# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Mon Jan 17 10:22:31 EET 2000 [metaconfig 3.0 PL70]
+# Generated on Wed Feb 9 21:43:07 EET 2000 [metaconfig 3.0 PL70]
# (with additional metaconfig patches by perlbug@perl.com)
cat >/tmp/c1$$ <<EOF
d_ftime=''
d_gettimeod=''
d_Gconvert=''
+d_getcwd=''
d_getgrent=''
d_getgrps=''
d_gethbyaddr=''
d_gnulibc=''
d_hasmntopt=''
d_htonl=''
+d_iconv=''
d_inetaton=''
d_int64t=''
d_isascii=''
d_memmove=''
d_memset=''
d_mkdir=''
+d_mkdtemp=''
d_mkfifo=''
+d_mkstemp=''
+d_mkstemps=''
d_mktime=''
+d_mmap=''
+mmaptype=''
+d_mprotect=''
d_msg=''
d_msgctl=''
d_msgget=''
d_msgrcv=''
d_msgsnd=''
+d_msync=''
+d_munmap=''
d_nice=''
d_open3=''
d_fpathconf=''
i_gdbm=''
d_grpasswd=''
i_grp=''
+i_iconv=''
i_inttypes=''
i_limits=''
i_locale=''
i_sysfilio=''
i_sysioctl=''
i_syssockio=''
+i_syslog=''
+i_sysmman=''
i_sysmount=''
i_sysndir=''
i_sysparam=''
i_varhdr=''
i_vfork=''
inc_version_list=''
+inc_version_list_init=''
installprefix=''
installprefixexp=''
installstyle=''
xlibpth=''
ignore_versioned_solibs=''
libs=''
+libsdirs=''
+libsfiles=''
+libsfound=''
lns=''
d_PRIEldbl=''
d_PRIFldbl=''
version=''
perladmin=''
perlpath=''
+d_nv_preserves_uv=''
i16size=''
i16type=''
i32size=''
vendorprefixexp=''
defvoidused=''
voidflags=''
+pm_apiversion=''
+xs_apiversion=''
CONFIG=''
define='define'
fi
i_whoami=''
-: list of known cpp symbols, sorted alphabetically
-al="AMIX BIT_MSF BSD BSD4_3 BSD_NET2 CMU CRAY DGUX DOLPHIN DPX2"
-al="$al GO32 GOULD_PN HP700 I386 I80960 I960 Lynx M68000 M68K MACH"
-al="$al MIPSEB MIPSEL MSDOS MTXINU MULTIMAX MVS"
-al="$al M_COFF M_I186 M_I286 M_I386 M_I8086 M_I86 M_I86SM"
-al="$al M_SYS3 M_SYS5 M_SYSIII M_SYSV M_UNIX M_XENIX"
-al="$al NeXT OCS88 OSF1 PARISC PC532 PORTAR POSIX"
-al="$al PWB R3000 RES RISC6000 RT Sun386i SVR3 SVR4 SVR5"
-al="$al SYSTYPE_BSD SYSTYPE_SVR4 SYSTYPE_SYSV Tek4132 Tek4300"
-al="$al UMAXV USGr4 USGr4_2 UTEK UTS UTek UnicomPBB UnicomPBD Utek"
-al="$al VMS Xenix286"
-al="$al _AIX _AIX32 _AIX370 _AIX41 _AM29000 _COFF _CRAY _CX_UX _EPI"
-al="$al _IBMESA _IBMR2 _M88K _M88KBCS_TARGET _POWER"
-al="$al _MIPSEB _MIPSEL _M_COFF _M_I86 _M_I86SM _M_SYS3"
-al="$al _M_SYS5 _M_SYSIII _M_SYSV _M_UNIX _M_XENIX _NLS _PGC_ _R3000"
-al="$al _SYSTYPE_BSD _SYSTYPE_BSD43 _SYSTYPE_SVR4"
-al="$al _SYSTYPE_SYSV _SYSV3 _U370 _UNICOS"
-al="$al __386BSD__ __BIG_ENDIAN __BIG_ENDIAN__ __BSD_4_4__"
-al="$al __DGUX__ __DPX2__ __H3050R __H3050RX"
-al="$al __LITTLE_ENDIAN __LITTLE_ENDIAN__ __MACH__"
-al="$al __MIPSEB __MIPSEB__ __MIPSEL __MIPSEL__"
-al="$al __Next__ __OSF1__ __PARAGON__ __PGC__ __PWB __STDC__"
-al="$al __SVR4_2__ __UMAXV__"
-al="$al ____386BSD____ __alpha __alpha__ __amiga"
-al="$al __bsd4_2 __bsd4_2__ __bsdi__ __convex__"
-al="$al __host_mips__"
-al="$al __hp9000s200 __hp9000s300 __hp9000s400 __hp9000s500"
-al="$al __hp9000s500 __hp9000s700 __hp9000s800"
-al="$al __hppa __hpux __hp_osf __i286 __i286__ __i386 __i386__"
-al="$al __i486 __i486__ __i860 __i860__ __ibmesa __ksr1__ __linux__"
-al="$al __m68k __m68k__ __m88100__ __m88k __m88k__"
-al="$al __mc68000 __mc68000__ __mc68020 __mc68020__"
-al="$al __mc68030 __mc68030__ __mc68040 __mc68040__"
-al="$al __mc88100 __mc88100__ __mips __mips__"
-al="$al __motorola__ __osf__ __pa_risc __sparc__ __stdc__"
-al="$al __sun __sun__ __svr3__ __svr4__ __ultrix __ultrix__"
-al="$al __unix __unix__ __uxpm__ __uxps__ __vax __vax__"
-al="$al _host_mips _mips _unix"
-al="$al a29k aegis aix aixpc alliant alpha am29000 amiga ansi ardent"
-al="$al apollo ardent att386 att3b"
-al="$al bsd bsd43 bsd4_2 bsd4_3 bsd4_4 bsdi bull"
-al="$al cadmus clipper concurrent convex cray ctix"
-al="$al dmert encore gcos gcx gimpel gould"
-al="$al hbullx20 hcx host_mips hp200 hp300 hp700 hp800"
-al="$al hp9000 hp9000s300 hp9000s400 hp9000s500"
-al="$al hp9000s700 hp9000s800 hp9k8 hppa hpux"
-al="$al i186 i286 i386 i486 i8086"
-al="$al i80960 i860 iAPX286 ibm ibm032 ibmrt interdata is68k"
-al="$al ksr1 linux luna luna88k m68k m88100 m88k"
-al="$al mc300 mc500 mc68000 mc68010 mc68020 mc68030"
-al="$al mc68040 mc68060 mc68k mc68k32 mc700"
-al="$al mc88000 mc88100 merlin mert mips mvs n16"
-al="$al ncl_el ncl_mr"
-al="$al news1500 news1700 news1800 news1900 news3700"
-al="$al news700 news800 news900 ns16000 ns32000"
-al="$al ns32016 ns32332 ns32k nsc32000 os osf"
-al="$al parisc pc532 pdp11 plexus posix pyr"
-al="$al riscix riscos scs sequent sgi sinix sony sony_news"
-al="$al sonyrisc sparc sparclite spectrum stardent stratos"
-al="$al sun sun3 sun386 svr4 sysV68 sysV88"
-al="$al titan tower tower32 tower32_200 tower32_600 tower32_700"
-al="$al tower32_800 tower32_850 tss u370 u3b u3b2 u3b20 u3b200"
-al="$al u3b20d u3b5 ultrix unix unixpc unos vax venix vms"
-al="$al xenix z8000"
-
: set useposix=false in your hint file to disable the POSIX extension.
useposix=true
: set useopcode=false in your hint file to disable the Opcode extension.
: Try to determine whether config.sh was made on this system
case "$config_sh" in
'')
-myuname=`( ($uname -a) 2>/dev/null || hostname) 2>&1`
+myuname=`$uname -a 2>/dev/null`
+$test -z "$myuname" && myuname=`hostname 2>/dev/null`
# tr '[A-Z]' '[a-z]' would not work in EBCDIC
# because the A-Z/a-z are not consecutive.
myuname=`echo $myuname | $sed -e 's/^[^=]*=//' -e 's/\///g' | \
$test -f /dnix && osname=dnix
$test -f /lynx.os && osname=lynxos
$test -f /unicos && osname=unicos && osvers=`$uname -r`
+ $test -f /unicosmk && osname=unicosmk && osvers=`$uname -r`
$test -f /unicosmk.ar && osname=unicosmk && osvers=`$uname -r`
$test -f /bin/mips && /bin/mips && osname=mips
$test -d /NextApps && set X `hostinfo | grep 'NeXT Mach.*:' | \
cat <<EOM
-Perl can be built to take advantage of threads, on some systems.
+Perl can be built to take advantage of threads on some systems.
To do so, Configure must be run with -Dusethreads.
Note that threading is a highly experimental feature, and
(ithreads) that has one interpreter per thread. Both are very
experimental. This arrangement exists to help developers work out
which one is better.
+
+If you're a casual user, you probably don't want interpreter-threads
+at this time. There doesn't yet exist a way to create threads from
+within Perl in this model, i.e., "use Thread;" will NOT work.
EOM
: Default to ithreads unless overridden on command line or with
: old config.sh
case "$gccversion" in
'') echo "You are not using GNU cc." ;;
*) echo "You are using GNU cc $gccversion."
- echo "Adding -D_GNU_SOURCE to ccflags."
- ccflags="$ccflags -D_GNU_SOURCE" # expose glibc interfaces
;;
esac
else
$cat <<EOM
On some systems, shared libraries may be available. Answer 'none' if
-you want to suppress searching of shared libraries for the remaining
+you want to suppress searching of shared libraries for the remainder
of this configuration.
EOM
esac
for thislib in $libswanted; do
- if xxx=`./loc lib$thislib.$so.[0-9]'*' X $libpth`;
- $test -f "$xxx" -a "X$ignore_versioned_solibs" = "X"; then
- echo "Found -l$thislib (shared)."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
+ libname="$thislib"
+ if xxx=`./loc lib$thislib.$so.[0-9]'*' X $libpth`
+ $test -f "$xxx" -a "X$ignore_versioned_solibs" = "X" ; then
+ libstyle=shared
elif xxx=`./loc lib$thislib.$so X $libpth` ; $test -f "$xxx"; then
- echo "Found -l$thislib (shared)."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
+ libstyle=shared
elif xxx=`./loc lib$thislib$_a X $libpth`; $test -f "$xxx"; then
- echo "Found -l$thislib."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
+ libstyle=static
elif xxx=`./loc $thislib$_a X $libpth`; $test -f "$xxx"; then
- echo "Found -l$thislib."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
+ libstyle=static
elif xxx=`./loc lib${thislib}_s$_a X $libpth`; $test -f "$xxx"; then
- echo "Found -l${thislib}_s."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l${thislib}_s";;
- esac
+ libstyle=static
+ libname=${thislib}_s
elif xxx=`./loc Slib$thislib$_a X $xlibpth`; $test -f "$xxx"; then
- echo "Found -l$thislib."
+ libstyle="static"
+ fi
+ if $test -f "$xxx"; then
+ eval $libscheck
+ fi
+ if $test -f "$xxx"; then
+ case "$libstyle" in
+ shared) echo "Found -l$libname (shared)." ;;
+ static) echo "Found -l$libname." ;;
+ *) echo "Found -l$libname ($libstyle)." ;;
+ esac
case " $dflt " in
*"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
+ *) dflt="$dflt -l$libname"
+ libsfound="$libsfound $xxx"
+ yyy=`basename $xxx`
+ libsfiles="$libsfiles $yyy"
+ yyy=`echo $xxx|sed "s@/$yyy\\$@@"`
+ case " $libsdirs " in
+ *" $yyy "*) ;;
+ *) libsdirs="$libsdirs $yyy" ;;
+ esac
+ ;;
esac
else
echo "No -l$thislib."
test 0 -eq "$subversion" || $echo $n " subversion $subversion" $c
echo ".)"
case "$osname" in
-dos|cygwin|vms|win32)
+dos|vms)
: XXX Should be a Configure test for double-dots in filenames.
version=`echo $baserev $patchlevel $subversion | \
$awk '{ printf "%d_%d_%d\n", $1, $2, $3 }'`
;@candidates = ();
}
+# XXX ToDo: These comparisons must be reworked when two-digit
+# subversions come along, so that 5.7.10 compares as greater than
+# 5.7.3! By that time, hope that 5.6.x is sufficiently
+# widespread that we can use the built-in version vectors rather
+# than reinventing them here. For 5.6.0, however, we must
+# assume this script will likely be run by 5.005_0x. --AD 1/2000.
foreach $d (@candidates) {
if ($d lt $version) {
if ($d ge $api_versionstring) {
}
if (@inc_version_list) {
- print '"';
- print join('", "', @inc_version_list);
- print '"';
+ print join(' ', @inc_version_list);
}
else {
# Blank space to preserve value for next Configure run.
'') if test -x $perl; then
dflt=`$perl getverlist`
else
- dflt=''
+ dflt='none'
fi
;;
+$undef) dflt='none' ;;
*) dflt="$inc_version_list" ;;
esac
$cat <<'EOM'
versions of perl that were installed under $prefix. Specify here
the list of earlier versions that this version of perl should check.
If Configure detected no earlier versions of perl installed under
-$prefix, then the list will be empty.
+$prefix, then the list will be empty. Answer 'none' to tell perl
+to not search earlier versions.
The default should almost always be sensible, so if you're not sure,
just accept the default.
EOM
-rp='list of earlier versions to include in @INC?'
+rp='List of earlier versions to include in @INC?'
. ./myread
-inc_version_list="$ans"
+case "$ans" in
+[Nn]one) inc_version_list=' ' ;;
+*) inc_version_list="$ans" ;;
+esac
+case "$inc_version_list" in
+''|' ')
+ inc_version_list_init='0';;
+*) inc_version_list_init=`echo $inc_version_list |
+ $sed -e 's/^/"/' -e 's/ /","/g' -e 's/$/",0/'`
+ ;;
+esac
$rm -f getverlist
: determine whether to install perl also as /usr/bin/perl
' ') dflt='none' ;;
*) dflt="$ccdlflags" ;;
esac
- rp="Any special flags to pass to $cc to use dynamic loading?"
+ rp="Any special flags to pass to $cc to use dynamic linking?"
. ./myread
case "$ans" in
none) ccdlflags=' ' ;;
I need to get your e-mail address in Internet format if possible, i.e.
something like user@host.domain. Please answer accurately since I have
no easy means to double check it. The default value provided below
-is most probably close to the reality but may not be valid from outside
+is most probably close to reality but may not be valid from outside
your organization...
EOM
installsitebin="$sitebinexp"
fi
+: see if sqrtl exists
+set sqrtl d_sqrtl
+eval $inlibc
+
cat <<EOM
Perl can be built to take advantage of long doubles which
;;
esac
+case "$uselongdouble:$d_sqrtl" in
+$define:$undef)
+ $cat <<EOM >&4
+
+You requested the use of long doubles but you do not seem to have
+the mathematic functions for long doubles. I'm disabling the use
+of long doubles.
+EOM
+ uselongdouble=$undef
+ ;;
+esac
+
cat <<EOM
Perl can be built to take advantage of long longs which
esac
case "$uselonglong" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
+'') dflt='y';;
esac
rp='Try to use long longs if available?'
. ./myread
#include <stdio.h>
+#define I_STDLIB $i_stdlib
#ifdef I_STDLIB
#include <stdlib.h>
#endif
set fseeko d_fseeko
eval $inlibc
case "$longsize" in
-8) echo "(Your long is 64 bits, so in a pinch you could use fseek.)" ;;
+8) echo "(Your long is 64 bits, so you could use fseek.)" ;;
esac
: see if fsetpos exists
set ftello d_ftello
eval $inlibc
case "$longsize" in
-8) echo "(Your long is 64 bits, so in a pinch you could use ftell.)" ;;
+8) echo "(Your long is 64 bits, so you could use ftell.)" ;;
esac
+: see if getcwd exists
+set getcwd d_getcwd
+eval $inlibc
+
: see if getgrent exists
set getgrent d_getgrent
eval $inlibc
set d_htonl
eval $setvar
+: see if iconv exists
+set iconv d_iconv
+eval $inlibc
+
: index or strchr
echo " "
if set index val -f; eval $csym; $val; then
set inet_aton d_inetaton
eval $inlibc
+: see if inttypes.h is available
+: we want a real compile instead of Inhdr because some systems
+: have an inttypes.h which includes non-existent headers
+echo " "
+$cat >try.c <<EOCP
+#include <inttypes.h>
+int main() {
+ static int32_t foo32 = 0x12345678;
+}
+EOCP
+set try
+if eval $compile; then
+ echo "<inttypes.h> found." >&4
+ val="$define"
+else
+ echo "<inttypes.h> NOT found." >&4
+ val="$undef"
+fi
+$rm -f try.c try
+set i_inttypes
+eval $setvar
+
+: check for int64_t
+echo " "
+$echo $n "Checking to see if your system supports int64_t...$c" >&4
+$cat >try.c <<EOCP
+#include <sys/types.h>
+#$i_inttypes I_INTTYPES
+#ifdef I_INTTYPES
+#include <inttypes.h>
+#endif
+int main() { int64_t x = 7; }
+EOCP
+set try
+if eval $compile; then
+ val="$define"
+ echo " Yes, it does." >&4
+else
+ val="$undef"
+ echo " No, it doesn't." >&4
+fi
+$rm -f try try.*
+set d_int64t
+eval $setvar
+
: Look for isascii
echo " "
$cat >isascii.c <<'EOCP'
set mkdir d_mkdir
eval $inlibc
+: see if mkdtemp exists
+set mkdtemp d_mkdtemp
+eval $inlibc
+
: see if mkfifo exists
set mkfifo d_mkfifo
eval $inlibc
+: see if mkstemp exists
+set mkstemp d_mkstemp
+eval $inlibc
+
+: see if mkstemps exists
+set mkstemps d_mkstemps
+eval $inlibc
+
: see if mktime exists
set mktime d_mktime
eval $inlibc
+: see if mprotect exists
+set mprotect d_mprotect
+eval $inlibc
+
: see if msgctl exists
set msgctl d_msgctl
eval $inlibc
set d_msg
eval $setvar
+: see if msync exists
+set msync d_msync
+eval $inlibc
+
+: see if munmap exists
+set munmap d_munmap
+eval $inlibc
+
: see if nice exists
set nice d_nice
eval $inlibc
-: see if POSIX threads are available
-set pthread.h i_pthread
-eval $inhdr
+echo " "
+echo "Checking which 64-bit integer type we could use..." >&4
+case "$intsize" in
+8) val=int
+ set quadtype
+ eval $setvar
+ val='"unsigned int"'
+ set uquadtype
+ eval $setvar
+ quadkind=1
+ ;;
+*) case "$longsize" in
+ 8) val=long
+ set quadtype
+ eval $setvar
+ val='"unsigned long"'
+ set uquadtype
+ eval $setvar
+ quadkind=2
+ ;;
+ *) case "$d_longlong:$longlongsize" in
+ define:8)
+ val='"long long"'
+ set quadtype
+ eval $setvar
+ val='"unsigned long long"'
+ set uquadtype
+ eval $setvar
+ quadkind=3
+ ;;
+ *) case "$d_int64t" in
+ define)
+ val=int64_t
+ set quadtype
+ eval $setvar
+ val=uint64_t
+ set uquadtype
+ eval $setvar
+ quadkind=4
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+case "$quadtype" in
+'') case "$uselonglong:$d_longlong:$longlongsize" in
+ undef:define:8)
+ echo "(You would have 'long long', but you are not using it.)" >&4 ;;
+ *) echo "Alas, no 64-bit integer types in sight." >&4 ;;
+ esac
+ d_quad="$undef"
+ ;;
+*) if test X"$use64bits" = Xdefine -o X"$longsize" = X8; then
+ verb="will"
+ else
+ verb="could"
+ fi
+ echo "We $verb use '$quadtype' for 64-bit integers." >&4
+ d_quad="$define"
+ ;;
+esac
-: how to create joinable pthreads
-if test "X$usethreads" = "X$define" -a "X$i_pthread" = "X$define"; then
- echo " "
- echo "Checking what constant to use for creating joinable pthreads..." >&4
+: check for length of character
+echo " "
+case "$charsize" in
+'')
+ echo "Checking to see how big your characters are (hey, you never know)..." >&4
$cat >try.c <<'EOCP'
-#include <pthread.h>
-int main() {
- int detachstate = JOINABLE;
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", (int)sizeof(char));
+ exit(0);
}
EOCP
- set try -DJOINABLE=PTHREAD_CREATE_JOINABLE
- if eval $compile; then
- echo "You seem to use PTHREAD_CREATE_JOINABLE." >&4
- val="$undef" # Yes, undef.
- set d_old_pthread_create_joinable
- eval $setvar
- val=""
- set old_pthread_create_joinable
- eval $setvar
+ set try
+ if eval $compile_ok; then
+ dflt=`./try`
else
- set try -DJOINABLE=PTHREAD_CREATE_UNDETACHED
- if eval $compile; then
- echo "You seem to use PTHREAD_CREATE_UNDETACHED." >&4
- val="$define"
- set d_old_pthread_create_joinable
- eval $setvar
- val=PTHREAD_CREATE_UNDETACHED
- set old_pthread_create_joinable
- eval $setvar
- else
- set try -DJOINABLE=__UNDETACHED
- if eval $compile; then
- echo "You seem to use __UNDETACHED." >&4
- val="$define"
- set d_old_pthread_create_joinable
- eval $setvar
- val=__UNDETACHED
- set old_pthread_create_joinable
- eval $setvar
- else
- echo "Egads, nothing obvious found. Guessing that you use 0." >&4
- val="$define"
- set d_old_pthread_create_joinable
- eval $setvar
- val=0
- set old_pthread_create_joinable
- eval $setvar
- fi
- fi
+ dflt='1'
+ echo "(I can't seem to compile the test program. Guessing...)"
fi
- $rm -f try try.*
-else
- d_old_pthread_create_joinable="$undef"
- old_pthread_create_joinable=""
-fi
-
-: see if pause exists
-set pause d_pause
-eval $inlibc
-
-: see if pipe exists
-set pipe d_pipe
-eval $inlibc
+ ;;
+*)
+ dflt="$charsize"
+ ;;
+esac
+rp="What is the size of a character (in bytes)?"
+. ./myread
+charsize="$ans"
+$rm -f try.c try
-: see if poll exists
-set poll d_poll
-eval $inlibc
+echo " "
+$echo "Choosing the C types to be used for Perl's internal types..." >&4
-: see whether the various POSIXish _yields exist
-$cat >try.c <<EOP
-#include <pthread.h>
-#include <stdio.h>
-int main() {
+case "$use64bits:$d_quad:$quadtype" in
+define:define:?*)
+ ivtype="$quadtype"
+ uvtype="$uquadtype"
+ ivsize=8
+ uvsize=8
+ ;;
+*) ivtype="long"
+ uvtype="unsigned long"
+ ivsize=$longsize
+ uvsize=$longsize
+ ;;
+esac
+
+case "$uselongdouble:$d_longdbl" in
+define:define)
+ nvtype="long double"
+ nvsize=$longdblsize
+ ;;
+*) nvtype=double
+ nvsize=$doublesize
+ ;;
+esac
+
+$echo "(IV will be "$ivtype", $ivsize bytes)"
+$echo "(UV will be "$uvtype", $uvsize bytes)"
+$echo "(NV will be "$nvtype", $nvsize bytes)"
+
+$cat >try.c <<EOCP
+#$i_inttypes I_INTTYPES
+#ifdef I_INTTYPES
+#include <inttypes.h>
+#endif
+#include <stdio.h>
+int main() {
+#ifdef INT8
+ int8_t i = INT8_MAX;
+ uint8_t u = UINT8_MAX;
+ printf("int8_t\n");
+#endif
+#ifdef INT16
+ int16_t i = INT16_MAX;
+ uint16_t i = UINT16_MAX;
+ printf("int16_t\n");
+#endif
+#ifdef INT32
+ int32_t i = INT32_MAX;
+ uint32_t u = UINT32_MAX;
+ printf("int32_t\n");
+#endif
+}
+EOCP
+
+case "$i8type" in
+'') case "$charsize" in
+ 1) i8type=char
+ u8type="unsigned char"
+ i8size=$charsize
+ u8size=$charsize
+ ;;
+ esac
+ ;;
+esac
+case "$i8type" in
+'') set try -DINT8
+ if eval $compile; then
+ case "`./try$exe_ext`" in
+ int8_t) i8type=int8_t
+ u8type=uint8_t
+ i8size=1
+ u8size=1
+ ;;
+ esac
+ fi
+ ;;
+esac
+case "$i8type" in
+'') if $test $charsize -ge 1; then
+ i8type=char
+ u8type="unsigned char"
+ i8size=$charsize
+ u8size=$charsize
+ fi
+ ;;
+esac
+
+case "$i16type" in
+'') case "$shortsize" in
+ 2) i16type=short
+ u16type="unsigned short"
+ i16size=$shortsize
+ u16size=$shortsize
+ ;;
+ esac
+ ;;
+esac
+case "$i16type" in
+'') set try -DINT16
+ if eval $compile; then
+ case "`./try$exe_ext`" in
+ int16_t)
+ i16type=int16_t
+ u16type=uint16_t
+ i16size=2
+ u16size=2
+ ;;
+ esac
+ fi
+ ;;
+esac
+case "$i16type" in
+'') if $test $shortsize -ge 2; then
+ i16type=short
+ u16type="unsigned short"
+ i16size=$shortsize
+ u16size=$shortsize
+ fi
+ ;;
+esac
+
+case "$i32type" in
+'') case "$longsize" in
+ 4) i32type=long
+ u32type="unsigned long"
+ i32size=$longsize
+ u32size=$longsize
+ ;;
+ *) case "$intsize" in
+ 4) i32type=int
+ u32type="unsigned int"
+ i32size=$intsize
+ u32size=$intsize
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+case "$i32type" in
+'') set try -DINT32
+ if eval $compile; then
+ case "`./try$exe_ext`" in
+ int32_t)
+ i32type=int32_t
+ u32type=uint32_t
+ i32size=4
+ u32size=4
+ ;;
+ esac
+ fi
+ ;;
+esac
+case "$i32type" in
+'') if $test $intsize -ge 4; then
+ i32type=int
+ u32type="unsigned int"
+ i32size=$intsize
+ u32size=$intsize
+ fi
+ ;;
+esac
+
+case "$i64type" in
+'') case "$d_quad:$quadtype" in
+ define:?*)
+ i64type="$quadtype"
+ u64type="$uquadtype"
+ i64size=8
+ u64size=8
+ ;;
+ esac
+ ;;
+esac
+
+$echo "Checking whether your NVs can preserve your UVs..." >&4
+$cat <<EOP >try.c
+#include <stdio.h>
+int main() {
+ $uvtype k = ($uvtype)~0, l;
+ $nvtype d;
+ l = k;
+ d = ($nvtype)l;
+ l = ($uvtype)d;
+ if (l == k)
+ printf("preserve\n");
+ exit(0);
+}
+EOP
+set try
+if eval $compile; then
+ case "`./try$exe_ext`" in
+ preserve) d_nv_preserves_uv="$define" ;;
+ esac
+fi
+case "$d_nv_preserves_uv" in
+$define) $echo "Yes, they can." 2>&1 ;;
+*) $echo "No, they can't." 2>&1
+ d_nv_preserves_uv="$undef"
+ ;;
+esac
+
+$rm -f try.* try
+
+: see if POSIX threads are available
+set pthread.h i_pthread
+eval $inhdr
+
+
+
+
+: how to create joinable pthreads
+if test "X$usethreads" = "X$define" -a "X$i_pthread" = "X$define"; then
+ echo " "
+ echo "Checking what constant to use for creating joinable pthreads..." >&4
+ $cat >try.c <<'EOCP'
+#include <pthread.h>
+int main() {
+ int detachstate = JOINABLE;
+}
+EOCP
+ set try -DJOINABLE=PTHREAD_CREATE_JOINABLE
+ if eval $compile; then
+ echo "You seem to use PTHREAD_CREATE_JOINABLE." >&4
+ val="$undef" # Yes, undef.
+ set d_old_pthread_create_joinable
+ eval $setvar
+ val=""
+ set old_pthread_create_joinable
+ eval $setvar
+ else
+ set try -DJOINABLE=PTHREAD_CREATE_UNDETACHED
+ if eval $compile; then
+ echo "You seem to use PTHREAD_CREATE_UNDETACHED." >&4
+ val="$define"
+ set d_old_pthread_create_joinable
+ eval $setvar
+ val=PTHREAD_CREATE_UNDETACHED
+ set old_pthread_create_joinable
+ eval $setvar
+ else
+ set try -DJOINABLE=__UNDETACHED
+ if eval $compile; then
+ echo "You seem to use __UNDETACHED." >&4
+ val="$define"
+ set d_old_pthread_create_joinable
+ eval $setvar
+ val=__UNDETACHED
+ set old_pthread_create_joinable
+ eval $setvar
+ else
+ echo "Egads, nothing obvious found. Guessing that you use 0." >&4
+ val="$define"
+ set d_old_pthread_create_joinable
+ eval $setvar
+ val=0
+ set old_pthread_create_joinable
+ eval $setvar
+ fi
+ fi
+ fi
+ $rm -f try try.*
+else
+ d_old_pthread_create_joinable="$undef"
+ old_pthread_create_joinable=""
+fi
+
+: see if pause exists
+set pause d_pause
+eval $inlibc
+
+: see if pipe exists
+set pipe d_pipe
+eval $inlibc
+
+: see if poll exists
+set poll d_poll
+eval $inlibc
+
+
+: see whether the various POSIXish _yields exist
+$cat >try.c <<EOP
+#include <pthread.h>
+#include <stdio.h>
+int main() {
#ifdef SCHED_YIELD
sched_yield();
#else
if $contains 'pw_gecos' $$.h >/dev/null 2>&1; then
val="$define"
else
- val="$undef"
- fi
- set d_pwgecos
- eval $setvar
-
- if $contains 'pw_passwd' $$.h >/dev/null 2>&1; then
- val="$define"
- else
- val="$undef"
- fi
- set d_pwpasswd
- eval $setvar
-
- $rm -f $$.h
- ;;
-*)
- val="$undef";
- set d_pwquota; eval $setvar
- set d_pwage; eval $setvar
- set d_pwchange; eval $setvar
- set d_pwclass; eval $setvar
- set d_pwexpire; eval $setvar
- set d_pwcomment; eval $setvar
- set d_pwgecos; eval $setvar
- set d_pwpasswd; eval $setvar
- ;;
-esac
-
-: see if inttypes.h is available
-: we want a real compile instead of Inhdr because some systems
-: have an inttypes.h which includes non-existent headers
-echo " "
-$cat >try.c <<EOCP
-#include <inttypes.h>
-int main() {
- static int32_t foo32 = 0x12345678;
-}
-EOCP
-set try
-if eval $compile; then
- echo "<inttypes.h> found." >&4
- val="$define"
-else
- echo "<inttypes.h> NOT found." >&4
- val="$undef"
-fi
-$rm -f try.c try
-set i_inttypes
-eval $setvar
-
-: check for int64_t
-echo " "
-$echo $n "Checking to see if your system supports int64_t...$c" >&4
-$cat >try.c <<EOCP
-#include <sys/types.h>
-#$i_inttypes I_INTTYPES
-#ifdef I_INTTYPES
-#include <inttypes.h>
-#endif
-int main() { int64_t x = 7; }
-EOCP
-set try
-if eval $compile; then
- val="$define"
- echo " Yes, it does." >&4
-else
- val="$undef"
- echo " No, it doesn't." >&4
-fi
-$rm -f try try.*
-set d_int64t
-eval $setvar
-
-
-echo " "
-echo "Checking which 64-bit integer type we could use..." >&4
-
-case "$intsize" in
-8) val=int
- set quadtype
- eval $setvar
- val='"unsigned int"'
- set uquadtype
- eval $setvar
- quadkind=1
- ;;
-*) case "$longsize" in
- 8) val=long
- set quadtype
- eval $setvar
- val='"unsigned long"'
- set uquadtype
- eval $setvar
- quadkind=2
- ;;
- *) case "$uselonglong:$d_longlong:$longlongsize" in
- define:define:8)
- val='"long long"'
- set quadtype
- eval $setvar
- val='"unsigned long long"'
- set uquadtype
- eval $setvar
- quadkind=3
- ;;
- *) case "$d_int64t" in
- define)
- val=int64_t
- set quadtype
- eval $setvar
- val=uint64_t
- set uquadtype
- eval $setvar
- quadkind=4
- ;;
- esac
- ;;
- esac
- ;;
- esac
- ;;
-esac
+ val="$undef"
+ fi
+ set d_pwgecos
+ eval $setvar
-case "$quadtype" in
-'') case "$uselonglong:$d_longlong:$longlongsize" in
- undef:define:8)
- echo "(You would have 'long long', but you are not using it.)" >&4 ;;
- *) echo "Alas, no 64-bit integer types in sight." >&4 ;;
- esac
- d_quad="$undef"
- ;;
-*) if test X"$use64bits" = Xdefine -o X"$longsize" = X8; then
- verb="will"
+ if $contains 'pw_passwd' $$.h >/dev/null 2>&1; then
+ val="$define"
else
- verb="could"
+ val="$undef"
fi
- echo "We $verb use '$quadtype' for 64-bit integers." >&4
- d_quad="$define"
+ set d_pwpasswd
+ eval $setvar
+
+ $rm -f $$.h
+ ;;
+*)
+ val="$undef";
+ set d_pwquota; eval $setvar
+ set d_pwage; eval $setvar
+ set d_pwchange; eval $setvar
+ set d_pwclass; eval $setvar
+ set d_pwexpire; eval $setvar
+ set d_pwcomment; eval $setvar
+ set d_pwgecos; eval $setvar
+ set d_pwpasswd; eval $setvar
;;
esac
eval $setvar
$rm -f try.c try
-: see if sqrtl exists
-set sqrtl d_sqrtl
-eval $inlibc
-
: see if sys/stat.h is available
set sys/stat.h i_sysstat
eval $inhdr
;;
*) $cat >&4 <<EOM
Cannot figure out whether flushing stdio streams explicitly works or not.
-I'm assuming it doesn't.
-EOM
- fflushall="$undef"
- ;;
- esac
- ;;
- "$define"|true|[yY]*)
- fflushall="$define"
- ;;
- *)
- fflushall="$undef"
- ;;
- esac
- ;;
-*) fflushall="$undef"
- ;;
-esac
-case "$fflushNULL$fflushall" in
-undefundef)
- $cat <<EOM
-I cannot figure out how to flush pending stdio output.
-EOM
- ;;
-esac
-$rm -f try.* try$exe_ext
-
-: Store the full pathname to the ar program for use in the C program
-: Respect a hint or command line value for full_ar.
-case "$full_ar" in
-'') full_ar=$ar ;;
-esac
-
-: Store the full pathname to the sed program for use in the C program
-full_sed=$sed
-
-: see what type gids are declared as in the kernel
-echo " "
-echo "Looking for the type for group ids returned by getgid()."
-set gid_t gidtype xxx stdio.h sys/types.h
-eval $typedef
-case "$gidtype" in
-xxx)
- xxx=`./findhdr sys/user.h`
- set `grep 'groups\[NGROUPS\];' "$xxx" 2>/dev/null` unsigned short
- case $1 in
- unsigned) dflt="$1 $2" ;;
- *) dflt="$1" ;;
- esac
- ;;
-*) dflt="$gidtype";;
-esac
-case "$gidtype" in
-gid_t) echo "gid_t found." ;;
-*) rp="What is the type for group ids returned by getgid()?"
- . ./myread
- gidtype="$ans"
- ;;
-esac
-
-echo " "
-case "$gidtype" in
-*_t) zzz="$gidtype" ;;
-*) zzz="gid" ;;
-esac
-echo "Checking the size of $zzz..." >&4
-cat > try.c <<EOCP
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- printf("%d\n", (int)sizeof($gidtype));
- exit(0);
-}
-EOCP
-set try
-if eval $compile_ok; then
- yyy=`./try`
- case "$yyy" in
- '') gidsize=4
- echo "(I can't execute the test program--guessing $gidsize.)" >&4
- ;;
- *) gidsize=$yyy
- echo "Your $zzz size is $gidsize bytes."
- ;;
- esac
-else
- gidsize=4
- echo "(I can't compile the test program--guessing $gidsize.)" >&4
-fi
-
-
-echo " "
-case "$gidtype" in
-*_t) zzz="$gidtype" ;;
-*) zzz="gid" ;;
-esac
-echo "Checking the sign of $zzz..." >&4
-cat > try.c <<EOCP
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- $gidtype foo = -1;
- if (foo < 0)
- printf("-1\n");
- else
- printf("1\n");
-}
-EOCP
-set try
-if eval $compile; then
- yyy=`./try`
- case "$yyy" in
- '') gidsign=1
- echo "(I can't execute the test program--guessing unsigned.)" >&4
- ;;
- *) gidsign=$yyy
- case "$gidsign" in
- 1) echo "Your $zzz is unsigned." ;;
- -1) echo "Your $zzz is signed." ;;
- esac
- ;;
- esac
-else
- gidsign=1
- echo "(I can't compile the test program--guessing unsigned.)" >&4
-fi
-
-
-: check for length of character
-echo " "
-case "$charsize" in
-'')
- echo "Checking to see how big your characters are (hey, you never know)..." >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", (int)sizeof(char));
- exit(0);
-}
-EOCP
- set try
- if eval $compile_ok; then
- dflt=`./try`
- else
- dflt='1'
- echo "(I can't seem to compile the test program. Guessing...)"
- fi
- ;;
-*)
- dflt="$charsize"
- ;;
-esac
-rp="What is the size of a character (in bytes)?"
-. ./myread
-charsize="$ans"
-$rm -f try.c try
-
-
-echo " "
-$echo "Choosing the C types to be used for Perl's internal types..." >&4
-
-case "$use64bits:$d_quad:$quadtype" in
-define:define:?*)
- ivtype="$quadtype"
- uvtype="$uquadtype"
- ivsize=8
- uvsize=8
- ;;
-*) ivtype="long"
- uvtype="unsigned long"
- ivsize=$longsize
- uvsize=$longsize
- ;;
-esac
-
-case "$uselongdouble:$d_longdbl" in
-define:define)
- nvtype="long double"
- nvsize=$longdblsize
- ;;
-*) nvtype=double
- nvsize=$doublesize
- ;;
-esac
-
-echo "(IV will be "$ivtype", $ivsize bytes)"
-echo "(UV will be "$uvtype", $uvsize bytes)"
-echo "(NV will be "$nvtype", $nvsize bytes)"
-
-$cat >try.c <<EOCP
-#$i_inttypes I_INTTYPES
-#ifdef I_INTTYPES
-#include <inttypes.h>
-#endif
-#include <stdio.h>
-int main() {
-#ifdef INT8
- int8_t i = INT8_MAX;
- uint8_t u = UINT8_MAX;
- printf("int8_t\n");
-#endif
-#ifdef INT16
- int16_t i = INT16_MAX;
- uint16_t i = UINT16_MAX;
- printf("int16_t\n");
-#endif
-#ifdef INT32
- int32_t i = INT32_MAX;
- uint32_t u = UINT32_MAX;
- printf("int32_t\n");
-#endif
-}
-EOCP
-
-case "$i8type" in
-'') case "$charsize" in
- 1) i8type=char
- u8type="unsigned char"
- i8size=$charsize
- u8size=$charsize
+I'm assuming it doesn't.
+EOM
+ fflushall="$undef"
+ ;;
+ esac
+ ;;
+ "$define"|true|[yY]*)
+ fflushall="$define"
+ ;;
+ *)
+ fflushall="$undef"
;;
esac
;;
-esac
-case "$i8type" in
-'') set try -DINT8
- if eval $compile; then
- case "`./try$exe_ext`" in
- int8_t) i8type=int8_t
- u8type=uint8_t
- i8size=1
- u8size=1
- ;;
- esac
- fi
+*) fflushall="$undef"
;;
esac
-case "$i8type" in
-'') if $test $charsize -ge 1; then
- i8type=char
- u8type="unsigned char"
- i8size=$charsize
- u8size=$charsize
- fi
+case "$fflushNULL$fflushall" in
+undefundef)
+ $cat <<EOM
+I cannot figure out how to flush pending stdio output.
+EOM
;;
esac
+$rm -f try.* try$exe_ext
-case "$i16type" in
-'') case "$shortsize" in
- 2) i16type=short
- u16type="unsigned short"
- i16size=$shortsize
- u16size=$shortsize
- ;;
- esac
- ;;
+: Store the full pathname to the ar program for use in the C program
+: Respect a hint or command line value for full_ar.
+case "$full_ar" in
+'') full_ar=$ar ;;
esac
-case "$i16type" in
-'') set try -DINT16
- if eval $compile; then
- case "`./try$exe_ext`" in
- int16_t)
- i16type=int16_t
- u16type=uint16_t
- i16size=2
- u16size=2
- ;;
- esac
- fi
+
+: Store the full pathname to the sed program for use in the C program
+full_sed=$sed
+
+: see what type gids are declared as in the kernel
+echo " "
+echo "Looking for the type for group ids returned by getgid()."
+set gid_t gidtype xxx stdio.h sys/types.h
+eval $typedef
+case "$gidtype" in
+xxx)
+ xxx=`./findhdr sys/user.h`
+ set `grep 'groups\[NGROUPS\];' "$xxx" 2>/dev/null` unsigned short
+ case $1 in
+ unsigned) dflt="$1 $2" ;;
+ *) dflt="$1" ;;
+ esac
;;
+*) dflt="$gidtype";;
esac
-case "$i16type" in
-'') if $test $shortsize -ge 2; then
- i16type=short
- u16type="unsigned short"
- i16size=$shortsize
- u16size=$shortsize
- fi
+case "$gidtype" in
+gid_t) echo "gid_t found." ;;
+*) rp="What is the type for group ids returned by getgid()?"
+ . ./myread
+ gidtype="$ans"
;;
esac
-case "$i32type" in
-'') case "$longsize" in
- 4) i32type=long
- u32type="unsigned long"
- i32size=$longsize
- u32size=$longsize
+echo " "
+case "$gidtype" in
+*_t) zzz="$gidtype" ;;
+*) zzz="gid" ;;
+esac
+echo "Checking the size of $zzz..." >&4
+cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ printf("%d\n", (int)sizeof($gidtype));
+ exit(0);
+}
+EOCP
+set try
+if eval $compile_ok; then
+ yyy=`./try`
+ case "$yyy" in
+ '') gidsize=4
+ echo "(I can't execute the test program--guessing $gidsize.)" >&4
;;
- *) case "$intsize" in
- 4) i32type=int
- u32type="unsigned int"
- i32size=$intsize
- u32size=$intsize
- ;;
- esac
+ *) gidsize=$yyy
+ echo "Your $zzz size is $gidsize bytes."
;;
esac
- ;;
+else
+ gidsize=4
+ echo "(I can't compile the test program--guessing $gidsize.)" >&4
+fi
+
+
+echo " "
+case "$gidtype" in
+*_t) zzz="$gidtype" ;;
+*) zzz="gid" ;;
esac
-case "$i32type" in
-'') set try -DINT32
- if eval $compile; then
- case "`./try$exe_ext`" in
- int32_t)
- i32type=int32_t
- u32type=uint32_t
- i32size=4
- u32size=4
- ;;
+echo "Checking the sign of $zzz..." >&4
+cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ $gidtype foo = -1;
+ if (foo < 0)
+ printf("-1\n");
+ else
+ printf("1\n");
+}
+EOCP
+set try
+if eval $compile; then
+ yyy=`./try`
+ case "$yyy" in
+ '') gidsign=1
+ echo "(I can't execute the test program--guessing unsigned.)" >&4
+ ;;
+ *) gidsign=$yyy
+ case "$gidsign" in
+ 1) echo "Your $zzz is unsigned." ;;
+ -1) echo "Your $zzz is signed." ;;
esac
- fi
- ;;
-esac
-case "$i32type" in
-'') if $test $intsize -ge 4; then
- i32type=int
- u32type="unsigned int"
- i32size=$intsize
- u32size=$intsize
- fi
- ;;
-esac
-
-case "$i64type" in
-'') case "$d_quad:$quadtype" in
- define:?*)
- i64type="$quadtype"
- u64type="$uquadtype"
- i64size=8
- u64size=8
;;
esac
- ;;
-esac
+else
+ gidsign=1
+ echo "(I can't compile the test program--guessing unsigned.)" >&4
+fi
-$rm -f try.* try
echo " "
fi
fi
-if $test X"$sPRId64" = X -a X"$i_inttypes.h" = X"$define" -a X"$quadtype" = Xint64_t; then
+if $test X"$sPRId64" = X -a X"$i_inttypes" = X"$define" -a X"$quadtype" = Xint64_t; then
$cat >try.c <<'EOCP'
#include <sys/types.h>
#include <inttypes.h>
*) echo "Nope, it doesn't.";;
esac
+: see if this is a sys/mman.h system
+set sys/mman.h i_sysmman
+eval $inhdr
+
+: see if mmap exists
+set mmap d_mmap
+eval $inlibc
+: see what shmat returns
+: default to something harmless
+mmaptype='void *'
+case "$i_sysmman$d_mmap" in
+"$define$define")
+ $cat >mmap.c <<'END'
+#include <sys/mman.h>
+void *mmap();
+END
+ if $cc $ccflags -c mmap.c >/dev/null 2>&1; then
+ mmaptype='void *'
+ else
+ mmaptype='caddr_t'
+ fi
+ echo "and it returns ($mmaptype)." >&4
+ ;;
+esac
+
+
+
: see what type is used for mode_t
rp="What is the type used for file modes for system calls (e.g. fchmod())?"
set mode_t modetype int stdio.h sys/types.h
set pid_t pidtype int stdio.h sys/types.h
eval $typedef_ask
+: Find earliest binary compatible site_perl subdirectory perl can use.
+case "$bincompat5005" in
+"$define") xs_apiversion='5.005' ;;
+*) xs_apiversion=$version ;; # The current site_perl version.
+esac
+: Find earliest pure perl site_perl subdirectory perl can use.
+: The versioned directories started at 5.005.
+pm_apiversion='5.005'
+
: check for length of pointer
echo " "
case "$ptrsize" in
case "$selecttype" in
'') case "$d_select" in
$define)
+ echo " "
$cat <<EOM
Checking to see what type of arguments are accepted by select().
EOM
set i_fcntl
eval $setvar
+: see if this is a iconv.h system
+set iconv.h i_iconv
+eval $inhdr
+
: see if locale.h is available
set locale.h i_locale
eval $inhdr
set poll.h i_poll
eval $inhdr
-: get C preprocessor symbols handy
echo " "
-$echo $n "Hmm... $c"
-echo $al | $tr ' ' $trnl >Cppsym.know
-$cat <<EOSS >Cppsym
+$echo "Guessing which symbols your C compiler and preprocessor define..." >&4
+$cat <<'EOSH' > Cppsym.know
+a29k ABI64 aegis AES_SOURCE AIX AIX32 AIX370
+AIX41 AIX42 AIX43 AIX_SOURCE aixpc ALL_SOURCE
+alliant alpha am29000 AM29000 amiga AMIGAOS AMIX
+ansi ANSI_C_SOURCE apollo ardent atarist att386 att3b BeOS
+BIG_ENDIAN BIT_MSF bsd BSD bsd43 bsd4_2 bsd4_3 BSD4_3 bsd4_4
+BSD_4_3 BSD_4_4 BSD_NET2 BSD_TIME BSD_TYPES BSDCOMPAT bsdi
+bull c cadmus clipper CMU COFF COMPILER_VERSION
+concurrent convex cpu cray CRAY CRAYMPP ctix CX_UX
+CYGWIN DGUX DGUX_SOURCE DJGPP dmert DOLPHIN DPX2 DSO
+Dynix DynixPTX ELF encore EPI EXTENSIONS FILE_OFFSET_BITS
+FreeBSD GCC_NEW_VARARGS gcos gcx gimpel
+GNU_SOURCE GNUC GNUC_MINOR GO32 gould GOULD_PN
+H3050R H3050RX hbullx20 hcx host_mips
+hp200 hp300 hp700 HP700 hp800 hp9000
+hp9000s200 hp9000s300 hp9000s400 hp9000s500
+hp9000s700 hp9000s800 hp9k8 hp_osf hppa hpux HPUX_SOURCE
+i186 i286 i386 i486 i586 i686 i8086 i80960 i860 I960
+iAPX286 ibm ibm032 ibmesa IBMR2 ibmrt ILP32 ILP64
+INLINE_INTRINSICS INTRINSICS INT64 interdata is68k ksr1
+LANGUAGE_C LARGE_FILE_API LARGEFILE64_SOURCE
+LARGEFILE_SOURCE LFS64_LARGEFILE LFS_LARGEFILE
+Linux LITTLE_ENDIAN LONG64 LONG_DOUBLE LONG_LONG
+LONGDOUBLE LONGLONG LP64 luna luna88k Lynx
+M68000 m68k m88100 m88k M88KBCS_TARGET M_COFF
+M_I186 M_I286 M_I386 M_I8086 M_I86 M_I86SM M_SYS3
+M_SYS5 M_SYSIII M_SYSV M_UNIX M_XENIX MACH machine MachTen
+MATH_HAS_NO_SIDE_EFFECTS
+mc300 mc500 mc68000 mc68010 mc68020 mc68030 mc68040
+mc68060 mc68k mc68k32 mc700 mc88000 mc88100 merlin
+mert MiNT mips MIPS_FPSET MIPS_ISA MIPS_SIM MIPS_SZINT
+MIPS_SZLONG MIPS_SZPTR MIPSEB MIPSEL MODERN_C motorola
+mpeix MSDOS MTXINU MULTIMAX mvs MVS n16 ncl_el ncl_mr
+NetBSD news1500 news1700 news1800 news1900 news3700
+news700 news800 news900 NeXT NLS ns16000 ns32000
+ns32016 ns32332 ns32k nsc32000
+OCS88 OEMVS OpenBSD os OS2 OS390 osf OSF1 OSF_SOURCE
+pa_risc PA_RISC1_1 PA_RISC2_0 PARAGON parisc
+pc532 pdp11 PGC PIC plexus PORTAR posix
+POSIX1B_SOURCE POSIX2_SOURCE POSIX4_SOURCE
+POSIX_C_SOURCE POSIX_SOURCE POWER
+PROTOTYPES PWB pyr QNX R3000 REENTRANT RES Rhapsody RISC6000
+riscix riscos RT scs SCO sequent sgi SGI_SOURCE sinix
+SIZE_INT SIZE_LONG SIZE_PTR SOCKET_SOURCE SOCKETS_SOURCE
+sony sony_news sonyrisc sparc sparclite spectrum
+stardent stdc STDC_EXT stratos sun sun3 sun386
+Sun386i svr3 svr4 SVR4_2 SVR4_SOURCE svr5
+SX system SYSTYPE_BSD SYSTYPE_BSD43 SYSTYPE_BSD44
+SYSTYPE_SVR4 SYSTYPE_SVR5 SYSTYPE_SYSV SYSV SYSV3 SYSV4 SYSV5
+sysV68 sysV88 Tek4132 Tek4300 titan
+tower tower32 tower32_200 tower32_600 tower32_700
+tower32_800 tower32_850 tss
+u370 u3b u3b2 u3b20 u3b200 u3b20d u3b5
+ultrix UMAXV UnicomPBB UnicomPBD UNICOS UNICOSMK
+unix UNIX95 UNIX99 unixpc unos USGr4 USGr4_2
+Utek UTek UTS UWIN uxpm uxps vax venix VMESA vms xenix Xenix286
+XOPEN_SOURCE XOPEN_SOURCE_EXTENDED XPG2 XPG2_EXTENDED
+XPG3 XPG3_EXTENDED XPG4 XPG4_EXTENDED
+z8000
+EOSH
+# Maybe put other stuff here too.
+cat <<EOSH >>Cppsym.know
+$osname
+EOSH
+./tr '[a-z]' '[A-Z]' < Cppsym.know > Cppsym.a
+./tr '[A-Z]' '[a-z]' < Cppsym.know > Cppsym.b
+$cat Cppsym.a Cppsym.b | $tr ' ' $trnl | sort | uniq > Cppsym.know
+$rm -f Cppsym.a Cppsym.b
+cat <<EOSH > Cppsym
$startsh
-case "\$1" in
--l) list=true
- shift
- ;;
-esac
-unknown=''
-case "\$list\$#" in
-1|2)
- for sym do
- if $contains "^\$1$" Cppsym.true >/dev/null 2>&1; then
- exit 0
- elif $contains "^\$1$" Cppsym.know >/dev/null 2>&1; then
- :
- else
- unknown="\$unknown \$sym"
- fi
- done
- set X \$unknown
- shift
- ;;
-esac
-case \$# in
-0) exit 1;;
-esac
-echo \$* | $tr ' ' '$trnl' | $sed -e 's/\(.*\)/\\
-#ifdef \1\\
-exit 0; _ _ _ _\1\\ \1\\
-#endif\\
-/' >Cppsym\$\$
-echo "exit 1; _ _ _" >>Cppsym\$\$
-$cppstdin $cppminus <Cppsym\$\$ | $grep '^exit [01]; _ _' >Cppsym2\$\$
-case "\$list" in
-true) $awk 'NF > 5 {print substr(\$6,2,100)}' <Cppsym2\$\$ ;;
-*)
- sh Cppsym2\$\$
- status=\$?
- ;;
-esac
-$rm -f Cppsym\$\$ Cppsym2\$\$
-exit \$status
-EOSS
+if $test \$# -gt 0; then
+ echo \$* | $tr " " "$trnl" | ./Cppsym.try > Cppsym.got
+ if $test -s Cppsym.got; then
+ $rm -f Cppsym.got
+ exit 0
+ fi
+ $rm -f Cppsym.got
+ exit 1
+else
+ $tr " " "$trnl" | ./Cppsym.try
+ exit 0
+fi
+EOSH
chmod +x Cppsym
$eunicefix Cppsym
-./Cppsym -l $al | $sort | $grep -v '^$' >Cppsym.true
-
+cat <<EOSH > Cppsym.try
+$startsh
+cat <<'EOCP' > try.c
+#include <stdio.h>
+int main() {
+EOCP
+$awk \\
+EOSH
+cat <<'EOSH' >> Cppsym.try
+'length($1) > 0 {
+ printf "#ifdef %s\n#if %s+0\nprintf(\"%s=%%ld\\n\", %s);\n#else\nprintf(\"%s\\n\");\n#endif\n#endif\n", $1, $1, $1, $1, $1
+ printf "#ifdef _%s\n#if _%s+0\nprintf(\"_%s=%%ld\\n\", _%s);\n#else\nprintf(\"_%s\\n\");\n#endif\n#endif\n", $1, $1, $1, $1, $1
+ printf "#ifdef __%s\n#if __%s+0\nprintf(\"__%s=%%ld\\n\", __%s);\n#else\nprintf(\"__%s\\n\");\n#endif\n#endif\n", $1, $1, $1, $1, $1
+ printf "#ifdef __%s__\n#if __%s__+0\nprintf(\"__%s__=%%ld\\n\", __%s__);\n#else\nprintf(\"__%s__\\n\");\n#endif\n#endif\n", $1, $1, $1, $1, $1
+}' >> try.c
+echo '}' >> try.c
+EOSH
+cat <<EOSH >> Cppsym.try
+cc="$cc"
+optimize="$optimize"
+ccflags="$ccflags"
+ldflags="$ldflags"
+libs="$libs"
+exe_ext="$exe_ext"
+$cc $optimize $ccflags $ldflags -o try try.c $libs && ./try$exe_ext
+EOSH
+chmod +x Cppsym.try
+$eunicefix Cppsym.try
+./Cppsym < Cppsym.know > Cppsym.true
: now check the C compiler for additional symbols
postprocess_cc_v=''
case "$osname" in
$awk '/\=/ { print $0; next }
{ print $0"=1" }' ccsym.raw >ccsym.list
-$awk '{ print $0"=1" }' Cppsym.true >ccsym.true
+$awk '/\=/ { print $0; next }
+ { print $0"=1" }' Cppsym.true >ccsym.true
$comm -13 ccsym.true ccsym.list >ccsym.own
$comm -12 ccsym.true ccsym.list >ccsym.com
$comm -23 ccsym.true ccsym.list >ccsym.cpp
set i_sysioctl
eval $setvar
+
+: see if this is a syslog.h system
+set syslog.h i_syslog
+eval $inhdr
+
: see if sys/resource.h has to be included
set sys/resource.h i_sysresrc
eval $inhdr
d_fstatvfs='$d_fstatvfs'
d_ftello='$d_ftello'
d_ftime='$d_ftime'
+d_getcwd='$d_getcwd'
d_getgrent='$d_getgrent'
d_getgrps='$d_getgrps'
d_gethbyaddr='$d_gethbyaddr'
d_grpasswd='$d_grpasswd'
d_hasmntopt='$d_hasmntopt'
d_htonl='$d_htonl'
+d_iconv='$d_iconv'
d_index='$d_index'
d_inetaton='$d_inetaton'
d_int64t='$d_int64t'
d_memmove='$d_memmove'
d_memset='$d_memset'
d_mkdir='$d_mkdir'
+d_mkdtemp='$d_mkdtemp'
d_mkfifo='$d_mkfifo'
+d_mkstemp='$d_mkstemp'
+d_mkstemps='$d_mkstemps'
d_mktime='$d_mktime'
+d_mmap='$d_mmap'
+d_mprotect='$d_mprotect'
d_msg='$d_msg'
d_msg_ctrunc='$d_msg_ctrunc'
d_msg_dontroute='$d_msg_dontroute'
d_msgget='$d_msgget'
d_msgrcv='$d_msgrcv'
d_msgsnd='$d_msgsnd'
+d_msync='$d_msync'
+d_munmap='$d_munmap'
d_mymalloc='$d_mymalloc'
d_nice='$d_nice'
+d_nv_preserves_uv='$d_nv_preserves_uv'
d_off64_t='$d_off64_t'
d_old_pthread_create_joinable='$d_old_pthread_create_joinable'
d_oldpthreads='$d_oldpthreads'
i_float='$i_float'
i_gdbm='$i_gdbm'
i_grp='$i_grp'
+i_iconv='$i_iconv'
i_inttypes='$i_inttypes'
i_limits='$i_limits'
i_locale='$i_locale'
i_sysfilio='$i_sysfilio'
i_sysin='$i_sysin'
i_sysioctl='$i_sysioctl'
+i_syslog='$i_syslog'
+i_sysmman='$i_sysmman'
i_sysmount='$i_sysmount'
i_sysndir='$i_sysndir'
i_sysparam='$i_sysparam'
i_vfork='$i_vfork'
ignore_versioned_solibs='$ignore_versioned_solibs'
inc_version_list='$inc_version_list'
+inc_version_list_init='$inc_version_list_init'
incpath='$incpath'
inews='$inews'
installarchlib='$installarchlib'
libperl='$libperl'
libpth='$libpth'
libs='$libs'
+libsdirs='$libsdirs'
+libsfiles='$libsfiles'
+libsfound='$libsfound'
libswanted='$libswanted'
line='$line'
lint='$lint'
medium='$medium'
mips_type='$mips_type'
mkdir='$mkdir'
+mmaptype='$mmaptype'
models='$models'
modetype='$modetype'
more='$more'
phostname='$phostname'
pidtype='$pidtype'
plibpth='$plibpth'
+pm_apiversion='$pm_apiversion'
pmake='$pmake'
pr='$pr'
prefix='$prefix'
vi='$vi'
voidflags='$voidflags'
xlibpth='$xlibpth'
+xs_apiversion='$xs_apiversion'
zcat='$zcat'
zip='$zip'
EOT
projects / p5sagit/p5-mst-13.2.git / blobdiff