bitint'
usedl='$usedl'
useithreads='$useithreads'
uselargefiles='$uselargefiles'
uvtype='$uvtype'
uvuformat='$uvuformat'
uvxformat='$uvxformat'
+vendorarch='$vendorarch'
+vendorarchexp='$vendorarchexp'
vendorbin='$vendorbin'
vendorbinexp='$vendorbinexp'
vendorlib='$vendorlib'
+vendorlib_stem='$vendorlib_stem'
vendorlibexp='$vendorlibexp'
vendorprefix='$vendorprefix'
vendorprefixexp='$vendorprefixexp'