# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Fri Jan 8 10:36:44 EET 1999 [metaconfig 3.0 PL70]
-# (with additional metaconfig patches by jhi@iki.fi)
+# Generated on Sun Jul 25 13:48:34 EET DST 1999 [metaconfig 3.0 PL70]
+# (with additional metaconfig patches by perlbug@perl.com)
cat >/tmp/c1$$ <<EOF
ARGGGHHHH!!!!!
newsh=/usr/bin/bsh
fi
fi
+if test -f /osf_boot -a -f /usr/sbin/setld; then
+ if test X`/usr/bin/uname -s` = XOSF1; then
+ avoidksh="to avoid Digital UNIX' ksh"
+ newsh=/bin/sh
+ unset BIN_SH # if this is 'xpg4' sh will start up ksh
+ fi
+fi
case "$inksh/$needksh" in
/[a-z]*)
ENV=''
test -d UU || mkdir UU
cd UU && rm -f ./*
+ccsymbols=''
+cppccsymbols=''
+cppsymbols=''
dynamic_ext=''
extensions=''
known_extensions=''
vi=''
zcat=''
zip=''
+full_ar=''
full_sed=''
libswanted=''
hint=''
cppminus=''
cpprun=''
cppstdin=''
+crosscompile=''
d_access=''
d_accessx=''
d_alarm=''
d_endpent=''
d_endpwent=''
d_endsent=''
+d_endspent=''
d_fchmod=''
d_fchown=''
d_fcntl=''
d_uname=''
d_gethostprotos=''
d_getlogin=''
+d_getmntent=''
d_getnbyaddr=''
d_getnbyname=''
d_getnent=''
d_getpwent=''
d_getsent=''
d_getservprotos=''
+d_getspent=''
+d_getspnam=''
d_getsbyname=''
d_getsbyport=''
d_gnulibc=''
+d_hasmntopt=''
d_htonl=''
d_inetaton=''
d_isascii=''
d_longlong=''
longlongsize=''
d_lstat=''
+d_madvise=''
d_mblen=''
d_mbstowcs=''
d_mbtowc=''
+d_memchr=''
d_memcmp=''
d_memcpy=''
d_memmove=''
d_mkdir=''
d_mkfifo=''
d_mktime=''
+d_mmap=''
+mmaptype=''
+d_mprotect=''
d_msg=''
d_msgctl=''
d_msgget=''
d_msgrcv=''
d_msgsnd=''
+d_msync=''
+d_munmap=''
d_nice=''
d_open3=''
d_fpathconf=''
d_setruid=''
d_setsent=''
d_setsid=''
+d_setspent=''
d_setvbuf=''
d_sfio=''
usesfio=''
sockethdr=''
socketlib=''
d_statblks=''
+d_fstatfs=''
+d_statfs=''
+d_statfsflags=''
+d_fstatvfs=''
+d_statvfs=''
d_stdio_cnt_lval=''
d_stdio_ptr_lval=''
d_stdiobase=''
d_system=''
d_tcgetpgrp=''
d_tcsetpgrp=''
+d_telldirproto=''
d_time=''
timetype=''
clocktype=''
usedl=''
doublesize=''
ebcdic=''
+fflushNULL=''
+fflushall=''
fpostype=''
gidtype=''
groupstype=''
i_malloc=''
i_math=''
i_memory=''
+i_mntent=''
i_ndbm=''
i_netdb=''
i_neterrno=''
+i_netinettcp=''
i_niin=''
i_sysin=''
i_poll=''
+i_pthread=''
d_pwage=''
d_pwchange=''
d_pwclass=''
d_pwquota=''
i_pwd=''
i_sfio=''
+i_shadow=''
+i_socks=''
i_stddef=''
i_stdlib=''
i_string=''
i_sysfilio=''
i_sysioctl=''
i_syssockio=''
+i_sysmman=''
+i_sysmount=''
i_sysndir=''
i_sysparam=''
i_sysresrc=''
i_syssecrt=''
i_sysselct=''
i_sysstat=''
+i_sysstatvfs=''
i_systimes=''
i_systypes=''
d_iovec_s=''
i_varargs=''
i_varhdr=''
i_vfork=''
+installprefix=''
+installprefixexp=''
+installstyle=''
+installusrbinperl=''
intsize=''
longsize=''
shortsize=''
d_flock64_s=''
d_fstat64=''
d_ftruncate64=''
-d_ino64t=''
+d_ino64_t=''
+d_llseek=''
d_lockf64=''
d_lseek64=''
d_lstat64=''
-d_off64t=''
+d_off64_t=''
+d_offset_t=''
d_open64=''
d_opendir64=''
d_readdir64=''
d_telldir64=''
d_truncate64=''
libc=''
+ldlibpthname=''
libperl=''
shrpenv=''
useshrplib=''
small=''
split=''
modetype=''
+multiarch=''
mydomain=''
myhostname=''
phostname=''
selectminbits=''
selecttype=''
sh=''
+sig_count=''
sig_name=''
sig_name_init=''
sig_num=''
installsitelib=''
sitelib=''
sitelibexp=''
+siteprefix=''
+siteprefixexp=''
sizetype=''
so=''
sharpbang=''
d_ftell64=''
d_ftello64=''
d_tmpfile64=''
+d_stdio_stream_array=''
+stdio_stream_array=''
sysman=''
trnl=''
uidtype=''
runnm=''
usenm=''
useperlio=''
+usesocks=''
d_oldpthreads=''
usethreads=''
incpath=''
fi
i_whoami=''
-: change the next line if compiling for Xenix/286 on Xenix/386
-xlibpth='/usr/lib/386 /lib/386'
-
-: Possible local library directories to search.
-loclibpth="/usr/local/lib /opt/local/lib /usr/gnu/lib"
-loclibpth="$loclibpth /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib"
-
-: general looking path for locating libraries
-glibpth="/shlib /usr/shlib /lib/pa1.1 /usr/lib/large"
-glibpth="$glibpth /lib /usr/lib $xlibpth"
-glibpth="$glibpth /lib/large /usr/lib/small /lib/small"
-glibpth="$glibpth /usr/ccs/lib /usr/ucblib /usr/local/lib"
-
-: Private path used by Configure to find libraries. Its value
-: is prepended to libpth. This variable takes care of special
-: machines, like the mips. Usually, it should be empty.
-plibpth=''
-
: Possible local include directories to search.
: Set locincpth to "" in a hint file to defeat local include searches.
locincpth="/usr/local/include /opt/local/include /usr/gnu/include"
: Extra object files, if any, needed on this platform.
archobjs=''
groupstype=''
+: change the next line if compiling for Xenix/286 on Xenix/386
+xlibpth='/usr/lib/386 /lib/386'
+
+: Possible local library directories to search.
+loclibpth="/usr/local/lib /opt/local/lib /usr/gnu/lib"
+loclibpth="$loclibpth /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib"
+
+: general looking path for locating libraries
+glibpth="/shlib /usr/shlib /lib/pa1.1 /usr/lib/large"
+glibpth="$glibpth /lib /usr/lib $xlibpth"
+glibpth="$glibpth /lib/large /usr/lib/small /lib/small"
+glibpth="$glibpth /usr/ccs/lib /usr/ucblib /usr/local/lib"
+
+: Private path used by Configure to find libraries. Its value
+: is prepended to libpth. This variable takes care of special
+: machines, like the mips. Usually, it should be empty.
+plibpth=''
+
: default library list
libswanted=''
: some systems want to use only the non-versioned libso:s
: set useopcode=false in your hint file to disable the Opcode extension.
useopcode=true
: set usemultiplicity on the Configure command line to enable multiplicity.
+: set usesocks on the Configure command line to enable socks.
: set usethreads on the Configure command line to enable threads.
: List of libraries we want.
: If anyone needs -lnet, put it in a hint file.
libswanted='sfio socket inet nsl nm ndbm gdbm dbm db malloc dl'
-libswanted="$libswanted dld ld sun m c cposix posix ndir dir crypt"
+libswanted="$libswanted dld ld sun m rt c cposix posix"
+libswanted="$libswanted ndir dir crypt sec"
libswanted="$libswanted ucb bsd BSD PW x"
: We probably want to search /usr/shlib before most other libraries.
: This is only used by the lib/ExtUtils/MakeMaker.pm routine extliblist.
$me: Fatal Error: I can't find a Bourne Shell anywhere.
Usually it's in /bin/sh. How did you even get this far?
-Please contact me (Jarkko Hietaniemi) at jhi@iki.fi and
+Please contact me (Perl Maintainers) at perlbug@perl.com and
we'll try to straighten this all out.
EOM
exit 1
: script used to extract .SH files with variable substitutions
cat >extract <<'EOS'
-CONFIG=true
+CONFIGDOTSH=true
echo "Doing variable substitutions on .SH files..."
if test -f $src/MANIFEST; then
set x `awk '{print $1}' <$src/MANIFEST | grep '\.SH$'`
You have the option of continuing the configuration process, despite the
distinct possibility that your kit is damaged, by typing 'y'es. If you
do, don't blame me if something goes wrong. I advise you to type 'n'o
-and contact the author (jhi@iki.fi).
+and contact the author (perlbug@perl.com).
EOM
echo $n "Continue? [n] $c" >&4
Unix system. If despite that it blows up on yours, your best bet is to edit
Configure and run it again. If you can't run Configure for some reason,
you'll have to generate a config.sh file by hand. Whatever problems you
-have, let me (jhi@iki.fi) know how I blew it.
+have, let me (perlbug@perl.com) know how I blew it.
This installation script affects things in two ways:
nm
nroff
pg
-tee
test
uname
zip
(cd $src/hints; ls -C *.sh) | $sed 's/\.sh/ /g' >&4
dflt=''
: Half the following guesses are probably wrong... If you have better
- : tests or hints, please send them to jhi@iki.fi
+ : tests or hints, please send them to perlbug@perl.com
: The metaconfig authors would also appreciate a copy...
$test -f /irix && osname=irix
$test -f /xenix && osname=sco_xenix
[23]100) osname=mips ;;
next*) osname=next ;;
i386*)
- if $test -f /etc/kconfig; then
+ tmp=`/bin/uname -X 2>/dev/null|awk '/3\.2v[45]/{ print $(NF) }'`
+ if $test "$tmp" != "" -a "$3" = "3.2" -a -f '/etc/systemid'; then
+ osname='sco'
+ osvers=$tmp
+ elif $test -f /etc/kconfig; then
osname=isc
- if test "$lns" = "ln -s"; then
+ if test "$lns" = "$ln -s"; then
osvers=4
elif $contains _SYSV3 /usr/include/stdio.h > /dev/null 2>&1 ; then
osvers=3
osvers=2
fi
fi
+ tmp=''
;;
pc*)
if test -n "$DJGPP"; then
esac
: who configured the system
-cf_time=`LC_ALL=C; export LC_ALL; $date 2>&1`
+cf_time=`LC_ALL=C; LANGUAGE=C; export LC_ALL; export LANGUAGE; $date 2>&1`
cf_by=`(logname) 2>/dev/null`
case "$cf_by" in
"")
Perl can be built to take advantage of threads, on some systems.
To do so, Configure must be run with -Dusethreads.
-(See README.threads for details.)
+
+Note that threading is a highly experimental feature, and
+some known race conditions still remain. If you choose to try
+it, be very sure to not actually deploy it for production
+purposes. README.threads has more details, and is required
+reading if you enable threads.
EOM
case "$usethreads" in
-$define|true|[yY]*) dflt='y';;
+$define|true|[yY]*) dflt='y';;
*) dflt='n';;
esac
rp='Build a threading Perl?'
. ./myread
case "$ans" in
-y|Y) val="$define" ;;
+y|Y) val="$define" ;;
*) val="$undef" ;;
esac
set usethreads
eval $setvar
-: Look for a hint-file generated 'call-back-unit'. Now that the
-: user has specified if a threading perl is to be built, we may need
-: to set or change some other defaults.
-if $test -f usethreads.cbu; then
- . ./usethreads.cbu
-fi
+
case "$d_oldpthreads" in
'') : Configure tests would be welcome here. For now, assume undef.
val="$undef" ;;
set d_oldpthreads
eval $setvar
+
+case "$usethreads" in
+"$define"|true|[yY]*)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that a threading perl is to be built,
+: we may need to set or change some other defaults.
+ if $test -f usethreads.cbu; then
+ . ./usethreads.cbu
+ fi
+ case "$osname" in
+ aix|dec_osf|dos_djgpp|freebsd|hpux|irix|linux|next|openbsd|os2|solaris|vmesa)
+ # Known thread-capable platforms.
+ ;;
+ *)
+ cat >&4 <<EOM
+$osname is not known to support threads.
+Please let perlbug@perl.com know how to do that.
+
+Cannot continue, aborting.
+EOM
+ exit 1
+ ;;
+ esac # $osname
+ ;;
+esac # $usethreads
+
cat <<EOM
Perl can be built so that multiple Perl interpreters can coexist
set use64bits
eval $setvar
-archname64=''
+case "$archname64" in
+'') archname64='' ;; # not a typo
+esac
+
+case "$use64bits" in
+"$define"|true|[yY]*)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that a 64 bit perl is to be built,
+: we may need to set or change some other defaults.
+ if $test -f use64bits.cbu; then
+ . ./use64bits.cbu
+ fi
+ case "$osname" in
+ aix|dec_osf|hpux|irix|solaris|unicos)
+ # Known 64-bit capable platforms.
+ ;;
+ *)
+ cat >&4 <<EOM
+$osname is not known to support 64-bit interfaces.
+Please let perlbug@perl.com know how to do that.
+
+Cannot continue, aborting.
+EOM
+ exit 1
+ ;;
+ esac
+ ;;
+esac
: determine the architecture name
echo " "
esac
esac
-: is AFS running?
-echo " "
-case "$afs" in
-$define|true) afs=true ;;
-$undef|false) afs=false ;;
-*) if test -d /afs; then
- afs=true
- else
- afs=false
- fi
- ;;
-esac
-if $afs; then
- echo "AFS may be running... I'll be extra cautious then..." >&4
-else
- echo "AFS does not seem to be running..." >&4
-fi
-
: decide how portable to be. Allow command line overrides.
case "$d_portable" in
"$undef") ;;
esac
$cat <<EOM
-By default, $package will be installed in $dflt/bin, manual
-pages under $dflt/man, etc..., i.e. with $dflt as prefix for
-all installation directories. Typically set to /usr/local, but you
-may choose /usr if you wish to install $package among your system
-binaries. If you wish to have binaries under /bin but manual pages
-under /usr/local/man, that's ok: you will be prompted separately
-for each of the installation directories, the prefix being only used
-to set the defaults.
+By default, $package will be installed in $dflt/bin, manual pages
+under $dflt/man, etc..., i.e. with $dflt as prefix for all
+installation directories. Typically this is something like /usr/local.
+If you wish to have binaries under /usr/bin but other parts of the
+installation under /usr/local, that's ok: you will be prompted
+separately for each of the installation directories, the prefix being
+only used to set the defaults.
EOM
fn=d~
prefix="$ans"
prefixexp="$ansexp"
+: is AFS running?
+echo " "
+case "$afs" in
+$define|true) afs=true ;;
+$undef|false) afs=false ;;
+*) if test -d /afs; then
+ afs=true
+ else
+ afs=false
+ fi
+ ;;
+esac
+if $afs; then
+ echo "AFS may be running... I'll be extra cautious then..." >&4
+else
+ echo "AFS does not seem to be running..." >&4
+fi
+
+: determine installation prefix for where package is to be installed.
+if $afs; then
+$cat <<EOM
+
+Since you are running AFS, I need to distinguish the directory in which
+files will reside from the directory in which they are installed (and from
+which they are presumably copied to the former directory by occult means).
+
+EOM
+ case "$installprefix" in
+ '') dflt=`echo $prefix | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installprefix";;
+ esac
+else
+$cat <<EOM
+
+In some special cases, particularly when building $package for distribution,
+it is convenient to distinguish between the directory in which files should
+be installed from the directory ($prefix) in which they
+will eventually reside. For most users, these two directories are the same.
+
+EOM
+ case "$installprefix" in
+ '') dflt=$prefix ;;
+ *) dflt=$installprefix;;
+ esac
+fi
+fn=d~
+rp='What installation prefix should I use for installing files?'
+. ./getfile
+installprefix="$ans"
+installprefixexp="$ansexp"
+
: set the prefixit variable, to compute a suitable default value
prefixit='case "$3" in
""|none)
echo " "
echo "Getting the current patchlevel..." >&4
if $test -r $rsrc/patchlevel.h;then
- patchlevel=`awk '/define[ ]+PATCHLEVEL/ {print $3}' $rsrc/patchlevel.h`
- subversion=`awk '/define[ ]+SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
+ patchlevel=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
+ subversion=`awk '/define[ ]+PERL_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
else
patchlevel=0
subversion=0
: Figure out perl API version. Perhaps this should be in patchlevel.h
if test "$subversion" -lt 50; then
apiversion=`LC_ALL=C; export LC_ALL; \
+ LANGUAGE=C; export LANGUAGE; \
echo $baserev $patchlevel | \
$awk '{ printf "%.3f\n", $1 + $2/1000.0 }'`
else
apiversion="$version"
fi
+: determine installation style
+: For now, try to deduce it from prefix unless it is already set.
+: Reproduce behavior of 5.005 and earlier, maybe drop that in 5.7.
+case "$installstyle" in
+'') case "$prefix" in
+ *perl*) dflt='lib';;
+ *) dflt='lib/perl5' ;;
+ esac
+ ;;
+*) dflt='lib/perl5' ;;
+esac
+: Probably not worth prompting for this since we prompt for all
+: the directories individually, and the prompt would be too long and
+: confusing anyway.
+installstyle=$dflt
+
: determine where private library files go
: Usual default is /usr/local/lib/perl5/$version.
: Also allow things like /opt/perl/lib/$version, since
: /opt/perl/lib/perl5... would be redundant.
-case "$prefix" in
-*perl*) set dflt privlib lib/$version ;;
-*) set dflt privlib lib/$package/$version ;;
+: The default "style" setting is made in installstyle.U
+case "$installstyle" in
+*lib/perl5*) set dflt privlib lib/$package/$version ;;
+*) set dflt privlib lib/$version ;;
esac
eval $prefixit
$cat <<EOM
fn=d~+
rp='Pathname where the private library files will reside?'
. ./getfile
-if $test "X$privlibexp" != "X$ansexp"; then
- installprivlib=''
-fi
privlib="$ans"
privlibexp="$ansexp"
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-private files reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-
-EOM
- case "$installprivlib" in
- '') dflt=`echo $privlibexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installprivlib";;
- esac
- fn=de~
- rp='Where will private files be installed?'
- . ./getfile
- installprivlib="$ans"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installprivlib=`echo $privlibexp | sed 's#^$prefix#$installprefix#'`
else
installprivlib="$privlibexp"
fi
*) dflt="$archlib"
;;
esac
-cat <<EOM
+$cat <<EOM
$spackage contains architecture-dependent library files. If you are
sharing libraries in a heterogeneous environment, you might store
. ./getfile
archlib="$ans"
archlibexp="$ansexp"
-
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in
-which architecture-dependent library files reside from the directory
-in which they are installed (and from which they are presumably copied
-to the former directory by occult means).
-
-EOM
- case "$installarchlib" in
- '') dflt=`echo $archlibexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installarchlib";;
- esac
- fn=de~
- rp='Where will architecture-dependent library files be installed?'
- . ./getfile
- installarchlib="$ans"
-else
- installarchlib="$archlibexp"
-fi
if $test X"$archlib" = X"$privlib"; then
d_archlib="$undef"
else
d_archlib="$define"
fi
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installarchlib=`echo $archlibexp | sed 's#^$prefix#$installprefix#'`
+else
+ installarchlib="$archlibexp"
+fi
: make some quick guesses about what we are up against
echo " "
case "$models" in
'')
$cat >pdp11.c <<'EOP'
-main() {
+int main() {
#ifdef pdp11
exit(0);
#else
exit(0);
}
EOM
-if $cc -o gccvers gccvers.c >/dev/null 2>&1; then
+if $cc -o gccvers gccvers.c; then
gccversion=`./gccvers`
case "$gccversion" in
'') echo "You are not using GNU cc." ;;
esac
case "$cppstdin" in
-"$wrapper") ;;
+"$wrapper"|'cppstdin') ;;
*) $rm -f $wrapper;;
esac
$rm -f testcpp.c testcpp.out
'') firstmakefile='makefile';;
esac
+cat <<EOM
+
+Perl can be built to use the SOCKS proxy protocol library. To do so,
+Configure must be run with -Dusesocks.
+
+Normally you do not need this and you should answer no.
+
+EOM
+case "$usesocks" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+rp='Build Perl for SOCKS?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set usesocks
+eval $setvar
+
: Looking for optional libraries
echo " "
echo "Checking for optional libraries..." >&4
case "$libswanted" in
'') libswanted='c_s';;
esac
+case "$usesocks" in
+$define)
+ libswanted="$libswanted socks5 socks5_sh"
+ ;;
+esac
for thislib in $libswanted; do
if xxx=`./loc lib$thislib.$so.[0-9]'*' X $libpth`;
esac
$cat <<EOM
-
-Some versions of Unix support shared libraries, which make executables smaller
-but make load time slightly longer.
-
-On some systems, mostly System V Release 3's, the shared library is included
-by putting the option "-lc_s" as the last thing on the cc command line when
-linking. Other systems use shared libraries by default. There may be other
-libraries needed to compile $package on your machine as well. If your system
-needs the "-lc_s" option, include it here. Include any other special libraries
-here as well. Say "none" for none.
+
+In order to compile $package on your machine, a number of libraries
+are usually needed. Include any other special libraries here as well.
+Say "none" for none. The default list is almost always right.
EOM
echo " "
-rp="Any additional libraries?"
+rp="What libraries to use?"
. ./myread
case "$ans" in
none) libs=' ';;
esac;
fi'
-if ./osf1; then
- set signal.h __LANGUAGE_C__; eval $inctest
-else
- set signal.h LANGUAGE_C; eval $inctest
-fi
+set signal.h LANGUAGE_C; eval $inctest
+
+case "$usesocks" in
+$define)
+ ccflags="$ccflags -DSOCKS"
+ ;;
+esac
case "$hint" in
none|recommended) dflt="$ccflags $dflt" ;;
echo "Checking your choice of C compiler and flags for coherency..." >&4
$cat > try.c <<'EOF'
#include <stdio.h>
-main() { printf("Ok\n"); exit(0); }
+int main() { printf("Ok\n"); exit(0); }
EOF
set X $cc $optimize $ccflags -o try $ldflags try.c $libs
shift
$startsh
wanted=\$1
name=''
-if test -f $usrinc/\$wanted; then
- echo "$usrinc/\$wanted"
- exit 0
-fi
+for usrincdir in $usrinc
+do
+ if test -f \$usrincdir/\$wanted; then
+ echo "\$usrincdir/\$wanted"
+ exit 0
+ fi
+done
awkprg='{ print \$$fieldn }'
echo "#include <\$wanted>" > foo\$\$.c
$cppstdin $cppminus $cppflags < foo\$\$.c 2>/dev/null | \
while read cline; do
name=\`echo \$cline | $awk "\$awkprg" | $tr -d '"'\`
case "\$name" in
- */\$wanted) echo "\$name"; exit 0;;
- *) name='';;
+ *[/\\\\]\$wanted) echo "\$name"; exit 1;;
+ *[\\\\/]\$wanted) echo "\$name"; exit 1;;
+ *) exit 2;;
esac;
done;
+#
+# status = 0: grep returned 0 lines, case statement not executed
+# status = 1: headerfile found
+# status = 2: while loop executed, no headerfile found
+#
+status=\$?
$rm -f foo\$\$.c;
-case "\$name" in
-'') exit 1;;
-esac
+if test \$status -eq 1; then
+ exit 0;
+fi
+exit 1
EOF
chmod +x findhdr
fi
bin="$ans"
binexp="$ansexp"
-if $afs; then
- $cat <<EOM
+: Change installation prefix, if necessary.
+: XXX Bug? -- ignores Configure -Dinstallprefix setting.
+if $test X"$prefix" != X"$installprefix"; then
+ installbin=`echo $binexp | sed 's#^$prefix#$installprefix#'`
+else
+ installbin="$binexp"
+fi
-Since you are running AFS, I need to distinguish the directory in which
-executables reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
+: determine whether to install perl also as /usr/bin/perl
+echo " "
+if $test -d /usr/bin -a "X$installbin" != X/usr/bin; then
+ $cat <<EOM
+Many scripts expect to perl to be installed as /usr/bin/perl.
+I can install the perl you are about to compile also as /usr/bin/perl
+(in addition to $installbin/perl).
EOM
- case "$installbin" in
- '') dflt=`echo $binexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installbin";;
+ case "$installusrbinperl" in
+ "$undef"|[nN]*) dflt='n';;
+ *) dflt='y';;
+ esac
+ rp="Do you want to install perl as /usr/bin/perl?"
+ . ./myread
+ case "$ans" in
+ [yY]*) val="$define";;
+ *) val="$undef" ;;
esac
- fn=de~
- rp='Where will public executables be installed?'
- . ./getfile
- installbin="$ans"
else
- installbin="$binexp"
+ val="$undef"
fi
+set installusrbinperl
+eval $setvar
: define a shorthand compile call
compile='
eval $xscan;\
$contains '^fprintf$' libc.list >/dev/null 2>&1; then
eval $xrun
+elif com="sed -n -e 's/^__.*//' -e 's/[ ]*D[ ]*[0-9]*.*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
else
$nm -p $* 2>/dev/null >libc.tmp
$grep fprintf libc.tmp > libc.ptf
if $test -f /lib/syscalls.exp; then
echo " "
echo "Also extracting names from /lib/syscalls.exp for good ole AIX..." >&4
- $sed -n 's/^\([^ ]*\)[ ]*syscall$/\1/p' /lib/syscalls.exp >>libc.list
+ $sed -n 's/^\([^ ]*\)[ ]*syscall[0-9]*$/\1/p' /lib/syscalls.exp >>libc.list
fi
;;
esac
else tval=false;
fi;;
*)
- echo "main() { extern short $1$tdc; printf(\"%hd\", $1$tc); }" > t.c;
+ echo "int main() { extern short $1$tdc; printf(\"%hd\", $1$tc); }" > t.c;
if $cc $optimize $ccflags $ldflags -o t t.c $libs >/dev/null 2>&1;
then tval=true;
else tval=false;
EOM
case "$lddlflags" in
'') case "$osname" in
+ beos) dflt='-nostart' ;;
hpux) dflt='-b' ;;
linux|irix*) dflt='-shared' ;;
next) dflt='none' ;;
;;
*) case "$useshrplib" in
'') case "$osname" in
- svr4*|dgux|dynixptx|esix|powerux)
+ svr4*|dgux|dynixptx|esix|powerux|beos)
dflt=y
also='Building a shared libperl is required for dynamic loading to work on your system.'
;;
. ./myread
case "$ans" in
true|$define|[Yy]*)
- useshrplib='true'
- # Why does next4 have to be so different?
- case "${osname}${osvers}" in
- next4*) xxx='DYLD_LIBRARY_PATH' ;;
- os2*) xxx='' ;; # Nothing special needed.
- *) xxx='LD_LIBRARY_PATH' ;;
- esac
- if test X"$xxx" != "X"; then
- $cat <<EOM | $tee -a ../config.msg >&4
-
-To build perl, you must add the current working directory to your
-$xxx environment variable before running make. You can do
-this with
- $xxx=\`pwd\`:\$$xxx; export $xxx
-for Bourne-style shells, or
- setenv $xxx \`pwd\`
-for Csh-style shells. You *MUST* do this before running make.
-
-EOM
- fi
- ;;
+ useshrplib='true' ;;
*) useshrplib='false' ;;
esac
;;
*) $cat >&4 <<EOM
WARNING: Use of the shrpdir variable for the installation location of
the shared $libperl is not supported. It was never documented and
-will not work in this version. Let me (jhi@iki.fi)
+will not work in this version. Let me (perlbug@perl.com)
know of any problems this may cause.
EOM
next)
# next doesn't like the default...
;;
+ beos)
+ # beos doesn't like the default, either.
+ ;;
+ hpux*)
+ # hpux doesn't like the default, either.
+ tmp_shrpenv="env LDOPTS=\"+s +b${shrpdir}\""
+ ;;
*)
tmp_shrpenv="env LD_RUN_PATH=$shrpdir"
;;
;;
esac
fi
+# Fix ccdlflags in AIX for building external extensions.
+# (For building Perl itself bare -bE:perl.exp is needed,
+# Makefile.SH takes care of this.)
+case "$osname" in
+aix) ccdlflags="$ccdlflags -bE:$installarchlib/CORE/perl.exp" ;;
+esac
# Respect a hint or command-line value.
case "$shrpenv" in
'') shrpenv="$tmp_shrpenv" ;;
esac
+case "$ldlibpthname" in
+'') ldlibpthname=LD_LIBRARY_PATH ;;
+none) ldlibpthname='' ;;
+esac
: determine where manual pages go
set man1dir man1dir none
man1dir="$ans"
man1direxp="$ansexp"
case "$man1dir" in
-'') man1dir=' '
+'') man1dir=' '
installman1dir='';;
esac
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-manual pages reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-EOM
- case "$installman1dir" in
- '') dflt=`echo $man1direxp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installman1dir";;
- esac
- fn=de~
- rp='Where will man pages be installed?'
- . ./getfile
- installman1dir="$ans"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installman1dir=`echo $man1direxp | $sed 's#^$prefix#$installprefix#'`
else
installman1dir="$man1direxp"
fi
echo "If you don't want the manual sources installed, answer 'none'."
prog=`echo $package | $sed 's/-*[0-9.]*$//'`
case "$man3dir" in
-'') case "$prefix" in
- *$prog*) dflt=`echo $man1dir |
- $sed -e 's/man1/man3/g' -e 's/man\.1/man\.3/g'` ;;
- *) dflt="$privlib/man/man3" ;;
- esac
+'') dflt=`echo $man1dir | $sed -e 's/man1/man3/g' -e 's/man\.1/man\.3/g'`
+ if $test -d "$privlib/man/man3"; then
+ cat <<EOM >&4
+
+WARNING: Previous versions of perl installed man3 pages into
+$privlib/man/man3. This version will suggest a
+new default of $dflt.
+EOM
+ tdflt=$dflt
+ dflt='n'
+ rp='Do you wish to preserve the old behavior?(y/n)'
+ . ./myread
+ case "$ans" in
+ y*) dflt="$privlib/man/man3" ;;
+ *) dflt=$tdflt ;;
+ esac
+ fi
;;
' ') dflt=none;;
*) dflt="$man3dir" ;;
esac
echo " "
-
fn=dn+~
rp="Where do the $package library man pages (source) go?"
. ./getfile
-if test "X$man3direxp" != "X$ansexp"; then
- installman3dir=''
-fi
-
man3dir="$ans"
man3direxp="$ansexp"
-case "$man3dir" in
-'') man3dir=' '
+case "$man1dir" in
+'') man3dir=' '
installman3dir='';;
esac
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-manual pages reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-EOM
- case "$installman3dir" in
- '') dflt=`echo $man3direxp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installman3dir";;
- esac
- fn=de~
- rp='Where will man pages be installed?'
- . ./getfile
- installman3dir="$ans"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installman3dir=`echo $man3direxp | $sed 's#^$prefix#$installprefix#'`
else
installman3dir="$man3direxp"
fi
: What suffix to use on installed man pages
-
case "$man3dir" in
' ')
man3ext='0'
dflt="$bin"
: guess some guesses
$test -d /usr/share/scripts && dflt=/usr/share/scripts
- $test -d /usr/share/bin && dflt=/usr/share/bin
- $test -d /usr/local/script && dflt=/usr/local/script
- $test -d $prefixexp/script && dflt=$prefixexp/script
+ $test -d /usr/share/bin && dflt=/usr/share/bin
+ $test -d /usr/local/script && dflt=/usr/local/script
+ $test -d /usr/local/scripts && dflt=/usr/local/scripts
+ $test -d $prefixexp/script && dflt=$prefixexp/script
set dflt
eval $prefixup
;;
fi
scriptdir="$ans"
scriptdirexp="$ansexp"
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-scripts reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-
-EOM
- case "$installscript" in
- '') dflt=`echo $scriptdirexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installscript";;
- esac
- fn=de~
- rp='Where will public scripts be installed?'
- . ./getfile
- installscript="$ans"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installscript=`echo $scriptdirexp | sed 's#^$prefix#$installprefix#'`
else
installscript="$scriptdirexp"
fi
+$cat <<EOM
+
+After $package is installed, you may wish to install various
+add-on modules and utilities. Typically, these add-ons will
+be installed under $prefix with the rest
+of this package. However, you may wish to install such add-ons
+elsewhere under a different prefix.
+
+If you do not wish to put everything under a single prefix, that's
+ok. You will be prompted for the individual locations; this siteprefix
+is only used to suggest the defaults.
+
+The default should be fine for most people.
+
+EOM
+fn=d~+
+rp='Installation prefix to use for add-on modules and utilities?'
+: XXX Here might be another good place for an installstyle setting.
+case "$siteprefix" in
+'') dflt=$prefix ;;
+*) dflt=$siteprefix ;;
+esac
+. ./getfile
+oldsiteprefix=''
+case "$siteprefix" in
+'') ;;
+*)
+ case "$ans" in
+ "$prefix") ;;
+ *) oldsiteprefix="$prefix";;
+ esac
+ ;;
+esac
+siteprefix="$ans"
+siteprefixexp="$ansexp"
+
: determine where site specific libraries go.
-: Usual default is /usr/local/lib/perl5/site_perl/$apiversion
+: Usual default is /usr/local/lib/perl5/site_perl
+: The default "style" setting is made in installstyle.U
+: XXX No longer works with Prefixit stuff.
prog=`echo $package | $sed 's/-*[0-9.]*$//'`
-case "$prefix" in
-*perl*) set dflt sitelib lib/site_$prog/$apiversion ;;
-*) set dflt sitelib lib/$package/site_$prog/$apiversion ;;
+case "$installstyle" in
+*lib/perl5*) dflt=$siteprefix/lib/site_$prog/ ;;
+*) dflt=$siteprefix/lib/site_$prog ;;
esac
-eval $prefixit
$cat <<EOM
-The installation process will also create a directory for
-site-specific extensions and modules. Some users find it convenient
-to place all local files in this directory rather than in the main
-distribution directory.
+The installation process will create a directory for
+site-specific extensions and modules. Most users find it convenient
+to place all site-specific files in this directory rather than in the
+main distribution directory.
EOM
fn=d~+
rp='Pathname for the site-specific library files?'
. ./getfile
-if $test "X$sitelibexp" != "X$ansexp"; then
- installsitelib=''
-fi
sitelib="$ans"
sitelibexp="$ansexp"
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in
-which site-specific files reside from the directory in which they are
-installed (and from which they are presumably copied to the former
-directory by occult means).
-
-EOM
- case "$installsitelib" in
- '') dflt=`echo $sitelibexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installsitelib";;
- esac
- fn=de~
- rp='Where will site-specific files be installed?'
- . ./getfile
- installsitelib="$ans"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitelib=`echo $sitelibexp | sed 's#^$prefix#$installprefix#'`
else
installsitelib="$sitelibexp"
fi
: determine where site specific architecture-dependent libraries go.
-: sitelib default is /usr/local/lib/perl5/site_perl/$apiversion
+: sitelib default is /usr/local/lib/perl5/site_perl/
: sitearch default is /usr/local/lib/perl5/site_perl/$apiversion/$archname
: sitelib may have an optional trailing /share.
tdflt=`echo $sitelib | $sed 's,/share$,,'`
-tdflt="$tdflt/$archname"
+tdflt="$tdflt/$apiversion/$archname"
set sitearch sitearch none
eval $prefixit
case "$sitearch" in
fn=nd~+
rp='Pathname for the site-specific architecture-dependent library files?'
. ./getfile
-if $test "X$sitearchexp" != "X$ansexp"; then
- installsitearch=''
-fi
sitearch="$ans"
sitearchexp="$ansexp"
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in
-which site-specific architecture-dependent library files reside from
-the directory in which they are installed (and from which they are
-presumably copied to the former directory by occult means).
-
-EOM
- case "$installsitearch" in
- '') dflt=`echo $sitearchexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installsitearch";;
- esac
- fn=de~
- rp='Where will site-specific architecture-dependent files be installed?'
- . ./getfile
- installsitearch="$ans"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitearch=`echo $sitearchexp | sed 's#^$prefix#$installprefix#'`
else
installsitearch="$sitearchexp"
fi
#ifdef I_UNISTD
#include <unistd.h>
#endif
-main() {
+int main() {
exit(R_OK);
}
EOCP
echo "Checking to see how big your integers are..." >&4
$cat >intsize.c <<'EOCP'
#include <stdio.h>
-main()
+int main()
{
printf("intsize=%d;\n", sizeof(int));
printf("longsize=%d;\n", sizeof(long));
#include <sys/types.h>
#include <signal.h>
$signal_t blech(s) int s; { exit(3); }
-main()
+int main()
{
$xxx i32;
double f, g;
unsigned long dummy_long(p) unsigned long p; { return p; }
unsigned int dummy_int(p) unsigned int p; { return p; }
unsigned short dummy_short(p) unsigned short p; { return p; }
-main()
+int main()
{
double f;
unsigned long along;
$cat >vprintf.c <<'EOF'
#include <varargs.h>
-main() { xxx("foo"); }
+int main() { xxx("foo"); }
xxx(va_alist)
va_dcl
shift 2;
done > try.c;
echo "int main () { struct $struct foo; foo.$field = 0; }" >> try.c;
-if eval $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
val="$define";
else
val="$undef";
set lockf64 d_lockf64
eval $inlibc
+ : see if llseek exists
+ set llseek d_llseek
+ eval $inlibc
+
: see if lseek64 exists
set lseek64 d_lseek64
eval $inlibc
echo $n "Checking to see if your system supports off64_t...$c" >&4
$cat >try.c <<EOCP
#include <sys/types.h>
+#include <unistd.h>
off64_t foo() { off64_t x; x = 7; return x; }'
EOCP
if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
echo " Nope, it doesn't." >&4
fi
$rm -f try.*
- set d_off64t
+ set d_off64_t
+ eval $setvar
+
+ : check for offset_t
+ echo " "
+ echo $n "Checking to see if your system supports offset_t...$c" >&4
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+#include <unistd.h>
+offset_t foo() { offset_t x; x = 7; return x; }'
+EOCP
+ if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define"
+ echo " Yup, it does." >&4
+ else
+ val="$undef"
+ echo " Nope, it doesn't." >&4
+ fi
+ $rm -f try.*
+ set d_offset_t
eval $setvar
: check for ino64_t
else
echo " Nope, it doesn't." >&4
fi
- set d_ino64t
+ set d_ino64_t
eval $setvar
: check for struct flock64
else
val="$undef"
- for xxx in d_fstat64 d_ftruncate64 d_lockf64 d_lseek64 d_lstat64 d_open64 d_opendir64 d_readdir64 d_seekdir64 d_stat64 d_telldir64 d_truncate64 d_off64t d_ino64t d_flock64_s d_dirent64_s
+ for xxx in d_fstat64 d_ftruncate64 d_lockf64 d_lseek64 d_lstat64 d_open64 d_opendir64 d_readdir64 d_seekdir64 d_stat64 d_telldir64 d_truncate64 d_off64_t d_offset_t d_ino64_t d_flock64_s d_dirent64_s
do
set $xxx
eval $setvar
set endservent d_endsent
eval $inlibc
+: see if endspent exists
+set endspent d_endspent
+eval $inlibc
+
: Locate the flags for 'open()'
echo " "
$cat >open3.c <<'EOCP'
#ifdef I_SYS_FILE
#include <sys/file.h>
#endif
-main() {
+int main() {
if(O_RDONLY);
#ifdef O_TRUNC
exit(0);
'')
$cat head.c > try.c
$cat >>try.c <<'EOCP'
-main() {
+int main() {
#ifdef O_NONBLOCK
printf("O_NONBLOCK\n");
exit(0);
$signal_t blech(x) int x; { exit(3); }
EOCP
$cat >> try.c <<'EOCP'
-main()
+int main()
{
int pd[2];
int pu[2];
#ifdef I_SYSSELECT
#include <sys/select.h>
#endif
-main()
+int main()
{
struct tm foo;
#ifdef S_TIMEVAL
#ifdef I_SYS_SELECT
#include <sys/select.h>
#endif
-main() {
+int main() {
fd_set fds;
#ifdef TRYBITS
set fsetpos d_fsetpos
eval $inlibc
+: see if this is a sys/param system
+set sys/param.h i_sysparam
+eval $inhdr
+
+: see if this is a sys/mount.h system
+set sys/mount.h i_sysmount
+eval $inhdr
+
+
+: see if statfs exists
+set statfs d_statfs
+eval $inlibc
+
+: see if fstatfs exists
+set fstatfs d_fstatfs
+eval $inlibc
+
+: see if statfs knows about mount flags
+set d_statfsflags statfs f_flags $i_sysparam sys/param.h $i_sysmount sys/mount.h
+eval $hasfield
+
+
+: see if statvfs exists
+set statvfs d_statvfs
+eval $inlibc
+
+: see if fstatvfs exists
+set fstatvfs d_fstatvfs
+eval $inlibc
+
+
: see if ftello exists
set ftello d_ftello
eval $inlibc
: see how we will look up host name
echo " "
-if false; then
- : dummy stub to allow use of elif
-elif set gethostname val -f d_gethname; eval $csym; $val; then
+call=''
+if set gethostname val -f d_gethname; eval $csym; $val; then
echo 'gethostname() found.' >&4
d_gethname="$define"
call=gethostname
-elif set uname val -f d_uname; eval $csym; $val; then
+fi
+if set uname val -f d_uname; eval $csym; $val; then
if ./xenix; then
$cat <<'EOM'
uname() was found, but you're running xenix, and older versions of xenix
else
echo 'uname() found.' >&4
d_uname="$define"
- call=uname
+ case "$call" in
+ '') call=uname ;;
+ esac
fi
fi
case "$d_gethname" in
set getlogin d_getlogin
eval $inlibc
+: see if getmntent exists
+set getmntent d_getmntent
+eval $inlibc
+
: see if getnetbyaddr exists
set getnetbyaddr d_getnbyaddr
eval $inlibc
set d_getservprotos getservent $i_netdb netdb.h
eval $hasproto
+: see if getspent exists
+set getspent d_getspent
+eval $inlibc
+
+: see if getspnam exists
+set getspnam d_getspnam
+eval $inlibc
+
: see if gettimeofday or ftime exists
set gettimeofday d_gettimeod
eval $inlibc
;;
esac
+: see if hasmntopt exists
+set hasmntopt d_hasmntopt
+eval $inlibc
+
: see if this is a netinet/in.h or sys/in.h system
set netinet/in.h i_niin sys/in.h i_sysin
eval $inhdr
$cat >isascii.c <<'EOCP'
#include <stdio.h>
#include <ctype.h>
-main() {
+int main() {
int c = 'A';
if (isascii(c))
exit(0);
$echo $n "Checking to see how big your double precision numbers are...$c" >&4
$cat >try.c <<'EOCP'
#include <stdio.h>
-main()
+int main()
{
printf("%d\n", sizeof(double));
}
set lstat d_lstat
eval $inlibc
+: see if madvise exists
+set madvise d_madvise
+eval $inlibc
+
: see if mblen exists
set mblen d_mblen
eval $inlibc
set mbtowc d_mbtowc
eval $inlibc
+: see if memchr exists
+set memchr d_memchr
+eval $inlibc
+
: see if memcmp exists
set memcmp d_memcmp
eval $inlibc
set mktime d_mktime
eval $inlibc
+: see if this is a sys/mman.h system
+set sys/mman.h i_sysmman
+eval $inhdr
+
+: see if mmap exists
+set mmap d_mmap
+eval $inlibc
+: see what shmat returns
+: default to something harmless
+mmaptype='void *'
+case "$i_sysmman$d_mmap" in
+"$define$define")
+ $cat >mmap.c <<'END'
+#include <sys/mman.h>
+void *mmap();
+END
+ if $cc $ccflags -c mmap.c >/dev/null 2>&1; then
+ mmaptype='void *'
+ else
+ mmaptype='caddr_t'
+ fi
+ echo "and it returns ($mmaptype)." >&4
+ ;;
+esac
+
+
+
+: see if mprotect exists
+set mprotect d_mprotect
+eval $inlibc
+
: see if msgctl exists
set msgctl d_msgctl
eval $inlibc
set d_msg
eval $setvar
+: see if msync exists
+set msync d_msync
+eval $inlibc
+
+: see if munmap exists
+set munmap d_munmap
+eval $inlibc
+
: see if nice exists
set nice d_nice
eval $inlibc
-: how to create joinable pthreads
+: see if POSIX threads are available
if test "X$usethreads" = "X$define"; then
+ set pthread.h i_pthread
+ eval $inhdr
+else
+ i_pthread="$undef"
+fi
+
+
+
+: how to create joinable pthreads
+if test "X$usethreads" = "X$define" -a "X$i_pthread" = "X$define"; then
echo " "
echo "Checking what constant to use for creating joinable pthreads..." >&4
$cat >try.c <<'EOCP'
EOCP
set try -DJOINABLE=PTHREAD_CREATE_JOINABLE
if eval $compile; then
- echo "You seem to use PTHREAD_CREATE_JOINABLE." >&2
+ echo "You seem to use PTHREAD_CREATE_JOINABLE." >&4
val="$undef" # Yes, undef.
set d_old_pthread_create_joinable
eval $setvar
else
set try -DJOINABLE=PTHREAD_CREATE_UNDETACHED
if eval $compile; then
- echo "You seem to use PTHREAD_CREATE_UNDETACHED." >&2
+ echo "You seem to use PTHREAD_CREATE_UNDETACHED." >&4
val="$define"
set d_old_pthread_create_joinable
eval $setvar
else
set try -DJOINABLE=__UNDETACHED
if eval $compile; then
- echo "You seem to use __UNDETACHED." >&2
+ echo "You seem to use __UNDETACHED." >&4
val="$define"
set d_old_pthread_create_joinable
eval $setvar
set old_pthread_create_joinable
eval $setvar
else
- echo "Egads, nothing obvious found. Guessing that you use 0." >&2
+ echo "Egads, nothing obvious found. Guessing that you use 0." >&4
val="$define"
set d_old_pthread_create_joinable
eval $setvar
#ifdef I_UNISTD
# include <unistd.h> /* Needed for NetBSD */
#endif
-main()
+int main()
{
char buf[128], abc[128];
char *b;
#ifdef I_UNISTD
# include <unistd.h> /* Needed for NetBSD */
#endif
-main()
+int main()
{
char buf[128], abc[128];
char *b;
#ifdef I_UNISTD
# include <unistd.h> /* Needed for NetBSD */
#endif
-main()
+int main()
{
char a = -1;
char b = 0;
set setsid d_setsid
eval $inlibc
+: see if setspent exists
+set setspent d_setspent
+eval $inlibc
+
: see if setvbuf exists
set setvbuf d_setvbuf
eval $inlibc
#include <stdio.h>
#include <sys/types.h>
#include <signal.h>
-main()
+int main()
{
struct sigaction act, oact;
}
#include <setjmp.h>
sigjmp_buf env;
int set = 1;
-main()
+int main()
{
if (sigsetjmp(env,1))
exit(set);
: see if _ptr and _cnt from stdio act std
echo " "
-if $contains '_IO_fpos_t' `./findhdr stdio.h` >/dev/null 2>&1 ; then
+if $contains '_IO_fpos_t' `./findhdr stdio.h` `./findhdr libio.h` >/dev/null 2>&1 ; then
echo "(Looks like you have stdio.h from Linux.)"
case "$stdio_ptr" in
'') stdio_ptr='((fp)->_IO_read_ptr)'
#include <stdio.h>
#define FILE_ptr(fp) $stdio_ptr
#define FILE_cnt(fp) $stdio_cnt
-main() {
+int main() {
FILE *fp = fopen("try.c", "r");
char c = getc(fp);
if (
#include <stdio.h>
#define FILE_base(fp) $stdio_base
#define FILE_bufsiz(fp) $stdio_bufsiz
-main() {
+int main() {
FILE *fp = fopen("try.c", "r");
char c = getc(fp);
if (
set d_stdiobase
eval $setvar
+$cat >&4 <<EOM
+Checking how to access stdio streams by file descriptor number...
+EOM
+case "$stdio_stream_array" in
+'') $cat >try.c <<EOCP
+#include <stdio.h>
+int main() {
+ if (&STDIO_STREAM_ARRAY[fileno(stdin)] == stdin)
+ printf("yes\n");
+}
+EOCP
+ for s in _iob __iob __sF
+ do
+ set try -DSTDIO_STREAM_ARRAY=$s
+ if eval $compile; then
+ case "`./try$exe_ext`" in
+ yes) stdio_stream_array=$s; break ;;
+ esac
+ fi
+ done
+ $rm -f try.* try$exe_ext
+esac
+case "$stdio_stream_array" in
+'') $cat >&4 <<EOM
+I can't figure out how to access stdio streams by file descriptor number.
+EOM
+ d_stdio_stream_array="$undef"
+ ;;
+*) $cat >&4 <<EOM
+You can access stdio streams by file descriptor number by the $stdio_stream_array array.
+EOM
+ d_stdio_stream_array="$define"
+ ;;
+esac
+
: see if strcoll exists
set strcoll d_strcoll
eval $inlibc
set tcsetpgrp d_tcsetpgrp
eval $inlibc
+: see if sys/types.h has to be included
+set sys/types.h i_systypes
+eval $inhdr
+
+: see if prototype for telldir is available
+echo " "
+set d_telldirproto telldir $i_systypes sys/types.h $i_dirent dirent.h
+eval $hasproto
+
: define an is-a-typedef? function
typedef='type=$1; var=$2; def=$3; shift; shift; shift; inclist=$@;
case "$inclist" in
false) dflt='n';;
*) dflt='y';;
esac
- rp="Some systems have problems with vfork(). Do you want to use it?"
+ cat <<'EOM'
+
+Perl can only use a vfork() that doesn't suffer from strict
+restrictions on calling functions or modifying global data in
+the child. For example, glibc-2.1 contains such a vfork()
+that is unsuitable. If your system provides a proper fork()
+call, chances are that you do NOT want perl to use vfork().
+
+EOM
+ rp="Do you still want to use vfork()?"
. ./myread
case "$ans" in
y|Y) ;;
set sys/ndir.h i_sysndir
eval $inhdr
-: see if sys/types.h has to be included
-set sys/types.h i_systypes
-eval $inhdr
-
: see if closedir exists
set closedir d_closedir
eval $inlibc
RCSfile='$RCSfile'
Revision='$Revision'
+case "$crosscompile" in
+''|[nN]*) crosscompile="$undef" ;;
+esac
+
+case "$osname" in
+next|rhapsody) multiarch="$define" ;;
+esac
+case "$multiarch" in
+''|[nN]*) multiarch="$undef" ;;
+esac
+
: check for alignment requirements
echo " "
-case "$alignbytes" in
-'') echo "Checking alignment constraints..." >&4
- $cat >try.c <<'EOCP'
+case "$crosscompile$multiarch" in
+*$define*)
+ $cat <<EOM
+You seem to be either cross-compiling or doing a multiarchitecture build,
+skipping the memory alignment check.
+
+EOM
+ case "$alignbytes" in
+ '') alignbytes=8 ;;
+ esac
+ ;;
+*)
+ case "$alignbytes" in
+ '') echo "Checking alignment constraints..." >&4
+ $cat >try.c <<'EOCP'
struct foobar {
char foo;
double bar;
-} try;
-main()
+} try_algn;
+int main()
{
- printf("%d\n", (char *)&try.bar - (char *)&try.foo);
+ printf("%d\n", (char *)&try_algn.bar - (char *)&try_algn.foo);
}
EOCP
- set try
- if eval $compile_ok; then
- dflt=`./try`
- else
- dflt='8'
- echo "(I can't seem to compile the test program...)"
- fi
- ;;
-*) dflt="$alignbytes"
+ set try
+ if eval $compile_ok; then
+ dflt=`./try`
+ else
+ dflt='8'
+ echo "(I can't seem to compile the test program...)"
+ fi
+ ;;
+ *) dflt="$alignbytes"
+ ;;
+ esac
+ rp="Doubles must be aligned on a how-many-byte boundary?"
+ . ./myread
+ alignbytes="$ans"
+ $rm -f try.c try
;;
esac
-rp="Doubles must be aligned on a how-many-byte boundary?"
-. ./myread
-alignbytes="$ans"
-$rm -f try.c try
+
: check for ordering of bytes in a long
-case "$byteorder" in
-'')
- $cat <<'EOM'
-
+echo " "
+case "$crosscompile$multiarch" in
+*$define*)
+ $cat <<EOM
+You seem to be either cross-compiling or doing a multiarchitecture build,
+skipping the byteorder check.
+
+EOM
+ byteorder=''
+ ;;
+*)
+ case "$byteorder" in
+ '')
+ $cat <<'EOM'
In the following, larger digits indicate more significance. A big-endian
machine like a Pyramid or a Motorola 680?0 chip will come out to 4321. A
little-endian machine like a Vax or an Intel 80?86 chip would be 1234. Other
the test program works the default is probably right.
I'm now running the test program...
EOM
- $cat >try.c <<'EOCP'
+ $cat >try.c <<'EOCP'
#include <stdio.h>
-main()
+int main()
{
int i;
union {
exit(0);
}
EOCP
- xxx_prompt=y
- set try
- if eval $compile && ./try > /dev/null; then
- dflt=`./try`
- case "$dflt" in
- [1-4][1-4][1-4][1-4]|12345678|87654321)
- echo "(The test program ran ok.)"
- echo "byteorder=$dflt"
- xxx_prompt=n
+ xxx_prompt=y
+ set try
+ if eval $compile && ./try > /dev/null; then
+ dflt=`./try`
+ case "$dflt" in
+ [1-4][1-4][1-4][1-4]|12345678|87654321)
+ echo "(The test program ran ok.)"
+ echo "byteorder=$dflt"
+ xxx_prompt=n
;;
- ????|????????) echo "(The test program ran ok.)" ;;
- *) echo "(The test program didn't run right for some reason.)" ;;
- esac
- else
- dflt='4321'
- cat <<'EOM'
+ ????|????????) echo "(The test program ran ok.)" ;;
+ *) echo "(The test program didn't run right for some reason.)" ;;
+ esac
+ else
+ dflt='4321'
+ cat <<'EOM'
(I can't seem to compile the test program. Guessing big-endian...)
EOM
- fi
- case "$xxx_prompt" in
- y)
- rp="What is the order of bytes in a long?"
- . ./myread
- byteorder="$ans"
- ;;
- *) byteorder=$dflt
+ fi
+ case "$xxx_prompt" in
+ y)
+ rp="What is the order of bytes in a long?"
+ . ./myread
+ byteorder="$ans"
+ ;;
+ *) byteorder=$dflt
+ ;;
+ esac
;;
esac
+ $rm -f try.c try
;;
esac
-$rm -f try.c try
+
: how do we catenate cpp tokens here?
echo " "
#include <sys/types.h>
#include <stdio.h>
#include <db.h>
-main()
+int main()
{
#ifdef DB_VERSION_MAJOR /* DB version >= 2 */
int Major, Minor, Patch ;
{
}
HASHINFO info;
-main()
+int main()
{
info.hash = hash_cb;
}
{
}
BTREEINFO info;
-main()
+int main()
{
info.prefix = prefix_cb;
}
#endif
exit(0);
}
-main() { sub(); }
+int main() { sub(); }
EOCP
if $cc $ccflags -c -DTRY=$defvoidused try.c >.out 2>&1 ; then
voidflags=$defvoidused
#ifdef I_STDLIB
# include <stdlib.h>
#endif
-main()
+int main()
{
register int i;
register unsigned long tmp;
echo "You have EBCDIC." >&4
val="$define"
else
- echo "Nope, no EBCDIC. Assuming ASCII or some ISO Latin." >&4
+ echo "Nope, no EBCDIC. Assuming ASCII or some ISO Latin, or UTF." >&4
fi
else
echo "I'm unable to compile the test program." >&4
set ebcdic
eval $setvar
+echo " "
+$cat >&4 <<EOM
+Checking how to flush all pending stdio output...
+EOM
+# I only know how to find the first 32 possibly open files on SunOS.
+# See also hints/sunos_4_1.sh and util.c --AD
+case "$osname" in
+sunos) $echo '#define PERL_FFLUSH_ALL_FOPEN_MAX 32' > try.c ;;
+esac
+$cat >>try.c <<EOCP
+#include <stdio.h>
+#$i_unistd I_UNISTD
+#ifdef I_UNISTD
+# include <unistd.h>
+#endif
+#$d_sysconf HAS_SYSCONF
+#$d_stdio_stream_array HAS_STDIO_STREAM_ARRAY
+#ifdef HAS_STDIO_STREAM_ARRAY
+# define STDIO_STREAM_ARRAY $stdio_stream_array
+#endif
+int main() {
+ FILE* p = fopen("try.out", "w");
+#ifdef TRY_FPUTC
+ fputc('x', p);
+#else
+# ifdef TRY_FPRINTF
+ fprintf(p, "x");
+# endif
+#endif
+#ifdef TRY_FFLUSH_NULL
+ fflush(NULL);
+#endif
+#ifdef TRY_FFLUSH_ALL
+ {
+ long open_max = -1;
+# ifdef PERL_FFLUSH_ALL_FOPEN_MAX
+ open_max = PERL_FFLUSH_ALL_FOPEN_MAX;
+# else
+# if defined(HAS_SYSCONF) && defined(_SC_OPEN_MAX)
+ open_max = sysconf(_SC_OPEN_MAX);
+# else
+# ifdef FOPEN_MAX
+ open_max = FOPEN_MAX;
+# else
+# ifdef OPEN_MAX
+ open_max = OPEN_MAX;
+# else
+# ifdef _NFILE
+ open_max = _NFILE;
+# endif
+# endif
+# endif
+# endif
+# endif
+# ifdef HAS_STDIO_STREAM_ARRAY
+ if (open_max > 0) {
+ long i;
+ for (i = 0; i < open_max; i++)
+ if (STDIO_STREAM_ARRAY[i]._file >= 0 &&
+ STDIO_STREAM_ARRAY[i]._file < open_max &&
+ STDIO_STREAM_ARRAY[i]._flag)
+ fflush(&STDIO_STREAM_ARRAY[i]);
+ }
+ }
+# endif
+#endif
+ _exit(42);
+}
+EOCP
+: first we have to find out how _not_ to flush
+if $test "X$fflushNULL" = X -o "X$fflushall" = X; then
+ output=''
+ set try -DTRY_FPUTC
+ if eval $compile; then
+ $rm -f try.out
+ ./try$exe_ext 2>/dev/null
+ if $test ! -s try.out -a "X$?" = X42; then
+ output=-DTRY_FPUTC
+ fi
+ fi
+ case "$output" in
+ '')
+ set try -DTRY_FPRINTF
+ $rm -f try.out
+ if eval $compile; then
+ $rm -f try.out
+ ./try$exe_ext 2>/dev/null
+ if $test ! -s try.out -a "X$?" = X42; then
+ output=-DTRY_FPRINTF
+ fi
+ fi
+ ;;
+ esac
+fi
+: check for fflush NULL behaviour
+case "$fflushNULL" in
+'') set try -DTRY_FFLUSH_NULL $output
+ if eval $compile; then
+ $rm -f try.out
+ ./try$exe_ext 2>/dev/null
+ code="$?"
+ if $test -s try.out -a "X$code" = X42; then
+ fflushNULL="`$cat try.out`"
+ else
+ if $test "X$code" != X42; then
+ $cat >&4 <<EOM
+(If this test failed, don't worry, we'll try another method shortly.)
+EOM
+ fi
+ fi
+ fi
+ $rm -f core try.core core.try.*
+ case "$fflushNULL" in
+ x) $cat >&4 <<EOM
+Your fflush(NULL) works okay.
+EOM
+ fflushNULL="$define"
+ ;;
+ '') $cat >&4 <<EOM
+Your fflush(NULL) isn't working (contrary to ANSI C).
+EOM
+ fflushNULL="$undef"
+ ;;
+ *) $cat >&4 <<EOM
+Cannot figure out whether your fflush(NULL) works or not.
+I'm assuming it doesn't (contrary to ANSI C).
+EOM
+ fflushNULL="$undef"
+ ;;
+ esac
+ ;;
+$define|true|[yY]*)
+ fflushNULL="$define"
+ ;;
+*)
+ fflushNULL="$undef"
+ ;;
+esac
+: check explicit looping only if NULL did not work
+case "$fflushNULL" in
+"$undef")
+ : check for fflush all behaviour
+ case "$fflushall" in
+ '') set try -DTRY_FFLUSH_ALL $output
+ if eval $compile; then
+ $cat >&4 <<EOM
+(Now testing the other method--but note that also this may fail.)
+EOM
+ $rm -f try.out
+ ./try$exe_ext 2>/dev/null
+ if $test -s try.out -a "X$?" = X42; then
+ fflushall="`$cat try.out`"
+ fi
+ fi
+ $rm -f core try.core core.try.*
+ case "$fflushall" in
+ x) $cat >&4 <<EOM
+Whew. Flushing explicitly all the stdio streams works.
+EOM
+ fflushall="$define"
+ ;;
+ '') $cat >&4 <<EOM
+Sigh. Flushing explicitly all the stdio streams doesn't work.
+EOM
+ fflushall="$undef"
+ ;;
+ *) $cat >&4 <<EOM
+Cannot figure out whether flushing stdio streams explicitly works or not.
+I'm assuming it doesn't.
+EOM
+ fflushall="$undef"
+ ;;
+ esac
+ ;;
+ "$define"|true|[yY]*)
+ fflushall="$define"
+ ;;
+ *)
+ fflushall="$undef"
+ ;;
+ esac
+ ;;
+*) fflushall="$undef"
+ ;;
+esac
+case "$fflushNULL$fflushall" in
+undefundef)
+ $cat <<EOM
+I cannot figure out how to flush pending stdio output.
+EOM
+ ;;
+esac
+$rm -f try.* try$exe_ext
+
: see what type file positions are declared as in the library
rp="What is the type for file position used by fsetpos()?"
set fpos_t fpostype long stdio.h sys/types.h
eval $typedef_ask
+: Store the full pathname to the ar program for use in the C program
+: Respect a hint or command line value for full_ar.
+case "$full_ar" in
+'') full_ar=$ar ;;
+esac
+
: Store the full pathname to the sed program for use in the C program
full_sed=$sed
fi
$cat >>try.c <<'EOCP'
#include <stdio.h>
-main()
+int main()
{
printf("%d\n", sizeof(VOID_PTR));
exit(0);
echo 'int bar1() { return bar2(); }' > bar1.c
echo 'int bar2() { return 2; }' > bar2.c
$cat > foo.c <<'EOP'
-main() { printf("%d\n", bar1()); exit(0); }
+int main() { printf("%d\n", bar1()); exit(0); }
EOP
$cc $ccflags -c bar1.c >/dev/null 2>&1
$cc $ccflags -c bar2.c >/dev/null 2>&1
#ifdef I_SYS_SELECT
#include <sys/select.h>
#endif
+#$d_socket HAS_SOCKET
+#ifdef HAS_SOCKET
+# include <sys/socket.h> /* Might include <sys/bsdtypes.h> */
+#endif
#include <stdio.h>
$selecttype b;
#define S sizeof(*(b))
: Trace out the files included by signal.h, then look for SIGxxx names.
: Remove SIGARRAYSIZE used by HPUX.
+: Remove SIGSTKSIZE used by Linux.
+: Remove SIGSTKSZ used by Posix.
: Remove SIGTYP void lines used by OS2.
xxx=`echo '#include <signal.h>' |
$cppstdin $cppminus $cppflags 2>/dev/null |
'') xxxfiles=`./findhdr signal.h` ;;
esac
xxx=`awk '
-$1 ~ /^#define$/ && $2 ~ /^SIG[A-Z0-9]*$/ && $2 !~ /SIGARRAYSIZE/ && $3 !~ /void/ {
+$1 ~ /^#define$/ && $2 ~ /^SIG[A-Z0-9]*$/ && $2 !~ /SIGARRAYSIZE/ && $2 !~ /SIGSTKSIZE/ && $2 !~ /SIGSTKSZ/ && $3 !~ /void/ {
print substr($2, 4, 20)
}
$1 == "#" && $2 ~ /^define$/ && $3 ~ /^SIG[A-Z0-9]*$/ && $3 !~ /SIGARRAYSIZE/ && $4 !~ /void/ {
sig_name[$2] = $1
sig_num[$2] = $2
}
-
}
END {
- if (nsig == 0) { nsig = maxsig + 1 }
- for (n = 1; n < nsig; n++) {
- if (sig_name[n]) {
- printf("%s %d\n", sig_name[n], sig_num[n])
- }
- else {
- printf("NUM%d %d\n", n, n)
- }
+ if (nsig == 0) {
+ nsig = maxsig + 1
+ }
+ printf("NSIG %d\n", nsig);
+ for (n = 1; n < nsig; n++) {
+ if (sig_name[n]) {
+ printf("%s %d\n", sig_name[n], sig_num[n])
}
+ else {
+ printf("NUM%d %d\n", n, n)
+ }
+ }
for (n = 0; n < ndups; n++) {
- printf("%s %d\n", dup_name[n], dup_num[n])
+ printf("%s %d\n", dup_name[n], dup_num[n])
}
}
EOP
0) set HUP INT QUIT ILL TRAP ABRT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM;;
esac
echo $@ | $tr ' ' $trnl | \
- $awk '{ printf $1; printf " %d\n", ++s; }' >signal.lst
+ $awk '{ printf "%s %d\n", $1, ++s; }
+ END { printf "NSIG %d\n", ++s }' >signal.lst
fi
$rm -f signal.c signal$_exe signal$_o signal.nsg signal.ls1
EOS
yes)
echo "Generating a list of signal names and numbers..." >&4
. ./signal_cmd
- sig_name=`$awk '{printf "%s ", $1}' signal.lst`
- sig_name="ZERO $sig_name"
- sig_name_init=`$awk 'BEGIN { printf "\"ZERO\", " }
- { printf "\"%s\", ", $1 }
- END { printf "0\n" }' signal.lst`
- sig_num=`$awk '{printf "%d ", $2}' signal.lst`
- sig_num="0 $sig_num"
- sig_num_init=`$awk 'BEGIN { printf "0, " }
- { printf "%d, ", $2}
- END { printf "0\n"}' signal.lst`
- ;;
-esac
-echo "The following signals are available:"
+ sig_count=`$awk '/^NSIG/ { printf "%d", $2 }' signal.lst`
+ sig_name=`$awk 'BEGIN { printf "ZERO " }
+ !/^NSIG/ { printf "%s ", $1 }' signal.lst`
+ sig_num=`$awk 'BEGIN { printf "0 " }
+ !/^NSIG/ { printf "%d ", $2 }' signal.lst`
+ sig_name_init=`$awk 'BEGIN { printf "\"ZERO\", " }
+ !/^NSIG/ { printf "\"%s\", ", $1 }
+ END { printf "0\n" }' signal.lst`
+ sig_num_init=`$awk 'BEGIN { printf "0, " }
+ !/^NSIG/ { printf "%d, ", $2}
+ END { printf "0\n"}' signal.lst`
+ ;;
+esac
+echo "The following $sig_count signals are available:"
echo " "
echo $sig_name | $awk \
'BEGIN { linelen = 0 }
#include <sys/types.h>
#define Size_t $sizetype
#define SSize_t $dflt
-main()
+int main()
{
if (sizeof(Size_t) == sizeof(SSize_t))
printf("$dflt\n");
set math.h i_math
eval $inhdr
+: see if this is a mntent.h system
+set mntent.h i_mntent
+eval $inhdr
+
: see if ndbm.h is available
set ndbm.h t_ndbm
eval $inhdr
set i_neterrno
eval $setvar
+: see if netinet/tcp.h is available
+set netinet/tcp.h i_netinettcp
+eval $inhdr
+
: see if this is a poll.h system
set poll.h i_poll
eval $inhdr
./Cppsym -l $al | $sort | $grep -v '^$' >Cppsym.true
: now check the C compiler for additional symbols
+postprocess_cc_v=''
+case "$osname" in
+aix) postprocess_cc_v="|$tr , ' '" ;;
+esac
$cat >ccsym <<EOS
$startsh
$cat >tmp.c <<EOF
extern int foo;
EOF
-for i in \`$cc -v -c tmp.c 2>&1\`
+for i in \`$cc -v -c tmp.c 2>&1 $postprocess_cc_v\`
do
case "\$i" in
-D*) echo "\$i" | $sed 's/^-D//';;
done
$rm -f try.c
EOS
+postprocess_cc_v=''
chmod +x ccsym
$eunicefix ccsym
./ccsym > ccsym1.raw
$comm -12 ccsym.true ccsym.list >ccsym.com
$comm -23 ccsym.true ccsym.list >ccsym.cpp
also=''
-symbols='symbols'
if $test -z ccsym.raw; then
- echo "Your C compiler doesn't seem to define any symbol!" >&4
+ echo "Your C compiler doesn't seem to define any symbols!" >&4
echo " "
- echo "However, your C preprocessor defines the following ones:"
+ echo "However, your C preprocessor defines the following symbols:"
$cat Cppsym.true
+ ccsymbols=''
+ cppsymbols=`$cat Cppsym.true`
+ cppsymbols=`echo $cppsymbols`
+ cppccsymbols="$cppsymbols"
else
if $test -s ccsym.com; then
echo "Your C compiler and pre-processor define these symbols:"
$sed -e 's/\(.*\)=.*/\1/' ccsym.com
also='also '
symbols='ones'
+ cppccsymbols=`$cat ccsym.com`
+ cppccsymbols=`echo $cppccsymbols`
$test "$silent" || sleep 1
fi
if $test -s ccsym.cpp; then
$test "$also" && echo " "
- echo "Your C pre-processor ${also}defines the following $symbols:"
+ echo "Your C pre-processor ${also}defines the following symbols:"
$sed -e 's/\(.*\)=.*/\1/' ccsym.cpp
also='further '
+ cppsymbols=`$cat ccsym.cpp`
+ cppsymbols=`echo $cppsymbols`
$test "$silent" || sleep 1
fi
if $test -s ccsym.own; then
$test "$also" && echo " "
- echo "Your C compiler ${also}defines the following cpp variables:"
+ echo "Your C compiler ${also}defines the following cpp symbols:"
$sed -e 's/\(.*\)=1/\1/' ccsym.own
$sed -e 's/\(.*\)=.*/\1/' ccsym.own | $uniq >>Cppsym.true
+ ccsymbols=`$cat ccsym.own`
+ ccsymbols=`echo $ccsymbols`
$test "$silent" || sleep 1
fi
fi
val=$val2; set i_sgtty; eval $setvar
val=$val3; set i_termios; eval $setvar
+: see if this is a shadow.h system
+set shadow.h i_shadow
+eval $inhdr
+
+: see if this is a socks.h system
+set socks.h i_socks
+eval $inhdr
+
: see if stdarg is available
echo " "
if $test `./findhdr stdarg.h`; then
set i_sysioctl
eval $setvar
-: see if this is a sys/param system
-set sys/param.h i_sysparam
-eval $inhdr
-
: see if sys/resource.h has to be included
set sys/resource.h i_sysresrc
eval $inhdr
set sys/security.h i_syssecrt
eval $inhdr
+: see if this is a sys/statvfs.h system
+set sys/statvfs.h i_sysstatvfs
+eval $inhdr
+
: see if this is a sys/un.h system
set sys/un.h i_sysun
eval $inhdr
echo " "
echo "Looking for extensions..." >&4
-tdir=`pwd`
-cd $rsrc/ext
: If we are using the old config.sh, known_extensions may contain
: old or inaccurate or duplicate values.
known_extensions=''
: We do not just use MANIFEST because the user may have dropped
: some additional extensions into the source tree and expect them
: to be built.
-for xxx in * ; do
- case "$xxx" in
- DynaLoader|dynaload) ;;
- *) if $test -f $xxx/$xxx.xs; then
- known_extensions="$known_extensions $xxx"
- elif $test -f $xxx/Makefile.PL; then
- nonxs_extensions="$nonxs_extensions $xxx"
- else
- if $test -d $xxx; then
- # Look for nested extensions, eg. Devel/Dprof.
- cd $xxx
- for yyy in * ; do
- if $test -f $yyy/$yyy.xs; then
- known_extensions="$known_extensions $xxx/$yyy"
- elif $test -f $yyy/Makefile.PL; then
- nonxs_extensions="$nonxs_extensions $xxx/$yyy"
- fi
- done
- cd ..
- fi
- fi
- ;;
- esac
-done
+
+: Function to recursively find available extensions, ignoring DynaLoader
+: NOTE: recursion limit of 10 to prevent runaway in case of symlink madness
+find_extensions='
+ for xxx in *; do
+ case "$xxx" in
+ DynaLoader|dynaload) ;;
+ *)
+ if $test -f $xxx/$xxx.xs; then
+ known_extensions="$known_extensions $1$xxx";
+ elif $test -f $xxx/Makefile.PL; then
+ nonxs_extensions="$nonxs_extensions $1$xxx";
+ else
+ if $test -d $xxx -a $# -lt 10; then
+ set $1$xxx/ $*;
+ cd $xxx;
+ eval $find_extensions;
+ cd ..;
+ shift;
+ fi
+ fi
+ ;;
+ esac
+ done'
+tdir=`pwd`
+cd $rsrc/ext
+set
+shift
+eval $find_extensions
set X $nonxs_extensions
shift
nonxs_extensions="$*"
cccdlflags='$cccdlflags'
ccdlflags='$ccdlflags'
ccflags='$ccflags'
+ccsymbols='$ccsymbols'
cf_by='$cf_by'
cf_email='$cf_email'
cf_time='$cf_time'
cpio='$cpio'
cpp='$cpp'
cpp_stuff='$cpp_stuff'
+cppccsymbols='$cppccsymbols'
cppflags='$cppflags'
cpplast='$cpplast'
cppminus='$cppminus'
cpprun='$cpprun'
cppstdin='$cppstdin'
+cppsymbols='$cppsymbols'
+crosscompile='$crosscompile'
cryptlib='$cryptlib'
csh='$csh'
d_Gconvert='$d_Gconvert'
d_endpent='$d_endpent'
d_endpwent='$d_endpwent'
d_endsent='$d_endsent'
+d_endspent='$d_endspent'
d_eofnblk='$d_eofnblk'
d_eunice='$d_eunice'
d_fchmod='$d_fchmod'
d_fsetpos64='$d_fsetpos64'
d_fsetpos='$d_fsetpos'
d_fstat64='$d_fstat64'
+d_fstatfs='$d_fstatfs'
+d_fstatvfs='$d_fstatvfs'
d_ftell64='$d_ftell64'
d_ftello64='$d_ftello64'
d_ftello='$d_ftello'
d_gethname='$d_gethname'
d_gethostprotos='$d_gethostprotos'
d_getlogin='$d_getlogin'
+d_getmntent='$d_getmntent'
d_getnbyaddr='$d_getnbyaddr'
d_getnbyname='$d_getnbyname'
d_getnent='$d_getnent'
d_getsbyport='$d_getsbyport'
d_getsent='$d_getsent'
d_getservprotos='$d_getservprotos'
+d_getspent='$d_getspent'
+d_getspnam='$d_getspnam'
d_gettimeod='$d_gettimeod'
d_gnulibc='$d_gnulibc'
d_grpasswd='$d_grpasswd'
+d_hasmntopt='$d_hasmntopt'
d_htonl='$d_htonl'
d_index='$d_index'
d_inetaton='$d_inetaton'
-d_ino64t='$d_ino64t'
+d_ino64_t='$d_ino64_t'
d_int64t='$d_int64t'
d_iovec_s='$d_iovec_s'
d_isascii='$d_isascii'
d_killpg='$d_killpg'
d_lchown='$d_lchown'
d_link='$d_link'
+d_llseek='$d_llseek'
d_locconv='$d_locconv'
d_lockf64='$d_lockf64'
d_lockf='$d_lockf'
d_lseek64='$d_lseek64'
d_lstat64='$d_lstat64'
d_lstat='$d_lstat'
+d_madvise='$d_madvise'
d_mblen='$d_mblen'
d_mbstowcs='$d_mbstowcs'
d_mbtowc='$d_mbtowc'
+d_memchr='$d_memchr'
d_memcmp='$d_memcmp'
d_memcpy='$d_memcpy'
d_memmove='$d_memmove'
d_mkdir='$d_mkdir'
d_mkfifo='$d_mkfifo'
d_mktime='$d_mktime'
+d_mmap='$d_mmap'
+d_mprotect='$d_mprotect'
d_msg='$d_msg'
d_msg_ctrunc='$d_msg_ctrunc'
d_msg_dontroute='$d_msg_dontroute'
d_msghdr_s='$d_msghdr_s'
d_msgrcv='$d_msgrcv'
d_msgsnd='$d_msgsnd'
+d_msync='$d_msync'
+d_munmap='$d_munmap'
d_mymalloc='$d_mymalloc'
d_nextkey64='$d_nextkey64'
d_nice='$d_nice'
-d_off64t='$d_off64t'
+d_off64_t='$d_off64_t'
+d_offset_t='$d_offset_t'
d_old_pthread_create_joinable='$d_old_pthread_create_joinable'
d_oldpthreads='$d_oldpthreads'
d_oldsock='$d_oldsock'
d_setruid='$d_setruid'
d_setsent='$d_setsent'
d_setsid='$d_setsid'
+d_setspent='$d_setspent'
d_setvbuf='$d_setvbuf'
d_sfio='$d_sfio'
d_shm='$d_shm'
d_sockpair='$d_sockpair'
d_stat64='$d_stat64'
d_statblks='$d_statblks'
+d_statfs='$d_statfs'
+d_statfsflags='$d_statfsflags'
+d_statvfs='$d_statvfs'
d_stdio_cnt_lval='$d_stdio_cnt_lval'
d_stdio_ptr_lval='$d_stdio_ptr_lval'
+d_stdio_stream_array='$d_stdio_stream_array'
d_stdiobase='$d_stdiobase'
d_stdstdio='$d_stdstdio'
d_store64='$d_store64'
d_tcsetpgrp='$d_tcsetpgrp'
d_telldir64='$d_telldir64'
d_telldir='$d_telldir'
+d_telldirproto='$d_telldirproto'
d_time='$d_time'
d_times='$d_times'
d_tmpfile64='$d_tmpfile64'
exe_ext='$exe_ext'
expr='$expr'
extensions='$extensions'
+fflushNULL='$fflushNULL'
+fflushall='$fflushall'
find='$find'
firstmakefile='$firstmakefile'
flex='$flex'
fpostype='$fpostype'
freetype='$freetype'
+full_ar='$full_ar'
full_csh='$full_csh'
full_sed='$full_sed'
gccversion='$gccversion'
i_malloc='$i_malloc'
i_math='$i_math'
i_memory='$i_memory'
+i_mntent='$i_mntent'
i_ndbm='$i_ndbm'
i_netdb='$i_netdb'
i_neterrno='$i_neterrno'
+i_netinettcp='$i_netinettcp'
i_niin='$i_niin'
i_poll='$i_poll'
+i_pthread='$i_pthread'
i_pwd='$i_pwd'
i_rpcsvcdbm='$i_rpcsvcdbm'
i_sfio='$i_sfio'
i_sgtty='$i_sgtty'
+i_shadow='$i_shadow'
+i_socks='$i_socks'
i_stdarg='$i_stdarg'
i_stddef='$i_stddef'
i_stdlib='$i_stdlib'
i_sysfilio='$i_sysfilio'
i_sysin='$i_sysin'
i_sysioctl='$i_sysioctl'
+i_sysmman='$i_sysmman'
+i_sysmount='$i_sysmount'
i_sysndir='$i_sysndir'
i_sysparam='$i_sysparam'
i_sysresrc='$i_sysresrc'
i_sysselct='$i_sysselct'
i_syssockio='$i_syssockio'
i_sysstat='$i_sysstat'
+i_sysstatvfs='$i_sysstatvfs'
i_systime='$i_systime'
i_systimek='$i_systimek'
i_systimes='$i_systimes'
installbin='$installbin'
installman1dir='$installman1dir'
installman3dir='$installman3dir'
+installprefix='$installprefix'
+installprefixexp='$installprefixexp'
installprivlib='$installprivlib'
installscript='$installscript'
installsitearch='$installsitearch'
installsitelib='$installsitelib'
+installstyle='$installstyle'
+installusrbinperl='$installusrbinperl'
intsize='$intsize'
known_extensions='$known_extensions'
ksh='$ksh'
ld='$ld'
lddlflags='$lddlflags'
ldflags='$ldflags'
+ldlibpthname='$ldlibpthname'
less='$less'
lib_ext='$lib_ext'
libc='$libc'
mips='$mips'
mips_type='$mips_type'
mkdir='$mkdir'
+mmaptype='$mmaptype'
models='$models'
modetype='$modetype'
more='$more'
+multiarch='$multiarch'
mv='$mv'
myarchname='$myarchname'
mydomain='$mydomain'
shortsize='$shortsize'
shrpenv='$shrpenv'
shsharp='$shsharp'
+sig_count='$sig_count'
sig_name='$sig_name'
sig_name_init='$sig_name_init'
sig_num='$sig_num'
sitearchexp='$sitearchexp'
sitelib='$sitelib'
sitelibexp='$sitelibexp'
+siteprefix='$siteprefix'
+siteprefixexp='$siteprefixexp'
sizetype='$sizetype'
sleep='$sleep'
smail='$smail'
stdio_cnt='$stdio_cnt'
stdio_filbuf='$stdio_filbuf'
stdio_ptr='$stdio_ptr'
+stdio_stream_array='$stdio_stream_array'
strings='$strings'
submit='$submit'
subversion='$subversion'
useposix='$useposix'
usesfio='$usesfio'
useshrplib='$useshrplib'
+usesocks='$usesocks'
usethreads='$usethreads'
usevfork='$usevfork'
usrinc='$usrinc'
: add special variables
$test -f $src/patchlevel.h && \
-awk '/^#define/ {printf "%s=%s\n",$2,$3}' $src/patchlevel.h >>config.sh
-echo "CONFIG=true" >>config.sh
+awk '/^#define[ ]+PERL_/ {printf "%s=%s\n",$2,$3}' $src/patchlevel.h >>config.sh
+echo "CONFIGDOTSH=true" >>config.sh
: propagate old symbols
if $test -f UU/config.sh; then
projects / p5sagit/p5-mst-13.2.git / blobdiff