# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Thu Jul 22 22:55:08 EET DST 1999 [metaconfig 3.0 PL70]
+# Generated on Sat Mar 18 23:12:11 EET 2000 [metaconfig 3.0 PL70]
# (with additional metaconfig patches by perlbug@perl.com)
cat >/tmp/c1$$ <<EOF
installarchlib=''
archname=''
myarchname=''
+d_atolf=''
+d_atoll=''
baserev=''
bin=''
binexp=''
installbin=''
+bincompat5005=''
+d_bincompat5005=''
byteorder=''
cc=''
gccversion=''
cf_email=''
cf_by=''
cf_time=''
+charsize=''
contains=''
cpp_stuff=''
cpplast=''
d_flexfnam=''
d_flock=''
d_fork=''
+d_fpos64_t=''
+d_fs_data_s=''
d_fseeko=''
d_fsetpos=''
+d_fstatfs=''
d_ftello=''
d_ftime=''
d_gettimeod=''
d_Gconvert=''
+d_getcwd=''
+d_getfsstat=''
d_getgrent=''
d_getgrps=''
d_gethbyaddr=''
d_uname=''
d_gethostprotos=''
d_getlogin=''
+d_getmnt=''
d_getmntent=''
d_getnbyaddr=''
d_getnbyname=''
d_gnulibc=''
d_hasmntopt=''
d_htonl=''
+d_iconv=''
d_inetaton=''
+d_int64_t=''
d_isascii=''
d_killpg=''
d_lchown=''
+d_ldbl_dig=''
d_link=''
d_locconv=''
d_lockf=''
longdblsize=''
d_longlong=''
longlongsize=''
+d_lseekproto=''
d_lstat=''
d_madvise=''
d_mblen=''
d_memmove=''
d_memset=''
d_mkdir=''
+d_mkdtemp=''
d_mkfifo=''
+d_mkstemp=''
+d_mkstemps=''
d_mktime=''
d_mmap=''
mmaptype=''
d_msync=''
d_munmap=''
d_nice=''
+d_off64_t=''
d_open3=''
d_fpathconf=''
d_pathconf=''
d_pthread_yield=''
d_sched_yield=''
sched_yield=''
+d_qgcvt=''
d_readdir=''
d_rewinddir=''
d_seekdir=''
d_telldir=''
d_readlink=''
-d_readv=''
d_rename=''
d_rmdir=''
d_safebcpy=''
d_shmget=''
d_sigaction=''
d_sigsetjmp=''
-d_cmsghdr_s=''
d_msg_ctrunc=''
d_msg_dontroute=''
d_msg_oob=''
d_msg_peek=''
d_msg_proxy=''
-d_msghdr_s=''
d_oldsock=''
-d_recvmsg=''
d_scm_rights=''
-d_sendmsg=''
d_socket=''
d_sockpair=''
sockethdr=''
socketlib=''
+d_socklen_t=''
+d_sqrtl=''
d_statblks=''
-d_fstatfs=''
-d_statfs=''
-d_statfsflags=''
+d_statfs_f_flags=''
+d_statfs_s=''
d_fstatvfs=''
d_statvfs=''
d_stdio_cnt_lval=''
d_syserrlst=''
d_strtod=''
d_strtol=''
+d_strtold=''
+d_strtoll=''
d_strtoul=''
+d_strtoull=''
+d_strtouq=''
d_strxfrm=''
d_symlink=''
d_syscall=''
d_semctl_semid_ds=''
d_semctl_semun=''
d_union_semun=''
+d_ustat=''
d_vfork=''
usevfork=''
d_voidsig=''
d_waitpid=''
d_wcstombs=''
d_wctomb=''
-d_writev=''
-d_dbmclose64=''
-d_dbminit64=''
-d_delete64=''
-d_fetch64=''
-d_firstkey64=''
-d_nextkey64=''
-d_store64=''
dlext=''
cccdlflags=''
ccdlflags=''
ebcdic=''
fflushNULL=''
fflushall=''
+fpossize=''
fpostype=''
+gidformat=''
+gidsign=''
+gidsize=''
gidtype=''
groupstype=''
h_fcntl=''
i_gdbm=''
d_grpasswd=''
i_grp=''
-d_int64t=''
+i_iconv=''
+i_ieeefp=''
i_inttypes=''
i_limits=''
i_locale=''
i_stdlib=''
i_string=''
strings=''
+i_sunmath=''
i_sysaccess=''
i_sysdir=''
i_sysfile=''
i_sysfilio=''
i_sysioctl=''
i_syssockio=''
+i_syslog=''
i_sysmman=''
+i_sysmode=''
i_sysmount=''
i_sysndir=''
i_sysparam=''
i_syssecrt=''
i_sysselct=''
i_sysstat=''
+i_sysstatfs=''
i_sysstatvfs=''
i_systimes=''
i_systypes=''
-d_iovec_s=''
i_sysuio=''
i_sysun=''
+i_sysutsname=''
+i_sysvfs=''
i_syswait=''
i_sgtty=''
i_termio=''
i_time=''
timeincl=''
i_unistd=''
+i_ustat=''
i_utime=''
i_values=''
i_stdarg=''
i_varargs=''
i_varhdr=''
i_vfork=''
+inc_version_list=''
+inc_version_list_init=''
+installprefix=''
+installprefixexp=''
+installstyle=''
installusrbinperl=''
intsize=''
longsize=''
shortsize=''
-d_dirent64_s=''
-d_flock64_s=''
-d_fstat64=''
-d_ftruncate64=''
-d_ino64_t=''
-d_llseek=''
-d_lockf64=''
-d_lseek64=''
-d_lstat64=''
-d_off64_t=''
-d_offset_t=''
-d_open64=''
-d_opendir64=''
-d_readdir64=''
-d_seekdir64=''
-d_stat64=''
-d_telldir64=''
-d_truncate64=''
libc=''
+ldlibpthname=''
libperl=''
shrpenv=''
useshrplib=''
xlibpth=''
ignore_versioned_solibs=''
libs=''
+libsdirs=''
+libsfiles=''
+libsfound=''
+libspath=''
lns=''
+d_PRIEldbl=''
+d_PRIFldbl=''
+d_PRIGldbl=''
+d_PRIeldbl=''
+d_PRIfldbl=''
+d_PRIgldbl=''
+sPRIEldbl=''
+sPRIFldbl=''
+sPRIGldbl=''
+sPRIeldbl=''
+sPRIfldbl=''
+sPRIgldbl=''
lseeksize=''
lseektype=''
make_set_make=''
package=''
spackage=''
pager=''
-apiversion=''
+api_revision=''
+api_subversion=''
+api_version=''
+api_versionstring=''
patchlevel=''
+revision=''
subversion=''
version=''
+perl5=''
perladmin=''
perlpath=''
+d_nv_preserves_uv=''
+i16size=''
+i16type=''
+i32size=''
+i32type=''
+i64size=''
+i64type=''
+i8size=''
+i8type=''
+ivsize=''
+ivtype=''
+nvsize=''
+nvtype=''
+u16size=''
+u16type=''
+u32size=''
+u32type=''
+u64size=''
+u64type=''
+u8size=''
+u8type=''
+uvsize=''
+uvtype=''
+ivdformat=''
+uvoformat=''
+uvuformat=''
+uvxformat=''
pidtype=''
prefix=''
prefixexp=''
privlibexp=''
prototype=''
ptrsize=''
+d_PRIX64=''
+d_PRId64=''
+d_PRIi64=''
+d_PRIo64=''
+d_PRIu64=''
+d_PRIx64=''
+sPRIX64=''
+sPRId64=''
+sPRIi64=''
+sPRIo64=''
+sPRIu64=''
+sPRIx64=''
+d_quad=''
+quadkind=''
+quadtype=''
+uquadtype=''
drand01=''
randbits=''
randfunc=''
installsitearch=''
sitearch=''
sitearchexp=''
+installsitebin=''
+sitebin=''
+sitebinexp=''
installsitelib=''
sitelib=''
+sitelib_stem=''
sitelibexp=''
+siteprefix=''
+siteprefixexp=''
+sizesize=''
sizetype=''
so=''
+socksizetype=''
sharpbang=''
shsharp=''
spitshell=''
startperl=''
startsh=''
stdchar=''
-d_fgetpos64=''
-d_fopen64=''
-d_freopen64=''
-d_fseek64=''
-d_fseeko64=''
-d_fsetpos64=''
-d_ftell64=''
-d_ftello64=''
-d_tmpfile64=''
d_stdio_stream_array=''
stdio_stream_array=''
sysman=''
trnl=''
+uidformat=''
+uidsign=''
+uidsize=''
uidtype=''
archname64=''
-use64bits=''
+use64bitall=''
+use64bitint=''
+uselargefiles=''
+uselongdouble=''
+usemorebits=''
usemultiplicity=''
nm_opt=''
nm_so_opt=''
useperlio=''
usesocks=''
d_oldpthreads=''
+use5005threads=''
+useithreads=''
usethreads=''
incpath=''
-mips=''
mips_type=''
usrinc=''
+d_vendorarch=''
+installvendorarch=''
+vendorarch=''
+vendorarchexp=''
+d_vendorbin=''
+installvendorbin=''
+vendorbin=''
+vendorbinexp=''
+d_vendorlib=''
+installvendorlib=''
+vendorlib=''
+vendorlib_stem=''
+vendorlibexp=''
+usevendorprefix=''
+vendorprefix=''
+vendorprefixexp=''
defvoidused=''
voidflags=''
+pm_apiversion=''
+xs_apiversion=''
CONFIG=''
define='define'
fi
i_whoami=''
+: set useposix=false in your hint file to disable the POSIX extension.
+useposix=true
+: set useopcode=false in your hint file to disable the Opcode extension.
+useopcode=true
+: Trailing extension. Override this in a hint file, if needed.
+_exe=''
+: Extra object files, if any, needed on this platform.
+archobjs=''
: Possible local include directories to search.
: Set locincpth to "" in a hint file to defeat local include searches.
locincpth="/usr/local/include /opt/local/include /usr/gnu/include"
: no include file wanted by default
inclwanted=''
-: list of known cpp symbols, sorted alphabetically
-al="AMIX BIT_MSF BSD BSD4_3 BSD_NET2 CMU CRAY DGUX DOLPHIN DPX2"
-al="$al GO32 GOULD_PN HP700 I386 I80960 I960 Lynx M68000 M68K MACH"
-al="$al MIPSEB MIPSEL MSDOS MTXINU MULTIMAX MVS"
-al="$al M_COFF M_I186 M_I286 M_I386 M_I8086 M_I86 M_I86SM"
-al="$al M_SYS3 M_SYS5 M_SYSIII M_SYSV M_UNIX M_XENIX"
-al="$al NeXT OCS88 OSF1 PARISC PC532 PORTAR POSIX"
-al="$al PWB R3000 RES RISC6000 RT Sun386i SVR3 SVR4"
-al="$al SYSTYPE_BSD SYSTYPE_SVR4 SYSTYPE_SYSV Tek4132 Tek4300"
-al="$al UMAXV USGr4 USGr4_2 UTEK UTS UTek UnicomPBB UnicomPBD Utek"
-al="$al VMS Xenix286"
-al="$al _AIX _AIX32 _AIX370 _AIX41 _AM29000 _COFF _CRAY _CX_UX _EPI"
-al="$al _IBMESA _IBMR2 _M88K _M88KBCS_TARGET _POWER"
-al="$al _MIPSEB _MIPSEL _M_COFF _M_I86 _M_I86SM _M_SYS3"
-al="$al _M_SYS5 _M_SYSIII _M_SYSV _M_UNIX _M_XENIX _NLS _PGC_ _R3000"
-al="$al _SYSTYPE_BSD _SYSTYPE_BSD43 _SYSTYPE_SVR4"
-al="$al _SYSTYPE_SYSV _SYSV3 _U370 _UNICOS"
-al="$al __386BSD__ __BIG_ENDIAN __BIG_ENDIAN__ __BSD_4_4__"
-al="$al __DGUX__ __DPX2__ __H3050R __H3050RX"
-al="$al __LITTLE_ENDIAN __LITTLE_ENDIAN__ __MACH__"
-al="$al __MIPSEB __MIPSEB__ __MIPSEL __MIPSEL__"
-al="$al __Next__ __OSF1__ __PARAGON__ __PGC__ __PWB __STDC__"
-al="$al __SVR4_2__ __UMAXV__"
-al="$al ____386BSD____ __alpha __alpha__ __amiga"
-al="$al __bsd4_2 __bsd4_2__ __bsdi__ __convex__"
-al="$al __host_mips__"
-al="$al __hp9000s200 __hp9000s300 __hp9000s400 __hp9000s500"
-al="$al __hp9000s500 __hp9000s700 __hp9000s800"
-al="$al __hppa __hpux __hp_osf __i286 __i286__ __i386 __i386__"
-al="$al __i486 __i486__ __i860 __i860__ __ibmesa __ksr1__ __linux__"
-al="$al __m68k __m68k__ __m88100__ __m88k __m88k__"
-al="$al __mc68000 __mc68000__ __mc68020 __mc68020__"
-al="$al __mc68030 __mc68030__ __mc68040 __mc68040__"
-al="$al __mc88100 __mc88100__ __mips __mips__"
-al="$al __motorola__ __osf__ __pa_risc __sparc__ __stdc__"
-al="$al __sun __sun__ __svr3__ __svr4__ __ultrix __ultrix__"
-al="$al __unix __unix__ __uxpm__ __uxps__ __vax __vax__"
-al="$al _host_mips _mips _unix"
-al="$al a29k aegis aix aixpc alliant alpha am29000 amiga ansi ardent"
-al="$al apollo ardent att386 att3b"
-al="$al bsd bsd43 bsd4_2 bsd4_3 bsd4_4 bsdi bull"
-al="$al cadmus clipper concurrent convex cray ctix"
-al="$al dmert encore gcos gcx gimpel gould"
-al="$al hbullx20 hcx host_mips hp200 hp300 hp700 hp800"
-al="$al hp9000 hp9000s300 hp9000s400 hp9000s500"
-al="$al hp9000s700 hp9000s800 hp9k8 hppa hpux"
-al="$al i186 i286 i386 i486 i8086"
-al="$al i80960 i860 iAPX286 ibm ibm032 ibmrt interdata is68k"
-al="$al ksr1 linux luna luna88k m68k m88100 m88k"
-al="$al mc300 mc500 mc68000 mc68010 mc68020 mc68030"
-al="$al mc68040 mc68060 mc68k mc68k32 mc700"
-al="$al mc88000 mc88100 merlin mert mips mvs n16"
-al="$al ncl_el ncl_mr"
-al="$al news1500 news1700 news1800 news1900 news3700"
-al="$al news700 news800 news900 ns16000 ns32000"
-al="$al ns32016 ns32332 ns32k nsc32000 os osf"
-al="$al parisc pc532 pdp11 plexus posix pyr"
-al="$al riscix riscos scs sequent sgi sinix sony sony_news"
-al="$al sonyrisc sparc sparclite spectrum stardent stratos"
-al="$al sun sun3 sun386 svr4 sysV68 sysV88"
-al="$al titan tower tower32 tower32_200 tower32_600 tower32_700"
-al="$al tower32_800 tower32_850 tss u370 u3b u3b2 u3b20 u3b200"
-al="$al u3b20d u3b5 ultrix unix unixpc unos vax venix vms"
-al="$al xenix z8000"
-
-: Trailing extension. Override this in a hint file, if needed.
-_exe=''
-: Extra object files, if any, needed on this platform.
-archobjs=''
groupstype=''
: change the next line if compiling for Xenix/286 on Xenix/386
xlibpth='/usr/lib/386 /lib/386'
-
: Possible local library directories to search.
loclibpth="/usr/local/lib /opt/local/lib /usr/gnu/lib"
loclibpth="$loclibpth /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib"
: general looking path for locating libraries
-glibpth="/shlib /usr/shlib /lib/pa1.1 /usr/lib/large"
-glibpth="$glibpth /lib /usr/lib $xlibpth"
+glibpth="/usr/lib/large /lib /usr/lib $xlibpth"
glibpth="$glibpth /lib/large /usr/lib/small /lib/small"
glibpth="$glibpth /usr/ccs/lib /usr/ucblib /usr/local/lib"
+test -f /usr/shlib/libc.so && glibpth="/usr/shlib $glibpth"
+test -f /shlib/libc.so && glibpth="/shlib $glibpth"
: Private path used by Configure to find libraries. Its value
: is prepended to libpth. This variable takes care of special
libswanted=''
: some systems want to use only the non-versioned libso:s
ignore_versioned_solibs=''
-: full support for void wanted by default
-defvoidused=15
-
-: set useposix=false in your hint file to disable the POSIX extension.
-useposix=true
-: set useopcode=false in your hint file to disable the Opcode extension.
-useopcode=true
: set usemultiplicity on the Configure command line to enable multiplicity.
: set usesocks on the Configure command line to enable socks.
: set usethreads on the Configure command line to enable threads.
+: full support for void wanted by default
+defvoidused=15
+
: List of libraries we want.
: If anyone needs -lnet, put it in a hint file.
-libswanted='sfio socket inet nsl nm ndbm gdbm dbm db malloc dl'
-libswanted="$libswanted dld ld sun m rt c cposix posix"
+libswanted='sfio socket bind inet nsl nm ndbm gdbm dbm db malloc dl'
+libswanted="$libswanted dld ld sun m c cposix posix"
libswanted="$libswanted ndir dir crypt sec"
-libswanted="$libswanted ucb bsd BSD PW x"
+libswanted="$libswanted ucb bsd BSD PW x iconv"
: We probably want to search /usr/shlib before most other libraries.
: This is only used by the lib/ExtUtils/MakeMaker.pm routine extliblist.
glibpth=`echo " $glibpth " | sed -e 's! /usr/shlib ! !'`
: produce awk script to parse command line options
cat >options.awk <<'EOF'
BEGIN {
- optstr = "dD:eEf:hKOrsSU:V"; # getopt-style specification
+ optstr = "A:dD:eEf:hKOrsSU:V"; # getopt-style specification
len = length(optstr);
for (i = 1; i <= len; i++) {
extractsh=''
override=''
knowitall=''
-rm -f optdef.sh
+rm -f optdef.sh posthint.sh
cat >optdef.sh <<EOS
$startsh
EOS
esac
shift
;;
+ -A)
+ shift
+ xxx=''
+ yyy="$1"
+ zzz=''
+ uuu=undef
+ case "$yyy" in
+ *=*) zzz=`echo $yyy|sed 's!=.*!!'`
+ case "$zzz" in
+ *:*) zzz='' ;;
+ *) xxx=append
+ zzz=" "`echo $yyy|sed 's!^[^=]*=!!'`
+ yyy=`echo $yyy|sed 's!=.*!!'` ;;
+ esac
+ ;;
+ esac
+ case "$xxx" in
+ '') case "$yyy" in
+ *:*) xxx=`echo $yyy|sed 's!:.*!!'`
+ yyy=`echo $yyy|sed 's!^[^:]*:!!'`
+ zzz=`echo $yyy|sed 's!^[^=]*=!!'`
+ yyy=`echo $yyy|sed 's!=.*!!'` ;;
+ *) xxx=`echo $yyy|sed 's!:.*!!'`
+ yyy=`echo $yyy|sed 's!^[^:]*:!!'` ;;
+ esac
+ ;;
+ esac
+ case "$xxx" in
+ append)
+ echo "$yyy=\"\${$yyy}$zzz\"" >> posthint.sh ;;
+ clear)
+ echo "$yyy=''" >> posthint.sh ;;
+ define)
+ case "$zzz" in
+ '') zzz=define ;;
+ esac
+ echo "$yyy='$zzz'" >> posthint.sh ;;
+ eval)
+ echo "eval \"$yyy=$zzz\"" >> posthint.sh ;;
+ prepend)
+ echo "$yyy=\"$zzz\${$yyy}\"" >> posthint.sh ;;
+ undef)
+ case "$zzz" in
+ '') zzz="$uuu" ;;
+ esac
+ echo "$yyy=$zzz" >> posthint.sh ;;
+ *) echo "$me: unknown -A command '$xxx', ignoring -A $1" >&2 ;;
+ esac
+ shift
+ ;;
-V) echo "$me generated by metaconfig 3.0 PL70." >&2
- exit 0;;
+ exit 0;;
--) break;;
-*) echo "$me: unknown option $1" >&2; shift; error=true;;
*) break;;
true)
cat >&2 <<EOM
Usage: $me [-dehrsEKOSV] [-f config.sh] [-D symbol] [-D symbol=value]
- [-U symbol] [-U symbol=]
+ [-U symbol] [-U symbol=] [-A command:symbol...]
-d : use defaults for all answers.
-e : go on without questioning past the production of config.sh.
-f : specify an alternate default configuration file.
-U : undefine symbol:
-U symbol symbol gets the value 'undef'
-U symbol= symbol gets completely empty
+ -A : manipulate symbol after the platform specific hints have been applied:
+ -A symbol=value append " "value to symbol
+ -A append:symbol=value append value to symbol
+ -A define:symbol=value define symbol to have value
+ -A clear:symbol define symbol to be ''
+ -A define:symbol define symbol to be 'define'
+ -A eval:symbol=value define symbol to be eval of value
+ -A prepend:symbol=value prepend value to symbol
+ -A undef:symbol define symbol to be 'undef'
+ -A undef:symbol= define symbol to be ''
-V : print version number and exit (with a zero status).
EOM
exit 1
: run the defines and the undefines, if any, but leave the file out there...
touch optdef.sh
. ./optdef.sh
+: create the posthint manipulation script and leave the file out there...
+touch posthint.sh
: set package name
package=perl5
: Find the path to the source tree
case "$src" in
'') case "$0" in
- */*) src=`echo $0 | sed -e 's%/[^/][^/]*$%%'`;;
+ */*) src=`echo $0 | sed -e 's%/[^/][^/]*$%%'`
+ case "$src" in
+ /*) ;;
+ *) src=`cd ../$src && pwd` ;;
+ esac
+ ;;
*) src='.';;
esac;;
esac
: Try to determine whether config.sh was made on this system
case "$config_sh" in
'')
-myuname=`( ($uname -a) 2>/dev/null || hostname) 2>&1`
+myuname=`$uname -a 2>/dev/null`
+$test -z "$myuname" && myuname=`hostname 2>/dev/null`
# tr '[A-Z]' '[a-z]' would not work in EBCDIC
# because the A-Z/a-z are not consecutive.
myuname=`echo $myuname | $sed -e 's/^[^=]*=//' -e 's/\///g' | \
$test -f /dnix && osname=dnix
$test -f /lynx.os && osname=lynxos
$test -f /unicos && osname=unicos && osvers=`$uname -r`
+ $test -f /unicosmk && osname=unicosmk && osvers=`$uname -r`
$test -f /unicosmk.ar && osname=unicosmk && osvers=`$uname -r`
$test -f /bin/mips && /bin/mips && osname=mips
$test -d /NextApps && set X `hostinfo | grep 'NeXT Mach.*:' | \
osvers="$2.$3"
fi
fi
- $test -f /sys/posix.dll &&
- $test -f /usr/bin/what &&
- set X `/usr/bin/what /sys/posix.dll` &&
- $test "$3" = UWIN &&
- osname=uwin &&
- osvers="$5"
+
+ $test -f /sys/posix.dll &&
+ $test -f /usr/bin/what &&
+ set X `/usr/bin/what /sys/posix.dll` &&
+ $test "$3" = UWIN &&
+ osname=uwin &&
+ osvers="$5"
+
if $test -f $uname; then
set X $myuname
shift
*) osvers=$tmp;;
esac
;;
+ bsd386) osname=bsd386
+ osvers=`$uname -r`
+ ;;
+ cygwin*) osname=cygwin
+ osvers="$3"
+ ;;
*dc.osx) osname=dcosx
osvers="$3"
;;
*) osname=newsos ;;
esac
;;
- bsd386) osname=bsd386
- osvers=`$uname -r`
+ next*) osname=next ;;
+ POSIX-BC | posix-bc ) osname=posix-bc
+ osvers="$3"
;;
- POSIX-BC | posix-bc ) osname=posix-bc
- osvers="$3"
- ;;
powerux | power_ux | powermax_os | powermaxos | \
powerunix | power_unix) osname=powerux
osvers="$3"
;;
- next*) osname=next ;;
+ qnx) osname=qnx
+ osvers="$4"
+ ;;
solaris) osname=solaris
case "$3" in
5*) osvers=`echo $3 | $sed 's/^5/2/g'` ;;
mips) osname=mips_osf1 ;;
esac
;;
- uts) osname=uts
- osvers="$3"
- ;;
- qnx) osname=qnx
+ unixware) osname=svr5
osvers="$4"
;;
+ uts) osname=uts
+ osvers="$3"
+ ;;
$2) case "$osname" in
*isc*) ;;
*freebsd*) ;;
: specified already.
case "$hintfile" in
''|' ')
- file=`echo "${osname}_${osvers}" | $sed -e 's@\.@_@g' -e 's@_$@@'`
+ file=`echo "${osname}_${osvers}" | $sed -e 's%\.%_%g' -e 's%_$%%'`
: Also try without trailing minor version numbers.
- xfile=`echo $file | $sed -e 's@_[^_]*$@@'`
- xxfile=`echo $xfile | $sed -e 's@_[^_]*$@@'`
- xxxfile=`echo $xxfile | $sed -e 's@_[^_]*$@@'`
- xxxxfile=`echo $xxxfile | $sed -e 's@_[^_]*$@@'`
+ xfile=`echo $file | $sed -e 's%_[^_]*$%%'`
+ xxfile=`echo $xfile | $sed -e 's%_[^_]*$%%'`
+ xxxfile=`echo $xxfile | $sed -e 's%_[^_]*$%%'`
+ xxxxfile=`echo $xxxfile | $sed -e 's%_[^_]*$%%'`
case "$file" in
'') dflt=none ;;
*) case "$osvers" in
You may give one or more space-separated answers, or "none" if appropriate.
A well-behaved OS will have no hints, so answering "none" or just "Policy"
-is a good thing. DO NOT give a wrong version.
+is a good thing. DO NOT give a wrong version or a wrong OS.
EOM
*) osvers="$ans" ;;
esac
+
+. ./posthint.sh
+
: who configured the system
cf_time=`LC_ALL=C; LANGUAGE=C; export LC_ALL; export LANGUAGE; $date 2>&1`
cf_by=`(logname) 2>/dev/null`
*) eval "$var=$val";;
esac'
+case "$usethreads" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
cat <<EOM
-Perl can be built to take advantage of threads, on some systems.
-To do so, Configure must be run with -Dusethreads.
+Perl can be built to take advantage of threads on some systems.
+To do so, Configure can be run with -Dusethreads.
Note that threading is a highly experimental feature, and
some known race conditions still remain. If you choose to try
it, be very sure to not actually deploy it for production
purposes. README.threads has more details, and is required
reading if you enable threads.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
EOM
-case "$usethreads" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
rp='Build a threading Perl?'
. ./myread
case "$ans" in
-y|Y) val="$define" ;;
+y|Y) val="$define" ;;
*) val="$undef" ;;
esac
set usethreads
-eval $setvar
+eval $setvar
+
+case "$usethreads" in
+$define)
+ $cat <<EOM
+
+As of 5.5.640, Perl has two different internal threading implementations,
+the 5.005 version (5005threads) and an interpreter-based version
+(ithreads) that has one interpreter per thread. Both are very
+experimental. This arrangement exists to help developers work out
+which one is better.
+
+If you're a casual user, you probably don't want interpreter-threads
+at this time. There doesn't yet exist a way to create threads from
+within Perl in this model, i.e., "use Thread;" will NOT work.
+EOM
+ : Default to ithreads unless overridden on command line or with
+ : old config.sh
+ dflt='y'
+ case "$use5005threads" in
+ $define|true|[yY]*) dflt='n';;
+ esac
+ case "$useithreads" in
+ $undef|false|[nN]*) dflt='n';;
+ esac
+ rp='Use interpreter-based ithreads?'
+ . ./myread
+ case "$ans" in
+ y|Y) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ set useithreads
+ eval $setvar
+ : Now set use5005threads to the opposite value.
+ case "$useithreads" in
+ $define) val="$undef" ;;
+ *) val="$define" ;;
+ esac
+ set use5005threads
+ eval $setvar
+ ;;
+*)
+ useithreads="$undef"
+ use5005threads="$undef"
+ ;;
+esac
case "$d_oldpthreads" in
'') : Configure tests would be welcome here. For now, assume undef.
: user has specified that a threading perl is to be built,
: we may need to set or change some other defaults.
if $test -f usethreads.cbu; then
+ echo "Your platform has some specific hints for threaded builds, using them..."
. ./usethreads.cbu
- fi
- case "$osname" in
- aix|dec_osf|dos_djgpp|freebsd|hpux|irix|linux|next|openbsd|os2|solaris|vmesa)
- # Known thread-capable platforms.
- ;;
- *)
- cat >&4 <<EOM
-$osname is not known to support threads.
-Please let perlbug@perl.com know how to do that.
-
-Cannot continue, aborting.
+ else
+ $cat <<EOM
+(Your platform doesn't have any specific hints for threaded builds.
+ Assuming POSIX threads, then.)
EOM
- exit 1
+ fi
;;
- esac # $osname
- ;;
-esac # $usethreads
+esac
cat <<EOM
Perl can be built so that multiple Perl interpreters can coexist
-within the same Perl executable. To do so, Configure must be run with
--Dusemultiplicity.
-
-Normally you do not need this and you should answer no.
-
+within the same Perl executable.
EOM
-case "$usemultiplicity" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-rp='Build Perl for multiplicity?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
-esac
-set usemultiplicity
-eval $setvar
-
-cat <<EOM
-
-Perl can be built to take advantage of explicit 64-bit interfaces,
-on some systems. To do so, Configure must be run with -Duse64bits.
-If this doesn't make any sense to you, just accept the default 'n'.
+case "$useithreads" in
+$define)
+ cat <<EOM
+This multiple interpreter support is required for interpreter-based threads.
EOM
-case "$use64bits" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-rp='Try to use explicit 64-bit interfaces, if available?'
-. ./myread
-case "$ans" in
-y|Y)
val="$define"
- ;;
-*)
- val="$undef"
;;
-esac
-set use64bits
-eval $setvar
-
-case "$archname64" in
-'') archname64='' ;; # not a typo
-esac
-
-case "$use64bits" in
-"$define"|true|[yY]*)
-: Look for a hint-file generated 'call-back-unit'. If the
-: user has specified that a threading perl is to be built,
-: we may need to set or change some other defaults.
- if $test -f use64bits.cbu; then
- . ./use64bits.cbu
- fi
- case "$osname" in
- aix|dec_osf|hpux|irix|solaris|unicos)
- # Known 64-bit capable platforms.
- ;;
- *)
- cat >&4 <<EOM
-$osname is not known to support 64-bit interfaces.
-Please let perlbug@perl.com know how to do that.
-
-Cannot continue, aborting.
-EOM
- exit 1
- ;;
+*) case "$usemultiplicity" in
+ $define|true|[yY]*) dflt='y';;
+ *) dflt='n';;
esac
- ;;
-esac
-
-: determine the architecture name
-echo " "
-if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
- tarch=`arch`"-$osname"
-elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
- if uname -m > tmparch 2>&1 ; then
- tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
- -e 's/$/'"-$osname/" tmparch`
- else
- tarch="$osname"
- fi
- $rm -f tmparch
-else
- tarch="$osname"
-fi
-case "$myarchname" in
-''|"$tarch") ;;
-*)
- echo "(Your architecture name used to be $myarchname.)"
- archname=''
- ;;
-esac
-myarchname="$tarch"
-case "$archname" in
-'') dflt="$tarch";;
-*) dflt="$archname";;
-esac
-rp='What is your architecture name'
-. ./myread
-archname="$ans"
-case "$usethreads" in
-$define)
- echo "Threads selected." >&4
- case "$archname" in
- *-thread*) echo "...and architecture name already has -thread." >&4
- ;;
- *) archname="$archname-thread"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
-esac
-case "$usemultiplicity" in
-$define)
- echo "Multiplicity selected." >&4
- case "$archname" in
- *-multi*) echo "...and architecture name already has -multi." >&4
- ;;
- *) archname="$archname-multi"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
-esac
-case "$use64bits" in
-$define)
- echo "Explicit 64-bitness selected." >&4
- case "$archname64" in
- '')
- ;;
- *)
- case "$archname" in
- *-$archname64*) echo "...and architecture name already has $archname64." >&4
- ;;
- *) archname="$archname-$archname64"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
+ echo " "
+ echo "If this doesn't make any sense to you, just accept the default '$dflt'."
+ rp='Build Perl for multiplicity?'
+ . ./myread
+ case "$ans" in
+ y|Y) val="$define" ;;
+ *) val="$undef" ;;
esac
+ ;;
esac
+set usemultiplicity
+eval $setvar
-: is AFS running?
+: determine where manual pages are on this system
echo " "
-case "$afs" in
-$define|true) afs=true ;;
-$undef|false) afs=false ;;
-*) if test -d /afs; then
- afs=true
- else
- afs=false
- fi
+case "$sysman" in
+'')
+ syspath='/usr/man/man1 /usr/man/mann /usr/man/manl /usr/man/local/man1'
+ syspath="$syspath /usr/man/u_man/man1 /usr/share/man/man1"
+ syspath="$syspath /usr/catman/u_man/man1 /usr/man/l_man/man1"
+ syspath="$syspath /usr/local/man/u_man/man1 /usr/local/man/l_man/man1"
+ syspath="$syspath /usr/man/man.L /local/man/man1 /usr/local/man/man1"
+ sysman=`./loc . /usr/man/man1 $syspath`
;;
esac
-if $afs; then
- echo "AFS may be running... I'll be extra cautious then..." >&4
+if $test -d "$sysman"; then
+ echo "System manual is in $sysman." >&4
else
- echo "AFS does not seem to be running..." >&4
+ echo "Could not find manual pages in source form." >&4
fi
-: decide how portable to be. Allow command line overrides.
-case "$d_portable" in
-"$undef") ;;
-*) d_portable="$define" ;;
-esac
-
-: set up shell script to do ~ expansion
-cat >filexp <<EOSS
-$startsh
-: expand filename
-case "\$1" in
- ~/*|~)
- echo \$1 | $sed "s|~|\${HOME-\$LOGDIR}|"
- ;;
- ~*)
+: see what memory models we can support
+case "$models" in
+'')
+ $cat >pdp11.c <<'EOP'
+int main() {
+#ifdef pdp11
+ exit(0);
+#else
+ exit(1);
+#endif
+}
+EOP
+ ( cc -o pdp11 pdp11.c ) >/dev/null 2>&1
+ if $test -f pdp11 && ./pdp11 2>/dev/null; then
+ dflt='unsplit split'
+ else
+ tans=`./loc . X /lib/small /lib/large /usr/lib/small /usr/lib/large /lib/medium /usr/lib/medium /lib/huge`
+ case "$tans" in
+ X) dflt='none';;
+ *) if $test -d /lib/small || $test -d /usr/lib/small; then
+ dflt='small'
+ else
+ dflt=''
+ fi
+ if $test -d /lib/medium || $test -d /usr/lib/medium; then
+ dflt="$dflt medium"
+ fi
+ if $test -d /lib/large || $test -d /usr/lib/large; then
+ dflt="$dflt large"
+ fi
+ if $test -d /lib/huge || $test -d /usr/lib/huge; then
+ dflt="$dflt huge"
+ fi
+ esac
+ fi;;
+*) dflt="$models";;
+esac
+$cat <<EOM
+
+Some systems have different model sizes. On most systems they are called
+small, medium, large, and huge. On the PDP11 they are called unsplit and
+split. If your system doesn't support different memory models, say "none".
+If you wish to force everything to one memory model, say "none" here and
+put the appropriate flags later when it asks you for other cc and ld flags.
+Venix systems may wish to put "none" and let the compiler figure things out.
+(In the following question multiple model names should be space separated.)
+
+The default for most systems is "none".
+
+EOM
+rp="Which memory models are supported?"
+. ./myread
+models="$ans"
+
+case "$models" in
+none)
+ small=''
+ medium=''
+ large=''
+ huge=''
+ unsplit=''
+ split=''
+ ;;
+*split)
+ case "$split" in
+ '') if $contains '\-i' $sysman/ld.1 >/dev/null 2>&1 || \
+ $contains '\-i' $sysman/cc.1 >/dev/null 2>&1; then
+ dflt='-i'
+ else
+ dflt='none'
+ fi;;
+ *) dflt="$split";;
+ esac
+ rp="What flag indicates separate I and D space?"
+ . ./myread
+ tans="$ans"
+ case "$tans" in
+ none) tans='';;
+ esac
+ split="$tans"
+ unsplit='';;
+*large*|*small*|*medium*|*huge*)
+ case "$models" in
+ *large*)
+ case "$large" in
+ '') dflt='-Ml';;
+ *) dflt="$large";;
+ esac
+ rp="What flag indicates large model?"
+ . ./myread
+ tans="$ans"
+ case "$tans" in
+ none) tans='';
+ esac
+ large="$tans";;
+ *) large='';;
+ esac
+ case "$models" in
+ *huge*) case "$huge" in
+ '') dflt='-Mh';;
+ *) dflt="$huge";;
+ esac
+ rp="What flag indicates huge model?"
+ . ./myread
+ tans="$ans"
+ case "$tans" in
+ none) tans='';
+ esac
+ huge="$tans";;
+ *) huge="$large";;
+ esac
+ case "$models" in
+ *medium*) case "$medium" in
+ '') dflt='-Mm';;
+ *) dflt="$medium";;
+ esac
+ rp="What flag indicates medium model?"
+ . ./myread
+ tans="$ans"
+ case "$tans" in
+ none) tans='';
+ esac
+ medium="$tans";;
+ *) medium="$large";;
+ esac
+ case "$models" in
+ *small*) case "$small" in
+ '') dflt='none';;
+ *) dflt="$small";;
+ esac
+ rp="What flag indicates small model?"
+ . ./myread
+ tans="$ans"
+ case "$tans" in
+ none) tans='';
+ esac
+ small="$tans";;
+ *) small='';;
+ esac
+ ;;
+*)
+ echo "Unrecognized memory models--you may have to edit Makefile.SH" >&4
+ ;;
+esac
+$rm -f pdp11.* pdp11
+
+: make some quick guesses about what we are up against
+echo " "
+$echo $n "Hmm... $c"
+echo exit 1 >bsd
+echo exit 1 >usg
+echo exit 1 >v7
+echo exit 1 >osf1
+echo exit 1 >eunice
+echo exit 1 >xenix
+echo exit 1 >venix
+echo exit 1 >os2
+d_bsd="$undef"
+$cat /usr/include/signal.h /usr/include/sys/signal.h >foo 2>/dev/null
+if test -f /osf_boot || $contains 'OSF/1' /usr/include/ctype.h >/dev/null 2>&1
+then
+ echo "Looks kind of like an OSF/1 system, but we'll see..."
+ echo exit 0 >osf1
+elif test `echo abc | tr a-z A-Z` = Abc ; then
+ xxx=`./loc addbib blurfl $pth`
+ if $test -f $xxx; then
+ echo "Looks kind of like a USG system with BSD features, but we'll see..."
+ echo exit 0 >bsd
+ echo exit 0 >usg
+ else
+ if $contains SIGTSTP foo >/dev/null 2>&1 ; then
+ echo "Looks kind of like an extended USG system, but we'll see..."
+ else
+ echo "Looks kind of like a USG system, but we'll see..."
+ fi
+ echo exit 0 >usg
+ fi
+elif $contains SIGTSTP foo >/dev/null 2>&1 ; then
+ echo "Looks kind of like a BSD system, but we'll see..."
+ d_bsd="$define"
+ echo exit 0 >bsd
+else
+ echo "Looks kind of like a Version 7 system, but we'll see..."
+ echo exit 0 >v7
+fi
+case "$eunicefix" in
+*unixtovms*)
+ $cat <<'EOI'
+There is, however, a strange, musty smell in the air that reminds me of
+something...hmm...yes...I've got it...there's a VMS nearby, or I'm a Blit.
+EOI
+ echo exit 0 >eunice
+ d_eunice="$define"
+: it so happens the Eunice I know will not run shell scripts in Unix format
+ ;;
+*)
+ echo " "
+ echo "Congratulations. You aren't running Eunice."
+ d_eunice="$undef"
+ ;;
+esac
+: Detect OS2. The p_ variable is set above in the Head.U unit.
+case "$p_" in
+:) ;;
+*)
+ $cat <<'EOI'
+I have the feeling something is not exactly right, however...don't tell me...
+lemme think...does HAL ring a bell?...no, of course, you're only running OS/2!
+EOI
+ echo exit 0 >os2
+ ;;
+esac
+if test -f /xenix; then
+ echo "Actually, this looks more like a XENIX system..."
+ echo exit 0 >xenix
+ d_xenix="$define"
+else
+ echo " "
+ echo "It's not Xenix..."
+ d_xenix="$undef"
+fi
+chmod +x xenix
+$eunicefix xenix
+if test -f /venix; then
+ echo "Actually, this looks more like a VENIX system..."
+ echo exit 0 >venix
+else
+ echo " "
+ if ./xenix; then
+ : null
+ else
+ echo "Nor is it Venix..."
+ fi
+fi
+chmod +x bsd usg v7 osf1 eunice xenix venix os2
+$eunicefix bsd usg v7 osf1 eunice xenix venix os2
+$rm -f foo
+
+: see if we need a special compiler
+echo " "
+if ./usg; then
+ case "$cc" in
+ '') case "$Mcc" in
+ /*) dflt='Mcc';;
+ *) case "$large" in
+ -M*) dflt='cc';;
+ *) if $contains '\-M' $sysman/cc.1 >/dev/null 2>&1 ; then
+ if $contains '\-M' $sysman/cpp.1 >/dev/null 2>&1; then
+ dflt='cc'
+ else
+ dflt='cc -M'
+ fi
+ else
+ dflt='cc'
+ fi;;
+ esac;;
+ esac;;
+ *) dflt="$cc";;
+ esac
+ case "$dflt" in
+ *M*) $cat <<'EOM'
+On some older systems the default C compiler will not resolve multiple global
+references that happen to have the same name. On some such systems the "Mcc"
+command may be used to force these to be resolved. On other systems a "cc -M"
+command is required. (Note that the -M flag on other systems indicates a
+memory model to use!) If you have the Gnu C compiler, you might wish to use
+that instead.
+
+EOM
+ ;;
+ esac
+ rp="Use which C compiler?"
+ . ./myread
+ cc="$ans"
+else
+ case "$cc" in
+ '') dflt=cc;;
+ *) dflt="$cc";;
+ esac
+ rp="Use which C compiler?"
+ . ./myread
+ cc="$ans"
+fi
+: Look for a hint-file generated 'call-back-unit'. Now that the
+: user has specified the compiler, we may need to set or change some
+: other defaults.
+if $test -f cc.cbu; then
+ . ./cc.cbu
+fi
+echo " "
+echo "Checking for GNU cc in disguise and/or its version number..." >&4
+$cat >gccvers.c <<EOM
+#include <stdio.h>
+int main() {
+#ifdef __GNUC__
+#ifdef __VERSION__
+ printf("%s\n", __VERSION__);
+#else
+ printf("%s\n", "1");
+#endif
+#endif
+ exit(0);
+}
+EOM
+if $cc $ldflags -o gccvers gccvers.c; then
+ gccversion=`./gccvers`
+ case "$gccversion" in
+ '') echo "You are not using GNU cc." ;;
+ *) echo "You are using GNU cc $gccversion."
+ ;;
+ esac
+else
+ echo " "
+ echo "*** WHOA THERE!!! ***" >&4
+ echo " Your C compiler \"$cc\" doesn't seem to be working!" >&4
+ case "$knowitall" in
+ '')
+ echo " You'd better start hunting for one and let me know about it." >&4
+ exit 1
+ ;;
+ esac
+fi
+$rm -f gccvers*
+case "$gccversion" in
+1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
+esac
+
+: decide how portable to be. Allow command line overrides.
+case "$d_portable" in
+"$undef") ;;
+*) d_portable="$define" ;;
+esac
+
+: set up shell script to do ~ expansion
+cat >filexp <<EOSS
+$startsh
+: expand filename
+case "\$1" in
+ ~/*|~)
+ echo \$1 | $sed "s|~|\${HOME-\$LOGDIR}|"
+ ;;
+ ~*)
if $test -f /bin/csh; then
/bin/csh -f -c "glob \$1"
failed=\$?
nopath_ok=''
orig_rp="$rp"
orig_dflt="$dflt"
+case "$gfpth" in
+'') gfpth='.' ;;
+esac
case "$fn" in
*\(*)
'')
case "$type" in
File)
- if test -f "$ansexp"; then
- type=''
- elif test -r "$ansexp" || (test -h "$ansexp") >/dev/null 2>&1
- then
- echo "($value is not a plain file, but that's ok.)"
- type=''
- fi
+ for fp in $gfpth; do
+ if test "X$fp" = X.; then
+ pf="$ansexp"
+ else
+ pf="$fp/$ansexp"
+ fi
+ if test -f "$pf"; then
+ type=''
+ elif test -r "$pf" || (test -h "$pf") >/dev/null 2>&1
+ then
+ echo "($value is not a plain file, but that's ok.)"
+ type=''
+ fi
+ if test X"$type" = X; then
+ value="$pf"
+ break
+ fi
+ done
;;
Directory)
- if test -d "$ansexp"; then
- type=''
- fi
+ for fp in $gfpth; do
+ if test "X$fp" = X.; then
+ dir="$ans"
+ direxp="$ansexp"
+ else
+ dir="$fp/$ans"
+ direxp="$fp/$ansexp"
+ fi
+ if test -d "$direxp"; then
+ type=''
+ value="$dir"
+ break
+ fi
+ done
;;
Locate)
if test -d "$ansexp"; then
rp="$orig_rp"
dflt="$orig_dflt"
rm -f getfile.ok
+test "X$gfpthkeep" != Xy && gfpth=""
EOSC
-: determine root of directory hierarchy where package will be installed.
-case "$prefix" in
-'')
- dflt=`./loc . /usr/local /usr/local /local /opt /usr`
+: What should the include directory be ?
+echo " "
+$echo $n "Hmm... $c"
+dflt='/usr/include'
+incpath=''
+mips_type=''
+if $test -f /bin/mips && /bin/mips; then
+ echo "Looks like a MIPS system..."
+ $cat >usr.c <<'EOCP'
+#ifdef SYSTYPE_BSD43
+/bsd43
+#endif
+EOCP
+ if $cc -E usr.c > usr.out && $contains / usr.out >/dev/null 2>&1; then
+ dflt='/bsd43/usr/include'
+ incpath='/bsd43'
+ mips_type='BSD 4.3'
+ else
+ mips_type='System V'
+ fi
+ $rm -f usr.c usr.out
+ echo "and you're compiling with the $mips_type compiler and libraries."
+ xxx_prompt=y
+ echo "exit 0" >mips
+else
+ echo "Doesn't look like a MIPS system."
+ xxx_prompt=n
+ echo "exit 1" >mips
+fi
+chmod +x mips
+$eunicefix mips
+case "$usrinc" in
+'') ;;
+*) dflt="$usrinc";;
+esac
+case "$xxx_prompt" in
+y) fn=d/
+ echo " "
+ rp='Where are the include files you want to use?'
+ . ./getfile
+ usrinc="$ans"
;;
-*)
- dflt="$prefix"
+*) usrinc="$dflt"
;;
esac
-$cat <<EOM
-By default, $package will be installed in $dflt/bin, manual
-pages under $dflt/man, etc..., i.e. with $dflt as prefix for
-all installation directories. Typically set to /usr/local, but you
-may choose /usr if you wish to install $package among your system
-binaries. If you wish to have binaries under /bin but manual pages
-under /usr/local/man, that's ok: you will be prompted separately
-for each of the installation directories, the prefix being only used
-to set the defaults.
+: see how we invoke the C preprocessor
+echo " "
+echo "Now, how can we feed standard input to your C preprocessor..." >&4
+cat <<'EOT' >testcpp.c
+#define ABC abc
+#define XYZ xyz
+ABC.XYZ
+EOT
+cd ..
+if test ! -f cppstdin; then
+ if test "X$osname" = "Xaix" -a "X$gccversion" = X; then
+ # AIX cc -E doesn't show the absolute headerfile
+ # locations but we'll cheat by using the -M flag.
+ echo 'cat >.$$.c; rm -f .$$.u; '"$cc"' ${1+"$@"} -M -c .$$.c 2>/dev/null; test -s .$$.u && awk '"'"'$2 ~ /\.h$/ { print "# 0 \""$2"\"" }'"'"' .$$.u; rm -f .$$.o .$$.u; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' > cppstdin
+ else
+ echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
+ fi
+else
+ echo "Keeping your $hint cppstdin wrapper."
+fi
+chmod 755 cppstdin
+wrapper=`pwd`/cppstdin
+ok='false'
+cd UU
-EOM
-fn=d~
-rp='Installation prefix to use?'
-. ./getfile
-oldprefix=''
-case "$prefix" in
-'') ;;
-*)
- case "$ans" in
- "$prefix") ;;
- *) oldprefix="$prefix";;
+if $test "X$cppstdin" != "X" && \
+ $cppstdin $cppminus <testcpp.c >testcpp.out 2>&1 && \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+then
+ echo "You used to use $cppstdin $cppminus so we'll use that again."
+ case "$cpprun" in
+ '') echo "But let's see if we can live without a wrapper..." ;;
+ *)
+ if $cpprun $cpplast <testcpp.c >testcpp.out 2>&1 && \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+ then
+ echo "(And we'll use $cpprun $cpplast to preprocess directly.)"
+ ok='true'
+ else
+ echo "(However, $cpprun $cpplast does not work, let's see...)"
+ fi
+ ;;
+ esac
+else
+ case "$cppstdin" in
+ '') ;;
+ *)
+ echo "Good old $cppstdin $cppminus does not seem to be of any help..."
+ ;;
+ esac
+fi
+
+if $ok; then
+ : nothing
+elif echo 'Maybe "'"$cc"' -E" will work...'; \
+ $cc -E <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yup, it does."
+ x_cpp="$cc -E"
+ x_minus='';
+elif echo 'Nope...maybe "'"$cc"' -E -" will work...'; \
+ $cc -E - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yup, it does."
+ x_cpp="$cc -E"
+ x_minus='-';
+elif echo 'Nope...maybe "'"$cc"' -P" will work...'; \
+ $cc -P <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yipee, that works!"
+ x_cpp="$cc -P"
+ x_minus='';
+elif echo 'Nope...maybe "'"$cc"' -P -" will work...'; \
+ $cc -P - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "At long last!"
+ x_cpp="$cc -P"
+ x_minus='-';
+elif echo 'No such luck, maybe "'$cpp'" will work...'; \
+ $cpp <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "It works!"
+ x_cpp="$cpp"
+ x_minus='';
+elif echo 'Nixed again...maybe "'$cpp' -" will work...'; \
+ $cpp - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Hooray, it works! I was beginning to wonder."
+ x_cpp="$cpp"
+ x_minus='-';
+elif echo 'Uh-uh. Time to get fancy. Trying a wrapper...'; \
+ $wrapper <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ x_cpp="$wrapper"
+ x_minus=''
+ echo "Eureka!"
+else
+ dflt=''
+ rp="No dice. I can't find a C preprocessor. Name one:"
+ . ./myread
+ x_cpp="$ans"
+ x_minus=''
+ $x_cpp <testcpp.c >testcpp.out 2>&1
+ if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "OK, that will do." >&4
+ else
+echo "Sorry, I can't get that to work. Go find one and rerun Configure." >&4
+ exit 1
+ fi
+fi
+
+case "$ok" in
+false)
+ cppstdin="$x_cpp"
+ cppminus="$x_minus"
+ cpprun="$x_cpp"
+ cpplast="$x_minus"
+ set X $x_cpp
+ shift
+ case "$1" in
+ "$cpp")
+ echo "Perhaps can we force $cc -E using a wrapper..."
+ if $wrapper <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+ then
+ echo "Yup, we can."
+ cppstdin="$wrapper"
+ cppminus='';
+ else
+ echo "Nope, we'll have to live without it..."
+ fi
+ ;;
+ esac
+ case "$cpprun" in
+ "$wrapper")
+ cpprun=''
+ cpplast=''
+ ;;
esac
;;
esac
-prefix="$ans"
-prefixexp="$ansexp"
-
-: set the prefixit variable, to compute a suitable default value
-prefixit='case "$3" in
-""|none)
- case "$oldprefix" in
- "") eval "$1=\"\$$2\"";;
- *)
- case "$3" in
- "") eval "$1=";;
- none)
- eval "tp=\"\$$2\"";
- case "$tp" in
- ""|" ") eval "$1=\"\$$2\"";;
- *) eval "$1=";;
- esac;;
- esac;;
- esac;;
-*)
- eval "tp=\"$oldprefix-\$$2-\""; eval "tp=\"$tp\"";
- case "$tp" in
- --|/*--|\~*--) eval "$1=\"$prefix/$3\"";;
- /*-$oldprefix/*|\~*-$oldprefix/*)
- eval "$1=\`echo \$$2 | sed \"s,^$oldprefix,$prefix,\"\`";;
- *) eval "$1=\"\$$2\"";;
- esac;;
-esac'
-
-: set the base revision
-baserev=5.0
-: get the patchlevel
-echo " "
-echo "Getting the current patchlevel..." >&4
-if $test -r $rsrc/patchlevel.h;then
- patchlevel=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
- subversion=`awk '/define[ ]+PERL_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
-else
- patchlevel=0
- subversion=0
-fi
-$echo $n "(You have $package" $c
-case "$package" in
-"*$baserev") ;;
-*) $echo $n " $baserev" $c ;;
+case "$cppstdin" in
+"$wrapper"|'cppstdin') ;;
+*) $rm -f $wrapper;;
esac
-$echo $n " patchlevel $patchlevel" $c
-test 0 -eq "$subversion" || $echo $n " subversion $subversion" $c
-echo ".)"
-
-if test 0 -eq "$subversion"; then
- version=`LC_ALL=C; export LC_ALL; \
- echo $baserev $patchlevel | \
- $awk '{ printf "%.3f\n", $1 + $2/1000.0 }'`
-else
- version=`LC_ALL=C; export LC_ALL; \
- echo $baserev $patchlevel $subversion | \
- $awk '{ printf "%.5f\n", $1 + $2/1000.0 + $3/100000.0 }'`
-fi
-: Figure out perl API version. Perhaps this should be in patchlevel.h
-if test "$subversion" -lt 50; then
- apiversion=`LC_ALL=C; export LC_ALL; \
- LANGUAGE=C; export LANGUAGE; \
- echo $baserev $patchlevel | \
- $awk '{ printf "%.3f\n", $1 + $2/1000.0 }'`
-else
- apiversion="$version"
-fi
+$rm -f testcpp.c testcpp.out
-: determine where private library files go
-: Usual default is /usr/local/lib/perl5/$version.
-: Also allow things like /opt/perl/lib/$version, since
-: /opt/perl/lib/perl5... would be redundant.
-case "$prefix" in
-*perl*) set dflt privlib lib/$version ;;
-*) set dflt privlib lib/$package/$version ;;
+: Set private lib path
+case "$plibpth" in
+'') if ./mips; then
+ plibpth="$incpath/usr/lib /usr/local/lib /usr/ccs/lib"
+ fi;;
+esac
+case "$libpth" in
+' ') dlist='';;
+'') dlist="$loclibpth $plibpth $glibpth";;
+*) dlist="$libpth";;
esac
-eval $prefixit
-$cat <<EOM
-
-There are some auxiliary files for $package that need to be put into a
-private library directory that is accessible by everyone.
-EOM
-fn=d~+
-rp='Pathname where the private library files will reside?'
-. ./getfile
-if $test "X$privlibexp" != "X$ansexp"; then
- installprivlib=''
-fi
-privlib="$ans"
-privlibexp="$ansexp"
-if $afs; then
- $cat <<EOM
+: Now check and see which directories actually exist, avoiding duplicates
+libpth=''
+for xxx in $dlist
+do
+ if $test -d $xxx; then
+ case " $libpth " in
+ *" $xxx "*) ;;
+ *) libpth="$libpth $xxx";;
+ esac
+ fi
+done
+$cat <<'EOM'
-Since you are running AFS, I need to distinguish the directory in which
-private files reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
+Some systems have incompatible or broken versions of libraries. Among
+the directories listed in the question below, please remove any you
+know not to be holding relevant libraries, and add any that are needed.
+Say "none" for none.
EOM
- case "$installprivlib" in
- '') dflt=`echo $privlibexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installprivlib";;
- esac
- fn=de~
- rp='Where will private files be installed?'
- . ./getfile
- installprivlib="$ans"
-else
- installprivlib="$privlibexp"
-fi
-
-: set the prefixup variable, to restore leading tilda escape
-prefixup='case "$prefixexp" in
-"$prefix") ;;
-*) eval "$1=\`echo \$$1 | sed \"s,^$prefixexp,$prefix,\"\`";;
-esac'
-
-: determine where public architecture dependent libraries go
-set archlib archlib
-eval $prefixit
-: privlib default is /usr/local/lib/$package/$version
-: archlib default is /usr/local/lib/$package/$version/$archname
-: privlib may have an optional trailing /share.
-tdflt=`echo $privlib | $sed 's,/share$,,'`
-tdflt=$tdflt/$archname
-case "$archlib" in
-'') dflt=$tdflt
+case "$libpth" in
+'') dflt='none';;
+*)
+ set X $libpth
+ shift
+ dflt=${1+"$@"}
;;
-*) dflt="$archlib"
- ;;
esac
-cat <<EOM
-
-$spackage contains architecture-dependent library files. If you are
-sharing libraries in a heterogeneous environment, you might store
-these files in a separate location. Otherwise, you can just include
-them with the rest of the public library files.
-
-EOM
-fn=d+~
-rp='Where do you want to put the public architecture-dependent libraries?'
-. ./getfile
-archlib="$ans"
-archlibexp="$ansexp"
+rp="Directories to use for library searches?"
+. ./myread
+case "$ans" in
+none) libpth=' ';;
+*) libpth="$ans";;
+esac
-if $afs; then
- $cat <<EOM
+: compute shared library extension
+case "$so" in
+'')
+ if xxx=`./loc libc.sl X $libpth`; $test -f "$xxx"; then
+ dflt='sl'
+ else
+ dflt='so'
+ fi
+ ;;
+*) dflt="$so";;
+esac
+$cat <<EOM
-Since you are running AFS, I need to distinguish the directory in
-which architecture-dependent library files reside from the directory
-in which they are installed (and from which they are presumably copied
-to the former directory by occult means).
+On some systems, shared libraries may be available. Answer 'none' if
+you want to suppress searching of shared libraries for the remainder
+of this configuration.
EOM
- case "$installarchlib" in
- '') dflt=`echo $archlibexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installarchlib";;
- esac
- fn=de~
- rp='Where will architecture-dependent library files be installed?'
- . ./getfile
- installarchlib="$ans"
-else
- installarchlib="$archlibexp"
-fi
-if $test X"$archlib" = X"$privlib"; then
- d_archlib="$undef"
-else
- d_archlib="$define"
-fi
+rp='What is the file extension used for shared libraries?'
+. ./myread
+so="$ans"
-: make some quick guesses about what we are up against
-echo " "
-$echo $n "Hmm... $c"
-echo exit 1 >bsd
-echo exit 1 >usg
-echo exit 1 >v7
-echo exit 1 >osf1
-echo exit 1 >eunice
-echo exit 1 >xenix
-echo exit 1 >venix
-echo exit 1 >os2
-d_bsd="$undef"
-$cat /usr/include/signal.h /usr/include/sys/signal.h >foo 2>/dev/null
-if test -f /osf_boot || $contains 'OSF/1' /usr/include/ctype.h >/dev/null 2>&1
-then
- echo "Looks kind of like an OSF/1 system, but we'll see..."
- echo exit 0 >osf1
-elif test `echo abc | tr a-z A-Z` = Abc ; then
- xxx=`./loc addbib blurfl $pth`
- if $test -f $xxx; then
- echo "Looks kind of like a USG system with BSD features, but we'll see..."
- echo exit 0 >bsd
- echo exit 0 >usg
- else
- if $contains SIGTSTP foo >/dev/null 2>&1 ; then
- echo "Looks kind of like an extended USG system, but we'll see..."
- else
- echo "Looks kind of like a USG system, but we'll see..."
- fi
- echo exit 0 >usg
- fi
-elif $contains SIGTSTP foo >/dev/null 2>&1 ; then
- echo "Looks kind of like a BSD system, but we'll see..."
- d_bsd="$define"
- echo exit 0 >bsd
-else
- echo "Looks kind of like a Version 7 system, but we'll see..."
- echo exit 0 >v7
-fi
-case "$eunicefix" in
-*unixtovms*)
- $cat <<'EOI'
-There is, however, a strange, musty smell in the air that reminds me of
-something...hmm...yes...I've got it...there's a VMS nearby, or I'm a Blit.
-EOI
- echo exit 0 >eunice
- d_eunice="$define"
-: it so happens the Eunice I know will not run shell scripts in Unix format
+: Define several unixisms.
+: Hints files or command line option can be used to override them.
+: The convoluted testing is in case hints files set either the old
+: or the new name.
+case "$_exe" in
+'') case "$exe_ext" in
+ '') ;;
+ *) _exe="$exe_ext" ;;
+ esac
;;
-*)
- echo " "
- echo "Congratulations. You aren't running Eunice."
- d_eunice="$undef"
+esac
+case "$_a" in
+'') case "$lib_ext" in
+ '') _a='.a';;
+ *) _a="$lib_ext" ;;
+ esac
+ ;;
+esac
+case "$_o" in
+'') case "$obj_ext" in
+ '') _o='.o';;
+ *) _o="$obj_ext";;
+ esac
;;
esac
-: Detect OS2. The p_ variable is set above in the Head.U unit.
case "$p_" in
-:) ;;
-*)
- $cat <<'EOI'
-I have the feeling something is not exactly right, however...don't tell me...
-lemme think...does HAL ring a bell?...no, of course, you're only running OS/2!
-EOI
- echo exit 0 >os2
+'') case "$path_sep" in
+ '') p_=':';;
+ *) p_="$path_sep";;
+ esac
;;
esac
-if test -f /xenix; then
- echo "Actually, this looks more like a XENIX system..."
- echo exit 0 >xenix
- d_xenix="$define"
-else
- echo " "
- echo "It's not Xenix..."
- d_xenix="$undef"
-fi
-chmod +x xenix
-$eunicefix xenix
-if test -f /venix; then
- echo "Actually, this looks more like a VENIX system..."
- echo exit 0 >venix
-else
- echo " "
- if ./xenix; then
- : null
- else
- echo "Nor is it Venix..."
- fi
-fi
-chmod +x bsd usg v7 osf1 eunice xenix venix os2
-$eunicefix bsd usg v7 osf1 eunice xenix venix os2
-$rm -f foo
+exe_ext=$_exe
+lib_ext=$_a
+obj_ext=$_o
+path_sep=$p_
-: see if setuid scripts can be secure
-$cat <<EOM
+: Which makefile gets called first. This is used by make depend.
+case "$firstmakefile" in
+'') firstmakefile='makefile';;
+esac
-Some kernels have a bug that prevents setuid #! scripts from being
-secure. Some sites have disabled setuid #! scripts because of this.
+case "$usesocks" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+cat <<EOM
-First let's decide if your kernel supports secure setuid #! scripts.
-(If setuid #! scripts would be secure but have been disabled anyway,
-don't say that they are secure if asked.)
+Perl can be built to use the SOCKS proxy protocol library. To do so,
+Configure must be run with -Dusesocks.
+If this doesn't make any sense to you, just accept the default '$dflt'.
EOM
+rp='Build Perl for SOCKS?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set usesocks
+eval $setvar
-val="$undef"
-if $test -d /dev/fd; then
- echo "#!$ls" >reflect
- chmod +x,u+s reflect
- ./reflect >flect 2>&1
- if $contains "/dev/fd" flect >/dev/null; then
- echo "Congratulations, your kernel has secure setuid scripts!" >&4
- val="$define"
- else
- $cat <<EOM
-If you are not sure if they are secure, I can check but I'll need a
-username and password different from the one you are using right now.
-If you don't have such a username or don't want me to test, simply
-enter 'none'.
-
-EOM
- rp='Other username to test security of setuid scripts with?'
- dflt='none'
- . ./myread
- case "$ans" in
- n|none)
- case "$d_suidsafe" in
- '') echo "I'll assume setuid scripts are *not* secure." >&4
- dflt=n;;
- "$undef")
- echo "Well, the $hint value is *not* secure." >&4
- dflt=n;;
- *) echo "Well, the $hint value *is* secure." >&4
- dflt=y;;
- esac
- ;;
- *)
- $rm -f reflect flect
- echo "#!$ls" >reflect
- chmod +x,u+s reflect
- echo >flect
- chmod a+w flect
- echo '"su" will (probably) prompt you for '"$ans's password."
- su $ans -c './reflect >flect'
- if $contains "/dev/fd" flect >/dev/null; then
- echo "Okay, it looks like setuid scripts are secure." >&4
- dflt=y
- else
- echo "I don't think setuid scripts are secure." >&4
- dflt=n
- fi
- ;;
+: Looking for optional libraries
+echo " "
+echo "Checking for optional libraries..." >&4
+case "$libs" in
+' '|'') dflt='';;
+*) dflt="$libs";;
+esac
+case "$libswanted" in
+'') libswanted='c_s';;
+esac
+case "$usesocks" in
+"$define") libswanted="$libswanted socks5 socks5_sh" ;;
+esac
+libsfound=''
+libsfiles=''
+libsdirs=''
+libspath=''
+for thisdir in $libpth $xlibpth; do
+ test -d $thisdir && libspath="$libspath $thisdir"
+done
+for thislib in $libswanted; do
+ for thisdir in $libspath; do
+ xxx=''
+ if $test ! -f "$xxx" -a "X$ignore_versioned_solibs" = "X"; then
+ xxx=`ls $thisdir/lib$thislib.$so.[0-9] 2>/dev/null|tail -1`
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=shared
+ fi
+ if test ! -f "$xxx"; then
+ xxx=$thisdir/lib$thislib.$so
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=shared
+ fi
+ if test ! -f "$xxx"; then
+ xxx=$thisdir/lib$thislib$_a
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=static
+ fi
+ if test ! -f "$xxx"; then
+ xxx=$thisdir/$thislib$_a
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=static
+ fi
+ if test ! -f "$xxx"; then
+ xxx=$thisdir/lib${thislib}_s$_a
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=static
+ $test -f "$xxx" && thislib=${thislib}_s
+ fi
+ if test ! -f "$xxx"; then
+ xxx=$thisdir/Slib$thislib$_a
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=static
+ fi
+ if $test -f "$xxx"; then
+ case "$libstyle" in
+ shared) echo "Found -l$thislib (shared)." ;;
+ static) echo "Found -l$thislib." ;;
+ *) echo "Found -l$thislib ($libstyle)." ;;
esac
- rp='Does your kernel have *secure* setuid scripts?'
- . ./myread
- case "$ans" in
- [yY]*) val="$define";;
- *) val="$undef";;
+ case " $dflt " in
+ *"-l$thislib "*);;
+ *) dflt="$dflt -l$thislib"
+ libsfound="$libsfound $xxx"
+ yyy=`basename $xxx`
+ libsfiles="$libsfiles $yyy"
+ yyy=`echo $xxx|$sed -e "s%/$yyy\\$%%"`
+ case " $libsdirs " in
+ *" $yyy "*) ;;
+ *) libsdirs="$libsdirs $yyy" ;;
+ esac
+ ;;
esac
+ break
+ fi
+ done
+ if $test ! -f "$xxx"; then
+ echo "No -l$thislib."
fi
-else
- echo "I don't think setuid scripts are secure (no /dev/fd directory)." >&4
- echo "(That's for file descriptors, not floppy disks.)"
- val="$undef"
-fi
-set d_suidsafe
-eval $setvar
+done
+set X $dflt
+shift
+dflt="$*"
+case "$libs" in
+'') dflt="$dflt";;
+*) dflt="$libs";;
+esac
+case "$dflt" in
+' '|'') dflt='none';;
+esac
-$rm -f reflect flect
+$cat <<EOM
+
+In order to compile $package on your machine, a number of libraries
+are usually needed. Include any other special libraries here as well.
+Say "none" for none. The default list is almost always right.
+EOM
-: now see if they want to do setuid emulation
echo " "
-val="$undef"
-case "$d_suidsafe" in
-"$define")
- val="$undef"
- echo "No need to emulate SUID scripts since they are secure here." >& 4
- ;;
-*)
- $cat <<EOM
-Some systems have disabled setuid scripts, especially systems where
-setuid scripts cannot be secure. On systems where setuid scripts have
-been disabled, the setuid/setgid bits on scripts are currently
-useless. It is possible for $package to detect those bits and emulate
-setuid/setgid in a secure fashion. This emulation will only work if
-setuid scripts have been disabled in your kernel.
+rp="What libraries to use?"
+. ./myread
+case "$ans" in
+none) libs=' ';;
+*) libs="$ans";;
+esac
-EOM
- case "$d_dosuid" in
- "$define") dflt=y ;;
- *) dflt=n ;;
+: determine optimization, if desired, or use for debug flag also
+case "$optimize" in
+' '|$undef) dflt='none';;
+'') dflt='-O';;
+*) dflt="$optimize";;
+esac
+$cat <<EOH
+
+By default, $package compiles with the -O flag to use the optimizer.
+Alternately, you might want to use the symbolic debugger, which uses
+the -g flag (on traditional Unix systems). Either flag can be
+specified here. To use neither flag, specify the word "none".
+
+EOH
+rp="What optimizer/debugger flag should be used?"
+. ./myread
+optimize="$ans"
+case "$optimize" in
+'none') optimize=" ";;
+esac
+
+dflt=''
+: We will not override a previous value, but we might want to
+: augment a hint file
+case "$hint" in
+default|recommended)
+ case "$gccversion" in
+ 1*) dflt='-fpcc-struct-return' ;;
esac
- rp="Do you want to do setuid/setgid emulation?"
- . ./myread
- case "$ans" in
- [yY]*) val="$define";;
- *) val="$undef";;
+ case "$optimize" in
+ *-g*) dflt="$dflt -DDEBUGGING";;
+ esac
+ case "$gccversion" in
+ 2*) if test -d /etc/conf/kconfig.d &&
+ $contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
+ then
+ dflt="$dflt -posix"
+ fi
+ ;;
+ esac
+ case "$gccversion" in
+ 1*) ;;
+ 2.[0-8]*) ;;
+ ?*) echo " "
+ echo "Checking if your compiler accepts -fno-strict-aliasing" 2>&1
+ echo 'int main(void) { return 0; }' > gcctest.c
+ if $cc -O2 -fno-strict-aliasing -o gcctest gcctest.c; then
+ echo "Yes, it does." 2>&1
+ case "$ccflags" in
+ *strict-aliasing*)
+ echo "Leaving current flags $ccflags alone." 2>&1
+ ;;
+ *) dflt="$dflt -fno-strict-aliasing" ;;
+ esac
+ else
+ echo "Nope, it doesn't, but that's ok." 2>&1
+ fi
+ ;;
esac
;;
esac
-set d_dosuid
-eval $setvar
-: determine where manual pages are on this system
-echo " "
-case "$sysman" in
-'')
- syspath='/usr/man/man1 /usr/man/mann /usr/man/manl /usr/man/local/man1'
- syspath="$syspath /usr/man/u_man/man1 /usr/share/man/man1"
- syspath="$syspath /usr/catman/u_man/man1 /usr/man/l_man/man1"
- syspath="$syspath /usr/local/man/u_man/man1 /usr/local/man/l_man/man1"
- syspath="$syspath /usr/man/man.L /local/man/man1 /usr/local/man/man1"
- sysman=`./loc . /usr/man/man1 $syspath`
- ;;
+case "$mips_type" in
+*BSD*|'') inclwanted="$locincpth $usrinc";;
+*) inclwanted="$locincpth $inclwanted $usrinc/bsd";;
esac
-if $test -d "$sysman"; then
- echo "System manual is in $sysman." >&4
+for thisincl in $inclwanted; do
+ if $test -d $thisincl; then
+ if $test x$thisincl != x$usrinc; then
+ case "$dflt" in
+ *$thisincl*);;
+ *) dflt="$dflt -I$thisincl";;
+ esac
+ fi
+ fi
+done
+
+inctest='if $contains $2 $usrinc/$1 >/dev/null 2>&1; then
+ xxx=true;
+elif $contains $2 $usrinc/sys/$1 >/dev/null 2>&1; then
+ xxx=true;
else
- echo "Could not find manual pages in source form." >&4
-fi
+ xxx=false;
+fi;
+if $xxx; then
+ case "$dflt" in
+ *$2*);;
+ *) dflt="$dflt -D$2";;
+ esac;
+fi'
-: see what memory models we can support
-case "$models" in
-'')
- $cat >pdp11.c <<'EOP'
-int main() {
-#ifdef pdp11
- exit(0);
-#else
- exit(1);
-#endif
-}
-EOP
- ( cc -o pdp11 pdp11.c ) >/dev/null 2>&1
- if $test -f pdp11 && ./pdp11 2>/dev/null; then
- dflt='unsplit split'
- else
- tans=`./loc . X /lib/small /lib/large /usr/lib/small /usr/lib/large /lib/medium /usr/lib/medium /lib/huge`
- case "$tans" in
- X) dflt='none';;
- *) if $test -d /lib/small || $test -d /usr/lib/small; then
- dflt='small'
- else
- dflt=''
- fi
- if $test -d /lib/medium || $test -d /usr/lib/medium; then
- dflt="$dflt medium"
- fi
- if $test -d /lib/large || $test -d /usr/lib/large; then
- dflt="$dflt large"
- fi
- if $test -d /lib/huge || $test -d /usr/lib/huge; then
- dflt="$dflt huge"
- fi
- esac
- fi;;
-*) dflt="$models";;
+set signal.h LANGUAGE_C; eval $inctest
+
+case "$usesocks" in
+$define)
+ ccflags="$ccflags -DSOCKS"
+ ;;
esac
-$cat <<EOM
-
-Some systems have different model sizes. On most systems they are called
-small, medium, large, and huge. On the PDP11 they are called unsplit and
-split. If your system doesn't support different memory models, say "none".
-If you wish to force everything to one memory model, say "none" here and
-put the appropriate flags later when it asks you for other cc and ld flags.
-Venix systems may wish to put "none" and let the compiler figure things out.
-(In the following question multiple model names should be space separated.)
-The default for most systems is "none".
+case "$hint" in
+default|recommended) dflt="$ccflags $dflt" ;;
+*) dflt="$ccflags";;
+esac
-EOM
-rp="Which memory models are supported?"
+case "$dflt" in
+''|' ') dflt=none;;
+esac
+$cat <<EOH
+
+Your C compiler may want other flags. For this question you should include
+-I/whatever and -DWHATEVER flags and any other flags used by the C compiler,
+but you should NOT include libraries or ld flags like -lwhatever. If you
+want $package to honor its debug switch, you should include -DDEBUGGING here.
+Your C compiler might also need additional flags, such as -D_POSIX_SOURCE.
+
+To use no flags, specify the word "none".
+
+EOH
+set X $dflt
+shift
+dflt=${1+"$@"}
+rp="Any additional cc flags?"
. ./myread
-models="$ans"
+case "$ans" in
+none) ccflags='';;
+*) ccflags="$ans";;
+esac
-case "$models" in
-none)
- small=''
- medium=''
- large=''
- huge=''
- unsplit=''
- split=''
- ;;
-*split)
- case "$split" in
- '') if $contains '\-i' $sysman/ld.1 >/dev/null 2>&1 || \
- $contains '\-i' $sysman/cc.1 >/dev/null 2>&1; then
- dflt='-i'
- else
- dflt='none'
- fi;;
- *) dflt="$split";;
- esac
- rp="What flag indicates separate I and D space?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';;
- esac
- split="$tans"
- unsplit='';;
-*large*|*small*|*medium*|*huge*)
- case "$models" in
- *large*)
- case "$large" in
- '') dflt='-Ml';;
- *) dflt="$large";;
- esac
- rp="What flag indicates large model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- large="$tans";;
- *) large='';;
- esac
- case "$models" in
- *huge*) case "$huge" in
- '') dflt='-Mh';;
- *) dflt="$huge";;
- esac
- rp="What flag indicates huge model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- huge="$tans";;
- *) huge="$large";;
- esac
- case "$models" in
- *medium*) case "$medium" in
- '') dflt='-Mm';;
- *) dflt="$medium";;
- esac
- rp="What flag indicates medium model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- medium="$tans";;
- *) medium="$large";;
- esac
- case "$models" in
- *small*) case "$small" in
- '') dflt='none';;
- *) dflt="$small";;
- esac
- rp="What flag indicates small model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- small="$tans";;
- *) small='';;
- esac
- ;;
+: the following weeds options from ccflags that are of no interest to cpp
+cppflags="$ccflags"
+case "$gccversion" in
+1*) cppflags="$cppflags -D__GNUC__"
+esac
+case "$mips_type" in
+'');;
+*BSD*) cppflags="$cppflags -DSYSTYPE_BSD43";;
+esac
+case "$cppflags" in
+'');;
*)
- echo "Unrecognized memory models--you may have to edit Makefile.SH" >&4
+ echo " "
+ echo "Let me guess what the preprocessor flags are..." >&4
+ set X $cppflags
+ shift
+ cppflags=''
+ $cat >cpp.c <<'EOM'
+#define BLURFL foo
+
+BLURFL xx LFRULB
+EOM
+ previous=''
+ for flag in $*
+ do
+ case "$flag" in
+ -*) ftry="$flag";;
+ *) ftry="$previous $flag";;
+ esac
+ if $cppstdin -DLFRULB=bar $cppflags $ftry $cppminus <cpp.c \
+ >cpp1.out 2>/dev/null && \
+ $cpprun -DLFRULB=bar $cppflags $ftry $cpplast <cpp.c \
+ >cpp2.out 2>/dev/null && \
+ $contains 'foo.*xx.*bar' cpp1.out >/dev/null 2>&1 && \
+ $contains 'foo.*xx.*bar' cpp2.out >/dev/null 2>&1
+ then
+ cppflags="$cppflags $ftry"
+ previous=''
+ else
+ previous="$flag"
+ fi
+ done
+ set X $cppflags
+ shift
+ cppflags=${1+"$@"}
+ case "$cppflags" in
+ *-*) echo "They appear to be: $cppflags";;
+ esac
+ $rm -f cpp.c cpp?.out
;;
esac
-$rm -f pdp11.* pdp11
-: see if we need a special compiler
-echo " "
-if ./usg; then
- case "$cc" in
- '') case "$Mcc" in
- /*) dflt='Mcc';;
- *) case "$large" in
- -M*) dflt='cc';;
- *) if $contains '\-M' $sysman/cc.1 >/dev/null 2>&1 ; then
- if $contains '\-M' $sysman/cpp.1 >/dev/null 2>&1; then
- dflt='cc'
- else
- dflt='cc -M'
- fi
- else
- dflt='cc'
- fi;;
- esac;;
- esac;;
- *) dflt="$cc";;
+: flags used in final linking phase
+case "$ldflags" in
+'') if ./venix; then
+ dflt='-i -z'
+ else
+ dflt=''
+ fi
+ case "$ccflags" in
+ *-posix*) dflt="$dflt -posix" ;;
esac
- case "$dflt" in
- *M*) $cat <<'EOM'
-On some older systems the default C compiler will not resolve multiple global
-references that happen to have the same name. On some such systems the "Mcc"
-command may be used to force these to be resolved. On other systems a "cc -M"
-command is required. (Note that the -M flag on other systems indicates a
-memory model to use!) If you have the Gnu C compiler, you might wish to use
-that instead.
-
-EOM
;;
+*) dflt="$ldflags";;
+esac
+
+: Try to guess additional flags to pick up local libraries.
+for thislibdir in $libpth; do
+ case " $loclibpth " in
+ *" $thislibdir "*)
+ case "$dflt " in
+ *"-L$thislibdir "*) ;;
+ *) dflt="$dflt -L$thislibdir" ;;
+ esac
+ ;;
esac
- rp="Use which C compiler?"
- . ./myread
- cc="$ans"
-else
- case "$cc" in
- '') dflt=cc;;
- *) dflt="$cc";;
- esac
- rp="Use which C compiler?"
- . ./myread
- cc="$ans"
-fi
-: Look for a hint-file generated 'call-back-unit'. Now that the
-: user has specified the compiler, we may need to set or change some
-: other defaults.
-if $test -f cc.cbu; then
- . ./cc.cbu
-fi
+done
+
+case "$dflt" in
+'') dflt='none' ;;
+esac
+
+$cat <<EOH
+
+Your C linker may need flags. For this question you should
+include -L/whatever and any other flags used by the C linker, but you
+should NOT include libraries like -lwhatever.
+
+Make sure you include the appropriate -L/path flags if your C linker
+does not normally search all of the directories you specified above,
+namely
+ $libpth
+To use no flags, specify the word "none".
+
+EOH
+
+rp="Any additional ld flags (NOT including libraries)?"
+. ./myread
+case "$ans" in
+none) ldflags='';;
+*) ldflags="$ans";;
+esac
+rmlist="$rmlist pdp11"
+
+: coherency check
echo " "
-echo "Checking for GNU cc in disguise and/or its version number..." >&4
-$cat >gccvers.c <<EOM
+echo "Checking your choice of C compiler and flags for coherency..." >&4
+$cat > try.c <<'EOF'
#include <stdio.h>
-int main() {
-#ifdef __GNUC__
-#ifdef __VERSION__
- printf("%s\n", __VERSION__);
-#else
- printf("%s\n", "1");
-#endif
-#endif
- exit(0);
-}
+int main() { printf("Ok\n"); exit(0); }
+EOF
+set X $cc $optimize $ccflags -o try $ldflags try.c $libs
+shift
+$cat >try.msg <<'EOM'
+I've tried to compile and run the following simple program:
+
EOM
-if $cc -o gccvers gccvers.c; then
- gccversion=`./gccvers`
- case "$gccversion" in
- '') echo "You are not using GNU cc." ;;
- *) echo "You are using GNU cc $gccversion." ;;
- esac
+$cat try.c >> try.msg
+
+$cat >> try.msg <<EOM
+
+I used the command:
+
+ $*
+ ./try
+
+and I got the following output:
+
+EOM
+dflt=y
+if sh -c "$cc $optimize $ccflags -o try $ldflags try.c $libs" >>try.msg 2>&1; then
+ if sh -c './try' >>try.msg 2>&1; then
+ xxx=`./try`
+ case "$xxx" in
+ "Ok") dflt=n ;;
+ *) echo 'The program compiled OK, but produced no output.' >> try.msg
+ case " $libs " in
+ *" -lsfio "*)
+ cat >> try.msg <<'EOQS'
+If $libs contains -lsfio, and sfio is mis-configured, then it
+sometimes (apparently) runs and exits with a 0 status, but with no
+output! It may have to do with sfio's use of _exit vs. exit.
+
+EOQS
+ rp="You have a big problem. Shall I abort Configure"
+ dflt=y
+ ;;
+ esac
+ ;;
+ esac
+ else
+ echo "The program compiled OK, but exited with status $?." >>try.msg
+ rp="You have a problem. Shall I abort Configure"
+ dflt=y
+ fi
else
- echo " "
- echo "*** WHOA THERE!!! ***" >&4
- echo " Your C compiler \"$cc\" doesn't seem to be working!" >&4
+ echo "I can't compile the test program." >>try.msg
+ rp="You have a BIG problem. Shall I abort Configure"
+ dflt=y
+fi
+case "$dflt" in
+y)
+ $cat try.msg >&4
case "$knowitall" in
'')
- echo " You'd better start hunting for one and let me know about it." >&4
+ echo "(The supplied flags or libraries might be incorrect.)"
+ ;;
+ *) dflt=n;;
+ esac
+ echo " "
+ . ./myread
+ case "$ans" in
+ n*|N*) ;;
+ *) echo "Ok. Stopping Configure." >&4
exit 1
;;
esac
-fi
-$rm -f gccvers*
-case "$gccversion" in
-1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
+ ;;
+n) echo "OK, that should do.";;
esac
+$rm -f try try.* core
+
+: define an is-a-typedef? function
+typedef='type=$1; var=$2; def=$3; shift; shift; shift; inclist=$@;
+case "$inclist" in
+"") inclist="sys/types.h";;
+esac;
+eval "varval=\$$var";
+case "$varval" in
+"")
+ $rm -f temp.c;
+ for inc in $inclist; do
+ echo "#include <$inc>" >>temp.c;
+ done;
+ echo "#ifdef $type" >> temp.c;
+ echo "printf(\"We have $type\");" >> temp.c;
+ echo "#endif" >> temp.c;
+ $cppstdin $cppflags $cppminus < temp.c >temp.E 2>/dev/null;
+ if $contains $type temp.E >/dev/null 2>&1; then
+ eval "$var=\$type";
+ else
+ eval "$var=\$def";
+ fi;
+ $rm -f temp.?;;
+*) eval "$var=\$varval";;
+esac'
+
+: define an is-a-typedef? function that prompts if the type is not available.
+typedef_ask='type=$1; var=$2; def=$3; shift; shift; shift; inclist=$@;
+case "$inclist" in
+"") inclist="sys/types.h";;
+esac;
+eval "varval=\$$var";
+case "$varval" in
+"")
+ $rm -f temp.c;
+ for inc in $inclist; do
+ echo "#include <$inc>" >>temp.c;
+ done;
+ echo "#ifdef $type" >> temp.c;
+ echo "printf(\"We have $type\");" >> temp.c;
+ echo "#endif" >> temp.c;
+ $cppstdin $cppflags $cppminus < temp.c >temp.E 2>/dev/null;
+ echo " " ;
+ echo "$rp" | $sed -e "s/What is/Looking for/" -e "s/?/./";
+ if $contains $type temp.E >/dev/null 2>&1; then
+ echo "$type found." >&4;
+ eval "$var=\$type";
+ else
+ echo "$type NOT found." >&4;
+ dflt="$def";
+ . ./myread ;
+ eval "$var=\$ans";
+ fi;
+ $rm -f temp.?;;
+*) eval "$var=\$varval";;
+esac'
+
+: define a shorthand compile call
+compile='
+mc_file=$1;
+shift;
+$cc $optimize $ccflags $ldflags -o ${mc_file} $* ${mc_file}.c $libs > /dev/null 2>&1;'
+: define a shorthand compile call for compilations that should be ok.
+compile_ok='
+mc_file=$1;
+shift;
+$cc $optimize $ccflags $ldflags -o ${mc_file} $* ${mc_file}.c $libs;'
-: What should the include directory be ?
+: check for lengths of integral types
echo " "
-$echo $n "Hmm... $c"
-dflt='/usr/include'
-incpath=''
-mips_type=''
-if $test -f /bin/mips && /bin/mips; then
- echo "Looks like a MIPS system..."
- $cat >usr.c <<'EOCP'
-#ifdef SYSTYPE_BSD43
-/bsd43
-#endif
+case "$intsize" in
+'')
+ echo "Checking to see how big your integers are..." >&4
+ $cat >intsize.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("intsize=%d;\n", (int)sizeof(int));
+ printf("longsize=%d;\n", (int)sizeof(long));
+ printf("shortsize=%d;\n", (int)sizeof(short));
+ exit(0);
+}
EOCP
- if $cc -E usr.c > usr.out && $contains / usr.out >/dev/null 2>&1; then
- dflt='/bsd43/usr/include'
- incpath='/bsd43'
- mips_type='BSD 4.3'
+ set intsize
+ if eval $compile_ok && ./intsize > /dev/null; then
+ eval `./intsize`
+ echo "Your integers are $intsize bytes long."
+ echo "Your long integers are $longsize bytes long."
+ echo "Your short integers are $shortsize bytes long."
else
- mips_type='System V'
+ $cat >&4 <<EOM
+!
+Help! I can't compile and run the intsize test program: please enlighten me!
+(This is probably a misconfiguration in your system or libraries, and
+you really ought to fix it. Still, I'll try anyway.)
+!
+EOM
+ dflt=4
+ rp="What is the size of an integer (in bytes)?"
+ . ./myread
+ intsize="$ans"
+ dflt=$intsize
+ rp="What is the size of a long integer (in bytes)?"
+ . ./myread
+ longsize="$ans"
+ dflt=2
+ rp="What is the size of a short integer (in bytes)?"
+ . ./myread
+ shortsize="$ans"
fi
- $rm -f usr.c usr.out
- echo "and you're compiling with the $mips_type compiler and libraries."
- xxx_prompt=y
- echo "exit 0" >mips
-else
- echo "Doesn't look like a MIPS system."
- xxx_prompt=n
- echo "exit 1" >mips
-fi
-chmod +x mips
-$eunicefix mips
-case "$usrinc" in
-'') ;;
-*) dflt="$usrinc";;
-esac
-case "$xxx_prompt" in
-y) fn=d/
- echo " "
- rp='Where are the include files you want to use?'
- . ./getfile
- usrinc="$ans"
- ;;
-*) usrinc="$dflt"
;;
esac
+$rm -f intsize intsize.*
+
+: see what type lseek is declared as in the kernel
+rp="What is the type used for lseek's offset on this system?"
+set off_t lseektype long stdio.h sys/types.h
+eval $typedef_ask
-: see how we invoke the C preprocessor
echo " "
-echo "Now, how can we feed standard input to your C preprocessor..." >&4
-cat <<'EOT' >testcpp.c
-#define ABC abc
-#define XYZ xyz
-ABC.XYZ
-EOT
-cd ..
-if test ! -f cppstdin; then
- echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
+echo "Checking to see how big your file offsets are..." >&4
+$cat >try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", (int)sizeof($lseektype));
+ return(0);
+}
+EOCP
+set try
+if eval $compile_ok; then
+ lseeksize=`./try`
+ echo "Your file offsets are $lseeksize bytes long."
else
- echo "Keeping your $hint cppstdin wrapper."
+ dflt=$longsize
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of your file offsets (in bytes)?"
+ . ./myread
+ lseeksize="$ans"
fi
-chmod 755 cppstdin
-wrapper=`pwd`/cppstdin
-ok='false'
-cd UU
+$rm -f try.c try
-if $test "X$cppstdin" != "X" && \
- $cppstdin $cppminus <testcpp.c >testcpp.out 2>&1 && \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
-then
- echo "You used to use $cppstdin $cppminus so we'll use that again."
- case "$cpprun" in
- '') echo "But let's see if we can live without a wrapper..." ;;
- *)
- if $cpprun $cpplast <testcpp.c >testcpp.out 2>&1 && \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
- then
- echo "(And we'll use $cpprun $cpplast to preprocess directly.)"
- ok='true'
- else
- echo "(However, $cpprun $cpplast does not work, let's see...)"
- fi
+: see what type file positions are declared as in the library
+rp="What is the type for file position used by fsetpos()?"
+set fpos_t fpostype long stdio.h sys/types.h
+eval $typedef_ask
+
+echo " "
+case "$fpostype" in
+*_t) zzz="$fpostype" ;;
+*) zzz="fpos_t" ;;
+esac
+echo "Checking the size of $zzz..." >&4
+cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ printf("%d\n", (int)sizeof($fpostype));
+ exit(0);
+}
+EOCP
+set try
+if eval $compile_ok; then
+ yyy=`./try`
+ case "$yyy" in
+ '') fpossize=4
+ echo "(I can't execute the test program--guessing $fpossize.)" >&4
;;
- esac
-else
- case "$cppstdin" in
- '') ;;
- *)
- echo "Good old $cppstdin $cppminus does not seem to be of any help..."
+ *) fpossize=$yyy
+ echo "Your $zzz is $fpossize bytes long."
;;
esac
-fi
-
-if $ok; then
- : nothing
-elif echo 'Maybe "'"$cc"' -E" will work...'; \
- $cc -E <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yup, it does."
- x_cpp="$cc -E"
- x_minus='';
-elif echo 'Nope...maybe "'"$cc"' -E -" will work...'; \
- $cc -E - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yup, it does."
- x_cpp="$cc -E"
- x_minus='-';
-elif echo 'Nope...maybe "'"$cc"' -P" will work...'; \
- $cc -P <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yipee, that works!"
- x_cpp="$cc -P"
- x_minus='';
-elif echo 'Nope...maybe "'"$cc"' -P -" will work...'; \
- $cc -P - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "At long last!"
- x_cpp="$cc -P"
- x_minus='-';
-elif echo 'No such luck, maybe "'$cpp'" will work...'; \
- $cpp <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "It works!"
- x_cpp="$cpp"
- x_minus='';
-elif echo 'Nixed again...maybe "'$cpp' -" will work...'; \
- $cpp - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Hooray, it works! I was beginning to wonder."
- x_cpp="$cpp"
- x_minus='-';
-elif echo 'Uh-uh. Time to get fancy. Trying a wrapper...'; \
- $wrapper <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- x_cpp="$wrapper"
- x_minus=''
- echo "Eureka!"
else
- dflt=''
- rp="No dice. I can't find a C preprocessor. Name one:"
+ dflt="$longsize"
+ echo " " >&4
+ echo "(I can't compile the test program. Guessing...)" >&4
+ rp="What is the size of your file positions (in bytes)?"
. ./myread
- x_cpp="$ans"
- x_minus=''
- $x_cpp <testcpp.c >testcpp.out 2>&1
- if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "OK, that will do." >&4
- else
-echo "Sorry, I can't get that to work. Go find one and rerun Configure." >&4
- exit 1
- fi
+ fpossize="$ans"
fi
-case "$ok" in
-false)
- cppstdin="$x_cpp"
- cppminus="$x_minus"
- cpprun="$x_cpp"
- cpplast="$x_minus"
- set X $x_cpp
- shift
- case "$1" in
- "$cpp")
- echo "Perhaps can we force $cc -E using a wrapper..."
- if $wrapper <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
- then
- echo "Yup, we can."
- cppstdin="$wrapper"
- cppminus='';
+
+
+# Backward compatibility (uselfs is deprecated).
+case "$uselfs" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** Configure -Duselfs is deprecated, using -Duselargefiles instead.
+EOM
+ uselargefiles="$define"
+ ;;
+esac
+
+case "$lseeksize:$fpossize" in
+8:8) cat <<EOM
+
+You can have files larger than 2 gigabytes.
+EOM
+ val="$define" ;;
+*) case "$uselargefiles" in
+ "$undef"|false|[nN]*) dflt='n' ;;
+ *) dflt='y' ;;
+ esac
+ cat <<EOM
+
+Perl can be built to understand large files (files larger than 2 gigabytes)
+on some systems. To do so, Configure can be run with -Duselargefiles.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+ rp='Try to understand large files, if available?'
+ . ./myread
+ case "$ans" in
+ y|Y) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ ;;
+esac
+set uselargefiles
+eval $setvar
+case "$uselargefiles" in
+"$define")
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that a large files perl is to be built,
+: we may need to set or change some other defaults.
+ if $test -f uselargefiles.cbu; then
+ echo "Your platform has some specific hints for large file builds, using them..."
+ . ./uselargefiles.cbu
+ echo " "
+ echo "Rechecking to see how big your file offsets are..." >&4
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", (int)sizeof($lseektype));
+ return(0);
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ lseeksize=`./try`
+ $echo "Your file offsets are now $lseeksize bytes long."
+ else
+ dflt="$lseeksize"
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of your file offsets (in bytes)?"
+ . ./myread
+ lseeksize="$ans"
+ fi
+ case "$fpostype" in
+ *_t) zzz="$fpostype" ;;
+ *) zzz="fpos_t" ;;
+ esac
+ $echo $n "Rechecking the size of $zzz...$c" >&4
+ $cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ printf("%d\n", (int)sizeof($fpostype));
+ exit(0);
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ yyy=`./try`
+ dflt="$lseeksize"
+ case "$yyy" in
+ '') echo " "
+ echo "(I can't execute the test program--guessing $fpossize.)" >&4
+ ;;
+ *) fpossize=$yyy
+ echo " $fpossize bytes." >&4
+ ;;
+ esac
else
- echo "Nope, we'll have to live without it..."
+ dflt="$fpossize"
+ echo " "
+ echo "(I can't compile the test program. Guessing...)" >&4
+ rp="What is the size of your file positions (in bytes)?"
+ . ./myread
+ fpossize="$ans"
fi
- ;;
- esac
- case "$cpprun" in
- "$wrapper")
- cpprun=''
- cpplast=''
- ;;
- esac
+ $rm -f try.c try
+ fi
;;
esac
-case "$cppstdin" in
-"$wrapper"|'cppstdin') ;;
-*) $rm -f $wrapper;;
-esac
-$rm -f testcpp.c testcpp.out
-: Set private lib path
-case "$plibpth" in
-'') if ./mips; then
- plibpth="$incpath/usr/lib /usr/local/lib /usr/ccs/lib"
- fi;;
-esac
-case "$libpth" in
-' ') dlist='';;
-'') dlist="$loclibpth $plibpth $glibpth";;
-*) dlist="$libpth";;
+case "$usemorebits" in
+"$define"|true|[yY]*)
+ use64bitint="$define"
+ uselongdouble="$define"
+ usemorebits="$define"
+ ;;
+*) usemorebits="$undef"
+ ;;
esac
-: Now check and see which directories actually exist, avoiding duplicates
-libpth=''
-for xxx in $dlist
-do
- if $test -d $xxx; then
- case " $libpth " in
- *" $xxx "*) ;;
- *) libpth="$libpth $xxx";;
- esac
- fi
-done
-$cat <<'EOM'
-Some systems have incompatible or broken versions of libraries. Among
-the directories listed in the question below, please remove any you
-know not to be holding relevant libraries, and add any that are needed.
-Say "none" for none.
+case "$uselonglong" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+*** Configure -Duselonglong is deprecated, using -Duse64bitint instead.
EOM
-case "$libpth" in
-'') dflt='none';;
-*)
- set X $libpth
- shift
- dflt=${1+"$@"}
+ use64bitint="$define"
;;
-esac
-rp="Directories to use for library searches?"
-. ./myread
-case "$ans" in
-none) libpth=' ';;
-*) libpth="$ans";;
-esac
+esac
+case "$use64bits" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
-: compute shared library extension
-case "$so" in
-'')
- if xxx=`./loc libc.sl X $libpth`; $test -f "$xxx"; then
- dflt='sl'
- else
- dflt='so'
- fi
+*** Configure -Duse64bits is deprecated, using -Duse64bitint instead.
+EOM
+ use64bitint="$define"
;;
-*) dflt="$so";;
-esac
-$cat <<EOM
-
-On some systems, shared libraries may be available. Answer 'none' if
-you want to suppress searching of shared libraries for the remaining
-of this configuration.
+esac
+case "$use64bitints" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+*** There is no Configure -Duse64bitints, using -Duse64bitint instead.
EOM
-rp='What is the file extension used for shared libraries?'
-. ./myread
-so="$ans"
-
-: Define several unixisms.
-: Hints files or command line option can be used to override them.
-: The convoluted testing is in case hints files set either the old
-: or the new name.
-case "$_exe" in
-'') case "$exe_ext" in
- '') ;;
- *) _exe="$exe_ext" ;;
- esac
+ use64bitint="$define"
;;
-esac
-case "$_a" in
-'') case "$lib_ext" in
- '') _a='.a';;
- *) _a="$lib_ext" ;;
- esac
+esac
+case "$use64bitsint" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** There is no Configure -Duse64bitsint, using -Duse64bitint instead.
+EOM
+ use64bitint="$define"
;;
-esac
-case "$_o" in
-'') case "$obj_ext" in
- '') _o='.o';;
- *) _o="$obj_ext";;
- esac
+esac
+case "$uselonglongs" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** There is no Configure -Duselonglongs, using -Duse64bitint instead.
+EOM
+ use64bitint="$define"
;;
-esac
-case "$p_" in
-'') case "$path_sep" in
- '') p_=':';;
- *) p_="$path_sep";;
- esac
+esac
+case "$use64bitsall" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** There is no Configure -Duse64bitsall, using -Duse64bitall instead.
+EOM
+ use64bitall="$define"
;;
-esac
-exe_ext=$_exe
-lib_ext=$_a
-obj_ext=$_o
-path_sep=$p_
+esac
-: Which makefile gets called first. This is used by make depend.
-case "$firstmakefile" in
-'') firstmakefile='makefile';;
+case "$ccflags" in
+*-DUSE_LONG_LONG*|*-DUSE_64_BIT_INT*|*-DUSE_64_BIT_ALL*) use64bitint="$define";;
+esac
+case "$use64bitall" in
+"$define"|true|[yY]*) use64bitint="$define" ;;
esac
-cat <<EOM
-
-Perl can be built to use the SOCKS proxy protocol library. To do so,
-Configure must be run with -Dusesocks.
-
-Normally you do not need this and you should answer no.
+case "$longsize" in
+8) cat <<EOM
+You have natively 64-bit long integers.
EOM
-case "$usesocks" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-rp='Build Perl for SOCKS?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
-esac
-set usesocks
+ val="$define"
+ ;;
+*) case "$use64bitint" in
+ "$define"|true|[yY]*) dflt='y';;
+ *) dflt='n';;
+ esac
+ cat <<EOM
+
+Perl can be built to take advantage of 64-bit integer types
+on some systems. To do so, Configure can be run with -Duse64bitint.
+Choosing this option will most probably introduce binary incompatibilities.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+ rp='Try to use 64-bit integers, if available?'
+ . ./myread
+ case "$ans" in
+ [yY]*) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ ;;
+esac
+set use64bitint
eval $setvar
-: Looking for optional libraries
-echo " "
-echo "Checking for optional libraries..." >&4
-case "$libs" in
-' '|'') dflt='';;
-*) dflt="$libs";;
-esac
-case "$libswanted" in
-'') libswanted='c_s';;
-esac
-case "$usesocks" in
-$define)
- libswanted="$libswanted socks5 socks5_sh"
- ;;
-esac
-for thislib in $libswanted; do
-
- if xxx=`./loc lib$thislib.$so.[0-9]'*' X $libpth`;
- $test -f "$xxx" -a "X$ignore_versioned_solibs" = "X"; then
- echo "Found -l$thislib (shared)."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
- elif xxx=`./loc lib$thislib.$so X $libpth` ; $test -f "$xxx"; then
- echo "Found -l$thislib (shared)."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
- elif xxx=`./loc lib$thislib$_a X $libpth`; $test -f "$xxx"; then
- echo "Found -l$thislib."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
- elif xxx=`./loc $thislib$_a X $libpth`; $test -f "$xxx"; then
- echo "Found -l$thislib."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
- elif xxx=`./loc lib${thislib}_s$_a X $libpth`; $test -f "$xxx"; then
- echo "Found -l${thislib}_s."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l${thislib}_s";;
- esac
- elif xxx=`./loc Slib$thislib$_a X $xlibpth`; $test -f "$xxx"; then
- echo "Found -l$thislib."
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$thislib";;
- esac
- else
- echo "No -l$thislib."
- fi
-done
-set X $dflt
-shift
-dflt="$*"
-case "$libs" in
-'') dflt="$dflt";;
-*) dflt="$libs";;
-esac
-case "$dflt" in
-' '|'') dflt='none';;
-esac
+case "$use64bitall" in
+"$define"|true|[yY]*) dflt='y' ;;
+*) case "$longsize" in
+ 8) dflt='y' ;;
+ *) dflt='n' ;;
+ esac
+ ;;
+esac
+cat <<EOM
-$cat <<EOM
+You may also choose to try maximal 64-bitness. It means using as much
+64-bitness as possible on the platform. This in turn means even more
+binary incompatibilities. On the other hand, your platform may not
+have any more 64-bitness available than what you already have chosen.
-In order to compile $package on your machine, a number of libraries
-are usually needed. Include any other special libraries here as well.
-Say "none" for none. The default list is almost always right.
+If this doesn't make any sense to you, just accept the default '$dflt'.
EOM
-
-echo " "
-rp="What libraries to use?"
+rp='Try to use maximal 64-bit support, if available?'
. ./myread
case "$ans" in
-none) libs=' ';;
-*) libs="$ans";;
-esac
-
-: determine optimize, if desired, or use for debug flag also
-case "$optimize" in
-' '|$undef) dflt='none';;
-'') dflt='-O';;
-*) dflt="$optimize";;
-esac
-$cat <<EOH
-
-Some C compilers have problems with their optimizers. By default, $package
-compiles with the -O flag to use the optimizer. Alternately, you might want
-to use the symbolic debugger, which uses the -g flag (on traditional Unix
-systems). Either flag can be specified here. To use neither flag, specify
-the word "none".
-
-EOH
-rp="What optimizer/debugger flag should be used?"
-. ./myread
-optimize="$ans"
-case "$optimize" in
-'none') optimize=" ";;
+[yY]*) val="$define" ;;
+*) val="$undef" ;;
esac
+set use64bitall
+eval $setvar
+case "$use64bitall" in
+"$define")
+ case "$use64bitint" in
+ "$undef")
+ cat <<EOM
-dflt=''
-: We will not override a previous value, but we might want to
-: augment a hint file
-case "$hint" in
-none|recommended)
- case "$gccversion" in
- 1*) dflt='-fpcc-struct-return' ;;
- esac
- case "$optimize" in
- *-g*) dflt="$dflt -DDEBUGGING";;
- esac
- case "$gccversion" in
- 2*) if test -d /etc/conf/kconfig.d &&
- $contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- then
- dflt="$dflt -posix"
- fi
- ;;
+Since you have chosen a maximally 64-bit build, I'm also turning on
+the use of 64-bit integers.
+EOM
+ use64bitint="$define" ;;
esac
;;
esac
-case "$mips_type" in
-*BSD*|'') inclwanted="$locincpth $usrinc";;
-*) inclwanted="$locincpth $inclwanted $usrinc/bsd";;
+case "$use64bitint" in
+"$define"|true|[yY]*)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that a 64-bit perl is to be built,
+: we may need to set or change some other defaults.
+ if $test -f use64bitint.cbu; then
+ echo "Your platform has some specific hints for 64-bit integers, using them..."
+ . ./use64bitint.cbu
+ fi
+ case "$longsize" in
+ 4) case "$archname64" in
+ '') archname64=64int ;;
+ esac
+ ;;
+ esac
+ ;;
esac
-for thisincl in $inclwanted; do
- if $test -d $thisincl; then
- if $test x$thisincl != x$usrinc; then
- case "$dflt" in
- *$thisincl*);;
- *) dflt="$dflt -I$thisincl";;
- esac
- fi
+
+case "$use64bitall" in
+"$define"|true|[yY]*)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that a maximally 64-bit perl is to be built,
+: we may need to set or change some other defaults.
+ if $test -f use64bitall.cbu; then
+ echo "Your platform has some specific hints for 64-bit builds, using them..."
+ . ./use64bitall.cbu
fi
-done
+ case "$longsize" in
+ 4) case "$archname64" in
+ ''|64int) archname64=64all ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
-inctest='if $contains $2 $usrinc/$1 >/dev/null 2>&1; then
- xxx=true;
-elif $contains $2 $usrinc/sys/$1 >/dev/null 2>&1; then
- xxx=true;
+: determine the architecture name
+echo " "
+if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
+ tarch=`arch`"-$osname"
+elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
+ if uname -m > tmparch 2>&1 ; then
+ tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
+ -e 's/$/'"-$osname/" tmparch`
+ else
+ tarch="$osname"
+ fi
+ $rm -f tmparch
else
- xxx=false;
-fi;
-if $xxx; then
- case "$dflt" in
- *$2*);;
- *) dflt="$dflt -D$2";;
- esac;
-fi'
-
-set signal.h LANGUAGE_C; eval $inctest
-
-case "$usesocks" in
+ tarch="$osname"
+fi
+case "$myarchname" in
+''|"$tarch") ;;
+*)
+ echo "(Your architecture name used to be $myarchname.)"
+ archname=''
+ ;;
+esac
+myarchname="$tarch"
+case "$archname" in
+'') dflt="$tarch";;
+*) dflt="$archname";;
+esac
+rp='What is your architecture name'
+. ./myread
+archname="$ans"
+case "$usethreads" in
$define)
- ccflags="$ccflags -DSOCKS"
+ echo "Threads selected." >&4
+ case "$archname" in
+ *-thread*) echo "...and architecture name already has -thread." >&4
+ ;;
+ *) archname="$archname-thread"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
;;
esac
-
-case "$hint" in
-none|recommended) dflt="$ccflags $dflt" ;;
-*) dflt="$ccflags";;
+case "$usemultiplicity" in
+$define)
+ echo "Multiplicity selected." >&4
+ case "$archname" in
+ *-multi*) echo "...and architecture name already has -multi." >&4
+ ;;
+ *) archname="$archname-multi"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
esac
-
-case "$dflt" in
-''|' ') dflt=none;;
+case "$use64bitint" in
+$define)
+ case "$archname64" in
+ '')
+ ;;
+ *)
+ case "$archname" in
+ *-$archname64*) echo "...and architecture name already has $archname64." >&4
+ ;;
+ *) archname="$archname-$archname64"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+ esac
esac
-$cat <<EOH
-Your C compiler may want other flags. For this question you should include
--I/whatever and -DWHATEVER flags and any other flags used by the C compiler,
-but you should NOT include libraries or ld flags like -lwhatever. If you
-want $package to honor its debug switch, you should include -DDEBUGGING here.
-Your C compiler might also need additional flags, such as -D_POSIX_SOURCE.
+: determine root of directory hierarchy where package will be installed.
+case "$prefix" in
+'')
+ dflt=`./loc . /usr/local /usr/local /local /opt /usr`
+ ;;
+*)
+ dflt="$prefix"
+ ;;
+esac
+$cat <<EOM
-To use no flags, specify the word "none".
+By default, $package will be installed in $dflt/bin, manual pages
+under $dflt/man, etc..., i.e. with $dflt as prefix for all
+installation directories. Typically this is something like /usr/local.
+If you wish to have binaries under /usr/bin but other parts of the
+installation under /usr/local, that's ok: you will be prompted
+separately for each of the installation directories, the prefix being
+only used to set the defaults.
-EOH
-set X $dflt
-shift
-dflt=${1+"$@"}
-rp="Any additional cc flags?"
-. ./myread
-case "$ans" in
-none) ccflags='';;
-*) ccflags="$ans";;
+EOM
+fn=d~
+rp='Installation prefix to use?'
+. ./getfile
+oldprefix=''
+case "$prefix" in
+'') ;;
+*)
+ case "$ans" in
+ "$prefix") ;;
+ *) oldprefix="$prefix";;
+ esac
+ ;;
esac
+prefix="$ans"
+prefixexp="$ansexp"
-: the following weeds options from ccflags that are of no interest to cpp
-cppflags="$ccflags"
-case "$gccversion" in
-1*) cppflags="$cppflags -D__GNUC__"
-esac
-case "$mips_type" in
-'');;
-*BSD*) cppflags="$cppflags -DSYSTYPE_BSD43";;
+: is AFS running?
+echo " "
+case "$afs" in
+$define|true) afs=true ;;
+$undef|false) afs=false ;;
+*) if test -d /afs; then
+ afs=true
+ else
+ afs=false
+ fi
+ ;;
esac
-case "$cppflags" in
-'');;
-*)
- echo " "
- echo "Let me guess what the preprocessor flags are..." >&4
- set X $cppflags
- shift
- cppflags=''
- $cat >cpp.c <<'EOM'
-#define BLURFL foo
+if $afs; then
+ echo "AFS may be running... I'll be extra cautious then..." >&4
+else
+ echo "AFS does not seem to be running..." >&4
+fi
+
+: determine installation prefix for where package is to be installed.
+if $afs; then
+$cat <<EOM
+
+Since you are running AFS, I need to distinguish the directory in which
+files will reside from the directory in which they are installed (and from
+which they are presumably copied to the former directory by occult means).
-BLURFL xx LFRULB
EOM
- previous=''
- for flag in $*
- do
- case "$flag" in
- -*) ftry="$flag";;
- *) ftry="$previous $flag";;
- esac
- if $cppstdin -DLFRULB=bar $cppflags $ftry $cppminus <cpp.c \
- >cpp1.out 2>/dev/null && \
- $cpprun -DLFRULB=bar $cppflags $ftry $cpplast <cpp.c \
- >cpp2.out 2>/dev/null && \
- $contains 'foo.*xx.*bar' cpp1.out >/dev/null 2>&1 && \
- $contains 'foo.*xx.*bar' cpp2.out >/dev/null 2>&1
- then
- cppflags="$cppflags $ftry"
- previous=''
- else
- previous="$flag"
- fi
- done
- set X $cppflags
- shift
- cppflags=${1+"$@"}
- case "$cppflags" in
- *-*) echo "They appear to be: $cppflags";;
+ case "$installprefix" in
+ '') dflt=`echo $prefix | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installprefix";;
esac
- $rm -f cpp.c cpp?.out
+else
+$cat <<EOM
+
+In some special cases, particularly when building $package for distribution,
+it is convenient to distinguish between the directory in which files should
+be installed from the directory ($prefix) in which they
+will eventually reside. For most users, these two directories are the same.
+
+EOM
+ case "$installprefix" in
+ '') dflt=$prefix ;;
+ *) dflt=$installprefix;;
+ esac
+fi
+fn=d~
+rp='What installation prefix should I use for installing files?'
+. ./getfile
+installprefix="$ans"
+installprefixexp="$ansexp"
+
+: set the prefixit variable, to compute a suitable default value
+prefixit='case "$3" in
+""|none)
+ case "$oldprefix" in
+ "") eval "$1=\"\$$2\"";;
+ *)
+ case "$3" in
+ "") eval "$1=";;
+ none)
+ eval "tp=\"\$$2\"";
+ case "$tp" in
+ ""|" ") eval "$1=\"\$$2\"";;
+ *) eval "$1=";;
+ esac;;
+ esac;;
+ esac;;
+*)
+ eval "tp=\"$oldprefix-\$$2-\""; eval "tp=\"$tp\"";
+ case "$tp" in
+ --|/*--|\~*--) eval "$1=\"$prefix/$3\"";;
+ /*-$oldprefix/*|\~*-$oldprefix/*)
+ eval "$1=\`echo \$$2 | sed \"s,^$oldprefix,$prefix,\"\`";;
+ *) eval "$1=\"\$$2\"";;
+ esac;;
+esac'
+
+
+: get the patchlevel
+echo " "
+echo "Getting the current patchlevel..." >&4
+if $test -r $rsrc/patchlevel.h;then
+ revision=`awk '/define[ ]+PERL_REVISION/ {print $3}' $rsrc/patchlevel.h`
+ patchlevel=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
+ subversion=`awk '/define[ ]+PERL_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
+ api_revision=`awk '/define[ ]+PERL_API_REVISION/ {print $3}' $rsrc/patchlevel.h`
+ api_version=`awk '/define[ ]+PERL_API_VERSION/ {print $3}' $rsrc/patchlevel.h`
+ api_subversion=`awk '/define[ ]+PERL_API_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
+else
+ revision=0
+ patchlevel=0
+ subversion=0
+ api_revision=0
+ api_version=0
+ api_subversion=0
+fi
+$echo $n "(You have $package revision $revision" $c
+$echo $n " patchlevel $patchlevel" $c
+test 0 -eq "$subversion" || $echo $n " subversion $subversion" $c
+echo ".)"
+case "$osname" in
+dos|vms)
+ : XXX Should be a Configure test for double-dots in filenames.
+ version=`echo $revision $patchlevel $subversion | \
+ $awk '{ printf "%d_%d_%d\n", $1, $2, $3 }'`
+ api_versionstring=`echo $api_revision $api_version $api_subversion | \
+ $awk '{ printf "%d_%d_%d\n", $1, $2, $3 }'`
+ ;;
+*)
+ version=`echo $revision $patchlevel $subversion | \
+ $awk '{ printf "%d.%d.%d\n", $1, $2, $3 }'`
+ api_versionstring=`echo $api_revision $api_version $api_subversion | \
+ $awk '{ printf "%d.%d.%d\n", $1, $2, $3 }'`
;;
esac
+: Special case the 5.005_xx maintenance series, which used 5.005
+: without any subversion label as a subdirectory in $sitelib
+if test "${api_revision}${api_version}${api_subversion}" = "550"; then
+ api_versionstring='5.005'
+fi
-: flags used in final linking phase
-case "$ldflags" in
-'') if ./venix; then
- dflt='-i -z'
- else
- dflt=''
- fi
- case "$ccflags" in
- *-posix*) dflt="$dflt -posix" ;;
+: determine installation style
+: For now, try to deduce it from prefix unless it is already set.
+: Reproduce behavior of 5.005 and earlier, maybe drop that in 5.7.
+case "$installstyle" in
+'') case "$prefix" in
+ *perl*) dflt='lib';;
+ *) dflt='lib/perl5' ;;
esac
;;
-*) dflt="$ldflags";;
+*) dflt="$installstyle" ;;
esac
+: Probably not worth prompting for this since we prompt for all
+: the directories individually, and the prompt would be too long and
+: confusing anyway.
+installstyle=$dflt
-: Try to guess additional flags to pick up local libraries.
-for thislibdir in $libpth; do
- case " $loclibpth " in
- *" $thislibdir "*)
- case "$dflt " in
- *"-L$thislibdir "*) ;;
- *) dflt="$dflt -L$thislibdir" ;;
- esac
- ;;
- esac
-done
-
-case "$dflt" in
-'') dflt='none' ;;
+: determine where private library files go
+: Usual default is /usr/local/lib/perl5/$version.
+: Also allow things like /opt/perl/lib/$version, since
+: /opt/perl/lib/perl5... would be redundant.
+: The default "style" setting is made in installstyle.U
+case "$installstyle" in
+*lib/perl5*) set dflt privlib lib/$package/$version ;;
+*) set dflt privlib lib/$version ;;
esac
+eval $prefixit
+$cat <<EOM
-$cat <<EOH
-
-Your C linker may need flags. For this question you should
-include -L/whatever and any other flags used by the C linker, but you
-should NOT include libraries like -lwhatever.
+There are some auxiliary files for $package that need to be put into a
+private library directory that is accessible by everyone.
-Make sure you include the appropriate -L/path flags if your C linker
-does not normally search all of the directories you specified above,
-namely
- $libpth
-To use no flags, specify the word "none".
+EOM
+fn=d~+
+rp='Pathname where the private library files will reside?'
+. ./getfile
+privlib="$ans"
+privlibexp="$ansexp"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installprivlib=`echo $privlibexp | sed "s#^$prefix#$installprefix#"`
+else
+ installprivlib="$privlibexp"
+fi
-EOH
+: set the prefixup variable, to restore leading tilda escape
+prefixup='case "$prefixexp" in
+"$prefix") ;;
+*) eval "$1=\`echo \$$1 | sed \"s,^$prefixexp,$prefix,\"\`";;
+esac'
-rp="Any additional ld flags (NOT including libraries)?"
-. ./myread
-case "$ans" in
-none) ldflags='';;
-*) ldflags="$ans";;
+: determine where public architecture dependent libraries go
+set archlib archlib
+eval $prefixit
+: privlib default is /usr/local/lib/$package/$version
+: archlib default is /usr/local/lib/$package/$version/$archname
+: privlib may have an optional trailing /share.
+tdflt=`echo $privlib | $sed 's,/share$,,'`
+tdflt=$tdflt/$archname
+case "$archlib" in
+'') dflt=$tdflt
+ ;;
+*) dflt="$archlib"
+ ;;
esac
-rmlist="$rmlist pdp11"
+$cat <<EOM
-: coherency check
-echo " "
-echo "Checking your choice of C compiler and flags for coherency..." >&4
-$cat > try.c <<'EOF'
-#include <stdio.h>
-int main() { printf("Ok\n"); exit(0); }
-EOF
-set X $cc $optimize $ccflags -o try $ldflags try.c $libs
-shift
-$cat >try.msg <<'EOM'
-I've tried to compile and run the following simple program:
+$spackage contains architecture-dependent library files. If you are
+sharing libraries in a heterogeneous environment, you might store
+these files in a separate location. Otherwise, you can just include
+them with the rest of the public library files.
EOM
-$cat try.c >> try.msg
+fn=d+~
+rp='Where do you want to put the public architecture-dependent libraries?'
+. ./getfile
+archlib="$ans"
+archlibexp="$ansexp"
+if $test X"$archlib" = X"$privlib"; then
+ d_archlib="$undef"
+else
+ d_archlib="$define"
+fi
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installarchlib=`echo $archlibexp | sed "s#^$prefix#$installprefix#"`
+else
+ installarchlib="$archlibexp"
+fi
-$cat >> try.msg <<EOM
-I used the command:
+: Binary compatibility with 5.005 is not possible for builds
+: with advanced features
+case "$usethreads$usemultiplicity" in
+*define*)
+ bincompat5005="$undef"
+ d_bincompat5005="$undef"
+ ;;
+*) $cat <<EOM
- $*
- ./try
+This version of Perl can be compiled for binary compatibility with 5.005.
+If you decide to do so, you will be able to continue using most of the
+extensions that were compiled for Perl 5.005.
-and I got the following output:
+EOM
+ case "$bincompat5005$d_bincompat5005" in
+ *"$undef"*) dflt=n ;;
+ *) dflt=y ;;
+ esac
+ rp='Binary compatibility with Perl 5.005?'
+ . ./myread
+ case "$ans" in
+ y*) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ set d_bincompat5005
+ eval $setvar
+ case "$d_bincompat5005" in
+ "$define")
+ bincompat5005="$define"
+ ;;
+ *) bincompat5005="$undef"
+ d_bincompat5005="$undef"
+ ;;
+ esac
+ ;;
+esac
+
+
+: see if setuid scripts can be secure
+$cat <<EOM
+
+Some kernels have a bug that prevents setuid #! scripts from being
+secure. Some sites have disabled setuid #! scripts because of this.
+
+First let's decide if your kernel supports secure setuid #! scripts.
+(If setuid #! scripts would be secure but have been disabled anyway,
+don't say that they are secure if asked.)
EOM
-dflt=y
-if sh -c "$cc $optimize $ccflags -o try $ldflags try.c $libs" >>try.msg 2>&1; then
- if sh -c './try' >>try.msg 2>&1; then
- xxx=`./try`
- case "$xxx" in
- "Ok") dflt=n ;;
- *) echo 'The program compiled OK, but produced no output.' >> try.msg
- case " $libs " in
- *" -lsfio "*)
- cat >> try.msg <<'EOQS'
-If $libs contains -lsfio, and sfio is mis-configured, then it
-sometimes (apparently) runs and exits with a 0 status, but with no
-output! It may have to do with sfio's use of _exit vs. exit.
-EOQS
- rp="You have a big problem. Shall I abort Configure"
- dflt=y
- ;;
+val="$undef"
+if $test -d /dev/fd; then
+ echo "#!$ls" >reflect
+ chmod +x,u+s reflect
+ ./reflect >flect 2>&1
+ if $contains "/dev/fd" flect >/dev/null; then
+ echo "Congratulations, your kernel has secure setuid scripts!" >&4
+ val="$define"
+ else
+ $cat <<EOM
+If you are not sure if they are secure, I can check but I'll need a
+username and password different from the one you are using right now.
+If you don't have such a username or don't want me to test, simply
+enter 'none'.
+
+EOM
+ rp='Other username to test security of setuid scripts with?'
+ dflt='none'
+ . ./myread
+ case "$ans" in
+ n|none)
+ case "$d_suidsafe" in
+ '') echo "I'll assume setuid scripts are *not* secure." >&4
+ dflt=n;;
+ "$undef")
+ echo "Well, the $hint value is *not* secure." >&4
+ dflt=n;;
+ *) echo "Well, the $hint value *is* secure." >&4
+ dflt=y;;
esac
;;
+ *)
+ $rm -f reflect flect
+ echo "#!$ls" >reflect
+ chmod +x,u+s reflect
+ echo >flect
+ chmod a+w flect
+ echo '"su" will (probably) prompt you for '"$ans's password."
+ su $ans -c './reflect >flect'
+ if $contains "/dev/fd" flect >/dev/null; then
+ echo "Okay, it looks like setuid scripts are secure." >&4
+ dflt=y
+ else
+ echo "I don't think setuid scripts are secure." >&4
+ dflt=n
+ fi
+ ;;
+ esac
+ rp='Does your kernel have *secure* setuid scripts?'
+ . ./myread
+ case "$ans" in
+ [yY]*) val="$define";;
+ *) val="$undef";;
esac
- else
- echo "The program compiled OK, but exited with status $?." >>try.msg
- rp="You have a problem. Shall I abort Configure"
- dflt=y
fi
else
- echo "I can't compile the test program." >>try.msg
- rp="You have a BIG problem. Shall I abort Configure"
- dflt=y
+ echo "I don't think setuid scripts are secure (no /dev/fd directory)." >&4
+ echo "(That's for file descriptors, not floppy disks.)"
+ val="$undef"
fi
-case "$dflt" in
-y)
- $cat try.msg >&4
- case "$knowitall" in
- '')
- echo "(The supplied flags or libraries might be incorrect.)"
- ;;
- *) dflt=n;;
+set d_suidsafe
+eval $setvar
+
+$rm -f reflect flect
+
+: now see if they want to do setuid emulation
+echo " "
+val="$undef"
+case "$d_suidsafe" in
+"$define")
+ val="$undef"
+ echo "No need to emulate SUID scripts since they are secure here." >& 4
+ ;;
+*)
+ $cat <<EOM
+Some systems have disabled setuid scripts, especially systems where
+setuid scripts cannot be secure. On systems where setuid scripts have
+been disabled, the setuid/setgid bits on scripts are currently
+useless. It is possible for $package to detect those bits and emulate
+setuid/setgid in a secure fashion. This emulation will only work if
+setuid scripts have been disabled in your kernel.
+
+EOM
+ case "$d_dosuid" in
+ "$define") dflt=y ;;
+ *) dflt=n ;;
esac
- echo " "
+ rp="Do you want to do setuid/setgid emulation?"
. ./myread
case "$ans" in
- n*|N*) ;;
- *) echo "Ok. Stopping Configure." >&4
- exit 1
- ;;
+ [yY]*) val="$define";;
+ *) val="$undef";;
esac
;;
-n) echo "OK, that should do.";;
esac
-$rm -f try try.* core
+set d_dosuid
+eval $setvar
: determine filename position in cpp output
echo " "
esac
echo "Your system uses $freetype free(), it would seem." >&4
$rm -f malloc.[co]
+$cat <<EOM
+
+The installation process will also create a directory for
+vendor-supplied add-ons. Vendors who supply perl with their system
+may find it convenient to place all vendor-supplied files in this
+directory rather than in the main distribution directory. This will
+ease upgrades between binary-compatible maintenance versions of perl.
+
+Of course you may also use these directories in whatever way you see
+fit. For example, you might use them to access modules shared over a
+company-wide network.
+
+The default answer should be fine for most people.
+This causes further questions about vendor add-ons to be skipped
+and no vendor-specific directories will be configured for perl.
+
+EOM
+rp='Do you want to configure vendor-specific add-on directories?'
+case "$usevendorprefix" in
+define|true|[yY]*) dflt=y ;;
+*) : User may have set vendorprefix directly on Configure command line.
+ case "$vendorprefix" in
+ ''|' ') dflt=n ;;
+ *) dflt=y ;;
+ esac
+ ;;
+esac
+. ./myread
+case "$ans" in
+[yY]*) fn=d~+
+ rp='Installation prefix to use for vendor-supplied add-ons?'
+ case "$vendorprefix" in
+ '') dflt='' ;;
+ *) dflt=$vendorprefix ;;
+ esac
+ . ./getfile
+ : XXX Prefixit unit does not yet support siteprefix and vendorprefix
+ oldvendorprefix=''
+ case "$vendorprefix" in
+ '') ;;
+ *) case "$ans" in
+ "$prefix") ;;
+ *) oldvendorprefix="$prefix";;
+ esac
+ ;;
+ esac
+ usevendorprefix="$define"
+ vendorprefix="$ans"
+ vendorprefixexp="$ansexp"
+ ;;
+*) usevendorprefix="$undef"
+ vendorprefix=''
+ vendorprefixexp=''
+ ;;
+esac
+
+case "$vendorprefix" in
+'') d_vendorlib="$undef"
+ vendorlib=''
+ vendorlibexp=''
+ ;;
+*) d_vendorlib="$define"
+ : determine where vendor-supplied modules go.
+ : Usual default is /usr/local/lib/perl5/vendor_perl/$version
+ case "$vendorlib" in
+ '')
+ prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+ case "$installstyle" in
+ *lib/perl5*) dflt=$vendorprefix/lib/$package/vendor_$prog/$version ;;
+ *) dflt=$vendorprefix/lib/vendor_$prog/$version ;;
+ esac
+ ;;
+ *) dflt="$vendorlib"
+ ;;
+ esac
+ fn=d~+
+ rp='Pathname for the vendor-supplied library files?'
+ . ./getfile
+ vendorlib="$ans"
+ vendorlibexp="$ansexp"
+ ;;
+esac
+vendorlib_stem=`echo "$vendorlibexp" | sed "s,/$version$,,"`
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installvendorlib=`echo $vendorlibexp | $sed "s#^$prefix#$installprefix#"`
+else
+ installvendorlib="$vendorlibexp"
+fi
+
+case "$vendorprefix" in
+'') d_vendorarch="$undef"
+ vendorarch=''
+ vendorarchexp=''
+ ;;
+*) d_vendorarch="$define"
+ : determine where vendor-supplied architecture-dependent libraries go.
+ : vendorlib default is /usr/local/lib/perl5/vendor_perl/$version
+ : vendorarch default is /usr/local/lib/perl5/vendor_perl/$version/$archname
+ : vendorlib may have an optional trailing /share.
+ case "$vendorarch" in
+ '') dflt=`echo $vendorlib | $sed 's,/share$,,'`
+ dflt="$dflt/$archname"
+ ;;
+ *) dflt="$vendorarch" ;;
+ esac
+ fn=d~+
+ rp='Pathname for vendor-supplied architecture-dependent files?'
+ . ./getfile
+ vendorarch="$ans"
+ vendorarchexp="$ansexp"
+ ;;
+esac
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installvendorarch=`echo $vendorarchexp | sed "s#^$prefix#$installprefix#"`
+else
+ installvendorarch="$vendorarchexp"
+fi
+
: Cruising for prototypes
echo " "
echo "Checking out function prototypes..." >&4
fi
bin="$ans"
binexp="$ansexp"
-if $afs; then
- $cat <<EOM
+: Change installation prefix, if necessary.
+: XXX Bug? -- ignores Configure -Dinstallprefix setting.
+if $test X"$prefix" != X"$installprefix"; then
+ installbin=`echo $binexp | sed "s#^$prefix#$installprefix#"`
+else
+ installbin="$binexp"
+fi
-Since you are running AFS, I need to distinguish the directory in which
-executables reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
+: Find perl5.005 or later.
+echo "Looking for a previously installed perl5.005 or later... "
+case "$perl5" in
+'') for tdir in `echo "$binexp:$PATH" | $sed "s/$path_sep/ /g"`; do
+ : Check if this perl is recent and can load a simple module
+ if $test -x $tdir/perl && $tdir/perl -Mless -e 'use 5.005;' >/dev/null 2>&1; then
+ perl5=$tdir/perl
+ break;
+ elif $test -x $tdir/perl5 && $tdir/perl5 -Mless -e 'use 5.005;' >/dev/null 2>&1; then
+ perl5=$tdir/perl
+ break;
+ fi
+ done
+ ;;
+*) perl5="$perl5"
+ ;;
+esac
+case "$perl5" in
+'') echo "None found. That's ok.";;
+*) echo "Using $perl5." ;;
+esac
+
+$cat <<EOM
+
+After $package is installed, you may wish to install various
+add-on modules and utilities. Typically, these add-ons will
+be installed under $prefix with the rest
+of this package. However, you may wish to install such add-ons
+elsewhere under a different prefix.
+
+If you do not wish to put everything under a single prefix, that's
+ok. You will be prompted for the individual locations; this siteprefix
+is only used to suggest the defaults.
+
+The default should be fine for most people.
EOM
- case "$installbin" in
- '') dflt=`echo $binexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installbin";;
+fn=d~+
+rp='Installation prefix to use for add-on modules and utilities?'
+: XXX Here might be another good place for an installstyle setting.
+case "$siteprefix" in
+'') dflt=$prefix ;;
+*) dflt=$siteprefix ;;
+esac
+. ./getfile
+: XXX Prefixit unit does not yet support siteprefix and vendorprefix
+oldsiteprefix=''
+case "$siteprefix" in
+'') ;;
+*) case "$ans" in
+ "$prefix") ;;
+ *) oldsiteprefix="$prefix";;
esac
- fn=de~
- rp='Where will public executables be installed?'
- . ./getfile
- installbin="$ans"
+ ;;
+esac
+siteprefix="$ans"
+siteprefixexp="$ansexp"
+
+: determine where site specific libraries go.
+: Usual default is /usr/local/lib/perl5/site_perl/$version
+: The default "style" setting is made in installstyle.U
+: XXX No longer works with Prefixit stuff.
+prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+case "$sitelib" in
+'') case "$installstyle" in
+ *lib/perl5*) dflt=$siteprefix/lib/$package/site_$prog/$version ;;
+ *) dflt=$siteprefix/lib/site_$prog/$version ;;
+ esac
+ ;;
+*) dflt="$sitelib"
+ ;;
+esac
+$cat <<EOM
+
+The installation process will create a directory for
+site-specific extensions and modules. Most users find it convenient
+to place all site-specific files in this directory rather than in the
+main distribution directory.
+
+EOM
+fn=d~+
+rp='Pathname for the site-specific library files?'
+. ./getfile
+sitelib="$ans"
+sitelibexp="$ansexp"
+sitelib_stem=`echo "$sitelibexp" | sed "s,/$version$,,"`
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitelib=`echo $sitelibexp | $sed "s#^$prefix#$installprefix#"`
else
- installbin="$binexp"
+ installsitelib="$sitelibexp"
fi
+: Determine list of previous versions to include in @INC
+$cat > getverlist <<EOPL
+#!$perl5 -w
+use File::Basename;
+\$api_versionstring = "$api_versionstring";
+\$version = "$version";
+\$sitelib = "$sitelib";
+\$archname = "$archname";
+EOPL
+ $cat >> getverlist <<'EOPL'
+# Can't have leading @ because metaconfig interprets it as a command!
+;@inc_version_list=();
+$stem=dirname($sitelib);
+# XXX Redo to do opendir/readdir?
+if (-d $stem) {
+ chdir($stem);
+ ;@candidates = glob("5.*");
+}
+else {
+ ;@candidates = ();
+}
+
+# XXX ToDo: These comparisons must be reworked when two-digit
+# subversions come along, so that 5.7.10 compares as greater than
+# 5.7.3! By that time, hope that 5.6.x is sufficiently
+# widespread that we can use the built-in version vectors rather
+# than reinventing them here. For 5.6.0, however, we must
+# assume this script will likely be run by 5.005_0x. --AD 1/2000.
+foreach $d (@candidates) {
+ if ($d lt $version) {
+ if ($d ge $api_versionstring) {
+ unshift(@inc_version_list, "$d/$archname", $d);
+ }
+ elsif ($d ge "5.005") {
+ unshift(@inc_version_list, $d);
+ }
+ }
+ else {
+ # Skip newer version. I.e. don't look in
+ # 5.7.0 if we're installing 5.6.1.
+ }
+}
+
+if (@inc_version_list) {
+ print join(' ', @inc_version_list);
+}
+else {
+ # Blank space to preserve value for next Configure run.
+ print " ";
+}
+EOPL
+chmod +x getverlist
+case "$inc_version_list" in
+'') if test -x "$perl5"; then
+ dflt=`$perl5 getverlist`
+ else
+ dflt='none'
+ fi
+ ;;
+$undef) dflt='none' ;;
+*) dflt="$inc_version_list" ;;
+esac
+case "$dflt" in
+''|' ') dflt=none ;;
+esac
+$cat <<'EOM'
+
+In order to ease the process of upgrading, this version of perl
+can be configured to use modules built and installed with earlier
+versions of perl that were installed under $prefix. Specify here
+the list of earlier versions that this version of perl should check.
+If Configure detected no earlier versions of perl installed under
+$prefix, then the list will be empty. Answer 'none' to tell perl
+to not search earlier versions.
+
+The default should almost always be sensible, so if you're not sure,
+just accept the default.
+EOM
+
+rp='List of earlier versions to include in @INC?'
+. ./myread
+case "$ans" in
+[Nn]one|''|' ') inc_version_list=' ' ;;
+*) inc_version_list="$ans" ;;
+esac
+case "$inc_version_list" in
+''|' ')
+ inc_version_list_init='0';;
+*) inc_version_list_init=`echo $inc_version_list |
+ $sed -e 's/^/"/' -e 's/ /","/g' -e 's/$/",0/'`
+ ;;
+esac
+$rm -f getverlist
+
: determine whether to install perl also as /usr/bin/perl
echo " "
-if test -d /usr/bin -a "X$installbin" != X/usr/bin; then
+if $test -d /usr/bin -a "X$installbin" != X/usr/bin; then
$cat <<EOM
-Many scripts expect to perl to be installed as /usr/bin/perl.
+Many scripts expect perl to be installed as /usr/bin/perl.
I can install the perl you are about to compile also as /usr/bin/perl
(in addition to $installbin/perl).
EOM
set installusrbinperl
eval $setvar
-: define a shorthand compile call
-compile='
-mc_file=$1;
-shift;
-$cc $optimize $ccflags $ldflags -o ${mc_file} $* ${mc_file}.c $libs > /dev/null 2>&1;'
-: define a shorthand compile call for compilations that should be ok.
-compile_ok='
-mc_file=$1;
-shift;
-$cc $optimize $ccflags $ldflags -o ${mc_file} $* ${mc_file}.c $libs;'
-
echo " "
echo "Checking for GNU C Library..." >&4
cat >gnulibc.c <<EOM
tdir=`pwd`; cd $rsrc; $ls -C $dldir/dl*.xs; cd $tdir
rp="Source file to use for dynamic loading"
fn="fne"
- # XXX This getfile call will fail the existence check if you try
- # building away from $src (this is not supported yet).
+ gfpth="$src"
. ./getfile
usedl="$define"
: emulate basename
- dlsrc=`echo $ans | $sed -e 's@.*/\([^/]*\)$@\1@'`
+ dlsrc=`echo $ans | $sed -e 's%.*/\([^/]*\)$%\1%'`
$cat << EOM
case "$lddlflags" in
'') case "$osname" in
beos) dflt='-nostart' ;;
- hpux) dflt='-b' ;;
+ hpux) dflt='-b';
+ case "$gccversion" in
+ '') dflt="$dflt +vnocompatwarnings" ;;
+ esac
+ ;;
linux|irix*) dflt='-shared' ;;
next) dflt='none' ;;
solaris) dflt='-G' ;;
' ') dflt='none' ;;
*) dflt="$ccdlflags" ;;
esac
- rp="Any special flags to pass to $cc to use dynamic loading?"
+ rp="Any special flags to pass to $cc to use dynamic linking?"
. ./myread
case "$ans" in
none) ccdlflags=' ' ;;
;;
*) case "$useshrplib" in
'') case "$osname" in
- svr4*|dgux|dynixptx|esix|powerux|beos)
+ svr4*|dgux|dynixptx|esix|powerux|beos|cygwin*)
dflt=y
also='Building a shared libperl is required for dynamic loading to work on your system.'
;;
. ./myread
case "$ans" in
true|$define|[Yy]*)
- useshrplib='true'
- # Why does next4 have to be so different?
- case "${osname}${osvers}" in
- next4*|rhapsody*)
- xxx='DYLD_LIBRARY_PATH' ;;
- os2*) xxx='' ;; # Nothing special needed.
- beos*) xxx='' ;;
- *) xxx='LD_LIBRARY_PATH' ;;
- esac
- ;;
+ useshrplib='true' ;;
*) useshrplib='false' ;;
esac
;;
linux*) # ld won't link with a bare -lperl otherwise.
dflt=libperl.$so
;;
+ cygwin*) # include version
+ dflt=`echo libperl$version | sed -e 's/\./_/g'`$lib_ext
+ ;;
*) # Try to guess based on whether libc has major.minor.
case "$libc" in
*libc.$so.[0-9]*.[0-9]*) dflt=$majmin ;;
;;
esac
fi
+# Fix ccdlflags in AIX for building external extensions.
+# (For building Perl itself bare -bE:perl.exp is needed,
+# Makefile.SH takes care of this.)
case "$osname" in
-aix*) ccdlflags="$ccdlflags -bE:$installarchlib/CORE/perl.exp" ;;
+aix) ccdlflags="$ccdlflags -bE:$installarchlib/CORE/perl.exp" ;;
esac
# Respect a hint or command-line value.
case "$shrpenv" in
'') shrpenv="$tmp_shrpenv" ;;
esac
+case "$ldlibpthname" in
+'') ldlibpthname=LD_LIBRARY_PATH ;;
+none) ldlibpthname='' ;;
+esac
: determine where manual pages go
set man1dir man1dir none
man1dir="$ans"
man1direxp="$ansexp"
case "$man1dir" in
-'') man1dir=' '
+'') man1dir=' '
installman1dir='';;
esac
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-manual pages reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-EOM
- case "$installman1dir" in
- '') dflt=`echo $man1direxp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installman1dir";;
- esac
- fn=de~
- rp='Where will man pages be installed?'
- . ./getfile
- installman1dir="$ans"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installman1dir=`echo $man1direxp | $sed "s#^$prefix#$installprefix#"`
else
installman1dir="$man1direxp"
fi
: see if we can have long filenames
echo " "
-rmlist="$rmlist /tmp/cf$$"
-$test -d /tmp/cf$$ || mkdir /tmp/cf$$
first=123456789abcdef
-second=/tmp/cf$$/$first
-$rm -f $first $second
+$rm -f $first
if (echo hi >$first) 2>/dev/null; then
if $test -f 123456789abcde; then
echo 'You cannot have filenames longer than 14 characters. Sigh.' >&4
val="$undef"
else
- if (echo hi >$second) 2>/dev/null; then
- if $test -f /tmp/cf$$/123456789abcde; then
- $cat <<'EOM'
-That's peculiar... You can have filenames longer than 14 characters, but only
-on some of the filesystems. Maybe you are using NFS. Anyway, to avoid problems
-I shall consider your system cannot support long filenames at all.
-EOM
- val="$undef"
- else
- echo 'You can have filenames longer than 14 characters.' >&4
- val="$define"
- fi
- else
- $cat <<'EOM'
-How confusing! Some of your filesystems are sane enough to allow filenames
-longer than 14 characters but some others like /tmp can't even think about them.
-So, for now on, I shall assume your kernel does not allow them at all.
-EOM
- val="$undef"
- fi
+ echo 'You can have filenames longer than 14 characters.'>&4
+ val="$define"
fi
else
$cat <<'EOM'
-You can't have filenames longer than 14 chars. You can't even think about them!
+You can't have filenames longer than 14 chars.
+You can't even think about them!
EOM
val="$undef"
fi
set d_flexfnam
eval $setvar
-$rm -rf /tmp/cf$$ 123456789abcde*
+$rm -rf 123456789abcde*
: determine where library module manual pages go
set man3dir man3dir none
echo "If you don't want the manual sources installed, answer 'none'."
prog=`echo $package | $sed 's/-*[0-9.]*$//'`
case "$man3dir" in
-'') case "$prefix" in
- *$prog*) dflt=`echo $man1dir |
- $sed -e 's/man1/man3/g' -e 's/man\.1/man\.3/g'` ;;
- *) dflt="$privlib/man/man3" ;;
- esac
+'') dflt=`echo "$man1dir" | $sed -e 's/man1/man3/g' -e 's/man\.1/man\.3/g'`
+ if $test -d "$privlib/man/man3"; then
+ cat <<EOM >&4
+
+WARNING: Previous versions of perl installed man3 pages into
+$privlib/man/man3. This version will suggest a
+new default of $dflt.
+EOM
+ tdflt=$dflt
+ dflt='n'
+ rp='Do you wish to preserve the old behavior?(y/n)'
+ . ./myread
+ case "$ans" in
+ y*) dflt="$privlib/man/man3" ;;
+ *) dflt=$tdflt ;;
+ esac
+ fi
;;
-' ') dflt=none;;
*) dflt="$man3dir" ;;
esac
+case "$dflt" in
+' ') dflt=none ;;
+esac
echo " "
-
fn=dn+~
rp="Where do the $package library man pages (source) go?"
. ./getfile
-if test "X$man3direxp" != "X$ansexp"; then
- installman3dir=''
-fi
-
man3dir="$ans"
man3direxp="$ansexp"
case "$man3dir" in
-'') man3dir=' '
+'') man3dir=' '
installman3dir='';;
esac
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-manual pages reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-EOM
- case "$installman3dir" in
- '') dflt=`echo $man3direxp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installman3dir";;
- esac
- fn=de~
- rp='Where will man pages be installed?'
- . ./getfile
- installman3dir="$ans"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installman3dir=`echo $man3direxp | $sed "s#^$prefix#$installprefix#"`
else
installman3dir="$man3direxp"
fi
: What suffix to use on installed man pages
-
case "$man3dir" in
' ')
man3ext='0'
esac
fi
case "$hostcat" in
-'') hostcat='cat /etc/hosts';;
+'') test -f /etc/hosts && hostcat='cat /etc/hosts';;
esac
case "$groupcat" in
-'') groupcat='cat /etc/group';;
+'') test -f /etc/group && groupcat='cat /etc/group';;
esac
case "$passcat" in
-'') passcat='cat /etc/passwd';;
+'') test -f /etc/passwd && passcat='cat /etc/passwd';;
esac
: now get the host name
$sed -e 's/[ ]*#.*//; s/$/ /' > hosts && \
$test -s hosts
} || {
+ test "X$hostcat" != "X" &&
$hostcat | $sed -n -e "s/[ ]*#.*//; s/\$/ /
/[ ]$myhostname[ . ]/p" > hosts
}
I need to get your e-mail address in Internet format if possible, i.e.
something like user@host.domain. Please answer accurately since I have
no easy means to double check it. The default value provided below
-is most probably close to the reality but may not be valid from outside
+is most probably close to reality but may not be valid from outside
your organization...
EOM
dflt="$bin"
: guess some guesses
$test -d /usr/share/scripts && dflt=/usr/share/scripts
- $test -d /usr/share/bin && dflt=/usr/share/bin
- $test -d /usr/local/script && dflt=/usr/local/script
- $test -d $prefixexp/script && dflt=$prefixexp/script
+ $test -d /usr/share/bin && dflt=/usr/share/bin
+ $test -d /usr/local/script && dflt=/usr/local/script
+ $test -d /usr/local/scripts && dflt=/usr/local/scripts
+ $test -d $prefixexp/script && dflt=$prefixexp/script
set dflt
eval $prefixup
;;
fi
scriptdir="$ans"
scriptdirexp="$ansexp"
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-scripts reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-
-EOM
- case "$installscript" in
- '') dflt=`echo $scriptdirexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installscript";;
- esac
- fn=de~
- rp='Where will public scripts be installed?'
- . ./getfile
- installscript="$ans"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installscript=`echo $scriptdirexp | sed "s#^$prefix#$installprefix#"`
else
installscript="$scriptdirexp"
fi
-: determine where site specific libraries go.
-: Usual default is /usr/local/lib/perl5/site_perl/$apiversion
-prog=`echo $package | $sed 's/-*[0-9.]*$//'`
-case "$prefix" in
-*perl*) set dflt sitelib lib/site_$prog/$apiversion ;;
-*) set dflt sitelib lib/$package/site_$prog/$apiversion ;;
+: determine where site specific architecture-dependent libraries go.
+: sitelib default is /usr/local/lib/perl5/site_perl/$version
+: sitearch default is /usr/local/lib/perl5/site_perl/$version/$archname
+: sitelib may have an optional trailing /share.
+case "$sitearch" in
+'') dflt=`echo $sitelib | $sed 's,/share$,,'`
+ dflt="$dflt/$archname"
+ ;;
+*) dflt="$sitearch"
+ ;;
esac
+set sitearch sitearch none
eval $prefixit
$cat <<EOM
The installation process will also create a directory for
-site-specific extensions and modules. Some users find it convenient
-to place all site-specific files in this directory rather than in the
-main distribution directory.
+architecture-dependent site-specific extensions and modules.
EOM
fn=d~+
-rp='Pathname for the site-specific library files?'
+rp='Pathname for the site-specific architecture-dependent library files?'
. ./getfile
-if $test "X$sitelibexp" != "X$ansexp"; then
- installsitelib=''
+sitearch="$ans"
+sitearchexp="$ansexp"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitearch=`echo $sitearchexp | sed "s#^$prefix#$installprefix#"`
+else
+ installsitearch="$sitearchexp"
fi
-sitelib="$ans"
-sitelibexp="$ansexp"
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in
-which site-specific files reside from the directory in which they are
-installed (and from which they are presumably copied to the former
-directory by occult means).
-EOM
- case "$installsitelib" in
- '') dflt=`echo $sitelibexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installsitelib";;
- esac
- fn=de~
- rp='Where will site-specific files be installed?'
- . ./getfile
- installsitelib="$ans"
+: determine where add-on public executables go
+case "$sitebin" in
+'') dflt=$siteprefix/bin ;;
+*) dflt=$sitebin ;;
+esac
+fn=d~
+rp='Pathname where the add-on public executables should be installed?'
+. ./getfile
+sitebin="$ans"
+sitebinexp="$ansexp"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitebin=`echo $sitebinexp | sed "s#^$prefix#$installprefix#"`
else
- installsitelib="$sitelibexp"
+ installsitebin="$sitebinexp"
fi
-: determine where site specific architecture-dependent libraries go.
-: sitelib default is /usr/local/lib/perl5/site_perl/$apiversion
-: sitearch default is /usr/local/lib/perl5/site_perl/$apiversion/$archname
-: sitelib may have an optional trailing /share.
-tdflt=`echo $sitelib | $sed 's,/share$,,'`
-tdflt="$tdflt/$archname"
-set sitearch sitearch none
-eval $prefixit
-case "$sitearch" in
-'') dflt="$tdflt" ;;
-*) dflt="$sitearch" ;;
+: see if sqrtl exists
+set sqrtl d_sqrtl
+eval $inlibc
+
+case "$ccflags" in
+*-DUSE_LONG_DOUBLE*|*-DUSE_MORE_BITS*) uselongdouble="$define" ;;
esac
-$cat <<EOM
-The installation process will also create a directory for
-architecture-dependent site-specific extensions and modules.
+case "$uselongdouble" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+cat <<EOM
+
+Perl can be built to take advantage of long doubles which
+(if available) may give more accuracy and range for floating point numbers.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Try to use long doubles if available?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set uselongdouble
+eval $setvar
+
+case "$uselongdouble" in
+true|[yY]*) uselongdouble="$define" ;;
+esac
+case "$uselongdouble" in
+$define)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that long doubles should be used,
+: we may need to set or change some other defaults.
+ if $test -f uselongdouble.cbu; then
+ echo "Your platform has some specific hints for long doubles, using them..."
+ . ./uselongdouble.cbu
+ else
+ $cat <<EOM
+(Your platform doesn't have any specific hints for long doubles.)
EOM
-fn=nd~+
-rp='Pathname for the site-specific architecture-dependent library files?'
-. ./getfile
-if $test "X$sitearchexp" != "X$ansexp"; then
- installsitearch=''
-fi
-sitearch="$ans"
-sitearchexp="$ansexp"
-if $afs; then
- $cat <<EOM
+ fi
+ ;;
+esac
-Since you are running AFS, I need to distinguish the directory in
-which site-specific architecture-dependent library files reside from
-the directory in which they are installed (and from which they are
-presumably copied to the former directory by occult means).
+case "$uselongdouble:$d_sqrtl" in
+$define:$undef)
+ $cat <<EOM >&4
+
+*** You requested the use of long doubles but you do not seem to have
+*** the mathematic functions for long doubles. I'm disabling the use
+*** of long doubles.
EOM
- case "$installsitearch" in
- '') dflt=`echo $sitearchexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installsitearch";;
- esac
- fn=de~
- rp='Where will site-specific architecture-dependent files be installed?'
- . ./getfile
- installsitearch="$ans"
-else
- installsitearch="$sitearchexp"
-fi
+ uselongdouble=$undef
+ ;;
+esac
+case "$useperlio" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
cat <<EOM
Previous version of $package used the standard IO mechanisms as defined
problems with some extension modules. Using PerlIO with stdio is safe,
but it is slower than plain stdio and therefore is not the default.
-If this doesn't make any sense to you, just accept the default 'n'.
+If this doesn't make any sense to you, just accept the default '$dflt'.
EOM
-case "$useperlio" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
rp='Use the experimental PerlIO abstraction layer?'
. ./myread
case "$ans" in
set useperlio
eval $setvar
+case "$vendorprefix" in
+'') d_vendorbin="$undef"
+ vendorbin=''
+ vendorbinexp=''
+ ;;
+*) d_vendorbin="$define"
+ : determine where vendor-supplied executables go.
+ case "$vendorbin" in
+ '') dflt=$vendorprefix/bin ;;
+ *) dflt="$vendorbin" ;;
+ esac
+ fn=d~+
+ rp='Pathname for the vendor-supplied executables directory?'
+ . ./getfile
+ vendorbin="$ans"
+ vendorbinexp="$ansexp"
+ ;;
+esac
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installvendorbin=`echo $vendorbinexp | $sed "s#^$prefix#$installprefix#"`
+else
+ installvendorbin="$vendorbinexp"
+fi
+
+: see if qgcvt exists
+set qgcvt d_qgcvt
+eval $inlibc
+
+: check for length of double
+echo " "
+case "$doublesize" in
+'')
+ echo "Checking to see how big your double precision numbers are..." >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", (int)sizeof(double));
+ exit(0);
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ doublesize=`./try`
+ echo "Your double is $doublesize bytes long."
+ else
+ dflt='8'
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of a double precision number (in bytes)?"
+ . ./myread
+ doublesize="$ans"
+ fi
+ ;;
+esac
+$rm -f try.c try
+
+: check for long doubles
+echo " "
+echo "Checking to see if you have long double..." >&4
+echo 'int main() { long double x = 7.0; }' > try.c
+set try
+if eval $compile; then
+ val="$define"
+ echo "You have long double."
+else
+ val="$undef"
+ echo "You do not have long double."
+fi
+$rm try.*
+set d_longdbl
+eval $setvar
+
+: check for length of long double
+case "${d_longdbl}${longdblsize}" in
+$define)
+ echo " "
+ echo "Checking to see how big your long doubles are..." >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", sizeof(long double));
+}
+EOCP
+ set try
+ set try
+ if eval $compile; then
+ longdblsize=`./try$exe_ext`
+ echo "Your long doubles are $longdblsize bytes long."
+ else
+ dflt='8'
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)" >&4
+ rp="What is the size of a long double (in bytes)?"
+ . ./myread
+ longdblsize="$ans"
+ fi
+ if $test "X$doublesize" = "X$longdblsize"; then
+ echo "(That isn't any different from an ordinary double.)"
+ fi
+ ;;
+esac
+$rm -f try.* try
+
+echo " "
+
+if $test X"$d_longdbl" = X"$define"; then
+
+echo "Checking how to print long doubles..." >&4
+
+if $test X"$sPRIfldbl" = X -a X"$doublesize" = X"$longdblsize"; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ double d = 123.456;
+ printf("%.3f\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"f"'; sPRIgldbl='"g"'; sPRIeldbl='"e"';
+ sPRIFldbl='"F"'; sPRIGldbl='"G"'; sPRIEldbl='"E"';
+ echo "We will use %f."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRIfldbl" = X; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long double d = 123.456;
+ printf("%.3llf\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"llf"'; sPRIgldbl='"llg"'; sPRIeldbl='"lle"';
+ sPRIFldbl='"llF"'; sPRIGldbl='"llG"'; sPRIEldbl='"llE"';
+ echo "We will use %llf."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRIfldbl" = X; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long double d = 123.456;
+ printf("%.3Lf\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"Lf"'; sPRIgldbl='"Lg"'; sPRIeldbl='"Le"';
+ sPRIFldbl='"LF"'; sPRIGldbl='"LG"'; sPRIEldbl='"LE"';
+ echo "We will use %Lf."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRIfldbl" = X; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long double d = 123.456;
+ printf("%.3lf\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"lf"'; sPRIgldbl='"lg"'; sPRIeldbl='"le"';
+ sPRIFldbl='"lF"'; sPRIGldbl='"lG"'; sPRIEldbl='"lE"';
+ echo "We will use %lf."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRIfldbl" = X; then
+ echo "Cannot figure out how to print long doubles." >&4
+fi
+
+$rm -f try try.*
+
+fi # d_longdbl
+
+case "$sPRIfldbl" in
+'') d_PRIfldbl="$undef"; d_PRIgldbl="$undef"; d_PRIeldbl="$undef";
+ d_PRIFldbl="$undef"; d_PRIGldbl="$undef"; d_PRIEldbl="$undef";
+ ;;
+*) d_PRIfldbl="$define"; d_PRIgldbl="$define"; d_PRIeldbl="$define";
+ d_PRIFldbl="$define"; d_PRIGldbl="$define"; d_PRIEldbl="$define";
+ ;;
+esac
+
: Check how to convert floats to strings.
if test "X$d_Gconvert" = X; then
echo " "
echo "Checking for an efficient way to convert floats to strings."
- $cat >try.c <<'EOP'
+ echo " " > try.c
+ case "$uselongdouble" in
+ "$define") echo "#define USE_LONG_DOUBLE" >>try.c ;;
+ esac
+ case "$d_longdbl" in
+ "$define") echo "#define HAS_LONG_DOUBLE" >>try.c ;;
+ esac
+ case "$d_PRIgldbl" in
+ "$define") echo "#define HAS_PRIgldbl" >>try.c ;;
+ esac
+ $cat >>try.c <<EOP
#ifdef TRY_gconvert
#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
char *myname = "gconvert";
#define Gconvert(x,n,t,b) gcvt((x),(n),(b))
char *myname = "gcvt";
#endif
+#ifdef TRY_qgcvt
+#define Gconvert(x,n,t,b) qgcvt((x),(n),(b))
+char *myname = "qgcvt";
+#define DOUBLETYPE long double
+#endif
#ifdef TRY_sprintf
+#if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE) && defined(HAS_PRIgldbl)
+#define Gconvert(x,n,t,b) sprintf((b),"%.*"$sPRIgldbl,(n),(x))
+#else
#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
+#endif
char *myname = "sprintf";
#endif
+#ifndef DOUBLETYPE
+#if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE)
+#define DOUBLETYPE long double
+#else
+#define DOUBLETYPE double
+#endif
+#endif
+
#include <stdio.h>
+#define I_STDLIB $i_stdlib
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+
int
checkit(expect, got)
char *expect;
/* This must be 1st test on (which?) platform */
/* Alan Burlison <AlanBurlsin@unn.unisys.com> */
- Gconvert(0.1, 8, 0, buf);
+ Gconvert((DOUBLETYPE)0.1, 8, 0, buf);
checkit("0.1", buf);
- Gconvert(1.0, 8, 0, buf);
+ Gconvert((DOUBLETYPE)1.0, 8, 0, buf);
checkit("1", buf);
- Gconvert(0.0, 8, 0, buf);
+ Gconvert((DOUBLETYPE)1.1, 8, 0, buf);
+ checkit("1.1", buf);
+
+ Gconvert((DOUBLETYPE)1.01, 8, 0, buf);
+ checkit("1.01", buf);
+
+ Gconvert((DOUBLETYPE)1.001, 8, 0, buf);
+ checkit("1.001", buf);
+
+ Gconvert((DOUBLETYPE)1.0001, 8, 0, buf);
+ checkit("1.0001", buf);
+
+ Gconvert((DOUBLETYPE)1.00001, 8, 0, buf);
+ checkit("1.00001", buf);
+
+ Gconvert((DOUBLETYPE)1.000001, 8, 0, buf);
+ checkit("1.000001", buf);
+
+ Gconvert((DOUBLETYPE)0.0, 8, 0, buf);
checkit("0", buf);
- Gconvert(-1.0, 8, 0, buf);
+ Gconvert((DOUBLETYPE)-1.0, 8, 0, buf);
checkit("-1", buf);
/* Some Linux gcvt's give 1.e+5 here. */
- Gconvert(100000.0, 8, 0, buf);
+ Gconvert((DOUBLETYPE)100000.0, 8, 0, buf);
checkit("100000", buf);
/* Some Linux gcvt's give -1.e+5 here. */
- Gconvert(-100000.0, 8, 0, buf);
+ Gconvert((DOUBLETYPE)-100000.0, 8, 0, buf);
checkit("-100000", buf);
exit(0);
*) xxx_list='gconvert gcvt sprintf' ;;
esac
+ case "$d_longdbl$uselongdouble$d_qgcvt" in
+ "$define$define$define") xxx_list="`echo $xxx_list|sed 's/gcvt/qgcvt gcvt/'`" ;;
+ esac
+
for xxx_convert in $xxx_list; do
- echo "Trying $xxx_convert"
+ echo "Trying $xxx_convert..."
$rm -f try try$_o
set try -DTRY_$xxx_convert
if eval $compile; then
- echo "$xxx_convert" found. >&4
+ echo "$xxx_convert() found." >&4
if ./try; then
echo "I'll use $xxx_convert to convert floats into a string." >&4
break;
case "$xxx_convert" in
gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
- *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
+ qgcvt) d_Gconvert='qgcvt((x),(n),(b))' ;;
+ *) case "$uselongdouble$d_longdbl$d_PRIgldbl" in
+ "$define$define$define")
+ d_Gconvert="sprintf((b),\"%.*$sPRIgldbl\",(n),(x))" ;;
+ *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
+ esac
+ ;;
esac
fi
set alarm d_alarm
eval $inlibc
+: see if atolf exists
+set atolf d_atolf
+eval $inlibc
+
+: see if atoll exists
+set atoll d_atoll
+eval $inlibc
+
: Look for GNU-cc style attribute checking
echo " "
echo "Checking whether your compiler can handle __attribute__ ..." >&4
$undef)
xxx="a BSD one, i.e. you use setpgrp(pid,pgrp)."
val="$define"
- ;;
- $define)
- xxx="probably a USG one, i.e. you use setpgrp()."
- val="$undef"
- ;;
- esac
- fi
- echo "Assuming your setpgrp is $xxx" >&4
- fi
- ;;
-*) val="$undef";;
-esac
-set d_bsdsetpgrp
-eval $setvar
-$rm -f set set.c
-: see if bzero exists
-set bzero d_bzero
-eval $inlibc
-
-: check for lengths of integral types
-echo " "
-case "$intsize" in
-'')
- echo "Checking to see how big your integers are..." >&4
- $cat >intsize.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("intsize=%d;\n", sizeof(int));
- printf("longsize=%d;\n", sizeof(long));
- printf("shortsize=%d;\n", sizeof(short));
- exit(0);
-}
-EOCP
- set intsize
- if eval $compile_ok && ./intsize > /dev/null; then
- eval `./intsize`
- echo "Your integers are $intsize bytes long."
- echo "Your long integers are $longsize bytes long."
- echo "Your short integers are $shortsize bytes long."
- else
- $cat >&4 <<EOM
-!
-Help! I can't compile and run the intsize test program: please enlighten me!
-(This is probably a misconfiguration in your system or libraries, and
-you really ought to fix it. Still, I'll try anyway.)
-!
-EOM
- dflt=4
- rp="What is the size of an integer (in bytes)?"
- . ./myread
- intsize="$ans"
- dflt=$intsize
- rp="What is the size of a long integer (in bytes)?"
- . ./myread
- longsize="$ans"
- dflt=2
- rp="What is the size of a short integer (in bytes)?"
- . ./myread
- shortsize="$ans"
+ ;;
+ $define)
+ xxx="probably a USG one, i.e. you use setpgrp()."
+ val="$undef"
+ ;;
+ esac
+ fi
+ echo "Assuming your setpgrp is $xxx" >&4
fi
;;
+*) val="$undef";;
esac
-$rm -f intsize intsize.*
+set d_bsdsetpgrp
+eval $setvar
+$rm -f set set.c
+: see if bzero exists
+set bzero d_bzero
+eval $inlibc
: see if signal is declared as pointer to function returning int or void
echo " "
set chsize d_chsize
eval $inlibc
-hasfield='varname=$1; struct=$2; field=$3; shift; shift; shift;
-while $test $# -ge 2; do
- case "$1" in
- $define) echo "#include <$2>";;
- esac ;
- shift 2;
-done > try.c;
-echo "int main () { struct $struct foo; foo.$field = 0; }" >> try.c;
-if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define";
-else
- val="$undef";
-fi;
-set $varname;
-eval $setvar;
-$rm -f try.c try.o'
-
-: see if this is a sys/uio.h system
-set sys/uio.h i_sysuio
-eval $inhdr
-
-echo "Checking to see if your system supports struct iovec..." >&4
-set d_iovec_s iovec iov_base $i_sysuio sys/uio.h
-eval $hasfield
-case "$d_iovec_s" in
-"$define") echo "Yup, it does." >&4
- ;;
-*) echo "Nope, it doesn't." >&4
- ;;
-esac
-
-socketlib=''
-sockethdr=''
-: see whether socket exists
-echo " "
-$echo $n "Hmm... $c" >&4
-if set socket val -f d_socket; eval $csym; $val; then
- echo "Looks like you have Berkeley networking support." >&4
- d_socket="$define"
- if set setsockopt val -f; eval $csym; $val; then
- d_oldsock="$undef"
- else
- echo "...but it uses the old BSD 4.1c interface, rather than 4.2." >&4
- d_oldsock="$define"
- fi
-else
- if $contains socklib libc.list >/dev/null 2>&1; then
- echo "Looks like you have Berkeley networking support." >&4
- d_socket="$define"
- : we will have to assume that it supports the 4.2 BSD interface
- d_oldsock="$undef"
- else
- echo "You don't have Berkeley networking in libc$_a..." >&4
- if test "X$d_socket" = "X$define"; then
- echo "...but you seem to believe that you have sockets." >&4
- else
- for net in net socket
- do
- if test -f /usr/lib/lib$net$_a; then
- ( ($nm $nm_opt /usr/lib/lib$net$_a | eval $nm_extract) || \
- $ar t /usr/lib/lib$net$_a) 2>/dev/null >> libc.list
- if $contains socket libc.list >/dev/null 2>&1; then
- d_socket="$define"
- socketlib="-l$net"
- case "$net" in
- net)
- echo "...but the Wollongong group seems to have hacked it in." >&4
- sockethdr="-I/usr/netinclude"
- ;;
- esac
- echo "Found Berkeley sockets interface in lib$net." >& 4
- if $contains setsockopt libc.list >/dev/null 2>&1; then
- d_oldsock="$undef"
- else
- echo "...using the old BSD 4.1c interface, rather than 4.2." >&4
- d_oldsock="$define"
- fi
- break
- fi
- fi
- done
- if test "X$d_socket" != "X$define"; then
- echo "or anywhere else I see." >&4
- d_socket="$undef"
- d_oldsock="$undef"
- fi
- fi
- fi
-fi
-
-: see if socketpair exists
-set socketpair d_sockpair
-eval $inlibc
-
-
-echo " "
-echo "Checking the availability of certain socket constants..." >& 4
-for ENUM in MSG_CTRUNC MSG_DONTROUTE MSG_OOB MSG_PEEK MSG_PROXY SCM_RIGHTS; do
- enum=`$echo $ENUM|./tr '[A-Z]' '[a-z]'`
- $cat >try.c <<EOF
-#include <sys/types.h>
-#include <sys/socket.h>
-int main() {
- int i = $ENUM;
-}
-EOF
- val="$undef"
- set try; if eval $compile; then
- val="$define"
- fi
- set d_${enum}; eval $setvar
- $rm -f try.c try
-done
-
-set sendmsg d_sendmsg
-eval $inlibc
-
-set recvmsg d_recvmsg
-eval $inlibc
-
-echo " "
-$echo $n "Checking to see if your system supports struct msghdr...$c" >&4
-set d_msghdr_s msghdr msg_name define sys/types.h $d_socket sys/socket.h $i_sysuio sys/uio.h
-eval $hasfield
-case "$d_msghdr_s" in
-"$define") echo "Yup, it does." >&4
- ;;
-*) echo "Nope, it doesn't." >&4
- ;;
-esac
-
-$echo $n "Checking to see if your system supports struct cmsghdr...$c" >&4
-set d_cmsghdr_s cmsghdr cmsg_len define sys/types.h $d_socket sys/socket.h $i_sysuio sys/uio.h
-eval $hasfield
-case "$d_cmsghdr_s" in
-"$define") echo "Yup, it does." >&4
- ;;
-*) echo "Nope, it doesn't." >&4
- ;;
-esac
-
: check for const keyword
echo " "
echo 'Checking to see if your C compiler knows about "const"...' >&4
set d_dbl_dig
eval $setvar
-
-if $test X"$use64bits" = X"$define"; then
- : see if dbminit64 exists
- set dbminit64 d_dbminit64
- eval $inlibc
-
- : see if dbmclose64 exists
- set dbmclose64 d_dbmclose64
- eval $inlibc
-
- : see if fetch64 exists
- set fetch64 d_fetch64
- eval $inlibc
-
- : see if store64 exists
- set store64 d_store64
- eval $inlibc
-
- : see if delete64 exists
- set delete64 d_delete64
- eval $inlibc
-
- : see if firstkey64 exists
- set firstkey64 d_firstkey64
- eval $inlibc
-
- : see if nextkey64 exists
- set nextkey64 d_nextkey64
- eval $inlibc
-else
- val="$undef"
- for xxx in d_dbminit64 d_dbmclose64 d_fetch64 d_store64 d_delete64 d_firstkey64 d_nextkey64
- do
- set $xxx
- eval $setvar
- done
-fi
-
: see if difftime exists
set difftime d_difftime
eval $inlibc
-: see if sys/stat.h is available
-set sys/stat.h i_sysstat
-eval $inhdr
-
: see if this is a dirent system
echo " "
if xinc=`./findhdr dirent.h`; $test "$xinc"; then
echo "Good, your directory entry keeps length information in d_namlen." >&4
val="$define"
else
- echo "Your directory entry does not know about the d_namlen field." >&4
- val="$undef"
-fi
-set d_dirnamlen
-eval $setvar
-$rm -f try.c
-
-
-if $test X"$use64bits" = X"$define"; then
- : see if fstat64 exists
- set fstat64 d_fstat64
- eval $inlibc
-
- : see if ftruncate64 exists
- set ftruncate64 d_ftruncate64
- eval $inlibc
-
- : see if lockf64 exists
- set lockf64 d_lockf64
- eval $inlibc
-
- : see if llseek exists
- set llseek d_llseek
- eval $inlibc
-
- : see if lseek64 exists
- set lseek64 d_lseek64
- eval $inlibc
-
- : see if lstat64 exists
- set lstat64 d_lstat64
- eval $inlibc
-
- : see if open64 exists
- set open64 d_open64
- eval $inlibc
-
- : see if opendir64 exists
- set opendir64 d_opendir64
- eval $inlibc
-
- : see if readdir64 exists
- set readdir64 d_readdir64
- eval $inlibc
-
- : see if seekdir64 exists
- set seekdir64 d_seekdir64
- eval $inlibc
-
- : see if stat64 exists
- set stat64 d_stat64
- eval $inlibc
-
- : see if telldir64 exists
- set telldir64 d_telldir64
- eval $inlibc
-
- : see if truncate64 exists
- set truncate64 d_truncate64
- eval $inlibc
-
- : check for off64_t
- echo " "
- echo $n "Checking to see if your system supports off64_t...$c" >&4
- $cat >try.c <<EOCP
-#include <sys/types.h>
-#include <unistd.h>
-off64_t foo() { off64_t x; x = 7; return x; }'
-EOCP
- if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define"
- echo " Yup, it does." >&4
- else
- val="$undef"
- echo " Nope, it doesn't." >&4
- fi
- $rm -f try.*
- set d_off64_t
- eval $setvar
-
- : check for offset_t
- echo " "
- echo $n "Checking to see if your system supports offset_t...$c" >&4
- $cat >try.c <<EOCP
-#include <sys/types.h>
-#include <unistd.h>
-offset_t foo() { offset_t x; x = 7; return x; }'
-EOCP
- if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define"
- echo " Yup, it does." >&4
- else
- val="$undef"
- echo " Nope, it doesn't." >&4
- fi
- $rm -f try.*
- set d_offset_t
- eval $setvar
-
- : check for ino64_t
- echo " "
- echo $n "Checking to see if your system supports ino64_t...$c" >&4
- val="$undef"
- case "$i_sysstat" in
- "$define" )
- $cat >try.c <<EOCP
-#include <sys/types.h>
-#include <sys/stat.h>
-ino64_t foo() { ino64_t x; x = 7; return x; }'
-EOCP
- if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define"
- fi
- $rm -f try.*
- ;;
- esac
- if $test "X$val" = X"$define"; then
- echo " Yup, it does." >&4
- else
- echo " Nope, it doesn't." >&4
- fi
- set d_ino64_t
- eval $setvar
-
- : check for struct flock64
- echo " "
- echo "Checking to see if your system supports struct flock64..." >&4
- if $h_fcntl; then
- set d_flock64_s flock64 l_len define fcntl.h
- eval $hasfield
- else
- val="$undef"
- set d_flock64_s
- eval $setvar
- fi
- case "$d_flock64_s" in
- "$define") echo "Yup, it does." >&4
- ;;
- *) echo "Nope, it doesn't." >&4
- ;;
- esac
-
- : check for struct dirent64
- echo " "
- echo "Checking to see if your system supports struct dirent64..." >&4
- set d_dirent64_s dirent64 d_off $i_dirent dirent.h
- eval $hasfield
- case "$d_dirent64_s" in
- "$define") echo "Yup, it does." >&4
- ;;
- *) echo "Nope, it doesn't." >&4
- ;;
- esac
-
-else
- val="$undef"
- for xxx in d_fstat64 d_ftruncate64 d_lockf64 d_lseek64 d_lstat64 d_open64 d_opendir64 d_readdir64 d_seekdir64 d_stat64 d_telldir64 d_truncate64 d_off64_t d_offset_t d_ino64_t d_flock64_s d_dirent64_s
- do
- set $xxx
- eval $setvar
- done
+ echo "Your directory entry does not know about the d_namlen field." >&4
+ val="$undef"
fi
+set d_dirnamlen
+eval $setvar
+$rm -f try.c
: see if dlerror exists
xxx_runnm="$runnm"
esac
else
echo "I can't compile and run the test program." >&4
+ echo "I'm guessing that dlsym doesn't need a leading underscore." >&4
fi
;;
esac
eval $setvar
$rm -f open3*
+: see which of string.h or strings.h is needed
+echo " "
+strings=`./findhdr string.h`
+if $test "$strings" && $test -r "$strings"; then
+ echo "Using <string.h> instead of <strings.h>." >&4
+ val="$define"
+else
+ val="$undef"
+ strings=`./findhdr strings.h`
+ if $test "$strings" && $test -r "$strings"; then
+ echo "Using <strings.h> instead of <string.h>." >&4
+ else
+ echo "No string header found -- You'll surely have problems." >&4
+ fi
+fi
+set i_string
+eval $setvar
+case "$i_string" in
+"$undef") strings=`./findhdr strings.h`;;
+*) strings=`./findhdr string.h`;;
+esac
+
: check for non-blocking I/O stuff
case "$h_sysfile" in
true) echo "#include <sys/file.h>" > head.c;;
'')
$cat head.c > try.c
$cat >>try.c <<'EOCP'
+#include <stdio.h>
int main() {
#ifdef O_NONBLOCK
printf("O_NONBLOCK\n");
#include <errno.h>
#include <sys/types.h>
#include <signal.h>
+#include <stdio.h>
#define MY_O_NONBLOCK $o_nonblock
#ifndef errno /* XXX need better Configure test */
extern int errno;
#endif
+#$i_unistd I_UNISTD
+#ifdef I_UNISTD
+#include <unistd.h>
+#endif
+#$i_string I_STRING
+#ifdef I_STRING
+#include <string.h>
+#else
+#include <strings.h>
+#endif
$signal_t blech(x) int x; { exit(3); }
EOCP
$cat >> try.c <<'EOCP'
set fcntl d_fcntl
eval $inlibc
+hasfield='varname=$1; struct=$2; field=$3; shift; shift; shift;
+while $test $# -ge 2; do
+ case "$1" in
+ $define) echo "#include <$2>";;
+ esac ;
+ shift 2;
+done > try.c;
+echo "int main () { struct $struct foo; char* bar; bar = (char*)foo.$field; }" >> try.c;
+set try;
+if eval $compile; then
+ val="$define";
+else
+ val="$undef";
+fi;
+set $varname;
+eval $setvar;
+$rm -f try.c try.o'
+
+socketlib=''
+sockethdr=''
+: see whether socket exists
+echo " "
+$echo $n "Hmm... $c" >&4
+if set socket val -f d_socket; eval $csym; $val; then
+ echo "Looks like you have Berkeley networking support." >&4
+ d_socket="$define"
+ if set setsockopt val -f; eval $csym; $val; then
+ d_oldsock="$undef"
+ else
+ echo "...but it uses the old BSD 4.1c interface, rather than 4.2." >&4
+ d_oldsock="$define"
+ fi
+else
+ if $contains socklib libc.list >/dev/null 2>&1; then
+ echo "Looks like you have Berkeley networking support." >&4
+ d_socket="$define"
+ : we will have to assume that it supports the 4.2 BSD interface
+ d_oldsock="$undef"
+ else
+ echo "You don't have Berkeley networking in libc$_a..." >&4
+ if test "X$d_socket" = "X$define"; then
+ echo "...but you seem to believe that you have sockets." >&4
+ else
+ for net in net socket
+ do
+ if test -f /usr/lib/lib$net$_a; then
+ ( ($nm $nm_opt /usr/lib/lib$net$_a | eval $nm_extract) || \
+ $ar t /usr/lib/lib$net$_a) 2>/dev/null >> libc.list
+ if $contains socket libc.list >/dev/null 2>&1; then
+ d_socket="$define"
+ socketlib="-l$net"
+ case "$net" in
+ net)
+ echo "...but the Wollongong group seems to have hacked it in." >&4
+ sockethdr="-I/usr/netinclude"
+ ;;
+ esac
+ echo "Found Berkeley sockets interface in lib$net." >& 4
+ if $contains setsockopt libc.list >/dev/null 2>&1; then
+ d_oldsock="$undef"
+ else
+ echo "...using the old BSD 4.1c interface, rather than 4.2." >&4
+ d_oldsock="$define"
+ fi
+ break
+ fi
+ fi
+ done
+ if test "X$d_socket" != "X$define"; then
+ echo "or anywhere else I see." >&4
+ d_socket="$undef"
+ d_oldsock="$undef"
+ fi
+ fi
+ fi
+fi
+
+: see if socketpair exists
+set socketpair d_sockpair
+eval $inlibc
+
+
+echo " "
+echo "Checking the availability of certain socket constants..." >& 4
+for ENUM in MSG_CTRUNC MSG_DONTROUTE MSG_OOB MSG_PEEK MSG_PROXY SCM_RIGHTS; do
+ enum=`$echo $ENUM|./tr '[A-Z]' '[a-z]'`
+ $cat >try.c <<EOF
+#include <sys/types.h>
+#include <sys/socket.h>
+int main() {
+ int i = $ENUM;
+}
+EOF
+ val="$undef"
+ set try; if eval $compile; then
+ val="$define"
+ fi
+ set d_${enum}; eval $setvar
+ $rm -f try.c try
+done
+
: see if sys/select.h has to be included
set sys/select.h i_sysselct
eval $inhdr
set fgetpos d_fgetpos
eval $inlibc
-
-if $test X"$use64bits" = X"$define"; then
- : see if fgetpos64 exists
- set fgetpos64 d_fgetpos64
- eval $inlibc
-
- : see if fopen64 exists
- set freopen64 d_fopen64
- eval $inlibc
-
- : see if freopen64 exists
- set freopen64 d_freopen64
- eval $inlibc
-
- : see if fseek64 exists
- set fseek64 d_fseek64
- eval $inlibc
-
- : see if fseeko64 exists
- set fseeko64 d_fseeko64
- eval $inlibc
-
- : see if fsetpos64 exists
- set fsetpos64 d_fsetpos64
- eval $inlibc
-
- : see if ftell64 exists
- set ftell64 d_ftell64
- eval $inlibc
-
- : see if ftello64 exists
- set ftello64 d_ftello64
- eval $inlibc
-
- : see if tmpfile64 exists
- set tmpfile64 d_tmpfile64
- eval $inlibc
-else
- val="$undef"
- for xxx in d_fgetpos64 d_fopen64 d_freopen64 d_fseek64 d_fseeko64 d_fsetpos64 d_ftell64 d_ftello64 d_tmpfile64
- do
- set $xxx
- eval $setvar
- done
-fi
-
: see if flock exists
set flock d_flock
eval $inlibc
set fpathconf d_fpathconf
eval $inlibc
-: see if fseeko exists
-set fseeko d_fseeko
-eval $inlibc
-: see if fsetpos exists
-set fsetpos d_fsetpos
-eval $inlibc
+: check for fpos64_t
+echo " "
+echo "Checking to see if you have fpos64_t..." >&4
+$cat >try.c <<EOCP
+#include <stdio.h>
+int main() { fpos64_t x = 7; }
+EOCP
+set try
+if eval $compile; then
+ val="$define"
+ echo "You have fpos64_t."
+else
+ val="$undef"
+ echo "You do not have fpos64_t."
+ case "$fpossize" in
+ 8) echo "(Your fpos_t is 64 bits, so you could use that.)" ;;
+ esac
+fi
+$rm -f try.* try
+set d_fpos64_t
+eval $setvar
+
+hasstruct='varname=$1; struct=$2; shift; shift;
+while $test $# -ge 2; do
+ case "$1" in
+ $define) echo "#include <$2>";;
+ esac ;
+ shift 2;
+done > try.c;
+echo "int main () { struct $struct foo; }" >> try.c;
+set try;
+if eval $compile; then
+ val="$define";
+else
+ val="$undef";
+fi;
+set $varname;
+eval $setvar;
+$rm -f try.c try.o'
: see if this is a sys/param system
set sys/param.h i_sysparam
set sys/mount.h i_sysmount
eval $inhdr
+: see if sys/types.h has to be included
+set sys/types.h i_systypes
+eval $inhdr
+
+
+echo " "
+echo "Checking to see if your system supports struct fs_data..." >&4
+set d_fs_data_s fs_data $i_systypes sys/types.h $i_sysparam sys/param.h $i_sysmount sys/mount.h
+eval $hasstruct
+case "$d_fs_data_s" in
+"$define") echo "Yes, it does." ;;
+*) echo "No, it doesn't." ;;
+esac
+
+: see if fseeko exists
+set fseeko d_fseeko
+eval $inlibc
+case "$longsize" in
+8) echo "(Your long is 64 bits, so you could use fseek.)" ;;
+esac
-: see if statfs exists
-set statfs d_statfs
+: see if fsetpos exists
+set fsetpos d_fsetpos
eval $inlibc
+
: see if fstatfs exists
set fstatfs d_fstatfs
eval $inlibc
-: see if statfs knows about mount flags
-set d_statfsflags statfs f_flags $i_sysparam sys/param.h $i_sysmount sys/mount.h
-eval $hasfield
-
: see if statvfs exists
set statvfs d_statvfs
: see if ftello exists
set ftello d_ftello
eval $inlibc
+case "$longsize" in
+8) echo "(Your long is 64 bits, so you could use ftell.)" ;;
+esac
+
+: see if getcwd exists
+set getcwd d_getcwd
+eval $inlibc
+
+
+: see if getfsstat exists
+set getfsstat d_getfsstat
+eval $inlibc
: see if getgrent exists
set getgrent d_getgrent
set getlogin d_getlogin
eval $inlibc
+: see if getmnt exists
+set getmnt d_getmnt
+eval $inlibc
+
: see if getmntent exists
set getmntent d_getmntent
eval $inlibc
set d_htonl
eval $setvar
-: see which of string.h or strings.h is needed
-echo " "
-strings=`./findhdr string.h`
-if $test "$strings" && $test -r "$strings"; then
- echo "Using <string.h> instead of <strings.h>." >&4
- val="$define"
-else
- val="$undef"
- strings=`./findhdr strings.h`
- if $test "$strings" && $test -r "$strings"; then
- echo "Using <strings.h> instead of <string.h>." >&4
- else
- echo "No string header found -- You'll surely have problems." >&4
- fi
-fi
-set i_string
-eval $setvar
-case "$i_string" in
-"$undef") strings=`./findhdr strings.h`;;
-*) strings=`./findhdr string.h`;;
-esac
+: see if iconv exists
+set iconv d_iconv
+eval $inlibc
: index or strchr
echo " "
eval $setvar
: check for int64_t
-case "$use64bits" in
-"$define" )
- echo " "
- echo $n "Checking to see if your system supports int64_t...$c" >&4
- $cat >try.c <<EOCP
+echo " "
+echo "Checking to see if you have int64_t..." >&4
+$cat >try.c <<EOCP
#include <sys/types.h>
#$i_inttypes I_INTTYPES
#ifdef I_INTTYPES
#include <inttypes.h>
-#endif
-int64_t foo() { int64_t x; x = 7; return x; }
-EOCP
- if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define"
- echo " Yup, it does." >&4
- else
- val="$undef"
- echo " Nope, it doesn't." >&4
- fi
- $rm -f try.*
- ;;
-*) val="$undef"
- ;;
-esac
-set d_int64t
+#endif
+int main() { int64_t x = 7; }
+EOCP
+set try
+if eval $compile; then
+ val="$define"
+ echo "You have int64_t."
+else
+ val="$undef"
+ echo "You do not have int64_t."
+fi
+$rm -f try try.*
+set d_int64_t
eval $setvar
-
: Look for isascii
echo " "
$cat >isascii.c <<'EOCP'
set d_lchown
eval $setvar
+: See if number of significant digits in a double precision number is known
+echo " "
+$cat >ldbl_dig.c <<EOM
+#$i_limits I_LIMITS
+#$i_float I_FLOAT
+#ifdef I_LIMITS
+#include <limits.h>
+#endif
+#ifdef I_FLOAT
+#include <float.h>
+#endif
+#ifdef LDBL_DIG
+printf("Contains LDBL_DIG");
+#endif
+EOM
+$cppstdin $cppflags $cppminus < ldbl_dig.c >ldbl_dig.E 2>/dev/null
+if $contains 'LDBL_DIG' ldbl_dig.E >/dev/null 2>&1; then
+ echo "LDBL_DIG found." >&4
+ val="$define"
+else
+ echo "LDBL_DIG NOT found." >&4
+ val="$undef"
+fi
+$rm -f ldbl_dig.?
+set d_ldbl_dig
+eval $setvar
+
: see if link exists
set link d_link
eval $inlibc
set lockf d_lockf
eval $inlibc
-: check for length of double
-echo " "
-case "$doublesize" in
-'')
- $echo $n "Checking to see how big your double precision numbers are...$c" >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", sizeof(double));
-}
-EOCP
- set try
- if eval $compile_ok; then
- doublesize=`./try`
- $echo " $doublesize bytes." >&4
- else
- dflt='8'
- echo "(I can't seem to compile the test program. Guessing...)"
- rp="What is the size of a double precision number (in bytes)?"
- . ./myread
- doublesize="$ans"
- fi
- ;;
-esac
-$rm -f try.c try
-
-: check for long doubles
-echo " "
-echo $n "Checking to see if your system supports long doubles...$c" >&4
-echo 'long double foo() { long double x; x = 7.0; return x; }' > try.c
-if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
- val="$define"
- echo " Yup, it does." >&4
-else
- val="$undef"
- echo " Nope, it doesn't." >&4
-fi
-$rm try.*
-set d_longdbl
-eval $setvar
-
-: check for length of long double
-case "${d_longdbl}${longdblsize}" in
-$define)
- echo " "
- $echo $n "Checking to see how big your long doubles are...$c" >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", sizeof(long double));
-}
-EOCP
- set try
- if eval $compile; then
- longdblsize=`./try`
- $echo " $longdblsize bytes." >&4
- else
- dflt='8'
- echo " "
- echo "(I can't seem to compile the test program. Guessing...)" >&4
- rp="What is the size of a long double (in bytes)?"
- . ./myread
- longdblsize="$ans"
- fi
- if $test "X$doublesize" = "X$longdblsize"; then
- echo "(That isn't any different from an ordinary double.)"
- fi
- ;;
-esac
-$rm -f try.c try
-
: check for long long
echo " "
-echo $n "Checking to see if your system supports long long...$c" >&4
-echo 'long long foo() { long long x; x = 7; return x; }' > try.c
-if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+echo "Checking to see if you have long long..." >&4
+echo 'int main() { long long x = 7; return 0; }' > try.c
+set try
+if eval $compile; then
val="$define"
- echo " Yup, it does." >&4
+ echo "You have have long long."
else
val="$undef"
- echo " Nope, it doesn't." >&4
+ echo "You do not have long long."
fi
$rm try.*
set d_longlong
case "${d_longlong}${longlongsize}" in
$define)
echo " "
- $echo $n "Checking to see how big your long longs are...$c" >&4
+ echo "Checking to see how big your long longs are..." >&4
$cat >try.c <<'EOCP'
#include <stdio.h>
int main()
{
- printf("%d\n", sizeof(long long));
+ printf("%d\n", (int)sizeof(long long));
+ return(0);
}
EOCP
set try
if eval $compile_ok; then
- longlongsize=`./try`
- $echo " $longlongsize bytes." >&4
+ longlongsize=`./try$exe_ext`
+ echo "Your long longs are $longlongsize bytes long."
else
dflt='8'
echo " "
fi
;;
esac
-$rm -f try.c try
+$rm -f try.* try
+
+: see if prototype for lseek is available
+echo " "
+set d_lseekproto lseek $i_systypes sys/types.h $i_unistd unistd.h
+eval $hasproto
: see if lstat exists
set lstat d_lstat
set mkdir d_mkdir
eval $inlibc
+: see if mkdtemp exists
+set mkdtemp d_mkdtemp
+eval $inlibc
+
: see if mkfifo exists
set mkfifo d_mkfifo
eval $inlibc
+: see if mkstemp exists
+set mkstemp d_mkstemp
+eval $inlibc
+
+: see if mkstemps exists
+set mkstemps d_mkstemps
+eval $inlibc
+
: see if mktime exists
set mktime d_mktime
eval $inlibc
else
mmaptype='caddr_t'
fi
- echo "and it returns ($mmaptype)." >&4
+ echo "and it returns ($mmaptype)." >&4
+ ;;
+esac
+
+
+
+: see if mprotect exists
+set mprotect d_mprotect
+eval $inlibc
+
+: see if msgctl exists
+set msgctl d_msgctl
+eval $inlibc
+
+: see if msgget exists
+set msgget d_msgget
+eval $inlibc
+
+: see if msgsnd exists
+set msgsnd d_msgsnd
+eval $inlibc
+
+: see if msgrcv exists
+set msgrcv d_msgrcv
+eval $inlibc
+
+: see how much of the 'msg*(2)' library is present.
+h_msg=true
+echo " "
+case "$d_msgctl$d_msgget$d_msgsnd$d_msgrcv" in
+*"$undef"*) h_msg=false;;
+esac
+case "$osname" in
+freebsd)
+ case "`ipcs 2>&1`" in
+ "SVID messages"*"not configured"*)
+ echo "Your $osname does not have the msg*(2) configured." >&4
+ h_msg=false
+ val="$undef"
+ set msgctl d_msgctl
+ eval $setvar
+ set msgget d_msgget
+ eval $setvar
+ set msgsnd d_msgsnd
+ eval $setvar
+ set msgrcv d_msgrcv
+ eval $setvar
+ ;;
+ esac
+ ;;
+esac
+: we could also check for sys/ipc.h ...
+if $h_msg && $test `./findhdr sys/msg.h`; then
+ echo "You have the full msg*(2) library." >&4
+ val="$define"
+else
+ echo "You don't have the full msg*(2) library." >&4
+ val="$undef"
+fi
+set d_msg
+eval $setvar
+
+: see if msync exists
+set msync d_msync
+eval $inlibc
+
+: see if munmap exists
+set munmap d_munmap
+eval $inlibc
+
+: see if nice exists
+set nice d_nice
+eval $inlibc
+
+
+echo " "
+echo "Checking which 64-bit integer type we could use..." >&4
+
+case "$intsize" in
+8) val=int
+ set quadtype
+ eval $setvar
+ val='"unsigned int"'
+ set uquadtype
+ eval $setvar
+ quadkind=1
+ ;;
+*) case "$longsize" in
+ 8) val=long
+ set quadtype
+ eval $setvar
+ val='"unsigned long"'
+ set uquadtype
+ eval $setvar
+ quadkind=2
+ ;;
+ *) case "$d_longlong:$longlongsize" in
+ define:8)
+ val='"long long"'
+ set quadtype
+ eval $setvar
+ val='"unsigned long long"'
+ set uquadtype
+ eval $setvar
+ quadkind=3
+ ;;
+ *) case "$d_int64_t" in
+ define)
+ val=int64_t
+ set quadtype
+ eval $setvar
+ val=uint64_t
+ set uquadtype
+ eval $setvar
+ quadkind=4
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
+case "$quadtype" in
+'') echo "Alas, no 64-bit integer types in sight." >&4
+ d_quad="$undef"
+ ;;
+*) if test X"$use64bitint" = Xdefine -o X"$longsize" = X8; then
+ verb="will"
+ else
+ verb="could"
+ fi
+ echo "We $verb use '$quadtype' for 64-bit integers." >&4
+ d_quad="$define"
+ ;;
+esac
+
+: check for length of character
+echo " "
+case "$charsize" in
+'')
+ echo "Checking to see how big your characters are (hey, you never know)..." >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", (int)sizeof(char));
+ exit(0);
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ dflt=`./try`
+ else
+ dflt='1'
+ echo "(I can't seem to compile the test program. Guessing...)"
+ fi
+ ;;
+*)
+ dflt="$charsize"
+ ;;
+esac
+rp="What is the size of a character (in bytes)?"
+. ./myread
+charsize="$ans"
+$rm -f try.c try
+
+
+echo " "
+$echo "Choosing the C types to be used for Perl's internal types..." >&4
+
+case "$use64bitint:$d_quad:$quadtype" in
+define:define:?*)
+ ivtype="$quadtype"
+ uvtype="$uquadtype"
+ ivsize=8
+ uvsize=8
+ ;;
+*) ivtype="long"
+ uvtype="unsigned long"
+ ivsize=$longsize
+ uvsize=$longsize
+ ;;
+esac
+
+case "$uselongdouble:$d_longdbl" in
+define:define)
+ nvtype="long double"
+ nvsize=$longdblsize
+ ;;
+*) nvtype=double
+ nvsize=$doublesize
+ ;;
+esac
+
+$echo "(IV will be "$ivtype", $ivsize bytes)"
+$echo "(UV will be "$uvtype", $uvsize bytes)"
+$echo "(NV will be "$nvtype", $nvsize bytes)"
+
+$cat >try.c <<EOCP
+#$i_inttypes I_INTTYPES
+#ifdef I_INTTYPES
+#include <inttypes.h>
+#endif
+#include <stdio.h>
+int main() {
+#ifdef INT8
+ int8_t i = INT8_MAX;
+ uint8_t u = UINT8_MAX;
+ printf("int8_t\n");
+#endif
+#ifdef INT16
+ int16_t i = INT16_MAX;
+ uint16_t i = UINT16_MAX;
+ printf("int16_t\n");
+#endif
+#ifdef INT32
+ int32_t i = INT32_MAX;
+ uint32_t u = UINT32_MAX;
+ printf("int32_t\n");
+#endif
+}
+EOCP
+
+case "$i8type" in
+'') case "$charsize" in
+ 1) i8type=char
+ u8type="unsigned char"
+ i8size=$charsize
+ u8size=$charsize
+ ;;
+ esac
+ ;;
+esac
+case "$i8type" in
+'') set try -DINT8
+ if eval $compile; then
+ case "`./try$exe_ext`" in
+ int8_t) i8type=int8_t
+ u8type=uint8_t
+ i8size=1
+ u8size=1
+ ;;
+ esac
+ fi
+ ;;
+esac
+case "$i8type" in
+'') if $test $charsize -ge 1; then
+ i8type=char
+ u8type="unsigned char"
+ i8size=$charsize
+ u8size=$charsize
+ fi
+ ;;
+esac
+
+case "$i16type" in
+'') case "$shortsize" in
+ 2) i16type=short
+ u16type="unsigned short"
+ i16size=$shortsize
+ u16size=$shortsize
+ ;;
+ esac
+ ;;
+esac
+case "$i16type" in
+'') set try -DINT16
+ if eval $compile; then
+ case "`./try$exe_ext`" in
+ int16_t)
+ i16type=int16_t
+ u16type=uint16_t
+ i16size=2
+ u16size=2
+ ;;
+ esac
+ fi
+ ;;
+esac
+case "$i16type" in
+'') if $test $shortsize -ge 2; then
+ i16type=short
+ u16type="unsigned short"
+ i16size=$shortsize
+ u16size=$shortsize
+ fi
;;
esac
+case "$i32type" in
+'') case "$longsize" in
+ 4) i32type=long
+ u32type="unsigned long"
+ i32size=$longsize
+ u32size=$longsize
+ ;;
+ *) case "$intsize" in
+ 4) i32type=int
+ u32type="unsigned int"
+ i32size=$intsize
+ u32size=$intsize
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+case "$i32type" in
+'') set try -DINT32
+ if eval $compile; then
+ case "`./try$exe_ext`" in
+ int32_t)
+ i32type=int32_t
+ u32type=uint32_t
+ i32size=4
+ u32size=4
+ ;;
+ esac
+ fi
+ ;;
+esac
+case "$i32type" in
+'') if $test $intsize -ge 4; then
+ i32type=int
+ u32type="unsigned int"
+ i32size=$intsize
+ u32size=$intsize
+ fi
+ ;;
+esac
+case "$i64type" in
+'') case "$d_quad:$quadtype" in
+ define:?*)
+ i64type="$quadtype"
+ u64type="$uquadtype"
+ i64size=8
+ u64size=8
+ ;;
+ esac
+ ;;
+esac
-: see if mprotect exists
-set mprotect d_mprotect
-eval $inlibc
-
-: see if msgctl exists
-set msgctl d_msgctl
-eval $inlibc
-
-: see if msgget exists
-set msgget d_msgget
-eval $inlibc
+$echo "Checking whether your NVs can preserve your UVs..." >&4
+$cat <<EOP >try.c
+#include <stdio.h>
+int main() {
+ $uvtype k = ($uvtype)~0, l;
+ $nvtype d;
+ l = k;
+ d = ($nvtype)l;
+ l = ($uvtype)d;
+ if (l == k)
+ printf("preserve\n");
+ exit(0);
+}
+EOP
+set try
+if eval $compile; then
+ case "`./try$exe_ext`" in
+ preserve) d_nv_preserves_uv="$define" ;;
+ esac
+fi
+case "$d_nv_preserves_uv" in
+$define) $echo "Yes, they can." 2>&1 ;;
+*) $echo "No, they can't." 2>&1
+ d_nv_preserves_uv="$undef"
+ ;;
+esac
-: see if msgsnd exists
-set msgsnd d_msgsnd
-eval $inlibc
+$rm -f try.* try
-: see if msgrcv exists
-set msgrcv d_msgrcv
-eval $inlibc
-: see how much of the 'msg*(2)' library is present.
-h_msg=true
+: check for off64_t
echo " "
-case "$d_msgctl$d_msgget$d_msgsnd$d_msgrcv" in
-*"$undef"*) h_msg=false;;
-esac
-case "$osname" in
-freebsd)
- case "`ipcs 2>&1`" in
- "SVID messages"*"not configured"*)
- echo "Your $osname does not have the msg*(2) configured." >&4
- h_msg=false
- val="$undef"
- set msgctl d_msgctl
- eval $setvar
- set msgget d_msgget
- eval $setvar
- set msgsnd d_msgsnd
- eval $setvar
- set msgrcv d_msgrcv
- eval $setvar
- ;;
- esac
- ;;
-esac
-: we could also check for sys/ipc.h ...
-if $h_msg && $test `./findhdr sys/msg.h`; then
- echo "You have the full msg*(2) library." >&4
+echo "Checking to see if you have off64_t..." >&4
+$cat >try.c <<EOCP
+#include <sys/types.h>
+#include <unistd.h>
+int main() { off64_t x = 7; }
+EOCP
+set try
+if eval $compile; then
val="$define"
+ echo "You have off64_t."
else
- echo "You don't have the full msg*(2) library." >&4
val="$undef"
+ echo "You do not have off64_t."
+ case "$lseeksize" in
+ 8) echo "(Your off_t is 64 bits, so you could use that.)" ;;
+ esac
fi
-set d_msg
+$rm -f try.* try
+set d_off64_t
eval $setvar
-: see if msync exists
-set msync d_msync
-eval $inlibc
-
-: see if munmap exists
-set munmap d_munmap
-eval $inlibc
-
-: see if nice exists
-set nice d_nice
-eval $inlibc
-
: see if POSIX threads are available
-if test "X$usethreads" = "X$define"; then
- set pthread.h i_pthread
- eval $inhdr
-else
- i_pthread="$undef"
-fi
+set pthread.h i_pthread
+eval $inhdr
+
set readlink d_readlink
eval $inlibc
-: see if readv exists
-set readv d_readv
-eval $inlibc
-
: see if rename exists
set rename d_rename
eval $inlibc
int main()
{
struct sigaction act, oact;
+ act.sa_flags = 0;
+ oact.sa_handler = 0;
+ /* so that act and oact are used */
+ exit(act.sa_flags == 0 && oact.sa_handler == 0);
}
EOP
set try
eval $setvar
$rm -f try.c try
+: see if sys/stat.h is available
+set sys/stat.h i_sysstat
+eval $inhdr
+
+
: see if stat knows about block sizes
echo " "
+echo "Checking to see if your struct stat has st_blocks field..." >&4
set d_statblks stat st_blocks $i_sysstat sys/stat.h
eval $hasfield
+
+: see if this is a sys/vfs.h system
+set sys/vfs.h i_sysvfs
+eval $inhdr
+
+
+: see if this is a sys/statfs.h system
+set sys/statfs.h i_sysstatfs
+eval $inhdr
+
+
+echo " "
+echo "Checking to see if your system supports struct statfs..." >&4
+set d_statfs_s statfs $i_systypes sys/types.h $i_sysparam sys/param.h $i_sysmount sys/mount.h $i_sysvfs sys/vfs.h $i_sysstatfs sys/statfs.h
+eval $hasstruct
+case "$d_statfs_s" in
+"$define") echo "Yes, it does." ;;
+*) echo "No, it doesn't." ;;
+esac
+
+
+
+: see if struct statfs knows about f_flags
+case "$d_statfs_s" in
+define)
+ echo " "
+ echo "Checking to see if your struct statfs has f_flags field..." >&4
+ set d_statfs_f_flags statfs f_flags $i_systypes sys/types.h $i_sysparam sys/param.h $i_sysmount sys/mount.h $i_sysvfs sys/vfs.h $i_sysstatfs sys/statfs.h
+ eval $hasfield
+ ;;
+*) val="$undef"
+ set d_statfs_f_flags
+ eval $setvar
+ ;;
+esac
+case "$d_statfs_f_flags" in
+"$define") echo "Yes, it does." ;;
+*) echo "No, it doesn't." ;;
+esac
+
: see if _ptr and _cnt from stdio act std
echo " "
if $contains '_IO_fpos_t' `./findhdr stdio.h` `./findhdr libio.h` >/dev/null 2>&1 ; then
set strtol d_strtol
eval $inlibc
-: see if strtoul exists
-set strtoul d_strtoul
+: see if strtold exists
+set strtold d_strtold
eval $inlibc
-: see if strxfrm exists
-set strxfrm d_strxfrm
+: see if strtoll exists
+set strtoll d_strtoll
eval $inlibc
-: see if symlink exists
-set symlink d_symlink
-eval $inlibc
+case "$d_longlong-$d_strtoll" in
+"$define-$define")
+ $cat <<EOM
+Checking whether your strtoll() works okay...
+EOM
+ $cat >try.c <<'EOCP'
+#include <errno.h>
+#ifdef __hpux
+#define strtoll __strtoll
+#endif
+#include <stdio.h>
+extern long long int strtoll(char *s, char **, int);
+static int bad = 0;
+int check(char *s, long long ell, int een) {
+ long long gll;
+ errno = 0;
+ gll = strtoll(s, 0, 10);
+ if (!((gll == ell) && (errno == een)))
+ bad++;
+}
+int main() {
+ check(" 1", 1LL, 0);
+ check(" 0", 0LL, 0);
+ check("-1", -1LL, 0);
+ check("-9223372036854775808", -9223372036854775808LL, 0);
+ check("-9223372036854775808", -9223372036854775808LL, 0);
+ check(" 9223372036854775807", 9223372036854775807LL, 0);
+ check("-9223372036854775808", -9223372036854775808LL, 0);
+ check(" 9223372036854775808", 9223372036854775807LL, ERANGE);
+ check("-9223372036854775809", -9223372036854775808LL, ERANGE);
+ if (!bad)
+ printf("ok\n");
+}
+EOCP
+ set try
+ if eval $compile; then
+ case "`./try`" in
+ ok) echo "Your strtoll() seems to be working okay." ;;
+ *) cat <<EOM >&4
+Your strtoll() doesn't seem to be working okay.
+EOM
+ d_strtoll="$undef"
+ ;;
+ esac
+ fi
+ ;;
+esac
-: see if syscall exists
-set syscall d_syscall
+: see if strtoul exists
+set strtoul d_strtoul
eval $inlibc
-: see if sysconf exists
-set sysconf d_sysconf
+: see if strtoull exists
+set strtoull d_strtoull
eval $inlibc
-: see if system exists
-set system d_system
-eval $inlibc
+case "$d_longlong-$d_strtoull" in
+"$define-$define")
+ $cat <<EOM
+Checking whether your strtoull() works okay...
+EOM
+ $cat >try.c <<'EOCP'
+#include <errno.h>
+#ifdef __hpux
+#define strtoull __strtoull
+#endif
+#include <stdio.h>
+extern unsigned long long int strtoull(char *s, char **, int);
+static int bad = 0;
+int check(char *s, long long eull, int een) {
+ long long gull;
+ errno = 0;
+ gull = strtoull(s, 0, 10);
+ if (!((gull == eull) && (errno == een)))
+ bad++;
+}
+int main() {
+ check(" 1", 1LL, 0);
+ check(" 0", 0LL, 0);
+ check("18446744073709551615", 18446744073709551615ULL, 0);
+ check("18446744073709551616", 18446744073709551615ULL, ERANGE);
+ if (!bad)
+ printf("ok\n");
+}
+EOCP
+ set try
+ if eval $compile; then
+ case "`./try`" in
+ ok) echo "Your strtoull() seems to be working okay." ;;
+ *) cat <<EOM >&4
+Your strtoull() doesn't seem to be working okay.
+EOM
+ d_strtoull="$undef"
+ ;;
+ esac
+ fi
+ ;;
+esac
-: see if tcgetpgrp exists
-set tcgetpgrp d_tcgetpgrp
+: see if strtouq exists
+set strtouq d_strtouq
eval $inlibc
-: see if tcsetpgrp exists
-set tcsetpgrp d_tcsetpgrp
+: see if strxfrm exists
+set strxfrm d_strxfrm
eval $inlibc
-: see if sys/types.h has to be included
-set sys/types.h i_systypes
-eval $inhdr
-
-: see if prototype for telldir is available
-echo " "
-set d_telldirproto telldir $i_systypes sys/types.h $i_dirent dirent.h
-eval $hasproto
-
-: define an is-a-typedef? function
-typedef='type=$1; var=$2; def=$3; shift; shift; shift; inclist=$@;
-case "$inclist" in
-"") inclist="sys/types.h";;
-esac;
-eval "varval=\$$var";
-case "$varval" in
-"")
- $rm -f temp.c;
- for inc in $inclist; do
- echo "#include <$inc>" >>temp.c;
- done;
- echo "#ifdef $type" >> temp.c;
- echo "printf(\"We have $type\");" >> temp.c;
- echo "#endif" >> temp.c;
- $cppstdin $cppflags $cppminus < temp.c >temp.E 2>/dev/null;
- if $contains $type temp.E >/dev/null 2>&1; then
- eval "$var=\$type";
- else
- eval "$var=\$def";
- fi;
- $rm -f temp.?;;
-*) eval "$var=\$varval";;
-esac'
-
-: define an is-a-typedef? function that prompts if the type is not available.
-typedef_ask='type=$1; var=$2; def=$3; shift; shift; shift; inclist=$@;
-case "$inclist" in
-"") inclist="sys/types.h";;
-esac;
-eval "varval=\$$var";
-case "$varval" in
-"")
- $rm -f temp.c;
- for inc in $inclist; do
- echo "#include <$inc>" >>temp.c;
- done;
- echo "#ifdef $type" >> temp.c;
- echo "printf(\"We have $type\");" >> temp.c;
- echo "#endif" >> temp.c;
- $cppstdin $cppflags $cppminus < temp.c >temp.E 2>/dev/null;
- echo " " ;
- echo "$rp" | $sed -e "s/What is/Looking for/" -e "s/?/./";
- if $contains $type temp.E >/dev/null 2>&1; then
- echo "$type found." >&4;
- eval "$var=\$type";
- else
- echo "$type NOT found." >&4;
- dflt="$def";
- . ./myread ;
- eval "$var=\$ans";
- fi;
- $rm -f temp.?;;
-*) eval "$var=\$varval";;
-esac'
+: see if symlink exists
+set symlink d_symlink
+eval $inlibc
+
+: see if syscall exists
+set syscall d_syscall
+eval $inlibc
+
+: see if sysconf exists
+set sysconf d_sysconf
+eval $inlibc
+
+: see if system exists
+set system d_system
+eval $inlibc
+
+: see if tcgetpgrp exists
+set tcgetpgrp d_tcgetpgrp
+eval $inlibc
+
+: see if tcsetpgrp exists
+set tcsetpgrp d_tcsetpgrp
+eval $inlibc
+
+: see if prototype for telldir is available
+echo " "
+set d_telldirproto telldir $i_systypes sys/types.h $i_dirent dirent.h
+eval $hasproto
: see if this is a sys/times.h system
set sys/times.h i_systimes
set umask d_umask
eval $inlibc
+: see if ustat exists
+set ustat d_ustat
+eval $inlibc
+
: backward compatibility for d_hvfork
if test X$d_hvfork != X; then
d_vfork="$d_hvfork"
set wctomb d_wctomb
eval $inlibc
-: see if writev exists
-set writev d_writev
-eval $inlibc
-
: preserve RCS keywords in files with variable substitution, grrr
Date='$Date'
Id='$Id'
esac
case "$osname" in
-next|rhapsody) multiarch="$define" ;;
+next|rhapsody|darwin) multiarch="$define" ;;
esac
case "$multiarch" in
''|[nN]*) multiarch="$undef" ;;
*)
case "$alignbytes" in
'') echo "Checking alignment constraints..." >&4
- $cat >try.c <<'EOCP'
+ if $test "X$uselongdouble" = Xdefine -a "X$d_longdbl" = Xdefine; then
+ $cat >try.c <<'EOCP'
+typedef long double NV;
+EOCP
+ else
+ $cat >try.c <<'EOCP'
+typedef double NV;
+EOCP
+ fi
+ $cat >>try.c <<'EOCP'
+#include <stdio.h>
struct foobar {
char foo;
- double bar;
+ NV bar;
} try_algn;
int main()
{
- printf("%d\n", (char *)&try_algn.bar - (char *)&try_algn.foo);
+ printf("%d\n", (int)((char *)&try_algn.bar - (char *)&try_algn.foo));
+ return(0);
}
EOCP
set try
esac
+: set the base revision
+baserev=5.0
+
: check for ordering of bytes in a long
echo " "
case "$crosscompile$multiarch" in
skipping the byteorder check.
EOM
- byteorder=''
+ byteorder='0xffff'
;;
*)
case "$byteorder" in
In the following, larger digits indicate more significance. A big-endian
machine like a Pyramid or a Motorola 680?0 chip will come out to 4321. A
little-endian machine like a Vax or an Intel 80?86 chip would be 1234. Other
-machines may have weird orders like 3412. A Cray will report 87654321. If
-the test program works the default is probably right.
+machines may have weird orders like 3412. A Cray will report 87654321,
+an Alpha will report 12345678. If the test program works the default is
+probably right.
I'm now running the test program...
EOM
$cat >try.c <<'EOCP'
}
EOCP
set try
- if eval $compile && ./try; then
+ if eval $compile_ok && ./try; then
echo 'Looks OK.' >&4
else
echo "I can't use Berkeley DB with your <db.h>. I'll disable Berkeley DB." >&4
echo "You have EBCDIC." >&4
val="$define"
else
- echo "Nope, no EBCDIC. Assuming ASCII or some ISO Latin." >&4
+ echo "Nope, no EBCDIC, probably ASCII or some ISO Latin." >&4
fi
else
echo "I'm unable to compile the test program." >&4
$rm -f core try.core core.try.*
case "$fflushNULL" in
x) $cat >&4 <<EOM
-Your fflush(NULL) works okay.
+Your fflush(NULL) works okay for output streams.
+Let's see if it clobbers input pipes...
+EOM
+# As of mid-March 2000 all versions of Solaris appear to have a stdio
+# bug that improperly flushes the input end of pipes. So we avoid the
+# autoflush on fork/system/exec support for now. :-(
+$cat >tryp.c <<EOCP
+#include <stdio.h>
+int
+main(int argc, char **argv)
+{
+ char buf[1024];
+ int i;
+ char *bp = buf;
+ while (1) {
+ while ((i = getc(stdin)) != -1
+ && (*bp++ = i) != '\n'
+ && bp < &buf[1024])
+ /* DO NOTHING */ ;
+ *bp = '\0';
+ fprintf(stdout, "%s", buf);
+ fflush(NULL);
+ if (i == -1)
+ return 0;
+ bp = buf;
+ }
+}
+EOCP
+ fflushNULL="$define"
+ set tryp
+ if eval $compile; then
+ $rm -f tryp.out
+ $cat tryp.c | ./tryp$exe_ext 2>/dev/null > tryp.out
+ if cmp tryp.c tryp.out >/dev/null 2>&1; then
+ $cat >&4 <<EOM
+fflush(NULL) seems to behave okay with input streams.
+EOM
+ fflushNULL="$define"
+ else
+ $cat >&4 <<EOM
+Ouch, fflush(NULL) clobbers input pipes! We will not use it.
EOM
- fflushNULL="$define"
+ fflushNULL="$undef"
+ fi
+ fi
+ $rm -f core tryp.c tryp.core core.tryp.*
;;
'') $cat >&4 <<EOM
Your fflush(NULL) isn't working (contrary to ANSI C).
fflushNULL="$undef"
;;
esac
-: check explicit looping only if NULL did not work
+: check explicit looping only if NULL did not work, and if the pipe
+: bug does not show up on an explicit flush too
case "$fflushNULL" in
"$undef")
- : check for fflush all behaviour
- case "$fflushall" in
- '') set try -DTRY_FFLUSH_ALL $output
- if eval $compile; then
- $cat >&4 <<EOM
-(Now testing the other method--but note that also this may fail.)
+ $cat >tryp.c <<EOCP
+#include <stdio.h>
+int
+main(int argc, char **argv)
+{
+ char buf[1024];
+ int i;
+ char *bp = buf;
+ while (1) {
+ while ((i = getc(stdin)) != -1
+ && (*bp++ = i) != '\n'
+ && bp < &buf[1024])
+ /* DO NOTHING */ ;
+ *bp = '\0';
+ fprintf(stdout, "%s", buf);
+ fflush(stdin);
+ if (i == -1)
+ return 0;
+ bp = buf;
+ }
+}
+EOCP
+ set tryp
+ if eval $compile; then
+ $rm -f tryp.out
+ $cat tryp.c | ./tryp$exe_ext 2>/dev/null > tryp.out
+ if cmp tryp.c tryp.out >/dev/null 2>&1; then
+ $cat >&4 <<EOM
+Good, at least fflush(stdin) seems to behave okay when stdin is a pipe.
EOM
- $rm -f try.out
- ./try$exe_ext 2>/dev/null
- if $test -s try.out -a "X$?" = X42; then
- fflushall="`$cat try.out`"
- fi
- fi
- $rm -f core try.core core.try.*
+ : now check for fflushall behaviour
case "$fflushall" in
- x) $cat >&4 <<EOM
+ '') set try -DTRY_FFLUSH_ALL $output
+ if eval $compile; then
+ $cat >&4 <<EOM
+(Now testing the other method--but note that this also may fail.)
+EOM
+ $rm -f try.out
+ ./try$exe_ext 2>/dev/null
+ if $test -s try.out -a "X$?" = X42; then
+ fflushall="`$cat try.out`"
+ fi
+ fi
+ $rm -f core try.core core.try.*
+ case "$fflushall" in
+ x) $cat >&4 <<EOM
Whew. Flushing explicitly all the stdio streams works.
EOM
- fflushall="$define"
- ;;
- '') $cat >&4 <<EOM
+ fflushall="$define"
+ ;;
+ '') $cat >&4 <<EOM
Sigh. Flushing explicitly all the stdio streams doesn't work.
EOM
- fflushall="$undef"
- ;;
- *) $cat >&4 <<EOM
+ fflushall="$undef"
+ ;;
+ *) $cat >&4 <<EOM
Cannot figure out whether flushing stdio streams explicitly works or not.
I'm assuming it doesn't.
EOM
+ fflushall="$undef"
+ ;;
+ esac
+ ;;
+ "$define"|true|[yY]*)
+ fflushall="$define"
+ ;;
+ *)
fflushall="$undef"
;;
esac
- ;;
- "$define"|true|[yY]*)
- fflushall="$define"
- ;;
- *)
+ else
+ $cat >&4 <<EOM
+All is futile. Even fflush(stdin) clobbers input pipes!
+EOM
fflushall="$undef"
- ;;
- esac
+ fi
+ else
+ fflushall="$undef"
+ fi
+ $rm -f core tryp.c tryp.core core.tryp.*
;;
-*) fflushall="$undef"
+*) fflushall="$undef"
;;
esac
+
case "$fflushNULL$fflushall" in
undefundef)
$cat <<EOM
-I cannot figure out how to flush pending stdio output.
+OK, I give up. I cannot figure out how to flush pending stdio output.
+We won't be flushing handles at all before fork/exec/popen.
EOM
;;
esac
$rm -f try.* try$exe_ext
-: see what type file positions are declared as in the library
-rp="What is the type for file position used by fsetpos()?"
-set fpos_t fpostype long stdio.h sys/types.h
-eval $typedef_ask
+: Store the full pathname to the ar program for use in the C program
+: Respect a hint or command line value for full_ar.
+case "$full_ar" in
+'') full_ar=$ar ;;
+esac
+
+: Store the full pathname to the sed program for use in the C program
+full_sed=$sed
+
+: see what type gids are declared as in the kernel
+echo " "
+echo "Looking for the type for group ids returned by getgid()."
+set gid_t gidtype xxx stdio.h sys/types.h
+eval $typedef
+case "$gidtype" in
+xxx)
+ xxx=`./findhdr sys/user.h`
+ set `grep 'groups\[NGROUPS\];' "$xxx" 2>/dev/null` unsigned short
+ case $1 in
+ unsigned) dflt="$1 $2" ;;
+ *) dflt="$1" ;;
+ esac
+ ;;
+*) dflt="$gidtype";;
+esac
+case "$gidtype" in
+gid_t) echo "gid_t found." ;;
+*) rp="What is the type for group ids returned by getgid()?"
+ . ./myread
+ gidtype="$ans"
+ ;;
+esac
+
+echo " "
+case "$gidtype" in
+*_t) zzz="$gidtype" ;;
+*) zzz="gid" ;;
+esac
+echo "Checking the size of $zzz..." >&4
+cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ printf("%d\n", (int)sizeof($gidtype));
+ exit(0);
+}
+EOCP
+set try
+if eval $compile_ok; then
+ yyy=`./try`
+ case "$yyy" in
+ '') gidsize=4
+ echo "(I can't execute the test program--guessing $gidsize.)" >&4
+ ;;
+ *) gidsize=$yyy
+ echo "Your $zzz is $gidsize bytes long."
+ ;;
+ esac
+else
+ gidsize=4
+ echo "(I can't compile the test program--guessing $gidsize.)" >&4
+fi
+
+
+echo " "
+case "$gidtype" in
+*_t) zzz="$gidtype" ;;
+*) zzz="gid" ;;
+esac
+echo "Checking the sign of $zzz..." >&4
+cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ $gidtype foo = -1;
+ if (foo < 0)
+ printf("-1\n");
+ else
+ printf("1\n");
+}
+EOCP
+set try
+if eval $compile; then
+ yyy=`./try`
+ case "$yyy" in
+ '') gidsign=1
+ echo "(I can't execute the test program--guessing unsigned.)" >&4
+ ;;
+ *) gidsign=$yyy
+ case "$gidsign" in
+ 1) echo "Your $zzz is unsigned." ;;
+ -1) echo "Your $zzz is signed." ;;
+ esac
+ ;;
+ esac
+else
+ gidsign=1
+ echo "(I can't compile the test program--guessing unsigned.)" >&4
+fi
+
+
+echo " "
+
+if $test X"$quadtype" != X; then
+
+echo "Checking how to print 64-bit integers..." >&4
+
+if $test X"$sPRId64" = X -a X"$quadtype" = Xint; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ int q = 12345678901;
+ printf("%ld\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64='"d"'; sPRIi64='"i"'; sPRIu64='"u"';
+ sPRIo64='"o"'; sPRIx64='"x"'; sPRIX64='"X"';
+ echo "We will use %d."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRId64" = X -a X"$quadtype" = Xlong; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long q = 12345678901;
+ printf("%ld\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64='"ld"'; sPRIi64='"li"'; sPRIu64='"lu"';
+ sPRIo64='"lo"'; sPRIx64='"lx"'; sPRIX64='"lX"';
+ echo "We will use %ld."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRId64" = X -a X"$i_inttypes" = X"$define" -a X"$quadtype" = Xint64_t; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <inttypes.h>
+#include <stdio.h>
+int main() {
+ int64_t q = 12345678901;
+ printf("%" PRId64 "\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64=PRId64; sPRIi64=PRIi64; sPRIu64=PRIu64;
+ sPRIo64=PRIo64; sPRIx64=PRIx64; sPRIX64=PRIX64;
+ echo "We will use the C9X style."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRId64" = X -a X"$quadtype" = X"long long"; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long long q = 12345678901LL; /* AIX cc requires the LL prefix. */
+ printf("%lld\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64='"lld"'; sPRIi64='"lli"'; sPRIu64='"llu"';
+ sPRIo64='"llo"'; sPRIx64='"llx"'; sPRIX64='"llX"';
+ echo "We will use the %lld style."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRId64" = X -a X"$quadtype" != X; then
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ $quadtype q = 12345678901;
+ printf("%Ld\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64='"Ld"'; sPRIi64='"Li"'; sPRIu64='"Lu"';
+ sPRIo64='"Lo"'; sPRIx64='"Lx"'; sPRIX64='"LX"';
+ echo "We will use %Ld."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRId64" = X -a X"$quadtype" != X; then
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ $quadtype q = 12345678901;
+ printf("%qd\n", q);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try$exe_ext`
+ case "$yyy" in
+ 12345678901)
+ sPRId64='"qd"'; sPRIi64='"qi"'; sPRIu64='"qu"';
+ sPRIo64='"qo"'; sPRIx64='"qx"'; sPRIX64='"qX"';
+ echo "We will use %qd."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRId64" = X; then
+ echo "Cannot figure out how to print 64-bit integers." >&4
+fi
+
+$rm -f try try.*
+
+fi
+
+case "$sPRId64" in
+'') d_PRId64="$undef"; d_PRIi64="$undef"; d_PRIu64="$undef";
+ d_PRIo64="$undef"; d_PRIx64="$undef"; d_PRIX64="$undef";
+ ;;
+*) d_PRId64="$define"; d_PRIi64="$define"; d_PRIu64="$define";
+ d_PRIo64="$define"; d_PRIx64="$define"; d_PRIX64="$define";
+ ;;
+esac
+
+
+echo " "
+$echo "Checking the format strings to be used for Perl's internal types..." >&4
-: Store the full pathname to the ar program for use in the C program
-: Respect a hint or command line value for full_ar.
-case "$full_ar" in
-'') full_ar=$ar ;;
+if $test X"$ivsize" = X8; then
+ ivdformat="$sPRId64"
+ uvuformat="$sPRIu64"
+ uvoformat="$sPRIo64"
+ uvxformat="$sPRIx64"
+else
+ if $test X"$ivsize" = X"$longsize"; then
+ ivdformat='"ld"'
+ uvuformat='"lu"'
+ uvoformat='"lo"'
+ uvxformat='"lx"'
+ else
+ if $test X"$ivsize" = X"$intsize"; then
+ ivdformat='"d"'
+ uvuformat='"u"'
+ uvoformat='"o"'
+ uvxformat='"x"'
+ else
+ : far out
+ if $test X"$ivsize" = X"$shortsize"; then
+ ivdformat='"hd"'
+ uvuformat='"hu"'
+ uvoformat='"ho"'
+ uvxformat='"hx"'
+ fi
+ fi
+ fi
+fi
+
+case "$ivdformat" in
+'') echo "$0: Fatal: failed to find format strings, cannot continue." >& 4
+ exit 1
+ ;;
esac
-: Store the full pathname to the sed program for use in the C program
-full_sed=$sed
-: see what type gids are declared as in the kernel
echo " "
-echo "Looking for the type for group ids returned by getgid()."
-set gid_t gidtype xxx stdio.h sys/types.h
-eval $typedef
-case "$gidtype" in
-xxx)
- xxx=`./findhdr sys/user.h`
- set `grep 'groups\[NGROUPS\];' "$xxx" 2>/dev/null` unsigned short
- case $1 in
- unsigned) dflt="$1 $2" ;;
- *) dflt="$1" ;;
- esac
+$echo "Checking the format string to be used for gids..." >&4
+
+case "$gidsign" in
+-1) if $test X"$gidsize" = X"$ivsize"; then
+ gidformat="$ivdformat"
+ else
+ if $test X"$gidsize" = X"$longsize"; then
+ gidformat='"ld"'
+ else
+ if $test X"$gidsize" = X"$intsize"; then
+ gidformat='"d"'
+ else
+ if $test X"$gidsize" = X"$shortsize"; then
+ gidformat='"hd"'
+ fi
+ fi
+ fi
+ fi
;;
-*) dflt="$gidtype";;
-esac
-case "$gidtype" in
-gid_t) echo "gid_t found." ;;
-*) rp="What is the type for group ids returned by getgid()?"
- . ./myread
- gidtype="$ans"
+*) if $test X"$gidsize" = X"$uvsize"; then
+ gidformat="$uvuformat"
+ else
+ if $test X"$gidsize" = X"$longsize"; then
+ gidformat='"lu"'
+ else
+ if $test X"$gidsize" = X"$intsize"; then
+ gidformat='"u"'
+ else
+ if $test X"$gidsize" = X"$shortsize"; then
+ gidformat='"hu"'
+ fi
+ fi
+ fi
+ fi
;;
esac
*) groupstype="$gidtype";;
esac
-: see what type lseek is declared as in the kernel
-rp="What is the type used for lseek's offset on this system?"
-set off_t lseektype long stdio.h sys/types.h
-eval $typedef_ask
-
-echo " "
-$echo $n "Checking to see how big your file offsets are...$c" >&4
-$cat >try.c <<EOCP
-#include <sys/types.h>
-#include <stdio.h>
-int main()
-{
- printf("%d\n", sizeof($lseektype));
-}
-EOCP
-set try
-if eval $compile_ok; then
- lseeksize=`./try`
- $echo " $lseeksize bytes." >&4
-else
- dflt='4'
- echo " "
- echo "(I can't seem to compile the test program. Guessing...)"
- rp="What is the size of your file offsets (in bytes)?"
- . ./myread
- lseeksize="$ans"
-fi
-$rm -f try.c try
-
echo " "
echo "Checking if your $make program sets \$(MAKE)..." >&4
case "$make_set_make" in
set pid_t pidtype int stdio.h sys/types.h
eval $typedef_ask
+: Find earliest binary compatible site_perl subdirectory perl can use.
+case "$bincompat5005" in
+"$define") xs_apiversion='5.005' ;;
+*) xs_apiversion=$version ;; # The current site_perl version.
+esac
+: Find earliest pure perl site_perl subdirectory perl can use.
+: The versioned directories started at 5.005.
+pm_apiversion='5.005'
+
: check for length of pointer
echo " "
case "$ptrsize" in
'')
- $echo $n "Checking to see how big your pointers are...$c" >&4
+ echo "Checking to see how big your pointers are..." >&4
if test "$voidflags" -gt 7; then
echo '#define VOID_PTR char *' > try.c
else
#include <stdio.h>
int main()
{
- printf("%d\n", sizeof(VOID_PTR));
- exit(0);
+ printf("%d\n", (int)sizeof(VOID_PTR));
+ exit(0);
}
EOCP
set try
if eval $compile_ok; then
ptrsize=`./try`
- $echo " $ptrsize bytes." >&4
+ echo "Your pointers are $ptrsize bytes long."
else
dflt='4'
echo "(I can't seem to compile the test program. Guessing...)" >&4
case "$selecttype" in
'') case "$d_select" in
$define)
+ echo " "
$cat <<EOM
Checking to see what type of arguments are accepted by select().
EOM
: Remove SIGSTKSIZE used by Linux.
: Remove SIGSTKSZ used by Posix.
: Remove SIGTYP void lines used by OS2.
-xxx=`echo '#include <signal.h>' |
+: Some cpps, like os390, dont give the file name anywhere
+if [ "X$fieldn" = X ]; then
+ : Just make some guesses. We check them later.
+ xxx='/usr/include/signal.h /usr/include/sys/signal.h'
+else
+ xxx=`echo '#include <signal.h>' |
$cppstdin $cppminus $cppflags 2>/dev/null |
$grep '^[ ]*#.*include' |
$awk "{print \\$$fieldn}" | $sed 's!"!!g' | $sort | $uniq`
+fi
: Check this list of files to be sure we have parsed the cpp output ok.
: This will also avoid potentially non-existent files, such
: as ../foo/bar.h
print substr($3, 4, 20)
}' $xxxfiles`
: Append some common names just in case the awk scan failed.
-xxx="$xxx ABRT ALRM BUS CHLD CLD CONT DIL EMT FPE HUP ILL INT IO IOT KILL"
-xxx="$xxx LOST PHONE PIPE POLL PROF PWR QUIT SEGV STKFLT STOP SYS TERM TRAP"
-xxx="$xxx TSTP TTIN TTOU URG USR1 USR2 USR3 USR4 VTALRM"
-xxx="$xxx WINCH WIND WINDOW XCPU XFSZ"
+xxx="$xxx ABRT ALRM BUS CANCEL CHLD CLD CONT DIL EMT FPE"
+xxx="$xxx FREEZE HUP ILL INT IO IOT KILL LOST LWP PHONE"
+xxx="$xxx PIPE POLL PROF PWR QUIT RTMAX RTMIN SEGV STKFLT STOP"
+xxx="$xxx SYS TERM THAW TRAP TSTP TTIN TTOU URG USR1 USR2"
+xxx="$xxx USR3 USR4 VTALRM WAITING WINCH WIND WINDOW XCPU XFSZ"
+
: generate a few handy files for later
$cat > signal.c <<'EOCP'
#include <sys/types.h>
}
END {
printf "#endif /* JUST_NSIG */\n";
- printf "}\n";
+ printf "exit(0);\n}\n";
}
' >>signal.c
$cat >signal.awk <<'EOP'
}'
$rm -f signal signal.c signal.awk signal.lst signal_cmd
+echo " "
+case "$sizetype" in
+*_t) zzz="$sizetype" ;;
+*) zzz="filesize" ;;
+esac
+echo "Checking the size of $zzz..." >&4
+cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ printf("%d\n", (int)sizeof($sizetype));
+ exit(0);
+}
+EOCP
+set try
+if eval $compile_ok; then
+ yyy=`./try`
+ case "$yyy" in
+ '') sizesize=4
+ echo "(I can't execute the test program--guessing $sizesize.)" >&4
+ ;;
+ *) sizesize=$yyy
+ echo "Your $zzz size is $sizesize bytes."
+ ;;
+ esac
+else
+ sizesize=4
+ echo "(I can't compile the test program--guessing $sizesize.)" >&4
+fi
+
+
+: check for socklen_t
+echo " "
+echo "Checking to see if you have socklen_t..." >&4
+$cat >try.c <<EOCP
+#include <sys/types.h>
+#$d_socket HAS_SOCKET
+#ifdef HAS_SOCKET
+#include <sys/socket.h>
+#endif
+int main() { socklen_t x = 16; }
+EOCP
+set try
+if eval $compile; then
+ val="$define"
+ echo "You have socklen_t."
+else
+ val="$undef"
+ echo "You do not have socklen_t."
+ case "$sizetype" in
+ size_t) echo "(You do have size_t, that might work. Some people are happy with just an int.)" ;;
+ esac
+fi
+$rm -f try try.*
+set d_socklen_t
+eval $setvar
+
+: check for type of the size argument to socket calls
+case "$d_socket" in
+"$define")
+ $cat <<EOM
+
+Checking to see what type is the last argument of accept().
+EOM
+ hdrs="$define sys/types.h $d_socket sys/socket.h"
+ yyy=''
+ case "$d_socklen_t" in
+ "$define") yyy="$yyy socklen_t"
+ esac
+ yyy="$yyy $sizetype int long"
+ for xxx in $yyy; do
+ case "$socksizetype" in
+ '') try="extern int accept(int, struct sockaddr *, $xxx *);"
+ if ./protochk "$try" $hdrs; then
+ echo "Your system accepts '$xxx *' for the last argument of accept()."
+ socksizetype="$xxx"
+ fi
+ ;;
+ esac
+ done
+: In case none of those worked, prompt the user.
+ case "$socksizetype" in
+ '') rp='What is the type for socket address structure sizes?'
+ dflt='int'
+ . ./myread
+ socksizetype=$ans
+ ;;
+ esac
+ ;;
+*) : no sockets, so pick relatively harmless defaults
+ socksizetype='char *'
+ ;;
+esac
+
: see what type is used for signed size_t
set ssize_t ssizetype int stdio.h sys/types.h
eval $typedef
;;
esac
+echo " "
+case "$uidtype" in
+*_t) zzz="$uidtype" ;;
+*) zzz="uid" ;;
+esac
+echo "Checking the size of $zzz..." >&4
+cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ printf("%d\n", (int)sizeof($uidtype));
+ exit(0);
+}
+EOCP
+set try
+if eval $compile_ok; then
+ yyy=`./try`
+ case "$yyy" in
+ '') uidsize=4
+ echo "(I can't execute the test program--guessing $uidsize.)" >&4
+ ;;
+ *) uidsize=$yyy
+ echo "Your $zzz is $uidsize bytes long."
+ ;;
+ esac
+else
+ uidsize=4
+ echo "(I can't compile the test program--guessing $uidsize.)" >&4
+fi
+
+echo " "
+case "$uidtype" in
+*_t) zzz="$uidtype" ;;
+*) zzz="uid" ;;
+esac
+echo "Checking the sign of $zzz..." >&4
+cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ $uidtype foo = -1;
+ if (foo < 0)
+ printf("-1\n");
+ else
+ printf("1\n");
+}
+EOCP
+set try
+if eval $compile; then
+ yyy=`./try`
+ case "$yyy" in
+ '') uidsign=1
+ echo "(I can't execute the test program--guessing unsigned.)" >&4
+ ;;
+ *) uidsign=$yyy
+ case "$uidsign" in
+ 1) echo "Your $zzz is unsigned." ;;
+ -1) echo "Your $zzz is signed." ;;
+ esac
+ ;;
+ esac
+else
+ uidsign=1
+ echo "(I can't compile the test program--guessing unsigned.)" >&4
+fi
+
+
+
+echo " "
+$echo "Checking the format string to be used for uids..." >&4
+
+case "$uidsign" in
+-1) if $test X"$uidsize" = X"$ivsize"; then
+ uidformat="$ivdformat"
+ else
+ if $test X"$uidsize" = X"$longsize"; then
+ uidformat='"ld"'
+ else
+ if $test X"$uidsize" = X"$intsize"; then
+ uidformat='"d"'
+ else
+ if $test X"$uidsize" = X"$shortsize"; then
+ uidformat='"hd"'
+ fi
+ fi
+ fi
+ fi
+ ;;
+*) if $test X"$uidsize" = X"$uvsize"; then
+ uidformat="$uvuformat"
+ else
+ if $test X"$uidsize" = X"$longsize"; then
+ uidformat='"lu"'
+ else
+ if $test X"$uidsize" = X"$intsize"; then
+ uidformat='"u"'
+ else
+ if $test X"$uidsize" = X"$shortsize"; then
+ uidformat='"hu"'
+ fi
+ fi
+ fi
+ fi
+ ;;
+esac
+
: see if dbm.h is available
: see if dbmclose exists
set dbmclose d_dbmclose
set i_fcntl
eval $setvar
+: see if this is a iconv.h system
+set iconv.h i_iconv
+eval $inhdr
+
+: see if this is a ieeefp.h system
+set ieeefp.h i_ieeefp
+eval $inhdr
+
: see if locale.h is available
set locale.h i_locale
eval $inhdr
set poll.h i_poll
eval $inhdr
-: get C preprocessor symbols handy
echo " "
-$echo $n "Hmm... $c"
-echo $al | $tr ' ' $trnl >Cppsym.know
-$cat <<EOSS >Cppsym
+$echo "Guessing which symbols your C compiler and preprocessor define..." >&4
+$cat <<'EOSH' > Cppsym.know
+a29k ABI64 aegis AES_SOURCE AIX AIX32 AIX370
+AIX41 AIX42 AIX43 AIX_SOURCE aixpc ALL_SOURCE
+alliant alpha am29000 AM29000 amiga AMIGAOS AMIX
+ansi ANSI_C_SOURCE apollo ardent atarist att386 att3b BeOS
+BIG_ENDIAN BIT_MSF bsd BSD bsd43 bsd4_2 bsd4_3 BSD4_3 bsd4_4
+BSD_4_3 BSD_4_4 BSD_NET2 BSD_TIME BSD_TYPES BSDCOMPAT bsdi
+bull c cadmus clipper CMU COFF COMPILER_VERSION
+concurrent convex cpu cray CRAY CRAYMPP ctix CX_UX
+CYGWIN DGUX DGUX_SOURCE DJGPP dmert DOLPHIN DPX2 DSO
+Dynix DynixPTX ELF encore EPI EXTENSIONS FILE_OFFSET_BITS
+FreeBSD GCC_NEW_VARARGS gcos gcx gimpel
+GNU_SOURCE GNUC GNUC_MINOR GO32 gould GOULD_PN
+H3050R H3050RX hbullx20 hcx host_mips
+hp200 hp300 hp700 HP700 hp800 hp9000
+hp9000s200 hp9000s300 hp9000s400 hp9000s500
+hp9000s700 hp9000s800 hp9k8 hp_osf hppa hpux HPUX_SOURCE
+i186 i286 i386 i486 i586 i686 i8086 i80960 i860 I960
+iAPX286 ibm ibm032 ibmesa IBMR2 ibmrt ILP32 ILP64
+INLINE_INTRINSICS INTRINSICS INT64 interdata is68k ksr1
+LANGUAGE_C LARGE_FILE_API LARGEFILE64_SOURCE
+LARGEFILE_SOURCE LFS64_LARGEFILE LFS_LARGEFILE
+Linux LITTLE_ENDIAN LONG64 LONG_DOUBLE LONG_LONG
+LONGDOUBLE LONGLONG LP64 luna luna88k Lynx
+M68000 m68k m88100 m88k M88KBCS_TARGET M_COFF
+M_I186 M_I286 M_I386 M_I8086 M_I86 M_I86SM M_SYS3
+M_SYS5 M_SYSIII M_SYSV M_UNIX M_XENIX MACH machine MachTen
+MATH_HAS_NO_SIDE_EFFECTS
+mc300 mc500 mc68000 mc68010 mc68020 mc68030 mc68040
+mc68060 mc68k mc68k32 mc700 mc88000 mc88100 merlin
+mert MiNT mips MIPS_FPSET MIPS_ISA MIPS_SIM MIPS_SZINT
+MIPS_SZLONG MIPS_SZPTR MIPSEB MIPSEL MODERN_C motorola
+mpeix MSDOS MTXINU MULTIMAX mvs MVS n16 ncl_el ncl_mr
+NetBSD news1500 news1700 news1800 news1900 news3700
+news700 news800 news900 NeXT NLS ns16000 ns32000
+ns32016 ns32332 ns32k nsc32000
+OCS88 OEMVS OpenBSD os OS2 OS390 osf OSF1 OSF_SOURCE
+pa_risc PA_RISC1_1 PA_RISC2_0 PARAGON parisc
+pc532 pdp11 PGC PIC plexus PORTAR posix
+POSIX1B_SOURCE POSIX2_SOURCE POSIX4_SOURCE
+POSIX_C_SOURCE POSIX_SOURCE POWER
+PROTOTYPES PWB pyr QNX R3000 REENTRANT RES Rhapsody RISC6000
+riscix riscos RT scs SCO sequent sgi SGI_SOURCE sinix
+SIZE_INT SIZE_LONG SIZE_PTR SOCKET_SOURCE SOCKETS_SOURCE
+sony sony_news sonyrisc sparc sparclite spectrum
+stardent stdc STDC_EXT stratos sun sun3 sun386
+Sun386i svr3 svr4 SVR4_2 SVR4_SOURCE svr5
+SX system SYSTYPE_BSD SYSTYPE_BSD43 SYSTYPE_BSD44
+SYSTYPE_SVR4 SYSTYPE_SVR5 SYSTYPE_SYSV SYSV SYSV3 SYSV4 SYSV5
+sysV68 sysV88 Tek4132 Tek4300 titan
+tower tower32 tower32_200 tower32_600 tower32_700
+tower32_800 tower32_850 tss
+u370 u3b u3b2 u3b20 u3b200 u3b20d u3b5
+ultrix UMAXV UnicomPBB UnicomPBD UNICOS UNICOSMK
+unix UNIX95 UNIX99 unixpc unos USGr4 USGr4_2
+Utek UTek UTS UWIN uxpm uxps vax venix VMESA vms xenix Xenix286
+XOPEN_SOURCE XOPEN_SOURCE_EXTENDED XPG2 XPG2_EXTENDED
+XPG3 XPG3_EXTENDED XPG4 XPG4_EXTENDED
+z8000
+EOSH
+# Maybe put other stuff here too.
+cat <<EOSH >>Cppsym.know
+$osname
+EOSH
+./tr '[a-z]' '[A-Z]' < Cppsym.know > Cppsym.a
+./tr '[A-Z]' '[a-z]' < Cppsym.know > Cppsym.b
+$cat Cppsym.a Cppsym.b | $tr ' ' $trnl | sort | uniq > Cppsym.know
+$rm -f Cppsym.a Cppsym.b
+cat <<EOSH > Cppsym
$startsh
-case "\$1" in
--l) list=true
- shift
- ;;
-esac
-unknown=''
-case "\$list\$#" in
-1|2)
- for sym do
- if $contains "^\$1$" Cppsym.true >/dev/null 2>&1; then
- exit 0
- elif $contains "^\$1$" Cppsym.know >/dev/null 2>&1; then
- :
- else
- unknown="\$unknown \$sym"
- fi
- done
- set X \$unknown
- shift
- ;;
-esac
-case \$# in
-0) exit 1;;
-esac
-echo \$* | $tr ' ' '$trnl' | $sed -e 's/\(.*\)/\\
-#ifdef \1\\
-exit 0; _ _ _ _\1\\ \1\\
-#endif\\
-/' >Cppsym\$\$
-echo "exit 1; _ _ _" >>Cppsym\$\$
-$cppstdin $cppminus <Cppsym\$\$ | $grep '^exit [01]; _ _' >Cppsym2\$\$
-case "\$list" in
-true) $awk 'NF > 5 {print substr(\$6,2,100)}' <Cppsym2\$\$ ;;
-*)
- sh Cppsym2\$\$
- status=\$?
- ;;
-esac
-$rm -f Cppsym\$\$ Cppsym2\$\$
-exit \$status
-EOSS
+if $test \$# -gt 0; then
+ echo \$* | $tr " " "$trnl" | ./Cppsym.try > Cppsym.got
+ if $test -s Cppsym.got; then
+ $rm -f Cppsym.got
+ exit 0
+ fi
+ $rm -f Cppsym.got
+ exit 1
+else
+ $tr " " "$trnl" | ./Cppsym.try
+ exit 0
+fi
+EOSH
chmod +x Cppsym
$eunicefix Cppsym
-./Cppsym -l $al | $sort | $grep -v '^$' >Cppsym.true
-
+cat <<EOSH > Cppsym.try
+$startsh
+cat <<'EOCP' > try.c
+#include <stdio.h>
+int main() {
+EOCP
+$awk \\
+EOSH
+cat <<'EOSH' >> Cppsym.try
+'length($1) > 0 {
+ printf "#ifdef %s\n#if %s+0\nprintf(\"%s=%%ld\\n\", %s);\n#else\nprintf(\"%s\\n\");\n#endif\n#endif\n", $1, $1, $1, $1, $1
+ printf "#ifdef _%s\n#if _%s+0\nprintf(\"_%s=%%ld\\n\", _%s);\n#else\nprintf(\"_%s\\n\");\n#endif\n#endif\n", $1, $1, $1, $1, $1
+ printf "#ifdef __%s\n#if __%s+0\nprintf(\"__%s=%%ld\\n\", __%s);\n#else\nprintf(\"__%s\\n\");\n#endif\n#endif\n", $1, $1, $1, $1, $1
+ printf "#ifdef __%s__\n#if __%s__+0\nprintf(\"__%s__=%%ld\\n\", __%s__);\n#else\nprintf(\"__%s__\\n\");\n#endif\n#endif\n", $1, $1, $1, $1, $1
+}' >> try.c
+echo '}' >> try.c
+EOSH
+cat <<EOSH >> Cppsym.try
+ccflags="$ccflags"
+case "$osname-$gccversion" in
+irix-) ccflags="\$ccflags -woff 1178" ;;
+esac
+$cc $optimize \$ccflags $ldflags -o try try.c $libs && ./try$exe_ext
+EOSH
+chmod +x Cppsym.try
+$eunicefix Cppsym.try
+./Cppsym < Cppsym.know > Cppsym.true
: now check the C compiler for additional symbols
postprocess_cc_v=''
case "$osname" in
$awk '/\=/ { print $0; next }
{ print $0"=1" }' ccsym.raw >ccsym.list
-$awk '{ print $0"=1" }' Cppsym.true >ccsym.true
+$awk '/\=/ { print $0; next }
+ { print $0"=1" }' Cppsym.true >ccsym.true
$comm -13 ccsym.true ccsym.list >ccsym.own
$comm -12 ccsym.true ccsym.list >ccsym.com
$comm -23 ccsym.true ccsym.list >ccsym.cpp
set stddef.h i_stddef
eval $inhdr
+: see if this is a sunmath.h system
+set sunmath.h i_sunmath
+eval $inhdr
+
: see if sys/access.h is available
set sys/access.h i_sysaccess
eval $inhdr
set i_sysioctl
eval $setvar
+
+: see if this is a syslog.h system
+set syslog.h i_syslog
+eval $inhdr
+
+
+: see if this is a sys/mode.h system
+set sys/mode.h i_sysmode
+eval $inhdr
+
: see if sys/resource.h has to be included
set sys/resource.h i_sysresrc
eval $inhdr
set sys/statvfs.h i_sysstatvfs
eval $inhdr
+: see if this is a sys/uio.h system
+set sys/uio.h i_sysuio
+eval $inhdr
+
: see if this is a sys/un.h system
set sys/un.h i_sysun
eval $inhdr
+
+: see if this is a sys/utsname.h system
+set sys/utsname.h i_sysutsname
+eval $inhdr
+
: see if this is a syswait system
set sys/wait.h i_syswait
eval $inhdr
+: see if this is a ustat.h system
+set ustat.h i_ustat
+eval $inhdr
+
: see if this is an utime system
set utime.h i_utime
eval $inhdr
eval $find_extensions;
cd ..;
shift;
- fi
+ fi;
fi
;;
- esac
+ esac;
done'
tdir=`pwd`
cd $rsrc/ext
-set
+set X
shift
eval $find_extensions
set X $nonxs_extensions
;;
NDBM_File|ndbm_fil)
case "$i_ndbm" in
- $define) avail_ext="$avail_ext $xxx" ;;
+ $define)
+ case "$osname-$use64bitint" in
+ hpux-define)
+ case "$libs" in
+ *-lndbm*) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ *) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
esac
;;
ODBM_File|odbm_fil)
case "${i_dbm}${i_rpcsvcdbm}" in
- *"${define}"*) avail_ext="$avail_ext $xxx" ;;
+ *"${define}"*)
+ case "$osname-$use64bitint" in
+ hpux-define)
+ case "$libs" in
+ *-ldbm*) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ *) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
esac
;;
POSIX|posix)
echo " "
echo "Stripping down executable paths..." >&4
for file in $loclist $trylist; do
- if test X$file != Xln -a X$file != Xar -o X$osname != Xos2; then
- eval $file="\$file"
- fi
+ eval temp=\$$file
+ eval $file=`basename $temp`
done
;;
esac
alignbytes='$alignbytes'
ansi2knr='$ansi2knr'
aphostname='$aphostname'
-apiversion='$apiversion'
+api_revision='$api_revision'
+api_subversion='$api_subversion'
+api_version='$api_version'
+api_versionstring='$api_versionstring'
ar='$ar'
archlib='$archlib'
archlibexp='$archlibexp'
baserev='$baserev'
bash='$bash'
bin='$bin'
+bincompat5005='$bincompat5005'
binexp='$binexp'
bison='$bison'
byacc='$byacc'
cf_by='$cf_by'
cf_email='$cf_email'
cf_time='$cf_time'
+charsize='$charsize'
chgrp='$chgrp'
chmod='$chmod'
chown='$chown'
cryptlib='$cryptlib'
csh='$csh'
d_Gconvert='$d_Gconvert'
+d_PRIEldbl='$d_PRIEldbl'
+d_PRIFldbl='$d_PRIFldbl'
+d_PRIGldbl='$d_PRIGldbl'
+d_PRIX64='$d_PRIX64'
+d_PRId64='$d_PRId64'
+d_PRIeldbl='$d_PRIeldbl'
+d_PRIfldbl='$d_PRIfldbl'
+d_PRIgldbl='$d_PRIgldbl'
+d_PRIi64='$d_PRIi64'
+d_PRIo64='$d_PRIo64'
+d_PRIu64='$d_PRIu64'
+d_PRIx64='$d_PRIx64'
d_access='$d_access'
d_accessx='$d_accessx'
d_alarm='$d_alarm'
d_archlib='$d_archlib'
+d_atolf='$d_atolf'
+d_atoll='$d_atoll'
d_attribut='$d_attribut'
d_bcmp='$d_bcmp'
d_bcopy='$d_bcopy'
+d_bincompat5005='$d_bincompat5005'
d_bsd='$d_bsd'
d_bsdgetpgrp='$d_bsdgetpgrp'
d_bsdsetpgrp='$d_bsdsetpgrp'
d_chroot='$d_chroot'
d_chsize='$d_chsize'
d_closedir='$d_closedir'
-d_cmsghdr_s='$d_cmsghdr_s'
d_const='$d_const'
d_crypt='$d_crypt'
d_csh='$d_csh'
d_cuserid='$d_cuserid'
d_dbl_dig='$d_dbl_dig'
-d_dbmclose64='$d_dbmclose64'
-d_dbminit64='$d_dbminit64'
-d_delete64='$d_delete64'
d_difftime='$d_difftime'
-d_dirent64_s='$d_dirent64_s'
d_dirnamlen='$d_dirnamlen'
d_dlerror='$d_dlerror'
d_dlopen='$d_dlopen'
d_fd_macros='$d_fd_macros'
d_fd_set='$d_fd_set'
d_fds_bits='$d_fds_bits'
-d_fetch64='$d_fetch64'
-d_fgetpos64='$d_fgetpos64'
d_fgetpos='$d_fgetpos'
-d_firstkey64='$d_firstkey64'
d_flexfnam='$d_flexfnam'
-d_flock64_s='$d_flock64_s'
d_flock='$d_flock'
-d_fopen64='$d_fopen64'
d_fork='$d_fork'
d_fpathconf='$d_fpathconf'
-d_freopen64='$d_freopen64'
-d_fseek64='$d_fseek64'
-d_fseeko64='$d_fseeko64'
+d_fpos64_t='$d_fpos64_t'
+d_fs_data_s='$d_fs_data_s'
d_fseeko='$d_fseeko'
-d_fsetpos64='$d_fsetpos64'
d_fsetpos='$d_fsetpos'
-d_fstat64='$d_fstat64'
d_fstatfs='$d_fstatfs'
d_fstatvfs='$d_fstatvfs'
-d_ftell64='$d_ftell64'
-d_ftello64='$d_ftello64'
d_ftello='$d_ftello'
d_ftime='$d_ftime'
-d_ftruncate64='$d_ftruncate64'
+d_getcwd='$d_getcwd'
+d_getfsstat='$d_getfsstat'
d_getgrent='$d_getgrent'
d_getgrps='$d_getgrps'
d_gethbyaddr='$d_gethbyaddr'
d_gethname='$d_gethname'
d_gethostprotos='$d_gethostprotos'
d_getlogin='$d_getlogin'
+d_getmnt='$d_getmnt'
d_getmntent='$d_getmntent'
d_getnbyaddr='$d_getnbyaddr'
d_getnbyname='$d_getnbyname'
d_grpasswd='$d_grpasswd'
d_hasmntopt='$d_hasmntopt'
d_htonl='$d_htonl'
+d_iconv='$d_iconv'
d_index='$d_index'
d_inetaton='$d_inetaton'
-d_ino64_t='$d_ino64_t'
-d_int64t='$d_int64t'
-d_iovec_s='$d_iovec_s'
+d_int64_t='$d_int64_t'
d_isascii='$d_isascii'
d_killpg='$d_killpg'
d_lchown='$d_lchown'
+d_ldbl_dig='$d_ldbl_dig'
d_link='$d_link'
-d_llseek='$d_llseek'
d_locconv='$d_locconv'
-d_lockf64='$d_lockf64'
d_lockf='$d_lockf'
d_longdbl='$d_longdbl'
d_longlong='$d_longlong'
-d_lseek64='$d_lseek64'
-d_lstat64='$d_lstat64'
+d_lseekproto='$d_lseekproto'
d_lstat='$d_lstat'
d_madvise='$d_madvise'
d_mblen='$d_mblen'
d_memmove='$d_memmove'
d_memset='$d_memset'
d_mkdir='$d_mkdir'
+d_mkdtemp='$d_mkdtemp'
d_mkfifo='$d_mkfifo'
+d_mkstemp='$d_mkstemp'
+d_mkstemps='$d_mkstemps'
d_mktime='$d_mktime'
d_mmap='$d_mmap'
d_mprotect='$d_mprotect'
d_msg_proxy='$d_msg_proxy'
d_msgctl='$d_msgctl'
d_msgget='$d_msgget'
-d_msghdr_s='$d_msghdr_s'
d_msgrcv='$d_msgrcv'
d_msgsnd='$d_msgsnd'
d_msync='$d_msync'
d_munmap='$d_munmap'
d_mymalloc='$d_mymalloc'
-d_nextkey64='$d_nextkey64'
d_nice='$d_nice'
+d_nv_preserves_uv='$d_nv_preserves_uv'
d_off64_t='$d_off64_t'
-d_offset_t='$d_offset_t'
d_old_pthread_create_joinable='$d_old_pthread_create_joinable'
d_oldpthreads='$d_oldpthreads'
d_oldsock='$d_oldsock'
d_open3='$d_open3'
-d_open64='$d_open64'
-d_opendir64='$d_opendir64'
d_pathconf='$d_pathconf'
d_pause='$d_pause'
d_phostname='$d_phostname'
d_pwgecos='$d_pwgecos'
d_pwpasswd='$d_pwpasswd'
d_pwquota='$d_pwquota'
-d_readdir64='$d_readdir64'
+d_qgcvt='$d_qgcvt'
+d_quad='$d_quad'
d_readdir='$d_readdir'
d_readlink='$d_readlink'
-d_readv='$d_readv'
-d_recvmsg='$d_recvmsg'
d_rename='$d_rename'
d_rewinddir='$d_rewinddir'
d_rmdir='$d_rmdir'
d_sanemcmp='$d_sanemcmp'
d_sched_yield='$d_sched_yield'
d_scm_rights='$d_scm_rights'
-d_seekdir64='$d_seekdir64'
d_seekdir='$d_seekdir'
d_select='$d_select'
d_sem='$d_sem'
d_semctl_semun='$d_semctl_semun'
d_semget='$d_semget'
d_semop='$d_semop'
-d_sendmsg='$d_sendmsg'
d_setegid='$d_setegid'
d_seteuid='$d_seteuid'
d_setgrent='$d_setgrent'
d_sigaction='$d_sigaction'
d_sigsetjmp='$d_sigsetjmp'
d_socket='$d_socket'
+d_socklen_t='$d_socklen_t'
d_sockpair='$d_sockpair'
-d_stat64='$d_stat64'
+d_sqrtl='$d_sqrtl'
d_statblks='$d_statblks'
-d_statfs='$d_statfs'
-d_statfsflags='$d_statfsflags'
+d_statfs_f_flags='$d_statfs_f_flags'
+d_statfs_s='$d_statfs_s'
d_statvfs='$d_statvfs'
d_stdio_cnt_lval='$d_stdio_cnt_lval'
d_stdio_ptr_lval='$d_stdio_ptr_lval'
d_stdio_stream_array='$d_stdio_stream_array'
d_stdiobase='$d_stdiobase'
d_stdstdio='$d_stdstdio'
-d_store64='$d_store64'
d_strchr='$d_strchr'
d_strcoll='$d_strcoll'
d_strctcpy='$d_strctcpy'
d_strerror='$d_strerror'
d_strtod='$d_strtod'
d_strtol='$d_strtol'
+d_strtold='$d_strtold'
+d_strtoll='$d_strtoll'
d_strtoul='$d_strtoul'
+d_strtoull='$d_strtoull'
+d_strtouq='$d_strtouq'
d_strxfrm='$d_strxfrm'
d_suidsafe='$d_suidsafe'
d_symlink='$d_symlink'
d_system='$d_system'
d_tcgetpgrp='$d_tcgetpgrp'
d_tcsetpgrp='$d_tcsetpgrp'
-d_telldir64='$d_telldir64'
d_telldir='$d_telldir'
d_telldirproto='$d_telldirproto'
d_time='$d_time'
d_times='$d_times'
-d_tmpfile64='$d_tmpfile64'
-d_truncate64='$d_truncate64'
d_truncate='$d_truncate'
d_tzname='$d_tzname'
d_umask='$d_umask'
d_uname='$d_uname'
d_union_semun='$d_union_semun'
+d_ustat='$d_ustat'
+d_vendorarch='$d_vendorarch'
+d_vendorbin='$d_vendorbin'
+d_vendorlib='$d_vendorlib'
d_vfork='$d_vfork'
d_void_closedir='$d_void_closedir'
d_voidsig='$d_voidsig'
d_waitpid='$d_waitpid'
d_wcstombs='$d_wcstombs'
d_wctomb='$d_wctomb'
-d_writev='$d_writev'
d_xenix='$d_xenix'
date='$date'
db_hashtype='$db_hashtype'
find='$find'
firstmakefile='$firstmakefile'
flex='$flex'
+fpossize='$fpossize'
fpostype='$fpostype'
freetype='$freetype'
full_ar='$full_ar'
full_csh='$full_csh'
full_sed='$full_sed'
gccversion='$gccversion'
+gidformat='$gidformat'
+gidsign='$gidsign'
+gidsize='$gidsize'
gidtype='$gidtype'
glibpth='$glibpth'
grep='$grep'
hint='$hint'
hostcat='$hostcat'
huge='$huge'
+i16size='$i16size'
+i16type='$i16type'
+i32size='$i32size'
+i32type='$i32type'
+i64size='$i64size'
+i64type='$i64type'
+i8size='$i8size'
+i8type='$i8type'
i_arpainet='$i_arpainet'
i_bsdioctl='$i_bsdioctl'
i_db='$i_db'
i_float='$i_float'
i_gdbm='$i_gdbm'
i_grp='$i_grp'
+i_iconv='$i_iconv'
+i_ieeefp='$i_ieeefp'
i_inttypes='$i_inttypes'
i_limits='$i_limits'
i_locale='$i_locale'
i_stddef='$i_stddef'
i_stdlib='$i_stdlib'
i_string='$i_string'
+i_sunmath='$i_sunmath'
i_sysaccess='$i_sysaccess'
i_sysdir='$i_sysdir'
i_sysfile='$i_sysfile'
i_sysfilio='$i_sysfilio'
i_sysin='$i_sysin'
i_sysioctl='$i_sysioctl'
+i_syslog='$i_syslog'
i_sysmman='$i_sysmman'
+i_sysmode='$i_sysmode'
i_sysmount='$i_sysmount'
i_sysndir='$i_sysndir'
i_sysparam='$i_sysparam'
i_sysselct='$i_sysselct'
i_syssockio='$i_syssockio'
i_sysstat='$i_sysstat'
+i_sysstatfs='$i_sysstatfs'
i_sysstatvfs='$i_sysstatvfs'
i_systime='$i_systime'
i_systimek='$i_systimek'
i_systypes='$i_systypes'
i_sysuio='$i_sysuio'
i_sysun='$i_sysun'
+i_sysutsname='$i_sysutsname'
+i_sysvfs='$i_sysvfs'
i_syswait='$i_syswait'
i_termio='$i_termio'
i_termios='$i_termios'
i_time='$i_time'
i_unistd='$i_unistd'
+i_ustat='$i_ustat'
i_utime='$i_utime'
i_values='$i_values'
i_varargs='$i_varargs'
i_varhdr='$i_varhdr'
i_vfork='$i_vfork'
ignore_versioned_solibs='$ignore_versioned_solibs'
+inc_version_list='$inc_version_list'
+inc_version_list_init='$inc_version_list_init'
incpath='$incpath'
inews='$inews'
installarchlib='$installarchlib'
installbin='$installbin'
installman1dir='$installman1dir'
installman3dir='$installman3dir'
+installprefix='$installprefix'
+installprefixexp='$installprefixexp'
installprivlib='$installprivlib'
installscript='$installscript'
installsitearch='$installsitearch'
+installsitebin='$installsitebin'
installsitelib='$installsitelib'
+installstyle='$installstyle'
installusrbinperl='$installusrbinperl'
+installvendorarch='$installvendorarch'
+installvendorbin='$installvendorbin'
+installvendorlib='$installvendorlib'
intsize='$intsize'
+ivdformat='$ivdformat'
+ivsize='$ivsize'
+ivtype='$ivtype'
known_extensions='$known_extensions'
ksh='$ksh'
large='$large'
ld='$ld'
lddlflags='$lddlflags'
ldflags='$ldflags'
+ldlibpthname='$ldlibpthname'
less='$less'
lib_ext='$lib_ext'
libc='$libc'
libperl='$libperl'
libpth='$libpth'
libs='$libs'
+libsdirs='$libsdirs'
+libsfiles='$libsfiles'
+libsfound='$libsfound'
+libspath='$libspath'
libswanted='$libswanted'
line='$line'
lint='$lint'
man3direxp='$man3direxp'
man3ext='$man3ext'
medium='$medium'
-mips='$mips'
mips_type='$mips_type'
mkdir='$mkdir'
mmaptype='$mmaptype'
nm_so_opt='$nm_so_opt'
nonxs_ext='$nonxs_ext'
nroff='$nroff'
+nvsize='$nvsize'
+nvtype='$nvtype'
o_nonblock='$o_nonblock'
obj_ext='$obj_ext'
old_pthread_create_joinable='$old_pthread_create_joinable'
passcat='$passcat'
patchlevel='$patchlevel'
path_sep='$path_sep'
+perl5='$perl5'
perl='$perl'
perladmin='$perladmin'
perlpath='$perlpath'
phostname='$phostname'
pidtype='$pidtype'
plibpth='$plibpth'
+pm_apiversion='$pm_apiversion'
pmake='$pmake'
pr='$pr'
prefix='$prefix'
privlibexp='$privlibexp'
prototype='$prototype'
ptrsize='$ptrsize'
+quadkind='$quadkind'
+quadtype='$quadtype'
randbits='$randbits'
randfunc='$randfunc'
randseedtype='$randseedtype'
ranlib='$ranlib'
rd_nodata='$rd_nodata'
+revision='$revision'
rm='$rm'
rmail='$rmail'
runnm='$runnm'
+sPRIEldbl='$sPRIEldbl'
+sPRIFldbl='$sPRIFldbl'
+sPRIGldbl='$sPRIGldbl'
+sPRIX64='$sPRIX64'
+sPRId64='$sPRId64'
+sPRIeldbl='$sPRIeldbl'
+sPRIfldbl='$sPRIfldbl'
+sPRIgldbl='$sPRIgldbl'
+sPRIi64='$sPRIi64'
+sPRIo64='$sPRIo64'
+sPRIu64='$sPRIu64'
+sPRIx64='$sPRIx64'
sched_yield='$sched_yield'
scriptdir='$scriptdir'
scriptdirexp='$scriptdirexp'
signal_t='$signal_t'
sitearch='$sitearch'
sitearchexp='$sitearchexp'
+sitebin='$sitebin'
+sitebinexp='$sitebinexp'
sitelib='$sitelib'
+sitelib_stem='$sitelib_stem'
sitelibexp='$sitelibexp'
+siteprefix='$siteprefix'
+siteprefixexp='$siteprefixexp'
+sizesize='$sizesize'
sizetype='$sizetype'
sleep='$sleep'
smail='$smail'
so='$so'
sockethdr='$sockethdr'
socketlib='$socketlib'
+socksizetype='$socksizetype'
sort='$sort'
spackage='$spackage'
spitshell='$spitshell'
tr='$tr'
trnl='$trnl'
troff='$troff'
+u16size='$u16size'
+u16type='$u16type'
+u32size='$u32size'
+u32type='$u32type'
+u64size='$u64size'
+u64type='$u64type'
+u8size='$u8size'
+u8type='$u8type'
+uidformat='$uidformat'
+uidsign='$uidsign'
+uidsize='$uidsize'
uidtype='$uidtype'
uname='$uname'
uniq='$uniq'
-use64bits='$use64bits'
+uquadtype='$uquadtype'
+use5005threads='$use5005threads'
+use64bitall='$use64bitall'
+use64bitint='$use64bitint'
usedl='$usedl'
+useithreads='$useithreads'
+uselargefiles='$uselargefiles'
+uselongdouble='$uselongdouble'
+usemorebits='$usemorebits'
usemultiplicity='$usemultiplicity'
usemymalloc='$usemymalloc'
usenm='$usenm'
useshrplib='$useshrplib'
usesocks='$usesocks'
usethreads='$usethreads'
+usevendorprefix='$usevendorprefix'
usevfork='$usevfork'
usrinc='$usrinc'
uuname='$uuname'
+uvoformat='$uvoformat'
+uvsize='$uvsize'
+uvtype='$uvtype'
+uvuformat='$uvuformat'
+uvxformat='$uvxformat'
+vendorarch='$vendorarch'
+vendorarchexp='$vendorarchexp'
+vendorbin='$vendorbin'
+vendorbinexp='$vendorbinexp'
+vendorlib='$vendorlib'
+vendorlib_stem='$vendorlib_stem'
+vendorlibexp='$vendorlibexp'
+vendorprefix='$vendorprefix'
+vendorprefixexp='$vendorprefixexp'
version='$version'
vi='$vi'
voidflags='$voidflags'
xlibpth='$xlibpth'
+xs_apiversion='$xs_apiversion'
zcat='$zcat'
zip='$zip'
EOT
projects / p5sagit/p5-mst-13.2.git / blobdiff