# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Wed Jul 12 00:20:11 EET DST 2000 [metaconfig 3.0 PL70]
-# (with additional metaconfig patches by perlbug@perl.com)
+# Generated on Thu Oct 5 01:50:43 EET DST 2000 [metaconfig 3.0 PL70]
+# (with additional metaconfig patches by perlbug@perl.org)
cat >/tmp/c1$$ <<EOF
ARGGGHHHH!!!!!
test -d UU || mkdir UU
cd UU && rm -f ./*
+ccname=''
+ccversion=''
ccsymbols=''
cppccsymbols=''
cppsymbols=''
+perllibs=''
dynamic_ext=''
extensions=''
known_extensions=''
d_bsdsetpgrp=''
d_setpgrp=''
d_setprior=''
+d_setproctitle=''
d_setpwent=''
d_setregid=''
d_setresgid=''
sockethdr=''
socketlib=''
d_socklen_t=''
+d_socks5_init=''
d_sqrtl=''
d_statblks=''
d_statfs_f_flags=''
fflushall=''
fpossize=''
fpostype=''
+gccosandvers=''
gccversion=''
gidformat=''
gidsign=''
i_iconv=''
i_ieeefp=''
i_inttypes=''
+i_libutil=''
i_limits=''
i_locale=''
i_machcthr=''
inc_version_list_init=''
installprefix=''
installprefixexp=''
+installscripts=''
installstyle=''
installusrbinperl=''
intsize=''
libsfound=''
libspath=''
lns=''
-d_PRIEldbl=''
-d_PRIFldbl=''
-d_PRIGldbl=''
+d_PRIEUldbl=''
+d_PRIFUldbl=''
+d_PRIGUldbl=''
d_PRIeldbl=''
d_PRIfldbl=''
d_PRIgldbl=''
-sPRIEldbl=''
-sPRIFldbl=''
-sPRIGldbl=''
+d_SCNfldbl=''
+sPRIEUldbl=''
+sPRIFUldbl=''
+sPRIGUldbl=''
sPRIeldbl=''
sPRIfldbl=''
sPRIgldbl=''
+sSCNfldbl=''
lseeksize=''
lseektype=''
make_set_make=''
man3dir=''
man3direxp=''
man3ext=''
-huge=''
-large=''
-medium=''
-models=''
-small=''
-split=''
modetype=''
multiarch=''
mydomain=''
uvsize=''
uvtype=''
ivdformat=''
+nvEUformat=''
+nvFUformat=''
+nvGUformat=''
+nveformat=''
+nvfformat=''
+nvgformat=''
+uvXUformat=''
uvoformat=''
uvuformat=''
uvxformat=''
privlibexp=''
prototype=''
ptrsize=''
-d_PRIX64=''
+d_PRIXU64=''
d_PRId64=''
d_PRIi64=''
d_PRIo64=''
d_PRIu64=''
d_PRIx64=''
-sPRIX64=''
+sPRIXU64=''
sPRId64=''
sPRIi64=''
sPRIo64=''
archname64=''
use64bitall=''
use64bitint=''
+ccflags_uselargefiles=''
+ldflags_uselargefiles=''
+libswanted_uselargefiles=''
uselargefiles=''
uselongdouble=''
usemorebits=''
fi
i_whoami=''
+ccname=''
+ccversion=''
+perllibs=''
: set useposix=false in your hint file to disable the POSIX extension.
useposix=true
: set useopcode=false in your hint file to disable the Opcode extension.
_exe=''
: Extra object files, if any, needed on this platform.
archobjs=''
+archname=''
: Possible local include directories to search.
: Set locincpth to "" in a hint file to defeat local include searches.
locincpth="/usr/local/include /opt/local/include /usr/gnu/include"
loclibpth="$loclibpth /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib"
: general looking path for locating libraries
-glibpth="/usr/lib/large /lib /usr/lib $xlibpth"
-glibpth="$glibpth /lib/large /usr/lib/small /lib/small"
+glibpth="/lib /usr/lib $xlibpth"
glibpth="$glibpth /usr/ccs/lib /usr/ucblib /usr/local/lib"
test -f /usr/shlib/libc.so && glibpth="/usr/shlib $glibpth"
test -f /shlib/libc.so && glibpth="/shlib $glibpth"
libswanted=''
: some systems want to use only the non-versioned libso:s
ignore_versioned_solibs=''
+archname64=''
+ccflags_uselargefiles=''
+ldflags_uselargefiles=''
+libswanted_uselargefiles=''
: set usemultiplicity on the Configure command line to enable multiplicity.
: set usesocks on the Configure command line to enable socks.
: set usethreads on the Configure command line to enable threads.
libswanted='sfio socket bind inet nsl nm ndbm gdbm dbm db malloc dl'
libswanted="$libswanted dld ld sun m c cposix posix"
libswanted="$libswanted ndir dir crypt sec"
-libswanted="$libswanted ucb bsd BSD PW x iconv"
+libswanted="$libswanted ucb bsd BSD PW x iconv util"
: We probably want to search /usr/shlib before most other libraries.
: This is only used by the lib/ExtUtils/MakeMaker.pm routine extliblist.
glibpth=`echo " $glibpth " | sed -e 's! /usr/shlib ! !'`
$me: Fatal Error: I can't find a Bourne Shell anywhere.
Usually it's in /bin/sh. How did you even get this far?
-Please contact me (Perl Maintainers) at perlbug@perl.com and
+Please contact me (Perl Maintainers) at perlbug@perl.org and
we'll try to straighten this all out.
EOM
exit 1
You have the option of continuing the configuration process, despite the
distinct possibility that your kit is damaged, by typing 'y'es. If you
do, don't blame me if something goes wrong. I advise you to type 'n'o
-and contact the author (perlbug@perl.com).
+and contact the author (perlbug@perl.org).
EOM
echo $n "Continue? [n] $c" >&4
You may safely delete it if you wish.
EOF
+xversion=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
+case "$usedevel" in
+$define|true|[yY]*) ;;
+*) case "$xversion" in
+ *[13579])
+ cat >&4 <<EOH
+*** WHOA THERE!!! ***
+
+ This is an UNSTABLE DEVELOPMENT release.
+ The version of this $package distribution is $xversion, that is, odd,
+ (as opposed to even) and that signifies a development release.
+ If you want a maintenance release, you want an even-numbered version.
+
+ Do ***NOT*** install this into production use.
+ Data corruption and crashes are possible.
+
+ It is most seriously suggested that you do not continue any further
+ unless you want to help in developing and debugging Perl.
+
+EOH
+ rp='Do you really want to continue?'
+ dflt='n'
+ . ./myread
+ case "$ans" in
+ [yY]) echo >&4 "Okay, continuing." ;;
+ *) echo >&4 "Okay, bye."
+ exit 1
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
: general instructions
needman=true
firsttime=true
Unix system. If despite that it blows up on yours, your best bet is to edit
Configure and run it again. If you can't run Configure for some reason,
you'll have to generate a config.sh file by hand. Whatever problems you
-have, let me (perlbug@perl.com) know how I blew it.
+have, let me (perlbug@perl.org) know how I blew it.
This installation script affects things in two ways:
;;
esac
+cat <<EOS >checkcc
+$startsh
+EOS
+cat <<'EOSC' >>checkcc
+case "$cc" in
+'') ;;
+*) $rm -f try try.*
+ $cat >try.c <<EOM
+int main(int argc, char *argv[]) {
+ return 0;
+}
+EOM
+ if $cc -o try try.c; then
+ :
+ else
+ echo "Uh-oh, the C compiler '$cc' doesn't seem to be working." >&4
+ despair=yes
+ trygcc=yes
+ case "$cc" in
+ *gcc*) trygcc=no ;;
+ esac
+ case "`$cc -v -c try.c 2>&1`" in
+ *gcc*) trygcc=no ;;
+ esac
+ if $test X"$trygcc" = Xyes; then
+ if gcc -o try -c try.c; then
+ echo " "
+ echo "You seem to have a working gcc, though." >&4
+ rp="Would you like to use it?"
+ dflt=y
+ if $test -f myread; then
+ . ./myread
+ else
+ if $test -f UU/myread; then
+ . ./UU/myread
+ else
+ echo "Cannot find myread, sorry. Aborting." >&2
+ exit 1
+ fi
+ fi
+ case "$ans" in
+ [yY]*) cc=gcc; ccname=gcc; ccflags=''; despair=no ;;
+ esac
+ fi
+ fi
+ if $test X"$despair" = Xyes; then
+ echo "You need to find a working C compiler." >&4
+ echo "I cannot continue any further, aborting." >&4
+ exit 1
+ fi
+ fi
+ $rm -f try try.*
+ ;;
+esac
+EOSC
+
: determine whether symbolic links are supported
echo " "
$touch blurfl
;;
esac
fi
+. ./UU/checkcc
if test ! -f config.sh; then
$cat <<EOM
(cd $src/hints; ls -C *.sh) | $sed 's/\.sh/ /g' >&4
dflt=''
: Half the following guesses are probably wrong... If you have better
- : tests or hints, please send them to perlbug@perl.com
+ : tests or hints, please send them to perlbug@perl.org
: The metaconfig authors would also appreciate a copy...
$test -f /irix && osname=irix
$test -f /xenix && osname=sco_xenix
osf1|mls+) case "$5" in
alpha)
osname=dec_osf
- osvers=`echo "$3" | sed 's/^[xvt]//'`
+ osvers=`sizer -v | awk '{print $3}' | tr '[A-Z]' '[a-z]' | sed 's/^[xvt]//'`
+ case "$osvers" in
+ [1-9].[0-9]*) ;;
+ *) osvers=`echo "$3" | sed 's/^[xvt]//'` ;;
+ esac
;;
hp*) osname=hp_osf1 ;;
mips) osname=mips_osf1 ;;
set usemultiplicity
eval $setvar
-: determine where manual pages are on this system
-echo " "
-case "$sysman" in
-'')
- syspath='/usr/man/man1 /usr/man/mann /usr/man/manl /usr/man/local/man1'
- syspath="$syspath /usr/man/u_man/man1 /usr/share/man/man1"
- syspath="$syspath /usr/catman/u_man/man1 /usr/man/l_man/man1"
- syspath="$syspath /usr/local/man/u_man/man1 /usr/local/man/l_man/man1"
- syspath="$syspath /usr/man/man.L /local/man/man1 /usr/local/man/man1"
- sysman=`./loc . /usr/man/man1 $syspath`
- ;;
-esac
-if $test -d "$sysman"; then
- echo "System manual is in $sysman." >&4
-else
- echo "Could not find manual pages in source form." >&4
-fi
-
-: see what memory models we can support
-case "$models" in
-'')
- $cat >pdp11.c <<'EOP'
-int main() {
-#ifdef pdp11
- exit(0);
-#else
- exit(1);
-#endif
-}
-EOP
- case "$cc" in
- '') modelcc="$cc" ;;
- *) modelcc="cc" ;;
- esac
- ( $modelcc -o pdp11 pdp11.c ) >/dev/null 2>&1
- if $test -f pdp11 && ./pdp11 2>/dev/null; then
- dflt='unsplit split'
- else
- tans=`./loc . X /lib/small /lib/large /usr/lib/small /usr/lib/large /lib/medium /usr/lib/medium /lib/huge`
- case "$tans" in
- X) dflt='none';;
- *) if $test -d /lib/small || $test -d /usr/lib/small; then
- dflt='small'
- else
- dflt=''
- fi
- if $test -d /lib/medium || $test -d /usr/lib/medium; then
- dflt="$dflt medium"
- fi
- if $test -d /lib/large || $test -d /usr/lib/large; then
- dflt="$dflt large"
- fi
- if $test -d /lib/huge || $test -d /usr/lib/huge; then
- dflt="$dflt huge"
- fi
- esac
- fi;;
-*) dflt="$models";;
-esac
-$cat <<EOM
-
-Some systems have different model sizes. On most systems they are called
-small, medium, large, and huge. On the PDP11 they are called unsplit and
-split. If your system doesn't support different memory models, say "none".
-If you wish to force everything to one memory model, say "none" here and
-put the appropriate flags later when it asks you for other cc and ld flags.
-Venix systems may wish to put "none" and let the compiler figure things out.
-(In the following question multiple model names should be space separated.)
-
-The default for most systems is "none".
-
-EOM
-rp="Which memory models are supported?"
-. ./myread
-models="$ans"
-
-case "$models" in
-none)
- small=''
- medium=''
- large=''
- huge=''
- unsplit=''
- split=''
- ;;
-*split)
- case "$split" in
- '') if $contains '\-i' $sysman/ld.1 >/dev/null 2>&1 || \
- $contains '\-i' $sysman/cc.1 >/dev/null 2>&1; then
- dflt='-i'
- else
- dflt='none'
- fi;;
- *) dflt="$split";;
- esac
- rp="What flag indicates separate I and D space?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';;
- esac
- split="$tans"
- unsplit='';;
-*large*|*small*|*medium*|*huge*)
- case "$models" in
- *large*)
- case "$large" in
- '') dflt='-Ml';;
- *) dflt="$large";;
- esac
- rp="What flag indicates large model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- large="$tans";;
- *) large='';;
- esac
- case "$models" in
- *huge*) case "$huge" in
- '') dflt='-Mh';;
- *) dflt="$huge";;
- esac
- rp="What flag indicates huge model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- huge="$tans";;
- *) huge="$large";;
- esac
- case "$models" in
- *medium*) case "$medium" in
- '') dflt='-Mm';;
- *) dflt="$medium";;
- esac
- rp="What flag indicates medium model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- medium="$tans";;
- *) medium="$large";;
- esac
- case "$models" in
- *small*) case "$small" in
- '') dflt='none';;
- *) dflt="$small";;
- esac
- rp="What flag indicates small model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- small="$tans";;
- *) small='';;
- esac
- ;;
-*)
- echo "Unrecognized memory models--you may have to edit Makefile.SH" >&4
- ;;
-esac
-$rm -f pdp11.* pdp11
-
: make some quick guesses about what we are up against
echo " "
$echo $n "Hmm... $c"
;;
esac
: Detect OS2. The p_ variable is set above in the Head.U unit.
+: Note that this also -- wrongly -- detects e.g. dos-djgpp, which also uses
+: semicolon as a patch separator
case "$p_" in
:) ;;
*)
$cat <<'EOI'
I have the feeling something is not exactly right, however...don't tell me...
lemme think...does HAL ring a bell?...no, of course, you're only running OS/2!
+(Or you may be running DOS with DJGPP.)
EOI
echo exit 0 >os2
;;
$eunicefix bsd usg v7 osf1 eunice xenix venix os2
$rm -f foo
-: see if we need a special compiler
-echo " "
-if ./usg; then
- case "$cc" in
- '') case "$Mcc" in
- /*) dflt='Mcc';;
- *) case "$large" in
- -M*) dflt='cc';;
- *) if $contains '\-M' $sysman/cc.1 >/dev/null 2>&1 ; then
- if $contains '\-M' $sysman/cpp.1 >/dev/null 2>&1; then
- dflt='cc'
- else
- dflt='cc -M'
- fi
- else
- dflt='cc'
- fi;;
- esac;;
- esac;;
- *) dflt="$cc";;
- esac
- case "$dflt" in
- *M*) $cat <<'EOM'
-On some older systems the default C compiler will not resolve multiple global
-references that happen to have the same name. On some such systems the "Mcc"
-command may be used to force these to be resolved. On other systems a "cc -M"
-command is required. (Note that the -M flag on other systems indicates a
-memory model to use!) If you have the Gnu C compiler, you might wish to use
-that instead.
-
-EOM
- ;;
- esac
- rp="Use which C compiler?"
- . ./myread
- cc="$ans"
-else
- case "$cc" in
- '') dflt=cc;;
- *) dflt="$cc";;
- esac
- rp="Use which C compiler?"
- . ./myread
- cc="$ans"
-fi
+case "$cc" in
+'') dflt=cc;;
+*) dflt="$cc";;
+esac
+rp="Use which C compiler?"
+. ./myread
+cc="$ans"
: Look for a hint-file generated 'call-back-unit'. Now that the
: user has specified the compiler, we may need to set or change some
: other defaults.
if $test -f cc.cbu; then
. ./cc.cbu
fi
-: Quick sanity check, we will do a fuller one later when we know
-: the various flags and libs
-$rm -f try try.*
-$cat >try.c <<EOM
-int main(int argc, char *argv[]) {
- return 0;
-}
-EOM
-if $cc -o try try.c; then
- :
-else
- echo "Uh-oh, the C compiler '$cc' doesn't seem to be working..." >&4
- despair=yes
- trygcc=yes
- case "$cc" in
- *gcc) trygcc=no ;;
- esac
- case "`$cc -v 2>&1`" in
- *gcc*) trygcc=no ;;
- esac
- if $test X"$trygcc" = Xyes; then
- if gcc -o try try.c; then
- echo " "
- echo "You seem to have a working gcc, though." >&4
- rp="Do you want to use it?"
- dflt=y
- . ./myread
- case "$ans" in
- [yY]*) cc=gcc; despair=no ;;
- esac
- fi
- fi
- if $test X"$despair" = Xyes; then
- echo "You need to find a working C compiler." >&4
- echo "I cannot continue any further, aborting." >&4
- exit 1
- fi
-fi
-$rm -f try try.*
-
+. ./checkcc
echo " "
echo "Checking for GNU cc in disguise and/or its version number..." >&4
case "$gccversion" in
'') echo "You are not using GNU cc." ;;
*) echo "You are using GNU cc $gccversion."
+ ccname=gcc
;;
esac
else
case "$gccversion" in
1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
esac
+case "$gccversion" in
+'') gccosandvers='' ;;
+*) gccshortvers=`echo "$gccversion"|sed 's/ .*//'`
+ gccosandvers=`$cc -v 2>&1|grep '/specs$'|sed "s!.*/[^-/]*-[^-/]*-\([^-/]*\)/$gccshortvers/specs!\1!"`
+ gccshortvers=''
+ case "$gccosandvers" in
+ $osname) gccosandvers='' ;; # linux gccs seem to have no linux osvers, grr
+ $osname$osvers) ;; # looking good
+ $osname*) cat <<EOM >&4
+
+*** WHOA THERE!!! ***
+
+ Your gcc has not been compiled for the exact release of
+ your operating system ($gccosandvers versus $osname$osvers).
+
+ In general it is a good idea to keep gcc synchronized with
+ the operating system because otherwise serious problems
+ may ensue when trying to compile software, like Perl.
+
+ I'm trying to be optimistic here, though, and will continue.
+ If later during the configuration and build icky compilation
+ problems appear (headerfile conflicts being the most common
+ manifestation), I suggest reinstalling the gcc to match
+ your operating system release.
+
+EOM
+ ;;
+ *) gccosandvers='' ;; # failed to parse, better be silent
+ esac
+ ;;
+esac
+case "$ccname" in
+'') ccname="$cc" ;;
+esac
: see how we invoke the C preprocessor
echo " "
if $test -d $thisincl; then
if $test x$thisincl != x$usrinc; then
case "$dflt" in
- *$thisincl*);;
- *) dflt="$dflt -I$thisincl";;
+ *" -I$thisincl "*);;
+ *) dflt="$dflt -I$thisincl ";;
esac
fi
fi
case "$dflt" in
''|' ') dflt=none;;
esac
+
$cat <<EOH
Your C compiler may want other flags. For this question you should include
;;
esac
-: determine the architecture name
echo " "
-if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
- tarch=`arch`"-$osname"
-elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
- if uname -m > tmparch 2>&1 ; then
- tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
- -e 's/$/'"-$osname/" tmparch`
- else
- tarch="$osname"
- fi
- $rm -f tmparch
+echo "Checking for GNU C Library..." >&4
+cat >gnulibc.c <<EOM
+#include <stdio.h>
+int main()
+{
+#ifdef __GLIBC__
+ exit(0);
+#else
+ exit(1);
+#endif
+}
+EOM
+set gnulibc
+if eval $compile_ok && ./gnulibc; then
+ val="$define"
+ echo "You are using the GNU C Library"
else
- tarch="$osname"
+ val="$undef"
+ echo "You are not using the GNU C Library"
fi
-case "$myarchname" in
-''|"$tarch") ;;
+$rm -f gnulibc*
+set d_gnulibc
+eval $setvar
+
+: see if nm is to be used to determine whether a symbol is defined or not
+case "$usenm" in
+'')
+ dflt=''
+ case "$d_gnulibc" in
+ "$define")
+ echo " "
+ echo "nm probably won't work on the GNU C Library." >&4
+ dflt=n
+ ;;
+ esac
+ case "$dflt" in
+ '')
+ if $test "$osname" = aix -a ! -f /lib/syscalls.exp; then
+ echo " "
+ echo "Whoops! This is an AIX system without /lib/syscalls.exp!" >&4
+ echo "'nm' won't be sufficient on this sytem." >&4
+ dflt=n
+ fi
+ ;;
+ esac
+ case "$dflt" in
+ '') dflt=`$egrep 'inlibc|csym' $rsrc/Configure | wc -l 2>/dev/null`
+ if $test $dflt -gt 20; then
+ dflt=y
+ else
+ dflt=n
+ fi
+ ;;
+ esac
+ ;;
*)
- echo "(Your architecture name used to be $myarchname.)"
- archname=''
+ case "$usenm" in
+ true|$define) dflt=y;;
+ *) dflt=n;;
+ esac
;;
esac
-myarchname="$tarch"
-case "$archname" in
-'') dflt="$tarch";;
-*) dflt="$archname";;
-esac
-rp='What is your architecture name'
+$cat <<EOM
+
+I can use $nm to extract the symbols from your C libraries. This
+is a time consuming task which may generate huge output on the disk (up
+to 3 megabytes) but that should make the symbols extraction faster. The
+alternative is to skip the 'nm' extraction part and to compile a small
+test program instead to determine whether each symbol is present. If
+you have a fast C compiler and/or if your 'nm' output cannot be parsed,
+this may be the best solution.
+
+You probably shouldn't let me use 'nm' if you are using the GNU C Library.
+
+EOM
+rp="Shall I use $nm to extract C symbols from the libraries?"
. ./myread
-archname="$ans"
-case "$usethreads" in
-$define)
- echo "Threads selected." >&4
- case "$archname" in
- *-thread*) echo "...and architecture name already has -thread." >&4
- ;;
- *) archname="$archname-thread"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
+case "$ans" in
+[Nn]*) usenm=false;;
+*) usenm=true;;
esac
-case "$usemultiplicity" in
-$define)
- echo "Multiplicity selected." >&4
- case "$archname" in
- *-multi*) echo "...and architecture name already has -multi." >&4
- ;;
- *) archname="$archname-multi"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
+
+runnm=$usenm
+case "$reuseval" in
+true) runnm=false;;
esac
-case "$use64bitint" in
-$define)
- case "$archname64" in
- '')
- ;;
- *)
- case "$archname" in
- *-$archname64*) echo "...and architecture name already has $archname64." >&4
- ;;
- *) archname="$archname-$archname64"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
+
+: nm options which may be necessary
+case "$nm_opt" in
+'') if $test -f /mach_boot; then
+ nm_opt='' # Mach
+ elif $test -d /usr/ccs/lib; then
+ nm_opt='-p' # Solaris (and SunOS?)
+ elif $test -f /dgux; then
+ nm_opt='-p' # DG-UX
+ elif $test -f /lib64/rld; then
+ nm_opt='-p' # 64-bit Irix
+ else
+ nm_opt=''
+ fi;;
+esac
+
+: nm options which may be necessary for shared libraries but illegal
+: for archive libraries. Thank you, Linux.
+case "$nm_so_opt" in
+'') case "$myuname" in
+ *linux*)
+ if $nm --help | $grep 'dynamic' > /dev/null 2>&1; then
+ nm_so_opt='--dynamic'
+ fi
;;
esac
+ ;;
esac
-: determine root of directory hierarchy where package will be installed.
-case "$prefix" in
-'')
- dflt=`./loc . /usr/local /usr/local /local /opt /usr`
- ;;
-*)
- dflt="$prefix"
+case "$runnm" in
+true)
+: get list of predefined functions in a handy place
+echo " "
+case "$libc" in
+'') libc=unknown
+ case "$libs" in
+ *-lc_s*) libc=`./loc libc_s$_a $libc $libpth`
+ esac
;;
esac
-$cat <<EOM
-
-By default, $package will be installed in $dflt/bin, manual pages
-under $dflt/man, etc..., i.e. with $dflt as prefix for all
-installation directories. Typically this is something like /usr/local.
-If you wish to have binaries under /usr/bin but other parts of the
-installation under /usr/local, that's ok: you will be prompted
-separately for each of the installation directories, the prefix being
-only used to set the defaults.
-
-EOM
-fn=d~
-rp='Installation prefix to use?'
-. ./getfile
-oldprefix=''
-case "$prefix" in
+libnames='';
+case "$libs" in
'') ;;
-*)
- case "$ans" in
- "$prefix") ;;
- *) oldprefix="$prefix";;
+*) for thislib in $libs; do
+ case "$thislib" in
+ -lc|-lc_s)
+ : Handle C library specially below.
+ ;;
+ -l*)
+ thislib=`echo $thislib | $sed -e 's/^-l//'`
+ if try=`./loc lib$thislib.$so.'*' X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib.$so X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib$_a X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc $thislib$_a X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc $thislib X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc Slib$thislib$_a X $xlibpth`; $test -f "$try"; then
+ :
+ else
+ try=''
+ fi
+ libnames="$libnames $try"
+ ;;
+ *) libnames="$libnames $thislib" ;;
esac
+ done
;;
esac
-prefix="$ans"
-prefixexp="$ansexp"
-
-: is AFS running?
-echo " "
-case "$afs" in
-$define|true) afs=true ;;
-$undef|false) afs=false ;;
-*) if test -d /afs; then
- afs=true
- else
- afs=false
- fi
+xxx=normal
+case "$libc" in
+unknown)
+ set /lib/libc.$so
+ for xxx in $libpth; do
+ $test -r $1 || set $xxx/libc.$so
+ : The messy sed command sorts on library version numbers.
+ $test -r $1 || \
+ set `echo blurfl; echo $xxx/libc.$so.[0-9]* | \
+ tr ' ' $trnl | egrep -v '\.[A-Za-z]*$' | $sed -e '
+ h
+ s/[0-9][0-9]*/0000&/g
+ s/0*\([0-9][0-9][0-9][0-9][0-9]\)/\1/g
+ G
+ s/\n/ /' | \
+ sort | $sed -e 's/^.* //'`
+ eval set \$$#
+ done
+ $test -r $1 || set /usr/ccs/lib/libc.$so
+ $test -r $1 || set /lib/libsys_s$_a
+ ;;
+*)
+ set blurfl
;;
esac
-if $afs; then
- echo "AFS may be running... I'll be extra cautious then..." >&4
+if $test -r "$1"; then
+ echo "Your (shared) C library seems to be in $1."
+ libc="$1"
+elif $test -r /lib/libc && $test -r /lib/clib; then
+ echo "Your C library seems to be in both /lib/clib and /lib/libc."
+ xxx=apollo
+ libc='/lib/clib /lib/libc'
+ if $test -r /lib/syslib; then
+ echo "(Your math library is in /lib/syslib.)"
+ libc="$libc /lib/syslib"
+ fi
+elif $test -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
+ echo "Your C library seems to be in $libc, as you said before."
+elif $test -r $incpath/usr/lib/libc$_a; then
+ libc=$incpath/usr/lib/libc$_a;
+ echo "Your C library seems to be in $libc. That's fine."
+elif $test -r /lib/libc$_a; then
+ libc=/lib/libc$_a;
+ echo "Your C library seems to be in $libc. You're normal."
else
- echo "AFS does not seem to be running..." >&4
+ if tans=`./loc libc$_a blurfl/dyick $libpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc libc blurfl/dyick $libpth`; $test -r "$tans"; then
+ libnames="$libnames "`./loc clib blurfl/dyick $libpth`
+ elif tans=`./loc clib blurfl/dyick $libpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc Slibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc Mlibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
+ :
+ else
+ tans=`./loc Llibc$_a blurfl/dyick $xlibpth`
+ fi
+ if $test -r "$tans"; then
+ echo "Your C library seems to be in $tans, of all places."
+ libc=$tans
+ else
+ libc='blurfl'
+ fi
fi
+if $test $xxx = apollo -o -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
+ dflt="$libc"
+ cat <<EOM
-: determine installation prefix for where package is to be installed.
-if $afs; then
-$cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-files will reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
+If the guess above is wrong (which it might be if you're using a strange
+compiler, or your machine supports multiple models), you can override it here.
EOM
- case "$installprefix" in
- '') dflt=`echo $prefix | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installprefix";;
- esac
else
-$cat <<EOM
+ dflt=''
+ echo $libpth | tr ' ' $trnl | sort | uniq > libpath
+ cat >&4 <<EOM
+I can't seem to find your C library. I've looked in the following places:
-In some special cases, particularly when building $package for distribution,
-it is convenient to distinguish between the directory in which files should
-be installed from the directory ($prefix) in which they
-will eventually reside. For most users, these two directories are the same.
+EOM
+ $sed 's/^/ /' libpath
+ cat <<EOM
+
+None of these seems to contain your C library. I need to get its name...
EOM
- case "$installprefix" in
- '') dflt=$prefix ;;
- *) dflt=$installprefix;;
- esac
fi
-fn=d~
-rp='What installation prefix should I use for installing files?'
+fn=f
+rp='Where is your C library?'
. ./getfile
-installprefix="$ans"
-installprefixexp="$ansexp"
+libc="$ans"
-: set the prefixit variable, to compute a suitable default value
-prefixit='case "$3" in
-""|none)
- case "$oldprefix" in
- "") eval "$1=\"\$$2\"";;
- *)
- case "$3" in
- "") eval "$1=";;
- none)
- eval "tp=\"\$$2\"";
- case "$tp" in
- ""|" ") eval "$1=\"\$$2\"";;
- *) eval "$1=";;
- esac;;
- esac;;
- esac;;
-*)
- eval "tp=\"$oldprefix-\$$2-\""; eval "tp=\"$tp\"";
- case "$tp" in
+echo " "
+echo $libc $libnames | tr ' ' $trnl | sort | uniq > libnames
+set X `cat libnames`
+shift
+xxx=files
+case $# in 1) xxx=file; esac
+echo "Extracting names from the following $xxx for later perusal:" >&4
+echo " "
+$sed 's/^/ /' libnames >&4
+echo " "
+$echo $n "This may take a while...$c" >&4
+
+for file in $*; do
+ case $file in
+ *$so*) $nm $nm_so_opt $nm_opt $file 2>/dev/null;;
+ *) $nm $nm_opt $file 2>/dev/null;;
+ esac
+done >libc.tmp
+
+$echo $n ".$c"
+$grep fprintf libc.tmp > libc.ptf
+xscan='eval "<libc.ptf $com >libc.list"; $echo $n ".$c" >&4'
+xrun='eval "<libc.tmp $com >libc.list"; echo "done" >&4'
+xxx='[ADTSIW]'
+if com="$sed -n -e 's/__IO//' -e 's/^.* $xxx *_[_.]*//p' -e 's/^.* $xxx *//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^__*//' -e 's/^\([a-zA-Z_0-9$]*\).*xtern.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e '/|UNDEF/d' -e '/FUNC..GL/s/^.*|__*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.* D __*//p' -e 's/^.* D //p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^_//' -e 's/^\([a-zA-Z_0-9]*\).*xtern.*text.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$grep '|' | $sed -n -e '/|COMMON/d' -e '/|DATA/d' \
+ -e '/ file/d' -e 's/^\([^ ]*\).*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p' -e 's/^.*|FUNC |WEAK .*|//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^__//' -e '/|Undef/d' -e '/|Proc/s/ .*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|Proc .*|Text *| *//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e '/Def. Text/s/.* \([^ ]*\)\$/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^[-0-9a-f ]*_\(.*\)=.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/.*\.text n\ \ \ \.//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="sed -n -e 's/^__.*//' -e 's/[ ]*D[ ]*[0-9]*.*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+else
+ $nm -p $* 2>/dev/null >libc.tmp
+ $grep fprintf libc.tmp > libc.ptf
+ if com="$sed -n -e 's/^.* [ADTSIW] *_[_.]*//p' -e 's/^.* [ADTSIW] //p'";\
+ eval $xscan; $contains '^fprintf$' libc.list >/dev/null 2>&1
+ then
+ nm_opt='-p'
+ eval $xrun
+ else
+ echo " "
+ echo "$nm didn't seem to work right. Trying $ar instead..." >&4
+ com=''
+ if $ar t $libc > libc.tmp && $contains '^fprintf$' libc.tmp >/dev/null 2>&1; then
+ for thisname in $libnames $libc; do
+ $ar t $thisname >>libc.tmp
+ done
+ $sed -e "s/\\$_o\$//" < libc.tmp > libc.list
+ echo "Ok." >&4
+ elif test "X$osname" = "Xos2" && $ar tv $libc > libc.tmp; then
+ # Repeat libc to extract forwarders to DLL entries too
+ for thisname in $libnames $libc; do
+ $ar tv $thisname >>libc.tmp
+ # Revision 50 of EMX has bug in $ar.
+ # it will not extract forwarders to DLL entries
+ # Use emximp which will extract exactly them.
+ emximp -o tmp.imp $thisname \
+ 2>/dev/null && \
+ $sed -e 's/^\([_a-zA-Z0-9]*\) .*$/\1/p' \
+ < tmp.imp >>libc.tmp
+ $rm tmp.imp
+ done
+ $sed -e "s/\\$_o\$//" -e 's/^ \+//' < libc.tmp > libc.list
+ echo "Ok." >&4
+ else
+ echo "$ar didn't seem to work right." >&4
+ echo "Maybe this is a Cray...trying bld instead..." >&4
+ if bld t $libc | $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" > libc.list
+ then
+ for thisname in $libnames; do
+ bld t $libnames | \
+ $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" >>libc.list
+ $ar t $thisname >>libc.tmp
+ done
+ echo "Ok." >&4
+ else
+ echo "That didn't work either. Giving up." >&4
+ exit 1
+ fi
+ fi
+ fi
+fi
+nm_extract="$com"
+if $test -f /lib/syscalls.exp; then
+ echo " "
+ echo "Also extracting names from /lib/syscalls.exp for good ole AIX..." >&4
+ $sed -n 's/^\([^ ]*\)[ ]*syscall[0-9]*$/\1/p' /lib/syscalls.exp >>libc.list
+fi
+;;
+esac
+$rm -f libnames libpath
+
+: is a C symbol defined?
+csym='tlook=$1;
+case "$3" in
+-v) tf=libc.tmp; tc=""; tdc="";;
+-a) tf=libc.tmp; tc="[0]"; tdc="[]";;
+*) tlook="^$1\$"; tf=libc.list; tc="()"; tdc="()";;
+esac;
+tx=yes;
+case "$reuseval-$4" in
+true-) ;;
+true-*) tx=no; eval "tval=\$$4"; case "$tval" in "") tx=yes;; esac;;
+esac;
+case "$tx" in
+yes)
+ case "$runnm" in
+ true)
+ if $contains $tlook $tf >/dev/null 2>&1;
+ then tval=true;
+ else tval=false;
+ fi;;
+ *)
+ echo "int main() { extern short $1$tdc; printf(\"%hd\", $1$tc); }" > t.c;
+ if $cc $optimize $ccflags $ldflags -o t t.c $libs >/dev/null 2>&1;
+ then tval=true;
+ else tval=false;
+ fi;
+ $rm -f t t.c;;
+ esac;;
+*)
+ case "$tval" in
+ $define) tval=true;;
+ *) tval=false;;
+ esac;;
+esac;
+eval "$2=$tval"'
+
+: define an is-in-libc? function
+inlibc='echo " "; td=$define; tu=$undef;
+sym=$1; var=$2; eval "was=\$$2";
+tx=yes;
+case "$reuseval$was" in
+true) ;;
+true*) tx=no;;
+esac;
+case "$tx" in
+yes)
+ set $sym tres -f;
+ eval $csym;
+ case "$tres" in
+ true)
+ echo "$sym() found." >&4;
+ case "$was" in $undef) . ./whoa; esac; eval "$var=\$td";;
+ *)
+ echo "$sym() NOT found." >&4;
+ case "$was" in $define) . ./whoa; esac; eval "$var=\$tu";;
+ esac;;
+*)
+ case "$was" in
+ $define) echo "$sym() found." >&4;;
+ *) echo "$sym() NOT found." >&4;;
+ esac;;
+esac'
+
+: see if sqrtl exists
+set sqrtl d_sqrtl
+eval $inlibc
+
+case "$ccflags" in
+*-DUSE_LONG_DOUBLE*|*-DUSE_MORE_BITS*) uselongdouble="$define" ;;
+esac
+
+case "$uselongdouble" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+cat <<EOM
+
+Perl can be built to take advantage of long doubles which
+(if available) may give more accuracy and range for floating point numbers.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Try to use long doubles if available?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set uselongdouble
+eval $setvar
+
+case "$uselongdouble" in
+true|[yY]*) uselongdouble="$define" ;;
+esac
+
+case "$uselongdouble" in
+$define)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that long doubles should be used,
+: we may need to set or change some other defaults.
+ if $test -f uselongdouble.cbu; then
+ echo "Your platform has some specific hints for long doubles, using them..."
+ . ./uselongdouble.cbu
+ else
+ $cat <<EOM
+(Your platform doesn't have any specific hints for long doubles.)
+EOM
+ fi
+ ;;
+esac
+
+case "$uselongdouble:$d_sqrtl" in
+$define:$undef)
+ $cat <<EOM >&4
+
+*** You requested the use of long doubles but you do not seem to have
+*** the mathematic functions for long doubles. I'm disabling the use
+*** of long doubles.
+
+EOM
+ uselongdouble=$undef
+ ;;
+esac
+
+: check for length of double
+echo " "
+case "$doublesize" in
+'')
+ echo "Checking to see how big your double precision numbers are..." >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", (int)sizeof(double));
+ exit(0);
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ doublesize=`./try`
+ echo "Your double is $doublesize bytes long."
+ else
+ dflt='8'
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of a double precision number (in bytes)?"
+ . ./myread
+ doublesize="$ans"
+ fi
+ ;;
+esac
+$rm -f try.c try
+
+: check for long doubles
+echo " "
+echo "Checking to see if you have long double..." >&4
+echo 'int main() { long double x = 7.0; }' > try.c
+set try
+if eval $compile; then
+ val="$define"
+ echo "You have long double."
+else
+ val="$undef"
+ echo "You do not have long double."
+fi
+$rm try.*
+set d_longdbl
+eval $setvar
+
+: check for length of long double
+case "${d_longdbl}${longdblsize}" in
+$define)
+ echo " "
+ echo "Checking to see how big your long doubles are..." >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", sizeof(long double));
+}
+EOCP
+ set try
+ set try
+ if eval $compile; then
+ longdblsize=`./try$exe_ext`
+ echo "Your long doubles are $longdblsize bytes long."
+ else
+ dflt='8'
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)" >&4
+ rp="What is the size of a long double (in bytes)?"
+ . ./myread
+ longdblsize="$ans"
+ fi
+ if $test "X$doublesize" = "X$longdblsize"; then
+ echo "(That isn't any different from an ordinary double.)"
+ fi
+ ;;
+esac
+$rm -f try.* try
+
+: determine the architecture name
+echo " "
+if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
+ tarch=`arch`"-$osname"
+elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
+ if uname -m > tmparch 2>&1 ; then
+ tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
+ -e 's/$/'"-$osname/" tmparch`
+ else
+ tarch="$osname"
+ fi
+ $rm -f tmparch
+else
+ tarch="$osname"
+fi
+case "$myarchname" in
+''|"$tarch") ;;
+*)
+ echo "(Your architecture name used to be $myarchname.)"
+ archname=''
+ ;;
+esac
+myarchname="$tarch"
+case "$archname" in
+'') dflt="$tarch";;
+*) dflt="$archname";;
+esac
+rp='What is your architecture name'
+. ./myread
+archname="$ans"
+case "$usethreads" in
+$define)
+ echo "Threads selected." >&4
+ case "$archname" in
+ *-thread*) echo "...and architecture name already has -thread." >&4
+ ;;
+ *) archname="$archname-thread"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+esac
+case "$usemultiplicity" in
+$define)
+ echo "Multiplicity selected." >&4
+ case "$archname" in
+ *-multi*) echo "...and architecture name already has -multi." >&4
+ ;;
+ *) archname="$archname-multi"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+esac
+case "$use64bitint$use64bitall" in
+*"$define"*)
+ case "$archname64" in
+ '')
+ echo "This architecture is naturally 64-bit, not changing architecture name." >&4
+ ;;
+ *)
+ case "$use64bitint" in
+ "$define") echo "64 bit integers selected." >&4 ;;
+ esac
+ case "$use64bitall" in
+ "$define") echo "Maximal 64 bitness selected." >&4 ;;
+ esac
+ case "$archname" in
+ *-$archname64*) echo "...and architecture name already has $archname64." >&4
+ ;;
+ *) archname="$archname-$archname64"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+ esac
+esac
+case "$uselongdouble" in
+$define)
+ echo "Long doubles selected." >&4
+ case "$longdblsize" in
+ $doublesize)
+ "...but long doubles are equal to doubles, not changing architecture name." >&4
+ ;;
+ *)
+ case "$archname" in
+ *-ld*) echo "...and architecture name already has -ld." >&4
+ ;;
+ *) archname="$archname-ld"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
+: determine root of directory hierarchy where package will be installed.
+case "$prefix" in
+'')
+ dflt=`./loc . /usr/local /usr/local /local /opt /usr`
+ ;;
+*)
+ dflt="$prefix"
+ ;;
+esac
+$cat <<EOM
+
+By default, $package will be installed in $dflt/bin, manual pages
+under $dflt/man, etc..., i.e. with $dflt as prefix for all
+installation directories. Typically this is something like /usr/local.
+If you wish to have binaries under /usr/bin but other parts of the
+installation under /usr/local, that's ok: you will be prompted
+separately for each of the installation directories, the prefix being
+only used to set the defaults.
+
+EOM
+fn=d~
+rp='Installation prefix to use?'
+. ./getfile
+oldprefix=''
+case "$prefix" in
+'') ;;
+*)
+ case "$ans" in
+ "$prefix") ;;
+ *) oldprefix="$prefix";;
+ esac
+ ;;
+esac
+prefix="$ans"
+prefixexp="$ansexp"
+
+: is AFS running?
+echo " "
+case "$afs" in
+$define|true) afs=true ;;
+$undef|false) afs=false ;;
+*) if test -d /afs; then
+ afs=true
+ else
+ afs=false
+ fi
+ ;;
+esac
+if $afs; then
+ echo "AFS may be running... I'll be extra cautious then..." >&4
+else
+ echo "AFS does not seem to be running..." >&4
+fi
+
+: determine installation prefix for where package is to be installed.
+if $afs; then
+$cat <<EOM
+
+Since you are running AFS, I need to distinguish the directory in which
+files will reside from the directory in which they are installed (and from
+which they are presumably copied to the former directory by occult means).
+
+EOM
+ case "$installprefix" in
+ '') dflt=`echo $prefix | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installprefix";;
+ esac
+else
+$cat <<EOM
+
+In some special cases, particularly when building $package for distribution,
+it is convenient to distinguish between the directory in which files should
+be installed from the directory ($prefix) in which they
+will eventually reside. For most users, these two directories are the same.
+
+EOM
+ case "$installprefix" in
+ '') dflt=$prefix ;;
+ *) dflt=$installprefix;;
+ esac
+fi
+fn=d~
+rp='What installation prefix should I use for installing files?'
+. ./getfile
+installprefix="$ans"
+installprefixexp="$ansexp"
+
+: set the prefixit variable, to compute a suitable default value
+prefixit='case "$3" in
+""|none)
+ case "$oldprefix" in
+ "") eval "$1=\"\$$2\"";;
+ *)
+ case "$3" in
+ "") eval "$1=";;
+ none)
+ eval "tp=\"\$$2\"";
+ case "$tp" in
+ ""|" ") eval "$1=\"\$$2\"";;
+ *) eval "$1=";;
+ esac;;
+ esac;;
+ esac;;
+*)
+ eval "tp=\"$oldprefix-\$$2-\""; eval "tp=\"$tp\"";
+ case "$tp" in
--|/*--|\~*--) eval "$1=\"$prefix/$3\"";;
/*-$oldprefix/*|\~*-$oldprefix/*)
eval "$1=\`echo \$$2 | sed \"s,^$oldprefix,$prefix,\"\`";;
api_version=0
api_subversion=0
fi
-$echo $n "(You have $package revision $revision" $c
-$echo $n " patchlevel $patchlevel" $c
-test 0 -eq "$subversion" || $echo $n " subversion $subversion" $c
-echo ".)"
+$echo "(You have $package version $patchlevel subversion $subversion.)"
case "$osname" in
dos|vms)
: XXX Should be a Configure test for double-dots in filenames.
vendorlib_stem=`echo "$vendorlibexp" | sed "s,/$version$,,"`
: Change installation prefix, if necessary.
if $test X"$prefix" != X"$installprefix"; then
- installvendorlib=`echo $vendorlibexp | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorlib="$vendorlibexp"
-fi
-
-case "$vendorprefix" in
-'') d_vendorarch="$undef"
- vendorarch=''
- vendorarchexp=''
- ;;
-*) d_vendorarch="$define"
- : determine where vendor-supplied architecture-dependent libraries go.
- : vendorlib default is /usr/local/lib/perl5/vendor_perl/$version
- : vendorarch default is /usr/local/lib/perl5/vendor_perl/$version/$archname
- : vendorlib may have an optional trailing /share.
- case "$vendorarch" in
- '') dflt=`echo $vendorlib | $sed 's,/share$,,'`
- dflt="$dflt/$archname"
- ;;
- *) dflt="$vendorarch" ;;
- esac
- fn=d~+
- rp='Pathname for vendor-supplied architecture-dependent files?'
- . ./getfile
- vendorarch="$ans"
- vendorarchexp="$ansexp"
- ;;
-esac
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorarch=`echo $vendorarchexp | sed "s#^$prefix#$installprefix#"`
-else
- installvendorarch="$vendorarchexp"
-fi
-
-: Final catch-all directories to search
-$cat <<EOM
-
-Lastly, you can have perl look in other directories for extensions and
-modules in addition to those already specified.
-These directories will be searched after
- $sitearch
- $sitelib
-EOM
-test X"$vendorlib" != "X" && echo ' ' $vendorlib
-test X"$vendorarch" != "X" && echo ' ' $vendorarch
-echo ' '
-case "$otherlibdirs" in
-''|' ') dflt='none' ;;
-*) dflt="$otherlibdirs" ;;
-esac
-$cat <<EOM
-Enter a colon-separated set of extra paths to include in perl's @INC
-search path, or enter 'none' for no extra paths.
-
-EOM
-
-rp='Colon-separated list of additional directories for perl to search?'
-. ./myread
-case "$ans" in
-' '|''|none) otherlibdirs=' ' ;;
-*) otherlibdirs="$ans" ;;
-esac
-case "$otherlibdirs" in
-' ') val=$undef ;;
-*) val=$define ;;
-esac
-set d_perl_otherlibdirs
-eval $setvar
-
-: Cruising for prototypes
-echo " "
-echo "Checking out function prototypes..." >&4
-$cat >prototype.c <<'EOCP'
-int main(int argc, char *argv[]) {
- exit(0);}
-EOCP
-if $cc $ccflags -c prototype.c >prototype.out 2>&1 ; then
- echo "Your C compiler appears to support function prototypes."
- val="$define"
-else
- echo "Your C compiler doesn't seem to understand function prototypes."
- val="$undef"
-fi
-set prototype
-eval $setvar
-$rm -f prototype*
-
-case "$prototype" in
-"$define") ;;
-*) ansi2knr='ansi2knr'
- echo " "
- cat <<EOM >&4
-
-$me: FATAL ERROR:
-This version of $package can only be compiled by a compiler that
-understands function prototypes. Unfortunately, your C compiler
- $cc $ccflags
-doesn't seem to understand them. Sorry about that.
-
-If GNU cc is available for your system, perhaps you could try that instead.
-
-Eventually, we hope to support building Perl with pre-ANSI compilers.
-If you would like to help in that effort, please contact <perlbug@perl.org>.
-
-Aborting Configure now.
-EOM
- exit 2
- ;;
-esac
-
-: determine where public executables go
-echo " "
-set dflt bin bin
-eval $prefixit
-fn=d~
-rp='Pathname where the public executables will reside?'
-. ./getfile
-if $test "X$ansexp" != "X$binexp"; then
- installbin=''
-fi
-bin="$ans"
-binexp="$ansexp"
-: Change installation prefix, if necessary.
-: XXX Bug? -- ignores Configure -Dinstallprefix setting.
-if $test X"$prefix" != X"$installprefix"; then
- installbin=`echo $binexp | sed "s#^$prefix#$installprefix#"`
+ installvendorlib=`echo $vendorlibexp | $sed "s#^$prefix#$installprefix#"`
else
- installbin="$binexp"
+ installvendorlib="$vendorlibexp"
fi
-: Find perl5.005 or later.
-echo "Looking for a previously installed perl5.005 or later... "
-case "$perl5" in
-'') for tdir in `echo "$binexp:$PATH" | $sed "s/$path_sep/ /g"`; do
- : Check if this perl is recent and can load a simple module
- if $test -x $tdir/perl && $tdir/perl -Mless -e 'use 5.005;' >/dev/null 2>&1; then
- perl5=$tdir/perl
- break;
- elif $test -x $tdir/perl5 && $tdir/perl5 -Mless -e 'use 5.005;' >/dev/null 2>&1; then
- perl5=$tdir/perl
- break;
- fi
- done
+case "$vendorprefix" in
+'') d_vendorarch="$undef"
+ vendorarch=''
+ vendorarchexp=''
;;
-*) perl5="$perl5"
+*) d_vendorarch="$define"
+ : determine where vendor-supplied architecture-dependent libraries go.
+ : vendorlib default is /usr/local/lib/perl5/vendor_perl/$version
+ : vendorarch default is /usr/local/lib/perl5/vendor_perl/$version/$archname
+ : vendorlib may have an optional trailing /share.
+ case "$vendorarch" in
+ '') dflt=`echo $vendorlib | $sed 's,/share$,,'`
+ dflt="$dflt/$archname"
+ ;;
+ *) dflt="$vendorarch" ;;
+ esac
+ fn=d~+
+ rp='Pathname for vendor-supplied architecture-dependent files?'
+ . ./getfile
+ vendorarch="$ans"
+ vendorarchexp="$ansexp"
;;
esac
-case "$perl5" in
-'') echo "None found. That's ok.";;
-*) echo "Using $perl5." ;;
-esac
-
-: Determine list of previous versions to include in @INC
-$cat > getverlist <<EOPL
-#!$perl5 -w
-use File::Basename;
-\$api_versionstring = "$api_versionstring";
-\$version = "$version";
-\$stem = "$sitelib_stem";
-\$archname = "$archname";
-EOPL
- $cat >> getverlist <<'EOPL'
-# Can't have leading @ because metaconfig interprets it as a command!
-;@inc_version_list=();
-# XXX Redo to do opendir/readdir?
-if (-d $stem) {
- chdir($stem);
- ;@candidates = glob("5.*");
-}
-else {
- ;@candidates = ();
-}
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installvendorarch=`echo $vendorarchexp | sed "s#^$prefix#$installprefix#"`
+else
+ installvendorarch="$vendorarchexp"
+fi
-# XXX ToDo: These comparisons must be reworked when two-digit
-# subversions come along, so that 5.7.10 compares as greater than
-# 5.7.3! By that time, hope that 5.6.x is sufficiently
-# widespread that we can use the built-in version vectors rather
-# than reinventing them here. For 5.6.0, however, we must
-# assume this script will likely be run by 5.005_0x. --AD 1/2000.
-foreach $d (@candidates) {
- if ($d lt $version) {
- if ($d ge $api_versionstring) {
- unshift(@inc_version_list, grep { -d } "$d/$archname", $d);
- }
- elsif ($d ge "5.005") {
- unshift(@inc_version_list, grep { -d } $d);
- }
- }
- else {
- # Skip newer version. I.e. don't look in
- # 5.7.0 if we're installing 5.6.1.
- }
-}
+: Final catch-all directories to search
+$cat <<EOM
-if (@inc_version_list) {
- print join(' ', @inc_version_list);
-}
-else {
- # Blank space to preserve value for next Configure run.
- print " ";
-}
-EOPL
-chmod +x getverlist
-case "$inc_version_list" in
-'') if test -x "$perl5"; then
- dflt=`$perl5 getverlist`
- else
- dflt='none'
- fi
- ;;
-$undef) dflt='none' ;;
-*) dflt="$inc_version_list" ;;
-esac
-case "$dflt" in
-''|' ') dflt=none ;;
+Lastly, you can have perl look in other directories for extensions and
+modules in addition to those already specified.
+These directories will be searched after
+ $sitearch
+ $sitelib
+EOM
+test X"$vendorlib" != "X" && echo ' ' $vendorlib
+test X"$vendorarch" != "X" && echo ' ' $vendorarch
+echo ' '
+case "$otherlibdirs" in
+''|' ') dflt='none' ;;
+*) dflt="$otherlibdirs" ;;
esac
-$cat <<'EOM'
-
-In order to ease the process of upgrading, this version of perl
-can be configured to use modules built and installed with earlier
-versions of perl that were installed under $prefix. Specify here
-the list of earlier versions that this version of perl should check.
-If Configure detected no earlier versions of perl installed under
-$prefix, then the list will be empty. Answer 'none' to tell perl
-to not search earlier versions.
+$cat <<EOM
+Enter a colon-separated set of extra paths to include in perl's @INC
+search path, or enter 'none' for no extra paths.
-The default should almost always be sensible, so if you're not sure,
-just accept the default.
EOM
-rp='List of earlier versions to include in @INC?'
+rp='Colon-separated list of additional directories for perl to search?'
. ./myread
case "$ans" in
-[Nn]one|''|' ') inc_version_list=' ' ;;
-*) inc_version_list="$ans" ;;
+' '|''|none) otherlibdirs=' ' ;;
+*) otherlibdirs="$ans" ;;
esac
-case "$inc_version_list" in
-''|' ')
- inc_version_list_init='0';;
-*) inc_version_list_init=`echo $inc_version_list |
- $sed -e 's/^/"/' -e 's/ /","/g' -e 's/$/",0/'`
- ;;
+case "$otherlibdirs" in
+' ') val=$undef ;;
+*) val=$define ;;
esac
-$rm -f getverlist
-
-: determine whether to install perl also as /usr/bin/perl
-
-echo " "
-if $test -d /usr/bin -a "X$installbin" != X/usr/bin; then
- $cat <<EOM
-Many scripts expect perl to be installed as /usr/bin/perl.
-I can install the perl you are about to compile also as /usr/bin/perl
-(in addition to $installbin/perl).
-EOM
- case "$installusrbinperl" in
- "$undef"|[nN]*) dflt='n';;
- *) dflt='y';;
- esac
- rp="Do you want to install perl as /usr/bin/perl?"
- . ./myread
- case "$ans" in
- [yY]*) val="$define";;
- *) val="$undef" ;;
- esac
-else
- val="$undef"
-fi
-set installusrbinperl
+set d_perl_otherlibdirs
eval $setvar
+: Cruising for prototypes
echo " "
-echo "Checking for GNU C Library..." >&4
-cat >gnulibc.c <<EOM
-#include <stdio.h>
-int main()
-{
-#ifdef __GLIBC__
- exit(0);
-#else
- exit(1);
-#endif
-}
-EOM
-set gnulibc
-if eval $compile_ok && ./gnulibc; then
+echo "Checking out function prototypes..." >&4
+$cat >prototype.c <<'EOCP'
+int main(int argc, char *argv[]) {
+ exit(0);}
+EOCP
+if $cc $ccflags -c prototype.c >prototype.out 2>&1 ; then
+ echo "Your C compiler appears to support function prototypes."
val="$define"
- echo "You are using the GNU C Library"
else
+ echo "Your C compiler doesn't seem to understand function prototypes."
val="$undef"
- echo "You are not using the GNU C Library"
fi
-$rm -f gnulibc*
-set d_gnulibc
-eval $setvar
-
-: see if nm is to be used to determine whether a symbol is defined or not
-case "$usenm" in
-'')
- dflt=''
- case "$d_gnulibc" in
- "$define")
- echo " "
- echo "nm probably won't work on the GNU C Library." >&4
- dflt=n
- ;;
- esac
- case "$dflt" in
- '')
- if $test "$osname" = aix -a ! -f /lib/syscalls.exp; then
- echo " "
- echo "Whoops! This is an AIX system without /lib/syscalls.exp!" >&4
- echo "'nm' won't be sufficient on this sytem." >&4
- dflt=n
- fi
- ;;
- esac
- case "$dflt" in
- '') dflt=`$egrep 'inlibc|csym' $rsrc/Configure | wc -l 2>/dev/null`
- if $test $dflt -gt 20; then
- dflt=y
- else
- dflt=n
- fi
- ;;
- esac
- ;;
-*)
- case "$usenm" in
- true|$define) dflt=y;;
- *) dflt=n;;
- esac
- ;;
-esac
-$cat <<EOM
-
-I can use $nm to extract the symbols from your C libraries. This
-is a time consuming task which may generate huge output on the disk (up
-to 3 megabytes) but that should make the symbols extraction faster. The
-alternative is to skip the 'nm' extraction part and to compile a small
-test program instead to determine whether each symbol is present. If
-you have a fast C compiler and/or if your 'nm' output cannot be parsed,
-this may be the best solution.
+set prototype
+eval $setvar
+$rm -f prototype*
-You probably shouldn't let me use 'nm' if you are using the GNU C Library.
+case "$prototype" in
+"$define") ;;
+*) ansi2knr='ansi2knr'
+ echo " "
+ cat <<EOM >&4
-EOM
-rp="Shall I use $nm to extract C symbols from the libraries?"
-. ./myread
-case "$ans" in
-[Nn]*) usenm=false;;
-*) usenm=true;;
-esac
+$me: FATAL ERROR:
+This version of $package can only be compiled by a compiler that
+understands function prototypes. Unfortunately, your C compiler
+ $cc $ccflags
+doesn't seem to understand them. Sorry about that.
-runnm=$usenm
-case "$reuseval" in
-true) runnm=false;;
-esac
+If GNU cc is available for your system, perhaps you could try that instead.
-: nm options which may be necessary
-case "$nm_opt" in
-'') if $test -f /mach_boot; then
- nm_opt='' # Mach
- elif $test -d /usr/ccs/lib; then
- nm_opt='-p' # Solaris (and SunOS?)
- elif $test -f /dgux; then
- nm_opt='-p' # DG-UX
- elif $test -f /lib64/rld; then
- nm_opt='-p' # 64-bit Irix
- else
- nm_opt=''
- fi;;
-esac
+Eventually, we hope to support building Perl with pre-ANSI compilers.
+If you would like to help in that effort, please contact <perlbug@perl.org>.
-: nm options which may be necessary for shared libraries but illegal
-: for archive libraries. Thank you, Linux.
-case "$nm_so_opt" in
-'') case "$myuname" in
- *linux*)
- if $nm --help | $grep 'dynamic' > /dev/null 2>&1; then
- nm_so_opt='--dynamic'
- fi
- ;;
- esac
+Aborting Configure now.
+EOM
+ exit 2
;;
esac
-case "$runnm" in
-true)
-: get list of predefined functions in a handy place
+: determine where public executables go
echo " "
-case "$libc" in
-'') libc=unknown
- case "$libs" in
- *-lc_s*) libc=`./loc libc_s$_a $libc $libpth`
- esac
- ;;
-esac
-libnames='';
-case "$libs" in
-'') ;;
-*) for thislib in $libs; do
- case "$thislib" in
- -lc|-lc_s)
- : Handle C library specially below.
- ;;
- -l*)
- thislib=`echo $thislib | $sed -e 's/^-l//'`
- if try=`./loc lib$thislib.$so.'*' X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib.$so X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib$_a X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc $thislib$_a X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc $thislib X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc Slib$thislib$_a X $xlibpth`; $test -f "$try"; then
- :
- else
- try=''
+set dflt bin bin
+eval $prefixit
+fn=d~
+rp='Pathname where the public executables will reside?'
+. ./getfile
+if $test "X$ansexp" != "X$binexp"; then
+ installbin=''
+fi
+bin="$ans"
+binexp="$ansexp"
+: Change installation prefix, if necessary.
+: XXX Bug? -- ignores Configure -Dinstallprefix setting.
+if $test X"$prefix" != X"$installprefix"; then
+ installbin=`echo $binexp | sed "s#^$prefix#$installprefix#"`
+else
+ installbin="$binexp"
+fi
+
+: Find perl5.005 or later.
+echo "Looking for a previously installed perl5.005 or later... "
+case "$perl5" in
+'') for tdir in `echo "$binexp:$PATH" | $sed "s/$path_sep/ /g"`; do
+ : Check if this perl is recent and can load a simple module
+ if $test -x $tdir/perl && $tdir/perl -Mless -e 'use 5.005;' >/dev/null 2>&1; then
+ perl5=$tdir/perl
+ break;
+ elif $test -x $tdir/perl5 && $tdir/perl5 -Mless -e 'use 5.005;' >/dev/null 2>&1; then
+ perl5=$tdir/perl
+ break;
fi
- libnames="$libnames $try"
- ;;
- *) libnames="$libnames $thislib" ;;
- esac
- done
- ;;
-esac
-xxx=normal
-case "$libc" in
-unknown)
- set /lib/libc.$so
- for xxx in $libpth; do
- $test -r $1 || set $xxx/libc.$so
- : The messy sed command sorts on library version numbers.
- $test -r $1 || \
- set `echo blurfl; echo $xxx/libc.$so.[0-9]* | \
- tr ' ' $trnl | egrep -v '\.[A-Za-z]*$' | $sed -e '
- h
- s/[0-9][0-9]*/0000&/g
- s/0*\([0-9][0-9][0-9][0-9][0-9]\)/\1/g
- G
- s/\n/ /' | \
- sort | $sed -e 's/^.* //'`
- eval set \$$#
done
- $test -r $1 || set /usr/ccs/lib/libc.$so
- $test -r $1 || set /lib/libsys_s$_a
;;
-*)
- set blurfl
+*) perl5="$perl5"
;;
esac
-if $test -r "$1"; then
- echo "Your (shared) C library seems to be in $1."
- libc="$1"
-elif $test -r /lib/libc && $test -r /lib/clib; then
- echo "Your C library seems to be in both /lib/clib and /lib/libc."
- xxx=apollo
- libc='/lib/clib /lib/libc'
- if $test -r /lib/syslib; then
- echo "(Your math library is in /lib/syslib.)"
- libc="$libc /lib/syslib"
- fi
-elif $test -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
- echo "Your C library seems to be in $libc, as you said before."
-elif $test -r $incpath/usr/lib/libc$_a; then
- libc=$incpath/usr/lib/libc$_a;
- echo "Your C library seems to be in $libc. That's fine."
-elif $test -r /lib/libc$_a; then
- libc=/lib/libc$_a;
- echo "Your C library seems to be in $libc. You're normal."
-else
- if tans=`./loc libc$_a blurfl/dyick $libpth`; $test -r "$tans"; then
- :
- elif tans=`./loc libc blurfl/dyick $libpth`; $test -r "$tans"; then
- libnames="$libnames "`./loc clib blurfl/dyick $libpth`
- elif tans=`./loc clib blurfl/dyick $libpth`; $test -r "$tans"; then
- :
- elif tans=`./loc Slibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
- :
- elif tans=`./loc Mlibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
- :
- else
- tans=`./loc Llibc$_a blurfl/dyick $xlibpth`
- fi
- if $test -r "$tans"; then
- echo "Your C library seems to be in $tans, of all places."
- libc=$tans
+case "$perl5" in
+'') echo "None found. That's ok.";;
+*) echo "Using $perl5." ;;
+esac
+
+: Determine list of previous versions to include in @INC
+$cat > getverlist <<EOPL
+#!$perl5 -w
+use File::Basename;
+\$api_versionstring = "$api_versionstring";
+\$version = "$version";
+\$stem = "$sitelib_stem";
+\$archname = "$archname";
+EOPL
+ $cat >> getverlist <<'EOPL'
+# Can't have leading @ because metaconfig interprets it as a command!
+;@inc_version_list=();
+# XXX Redo to do opendir/readdir?
+if (-d $stem) {
+ chdir($stem);
+ ;@candidates = glob("5.*");
+}
+else {
+ ;@candidates = ();
+}
+
+# XXX ToDo: These comparisons must be reworked when two-digit
+# subversions come along, so that 5.7.10 compares as greater than
+# 5.7.3! By that time, hope that 5.6.x is sufficiently
+# widespread that we can use the built-in version vectors rather
+# than reinventing them here. For 5.6.0, however, we must
+# assume this script will likely be run by 5.005_0x. --AD 1/2000.
+foreach $d (@candidates) {
+ if ($d lt $version) {
+ if ($d ge $api_versionstring) {
+ unshift(@inc_version_list, grep { -d } "$d/$archname", $d);
+ }
+ elsif ($d ge "5.005") {
+ unshift(@inc_version_list, grep { -d } $d);
+ }
+ }
+ else {
+ # Skip newer version. I.e. don't look in
+ # 5.7.0 if we're installing 5.6.1.
+ }
+}
+
+if (@inc_version_list) {
+ print join(' ', @inc_version_list);
+}
+else {
+ # Blank space to preserve value for next Configure run.
+ print " ";
+}
+EOPL
+chmod +x getverlist
+case "$inc_version_list" in
+'') if test -x "$perl5"; then
+ dflt=`$perl5 getverlist`
else
- libc='blurfl'
+ dflt='none'
fi
-fi
-if $test $xxx = apollo -o -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
- dflt="$libc"
- cat <<EOM
-
-If the guess above is wrong (which it might be if you're using a strange
-compiler, or your machine supports multiple models), you can override it here.
+ ;;
+$undef) dflt='none' ;;
+*) dflt="$inc_version_list" ;;
+esac
+case "$dflt" in
+''|' ') dflt=none ;;
+esac
+case "$dflt" in
+5.005) case "$bincompat5005" in
+ $define|true|[yY]*) ;;
+ *) dflt=none ;;
+ esac
+ ;;
+esac
+$cat <<'EOM'
-EOM
-else
- dflt=''
- echo $libpth | tr ' ' $trnl | sort | uniq > libpath
- cat >&4 <<EOM
-I can't seem to find your C library. I've looked in the following places:
+In order to ease the process of upgrading, this version of perl
+can be configured to use modules built and installed with earlier
+versions of perl that were installed under $prefix. Specify here
+the list of earlier versions that this version of perl should check.
+If Configure detected no earlier versions of perl installed under
+$prefix, then the list will be empty. Answer 'none' to tell perl
+to not search earlier versions.
+The default should almost always be sensible, so if you're not sure,
+just accept the default.
EOM
- $sed 's/^/ /' libpath
- cat <<EOM
-None of these seems to contain your C library. I need to get its name...
+rp='List of earlier versions to include in @INC?'
+. ./myread
+case "$ans" in
+[Nn]one|''|' ') inc_version_list=' ' ;;
+*) inc_version_list="$ans" ;;
+esac
+case "$inc_version_list" in
+''|' ')
+ inc_version_list_init='0';;
+*) inc_version_list_init=`echo $inc_version_list |
+ $sed -e 's/^/"/' -e 's/ /","/g' -e 's/$/",0/'`
+ ;;
+esac
+$rm -f getverlist
-EOM
-fi
-fn=f
-rp='Where is your C library?'
-. ./getfile
-libc="$ans"
+: determine whether to install the scripts
echo " "
-echo $libc $libnames | tr ' ' $trnl | sort | uniq > libnames
-set X `cat libnames`
-shift
-xxx=files
-case $# in 1) xxx=file; esac
-echo "Extracting names from the following $xxx for later perusal:" >&4
-echo " "
-$sed 's/^/ /' libnames >&4
-echo " "
-$echo $n "This may take a while...$c" >&4
-
-for file in $*; do
- case $file in
- *$so*) $nm $nm_so_opt $nm_opt $file 2>/dev/null;;
- *) $nm $nm_opt $file 2>/dev/null;;
- esac
-done >libc.tmp
+$cat <<EOM
+Do you want to install the various scripts accompanying Perl?
+Usually you do want this.
-$echo $n ".$c"
-$grep fprintf libc.tmp > libc.ptf
-xscan='eval "<libc.ptf $com >libc.list"; $echo $n ".$c" >&4'
-xrun='eval "<libc.tmp $com >libc.list"; echo "done" >&4'
-xxx='[ADTSIW]'
-if com="$sed -n -e 's/__IO//' -e 's/^.* $xxx *_[_.]*//p' -e 's/^.* $xxx *//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^__*//' -e 's/^\([a-zA-Z_0-9$]*\).*xtern.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e '/|UNDEF/d' -e '/FUNC..GL/s/^.*|__*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.* D __*//p' -e 's/^.* D //p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^_//' -e 's/^\([a-zA-Z_0-9]*\).*xtern.*text.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$grep '|' | $sed -n -e '/|COMMON/d' -e '/|DATA/d' \
- -e '/ file/d' -e 's/^\([^ ]*\).*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p' -e 's/^.*|FUNC |WEAK .*|//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^__//' -e '/|Undef/d' -e '/|Proc/s/ .*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|Proc .*|Text *| *//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e '/Def. Text/s/.* \([^ ]*\)\$/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^[-0-9a-f ]*_\(.*\)=.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/.*\.text n\ \ \ \.//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="sed -n -e 's/^__.*//' -e 's/[ ]*D[ ]*[0-9]*.*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-else
- $nm -p $* 2>/dev/null >libc.tmp
- $grep fprintf libc.tmp > libc.ptf
- if com="$sed -n -e 's/^.* [ADTSIW] *_[_.]*//p' -e 's/^.* [ADTSIW] //p'";\
- eval $xscan; $contains '^fprintf$' libc.list >/dev/null 2>&1
- then
- nm_opt='-p'
- eval $xrun
- else
- echo " "
- echo "$nm didn't seem to work right. Trying $ar instead..." >&4
- com=''
- if $ar t $libc > libc.tmp && $contains '^fprintf$' libc.tmp >/dev/null 2>&1; then
- for thisname in $libnames $libc; do
- $ar t $thisname >>libc.tmp
- done
- $sed -e "s/\\$_o\$//" < libc.tmp > libc.list
- echo "Ok." >&4
- elif test "X$osname" = "Xos2" && $ar tv $libc > libc.tmp; then
- # Repeat libc to extract forwarders to DLL entries too
- for thisname in $libnames $libc; do
- $ar tv $thisname >>libc.tmp
- # Revision 50 of EMX has bug in $ar.
- # it will not extract forwarders to DLL entries
- # Use emximp which will extract exactly them.
- emximp -o tmp.imp $thisname \
- 2>/dev/null && \
- $sed -e 's/^\([_a-zA-Z0-9]*\) .*$/\1/p' \
- < tmp.imp >>libc.tmp
- $rm tmp.imp
- done
- $sed -e "s/\\$_o\$//" -e 's/^ \+//' < libc.tmp > libc.list
- echo "Ok." >&4
- else
- echo "$ar didn't seem to work right." >&4
- echo "Maybe this is a Cray...trying bld instead..." >&4
- if bld t $libc | $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" > libc.list
- then
- for thisname in $libnames; do
- bld t $libnames | \
- $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" >>libc.list
- $ar t $thisname >>libc.tmp
- done
- echo "Ok." >&4
- else
- echo "That didn't work either. Giving up." >&4
- exit 1
- fi
- fi
- fi
-fi
-nm_extract="$com"
-if $test -f /lib/syscalls.exp; then
- echo " "
- echo "Also extracting names from /lib/syscalls.exp for good ole AIX..." >&4
- $sed -n 's/^\([^ ]*\)[ ]*syscall[0-9]*$/\1/p' /lib/syscalls.exp >>libc.list
-fi
-;;
+EOM
+case "$installscripts" in
+"$undef"|[nN]*) dflt='n';;
+*) dflt='y';;
esac
-$rm -f libnames libpath
-
-: see if dld is available
-set dld.h i_dld
-eval $inhdr
+rp="Do you want to install the scripts?"
+. ./myread
+case "$ans" in
+[yY]*) val="$define";;
+*) val="$undef" ;;
+esac
+set installscripts
+eval $setvar
-: is a C symbol defined?
-csym='tlook=$1;
-case "$3" in
--v) tf=libc.tmp; tc=""; tdc="";;
--a) tf=libc.tmp; tc="[0]"; tdc="[]";;
-*) tlook="^$1\$"; tf=libc.list; tc="()"; tdc="()";;
-esac;
-tx=yes;
-case "$reuseval-$4" in
-true-) ;;
-true-*) tx=no; eval "tval=\$$4"; case "$tval" in "") tx=yes;; esac;;
-esac;
-case "$tx" in
-yes)
- case "$runnm" in
- true)
- if $contains $tlook $tf >/dev/null 2>&1;
- then tval=true;
- else tval=false;
- fi;;
- *)
- echo "int main() { extern short $1$tdc; printf(\"%hd\", $1$tc); }" > t.c;
- if $cc $optimize $ccflags $ldflags -o t t.c $libs >/dev/null 2>&1;
- then tval=true;
- else tval=false;
- fi;
- $rm -f t t.c;;
- esac;;
-*)
- case "$tval" in
- $define) tval=true;;
- *) tval=false;;
- esac;;
-esac;
-eval "$2=$tval"'
+: determine whether to install perl also as /usr/bin/perl
-: define an is-in-libc? function
-inlibc='echo " "; td=$define; tu=$undef;
-sym=$1; var=$2; eval "was=\$$2";
-tx=yes;
-case "$reuseval$was" in
-true) ;;
-true*) tx=no;;
-esac;
-case "$tx" in
-yes)
- set $sym tres -f;
- eval $csym;
- case "$tres" in
- true)
- echo "$sym() found." >&4;
- case "$was" in $undef) . ./whoa; esac; eval "$var=\$td";;
- *)
- echo "$sym() NOT found." >&4;
- case "$was" in $define) . ./whoa; esac; eval "$var=\$tu";;
- esac;;
-*)
- case "$was" in
- $define) echo "$sym() found." >&4;;
- *) echo "$sym() NOT found." >&4;;
- esac;;
-esac'
+echo " "
+if $test -d /usr/bin -a "X$installbin" != X/usr/bin; then
+ $cat <<EOM
+Many scripts expect perl to be installed as /usr/bin/perl.
+I can install the perl you are about to compile also as /usr/bin/perl
+(in addition to $installbin/perl).
+EOM
+ case "$installusrbinperl" in
+ "$undef"|[nN]*) dflt='n';;
+ *) dflt='y';;
+ esac
+ rp="Do you want to install perl as /usr/bin/perl?"
+ . ./myread
+ case "$ans" in
+ [yY]*) val="$define";;
+ *) val="$undef" ;;
+ esac
+else
+ val="$undef"
+fi
+set installusrbinperl
+eval $setvar
+
+: see if dld is available
+set dld.h i_dld
+eval $inhdr
: see if dlopen exists
xxx_runnm="$runnm"
esac
for thisflag in $ldflags; do
case "$thisflag" in
- -L*)
+ -L*|-R*)
case " $dflt " in
*" $thisflag "*) ;;
*) dflt="$dflt $thisflag" ;;
*) $cat >&4 <<EOM
WARNING: Use of the shrpdir variable for the installation location of
the shared $libperl is not supported. It was never documented and
-will not work in this version. Let me (perlbug@perl.com)
+will not work in this version. Let me (perlbug@perl.org)
know of any problems this may cause.
EOM
none) ldlibpthname='' ;;
esac
+: determine where manual pages are on this system
+echo " "
+case "$sysman" in
+'')
+ syspath='/usr/man/man1 /usr/man/mann /usr/man/manl /usr/man/local/man1'
+ syspath="$syspath /usr/man/u_man/man1 /usr/share/man/man1"
+ syspath="$syspath /usr/catman/u_man/man1 /usr/man/l_man/man1"
+ syspath="$syspath /usr/local/man/u_man/man1 /usr/local/man/l_man/man1"
+ syspath="$syspath /usr/man/man.L /local/man/man1 /usr/local/man/man1"
+ sysman=`./loc . /usr/man/man1 $syspath`
+ ;;
+esac
+if $test -d "$sysman"; then
+ echo "System manual is in $sysman." >&4
+else
+ echo "Could not find manual pages in source form." >&4
+fi
+
: determine where manual pages go
set man1dir man1dir none
eval $prefixit
/[ ]$myhostname[ . ]/p" > hosts
}
tmp_re="[ . ]"
- $test x`$awk "/[0-9].*[ ]$myhostname$tmp_re/ { sum++ }
+ if $test -f hosts; then
+ $test x`$awk "/[0-9].*[ ]$myhostname$tmp_re/ { sum++ }
END { print sum }" hosts` = x1 || tmp_re="[ ]"
- dflt=.`$awk "/[0-9].*[ ]$myhostname$tmp_re/ {for(i=2; i<=NF;i++) print \\\$i}" \
- hosts | $sort | $uniq | \
- $sed -n -e "s/$myhostname\.\([-a-zA-Z0-9_.]\)/\1/p"`
- case `$echo X$dflt` in
- X*\ *) echo "(Several hosts in /etc/hosts matched hostname)"
+ dflt=.`$awk "/[0-9].*[ ]$myhostname$tmp_re/ {for(i=2; i<=NF;i++) print \\\$i}" \
+ hosts | $sort | $uniq | \
+ $sed -n -e "s/$myhostname\.\([-a-zA-Z0-9_.]\)/\1/p"`
+ case `$echo X$dflt` in
+ X*\ *) echo "(Several hosts in the database matched hostname)"
+ dflt=.
+ ;;
+ X.) echo "(You do not have fully-qualified names in the hosts database)"
+ ;;
+ esac
+ else
+ echo "(I cannot locate a hosts database anywhere)"
dflt=.
- ;;
- X.) echo "(You do not have fully-qualified names in /etc/hosts)"
- ;;
- esac
+ fi
case "$dflt" in
.)
tans=`./loc resolv.conf X /etc /usr/etc`
If you or somebody else will be maintaining perl at your site, please
fill in the correct e-mail address here so that they may be contacted
if necessary. Currently, the "perlbug" program included with perl
-will send mail to this address in addition to perlbug@perl.com. You may
+will send mail to this address in addition to perlbug@perl.org. You may
enter "none" for no administrator.
EOM
installsitebin="$sitebinexp"
fi
-: see if sqrtl exists
-set sqrtl d_sqrtl
-eval $inlibc
-
-case "$ccflags" in
-*-DUSE_LONG_DOUBLE*|*-DUSE_MORE_BITS*) uselongdouble="$define" ;;
-esac
-
-case "$uselongdouble" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-cat <<EOM
-
-Perl can be built to take advantage of long doubles which
-(if available) may give more accuracy and range for floating point numbers.
-
-If this doesn't make any sense to you, just accept the default '$dflt'.
-EOM
-rp='Try to use long doubles if available?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
-esac
-set uselongdouble
-eval $setvar
-
-case "$uselongdouble" in
-true|[yY]*) uselongdouble="$define" ;;
-esac
-
-case "$uselongdouble" in
-$define)
-: Look for a hint-file generated 'call-back-unit'. If the
-: user has specified that long doubles should be used,
-: we may need to set or change some other defaults.
- if $test -f uselongdouble.cbu; then
- echo "Your platform has some specific hints for long doubles, using them..."
- . ./uselongdouble.cbu
- else
- $cat <<EOM
-(Your platform doesn't have any specific hints for long doubles.)
-EOM
- fi
- ;;
-esac
-
-case "$uselongdouble:$d_sqrtl" in
-$define:$undef)
- $cat <<EOM >&4
-
-*** You requested the use of long doubles but you do not seem to have
-*** the mathematic functions for long doubles. I'm disabling the use
-*** of long doubles.
-
-EOM
- uselongdouble=$undef
- ;;
-esac
-
case "$useperlio" in
$define|true|[yY]*) dflt='y';;
*) dflt='n';;
set qgcvt d_qgcvt
eval $inlibc
-: check for length of double
-echo " "
-case "$doublesize" in
-'')
- echo "Checking to see how big your double precision numbers are..." >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", (int)sizeof(double));
- exit(0);
-}
-EOCP
- set try
- if eval $compile_ok; then
- doublesize=`./try`
- echo "Your double is $doublesize bytes long."
- else
- dflt='8'
- echo "(I can't seem to compile the test program. Guessing...)"
- rp="What is the size of a double precision number (in bytes)?"
- . ./myread
- doublesize="$ans"
- fi
- ;;
-esac
-$rm -f try.c try
-
-: check for long doubles
-echo " "
-echo "Checking to see if you have long double..." >&4
-echo 'int main() { long double x = 7.0; }' > try.c
-set try
-if eval $compile; then
- val="$define"
- echo "You have long double."
-else
- val="$undef"
- echo "You do not have long double."
-fi
-$rm try.*
-set d_longdbl
-eval $setvar
-
-: check for length of long double
-case "${d_longdbl}${longdblsize}" in
-$define)
- echo " "
- echo "Checking to see how big your long doubles are..." >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", sizeof(long double));
-}
-EOCP
- set try
- set try
- if eval $compile; then
- longdblsize=`./try$exe_ext`
- echo "Your long doubles are $longdblsize bytes long."
- else
- dflt='8'
- echo " "
- echo "(I can't seem to compile the test program. Guessing...)" >&4
- rp="What is the size of a long double (in bytes)?"
- . ./myread
- longdblsize="$ans"
- fi
- if $test "X$doublesize" = "X$longdblsize"; then
- echo "(That isn't any different from an ordinary double.)"
- fi
- ;;
-esac
-$rm -f try.* try
-
echo " "
if $test X"$d_longdbl" = X"$define"; then
case "$yyy" in
123.456)
sPRIfldbl='"f"'; sPRIgldbl='"g"'; sPRIeldbl='"e"';
- sPRIFldbl='"F"'; sPRIGldbl='"G"'; sPRIEldbl='"E"';
+ sPRIFUldbl='"F"'; sPRIGUldbl='"G"'; sPRIEUldbl='"E"';
echo "We will use %f."
;;
esac
case "$yyy" in
123.456)
sPRIfldbl='"llf"'; sPRIgldbl='"llg"'; sPRIeldbl='"lle"';
- sPRIFldbl='"llF"'; sPRIGldbl='"llG"'; sPRIEldbl='"llE"';
+ sPRIFUldbl='"llF"'; sPRIGUldbl='"llG"'; sPRIEUldbl='"llE"';
echo "We will use %llf."
;;
esac
case "$yyy" in
123.456)
sPRIfldbl='"Lf"'; sPRIgldbl='"Lg"'; sPRIeldbl='"Le"';
- sPRIFldbl='"LF"'; sPRIGldbl='"LG"'; sPRIEldbl='"LE"';
+ sPRIFUldbl='"LF"'; sPRIGUldbl='"LG"'; sPRIEUldbl='"LE"';
echo "We will use %Lf."
;;
esac
case "$yyy" in
123.456)
sPRIfldbl='"lf"'; sPRIgldbl='"lg"'; sPRIeldbl='"le"';
- sPRIFldbl='"lF"'; sPRIGldbl='"lG"'; sPRIEldbl='"lE"';
+ sPRIFUldbl='"lF"'; sPRIGUldbl='"lG"'; sPRIEUldbl='"lE"';
echo "We will use %lf."
;;
esac
if $test X"$sPRIfldbl" = X; then
echo "Cannot figure out how to print long doubles." >&4
+else
+ sSCNfldbl=$sPRIfldbl # expect consistency
fi
$rm -f try try.*
case "$sPRIfldbl" in
'') d_PRIfldbl="$undef"; d_PRIgldbl="$undef"; d_PRIeldbl="$undef";
- d_PRIFldbl="$undef"; d_PRIGldbl="$undef"; d_PRIEldbl="$undef";
+ d_PRIFUldbl="$undef"; d_PRIGUldbl="$undef"; d_PRIEUldbl="$undef";
+ d_SCNfldbl="$undef";
;;
*) d_PRIfldbl="$define"; d_PRIgldbl="$define"; d_PRIeldbl="$define";
- d_PRIFldbl="$define"; d_PRIGldbl="$define"; d_PRIEldbl="$define";
+ d_PRIFUldbl="$define"; d_PRIGUldbl="$define"; d_PRIEUldbl="$define";
+ d_SCNfldbl="$define";
;;
esac
: Check how to convert floats to strings.
-if test "X$d_Gconvert" = X; then
- echo " "
- echo "Checking for an efficient way to convert floats to strings."
- echo " " > try.c
- case "$uselongdouble" in
- "$define") echo "#define USE_LONG_DOUBLE" >>try.c ;;
- esac
- case "$d_longdbl" in
- "$define") echo "#define HAS_LONG_DOUBLE" >>try.c ;;
- esac
- case "$d_PRIgldbl" in
- "$define") echo "#define HAS_PRIgldbl" >>try.c ;;
- esac
- $cat >>try.c <<EOP
+echo " "
+echo "Checking for an efficient way to convert floats to strings."
+echo " " > try.c
+case "$uselongdouble" in
+"$define") echo "#define USE_LONG_DOUBLE" >>try.c ;;
+esac
+case "$d_longdbl" in
+"$define") echo "#define HAS_LONG_DOUBLE" >>try.c ;;
+esac
+case "$d_PRIgldbl" in
+"$define") echo "#define HAS_PRIgldbl" >>try.c ;;
+esac
+$cat >>try.c <<EOP
#ifdef TRY_gconvert
#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
char *myname = "gconvert";
Gconvert((DOUBLETYPE)-100000.0, 8, 0, buf);
checkit("-100000", buf);
+ Gconvert((DOUBLETYPE)123.456, 8, 0, buf);
+ checkit("123.456", buf);
+
exit(0);
}
EOP
- case "$d_Gconvert" in
- gconvert*) xxx_list='gconvert gcvt sprintf' ;;
- gcvt*) xxx_list='gcvt gconvert sprintf' ;;
- sprintf*) xxx_list='sprintf gconvert gcvt' ;;
- *) xxx_list='gconvert gcvt sprintf' ;;
- esac
-
- case "$d_longdbl$uselongdouble$d_qgcvt" in
- "$define$define$define") xxx_list="`echo $xxx_list|sed 's/gcvt/qgcvt gcvt/'`" ;;
- esac
+case "$d_Gconvert" in
+gconvert*) xxx_list='gconvert gcvt sprintf' ;;
+gcvt*) xxx_list='gcvt gconvert sprintf' ;;
+sprintf*) xxx_list='sprintf gconvert gcvt' ;;
+*) xxx_list='gconvert gcvt sprintf' ;;
+esac
+
+case "$d_longdbl$uselongdouble$d_PRIgldbl" in
+"$define$define$define")
+ # for long doubles prefer first qgcvt, then sprintf
+ xxx_list="`echo $xxx_list|sed s/sprintf//`"
+ xxx_list="sprintf $xxx_list"
+ case "$d_qgcvt" in
+ "$define") xxx_list="qgcvt $xxx_list" ;;
+ esac
+ ;;
+esac
- for xxx_convert in $xxx_list; do
- echo "Trying $xxx_convert..."
- $rm -f try try$_o
- set try -DTRY_$xxx_convert
- if eval $compile; then
- echo "$xxx_convert() found." >&4
- if ./try; then
- echo "I'll use $xxx_convert to convert floats into a string." >&4
- break;
- else
- echo "...But $xxx_convert didn't work as I expected."
- fi
+for xxx_convert in $xxx_list; do
+ echo "Trying $xxx_convert..."
+ $rm -f try try$_o
+ set try -DTRY_$xxx_convert
+ if eval $compile; then
+ echo "$xxx_convert() found." >&4
+ if ./try; then
+ echo "I'll use $xxx_convert to convert floats into a string." >&4
+ break;
else
- echo "$xxx_convert NOT found." >&4
+ echo "...But $xxx_convert didn't work as I expected."
fi
- done
-
- case "$xxx_convert" in
- gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
- gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
- qgcvt) d_Gconvert='qgcvt((x),(n),(b))' ;;
- *) case "$uselongdouble$d_longdbl$d_PRIgldbl" in
- "$define$define$define")
- d_Gconvert="sprintf((b),\"%.*$sPRIgldbl\",(n),(x))" ;;
- *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
- esac
- ;;
- esac
-fi
+ else
+ echo "$xxx_convert NOT found." >&4
+ fi
+done
+
+case "$xxx_convert" in
+gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
+gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
+qgcvt) d_Gconvert='qgcvt((x),(n),(b))' ;;
+*) case "$uselongdouble$d_longdbl$d_PRIgldbl" in
+ "$define$define$define")
+ d_Gconvert="sprintf((b),\"%.*\"$sPRIgldbl,(n),(x))" ;;
+ *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
+ esac
+ ;;
+esac
: Initialize h_fcntl
h_fcntl=false
set try
if eval $compile; then
val="$define"
- echo "You have have long long."
+ echo "You have long long."
else
val="$undef"
echo "You do not have long long."
esac
-
: check for off64_t
echo " "
echo "Checking to see if you have off64_t..." >&4
set setpriority d_setprior
eval $inlibc
+: see if setproctitle exists
+set setproctitle d_setproctitle
+eval $inlibc
+
: see if setpwent exists
set setpwent d_setpwent
eval $inlibc
*) dflt='n';;
esac
echo "$package can use the sfio library, but it is experimental."
+ case "$useperlio" in
+ "$undef")
+ echo "For sfio also the PerlIO abstraction layer is needed."
+ echo "Earlier you said you wouldn't want that."
+ ;;
+ esac
rp="You seem to have sfio available, do you want to try using it?"
. ./myread
case "$ans" in
- y|Y) ;;
+ y|Y) echo "Ok, turning on both sfio and PerlIO, then."
+ useperlio="$define"
+ val="$define"
+ ;;
*) echo "Ok, avoiding sfio this time. I'll use stdio instead."
val="$undef"
: Remove sfio from list of libraries to use
;;
*) case "$usesfio" in
true|$define|[yY]*)
- echo "Sorry, cannot find sfio on this machine" >&4
- echo "Ignoring your setting of usesfio=$usesfio" >&4
+ echo "Sorry, cannot find sfio on this machine." >&4
+ echo "Ignoring your setting of usesfio=$usesfio." >&4
+ val="$undef"
;;
esac
;;
eval $setvar
$rm -f try.c try
+: see if socks5_init exists
+set socks5_init d_socks5_init
+eval $inlibc
+
: see if sys/stat.h is available
set sys/stat.h i_sysstat
eval $inhdr
#ifdef __hpux
#define strtoll __strtoll
#endif
+#ifdef __EMX__
+#define strtoll _strtoll
+#endif
#include <stdio.h>
extern long long int strtoll(char *s, char **, int);
static int bad = 0;
EOCP
set try
if eval $compile; then
- case "`./try`" in
+ yyy=`./try`
+ case "$yyy" in
ok) echo "Your strtoll() seems to be working okay." ;;
*) cat <<EOM >&4
Your strtoll() doesn't seem to be working okay.
d_strtoll="$undef"
;;
esac
+ else
+ echo "(I can't seem to compile the test program--assuming it doesn't)"
+ d_strtoll="$undef"
fi
;;
esac
set tebcdic
if eval $compile_ok; then
if ./tebcdic; then
- echo "You have EBCDIC." >&4
+ echo "You seem to speak EBCDIC." >&4
val="$define"
else
- echo "Nope, no EBCDIC, probably ASCII or some ISO Latin." >&4
+ echo "Nope, no EBCDIC, probably ASCII or some ISO Latin. Or UTF8." >&4
fi
else
echo "I'm unable to compile the test program." >&4
- echo "I'll assume ASCII or some ISO Latin." >&4
+ echo "I'll assume ASCII or some ISO Latin. Or UTF8." >&4
fi
$rm -f tebcdic.c tebcdic
set ebcdic
case "$yyy" in
12345678901)
sPRId64='"d"'; sPRIi64='"i"'; sPRIu64='"u"';
- sPRIo64='"o"'; sPRIx64='"x"'; sPRIX64='"X"';
+ sPRIo64='"o"'; sPRIx64='"x"'; sPRIXU64='"X"';
echo "We will use %d."
;;
esac
case "$yyy" in
12345678901)
sPRId64='"ld"'; sPRIi64='"li"'; sPRIu64='"lu"';
- sPRIo64='"lo"'; sPRIx64='"lx"'; sPRIX64='"lX"';
+ sPRIo64='"lo"'; sPRIx64='"lx"'; sPRIXU64='"lX"';
echo "We will use %ld."
;;
esac
case "$yyy" in
12345678901)
sPRId64=PRId64; sPRIi64=PRIi64; sPRIu64=PRIu64;
- sPRIo64=PRIo64; sPRIx64=PRIx64; sPRIX64=PRIX64;
+ sPRIo64=PRIo64; sPRIx64=PRIx64; sPRIXU64=PRIXU64;
echo "We will use the C9X style."
;;
esac
#include <sys/types.h>
#include <stdio.h>
int main() {
- long long q = 12345678901LL; /* AIX cc requires the LL prefix. */
+ long long q = 12345678901LL; /* AIX cc requires the LL suffix. */
printf("%lld\n", q);
}
EOCP
case "$yyy" in
12345678901)
sPRId64='"lld"'; sPRIi64='"lli"'; sPRIu64='"llu"';
- sPRIo64='"llo"'; sPRIx64='"llx"'; sPRIX64='"llX"';
+ sPRIo64='"llo"'; sPRIx64='"llx"'; sPRIXU64='"llX"';
echo "We will use the %lld style."
;;
esac
case "$yyy" in
12345678901)
sPRId64='"Ld"'; sPRIi64='"Li"'; sPRIu64='"Lu"';
- sPRIo64='"Lo"'; sPRIx64='"Lx"'; sPRIX64='"LX"';
+ sPRIo64='"Lo"'; sPRIx64='"Lx"'; sPRIXU64='"LX"';
echo "We will use %Ld."
;;
esac
case "$yyy" in
12345678901)
sPRId64='"qd"'; sPRIi64='"qi"'; sPRIu64='"qu"';
- sPRIo64='"qo"'; sPRIx64='"qx"'; sPRIX64='"qX"';
+ sPRIo64='"qo"'; sPRIx64='"qx"'; sPRIXU64='"qX"';
echo "We will use %qd."
;;
esac
case "$sPRId64" in
'') d_PRId64="$undef"; d_PRIi64="$undef"; d_PRIu64="$undef";
- d_PRIo64="$undef"; d_PRIx64="$undef"; d_PRIX64="$undef";
+ d_PRIo64="$undef"; d_PRIx64="$undef"; d_PRIXU64="$undef";
;;
*) d_PRId64="$define"; d_PRIi64="$define"; d_PRIu64="$define";
- d_PRIo64="$define"; d_PRIx64="$define"; d_PRIX64="$define";
+ d_PRIo64="$define"; d_PRIx64="$define"; d_PRIXU64="$define";
;;
esac
uvuformat="$sPRIu64"
uvoformat="$sPRIo64"
uvxformat="$sPRIx64"
+ uvXUformat="$sPRIXU64"
else
if $test X"$ivsize" = X"$longsize"; then
ivdformat='"ld"'
uvuformat='"lu"'
uvoformat='"lo"'
uvxformat='"lx"'
+ uvXUformat='"lX"'
else
if $test X"$ivsize" = X"$intsize"; then
ivdformat='"d"'
uvuformat='"u"'
uvoformat='"o"'
uvxformat='"x"'
+ uvXUformat='"X"'
else
: far out
if $test X"$ivsize" = X"$shortsize"; then
uvuformat='"hu"'
uvoformat='"ho"'
uvxformat='"hx"'
+ uvXUformat='"hX"'
fi
fi
fi
fi
+if $test X"$uselongdouble" = X"$define" -a X"$d_longdbl" = X"$define" -a X"$d_PRIgldbl" = X"$define"; then
+ nveformat="$sPRIeldbl"
+ nvfformat="$sPRIfldbl"
+ nvgformat="$sPRIgldbl"
+ nvEUformat="$sPRIEUldbl"
+ nvFUformat="$sPRIFUldbl"
+ nvGUformat="$sPRIGUldbl"
+else
+ nveformat='"e"'
+ nvfformat='"f"'
+ nvgformat='"g"'
+ nvEUformat='"E"'
+ nvFUformat='"F"'
+ nvGUformat='"G"'
+fi
+
case "$ivdformat" in
'') echo "$0: Fatal: failed to find format strings, cannot continue." >& 4
exit 1
dflt=''
case "$pg" in
/*) dflt=$pg;;
+ [a-zA-Z]:/*) dflt=$pg;;
esac
case "$more" in
/*) dflt=$more;;
+ [a-zA-Z]:/*) dflt=$more;;
esac
case "$less" in
/*) dflt=$less;;
+ [a-zA-Z]:/*) dflt=$less;;
esac
case "$dflt" in
'') dflt=/usr/ucb/more;;
set ieeefp.h i_ieeefp
eval $inhdr
+: see if this is a libutil.h system
+set libutil.h i_libutil
+eval $inhdr
+
: see if locale.h is available
set locale.h i_locale
eval $inhdr
EOSH
./tr '[a-z]' '[A-Z]' < Cppsym.know > Cppsym.a
./tr '[A-Z]' '[a-z]' < Cppsym.know > Cppsym.b
-$cat Cppsym.a Cppsym.b | $tr ' ' $trnl | sort | uniq > Cppsym.know
-$rm -f Cppsym.a Cppsym.b
+$cat Cppsym.know > Cppsym.c
+$cat Cppsym.a Cppsym.b Cppsym.c | $tr ' ' $trnl | sort | uniq > Cppsym.know
+$rm -f Cppsym.a Cppsym.b Cppsym.c
cat <<EOSH > Cppsym
$startsh
if $test \$# -gt 0; then
ccflags="$ccflags"
case "$osname-$gccversion" in
irix-) ccflags="\$ccflags -woff 1178" ;;
+os2-*) ccflags="\$ccflags -Zlinker /PM:VIO" ;;
esac
$cc $optimize \$ccflags $ldflags -o try try.c $libs && ./try$exe_ext
EOSH
else
if $test -s ccsym.com; then
echo "Your C compiler and pre-processor define these symbols:"
- $sed -e 's/\(.*\)=.*/\1/' ccsym.com
+ $sed -e 's/\(..*\)=.*/\1/' ccsym.com
also='also '
symbols='ones'
cppccsymbols=`$cat ccsym.com`
if $test -s ccsym.cpp; then
$test "$also" && echo " "
echo "Your C pre-processor ${also}defines the following symbols:"
- $sed -e 's/\(.*\)=.*/\1/' ccsym.cpp
+ $sed -e 's/\(..*\)=.*/\1/' ccsym.cpp
also='further '
cppsymbols=`$cat ccsym.cpp`
cppsymbols=`echo $cppsymbols`
if $test -s ccsym.own; then
$test "$also" && echo " "
echo "Your C compiler ${also}defines the following cpp symbols:"
- $sed -e 's/\(.*\)=1/\1/' ccsym.own
- $sed -e 's/\(.*\)=.*/\1/' ccsym.own | $uniq >>Cppsym.true
+ $sed -e 's/\(..*\)=1/\1/' ccsym.own
+ $sed -e 's/\(..*\)=.*/\1/' ccsym.own | $uniq >>Cppsym.true
ccsymbols=`$cat ccsym.own`
ccsymbols=`echo $ccsymbols`
$test "$silent" || sleep 1
fi
fi
-$rm -f ccsym*
+$rm -f ccsym* Cppsym.*
: see if this is a termio system
val="$undef"
true|$define|y) avail_ext="$avail_ext $xxx" ;;
esac
;;
+ Sys/Syslog|sys/syslog)
+ : XXX syslog requires socket
+ case "$d_socket" in
+ true|$define|y) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
Thread|thread)
case "$usethreads" in
true|$define|y) avail_ext="$avail_ext $xxx" ;;
shift
extensions="$*"
+: Remove libraries needed only for extensions
+: The appropriate ext/Foo/Makefile.PL will add them back in, if necessary.
+case "$usedl" in
+$define|true|[yY]*)
+ set X `echo " $libs " | sed -e 's@ -lndbm @ @' -e 's@ -lgdbm @ @' -e 's@ -ldbm @ @' -e 's@ -ldb @ @'`
+ shift
+ perllibs="$*"
+ ;;
+*) perllibs="$libs"
+ ;;
+esac
+
: Remove build directory name from cppstdin so it can be used from
: either the present location or the final installed location.
echo " "
cccdlflags='$cccdlflags'
ccdlflags='$ccdlflags'
ccflags='$ccflags'
+ccflags_uselargefiles='$ccflags_uselargefiles'
+ccname='$ccname'
ccsymbols='$ccsymbols'
+ccversion='$ccversion'
cf_by='$cf_by'
cf_email='$cf_email'
cf_time='$cf_time'
cryptlib='$cryptlib'
csh='$csh'
d_Gconvert='$d_Gconvert'
-d_PRIEldbl='$d_PRIEldbl'
-d_PRIFldbl='$d_PRIFldbl'
-d_PRIGldbl='$d_PRIGldbl'
-d_PRIX64='$d_PRIX64'
+d_PRIEUldbl='$d_PRIEUldbl'
+d_PRIFUldbl='$d_PRIFUldbl'
+d_PRIGUldbl='$d_PRIGUldbl'
+d_PRIXU64='$d_PRIXU64'
d_PRId64='$d_PRId64'
d_PRIeldbl='$d_PRIeldbl'
d_PRIfldbl='$d_PRIfldbl'
d_PRIo64='$d_PRIo64'
d_PRIu64='$d_PRIu64'
d_PRIx64='$d_PRIx64'
+d_SCNfldbl='$d_SCNfldbl'
d_access='$d_access'
d_accessx='$d_accessx'
d_alarm='$d_alarm'
d_setpgrp2='$d_setpgrp2'
d_setpgrp='$d_setpgrp'
d_setprior='$d_setprior'
+d_setproctitle='$d_setproctitle'
d_setpwent='$d_setpwent'
d_setregid='$d_setregid'
d_setresgid='$d_setresgid'
d_socket='$d_socket'
d_socklen_t='$d_socklen_t'
d_sockpair='$d_sockpair'
+d_socks5_init='$d_socks5_init'
d_sqrtl='$d_sqrtl'
d_statblks='$d_statblks'
d_statfs_f_flags='$d_statfs_f_flags'
full_ar='$full_ar'
full_csh='$full_csh'
full_sed='$full_sed'
+gccosandvers='$gccosandvers'
gccversion='$gccversion'
gidformat='$gidformat'
gidsign='$gidsign'
h_sysfile='$h_sysfile'
hint='$hint'
hostcat='$hostcat'
-huge='$huge'
i16size='$i16size'
i16type='$i16type'
i32size='$i32size'
i_iconv='$i_iconv'
i_ieeefp='$i_ieeefp'
i_inttypes='$i_inttypes'
+i_libutil='$i_libutil'
i_limits='$i_limits'
i_locale='$i_locale'
i_machcthr='$i_machcthr'
installprefixexp='$installprefixexp'
installprivlib='$installprivlib'
installscript='$installscript'
+installscripts='$installscripts'
installsitearch='$installsitearch'
installsitebin='$installsitebin'
installsitelib='$installsitelib'
ivtype='$ivtype'
known_extensions='$known_extensions'
ksh='$ksh'
-large='$large'
ld='$ld'
lddlflags='$lddlflags'
ldflags='$ldflags'
+ldflags_uselargefiles='$ldflags_uselargefiles'
ldlibpthname='$ldlibpthname'
less='$less'
lib_ext='$lib_ext'
libsfound='$libsfound'
libspath='$libspath'
libswanted='$libswanted'
+libswanted_uselargefiles='$libswanted_uselargefiles'
line='$line'
lint='$lint'
lkflags='$lkflags'
man3dir='$man3dir'
man3direxp='$man3direxp'
man3ext='$man3ext'
-medium='$medium'
mips_type='$mips_type'
mkdir='$mkdir'
mmaptype='$mmaptype'
-models='$models'
modetype='$modetype'
more='$more'
multiarch='$multiarch'
nm_so_opt='$nm_so_opt'
nonxs_ext='$nonxs_ext'
nroff='$nroff'
+nvEUformat='$nvEUformat'
+nvFUformat='$nvFUformat'
+nvGUformat='$nvGUformat'
+nveformat='$nveformat'
+nvfformat='$nvfformat'
+nvgformat='$nvgformat'
nvsize='$nvsize'
nvtype='$nvtype'
o_nonblock='$o_nonblock'
perl5='$perl5'
perl='$perl'
perladmin='$perladmin'
+perllibs='$perllibs'
perlpath='$perlpath'
pg='$pg'
phostname='$phostname'
rm='$rm'
rmail='$rmail'
runnm='$runnm'
-sPRIEldbl='$sPRIEldbl'
-sPRIFldbl='$sPRIFldbl'
-sPRIGldbl='$sPRIGldbl'
-sPRIX64='$sPRIX64'
+sPRIEUldbl='$sPRIEUldbl'
+sPRIFUldbl='$sPRIFUldbl'
+sPRIGUldbl='$sPRIGUldbl'
+sPRIXU64='$sPRIXU64'
sPRId64='$sPRId64'
sPRIeldbl='$sPRIeldbl'
sPRIfldbl='$sPRIfldbl'
sPRIo64='$sPRIo64'
sPRIu64='$sPRIu64'
sPRIx64='$sPRIx64'
+sSCNfldbl='$sSCNfldbl'
sched_yield='$sched_yield'
scriptdir='$scriptdir'
scriptdirexp='$scriptdirexp'
sizetype='$sizetype'
sleep='$sleep'
smail='$smail'
-small='$small'
so='$so'
sockethdr='$sockethdr'
socketlib='$socketlib'
sort='$sort'
spackage='$spackage'
spitshell='$spitshell'
-split='$split'
src='$src'
ssizetype='$ssizetype'
startperl='$startperl'
usevfork='$usevfork'
usrinc='$usrinc'
uuname='$uuname'
+uvXUformat='$uvXUformat'
uvoformat='$uvoformat'
uvsize='$uvsize'
uvtype='$uvtype'
. UU/myread
case "$ans" in
y*)
- $make depend && echo "Now you must run a $make."
+ $make depend && echo "Now you must run '$make'."
;;
*)
echo "You must run '$make depend' then '$make'."